Debian Codegraph @

texmf-dist/source/latex/revtex4-1/aip.dtx

raw
1 % \iffalse meta-comment
2 % aip.dtx: package to change page grid, MVL.
3 % Copyright (c) 2008 American Institute of Physics
4 % mailto:[email protected]
5 %
6 % Disclaimer
7 % This file is distributed WITHOUT ANY WARRANTY;
8 % without even the implied warranty of
9 % MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
10 % License
11 % You may distribute this file under the conditions of the
12 % LaTeX Project Public License 1.3 or later
13 % (http://www.latex-project.org/lppl.txt).
14 % ReadMe
15 % For the documentation and more detailed instructions for
16 % installation, typeset this document with \LaTeX.
17 % Maintenance Status
18 % This work has the LPPL maintenance status "maintained";
19 % Current Maintainer of this work is Arthur Ogawa.
20 %
21 % This work consists of the main source file aip.dtx
22 % and the derived files
23 % aip.rtx, aip.pdf, aip.ins, aip.drv.
24 % Distribution:
25 % CTAN:macros/latex/contrib/aip/
26 %
27 % Unpacking:
28 % tex aip.dtx
29 %
30 % Documentation:
31 % latex aip.dtx; ...
32 %
33 % Programm calls to get the documentation (example):
34 % pdflatex aip.dtx
35 % makeindex -s gind.ist aip
36 % makeindex -s gglo.ist -o aip.gls aip.glo
37 % pdflatex aip.dtx
38 % makeindex -s gind.ist aip
39 % pdflatex aip.dtx
40 %
41 % Installation:
42 % TDS:bibtex/bst/aip/
43 % TDS:doc/latex/aip/
44 % TDS:source/latex/aip/
45 % TDS:tex/latex/aip/
46 %
47 % Thanks, Heiko!
48 % This method of letting a single .dtx file serve as both
49 % documentation (via latex) and installer (via tex) follows
50 % the example of Heiko Oberdiek. Thanks!
51 %<*ignore>
52 \begingroup
53 \def\x{LaTeX2e}%
54 \expandafter\endgroup
55 \ifcase
56 0\expandafter\ifx\csname processbatchFile\endcsname\relax\else1\fi\ifx\fmtname\x\else 1\fi
57 \relax
58 \else
59 \csname fi\endcsname
60 %</ignore>
61 %<*install>
62 %% This file will generate documentation and runtime files
63 %% from aip.dtx when run through LaTeX or TeX.
64 %% This file requires docstrip version 2.4 or higher available from
65 %% ftp://ctan.tug.org/tex-archive/macros/latex/unpacked/docstrip.tex
66 \input docstrip
67 \preamble
68
69 This is a generated file;
70 altering it directly is inadvisable;
71 instead, modify the original source file.
72 See the URL in the file README.
73
74 Copyright (c) 2008 American Institute of Physics.
75 mailto:[email protected]
76
77 Maintained by Arthur Ogawa (mailto:arthur_ogawa at sbcglobal.net)
78 under contract to American Institute of Physics.
79
80 License
81 You may distribute this file under the conditions of the
82 LaTeX Project Public License 1.3 or later
83 (http://www.latex-project.org/lppl.txt).
84
85 This file is distributed WITHOUT ANY WARRANTY;
86 without even the implied warranty of MERCHANTABILITY
87 or FITNESS FOR A PARTICULAR PURPOSE.
88
89 \endpreamble
90 \askforoverwritefalse
91 \keepsilent
92 \generate{%
93 %{ignore}
94 % \file{aip.ins}{\from{aip.dtx}{install}}%
95 % \file{aip.drv}{\from{aip.dtx}{driver}}%
96 % \usedir{tex/latex/aip}%
97 \file{aip4-1.rtx}{\from{aip.dtx}{package}}%
98 }%
99 \ifToplevel{
100 \Msg{***********************************************************}
101 \Msg{*}
102 \Msg{* To finish the installation, please move}
103 \Msg{* aip.rtx}
104 \Msg{* into a directory searched by TeX;}
105 \Msg{* in a TDS-compliant installation:}
106 \Msg{* texmf/tex/macros/latex/aip/.}
107 \Msg{*}
108 \Msg{* To produce the documentation,
109 run aip.dtx through LaTeX.}
110 \Msg{*}
111 \Msg{* Happy TeXing}
112 \Msg{***********************************************************}
113 }
114 \endbatchfile
115 %</install>
116 %<*ignore>
117 \fi
118 %</ignore>
119 % \fi
120 %
121 % \GetFileInfo{aip.dtx}
122 %
123 % \iffalse ltxdoc klootch
124 %<*package>
125 %%% @LaTeX-file{
126 %%% filename = "aip.dtx",
127 %%% version = "4.1s",
128 %%% date = "2020/09/30",
129 %%% author = "Arthur Ogawa (mailto:arthur_ogawa at sbcglobal.net),
130 %%% commissioned by the American Institute of Physics.
131 %%% ",
132 %%% copyright = "Copyright (C) 2008 American Institute of Physics,
133 %%% distributed under the terms of the
134 %%% LaTeX Project Public License, see
135 %%% ftp://ctan.tug.org/macros/latex/base/lppl.txt
136 %%% ",
137 %%% address = "AIP Journal Program
138 %%% American Institute of Physics,
139 %%% Suite 1NO1, 2 Huntington Quadrangle,
140 %%% Melville, NY 11747 USA",
141 %%% telephone = "",
142 %%% FAX = "",
143 %%% email = "mailto colon tex at aip.org",
144 %%% codetable = "ISO/ASCII",
145 %%% keywords = "latex, page grid, main vertical list",
146 %%% supported = "yes",
147 %%% abstract = "aip substyle for REVTeX",
148 %%% }
149 %</package>
150 % \fi
151 %
152 % \iffalse ltxdoc klootch
153 % The following references the \file{README} file,
154 % which contains basic information about this package.
155 % The contents of this file are generated when
156 % you typeset the programmer's documentation.
157 % Search on "{filecontents*}{README}" to locate it.
158 % \fi\input{README}%
159 %
160 % \subsection{Bill of Materials}
161 %
162 % Following is a list of the files in this distribution arranged
163 % according to provenance.
164 %
165 % \subsubsection{Primary Source}%
166 % One single file generates all.
167 %\begin{verbatim}
168 %aip.dtx
169 %\end{verbatim}
170 %
171 % \subsubsection{Generated by \texttt{latex aip.dtx}}%
172 % Typesetting the source file under \LaTeX\
173 % generates the readme and the installer.
174 %\begin{verbatim}
175 %README aip.ins
176 %\end{verbatim}
177 %
178 % \subsubsection{Generated by \texttt{tex aip.dtx}}%
179 % Typesetting the installer generates
180 % the package files.
181 %\begin{verbatim}
182 %aip.rtx
183 %\end{verbatim}
184 %
185 % \subsubsection{Documentation}%
186 % The following are the online documentation:
187 % \begin{verbatim}
188 %aip.pdf
189 % \end{verbatim}
190 %
191 % \subsubsection{Auxiliary}%
192 % The following are auxiliary files generated
193 % in the course of running \LaTeX:
194 % \begin{verbatim}
195 %aip.aux aip.idx aip.ind aip.log aip.toc
196 % \end{verbatim}
197 %
198 % \section{Code common to all modules}%
199 %
200 % The following may look a bit klootchy, but we
201 % want to require only one place in this file
202 % where the version number is stated,
203 % and we also want to ensure that the version
204 % number is embedded into every generated file.
205 %
206 % Now we declare that
207 % these files can only be used with \LaTeXe.
208 % An appropriate message is displayed if
209 % a different \TeX{} format is used.
210 % \begin{macrocode}
211 %<*driver|package>
212 \NeedsTeXFormat{LaTeX2e}[1996/12/01]%
213 %</driver|package>
214 % \end{macrocode}
215 % As desired, the following modules all
216 % take common version information:
217 % \begin{macrocode}
218 %<package>\ProvidesFile{aip4-1.rtx}%
219 %<*driver>
220 \expandafter\ProvidesFile\expandafter{\jobname.dtx}%
221 %</driver>
222 % \end{macrocode}
223 %
224 % The following line contains, for once and for all,
225 % the version and date information.
226 % By various means, this information is reproduced
227 % consistently in all generated files and in the
228 % typeset documentation.
229 % \begin{macrocode}
230 %<*driver|package>
231 %<version>
232 [2020/09/30 4.1s AIP substyle for REVTeX]% \fileversion
233 %</driver|package>
234 % \end{macrocode}
235 %
236 %
237 % \section{The driver module \texttt{driver}}
238 %
239 % This module, consisting of the present section,
240 % typesets the programmer's documentation,
241 % generating the \file{.ins} installer and \file{README} as required.
242 %
243 % Because the only uncommented-out lines of code at the beginning of
244 % this file constitute the \file{driver} module itself,
245 % we can simply typeset the \file{.dtx} file directly,
246 % and there is thus rarely any need to
247 % generate the ``driver'' {\sc docstrip} module.
248 % Module delimiters are nonetheless required so that
249 % this code does not find its way into the other modules.
250 %
251 % The \enve{document} command concludes the typesetting run.
252 %
253 % \begin{macrocode}
254 %<*driver>
255 % \end{macrocode}
256 %
257 % \subsection{The Preamble}
258 % The programmers documentation is formatted
259 % with the \classname{ltxdoc} class with local customizations,
260 % and with the usual code line indexing.
261 % \begin{macrocode}
262 \documentclass{ltxdoc}
263 \RequirePackage{ltxdocext}%
264 \let\url\undefined
265 \RequirePackage[colorlinks=true,linkcolor=blue]{hyperref}%
266 \expandafter\ifx\csname package@font\endcsname\relax\else
267 \expandafter\expandafter
268 \expandafter\RequirePackage
269 \expandafter\expandafter
270 \expandafter{\csname package@font\endcsname}%
271 \fi
272 \gdef\lquote{`}\gdef\rquote{'}%
273 \CodelineIndex\EnableCrossrefs % makeindex -s gind.ist aip
274 \RecordChanges % makeindex -s gglo.ist -o aip.gls aip.glo
275 % \end{macrocode}
276 %
277 % \subsubsection{Docstrip and info directives}
278 % We use so many {\sc docstrip} modules that we set the
279 % \texttt{StandardModuleDepth} counter to 1.
280 % \begin{macrocode}
281 \setcounter{StandardModuleDepth}{1}
282 % \end{macrocode}
283 % The following command retrieves the date and version information
284 % from this file.
285 % \begin{macrocode}
286 \expandafter\GetFileInfo\expandafter{\jobname.dtx}%
287 % \end{macrocode}
288 %
289 % \subsection{The ``Read Me'' File}
290 % As promised above, here is the contents of the
291 % ``Read Me'' file. That file serves a double purpose,
292 % since it also constitutes the beginining of the
293 % programmer's documentation. What better thing, after
294 % all, to have appear at the beginning of the
295 % typeset documentation?
296 %
297 % A good discussion of how to write a ReadMe file can be found in
298 % Engst, Tonya, ``Writing a ReadMe File? Read This''
299 % \emph{MacTech} October 1998, p. 58.
300 %
301 % Note the appearance of the
302 % \cmd\StopEventually\ command, which marks the
303 % dividing line between the user documentation
304 % and the programmer documentation.
305 %
306 % The usual user will not be asked to
307 % do a full build, not to speak
308 % of the bootstrap.
309 % Instructions for carrying these processes
310 % begin the programmer's manual.
311 %
312 %\changes{4.1b}{2008/08/06}{Beta candidate b}
313 % \begin{macrocode}
314 \begin{filecontents*}[overwrite]{README}
315 \title{%
316 The \classname{aip} substyle for REV\TeX%
317 \protect\thanks{%
318 \fileversion\ \copyright 2009 American Institute of Physics
319 % For version number and date,
320 % search on "\fileversion" in the .dtx file,
321 % or see the end of the README file.
322 }%
323 }%
324
325 \author{%
326 Arthur Ogawa\thanks{mailto:arthur\_ogawa at sbcglobal.net}%
327 }%
328 \date{Version \fileversion, dated \filedate}%
329 \maketitle
330
331 This file embodies the implementation of the
332 AIP journal substyles for APS's \revtex\ 4.1 document class
333 for electronic submissions to AIP journals.
334
335 The distribution point for this work is
336 \url{http://authors.aip.org/REVTEX}.
337 The archive contains ready-to-Install files, documentation, and full source.
338
339 This package is also distributed via CTAN:
340 \url{http://www.ctan.org/pub/tex-archive/macros/latex/contrib/aip}, and as a ready-to-install image as
341 \url{http://www.ctan.org/pub/tex-archive/install/macros/latex/contrib/aip.tds.zip}.
342
343 The \classname{aip} package was commissioned by the American Institute of Physics
344 and is distributed under the terms of the \LaTeX\ Project Public License,
345 the same license under which all the portions of \LaTeX\ itself is distributed.
346 Please see \url{http://ctan.tug.org/macros/latex/base/lppl.txt} for details.
347
348 To use this document class, you must have a working
349 \TeX\ installation equipped with \LaTeXe\
350 and possibly pdftex and Adobe Acrobat Reader or equivalent.
351
352 To install, retrieve the distribution,
353 unpack it into a directory on the target computer,
354 and move the file \file{aip.rtx}
355 into a location in your filesystem where it will be found by \LaTeX.
356
357 To use, read the user documentation \file{auguide.pdf}.
358
359 \tableofcontents
360
361 \section{Overview}%
362 \revtex\ is a \LaTeXe\ document class, somewhat like a hybrid of
363 the standard \LaTeX\ \classname{book} and \classname{article} classes.
364
365 This document class implements the AIP society and journal substyles:
366 the journals represent a set of mutually exclusive class options that, in this case, allow the
367 document class to address multiple journals within the AIP family.
368 This society is obtained with class option \classoption{aip}.
369
370 \section{Processing Instructions}
371
372 The package file \file{aip.rtx}
373 is generated from this file, \file{aip.dtx},
374 using the {\sc docstrip} facility of \LaTeX
375 via |tex aip.dtx|.
376 The typeset documentation that you are now reading is generated from
377 the same file by typesetting it with \LaTeX\ or pdftex
378 via |latex aip.dtx| or |pdflatex aip.dtx|.
379
380 \subsection{Build Instructions}
381
382 You may bootstrap this suite of files solely from \file{aip.dtx}.
383 Prepare by installing \LaTeXe\ (and either tex or pdftex) on your computer,
384 then carry out the following steps:
385 \begin{enumerate}
386 \item
387 Within an otherwise empty directory,
388 typeset \file{aip.dtx} with \LaTeX\ or pdflatex;
389 you will obtain the typeset documentation you are now reading,
390 along with
391 the installer \file{aip.ins},
392 and the file \file{README}.
393
394 Note: you will have to run \LaTeX\ twice, then \file{makeindex}, then
395 \LaTeX\ again in order to obtain a valid index and table of contents.
396 \item
397 Now typeset \file{aip.dtx} with \TeX (not \LaTeX),
398 thereby generating the package file \file{aip.rtx}.
399 \item
400 Install \classname{aip.rtx}
401 by moving it to a location
402 in your filesystem where it will be found by \LaTeX,
403 like \file{tex/latex/aip}.
404 \item
405 Install \classname{aip.pdf}
406 by moving it to
407 \file{doc/latex/aip}.
408 \item
409 Using the \file{.dbj} information herein,
410 generate the needed \file{.bst} files and install them in
411 \file{bibtex/bst/aip}.
412 \end{enumerate}
413 \end{filecontents*}
414 % \end{macrocode}
415 %
416 % \subsection{The Document Body}
417 %
418 % Here is the document body, containing only a
419 % \cmd\DocInput\ directive---referring to this very file.
420 % This very cute self-reference is a common \classname{ltxdoc} idiom.
421 % \begin{macrocode}
422 \begin{document}%
423 \newcommand\revtex{REV\TeX}%
424 \expandafter\DocInput\expandafter{\jobname.dtx}%
425 % ^^A\PrintChanges
426 \end{document}
427 % \end{macrocode}
428 %
429 % \begin{macrocode}
430 %</driver>
431 % \end{macrocode}
432 %
433 % \section{AIP: A set of journal-specifc extensions to \revtex}
434 %
435 % To create a journal substyle, you create
436 % a \file{.rtx} file, in our case \file{aip.rtx}.
437 % Within that file, you override procedures and parameter assignments as you see fit.
438 % Ideally they will be generally applicable to all of that society's
439 % journals (see the file \file{aps.rtx} for a realization of this scheme).
440 % Also within that file, you include a
441 % section of code for each journal, that for JMP looks like:
442 % \begin{verbatim}
443 % \@ifx{\@journal\journal@jmp}{%
444 % <code specific to the JMP>
445 % }{}%
446 % \end{verbatim}
447 %
448 % \section{The \classoption{aip} class option: the \texttt{aip} module}
449 % The file \file{aip.rtx} is read in by the \classname{revtex4} document class
450 % if \cmd\@society\ has the value \classoption{aip}.
451 %
452 % Here, code specific to AIP journals appears.
453 %
454 % We first give some text entities (amounting to journal abbreviations),
455 % then some AIP-specific initialisations,
456 % then code for particular AIP journals.
457 % In the latter case, the choice is
458 % keyed off the macro \cmd\@journal.
459 %
460 % Note on \cmd\AtEndOfClass:
461 % this file, like all journal substyles, is read in at \cmd\AtEndOfClass\ time,
462 % so you should not use this command in this file.
463 % Note for \LaTeX\ developers: It would be an improvement in \LaTeX\ to
464 % \cmd\let\cmd\AtEndOfClass\ to something like \cmd\@firstofone.
465 % This change would be effected in \cmd\@onefilewithoptions.
466 %
467 % \begin{macrocode}
468 %<*package>
469 % \end{macrocode}
470 %
471 % \subsection{Defend Against Forseeable Errors}%
472 % Protect this file from being read in by anything but \revtex.
473 % \begin{macrocode}
474 \ifx\undefined\substyle@ext
475 \def\@tempa{%
476 \endinput
477 \GenericWarning{I must be read in by REVTeX! (Bailing out)}%
478 }%
479 \expandafter\else
480 \def\@tempa{}%
481 \expandafter\fi\@tempa
482 \class@info{RevTeX society AIP selected}%
483 % \end{macrocode}
484 %
485 % \subsection{Substyle Options}%
486 %
487 % Here are the class options relating to the AIP:
488 % \begin{macrocode}
489 \DeclareOption{jcp}{\change@journal{jcp}}%
490 \DeclareOption{pop}{\change@journal{pop}}%
491 \DeclareOption{rsi}{\change@journal{rsi}}%
492 \DeclareOption{jap}{\change@journal{jap}}%
493 \DeclareOption{apl}{\change@journal{apl}}%
494 \DeclareOption{cha}{\change@journal{cha}}%
495 \DeclareOption{pof}{\change@journal{pof}}%
496 \DeclareOption{bmf}{\change@journal{bmf}}%
497 \DeclareOption{rse}{\change@journal{rse}}%
498 \DeclareOption{jmp}{\change@journal{jmp}}%
499 % \end{macrocode}
500 %
501 % Option allowing for ``numerical author-year'' bibliography.
502 % \begin{macrocode}
503 \DeclareOption{author-numerical}{%
504 \@booleantrue\authoryear@sw
505 \@booleantrue\authornum@sw
506 }%
507 % \end{macrocode}
508 %
509 % Optionally allow article title in bibliography entries.
510 % A new switch is defined here: \cmd\aip@jtitx@sw\ signifies that
511 % the numbered style bibliography is to be prepared without article titles in @ARTICLE entries.
512 % Otherwise, such titles are incorporated if present in the \file{.bib} entry.
513 % By default, exclude the article titles.
514 % \begin{macrocode}
515 \DeclareOption{article-title}{%
516 \@booleanfalse\aip@jtitx@sw
517 }%
518 \@booleantrue \aip@jtitx@sw
519 % \end{macrocode}
520 %
521 % Establish default options for this society.
522 %
523 % \begin{macrocode}
524 \@booleanfalse\authoryear@sw
525 \@booleanfalse\authornum@sw
526 % \end{macrocode}
527 %
528 % \begin{macro}{\@bibdataout@init}
529 % \begin{macro}{\@bibdataout@aip}
530 % \changes{4.1o}{2010/02/12}{(AO, 580) Control .bst at run time.}%
531 % Procedure \cmd\@bibdataout@aip\ has the job of writing the control record into the
532 % job's \cmd\jobname\filename{.bib} file, where it will adjust the options to \filename{.bst} processing.
533 % It is installed into the initialization procedure \cmd\@bibdataout@init, and its meaning
534 % is set by the society (AIP) and journal.
535 %
536 % \begin{macrocode}
537 \appdef\@bibdataout@rev{\@bibdataout@aip}%
538 \def\@bibdataout@aip{%
539 \immediate\write\@bibdataout{%
540 % \end{macrocode}
541 % An entry that controls processing of the \filename{.bst} file has entry type \texttt{@CONTROL}.
542 % \begin{macrocode}
543 @CONTROL{%
544 aip41Control%
545 % \end{macrocode}
546 % Say whether we want long bibliography style (the default), or the abbreviated style.
547 % \begin{macrocode}
548 \longbibliography@sw{\true@sw}{\aip@jtitx@sw{\false@sw}{\true@sw}}%
549 {%
550 ,pages="1",title="0"%
551 }{%
552 ,pages="0",title=""%
553 }%
554 }%
555 }%
556 % \end{macrocode}
557 % Place a \cmd\citation\ into the auxiliary file corresponding to this entry.
558 % \begin{macrocode}
559 \if@filesw
560 \immediate\write\@auxout{\string\citation{aip41Control}}%
561 \fi
562 }%
563 % \end{macrocode}
564 % \end{macro}
565 % \end{macro}
566 %
567 % For AIP, the preprint style \classoption{preprint} is the default.
568 % \begin{macrocode}
569 \@booleantrue\preprintsty@sw
570 % \end{macrocode}
571 %
572 % \begin{macro}{\showPACS@sw}
573 % \begin{macro}{\showKEYS@sw}
574 % If \cmd\showPACS@sw\ is true, print the PACS information in the title block,
575 % otherwise not.
576 % Similarly for \cmd\showKEYS@sw\ and the keywords.
577 % \begin{macrocode}
578 \@booleantrue\showPACS@sw
579 \@booleantrue\showKEYS@sw
580 % \end{macrocode}
581 % \end{macro}
582 % \end{macro}
583 %
584 % \begin{macro}{\refname}
585 %
586 % In reprint style only, we eliminate the head above the bibliography.
587 % \begin{macrocode}
588 \appdef\setup@hook{%
589 \preprintsty@sw{}{%
590 \let\refname\@empty
591 }%
592 }%
593 % \end{macrocode}
594 % \end{macro}
595 %
596 % \subsection{AIP Setup}%
597 % Here we define the default procedures for AIP journals.
598 % Individual AIP journals may override these definitions.
599 %
600 % \subsubsection{Running header and footer}%
601 %
602 % Page style for all AIP journals.
603 % We assert our own page style only if nobody else has done so.
604 % Users wishing to customize their documents will be able to invoke a \cmd\pagestyle\
605 % command anywhere in the preamble.
606 %FIXME: \cmd\preprintsty@sw\ is defined?
607 % \begin{macrocode}
608 \appdef\setup@hook{%
609 \preprintsty@sw{%
610 \ps@preprint
611 }{%
612 \ps@article
613 }%
614 }%
615 % \end{macrocode}
616 %
617 % The spc says: ``Running title must be provided on title page'',
618 % and that journal classes 1b and 2 have no running title.
619 % \begin{macrocode}
620 \def\ps@preprint{%
621 \def\@oddhead{\@runningtitle\hfil}%
622 \def\@evenhead{\@runningtitle\hfil}%
623 \def\@oddfoot{\hfil\thepage\quad\checkindate\hfil}%
624 \def\@evenfoot{\hfil\thepage\quad\checkindate\hfil}%
625 \let\@mkboth\@gobbletwo
626 \let\sectionmark\@gobble
627 \let\subsectionmark\@gobble
628 }%
629 \def\ps@article{%
630 \def\@evenhead{\let\\\heading@cr\thepage\quad\checkindate\hfil\@runningtitle}%
631 \def\@oddhead{\let\\\heading@cr\@runningtitle\hfil\checkindate\quad\thepage}%
632 \def\@oddfoot{}%
633 \def\@evenfoot{}%
634 \let\@mkboth\@gobbletwo
635 \let\sectionmark\@gobble
636 \let\subsectionmark\@gobble
637 }%
638 \def\@runningtitle{\@shorttitle}%
639 % \end{macrocode}
640 %
641 % \subsubsection{Title block}%
642 %
643 % The specifics of the title block.
644 % Apply to all AIP journals; individual journals may override these settings.
645 %
646 % \begin{macro}{\titlepage}
647 % \begin{macrocode}
648 \renewenvironment{titlepage}{%
649 \let\wastwocol@sw\twocolumn@sw
650 \onecolumngrid
651 \newpage
652 \thispagestyle{titlepage}%
653 \c@page\z@% article sets this to one not zero???
654 }{%
655 \wastwocol@sw{\twocolumngrid}{\newpage}%
656 }%
657 % \end{macrocode}
658 % \end{macro}
659 %
660 % \begin{macro}{\@fnsymbol}
661 % On the title page, footnotes are lettered with right parenthesis: ``a)''.
662 % \begin{macrocode}
663 \let\@fnsymbol@latex\@fnsymbol
664 \let\@fnsymbol\@alph
665 % \end{macrocode}
666 % \end{macro}
667 %
668 % \begin{macro}{\adjust@abstractwidth}
669 % This procedure is used by many titlepage elements to indent on the left by a particular
670 % amount. The author list uses \cmd\frontmatter@authorformat\ to accomplish the same.
671 % \begin{macrocode}
672 \def\adjust@abstractwidth{%
673 \parindent1em\relax
674 \advance\leftskip.5in\relax
675 \@totalleftmargin\leftskip
676 \@afterheading\@afterindentfalse
677 }%
678 % \end{macrocode}
679 % \end{macro}
680 %
681 % \begin{macro}{\frontmatter@abstractheading}
682 % AIP Journals all set the abstract head the same way, with no head.
683 % \begin{macrocode}
684 \def\frontmatter@abstractheading{}%
685 % \end{macrocode}
686 % \end{macro}
687 %
688 % \begin{macro}{\frontmatter@abstractfont}
689 % All AIP journals set the abstract body the same way.
690 % \begin{macrocode}
691 \def\frontmatter@abstractfont{%
692 %\small
693 \adjust@abstractwidth
694 }%
695 % \end{macrocode}
696 % \end{macro}
697 %
698 % All AIP journal preprints use separate titlepage and full-width abstract.
699 % \begin{macrocode}
700 \appdef\setup@hook{%
701 \preprintsty@sw{%
702 \@booleantrue\titlepage@sw
703 % \def\frontmatter@affiliationfont{\it}%
704 \let\section\section@preprintsty
705 % \let\@hangfrom@section\@hangfrom@section@preprintsty
706 \let\subsection\subsection@preprintsty
707 \let\subsubsection\subsubsection@preprintsty
708 }{}%
709 }%
710 % \end{macrocode}
711 %
712 % \begin{macro}{\frontmatter@authorformat}
713 % All AIP journals set the author list the same.
714 % The leading is 11.5 points, and
715 % there is 11.5 points of extra space above the first author line
716 % (which amounts to the same thing as 11.5 points extra below the title)
717 % for a total of 23 points base-to-base.
718 %
719 % \begin{macrocode}
720 \def\frontmatter@@indent{%
721 \skip@\@flushglue
722 \@flushglue\z@ plus.3\hsize\relax
723 \raggedright
724 \advance\leftskip.5in\relax
725 \@totalleftmargin\leftskip
726 \@flushglue\skip@
727 }%
728 \def\frontmatter@authorformat{%
729 \frontmatter@@indent
730 \sffamily
731 %\advance\baselineskip\p@
732 %\parskip11.5\p@\relax
733 }%
734 \renewcommand*\email[1][Electronic mail: ]{\begingroup\sanitize@url\@email{#1}}%
735 % \end{macrocode}
736 % \end{macro}
737 %
738 % \begin{macro}{\frontmatter@above@affilgroup}
739 % The default amount of space above affiliation.
740 % \begin{macrocode}
741 \def\frontmatter@above@affilgroup{%
742 }%
743 % \end{macrocode}
744 % \end{macro}
745 %
746 % \begin{macro}{\frontmatter@above@affiliation}
747 % \begin{macro}{\frontmatter@above@affiliation@script}
748 % The default amount of space above affiliation.
749 % \begin{macrocode}
750 \def\frontmatter@above@affiliation@script{%
751 \frontmatter@@indent
752 %\addvspace{3.5\p@}%
753 }%
754 \def\frontmatter@above@affiliation{%
755 }%
756 % \end{macrocode}
757 % \end{macro}
758 % \end{macro}
759 %
760 % \begin{macro}{\frontmatter@affiliationfont}
761 % All AIP journals set the affiliation the same.
762 % Like the author, but in italic.
763 % \begin{macrocode}
764 \def\frontmatter@affiliationfont{%
765 \frontmatter@@indent
766 \preprintsty@sw{}{\small}%
767 \it
768 }%
769 % \end{macrocode}
770 % \end{macro}
771 %
772 % \begin{macro}{\frontmatter@collaboration@above}
773 % \begin{macrocode}
774 \def\frontmatter@collaboration@above{%
775 }%
776 % \end{macrocode}
777 % \end{macro}
778 %
779 % Set up the default AIP style for title block authors and affiliations.
780 %
781 % \begin{macro}{\frontmatter@setup}
782 % All AIP journals set the title page using the same font and size.
783 % However, justification varies for the title block elements, so
784 % we assert none here.
785 % \begin{macrocode}
786 \def\frontmatter@setup{%
787 \normalfont
788 }%
789 % \end{macrocode}
790 % \end{macro}
791 %
792 % \begin{macro}{\frontmatter@title@above}
793 % \begin{macro}{\frontmatter@title@format}
794 % \begin{macro}{\frontmatter@title@below}
795 % All AIP journals set the article title 12 point Times Roman, bold, flush left.
796 %
797 % \begin{macrocode}
798 \def\frontmatter@title@above{\addvspace{6\p@}}%
799 \def\frontmatter@title@format{%
800 \preprintsty@sw{}{\Large}%
801 \sffamily
802 \bfseries
803 \raggedright
804 \parskip\z@skip
805 }%
806 \def\frontmatter@title@below{\addvspace{3\p@}}%
807 % \end{macrocode}
808 % \end{macro}
809 % \end{macro}
810 % \end{macro}
811 %
812 % \begin{macro}{\frontmatter@makefnmark}
813 % All AIP journals share this procedure for setting the titlepage footnote text:
814 % superior lowercase letter, with right parenthesis.
815 % \begin{macrocode}
816 \def\@author@parskip{3\p@}%
817 \@booleantrue\altaffilletter@sw
818 \def\frontmatter@makefnmark{%
819 \@textsuperscript{%
820 \normalfont\@thefnmark%(
821 )%
822 }%
823 }%
824 \def\frontmatter@authorbelow{%
825 \addvspace{3\p@}%
826 }%
827 % \end{macrocode}
828 % \end{macro}
829 %
830 % \begin{macro}{\affil@cutoff}
831 % We override \cmd\affil@cutoff\ to enforce the rule that,
832 % if a single affiliation appears on the title page, then
833 % no affiliation superscript at all is produced.
834 % \begin{macrocode}
835 \let\affil@cutoff\tw@
836 % \end{macrocode}
837 % De awa.
838 % \end{macro}
839 %
840 % \begin{macro}{\frontmatter@RRAP@format}
841 % All AIP journals use the same format for the ``Received, Revised, etc.'' block on the title page.
842 %
843 % Change note: 11.5 points b-b from author/affiliation down to date.
844 % \begin{macrocode}
845 \def\frontmatter@RRAP@format{%
846 \addvspace{5\p@}%
847 \small
848 \raggedright
849 \advance\leftskip.5in\relax
850 \@totalleftmargin\leftskip
851 % \preprintsty@sw{}{\parskip.5ex\relax}%
852 \everypar{%
853 \hbox\bgroup(\@gobble@leavemode@uppercase%)
854 }%
855 \def\par{%
856 \@ifvmode{}{%(
857 \unskip)\egroup\@@par
858 }%
859 }%
860 }%
861 \def\punct@RRAP{;\egroup\ \hbox\bgroup}%
862 \def\@gobble@leavemode@uppercase#1#2{\expandafter\MakeTextUppercase}%
863 % \end{macrocode}
864 % \end{macro}
865 %
866 % \begin{macro}{\frontmatter@PACS@format}
867 %
868 % \begin{macrocode}
869 \def\frontmatter@PACS@format{%
870 \addvspace{11\p@}%
871 % \footnotesize
872 \adjust@abstractwidth
873 \parskip\z@skip
874 \samepage
875 }%
876 % \end{macrocode}
877 % \end{macro}
878 %
879 % \begin{macro}{\frontmatter@keys@format}
880 %
881 % \begin{macrocode}
882 \def\frontmatter@keys@format{%
883 % \footnotesize
884 \adjust@abstractwidth
885 \samepage
886 }%
887 % \end{macrocode}
888 % \end{macro}
889 %
890 % \begin{macro}{\ps@titlepage}
891 % Title page style. Currently empty except for preprint header,
892 % which consists of all the \cmd\preprint\ arguments,
893 % stacked flush right at the right margin.
894 % \begin{macrocode}
895 \def\ps@titlepage{%
896 \def\@oddhead{%
897 \@runningtitle
898 \hfill
899 \produce@preprints\@preprint
900 }%
901 \let\@evenhead\@oddhead
902 \def\@oddfoot{%
903 \hb@xt@\z@{\byrevtex\hss}%
904 \hfil
905 \preprintsty@sw{\thepage}{}%
906 \quad\checkindate
907 \hfil
908 }%
909 \let\@evenfoot\@oddfoot
910 }%
911 \def\byrevtex{\byrevtex@sw{Typeset by REV\TeX and AIP}{}}%
912 % \end{macrocode}
913 % \end{macro}
914 %
915 % \begin{macro}{\produce@preprints}
916 % \begin{macrocode}
917 \def\produce@preprints#1{%
918 \preprint@sw{%
919 \vtop to \z@{%
920 \def\baselinestretch{1}%
921 \small
922 \let\preprint\preprint@count
923 \count@\z@#1\@ifnum{\count@>\tw@}{%
924 \hbox{%
925 \let\preprint\preprint@hlist
926 #1\setbox\z@\lastbox
927 }%
928 }{%
929 \let\preprint\preprint@cr
930 \halign{\hfil##\cr#1\crcr}%
931 \par
932 \vss
933 }%
934 }%
935 }{}%
936 }%
937 \def\preprint@cr#1{#1\cr}%
938 \def\preprint@count#1{\advance\count@\@ne}%
939 \def\preprint@hlist#1{#1\hbox{, }}%
940 % \end{macrocode}
941 % \end{macro}
942 %
943 % \subsubsection{Lead-in paragraph}%
944 %
945 % The \env{Lead-in paragraph} environment formats the AIP ``lead paragraph''.
946 % To avoid introducing new syntax, we take over the \env{quotation} environment
947 % until the first \cmd\section\ (or other sectioning command) appears.
948 %
949 % \begin{macrocode}
950 \newenvironment{Lead@inParagraph}{%
951 \par
952 \bfseries
953 \@afterheading\@afterindentfalse
954 }{%
955 \par
956 \hb@xt@\hsize{\hfil\leaders\hrule\hfil\leaders\hrule\hfil\hfil}%
957 }%
958 % \end{macrocode}
959 % At the beginning of the document temporarily change the meaning of
960 % the \env{quotation} environment, restoring it once the first sectioning
961 % command is given.
962 % \begin{macrocode}
963 \appdef\frontmatter@init{%
964 \let@environment{quotation@ltx}{quotation}%
965 \let@environment{quotation}{Lead@inParagraph}%
966 }%
967 \appdef\@startsection@hook{%
968 \let@environment{quotation}{quotation@ltx}%
969 }%
970 % \end{macrocode}
971 %
972 % \subsubsection{Stacked Heads}%
973 % All AIP journals put a period (.), followed by quad space, after the section number.
974 % Also, no hanging section number.
975 % \begin{macrocode}
976 \def\@seccntformat#1{\csname the#1\endcsname.\quad}%
977 \def\@hang@from#1#2#3{#1#2#3}%
978 % \end{macrocode}
979 %
980 % Note that in the following, we wish to set the section head uppercase, so we use
981 % David Carlisle's \cmd\MakeTextUppercase. However, because this procedure effectively
982 % parses its argument (looking for things to \emph{not} translate), it has to be invoked
983 % in such a way that the argument of the \cmd\section\ command is passed to it as its
984 % own argument.
985 %
986 % To accomplish this, we use the \cmd\@hangfrom@\ hook, which was developed for this
987 % purpose.
988 %
989 % \begin{macrocode}
990 \def\section{%
991 \@startsection
992 {section}%
993 {1}%
994 {\z@}%
995 {0.8cm \@plus1ex \@minus .2ex}%
996 {0.5cm}%
997 {%
998 \normalfont
999 \small
1000 \sffamily
1001 \bfseries
1002 \raggedright
1003 }%
1004 }%
1005 \def\@hangfrom@section#1#2#3{\@hangfrom{#1#2}\MakeTextUppercase{#3}}%
1006 \def\@hangfroms@section#1#2{#1\MakeTextUppercase{#2}}%
1007 % \end{macrocode}
1008 %
1009 % See, e.g., BMF\_044101\_1 (1) or BMF\_044103\_1 (1)
1010 % \begin{macrocode}
1011 \def\subsection{%
1012 \@startsection
1013 {subsection}%
1014 {2}%
1015 {\z@}%
1016 {.8cm \@plus1ex \@minus .2ex}%
1017 {.5cm}%
1018 {%
1019 \normalfont
1020 \small
1021 \sffamily
1022 \bfseries
1023 \raggedright
1024 }%
1025 }%
1026 % \end{macrocode}
1027 %
1028 % See, e.g., BMF\_044104\_1 (1), JMP\_123520\_1 (48),
1029 % \begin{macrocode}
1030 \def\subsubsection{%
1031 \@startsection
1032 {subsubsection}%
1033 {3}%
1034 {\z@}%
1035 {.8cm \@plus1ex \@minus .2ex}%
1036 {.5cm}%
1037 {%
1038 \normalfont
1039 \small
1040 \sffamily
1041 \bfseries
1042 \itshape
1043 \raggedright
1044 }%
1045 }%
1046 % \end{macrocode}
1047 %
1048 % \subsubsection{Runin Heads}%
1049 % \begin{macrocode}
1050 \def\paragraph{%
1051 \@startsection
1052 {paragraph}%
1053 {4}%
1054 {\parindent}%
1055 {\z@}%
1056 {-1em}%
1057 {\normalfont\normalsize\itshape}%
1058 }%
1059 % \end{macrocode}
1060 %
1061 % \begin{macrocode}
1062 \def\subparagraph{%
1063 \@startsection
1064 {subparagraph}%
1065 {5}%
1066 {\parindent}%
1067 {3.25ex \@plus1ex \@minus .2ex}%
1068 {-1em}%
1069 {\normalfont\normalsize\bfseries}%
1070 }%
1071 % \end{macrocode}
1072 %
1073 % \begin{macro}{\section@preprintsty}
1074 % \begin{macro}{\subsection@preprintsty}
1075 % \begin{macro}{\subsubsection@preprintsty}
1076 % Here are the formatting procedures specific to the preprint style;
1077 % the only difference is that the heads are flush left instead of centered.
1078 %
1079 % \begin{macrocode}
1080 \def\section@preprintsty{%
1081 \@startsection
1082 {section}%
1083 {1}%
1084 {\z@}%
1085 {0.8cm \@plus1ex \@minus .2ex}%
1086 {0.5cm}%
1087 {%
1088 \normalfont
1089 \bfseries
1090 \raggedright
1091 }%
1092 }%
1093 %\def\@hangfrom@section@preprintsty#1#2#3{\@hangfrom{#1#2}\MakeTextUppercase{#3}}%
1094 % \end{macrocode}
1095 % \begin{macrocode}
1096 \def\subsection@preprintsty{%
1097 \@startsection
1098 {subsection}%
1099 {2}%
1100 {\z@}%
1101 {.8cm \@plus1ex \@minus .2ex}%
1102 {.5cm}%
1103 {%
1104 \normalfont
1105 \bfseries
1106 \raggedright
1107 }%
1108 }%
1109 % \end{macrocode}
1110 % \begin{macrocode}
1111 \def\subsubsection@preprintsty{%
1112 \@startsection
1113 {subsubsection}%
1114 {3}%
1115 {\z@}%
1116 {.8cm \@plus1ex \@minus .2ex}%
1117 {.5cm}%
1118 {%
1119 \normalfont
1120 % \small
1121 \itshape\bfseries
1122 \raggedright
1123 }%
1124 }%
1125 % \end{macrocode}
1126 % \end{macro}
1127 % \end{macro}
1128 % \end{macro}
1129 %
1130 % For examples of
1131 % \env{theorem}, \env{proposition}, \env{lemma}, \env{remark}, \env{corollary}, \env{example},
1132 % and \env{proof} (with optional title),
1133 % using independent numbering for each class,
1134 % and with numbered and roman lists therein,
1135 % see JMP\_122901\_1 (48).
1136 %
1137 % For theorems, etc, numbered by section, (and with theorems in the appendix)
1138 % but equations numbered throughout,
1139 % see JMP\_123301\_1 (48).
1140 %
1141 % For a (roman) list in text, theorem, and proof,
1142 % see JMP\_123514\_1 (48).
1143 %
1144 % For numbered list in text,
1145 % and equations numbered by section,
1146 % see JMP\_123518\_1 (48).
1147 %
1148 % All AIP journals use frontmatter footnotes by default.
1149 % \begin{macrocode}
1150 \let\frontmatter@footnote@produce\frontmatter@footnote@produce@footnote
1151 % \end{macrocode}
1152 %
1153 %
1154 % \subsubsection{Table of Contents}%
1155 % The toc will itself make an entry in the toc,
1156 % but we temporarily turn off toc formatting for the duration.
1157 % \begin{macrocode}
1158 \def\@pnumwidth{1.55em}
1159 \def\@tocrmarg {2.55em}
1160 \def\@dotsep{2}
1161 \def\ltxu@dotsep{4.5pt}
1162 \setcounter{tocdepth}{3}
1163 % \end{macrocode}
1164 %
1165 % \begin{macrocode}
1166 \def\tableofcontents{%
1167 \addtocontents{toc}{\string\tocdepth@munge}%
1168 \print@toc{toc}%
1169 \addtocontents{toc}{\string\tocdepth@restore}%
1170 }%
1171 % \end{macrocode}
1172 %
1173 % \begin{macrocode}
1174 \def\tocdepth@munge{%
1175 \let\l@section@saved\l@section
1176 \let\l@section\@gobble@tw@
1177 }%
1178 \def\@gobble@tw@#1#2{}%
1179 % \end{macrocode}
1180 %
1181 % \begin{macrocode}
1182 \def\tocdepth@restore{%
1183 \let\l@section\l@section@saved
1184 }%
1185 % \end{macrocode}
1186 %
1187 % \begin{macrocode}
1188 \def\l@part#1#2{\addpenalty{\@secpenalty}%
1189 \begingroup
1190 \set@tocdim@pagenum{#2}%
1191 % \@tempdima 3em %
1192 \parindent \z@
1193 \rightskip\tocleft@pagenum plus 1fil\relax
1194 \skip@\parfillskip\parfillskip\z@
1195 \addvspace{2.25em plus\p@}%
1196 \large \bf %
1197 \leavevmode\ignorespaces#1\unskip\nobreak\hskip\skip@
1198 \hb@xt@\rightskip{\hfil\unhbox\z@}\hskip-\rightskip\hskip\z@skip
1199 \par
1200 \nobreak %
1201 \endgroup
1202 }%
1203 % \end{macrocode}
1204 %
1205 % \begin{macro}{\l@section}
1206 % Determine which TOC elements are automatically indented.
1207 % \begin{macrocode}
1208 \def\tocleft@{\z@}%
1209 \def\tocdim@min{5\p@}%
1210 \def\l@section{%
1211 \l@@sections{}{section}% Implicit #3#4
1212 }%
1213 \def\l@f@section{%
1214 \addpenalty{\@secpenalty}%
1215 \addvspace{1.0em plus\p@}%
1216 \bf
1217 }%
1218 \def\l@subsection{%
1219 \l@@sections{section}{subsection}% Implicit #3#4
1220 }%
1221 \def\l@subsubsection{%
1222 \l@@sections{subsection}{subsubsection}% Implicit #3#4
1223 }%
1224 \def\l@paragraph#1#2{}%
1225 \def\l@subparagraph#1#2{}%
1226 % \end{macrocode}
1227 % \end{macro}
1228 %
1229 % Activate the auto TOC processing.
1230 % \begin{macrocode}
1231 \let\toc@pre\toc@pre@auto
1232 \let\toc@post\toc@post@auto
1233 % \end{macrocode}
1234 %
1235 % \begin{macrocode}
1236 \def\listoffigures{\print@toc{lof}}%
1237 \def\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
1238 % \end{macrocode}
1239 %
1240 % \begin{macrocode}
1241 \def\listoftables{\print@toc{lot}}%
1242 \let\l@table\l@figure
1243 % \end{macrocode}
1244 %
1245 % \subsubsection{Default column bottom}%
1246 % All AIP journal styles have flush bottoms.
1247 %
1248 % \begin{macrocode}
1249 \@booleanfalse\raggedcolumn@sw
1250 % \end{macrocode}
1251 %
1252 %
1253 % \subsubsection{Table alignment style}%
1254 %
1255 % \begin{macro}{\tableft@skip@float}
1256 % \begin{macro}{\tabmid@skip@float}
1257 % \begin{macro}{\tabright@skip@float}
1258 % \begin{macro}{\array@row@pre@float}
1259 % \begin{macro}{\array@row@pst@float}
1260 % All AIP publications have the same table specification:
1261 % Scotch rules above and below, centered in column.
1262 % \begin{macrocode}
1263 \def\tableft@skip@float{\z@ plus\hsize}%
1264 \def\tabmid@skip@float{\@flushglue}%
1265 \def\tabright@skip@float{\z@ plus\hsize}%
1266 \def\array@row@pre@float{\hline\hline\noalign{\vskip\doublerulesep}}%
1267 \def\array@row@pst@float{\noalign{\vskip\doublerulesep}\hline\hline}%
1268 % \end{macrocode}
1269 % \end{macro}
1270 % \end{macro}
1271 % \end{macro}
1272 % \end{macro}
1273 % \end{macro}
1274 %
1275 %
1276 % \subsubsection{Footnote formatting}%
1277 % We customize the formatting of footnotes for all AIP journals.
1278 % \begin{macro}{\@makefntext}
1279 % \begin{macrocode}
1280 \def\@makefntext#1{%
1281 \def\baselinestretch{1}%
1282 \leftskip1em%
1283 \parindent1em%
1284 \noindent
1285 \nobreak\hskip-\leftskip
1286 \hb@xt@\leftskip{%
1287 \hss\@makefnmark\ %
1288 }%
1289 #1%
1290 \par
1291 }%
1292 % \end{macrocode}
1293 % \end{macro}
1294 %
1295 %
1296 % \subsubsection{Appendix}%
1297 % \begin{macro}{\appendix}
1298 % \begin{macro}{\@hangfrom@appendix}
1299 % \begin{macro}{\@hangfroms@appendix}
1300 % \begin{macro}{\@appendixcntformat}
1301 % \begin{macrocode}
1302 \prepdef\appendix{%
1303 \par
1304 \let\@hangfrom@section\@hangfrom@appendix
1305 %\let\@hangfroms@section\@hangfroms@appendix
1306 \let\@sectioncntformat\@appendixcntformat
1307 }%
1308 \def\@hangfrom@appendix#1#2#3{%
1309 #1%
1310 \@if@empty{#2}{%
1311 #3%
1312 }{%
1313 #2\@if@empty{#3}{}{:\ #3}%
1314 }%
1315 }%
1316 \def\@hangfroms@appendix#1#2{%
1317 #1#2%
1318 }%
1319 \def\@appendixcntformat#1{\appendixname\ \csname the#1\endcsname}%
1320 % \end{macrocode}
1321 % \end{macro}
1322 % \end{macro}
1323 % \end{macro}
1324 % \end{macro}
1325 %
1326 % \subsubsection{Bibliography}%
1327 %
1328 % Customize the \revtex\ for the AIP society.
1329 % this task requires three components:
1330 % the \BibTeX\ \file{aipnum.bst} and \file{aipauth.bst} style files,
1331 % customizing code for \file{natbib}, and
1332 % customizations of the \env{thebibliography} environment.
1333 %
1334 % \begin{macro}{\@bibstyle}
1335 % Define the argument of the \cmd\bibliographystyle\ command.
1336 % The user must have installed a \file{.bst} file of the corresponding name.
1337 % This file will then be used by \BibTeX\ when compiling the document's \file{.bbl} file.
1338 %
1339 % The default bibliography style for the AIP journal substyles are \file{aipnum.bst} and \file{aipauth.bst}.
1340 % To generate them, use \classname{custom-bib} version 4.21 or later.
1341 % Run the \file{.bst} generator, \file{makebst.tex}, and
1342 % accept all defaults, with the following exceptions:
1343 %
1344 % \begin{enumerate}
1345 % \item
1346 % ORDERING OF REFERENCES: c: seq-no (references in order of Citation);
1347 % \item
1348 % AUTHOR NAMES: i: nm-init,ed-au (Initials + surname);
1349 % \item
1350 % NUMBER OF AUTHORS: l: max 12, min 12 (there will be three prompts total);
1351 % \item
1352 % TYPEFACE FOR AUTHORS IN LIST OF REFERENCES: u: nmft,nmft-def (User defined author font);
1353 % \item
1354 % FONT FOR FIRST NAMES: u: fnm-def (First names in user defined font);
1355 % \item
1356 % EDITOR NAMES IN INCOLLECTION ETC: a: nmfted (Editors incollection like authors);
1357 % \item
1358 % DATE FORMAT: p: yr-par (Date in parentheses);
1359 % \item
1360 % SUPPRESS MONTH: x: xmth (Date is year only);
1361 % \item
1362 % TITLE OF ARTICLE: i: tit-it (Title italic)
1363 % \item
1364 % ARTICLE TITLE PRESENT: x: jtit-x (No article title);
1365 % \item
1366 % JOURNAL NAME FONT: r: jttl-rm (Journal title normal);
1367 % \item
1368 % TECHNICAL REPORT TITLE: b: trtit-b (Tech. report title like books);
1369 % \item
1370 % JOURNAL VOLUME: b: vol-bf (Volume bold);
1371 % \item
1372 % VOLUME PUNCTUATION: c: volp-com (Volume with comma);
1373 % \item
1374 % PAGE NUMBERS: f: jpg-1 (Only start page number);
1375 % \item
1376 % JOURNAL NAME PUNCTUATION: x: jnm-x (Space after journal);
1377 % \item
1378 % PUBLISHER IN PARENTHESES: d: pub-date (Publisher and date in parentheses);
1379 % \item
1380 % PUBLISHER POSITION: p: pre-pub (Publisher before chapter, pages);
1381 % \item
1382 % ISBN NUMBER: isbn: (Include ISBN for books, booklets)
1383 % \item
1384 % ISSN NUMBER: issn: (Include ISSN for periodicals)
1385 % \item
1386 % EDITOR IN COLLECTIONS: b: edby (Booktitle, edited by \dots);
1387 % \item
1388 % PUNCTUATION BETWEEN SECTIONS (BLOCKS): c: blk-com (Comma between blocks);
1389 % \item
1390 % ABBREVIATE WORD `PAGES': a: pp (`Page' abbreviated);
1391 % \item
1392 % ABBREVIATE WORD `EDITORS': a: ed (`Editor' abbreviated);
1393 % \item
1394 % OTHER ABBREVIATIONS: a: abr (Abbreviations);
1395 % \item
1396 % ABBREVIATION FOR `EDITION': a: ednx (`Edition' abbreviated as `ed');
1397 % \item
1398 % EDITION NUMBERS: n: ord (Numerical editions);
1399 % \item
1400 % STORED JOURNAL NAMES: a: jabr (Abbreviated journal names);
1401 % \item
1402 % FONT OF `ET AL': i: etal-it (Italic et al);
1403 % \item
1404 % ADDITIONAL REVTeX DATA FIELDS: r: revdata, eprint, url, url-blk (Include REVTeX data fields collaboration, eid, eprint, numpages, url)
1405 % \item
1406 % NEW FONT SELECTION SCHEME: n: nfss (NFSS);
1407 % \item
1408 % ADDITIONAL REVTeX DATA FIELDS: y: revdata (additional data fields);
1409 % \item
1410 % REFERENCE COMPONENT TAGS: y: reference component tags;
1411 % \item
1412 % URL ADDRESS: n: URL as note;
1413 % \end{enumerate}
1414 %
1415 % A file \file{aipnum.dbj} file equivalent to the following should result:
1416 % \begin{verbatim}
1417 %\input docstrip
1418 %\preamble
1419 %----------------------------------------
1420 %*** REVTeX-compatible aipnum4-1.bst 2009-10-08 ***
1421 %\endpreamble
1422 %\postamble
1423 %End of customized bst file
1424 %\endpostamble
1425 %\keepsilent
1426 %\askforoverwritefalse
1427 %\def\MBopts{\from{merlin.mbs}{%
1428 % head,\MBopta}
1429 %\from{physjour.mbs}{\MBopta}
1430 %\from{geojour.mbs}{\MBopta}
1431 %\from{photjour.mbs}{\MBopta}
1432 %\from{merlin.mbs}{tail,\MBopta}}
1433 %\def\MBopta{%
1434 % lang,%: Use language field to switch hyphenation patterns for title
1435 % pres,pres-bf,%: Presentation, speaker bold face
1436 % seq-no,%: Citation order (unsorted, like unsrt.bst)
1437 % vonx,%: Sort without von part (de la Maire after Mahone)
1438 % nm-init,ed-au,%: Initials + surname (J. F. Smith)
1439 % nmft,nmft-def,%: User defined author font (\bibnamefont)
1440 % fnm-def,%: First names in user defined font (\bibfnamefont)
1441 % nmfted,%: Editors incollection like authors font
1442 % nmand-rm,%: `And' in normal font (JONES and JAMES)
1443 % lab,lab-def,%: User defined citation font (\citenamefont)
1444 % and-rm,%: Cited `and' in normal font
1445 % yr-par,%: Date in parentheses as (May 1993)
1446 % date-nil-x,%: If date is empty, then do not produce the surrounding punctuation (parens, brackets, colon, comma)
1447 % tit-qq,%: Title and punctuation in double quotes (``Title,'' ..)
1448 % inproceedings-chapter,%: produce pages after chapter, just as in InBook
1449 % jtit-x,%: Title is ignored
1450 % inproceedings-chapter,%: produce pages after chapter just as in InBook
1451 % article-booktitle,%: format booktitle
1452 % article-series,%: article can has series
1453 % jttl-rm,%: Journal name normal font
1454 % journal-address,%: Include address field (in parentheses) along with journal name
1455 % book-bt,%: Field `booktitle', or if absent field `title', is book title
1456 % thesis-title-o,%: Title is optional: no warning issued if empty
1457 % techreport-institution-par,%: format tech report institution like book publisher
1458 % vol-bf,%: Volume bold as {\bf vol}(num)
1459 % vnum-x,%: Journal vol, without number as 34
1460 % volp-com,%: Volume with comma as vol(num), ppp
1461 % jpg-1,%: Only start page number
1462 % book-editor-booktitle,%: Book permits empty author, produces title before editor in this case
1463 % inbook-editor-booktitle,%: Allow using both title/booktitle, both author/editor
1464 % bookaddress,%: Italic booktitle followed by bookaddress in roman
1465 % num-xser,%: Allows number without series and suppresses word "number"
1466 % number-cap,%: Capitalize word `number' as: "Number 123"
1467 % chapter-cap,%: Capitalize word `chapter' as: `Chapter 42'
1468 % series-number,%: Series number as: `Springer Lecture Notes No. 125'
1469 % numser-booktitle,%: After book title and conference address, and before editors
1470 % ser-vol,%: Series, vol. 23
1471 % ser-rm,%: format series roman , even when used with volume
1472 % volume-cap,%: Capitalize word `volume', as: `Volume 7 in Lecture Series'
1473 % ser-ed,%: Series and volume after booktitle and before editors
1474 % jnm-x,%: Space after journal name
1475 % pg-bk,book-chapter-pages,%: As chapter and page: chapter 42, page 345
1476 % pub-date,%: Publisher with address and date in parentheses (Oxford, 1994)
1477 % ay-empty-pub-parens-x,%: eliminate parentheses altogether if nothing inside
1478 % pre-pub,%: Publisher before volume, chapter, pages
1479 % pre-edn,%: Edition before publisher
1480 % pre-pub,pre-edn,%: Edition, publisher, volume, chapter, pages
1481 % isbn,%: Include ISBN for books, booklets, etc.
1482 % issn,%: Include ISSN for periodicals
1483 % doi-link,doi,%: Doi forms a link to the publication, anchored to the volume or title
1484 % edby,%: In booktitle, edited by .. (where .. is names)
1485 % blk-com,%: Comma between blocks
1486 % fin-endbibitem,%: Command at end instead of period
1487 % pp,%: `Page' abbreviated as p. or pp.
1488 % ed,%: `Editor' abbreviated as ed. or eds.
1489 % abr,%: Abbreviations of such words
1490 % ednx,%: `Edition' abbreviated as `ed'
1491 % ord,%: Numerical editions as 1st, 2nd, 3rd, etc
1492 % jabr,%: Abbreviated journal names
1493 % etal-it,%: Italic et al
1494 % revdata,eprint,url,url-blk,translation,%: Include REVTeX data fields collaboration, eid, eprint, archive, url, translation
1495 % SLACcitation,%: Produce SLACcitation field
1496 % numpages-x,%: Do not include numpages field
1497 % url,url-prefix-x,%: URL without prefix (default: `URL ')
1498 % bibinfo,%: Reference component tags like \bibinfo in the content of \bibitem
1499 % bibfield,%: Element tags like \bibfield in the content of \bibitem
1500 % nfss,%: Use LaTeX commands which may not work with Plain TeX
1501 %,{%
1502 % }}
1503 %\generate{\file{aipnum4-1.bst}{\MBopts}}
1504 %\endbatchfile
1505 % \end{verbatim}
1506 %
1507 % Between the two files \file{aipnum.dbj} and \file{aipauth.dbj},
1508 % the differences are limited:
1509 % \file{aipnum.dbj} has two lines lacking in \file{aipauth.dbj}:
1510 % \begin{verbatim}
1511 % seq-no,%: Citation order (unsorted, like unsrt.bst)
1512 % nm-init,ed-au,%: Initials + surname (J. F. Smith)
1513 % \end{verbatim}
1514 % thus, the ``numbered citation'' bibliography is sorted by citation order, and
1515 % the names are give first inital, then last name.
1516 %
1517 % Likewise, \file{aipauth.dbj} has one line lacking in \file{aipnum.dbj}:
1518 % \begin{verbatim}
1519 % nm-rev,%: Surname + comma + initials (Smith, J. F.)
1520 % \end{verbatim}
1521 % Thus, the ``author-year'' bibliography is sorted by author name, and
1522 % names are given last name first, followed by initials.
1523 %
1524 % We ensure that the journal substyle has the first word
1525 % in the matter by installing the (default) AIP code
1526 % later on (see Section~\ref{sec:aip-defaults}).
1527 % \end{macro}
1528 %
1529 % \begin{macro}{\pre@bibdata}
1530 %
1531 % Set up to write endnotes to a .bib file; its data will be incorporated into the bibliography.
1532 % \begin{macrocode}
1533 \def\pre@bibdata{\jobname\bibdata@app}%
1534 % \end{macrocode}
1535 % \end{macro}
1536 %
1537 % \begin{macro}{\bibsection}
1538 % We define the sectioning command to use when starting the bibliography
1539 % (we use \cmd\refname).
1540 % \begin{macrocode}
1541 \def\refname{References}%
1542 \def\rtx@bibsection{%
1543 \@ifx@empty\refname{%
1544 \par\vspace{6\p@ plus 6\p@}%
1545 }{%
1546 % \end{macrocode}
1547 % The following line has been commented out:
1548 % \begin{verbatim}
1549 % \let\@hangfroms@section\@hang@froms
1550 % \end{verbatim}
1551 % \begin{macrocode}
1552 \expandafter\section\expandafter*\expandafter{\refname}%
1553 \@nobreaktrue
1554 }%
1555 }%
1556 % \end{macrocode}
1557 % \end{macro}
1558 %
1559 % \begin{macro}{\bibpreamble}
1560 % \begin{macro}{\bibsep}
1561 % \begin{macro}{\newblock}
1562 % \begin{macrocode}
1563 \let\bibpreamble\@empty
1564 \appdef\setup@hook{%
1565 \bibsep\z@\relax
1566 }%
1567 \def\newblock{\ }%
1568 % \end{macrocode}
1569 % \end{macro}
1570 % \end{macro}
1571 % \end{macro}
1572 %
1573 % \begin{macro}{\bibfont}
1574 % We define the font switch that applies to the body of the bibliography.
1575 %
1576 % \begin{macrocode}
1577 \appdef\setup@hook{%
1578 \def\bibfont{%
1579 \preprintsty@sw{}{\footnotesize}%
1580 \@clubpenalty\clubpenalty
1581 \labelsep\z@
1582 }%
1583 }%
1584 \let\place@bibnumber\place@bibnumber@sup
1585 % \end{macrocode}
1586 % \end{macro}
1587 %
1588 %
1589 % \subsubsection{Index}%
1590 % \begin{macrocode}
1591 \newenvironment{theindex}{%
1592 \columnseprule \z@
1593 \columnsep 35\p@
1594 \c@secnumdepth-\maxdimen
1595 \onecolumngrid@push
1596 \section{\indexname}%
1597 \thispagestyle{plain}%
1598 \parindent\z@
1599 \parskip\z@ plus.3\p@\relax
1600 \let\item\@idxitem
1601 \onecolumngrid@pop
1602 }{%
1603 }%
1604 %
1605 \def\@idxitem{\par\hangindent 40\p@}
1606 %
1607 \def\subitem{\par\hangindent 40\p@ \hspace*{20\p@}}
1608 %
1609 \def\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}}
1610 %
1611 \def\indexspace{\par \vskip 10\p@ plus5\p@ minus3\p@\relax}
1612 % \end{macrocode}
1613 %
1614 %
1615 % \subsubsection{Typesize Processing}%
1616 % The formatting specification for the preprint option is:
1617 % Times Roman 12 pt, double spacing, with 1-inch margins on letter paper.
1618 % Paragraphs indented ``five spaces''.
1619 % Display math on standard indent, with equation number flush right in parenthesis, with subequations roman.
1620 %
1621 % That for reprint option is to format similar to the printed journal; with most journals
1622 % set (approximately analyzed) 10-point, 2-column grid, letter paper.
1623 % \begin{macrocode}
1624 \expandafter\def\csname rtx@aip10pt\endcsname{%
1625 \let\@currname@class\@currname
1626 \def\@currname{aps10pt\substyle@post}%
1627 \class@info{Reading file \@currname.\substyle@ext}%
1628 \input{\@currname.\substyle@ext}%
1629 \let\@currname\@currname@class
1630 \class@info{Overriding 10pt}%
1631 \aipreprint
1632 }%
1633 \expandafter\def\csname rtx@aip11pt\endcsname{\csname rtx@aip12pt\endcsname}%
1634 \expandafter\def\csname rtx@aip12pt\endcsname{%
1635 \let\@currname@class\@currname
1636 \def\@currname{aps12pt\substyle@post}%
1637 \class@info{Reading file \@currname.\substyle@ext}%
1638 \input{\@currname.\substyle@ext}%
1639 \let\@currname\@currname@class
1640 \class@info{Overriding 12pt}%
1641 \aippreprint
1642 }%
1643 % \end{macrocode}
1644 %
1645 % \begin{macro}{\today}
1646 % Procedure \cmd\today\ is used in the article class, but not in
1647 % this document class.
1648 % \begin{macrocode}
1649 \def\today{%
1650 \number\day\space
1651 \ifcase\month
1652 \or January\or February\or March\or April\or May\or June%
1653 \or July\or August\or September\or October\or November\or December%
1654 \fi\space
1655 \number\year
1656 }%
1657 % \end{macrocode}
1658 % \end{macro}
1659 %
1660 % \subsection{A. Running Title}
1661 % User-provided running title \cmd\@shorttitle\ to be set.
1662 %
1663 % \subsection{B. Equation numbering, figure and table numbering}
1664 % Equations can be numbered throughout, or by section, with appendix equations prepended by the appendix label.
1665 % Figures and tables are numbered throughout.
1666 %
1667 %
1668 % \subsection{C. Title}
1669 % Title page may break above abstract, within author list.
1670 % Title notes are signified by superior letter followed by right parenthesis.
1671 %
1672 % \subsection{D. Author footnote}
1673 % Set short line above these footnotes.
1674 %
1675 % \subsection{E. Author}
1676 % Class option \classoption{superscriptaddress} is standard.
1677 % \begin{macrocode}
1678 \clo@superscriptaddress
1679 % \end{macrocode}
1680 %
1681 % \subsection{F. Affiliations}
1682 % Set italic.
1683 %
1684 % \subsection{G. Received date}
1685 %
1686 %
1687 % \subsection{H. Abstract}
1688 % Single paragraph, no indent.
1689 %
1690 % \subsection{J. Lead Paragraph}
1691 % Set boldface, flush left before main text, single paragraph.
1692 % Separated from text by a short centered rule.
1693 %
1694 % \subsection{K. Headings}
1695 % Use labels: ROMAN, LETTER, arabic, letter.
1696 % Set ALLCAPS, boldface; Initial cap, boldface; Initial cap, bold-italic; Initial cap, italic.
1697 %
1698 % Theorem, proof title followed by colon. Follow author.
1699 %
1700 % \subsection{L. Text Footnotes}
1701 % Not permitted; use endnotes.
1702 %
1703 % \subsection{M. Citations and Bibliography}
1704 % Numerical \filename{aipnum.bst}, author-year \filename{aipauth.bst}, and numbered author-year \filename{aipnumauth.bst} are the available choices.
1705 % Numerical is standard, with all styles permitted in journal classes 3a and 4b.
1706 %
1707 %
1708 % \subsection{N. References}
1709 %
1710 % Article Title usage:
1711 %
1712 % Article title required in all journals with "unpublished", "to be published", "in press" and "submitted" refs.
1713 %
1714 % Exceptions:
1715 %
1716 % Journal classes 1a,1b,2,4a:
1717 %
1718 % Article title not allowed in published references, except in the case of "in press" or submitted" (see sample references below).
1719 %
1720 % Journal class 3a:
1721 %
1722 % Article title allowed but not required in author-year references (use must be consistent within a single manuscript).
1723 %
1724 % Journal class 3b:
1725 %
1726 % Article title required in all journal references and report references.
1727 %
1728 % Journal class 4b:
1729 %
1730 % Article title allowed in journal references in author-year mode.
1731 %
1732 % \subsection{O. Examples of Numerical References}
1733 %
1734 %
1735 % \subsection{P. References in Author-year mode}
1736 %
1737 %
1738 % \subsection{Q. Numbered Author-year References}
1739 %
1740 %
1741 % \subsection{R. Tables}
1742 % Placed within text (floated), labeled with Roman numeral.
1743 %
1744 % Table caption placed above table, followed by space,
1745 % two double lines, space, table column headings, space,
1746 % single line, table contents, two double lines.
1747 %
1748 % Footnotes labeled with superior lower-case letter, set below table contents.
1749 %
1750 % \subsection{S. Figures}
1751 % Placed within text (floated), labeled with arabic numbers.
1752 %
1753 % Caption set below figure. A citation to be set inline, not superscripted.
1754 %
1755 % \subsection{Society defaults}%
1756 %
1757 % After this society file is read in, we will process the
1758 % \cmd\@journal- and \cmd\@pointsize-specific code.
1759 % Here we define the defaults.
1760 %
1761 % We select \textbf{Chaos} as the default journal substyle, because it is
1762 % the most permissive in terms of bibliography and citation style,
1763 % and it is formatted in two column in the reprint style.
1764 %
1765 % \begin{macrocode}
1766 \def\@journal@default{cha}%
1767 \def\@pointsize@default{12}%
1768 % \end{macrocode}
1769 %
1770 % \subsection{Journal-Specific Code}%
1771 %
1772 % For AIP journals, we supply code specific to JCP, POP, RSI, JAP, APL, CHA, POF, BMF, RSE, JMP.
1773 %
1774 % \subsubsection{\classoption{jcp}}%
1775 %A member of the journal class 1a.
1776 % \begin{macrocode}
1777 \def\rtx@aipjcp{%
1778 \typeout{Using journal substyle \@journal.}%
1779 % \end{macrocode}
1780 % Journal class 1a uses the (superscript) numerical citation style by default.
1781 % \begin{macrocode}
1782 \@booleanfalse\authoryear@sw
1783 % \end{macrocode}
1784 %
1785 % End of \classoption{jcp} code.
1786 % \begin{macrocode}
1787 }%
1788 % \end{macrocode}
1789 %
1790 % \subsubsection{\classoption{pop}}%
1791 %A member of the journal class 1a.
1792 % \begin{macrocode}
1793 \def\rtx@aippop{%
1794 \typeout{Using journal substyle \@journal.}%
1795 % \end{macrocode}
1796 % Journal class 1a uses the (superscript) numerical citation style by default.
1797 % \begin{macrocode}
1798 \@booleanfalse\authoryear@sw
1799 % \end{macrocode}
1800 %
1801 % End of \classoption{pop} code.
1802 % \begin{macrocode}
1803 }%
1804 % \end{macrocode}
1805 %
1806 % \subsubsection{\classoption{rsi}}%
1807 %A member of the journal class 1a.
1808 % \begin{macrocode}
1809 \def\rtx@aiprsi{%
1810 \typeout{Using journal substyle \@journal.}%
1811 % \end{macrocode}
1812 % Journal class 1a uses the (superscript) numerical citation style by default.
1813 % \begin{macrocode}
1814 \@booleanfalse\authoryear@sw
1815 % \end{macrocode}
1816 %
1817 % End of \classoption{rsi} code.
1818 % \begin{macrocode}
1819 }%
1820 % \end{macrocode}
1821 %
1822 % \subsubsection{\classoption{jap}}%
1823 %Sole member of the journal class 1b.
1824 %
1825 % No running title.
1826 % \begin{macrocode}
1827 \def\rtx@aipjap{%
1828 \typeout{Using journal substyle \@journal.}%
1829 % \end{macrocode}
1830 % Journal class 1b uses the (superscript) numerical citation style by default.
1831 % \begin{macrocode}
1832 \@booleanfalse\authoryear@sw
1833 \let\@runningtitle\@empty
1834 % \end{macrocode}
1835 %
1836 % End of \classoption{jap} code.
1837 % \begin{macrocode}
1838 }%
1839 % \end{macrocode}
1840 %
1841 % \subsubsection{\classoption{apl}}%
1842 %Sole member of the journal class 2.
1843 %
1844 % No running title.
1845 % \begin{macrocode}
1846 \def\rtx@aipapl{%
1847 \typeout{Using journal substyle \@journal.}%
1848 % \end{macrocode}
1849 % Journal class 2 uses the (superscript) numerical citation style by default.
1850 % \begin{macrocode}
1851 \@booleanfalse\authoryear@sw
1852 \let\@runningtitle\@empty
1853 % \end{macrocode}
1854 %
1855 % End of \classoption{apl} code.
1856 % \begin{macrocode}
1857 }%
1858 % \end{macrocode}
1859 %
1860 % \subsubsection{\classoption{cha}}%
1861 %Sole member of the journal class 3a.
1862 % \begin{macrocode}
1863 \def\rtx@aipcha{%
1864 \typeout{Using journal substyle \@journal.}%
1865 % \end{macrocode}
1866 % Article titles are allowed.
1867 % \begin{macrocode}
1868 \@booleanfalse\aip@jtitx@sw
1869 % \end{macrocode}
1870 %
1871 % End of \classoption{cha} code.
1872 % \begin{macrocode}
1873 }%
1874 % \end{macrocode}
1875 %
1876 % \subsubsection{\classoption{pof}}%
1877 %Sole member of the journal class 3b.
1878 % \begin{macrocode}
1879 \def\rtx@aippof{%
1880 \typeout{Using journal substyle \@journal.}%
1881 % \end{macrocode}
1882 % Journal class 3b uses the (superscript) numerical citation style by default.
1883 % Article titles are required, so we include them if available,
1884 % but if absent, we can do no more than make a warning in the \file{.blg}.
1885 % \begin{macrocode}
1886 \@booleanfalse\authoryear@sw
1887 \@booleanfalse\aip@jtitx@sw
1888 % \end{macrocode}
1889 %
1890 % End of \classoption{pof} code.
1891 % \begin{macrocode}
1892 }%
1893 % \end{macrocode}
1894 %
1895 % \subsubsection{\classoption{bmf}}%
1896 % A member of the journal class 4a,
1897 % the Biomicrofluidics journal is single column.
1898 % \begin{macrocode}
1899 \def\rtx@aipbmf{%
1900 \typeout{Using journal substyle \@journal.}%
1901 % \end{macrocode}
1902 % Journal class 4a uses the (superscript) numerical citation style by default.
1903 % Journal is formatted in a single column.
1904 % \begin{macrocode}
1905 \@booleanfalse\authoryear@sw
1906 \@booleanfalse\twocolumn@sw
1907 % \end{macrocode}
1908 %
1909 % End of \classoption{bmf} code.
1910 % \begin{macrocode}
1911 }%
1912 % \end{macrocode}
1913 %
1914 % \subsubsection{\classoption{rse}}%
1915 %A member of the journal class 4a.
1916 % \begin{macrocode}
1917 \def\rtx@aiprse{%
1918 \typeout{Using journal substyle \@journal.}%
1919 % \end{macrocode}
1920 % Journal class 4a uses the (superscript) numerical citation style by default.
1921 % \begin{macrocode}
1922 \@booleanfalse\authoryear@sw
1923 % \end{macrocode}
1924 %
1925 % End of \classoption{rse} code.
1926 % \begin{macrocode}
1927 }%
1928 % \end{macrocode}
1929 %
1930 % \subsubsection{\classoption{jmp}}%
1931 % Sole member of the journal class 4b, Journal of Mathematical Physics is single column.
1932 % For an example of \env{itemize}, see JMP\_122901\_1 (48).
1933 % \begin{macrocode}
1934 \def\rtx@aipjmp{%
1935 \typeout{Using journal substyle \@journal.}%
1936 % \end{macrocode}
1937 % Article titles are allowed.
1938 % Journal is formatted in a single column.
1939 % \begin{macrocode}
1940 \@booleanfalse\aip@jtitx@sw
1941 \@booleanfalse\twocolumn@sw
1942 % \end{macrocode}
1943 %
1944 % End of \classoption{jmp} code.
1945 % \begin{macrocode}
1946 }%
1947 % \end{macrocode}
1948 %
1949 % \subsection{Establish AIP Defaults\label{sec:aip-defaults}}
1950 %
1951 % \begin{macro}{\footinbib@sw}
1952 % All AIP journals invoke the \classoption{footinbib} option.
1953 % \begin{macrocode}
1954 \@booleantrue\footinbib@sw
1955 % \end{macrocode}
1956 % \end{macro}
1957 %
1958 % \begin{macro}{\place@bibnumber}
1959 % \begin{macro}{\@bibstyle}
1960 % \begin{macro}{\bibpunct}
1961 % We install code that will
1962 % govern the style in which \cmd\cite\ commands are
1963 % formatted,
1964 % select the presentation for \cmd\bibitem s
1965 % and control the \BibTeX\ processing.
1966 %
1967 % Note that a journal substyle may override these settings.
1968 % Likewise, document preamble may itself invoke \cmd\bibpunct\ or \cmd\bibliographystyle,
1969 % thereby overriding these settings and those of the journal substyle.
1970 %
1971 % The numbered citations of \file{aipnum} and \file{aipauthnum}
1972 % are compatible with \classoption{footinbib} and
1973 % the compression and coalescing features of \classname{natbib},
1974 % while \file{aipauth}'s author-year citations are not.
1975 % Therefore, we de-select such options if we are selecting author-year citations.
1976 %
1977 % Note on \classname{natbib} presets:
1978 % \file{aipnum} and \file{aipauthnum} uses the Chicago \cmd\bibpunct\ style;
1979 % while \file{aipauth} uses that of Nature.
1980 %
1981 % Note on \cmd\NAT@mcite: if not using numerical citations, we set \cmd\NAT@mcite\
1982 % to a lower value, to turn off the mcite semantics of \classname{natbib}.
1983 % \begin{macrocode}
1984 \let\place@bibnumber\place@bibnumber@sup
1985 \appdef\setup@hook{%
1986 \authoryear@sw{%
1987 \aip@jtitx@sw{%
1988 \def\@bibstyle{aipauth\substyle@post}%
1989 }{%
1990 \def\@bibstyle{aipauth\substyle@post}%
1991 }%
1992 \authornum@sw{%
1993 \bibpunct{}{}{,}{s}{}{\textsuperscript{,}}%
1994 \let\onlinecite\rev@citealpnum
1995 }{%
1996 \bibhang10\p@
1997 \bibpunct{(%)
1998 }{%(
1999 )}{; }{a}{,}{,}%
2000 \@booleanfalse\footinbib@sw
2001 \let\NAT@mcite\@ne
2002 \let\NAT@sort\z@
2003 \def\NAT@cmprs{\z@}%
2004 \let\NAT@def@citea\rtx@def@citea
2005 \let\NAT@def@citea@close\rtx@def@citea@close
2006 }%
2007 }{%
2008 \aip@jtitx@sw{%
2009 \def\@bibstyle{aipnum\substyle@post}%
2010 }{%
2011 \def\@bibstyle{aipnum\substyle@post}%
2012 }%
2013 \bibpunct{}{}{,}{s}{}{\textsuperscript{,}}%
2014 \let\onlinecite\rev@citealpnum
2015 }%
2016 }%
2017 \def\make@footnote@endnote{%
2018 \footinbib@sw{%
2019 \authoryear@sw{\authornum@sw{\false@sw}{\true@sw}}{\false@sw}%
2020 {}{%
2021 \ltx@footnote@push
2022 \def\thempfn{Note\thefootnote}%
2023 \let\ltx@footmark\rev@citemark
2024 \let\ltx@foottext\rev@endtext
2025 \appdef\class@enddocumenthook{\auto@bib}%
2026 \let\printendnotes\relax
2027 }%
2028 }{}%
2029 }%
2030 % \end{macrocode}
2031 % \end{macro}
2032 % \end{macro}
2033 % \end{macro}
2034 %
2035 % \begin{macro}{\aipreprint}%
2036 % We want to override \filename{aps10pt.rtx}.
2037 % \begin{macrocode}
2038 \def\aipreprint{%
2039 }%
2040 % \end{macrocode}
2041 % \end{macro}
2042 %
2043 % \begin{macro}{\aippreprint}%
2044 % We want to override \filename{aps12pt.rtx}.
2045 % \begin{macrocode}
2046 \def\aippreprint{%
2047 }%
2048 % \end{macrocode}
2049 % \end{macro}
2050 %
2051 % \begin{macrocode}
2052 %</package>
2053 % \end{macrocode}
2054 %
2055 % \Finale
2056 % %Here ends the programmer's documentation.
2057 % \endinput
2058 %
2059 \endinput