| 1 |
%\iffalse |
| 2 |
% This is file `scale.dtx' |
| 3 |
% |
| 4 |
% Please send error reports and suggestions for improvements to |
| 5 |
% Soeren Sandmann ([email protected]). |
| 6 |
% |
| 7 |
% copyright (C) 1999 Soeren Sandmann Pedersen |
| 8 |
% |
| 9 |
% This program is free software; you can redistribute it and/or |
| 10 |
% modify it under the terms of the GNU General Public License |
| 11 |
% as published by the Free Software Foundation; either version 2 |
| 12 |
% of the License, or (at your option) any later version. |
| 13 |
% |
| 14 |
% This program is distributed in the hope that it will be useful, |
| 15 |
% but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
% GNU General Public License for more details. |
| 18 |
% |
| 19 |
% You should have received a copy of the GNU General Public License |
| 20 |
% along with this program; if not, write to the Free Software |
| 21 |
% Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 22 |
% |
| 23 |
%\fi |
| 24 |
%% \CharacterTable |
| 25 |
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 26 |
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 27 |
%% Digits \0\1\2\3\4\5\6\7\8\9 |
| 28 |
%% Exclamation \! Double quote \" Hash (number) \# |
| 29 |
%% Dollar \$ Percent \% Ampersand \& |
| 30 |
%% Acute accent \' Left paren \( Right paren \) |
| 31 |
%% Asterisk \* Plus \+ Comma \, |
| 32 |
%% Minus \- Point \. Solidus \/ |
| 33 |
%% Colon \: Semicolon \; Less than \< |
| 34 |
%% Equals \= Greater than \> Question mark \? |
| 35 |
%% Commercial at \@ Left bracket \[ Backslash \\ |
| 36 |
%% Right bracket \] Circumflex \^ Underscore \_ |
| 37 |
%% Grave accent \` Left brace \{ Vertical bar \| |
| 38 |
%% Right brace \} Tilde \~} |
| 39 |
%% |
| 40 |
\def\fileversion{v1.1.2} |
| 41 |
\def\filedate{1999/08/13} |
| 42 |
% \CheckSum{43} |
| 43 |
% \iffalse |
| 44 |
%<package>\NeedsTeXFormat{LaTeX2e}[1994/12/01] |
| 45 |
%<package>\ProvidesPackage{scale} |
| 46 |
%<package> [\filedate\space\fileversion] |
| 47 |
%<*driver> |
| 48 |
\documentclass{ltxdoc} |
| 49 |
\begin{document} |
| 50 |
\DocInput{scale.dtx} |
| 51 |
\end{document} |
| 52 |
%</driver> |
| 53 |
% \fi |
| 54 |
% \changes{v1.0}{1996/10/09}{Initial version} |
| 55 |
% \changes{v1.1}{1998/11/02}{Added support for the magstep2 option. Thanks to |
| 56 |
% Rolf Niepraschk ([email protected])} |
| 57 |
% \changes{v1.1.1}{1999/05/13}{Released under the GPL} |
| 58 |
% \changes{v1.1.2}{1999/08/13}{Fixed a bug that caused an error when running \TeX\ on scale.dtx} |
| 59 |
% \title{The \textsf{scale} package\thanks{This file |
| 60 |
% has version number \fileversion, last |
| 61 |
% revised \filedate.}} |
| 62 |
% \author{S\o ren Sandmann\\\texttt{[email protected]}} |
| 63 |
% \date{\filedate} |
| 64 |
% |
| 65 |
% \maketitle |
| 66 |
% |
| 67 |
% \begin{abstract} |
| 68 |
% This package scales an entire document by either 1.44~(|\magstep2|) |
| 69 |
% or by~$\sqrt{2}$. |
| 70 |
% |
| 71 |
% It is useful if you are writing a document on |
| 72 |
% e.g.\ A5 paper and |
| 73 |
% want to print it on A4 paper to achieve better resolution. |
| 74 |
% \end{abstract} |
| 75 |
% |
| 76 |
% \section{Introduction and usage} |
| 77 |
% It is sometimes a good idea to scale a document by $\sqrt{2}$. |
| 78 |
% This is the case if the output is to be photographically |
| 79 |
% reduced. By scaling the document, you will achieve a resolution that is |
| 80 |
% approximately $\sqrt{2}$ times better. |
| 81 |
% |
| 82 |
% Example: You are preparing a document for A5 paper, and your printer |
| 83 |
% has a resolution that is 300\,dpi and uses A4 paper. If you use this |
| 84 |
% package, your document will be scaled by $\sqrt{2}$. After |
| 85 |
% photographical reduction, the resolution will be $\sqrt{2}\cdot |
| 86 |
% 300\,\mathrm{dpi}\approx 424\,\mathrm{dpi}$. The package is not restricted |
| 87 |
% to A5 paper; it will work with any paper format, simply scaling the |
| 88 |
% document by $\sqrt{2}$. |
| 89 |
% |
| 90 |
% To use use the package, just include it in a |\usepackage{...}| |
| 91 |
% statement. Your system must be able to scale your fonts arbitrarily, |
| 92 |
% e.g.\ by making them on the fly or by using PostScript fonts. |
| 93 |
% |
| 94 |
% There is an option to scale the document by |\magstep2| instead of |
| 95 |
% $\sqrt{2}$. You might want to use this as it, while not being as |
| 96 |
% exact, avoids much of font generation. |
| 97 |
% |
| 98 |
% To use this feature use the option `magstep2', like this: |
| 99 |
% \begin{quote} |
| 100 |
% |\usepackage[magstep2]{scale}| |
| 101 |
% \end{quote} |
| 102 |
% Thanks to Rolf Niepraschk |
| 103 |
% ([email protected]) for the code for the above option |
| 104 |
% and for some additional cleanups. |
| 105 |
% |
| 106 |
% The default is to scale by $\sqrt{2}$ |
| 107 |
% \StopEventually{} |
| 108 |
% |
| 109 |
% \section{The implementation} |
| 110 |
% All we need to do is to add a certain length to every margin and set |
| 111 |
% |\mag=1414| og |\mag=\magstep2|: |
| 112 |
% \begin{macrocode} |
| 113 |
%<*package> |
| 114 |
\newcommand\do@scale{} |
| 115 |
\DeclareOption{sqrt2}{% |
| 116 |
\renewcommand\do@scale{% |
| 117 |
\typeout{*** scaling: sqrt(2) = 1.414 ***} |
| 118 |
\setlength\@tempdima{0.292893219in}% (1-(1/sqrt(2)))in |
| 119 |
\addtolength\oddsidemargin{\@tempdima} |
| 120 |
\addtolength\evensidemargin{\@tempdima} |
| 121 |
\addtolength\topmargin{\@tempdima} |
| 122 |
\mag=1414} |
| 123 |
} |
| 124 |
% \end{macrocode} |
| 125 |
% |
| 126 |
% The magic number 0.292893219 is calculated the following way (using |
| 127 |
% |\oddside|\-|margin| as example. Let $o$ be the old |\oddsidemargin|, |
| 128 |
% let $h$ be the |\hoffset|, let $i$ be the initial offset (this is always |
| 129 |
% $1\,\mathrm{in}$), and let $m$ be the real margin (the one we see on |
| 130 |
% the paper). By the primed versions of the variables we mean the `new' |
| 131 |
% one; i.e., $o'$ is the new |\oddsidemargin|. We define a function $f$ to |
| 132 |
% stand for the application of |\mag=1414|. This function does \emph{not} |
| 133 |
% change the initial offset $i$. |
| 134 |
% |
| 135 |
% The real margin $m$ is calculated as: |
| 136 |
% \[m=i+h+o\] |
| 137 |
% We want our new margin to be $\sqrt{2}$ times longer than the old one: |
| 138 |
% \[m'=\sqrt{2}\,m=f(i+h'+o'),\] |
| 139 |
% This implies (since $f$ doesn't change $i$) that |
| 140 |
% \begin{eqnarray*} |
| 141 |
% &\sqrt{2}\,m=i + \sqrt{2}\,h' + \sqrt{2}\,o'\\ |
| 142 |
% \Longrightarrow\;&o'= |
| 143 |
% {\displaystyle\frac{\sqrt{2}\,m-\sqrt{2}\,h'-i}{\sqrt{2}}} |
| 144 |
% =m-h'-{\displaystyle\frac{1}{\sqrt{2}}}i |
| 145 |
% =i+o+h-h'-{\displaystyle\frac{1}{\sqrt{2}}}i |
| 146 |
% \end{eqnarray*} |
| 147 |
% We can just take $h'$ to be the same as $h$ and get |
| 148 |
% \[o'=o+i-\frac{1}{\sqrt{2}}i\approx o+0.292893219\,\mathrm{in}.\] |
| 149 |
% |
| 150 |
% For the magstep2 option similar calculations give: |
| 151 |
% \begin{macrocode} |
| 152 |
\DeclareOption{magstep2}{% |
| 153 |
\renewcommand\do@scale{% |
| 154 |
\typeout{*** scaling: magstep2 = 1.440 (1.2^2) ***} |
| 155 |
\setlength\@tempdima{0.305555555555556in}% (1-(1/1.2^2))in |
| 156 |
\addtolength\oddsidemargin{\@tempdima} |
| 157 |
\addtolength\evensidemargin{\@tempdima} |
| 158 |
\addtolength\topmargin{\@tempdima} |
| 159 |
\mag=\magstep2} |
| 160 |
} |
| 161 |
% \end{macrocode} |
| 162 |
% |
| 163 |
% All we need to do now is to make sqrt2 the default and execute |
| 164 |
% |\do@scale| at the beginning of the document: |
| 165 |
% \begin{macrocode} |
| 166 |
\ExecuteOptions{sqrt2} |
| 167 |
\ProcessOptions |
| 168 |
\AtBeginDocument{\do@scale\global\let\do@scale\@empty} |
| 169 |
%</package> |
| 170 |
% \end{macrocode} |
| 171 |
% \Finale |
| 172 |
\endinput |