Debian Codegraph @

texmf-dist/source/latex/resphilosophica/resphilosophica.dtx

raw
1 % \iffalse
2 %<*gobble>
3 %
4 % Copyright 2012-2025, Boris Veytsman <[email protected]>
5 % This work may be distributed and/or modified under the
6 % conditions of the LaTeX Project Public License, either
7 % version 1.3 of this license or (at your option) any
8 % later version.
9 % The latest version of the license is in
10 % http://www.latex-project.org/lppl.txt
11 % and version 1.3 or later is part of all distributions of
12 % LaTeX version 2005/12/01 or later.
13 %
14 % This work has the LPPL maintenance status `maintained'.
15 %
16 % The Current Maintainer of this work is Boris Veytsman
17 %
18 % This work consists of the file resphilosophica.dtx and the
19 % derived file resphilosophica.cls
20 %
21 % \fi
22 % \CheckSum{1411}
23 %
24 %
25 %% \CharacterTable
26 %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
27 %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
28 %% Digits \0\1\2\3\4\5\6\7\8\9
29 %% Exclamation \! Double quote \" Hash (number) \#
30 %% Dollar \$ Percent \% Ampersand \&
31 %% Acute accent \' Left paren \( Right paren \)
32 %% Asterisk \* Plus \+ Comma \,
33 %% Minus \- Point \. Solidus \/
34 %% Colon \: Semicolon \; Less than \<
35 %% Equals \= Greater than \> Question mark \?
36 %% Commercial at \@ Left bracket \[ Backslash \\
37 %% Right bracket \] Circumflex \^ Underscore \_
38 %% Grave accent \` Left brace \{ Vertical bar \|
39 %% Right brace \} Tilde \~}
40 %
41 % \iffalse
42 %
43 %
44 %\section{Identification}
45 %\label{sec:ident}
46 %
47 % We start with the declaration who we are
48 % \begin{macrocode}
49 %</gobble>
50 %<class>\NeedsTeXFormat{LaTeX2e}
51 %<*gobble>
52 \ProvidesFile{resphilosophica.dtx}
53 %</gobble>
54 %<class>\ProvidesClass{resphilosophica}
55 [2025/09/30 v1.39 Typesetting articles for Res Philosophica]
56 %<*gobble>
57 % \end{macrocode}
58 %
59 %
60 % \fi
61 %
62 % \changes{v1.1}{2012/09/01}{Added MT Shadow Imprint code}
63 % \changes{v1.1}{2012/09/01}{Added DOI number}
64 % \changes{v1.4}{2012/09/06}{Added screen option}
65 % \changes{v1.5}{2012/09/07}{Color change for links}
66 % \changes{v1.6}{2012/09/08}{Changed bib style}
67 % \changes{v1.7}{2012/09/11}{Added new bibliography fields}
68 % \changes{v1.8}{2012/09/12}{Added blank last page if the last page is
69 % odd}
70 % \changes{v1.10}{2012/09/19}{Bibliography changes}
71 % \changes{v1.11}{2013/01/08}{Bibliography changes}
72 % \changes{v1.12}{2013/07/13}{Bibliography changes}
73 % \changes{v1.13}{2013/08/14}{New options: preprint and forthcoming}
74 % \changes{v1.13}{2013/08/14}{New command: titlenote}
75 % \changes{v1.15}{2013/09/13}{Added new bibliography command}
76 % \changes{v1.16}{2013/11/26}{Deleted Imprinnt Shadow}
77 % \changes{v1.16}{2013/11/26}{Added documentation about typesetter
78 % changes highlighting}
79 % \changes{v1.17}{2013/12/01}{Added documentation about new editorial
80 % comments}
81 % \changes{v1.17}{2013/12/01}{Bibliography changes:
82 % `inloosecollection' entry}
83 % \changes{v1.24}{2015/01/14}{New command: authornote}
84 % \changes{v1.27}{2015/11/04}{New command: ensquote}
85 % \changes{v1.28}{2015/11/14}{Now ensquote and enquote work correct in
86 % the case of embedded quotations}
87 % \changes{v1.33}{2018/12/23}{Bibliography change: avoid URLs that
88 % duplicate dois}
89 % \changes{v1.36}{2025/05/08}{New bib formatting}
90 % \changes{v1.37}{2025/06/29}{More tweaks to bib formatting}
91 %
92 %\iffalse
93 % \begin{macrocode}
94 \documentclass{ltxdoc}
95 \usepackage{array}
96 \usepackage{url}
97 % Taken from xkeyval.dtx
98 \makeatletter
99 \def\DescribeOption#1{\leavevmode\@bsphack
100 \marginpar{\raggedleft\PrintDescribeOption{#1}}%
101 \SpecialOptionIndex{#1}\@esphack\ignorespaces}
102 \def\PrintDescribeOption#1{\strut\emph{option}\\\MacroFont #1\ }
103 \def\SpecialOptionIndex#1{\@bsphack
104 \index{#1\actualchar{\protect\ttfamily#1}
105 (option)\encapchar usage}%
106 \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
107 usage}\@esphack}
108 \def\DescribeOptions#1{\leavevmode\@bsphack
109 \marginpar{\raggedleft\strut\emph{options}%
110 \@for\@tempa:=#1\do{%
111 \\\strut\MacroFont\@tempa\SpecialOptionIndex\@tempa
112 }}\@esphack\ignorespaces}
113 \makeatother
114 \usepackage{hypdoc}
115 \hypersetup{breaklinks,colorlinks,linkcolor=black,citecolor=black,
116 pagecolor=black,urlcolor=black,hyperindex=false}
117 \PageIndex
118 \CodelineIndex
119 \RecordChanges
120 \EnableCrossrefs
121 \begin{document}
122 \DocInput{resphilosophica.dtx}
123 \end{document}
124 % \end{macrocode}
125 %</gobble>
126 %<*class>
127 % \fi
128 % \MakeShortVerb{|}
129 % \GetFileInfo{resphilosophica.dtx}
130 % \newcommand{\progname}[1]{\textsf{#1}}
131 % \title{Typesetting Articles for \emph{Res
132 % Philosophica}\thanks{\copyright 2012--2025, Boris Veytsman}~\thanks{This
133 % work was commissioned by the Saint Lois University}}
134 % \author{Boris Veytsman\thanks{%
135 % \href{mailto:[email protected]}{\texttt{[email protected]}},
136 % \href{mailto:[email protected]}{\texttt{[email protected]}}}}
137 % \date{\filedate, \fileversion}
138 % \maketitle
139 % \begin{abstract}
140 % This package provides a class for typesetting articles for the
141 % journal \emph{Res Philosophica},
142 % \url{http://www.resphilosophica.org}.
143 % \end{abstract}
144 % \tableofcontents
145 %
146 % \clearpage
147 %
148 %\section{Introduction}
149 %\label{sec:intro}
150 %
151 % According to the statement at \url{http://www.resphilosophica.org/},
152 % \emph{Res Philosophica} is an international, quarterly journal of
153 % philosophy that publishes research in all areas of philosophy,
154 % historical and topical. Founded as \emph{The Modern Schoolman} by
155 % Jesuit Scholastics in 1925, the journal is edited by members of the
156 % Philosophy Department at Saint Louis University and supported
157 % generously by the College of Arts and Sciences.
158 %
159 % This package is intended for the authors and editors of the journal
160 % to typeset the articles in \LaTeX. Note that the journal is typeset
161 % in \emph{Linotype Sabon,}.
162 % The users may buy the fonts and install their free \LaTeX\
163 % support~\cite{Lsabon}, or use the options
164 % |bodyfont=cm| and |rpfont=cm| to typeset the articles using Computer
165 % Modern. Of course, the line and page breaks in the latter case are
166 % different from those in the final version typeset with commercial
167 % fonts.
168 %
169 %\section{User Interface}
170 %\label{sec:interface}
171 %
172 %
173 %\subsection{Commercial Fonts}
174 %\label{sec:prereq}
175 %
176 % The package can be used with free Computer Modern fonts or with
177 % commercial fonts to mimick the journal typesetting. The
178 % installation of additional fonts is therefore fully optional.
179 %
180 % \emph{Res Philosophica} uses Linotype Sabon for the body text
181 % and URW Garamond for
182 % mathematics. Sabon is a commercial font. URW
183 % Garamond is free, but due to license restrictions it is usually not
184 % included with \TeX Live, Mik\TeX\ and other major distributives. If
185 % you bought Linotype Sabon, you need to install the package
186 % |lsabon|~\cite{Lsabon}. To use
187 % URW Garamond, you need to download the |pfb| files from a CTAN
188 % mirror (\url{http://mirror.ctan.org/fonts/urw/garamond/}),
189 % install them in the directory \path{fonts/type1/urw/garamond} under
190 % \path{$TEXMFLOCAL} and run |texhash|.
191 %
192 %\subsection{Invocation and Options}
193 %\label{sec:options}
194 %
195 % To use the class put in the preamble of your document
196 % \begin{flushleft}
197 % |\documentclass[|\meta{options}|]{resphilosophica}|
198 % \end{flushleft}
199 %
200 % The class \progname{resphilosophica} internally loads \progname{amsart},
201 % and therefore all
202 % class options for \progname{amsart} are technically valid. However, most of
203 % them are not especially meaningful for \progname{resphilosophica}.
204 % There are several options specific for this class. They are
205 % described below. Note that the class uses key-value interface for
206 % some options, for example
207 % \begin{verbatim}
208 % \documentclass[bodyfont=sabon]{resphilosophica}
209 % \end{verbatim}
210 %
211 %
212 % \DescribeOption{bodyfont}
213 % The option |bodyfont| can have three values: |sabon| for
214 % Sabon/Garamond fonts, |cm| for Computer Modern and |auto|
215 % (default). The later option switches to the use of Sabon if the
216 % font metrics are present in your system, and to the use of
217 % Computer Modern otherwise.
218 %
219 %
220 % \DescribeOption{manuscript}
221 % The option |manuscript| is intended to faciliate the communications
222 % between the editor and the author. It enables two things:
223 % \begin{enumerate}
224 % \item The numbering of lines in the manuscript is switched off in the
225 % normal mode, but is on in the manuscript mode.
226 % \item The command |\EditorialComment| is no-op in normal mode, but
227 % produces mariginal commentaries in the manuscript
228 % \end{enumerate}
229 %
230 % \DescribeOption{preprint}
231 % The option |preprint| is for the final version of the manuscript.
232 % In this mode there are no editorial comments, but the numbering of
233 % lines is preserved
234 %
235 %
236 %
237 % \DescribeOption{screen}
238 % The option |screen| is intended for the screen reading. When this
239 % option is selected, the links become highlighted.
240 %
241 %
242 % \DescribeOption{forthcoming}
243 % \DescribeMacro{\onlinedate}
244 % The option |forthcoming| is like |screen|, but it is used when there
245 % is no information about the volume. The macro
246 % \cs{onlinedate}\marg{date} can be used to set the date of online
247 % publication.
248 %
249 %
250 %
251 % \DescribeOption{natbib}
252 % The preferred solution for bibliography is |natbib|
253 % package~\cite{Daly07:Natbib}. The option |natbib=true| (default)
254 % sets the package and the proper options, including bibliography
255 % style. The option |natbib=false| switches this behavior off, and the
256 % formatting of the bibliography becomes the full responsibility of
257 % the author. The package includes the Bib\TeX\ bibliography style
258 % |resphilosophica.bst|.
259 %
260 %\subsection{Topmatter}
261 %\label{sec:topmatter}
262 %
263 % Topmatter is the part of the article with the informations about the
264 % authors, their affiliations, the publication data, etc.
265 %
266 % There are two kinds of top matter commands: the ones used primarily
267 % for authors and the ones used primarily for editors. We describe
268 % them separately.
269 %
270 %\subsubsection{Commands for Authors}
271 %\label{sec:authors_commands}
272 %
273 %
274 % \DescribeMacro{\title}
275 % The command |\title|, as in \progname{amsart} class, has two arguments: one
276 % optional, and one mandatory:
277 % \begin{flushleft}
278 % |\title[|\meta{ShortTitle}|]{|\meta{FullTitle}|}|
279 % \end{flushleft}
280 % The mandatory argument is the full title of the article. The
281 % optional argument, if present, defines the shorter version of the
282 % title for running heads. If the optional argument is absent, the
283 % full title is used instead.
284 %
285 % The title is typeset in small caps. The result of the command
286 % \cs{emph} in title depends on whether commercial fonts and the
287 % package \progname{lsabon} package is used: with a relatively recent
288 % version of the package |lsabon| the emphasized text is typeset in
289 % Small Caps Italics.
290 %
291 % \DescribeMacro{\author}
292 % \DescribeMacro{\email}
293 % \DescribeMacro{\address}
294 % \DescribeMacro{\curraddr}
295 % \DescribeMacro{\urladdr}
296 % The interface for specifying the authors
297 % and their affiliations is close the the one of
298 % \progname{amsart}~\cite{instr-l} (and different from the standard \LaTeX).
299 % For each author a separate command |\author| should be used,
300 % followed by |\address| and (optionally) |\curraddr|, |\email| and
301 % |\urladdr|.
302 %
303 % \DescribeMacro{\shortauthors}
304 % In some cases the authors list may be too long for the running head,
305 % even if the abbreviated forms are used for each author. In this
306 % case it is possible to change the running head by a
307 % \emph{redefinition} of the command |\shortauthors|. This
308 % redefinition must be done after all |\author| commands, but before
309 % |\maketitle|:
310 % \begin{verbatim}
311 % \renewcommand{\shortauthors}{A.~Smith et al}
312 % \end{verbatim}
313 %
314 % \DescribeMacro{\thanks}
315 % Like \progname{amsart} (and unlike standard \LaTeX{}),
316 % \progname{resphilosophica} allows |\thanks| only \emph{outside} of
317 % commands |\title| and |\author|. The text of |\thanks| is typeset
318 % at the end of the paper as a footnote marked `Acknowledgments'.
319 % Note that the right vertical positioning of this footnote might
320 % require an additional run of \LaTeX.
321 %
322 % \DescribeMacro{\titlenote}%
323 % The \cs{titlenote}\marg{note} command creates a special footnote for
324 % the title. This command should be issued \emph{outside} the
325 % \cs{title} command.
326 %
327 % \DescribeMacro{\authornote}%
328 % The similar \cs{authornote}\marg{note} command creates a special
329 % footnote for the author. This command should be issued
330 % \emph{outside} the \cs{author} command.
331 %
332 % \DescribeMacro{\copyrightnote}
333 % Normally each paper is copyrighted by the authors and by the
334 % journal. This is reflected in the footnote on the
335 % first page of the article. However, by arrangement with the
336 % editors, certain papers may have different copyright. The command
337 % \cmd{\copyrightnote}\marg{copyright statement}, if issued, changes
338 % the footnote to the corresponding text, for example:
339 % \begin{verbatim}
340 % \copyrightnote{\textcopyright~2012 by the authors. This paper may
341 % be reproduced, in its entirety, for noncommercial purposes.}
342 % \end{verbatim}
343 % Note that if you issue this command, you should explicitly include
344 % both the copyright sign and the year unless the paper does not have
345 % a copyright, for example:
346 % \begin{verbatim}
347 % \copyrightnote{This paper is in the public domain}
348 % \end{verbatim}
349 %
350 % \DescribeMacro{\copyrightyear}
351 % Normally the copyright statement includes the year of copyright,
352 % which is assumed to be the publication year as specified by the
353 % |\publicationyear| command (see below). If this assumption is
354 % wrong, you may correct it, for example,
355 % \begin{verbatim}
356 % \copyrightyear{1998}
357 % \end{verbatim}
358 %
359 %
360 % \DescribeEnv{abstract}
361 % The abstract of the paper must be put between |\begin{abstract}| and
362 % |\end{abstract}|. Unlike the situation in \progname{amsart}
363 % class, abstract may be put \emph{after} |\maketitle|.
364 %
365 % \DescribeMacro{\maketitle}
366 % The macro |\maketitle| typesets the top matter. All top matter
367 % information should be specified before this command.
368 %
369 %\subsubsection{Commands for Editors}
370 %\label{sec:editors_commands}
371 %
372 % The commands described in this section should be used by the editors
373 % to insert the information about the published paper. They must be
374 % put before the |\maketitle| command.
375 %
376 % \DescribeMacro{\volumenumber}
377 % \DescribeMacro{\issuenumber}
378 % \DescribeMacro{\publicationyear}
379 % \DescribeMacro{\publicationmonth}
380 % \DescribeMacro{\papernumber}
381 % \DescribeMacro{\startpage}
382 % \DescribeMacro{\endpage}
383 % The macros |\volumenumber|, |\issuenumber|, |\publicationyear|,
384 % |\publicationmonth|, |\papernumber|, |\startpage|, |\endpage| set up the
385 % corresponding
386 % data for the paper, for example:
387 % \begin{verbatim}
388 % \volumenumber{88}
389 % \issuenumber{1--2}
390 % \publicationyear{2012}
391 % \publicationmonth{January--February}
392 % \papernumber{2}
393 % \startpage{1}
394 % \endpage{39}
395 % \end{verbatim}
396 % Note that if the argument of |\endpage| is empty, \LaTeX{} tries to
397 % calculate the last page number as best as it can.
398 %
399 % Sometimes publication month for double issues is too long to fit on
400 % the back cover. For this case \cs{publicationmonth} has the
401 % optional argument, abbreviated month, for example
402 % \begin{verbatim}
403 % \publicationmonth[Jan--Feb]{January--February}
404 % \end{verbatim}
405 %
406 % \DescribeMacro{\manuscriptid}%
407 % The comman \cs{manuscriptid}\oarg{id} sets the number of the
408 % manuscript assigned at submission. If it is set, it is used to
409 % calculate the doi number (see below).
410 %
411 % \DescribeMacro{\doinumber}%
412 % Normally you do not need to set the DOI of the paper: \TeX{} will
413 % construct the number using the paper data. However, you \emph{may}
414 % override its decision using the command |\doinumber| which sets the
415 % DOI explicitly, for example,
416 % |\doinumber|\marg{10.11612/resphilosophica.2013.01.01}. You
417 % probably should not use this macro.
418 %
419 % \DescribeMacro{\prevpaper}
420 % Instead of setting |\startpage|, one can use the the command
421 % |\prevpaper|\marg{previous paper}, with the argument being the
422 % location and file name of the previous paper in the journal, for example:
423 % \begin{verbatim}
424 % \prevpaper{../infinity/concept_of_infinity}
425 % \end{verbatim}
426 % Note that the |.tex| suffix should \emph{not} be used. The previous
427 % paper must be processed by |latex| prior to the current one. In
428 % this case |latex| will read the last page of the previous paper, and
429 % start the current one from the proper page number.
430 %
431 % \DescribeMacro{\paperUrl}
432 % When a paper is submitted to the Crossref service, which keeps the
433 % database of Digital Object Identifiers, its URL is calculated by
434 % the script used by editors. The command \cs{paperURL}\marg{url}
435 % overrides this choice.
436 %
437 %
438 % \DescribeMacro{\EditorialComment}
439 % The macro |\EditorialComment|\oarg{level}\marg{comments} typesets
440 % the comments
441 % on the margins in the |manuscript| mode, for example,
442 % \begin{verbatim}
443 % Which is a well known fact.\EditorialComment{A citation is
444 % needed}\EditorialComment[1]{Please make the citation more
445 % explicit}.
446 % \end{verbatim}
447 % Editorial comments have \emph{levels.} A level can be numeric or
448 % symbolic; symbolic levels can contain letters and numbers. The
449 % default level is |0|, so |\EditorialComment{text}| is equivalent to
450 % |\EditorialComment[0]{text}|.
451 %
452 % \DescribeMacro{\ECSelect}
453 % The command \cs{ECSelect}\marg{level,level,...} selects the levels
454 % of editorial comments to display in the manuscript mode. Note that
455 % |0| corresponds to the default level, so the command |\ECSelet{0}|
456 % should be used to show these comments.
457 %
458 % Sometimes it is useful to tell the author about typesetter's changes
459 % in the manuscript. The dialog between the author and typesetter
460 % might take several iterations, so the class provides a system for
461 % this dialog.
462 %
463 % \DescribeMacro{\TC}
464 % The macro \cs{TC}\oarg{level}\marg{text} makes \marg{text}
465 % highlighted in the |manuscript| mode if the level \oarg{level} is
466 % chosen. For example,
467 % \begin{verbatim}
468 % This proposition \TC[1]{(first discussed by the author in 2010)} can
469 % be stated as the following.
470 % \end{verbatim}
471 % The level can be numerical, or logical, e.g. |\TC[new]{text}|.
472 % Actually any combination of letters and numbers that does not
473 % contain commas or spaces can be used for level. By default the
474 % level is |0|, so |\TC|\marg{text} is equivalent to
475 % |\TC[0]|\marg{text}.
476 %
477 % \DescribeMacro{\TCSelect}
478 % The decision to highlight certain levels is done by the command
479 % \cs{TCSelect}\oarg{color}\marg{level,level,level...} The first
480 % optional argument is the color used for highlighting; by default
481 % |magenta|. Actually any color expression understandable by
482 % \progname{xcolor} can be used. The second argument is a
483 % comma-separated list of levels that will be highlighted by the
484 % selected color. The command \cs{TCSelect} can be repeated, for example,
485 % \begin{verbatim}
486 % \TCSelect{0,1,new}
487 % \TCSelect[blue]{second-level}
488 % \end{verbatim}
489 % If a level does \emph{not} appear in any \cs{TCSelect} command, it is
490 % not highlighted---that is why we do not need a separate \cs{TCOff}
491 % command.
492 %
493 %
494 %
495 %\section{Special Notes}
496 %\label{sec:guide_notes}
497 %
498 % \DescribeEnv{notes}
499 % Some authors include special notes, for example, bibliography
500 % description, that precede list of references, but follow the
501 % signature block. The environment |notes| is intended for this
502 % purpose. It has one mandatory argument, title, for example
503 % \begin{verbatim}
504 % \begin{notes}{Bibliography notes}
505 % The best discussion of the problem can be found in...
506 % \end{notes}
507 % \end{verbatim}
508 %
509 %
510 %
511 %\subsection{Bibliography}
512 %\label{sec:guide_bib}
513 %
514 % As mentioned above, |resphilosophica| by default uses
515 % |natbib|~\cite{Daly07:Natbib}. You should use |natbib| commands
516 % like |\citet|, |\citep| etc.
517 %
518 % Note that |\bibliographystyle| command should \emph{not} be issued
519 % by the author: the package takes care of this. You just need to
520 % type
521 % \begin{verbatim}
522 % \bibliography{DATABASE, DATABASE...}
523 % \end{verbatim}
524 %
525 % The bibliography style used for the articles is
526 % |resphilosophica.bst|. Compared to standard styles it has two
527 % additional fields:
528 % \begin{description}
529 % \item[doi:] DOI number of the publication. Write there only the
530 % number: the style will automatically add |https://doi.org| and
531 % make the reference clickable.
532 % \item[titlenote:] the note that should be put after the title rather
533 % than at the end of the entry\footnote{This field was proposed by
534 % Maureen Shupsky for the \emph{Annals of Mathematics}
535 % bibliography style.}, for example, the information about
536 % translators, editors of critical editions, etc:
537 % \begin{verbatim}
538 % @book{Knuth94:TheTeXbook,
539 % address = {Reading, MA},
540 % author = {Knuth, Donald Ervin},
541 % titlenote = {Illustrations by Duane Bibby},
542 % publisher = {Addison-Wesley Publishing Company},
543 % series = {Computers \& Typesetting A},
544 % title = {The \TeX book},
545 % year = {1994},
546 % }
547 %
548 % \end{verbatim}
549 %
550 % \end{description}
551 %
552 % \DescribeMacro{\enquote}%
553 % \DescribeMacro{\ensquote}%
554 % The macros \cs{enquote} and \cs{ensquote} put their arguments in
555 % double and single quotes correspondingly. They are used to suppress
556 % unwanted commas and periods inside bibliography entries.
557 %
558 % \DescribeMacro{\suppresscomma}
559 % Sometimes Bib\TeX\ inserts an unwanted comma into an entry, for
560 % example, in the following one:
561 % \begin{verbatim}
562 % @incollection{ande97a,
563 % Address = {Macon, GA},
564 % Author = {Anderson, Thomas C.},
565 % Booktitle = {Concluding Unscientific Postscript to
566 % \enquote{Philosophical Fragments,}},
567 % Date-Modified = {2013-09-04 21:27:17 +0000},
568 % Editor = {Robert Perkins},
569 % Owner = {Andrew},
570 % Pages = {187--204},
571 % Publisher = {Mercer University Press},
572 % Series = {International Kierkegaard Commentary},
573 % Timestamp = {2013.09.04},
574 % Title = {Kierkegaard and Approximation Knowledge},
575 % Volume = {12},
576 % Year = {1997}}
577 % \end{verbatim}
578 % The command \cs{suppresscomma} suppresses the next comma:
579 % \begin{verbatim}
580 % Booktitle = {Concluding Unscientific Postscript to
581 % \enquote{Philosophical Fragments,\suppresscomma}},
582 % \end{verbatim}
583 %
584 %
585 % The bibliography style has a special entry type,
586 % |inloosecollection|. It resembles the standard |incollection|
587 % entry, but it refers to a collection of papers written by separate
588 % authors that are quotable separately as an independent entity. This
589 % entry is typeset slightly differently than the standart
590 % |incollecttion| entry.
591 %
592 %
593 % \DescribeMacro{\AddtoEndMatter}
594 % If you decide to forgo |natbib|, you can use |natbib=false| option.
595 % Then you should remember to put the bibliogrtaphy \emph{after} the
596 % end matter (authors' addresses etc) using the command |\AddtoEndMatter|:
597 % \begin{verbatim}
598 % \AddtoEndMatter{MY BIBLIOGRAPHY COMMANDS}
599 % \end{verbatim}
600 %
601 % \subsection*{Acknowledgments}
602 % This package was commissioned by the journal \emph{Res Philosophica}
603 % and funded by Saint Louis University. I am grateful to Jonathan
604 % Jacobs for tireless testing of the package.
605 %
606 % \StopEventually{%
607 % \bibliography{resphilosophica}
608 % \bibliographystyle{unsrt}}
609 %
610 % \clearpage
611 %
612 %
613 %\section{Implementation}
614 %\label{sec:impl}
615 %
616 %
617 %\subsection{Options}
618 %\label{sec:opts}
619 %
620 % We need |xkeyval| since some of our options may have values:
621 % \begin{macrocode}
622 \RequirePackage{xkeyval}
623 % \end{macrocode}
624 %
625 % \begin{macro}{\ifRESP@fontauto}
626 % First, check whether the user have the body font explicitly
627 % configured:
628 % \begin{macrocode}
629 \newif\ifRESP@fontauto
630 \RESP@fontautotrue
631 % \end{macrocode}
632 %
633 % \end{macro}
634 %
635 %
636 % \begin{macro}{\ifRESP@rpfontauto}
637 % \changes{v1.1}{2012/09/01}{Added macro}
638 % Same for \emph{Res Philosophica} font
639 % \begin{macrocode}
640 \newif\ifRESP@rpfontauto
641 \RESP@rpfontautotrue
642 % \end{macrocode}
643 %
644 % \end{macro}
645 %
646 % \begin{macro}{\ifRESP@lsabon}
647 % Are we using linotype sabon?
648 % \begin{macrocode}
649 \newif\ifRESP@lsabon
650 \RESP@lsabonfalse
651 % \end{macrocode}
652 %
653 % \end{macro}
654 %
655 % \begin{macro}{\ifRESP@mtshadow}
656 % \changes{v1.1}{2012/09/01}{Added macro}
657 % \changes{v1.16}{2012/12/26}{Deleted macro}
658 % Are we using MT Imprint Shadow?
659 % \begin{macrocode}
660 %\newif\ifRESP@mtshadow
661 %\RESP@mtshadowfalse
662 % \end{macrocode}
663 %
664 % \end{macro}
665 %
666 % \begin{macro}{bodyfont}
667 % And the option to check the user input:
668 % \begin{macrocode}
669 \define@choicekey*+{resphilosophica.cls}{bodyfont}[\val\nr]{auto,
670 sabon, lsabon, cm}[auto]{%
671 \ifcase\nr\relax
672 \RESP@fontautotrue
673 \or
674 \RESP@fontautofalse
675 \RESP@lsabontrue
676 \or
677 \RESP@fontautofalse
678 \RESP@lsabontrue
679 \or
680 \RESP@fontautofalse
681 \RESP@lsabonfalse
682 \fi}{%
683 \PackageWarning{resphilosophica}{The option bodyfont must be auto,
684 sabon or cm. Using auto}\RESP@fontautotrue}
685 % \end{macrocode}
686 %
687 % \end{macro}
688 %
689 % \begin{macro}{rpfont}
690 % \changes{v1.1}{2012/09/01}{Added option}
691 % \changes{v1.16}{2013/11/16}{Deleted option}
692 % And the option to check the user input:
693 % \begin{macrocode}
694 % \define@choicekey*+{resphilosophica.cls}{rpfont}[\val\nr]{auto,
695 % imprint, imprintshadow, cm}[auto]{%
696 % \ifcase\nr\relax
697 % \RESP@rpfontautotrue
698 % \or
699 % \RESP@rpfontautofalse
700 % \RESP@mtshadowtrue
701 % \or
702 % \RESP@rpfontautofalse
703 % \RESP@mtshadowtrue
704 % \or
705 % \RESP@rpfontautofalse
706 % \RESP@mtshadowfalse
707 % \fi}{%
708 % \PackageWarning{resphilosophica}{The option rpfont must be auto,
709 % imprintshadow or cm. Using auto}\RESP@rpfontautotrue}
710 % \end{macrocode}
711 %
712 % \end{macro}
713 %
714 %
715 % \begin{macro}{natbib}
716 % Checking natbib option:
717 % \begin{macrocode}
718 \define@boolkey+{resphilosophica.cls}[RESP@]{natbib}[true]{}{%
719 \PackageWarning{resphilosophica}{The option natbib must be
720 yes or no. Using yes}}
721 \RESP@natbibtrue
722 % \end{macrocode}
723 %
724 % \end{macro}
725 %
726 %
727 % The size-changing options produce a warning:
728 % \begin{macrocode}
729 \long\def\RESP@size@warning#1{%
730 \ClassWarning{RESPart}{Size-changing option #1 will not be
731 honored}}%
732 \DeclareOptionX{8pt}{\RESP@size@warning{\CurrentOption}}%
733 \DeclareOptionX{9pt}{\RESP@size@warning{\CurrentOption}}%
734 \DeclareOptionX{10pt}{\RESP@size@warning{\CurrentOption}}%
735 \DeclareOptionX{11pt}{\RESP@size@warning{\CurrentOption}}%
736 \DeclareOptionX{12pt}{\RESP@size@warning{\CurrentOption}}%
737 % \end{macrocode}
738 %
739 % \begin{macro}{\ifRESP@manuscript}
740 % Manuscript mode:
741 % \begin{macrocode}
742 \newif\ifRESP@manuscript
743 \RESP@manuscriptfalse
744 \DeclareOptionX{manuscript}{\RESP@manuscripttrue}
745 % \end{macrocode}
746 %
747 % \end{macro}
748 %
749 % \begin{macro}{\ifRESP@screen}
750 % \changes{v1.4}{2012/09/06}{Added option}
751 % Screen mode:
752 % \begin{macrocode}
753 \newif\ifRESP@screen
754 \RESP@screenfalse
755 \DeclareOptionX{screen}{\RESP@screentrue}
756 % \end{macrocode}
757 %
758 % \end{macro}
759 %
760 %
761 % \begin{macro}{\ifRESP@preprint}
762 % \changes{v1.13}{2013/08/14}{Added option}
763 % Whether we are in the preprint mode
764 % \begin{macrocode}
765 \newif\ifRESP@preprint
766 \RESP@preprintfalse
767 \DeclareOptionX{preprint}{\RESP@preprinttrue}
768 % \end{macrocode}
769 %
770 % \end{macro}
771 % \begin{macro}{\ifRESP@forthcoming}
772 % \changes{v1.13}{2013/08/14}{Added option}
773 % Whether we are in the forthcoming mode
774 % \begin{macrocode}
775 \newif\ifRESP@forthcoming
776 \RESP@forthcomingfalse
777 \DeclareOptionX{forthcoming}{\RESP@forthcomingtrue}
778 % \end{macrocode}
779 %
780 % \end{macro}
781 %
782 % All other options are passed to \progname{amsart}:
783 % \begin{macrocode}
784 \DeclareOptionX{*}{\PassOptionsToClass{\CurrentOption}{amsart}}
785 % \end{macrocode}
786 %
787 % And executing options:
788 % \begin{macrocode}
789 \ProcessOptionsX
790 % \end{macrocode}
791 %
792 %
793 %
794 %\subsection{Loading Classes and Packages}
795 %\label{sec:classes}
796 %
797 % \changes{v1.23}{2014/11/17}{Switched to twoside mode of amsart}
798 % We use |amsart| since it has nice features for front matter:
799 % \begin{macrocode}
800 \LoadClass[noamsfonts,twoside]{amsart}
801 % \end{macrocode}
802 %
803 % \changes{v1.3}{2012/09/05}{Ifpdf is no longer needed with modern engines}
804 % \changes{v1.4}{2012/09/06}{Added footmisc package with `bottom'
805 % option}
806 % \changes{v1.5}{2012/09/07}{Hyperfootnotes are incompatible with
807 % hyperref}
808 % \changes{v1.17}{2013/12/02}{Added collect package}
809 % \changes{v1.30}{2016/12/30}{Split URLs at hyphens}
810 % \changes{v1.38}{2025/07/02}{No longer using lastpage package}
811 % Some packages
812 % \begin{macrocode}
813 \RequirePackage{microtype, fancyhdr, xcolor, collect}
814 \RequirePackage[bottom,multiple]{footmisc}
815 \PassOptionsToPackage{hyphens}{url}
816 \RequirePackage[hyperfootnotes=false]{hyperref}
817 \urlstyle{rm}
818 \ifRESP@manuscript\hypersetup{colorlinks,allcolors=blue}\else
819 \ifRESP@screen\hypersetup{colorlinks,allcolors=blue}\else
820 \ifRESP@preprint\hypersetup{colorlinks,allcolors=blue}\else
821 \ifRESP@forthcoming\hypersetup{colorlinks,allcolors=blue}\else
822 \hypersetup{hidelinks}\fi\fi\fi\fi
823 % \end{macrocode}
824 %
825 %
826 % The font to use depends on the options. Note that \LaTeX\ cannot
827 % reliably determine whether a binary file like |SabonLTRom.pfb|
828 % exists in the system, so we check for the |.fd| file instead (sigh):
829 % \begin{macrocode}
830 \ifRESP@fontauto
831 \IfFileExists{t1lsb.fd}{\RESP@lsabontrue}{\RESP@lsabonfalse}\fi
832 % \end{macrocode}
833 %
834 % If the user wants, we load Sabon and URW Garamond. Note that
835 % mathdesign defines |sc| to be |fsc|, so we need to redefine it for
836 % Sabon. Also, it defines |b| to |mb|. so we redefine it again.
837 %\changes{v1.16}{2013/11/26}{Added \cmd{\bfdefault}}
838 % \begin{macrocode}
839 \ifRESP@lsabon
840 \RequirePackage[mdugm]{mathdesign}
841 \RequirePackage[rmdefault]{lsabon}
842 \renewcommand\scdefault{sc}
843 \renewcommand{\bfdefault}{b}
844 \fi
845 % \end{macrocode}
846 %
847 % Checking the existence of |miih| font metrics:
848 % \begin{macrocode}
849 %\ifRESP@rpfontauto
850 % \IfFileExists{t1miih.fd}{\RESP@mtshadowtrue}{\RESP@mtshadowfalse}\fi
851 % \end{macrocode}
852 %
853 %
854 % \begin{macro}{\rpdefault}
855 % \changes{v1.1}{2012/09/01}{Added macro}
856 % \changes{v1.16}{2013/11/26}{Deleted macro}
857 % This is the font for \emph{Res Philosophica:}
858 % \begin{macrocode}
859 %\ifRESP@mtshadow
860 % \def\rpdefault{miih}\else
861 % \def\rpdefault{\rmdefault}\fi
862 % \end{macrocode}
863 %
864 % \end{macro}
865 %
866 %
867 %
868 % \begin{macro}{\AddtoEndMatter}
869 % A syntax sugar to add something after signature:
870 % \begin{macrocode}
871 \def\AddtoEndMatter#1{\g@addto@macro\enddoc@text{#1}}
872 % \end{macrocode}
873 %
874 % \end{macro}
875 %
876 % And loading natbib:
877 % \changes{v1.2}{2012/09/04}{Changed font for bibliography}
878 % \changes{v1.2}{2012/09/04}{Changed skip for bibliography}
879 % \changes{v1.3}{2012/09/05}{Added penalties}
880 % \changes{v1.4}{2012/09/06}{Changed bibsection font}
881 % \begin{macrocode}
882 \ifRESP@natbib
883 \RequirePackage[round]{natbib}
884 \AtEndDocument{\bibliographystyle{resphilosophica}}
885 \let\RESP@bibliography=\bibliography
886 \def\bibliography#1{\AddtoEndMatter{\RESP@bibliography{#1}}}
887 \def\bibsection{\par\addpenalty\@secpenalty\addvspace{\bigskipamount}%
888 \noindent \Small References:\par\nobreak\vskip\medskipamount\@afterheading}
889 \def\bibfont{\Small}
890 \fi
891 % \end{macrocode}
892 %
893 %
894 %\subsection{Page Dimensions and Paragraphing}
895 %\label{sec:page}
896 %
897 % \begin{macro}{\pdfpaperwidth}
898 % \begin{macro}{\pdfpaperheight}
899 % \changes{v1.3}{2012/09/05}{Deleted ifpdf}
900 % \changes{v1.4}{2012/09/06}{Changed paper in the manuscript mode}
901 % \changes{v1.23}{2014/11/17}{Added to paper width to accomodate
902 % larger thumb side margins}
903 % \changes{v1.25}{2015/01/25}{Returned to old page width}
904 % Paper:
905 % \begin{macrocode}
906 \ifRESP@manuscript\else
907 \AtBeginDocument{\setlength{\pdfpagewidth}{432bp}%
908 \setlength{\pdfpageheight}{648bp}}
909 \fi
910 % \end{macrocode}
911 % \end{macro}
912 % \end{macro}
913 %
914 % \begin{macro}{\textwidth}
915 % \begin{macro}{\textheight}
916 % The size of the type block:
917 % \begin{macrocode}
918 \setlength{\textwidth}{318pt}
919 \setlength{\textheight}{540pt}
920 % \end{macrocode}
921 %
922 % \end{macro}
923 % \end{macro}
924 %
925 % \begin{macro}{\evensidemargin}
926 % \begin{macro}{\oddsidemargin}
927 % \changes{v1.23}{2014/11/17}{Made even- and odd- side margins
928 % different, except in screen and forthcoming modes}
929 % \changes{v1.25}{2015/01/25}{Changed margins}
930 % \changes{v1.35}{2019/04/14}{Changed margins}
931 % The margins:
932 % \begin{macrocode}
933 \setlength{\evensidemargin}{-0.125in}
934 \setlength{\oddsidemargin}{-0.25in}
935 \ifRESP@screen
936 \setlength{\evensidemargin}{-0.1875in}
937 \setlength{\oddsidemargin}{-0.1875in}
938 \fi
939 \ifRESP@forthcoming
940 \setlength{\evensidemargin}{-0.1875in}
941 \setlength{\oddsidemargin}{-0.1875in}
942 \fi
943 % \end{macrocode}
944 %
945 % \end{macro}
946 % \end{macro}
947 %
948 % \begin{macro}{\topmargin}
949 % Top margin
950 % \begin{macrocode}
951 \setlength{\topmargin}{-48pt}
952 % \end{macrocode}
953 %
954 % \end{macro}
955 % \begin{macro}{\listisep}
956 % \changes{v1.2}{2012/09/04}{Redefined}
957 % This is the space around lists. |amsart| defines it as
958 % |\smallskipamount|. We slightly increase it:
959 % \begin{macrocode}
960 \listisep\medskipamount
961 % \end{macrocode}
962 %
963 % \end{macro}
964 %
965 %\subsection{Headers}
966 %\label{sec:headers}
967 %
968 % \begin{macro}{\headsep}
969 % Separation between the header and the body
970 % \begin{macrocode}
971 \setlength{\headsep}{14pt}
972 % \end{macrocode}
973 %
974 %
975 % \begin{macro}{\headheight}
976 % The height of the headers:
977 % \begin{macrocode}
978 \setlength{\headheight}{12pt}
979 % \end{macrocode}
980 %
981 % \end{macro}
982 %
983 % \end{macro}
984 % \begin{macro}{\headrulewidth}
985 % \begin{macro}{\footrulewidth}
986 % We do not want decorative rules in the journal:
987 % \begin{macrocode}
988 \renewcommand{\headrulewidth}{0pt}
989 \renewcommand{\footrulewidth}{0pt}
990 % \end{macrocode}
991 % \end{macro}
992 % \end{macro}
993 %
994 % \begin{macro}{\footskip}
995 % \changes{v1.7}{2012/09/11}{Decreased to fit doi number}
996 % Separation between the footer and the body
997 % \begin{macrocode}
998 \setlength{\footskip}{20pt}
999 % \end{macrocode}
1000 %
1001 % \end{macro}
1002 %
1003 % \begin{macro}{\RESP@printlinecount}
1004 % \changes{v1.13}{2013/08/14}{Added macro}
1005 % Do we want to print line count?
1006 % \begin{macrocode}
1007 \newif\ifRESP@printlinecount
1008 \RESP@printlinecountfalse
1009 \ifRESP@manuscript\RESP@printlinecounttrue\fi
1010 \ifRESP@preprint\RESP@printlinecounttrue\fi
1011 % \end{macrocode}
1012 %
1013 % \end{macro}
1014 %
1015 % \begin{macro}{\RESP@linecount}
1016 % \changes{v1.4}{2012/09/06}{Changed color}
1017 % \changes{v1.5}{2012/09/07}{Changed color}
1018 % \changes{v1.3}{2013/08/14}{Changed check for linecount}
1019 % This is the box displayed in the manuscript mode
1020 % \begin{macrocode}
1021 \ifRESP@printlinecount
1022 \newsavebox{\RESP@linecount}
1023 \savebox{\RESP@linecount}[4em][t]{\parbox[t]{4em}{%
1024 \@tempcnta\@ne\relax
1025 \loop{\color{red}\scriptsize\the\@tempcnta}\\
1026 \advance\@tempcnta by \@ne\ifnum\@tempcnta<47\repeat}}
1027 \fi
1028 % \end{macrocode}
1029 %
1030 % \end{macro}
1031 %
1032 % It is easy to set up headers with \progname{fancyhdr}:
1033 % \changes{v1.4}{2012/09/06}{Changed color of ``Author's proof' mark}
1034 % \changes{v1.5}{2012/09/07}{Changed color for headers and footers}
1035 % \changes{v1.7}{2012/09/11}{Changed formatting of doi}
1036 % \changes{v1.13}{2013/08/14}{Changed check for line numbering mode}
1037 % \begin{macrocode}
1038 \pagestyle{fancy}
1039 \fancyhead{}
1040 \fancyfoot{}
1041 \fancyhead[LE]{\footnotesize\thepage\qquad\itshape\shortauthors}
1042 \fancyhead[RO]{\footnotesize\textit{\shorttitle}\qquad\thepage}
1043 \ifRESP@printlinecount
1044 \fancyhead[LE]{\begin{picture}(0,0)%
1045 \put(-26,-22){\usebox{\RESP@linecount}}%
1046 \end{picture}\footnotesize\thepage\qquad\itshape\shortauthors}
1047 \fancyhead[LO]{\begin{picture}(0,0)%
1048 \put(-21,-22){\usebox{\RESP@linecount}}%
1049 \end{picture}}
1050 \fi
1051 \ifRESP@manuscript
1052 \fancyfoot[C]{\scriptsize\color{red}Author's Proof}%
1053 \fi
1054 \ifRESP@preprint
1055 \fancyfoot[C]{\scriptsize\color{red}Author's Pre-Print}%
1056 \fi
1057 % \end{macrocode}
1058 %
1059 %
1060 % The first page has the special headers. The style |firstpage| is
1061 % invoked by \progname{amsart}; here we just redefine it.
1062 % \changes{v1.17}{2013/12/01}{Journal name on the first page footer is
1063 % now italic}
1064 % \changes{v1.17}{2013/12/01}{Online date for forthcoming option moved
1065 % to the left and up}
1066 % \changes{v1.18}{2013/12/07}{Online date for forthcoming option moved
1067 % down}
1068 % \changes{v1.18}{2013/12/07}{Journal name in Roman}
1069 % \begin{macrocode}
1070 \fancypagestyle{firstpage}{%
1071 \fancyhf{}%
1072 \ifRESP@printlinecount
1073 \lhead{\begin{picture}(0,0)%
1074 \put(-26,-20){\usebox{\RESP@linecount}}%
1075 \end{picture}}
1076 \fi
1077 \ifRESP@preprint
1078 \cfoot{\footnotesize Res Philosophica, \itshape
1079 Vol.~\currentvolume, No.~\currentissue,
1080 \currentmonth~\currentyear
1081 \ifx\@doinumber\@empty\else\\%
1082 \doi{\@doinumber}\fi
1083 \\
1084 \@copyrightnote}%
1085 \chead{\scriptsize\color{red}Author's Pre-print. Forthcoming in
1086 Res Philosophica. Pagination may change. Published version will
1087 be available at \url{http://pdcnet.org/resphilosophica/}}
1088 \else
1089 \ifRESP@forthcoming
1090 \cfoot{\footnotesize Res
1091 Philosophica\itshape
1092 \ifx\currentvolume\@empty\else, %
1093 Vol.~\currentvolume\fi
1094 \ifx\currentissue\@empty\else, No.~\currentissue\fi
1095 \ifx\currentmonth\@empty
1096 \ifx\currentyear\@empty\else, \currentyear\fi
1097 \else,
1098 \currentmonth~\currentyear
1099 \fi
1100 \ifx\@doinumber\@empty\else\\%
1101 \doi{\@doinumber}\fi
1102 \\
1103 \@copyrightnote}%
1104 \lhead{\raisebox{1.5\bigskipamount}[\z@][\z@]{\parbox{\textwidth}{\raggedright\footnotesize Published Online First: \@onlinedate}}}
1105 \else
1106 \cfoot{\footnotesize Res Philosophica, \itshape
1107 \itshape Vol.~\currentvolume, No.~\currentissue,
1108 \currentmonth~\currentyear, pp.~\start@page--\end@page
1109 \ifx\@doinumber\@empty\else\\%
1110 \doi{\@doinumber}\fi
1111 \\
1112 \@copyrightnote}%
1113 \fi\fi}
1114 % \end{macrocode}
1115 %
1116 %
1117 %
1118 %\subsection{Top Matter Macros}
1119 %\label{sec:top_matter_code}
1120 %
1121 % Most top matter macros are defined in \progname{amsart}. Here we
1122 % just add some new macros and redefine some.
1123 %
1124 %
1125 % The next macros mimic the functionality of \progname{amsart}
1126 % |\issueinfo| command. Note that |\issueinfo| still works.
1127 % \begin{macro}{\volumenumber}
1128 % \changes{v1.13}{2013/08/14}{The default is now empty}
1129 % This sets the volume of the paper
1130 % \begin{macrocode}
1131 \def\volumenumber#1{\def\currentvolume{#1}}
1132 \volumenumber{}
1133 % \end{macrocode}
1134 % \end{macro}
1135 % \begin{macro}{\issuenumber}
1136 % \changes{v1.13}{2013/08/14}{The default is now empty}
1137 % This sets the issue of the paper:
1138 % \begin{macrocode}
1139 \def\issuenumber#1{\def\currentissue{#1}}
1140 \issuenumber{}
1141 % \end{macrocode}
1142 % \end{macro}
1143 % \begin{macro}{\publicationyear}
1144 % \changes{v1.13}{2013/08/14}{The default is now empty}
1145 % This sets the year of the paper
1146 % \begin{macrocode}
1147 \def\publicationyear#1{\def\currentyear{#1}}
1148 \publicationyear{}
1149 % \end{macrocode}
1150 % \end{macro}
1151 % \begin{macro}{\publicationmonth}
1152 % \changes{v1.13}{2013/08/14}{The default is now empty}
1153 % \changes{v1.16}{2013/11/26}{Added \cmd{\abbrevcurrentmonth}}
1154 % This sets the month of the paper
1155 % \begin{macrocode}
1156 \newcommand\publicationmonth[2][]{\gdef\currentmonth{#2}%
1157 \gdef\abbrevcurrentmonth{#1}%
1158 \ifx\abbrevcurrentmonth\@empty\gdef\abbrevcurrentmonth{#2}\fi}
1159 \publicationmonth{}
1160 % \end{macrocode}
1161 % \end{macro}
1162 %
1163 % \begin{macro}{\papernumber}
1164 % \changes{v1.11}{2012/12/24}{Added macro}
1165 % This is absent from the |\issueinfo|.
1166 % \begin{macrocode}
1167 \def\papernumber#1{\def\currentpaper{#1}}
1168 \papernumber{0000}
1169 %
1170 % \end{macro}
1171 %
1172 % \begin{macro}{\manuscriptid}
1173 % \changes{v1.29}{2016/08/26}{Added macro}
1174 % Submission id
1175 % \begin{macrocode}
1176 \def\manuscriptid#1{\gdef\@manuscriptid{#1}}
1177 \manuscriptid{}
1178 %
1179 % \end{macro}
1180 %
1181 %
1182 % \begin{macro}{\doinumber}
1183 % \changes{v1.11}{2012/12/25}{Added default}
1184 % \changes{v1.29}{2016/08/26}{Now we use \cs{manuscriptid} to make doi}
1185 % DOI number for the article:
1186 % \begin{macrocode}
1187 \def\doinumber#1{\gdef\@doinumber{#1}}
1188 \doinumber{\ifx\@manuscriptid\@empty
1189 10.11612/resphil.\currentyear.\currentvolume.\currentissue.\currentpaper
1190 \else
1191 10.11612/resphil.\@manuscriptid
1192 \fi}
1193 % \end{macrocode}
1194 % \end{macro}
1195 %
1196 % \begin{macro}{\paperUrl}
1197 % \changes{v1.21}{2014/04/11}{Added macro}
1198 % The url to submit to crossref
1199 % \begin{macrocode}
1200 \def\paperUrl#1{\gdef\@paperUrl{#1}}
1201 \paperUrl{}
1202 % \end{macrocode}
1203 %
1204 % \end{macro}
1205 %
1206 % \begin{macro}{\startpage}
1207 % This defines the starting page of the paper. We have some nice
1208 % features to set up roman page numbers for editorial
1209 % stuff---probably not needed for this journal at this time\dots
1210 % \begin{macrocode}
1211 \def\startpage#1{\pagenumbering{arabic}\setcounter{page}{#1}%
1212 \def\start@page{#1}%
1213 \ifnum\c@page<\z@ \pagenumbering{roman}\setcounter{page}{-#1}%
1214 \def\start@page{\romannumeral#1}%
1215 \fi}
1216 % \end{macrocode}
1217 % \end{macro}
1218 %
1219 %
1220 % \begin{macro}{\endpage}
1221 % This macro again has a twist in it: if the argument is not set, it
1222 % calculates the last page number itself.
1223 % \begin{macrocode}
1224 \def\endpage#1{\def\@tempa{#1}%
1225 \ifx\@tempa\@empty\def\end@page{\pageref{RP@LastPage}}%
1226 \else\def\end@page{#1}\fi}
1227 % \end{macrocode}
1228 % \end{macro}
1229 %
1230 % \begin{macro}{\pagespan}
1231 % This macro is different from the one provided by \progname{amsart}
1232 % because we want to have the option of automatic calculation of the
1233 % last page number.
1234 % \begin{macrocode}
1235 \def\pagespan#1#2{\startpage{#1}\endpage{#2}}
1236 \pagespan{1}{}
1237 % \end{macrocode}
1238 % \end{macro}
1239 %
1240 %
1241 % \begin{macro}{\articleentry}
1242 % This is necessary for |\prevpaper| command. We read the TOC entry
1243 % from the previous paper and increment it by 1. Note that we
1244 % always start with on an odd page, since the additional check
1245 % \begin{macrocode}
1246 \def\articleentry#1#2#3#4{\@tempcnta=#4\relax
1247 \advance\@tempcnta by 1\relax
1248 \ifodd\the\@tempcnta\else\advance\@tempcnta by 1\relax\fi
1249 \startpage{\the\@tempcnta}}
1250 % \end{macrocode}
1251 %
1252 % \end{macro}
1253 %
1254 % \begin{macro}{\prevpaper}
1255 % This sets the previous paper location and reads the information
1256 % from the previous paper
1257 % \begin{macrocode}
1258 \def\prevpaper#1{\IfFileExists{#1.rpi}{%
1259 \ClassInfo{resphilosophica}{%
1260 Reading first page number from the file #1.rpi}%
1261 \input{#1.rpi}%
1262 }{\ClassWarning{resphilosophica}{Cannot find the file #1.rpi.
1263 Did you run latex on the previous paper?}}}
1264 % \end{macrocode}
1265 %
1266 % \end{macro}
1267 %
1268 % \begin{macro}{abstract}
1269 % We slightly redefine abstract comparing to \progname{amsart}
1270 % conventions:
1271 % \begin{macrocode}
1272 \renewenvironment{abstract}{%
1273 \ifx\maketitle\relax
1274 \ClassWarning{resphilosophica}{Abstract should precede
1275 \protect\maketitle\space in AMS derived classes}%
1276 \fi
1277 \global\setbox\abstractbox=\vtop\bgroup%
1278 \vglue1pc%
1279 \list{}{\labelwidth\z@%
1280 \leftmargin3pc \rightmargin\leftmargin%
1281 \listparindent\normalparindent \itemindent\z@%
1282 \parsep\z@ \@plus\p@%
1283 \let\fullwidthdisplay\relax%
1284 }%
1285 \item[]\normalfont\normalsize\textbf{\abstractname:}\space
1286 }{%
1287 \endlist\egroup%
1288 \ifx\@setabstract\relax\@setabstracta\fi%
1289 }
1290 % \end{macrocode}
1291 % \end{macro}
1292 %
1293 % \begin{macro}{\copyrightyear}
1294 % \changes{v1.3}{2013/08/14}{In the forthcoming mode the copyright
1295 % year is the present year}
1296 % This is the copyright year in case it does not coincide with the
1297 % publication year:
1298 % \begin{macrocode}
1299 \def\copyrightyear#1{\def\@copyrightyear{#1}}
1300 \ifRESP@forthcoming
1301 \copyrightyear{\the\year}\else
1302 \copyrightyear{}\fi
1303 % \end{macrocode}
1304 %
1305 % \end{macro}
1306 %
1307 % \begin{macro}{\onlinedate}
1308 % \changes{v1.16}{2013/11/26}{Added macro}
1309 % \begin{macro}{\@onlinedate}
1310 % \changes{v1.16}{2013/11/26}{Added macro}
1311 % Online date for forthcoming issues
1312 % \begin{macrocode}
1313 \def\onlinedate#1{\gdef\@onlinedate{#1}}
1314 \onlinedate{\hspace*{5em}}
1315 % \end{macrocode}
1316 %
1317 % \end{macro}
1318 % \end{macro}
1319 %
1320 % \begin{macro}{\RESP@bulletboxwidth}
1321 % \changes{v1.9}{2012/09/13}{Added macro}
1322 % This is the width of a box with a bullet for copyright note:
1323 % \begin{macrocode}
1324 \newlength\RESP@bulletboxwidth
1325 \settowidth\RESP@bulletboxwidth{\quad\textbullet\quad}
1326 % \end{macrocode}
1327 %
1328 % \end{macro}
1329 %
1330 % \begin{macro}{\copyrightnote}
1331 % \changes{v1.2}{2012/09/02}{Used \cmd{\rpdefault} for RP font}
1332 % \changes{v1.9}{2012/09/13}{Made bullet disappear at break}
1333 % \changes{v1.13}{2013/08/18}{Changed font family for forthcoming
1334 % mode}
1335 % \changes{v1.16}{2013/11/26}{Deleted rpdefault}
1336 % \changes{v1.18}{2013/12/07}{Made journal name Roman}
1337 % This is the copyrightnote. The default has some trickery with the
1338 % year and short authors.
1339 %
1340 % The disappearing bullet is based on the trick by Marcin
1341 % Wolin\'nski, who noted that \cmd{\cleaders} are discardable
1342 % (see~\cite{Jackowski08:TeXBeatiesOddities}).
1343 % \begin{macrocode}
1344 \def\copyrightnote#1{\def\@copyrightnote{#1}}
1345 \copyrightnote{\textcopyright~%
1346 \ifx\@empty\@copyrightyear\currentyear\else\@copyrightyear\fi~%
1347 \shortauthors\cleaders\hbox{\quad\textbullet\quad}\hskip\RESP@bulletboxwidth
1348 \textcopyright~%
1349 \ifx\@empty\@copyrightyear\currentyear\else\@copyrightyear\fi~%
1350 {\upshape Res~Philosophica}}%
1351 % \end{macrocode}
1352 % \end{macro}
1353 %
1354 % \begin{macro}{\author}
1355 % The base class puts into |\addresses| the strange line
1356 % |\author{}|. We correct this:
1357 % \begin{macrocode}
1358 \renewcommand{\author}[2][]{%
1359 \ifx\@empty\addresses
1360 \gdef\addresses{\author{#2}}%
1361 \else
1362 \g@addto@macro\addresses{\author{#2}}%
1363 \fi
1364 \ifx\@empty\authors
1365 \gdef\authors{#2}%
1366 \else
1367 \g@addto@macro\authors{\and#2}%
1368 \fi
1369 \@ifnotempty{#1}{%
1370 \ifx\@empty\shortauthors
1371 \gdef\shortauthors{#1}%
1372 \else
1373 \g@addto@macro\shortauthors{\and#1}%
1374 \fi
1375 }%
1376 }
1377 \edef\author{\@nx\@dblarg
1378 \@xp\@nx\csname\string\author\endcsname}
1379 % \end{macrocode}
1380 %
1381 % \end{macro}
1382 %
1383 % \begin{macro}{\titlenote}
1384 % \changes{v1.13}{2013/08/14}{Added command}
1385 % This command adds an entry to the list of titlenotes
1386 % \begin{macrocode}
1387 \def\@titlenotes{}%
1388 \def\titlenote#1{%
1389 \ifx\@empty\@titlenotes\gdef\@titlenotes{\footnote{#1}}%
1390 \else\g@addto@macro\@titlenotes{\footnote{#1}}\fi}
1391 % \end{macrocode}
1392 %
1393 % \end{macro}
1394 % \begin{macro}{\authornote}
1395 % \changes{v1.24}{2015/01/14}{Added command}
1396 % This command adds an entry to the list of titlenotes
1397 % \begin{macrocode}
1398 \def\@authornotes{}%
1399 \def\authornote#1{%
1400 \ifx\@empty\@authornotes\gdef\@authornotes{\footnote{#1}}%
1401 \else\g@addto@macro\@authornotes{\footnote{#1}}\fi}
1402 % \end{macrocode}
1403 %
1404 % \end{macro}
1405 %
1406 %\subsection{Typesetting Top Matter}
1407 %\label{sec:maketitle}
1408 %
1409 %
1410 % \begin{macro}{\@settitle}
1411 % \changes{v1.3}{2012/09/05}{Deleted ifpdf}
1412 % \changes{v1.13}{2013/08/14}{Added titlenotes}
1413 % \changes{v1.26}{2015/08/22}{Added itscshape}
1414 % We do not uppercase title. Also, we use this occasion to set PDF
1415 % information:
1416 % \begin{macrocode}
1417 \def\@settitle{\begin{center}%
1418 \baselineskip20\p@\relax
1419 \LARGE\scshape
1420 \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
1421 \ifx\itscshape\@undefined\else\def\em{\itscshape}\fi
1422 \@title\@titlenotes
1423 \hypersetup{pdftitle=\@title}%
1424 \end{center}%
1425 }
1426 % \end{macrocode}
1427 % \end{macro}
1428 %
1429 % \begin{macro}{\@setauthors}
1430 % \changes{v1.1}{2012/09/01}{Changed font}
1431 % \changes{v1.2}{2012/09/04}{Changed font}
1432 % \changes{v1.3}{2012/09/05}{Deleted ifpdf}
1433 % \changes{v1.24}{2015/01/14}{Added authornotes}
1434 % Now we typeset authors according to our specs. Again, we use this
1435 % occasion to set some PDF information:
1436 % \begin{macrocode}
1437 \def\@setauthors{%
1438 \ifx\authors\@empty\relax\else
1439 \begingroup
1440 \def\thanks{\protect\thanks@warning}%
1441 \trivlist
1442 \centering\footnotesize \@topsep30\p@\relax
1443 \advance\@topsep by -\baselineskip
1444 \item\relax
1445 \def\@@and{{and}}
1446 \author@andify\authors
1447 \hypersetup{pdfauthor=\authors}%
1448 \def\\{\protect\linebreak}%
1449 \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
1450 \large\normalfont\authors\@authornotes
1451 \endtrivlist
1452 \endgroup
1453 \fi}
1454 % \end{macrocode}
1455 % \end{macro}
1456 %
1457 % \begin{macro}{\maketitle}
1458 % We redefine |\maketitle|---mostly to prevent uppercasing of
1459 % shorttitle and to write down the journal iformation:
1460 %\changes{v1.16}{2013/11/26}{Added suppressing first para inentation}
1461 % \begin{macrocode}
1462 \def\maketitle{\par
1463 \@topnum\z@ % this prevents figures from falling at the top of page 1
1464 \@setcopyright
1465 \thispagestyle{firstpage}% this sets first page specifications
1466 \ifx\@empty\shortauthors \let\shortauthors\shorttitle
1467 \else \andify\shortauthors
1468 \fi
1469 \@maketitle@hook
1470 \RESP@write@paper@info
1471 \begingroup
1472 \@maketitle
1473 \toks@\@xp{\shortauthors}\@temptokena\@xp{\shorttitle}%
1474 \toks4{\def\\{ \ignorespaces}}% defend against questionable usage
1475 \edef\@tempa{%
1476 \@nx\markboth{\the\toks4
1477 \@nx\MakeUppercase{\the\toks@}}{\the\@temptokena}}%
1478 \@tempa
1479 \endgroup
1480 \c@footnote\z@
1481 \everypar{\setbox\z@\lastbox\everypar{}}%
1482 }
1483 % \end{macrocode}
1484 %
1485 % \end{macro}
1486 %
1487 % \begin{macro}{\@maketitle}
1488 % \changes{v1.1}{2012/09/01}{Redefined macro}
1489 % We delete top space introduced by |amsart|:
1490 % \begin{macrocode}
1491 \def\@maketitle{%
1492 \normalfont\normalsize
1493 \@adminfootnotes
1494 \@mkboth{\@nx\shortauthors}{\@nx\shorttitle}%
1495 \@settitle
1496 \ifx\@empty\authors \else \@setauthors \fi
1497 \ifx\@empty\@dedicatory
1498 \else
1499 \baselineskip18\p@
1500 \vtop{\centering{\footnotesize\itshape\@dedicatory\@@par}%
1501 \global\dimen@i\prevdepth}\prevdepth\dimen@i
1502 \fi
1503 \@setabstract
1504 \normalsize
1505 \if@titlepage
1506 \newpage
1507 \else
1508 \dimen@34\p@ \advance\dimen@-\baselineskip
1509 \vskip\dimen@\relax
1510 \fi
1511 } % end \@maketitle
1512 % \end{macrocode}
1513 %
1514 % \end{macro}
1515 %
1516 % \begin{macro}{\@mainrpi}
1517 % The stream for the rpi file:
1518 % \begin{macrocode}
1519 \newwrite\@mainrpi
1520 % \end{macrocode}
1521 %
1522 % \end{macro}
1523 %
1524 % \begin{macro}{\RESP@write@paper@info}
1525 % \changes{v1.1}{2012/09/01}{Added protection for \cmd{\\}}
1526 % \changes{v1.2}{2012/09/02}{Used \cmd{\protected@write}}
1527 % \changes{v1.11}{2012/12/25}{Added writing info for crossref}
1528 % \changes{v1.21}{2014/04/11}{Added paperUrl}
1529 % \changes{v1.39}{2025/09/30}{Updated for the new version of last page
1530 % calculation}
1531 % This writes the information about the paper into the file
1532 % |jobname.rpi|. Note that hyperref makes our life a little bit
1533 % more complex
1534 % \begin{macrocode}
1535 \def\RESP@write@paper@info{%
1536 \bgroup
1537 \if@filesw
1538 \openout\@mainrpi\jobname.rpi%
1539 \write\@mainrpi{\relax}%
1540 \ifx\r@RP@LastPage\@undefined
1541 \edef\@tempa{\start@page}%
1542 \else
1543 \def\@tempc##1##2##3##4##5{##2}%
1544 \edef\@tempa{\expandafter\@tempc\r@RP@LastPage}%
1545 \fi
1546 \def\and{\string\and\space}%
1547 \protected@write\@mainrpi{}%
1548 {\string\articleentry{\authors}{\@title}{\start@page}{\@tempa}}%
1549 % \end{macrocode}
1550 % The next lines are for crossref software
1551 % \begin{macrocode}
1552 \protected@write\@mainrpi{}%
1553 {\@percentchar authors=\authors}%
1554 \protected@write\@mainrpi{}%
1555 {\@percentchar title=\@title}%
1556 \protected@write\@mainrpi{}%
1557 {\@percentchar year=\currentyear}%
1558 \protected@write\@mainrpi{}%
1559 {\@percentchar volume=\currentvolume}%
1560 \protected@write\@mainrpi{}%
1561 {\@percentchar issue=\currentissue}%
1562 \protected@write\@mainrpi{}%
1563 {\@percentchar paper=\currentpaper}%
1564 \protected@write\@mainrpi{}%
1565 {\@percentchar startpage=\start@page}%
1566 \protected@write\@mainrpi{}%
1567 {\@percentchar endpage=\@tempa}%
1568 \protected@write\@mainrpi{}%
1569 {\@percentchar doi=\@doinumber}%
1570 \ifx\@paperUrl\@empty\else
1571 \protected@write\@mainrpi{}%
1572 {\@percentchar paperUrl=\@paperUrl}%
1573 \fi
1574 \closeout\@mainrpi
1575 \fi
1576 \egroup}
1577 % \end{macrocode}
1578 %
1579 % \end{macro}
1580 %
1581 %
1582 % \begin{macro}{\@adminfootnotes}
1583 % \changes{v1.2}{2012/09/04}{Redefined}
1584 % We just define this to noop:
1585 % \begin{macrocode}
1586 \def\@adminfootnotes{}
1587 % \end{macrocode}
1588 %
1589 % \end{macro}
1590 %
1591 % \begin{macro}{\@cleartopmattertags}
1592 % \changes{v1.2}{2012/09/04}{Redefined}
1593 % We typeset thankses at the end of the paper so we do not clear them:
1594 % \begin{macrocode}
1595 \def\@cleartopmattertags{%
1596 \def\do##1{\let##1\relax}%
1597 \do\maketitle \do\@maketitle \do\title \do\@xtitle \do\@title
1598 \do\author \do\@xauthor \do\address \do\@xaddress
1599 \do\contrib \do\contribs \do\xcontribs \do\toccontribs
1600 \do\email \do\@xemail \do\curraddr \do\@xcurraddr
1601 \do\commby \do\@commby
1602 \do\dedicatory \do\@dedicatory \do\thanks
1603 \do\keywords \do\@keywords \do\subjclass \do\@subjclass
1604 % \end{macrocode}
1605 % \begin{macro}{\sf@size}
1606 % \changes{v1.8}{2012/09/12}{Added definition}
1607 % \changes{v1.14}{2013/08/28}{Bug corrected}
1608 % It seems there is a bug in |mdugm| when calculating |\sf@size|.
1609 % Here we work around it:
1610 % \begin{macrocode}
1611 \def\sf@size{7}%
1612 % \end{macrocode}
1613 %
1614 % \end{macro}
1615 % \begin{macrocode}
1616 }
1617 % \end{macrocode}
1618 %
1619 % \end{macro}
1620 %
1621 %
1622 %\subsection{Notes}
1623 %\label{sec:notes}
1624 %
1625 %
1626 % \begin{macro}{\notes}
1627 % \changes{v1.16}{2013/11/28}{Added macro}
1628 % \changes{v1.17}{2013/12/02}{Redefined using collect package}
1629 % This is like |bibliography|:
1630 % \begin{macrocode}
1631 \definecollection{notes}
1632 \newenvironment{notes}[1]{%
1633 \@nameuse{collect}{notes}{}{}%
1634 \makeatletter
1635 \par\addpenalty\@secpenalty\addvspace{\bigskipamount}%
1636 \noindent \Small #1:\par\nobreak\vskip\medskipamount\@afterheading
1637 \makeatother
1638 }{\@nameuse{endcollect}\AddtoEndMatter{\includecollection{notes}}}
1639 % \end{macrocode}
1640 %
1641 % \end{macro}
1642 %
1643 %\subsection{Typesetting End Matter}
1644 %\label{sec:endmatter}
1645 %
1646 % End matter is typeset at the end of the paper.
1647 %
1648 % \begin{macro}{\if@enddoc}
1649 % \changes{v1.5}{2012/09/07}{Added macro}
1650 % Check whether we are in the end matter
1651 % \begin{macrocode}
1652 \newif\if@enddoc
1653 \@enddocfalse
1654 % \end{macrocode}
1655 %
1656 % \end{macro}
1657 %
1658 % \begin{macro}{\enddoc@text}
1659 % \changes{v1.2}{2012/09/04}{Redefined}
1660 % \changes{v1.5}{2012/09/07}{Added flag}
1661 % \changes{v1.8}{2012/09/12}{Changed bibliography}
1662 % \changes{v1.32}{2018/02/21}{Changed spelling of `Acknowledgments'
1663 % (Joe Salerno)}
1664 % We put thankses into end matter. Also, we redefine bibliography
1665 % back to the original definition in case someone writes
1666 % |\AddtoEndMatter{\bibliography{}}|
1667 % \begin{macrocode}
1668 \def\enddoc@text{%
1669 \@enddoctrue\def\bibliography{\RESP@bibliography}%
1670 \ifx\@empty\thankses\else
1671 \bgroup
1672 \let\@makefnmark\relax
1673 \let\@thefnmark\relax
1674 % \end{macrocode}
1675 % Check, whether we are at the same page as the last footnote; if yes,
1676 % add medskip.
1677 % \begin{macrocode}
1678 \ifx\lastfootnote@page\@undefined\else
1679 \@tempcnta=\lastfootnote@page\relax
1680 \ifnum\c@page=\@tempcnta\relax
1681 \insert\footins{\medskip}%
1682 \fi
1683 \fi
1684 % \end{macrocode}
1685 %
1686 %
1687 % \begin{macrocode}
1688 \@footnotetext{%
1689 \def\par{\let\par\@par}\textbf{Acknowledgments\quad} \@setthanks}%
1690 \egroup
1691 \fi
1692 \ifx\@empty\@translators \else\@settranslators\fi
1693 \ifx\@empty\addresses \else\@setaddresses\fi}
1694 % \end{macrocode}
1695 %
1696 % \end{macro}
1697 %
1698 % \begin{macro}{\ifRESP@firstingroup}
1699 % A group of authors is separated by a skip from another group.
1700 % This macro checks whether this is the first one
1701 % \begin{macrocode}
1702 \newif\ifRESP@firstingroup
1703 % \end{macrocode}
1704 %
1705 % \end{macro}
1706 %
1707 % \begin{macro}{\emailaddrname}
1708 % The name for e-mail address:
1709 % \begin{macrocode}
1710 \def\emailaddrname{E-mail}
1711 % \end{macrocode}
1712 %
1713 % \end{macro}
1714 %
1715 %
1716 % \begin{macro}{\@setaddresses}
1717 % \changes{v1.2}{2012/09/04}{Changed font}
1718 % \changes{v1.3}{2012/09/05}{Added penalties}
1719 % \changes{v1.9}{2012/09/13}{Added penalties}
1720 % \changes{v1.34}{2019/03/14}{Deleted thin spaces before :}
1721 % Unlike |aomart|, we want to preserve author's name in the address
1722 % block. Also, we want to keep linebreaks and to have clickable
1723 % e-mail and URL.
1724 %
1725 % We want to skip between the author groups (several authors with
1726 % the same affiliation), so we check whether the previous line
1727 % contains another author:
1728 % \begin{macrocode}
1729 \def\@setaddresses{\par
1730 \nobreak \begingroup\flushright\clubpenalty\@MM\interlinepenalty\@MM
1731 \widowpenalty\@MM
1732 \RESP@firstingrouptrue
1733 \Small
1734 \def\author##1{\nobreak\ifRESP@firstingroup\par
1735 \addvspace\bigskipamount\penalty-1000\fi
1736 \RESP@firstingroupfalse##1\par\nobreak}%
1737 \parindent\z@
1738 \def\address##1##2{\RESP@firstingrouptrue\begingroup
1739 \par\nobreak
1740 \@ifnotempty{##1}{(\ignorespaces##1\unskip) }%
1741 {\ignorespaces##2}\par\endgroup}%
1742 \def\curraddr##1##2{\RESP@firstingrouptrue\begingroup
1743 \@ifnotempty{##2}{\nobreak\indent\curraddrname
1744 \@ifnotempty{##1}{, \ignorespaces##1\unskip}:\space
1745 ##2\par}\endgroup}%
1746 \def\email##1##2{\RESP@firstingrouptrue\begingroup
1747 \@ifnotempty{##2}{\nobreak\indent\emailaddrname
1748 \@ifnotempty{##1}{, \ignorespaces##1\unskip}:\space
1749 \href{mailto:##2}{\nolinkurl{##2}}\par}\endgroup}%
1750 \def\urladdr##1##2{\RESP@firstingrouptrue\begingroup
1751 \@ifnotempty{##2}{\nobreak\indent
1752 \@ifnotempty{##1}{, \ignorespaces##1\unskip}%
1753 \url{##2}\par}\endgroup}%
1754 \addresses
1755 \endgroup
1756 }
1757 % \end{macrocode}
1758 %
1759 % \end{macro}
1760 %
1761 % \changes{v1.22}{2014/04/17}{Now we add empty even page at the end
1762 % for printed version only}
1763 % \changes{v1.38}{2025/07/02}{Rewrote code for last page, removing the
1764 % dependency on the lastpage package}
1765 % At the end we eject the last page. If the document is printed and
1766 % the last page is odd, we add an empty page. It is not counted in
1767 % the |RP@LastPage| count. We use code from lastpage package
1768 % \begin{macrocode}
1769 \AtEndDocument{\clearpage
1770 \begingroup%
1771 \addtocounter{page}{-1}%
1772 \def\Hy@temp{\arabic{page}}%
1773 \immediate\write\@auxout{%
1774 \string\newlabel{RP@LastPage}{{}{\thepage}{}{%
1775 \ifHy@pageanchor page.\Hy@temp\fi}{}}%
1776 }%
1777 \addtocounter{page}{+1}%
1778 \endgroup%
1779 \ifRESP@manuscript\else
1780 \ifRESP@screen\else
1781 \ifRESP@preprint\else
1782 \ifRESP@forthcoming\else
1783 \cleardoublepage
1784 \fi\fi\fi\fi}
1785 % \end{macrocode}
1786 %
1787 %
1788 %\subsection{Sectioning}
1789 %\label{sec:sectioning}
1790 %
1791 % \begin{macro}{\@seccntformat}
1792 % We do not want our numbers to be upright and medium series, as
1793 % |amsart| wants:
1794 % \begin{macrocode}
1795 \def\@seccntformat#1{%
1796 \csname the#1\endcsname\enspace
1797 }
1798 % \end{macrocode}
1799 %
1800 % \end{macro}
1801 %
1802 % \begin{macro}{\section}
1803 % \changes{v1.1}{2012/09/01}{Moved to LaTeX defaults}
1804 % \changes{v1.2}{2012/09/04}{Changed font}
1805 % We want our sections to be large and bold:
1806 % \begin{macrocode}
1807 \renewcommand\section{\@startsection {section}{1}{\z@}%
1808 {-3.5ex \@plus -1ex \@minus -.2ex}%
1809 {2.3ex \@plus.2ex}%
1810 {\normalfont\large\bfseries}}
1811 % \end{macrocode}
1812 % \end{macro}
1813 %
1814 % \begin{macro}{\subsection}
1815 % \changes{v1.1}{2012/09/01}{Moved to LaTeX defaults}
1816 % \changes{v1.2}{2012/09/04}{Changed font}
1817 % Subsections are bold
1818 % \begin{macrocode}
1819 \renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
1820 {-3.25ex\@plus -1ex \@minus -.2ex}%
1821 {1.5ex \@plus .2ex}%
1822 {\normalfont\normalsize\bfseries}}
1823 % \end{macrocode}
1824 % \end{macro}
1825 %
1826 % \begin{macro}{\subsubsection}
1827 % \changes{v1.1}{2012/09/01}{Moved to LaTeX defaults}
1828 % \changes{v1.2}{2012/09/04}{Changed font}
1829 % Subsubsections are normalsize and italic
1830 % \begin{macrocode}
1831 \renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
1832 {-3.25ex\@plus -1ex \@minus -.2ex}%
1833 {1.5ex \@plus .2ex}%
1834 {\normalfont\normalsize\itshape}}
1835 % \end{macrocode}
1836 % \end{macro}
1837 %
1838 %
1839 % \begin{macro}{\paragraph}
1840 % \changes{v1.4}{2012/09/06}{Moved to LaTeX default}
1841 % Paragraphs:
1842 % \begin{macrocode}
1843 \renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
1844 {3.25ex \@plus1ex \@minus.2ex}%
1845 {-1em}%
1846 {\normalfont\normalsize\bfseries}}
1847 % \end{macrocode}
1848 %
1849 % \end{macro}
1850 %
1851 % \begin{macro}{\subparagraph}
1852 % \changes{v1.4}{2012/09/06}{Moved to LaTeX default}
1853 % Paragraphs:
1854 % \begin{macrocode}
1855 \renewcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
1856 {3.25ex \@plus1ex \@minus .2ex}%
1857 {-1em}%
1858 {\normalfont\normalsize\bfseries}}
1859 % \end{macrocode}
1860 %
1861 % \end{macro}
1862 %
1863 %\subsection{Additional Commands}
1864 %\label{sec:additional}
1865 %
1866 %
1867 % \begin{macro}{\@mparswitch}
1868 % \changes{v1.1}{2012/09/01}{Changed default}
1869 % We always put marginpars on the right since the line box is on the left
1870 % \begin{macrocode}
1871 \@mparswitchfalse
1872 % \end{macrocode}
1873 %
1874 % \end{macro}
1875 %
1876 % \begin{macro}{\EditorialComment}
1877 % \changes{v1.1}{2012/09/01}{Added macro}
1878 % \changes{v1.4}{2012/09/06}{Changed font}
1879 % \changes{v1.4}{2012/09/06}{Changed color}
1880 % \changes{v1.5}{2012/09/07}{Changed color}
1881 % \changes{v1.17}{2013/12/01}{Redefined so levels are suported}
1882 % This macro is noop in normal mode, but is a tiny marginpar in the
1883 % manusript mode
1884 % \begin{macrocode}
1885 \newcommand\EditorialComment[2][0]{%
1886 \expandafter\ifx\csname EditorialComment@#1\endcsname\relax
1887 \else\bgroup
1888 \marginparwidth=200pt\marginpar{\color{red}%
1889 \raggedright#2}\egroup\fi}
1890 % \end{macrocode}
1891 % \end{macro}
1892 %
1893 % \begin{macro}{\ECSelect}
1894 % \changes{v1.17}{2013/12/01}{Added macro}
1895 % This selects the given levels
1896 % \begin{macrocode}
1897 \def\ECSelect#1{\ifRESP@manuscript
1898 \@for\EC@level:=#1\do{%
1899 \expandafter\gdef\csname
1900 EditorialComment@\EC@level\endcsname{\EditorialComment}}%
1901 \fi}
1902 % \end{macrocode}
1903 %
1904 % \end{macro}
1905 %
1906 % \begin{macro}{\TC}
1907 % \changes{v1.16}{2013/11/27}{Added macro}
1908 % The command to highlight text if the corresponding level is
1909 % selected. The first argument is the level, the second is text.
1910 % \begin{macrocode}
1911 \newcommand\TC[2][0]{%
1912 \expandafter\ifx\csname TC@highlight@#1\endcsname\relax#2\else
1913 \csname TC@highlight@#1\endcsname{#2}\fi}
1914 % \end{macrocode}
1915 %
1916 % \end{macro}
1917 %
1918 % \begin{macro}{\TCSelect}
1919 % \changes{v1.16}{2013/11/27}{Added macro}
1920 % \changes{v1.19}{2013/12/23}{Switched off colored links}
1921 % This switches on the selected levels in the mqnuscript version
1922 % \begin{macrocode}
1923 \newcommand\TCSelect[2][magenta]{\ifRESP@manuscript
1924 \@for\TC@level:=#2\do{\expandafter
1925 \gdef\csname TC@highlight@\TC@level\endcsname##1{\bgroup
1926 \Hy@colorlinksfalse
1927 \def\Hy@colorlink####1{\begingroup}%
1928 \def\Hy@endcolorlink{\endgroup}%
1929 \color{#1}##1\egroup}}%
1930 \fi}
1931 % \end{macrocode}
1932 %
1933 % \end{macro}
1934 %
1935 %
1936 % \begin{macro}{\doi}
1937 % \changes{v1.1}{2012/09/01}{Added macro}
1938 % \changes{v1.7}{2012/09/11}{Changed formatting}
1939 % \changes{v1.31}{2017/03/28}{Changed formatting of doi}
1940 % Typesetting doi\dots
1941 % \begin{macrocode}
1942 \def\doi#1{\url{https://doi.org/#1}}
1943 % \end{macrocode}
1944 % \end{macro}
1945 %
1946 % \begin{macro}{\@makefnmark}
1947 % \changes{v1.20}{2014/03/25}{Redefined}
1948 % The definition of \cs{@makefnmark} in amsart has a bug. Here we
1949 % return to the \LaTeX\ one:
1950 % \begin{macrocode}
1951 \def\@makefnmark{\hbox{\@textsuperscript{\normalfont\@thefnmark}}}
1952 % \end{macrocode}
1953 %
1954 % \end{macro}
1955 %
1956 % \begin{macro}{\@makefntext}
1957 % \changes{v1.4}{2012/09/06}{Redefined}
1958 % \changes{v1.5}{2012/09/06}{Added writing the current footnote page
1959 % to the aux file}
1960 % \changes{v1.16}{2013/11/26}{Added small space after footnote mark}
1961 % Unlike |amsart|, we do not indent footnotes:
1962 % \begin{macrocode}
1963 \def\@makefntext{\noindent\@makefnmark
1964 \if@enddoc\else
1965 \immediate\write\@mainaux%
1966 {\string\xdef\string\lastfootnote@page{\the\c@page}}%
1967 \fi}
1968 \long\def\@footnotetext#1{%
1969 \insert\footins{%
1970 \normalfont\footnotesize
1971 \interlinepenalty\interfootnotelinepenalty
1972 \splittopskip\footnotesep \splitmaxdepth \dp\strutbox
1973 \floatingpenalty\@MM \hsize\columnwidth
1974 \@parboxrestore \parindent\normalparindent \sloppy
1975 \protected@edef\@currentlabel{%
1976 \csname p@footnote\endcsname\@thefnmark}%
1977 \@makefntext{%
1978 \,\rule\z@\footnotesep\ignorespaces#1\unskip\strut\par}}}
1979 % \end{macrocode}
1980 %
1981 % \end{macro}
1982 %
1983 %\subsection{The End}
1984 %\label{sec:end}
1985 %
1986 %
1987 % Philosophers love footnotes, since |\raggedbottom|
1988 % \begin{macrocode}
1989 \raggedbottom\normalsize\normalfont
1990 %</class>
1991 % \end{macrocode}
1992 %
1993 %
1994 %\Finale
1995 %\clearpage
1996 %
1997 %\PrintChanges
1998 %\clearpage
1999 %\PrintIndex
2000 %
2001 \endinput