Debian Codegraph @

texmf-dist/source/latex/sauterfonts/sauterfonts.fdd

raw
1 %%
2 %% Copyleft 1998 Klaus G. Barthelmann
3 %<*driver>
4 % This file is provided under the GNU General Public License version 2
5 \documentclass{article}
6 \begin{document}
7 \title{The \textit{sauterfonts} archive}
8 \author{Klaus G. Barthelmann}
9 \date{1998/11/11}
10 \maketitle
11 \section{What you find in the archive}
12 When I tried to typeset my documents in a higher quality than usual, I noticed
13 with surprise that there seemed to be no easy way to access the whole range of
14 Sauter's (Knappen's, Holin's) fonts. (As you probably know, these fonts are
15 available in every pointsize and can be generated on the fly in today's \TeX\
16 installations.) To get around this problem, this archive contains replacements
17 for the following standard files:
18 \begin{itemize}
19 \item
20 \texttt{exscale.sty}, \texttt{omxcmex.fd} (normally unchanged),
21 \texttt{omlcmm.fd}, \texttt{omlcmr.fd} (unchanged), \texttt{omscmr.fd}
22 (unchanged), \texttt{omscmsy.fd}, \texttt{ot1cmdh.fd}, \texttt{ot1cmfib.fd},
23 \texttt{ot1cmfr.fd}, \texttt{ot1cmr.fd}, \texttt{ot1cmss.fd},
24 \texttt{ot1cmtt.fd}, \texttt{ot1cmvtt.fd}, \texttt{ucmr.fd},
25 \texttt{ucmss.fd}, \texttt{ucmtt.fd}, \texttt{ulasy.fd} from the
26 \textit{base} distribution;
27 \item
28 \texttt{umsa.fd} and \texttt{umsb.fd} from the \textit{amsfonts}
29 distribution;
30 \item
31 \texttt{ubbold.fd}, \texttt{ursfs.fd} and \texttt{ustmary.fd} (which should
32 be \texttt{ustmry.fd}) from the \textit{jknappen} distribution (older
33 versions of \texttt{ubbold.fd} and \texttt{ustmry.fd} are provided together
34 with the fonts);
35 \item
36 \texttt{uwasy.fd} from the \textit{wasysym} distribution;
37 \item
38 \texttt{ubbm.fd}, \texttt{ubbmdh.fd}, \texttt{ubbmfib.fd},
39 \texttt{ubbmss.fd}, \texttt{ubbmtt.fd}, \texttt{ubbmvtt.fd} (partly) from the
40 \textit{bbm} distribution.
41 \end{itemize}
42 However, all filenames are preceded by a prefix (normally \texttt{s}). See
43 below. Besides that, there is the file \texttt{sbbm.sty} which is meant to
44 replace the corresponding file from the \textit{bbm} distribution.
45
46 \section{Before you unpack this archive}
47 What files you get depends on some settings. They can be found near the top
48 of the driver file. Note that it is not necessary (and probably not even
49 desirable) to change any of them.
50
51 To keep the modified versions separate from the original files, every filename
52 is preceded by a prefix (normally \texttt{s} for ``Sauter''). You can change it
53 to your liking, but you should not omit it.\footnote{As I think you know how to
54 rename the files anyway, I decided to provide this simple solution.} Although
55 the files are most effective without any prefix, let me warn you: At least you
56 must not give them away to anybody else. The standard files and their contents
57 are copyrighted, no modifications are allowed. The reason behind this is to
58 guarantee portability of documents between all \LaTeXe\ installations. With the
59 modified files, documents may look differently than normal. After all, this is
60 the purpose of this distribution.
61
62 If you add the option \texttt{ec}, font names will obey the same format as in
63 the EC~fonts. That is, the font size is multiplied by~100 and occupies four
64 digits. If you add the option \texttt{scalex}, the \texttt{cmex} font is
65 scaled by default. (I am not sure that this has any useful effect.) Normally,
66 this is the task of the package \textit{exscale}. (But note that the file
67 \texttt{sexscale.sty} is affected by the option \texttt{ec} and not by the
68 option \texttt{scalex}.)
69
70 \section{How you use these files}
71 The file \texttt{sexscale.sty} (funny name \dots) is used in the obvious way
72 with
73 \begin{flushleft}
74 \verb'\usepackage{sexscale}'
75 \end{flushleft}
76 in place of the package \textit{exscale}. If you changed the prefix, it will
77 issue a warning that its name differs from the filename.
78
79 The font definition files are input as you need them. (Sorry, either you have
80 to fool \LaTeXe's font loading mechanism as indicated or you must replace the
81 standard packages containing font and symbol declarations.) At least you should
82 type
83 \begin{flushleft}
84 \verb'\makeatletter'
85 \\ \verb'\input{somlcmm.fd}'
86 \\ \verb'\input{somscmsy.fd}'
87 \\ \verb'\input{somxcmex.fd}'
88 \\ \verb'\input{sucmr.fd}'
89 \\ \verb'\input{sot1cmr.fd}'
90 \\ \verb'\input{sot1cmss.fd}'
91 \\ \verb'\input{sot1cmtt.fd}'
92 \\ \verb'\makeatother'
93 \end{flushleft}
94 to override the preloaded font families in your \LaTeXe\ format (if you did not
95 provide configuration files \texttt{fontmath.cfg} and\slash or
96 \texttt{fonttext.cfg}). You can insert these (and similar) lines even before
97 the \verb'\documentclass' command.
98
99 \section{The package \textit{sbbm}}
100 If you type
101 \begin{flushleft}
102 \verb'\usepackage{sbbm}'
103 \end{flushleft}
104 the math font command \verb'\mathbb' is (re)defined and the symbols
105 \verb'\Lparen', \verb'\Rparen', \verb'\Lbrack', \verb'\Rbrack' are introduced.
106 Unlike the same command in the \textit{amsfonts} package, \verb'\mathbb'
107 applies to lowercase letters and the digits 1, 2 as well. In my opinion, the
108 blackboard bold letters from the \textit{bbm} font look better than their AMS
109 counterparts in combination with the roman font. (Another alternative outside
110 Sauter's collection is the font \textit{doublestroke}.)
111
112 Strictly speaking, there are also some options:
113 \begin{flushleft}
114 \verb'\usepackage['\textit{family and\slash or shape}\verb']{sbbm}'
115 \end{flushleft}
116 will load the blackboard bold symbols in a different family and\slash or shape.
117 Available families are \texttt{rm} (the default), \texttt{sf} and also
118 \texttt{tt}. Note that there is no bold typewriter font. Available shapes are
119 \texttt{up} (the default) and \texttt{sl}. I do not claim that anything else
120 than the default is desirable.
121
122 \section{Finally \dots}
123 Please direct complaints, suggestions etc.\ (for unchanged versions) to
124 me,\newline
125 \texttt{[email protected]}. Enjoy!
126 \end{document}
127 %</driver>
128 %<exscale>\NeedsTeXFormat{LaTeX2e}
129 %<exscale>\ProvidesPackage{sexscale}
130 %<exscale> [1998/11/11 Modified LaTeX package exscale]
131 %<omxcmex>\ProvidesFile{somxcmex.fd}
132 %<omlcmm>\ProvidesFile{somlcmm.fd}
133 %<omlcmr>\ProvidesFile{somlcmr.fd}
134 %<omscmr>\ProvidesFile{somscmr.fd}
135 %<omscmsy>\ProvidesFile{somscmsy.fd}
136 %<ot1cmdh>\ProvidesFile{sot1cmdh.fd}
137 %<ot1cmfib>\ProvidesFile{sot1cmfib.fd}
138 %<ot1cmfr>\ProvidesFile{sot1cmfr.fd}
139 %<ot1cmr>\ProvidesFile{sot1cmr.fd}
140 %<ot1cmss>\ProvidesFile{sot1cmss.fd}
141 %<ot1cmtt>\ProvidesFile{sot1cmtt.fd}
142 %<ot1cmvtt>\ProvidesFile{sot1cmvtt.fd}
143 %<ubbm>\ProvidesFile{subbm.fd}
144 %<ubbmdh>\ProvidesFile{subbmdh.fd}
145 %<ubbmfib>\ProvidesFile{subbmfib.fd}
146 %<ubbmss>\ProvidesFile{subbmss.fd}
147 %<ubbmtt>\ProvidesFile{subbmtt.fd}
148 %<ubbmvtt>\ProvidesFile{subbmvtt.fd}
149 %<ubbold>\ProvidesFile{subbold.fd}
150 %<ucmr>\ProvidesFile{sucmr.fd}
151 %<ucmss>\ProvidesFile{sucmss.fd}
152 %<ucmtt>\ProvidesFile{sucmtt.fd}
153 %<ulasy>\ProvidesFile{sulasy.fd}
154 %<umsa>\ProvidesFile{sumsa.fd}
155 %<umsb>\ProvidesFile{sumsb.fd}
156 %<ursfs>\ProvidesFile{sursfs.fd}
157 %<ustmary>\ProvidesFile{sustmry.fd}
158 %<uwasy>\ProvidesFile{suwasy.fd}
159 %<!exscale> [1998/11/11 Modified LaTeX font definitions]
160 %<*omxcmex&scalex|family>
161 \providecommand*\sauter@family[5]{%
162 %<*ec>
163 \DeclareFontShape{#1}{#2}{#3}{#4}{%
164 <5><6><7><8><9><10><10.95><12><14.4><17.28><20.74><24.88><29.86>%
165 <35.83>genb*#5}{}}
166 %</ec>
167 %<*!ec>
168 \DeclareFontShape{#1}{#2}{#3}{#4}{%
169 <5><6><7><8><9><10><12>gen*#5%
170 <10.95>#511<14.4>#514<17.28>#517<20.74>#520% shouldn't this be 21?
171 <24.88>#525<29.86>#530<35.83>#536% not sure that the last two will work
172 }{}}
173 %</!ec>
174 %</omxcmex&scalex|family>
175 %<*ttfamily>
176 \providecommand*\sauter@ttfamily[5]{%
177 %<*ec>
178 \DeclareFontShape{#1}{#2}{#3}{#4}{%
179 <5><6><7><8>#50800%
180 <9><10><10.95><12><14.4><17.28><20.74><24.88><29.86>%
181 <35.83>genb*#5}{}}
182 %</ec>
183 %<*!ec>
184 \DeclareFontShape{#1}{#2}{#3}{#4}{%
185 <5><6><7><8>#58%
186 <9><10><12>gen*#5%
187 <10.95>#511<14.4>#514<17.28>#517<20.74>#520% shouldn't this be 21?
188 <24.88>#525<29.86>#530<35.83>#536% not sure that the last two will work
189 }{}}
190 %</!ec>
191 %</ttfamily>
192 %<*exscale>
193 \sauter@family{OMX}{cmex}{m}{n}{cmex}
194 \DeclareSymbolFont{largesymbols}{OMX}{cmex}{m}{n}
195 \newdimen\big@size
196 \addto@hook\every@math@size{\setbox\z@\vbox{\hbox{$($}\kern\z@}%
197 \global\big@size 1.2\ht\z@}
198 \def\bBigg@#1#2{%
199 {\hbox{$\left#2\vcenter to#1\big@size{}\right.\n@space$}}}
200 \def\big{\bBigg@\@ne}
201 \def\Big{\bBigg@{1.5}}
202 \def\bigg{\bBigg@\tw@}
203 \def\Bigg{\bBigg@{2.5}}
204 %</exscale>
205 %<*omxcmex>
206 \DeclareFontFamily{OMX}{cmex}{}
207 %<*scalex>
208 \sauter@family{OMX}{cmex}{m}{n}{cmex}
209 %</scalex>
210 %<*!scalex>
211 \DeclareFontShape{OMX}{cmex}{m}{n}{%
212 <->sfixed*cmex10%
213 }{}
214 %</!scalex>
215 %</omxcmex>
216 %<*omlcmm>
217 \DeclareFontFamily{OML}{cmm}{\skewchar\font127 }
218 \sauter@family{OML}{cmm}{m}{it}{cmmi}
219 \sauter@family{OML}{cmm}{b}{it}{cmmib}
220 \DeclareFontShape{OML}{cmm}{bx}{it}%
221 {<->ssub*cmm/b/it}{}
222 %</omlcmm>
223 %<*omlcmr>
224 \DeclareFontFamily{OML}{cmr}{\skewchar\font127 }
225 \DeclareFontShape{OML}{cmr}{m}{n}%
226 {<->ssub*cmm/m/it}{}
227 \DeclareFontShape{OML}{cmr}{m}{it}%
228 {<->ssub*cmm/m/it}{}
229 \DeclareFontShape{OML}{cmr}{m}{sl}%
230 {<->ssub*cmm/m/it}{}
231 \DeclareFontShape{OML}{cmr}{m}{sc}%
232 {<->ssub*cmm/m/it}{}
233 \DeclareFontShape{OML}{cmr}{bx}{n}%
234 {<->ssub*cmm/b/it}{}
235 \DeclareFontShape{OML}{cmr}{bx}{it}%
236 {<->ssub*cmm/b/it}{}
237 \DeclareFontShape{OML}{cmr}{bx}{sl}%
238 {<->ssub*cmm/b/it}{}
239 \DeclareFontShape{OML}{cmr}{bx}{sc}%
240 {<->ssub*cmm/b/it}{}
241 %</omlcmr>
242 %<*omscmr>
243 \DeclareFontFamily{OMS}{cmr}{\skewchar\font48 }
244 \DeclareFontShape{OMS}{cmr}{m}{n}%
245 {<->ssub*cmsy/m/n}{}
246 \DeclareFontShape{OMS}{cmr}{m}{it}%
247 {<->ssub*cmsy/m/n}{}
248 \DeclareFontShape{OMS}{cmr}{m}{sl}%
249 {<->ssub*cmsy/m/n}{}
250 \DeclareFontShape{OMS}{cmr}{m}{sc}%
251 {<->ssub*cmsy/m/n}{}
252 \DeclareFontShape{OMS}{cmr}{bx}{n}%
253 {<->ssub*cmsy/b/n}{}
254 \DeclareFontShape{OMS}{cmr}{bx}{it}%
255 {<->ssub*cmsy/b/n}{}
256 \DeclareFontShape{OMS}{cmr}{bx}{sl}%
257 {<->ssub*cmsy/b/n}{}
258 \DeclareFontShape{OMS}{cmr}{bx}{sc}%
259 {<->ssub*cmsy/b/n}{}
260 %</omscmr>
261 %<*omscmsy>
262 \DeclareFontFamily{OMS}{cmsy}{\skewchar\font48 }
263 \sauter@family{OMS}{cmsy}{m}{n}{cmsy}
264 \sauter@family{OMS}{cmsy}{b}{n}{cmbsy}
265 %</omscmsy>
266 %<*ot1cmdh>
267 \DeclareFontFamily{OT1}{cmdh}{\hyphenchar\font45 }
268 \sauter@family{OT1}{cmdh}{m}{n}{cmdunh}
269 %</ot1cmdh>
270 %<*ot1cmfib>
271 \DeclareFontFamily{OT1}{cmfib}{\hyphenchar\font45 }
272 \sauter@family{OT1}{cmfib}{m}{n}{cmfib}
273 %</ot1cmfib>
274 %<*ot1cmfr>
275 \DeclareFontFamily{OT1}{cmfr}{\hyphenchar\font45 }
276 \sauter@family{OT1}{cmfr}{m}{n}{cmff}
277 \sauter@family{OT1}{cmfr}{m}{it}{cmfi}
278 %</ot1cmfr>
279 %<*ot1cmr>
280 \DeclareFontFamily{OT1}{cmr}{\hyphenchar\font45 }
281 \sauter@family{OT1}{cmr}{m}{n}{cmr}
282 \sauter@family{OT1}{cmr}{m}{sl}{cmsl}
283 \sauter@family{OT1}{cmr}{m}{it}{cmti}
284 \sauter@family{OT1}{cmr}{m}{sc}{cmcsc}
285 %<<COMMENT
286 % Warning: please note that the upright shape below is
287 % used for the \pounds symbol of LaTeX. So this
288 % font definition shouldn't be removed.
289 %
290 %COMMENT
291 \sauter@family{OT1}{cmr}{m}{ui}{cmu}
292 %%%%%%% bold series
293 \sauter@family{OT1}{cmr}{b}{n}{cmb}
294 %%%%%%%% bold extended series
295 \sauter@family{OT1}{cmr}{bx}{n}{cmbx}
296 \sauter@family{OT1}{cmr}{bx}{sl}{cmbxsl}
297 \sauter@family{OT1}{cmr}{bx}{it}{cmbxti}
298 %<<COMMENT
299 %\sauter@family{OT1}{cmr}{bx}{sc}{cmbxsc}
300 % Again this is necessary for a correct \pounds symbol in
301 % the cmr fonts Hopefully the dc/ec font layout will take
302 % over soon.
303 %
304 %COMMENT
305 \DeclareFontShape{OT1}{cmr}{bx}{ui}
306 {<->ssub*cmr/m/ui}{}
307 %</ot1cmr>
308 %<*ot1cmss>
309 \DeclareFontFamily{OT1}{cmss}{\hyphenchar\font45 }
310 \sauter@family{OT1}{cmss}{m}{n}{cmss}
311 %<<COMMENT
312 % Font undefined, therefore substituted
313 %COMMENT
314 \DeclareFontShape{OT1}{cmss}{m}{it}
315 {<->sub*cmss/m/sl}{}
316 \sauter@family{OT1}{cmss}{m}{sl}{cmssi}
317 %%%%%%% Font/shape undefined, therefore substituted
318 \DeclareFontShape{OT1}{cmss}{m}{sc}
319 {<->sub*cmr/m/sc}{}
320 %%%%%%% Font/shape undefined, therefore substituted
321 \DeclareFontShape{OT1}{cmss}{m}{ui}
322 {<->sub*cmr/m/ui}{}
323 %%%%%%%% semibold condensed series
324 \sauter@family{OT1}{cmss}{sbc}{n}{cmssdc}
325
326 %%%%%%%%% bold extended series
327 \sauter@family{OT1}{cmss}{bx}{n}{cmssbx}
328 %%%%%%% Font/shape undefined, therefore substituted
329 \DeclareFontShape{OT1}{cmss}{bx}{ui}
330 {<->sub*cmr/bx/ui}{}
331 %</ot1cmss>
332 %<*ot1cmtt>
333 \DeclareFontFamily{OT1}{cmtt}{\hyphenchar \font\m@ne}
334 \sauter@ttfamily{OT1}{cmtt}{m}{n}{cmtt}
335 %%%%%% make sure subst shapes are available
336 \sauter@ttfamily{OT1}{cmtt}{m}{it}{cmitt}
337 \sauter@ttfamily{OT1}{cmtt}{m}{sl}{cmsltt}
338 \sauter@ttfamily{OT1}{cmtt}{m}{sc}{cmtcsc}
339 \DeclareFontShape{OT1}{cmtt}{m}{ui}
340 {<->ssub*cmtt/m/it}{}
341 \DeclareFontShape{OT1}{cmtt}{bx}{n}
342 {<->ssub*cmtt/m/n}{}
343 \DeclareFontShape{OT1}{cmtt}{bx}{it}
344 {<->ssub*cmtt/m/it}{}
345 \DeclareFontShape{OT1}{cmtt}{bx}{ui}
346 {<->ssub*cmtt/m/it}{}
347 %</ot1cmtt>
348 %<*ot1cmvtt>
349 \DeclareFontFamily{OT1}{cmvtt}{\hyphenchar\font45 }
350 \sauter@ttfamily{OT1}{cmvtt}{m}{n}{cmvtt}
351 %%%%%%% Font/shape undefined, therefore substituted
352 \DeclareFontShape{OT1}{cmvtt}{m}{it}
353 {<->sub*cmvtt/m/n}{}
354 %</ot1cmvtt>
355 %<*ubbm>
356 \DeclareFontFamily{U}{bbm}{}
357 \sauter@family{U}{bbm}{m}{n}{bbm}
358 \sauter@family{U}{bbm}{m}{sl}{bbmsl}
359 %%%%%%% bold series
360 \sauter@family{U}{bbm}{b}{n}{bbmb}
361 %%%%%%%% bold extended series
362 \sauter@family{U}{bbm}{bx}{n}{bbmbx}
363 \sauter@family{U}{bbm}{bx}{sl}{bbmbxsl}
364 %</ubbm>
365 %<*ubbmdh>
366 \DeclareFontFamily{U}{bbmdh}{}
367 \sauter@family{U}{bbmdh}{m}{n}{bbmdunh}
368 %</ubbmdh>
369 %<*ubbmfib>
370 \DeclareFontFamily{U}{bbmfib}{}
371 \sauter@family{U}{bbmfib}{m}{n}{bbmfib}
372 %</ubbmfib>
373 %<*ubbmss>
374 \DeclareFontFamily{U}{bbmss}{}
375 \sauter@family{U}{bbmss}{m}{n}{bbmss}
376 \sauter@family{U}{bbmss}{m}{sl}{bbmssi}
377 %%%%%%%% semibold condensed series
378 \sauter@family{U}{bbmss}{sbc}{n}{bbmssdc}
379
380 %%%%%%%% bold extended series
381 \sauter@family{U}{bbmss}{bx}{n}{bbmssbx}
382 %</ubbmss>
383 %<*ubbmtt>
384 \DeclareFontFamily{U}{bbmtt}{}
385 \sauter@ttfamily{U}{bbmtt}{m}{n}{bbmtt}
386 %%%%%% make sure subst shapes are available
387 \sauter@ttfamily{U}{bbmtt}{m}{sl}{bbmsltt}
388 %</ubbmtt>
389 %<*ubbmvtt>
390 \DeclareFontFamily{U}{bbmvtt}{}
391 \sauter@ttfamily{U}{bbmvtt}{m}{n}{bbmvtt}
392 %%%%%%% Font/shape undefined, therefore substituted
393 \DeclareFontShape{U}{bbmvtt}{m}{it}
394 {<->sub*bbmvtt/m/n}{}
395 %</ubbmvtt>
396 %<*ubbold>
397 \DeclareFontFamily{U}{bbold}{}
398 \sauter@family{U}{bbold}{m}{n}{bbold}
399 %</ubbold>
400 %<*ucmr>
401 \DeclareFontFamily{U}{cmr}{\hyphenchar\font45 }
402 \sauter@family{U}{cmr}{m}{n}{cmr}
403 \sauter@family{U}{cmr}{m}{sl}{cmsl}
404 \sauter@family{U}{cmr}{m}{it}{cmti}
405 \sauter@family{U}{cmr}{m}{sc}{cmcsc}
406 %<<COMMENT
407 % Warning: please note that the upright shape below is
408 % used for the \pounds symbol of LaTeX. So this
409 % font definition shouldn't be removed.
410 %
411 %COMMENT
412 \sauter@family{U}{cmr}{m}{ui}{cmu}
413 %%%%%%% bold series
414 \sauter@family{U}{cmr}{b}{n}{cmb}
415 %%%%%%%% bold extended series
416 \sauter@family{U}{cmr}{bx}{n}{cmbx}
417 \sauter@family{U}{cmr}{bx}{sl}{cmbxsl}
418 \sauter@family{U}{cmr}{bx}{it}{cmbxti}
419 %<<COMMENT
420 %\sauter@family{U}{cmr}{bx}{sc}{cmbxsc}
421 % Again this is necessary for a correct \pounds symbol in
422 % the cmr fonts Hopefully the dc/ec font layout will take
423 % over soon.
424 %
425 %COMMENT
426 \DeclareFontShape{U}{cmr}{bx}{ui}%
427 {<->ssub*cmr/m/ui}{}
428 %</ucmr>
429 %<*ucmss>
430 \DeclareFontFamily{U}{cmss}{\hyphenchar\font45 }
431 \sauter@family{U}{cmss}{m}{n}{cmss}
432 %<<COMMENT
433 % Font undefined, therefore substituted
434 %COMMENT
435 \DeclareFontShape{U}{cmss}{m}{it}
436 {<->sub*cmss/m/sl}{}
437 \sauter@family{U}{cmss}{m}{sl}{cmssi}
438 %%%%%%% Font/shape undefined, therefore substituted
439 \DeclareFontShape{U}{cmss}{m}{sc}
440 {<->sub*cmr/m/sc}{}
441 %%%%%%% Font/shape undefined, therefore substituted
442 \DeclareFontShape{U}{cmss}{m}{ui}
443 {<->sub*cmr/m/ui}{}
444 %%%%%%%% semibold condensed series
445 \sauter@family{U}{cmss}{sbc}{n}{cmssdc}
446
447 %%%%%%%%% bold extended series
448 \sauter@family{U}{cmss}{bx}{n}{cmssbx}
449 %%%%%%% Font/shape undefined, therefore substituted
450 \DeclareFontShape{U}{cmss}{bx}{ui}
451 {<->sub*cmr/bx/ui}{}
452 %</ucmss>
453 %<*ucmtt>
454 \DeclareFontFamily{U}{cmtt}{\hyphenchar \font\m@ne}
455 \sauter@ttfamily{U}{cmtt}{m}{n}{cmtt}
456 %%%%%% make sure subst shapes are available
457 \sauter@ttfamily{U}{cmtt}{m}{it}{cmitt}
458 \sauter@ttfamily{U}{cmtt}{m}{sl}{cmsltt}
459 \sauter@ttfamily{U}{cmtt}{m}{sc}{cmtcsc}
460 \DeclareFontShape{U}{cmtt}{m}{ui}
461 {<->ssub*cmtt/m/it}{}
462 \DeclareFontShape{U}{cmtt}{bx}{n}
463 {<->ssub*cmtt/m/n}{}
464 \DeclareFontShape{U}{cmtt}{bx}{it}
465 {<->ssub*cmtt/m/it}{}
466 \DeclareFontShape{U}{cmtt}{bx}{ui}
467 {<->ssub*cmtt/m/it}{}
468 %</ucmtt>
469 %<*ulasy>
470 \DeclareFontFamily{U}{lasy}{}
471 \sauter@family{U}{lasy}{m}{n}{lasy}
472 \sauter@family{U}{lasy}{b}{n}{lasyb}
473 %</ulasy>
474 %<*umsa>
475 \DeclareFontFamily{U}{msa}{}
476 \sauter@family{U}{msa}{m}{n}{msam}
477 %</umsa>
478 %<*umsb>
479 \DeclareFontFamily{U}{msb}{}
480 \sauter@family{U}{msb}{m}{n}{msbm}
481 %</umsb>
482 %<*ursfs>
483 \DeclareFontFamily{U}{rsfs}{\skewchar\font127 }
484 \sauter@family{U}{rsfs}{m}{n}{rsfs}
485 %</ursfs>
486 %<*ustmary>
487 \DeclareFontFamily{U}{stmry}{}
488 \sauter@family{U}{stmry}{m}{n}{stmary}
489 \DeclareFontShape{U}{stmry}{b}{n}%
490 {<->sub*stmry/m/n}{}
491 %</ustmary>
492 %<*uwasy>
493 \DeclareFontFamily{U}{wasy}{}
494 \sauter@family{U}{wasy}{m}{n}{wasy}
495 \sauter@family{U}{wasy}{b}{n}{wasyb}
496 %</uwasy>