Debian Codegraph @

texmf-dist/source/latex/sffms/sffms.dtx

raw
1 % \iffalse meta-comment
2 %
3 % Copyright 2002-2003 M. C. DeMarco
4 % Also copyright any individual authors listed in this file.
5 %
6 % This file provides the latex class sffms.cls and supporting files.
7 % ------------------------------------------------------------------
8 %
9 % It may be distributed and/or modified under the conditions of the
10 % LaTeX Project Public License, either version 1.2 of this license or
11 % (at your option) any later version.
12 % The latest version of this license is in
13 % http://www.latex-project.org/lppl.txt
14 % and version 1.2 or later is part of all distributions of LaTeX
15 % version 1999/12/01 or later.
16 %
17 % ** To produce the package documentation, run latex on this file. **
18 %
19 % \fi
20 %
21 % \iffalse
22 %<*driver>
23 \documentclass{ltxdoc}
24 \OnlyDescription % Comment out to print the code as well
25 \begin{document}
26 \title{The \textsf{sffms} package}
27 \author{M. C. DeMarco\\
28 \texttt{[email protected]}}
29 \date{2003/03/13}
30 \maketitle
31 \DocInput{sffms.dtx}
32 \end{document}
33 %</driver>
34 % \section{Identification}
35 % \begin{macrocode}
36 %<sffms>\NeedsTeXFormat{LaTeX2e}
37 %<sffms>\ProvidesClass{sffms}[2003/03/13 v2.0
38 %<smart>\ProvidesPackage{sffsmart}[2001/09/10 v1.0
39 %<dumb>\ProvidesPackage{sffdumb}[2001/09/23 v1.1
40 %<sffms> The SF/F manuscript class]
41 %<smart|dumb> Quotation mark utility for sffms.cls]
42 % \end{macrocode}
43 % \fi
44 %
45 % \changes{v0.1}{2001/08/29}{Created sffms.cls from sfms.cls by Kevin
46 % Russell}
47 % \changes{v0.1}{2001/08/29}{Passed all options to report.cls, making
48 % the non-submission format mostly transparent. The only additions
49 % were real typeset scene breaks (a blank line) and real book
50 % headers (author and title on facing pages) for the twoside option.}
51 % \changes{v0.1}{2001/08/29}{Changed the commands slightly, gave most
52 % of them default values, and added commands for user configuration
53 % of the scene separator and ``The End''.}
54 % \changes{v0.1}{2001/08/29}{Reredefined chapter so that chapter*
55 % works in submissions, changed fancyheader calls to non-deprecated
56 % versions.}
57 % \changes{v0.1}{2001/08/29}{Added rudimentary documentation to the
58 % class file.}
59 % \changes{v0.2}{2001/09/02}{Added the magic command from ulem.sty to
60 % change boldface (\bf) to squiggly lines in submission format}
61 % \changes{v0.2}{2001/09/02}{Added quote smartening option (using
62 % quote.sty), novel option and notitle option}
63 % \changes{v0.2}{2001/09/02}{Fixed the a4paper option, I hope}
64 % \changes{v0.2}{2001/09/02}{Added the ifsubmission command to mask
65 % fancy markup (and text)}
66 % \changes{v0.2}{2001/09/02}{Added the synopsis environment for book
67 % synopses}
68 % \changes{v0.2}{2001/09/02}{Changed spacing to 1.83 and neatened the
69 % code}
70 % \changes{v0.3}{2001/09/04}{Added quote dumbing option}
71 % \changes{v0.3}{2001/09/04}{Ported sffms.cls and support files to
72 % dtx file, added more documentation}
73 % \changes{v0.3}{2001/09/04}{Switched from doublespace package to
74 % setspace}
75 % \changes{v1.0}{2001/09/10}{Improved documentation}
76 % \changes{v1.0}{2001/09/10}{Reworked submission title page spacing and
77 % added the disposable command}
78 % \changes{v1.1}{2001/09/23}{Cut back on non-submission formatting}
79 % \changes{v1.1}{2001/09/23}{Fixed spacing for ``The End''}
80 % \changes{v1.1}{2001/09/23}{Quote spacing fixed and code for sffdumb
81 % improved, thanks to Donald Arsenault and Martin Vaeth}
82 % \changes{v1.2}{2002/03/17}{Added documentation}
83 % \changes{v1.2}{2002/03/17}{Code cleanup, thanks to Daniel Richard G.}
84 % \changes{v1.2}{2002/03/17}{Added submit, nosubmit and msheading
85 % commands}
86 % \changes{v1.3}{2002/03/17}{Double underline for textsc}
87 % \changes{v1.3}{2002/03/18}{Added undocumented command pageofpages}
88 % \changes{v1.3}{2002/03/18}{Made a rough automatic word count}
89 % \changes{v1.3}{2002/03/23}{Fixed automatic word count}
90 % \changes{v1.3}{2002/03/23}{Hid some internal defs and cleaned up code}
91 % \changes{v1.3}{2002/03/23}{Documented LaTeX spacing commands}
92 % \changes{v2.0}{2003/03/13}{Removed dependencies on ifthen and geometry
93 % packages, made geometry an option}
94 % \changes{v2.0}{2003/03/13}{Added baen, daw and wotf options}
95 % \changes{v2.0}{2003/03/13}{Added troubleshooting section, a table of
96 % contents, and various other improvements to the documentation}
97 %
98 %
99 % \newcommand{\DescribeOption}[1]{\DescribeEnv{[#1]}}
100 %
101 % \begin{abstract}\noindent
102 % Documentation for |sffms|, a \LaTeX\ class for typesetting fiction
103 % manuscripts in the standard formats used in science-fiction/fantasy
104 % publishing.
105 % \end{abstract}
106 %
107 % \noindent
108 % This \LaTeX\ class was modified from |sfms.cls|, copyright Kevin Russell
109 % 2000, under the terms of the \LaTeX\ Project Public License.
110 % The file |sffms.dtx| may be redistributed and/or modified under the
111 % terms of the \LaTeX\ Project Public License, distributed from CTAN
112 % archives in the directory macros/latex/base/lppl.txt---either
113 % version 1.2 of the License, or any later version.
114 %
115 %
116 % \newif\ifmulticols
117 % \IfFileExists{multicol.sty}{\multicolstrue}{}
118 % \ifmulticols
119 % \addtocontents{toc}{%
120 % \protect\setlength{\columnsep}{3pc}%
121 % \protect\begin{multicols}{2}}
122 % \fi
123 % {\parskip 0pt
124 % \tableofcontents
125 % }
126 %
127 % \section{About {\tt sffms}}
128 %
129 % The |sffms| package produces a double-spaced manuscript in a 12-point
130 % monospaced font with one-inch margins and running headers of the form
131 % |Author/TITLE/n|, where |n| is the current page number.
132 % On the title page, the author's name and address appear in the upper
133 % left corner, the word count and an optional note that the manuscript
134 % is disposable in the upper right, and the title and author in the
135 % center of the page. For a short story, the text begins four lines
136 % below, and for a novel, on the next page. Some publisher-specific
137 % variants of the format are also supported.
138 %
139 % Other features of |sffms| include an optional single-spaced synopsis,
140 % automatic conversion of italics, boldface, and small caps to
141 % appropriately underlined text, and a rough automatic word count.
142 % Simply by including the |nonsubmission| option,
143 % the same document may be typeset in \LaTeX's usual professional
144 % way. The non-submission format can be customized without
145 % affecting the appearance of the version for submission, allowing
146 % the user to print both camera-ready copies and submission
147 % manuscripts from a single story file.
148 %
149 % The \LaTeX\ document preparation system is free and available for
150 % all operating systems. This package and all supporting packages
151 % are available from \textsc{ctan}. To obtain any recent version of
152 % |sffms|, copies of the supporting packages, sample input and output
153 % files, a list of known issues, and more information about manuscript
154 % format, see |http://mcd.freeshell.org/|. If you still have questions
155 % or suggestions after reading through this documentation, feel free to
156 % email the author at |[email protected]|.
157 %
158 % \section{Getting Started}
159 %
160 % If you are already familiar with \LaTeX, you may wish to skip
161 % this section.
162 %
163 % \subsection{Installing \LaTeX}
164 %
165 % \LaTeX\ is available for all operating systems, in a bewildering
166 % variety of implementations. For the beginner, I recommend the
167 % following popular combinations of an underlying \TeX\ engine and
168 % a nice front-end and/or text editor:
169 %
170 % For Windows, MiKTeX (|www.miktex.org|) and WinEdt (|www.winedt.com|).
171 %
172 % For MacOS X, TeXLive-teTeX and TeXShop (both available at \\
173 % |www.uoregon.edu/~koch/texshop/texshop.html|).
174 %
175 % For MacOS 9 and below, OzTeX and Alpha. (See
176 % |www.esm.psu.edu/mac-tex/| for links.)
177 %
178 % For Unix systems, emacs and \TeX\ should come pre-installed, but
179 % you might want to look into teTeX (|www.tug.org/tetex|).
180 %
181 % Some of these packages use A4 as their default paper size. See the
182 % Troubleshooting section for more details.
183 %
184 % \subsection{Installing {\tt sffms}}
185 %
186 % If you use a \TeX\ package management system to install |sffms|, you
187 % need not follow the rest of the steps in this section, but you will
188 % probably need to install the supporting packages listed below.
189 % Be sure that you get the most recent version of |sffms|. The
190 % version can be identified either by the date or the version
191 % number.
192 %
193 % The |sffms| class is distributed as two files, |sffms.dtx| and
194 % |sffms.ins|.
195 % To install the class manually, run \LaTeX\ on |sffms.ins|.
196 % You can do this either by opening |sffms.ins| in your front-end
197 % (WinEdt or TeXShop) and hitting the \LaTeX\ button,
198 % or by typing the following at the command line:
199 %\begin{verbatim}
200 %latex sffms.ins
201 %\end{verbatim}
202 % \LaTeX\ will automatically create the style files
203 % |sffms.cls|, |sffsmart.sty| and |sffdumb.sty|. At this point,
204 % you may either move the new files into the appropriate directory
205 % of your \LaTeX\ distribution, or leave them in the directory
206 % where your source files (stories) will be.
207 %
208 % The |sffms| class requires several supplemental style files which
209 % may or may not be included in your \LaTeX\ or |sffms| distribution.
210 % Try running a sample story file through \LaTeX\ (see below).
211 % If \LaTeX\ asks for any of the following files, you will need
212 % to download them and place them in the directory where you put
213 % |sffms.cls|. The files are:
214 %\begin{verbatim}
215 %fancyhdr.sty
216 %setspace.sty
217 %ulem.sty
218 %\end{verbatim}
219 % As of version 2.0 of |sffms|, the |geometry| package is no longer
220 % required. If you decide to use it, obtain |geometry.dtx| and
221 % |geometry.ins| and latex the latter, as you did with |sffms.ins|.
222 %
223 % All of the files mentioned above
224 % are available through {\sc ctan} (|www.ctan.org|).
225 %
226 %
227 % \subsection{Using {\tt sffms}}
228 %
229 % All you need to use |sffms| is a plain text file with the following
230 % contents:
231 %\begin{verbatim}
232 %\documentclass{sffms}
233 %\author{Lois McMaster Bujold}
234 %\title{Komarr}
235 %\begin{document}
236 %Your story goes here.
237 %\end{document}
238 %\end{verbatim}
239 %
240 % Call this source file |filename.tex| and latex it by typing
241 %\begin{verbatim}
242 %latex filename.tex
243 %latex filename.tex
244 %\end{verbatim}
245 % \LaTeX\ should be run twice in order to get the correct word count.
246 %
247 % Depending on your \LaTeX\ installation, this command may produce
248 % an output file in |dvi|, |ps|, or |pdf| format. If you prefer |pdf|
249 % output, you may find it more convenient to use the |pdflatex| command.
250 %
251 %
252 % \subsection{\LaTeX\ Basics}
253 %
254 % A \LaTeX\ file is essentially a text file. If you take a plain
255 % text version of your story and insert the lines mentioned in the
256 % previous section (|\documentclass|, {\em etc.}), it will be almost
257 % ready for \LaTeX. Just keep the following requirements in mind:
258 %
259 % Paragraphs should be separated by a blank line.
260 %
261 % Use |-| for a hyphen, |--| for an en-dash (for ranges, like
262 % 18--65), and |---| for an em-dash---the one used as punctuation.
263 %
264 % Normal \LaTeX\ ``smart
265 % quotes'' are produced using a pair of accents (usually found
266 % under the $\sim$ key) and a pair of
267 % apostrophes, like so: |``smart quotes''|. A good \LaTeX\ editor
268 % ({\it e.g.}, emacs) will insert smart quotes automatically when
269 % you strike the dumb quote (|"|) key. You may also use dumb
270 % quotes with |sffms|---see the section on handling quotation
271 % marks, below. Note that |```| becomes ``\thinspace`. To produce
272 % `\thinspace{``} instead, use braces, like so: |`{``}|. Likewise,
273 % use |'{''}| if |'''| fails to do the job.
274 %
275 % Certain characters are reserved by \LaTeX\ for special purposes:
276 %\begin{verbatim}
277 %# $ % & ~ _ ^ \ { }
278 %\end{verbatim}
279 % To use a reserved character in a story, you must put a backslash
280 % in front of it (|\$|, |\%|, {\em etc.}), except for |\\|, |\~|,
281 % and |\^|, which have their own special meanings.
282 % (The first is used to force a line break and the latter two
283 % create accent marks over the following character.)
284 % The command |$\backslash$| produces the backslash itself and
285 % |$\sim$| the tilde alone.
286 %
287 % The percent-sign is particularly dangerous because it's the
288 % comment character in \LaTeX. Anything between an unescaped |%|
289 % and the end of the line will be silently ignored by \LaTeX\
290 % when it processes your file.
291 %
292 %\subsection{\LaTeX\ Tricks}
293 %
294 % Depending on your \LaTeX\ installation, you may be able to produce some
295 % common accent marks thus:
296 %\begin{center}
297 % \'{a}~~|\'{a}| \hfill \`{e}~~|\`{e}| \hfill \"{\i}~~|\"{\i}| \hfill
298 % \~{o}~~|\~{o}| \hfill \^{u}~~|\^{u}| \hfill \c{c}~~|\c{c}|
299 %\end{center}
300 %If you want something a little more alien, try some of the following:
301 %\begin{verbatim}
302 %\.{h} \^{m} \u{n} \v{q} \H{r} \d{v} \b{x}
303 %\i \j \ae \OE \l \o \ss \S ?` !` \pounds
304 %\end{verbatim}
305 % Many more symbols are available in \LaTeX's math mode, but keep in
306 % mind that such gimmicks are likely to annoy your editor.
307 %
308 % If you need finer control of your text layout, you can use the
309 % |\noindent| command before a paragraph to keep it from
310 % being indented. You can use the |\\| symbol to force a line
311 % break without starting a new paragraph. (These two methods will have
312 % the same effect for submissions, but not in |nonsubmission| mode.)
313 %
314 % \LaTeX\ ignores all extra spaces between words and sentences, then
315 % inserts (approximately) two spaces between sentences. If you
316 % prefer one space after all punctuation, include the command
317 %\begin{verbatim}
318 %\frenchspacing
319 %\end{verbatim}
320 % at the beginning of your document. To force a single space in
321 % those rare cases where \LaTeX\ chooses the wrong spacing, use
322 % |\ | (a backslash followed by a space) or |~|.
323 %\begin{verbatim}
324 %``Put only one space after a quote!''\ she demanded.
325 %
326 %``Of course, Dr.~Jones!''
327 %\end{verbatim}
328 % The |~| also prevents a linebreak from occurring between the two
329 % words. Use it with caution.
330 %
331 % All \LaTeX\ commands begin with a backslash, as in
332 % |\documentclass{sffms}| or |\frenchspacing|. \LaTeX\ environments
333 % begin with a |\begin| command and end with an |\end| command.
334 % Two \LaTeX\ environments that may be of use are
335 % |verse| and |quotation|:
336 %\begin{verbatim}
337 %\begin{verse}
338 %First line of your verse,\\
339 %Second line\\
340 %Third line
341 %
342 %Beginning of a new stanza\\
343 %Etc.
344 %\end{verse}
345 %\end{verbatim}
346 %
347 %\begin{verbatim}
348 %\begin{quotation}
349 %Put normal paragraphs of text here, separated by blank lines as usual.
350 %They will be indented from the margins, and each paragraph will
351 %be indented.
352 %\end{quotation}
353 %\end{verbatim}
354 % Long quotes or verse can be single-spaced, but by default they are
355 % not. See the section
356 % on environments for details. Underlining and boldface are also
357 % discussed in a later section.
358 %
359 %
360 % \section{Declaration of Options}
361 %
362 % The |sffms| class has several {\em options} which change the
363 % appearance of the output. To use an option, enclose it in
364 % brackets in the |documentclass| declaration in the first line
365 % of your story file. Separate multiple options with commas.
366 % For example, to use the |novel| and |baen| options, the first line
367 % of the file should read:
368 %\begin{verbatim}
369 %\documentclass[novel,baen]{sffms}
370 %\end{verbatim}
371 %
372 % \subsection{The Submission Options}
373 %
374 %\DescribeOption{submission}
375 % The |submission| option is now the default and need not be
376 % declared. This option causes the document to be typeset in
377 % manuscript format, with double spacing, one-inch margins,
378 % and a fixed-width font. All |sffms|
379 % options except |nonsubmission| may be used with the submission
380 % option, though |submission| plus |notitle| will make the output
381 % format nonstandard. (Editors want titles.)
382 %
383 %\DescribeOption{novel}
384 % There isn't much difference between a novel and a short story in
385 % sf/f manuscripts. The short story begins on the title page,
386 % while the novel begins on a fresh page. A novel may also have a
387 % synopsis.
388 % Use the |novel| option for a novel. If the |novel| option is
389 % {\em not\/} used, the text will be typeset as a short story.
390 %
391 % The |sffms| class now includes publisher-specific options for
392 % certain publishers whose
393 % requirements differ slightly from the default |submission| style.
394 % In all other respects, the story is treated as a normal submission.
395 % Publishers' guidelines may change, so check that these options do
396 % what you need them to do before using them.
397 %
398 %\DescribeOption{baen}
399 % The |baen| option uses $1\,\frac{1}{2}$|"| margins rather than 1|"|.
400 % Baen Books' requirements are available on-line (|www.baen.com/FAQS.htm|).
401 %\begin{verbatim}
402 %\documentclass[baen]{sffms}
403 %\end{verbatim}
404 %
405 %\DescribeOption{daw}
406 % The |daw| option typesets the address and wordcount on the
407 % right-hand side of the first page rather than splitting it across
408 % the page. The DAW Books manuscript requirements are available
409 % on-line\\
410 % (|www.penguinputnam.com/static/packages/us/about/dawsub.htm|).
411 %\begin{verbatim}
412 %\documentclass[daw]{sffms}
413 %\end{verbatim}
414 %
415 %\DescribeOption{wotf}
416 % The |wotf| option uses a full cover page (like that of the novel
417 % option) and alters the running header to omit the author's surname,
418 % as required by the rules of the Writers of the Future contest
419 % (|www.writersofthefuture.com|).
420 % Also, the full title is used in the running header, and page
421 % numbering begins with the first story page, rather than
422 % counting the title page.
423 %\begin{verbatim}
424 %\documentclass[wotf]{sffms}
425 %\end{verbatim}
426 %
427 % To my knowledge, the default submission format does not violate
428 % the guidelines of Tor Books (|www.tor.com/torfaq.html|),\\
429 % Analog (|www.analogsf.com/information/submissions.shtml|),\\
430 % Asimov's (|www.asimovs.com/info/guidelines.shtml|),\\
431 % Fantasy \& Science Fiction (|www.sfsite.com/fsf/glines.htm|),
432 % or the Star Trek Strange New Worlds contest.
433 %
434 % Please be sure to include all required contact information within
435 % the |address| command, described below.
436 %
437 %
438 % \subsection{Options for Quotation Marks}
439 %
440 % The |sffms| class provides two options for handling ``legacy''
441 % quotes, be they dumb quotes in a plain text file you want
442 % smartened up for a good copy of your latest novel, or \LaTeX\
443 % quotes you want to dumb down to give your manuscript that
444 % genuine Courier 12-point typewriter feel.
445 %
446 % Please note that neither of these options will handle
447 % non-{\sc ascii} ``smart'' quotation marks in your source file.
448 % All non-{\sc ascii} characters must be eliminated by saving
449 % the file as plain text. Note that the changes explained below
450 % appear in the output only---the source file is never
451 % altered.
452 %
453 %\DescribeOption{smart}
454 % The |smart| option turns pairs of normal {\sc ascii}
455 % quotation marks (|"|dumb quotes|"|) into \LaTeX\ quotation
456 % marks (|``|smart quotes|''|), so that the output file
457 % will show true ``smart quotes.'' This option also correctly handles
458 % quotations continued between paragraphs.
459 %
460 %\DescribeOption{dumb}
461 % The |dumb| option suppresses \LaTeX\ |``|smart quotes,|''|
462 % producing dumb, typewriter-style quotes in the output file
463 % rather than the slanted ones that are the default in
464 % submission mode.
465 % The |dumb| option is not useful with the |nonsubmission|
466 % option because only monospaced fonts like Courier include
467 % a true dumb quotation mark (|"|) at all.
468 % Other fonts may substitute a curly close-quote ('') instead,
469 % which looks ''dumber than dumb.''
470 %
471 % These options are not particularly robust, so they may cause more
472 % problems than they solve. {\em Caveat emptor}.
473 % They can handle mixed quotation mark styles (\LaTeX\ smart with
474 % {\sc ascii} dumb) if the two sorts of marks are balanced---for
475 % example, if some chapters use {\sc ascii} quotes and others
476 % \LaTeX\ ones, or even if some sentences are smart and others
477 % dumb.
478 %
479 % If these options do not work for you, you can always
480 % change the quotation marks in your source file with a good text
481 % editor like emacs.
482 %
483 %
484 % \subsection{Non-submission Options}
485 %
486 %\DescribeOption{nonsubmission}
487 % To force a document to be typeset as a normal book or article
488 % (that is, without double-spacing or the fixed-width font), use the
489 % |nonsubmission| option in your |documentclass| declaration:
490 %\begin{verbatim}
491 %\documentclass[nonsubmission]{sffms}
492 %\end{verbatim}
493 %
494 %\DescribeOption{notitle}
495 % When the |nonsubmission| option is chosen, the |sffms|
496 % class creates a default title page. The |notitle| option will
497 % remove it, allowing the user to specify his own \LaTeX\ layout;
498 % |notitle| is also useful for saving paper.
499 %
500 % Because |sffms| is based on the standard \LaTeX\ report class, any
501 % other \LaTeX\ report class options may be used for non-submissions,
502 % including font size
503 % options (|10pt|, |12pt|, {\em etc.}), paper size and other useful
504 % typesetting options (|twoside|, |twocolumn|, {\em etc.}). Using
505 % report-class options together with a |submission| option may
506 % generate unexpected results.
507 %
508 % \subsection{Other Options}
509 %
510 %\DescribeOption{courier}
511 % The |courier| option switches to a 12-point, 10-pitch Courier font
512 % that may look better than \LaTeX's default monospaced font,
513 % depending on your local \LaTeX\ setup. Try this option if you want
514 % a fatter font than the default or if your |pdf| files are looking
515 % grainy.
516 %
517 %\DescribeOption{geometry}
518 % The |geometry| option forces |sffms| to use the |geometry| package
519 % for page layout. This option is useful for getting around
520 % page size problems. See the Troubleshooting section for
521 % details.
522 %
523 %\DescribeOption{a4paper}
524 %\DescribeOption{letterpaper}
525 % If you use geometry with the intent of fixing your papersize,
526 % you should declare the desired paper size explicitly.
527 % A4 and letter are the most common choices, but other
528 % paper sizes may also be used. See the documentation of
529 % the geometry package for the full list.
530 %
531 %
532 % \section{Commands}
533 %
534 % \subsection{Title}
535 %
536 %
537 %\DescribeMacro\title
538 % Every story should have a title. You must specify the title
539 % using the \LaTeX\ |title| command thus:
540 %\begin{verbatim}
541 %\title{The Hobbit: or There and Back Again}
542 %\end{verbatim}
543 %
544 %\DescribeMacro\runningtitle
545 % In |submission| format, a short form of
546 % the title is placed in the page header at the top right of
547 % each page.
548 % If your title is long, specify the desired short form thus:
549 %\begin{verbatim}
550 %\runningtitle{The Hobbit}
551 %\end{verbatim}
552 % If you fail to provide a |runningtitle|, your |title| will be
553 % used instead, no matter how long it is.
554 %
555 % \subsection{Author}
556 %
557 %\DescribeMacro\author
558 % Every story must also have an author. The name included in the
559 % \LaTeX\ |author| command is used in the bylines on the title
560 % page and synopsis page.
561 % If you use a pseudonym, you may wish to put it here.
562 %\begin{verbatim}
563 %\author{Lois McMaster Bujold}
564 %\end{verbatim}
565 %
566 %\DescribeMacro\authorname
567 % A separate command, |authorname|, is provided for use with
568 % your mailing address. It might be wise to put your real name
569 % here. If you omit the |authorname| command, the value of
570 % |author| will be used with your mailing address.
571 %\begin{verbatim}
572 %\authorname{Lois Bujold}
573 %\end{verbatim}
574 %
575 %\DescribeMacro\surname
576 % Like |runningtitle|, |surname| is used in page headers. Whose
577 % surname goes in |surname| is up to you.
578 %\begin{verbatim}
579 %\surname{Bujold}
580 %\end{verbatim}
581 % If you omit |surname|, the full value of |author| will be used.
582 %
583 % \subsection{Other Information}
584 %
585 %\DescribeMacro\address
586 % Your mailing address for the title page is specified with
587 % the |address| command. Separate lines with the \LaTeX\
588 % linebreak symbol |\\| thus:
589 %\begin{verbatim}
590 %\address{One Vor Way\\
591 % Vor. Surleau\\
592 % VKD 28945}
593 %\end{verbatim}
594 % Other requested contact information (such as a phone number
595 % or email address) should be included here.
596 %
597 %\DescribeMacro\wordcount
598 % Your word count should also be included on the title page.
599 % An approximate word count based on the number of pages will
600 % appear automatically. However, the automatic word count is
601 % not rounded off (much) and ought to be replaced by your own
602 % rounded-up opinion of the word count. The |\wordcount| command
603 % is used to set the value manually thus:
604 %\begin{verbatim}
605 %\wordcount{85,000}
606 %\end{verbatim}
607 % The automatic word count is generated by multiplying the page
608 % count (not including a novel synopsis) by either 250 or 295,
609 % depending on the font pitch and margin size. The latter
610 % figure was obtained by taking a typical page of one of the
611 % author's stories, finding the average number of characters
612 % per line (71), dividing by six (a ``word''), multiplying by
613 % the number of lines on a full page (25), and rounding off.
614 % You may wish to repeat this process or a similar one for your
615 % own stories, since a4 paper and partial pages (among other
616 % things) were not taken into account.
617 %
618 %\DescribeMacro\disposable
619 % The |disposable| command causes the words ``Disposable Copy''
620 % to be printed under the word count on the title page of
621 % submissions.
622 %
623 % \subsection{Sectioning Commands}
624 %
625 %\DescribeMacro\newscene
626 % For short stories, the only breaks should be scene breaks.
627 % Place the |newscene| command wherever you want a scene break.
628 %\begin{verbatim}
629 %...the last few words of the previous scene.
630 %
631 %\newscene
632 %
633 %Time to start a new scene...
634 %\end{verbatim}
635 % This command inserts the proper scene break character, a
636 % centered hash mark (|#|), in
637 % submissions, and a blank line in non-submissions.
638 %
639 %\DescribeMacro\sceneseparator
640 % If you would prefer to use a different scene separator, such
641 % as |*****|, the |sceneseparator| command will change it.
642 %\begin{verbatim}
643 %\sceneseparator{$\star\star\star\star\star$}
644 %\end{verbatim}
645 % Beware of \LaTeX\ special characters when using this command.
646 %
647 %\DescribeMacro\chapter
648 % For a novel, you can use both chapters and scenebreaks. The
649 % \LaTeX\ chapter commands have been redefined in |sffms| to
650 % fit the |submission| format. Begin a new chapter thus:
651 %\begin{verbatim}
652 %\chapter{Miles High}
653 %\end{verbatim}
654 %\DescribeMacro{\chapter*}
655 % The \LaTeX\ |\chapter*| command also works in submissions.
656 % It creates an unnumbered chapter, such as a preface or
657 % appendix.
658 %\begin{verbatim}
659 %\chapter*{Preface}
660 %\end{verbatim}
661 %
662 %\DescribeMacro\thirty
663 % Last, but not least, comes the end. The default
664 % end-of-story symbol, five hash marks (|# # # # #|), is inserted
665 % automatically at the end of your story. To change it, use the
666 % |thirty| command.
667 %\begin{verbatim}
668 %\thirty{The End}
669 %\end{verbatim}
670 %
671 % \subsection{Italics, Boldface and Small Caps}
672 %
673 % In submission mode, italicized text is automatically converted
674 % to underlined text. Boldface is replaced
675 % by wavy underlining and small caps by double underlining.
676 %
677 %\DescribeMacro\em
678 % The |\em| command may be used for single italicized words; it
679 % goes inside the braces with the word, thus:
680 %\begin{verbatim}
681 %I can't believe that {\em you}, of all people...
682 %\end{verbatim}
683 % This produces underlining by default and italics in
684 % non-submissions.
685 %\DescribeMacro\emph
686 % To underline (italicize) anything from a word to a paragraph,
687 % use the |\emph| command. With |\emph|, the curly braces come
688 % after the command.
689 %\begin{verbatim}
690 %\emph{I can't believe that they, of all people...}
691 %\end{verbatim}
692 %\DescribeMacro\thought
693 % The |\thought| command works exactly like |\emph|, but may
694 % be useful to the author for distinguishing between normal
695 % italics and italicized thoughts within the source file.
696 % To italicize more than one paragraph, use one |\emph|
697 % or |\thought| per paragraph.
698 %
699 %\DescribeMacro\bfseries
700 %\DescribeMacro\textbf
701 % The |\bfseries| font declaration and the |\textbf| font command
702 % will produce boldface in
703 % non-submissions and wavy underlines in |submission| mode. The
704 % font declaration goes inside the curly braces and the font
705 % command outside, thus:
706 %\begin{verbatim}
707 %I can't believe that {\bfseries you}, of \textbf{all people}...
708 %\end{verbatim}
709 %
710 %\DescribeMacro\scshape
711 %\DescribeMacro\textsc
712 % The |\scshape| font declaration and the |\textsc| font command
713 % will produce small caps in
714 % |nonsubmission| mode and double-underlined text in submissions.
715 % They work exactly like the corresponding boldface commands:
716 %\begin{verbatim}
717 %I can't believe that {\scshape you}, of \textsc{all people}...
718 %\end{verbatim}
719 %
720 % Since they can be used for individual words as well as phrases
721 % and paragraphs, you may wish to use |\emph{}|, |\textbf{}|,
722 % and |\textsc{}| in all cases to avoid confusion.
723 %
724 % \subsection{Other Commands}
725 %
726 %\DescribeMacro\ifsubmission
727 % The |ifsubmission| command is used to hide latex code or text.
728 % The first argument is evaluated for submissions, and ignored
729 % otherwise, and vice versa for the second. It can be used in
730 % various ways.
731 %\begin{verbatim}
732 %\ifsubmission{}{Some comments to myself...}
733 %\end{verbatim}
734 %\begin{verbatim}
735 %\ifsubmission{\thirty{-30-}}{
736 % \setlength{\textheight}{8.5in}
737 % \setlength{\topmargin}{0in}
738 %}
739 %\end{verbatim}
740 %
741 %\DescribeMacro\submit
742 % Two commands are provided as a convenient shorthand for the
743 % |\ifsubmission| command. They take one argument each.
744 % Text or commands inside a |\submit| command will be used
745 % only for submissions,
746 %\DescribeMacro\nosubmit
747 % and that in a |\nosubmit| will be used only for
748 % non-submissions. For example, the following command is
749 % equivalent to the first |\ifsubmission| command above.
750 %\begin{verbatim}
751 %\nosubmit{Some comments to myself...}
752 %\end{verbatim}
753 %
754 %\DescribeMacro\msheading
755 % If for some reason you wish to deviate from the standard running
756 % page headings, you can use the |\msheading| command to change
757 % them. To remove headings entirely, use the command:
758 %\begin{verbatim}
759 %\msheading{}
760 %\end{verbatim}
761 % To keep just the page number, use:
762 %\begin{verbatim}
763 %\msheading{\thepage}
764 %\end{verbatim}
765 % To add more space between the default heading parts, use:
766 %\begin{verbatim}
767 %\msheading{\getsurname\ /\ \getrunningtitle\ /\ \thepage}
768 %\end{verbatim}
769 % For page numbers of the form ``Page 3 of 135,'' use:
770 %\begin{verbatim}
771 %\msheading{\pageofpages}
772 %\end{verbatim}
773 % (Check the code for |\pageofpages| to see how it was done.)
774 % Reckless use of the |\msheading| command may cause \LaTeX\
775 % errors.
776 %
777 % Any other \LaTeX\ commands may be used for non-submissions.
778 % Using them for submissions may generate unexpected results.
779 %
780 %
781 % \section{Environments}
782 %
783 %\DescribeEnv{synopsis}
784 % The only new \LaTeX\ environment in |sffms| is |synopsis|,
785 % intended for use with novels.
786 % In |submission| mode, the synopsis is typeset
787 % single-spaced with roman numerals for page numbers to distinguish
788 % it from the rest of the novel.
789 %\begin{verbatim}
790 %\begin{synopsis}
791 %Summarize your novel here.
792 %\end{synopsis}
793 %\end{verbatim}
794 % The synopsis can be placed anywhere after the |\begin{document}|
795 % command. The synopsis environment can
796 % also be used without the |novel| option.
797 %
798 %\DescribeEnv{singlespace}
799 % The |singlespace| and |doublespace| environments are inherited
800 % from the |setspace| package which is provides the doublespacing
801 % for |sffms|. The following will single-space a poem, for example:
802 %\begin{verbatim}
803 %\begin{singlespace}
804 %\begin{verse}
805 %Oh, what a bore,\\
806 %To be a Vor.
807 %\end{verse}
808 %\end{singlespace}
809 %\end{verbatim}
810 % (See the \LaTeX\ Tricks section for an explanation of the |verse|
811 % and |quotation| environments.)
812 % You should not need the |doublespace| environment, but it works the
813 % same way.
814 %
815 %
816 % \section{Troubleshooting}
817 %
818 % Problems with |sffms| are usually caused by typos in the source
819 % file or by a local \LaTeX\ misconfiguration. This section
820 % covers the most common issues.
821 %
822 % \subsection{Processing Errors}
823 %
824 % If \LaTeX\ complains that it cannot find one or more of |sffms|,
825 % |fancyhdr|, |setspace|, |ulem|, or |geometry|, they may not
826 % have been installed in the correct directory. If you cannot find
827 % the correct spot, or if you are working on a public server
828 % where you do not have permission to install new \LaTeX\ packages,
829 % you can always put all required files in the folder where the
830 % the story file itself is located. \LaTeX\ will find them
831 % automatically.
832 %
833 % If, in particular, \LaTeX\ cannot find |sffms.cls|,
834 % |sffdumb.sty|, |sffsmart.sty|, or
835 % |geometry.sty|, these files may not have been extracted from
836 % |sffms.dtx| or |geometry.dtx|. To create the appropriate files,
837 % run latex on |sffms.ins| or |geometry.ins|, respectively,
838 % as described in the section on installing |sffms|.
839 %
840 % The first time you run latex on a new story, you may see a
841 % warning that `sffmswc' is undefined and a message telling you
842 % to latex the file a second time. This is normal latex behavior.
843 % You should latex the file a second time.
844 %
845 % If \LaTeX\ gives you underfull errors, you can ignore them.
846 % If you get overfull errors, you can ignore the small ones
847 % (under 5 or 10 points), but for large ones, you should locate
848 % the problem line in the source file (by line number) or in the
849 % output (by looking for lines that poke out into the margin or
850 % end suddenly in with black box). If the overflow is large
851 % you may want to split the problematic line or a word manually
852 % using |\\|.
853 % Normally, \LaTeX\ hyphenates words on its own, but hyphenation
854 % is suppressed in submission mode. You should wait until your
855 % story is in a final form before twiddling with overfull errors.
856 %
857 % Font errors can generally be ignored. If you do not like the
858 % appearance of the default font, see the section below on appearance
859 % issues.
860 %
861 % In cases where \LaTeX\ halts with an error, read the error
862 % message carefully and then type |x| at the question-mark prompt
863 % to exit.
864 % Return to your story file and locate the section that caused
865 % the problem, using either the wording or the line number
866 % shown in the error message to help you track it down.
867 % Check that you have closed all curly braces and have not
868 % accidentally used a special character like |$| or |&|, or
869 % misspelled a command. See the \LaTeX\ Basics section for
870 % a full list of reserved characters.
871 %
872 % If you get a cryptic error like ``There's no line here to end''
873 % while using the |daw| option,
874 % be sure you've included at least a |title|, |author|, and
875 % |address|.
876 %
877 % \subsection{Margin Problems}
878 %
879 % Margin problems are almost always caused by an incorrect default
880 % paper size setting within your \LaTeX\ installation. Several
881 % popular \LaTeX\ installations come with |a4| set as the default
882 % paper size. Before you blame \LaTeX, however, be sure you
883 % understand what |sffms| is supposed to do.
884 %
885 % For a submission, the bottom margin should be about the same
886 % as the side margins---one inch. The running page header with
887 % your name, title and the page number pokes up into the top
888 % margin, making it appear to be less than an inch on the right
889 % side. Everywhere else, however, it should be an inch, or an
890 % inch and a half if you are using the |baen| option.
891 %
892 % If you still think your top margin is too small and the bottom
893 % too big, the problem is almost certainly due to your default
894 % paper size setting. You can use the |geometry| option to
895 % attempt to force the correct paper size, thus:
896 %\begin{verbatim}
897 %\documentclass[geometry,letterpaper]{sffms}
898 %\end{verbatim}
899 %
900 % You can add papersize flags to certain commands, such as |dvips|,
901 % to work around these problems, but the best approach
902 % is to fix your default paper size once and for all, especially if
903 % you intend to use the |nonsubmission| option
904 % or if the geometry option fails.
905 %
906 % If you are using MiKTeX or a version of teTeX besides the one
907 % installed with TeXShop, you may need to change your
908 % default paper size to letter paper.
909 % For teTeX, you should be able to adjust this setting
910 % either during the installation process or afterwards
911 % with the |texconfig| command:
912 %\begin{verbatim}
913 %texconfig dvips paper letter
914 %texconfig xdvi us
915 %\end{verbatim}
916 % You may also need to edit the \\
917 % |/usr/local/teTeX/share/texmf/pdftex/config/pdftex.cfg|
918 % file as described below for MiKTeX. The changes are the same.
919 %
920 % You can fix pdf output in MiKTeX by editing the file \\
921 % |\texmf\pdftex\config\pdftex.cfg| in your
922 % text editor, replacing the lines
923 %\begin{verbatim}
924 %page_width 210 true mm
925 %page_height 297 true mm
926 %\end{verbatim}
927 % with the following:
928 %\begin{verbatim}
929 %page_width 8.5 true in
930 %page_height 11 true in
931 %\end{verbatim}
932 % You can fix postscript output by editing the file \\
933 % |\texmf\dvips\config\config.ps|, changing
934 %\begin{verbatim}
935 %@ A4size 210mm 297mm
936 %@+ %%PaperSize: A4
937 %
938 %@ letterSize 8.5in 11in
939 %\end{verbatim}
940 %to read only:
941 %\begin{verbatim}
942 %@ letterSize 8.5in 11in
943 %@+ %%PaperSize: Letter
944 %\end{verbatim}
945 % You may still see a problem if you view dvi files in Yap.
946 % In that case, open View $\vert$ Options... $\vert$ Display in the
947 % Yap menu and change the paper size setting to letter paper.
948 % Another possible, but unlikely, culprit is
949 % |\texmf\dvipdfm\config\config|, in which you may wish to change
950 % |p a4| to |p letter|.
951 %
952 %
953 %
954 % \subsection{Other Appearance Issues}
955 %
956 % If your PDF output looks grainy, try using the |courier| option.
957 %
958 % If you get a wordcount of |??|, you probably forgot to latex
959 % your file twice. Latex the file a second time.
960 %
961 % Problems with underlining for italics and boldface have a
962 % couple of likely causes.
963 % The (required) |ulem.sty| package does not officially
964 % support underlining across paragraph breaks, so for
965 % long stretches of underlined text, you should use a separate
966 % font command for each paragraph. You should use the |\emph|
967 % |\textbf| or |\textsc| font commands for multiple words, rather
968 % than the |\em|, |\bfseries| or |\scshape| font declarations.
969 % Also, other \LaTeX\ font commands which produce boldface,
970 % italics or slanted text, such as |\bf|, |\it|, or |\slshape|,
971 % are not supported by |sffms| and will not be converted
972 % properly to underlined text.
973 %
974 %
975 % \section{Credits}
976 %
977 % Many thanks to Kevin Russell for writing |sfms.cls|, which
978 % was itself inspired by code posted by Michael Grant
979 % to {\tt rec.arts.sf.composition} in July 2000.
980 %
981 % The code for |sffsmart.sty| was adapted from |quote.sty| by
982 % Hunter Goatley, available from {\sc ctan}.
983 %
984 % The code for |sffdumb.sty| was adapted from code posted to
985 % |comp.text.tex| by Donald Arseneau and improved by advice from
986 % the same source.
987 %
988 % Manuscript-style underlining is provided by |ulem.sty| by
989 % Donald Arseneau. Double-spacing is provided by |setspace.sty|
990 % by (at least) Geoffrey Tobin and Erica Harris. Running
991 % headers are provided by |fancyhdr.sty| by Piet van Oostrum.
992 % The geometry option loads |geometry.sty| by Hideo Umeki.
993 %
994 % Posts to |comp.text.tex| and |rec.arts.sf.composition|,
995 % and email from users, notably Daniel Richard G., aided the
996 % development of |sffms|. Any remaining errors are my own.
997 %
998 % \StopEventually{%
999 % \ifmulticols
1000 % \addtocontents{toc}{\protect\end{multicols}}
1001 % \fi
1002 % }
1003 %
1004 % \begin{macrocode}
1005 %<*sffms>
1006
1007 \newcounter{wordcounter}
1008 \newcount\wordc
1009 \newif\ifsffms@submit
1010 \newif\ifsffms@novel
1011 \newif\ifsffms@smart
1012 \newif\ifsffms@dumb
1013 \newif\ifsffms@notitle
1014 \newif\ifsffms@courier
1015 \newif\ifsffms@baen
1016 \newif\ifsffms@daw
1017 \newif\ifsffms@wotf
1018 \newif\ifsffms@runningtitle
1019 \newif\ifsffms@surname
1020 \newif\ifsffms@afour
1021 \newif\ifsffms@geometry
1022 \sffms@submittrue
1023
1024 \sfcode`\" = 0
1025
1026 \def\word@count{\ref{sffmswc}}
1027 \def\author@name{\@author}
1028 \def\author@address{}
1029 \def\sur@name{}
1030 \def\running@title{}
1031 \def\scenesepstring{\#}
1032 \def\thirtystring{\# \# \# \# \#}
1033 \def\disposablestring{}
1034 \def\pageofpages{Page {\thepage} of \pageref{sffmswc}}
1035 \def\msheadstring{\getsurname\hspace{.5ex}/\hspace{.5ex}\getrunningtitle\hspace{.5ex}/\hspace{.5ex}\thepage}
1036
1037 \DeclareOption{courier}{%
1038 \sffms@couriertrue%
1039 \AtBeginDocument{
1040 \fontfamily{pcr}\selectfont
1041 \renewcommand{\ttdefault}{pcr}
1042 \renewcommand{\bfdefault}{pcr}
1043 \renewcommand{\itdefault}{pcr}
1044 \renewcommand{\sldefault}{pcr}
1045 \renewcommand{\scdefault}{pcr}
1046 \renewcommand{\updefault}{pcr}
1047 }
1048 }
1049
1050 \DeclareOption{nonsubmission}{\sffms@submitfalse}
1051 \DeclareOption{submission}{\sffms@submittrue}%obsolete
1052 \DeclareOption{novel}{\sffms@noveltrue}
1053
1054 \DeclareOption{smart}{%
1055 \sffms@smarttrue%
1056 \AtBeginDocument{\begindoublequotes}
1057 \AtEndDocument{\enddoublequotes}
1058 }
1059
1060 \DeclareOption{dumb}{\sffms@dumbtrue}
1061 \DeclareOption{notitle}{\sffms@notitletrue}
1062
1063 \DeclareOption{baen}{\sffms@baentrue}
1064 \DeclareOption{daw}{\sffms@dawtrue}
1065 \DeclareOption{wotf}{\sffms@wotftrue}
1066
1067 \DeclareOption{geometry}{\sffms@geometrytrue}
1068
1069 \DeclareOption{a4paper}{
1070 \sffms@afourtrue%
1071 \PassOptionsToClass{\CurrentOption}{geometry}
1072 \PassOptionsToClass{\CurrentOption}{report}}
1073
1074 \DeclareOption{letterpaper}{
1075 \sffms@afourfalse%
1076 \PassOptionsToClass{\CurrentOption}{geometry}
1077 \PassOptionsToClass{\CurrentOption}{report}}
1078
1079
1080 \DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
1081 \ProcessOptions
1082
1083
1084
1085 \ifsffms@submit%
1086 \LoadClass[12pt]{report}
1087 \RequirePackage[T1]{fontenc}
1088 \RequirePackage{fancyhdr}
1089 \RequirePackage{ulem}
1090 \RequirePackage{setspace}\setstretch{1.83}
1091 \ifsffms@geometry
1092 \ifsffms@baen \RequirePackage[hmargin=1.5in,bmargin=1.5in,tmargin=1.5in,headheight=.38in,headsep=.12in,nofoot]{geometry}%
1093 \else \RequirePackage[hmargin=1in,bmargin=1in,tmargin=1in,headheight=.88in,headsep=.12in,nofoot]{geometry}%
1094 \fi%endbaenif
1095 \fi%endgeometryif
1096 \else\LoadClass{report}%
1097 \RequirePackage{setspace} \fi
1098
1099 \ifsffms@smart \RequirePackage{sffsmart} \fi
1100 \ifsffms@dumb \RequirePackage{sffdumb} \fi
1101
1102 \ifsffms@submit%
1103 \ifsffms@geometry% then margins are all set so do nothing
1104 \sffms@geometrytrue
1105 \else% have to set margins manually from paperdim
1106 \setlength\headheight{.38in}
1107 \setlength\headsep{.12in}
1108 \setlength\textwidth{\paperwidth}
1109 \newlength{\sffms@margin}
1110 \setlength{\sffms@margin}{0in}
1111 \ifsffms@baen \addtolength{\sffms@margin}{.5in} \fi
1112 \setlength\textwidth{\paperwidth}
1113 \addtolength\textwidth{-2in}
1114 \addtolength\textwidth{-2\sffms@margin}
1115 \setlength\oddsidemargin{\sffms@margin}
1116 \setlength\textheight{\paperheight}
1117 \addtolength\textheight{-2in}
1118 \addtolength\textheight{-2\sffms@margin}
1119 \setlength\topmargin{\sffms@margin}
1120 \addtolength\topmargin{-.5in}
1121 \fi%
1122 \fi%
1123
1124
1125 \newcommand{\authorname}[1]{\def\author@name{#1}}
1126 \newcommand{\address}[1]{\def\author@address{#1}}
1127 \newcommand{\wordcount}[1]{\def\word@count{#1}}
1128 \newcommand{\surname}[1]{\def\sur@name{#1} \sffms@surnametrue}
1129 \newcommand{\runningtitle}[1]{\def\running@title{#1} \sffms@runningtitletrue}
1130 \newcommand{\sceneseparator}[1]{\def\scenesepstring{#1}}
1131 \newcommand{\thirty}[1]{\def\thirtystring{#1}}
1132 \newcommand{\disposable}{\def\disposablestring{Disposable~Copy}}
1133 \ifsffms@wotf%
1134 \def\msheadstring{\MakeUppercase{\@title}\hspace{.5ex}/\hspace{.5ex}\thepage} \fi%
1135 \newcommand{\msheading}[1]{\def\msheadstring{#1}}
1136
1137 \newcommand{\penname}[1]{} % obsolete
1138 \newcommand{\getpenname}{\@author} % obsolete
1139
1140 \newcommand{\getrunningtitle}{\ifsffms@runningtitle%
1141 \MakeUppercase{\running@title}%
1142 \else \MakeUppercase{\@title}%
1143 \fi}
1144
1145 \newcommand{\getsurname}{\ifsffms@surname%
1146 \sur@name \else \@author \fi}
1147
1148 \ifsffms@submit%
1149 \newcommand{\newscene}{\centerline {\scenesepstring}}
1150 \newcommand{\ifsubmission}[2]{#1}%
1151 \else \newcommand{\newscene}{\vspace{1\baselineskip}}
1152 \newcommand{\ifsubmission}[2]{#2} \fi
1153
1154 \newcommand{\submit}[1]{\ifsubmission{#1}{}}
1155 \newcommand{\nosubmit}[1]{\ifsubmission{}{#1}}
1156
1157 \newcommand{\scenebreak}{\newscene}
1158
1159 \newcommand{\thought}[1]{\emph{#1}}
1160
1161
1162 \ifsffms@submit
1163 \AtBeginDocument{
1164 \ttfamily
1165 \useunder{\uwave}{\bfseries}{\textbf}%ulem command for boldface
1166 \useunder{\uuline}{\scshape}{\textsc}%ulem command for smallcaps
1167 \renewcommand\chapter{\if@openright\clearpage\else\cleardoublepage\fi
1168 \secdef\@chapter\@schapter}
1169 \def\@makechapterhead#1{\vspace*{4\baselineskip}
1170 \begin{center}\@chapapp\space\thechapter\\ #1 \end{center}
1171 \vspace*{1\baselineskip}}
1172 \def\@schapter#1{%
1173 \if@twocolumn\@topnewpage[\@makeschapterhead{#1}]%
1174 \else\@makeschapterhead{#1}\@afterheading\fi}
1175 \def\@makeschapterhead#1{\vspace*{4\baselineskip}
1176 \begin{center} #1 \end{center} \vspace*{1\baselineskip}}
1177 }%
1178 \fi
1179
1180 \ifsffms@novel%
1181 \newcounter{tempcounter}
1182 \newenvironment{synopsis}
1183 {\setcounter{tempcounter}{\value{page}}
1184 \pagenumbering{roman}
1185 \singlespace
1186 \chapter*{Synopsis of \MakeUppercase{\@title}}}
1187 {\clearpage \setcounter{page}{\value{tempcounter}}
1188 \pagenumbering{arabic} \pagestyle{fancy}}%
1189 \else \newenvironment{synopsis}{SYNOPSIS: }{\scenebreak} \fi
1190
1191 \newcommand{\sffms@commonsubsetup}%
1192 {\pagestyle{fancy}
1193 \fancyhead[r]{{\ttfamily \msheadstring}}
1194 \fancyfoot{}
1195 \renewcommand{\headrulewidth}{0pt}
1196 \renewcommand{\footrulewidth}{0pt}
1197 \raggedright
1198 \settowidth{\parindent}{\texttt{~~~~~}}
1199 }
1200
1201
1202 \AtBeginDocument{
1203 \ifsffms@notitle%
1204 \ifsffms@submit \sffms@commonsubsetup \fi%
1205 \else%
1206 \ifsffms@submit%beginning of + 2nd submit if
1207 \sffms@commonsubsetup
1208 \thispagestyle{empty}
1209 \newsavebox{\sffms@fronttopsavebox}
1210 \begin{lrbox}{\sffms@fronttopsavebox}
1211 \begin{minipage}[t]{\textwidth}
1212 \begin{singlespace}%
1213 \ifsffms@daw \hfill\parbox[t]{.40\textwidth}{\raggedright\author@name\\%
1214 \author@address\\[\baselineskip]%
1215 \word@count\ words\\ \disposablestring}%
1216 \else%
1217 \parbox[t]{.65\textwidth}{\author@name\\\author@address}\hfill
1218 \parbox[t]{.30\textwidth}{\raggedleft\word@count\ words\\[\baselineskip]%
1219 \disposablestring}%
1220 \fi%
1221 \end{singlespace}
1222 \end{minipage}
1223 \end{lrbox}
1224 \noindent\raisebox{0pt}[0pt][0pt]{\usebox{\sffms@fronttopsavebox}}
1225 \vspace{0.39\textheight}
1226 \begin{center}\MakeUppercase{\@title}\\by \@author\end{center}
1227 \vspace{1\baselineskip}%
1228 \else \maketitle \setcounter{page}{2} \fi%
1229 \ifsffms@wotf \setcounter{page}{0} \clearpage%
1230 \else \ifsffms@novel\clearpage\fi%
1231 \fi%
1232 \fi%
1233 }
1234
1235 \AtEndDocument{\vspace{12pt}\centerline{\thirtystring}%
1236 \ifsffms@submit%
1237 \wordc=\thepage%
1238 \ifsffms@courier \multiply\wordc by 250%
1239 \else \ifsffms@baen \multiply\wordc by 250%
1240 \else \multiply\wordc by 295 \fi \fi%
1241 \setcounter{wordcounter}{\the\wordc}%
1242 \addtocounter{wordcounter}{-1}%
1243 \refstepcounter{wordcounter}%
1244 \fi%
1245 \label{sffmswc}%
1246 }
1247 %</sffms>
1248 % \end{macrocode}
1249 % \begin{macrocode}
1250 %<*smart>
1251 {%
1252 \catcode`\"=\active
1253 \catcode`\@=11
1254 \gdef\begindoublequotes{%
1255 \global\catcode`\"=\active
1256 \global\chardef\dq=`\"
1257 \global\let\dblqu@te=L
1258 }
1259 \gdef"{\ifinner\else\ifvmode\let\dblqu@te=L\fi\fi
1260 \if L\dblqu@te``\global\let\dblqu@te=R%
1261 \else
1262 \let\xxx=\spacefactor
1263 ''\global\let\dblqu@te=L%
1264 \spacefactor\xxx
1265 \fi
1266 }
1267 }
1268
1269 \gdef\enddoublequotes{\catcode`\"=12}
1270 %</smart>
1271 %<*dumb>
1272 \def\dumbquote{\afterassignment"\let\next= }
1273 \sfcode`\" = 0
1274 \def\rquote{'}
1275 \def\lquote{`}
1276 \catcode`'=\active \def'{\actrq}
1277 \catcode``=\active \def`{\actlq}
1278 \def\rqtest{\ifx\next'\let\next=\dumbquote\else\let\next=\rquote\fi\next}
1279 \def\lqtest{\ifx\next`\let\next=\dumbquote\else\let\next=\lquote\fi\next}
1280 \def\actrq{\futurelet\next\rqtest}
1281 \def\actlq{\futurelet\next\lqtest}
1282 %</dumb>
1283 % \end{macrocode}
1284 %
1285 % \Finale
1286 \endinput
1287