| 1 |
% \iffalse meta-comment |
| 2 |
% |
| 3 |
% Copyright (C) 2007-2022 by Christoph Bersch <[email protected]> |
| 4 |
% |
| 5 |
% This work may be distributed and/or modified under the |
| 6 |
% conditions of the LaTeX Project Public License, either version 1.3c |
| 7 |
% of this license or (at your option) any later version. |
| 8 |
% The latest version of this license is in |
| 9 |
% http://www.latex-project.org/lppl.txt |
| 10 |
% and version 1.3c or later is part of all distributions of LaTeX |
| 11 |
% version 2008/05/04 or later. |
| 12 |
% \fi |
| 13 |
% |
| 14 |
% \iffalse |
| 15 |
%<*driver> |
| 16 |
\ProvidesFile{pst-optexp.dtx} |
| 17 |
%</driver> |
| 18 |
%<stylefile>\NeedsTeXFormat{LaTeX2e}[1999/12/01] |
| 19 |
%<stylefile>\ProvidesPackage{pst-optexp} |
| 20 |
%<*stylefile> |
| 21 |
[2022/02/26 v6.1 Optical experimental setups with PSTricks] |
| 22 |
%</stylefile> |
| 23 |
% |
| 24 |
%<*driver> |
| 25 |
\documentclass[ |
| 26 |
paper=a4, |
| 27 |
headinclude=false, |
| 28 |
footinclude=false, |
| 29 |
oneside, |
| 30 |
toc=index, |
| 31 |
headsepline, |
| 32 |
parskip=half-]{scrreprt} |
| 33 |
\usepackage{doc} |
| 34 |
\setcounter{IndexColumns}{2} |
| 35 |
\usepackage[utf8]{inputenc} |
| 36 |
\usepackage[T1]{fontenc} |
| 37 |
\usepackage{lmodern} |
| 38 |
\usepackage{amsmath, marvosym} |
| 39 |
\usepackage{bera} |
| 40 |
\providecommand*\mainlang{} |
| 41 |
\usepackage[ngerman, english,\mainlang]{babel} |
| 42 |
\usepackage{prettyref} |
| 43 |
\usepackage[dvipsnames,x11names,svgnames]{xcolor} |
| 44 |
\usepackage{array,booktabs,paralist,tabularx} |
| 45 |
\usepackage{ragged2e, calc} |
| 46 |
\newlength{\POEcaptionmargin} |
| 47 |
\newlength{\POEcaptionheight} |
| 48 |
\usepackage[labelfont={color=DOrange}, |
| 49 |
singlelinecheck=false, |
| 50 |
justification=raggedright]{caption} |
| 51 |
\DeclareCaptionFormat{poenocaption}{% |
| 52 |
\setlength{\POEcaptionmargin}{\widthof{#1}+7pt}% |
| 53 |
\setlength{\POEcaptionheight}{\heightof{#1}+3pt}% |
| 54 |
\hspace*{-\POEcaptionmargin}#1\par\vspace*{-\POEcaptionheight}% |
| 55 |
}% |
| 56 |
\DeclareCaptionFormat{poecaption}{% |
| 57 |
\setlength{\POEcaptionmargin}{\widthof{#1}+7pt}% |
| 58 |
\hspace*{-\POEcaptionmargin}#1#2#3\par |
| 59 |
}% |
| 60 |
\captionsetup[lstlisting]{format=poenocaption} |
| 61 |
\usepackage{nicefrac} |
| 62 |
\usepackage{pst-func} |
| 63 |
\usepackage{pst-optexp} |
| 64 |
\usepackage[makeindex]{splitidx} |
| 65 |
\usepackage{hypdoc} |
| 66 |
\hypersetup{% |
| 67 |
colorlinks=true, |
| 68 |
urlcolor=DOrange, |
| 69 |
linkcolor=pdflinkcolor, |
| 70 |
breaklinks, |
| 71 |
linktocpage=true} |
| 72 |
\usepackage{breakurl} |
| 73 |
\definecolor{DOrange}{rgb}{1,.4,.2}% |
| 74 |
\definecolor{DDOrange}{rgb}{0.7, 0.23, 0.07}% |
| 75 |
\colorlet{pdflinkcolor}{DOrange} |
| 76 |
\colorlet{DGreen}{green!90!black} |
| 77 |
\usepackage{pst-tree} |
| 78 |
\usepackage{showexpl} |
| 79 |
\usepackage{scrhack} |
| 80 |
\makeatletter\renewcommand*\SX@Info{}\makeatother |
| 81 |
\usepackage{etoolbox} |
| 82 |
\undef{\cs}\undef{\cmd} |
| 83 |
\usepackage{ltxdockit} |
| 84 |
\newcommand{\poeTR}[1]{\TR{\ttfamily\color{DOrange}#1}} |
| 85 |
\definecolor{colKeys}{rgb}{0,0,0} |
| 86 |
\definecolor{colIdentifier}{rgb}{0,0,0} |
| 87 |
\colorlet{colComments}{green!60!black} |
| 88 |
\definecolor{colString}{rgb}{0,0.5,0} |
| 89 |
\newlength{\codeoverhang} |
| 90 |
\setlength{\codeoverhang}{0.5\marginparwidth+\marginparsep} |
| 91 |
\lstset{% |
| 92 |
language=[LaTeX]TeX, identifierstyle=\color{colIdentifier}, |
| 93 |
keywordstyle=\color{colKeys}, |
| 94 |
keywordstyle = [21]\color{DOrange}, |
| 95 |
keywordstyle = [22]\color{DOrange}, |
| 96 |
stringstyle=\color{colString}, |
| 97 |
commentstyle=\color{colComments}, |
| 98 |
alsoletter={12}, |
| 99 |
float=hbp, |
| 100 |
basicstyle=\ttfamily\small, |
| 101 |
columns=flexible, |
| 102 |
tabsize=4, |
| 103 |
showspaces=false, |
| 104 |
showstringspaces=false, |
| 105 |
breaklines=true, |
| 106 |
breakautoindent=true, |
| 107 |
breakatwhitespace=true, |
| 108 |
captionpos=t, |
| 109 |
belowcaptionskip=0pt, |
| 110 |
abovecaptionskip=0pt, |
| 111 |
xleftmargin=1em, |
| 112 |
prebreak = {\raisebox{-0.5ex}[\ht\strutbox]{\kern0.5ex\large\Righttorque}}, |
| 113 |
rulecolor=\color{black!20}, |
| 114 |
texcsstyle = [20]\color{DDOrange}, |
| 115 |
moretexcs = [20]{lens, optbox, oenode, oenodeIn, oenodeExt, oenodeOut, |
| 116 |
oenodeRefA, oenodeRefB, oenodeTrefA, oenodeTrefB, oenodeLabel, |
| 117 |
oenodeRotref, oenodeBeam, oenodeBeamUp, oenodeBeamLow, oenodeCenter, |
| 118 |
oenodeIfc, oeBeamVec, oeBeamVecUp, oeBeamVecLow, oeBeamVecMedian, |
| 119 |
oeBeamCenter, optplate, optretplate, pinhole, crystal, optdetector, |
| 120 |
optdiode, doveprism, glanthompson, polarization, mirror, parabolicmirror, |
| 121 |
oapmirror, axicon, optwedge, asphericlens, |
| 122 |
beamsplitter, optgrating, optprism, rightangleprism, pentaprism, optaom, |
| 123 |
optdipole, opttripole, optfiber, optamp, optmzm, optfilter, optsource, |
| 124 |
polcontrol, optisolator, optswitch, fiberdelayline, |
| 125 |
optfiberpolarizer, fibercollimator, optcoupler, wdmcoupler, |
| 126 |
wdmsplitter, optcirculator, fiberbox, eleccoupler, elecsynthesizer, |
| 127 |
elecmixer, optarrowcomp, optbarcomp, transmissiongrating, drawbeam, drawwidebeam, |
| 128 |
drawfiber, drawwire, frontlayer, backlayer, newOptexpDipole, |
| 129 |
newOptexpTripole, newOptexpFiberDipole, newOptexpComp, |
| 130 |
newOptexpFiberComp, optplane}, |
| 131 |
explpreset={% |
| 132 |
pos=l, width=-99pt, hsep=5mm, overhang=\codeoverhang, varwidth, |
| 133 |
vsep=\bigskipamount, rframe={}}, extendedchars=true |
| 134 |
}% |
| 135 |
\lstdefinestyle{example}{explpreset={% |
| 136 |
escapechar=*, pos=l, width=-99pt, hsep=5mm, overhang=\codeoverhang, |
| 137 |
varwidth, vsep=\bigskipamount, rframe={}}} |
| 138 |
\makeatletter |
| 139 |
\providecommand\ON{% |
| 140 |
\gdef\lst@alloverstyle##1{\textcolor{black!50}{\strut##1}% |
| 141 |
}} |
| 142 |
\providecommand\OFF{\xdef\lst@alloverstyle##1{##1}} |
| 143 |
\makeatother |
| 144 |
\colorlet{sectioncolor}{DOrange} |
| 145 |
\addtokomafont{sectioning}{\color{sectioncolor}} |
| 146 |
\usepackage[automark,markcase=ignorenouppercase]{scrlayer-scrpage} |
| 147 |
\pagestyle{scrheadings} |
| 148 |
\clearmainofpairofpagestyles |
| 149 |
\clearplainofpairofpagestyles |
| 150 |
\ohead{\pagemark} |
| 151 |
\ihead{\headmark} |
| 152 |
\ofoot[\pagemark]{} |
| 153 |
\automark[subsection]{section} |
| 154 |
\setkomafont{headsepline}{\color{DOrange}} |
| 155 |
\DeclareTOCStyleEntry[level=0, numwidth=2.0em]{default}{chapter} |
| 156 |
\DeclareTOCStyleEntry[level=1, indent=1.5em, numwidth=3.0em]{default}{section} |
| 157 |
\DeclareTOCStyleEntry[level=2, indent=3.8em, numwidth=4.0em]{default}{subsection} |
| 158 |
\makeatletter |
| 159 |
\newrobustcmd*{\fnurl}[1][]{\hyper@normalise\ltd@fnurl{#1}} |
| 160 |
\def\ltd@fnurl#1#2{\footnote{#1\hyper@linkurl{\Hurl{#2}}{#2}}} |
| 161 |
\newrobustcmd*{\arxivurl}[1]{\href{http://arxiv.org/abs/#1}{arXiv:#1}} |
| 162 |
\newrobustcmd*{\doiurl}[1]{\href{http://dx.doi.org/#1}{DOI:#1}} |
| 163 |
\makeatother |
| 164 |
\usepackage{csquotes} |
| 165 |
\MakeAutoQuote{«}{»} |
| 166 |
%^^A spot is used in ltxdockit.sty |
| 167 |
\colorlet{spot}{sectioncolor} |
| 168 |
\newpsstyle{Refline}{linecolor=gray!70} |
| 169 |
\newpsstyle{CenterNode}{linecolor=blue, dotstyle=x, dotscale=1.5} |
| 170 |
\psset[optexp]{usefiberstyle} |
| 171 |
\colorlet{Refline}{gray!70} |
| 172 |
%^^A Fonts definitions used in ltxdockit.sty |
| 173 |
\renewcommand*{\verbatimfont}{\ttfamily} |
| 174 |
\renewcommand*{\displayverbfont}{\ttfamily} |
| 175 |
\renewcommand*{\marglistfont}{\spotcolor\sffamily\small} |
| 176 |
\renewcommand*{\margnotefont}{\sffamily\small} |
| 177 |
\renewcommand*{\optionlistfont}{\spotcolor\sffamily\displayverbfont} |
| 178 |
\renewcommand*{\ltxsyntaxfont}{\ttfamily} |
| 179 |
\renewcommand*{\ltxsyntaxlabelfont}{\spotcolor\displayverbfont} |
| 180 |
\renewcommand*{\changelogfont}{\normalfont} |
| 181 |
\renewcommand*{\changeloglabelfont}{\spotcolor\sffamily\bfseries} |
| 182 |
|
| 183 |
\makeatletter |
| 184 |
%^^A an idea from GL to provide links inside the listings to the pst-optexp commands: |
| 185 |
%^^A <https://groups.google.com/groups/search?as_umsgid=4d89ee49%240%2418590%24426a74cc%40news.free.fr> |
| 186 |
\providerobustcmd*\ifrefundefined [1]{% |
| 187 |
\begingroup% |
| 188 |
\csname @safe@activestrue\endcsname% |
| 189 |
\expandafter\endgroup\csname @\ifodd |
| 190 |
\ifcsname r@comp:#1\endcsname 1\else |
| 191 |
\ifcsname r@prm:#1\endcsname 1\else |
| 192 |
\ifcsname r@cs:#1\endcsname 1\else |
| 193 |
\ifcsname r@sty:#1\endcsname 1\else 0 |
| 194 |
\fi\fi\fi\fi second\else first\fi oftwo\endcsname |
| 195 |
}% \ifrefundefined |
| 196 |
\def\lsthk@OutputBox@H@@k{% |
| 197 |
\begingroup% |
| 198 |
\let\lst@UM\@empty% |
| 199 |
\edef\@tempc{\detokenize\expandafter{\the\lst@token }}%\edef |
| 200 |
\ifrefundefined{\@tempc}% |
| 201 |
\endgroup% |
| 202 |
\sethyperlistings% |
| 203 |
}% \lsthk@OutputBox@H@@k |
| 204 |
\def\sethyperlistings {\global\let \hyperlistingsreference =\@tempc |
| 205 |
\endgroup \aftergroup \dohyperlistings }% after \hbox |
| 206 |
\def\dohyperlistings {\def\lst@alloverstyle ##1{\hyperlistings ##1}} |
| 207 |
\def\hyperlistings{% |
| 208 |
\setbox\@tempboxa\hbox% |
| 209 |
\bgroup% |
| 210 |
\rlap{\hypersetup {linkcolor=.}\relax\fboxrule\z@% |
| 211 |
\ifcsdef{r@prm:\hyperlistingsreference}% |
| 212 |
{\hyperref[prm:\hyperlistingsreference]{\xLkeyword{\hyperlistingsreference}\boxframe{\wd\@tempboxa}{\ht\@tempboxa}{\dp\@tempboxa}}}% |
| 213 |
{\ifcsdef{r@comp:\hyperlistingsreference}% |
| 214 |
{\hyperref[comp:\hyperlistingsreference]{\xLcomp{\hyperlistingsreference}\boxframe{\wd\@tempboxa}{\ht\@tempboxa}{\dp\@tempboxa}}}% |
| 215 |
{\ifcsdef{r@sty:\hyperlistingsreference}% |
| 216 |
{\hyperref[sty:\hyperlistingsreference]{\xLstyle{\hyperlistingsreference}\boxframe{\wd\@tempboxa}{\ht\@tempboxa}{\dp\@tempboxa}}}% |
| 217 |
{\hyperref[cs:\hyperlistingsreference]{\xLcs{\hyperlistingsreference}\boxframe{\wd\@tempboxa}{\ht\@tempboxa}{\dp\@tempboxa}}}}}}% |
| 218 |
\unhbox\@tempboxa% |
| 219 |
\egroup% |
| 220 |
}% \hyperlistings |
| 221 |
\let\lsthk@OutputBox\lsthk@OutputBox@H@@k |
| 222 |
|
| 223 |
\renewenvironment*{ltxsyntax} |
| 224 |
{\list{}{% |
| 225 |
\setlength{\labelwidth}{\marglistwidth}% |
| 226 |
\setlength{\labelsep}{0pt}% |
| 227 |
\setlength{\leftmargin}{0pt}% |
| 228 |
\renewcommand*{\makelabel}[1]{% |
| 229 |
\hss\ltxsyntaxfont\ltxsyntaxlabelfont##1}}% |
| 230 |
\let\cmditem\POE@cmditem |
| 231 |
\let\envitem\ltd@envitem |
| 232 |
\let\compitem\POE@compitem} |
| 233 |
{\endlist} |
| 234 |
|
| 235 |
\newenvironment*{stylelist} |
| 236 |
{\list{}{% |
| 237 |
\setlength{\labelwidth}{\marglistwidth}% |
| 238 |
\setlength{\labelsep}{0.5\marglistsep}% |
| 239 |
\setlength{\leftmargin}{0pt}% |
| 240 |
\renewcommand*{\makelabel}[1]{\hss\optionlistfont##1}}% |
| 241 |
\let\styleitem\POE@styleitem |
| 242 |
\let\typeitem\POE@typeitem}% |
| 243 |
{\endlist} |
| 244 |
|
| 245 |
\def\ltd@optionlist{% |
| 246 |
\let\optitem\POE@optitem |
| 247 |
\let\valitem\POE@valitem |
| 248 |
\let\choitem\POE@choitem |
| 249 |
\let\boolitem\POE@boolitem |
| 250 |
\let\intitem\POE@intitem |
| 251 |
\let\numitem\POE@numitem |
| 252 |
\let\psnumitem\POE@psnumitem |
| 253 |
\let\poeitem\ltd@item |
| 254 |
\let\styleitem\POE@styleitem |
| 255 |
\let\typeitem\POE@typeitem} |
| 256 |
|
| 257 |
\def\POE@styleitem{% |
| 258 |
\@ifnextchar[%] |
| 259 |
{\POE@styleitem@i} |
| 260 |
{\POE@styleitem@i[]}} |
| 261 |
\def\POE@styleitem@i[#1]#2{% |
| 262 |
\item[{#2}]% |
| 263 |
\label{sty:#2}\xdefLstyle{#2}% |
| 264 |
\begingroup\raggedright |
| 265 |
\prm{psstyle}% |
| 266 |
\settowidth\@tempdimb{\prm{psstyle}}% |
| 267 |
\settowidth\@tempdimc{#2}% |
| 268 |
\@tempdimc=\dimexpr\@tempdimc+\labelsep-\labelwidth\relax |
| 269 |
\ifdim\@tempdimc>0pt% |
| 270 |
\@tempdima=\dimexpr\linewidth-\@tempdimb-\@tempdimc-1em\relax |
| 271 |
\else |
| 272 |
\@tempdima=\dimexpr\linewidth-\@tempdimb-1em\relax |
| 273 |
\fi |
| 274 |
\ifblank{#1}{}{\hfill\parbox[t]{\@tempdima}{\raggedleft default:~\ltd@textverb{#1}}}% |
| 275 |
\par\endgroup} |
| 276 |
|
| 277 |
\def\POE@typeitem#1#2{% |
| 278 |
\item[{#1}]% |
| 279 |
\label{prm:#1}\docindexdef{#1=\nxLkeyword{#1}}% |
| 280 |
\begingroup\raggedright |
| 281 |
#2% |
| 282 |
\settowidth\@tempdimb{\prm{psstyle}}% |
| 283 |
\settowidth\@tempdimc{#1}% |
| 284 |
\@tempdimc=\dimexpr\@tempdimc+\labelsep-\labelwidth\relax |
| 285 |
\ifdim\@tempdimc>0pt% |
| 286 |
\@tempdima=\dimexpr\linewidth-\@tempdimb-\@tempdimc-1em\relax |
| 287 |
\else |
| 288 |
\@tempdima=\dimexpr\linewidth-\@tempdimb-1em\relax |
| 289 |
\fi |
| 290 |
\par\endgroup} |
| 291 |
|
| 292 |
\def\POE@option#1#2#3{% |
| 293 |
\item[#1]% |
| 294 |
\begingroup\raggedright |
| 295 |
\ltd@textverb{=}% |
| 296 |
\settowidth\@tempdimb{\ltd@textverb{=}}% |
| 297 |
\settowidth\@tempdimc{#1}% |
| 298 |
\@tempdimc=\dimexpr\labelwidth-\@tempdimc\relax |
| 299 |
\ifdim\@tempdimc<0pt |
| 300 |
\@tempdima=\dimexpr\linewidth-\@tempdimb+\@tempdimc-2em\relax |
| 301 |
\else |
| 302 |
\@tempdima=\dimexpr\linewidth-\@tempdimb-2em\relax |
| 303 |
\fi |
| 304 |
\ifblank{#3} |
| 305 |
{} |
| 306 |
{\settowidth\@tempdimb{default: #3}% |
| 307 |
\@tempdima=\dimexpr\@tempdima-\@tempdimb-2em\relax}% |
| 308 |
\parbox[t]{\@tempdima}{\raggedright #2}% |
| 309 |
\ifblank{#3} |
| 310 |
{} |
| 311 |
{\hfill default:~#3}% |
| 312 |
\par\endgroup |
| 313 |
\nobreak\vspace{\itemsep}} |
| 314 |
|
| 315 |
\def\POE@optitem{% |
| 316 |
\@ifstar |
| 317 |
{\boolfalse{@tempswa}\POE@optitem@i} |
| 318 |
{\booltrue{@tempswa}\POE@optitem@i}} |
| 319 |
\newcommand*{\POE@optitem@i}[3][]{% |
| 320 |
\ifbool{@tempswa}% |
| 321 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 322 |
{\xLkeyword{#2}}% |
| 323 |
\ifblank{#1} |
| 324 |
{\POE@option{#2}{#3}{}} |
| 325 |
{\POE@option{#2}{#3}{\ltd@textverb{#1}}}}% |
| 326 |
|
| 327 |
\def\POE@valitem{% |
| 328 |
\@ifstar |
| 329 |
{\boolfalse{@tempswa}\POE@valitem@i} |
| 330 |
{\booltrue{@tempswa}\POE@valitem@i}} |
| 331 |
\newcommand*{\POE@valitem@i}[3][]{% |
| 332 |
\ifbool{@tempswa}% |
| 333 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 334 |
{\xLkeyword{#2}}% |
| 335 |
\ifblank{#1} |
| 336 |
{\POE@option{#2}{\prm{#3}}{}} |
| 337 |
{\POE@option{#2}{\prm{#3}}{\ltd@textverb{#1}}}}% |
| 338 |
|
| 339 |
\def\POE@choitem{% |
| 340 |
\@ifstar |
| 341 |
{\boolfalse{@tempswa}\POE@choitem@i} |
| 342 |
{\booltrue{@tempswa}\POE@choitem@i}} |
| 343 |
\newcommand*{\POE@choitem@i}[3][]{% |
| 344 |
\ifbool{@tempswa}% |
| 345 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 346 |
{\xLkeyword{#2}}% |
| 347 |
\ifblank{#1} |
| 348 |
{\POE@option{#2}{\ltd@verblist{#3}}{}} |
| 349 |
{\POE@option{#2}{\ltd@verblist{#3}}{\ltd@textverb{#1}}}}% |
| 350 |
|
| 351 |
\def\POE@boolitem{% |
| 352 |
\@ifstar |
| 353 |
{\boolfalse{@tempswa}\POE@boolitem@i} |
| 354 |
{\booltrue{@tempswa}\POE@boolitem@i}} |
| 355 |
\newcommand*{\POE@boolitem@i}[2][]{% |
| 356 |
\ifbool{@tempswa}% |
| 357 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 358 |
{\xLkeyword{#2}}% |
| 359 |
\ifblank{#1} |
| 360 |
{\POE@option{#2}{\ltd@verblist{true,false}}{}} |
| 361 |
{\POE@option{#2}{\ltd@verblist{true,false}}{\ltd@textverb{#1}}}}% |
| 362 |
|
| 363 |
\def\POE@intitem{% |
| 364 |
\@ifstar |
| 365 |
{\boolfalse{@tempswa}\POE@intitem@i} |
| 366 |
{\booltrue{@tempswa}\POE@intitem@i}} |
| 367 |
\newcommand*{\POE@intitem@i}[2][]{% |
| 368 |
\ifbool{@tempswa}% |
| 369 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 370 |
{\xLkeyword{#2}}% |
| 371 |
\ifblank{#1} |
| 372 |
{\POE@option{#2}{\prm{int}}{}} |
| 373 |
{\POE@option{#2}{\prm{int}}{\ltd@textverb{#1}}}}% |
| 374 |
|
| 375 |
\def\POE@numitem{% |
| 376 |
\@ifstar |
| 377 |
{\boolfalse{@tempswa}\POE@numitem@i} |
| 378 |
{\booltrue{@tempswa}\POE@numitem@i}} |
| 379 |
\newcommand*{\POE@numitem@i}[2][]{% |
| 380 |
\ifbool{@tempswa}% |
| 381 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 382 |
{\xLkeyword{#2}}% |
| 383 |
\ifblank{#1} |
| 384 |
{\POE@option{#2}{\prm{num}}{}} |
| 385 |
{\POE@option{#2}{\prm{num}}{\ltd@textverb{#1}}}}% |
| 386 |
|
| 387 |
\def\POE@psnumitem{% |
| 388 |
\@ifstar |
| 389 |
{\boolfalse{@tempswa}\POE@psnumitem@i} |
| 390 |
{\booltrue{@tempswa}\POE@psnumitem@i}} |
| 391 |
\newcommand*{\POE@psnumitem@i}[2][]{% |
| 392 |
\ifbool{@tempswa}% |
| 393 |
{\label{prm:#2}\xdefLkeyword{#2}}% |
| 394 |
{\xLkeyword{#2}}% |
| 395 |
\ifblank{#1} |
| 396 |
{\POE@option{#2}{\prm{psnum}}{}} |
| 397 |
{\POE@option{#2}{\prm{psnum}}{\ltd@textverb{#1}}}}% |
| 398 |
|
| 399 |
\def\ltd@csitem{% |
| 400 |
\@ifstar |
| 401 |
{\boolfalse{@tempswa}\ltd@csitem@i} |
| 402 |
{\booltrue{@tempswa}\ltd@csitem@i}} |
| 403 |
\def\ltd@csitem@i#1{% |
| 404 |
\ifbool{@tempswa} |
| 405 |
{\ltd@item@ii{\textbackslash#1\hspace\marglistsep}{#1}} |
| 406 |
{\ltd@item@ii{\textbackslash#1\hspace\marglistsep}{}}} |
| 407 |
|
| 408 |
\def\POE@cmditem{% |
| 409 |
\@ifstar |
| 410 |
{\boolfalse{@tempswa}\POE@cmditem@i} |
| 411 |
{\booltrue{@tempswa}\POE@cmditem@i}} |
| 412 |
\def\POE@cmditem@i#1{% |
| 413 |
\ifbool{@tempswa} |
| 414 |
{\POE@cmditem@ii{\textbackslash#1}{cs:#1}} |
| 415 |
{\POE@cmditem@ii{\textbackslash#1}{}}} |
| 416 |
\def\POE@compitem{% |
| 417 |
\@ifstar |
| 418 |
{\boolfalse{@tempswa}\POE@compitem@i} |
| 419 |
{\booltrue{@tempswa}\POE@compitem@i}} |
| 420 |
\def\POE@compitem@i#1{% |
| 421 |
\ifbool{@tempswa} |
| 422 |
{\POE@cmditem@ii{\textbackslash#1}{comp:#1}} |
| 423 |
{\POE@cmditem@ii{\textbackslash#1}{}}} |
| 424 |
\def\POE@cmditem@ii#1#2{% |
| 425 |
\ltd@itemsave |
| 426 |
\ifhmode |
| 427 |
\itemsep-\topsep |
| 428 |
\else |
| 429 |
\ltd@itembreak |
| 430 |
\fi |
| 431 |
\item[#1]% |
| 432 |
\ltd@itemrest |
| 433 |
\ifblank{#2}{}{\label{#2}}% |
| 434 |
\begingroup |
| 435 |
\ltd@syntaxsetup |
| 436 |
\ltxsyntaxfont |
| 437 |
\let\@tempa\@empty |
| 438 |
\ltd@parseargs} |
| 439 |
|
| 440 |
\def\ltd@csitem@ii#1#2{% |
| 441 |
\ltd@itemsave |
| 442 |
\ifhmode |
| 443 |
\itemsep-\topsep |
| 444 |
\else |
| 445 |
\ltd@itembreak |
| 446 |
\fi |
| 447 |
\item[#1]% |
| 448 |
\ltd@itemrest |
| 449 |
\ifblank{#2}{}{\label{cs:#2}}% |
| 450 |
\begingroup |
| 451 |
\ltd@syntaxsetup |
| 452 |
\ltxsyntaxfont |
| 453 |
\let\@tempa\@empty |
| 454 |
\ltd@parseargs} |
| 455 |
|
| 456 |
|
| 457 |
\let\plainllap\llap |
| 458 |
\newrobustcmd\macro@llap[1]{{\global\let\llap\plainllap |
| 459 |
\setbox0=\hbox\bgroup \macro@font\small\saved@macroname\egroup |
| 460 |
\ifdim\wd0>30mm |
| 461 |
\hbox to\z@ \bgroup\hss \hbox to30mm{\unhcopy0\hss}\egroup |
| 462 |
\edef\@tempa{\hskip\dimexpr\the\wd0-30mm}\global\everypar\expandafter{\the\expandafter\everypar |
| 463 |
\@tempa \global\everypar{}}% |
| 464 |
\else \llap{\unhbox0}\fi}} |
| 465 |
\AtBeginEnvironment{macro}{\let\llap\macro@llap} |
| 466 |
\makeatother |
| 467 |
|
| 468 |
\newcommand*{\PSstring}[1]{{\normalfont\small\ttfamily(#1)}} |
| 469 |
\newcommand*{\PSarray}[1]{{\normalfont\small\ttfamily[#1]}} |
| 470 |
\newcommand*{\PSname}[1]{{\normalfont\small\ttfamily/#1}} |
| 471 |
\newcommand*{\PSproc}[1]{{\normalfont\small\ttfamily\textbraceleft #1\textbraceright}} |
| 472 |
\newcommand*{\PSvar}[1]{{\normalfont\small\ttfamily #1}} |
| 473 |
\newcommand*{\PSop}[1]{{\normalfont\small\ttfamily\color{DOrange}\hskip 3pt #1\hskip 3pt}} |
| 474 |
|
| 475 |
\newcommand*{\compref}[1]{\ref{comp:#1}} |
| 476 |
\newcommand*{\hyperpagedef}[1]{\textbf{\hyperpage{#1}}} |
| 477 |
\newcommand*{\nodename}[1]{\emph{#1}} |
| 478 |
\newcommand*{\param}[1]{\normalfont\texttt{#1}} |
| 479 |
\newcommand*{\paramvalue}[1]{\texttt{#1}} |
| 480 |
\newcommand*{\styleshape}[1]{\texttt{#1}} |
| 481 |
\newcommand{\docindex}[1]{\sindex[doc]{#1|hyperpage}} |
| 482 |
\newcommand{\docindexdef}[1]{\sindex[doc]{#1|hyperpagedef}} |
| 483 |
\makeatletter |
| 484 |
\def\Lcs{\@ifstar{\Lcs@nobm}{\Lcs@bm}} |
| 485 |
\def\Lcs@nobm#1{\nxLcs{#1}\xLcs{#1}} |
| 486 |
\def\Lcs@bm#1{\hyperref[cs:#1]{\Lcs@nobm{#1}}} |
| 487 |
\def\xLcs#1{\docindex{#1=\nxLcs{#1}}\docindex{\POEindexMacro!#1=\nxLcs{#1}}} |
| 488 |
\def\nxLcs#1{\texttt{\textbackslash#1}} |
| 489 |
|
| 490 |
\def\Lcomp{\@ifstar{\Lcomp@nobm}{\Lcomp@bm}} |
| 491 |
\def\Lcomp@nobm#1{\nxLcomp{#1}\xLcomp{#1}} |
| 492 |
\def\Lcomp@bm#1{\hyperref[comp:#1]{\Lcomp@nobm{#1}}} |
| 493 |
\def\xLcomp#1{\docindex{#1=\nxLcomp{#1}}\docindex{\POEindexComp!#1=\nxLcomp{#1}}} |
| 494 |
\def\nxLcomp#1{\texttt{\textbackslash#1}} |
| 495 |
|
| 496 |
\def\LPack#1{\nxLPack{#1}\docindex{#1=\nxLPack{#1}}\docindex{\POEindexPack!#1=\nxLPack{#1}}} |
| 497 |
\def\nxLPack#1{\texttt{#1}} |
| 498 |
|
| 499 |
\def\Lenv{\@ifstar{\Lenv@nobm}{\Lenv@bm}} |
| 500 |
\def\Lenv@nobm#1{\nxLenv{#1}\xLenv{#1}} |
| 501 |
\def\Lenv@bm#1{\hyperref[env:#1]{\Lenv@nobm{#1}}} |
| 502 |
\def\xLenv#1{\docindex{#1=\nxLenv{#1}}\docindex{\POEindexEnv!#1=\nxLenv{#1}}} |
| 503 |
\def\nxLenv#1{\texttt{#1}} |
| 504 |
\let\orig@ltd@envitem\ltd@envitem |
| 505 |
\def\ltd@envitem#1{\orig@ltd@envitem{#1}\label{env:#1}\xLenv{#1}} |
| 506 |
|
| 507 |
\def\Lkeyword{\@ifstar{\Lkeyword@nobm}{\Lkeyword@bm}} |
| 508 |
\def\Lkeyword@nobm#1{\nxLkeyword{#1}\xLkeyword{#1}} |
| 509 |
\def\Lkeyword@bm#1{\hyperref[prm:#1]{\Lkeyword@nobm{#1}}} |
| 510 |
\def\xLkeyword#1{\docindex{#1=\nxLkeyword{#1}}\docindex{\POEindexKeyword!#1=\nxLkeyword{#1}}} |
| 511 |
\def\xdefLkeyword#1{\docindexdef{#1=\nxLkeyword{#1}}\docindexdef{\POEindexKeyword!#1=\nxLkeyword{#1}}} |
| 512 |
\def\nxLkeyword#1{\texttt{#1}} |
| 513 |
|
| 514 |
\def\xLoption#1{\docindex{#1=\texttt{#1}}} |
| 515 |
\def\Loption#1{\texttt{#1}\xLoption{#1}} |
| 516 |
\def\nxLoption#1{\texttt{#1}} |
| 517 |
|
| 518 |
\def\Lstyle{\@ifstar{\Lstyle@nobm}{\Lstyle@bm}} |
| 519 |
\def\Lstyle@nobm#1{\nxLstyle{#1}\xLstyle{#1}} |
| 520 |
\def\Lstyle@bm#1{\hyperref[sty:#1]{\Lstyle@nobm{#1}}} |
| 521 |
\def\xLstyle#1{\docindex{#1=\nxLstyle{#1}}\docindex{\POEindexStyle!#1=\nxLstyle{#1}}} |
| 522 |
\def\xdefLstyle#1{\docindexdef{#1=\nxLstyle{#1}}\docindexdef{\POEindexStyle!#1=\nxLstyle{#1}}} |
| 523 |
\def\nxLstyle#1{\texttt{#1}} |
| 524 |
|
| 525 |
\def\Ldipole#1{\nxLcs{#1}\xLdipole{#1}} |
| 526 |
\def\xLdipole#1{\docindexdef{#1=\nxLcs{#1}}\docindexdef{\POEindexComp!#1=\nxLcs{#1}}} |
| 527 |
|
| 528 |
\def\Ltripole#1{\nxLcs{#1}\xLtripole{#1}} |
| 529 |
\def\xLtripole#1{\docindexdef{#1=\nxLcs{#1}}\docindexdef{\POEindexComp!#1=\nxLcs{#1}}} |
| 530 |
|
| 531 |
\def\Lfdipole#1{\nxLcs{#1}\xLfdipole{#1}} |
| 532 |
\def\xLfdipole#1{\docindexdef{#1=\nxLcs{#1}}\docindexdef{\POEindexComp!#1=\nxLcs{#1}}} |
| 533 |
|
| 534 |
\def\Lfmultipole#1{\nxLcs{#1}\xLfmultipole{#1}} |
| 535 |
\def\xLfmultipole#1{\docindexdef{#1=\nxLcs{#1}}\docindexdef{\POEindexComp!#1=\nxLcs{#1}}} |
| 536 |
|
| 537 |
\def\Lemultipole#1{\nxLcs{#1}\xLemultipole{#1}} |
| 538 |
\def\xLemultipole#1{\docindexdef{#1=\nxLcs{#1}}\docindexdef{\POEindexComp!#1=\nxLcs{#1}}} |
| 539 |
\makeatother |
| 540 |
|
| 541 |
\newcommand{\dipoledesc}[1]{% |
| 542 |
\xLdipole{#1}% |
| 543 |
\compitem{#1}[options](in)(out){label}% |
| 544 |
} |
| 545 |
\newcommand{\tripoledesc}[1]{% |
| 546 |
\xLtripole{#1}% |
| 547 |
\compitem{#1}[options](in)(center)(out){label}% |
| 548 |
} |
| 549 |
|
| 550 |
\newcommand{\fiberdipoledesc}[1]{% |
| 551 |
\xLfdipole{#1}% |
| 552 |
\compitem{#1}[options](in)(out){label}% |
| 553 |
} |
| 554 |
|
| 555 |
\newenvironment*{pssyntax} |
| 556 |
{\list{}{\small |
| 557 |
\setlength{\labelsep}{0pt}% |
| 558 |
\setlength{\leftmargin}{10pt}% |
| 559 |
\item[]}} |
| 560 |
{\endlist} |
| 561 |
|
| 562 |
\newcommand{\psarglistfont}{\small} |
| 563 |
\newenvironment*{psarglist} |
| 564 |
{\list{}{% |
| 565 |
\setlength{\labelwidth}{10pt}% |
| 566 |
\setlength{\labelsep}{0pt}% |
| 567 |
\setlength{\leftmargin}{0pt}% |
| 568 |
\setlength{\itemsep}{\parsep}% |
| 569 |
\setlength{\parsep}{0pt}% |
| 570 |
\renewcommand*{\makelabel}[1]{\hss\psarglistfont##1}}} |
| 571 |
{\endlist} |
| 572 |
|
| 573 |
\makeatletter |
| 574 |
\renewenvironment{theglossary}{\GlossaryParms \let\item\@idxitem \ignorespaces}{} |
| 575 |
\makeatother |
| 576 |
\def\psargitem#1{\item[#1]\hfill\par\nobreak} |
| 577 |
|
| 578 |
\addtopsstyle{Fiber}{linecolor=DOrange,linewidth=1.5\pslinewidth} |
| 579 |
\addtopsstyle{Beam}{linewidth=1.5\pslinewidth} |
| 580 |
\EnableCrossrefs |
| 581 |
\CodelineIndex |
| 582 |
\OnlyDescription |
| 583 |
\begin{document} |
| 584 |
\DocInput{pst-optexp.dtx} |
| 585 |
\end{document} |
| 586 |
%</driver> |
| 587 |
% \fi |
| 588 |
% |
| 589 |
% \CheckSum{0} |
| 590 |
% |
| 591 |
% \CharacterTable |
| 592 |
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 593 |
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 594 |
% Digits \0\1\2\3\4\5\6\7\8\9 |
| 595 |
% Exclamation \! Double quote \" Hash (number) \# |
| 596 |
% Dollar \$ Percent \% Ampersand \& |
| 597 |
% Acute accent \' Left paren \( Right paren \) |
| 598 |
% Asterisk \* Plus \+ Comma \, |
| 599 |
% Minus \- Point \. Solidus \/ |
| 600 |
% Colon \: Semicolon \; Less than \< |
| 601 |
% Equals \= Greater than \> Question mark \? |
| 602 |
% Commercial at \@ Left bracket \[ Backslash \\ |
| 603 |
% Right bracket \] Circumflex \^ Underscore \_ |
| 604 |
% Grave accent \` Left brace \{ Vertical bar \| |
| 605 |
% Right brace \} Tilde \~} |
| 606 |
% |
| 607 |
% \GetFileInfo{pst-optexp.dtx} |
| 608 |
% |
| 609 |
% \DoNotIndex{\@,\g@addto@macro,\newif,\gdef,\xdef,\newcounter,\or,\ifcase,\\} |
| 610 |
% \DoNotIndex{\newcommand,\newenvironment,\def,\edef,\let,\if,\ifx,\else,\fi,\@ifnextchar} |
| 611 |
% \DoNotIndex{\space,\relax,\nr,\val,\ignorespaces,\ifdim,\ifcat,\@nil,\@none,\@empty} |
| 612 |
% \DoNotIndex{\PackageError,\PackageWarning,\advance,\csname,\endcsname,\bgroup,\egroup} |
| 613 |
% \DoNotIndex{\expandafter,\POE@comp,\@postcode} |
| 614 |
% \DoNotIndex{\psset} |
| 615 |
% \DoNotIndex{\@wd,\@sz,\@ht,\@yshift,\@step,\@xl,\@sep,\@r,\@dp,\@altan,\@extpostcode} |
| 616 |
% \DoNotIndex{\@f@cnt,\@f@r,\@f@sep,\@hshift,\@bs@wd,\@c@caxisL,\@cnt,\@pstfalse,\@psttrue} |
| 617 |
% \DoNotIndex{\@th,\@rL,\@rR,\i,\long,\optexp@nodeA,\optexp@nodeB} |
| 618 |
% \DoNotIndex{\POE@temp,\POE@tempa,\POE@tempb,\POE@tempc,\POE@tempd} |
| 619 |
% \DoNotIndex{\POE@getref@b,\POE@getref@c,\POE@getref@l,\POE@getref@r,\POE@getref@t} |
| 620 |
% \DoNotIndex{\the,\toks@} |
| 621 |
% |
| 622 |
% \newif\ifGERMAN \GERMANfalse |
| 623 |
% \newif\ifENGLISH \ENGLISHfalse |
| 624 |
% \iflanguage{ngerman}{\GERMANtrue}{% |
| 625 |
% \iflanguage{german}{\GERMANtrue}{\GERMANfalse}} |
| 626 |
% \iflanguage{english}{\ENGLISHtrue}{\ENGLISHfalse} |
| 627 |
% |
| 628 |
% \ifGERMAN |
| 629 |
% \newrefformat{chap}{Kap.~\ref{#1}} |
| 630 |
% \newrefformat{sec}{Kap.~\ref{#1}} |
| 631 |
% \newrefformat{l}{Zeile~\ref{#1}} |
| 632 |
% \newrefformat{ex}{Bsp.~\ref{#1}} |
| 633 |
% \newrefformat{tab}{Tab.~\ref{#1}} |
| 634 |
% \newrefformat{fig}{Abb.~\ref{#1}} |
| 635 |
% \newindex[Quelltextindex]{idx} |
| 636 |
% \newindex[Dokumentationsindex]{doc} |
| 637 |
% \newcommand{\POEindexComp}{Komponenten} |
| 638 |
% \newcommand{\POEindexStyle}{Stile} |
| 639 |
% \newcommand{\POEindexMacro}{Makros} |
| 640 |
% \newcommand{\POEindexKeyword}{Parameter} |
| 641 |
% \newcommand{\POEindexEnv}{Umgebungen} |
| 642 |
% \newcommand{\POEindexPack}{Pakete} |
| 643 |
% \renewcommand*\lstlistingname{Bsp.} |
| 644 |
% \fi |
| 645 |
% \ifENGLISH |
| 646 |
% \newrefformat{chap}{Sec.~\ref{#1}} |
| 647 |
% \newrefformat{sec}{Sec.~\ref{#1}} |
| 648 |
% \newrefformat{l}{Line~\ref{#1}} |
| 649 |
% \newrefformat{ex}{Ex.~\ref{#1}} |
| 650 |
% \newrefformat{tab}{Tab.~\ref{#1}} |
| 651 |
% \newrefformat{fig}{Fig.~\ref{#1}} |
| 652 |
% \newindex[Code index]{idx} |
| 653 |
% \newindex[Documentation index]{doc} |
| 654 |
% \newcommand{\POEindexComp}{components} |
| 655 |
% \newcommand{\POEindexStyle}{styles} |
| 656 |
% \newcommand{\POEindexMacro}{macros} |
| 657 |
% \newcommand{\POEindexKeyword}{parameters} |
| 658 |
% \newcommand{\POEindexEnv}{environments} |
| 659 |
% \newcommand{\POEindexPack}{packages} |
| 660 |
% \renewcommand*\lstlistingname{Ex.} |
| 661 |
% \fi |
| 662 |
% |
| 663 |
% \newcommand{\refpointexplanation}{% |
| 664 |
% \ifGERMAN |
| 665 |
% Analog zum Referenzpunkt von \nxLcs{rput}, kann jede Kombination von |
| 666 |
% \opt{c} (mittig), \opt{t} (oben), \opt{b} (unten), \opt{l} (links) und |
| 667 |
% \opt{r} (rechts) sein. |
| 668 |
% \fi |
| 669 |
% \ifENGLISH |
| 670 |
% Like the reference point of \nxLcs{rput}, can be any comination of |
| 671 |
% \opt{c} (center), \opt{t} (top), \opt{b} (bottom), \opt{l} (left), and |
| 672 |
% \opt{r} (right). |
| 673 |
% \fi} |
| 674 |
% |
| 675 |
% \newcommand*{\linewidthexplanation}[2]{% |
| 676 |
% \ifGERMAN |
| 677 |
% Die Linienbreite #1. Diese könnte ebenfalls über den |
| 678 |
% \opt{linewidth} Parameter gesetzt werden. Mit diesem Parameter kann |
| 679 |
% aber die Linienbreite aller #2 global eingestellt werden. |
| 680 |
% \fi |
| 681 |
% \ifENGLISH |
| 682 |
% The linewidth of the #1. This could be defined also with the |
| 683 |
% generic \opt{linewidth} option. But this parameter allows setting |
| 684 |
% globally the linewidth of all #2. |
| 685 |
% \fi |
| 686 |
% } |
| 687 |
% |
| 688 |
% \newcommand*{\deprecatedmsg}[2][3.0]{% |
| 689 |
% \ifGERMAN Dieser Parameter ist seit Version #1 veraltet, verwenden Sie stattdessen #2. \fi |
| 690 |
% \ifENGLISH This parameter is deprecated since version #1, use #2 instead.\fi |
| 691 |
% } |
| 692 |
% |
| 693 |
% \newcommand*{\addtostylemsg}[1]{% |
| 694 |
% \ifGERMAN Der vorhandene \Lstyle{#1}-Stil wird lokal um die Parameter in |
| 695 |
% \prm{list} erweitert, \prm{list} muss mit geschweiften Klammern gekapselt |
| 696 |
% werden. |
| 697 |
% \fi |
| 698 |
% \ifENGLISH |
| 699 |
% The \Lstyle{#1} style is extended by locally adding the |
| 700 |
% parameters contained in \prm{list}. The \prm{list} must be surrounded |
| 701 |
% by curly braces. |
| 702 |
% \fi |
| 703 |
% } |
| 704 |
% \newcommand*{\newstylemsg}[1]{% |
| 705 |
% \ifGERMAN Ähnlich wie \Lkeyword{addto#1}, nur wird der |
| 706 |
% \Lstyle{#1}-Stil mit den neuen Parametern überschrieben. |
| 707 |
% \fi |
| 708 |
% \ifENGLISH Similar to \Lkeyword{addto#1}, but an existing |
| 709 |
% \Lstyle{#1} style is overwritten with the new parameter set. |
| 710 |
% \fi |
| 711 |
% } |
| 712 |
% |
| 713 |
% \makeatletter |
| 714 |
% \renewcommand\maketitle{^^A |
| 715 |
% \thispagestyle{empty}^^A |
| 716 |
% \begin{titlepage} |
| 717 |
% \begin{pspicture}(1.6in,0.685in)(10,20.5) |
| 718 |
% \psframe[fillstyle=solid,linecolor=lightgray,fillcolor=lightgray,linestyle=solid](0,-5.75)(21.5,10) |
| 719 |
% \psframe[fillstyle=solid,linecolor=Orange!85!Red,fillcolor=Orange!85!Red,linestyle=solid](0,10)(21.5,10.5) |
| 720 |
% \psframe[fillstyle=solid,linecolor=Orange!85!Red,fillcolor=Orange!85!Red,linestyle=solid](0,21.1)(21.5,21.2) |
| 721 |
% \rput[lb](3,22){\Huge\sffamily\color{Orange!65!Red}\psscalebox{2}{\textbf{PSTricks}}} |
| 722 |
% \rput[lb](3,14.1){\parbox{15cm}{\sffamily\RaggedRight\bfseries\huge\@title}} |
| 723 |
% \rput[lb](3,7.6){\parbox{13cm}{\sffamily\@date}} |
| 724 |
% \rput[lb](3,-2.6){\parbox[b]{17cm}{\sffamily\RaggedRight |
| 725 |
% ~\hfill\makebox[7cm][l]{\ifGERMAN Paketautor:\fi\ifENGLISH Package author:\fi}\\ |
| 726 |
% ~\hfill\makebox[7cm][l]{^^A |
| 727 |
% \bfseries\tabular[t]{@{}l@{}}\@author\endtabular}}} |
| 728 |
% \rput[C](11,4){\bgImage} |
| 729 |
% \end{pspicture}^^A |
| 730 |
% \end{titlepage}} |
| 731 |
% \makeatother |
| 732 |
% |
| 733 |
% \ifGERMAN |
| 734 |
% \title{\texttt{pst-optexp}\\ Optische Versuchsaufbauten\\[0.5ex] \small \fileversion} |
| 735 |
% \hypersetup{pdftitle={Optische Versuchsaufbauten}} |
| 736 |
% \fi |
| 737 |
% \ifENGLISH |
| 738 |
% \title{\texttt{pst-optexp}\\ Drawing optical experimental setups\\[0.5ex] \small \fileversion} |
| 739 |
% \hypersetup{pdftitle={Optical experimental setups}} |
| 740 |
% \fi |
| 741 |
% \author{Christoph Bersch} |
| 742 |
% \date{\filedate} |
| 743 |
% \def\bgImage{\psset{unit=1.3} |
| 744 |
% \begin{pspicture}(-0.2,0.1)(8.2,5.3) |
| 745 |
% \pnode(0,3){M1} |
| 746 |
% \pnode(8,3){M2} |
| 747 |
% \pnode(8,0.5){In} |
| 748 |
% \pnode(6.5,0.5){Min} |
| 749 |
% \pnode(6.5,3){Pin} |
| 750 |
% \pnode(4.5,3){Min2} |
| 751 |
% \pnode(1.3, 0.5){Mout} |
| 752 |
% \pnode(1.3,3){Pout} |
| 753 |
% \pnode(3.5,3){Mout2} |
| 754 |
% \pnode(0,0.5){Out} |
| 755 |
% \definecolor[ps]{bl}{rgb}{tx@addDict begin Red Green Blue end} |
| 756 |
% \addtopsstyle{Beam}{linecolor=bl, linejoin=1} |
| 757 |
% \psset{mirrortype=extended, mirrordepth=0.15} |
| 758 |
% \newpsstyle{ExtendedMirror}{linestyle=none, hatchwidth=0.5\pslinewidth, hatchsep=1.2\pslinewidth, |
| 759 |
% fillstyle=hlines} |
| 760 |
% \begin{optexp} |
| 761 |
% \mirror[mirrorwidth=4, mirrorradius=11.](M2)(M1)(M2) |
| 762 |
% \mirror[mirrorwidth=4, mirrorradius=10.4](M1)(M2)(M1) |
| 763 |
% \mirror(In)(Min)(Pin) |
| 764 |
% \optprism[n=1.85, addtoOptComp={linewidth=1.5\pslinewidth}](Min)(Pin)(Min2) |
| 765 |
% \mirror[compshift=-0.4](Pin)(Min2)(Pin) |
| 766 |
% \mirror[compshift=0.4](Pout)(Mout2)(Pout) |
| 767 |
% \optprism[n=1.85, linewidth=1.5\pslinewidth](Mout2)(Pout)(Mout) |
| 768 |
% \mirror(Pout)(Mout)(Out) |
| 769 |
% \multido{\i=0+1}{40}{^^A |
| 770 |
% \pstVerb{^^A |
| 771 |
% \i\space 650 400 sub 39 div mul 400 add |
| 772 |
% tx@addDict begin wavelengthToRGB end }^^A |
| 773 |
% \drawbeam[n={-0.002 \i\space mul n add}](In){3-5}{2}{1}{6-7} |
| 774 |
% }^^A |
| 775 |
% \newpsstyle{Beam}{linecolor=red} |
| 776 |
% \backlayer{\psline[style=Beam,ArrowInside=->, linewidth=2\pslinewidth, arrowinset=0](In)(\oenodeIn{3})(\oenodeOut{4})} |
| 777 |
% \drawbeam[linewidth=2\pslinewidth, arrows=->, arrowinset=0, loadbeampoints, beaminsidefirst, n=1.9325]{7-8}(Out) |
| 778 |
% \end{optexp} |
| 779 |
% \rput(4,4.5){^^A |
| 780 |
% \psframe[fillstyle=solid,fillcolor=gray!70](-0.1, -0.6)(0.1, 0.7) |
| 781 |
% \multido{\r=-0.5+0.1}{12}{^^A |
| 782 |
% \psline[linewidth=0.5\pslinewidth](-0.1,\r)(0.1,\r) |
| 783 |
% }^^A |
| 784 |
% } |
| 785 |
% \end{pspicture}} |
| 786 |
% |
| 787 |
% \maketitle |
| 788 |
% |
| 789 |
% \clearpage |
| 790 |
% \tableofcontents |
| 791 |
% \clearpage |
| 792 |
% |
| 793 |
% \ifGERMAN |
| 794 |
% \chapter{Einführung} |
| 795 |
% \fi |
| 796 |
% \ifENGLISH |
| 797 |
% \chapter{Introduction} |
| 798 |
% \fi |
| 799 |
% |
| 800 |
% \ifGERMAN |
| 801 |
% \section{Über das Paket} |
| 802 |
% |
| 803 |
% \LPack{pst-optexp} ist ein PSTricks-Paket zum Skizzieren optischer |
| 804 |
% Versuchsaufbauten. Dafür werden viele unterschiedliche Freistrahl- und |
| 805 |
% Faserkomponenten bereitgestellt, deren Ausrichtung, Positionierung und |
| 806 |
% Beschriftung einfach und flexibel eingestellt werden kann. Die Komponenten |
| 807 |
% können dann mit Fasern oder Lichtstrahlen verbunden werden, wobei auch |
| 808 |
% realistische Strahlengänge mit Raytracing möglich sind. |
| 809 |
% \fi |
| 810 |
% \ifENGLISH |
| 811 |
% \section{About the package} |
| 812 |
% The package \LPack{pst-optexp} is a collection of optical components that |
| 813 |
% facilitate easy sketching of optical experimental setups. A lot of different |
| 814 |
% free-ray and fiber components are provided, which alignment, positioning and |
| 815 |
% labelling can be achieved in very simple and flexible ways. The components |
| 816 |
% can be connected with fibers or beams, realistic raytraced beam paths are |
| 817 |
% also possible. |
| 818 |
% \fi |
| 819 |
% |
| 820 |
% \ifGERMAN |
| 821 |
% \section{Anforderungen} |
| 822 |
% \LPack{pst-optexp} benötigt \LaTeX{} und aktuelle Versionen der |
| 823 |
% Pakete \LPack{pstricks} ($\geq 2.53$), \LPack{pst-plot} ($\geq |
| 824 |
% 1.6.1$), \LPack{pst-node}, \LPack{pstricks-add}, \LPack{multido}, |
| 825 |
% \LPack{pst-eucl}, \LPack{pst-intersect} ($\geq 0.4$) und |
| 826 |
% \LPack{environ}. |
| 827 |
% |
| 828 |
% Alle PSTricks-Pakete machen regen Gebrauch von der Postscript-Sprache, so |
| 829 |
% dass der typische Arbeitsfluss \opt{latex}, \opt{dvips} und |
| 830 |
% ggf. \opt{ps2pdf} umfasst. Es gibt viele alternative Methoden um die |
| 831 |
% Dokumente zu |
| 832 |
% kompilieren.\fnurl{http://tug.org/PSTricks/main.cgi?file=pdf/pdfoutput} |
| 833 |
% \fi |
| 834 |
% \ifENGLISH |
| 835 |
% \section{Requirements} |
| 836 |
% \LPack{pst-optexp} requires \LaTeX{} and recent versions of |
| 837 |
% \LPack{pstricks} ($\geq 2.53$), \LPack{pst-plot} ($\geq 1.61$), |
| 838 |
% \LPack{pst-node}, \LPack{multido}, \LPack{pstricks-add}, |
| 839 |
% \LPack{pst-eucl}, \LPack{pst-intersect} ($\geq 0.4$) and |
| 840 |
% \LPack{environ}. |
| 841 |
% |
| 842 |
% All PSTricks package rely heavily on the Postscript language so that the |
| 843 |
% typical workflow involves \opt{latex}, \opt{dvips}, and \opt{ps2pdf}. Of |
| 844 |
% course there are several alternative ways to compile your |
| 845 |
% documents.\fnurl{http://tug.org/PSTricks/main.cgi?file=pdf/pdfoutput} |
| 846 |
% \fi |
| 847 |
% |
| 848 |
% \ifGERMAN |
| 849 |
% \section{Verbreitung und Installation} |
| 850 |
% Dieses Paket ist auf |
| 851 |
% CTAN\fnurl{http://mirror.ctan.org/help/Catalogue/entries/pst-optexp.html} |
| 852 |
% erhältlich und in \TeX Live and MiK\TeX{} enthalten. |
| 853 |
% |
| 854 |
% Das \LPack{pst-optexp}-Paket umfasst die zwei Hauptdateien |
| 855 |
% \texttt{pst-optexp.ins} und \texttt{pst-optexp.dtx}. Durch Aufrufen |
| 856 |
% von \texttt{tex pst-optexp.ins} werden die beiden folgenden |
| 857 |
% Dateien erzeugt: |
| 858 |
% \begin{itemize} |
| 859 |
% \item \texttt{pst-optexp.pro}: die Postscript Prologdatei |
| 860 |
% \item \texttt{pst-optexp.sty}: die \LaTeX{} Stildatei |
| 861 |
% \end{itemize} |
| 862 |
% Speichern Sie diese Dateien in einem Verzeichnis der Teil Ihres |
| 863 |
% lokalen \TeX-Baums ist. |
| 864 |
% |
| 865 |
% Vergessen Sie nicht \texttt{texhash} aufzurufen um den Baum zu |
| 866 |
% aktualisieren. MiK\TeX{}-Benutzer müssen die Dateinamen-Datenbank |
| 867 |
% (FNDB) aktualisieren. |
| 868 |
% |
| 869 |
% Detailliertere Information finden Sie in der Dokumentation Ihrer |
| 870 |
% \LaTeX-Distribution über die Installation in den lokalen |
| 871 |
% \TeX{}-Baum. |
| 872 |
% \fi |
| 873 |
% \ifENGLISH |
| 874 |
% \section{Distribution and installation} |
| 875 |
% This package is available on |
| 876 |
% CTAN\fnurl{http://mirror.ctan.org/help/Catalogue/entries/pst-optexp.html} and |
| 877 |
% is included in \TeX Live and MiK\TeX. |
| 878 |
% |
| 879 |
% The \LPack{pst-optexp} package consists of the two main files |
| 880 |
% \texttt{pst-optexp.ins} and \texttt{pst-optexp.dtx}. By running \texttt{tex |
| 881 |
% pst-optexp.ins} the following derived files are generated: |
| 882 |
% \begin{itemize} |
| 883 |
% \item \texttt{pst-optexp.pro}: the Postscript prolog file |
| 884 |
% \item \texttt{pst-optexp.sty}: the \LaTeX{} style file |
| 885 |
% \end{itemize} |
| 886 |
% Save the files in a directory which is part of your local \TeX{} tree. |
| 887 |
% |
| 888 |
% Do not forget to run \texttt{texhash} to update this tree. For MiK\TeX{} |
| 889 |
% users, do not forget to update the file name database (FNDB). |
| 890 |
% |
| 891 |
% For more detailed information see the documentation of your personal |
| 892 |
% \LaTeX{} distribution on installing packages to your local \TeX{} |
| 893 |
% system. |
| 894 |
% \fi |
| 895 |
% |
| 896 |
% \ifGERMAN\section{Lizenz}\fi |
| 897 |
% \ifENGLISH\section{License}\fi |
| 898 |
% \ifGERMAN |
| 899 |
% Es wird die Erlaubnis gewährt, dieses Dokument zu kopieren, zu verteilen |
| 900 |
% und\slash oder zu modifizieren, unter den Bestimmungen der \LaTeX{} Project |
| 901 |
% Public License, Version |
| 902 |
% 1.3c.\fnurl{http://www.latex-project.org/lppl.txt}. Dieses |
| 903 |
% Paket wird vom Autor betreut (author-maintained). |
| 904 |
% \fi |
| 905 |
% \ifENGLISH |
| 906 |
% Permission is granted |
| 907 |
% to copy, distribute and\slash or modify this software under the terms of the |
| 908 |
% \LaTeX{} Project Public License, version |
| 909 |
% 1.3c.\fnurl{http://www.latex-project.org/lppl.txt} This |
| 910 |
% package is author-maintained. |
| 911 |
% \fi |
| 912 |
% |
| 913 |
% \ifGERMAN |
| 914 |
% \section{Abwärtskompatibilität} |
| 915 |
% \fi |
| 916 |
% \ifENGLISH |
| 917 |
% \section{Backward compatibility} |
| 918 |
% \fi |
| 919 |
% \ifGERMAN In Version 3.0 wurde dem Paket erheblich fortgeschrittenere |
| 920 |
% Funktionalität hinzugefügt, die es zu schwierig machte zur |
| 921 |
% Vorgängerversion 2.1 vollständig abwärtskompatibel zu |
| 922 |
% bleiben. Insbesondere war die Funktionsweise des \Lcs{drawbeam} |
| 923 |
% Makros grundlegend falsch konzipiert, so dass ein Wechsel zur neuen |
| 924 |
% Funktionalität so schnell wie möglich erfolgen sollte. |
| 925 |
% |
| 926 |
% Eine genauere Zusammenstellung der nicht-kompatiblen Änderungen und Hinweise |
| 927 |
% zur Migration von älteren Dokumenten finden Sie in \prettyref{sec:bwd-comp}. |
| 928 |
% \fi |
| 929 |
% \ifENGLISH |
| 930 |
% Version 3.0 introduced a lot of advanced features which made it too difficult |
| 931 |
% to maintain full backward compatibility with version 2.1. Especially the |
| 932 |
% \Lcs{drawbeam} macro was broken by design, so that it was best to drop the old |
| 933 |
% flaw as early as possible. |
| 934 |
% |
| 935 |
% You find a more detailled list of changes and information for migration of old |
| 936 |
% documents in \prettyref{sec:bwd-comp}. |
| 937 |
% \fi |
| 938 |
% |
| 939 |
% \section{Notation}\label{sec:notation} |
| 940 |
% \ifGERMAN |
| 941 |
% Die meisten Parametertypen, die im Laufe des Dokuments verwendet werden, sind |
| 942 |
% selbsterklärend, andere bedürfen einer genaueren Erläuterung (z.B. der |
| 943 |
% Unterschied zwischen \prm{num} und \prm{psnum}). \prettyref{tab:paramref} |
| 944 |
% erklärt die geläufigsten Typen. |
| 945 |
% \fi |
| 946 |
% \ifENGLISH |
| 947 |
% Often the parameter types are self-explanatory, but in some cases a clear |
| 948 |
% distinction is needed, e.g. between \prm{num} and |
| 949 |
% \prm{psnum}. \prettyref{tab:paramref} explains some commonly used types. |
| 950 |
% \fi |
| 951 |
% |
| 952 |
% \begin{table}\centering |
| 953 |
% \begin{tabularx}{0.9\linewidth}{>{\itshape}lX} \toprule |
| 954 |
% Name & \ifENGLISH description\fi\ifGERMAN Beschreibung\fi\\ \midrule |
| 955 |
% num & \ifENGLISH float number\fi\ifGERMAN Gleitkommazahl\fi \\ |
| 956 |
% psnum & \ifENGLISH Postscript code which evaluates to a number\fi |
| 957 |
% \ifGERMAN Postscript-Kode der zu einer Zahl auswertet\fi\\ |
| 958 |
% int & \ifENGLISH integer number\fi\ifGERMAN Ganzzahl\fi\\ |
| 959 |
% dimen & \ifENGLISH dimension\fi\ifGERMAN Länge\fi\\ |
| 960 |
% psstyle & \ifENGLISH custom graphics parameter configuration defined with \Lcs*{newpsstyle}\fi |
| 961 |
% \ifGERMAN Benutzerdefinierte Parameterkonfiguration definiert mit \Lcs*{newpsstyle}\fi\\ |
| 962 |
% refpoint & \refpointexplanation\\ \bottomrule |
| 963 |
% \end{tabularx} |
| 964 |
% \ifGERMAN |
| 965 |
% \caption{Parametertypen die in den Parameterdefinitionen verwendet werden.} |
| 966 |
% \fi |
| 967 |
% \ifENGLISH |
| 968 |
% \caption{Parameter types used in the parameter reference.} |
| 969 |
% \fi |
| 970 |
% \label{tab:paramref} |
| 971 |
% \end{table} |
| 972 |
% |
| 973 |
% \ifGERMAN |
| 974 |
% \section{Danksagung} |
| 975 |
% \fi |
| 976 |
% \ifENGLISH |
| 977 |
% \section{Acknowledgements} |
| 978 |
% \fi |
| 979 |
% \ifGERMAN |
| 980 |
% Ich danke allen Aktiven auf der PSTricks-Mailingliste für ihre Hilfe, |
| 981 |
% insbesondere Herbert Voß. Mein Dank gilt ebenfalls unterschiedlichen |
| 982 |
% Paketautoren, von denen ich Code kopiert und viel gelernt habe: David |
| 983 |
% Carlisle, Florent Chervet, Enrico Gregorio, Rolf Niepraschk und Heiko |
| 984 |
% Oberdiek. Christine Römer hat mich mit ihrem Artikel in der |
| 985 |
% DTK\footnote{Pakete in Deutsch dokumentieren. in Die TeXnische |
| 986 |
% Komödie. Heft 2/2011, S. 28-35.} überzeugt, ebenfalls eine deutsche |
| 987 |
% Dokumentation bereitzustellen. Der Dokumentationsstil ist eine |
| 988 |
% Mischung aus der \opt{pst-doc} Klasse (Herbert Voß) und dem |
| 989 |
% \opt{ltxdockit} Paket für die \opt{biblatex} Dokumentation (Philipp |
| 990 |
% Lehmann). |
| 991 |
% \fi |
| 992 |
% \ifENGLISH |
| 993 |
% I thank all the people of the PSTricks mailinglist for the continuous |
| 994 |
% help, especially Herbert Voß. Thanks also to various package authors |
| 995 |
% from which I learned and adopted code for this package: David |
| 996 |
% Carlisle, Florent Chervet, Enrico Gregorio, Rolf Niepraschk and Heiko |
| 997 |
% Oberdiek. Christine Römer convinced me with her article in the german |
| 998 |
% DTK\footnote{Pakete in Deutsch dokumentieren. in Die TeXnische |
| 999 |
% Komödie. Heft 2/2011, S. 28-35.} to provide a german translation of |
| 1000 |
% the documentation. The documentation style is a mixture of the |
| 1001 |
% \opt{pst-doc} class (Herbert Voß) and the \opt{ltxdockit} package for |
| 1002 |
% the \opt{biblatex} documentation (Philipp Lehman). |
| 1003 |
% \fi |
| 1004 |
% |
| 1005 |
% \ifGERMAN |
| 1006 |
% \chapter{Grundlegende Ideen} |
| 1007 |
% \fi |
| 1008 |
% \ifENGLISH |
| 1009 |
% \chapter{Basic ideas} |
| 1010 |
% \fi\label{chap:basics} |
| 1011 |
% |
| 1012 |
% \ifGERMAN Dieses Kapitel zeigt die grundlegenden Ideen und Konzepte, die in |
| 1013 |
% diesem Paket stecken. Anhand von elementaren Beispielen werden die |
| 1014 |
% Grundfunktionen wie Ausrichtung, Positionierung (\ref{sec:intro-comp}) und |
| 1015 |
% Beschriftung (\ref{sec:intro-label}) von Komponenten beschrieben. Anschließen |
| 1016 |
% wird deren Verbindung mit Strahlen (\ref{sec:intro-beam}) oder Fasern |
| 1017 |
% (\ref{sec:intro-fiber}) vorgestellt. |
| 1018 |
% |
| 1019 |
% In \prettyref{sec:step-by-step} wird Schritt für Schritt die angedachte |
| 1020 |
% Vorgehensweise für das Erstellen von umfassenden Experimentskizzen |
| 1021 |
% erläutert. Eine vollständige Referenz aller Makros und deren Parameter finden |
| 1022 |
% Sie in \prettyref{chap:generalparam}--\ref{chap:custom}. |
| 1023 |
% |
| 1024 |
% Ein Versuchsaufbau besteht aus Komponenten, die anhand ihrer Referenzknoten |
| 1025 |
% positioniert, verschoben und gedreht werden können und optional eine |
| 1026 |
% Beschriftung erhalten. Anschließen werden die Komponenten mit Lichtstrahlen |
| 1027 |
% oder Fasern verbunden. |
| 1028 |
% \fi |
| 1029 |
% \ifENGLISH |
| 1030 |
% This chapter shows the basic ideas and concepts of this package. Starting with |
| 1031 |
% simple examples, basic functionality such as alignment, positioning |
| 1032 |
% (\ref{sec:intro-comp}) and labelling (\ref{sec:intro-label}) of components is |
| 1033 |
% presented. Following, the connection of components with beam rays |
| 1034 |
% (\ref{sec:intro-beam}) or fiber (\ref{sec:intro-fiber}) is demonstrated. |
| 1035 |
% |
| 1036 |
% In \prettyref{sec:step-by-step} several propositions for preparing large |
| 1037 |
% experimental sketches are illustrated step by step. For a complete reference |
| 1038 |
% of all macros and their parameters, see |
| 1039 |
% \prettyref{chap:generalparam}--\ref{chap:custom}. |
| 1040 |
% |
| 1041 |
% A drawing consists of components, which can be positioned, shifted and rotated |
| 1042 |
% based on their reference nodes, and may have an optional label. Then, the |
| 1043 |
% components are connected with beam rays or fibers. |
| 1044 |
% \fi |
| 1045 |
% |
| 1046 |
% \ifGERMAN\section{Die Komponenten}\fi |
| 1047 |
% \ifENGLISH\section{The components}\fi |
| 1048 |
% \label{sec:intro-comp} |
| 1049 |
% |
| 1050 |
% \ifGERMAN Eine Komponente wird anhand der Knoten, die bei ihrere Definition |
| 1051 |
% angegeben werden -- den Referenzknoten -- platziert. Im folgenden Beispiel |
| 1052 |
% wird eine Linse mittig auf die Verbindungslinie zwischen den Knoten |
| 1053 |
% \prm{A} und \prm{B} gesetzt: |
| 1054 |
% \fi |
| 1055 |
% \ifENGLISH |
| 1056 |
% A component is positioned according to the nodes which are used for its |
| 1057 |
% definition---the reference nodes. In the following examples, the lens is |
| 1058 |
% placed centered between nodes \prm{A} and \prm{B}: |
| 1059 |
% \fi |
| 1060 |
%\iffalse |
| 1061 |
%<*ignore> |
| 1062 |
%\fi |
| 1063 |
\begin{LTXexample}[linerange={1-3,6-6}] |
| 1064 |
\begin{pspicture}[showgrid](0,-0.3)(3,2.3) |
| 1065 |
\pnodes(0,1){A}(3,1){B} |
| 1066 |
\lens(A)(B) |
| 1067 |
\psset{style=Refline}\color{Refline} |
| 1068 |
\psdot(A)\uput[90](A){A}\psdot(B)\uput[90](B){B} |
| 1069 |
\end{pspicture} |
| 1070 |
\end{LTXexample} |
| 1071 |
%\iffalse |
| 1072 |
%</ignore> |
| 1073 |
%\fi |
| 1074 |
% |
| 1075 |
% \ifGERMAN |
| 1076 |
% Diese Positionierung kann anhand von unterschiedlichen Parametern, wie |
| 1077 |
% z.B. \Lkeyword{abspos} beinflusst werden (siehe dazu |
| 1078 |
% \prettyref{sec:positioning} und \prettyref{sec:rotshift}). Im |
| 1079 |
% folgenden Beispiel wird die Linse \opt{0.5} Einheiten vom Knoten |
| 1080 |
% \prm{A} entfernt platziert, die Box sitzt am Ende der Referenzlinie |
| 1081 |
% $\overline{AB}$. |
| 1082 |
% \fi |
| 1083 |
% \ifENGLISH |
| 1084 |
% This position can be changed with a number of parameters, such as |
| 1085 |
% \Lkeyword{abspos} (see \prettyref{sec:positioning} and |
| 1086 |
% \prettyref{sec:rotshift}). In the next example, the lens is positioned |
| 1087 |
% \opt{0.5} units apart from node \prm{A}, the box is placed at the end |
| 1088 |
% of the reference line $\overline{AB}$. |
| 1089 |
% \fi |
| 1090 |
%\iffalse |
| 1091 |
%<*ignore> |
| 1092 |
%\fi |
| 1093 |
\begin{LTXexample}[morekeywords={[21]{abspos, position}}, linerange={1-4,7-7}] |
| 1094 |
\begin{pspicture}[showgrid](0,-0.3)(3,2.3) |
| 1095 |
\pnode(0,1){A}\pnode(1.5,1){B} |
| 1096 |
\lens[abspos=0.5](A)(B) |
| 1097 |
\optbox[position=end](A)(B) |
| 1098 |
\psset{style=Refline}\color{Refline} |
| 1099 |
\psdot(A)\uput[90](A){A}\psdot(B)\uput[135](B){B} |
| 1100 |
\end{pspicture} |
| 1101 |
\end{LTXexample} |
| 1102 |
%\iffalse |
| 1103 |
%</ignore> |
| 1104 |
%\fi |
| 1105 |
% |
| 1106 |
% \ifGERMAN Die Komponenten lassen sich allgemein in zwei Kategorien |
| 1107 |
% unterteilen: Faser- und Freistrahlkomponenten. Diese unterscheiden sich in |
| 1108 |
% erster Linie bezüglich ihrer Verbindungsmöglichkeiten: Freistrahlkomponenten |
| 1109 |
% können sowohl mit Lichtstrahlen als auch mit Fasern verbunden werden, |
| 1110 |
% wohingegen Faserkomponenten nur Faserverbindungen erlauben. |
| 1111 |
% \fi |
| 1112 |
% \ifENGLISH |
| 1113 |
% The components can be divided in two categories: free-ray and fiber |
| 1114 |
% components. These differ only in their connection possibilities: Free-ray |
| 1115 |
% components can have fiber or free-ray connections, whereas fiber components |
| 1116 |
% support fiber connections only. |
| 1117 |
% \fi |
| 1118 |
% |
| 1119 |
% \ifGERMAN\section{Beschriftungen}\fi |
| 1120 |
% \ifENGLISH\section{Labels}\fi |
| 1121 |
% \label{sec:intro-label} |
| 1122 |
% |
| 1123 |
% \ifGERMAN Jede Komponente kann optional eine Beschriftung erhalten, die |
| 1124 |
% relativ zur Komponente platziert wird. |
| 1125 |
% \fi |
| 1126 |
% \ifENGLISH Every component can have an optional label, which is positioned |
| 1127 |
% relative to the component. |
| 1128 |
% \fi |
| 1129 |
%\iffalse |
| 1130 |
%<*ignore> |
| 1131 |
%\fi |
| 1132 |
\begin{LTXexample}[morekeywords={[21]{labelangle, labelref, labeloffset}}, linerange={1-5,8-8}] |
| 1133 |
\begin{pspicture}[showgrid](0,-0.3)(3,3.3) |
| 1134 |
\pnode(0,2.5){A}\pnode(2,2.5){B}\pnode(2,1.5){C} |
| 1135 |
\mirror[labelangle=-45](A)(B)(C){M} |
| 1136 |
\optbox[position=start, labeloffset=0, labelref=relative](C)(B){box} |
| 1137 |
\drawbeam(A){1}{2} |
| 1138 |
\psset{style=Refline}\color{Refline} |
| 1139 |
\psdot(A)\uput[90](A){A}\psdot(B)\uput[-135](B){B}\psdot(C)\uput[45](C){C} |
| 1140 |
\end{pspicture} |
| 1141 |
\end{LTXexample} |
| 1142 |
%\iffalse |
| 1143 |
%</ignore> |
| 1144 |
%\fi |
| 1145 |
% |
| 1146 |
% \ifGERMAN\section{Freistrahl-Verbindungen}\fi |
| 1147 |
% \ifENGLISH\section{Free-ray connections}\fi |
| 1148 |
% \label{sec:intro-beam} |
| 1149 |
% |
| 1150 |
% \ifGERMAN |
| 1151 |
% Freistrahlkomponenten können mit Lichtstrahlen verbunden werden, deren Weg mit |
| 1152 |
% Raytracing berechnet werden kann. Da es sich um ein Paket zum |
| 1153 |
% \emph{Skizzieren} experimenteller Aufbauten handelt, werden hier trotz der |
| 1154 |
% realistischen Berechnungen viele Möglichkeiten offen gehalten den Strahlengang |
| 1155 |
% zu manipulieren. |
| 1156 |
% |
| 1157 |
% Im einfachsten Fall wird eine einzelne Linie gezeichnet, deren optischer Weg |
| 1158 |
% über den Brechungsindex \Lkeyword{n} und das Snelliussche Brechungsgesetz |
| 1159 |
% bestimmt wird. |
| 1160 |
% |
| 1161 |
% Das Beispiel zeigt zwei Strahlen, die mit unterschiedlichen Anfangsbedingungen |
| 1162 |
% auf die Linse treffen, der rote Strahl startet mit einem Abstand von \opt{0.2} |
| 1163 |
% von der optischen Achse (\Lkeyword{beampos}) und wird entsprechend von der |
| 1164 |
% Linse abgelenkt. |
| 1165 |
% \fi |
| 1166 |
% \ifENGLISH |
| 1167 |
% Free-ray components can be connected with beam rays, which path can be |
| 1168 |
% calculated by raytracing. Besides the realistic tracing possibilities, there |
| 1169 |
% are many ways to manipulate the beam paths because you are dealing with a |
| 1170 |
% package for \emph{sketching} experimental setups. |
| 1171 |
% |
| 1172 |
% In the simplest case a single line is drawn, which optical path is determined |
| 1173 |
% by the refractive index \Lkeyword{n} and Snell's law. |
| 1174 |
% |
| 1175 |
% The example shows two beams which hit the lens with different initial |
| 1176 |
% conditions. The red beam starts at a distance of \opt{0.2} from the optical |
| 1177 |
% axis (\Lkeyword{beampos}) and is deflected by the lens accordingly. |
| 1178 |
% \fi |
| 1179 |
% \iffalse |
| 1180 |
%<*ignore> |
| 1181 |
% \fi |
| 1182 |
\begin{LTXexample}[linerange={1-5,8-8}] |
| 1183 |
\begin{pspicture}[showgrid](0,-0.3)(3,2.3) |
| 1184 |
\pnode(0,1){A}\pnode(3,1){B} |
| 1185 |
\lens[n=2, lensradius=2 2, lensheight=1.5](A)(B) |
| 1186 |
\drawbeam(A){1}(B) |
| 1187 |
\drawbeam[beampos=0.4, linecolor=red](A){1}(B) |
| 1188 |
\psset{style=Refline}\color{Refline} |
| 1189 |
\psdot(A)\uput[-90](A){A}\psdot(B)\uput[90](B){B} |
| 1190 |
\end{pspicture} |
| 1191 |
\end{LTXexample} |
| 1192 |
% \iffalse |
| 1193 |
%</ignore> |
| 1194 |
% \fi |
| 1195 |
% |
| 1196 |
% \ifGERMAN Die Strahlen können mit beliebigen Strichlierungen und Pfeilen |
| 1197 |
% dekoriert werden. |
| 1198 |
% \fi |
| 1199 |
% \ifENGLISH The beams can be decorated with arbitrary dashs and arrows. |
| 1200 |
% \fi |
| 1201 |
% \iffalse |
| 1202 |
%<*ignore> |
| 1203 |
% \fi |
| 1204 |
\begin{LTXexample}[linerange={1-4,7-7}] |
| 1205 |
\begin{pspicture}[showgrid](0,-0.3)(3,2.3) |
| 1206 |
\pnode(0,1){A}\pnode(3,1){B} |
| 1207 |
\lens[n=2, lens=2 2 1.5](A)(B) |
| 1208 |
\drawbeam[beamangle=10, ArrowInside=->, arrows=-|, beaminside=false](A){1}(B) |
| 1209 |
\psset{style=Refline}\color{Refline} |
| 1210 |
\psdot(A)\uput[90](A){A}\psdot(B)\uput[-90](B){B} |
| 1211 |
\end{pspicture} |
| 1212 |
\end{LTXexample} |
| 1213 |
% \iffalse |
| 1214 |
%</ignore> |
| 1215 |
% \fi |
| 1216 |
% |
| 1217 |
% \ifGERMAN Ebenfalls können ausgedehnte Strahlen gezeichnet werden deren |
| 1218 |
% Randstrahlen mit \Lkeyword*{linestyle} etc. und deren Füllung über |
| 1219 |
% \Lkeyword*{fillstyle} geändert werden können. |
| 1220 |
% \fi |
| 1221 |
% \ifENGLISH You can also draw wide beams. The marginal rays can be changed with |
| 1222 |
% \Lkeyword*{linestyle} etc. and the filling with \Lkeyword*{fillstyle} etc. |
| 1223 |
% \fi |
| 1224 |
% \iffalse |
| 1225 |
%<*ignore> |
| 1226 |
% \fi |
| 1227 |
\begin{LTXexample}[linerange={1-5,8-8}] |
| 1228 |
\begin{pspicture}[showgrid](0,-0.3)(3,2.3) |
| 1229 |
\pnode(0.5,1){A}\pnode(3,1){B} |
| 1230 |
\optbox[position=start, optboxsize=0.5 1](A)(B) |
| 1231 |
\lens[n=2](A)(B) |
| 1232 |
\drawwidebeam[beamwidth=0.2, fillstyle=solid, fillcolor=green!40]{1-2}(B) |
| 1233 |
\psset{style=Refline}\color{Refline} |
| 1234 |
\psdot(A)\uput[45](A){A}\psdot(B)\uput[135](B){B} |
| 1235 |
\end{pspicture} |
| 1236 |
\end{LTXexample} |
| 1237 |
% \iffalse |
| 1238 |
%</ignore> |
| 1239 |
% \fi |
| 1240 |
% |
| 1241 |
% \ifGERMAN Die Strahlen können auch hinter die Komponenten gelegt werden. Dafür |
| 1242 |
% müssen alle beteiligten Komponenten und Strahlen in eine |
| 1243 |
% \Lenv{optexp}-Umgebung gepackt werden (vergleiche das folgende Beispiel mit |
| 1244 |
% dem vorangegangenen). |
| 1245 |
% \fi |
| 1246 |
% \ifENGLISH The beams can also lay behind the components. For this you must |
| 1247 |
% enclose all respective components and rays in a \Lenv{optexp} environment |
| 1248 |
% (compare the previous example with the following one). |
| 1249 |
% \fi |
| 1250 |
% \iffalse |
| 1251 |
%<*ignore> |
| 1252 |
% \fi |
| 1253 |
\begin{LTXexample} |
| 1254 |
\begin{pspicture}[showgrid](0,-0.3)(3,2.3) |
| 1255 |
\pnode(1.5,1){A}\pnode(3,1){B} |
| 1256 |
\begin{optexp} |
| 1257 |
\optbox[position=start](A)(B) |
| 1258 |
\lens[n=2](A)(B) |
| 1259 |
\drawwidebeam[beamwidth=0.2, fillstyle=solid, fillcolor=green!40]{1}{2}(B) |
| 1260 |
\end{optexp} |
| 1261 |
\end{pspicture} |
| 1262 |
\end{LTXexample} |
| 1263 |
% \iffalse |
| 1264 |
%</ignore> |
| 1265 |
% \fi |
| 1266 |
% |
| 1267 |
% \ifGERMAN\section{Faserverbindungen}\fi |
| 1268 |
% \ifENGLISH\section{Fiber connections}\fi |
| 1269 |
% \label{sec:intro-fiber} |
| 1270 |
% |
| 1271 |
% \ifGERMAN |
| 1272 |
% Eine andere Möglichkeit, Komponenten zu verbinden, sind Fasern |
| 1273 |
% (\Lcs{drawfiber}). Hiermit bestehen weitreichende Möglichkeiten die Fasern |
| 1274 |
% automatisch an die Komponentenausrichtung anzupassen. |
| 1275 |
% \fi |
| 1276 |
% \ifENGLISH |
| 1277 |
% Fibers (\Lcs{drawfiber}) are another possibility of connecting |
| 1278 |
% components. Here, you have several way of automatically adapting the fiber |
| 1279 |
% connection to the component alignment. |
| 1280 |
% \fi |
| 1281 |
% \iffalse |
| 1282 |
%<*ignore> |
| 1283 |
% \fi |
| 1284 |
\begin{LTXexample} |
| 1285 |
\begin{pspicture}[showgrid](0,-0.3)(3,3.3) |
| 1286 |
\pnode(1,2.5){A}\pnode(2.5,1){B} |
| 1287 |
\psset{optboxsize=1 0.6} |
| 1288 |
\optbox[position=start](A)(B|A) |
| 1289 |
\optbox[position=end](B|A)(B) |
| 1290 |
\drawfiber{1}{2} |
| 1291 |
\drawfiber[linecolor=blue, ncurv=1.2]{1}{2} |
| 1292 |
\end{pspicture} |
| 1293 |
\end{LTXexample} |
| 1294 |
% \iffalse |
| 1295 |
%</ignore> |
| 1296 |
% \fi |
| 1297 |
% |
| 1298 |
% \ifGERMAN Üblicherweise werden Fasern mit einer \Lcs*{nccurve}-Verbindung |
| 1299 |
% gezeichnet, jede andere Knotenverbindung ist aber ebenfalls möglich |
| 1300 |
% (\Lkeyword{fiberstyle}). |
| 1301 |
% \fi |
| 1302 |
% \ifENGLISH Usually, the fibers are drawn as \Lcs*{nccurve} connections, other |
| 1303 |
% node connections are possible as well (\Lkeyword{fiberstyle}). |
| 1304 |
% \fi |
| 1305 |
% \iffalse |
| 1306 |
%<*ignore> |
| 1307 |
% \fi |
| 1308 |
\begin{LTXexample} |
| 1309 |
\begin{pspicture}[showgrid](0,-0.3)(3,3.3) |
| 1310 |
\pnode(1,2.5){A}\pnode(2.5,1){B} |
| 1311 |
\psset{optboxsize=1 0.6} |
| 1312 |
\optbox[position=start](A)(B|A) |
| 1313 |
\optbox[position=end](B|A)(B) |
| 1314 |
\drawfiber[fiberstyle=angle, linearc=0.5]{1}{2} |
| 1315 |
\end{pspicture} |
| 1316 |
\end{LTXexample} |
| 1317 |
% \iffalse |
| 1318 |
%</ignore> |
| 1319 |
% \fi |
| 1320 |
% |
| 1321 |
% \newpage |
| 1322 |
% \ifGERMAN\section{Schritt-für-Schritt-Beispiele}\fi |
| 1323 |
% \ifENGLISH\section{Step-by-step examples}\fi |
| 1324 |
% \label{sec:step-by-step} |
| 1325 |
% |
| 1326 |
% \ifGERMAN |
| 1327 |
% \subsection{Freistrahlaufbau} |
| 1328 |
% In diesem ersten Beispiel werden alle Komponenten auf eine Verbindungslinie |
| 1329 |
% verteilt und mit einem Strahl verbunden. |
| 1330 |
% |
| 1331 |
% Zuerst werden Anfangsknoten \prm{A} und Endknoten \prm{B} definiert. Die erste |
| 1332 |
% \Lcomp{optbox} wird an den Anfang platziert, die Wellenplatte und der |
| 1333 |
% Polarisator werden innerhalb der Verbindungslinie positioniert. Der Parameter |
| 1334 |
% \Lkeyword{position} erwartet Werte zwischen \opt{0} und \opt{1}, die relativ |
| 1335 |
% zur Länge der Verbindungslinie sind, oder \opt{start}/\opt{end}. Der Detektor |
| 1336 |
% wird immer an das Ende der Linie gesetzt. |
| 1337 |
% |
| 1338 |
% Zuletzt werden alle Komponenten mit einem einfachen Lichtstrahl verbunden. |
| 1339 |
% \fi |
| 1340 |
% \ifENGLISH |
| 1341 |
% In this first example, all components are distributed on a single line and |
| 1342 |
% connected with a beam. |
| 1343 |
% |
| 1344 |
% First we define the start node \prm{A} and the stop node \prm{B}. The first |
| 1345 |
% \Lcomp{optbox} is positioned at the start, the wave plate and the polarizer are |
| 1346 |
% positioned between the nodes. The parameter \Lkeyword{position} expects a |
| 1347 |
% value between \opt{0} and \opt{1} which is relative to the length of the |
| 1348 |
% reference line, or \opt{start}/\opt{end}. The detector is always positioned at |
| 1349 |
% the end of its reference line. |
| 1350 |
% |
| 1351 |
% Finally, all components are connected with a simple beam ray. |
| 1352 |
% \fi |
| 1353 |
% \iffalse |
| 1354 |
%<*ignore> |
| 1355 |
% \fi |
| 1356 |
\begin{LTXexample}[linerange={1-7,10-10}] |
| 1357 |
\begin{pspicture}[showgrid](4,2) |
| 1358 |
\pnode(1,1){A}\pnode(3,1){B} |
| 1359 |
\optbox[position=start, optboxwidth=1.2, labeloffset=0](A)(B){Laser} |
| 1360 |
\optretplate[position=0.3](A)(B){$\nicefrac{\lambda}{2}$} |
| 1361 |
\optplate[position=0.7](A)(B){pol} |
| 1362 |
\optdetector[dettype=diode](A)(B){PD} |
| 1363 |
\drawbeam{1}{2}{3}{4} |
| 1364 |
\psset{style=Refline, dotscale=1.5}\psdot(A)\psdot(B) |
| 1365 |
\uput[45](A){\color{Refline}A}\uput[135](B){\color{Refline}B} |
| 1366 |
\end{pspicture} |
| 1367 |
\end{LTXexample} |
| 1368 |
% \iffalse |
| 1369 |
%</ignore> |
| 1370 |
% \fi |
| 1371 |
% |
| 1372 |
% \ifGERMAN\subsection{Galilei-Fernrohr}\fi |
| 1373 |
% \ifENGLISH\subsection{Galilean telescope}\fi |
| 1374 |
% |
| 1375 |
% \ifGERMAN |
| 1376 |
% Im Folgenden wird ein sehr einfacher Aufbau mit einer konkaven und |
| 1377 |
% einer konvexen Linse schrittweise erläutert. |
| 1378 |
% |
| 1379 |
% Zuerst werden die Referenzknoten \prm{A} und \prm{B} definiert, die für die |
| 1380 |
% Ausrichtung der Komponenten verwendet werden. Zur besseren Übersicht werden |
| 1381 |
% beide Knoten gekennzeichnet, desweiteren dient ein Koordinatengitter der |
| 1382 |
% Orientierung. |
| 1383 |
% |
| 1384 |
% Die erste Linse soll konkav gekrümmte Grenzflächen haben. Mit |
| 1385 |
% \Lkeyword{lensradius} werden die Radien der linken und rechten Fläche auf |
| 1386 |
% negative Werte gesetzt, was eine konkave Krümmung ergibt. Die Linse wird mit |
| 1387 |
% \Lkeyword{abspos} eine Einheit vom \prm{A}-Knoten entfernt positioniert. |
| 1388 |
% \fi |
| 1389 |
% \ifENGLISH |
| 1390 |
% This example describes a simple setup with a concave and a convex lens and the |
| 1391 |
% raytracing through them. |
| 1392 |
% |
| 1393 |
% First, we define the reference nodes \prm{A} and \prm{B} which are used for |
| 1394 |
% alignment of the components. For better overview, these nodes are highlighted |
| 1395 |
% and a grid is drawn. |
| 1396 |
% |
| 1397 |
% The first lens should have concave interfaces. With \Lkeyword{lensradius} the |
| 1398 |
% interface radii are set to negative values, which correspond to concave |
| 1399 |
% curvatures. With \Lkeyword{abspos} the lens is positioned one unit from |
| 1400 |
% \prm{A} node. |
| 1401 |
% \fi |
| 1402 |
% \iffalse |
| 1403 |
%<*ignore> |
| 1404 |
% \fi |
| 1405 |
\begingroup |
| 1406 |
\catcode`\*=13 |
| 1407 |
\def*{}% |
| 1408 |
\begin{LTXexample}[style=example, linerange={1-4,6-6}] |
| 1409 |
*\ON*\begin{pspicture}[showgrid](0,-0.3)(5,2.3) |
| 1410 |
\pnode(0,1){A}\pnode(3.5,1){B}*\OFF* |
| 1411 |
\lens[lensradius=-0.7, |
| 1412 |
abspos=1](A)(B){concave}*\ON* |
| 1413 |
\psset{style=Refline}\psdot(A)\psdot(B) |
| 1414 |
\end{pspicture}*\OFF* |
| 1415 |
\end{LTXexample} |
| 1416 |
\endgroup |
| 1417 |
% \iffalse |
| 1418 |
%</ignore> |
| 1419 |
% \fi |
| 1420 |
% |
| 1421 |
% \ifGERMAN |
| 1422 |
% Die zweite Linse bekommt eine konvexe Krümmung (\Lkeyword{lensradius} |
| 1423 |
% ist positiv) und wird \opt{2.6} Einheiten von \prm{A} |
| 1424 |
% positioniert. Die Linsenhöhe wird mit \Lkeyword{lensheight} |
| 1425 |
% eingestellt. |
| 1426 |
% \fi |
| 1427 |
% \ifENGLISH |
| 1428 |
% The second lens has a convex curvature (\Lkeyword{lensradius} is positive) and |
| 1429 |
% is positioned \opt{2.6} units apart from \prm{A}. Parameter |
| 1430 |
% \Lkeyword{lensheight} sets the total height of the lens. |
| 1431 |
% \fi |
| 1432 |
% \iffalse |
| 1433 |
%<*ignore> |
| 1434 |
% \fi |
| 1435 |
\begingroup |
| 1436 |
\catcode`\*=13 |
| 1437 |
\def*{}% |
| 1438 |
\begin{LTXexample}[style=example, linerange={1-6,9-9}] |
| 1439 |
*\ON*\begin{pspicture}[showgrid](0,-0.3)(5,2.3) |
| 1440 |
\pnode(0,1){A}\pnode(3.5,1){B} |
| 1441 |
\lens[lensradius=-0.7, |
| 1442 |
abspos=1](A)(B){concave}*\OFF* |
| 1443 |
\lens[lensradius=2.3, lensheight=1.3, |
| 1444 |
abspos=2.6](A)(B){convex}*\ON* |
| 1445 |
\psset{style=Refline}\psdot(A)\psdot(B) |
| 1446 |
\uput[45](A){\color{Refline}A}\uput[135](B){\color{Refline}B} |
| 1447 |
\end{pspicture}*\OFF* |
| 1448 |
\end{LTXexample} |
| 1449 |
\endgroup |
| 1450 |
% \iffalse |
| 1451 |
%</ignore> |
| 1452 |
% \fi |
| 1453 |
% |
| 1454 |
% \ifGERMAN |
| 1455 |
% Die Lichtstrahlen sollen auf einer CCD-Kamera enden, die mit einer |
| 1456 |
% \Lcomp{optbox} gezeichnet wird. Mit \Lkeyword{position}\opt{=end} wird die Box |
| 1457 |
% ans Ende der Referenzlinie von \prm{A} nach \prm{B} gesetzt, die |
| 1458 |
% Beschriftung wird mit \Lkeyword{labeloffset} in die Mitte der Komponente |
| 1459 |
% gelegt. |
| 1460 |
% \fi |
| 1461 |
% \ifENGLISH |
| 1462 |
% The beam rays are supposed to end at the CCD camera which is drawn as a |
| 1463 |
% \Lcomp{optbox}. With \Lkeyword{position}\opt{=end} the box is positioned at |
| 1464 |
% the end of the reference line from \prm{A} to \prm{B}. The label is put at |
| 1465 |
% the center of the component with \Lkeyword{labeloffset}. |
| 1466 |
% \fi |
| 1467 |
% \iffalse |
| 1468 |
%<*ignore> |
| 1469 |
% \fi |
| 1470 |
\begingroup |
| 1471 |
\catcode`\*=13 |
| 1472 |
\def*{}% |
| 1473 |
\begin{LTXexample}[style=example, linerange={1-7,10-10}] |
| 1474 |
*\ON*\begin{pspicture}[showgrid](0,-0.3)(5,2.3) |
| 1475 |
\pnode(0,1){A}\pnode(3.5,1){B} |
| 1476 |
\lens[lensradius=-0.7, |
| 1477 |
abspos=1](A)(B){concave} |
| 1478 |
\lens[lensradius=2.3, lensheight=1.3, |
| 1479 |
abspos=2.6](A)(B){convex}*\OFF* |
| 1480 |
\optbox[position=end, labeloffset=0](A)(B){CCD}*\ON* |
| 1481 |
\psset{style=Refline}\psdot(A)\psdot(B) |
| 1482 |
\uput[45](A){\color{Refline}A}\uput[135](B){\color{Refline}B} |
| 1483 |
\end{pspicture}*\OFF* |
| 1484 |
\end{LTXexample} |
| 1485 |
\endgroup |
| 1486 |
% \iffalse |
| 1487 |
%</ignore> |
| 1488 |
% \fi |
| 1489 |
% |
| 1490 |
% \ifGERMAN |
| 1491 |
% Zum Schluß wird ein aufgeweiteter Strahl mit einer Strahlbreite von \opt{0.2} |
| 1492 |
% und ohne anfängliche Divergenz durch die Komponenten geschickt. Der |
| 1493 |
% Strahlengang wird mittels Raytracing berechnet. Die Linsenparameter in diesem |
| 1494 |
% Beispiel wurden so gewählt das bei kollimiertem Eingangsstrahl der |
| 1495 |
% Ausgangsstrahl ebenfalls kollimiert ist. |
| 1496 |
% \fi |
| 1497 |
% \ifENGLISH |
| 1498 |
% Finally, a wide beam with an initial beam width of \opt{0.2} without |
| 1499 |
% divergence is sent through the components. The beam path is calculated by |
| 1500 |
% raytracing. The lens parameters in this example were set such, that for a |
| 1501 |
% collimated input beam also the output beam is collimated. |
| 1502 |
% \fi |
| 1503 |
% \iffalse |
| 1504 |
%<*ignore> |
| 1505 |
% \fi |
| 1506 |
\begingroup |
| 1507 |
\catcode`\*=13 |
| 1508 |
\def*{}% |
| 1509 |
\begin{LTXexample}[style=example] |
| 1510 |
*\ON*\begin{pspicture}(5,2) |
| 1511 |
\pnode(0,1){A}\pnode(3.5,1){B} |
| 1512 |
\lens[lensradius=-0.7, |
| 1513 |
abspos=1](A)(B){concave} |
| 1514 |
\lens[lensradius=2.3, lensheight=1.3, |
| 1515 |
abspos=2.6](A)(B){convex} |
| 1516 |
\optbox[position=end, labeloffset=0](A)(B){CCD}*\OFF* |
| 1517 |
\drawwidebeam[beamwidth=0.2](A){1}{2}{3}*\ON* |
| 1518 |
\end{pspicture}*\OFF* |
| 1519 |
\end{LTXexample} |
| 1520 |
\endgroup |
| 1521 |
% \iffalse |
| 1522 |
%</ignore> |
| 1523 |
% \fi |
| 1524 |
% |
| 1525 |
% \ifGERMAN |
| 1526 |
% Das Aussehen des Lichtstrahls wird über den \Lstyle{Beam}-Stil |
| 1527 |
% eingestellt, und kann z.B. mit einer halbtransparenten Füllung |
| 1528 |
% versehen werden. |
| 1529 |
% \fi |
| 1530 |
% \ifENGLISH |
| 1531 |
% The appearance of the beam can be changed via the \Lstyle{Beam} style, and may |
| 1532 |
% have e.g. a semitransparent fill pattern. |
| 1533 |
% \fi |
| 1534 |
% \iffalse |
| 1535 |
%<*ignore> |
| 1536 |
% \fi |
| 1537 |
\begingroup |
| 1538 |
\catcode`\*=13 |
| 1539 |
\def*{}% |
| 1540 |
\begin{LTXexample}[style=example, label=ex:galileo, caption={caption}] |
| 1541 |
*\ON*\begin{pspicture}(5,2) |
| 1542 |
\pnode(0,1){A}\pnode(3.5,1){B} |
| 1543 |
\lens[lensradius=-0.7, |
| 1544 |
abspos=1](A)(B){concave} |
| 1545 |
\lens[lensradius=2.3, lensheight=1.3, |
| 1546 |
abspos=2.6](A)(B){convex} |
| 1547 |
\optbox[position=end, labeloffset=0](A)(B){CCD}*\OFF* |
| 1548 |
\addtopsstyle{Beam}{fillstyle=solid, |
| 1549 |
fillcolor=green, opacity=0.2} |
| 1550 |
*\ON*\drawwidebeam[beamwidth=0.2](A){1}{2}{3} |
| 1551 |
\end{pspicture}*\OFF* |
| 1552 |
\end{LTXexample} |
| 1553 |
\endgroup |
| 1554 |
% \iffalse |
| 1555 |
%</ignore> |
| 1556 |
% \fi |
| 1557 |
% |
| 1558 |
% \ifGERMAN\subsection{Faseraufbau}\fi |
| 1559 |
% \ifENGLISH\subsection{Fiber setup}\fi |
| 1560 |
% \label{sec:fiber-setup} |
| 1561 |
% |
| 1562 |
% \ifGERMAN |
| 1563 |
% Dieses Beispiel zeigt, wie ein faseroptischer Aufbau mit automatisch |
| 1564 |
% gezeichneten Faserverbindungen konstruiert werden kann. |
| 1565 |
% |
| 1566 |
% Auch hier werden die Referenzknoten zur besseren Orientierung |
| 1567 |
% eingezeichnet. Im Gegensatz zum vorhergehenden Beispiel benötigen wir |
| 1568 |
% mehr Referenzknoten, da die Faserkomponenten direkt mit diesen |
| 1569 |
% verbunden werden. |
| 1570 |
% |
| 1571 |
% Der Laser wird wieder an den Anfang gesetzt. Der Abstand |
| 1572 |
% der Beschriftung wird mit dem Parameter \Lkeyword{label} eingestellt, |
| 1573 |
% mit dem alle Beschriftungsparameter gesammelt eingestellt werden |
| 1574 |
% können. Da eine \Lcomp{optbox} sowohl als Freistrahl- als auch als |
| 1575 |
% Faserkomponente verwendet werden kann, wird in der Standardeinstellung |
| 1576 |
% keine Faser gezeichnet, was mit \Lkeyword{fiber} geändert werden |
| 1577 |
% kann. Die Breite dieser und aller folgenden \Lcomp{optbox} wird auf |
| 1578 |
% \opt{0.7} geändert. |
| 1579 |
% \fi |
| 1580 |
% \ifENGLISH |
| 1581 |
% This example shows how to setup a fiber drawing with automatic fiber |
| 1582 |
% connections. |
| 1583 |
% |
| 1584 |
% Again, the reference nodes are shown for better orientation. In contrast to |
| 1585 |
% the previous example, here, we need more reference nodes because the |
| 1586 |
% components are connected directly with them. |
| 1587 |
% |
| 1588 |
% The laser is set at the start. The label offset is set with the |
| 1589 |
% \Lkeyword{label} parameter, which would allow setting all label parameters at |
| 1590 |
% once. A \Lcomp{optbox} is originally a free-ray component, so that for it the |
| 1591 |
% fiber connection must be enabled with \Lkeyword{fiber}. The width of all |
| 1592 |
% \Lcomp{optbox} is changed to \opt{0.7}. |
| 1593 |
% \fi |
| 1594 |
% \iffalse |
| 1595 |
%<*ignore> |
| 1596 |
% \fi |
| 1597 |
% \begingroup |
| 1598 |
% \catcode`\*=13 |
| 1599 |
% \def*{}% |
| 1600 |
\begin{LTXexample}[style=example, linerange={1-4,6-6}] |
| 1601 |
*\ON*\begin{pspicture}[showgrid](4.7,2) |
| 1602 |
\pnodes(0.7,1){A}(1,1){B}(2.8,1){C}(4,1.5){D}(4,0.5){E}*\OFF* |
| 1603 |
\psset{optboxwidth=0.7, labelstyle=\scriptsize} |
| 1604 |
\optbox[position=start, label=0, fiber](A)(B){LD}*\ON* |
| 1605 |
\psset{style=Refline}\psdot(A)\psdot(B)\psdot(C)\psdot(D)\psdot(E) |
| 1606 |
\end{pspicture}*\OFF* |
| 1607 |
\end{LTXexample} |
| 1608 |
% \iffalse |
| 1609 |
%</ignore> |
| 1610 |
% \fi |
| 1611 |
% |
| 1612 |
% \ifGERMAN |
| 1613 |
% Als nächstes wird ein Mach-Zehnder-Modulator ohne Beschriftung gezeichnet, der |
| 1614 |
% automatisch mit Fasern mit seinen Referenzknoten verbunden wird. |
| 1615 |
% \fi |
| 1616 |
% \ifENGLISH The Mach--Zehner modulator is drawn without label and connected |
| 1617 |
% automatically with fibers to its reference nodes. |
| 1618 |
% \fi |
| 1619 |
% \iffalse |
| 1620 |
%<*ignore> |
| 1621 |
% \fi |
| 1622 |
\begin{LTXexample}[style=example, linerange={1-5,7-7}] |
| 1623 |
*\ON*\begin{pspicture}[showgrid](4.7,2) |
| 1624 |
\pnodes(0.7,1){A}(1,1){B}(2.8,1){C}(4,1.5){D}(4,0.5){E} |
| 1625 |
\psset{optboxwidth=0.7, labelstyle=\scriptsize} |
| 1626 |
\optbox[position=start, label=0, fiber](A)(B){LD}*\OFF* |
| 1627 |
\optmzm(B)(C)*\ON* |
| 1628 |
\psset{style=Refline}\psdot(A)\psdot(B)\psdot(C)\psdot(D)\psdot(E) |
| 1629 |
\end{pspicture}*\OFF* |
| 1630 |
\end{LTXexample} |
| 1631 |
% \iffalse |
| 1632 |
%</ignore> |
| 1633 |
% \fi |
| 1634 |
% |
| 1635 |
% \ifGERMAN |
| 1636 |
% Danach wird ein Faserkoppler mit einem Eingang und zwei Ausgängen |
| 1637 |
% gezeichnet. Der Koppler wird zwischen dem Eingangsknoten und dem |
| 1638 |
% Mittelpunkt der beiden Ausgangsknoten ausgerichtet. |
| 1639 |
% \fi |
| 1640 |
% \ifENGLISH Then, we draw a fiber coupler with one input and two output |
| 1641 |
% fibers. The coupler is positioned between the input node and the center of the |
| 1642 |
% two output nodes. |
| 1643 |
% \fi |
| 1644 |
% \iffalse |
| 1645 |
%<*ignore> |
| 1646 |
% \fi |
| 1647 |
\begin{LTXexample}[style=example, linerange={1-6,8-8}] |
| 1648 |
*\ON*\begin{pspicture}[showgrid](4.7,2) |
| 1649 |
\pnodes(0.7,1){A}(1,1){B}(2.8,1){C}(4,1.5){D}(4,0.5){E} |
| 1650 |
\psset{optboxwidth=0.7, labelstyle=\scriptsize} |
| 1651 |
\optbox[position=start, label=0, fiber](A)(B){LD} |
| 1652 |
\optmzm(B)(C)*\OFF* |
| 1653 |
\wdmsplitter(C)(D)(E){50\%}*\ON* |
| 1654 |
\psset{style=Refline}\psdot(A)\psdot(B)\psdot(C)\psdot(D)\psdot(E) |
| 1655 |
\end{pspicture}*\OFF* |
| 1656 |
\end{LTXexample} |
| 1657 |
% \iffalse |
| 1658 |
%</ignore> |
| 1659 |
% \fi |
| 1660 |
% |
| 1661 |
% \ifGERMAN |
| 1662 |
% An die Enden des Kopplers wird ein optischer Spektrumanalysator (OSA) |
| 1663 |
% und eine Leistungsmessgerät (PD) gesetzt. Der \Lcomp{optdetector} wird |
| 1664 |
% nach Voreinstellung ans Ende der Referenzlinie gesetzt |
| 1665 |
% (\Lkeyword{position}\opt{=end}). Diese beiden Komponenten werden ohne |
| 1666 |
% weitere Einstellungen ohne Faserverbindungen gezeichnet. Das passt, da |
| 1667 |
% ihre jeweiligen Endpunkte mit den Ausgängen des Kopplers |
| 1668 |
% zusammenfallen. |
| 1669 |
% |
| 1670 |
% Die Schreibweise \opt{(A|E)} nimmt die $x$-Koordinate von \prm{A} und die |
| 1671 |
% $y$-Koordinate von \prm{E}. |
| 1672 |
% \fi |
| 1673 |
% \ifENGLISH |
| 1674 |
% At the ends of the coupler we put an optical spectrum analyzer (OSA) |
| 1675 |
% and a power meter (PD). The \Lcomp{optdetector} is set by default at the |
| 1676 |
% end of the reference line, it has \Lkeyword{position} preset to |
| 1677 |
% \opt{end}. These two components are drawn without fibers, because |
| 1678 |
% their end nodes coincide with the two outputs of the coupler. |
| 1679 |
% |
| 1680 |
% The notation \opt{(A|E)} uses the $x$-coordinate of \prm{A} and the |
| 1681 |
% $y$-coordinate of \prm{E}. |
| 1682 |
% \fi |
| 1683 |
% \iffalse |
| 1684 |
%<*ignore> |
| 1685 |
% \fi |
| 1686 |
\begin{LTXexample}[style=example, caption={caption}, label={ex:fiber-setup}, linerange={1-8,10-10}] |
| 1687 |
*\ON*\begin{pspicture}[showgrid](4.7,2) |
| 1688 |
\pnodes(0.7,1){A}(1,1){B}(2.8,1){C}(4,1.5){D}(4,0.5){E} |
| 1689 |
\psset{optboxwidth=0.7, labelstyle=\scriptsize} |
| 1690 |
\optbox[position=start, label=0, fiber](A)(B){LD} |
| 1691 |
\optmzm(B)(C) |
| 1692 |
\wdmsplitter[abspos=0.3, label=0.4](C)(D)(E){50\%}*\OFF* |
| 1693 |
\optbox[position=end, label=0](A|D)(D){OSA} |
| 1694 |
\optdetector(A|E)(E){PD}*\ON* |
| 1695 |
\psset{style=Refline}\psdot(A)\psdot(B)\psdot(C)\psdot(D)\psdot(E) |
| 1696 |
\end{pspicture}*\OFF* |
| 1697 |
\end{LTXexample} |
| 1698 |
% \iffalse |
| 1699 |
%</ignore> |
| 1700 |
% \fi |
| 1701 |
% |
| 1702 |
% \ifGERMAN\subsection{Faseraufbau (Alternative)}\fi |
| 1703 |
% \ifENGLISH\subsection{Fiber setup (alternative)}\fi |
| 1704 |
% |
| 1705 |
% \ifGERMAN |
| 1706 |
% Dieses Beispiel ist vom Ergebnis her identisch mit dem vorangegangenen |
| 1707 |
% (\prettyref{ex:fiber-setup}), wird aber anders angegangen. |
| 1708 |
% |
| 1709 |
% Hier verwenden wir nicht die automatischen Faserverbindungen sondern zeichnen, |
| 1710 |
% wie bei Freistrahlaufbauten, zuerst die Komponenten und verbinden diese zum |
| 1711 |
% Schluß explizit mit Fasern (\Lcs{drawfiber}). Daher benötigen wir weniger |
| 1712 |
% Referenzknoten, die Faserverbindungen werden mit \Lkeyword{fiber}\opt{=none} |
| 1713 |
% global unterdrückt. |
| 1714 |
% |
| 1715 |
% Welche Herangehensweise verwendet wird ist meistens Geschmackssache, bei |
| 1716 |
% Ringstrukturen wie z.B. Faserlasern kann das nachträgliche Verbinden mit |
| 1717 |
% \Lcs{drawfiber} von Vorteil sein. |
| 1718 |
% \fi |
| 1719 |
% |
| 1720 |
% \ifENGLISH |
| 1721 |
% This example has the same result as the previous one |
| 1722 |
% (\prettyref{ex:fiber-setup}), but is constructed differently. |
| 1723 |
% |
| 1724 |
% This time we do not use the automatic fiber connections, but draw all |
| 1725 |
% components first and connect them afterwards with fibers |
| 1726 |
% (\Lcs{drawfiber}). This requires less reference nodes, the fiber connections |
| 1727 |
% are suppressed globally with \Lkeyword{fiber}\opt{=none}. |
| 1728 |
% |
| 1729 |
% The choice of the procedure depends on personal preferences, for loop setups, |
| 1730 |
% like for fiber lasers, it looks better if the fibers are drawn after the |
| 1731 |
% components with \Lcs{drawfiber}. |
| 1732 |
% \fi |
| 1733 |
% \iffalse |
| 1734 |
%<*ignore> |
| 1735 |
% \fi |
| 1736 |
\begin{LTXexample}[caption={caption}, label={ex:fiber-setup-alt}, linerange={1-10,13-13}] |
| 1737 |
\begin{pspicture}[showgrid](4.9,2) |
| 1738 |
\pnode(0.7,1){A}\pnode(4,1){B} |
| 1739 |
\psset{optboxwidth=0.7, labelstyle=\scriptsize, fiber=none} |
| 1740 |
\optbox[position=start, labeloffset=0](A)(B){LD} |
| 1741 |
\optmzm[abspos=1.1](A)(B) |
| 1742 |
\wdmsplitter[abspos=2.25, label=0.4](A)(B)(B){50\%} |
| 1743 |
\optbox[position=end,label=0, compshift=0.5](A)(B){OSA} |
| 1744 |
\optdetector[compshift=-0.5](A)(B){PD} |
| 1745 |
\drawfiber{1-4} |
| 1746 |
\drawfiber{3}{5} |
| 1747 |
\psset{style=Refline}\psdot(A)\psdot(B) |
| 1748 |
\color{Refline}\uput[45](A){A}\uput[135](B){B} |
| 1749 |
\end{pspicture} |
| 1750 |
\end{LTXexample} |
| 1751 |
% \endgroup |
| 1752 |
% \iffalse |
| 1753 |
%</ignore> |
| 1754 |
% \fi |
| 1755 |
% |
| 1756 |
% \ifGERMAN |
| 1757 |
% \newpage |
| 1758 |
% \subsection{Michelson-Interferometer} |
| 1759 |
% \fi |
| 1760 |
% \ifENGLISH |
| 1761 |
% \subsection{Michelson-Interferometer} |
| 1762 |
% \fi |
| 1763 |
% |
| 1764 |
% \ifGERMAN |
| 1765 |
% In diesem Beispiel werden neben Linsen auch reflektierende Elemente |
| 1766 |
% (Spiegel) eingesetzt sowie Elemente, die sowohl transmittieren als |
| 1767 |
% auch reflektieren (Strahlteiler). |
| 1768 |
% \fi |
| 1769 |
% \ifENGLISH |
| 1770 |
% In this example we use lenses, reflective elements (mirrors) and components |
| 1771 |
% which can be either transmittive or reflective (beamsplitter). |
| 1772 |
% \fi |
| 1773 |
% |
| 1774 |
% \iffalse |
| 1775 |
%<*ignore> |
| 1776 |
% \fi |
| 1777 |
\begingroup |
| 1778 |
\catcode`\*=13 |
| 1779 |
\def*{}% |
| 1780 |
\begin{LTXexample}[style=example, hsep=8mm, numbers=left, numberstyle=\footnotesize, caption={caption}, label=ex:michelson] |
| 1781 |
\begin{pspicture}(3.2,5) |
| 1782 |
\pnodes(0,3){A}(1,3){BS}(3,3){M1}(1,5){M2}(1,1){PD}*\label{l:ex2-nodes}* |
| 1783 |
\psset{mirrortype=extended, mirrordepth=0.2}*\label{l:ex2-set}* |
| 1784 |
\begin{optexp}*\label{l:ex2-begin}* |
| 1785 |
\beamsplitter[bsstyle=plate, compname=BS](A)(BS)(PD)*\label{l:ex2-bs}* |
| 1786 |
\mirror[compname=M1](BS)(M1)(BS)*\label{l:ex2-m1}* |
| 1787 |
\mirror[compname=M2, variable](BS)(M2)(BS)*\label{l:ex2-m2}* |
| 1788 |
\lens[compname=L](BS)(PD)*\label{l:ex2-l}* |
| 1789 |
\optdetector[compname=Det, dettype=diode](BS)(PD)*\label{l:ex2-det}* |
| 1790 |
\addtopsstyle{Beam}{beamwidth=0.2, fillstyle=solid, fillcolor=green!20!white}*\label{l:ex2-style}* |
| 1791 |
\drawwidebeam(A){BS}{M1}{BS}{M2}{BS}{L}{Det}*\label{l:ex2-beam}* |
| 1792 |
\end{optexp} |
| 1793 |
\end{pspicture} |
| 1794 |
\end{LTXexample} |
| 1795 |
\endgroup |
| 1796 |
% \iffalse |
| 1797 |
%</ignore> |
| 1798 |
% \fi |
| 1799 |
% |
| 1800 |
% \ifGERMAN |
| 1801 |
% Wir beginnen wieder, indem wir die Referenzknoten definieren |
| 1802 |
% (\prettyref{l:ex2-nodes}) und ein paar |
| 1803 |
% grundlegende Einstellungen setzen (\prettyref{l:ex2-set}). |
| 1804 |
% |
| 1805 |
% Dann werden der Reihe nach alle Komponenten platziert |
| 1806 |
% (\prettyref{l:ex2-bs}--\ref{l:ex2-det}). Die reflektierenden benötigen |
| 1807 |
% drei Referenzknoten: den Eingangsknoten, den Knoten an dem die |
| 1808 |
% reflektierende Grenzfläche ist und den Ausgangsknoten. Anschließend |
| 1809 |
% wird noch das Aussehen des Lichtstrahls festgelegt |
| 1810 |
% (\prettyref{l:ex2-style}) und der Strahl gezeichnet |
| 1811 |
% (\prettyref{l:ex2-beam}). |
| 1812 |
% |
| 1813 |
% Diese Mal haben wir den Komponenten Namen gegeben (\Lkeyword{compname}) die |
| 1814 |
% beim Raytracing anstelle der IDs -- der automatisch vergebenen Nummern -- |
| 1815 |
% verwendet werden können. Dies kann die Nachverfolgung des Strahlengangs |
| 1816 |
% erleichtern. |
| 1817 |
% |
| 1818 |
% Alle Komponenten und Strahlen wurden zusätzlich in eine |
| 1819 |
% \Lenv{optexp}-Umgebung gekapselt. Innerhalb dieser werden alle |
| 1820 |
% Lichtstrahlen hinter die Komponenten gelegt, sodass diese nicht |
| 1821 |
% verdeckt werden. |
| 1822 |
% \fi |
| 1823 |
% \ifENGLISH |
| 1824 |
% We start with definition of the reference nodes |
| 1825 |
% (\prettyref{l:ex2-nodes}) and setting some basic |
| 1826 |
% parameters (\prettyref{l:ex2-set}). |
| 1827 |
% |
| 1828 |
% Following, all components are positioned |
| 1829 |
% (\prettyref{l:ex2-bs}--\ref{l:ex2-det}). The reflective ones need three |
| 1830 |
% reference nodes, the input node, the node where the reflective interface is |
| 1831 |
% situated, and the output node. Then, the appearance of the beam is set |
| 1832 |
% (\prettyref{l:ex2-style}), and the beam is drawn (\prettyref{l:ex2-beam}). |
| 1833 |
% |
| 1834 |
% In this example, all components have a name (\Lkeyword{compname}), which can |
| 1835 |
% be used instead of the numerical IDs---automatically assigned, unique |
| 1836 |
% numbers---for the raytracing. This can simplify follwing the beam path. |
| 1837 |
% |
| 1838 |
% All components and beams are enclosed in a \Lenv{optexp} environment. Inside |
| 1839 |
% of this, all beams are drawn behind the components. |
| 1840 |
% \fi |
| 1841 |
% |
| 1842 |
% |
| 1843 |
% \ifGERMAN\chapter{Allgemeine Komponentenparameter}\fi |
| 1844 |
% \ifENGLISH\chapter{General component parameters}\fi |
| 1845 |
% \label{chap:generalparam} |
| 1846 |
% |
| 1847 |
% \ifGERMAN Dieses Kapitel enthält alle Informationen zu allgemeinen Parametern |
| 1848 |
% und Konzepten. Das beinhaltet das Setzen von Beschriftungen |
| 1849 |
% (\ref{sec:labels}), Positionierung (\ref{sec:positioning}), Drehen und |
| 1850 |
% Verschieben von Komponenten (\ref{sec:rotshift}) und Anpassen der Aussehens |
| 1851 |
% (\ref{sec:styles} und \ref{sec:appearance}). |
| 1852 |
% \fi |
| 1853 |
% \ifENGLISH This chapter introduces generic parameters and concepts such as |
| 1854 |
% labels (\ref{sec:labels}), positioning (\ref{sec:positioning}), rotating and |
| 1855 |
% shifting of components (\ref{sec:rotshift}) and changing the appearance of |
| 1856 |
% components (\ref{sec:styles} and \ref{sec:appearance}). |
| 1857 |
% \fi |
| 1858 |
% |
| 1859 |
% \ifGERMAN\section{Beschriftungen}\fi |
| 1860 |
% \ifENGLISH\section{Labels}\fi |
| 1861 |
% \label{sec:labels} |
| 1862 |
% |
| 1863 |
% \ifGERMAN Alle Komponenten können mit einer Beschriftung versehen werden, |
| 1864 |
% deren Position und Ausrichtung genau angepasst werden kann. Die Beschriftung |
| 1865 |
% ist für jede Komponente optional. Sollten die vielfältigen Parameter nicht |
| 1866 |
% ausreichend sein, können Sie den Beschriftungsknoten -- in einigen Beispielen |
| 1867 |
% mit einem roten Punkt gekennzeichnet -- auch direkt verwenden (siehe auch |
| 1868 |
% \prettyref{sec:labelnode}). |
| 1869 |
% \fi |
| 1870 |
% \ifENGLISH All components may have a label which position and alignment can be |
| 1871 |
% adjusted at will. The label is optional for every component. If the various |
| 1872 |
% parameters are not sufficient, you can access the label node---marked as red |
| 1873 |
% dot in some examples---directly (see also \prettyref{sec:labelnode}). |
| 1874 |
% \fi |
| 1875 |
% |
| 1876 |
% \begin{optionlist} |
| 1877 |
% \numitem[0.8]{labeloffset} |
| 1878 |
% \ifGERMAN Der Abstand des Referenzknotens für die Beschriftung (roter |
| 1879 |
% Punkt) zur Komponentenmitte (blaues Kreuz). |
| 1880 |
% \fi |
| 1881 |
% \ifENGLISH The offset of the label reference node (red dot) from the |
| 1882 |
% component center (blue cross). |
| 1883 |
% \fi |
| 1884 |
% \iffalse |
| 1885 |
%<*ignore> |
| 1886 |
% \fi |
| 1887 |
\begin{LTXexample}[linerange={1-2,6-6}, morekeywords={[21]{labeloffset}}] |
| 1888 |
\begin{pspicture}(3,1.8) |
| 1889 |
\optbox[beam, labeloffset=1](0,1.5)(3,0.8){label} |
| 1890 |
\psdot[style=CenterNode](\oenodeCenter{}) |
| 1891 |
\psdot[linecolor=red](\oenodeLabel{}) |
| 1892 |
\ncline[arrows=<->, style=Refline, arrowinset=0, arrowscale=1.5]{\oenodeCenter{}}{\oenodeLabel{}} |
| 1893 |
\end{pspicture} |
| 1894 |
\end{LTXexample} |
| 1895 |
% \iffalse |
| 1896 |
%</ignore> |
| 1897 |
% \fi |
| 1898 |
% |
| 1899 |
% \valitem{labelstyle}{macros} |
| 1900 |
% \ifGERMAN Der Schriftstil der Beschriftungen.\fi |
| 1901 |
% \ifENGLISH The text style that is used to typeset the label.\fi |
| 1902 |
% |
| 1903 |
% \valitem[c]{labelalign}{refpoint} |
| 1904 |
% \ifGERMAN Definiert die Ausrichtung der Beschriftung bezüglich des |
| 1905 |
% Beschriftungsknotens. |
| 1906 |
% \fi |
| 1907 |
% \ifENGLISH Defines the alignment of the label relative to the label node. |
| 1908 |
% \fi |
| 1909 |
% \iffalse |
| 1910 |
%<*ignore> |
| 1911 |
% \fi |
| 1912 |
\begin{LTXexample}[linerange={1-3,6-6}, morekeywords={[21]{labeloffset, labelalign}}] |
| 1913 |
\begin{pspicture}(3,1.8) |
| 1914 |
\psset{beam, labeloffset=1} |
| 1915 |
\optbox[labelalign=bl](0,1.5)(3,0.8){label} |
| 1916 |
\psdot[style=CenterNode](\oenodeCenter{}) |
| 1917 |
\psdot[linecolor=red](\oenodeLabel{}) |
| 1918 |
\end{pspicture} |
| 1919 |
\end{LTXexample} |
| 1920 |
% \iffalse |
| 1921 |
%</ignore> |
| 1922 |
% \fi |
| 1923 |
% \numitem[0]{labelangle} |
| 1924 |
% \ifGERMAN |
| 1925 |
% Der Rotationswinkel des Beschriftungsknotens um die Mitte. Der Nullpunkt hängt |
| 1926 |
% sowohl von der jeweiligen Komponenten und dem gewählten Referenzsystem ab |
| 1927 |
% (siehe \Lkeyword{labelref}). |
| 1928 |
% \fi |
| 1929 |
% \ifENGLISH |
| 1930 |
% The rotation angle of the label node around the component center. The origin |
| 1931 |
% depends both on the component and the choosen reference system (see |
| 1932 |
% \Lkeyword{labelref}). |
| 1933 |
% \fi |
| 1934 |
% |
| 1935 |
% \iffalse |
| 1936 |
%<*ignore> |
| 1937 |
% \fi |
| 1938 |
\begin{LTXexample}[linerange={1-2,4-6,27-27}, morekeywords={[21]{labelangle}}] |
| 1939 |
\begin{pspicture}(-0.3,0)(2,3.7) |
| 1940 |
\psset{labeloffset=1, optboxwidth=1, arrowscale=1.5, arrowinset=0} |
| 1941 |
\begin{optexp} |
| 1942 |
\optbox[position=end, labelangle=90](1,1)(1,2){Box} |
| 1943 |
\beamsplitter[labelangle=-90](1,2)(1,1)(2,1){BS} |
| 1944 |
\drawbeam[arrows=->]{1}{2}(2,1) |
| 1945 |
\frontlayer{% |
| 1946 |
\psdot[style=CenterNode](\oenodeCenter{1}) |
| 1947 |
\psdot[style=CenterNode](\oenodeCenter{2}) |
| 1948 |
\psdot[linecolor=red](\oenodeLabel{1}) |
| 1949 |
\psdot[linecolor=red](\oenodeLabel{2}) |
| 1950 |
} |
| 1951 |
\backlayer{% |
| 1952 |
\bgroup |
| 1953 |
\psset{style=Refline} |
| 1954 |
\psline(\oenodeCenter{2})([offset=-1]\oenodeCenter{2}) |
| 1955 |
\psline(\oenodeCenter{2})([Xnodesep=-1]\oenodeCenter{2}) |
| 1956 |
\psarc[arrows=<-](\oenodeCenter{2}){0.7}{180}{270} |
| 1957 |
\uput{0.9}[-135](\oenodeCenter{2}){\small $-90$\textdegree} |
| 1958 |
\psline(\oenodeCenter{1})([Xnodesep=1]\oenodeCenter{1}) |
| 1959 |
\psline(\oenodeCenter{1})([offset=1]\oenodeCenter{1}) |
| 1960 |
\psarc[arrows=->](\oenodeCenter{1}){0.7}{0}{90} |
| 1961 |
\uput{0.9}[45](\oenodeCenter{1}){\small $90$\textdegree} |
| 1962 |
\egroup |
| 1963 |
} |
| 1964 |
\end{optexp} |
| 1965 |
\end{pspicture} |
| 1966 |
\end{LTXexample} |
| 1967 |
% \iffalse |
| 1968 |
%</ignore> |
| 1969 |
% \fi |
| 1970 |
% |
| 1971 |
% \choitem[relgrav]{labelref}{relative, relgrav, global, absolute} |
| 1972 |
% \ifGERMAN |
| 1973 |
% Wählt das Bezugssystem für \Lkeyword{labelangle} und die Orientierung der |
| 1974 |
% Beschriftung. |
| 1975 |
% \fi |
| 1976 |
% \ifENGLISH |
| 1977 |
% Set the reference coordinate system for the \Lkeyword{labelangle} and the |
| 1978 |
% orientation of the label text. |
| 1979 |
% \fi |
| 1980 |
% |
| 1981 |
% \begin{valuelist} |
| 1982 |
% \item[relative] |
| 1983 |
% \ifGERMAN Die Beschriftung ist parallel zu der Referenzlinie der |
| 1984 |
% Komponente und der Winkel wird immer auf den Bereich zwischen $-90$° und |
| 1985 |
% $+90$° zurückgerechnet. |
| 1986 |
% \fi |
| 1987 |
% \ifENGLISH The label is parallel to the component reference line and the |
| 1988 |
% actual angle is always projected to the range between $-90$° and $+90$°. |
| 1989 |
% \fi |
| 1990 |
% \iffalse |
| 1991 |
%<*ignore> |
| 1992 |
% \fi |
| 1993 |
\begin{LTXexample}[morekeywords={[21]{labelref}}] |
| 1994 |
\begin{pspicture}(0,-2.2)(2,2.2) |
| 1995 |
\psset{position=end, optboxsize=1 0.6, labeloffset=0, labelref=relative} |
| 1996 |
\multido{\i=0+45}{8}{% |
| 1997 |
\optbox(0,0)(1;\i){\i} |
| 1998 |
} |
| 1999 |
\end{pspicture} |
| 2000 |
\end{LTXexample} |
| 2001 |
% \iffalse |
| 2002 |
%</ignore> |
| 2003 |
% \fi |
| 2004 |
% |
| 2005 |
% \item[relgrav] |
| 2006 |
% \ifGERMAN Die Beschriftung ist immer horizontal, lediglich der |
| 2007 |
% Beschriftungsknoten wird zusammen mit der Komponente gedreht. |
| 2008 |
% \fi |
| 2009 |
% \ifENGLISH The label itself is always horizontal, only the label node is |
| 2010 |
% rotated together with the component. |
| 2011 |
% \fi |
| 2012 |
% \iffalse |
| 2013 |
%<*ignore> |
| 2014 |
% \fi |
| 2015 |
\begin{LTXexample}[morekeywords={[21]{labelref}}] |
| 2016 |
\begin{pspicture}(0,-2.2)(2,2.2) |
| 2017 |
\psset{position=end, optboxsize=1 0.6, labelref=relgrav} |
| 2018 |
\multido{\i=0+72}{5}{% |
| 2019 |
\optbox(0,0)(1;\i){\i} |
| 2020 |
} |
| 2021 |
\end{pspicture} |
| 2022 |
\end{LTXexample} |
| 2023 |
% \iffalse |
| 2024 |
%</ignore> |
| 2025 |
% \fi |
| 2026 |
% |
| 2027 |
% \item[global, absolute] |
| 2028 |
% \ifGERMAN Die Beschriftung ist unabhängig von der Komponentenausrichtung.\fi |
| 2029 |
% \ifENGLISH The label is independent of the component alignment.\fi |
| 2030 |
% \iffalse |
| 2031 |
%<*ignore> |
| 2032 |
% \fi |
| 2033 |
\begin{LTXexample}[morekeywords={[21]{labelref}}] |
| 2034 |
\begin{pspicture}(0,-2.2)(2,2.2) |
| 2035 |
\psset{position=end, optboxsize=1 0.6, labelref=global} |
| 2036 |
\multido{\i=0+72}{5}{% |
| 2037 |
\optbox(0,0)(1;\i){\i} |
| 2038 |
} |
| 2039 |
\end{pspicture} |
| 2040 |
\end{LTXexample} |
| 2041 |
% \iffalse |
| 2042 |
%</ignore> |
| 2043 |
% \fi |
| 2044 |
% \end{valuelist} |
| 2045 |
% |
| 2046 |
% \optitem{label}{\prm{offset}[ \prm{angle}[ \prm{refpoint}[ \prm{labelref}]]]} |
| 2047 |
% \ifGERMAN |
| 2048 |
% Diese Option erlaubt die kompakte Definition mehrerer |
| 2049 |
% Beschriftungsparameter. Es können bis zu vier Leerzeichen-getrennte |
| 2050 |
% Argumente übergeben werden (\Lkeyword{labeloffset}, |
| 2051 |
% \Lkeyword{labelangle}, \Lkeyword{labelalign} und |
| 2052 |
% \Lkeyword{labelref}). Mit einem Punkt kann eine Option übersprungen |
| 2053 |
% werden. |
| 2054 |
% \fi |
| 2055 |
% \ifENGLISH |
| 2056 |
% Allows compact definition of several label parameters. It takes up to |
| 2057 |
% four space-separated arguments (\Lkeyword{labeloffset}, |
| 2058 |
% \Lkeyword{labelangle}, \Lkeyword{labelalign}, and |
| 2059 |
% \Lkeyword{labelref}). Unchanged intermediate arguments can be |
| 2060 |
% skipped with a dot. |
| 2061 |
% \fi |
| 2062 |
% \iffalse |
| 2063 |
%<*ignore> |
| 2064 |
% \fi |
| 2065 |
\begin{LTXexample}[morekeywords={[21]{label}}] |
| 2066 |
\begin{pspicture}(0,0)(4,3) |
| 2067 |
\psset{endbox, beam} |
| 2068 |
\optbox[label=0.7](1.5,2.5)(2.5,2.5){box} |
| 2069 |
\optbox[label=1 -45](1.5,1)(2.5,1){$-45$} |
| 2070 |
\optbox[label=0 . . relative]% |
| 2071 |
(0.6,0.6)(0.6,1.6){relative} |
| 2072 |
\end{pspicture} |
| 2073 |
\end{LTXexample} |
| 2074 |
% \iffalse |
| 2075 |
%</ignore> |
| 2076 |
% \fi |
| 2077 |
% \choitem{innerlabel}{true} |
| 2078 |
% \ifGERMAN Das ist ein Alias für \opt{label=0 .\ c relative}\fi |
| 2079 |
% \ifENGLISH This is an alias for \opt{label=0 .\ c relative}\fi |
| 2080 |
% \end{optionlist} |
| 2081 |
% |
| 2082 |
% |
| 2083 |
% |
| 2084 |
% \ifGERMAN\section{Positionierung}\fi |
| 2085 |
% \ifENGLISH\section{Positioning}\fi |
| 2086 |
% \label{sec:positioning} |
| 2087 |
% |
| 2088 |
% \ifGERMAN |
| 2089 |
% Alle Komponenten außer den Freistrahl-Dreipolen können zwischen ihren |
| 2090 |
% beiden Referenzknoten \Lcs{oenodeRefA} und \Lcs{oenodeRefB} |
| 2091 |
% positioniert werden. |
| 2092 |
% \fi |
| 2093 |
% \ifENGLISH |
| 2094 |
% All components except for the free-ray tripoles can be positioned between |
| 2095 |
% their two reference nodes \Lcs{oenodeRefA} and \Lcs{oenodeRefB}. |
| 2096 |
% \fi |
| 2097 |
% \begin{optionlist} |
| 2098 |
% \choitem{position}{\prm{num},start,end} |
| 2099 |
% \ifGERMAN |
| 2100 |
% Ist der Wert eine Zahl, so wird damit die relative Position der Mitte eines |
| 2101 |
% Objektes (blaues Kreuz) bezüglich seiner beiden Referenzknoten (schwarze |
| 2102 |
% Punkte) gesetzt. Das ist äquivalent zum \Lkeyword*{npos} Parameter von |
| 2103 |
% \Lcs*{ncput}, d.h. eine Zahl im Intervall $[0,1]$ (siehe \LPack{pst-node} |
| 2104 |
% Dokumentation\fnurl{http://mirror.ctan.org/help/Catalogue/entries/pst-node.html}). |
| 2105 |
% \fi |
| 2106 |
% \ifENGLISH Controls the relative position of an object center (blue cross) |
| 2107 |
% between its two reference points (black dots), if the value is a number. In |
| 2108 |
% this case it is equivalent to the \Lkeyword*{npos} parameter of |
| 2109 |
% \Lcs*{ncput}, i.e. a number in the range $[0,1]$ (see \LPack{pst-node} |
| 2110 |
% documentation\fnurl{http://mirror.ctan.org/help/Catalogue/entries/pst-node.html}). |
| 2111 |
% \fi |
| 2112 |
% \iffalse |
| 2113 |
%<*ignore> |
| 2114 |
% \fi |
| 2115 |
\begin{LTXexample}[morekeywords={[21]{position}}, linerange={1-2,5-5}] |
| 2116 |
\begin{pspicture}(3,1.5) |
| 2117 |
\lens[beam, position=0.8](0,1)(3,1){L} |
| 2118 |
\psdot(\oenodeRefA{})\psdot(\oenodeRefB{}) |
| 2119 |
\psdot[style=CenterNode](\oenodeCenter{}) |
| 2120 |
\end{pspicture} |
| 2121 |
\end{LTXexample} |
| 2122 |
% \iffalse |
| 2123 |
%</ignore> |
| 2124 |
% \fi |
| 2125 |
% |
| 2126 |
% \ifGERMAN |
| 2127 |
% Der Wert \opt{start} setzt ein Objekt an den Anfang, \opt{end} ans Ende der |
| 2128 |
% Referenzlinie, so dass die entsprechende Grenzfläche auf dem Referenzknoten |
| 2129 |
% (schwarzer Punkt) liegt, und nicht die Mitte des Objektes (blaues Kreuz), wie |
| 2130 |
% es mit \opt{position=1} bzw. \opt{position=0} der Fall wäre. Unter Verwendung |
| 2131 |
% von Zahlen wäre dieses Verhalten deutlich schwieriger und weniger flexibel zu |
| 2132 |
% erreichen, da die Größe und Form des Objektes berücksichtigt werden muss. |
| 2133 |
% \fi |
| 2134 |
% \ifENGLISH |
| 2135 |
% The values \opt{start} and \opt{end} place an object at the start or end of |
| 2136 |
% the reference line, respectively. The respective object interface is placed on |
| 2137 |
% the respective reference node (black dot) instead of the object center (blue |
| 2138 |
% cross) which would be the case for \opt{position=0} or |
| 2139 |
% \opt{position=1}. Achieving this with numerical values would me more difficult |
| 2140 |
% and unflexible, because the object size and shape must be taken into account. |
| 2141 |
% \fi |
| 2142 |
% \iffalse |
| 2143 |
%<*ignore> |
| 2144 |
% \fi |
| 2145 |
\begin{LTXexample}[morekeywords={[21]{position}}, linerange={1-4,8-8}] |
| 2146 |
\begin{pspicture}(3,2) |
| 2147 |
\pnodes(0.5,1){A}(2.5,1){B}\psdot(A)\psdot(B) |
| 2148 |
\optbox[optboxsize=0.5 0.5, position=start](A)(B) |
| 2149 |
\lens[position=end](A)(B) |
| 2150 |
\psline[style=Refline](A)(B) |
| 2151 |
\psdot[style=CenterNode](\oenodeCenter{1}) |
| 2152 |
\psdot[style=CenterNode](\oenodeCenter{2}) |
| 2153 |
\end{pspicture} |
| 2154 |
\end{LTXexample} |
| 2155 |
% \iffalse |
| 2156 |
%</ignore> |
| 2157 |
% \fi |
| 2158 |
% |
| 2159 |
% \ifGERMAN Hier ist im Vergleich dazu die Positionierung mit |
| 2160 |
% \opt{position=0}/\opt{1}. |
| 2161 |
% \fi |
| 2162 |
% \ifENGLISH Here is for comparison the positioning with |
| 2163 |
% \opt{position=0}/\opt{1}. |
| 2164 |
% \fi |
| 2165 |
% \iffalse |
| 2166 |
%<*ignore> |
| 2167 |
% \fi |
| 2168 |
\begin{LTXexample}[morekeywords={[21]{position}}, linerange={1-4,8-8}] |
| 2169 |
\begin{pspicture}(3,2) |
| 2170 |
\pnodes(0.5,1){A}(2.5,1){B}\psdot(A)\psdot(B) |
| 2171 |
\optbox[optboxsize=0.5 0.5, position=0](A)(B) |
| 2172 |
\lens[position=1](A)(B) |
| 2173 |
\psline[style=Refline](A)(B) |
| 2174 |
\psdot[style=CenterNode](\oenodeCenter{1}) |
| 2175 |
\psdot[style=CenterNode](\oenodeCenter{2}) |
| 2176 |
\end{pspicture} |
| 2177 |
\end{LTXexample} |
| 2178 |
% \iffalse |
| 2179 |
%</ignore> |
| 2180 |
% \fi |
| 2181 |
% |
| 2182 |
% \choitem{abspos}{\prm{num},start,end} |
| 2183 |
% \ifGERMAN |
| 2184 |
% Eine Zahl setzt die absolute Position eines Objektes auf der |
| 2185 |
% Referenzlinie. Die Werte \opt{start} und \opt{end} werden identisch wie bei |
| 2186 |
% \Lkeyword{position} behandelt. |
| 2187 |
% \fi |
| 2188 |
% \ifENGLISH |
| 2189 |
% Controls the absolute position of an object on the reference line. The values |
| 2190 |
% \opt{start} and \opt{end} are handled identically to \Lkeyword{position}. |
| 2191 |
% \fi |
| 2192 |
% \iffalse |
| 2193 |
%<*ignore> |
| 2194 |
% \fi |
| 2195 |
\begin{LTXexample}[morekeywords={[21]{abspos}}, linerange={1-2,5-5}] |
| 2196 |
\begin{pspicture}(3,1.5) |
| 2197 |
\lens[beam, abspos=1](0,1)(3,1){L} |
| 2198 |
\psdot(\oenodeRefA{})\psdot(\oenodeRefB{}) |
| 2199 |
\psdot[style=CenterNode](\oenodeCenter{}) |
| 2200 |
\end{pspicture} |
| 2201 |
\end{LTXexample} |
| 2202 |
% \iffalse |
| 2203 |
%</ignore> |
| 2204 |
% \fi |
| 2205 |
% |
| 2206 |
% \boolitem{endbox} |
| 2207 |
% \ifGERMAN Dieser Parameter sollte nicht mehr verwendet werden, er ist |
| 2208 |
% äquivalent zu \Lkeyword{position}\opt{=end}. |
| 2209 |
% \fi |
| 2210 |
% \ifENGLISH This parameter should not be used any more, it is |
| 2211 |
% equivalent to \Lkeyword{position}\opt{=end}. |
| 2212 |
% \fi |
| 2213 |
% \end{optionlist} |
| 2214 |
% |
| 2215 |
% |
| 2216 |
% |
| 2217 |
% \ifGERMAN\section{Drehen und Verschieben}\fi |
| 2218 |
% \ifENGLISH\section{Rotating and shifting}\fi |
| 2219 |
% \label{sec:rotshift} |
| 2220 |
% |
| 2221 |
% \ifGERMAN |
| 2222 |
% Alle Komponenten können versetzt und um verschiedene Bezugspunkte |
| 2223 |
% gedreht werden. |
| 2224 |
% |
| 2225 |
% Beachten Sie, dass mit den Komponenten auch die Grenzflächenknoten |
| 2226 |
% (\prettyref{sec:ifcnode}, in den folgenden Beispielen mit blauen Kreuzen |
| 2227 |
% markiert) transformiert werden, wodurch Verbindungen beinflußt werden. Die |
| 2228 |
% transformierten Referenzknoten sind als eigene Knoten verfügbar |
| 2229 |
% (\prettyref{sec:refnode}). |
| 2230 |
% \fi |
| 2231 |
% \ifENGLISH |
| 2232 |
% All components can be shifted and rotated around different reference nodes. |
| 2233 |
% |
| 2234 |
% Please note, that together with the components also their interface nodes |
| 2235 |
% (\prettyref{sec:ifcnode}, marked as blue crosses in the following examples) |
| 2236 |
% are transformed, which may impact the connections. The transformed reference |
| 2237 |
% nodes are accessible as new nodes (\prettyref{sec:refnode}). |
| 2238 |
% \fi |
| 2239 |
% |
| 2240 |
% \begin{optionlist} |
| 2241 |
% \psnumitem[0]{angle} |
| 2242 |
% \ifGERMAN Dreht eine Komponente um den Winkel \prm{num} (in Grad). Die |
| 2243 |
% Ausgangsposition ist grau gestrichelt eingezeichnet. |
| 2244 |
% \fi |
| 2245 |
% \ifENGLISH Rotate a component by an angle \prm{num} (in degree). The original |
| 2246 |
% position is drawn gray dashed. |
| 2247 |
% \fi |
| 2248 |
% \iffalse |
| 2249 |
%<*ignore> |
| 2250 |
% \fi |
| 2251 |
\begin{LTXexample}[linerange={1-2,4-4,10-10}, morekeywords={[21]{angle}}] |
| 2252 |
\begin{pspicture}(3,2) |
| 2253 |
\pnodes(0,1){A}(2.7,1){B} |
| 2254 |
\optbox[addtoOptComp={style=Refline, linestyle=dashed}](A)(B) |
| 2255 |
\optbox[angle=20, innerlabel](A)(B){box} |
| 2256 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 2257 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 2258 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 2259 |
\psdot[style=CenterNode](\oenodeIn{}) |
| 2260 |
\psdot[style=CenterNode](\oenodeOut{}) |
| 2261 |
\end{pspicture} |
| 2262 |
\end{LTXexample} |
| 2263 |
%\iffalse |
| 2264 |
%</ignore> |
| 2265 |
%\fi |
| 2266 |
% |
| 2267 |
% \valitem[c]{rotateref}{refpoint} |
| 2268 |
% \ifGERMAN |
| 2269 |
% Setzt den Bezugspunkt für die Drehung der Komponente. Bitte lesen Sie |
| 2270 |
% \prettyref{sec:rotrefnode} für eine genauere Beschreibung und entnehmen Sie |
| 2271 |
% \prettyref{sec:overview-extnode} die möglichen Bezugspunkte für alle |
| 2272 |
% Komponenten. Die Ausgangsposition ist grau gestrichelt eingezeichnet. |
| 2273 |
% \fi |
| 2274 |
% \ifENGLISH |
| 2275 |
% Set the reference point for the rotation of the component. Please see |
| 2276 |
% \prettyref{sec:rotrefnode} for a detailed explanation and |
| 2277 |
% \prettyref{sec:overview-extnode} for a list of the possible reference nodes of |
| 2278 |
% all components. The original position is drawn gray dashed. |
| 2279 |
% \fi |
| 2280 |
% \iffalse |
| 2281 |
%<*ignore> |
| 2282 |
% \fi |
| 2283 |
\begin{LTXexample}[linerange={1-2,4-4,10-10}, morekeywords={[21]{angle,rotateref}}] |
| 2284 |
\begin{pspicture}(3,2) |
| 2285 |
\pnodes(0,1){A}(2.7,1){B} |
| 2286 |
\optbox[addtoOptComp={style=Refline, linestyle=dashed}](A)(B) |
| 2287 |
\optbox[angle=20, rotateref=bl, innerlabel](A)(B){box} |
| 2288 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 2289 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 2290 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 2291 |
\psdot[style=CenterNode](\oenodeIn{}) |
| 2292 |
\psdot[style=CenterNode](\oenodeOut{}) |
| 2293 |
\end{pspicture} |
| 2294 |
\end{LTXexample} |
| 2295 |
%\iffalse |
| 2296 |
%</ignore> |
| 2297 |
%\fi |
| 2298 |
% |
| 2299 |
% \numitem[0]{compshift} |
| 2300 |
% \ifGERMAN Verschiebt eine Komponente vertikal bezüglich ihrer Referenzlinie |
| 2301 |
% (siehe \prettyref{sec:refnode}). Reflektive Komponenten werden entlang der |
| 2302 |
% reflektiven Grenzfläche verschoben. |
| 2303 |
% \fi |
| 2304 |
% \ifENGLISH |
| 2305 |
% Shift a component perpendicular to its reference line (see |
| 2306 |
% \prettyref{sec:refnode}). For reflective components it is shifted along the |
| 2307 |
% reflective interface. |
| 2308 |
% \fi |
| 2309 |
% \iffalse |
| 2310 |
%<*ignore> |
| 2311 |
% \fi |
| 2312 |
\begin{LTXexample}[linerange={1-3,10-10}, morekeywords={[21]{compshift}}] |
| 2313 |
\begin{pspicture}(4,2) |
| 2314 |
\pnodes(0.4, 0.5){A}(3.6,0.5){B} |
| 2315 |
\lens[lens=2 2 2, compshift=0.5](A)(B) |
| 2316 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}) |
| 2317 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 2318 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 2319 |
\psdot[style=CenterNode](\oenodeIn{}) |
| 2320 |
\psdot[style=CenterNode](\oenodeOut{}) |
| 2321 |
\psline[linecolor=DOrange, arrows=|->, arrowscale=1.5, arrowinset=0](\oenodeCenter{}|A)(\oenodeCenter{}) |
| 2322 |
\end{pspicture} |
| 2323 |
\end{LTXexample} |
| 2324 |
\begin{LTXexample}[linerange={1-3,9-9}, morekeywords={[21]{compshift}}] |
| 2325 |
\begin{pspicture}(4,2) |
| 2326 |
\pnodes(0.4,1.2){A}(3,0.2){B} |
| 2327 |
\mirror[compshift=0.5](A)(B|A)(B) |
| 2328 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}|\oenodeRefA{})(\oenodeRefB{}) |
| 2329 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 2330 |
\psdot(\oenodeRefB{})\uput[0](\oenodeRefB{}){RefB} |
| 2331 |
\psdot[style=CenterNode](\oenodeIn{}) |
| 2332 |
\psline[linecolor=DOrange, arrows=|->, arrowscale=1.5, arrowinset=0](B|A)(\oenodeCenter{}) |
| 2333 |
\end{pspicture} |
| 2334 |
\end{LTXexample} |
| 2335 |
% \iffalse |
| 2336 |
%</ignore> |
| 2337 |
% \fi |
| 2338 |
% |
| 2339 |
% \numitem[0]{compoffset} |
| 2340 |
% \ifGERMAN Verschiebt eine Komponente vertikal bezüglich ihrer |
| 2341 |
% Referenzlinie (siehe \prettyref{sec:refnode}). Reflektierende |
| 2342 |
% Komponenten werden entlang der reflektiven Grenzfläche verschoben. Die |
| 2343 |
% Verschiebung erfolgt also senkrecht zu einer Verschiebung mit |
| 2344 |
% \Lkeyword{compshift}. Ein Anwendungsbeispiel ist |
| 2345 |
% \prettyref{ex:autocorrelation}. |
| 2346 |
% \fi |
| 2347 |
% \ifENGLISH |
| 2348 |
% Shift a component perpendicular to its reference line (see |
| 2349 |
% \prettyref{sec:refnode}). For reflective components it is shifted |
| 2350 |
% along the reflective interface. The displacement is vertical to a |
| 2351 |
% displacement with \Lkeyword{compshift}. For an example see |
| 2352 |
% \prettyref{ex:autocorrelation}. |
| 2353 |
% \fi |
| 2354 |
% \iffalse |
| 2355 |
%<*ignore> |
| 2356 |
% \fi |
| 2357 |
\begin{LTXexample}[linerange={1-3,10-10}, morekeywords={[21]{compoffset}}] |
| 2358 |
\begin{pspicture}(4,2) |
| 2359 |
\pnodes(0.4, 1){A}(3.6, 1){B} |
| 2360 |
\lens[lens=2 2 2, compoffset=0.5](A)(B) |
| 2361 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}) |
| 2362 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 2363 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 2364 |
\psdot[style=CenterNode](\oenodeIn{}) |
| 2365 |
\psdot[style=CenterNode](\oenodeOut{}) |
| 2366 |
\psline[linecolor=DOrange, arrows=|->, arrowscale=1.5, arrowinset=0]([Xnodesep=-0.5]\oenodeCenter{})(\oenodeCenter{}) |
| 2367 |
\end{pspicture} |
| 2368 |
\end{LTXexample} |
| 2369 |
\begin{LTXexample}[linerange={1-3,9-9}, morekeywords={[21]{compoffset}}] |
| 2370 |
\begin{pspicture}(4,2) |
| 2371 |
\pnodes(0.4,1.2){A}(3,0.2){B} |
| 2372 |
\mirror[compoffset=0.5](A)(B|A)(B) |
| 2373 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}|\oenodeRefA{})(\oenodeRefB{}) |
| 2374 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 2375 |
\psdot(\oenodeRefB{})\uput[0](\oenodeRefB{}){RefB} |
| 2376 |
\psdot[style=CenterNode](\oenodeIn{}) |
| 2377 |
\psline[linecolor=DOrange, arrows=|->, arrowscale=1.5, arrowinset=0](B|A)(\oenodeCenter{}) |
| 2378 |
\end{pspicture} |
| 2379 |
\end{LTXexample} |
| 2380 |
% \iffalse |
| 2381 |
%</ignore> |
| 2382 |
% \fi |
| 2383 |
% \choitem{innercompalign}{rel, relative, abs, absolute} |
| 2384 |
% \ifGERMAN Ist dieser Parameter auf \opt{absolute} gesetzt, so wird das |
| 2385 |
% «Innere» einer Komponente nicht mitgedreht. Diese Option wird derzeit |
| 2386 |
% von \Lcomp{optfilter}, \Lcomp{elecsynthesizer} und \Lcomp{optdipole} verwendet. |
| 2387 |
% \fi |
| 2388 |
% \ifENGLISH If this parameter is set to \opt{absolute}, the «inner» |
| 2389 |
% component part is not rotated with the component. At the moment, this |
| 2390 |
% option is used by \Lcomp{optfilter}, \Lcomp{elecsynthesizer}, and \Lcomp{optdipole}. |
| 2391 |
% \fi |
| 2392 |
% \iffalse |
| 2393 |
%<*ignore> |
| 2394 |
% \fi |
| 2395 |
\begin{LTXexample} |
| 2396 |
\begin{pspicture}(3,2) |
| 2397 |
\psset[optexp]{labelangle=-90} |
| 2398 |
\elecsynthesizer[innercompalign=rel](0.5,1.2)(0.5,2){rel} |
| 2399 |
\elecsynthesizer[innercompalign=abs](2.5,1.2)(2.5,2){abs} |
| 2400 |
\end{pspicture} |
| 2401 |
\end{LTXexample} |
| 2402 |
% \iffalse |
| 2403 |
%</ignore> |
| 2404 |
% \fi |
| 2405 |
% \end{optionlist} |
| 2406 |
% |
| 2407 |
% |
| 2408 |
% \ifGERMAN\section{Verwendung von Stilen}\fi |
| 2409 |
% \ifENGLISH\section{Using psstyles}\fi\label{sec:styles} |
| 2410 |
% |
| 2411 |
% \ifGERMAN |
| 2412 |
% Stile sind benutzerdefinierte Grafik-Konfigurationen für |
| 2413 |
% PSTricks-Objekte. Das \LPack{pst-optexp}-Paket macht umfangreichen |
| 2414 |
% Gebrauch von Stilen um einzelne, logische Bereiche von Komponenten |
| 2415 |
% flexibel gestalten zu können, was über das optionale Argument meistens |
| 2416 |
% nicht möglich ist. |
| 2417 |
% |
| 2418 |
% Vorhandene Stile können mit \Lcs*{addtopsstyle} erweitert und mit |
| 2419 |
% \Lcs*{newpsstyle} überschrieben werden. |
| 2420 |
% |
| 2421 |
% Als Beispiel nehmen wir einen \opt{extended} Spiegel und möchten nur |
| 2422 |
% den «extended»-Teil verändern. Hierfür wird der Stil |
| 2423 |
% \Lstyle{ExtendedMirror} bereitgestellt: |
| 2424 |
% \fi |
| 2425 |
% \ifENGLISH |
| 2426 |
% Psstyles are custom graphics parameter configurations for PSTricks |
| 2427 |
% objects. The \LPack{pst-optexp} package makes extensive use of styles |
| 2428 |
% to facilitate flexible design of single, logical parts of |
| 2429 |
% components. This is in general not possible with the optional |
| 2430 |
% argument. |
| 2431 |
% |
| 2432 |
% Existing styles can be extended with \Lcs*{addtopsstyle} and |
| 2433 |
% overwritten with \Lcs*{newpsstyle}. |
| 2434 |
% |
| 2435 |
% As example we consider an \opt{extended} mirror and want to change |
| 2436 |
% only the «extended» part which is controlable with the |
| 2437 |
% \Lstyle{ExtendedMirror} style: |
| 2438 |
% \fi |
| 2439 |
% \iffalse |
| 2440 |
%<*ignore> |
| 2441 |
% \fi |
| 2442 |
\begin{LTXexample} |
| 2443 |
\begin{pspicture}(3,2) |
| 2444 |
\addtopsstyle{ExtendedMirror}{hatchcolor=red} |
| 2445 |
\mirror[mirrortype=extended, beam](0,0)(2,1.5)(0,2) |
| 2446 |
\end{pspicture} |
| 2447 |
\end{LTXexample} |
| 2448 |
% \iffalse |
| 2449 |
%</ignore> |
| 2450 |
% \fi |
| 2451 |
% \ifGERMAN |
| 2452 |
% Die veränderbaren Unterbereiche einer Komponente sind in der |
| 2453 |
% jeweiligen Referenz zu finden. |
| 2454 |
% \fi |
| 2455 |
% \ifENGLISH |
| 2456 |
% The changeable parts of each component are listed in the respective |
| 2457 |
% reference. |
| 2458 |
% \fi |
| 2459 |
% |
| 2460 |
% |
| 2461 |
% |
| 2462 |
% \ifGERMAN\section{Aussehen der Komponenten}\fi |
| 2463 |
% \ifENGLISH\section{Component appearance}\fi |
| 2464 |
% \label{sec:appearance} |
| 2465 |
% |
| 2466 |
% \begin{stylelist} |
| 2467 |
% \styleitem{OptComp} |
| 2468 |
% \ifGERMAN |
| 2469 |
% Bestimmt das grundlegende Aussehen aller optischen Komponenten. Die |
| 2470 |
% üblichen Parameter, wie z.B. \opt{linestyle}, würden auch die |
| 2471 |
% Verbindungen beeinflussen, die mit der Komponente zusammen gezeichnet |
| 2472 |
% werden (\Lkeyword{beam}, \Lkeyword{fiber} usw.). Mit |
| 2473 |
% \Lkeyword{newOptComp} und \Lkeyword{addtoOptComp} kann der Stil für |
| 2474 |
% einzelne Komponenten oder zusammen mit \Lcs*{newpsobject} im optionalen |
| 2475 |
% Argument verwendet werden. |
| 2476 |
% \fi |
| 2477 |
% \ifENGLISH |
| 2478 |
% Affects the basic appearence of all optical components. Using standard |
| 2479 |
% graphics parameters like e.g.\ \opt{linestyle} would change also the |
| 2480 |
% connections that are drawn together with the component |
| 2481 |
% (\Lkeyword{beam}, \Lkeyword{fiber} etc.). Use the key |
| 2482 |
% \Lkeyword{newOptComp} and \Lkeyword{addtoOptComp} to change the style |
| 2483 |
% for single components or for use with \Lcs*{newpsobject} via the |
| 2484 |
% optional argument. |
| 2485 |
% \fi |
| 2486 |
% \iffalse |
| 2487 |
%<*ignore> |
| 2488 |
% \fi |
| 2489 |
\ifGERMAN |
| 2490 |
\begin{LTXexample}[morekeywords={[21]{addtoOptComp}}] |
| 2491 |
\begin{pspicture}(2.5,4) |
| 2492 |
\psset{beam} |
| 2493 |
% falsch, die Strahlbreite wird auch geaendert |
| 2494 |
\mirror[linewidth=3\pslinewidth](0,3)(2,3)(2,2) |
| 2495 |
% korrektes Ergebnis |
| 2496 |
\addtopsstyle{OptComp}{linewidth=3\pslinewidth} |
| 2497 |
\mirror(0,1)(2,1)(2,0) |
| 2498 |
\end{pspicture} |
| 2499 |
\end{LTXexample} |
| 2500 |
\fi\ifENGLISH |
| 2501 |
\begin{LTXexample}[morekeywords={[21]{addtoOptComp}}] |
| 2502 |
\begin{pspicture}(2.5,4) |
| 2503 |
\psset{beam} |
| 2504 |
% wrong, also beam width is changed |
| 2505 |
\mirror[linewidth=3\pslinewidth](0,3)(2,3)(2,2) |
| 2506 |
% correct result |
| 2507 |
\addtopsstyle{OptComp}{linewidth=3\pslinewidth} |
| 2508 |
\mirror(0,1)(2,1)(2,0) |
| 2509 |
\end{pspicture} |
| 2510 |
\end{LTXexample} |
| 2511 |
\fi |
| 2512 |
% \iffalse |
| 2513 |
%</ignore> |
| 2514 |
% \fi |
| 2515 |
% |
| 2516 |
% \styleitem[linestyle=dashed,dash=1.5pt 1pt]{OptionalStyle} |
| 2517 |
% \ifGERMAN |
| 2518 |
% Der Stil wird zusätzlich zu \Lstyle{OptComp} auf Komponenten angewendet, |
| 2519 |
% die als \Lkeyword{optional} markiert sind. |
| 2520 |
% \fi |
| 2521 |
% \ifENGLISH |
| 2522 |
% This style is applied to components marked as \Lkeyword{optional} in addition |
| 2523 |
% to \Lstyle{OptComp}. |
| 2524 |
% \fi |
| 2525 |
% \iffalse |
| 2526 |
%<*ignore> |
| 2527 |
% \fi |
| 2528 |
\begin{LTXexample}[morekeywords={[21]{optional}}] |
| 2529 |
\begin{pspicture}(3,1.5) |
| 2530 |
\lens[optional, beam](0,1)(3,1) |
| 2531 |
\end{pspicture} |
| 2532 |
\end{LTXexample} |
| 2533 |
% \iffalse |
| 2534 |
%</ignore> |
| 2535 |
% \fi |
| 2536 |
% |
| 2537 |
% \ifGERMAN |
| 2538 |
% \Lstyle{OptionalStyle} wird nach \Lstyle{OptComp} angewendet, so dass |
| 2539 |
% einzelne Einstellungen überschrieben werden können. |
| 2540 |
% \fi |
| 2541 |
% \ifENGLISH |
| 2542 |
% \Lstyle{OptionalStyle} is applied after \Lstyle{OptComp} so that it |
| 2543 |
% can overwrite the general settings. |
| 2544 |
% \fi |
| 2545 |
% |
| 2546 |
% \iffalse |
| 2547 |
%<*ignore> |
| 2548 |
% \fi |
| 2549 |
\ifGERMAN |
| 2550 |
\begin{LTXexample}[morekeywords={[21]{OptComp, OptionalStyle, optional}}] |
| 2551 |
\begin{pspicture}(3,1.5) |
| 2552 |
\addtopsstyle{OptComp}{linewidth=3\pslinewidth, linecolor=red} |
| 2553 |
\newpsstyle{OptionalStyle}{linecolor=blue} |
| 2554 |
\lens(0,1)(2,1) |
| 2555 |
% Linienfarbe wird ueberschrieben, die Linienbreite nicht. |
| 2556 |
\lens[optional](0,1)(3,1) |
| 2557 |
\end{pspicture} |
| 2558 |
\end{LTXexample} |
| 2559 |
\fi\ifENGLISH |
| 2560 |
\begin{LTXexample}[morekeywords={[21]{OptComp, OptionalStyle, optional}}] |
| 2561 |
\begin{pspicture}(3,1.5) |
| 2562 |
\addtopsstyle{OptComp}{linewidth=3\pslinewidth, linecolor=red} |
| 2563 |
\newpsstyle{OptionalStyle}{linecolor=blue} |
| 2564 |
\lens(0,1)(2,1) |
| 2565 |
% linecolor overwritten, linewidth kept |
| 2566 |
\lens[optional](0,1)(3,1) |
| 2567 |
\end{pspicture} |
| 2568 |
\end{LTXexample} |
| 2569 |
\fi |
| 2570 |
% \iffalse |
| 2571 |
%</ignore> |
| 2572 |
% \fi |
| 2573 |
% |
| 2574 |
% \styleitem[linewidth=0.8\cs{pslinewidth}, arrowinset=0, arrowscale=0.8, arrows=<->]{VariableStyle} |
| 2575 |
% \ifGERMAN Der Stil der Pfeile für verstellbare Komponenten (\Lcomp{mirror} und |
| 2576 |
% \Lcomp{optgrating}). |
| 2577 |
% \fi |
| 2578 |
% \ifENGLISH The style of the arrows of variable components (\Lcomp{mirror} and |
| 2579 |
% \Lcomp{optgrating}). |
| 2580 |
% \fi |
| 2581 |
% \end{stylelist} |
| 2582 |
% |
| 2583 |
% \begin{optionlist} |
| 2584 |
% \valitem{addtoOptComp}{list} |
| 2585 |
% \addtostylemsg{OptComp} |
| 2586 |
% |
| 2587 |
% \valitem{newOptComp}{list} |
| 2588 |
% \newstylemsg{OptComp} |
| 2589 |
% |
| 2590 |
% \iffalse |
| 2591 |
%<*ignore> |
| 2592 |
% \fi |
| 2593 |
\ifGERMAN |
| 2594 |
\begin{LTXexample}[morekeywords={[21]{addtoOptComp,newOptComp}}] |
| 2595 |
\begin{pspicture}(3,1.5) |
| 2596 |
\psset{beam} |
| 2597 |
\newpsstyle{OptComp}{linewidth=3\pslinewidth} |
| 2598 |
\mirror[addtoOptComp={linestyle=dotted}](0.5,0)(0.5,1)(1.5,1) |
| 2599 |
% Ueberschreibt linewidth-Einstellungen |
| 2600 |
\mirror[newOptComp={linestyle=dotted}](1.5,1)(2.5,1)(2.5,0) |
| 2601 |
\end{pspicture} |
| 2602 |
\end{LTXexample} |
| 2603 |
\fi |
| 2604 |
\ifENGLISH |
| 2605 |
\begin{LTXexample}[morekeywords={[21]{addtoOptComp,newOptComp}}] |
| 2606 |
\begin{pspicture}(3,1.5) |
| 2607 |
\psset{beam} |
| 2608 |
\newpsstyle{OptComp}{linewidth=3\pslinewidth} |
| 2609 |
\mirror[addtoOptComp={linestyle=dotted}](0.5,0)(0.5,1)(1.5,1) |
| 2610 |
% overwrites the linewidth settings |
| 2611 |
\mirror[newOptComp={linestyle=dotted}](1.5,1)(2.5,1)(2.5,0) |
| 2612 |
\end{pspicture} |
| 2613 |
\end{LTXexample} |
| 2614 |
\fi |
| 2615 |
% \iffalse |
| 2616 |
%</ignore> |
| 2617 |
% \fi |
| 2618 |
% |
| 2619 |
% \boolitem[false]{optional} |
| 2620 |
% \ifGERMAN |
| 2621 |
% Markiert eine Komponente als optional indem der Stil |
| 2622 |
% \Lstyle{OptionalStyle} angewendet wird. |
| 2623 |
% \fi |
| 2624 |
% \ifENGLISH |
| 2625 |
% Mark an object as optional by applying the \Lstyle{OptionalStyle} style. |
| 2626 |
% \fi |
| 2627 |
% \end{optionlist} |
| 2628 |
% |
| 2629 |
% \ifGERMAN\chapter{Freistrahlkomponenten}\fi |
| 2630 |
% \ifENGLISH\chapter{Free-ray components}\fi |
| 2631 |
% \label{chap:freeraycomp} |
| 2632 |
% |
| 2633 |
% \ifGERMAN In diesem Kapitel werden alle Freistrahlkomponenten und deren |
| 2634 |
% Parameter beschrieben. Freistrahlkomponenten können, im Gegensatz zu |
| 2635 |
% Faserkomponenten, transmittive und reflektive Grenzflächen haben, die für |
| 2636 |
% Raytracing von Lichtstrahlen verwendet werden können. Es gibt zwei |
| 2637 |
% unterschiedliche Komponententypen: manche benötigen nur zwei Knoten um |
| 2638 |
% positioniert zu werden (\compref{lens}--\compref{polarization}), wohingegen |
| 2639 |
% z.B. Spiegel drei Knoten benötigen um korrekt ausgerichtet zu werden |
| 2640 |
% (\compref{mirror}--\compref{pentaprism}). |
| 2641 |
% \fi |
| 2642 |
% \ifENGLISH This chapter describes all free-ray components and their |
| 2643 |
% options. Free-ray components differ from fiber components in that they provide |
| 2644 |
% transmittive or reflective interfaces which can be used to raytrace |
| 2645 |
% beams. They are divided in two types: some components like lenses need only |
| 2646 |
% two nodes for positioning (\compref{lens}--\compref{polarization}), whereas |
| 2647 |
% e.g. mirrors require three nodes to determine the orientation |
| 2648 |
% (\compref{mirror}--\compref{pentaprism}). |
| 2649 |
% \fi |
| 2650 |
% |
| 2651 |
% \ifGERMAN\section{Linse}\fi |
| 2652 |
% \ifENGLISH\section{Lens}\fi |
| 2653 |
% \label{sec:lens} |
| 2654 |
% |
| 2655 |
% \begin{ltxsyntax} |
| 2656 |
% \dipoledesc{lens} |
| 2657 |
% \iffalse |
| 2658 |
%<*ignore> |
| 2659 |
% \fi |
| 2660 |
\begin{LTXexample} |
| 2661 |
\begin{pspicture}(3,1.5) |
| 2662 |
\lens[beam](0,1)(3,1){L} |
| 2663 |
\end{pspicture} |
| 2664 |
\end{LTXexample} |
| 2665 |
% \iffalse |
| 2666 |
%</ignore> |
| 2667 |
% \fi |
| 2668 |
% \end{ltxsyntax} |
| 2669 |
% |
| 2670 |
% \ifENGLISH A lens is defined by its height and the radii of the input and |
| 2671 |
% output interfaces. |
| 2672 |
% \fi |
| 2673 |
% \ifGERMAN Eine Linse wird durch ihre Höhe und die beiden Radien der Eingangs- |
| 2674 |
% und Ausgangsflächen definiert. |
| 2675 |
% \fi |
| 2676 |
% |
| 2677 |
% \begin{optionlist} |
| 2678 |
% \numitem[1]{lensheight} |
| 2679 |
% \ifGERMAN Setzt die Höhe der Linse.\fi |
| 2680 |
% \ifENGLISH Set the height of the lens.\fi |
| 2681 |
% \iffalse |
| 2682 |
%<*ignore> |
| 2683 |
% \fi |
| 2684 |
\begin{LTXexample}[morekeywords={[21]{lensheight}}] |
| 2685 |
\begin{pspicture}(3,1.5) |
| 2686 |
\lens[beam](0,1)(3,1){L1} |
| 2687 |
\lens[lensheight=0.5](2,1)(3,1){L2} |
| 2688 |
\end{pspicture} |
| 2689 |
\end{LTXexample} |
| 2690 |
% \iffalse |
| 2691 |
%</ignore> |
| 2692 |
% \fi |
| 2693 |
% \numitem[1]{lensradiusleft} |
| 2694 |
% \ifGERMAN |
| 2695 |
% Setzt den Radius der linken Linsengrenzfläche. Ein positiver Wert \prm{num} |
| 2696 |
% ist für eine konvexe, ein negativer für eine konkave Krümmung. Null ergibt |
| 2697 |
% eine ebene Fläche. |
| 2698 |
% \fi |
| 2699 |
% \ifENGLISH |
| 2700 |
% Set the left radius of the lens. A positive \prm{num} is for convex, a |
| 2701 |
% negative one for concave curvatures. Use zero for a plain surface. |
| 2702 |
% \fi |
| 2703 |
% |
| 2704 |
% \numitem[1]{lensradiusright} |
| 2705 |
% \ifGERMAN |
| 2706 |
% Das Gleiche wie \Lkeyword{lensradiusleft}, nur für die rechte Grenzfläche. |
| 2707 |
% \fi |
| 2708 |
% \ifENGLISH |
| 2709 |
% Same as \Lkeyword{lensradiusleft} but for the right surface. |
| 2710 |
% \fi |
| 2711 |
% \iffalse |
| 2712 |
%<*ignore> |
| 2713 |
% \fi |
| 2714 |
\begin{LTXexample}[morekeywords={[21]{lensradiusleft, lensradiusright}}] |
| 2715 |
\begin{pspicture}(3,1.5) |
| 2716 |
\psset{lensradiusright=0, beam} |
| 2717 |
\lens[lensradiusleft=1](0,1)(1.5,1){$R > 0$} |
| 2718 |
\lens[lensradiusleft=-1](1.5,1)(3,1){$R < 0$} |
| 2719 |
\end{pspicture} |
| 2720 |
\end{LTXexample} |
| 2721 |
% \iffalse |
| 2722 |
%</ignore> |
| 2723 |
% \fi |
| 2724 |
% |
| 2725 |
% \optitem{lensradius}{\prm{left}[ \prm{right}]} |
| 2726 |
% \ifGERMAN |
| 2727 |
% Setzt die linke und rechte Linsenkrümmung. Wird nur ein Wert angegeben, so |
| 2728 |
% wird dieser für beide Krümmungen verwendet. |
| 2729 |
% \fi |
| 2730 |
% \ifENGLISH |
| 2731 |
% Set the left and right lens curvatures. If only a single value is given, it is |
| 2732 |
% used for both curvatures. |
| 2733 |
% \fi |
| 2734 |
% \iffalse |
| 2735 |
%<*ignore> |
| 2736 |
% \fi |
| 2737 |
\begin{LTXexample}[morekeywords={[21]{lensradius}}] |
| 2738 |
\begin{pspicture}(3,1.5) |
| 2739 |
\lens[lensradius=-2, beam](0,1)(3,1) |
| 2740 |
\end{pspicture} |
| 2741 |
\end{LTXexample} |
| 2742 |
% \iffalse |
| 2743 |
%</ignore> |
| 2744 |
% \fi |
| 2745 |
% |
| 2746 |
% \numitem[0]{lenswidth} |
| 2747 |
% \ifGERMAN |
| 2748 |
% Üblicherweise werden nur die Höhe und die beiden Radien für die |
| 2749 |
% Konstruktion der Linse verwendet, die Mittenbreite wird automatisch |
| 2750 |
% berechnet. Wenn \Lkeyword{lenswidth} auf einen Wert größer Null gesetzt wird, |
| 2751 |
% wird diese Breite verwendet. Das ist nur sinnvoll, wenn dicke Linsen |
| 2752 |
% gezeichnet werden sollen, da es andernfalls für zu kleine Werte zu unschönen |
| 2753 |
% Ergebnissen führt. |
| 2754 |
% \fi |
| 2755 |
% \ifENGLISH |
| 2756 |
% Usually only the height and the two radii are used to construct the lens, |
| 2757 |
% the width is calculated automatically. For \Lkeyword{lenswidth} greater |
| 2758 |
% than zero, this width is used instead. This is only useful if you want to draw |
| 2759 |
% thick lenses and it can give ugly results if the value is choosen too |
| 2760 |
% small. |
| 2761 |
% \fi |
| 2762 |
% \iffalse |
| 2763 |
%<*ignore> |
| 2764 |
% \fi |
| 2765 |
\begin{LTXexample}[morekeywords={[21]{lenswidth}}] |
| 2766 |
\begin{pspicture}(3,2) |
| 2767 |
\lens[lenswidth=0.5, beam](0,1)(2,1){thick lens} |
| 2768 |
\lens[lenswidth=0.1, beam](2,1)(3,1) |
| 2769 |
\end{pspicture} |
| 2770 |
\end{LTXexample} |
| 2771 |
% \iffalse |
| 2772 |
%</ignore> |
| 2773 |
% \fi |
| 2774 |
% \optitem{lens}{\prm{radiusleft}[ \prm{radiusright}[ \prm{height}[ \prm{width}]]]} |
| 2775 |
% \ifGERMAN |
| 2776 |
% Eine Option zum gleichzeitigen Setzen mehrerer Linsenparameter. Werte |
| 2777 |
% mittendrin können mit einem Punkt übersprungen und Werte am Ende können |
| 2778 |
% weggelassen werden (z.B. \opt{lens=. 1 1}). |
| 2779 |
% \fi |
| 2780 |
% \ifENGLISH |
| 2781 |
% A convenience option to specify all lens parameters with a single |
| 2782 |
% option. Intermediate values can be skipped with a dot, values at the end can |
| 2783 |
% be omitted (e.g. \opt{lens=.\ 1 1}). |
| 2784 |
% \fi |
| 2785 |
% \iffalse |
| 2786 |
%<*ignore> |
| 2787 |
% \fi |
| 2788 |
\begin{LTXexample} |
| 2789 |
\begin{pspicture}(3,1.5) |
| 2790 |
\lens[lens=1](0,1)(1,1){L1} |
| 2791 |
\lens[lensradius=-2 1, beam](0,1)(3,1){L2} |
| 2792 |
\lens[lens=2 -0.7 1.2](2,1)(3,1){L3} |
| 2793 |
\end{pspicture} |
| 2794 |
\end{LTXexample} |
| 2795 |
% \iffalse |
| 2796 |
%</ignore> |
| 2797 |
% \fi |
| 2798 |
% |
| 2799 |
% \boolitem[false]{thicklens} |
| 2800 |
% \ifENGLISH |
| 2801 |
% This option was necessary until version 2.1 in order to draw a thick lens of |
| 2802 |
% width \Lkeyword{lenswidth} instead of using the calculated lens width. This |
| 2803 |
% option is superfluous since version 3.0 because setting \Lkeyword{lenswidth} |
| 2804 |
% to a positive value automatically draws a thick lens. |
| 2805 |
% \fi |
| 2806 |
% \ifGERMAN |
| 2807 |
% Diese Option was bis Version 2.1 notwendig um dicke Linsen der Breite |
| 2808 |
% \Lkeyword{lenswidth} zu zeichnen, anstatt die berechnete Breite zu |
| 2809 |
% verwenden. Seit Version 3.0 ist diese Option überflüssig, da dicke Linsen |
| 2810 |
% gezeichnet werden, sobald \Lkeyword{lenswidth} auf einen positiven Wert |
| 2811 |
% gesetzt wird. |
| 2812 |
% \fi |
| 2813 |
% \end{optionlist} |
| 2814 |
% |
| 2815 |
% \ifGERMAN\section{Asphärische Linse}\fi |
| 2816 |
% \ifENGLISH\section{Aspheric lens}\fi |
| 2817 |
% |
| 2818 |
% \begin{ltxsyntax} |
| 2819 |
% \dipoledesc{asphericlens} |
| 2820 |
% \end{ltxsyntax} |
| 2821 |
% |
| 2822 |
% \ifGERMAN Eine asphärische Linse besitzt eine Oberfläche, deren Form durch die Gleichung |
| 2823 |
% \begin{equation*} |
| 2824 |
% z(y) = \frac{y^2}{R(1 + \sqrt{1 - (1+k)y^2/R^2})} + A_4y^4 + A_6y^6 + A_8y^8 + A_{10}y^{10} |
| 2825 |
% \end{equation*} |
| 2826 |
% gegeben ist. $z$ ist der Sagittalschnitt parallel zur optischen Achse, |
| 2827 |
% $y$ der Abstand zur optischen Achse und $R$ der |
| 2828 |
% Krümmungsradius. Desweiteren ist $k$ die konische Konstante und $A_4$, |
| 2829 |
% $A_6$, $A_8$ und $A_{10}$ die Asphärenkoeffizienten der 4. bis |
| 2830 |
% 10. Ordnung. |
| 2831 |
% \fi |
| 2832 |
% \begin{optionlist} |
| 2833 |
% \numitem[1]{asphereheight} |
| 2834 |
% \ifGERMAN Die Höhe der Linse.\fi |
| 2835 |
% \ifENGLISH The lens height.\fi |
| 2836 |
% |
| 2837 |
% \numitem[0]{aspherewidth} |
| 2838 |
% \ifGERMAN |
| 2839 |
% Die Breite der Linse. Wird nur verwendet, wenn der angegebene Wert |
| 2840 |
% über dem minimal berechneten liegt. |
| 2841 |
% \fi |
| 2842 |
% \ifENGLISH |
| 2843 |
% The lens center thickness. Is use only, if the given value is larger |
| 2844 |
% than the minimum calculated value. |
| 2845 |
% \fi |
| 2846 |
% |
| 2847 |
% \numitem[1]{asphereradiusleft} |
| 2848 |
% \ifGERMAN Der Krümmungsradius der linken, asphärischen Oberfläche.\fi |
| 2849 |
% \ifENGLISH Curvature radius of the left, aspheric surface.\fi |
| 2850 |
% |
| 2851 |
% \numitem[0]{asphereradiusright} |
| 2852 |
% \ifGERMAN |
| 2853 |
% Der Krümmungsradius der rechten Oberfläche. Ist dieser gleich Null, |
| 2854 |
% dann ist die Oberfläche plan. |
| 2855 |
% \fi |
| 2856 |
% \ifENGLISH |
| 2857 |
% Curvature radius of the right surface. IF the value is zero, the |
| 2858 |
% surface is plane. |
| 2859 |
% \fi |
| 2860 |
% |
| 2861 |
% \numitem{asphereconstant} |
| 2862 |
% \ifGERMAN Die konische Konstante $k$ der linken Oberfläche.\fi |
| 2863 |
% \ifENGLISH The conic constant $k$ of the left surface.\fi |
| 2864 |
% |
| 2865 |
% \optitem{aspherecoefficients}{\prm{$A_4$} [\prm{$A_6$} [\prm{$A_8$} [\prm{$A_{10}$}]]]} |
| 2866 |
% \ifGERMAN |
| 2867 |
% Die Asphärenkoeffizienten $A_4$ bis $A_{10}$. Es können ein bis vier |
| 2868 |
% Zahlen angegeben werden. |
| 2869 |
% \fi |
| 2870 |
% \ifENGLISH |
| 2871 |
% The aspheric terms of fourth to tenth order. One to four values can be |
| 2872 |
% specified. |
| 2873 |
% \fi |
| 2874 |
% \end{optionlist} |
| 2875 |
% |
| 2876 |
% \ifGERMAN |
| 2877 |
% Als Beispiel nehmen wir die Parameter einer kommerziell erhältlichen |
| 2878 |
% asphärische |
| 2879 |
% Kondensorlinse\fnurl{http://www.thorlabs.de/thorproduct.cfm?partnumber=ACL25416U}: |
| 2880 |
% \fi |
| 2881 |
% \ifENGLISH |
| 2882 |
% As example we use the parameters of a commercially available condensor |
| 2883 |
% lens\fnurl{http://www.thorlabs.de/thorproduct.cfm?partnumber=ACL25416U}: |
| 2884 |
% \fi |
| 2885 |
% \iffalse |
| 2886 |
%<*ignore> |
| 2887 |
% \fi |
| 2888 |
\begin{LTXexample} |
| 2889 |
\begin{pspicture}(0,-0.3)(5,2.3) |
| 2890 |
\pnodes(0,1){A}(5,1){B} |
| 2891 |
\asphericlens[% |
| 2892 |
plotstyle=cspline, |
| 2893 |
asphereheight=2.54, |
| 2894 |
aspherewidth=1.4, |
| 2895 |
asphereradiusleft=0.8818197, |
| 2896 |
aspherecoefficients=8.682e-3 6.376e-3 2.4073e-2 -1.719e-2, |
| 2897 |
asphereconstant=-0.9992, |
| 2898 |
asphereradiusright=6.99995](A)(B) |
| 2899 |
\multido{\r=-1+0.1}{21}{% |
| 2900 |
\drawbeam[beampos=\r, linewidth=0.3\pslinewidth](A){}(B)} |
| 2901 |
\end{pspicture} |
| 2902 |
\end{LTXexample} |
| 2903 |
% \iffalse |
| 2904 |
%</ignore> |
| 2905 |
% \fi |
| 2906 |
% |
| 2907 |
% \ifGERMAN Ein weiteres Beispiel zeigt anschaulich den Unterschied |
| 2908 |
% einer asphärischen Linsen zu einer sphärischen Linse mit gleichem |
| 2909 |
% Krümmungsradius: |
| 2910 |
% \fi |
| 2911 |
% \ifENGLISH |
| 2912 |
% Another example illustrates the difference between an aspheric lens an |
| 2913 |
% a spheric lens with equal curvature: |
| 2914 |
% \fi |
| 2915 |
% \iffalse |
| 2916 |
%<*ignore> |
| 2917 |
% \fi |
| 2918 |
\begin{LTXexample}[pos=t,linerange={2-11}] |
| 2919 |
\psset{unit=0.5cm} |
| 2920 |
\begin{pspicture*}(15,8) |
| 2921 |
\pnodes(0,4){A}(15,4){B} |
| 2922 |
\asphericlens[asphereheight=7.5, asphereradiusleft=3.12848, |
| 2923 |
asphereconstant=-1.991145, aspherecoefficients=4.98e-3](A)(B) |
| 2924 |
\multido{\r=-3.2+0.8}{9}{% |
| 2925 |
\drawbeam[beampos=\r, linewidth=0.5\pslinewidth](A){}(B)} |
| 2926 |
\lens[lens=3.12848 0 6 5.49, abspos=6.13, style=Refline, linestyle=dashed](A)(B) |
| 2927 |
\multido{\r=-2.8+0.8}{8}{% |
| 2928 |
\drawbeam[beampos=\r, linewidth=0.5\pslinewidth, linecolor=red](A){}(B)}% |
| 2929 |
\end{pspicture*} |
| 2930 |
\end{LTXexample} |
| 2931 |
% \iffalse |
| 2932 |
%</ignore> |
| 2933 |
% \fi |
| 2934 |
% |
| 2935 |
% \ifGERMAN\section{Optisches Plättchen}\fi |
| 2936 |
% \ifENGLISH\section{Optical plate}\fi |
| 2937 |
% |
| 2938 |
% |
| 2939 |
% \begin{ltxsyntax} |
| 2940 |
% \dipoledesc{optplate} |
| 2941 |
% \iffalse |
| 2942 |
%<*ignore> |
| 2943 |
% \fi |
| 2944 |
\begin{LTXexample} |
| 2945 |
\begin{pspicture}(3,1.5) |
| 2946 |
\optplate[beam](0,1)(3,1){filter} |
| 2947 |
\end{pspicture} |
| 2948 |
\end{LTXexample} |
| 2949 |
% \iffalse |
| 2950 |
%</ignore> |
| 2951 |
% \fi |
| 2952 |
% \end{ltxsyntax} |
| 2953 |
% \begin{optionlist} |
| 2954 |
% \numitem[1]{plateheight} |
| 2955 |
% \ifGERMAN Die Höhe des Plättchens.\fi |
| 2956 |
% \ifENGLISH The height of the plate.\fi |
| 2957 |
% |
| 2958 |
% \optitem[2\nxLcs{pslinewidth}]{platelinewidth}{\prm{num} or \prm{dimen}} |
| 2959 |
% \ifGERMAN \linewidthexplanation{des Plättchens}{Plättchen}\fi |
| 2960 |
% \ifENGLISH \linewidthexplanation{plate}{plates}\fi |
| 2961 |
% \end{optionlist} |
| 2962 |
% |
| 2963 |
% \ifGERMAN\section{Verzögerungsplättchen}\fi |
| 2964 |
% \ifENGLISH\section{Retardation plate}\fi |
| 2965 |
% |
| 2966 |
% \begin{ltxsyntax} |
| 2967 |
% \dipoledesc{optretplate} |
| 2968 |
% \iffalse |
| 2969 |
%<*ignore> |
| 2970 |
% \fi |
| 2971 |
\begin{LTXexample} |
| 2972 |
\begin{pspicture}(3,1.5) |
| 2973 |
\optretplate[beam](0,1)(3,1){$\nicefrac{\lambda}{2}$} |
| 2974 |
\end{pspicture} |
| 2975 |
\end{LTXexample} |
| 2976 |
% \iffalse |
| 2977 |
%</ignore> |
| 2978 |
% \fi |
| 2979 |
% \end{ltxsyntax} |
| 2980 |
% |
| 2981 |
% \begin{optionlist} |
| 2982 |
% \numitem*[1]{plateheight} |
| 2983 |
% \ifGERMAN Die Höhe des Plättchens.\fi |
| 2984 |
% \ifENGLISH The height of the plate.\fi |
| 2985 |
% |
| 2986 |
% \numitem[0.1]{platewidth} |
| 2987 |
% \ifGERMAN Die Breite des Plättchens.\fi |
| 2988 |
% \ifENGLISH The width of the plate.\fi |
| 2989 |
% |
| 2990 |
% \optitem{platesize}{\prm{width} \prm{height}} |
| 2991 |
% \ifGERMAN Die Breite und Höhe des Plättchens, äquivalent zum Aufruf von |
| 2992 |
% \Lkeyword{platewidth} und \Lkeyword{plateheight}. |
| 2993 |
% \fi |
| 2994 |
% \ifENGLISH The width and height of the plate, is equivalent to calling both |
| 2995 |
% \Lkeyword{platewidth} and \Lkeyword{plateheight}. |
| 2996 |
% \fi |
| 2997 |
% \end{optionlist} |
| 2998 |
% |
| 2999 |
% \ifGERMAN\section{Lochblende}\fi |
| 3000 |
% \ifENGLISH\section{Pinhole}\fi |
| 3001 |
% |
| 3002 |
% \begin{ltxsyntax} |
| 3003 |
% \dipoledesc{pinhole} |
| 3004 |
% \iffalse |
| 3005 |
%<*ignore> |
| 3006 |
% \fi |
| 3007 |
\begin{LTXexample} |
| 3008 |
\begin{pspicture}(3,1.5) |
| 3009 |
\pinhole[beam](0,1)(3,1){PH} |
| 3010 |
\end{pspicture} |
| 3011 |
\end{LTXexample} |
| 3012 |
% \iffalse |
| 3013 |
%</ignore> |
| 3014 |
% \fi |
| 3015 |
% \end{ltxsyntax} |
| 3016 |
% |
| 3017 |
% \begin{optionlist} |
| 3018 |
% \numitem[1]{outerheight} |
| 3019 |
% \ifGERMAN Die Gesamthöhe der Lochblende.\fi |
| 3020 |
% \ifENGLISH The total height of the pinhole.\fi |
| 3021 |
% |
| 3022 |
% \numitem[0.1]{innerheight} |
| 3023 |
% \ifGERMAN Die Höhe des Lochs.\fi |
| 3024 |
% \ifENGLISH The height of the hole.\fi |
| 3025 |
% |
| 3026 |
% \optitem[2\nxLcs{pslinewidth}]{phlinewidth}{\prm{num} or \prm{dimen}} |
| 3027 |
% \ifGERMAN \linewidthexplanation{der Lochblende}{Lochblenden}\fi |
| 3028 |
% \ifENGLISH \linewidthexplanation{pinhole}{pinholes}\fi |
| 3029 |
% |
| 3030 |
% \numitem[0]{phwidth} |
| 3031 |
% \ifGERMAN |
| 3032 |
% Die Lochblende wird plastischer gezeichnet, falls \Lkeyword{phwidth} |
| 3033 |
% ungleich Null ist. In diesem Fall wird \Lkeyword{phlinewidth} ignoriert. Bei |
| 3034 |
% einem negativen Wert wird die Form gespiegelt. |
| 3035 |
% \fi |
| 3036 |
% \ifENGLISH |
| 3037 |
% The pinhole is drawn in a more plastic style if \Lkeyword{phwidth} is |
| 3038 |
% not zero, in this case the \Lkeyword{phlinewidth} is ignored. For negative |
| 3039 |
% values the shape is mirrored. |
| 3040 |
% \fi |
| 3041 |
% \iffalse |
| 3042 |
%<*ignore> |
| 3043 |
% \fi |
| 3044 |
\begin{LTXexample}[morekeywords={[21]{phwidth}}] |
| 3045 |
\begin{pspicture}(3,1.5) |
| 3046 |
\pinhole[beam, phwidth=-0.1](0,1)(1.5,1){neg} |
| 3047 |
\pinhole[beam, phwidth=0.2](1.5,1)(3,1){pos} |
| 3048 |
\end{pspicture} |
| 3049 |
\end{LTXexample} |
| 3050 |
% \iffalse |
| 3051 |
%</ignore> |
| 3052 |
% \fi |
| 3053 |
% \end{optionlist} |
| 3054 |
% |
| 3055 |
% |
| 3056 |
% \ifGERMAN\section{Box}\fi |
| 3057 |
% \ifENGLISH\section{Box}\fi |
| 3058 |
% |
| 3059 |
% \begin{ltxsyntax} |
| 3060 |
% \dipoledesc{optbox} |
| 3061 |
% \iffalse |
| 3062 |
%<*ignore> |
| 3063 |
% \fi |
| 3064 |
\begin{LTXexample} |
| 3065 |
\begin{pspicture}(3,2) |
| 3066 |
\optbox[beam](0,0)(3,2){box} |
| 3067 |
\end{pspicture} |
| 3068 |
\end{LTXexample} |
| 3069 |
% \iffalse |
| 3070 |
%</ignore> |
| 3071 |
% \fi |
| 3072 |
% \end{ltxsyntax} |
| 3073 |
% |
| 3074 |
% \begin{optionlist} |
| 3075 |
% \numitem[1.4]{optboxwidth} |
| 3076 |
% \ifGERMAN Die Breite der Box.\fi |
| 3077 |
% \ifENGLISH The width of the box.\fi |
| 3078 |
% |
| 3079 |
% \numitem[0.8]{optboxheight} |
| 3080 |
% \ifGERMAN Die Höhe der Box.\fi |
| 3081 |
% \ifENGLISH The height of the box.\fi |
| 3082 |
% |
| 3083 |
% \optitem{optboxsize}{\prm{width} \prm{height}} |
| 3084 |
% \ifGERMAN Die Breite und Höhe der Box, äquivalent zum Aufruf von |
| 3085 |
% \Lkeyword{optboxwidth} und \Lkeyword{optboxheight}. |
| 3086 |
% \fi |
| 3087 |
% \ifENGLISH The width and height of the box, is equivalent to calling both |
| 3088 |
% \Lkeyword{optboxwidth} and \Lkeyword{optboxheight}. |
| 3089 |
% \fi |
| 3090 |
% \end{optionlist} |
| 3091 |
% |
| 3092 |
% \ifGERMAN\section{Pfeilkomponente}\fi |
| 3093 |
% \ifENGLISH\section{Arrow component}\fi |
| 3094 |
% |
| 3095 |
% \begin{ltxsyntax} |
| 3096 |
% \dipoledesc{optarrowcomp} |
| 3097 |
% \iffalse |
| 3098 |
%<*ignore> |
| 3099 |
% \fi |
| 3100 |
\begin{LTXexample} |
| 3101 |
\begin{pspicture}(3,1.7) |
| 3102 |
\optarrowcomp[wire](0,1)(3,1){box} |
| 3103 |
\end{pspicture} |
| 3104 |
\end{LTXexample} |
| 3105 |
% \iffalse |
| 3106 |
%</ignore> |
| 3107 |
% \fi |
| 3108 |
% \ifENGLISH A general purpose component, similar to \Lcomp{fiberdelayline}, |
| 3109 |
% but much more flexible. |
| 3110 |
% \fi |
| 3111 |
% \ifGERMAN Eine Komponente für den allgemeinen, flexiblen Gebrauch |
| 3112 |
% ähnlich zu \Lcomp{fiberdelayline}, aber deutlich variabler. |
| 3113 |
% \fi |
| 3114 |
% \end{ltxsyntax} |
| 3115 |
% |
| 3116 |
% \begin{optionlist} |
| 3117 |
% \numitem[1.4]{arrowcompwidth} |
| 3118 |
% \ifGERMAN Die Breite der Box.\fi |
| 3119 |
% \ifENGLISH The width of the box.\fi |
| 3120 |
% |
| 3121 |
% \numitem[0.8]{arrowcompheight} |
| 3122 |
% \ifGERMAN Die Höhe der Komponente.\fi |
| 3123 |
% \ifENGLISH The height of the Komponente.\fi |
| 3124 |
% |
| 3125 |
% \optitem{arrowcompsize}{\prm{size} or \prm{width} \prm{height}} |
| 3126 |
% \ifGERMAN Die Breite und Höhe der Komponente, äquivalent zum Aufruf von |
| 3127 |
% \Lkeyword{arrowcompwidth} und \Lkeyword{arrowcompheight}. |
| 3128 |
% \fi |
| 3129 |
% \ifENGLISH The width and height of the component, is equivalent to calling both |
| 3130 |
% \Lkeyword{arrowcompwidth} and \Lkeyword{arrowcompheight}. |
| 3131 |
% \fi |
| 3132 |
% |
| 3133 |
% \numitem[70]{arrowcompangle} |
| 3134 |
% \ifGERMAN Der Winkel des Pfeils bezüglich der $x$-Achse.\fi |
| 3135 |
% \ifENGLISH The angle of the arrow with respect to the $x$-axis.\fi |
| 3136 |
% |
| 3137 |
% \choitem[rectangle]{arrowcompshape}{rectangle, circle} |
| 3138 |
% \iffalse |
| 3139 |
%<*ignore> |
| 3140 |
% \fi |
| 3141 |
\begin{LTXexample}[morekeywords={[21]arrowcompshape}] |
| 3142 |
\begin{pspicture}(3,1) |
| 3143 |
\optarrowcomp[arrowcompshape=circle, wire](0,0.5)(3,0.5) |
| 3144 |
\end{pspicture} |
| 3145 |
\end{LTXexample} |
| 3146 |
% \iffalse |
| 3147 |
%</ignore> |
| 3148 |
% \fi |
| 3149 |
% \end{optionlist} |
| 3150 |
% \begin{stylelist} |
| 3151 |
% \styleitem[arrowinset=0, arrows=->]{ArrowCompStyle} |
| 3152 |
% \ifGERMAN |
| 3153 |
% Der Stil für den Pfeil. Das kann insbesonders nützlich sein um die |
| 3154 |
% Länge und Ausrichtung des Pfeils zu verändern. |
| 3155 |
% \fi |
| 3156 |
% \ifENGLISH |
| 3157 |
% The style of the arrow. This can be especially useful to |
| 3158 |
% adapt the length and orientation of the arrow. |
| 3159 |
% \fi |
| 3160 |
% \iffalse |
| 3161 |
%<*ignore> |
| 3162 |
% \fi |
| 3163 |
\begin{LTXexample}[morekeywords={[21]ArrowCompStyle}] |
| 3164 |
\begin{pspicture}(3,1.5) |
| 3165 |
\addtopsstyle{ArrowCompStyle}{xunit=-1, arrowscale=2} |
| 3166 |
\optarrowcomp[fiber](0,1)(3,1){delay line} |
| 3167 |
\end{pspicture} |
| 3168 |
\end{LTXexample} |
| 3169 |
% \iffalse |
| 3170 |
%</ignore> |
| 3171 |
% \fi |
| 3172 |
% \end{stylelist} |
| 3173 |
% |
| 3174 |
% \ifGERMAN\section{Balkenkomponente}\fi |
| 3175 |
% \ifENGLISH\section{Bar component}\fi |
| 3176 |
% |
| 3177 |
% \begin{ltxsyntax} |
| 3178 |
% \dipoledesc{optbarcomp} |
| 3179 |
% \iffalse |
| 3180 |
%<*ignore> |
| 3181 |
% \fi |
| 3182 |
\begin{LTXexample} |
| 3183 |
\begin{pspicture}(3,1.5) |
| 3184 |
\optbarcomp[fiber](0,1)(3,1){box} |
| 3185 |
\end{pspicture} |
| 3186 |
\end{LTXexample} |
| 3187 |
% \iffalse |
| 3188 |
%</ignore> |
| 3189 |
% \fi |
| 3190 |
% \ifENGLISH A general purpose component, similar to \Lcomp{optfiberpolarizer}, |
| 3191 |
% but much more flexible. |
| 3192 |
% \fi |
| 3193 |
% \ifGERMAN Eine Komponente für den allgemeinen, flexiblen Gebrauch |
| 3194 |
% ähnlich zu \Lcomp{optfiberpolarizer}, aber deutlich variabler. |
| 3195 |
% \fi |
| 3196 |
% \end{ltxsyntax} |
| 3197 |
% |
| 3198 |
% \begin{optionlist} |
| 3199 |
% \numitem[1.4]{barcompwidth} |
| 3200 |
% \ifGERMAN Die Breite der Box.\fi |
| 3201 |
% \ifENGLISH The width of the box.\fi |
| 3202 |
% |
| 3203 |
% \numitem[0.8]{barcompheight} |
| 3204 |
% \ifGERMAN Die Höhe der Box.\fi |
| 3205 |
% \ifENGLISH The height of the box.\fi |
| 3206 |
% |
| 3207 |
% \optitem{barcompsize}{\prm{size} or \prm{width} \prm{height}} |
| 3208 |
% \ifGERMAN Die Breite und Höhe der Box, äquivalent zum Aufruf von |
| 3209 |
% \Lkeyword{barcompwidth} und \Lkeyword{barcompheight}. |
| 3210 |
% \fi |
| 3211 |
% \ifENGLISH The width and height of the box, is equivalent to calling both |
| 3212 |
% \Lkeyword{barcompwidth} and \Lkeyword{barcompheight}. |
| 3213 |
% \fi |
| 3214 |
% |
| 3215 |
% \numitem[70]{barcompangle} |
| 3216 |
% \ifGERMAN Der Winkel des Balkens bezüglich der $x$-Achse.\fi |
| 3217 |
% \ifENGLISH The angle of the bar with respect to the $x$-axis.\fi |
| 3218 |
% \iffalse |
| 3219 |
%<*ignore> |
| 3220 |
% \fi |
| 3221 |
\begin{LTXexample}[morekeywords={[21]barcompangle}] |
| 3222 |
\begin{pspicture}(3,1) |
| 3223 |
\optbarcomp[barcompangle=90, fiber](0,0.5)(3,0.5) |
| 3224 |
\end{pspicture} |
| 3225 |
\end{LTXexample} |
| 3226 |
% \iffalse |
| 3227 |
%</ignore> |
| 3228 |
% \fi |
| 3229 |
% |
| 3230 |
% \choitem[rectangle]{barcompshape}{rectangle, circle} |
| 3231 |
% \iffalse |
| 3232 |
%<*ignore> |
| 3233 |
% \fi |
| 3234 |
\begin{LTXexample}[morekeywords={[21]barcompshape}] |
| 3235 |
\begin{pspicture}(3,1) |
| 3236 |
\optbarcomp[barcompshape=circle, fiber](0,0.5)(3,0.5) |
| 3237 |
\end{pspicture} |
| 3238 |
\end{LTXexample} |
| 3239 |
% \iffalse |
| 3240 |
%</ignore> |
| 3241 |
% \fi |
| 3242 |
% \end{optionlist} |
| 3243 |
% \begin{stylelist} |
| 3244 |
% \styleitem{BarCompStyle} |
| 3245 |
% \ifENGLISH The style of the bar.\fi |
| 3246 |
% \ifGERMAN Der Stil für den Balken.\fi |
| 3247 |
% \iffalse |
| 3248 |
%<*ignore> |
| 3249 |
% \fi |
| 3250 |
\begin{LTXexample}[morekeywords={[21]BarCompStyle}] |
| 3251 |
\begin{pspicture}(3,1) |
| 3252 |
\newpsstyle{BarCompStyle}{unit=0.7, arrows=->} |
| 3253 |
\optbarcomp[barcompshape=circle, barcompangle=45, fiber](0,0.5)(3,0.5) |
| 3254 |
\end{pspicture} |
| 3255 |
\end{LTXexample} |
| 3256 |
% \iffalse |
| 3257 |
%</ignore> |
| 3258 |
% \fi |
| 3259 |
% \end{stylelist} |
| 3260 |
% |
| 3261 |
% \ifGERMAN\section{Optische Quelle}\fi |
| 3262 |
% \ifENGLISH\section{Optical source}\fi |
| 3263 |
% |
| 3264 |
% \begin{ltxsyntax} |
| 3265 |
% \dipoledesc{optsource} |
| 3266 |
% \iffalse |
| 3267 |
%<*ignore> |
| 3268 |
% \fi |
| 3269 |
\begin{LTXexample} |
| 3270 |
\begin{pspicture}(3,2) |
| 3271 |
\optsource(1.5,1)(3,1){Laser} |
| 3272 |
\end{pspicture} |
| 3273 |
\end{LTXexample} |
| 3274 |
% \iffalse |
| 3275 |
%</ignore> |
| 3276 |
% \fi |
| 3277 |
% |
| 3278 |
% \ifENGLISH |
| 3279 |
% An optical source predefines some properties of any outgoing beam, if |
| 3280 |
% it is the first component in a beam path. The definable beam |
| 3281 |
% properties are \Lkeyword{beamangle}, \Lkeyword{beamwidth}, |
| 3282 |
% \Lkeyword{beamdiv} and \Lkeyword{beamalign}. The properties defined by |
| 3283 |
% the optical source cannot be overwritten by the beam properties. If a |
| 3284 |
% property wasn't explicitely defined for a source, it is taken from the |
| 3285 |
% beam properties. |
| 3286 |
% |
| 3287 |
% The default settings for the component position are |
| 3288 |
% \Lkeyword{position}\opt{=start}. |
| 3289 |
% \fi |
| 3290 |
% \ifGERMAN |
| 3291 |
% Eine optische Quelle gibt ein paar Eigenschaften für alle von ihr |
| 3292 |
% ausgehenden Strahlen vor, falls es die erste Komponente in einem |
| 3293 |
% Strahlengang ist. Die verwendbaren Eigenschaften sind |
| 3294 |
% \Lkeyword{beamangle}, \Lkeyword{beamwidth}, \Lkeyword{beamdiv} und |
| 3295 |
% \Lkeyword{beamalign}. Alle Eigenschaften, die von einer optischen |
| 3296 |
% Quelle definiert werden, können nicht später durch Strahlparameter |
| 3297 |
% überschrieben werden. Wird ein Parameter nicht explizit von der Quelle |
| 3298 |
% definiert, so werden die Parameter von dem Strahl-Stil verwendet. |
| 3299 |
% |
| 3300 |
% Die Voreinstellung für die Positionierung ist |
| 3301 |
% \Lkeyword{position}\opt{=start}. |
| 3302 |
% \fi |
| 3303 |
% \end{ltxsyntax} |
| 3304 |
% |
| 3305 |
% \iffalse |
| 3306 |
%<*ignore> |
| 3307 |
% \fi |
| 3308 |
\begin{LTXexample} |
| 3309 |
\begin{pspicture}(5,2) |
| 3310 |
\pnodes(1.5,1){A}(5,1){B} |
| 3311 |
\optsource[innerlabel, beamdiv=10, beamangle=10](A)(B){Laser} |
| 3312 |
\lens[lens=2 2 2](A)(B) |
| 3313 |
\optplane(B) |
| 3314 |
\drawwidebeam{-} |
| 3315 |
\drawbeam[linecolor=red]{-} |
| 3316 |
\end{pspicture} |
| 3317 |
\end{LTXexample} |
| 3318 |
% \iffalse |
| 3319 |
%</ignore> |
| 3320 |
% \fi |
| 3321 |
% |
| 3322 |
% \begin{optionlist} |
| 3323 |
% \numitem[1.4]{sourcewidth} |
| 3324 |
% \ifGERMAN Die Breite der Box.\fi |
| 3325 |
% \ifENGLISH The width of the box.\fi |
| 3326 |
% |
| 3327 |
% \numitem[0.8]{sourceheight} |
| 3328 |
% \ifGERMAN Die Höhe der Box.\fi |
| 3329 |
% \ifENGLISH The height of the box.\fi |
| 3330 |
% |
| 3331 |
% \optitem{sourcesize}{\prm{width} \prm{height}} |
| 3332 |
% \ifGERMAN Die Breite und Höhe der Box, äquivalent zum Aufruf von |
| 3333 |
% \Lkeyword{sourcewidth} und \Lkeyword{sourceheight}. |
| 3334 |
% \fi |
| 3335 |
% \ifENGLISH The width and height of the box, is equivalent to calling both |
| 3336 |
% \Lkeyword{sourcewidth} and \Lkeyword{sourceheight}. |
| 3337 |
% \fi |
| 3338 |
% \end{optionlist} |
| 3339 |
% |
| 3340 |
% \ifGERMAN\section{Kristall}\fi |
| 3341 |
% \ifENGLISH\section{Crystal}\fi |
| 3342 |
% |
| 3343 |
% \begin{ltxsyntax} |
| 3344 |
% \dipoledesc{crystal} |
| 3345 |
% \iffalse |
| 3346 |
%<*ignore> |
| 3347 |
% \fi |
| 3348 |
\begin{LTXexample} |
| 3349 |
\begin{pspicture}(3,1.3) |
| 3350 |
\crystal[beam](0,1)(3,1){Crystal} |
| 3351 |
\end{pspicture} |
| 3352 |
\end{LTXexample} |
| 3353 |
% \iffalse |
| 3354 |
%</ignore> |
| 3355 |
% \fi |
| 3356 |
% \end{ltxsyntax} |
| 3357 |
% |
| 3358 |
% \begin{optionlist} |
| 3359 |
% \numitem[1.4]{crystalwidth} |
| 3360 |
% \ifGERMAN Die Breite des Kristalls.\fi |
| 3361 |
% \ifENGLISH The width of the crystal.\fi |
| 3362 |
% |
| 3363 |
% \numitem[0.6]{crystalheight} |
| 3364 |
% \ifGERMAN Die Höhe des Kristalls.\fi |
| 3365 |
% \ifENGLISH The height of the crystal.\fi |
| 3366 |
% |
| 3367 |
% \optitem{crystalsize}{\prm{width} \prm{height}} |
| 3368 |
% \ifGERMAN Die Breite und Höhe des Kristalls, äquivalent zum Aufruf von |
| 3369 |
% \Lkeyword{crystalwidth} und \Lkeyword{crystalheight}. |
| 3370 |
% \fi |
| 3371 |
% \ifENGLISH The width and height of the crystal, is equivalent to calling both |
| 3372 |
% \Lkeyword{crystalwidth} and \Lkeyword{crystalheight}. |
| 3373 |
% \fi |
| 3374 |
% |
| 3375 |
% \numitem[0.3]{caxislength} |
| 3376 |
% \ifGERMAN Die zusätzliche Länge des Pfeils für die $c$-Achse, wird weggelassen |
| 3377 |
% falls die Länge \opt{0} ist und gespiegelt falls der Wert negativ ist. Die |
| 3378 |
% Gesamtlänge ist \Lkeyword{caxislength} plus \Lkeyword{crystalheight}. |
| 3379 |
% \fi |
| 3380 |
% \ifENGLISH The additional length of the $c$-axis, is dropped when set to |
| 3381 |
% \opt{0} and is mirrored if the values is negative. The total length is |
| 3382 |
% \Lkeyword{caxislength} plus \Lkeyword{crystalheight}. |
| 3383 |
% \fi |
| 3384 |
% \iffalse |
| 3385 |
%<*ignore> |
| 3386 |
% \fi |
| 3387 |
\begin{LTXexample}[morekeywords={[21]{caxislength}}] |
| 3388 |
\begin{pspicture}(0,0.4)(3,1.5) |
| 3389 |
\psset{crystalsize=0.5 0.8, label=-45 . l} |
| 3390 |
\crystal[position=0.2, caxislength=0.5](0,1)(3,1){pos} |
| 3391 |
\crystal[beam, caxislength=0](0,1)(3,1){0} |
| 3392 |
\crystal[position=0.8, caxislength=-0.5](0,1)(3,1){neg} |
| 3393 |
\end{pspicture} |
| 3394 |
\end{LTXexample} |
| 3395 |
% \iffalse |
| 3396 |
%</ignore> |
| 3397 |
% \fi |
| 3398 |
% |
| 3399 |
% \boolitem[false]{caxisinv} |
| 3400 |
% \ifGERMAN |
| 3401 |
% Invertiert die Richtung der $c$-Achse, ist äquivalent zu einem |
| 3402 |
% Vorzeichenwechsel von \Lkeyword{caxislength}. |
| 3403 |
% \fi |
| 3404 |
% \ifENGLISH |
| 3405 |
% Invert the direction of the $c$-axis, this is equivalent to changing the sign |
| 3406 |
% of \Lkeyword{caxislength}. |
| 3407 |
% \fi |
| 3408 |
% |
| 3409 |
% \boolitem[false]{voltage} |
| 3410 |
% \ifGERMAN Zeichnet einen Spannungsanschluss und ein Erdungszeichen.\fi |
| 3411 |
% \ifENGLISH Draw a voltage connection and a ground symbol.\fi |
| 3412 |
% \iffalse |
| 3413 |
%<*ignore> |
| 3414 |
% \fi |
| 3415 |
\begin{LTXexample}[morekeywords={[21]{voltage}}] |
| 3416 |
\begin{pspicture}(0,0.4)(3,1.5) |
| 3417 |
\crystal[voltage, beam](0,1)(3,1) |
| 3418 |
\end{pspicture} |
| 3419 |
\end{LTXexample} |
| 3420 |
% \iffalse |
| 3421 |
%</ignore> |
| 3422 |
% \fi |
| 3423 |
% |
| 3424 |
% \boolitem[false]{lamp} |
| 3425 |
% \ifGERMAN Zeichnet eine Lampe neben den Kristall.\fi |
| 3426 |
% \ifENGLISH Draw a lamp near the crystal.\fi |
| 3427 |
% \iffalse |
| 3428 |
%<*ignore> |
| 3429 |
% \fi |
| 3430 |
\begin{LTXexample}[morekeywords={[21]{lamp}}] |
| 3431 |
\begin{pspicture}(0,0.4)(3,1.7) |
| 3432 |
\crystal[lamp, beam](0,1)(3,1) |
| 3433 |
\end{pspicture} |
| 3434 |
\end{LTXexample} |
| 3435 |
% \iffalse |
| 3436 |
%</ignore> |
| 3437 |
% \fi |
| 3438 |
% \end{optionlist} |
| 3439 |
% |
| 3440 |
% \begin{stylelist} |
| 3441 |
% \styleitem[linewidth=0.7\cs{pslinewidth}, linestyle=dashed, dash=2pt 2pt, arrowinset=0, arrows=->]{CrystalCaxis} |
| 3442 |
% \ifGERMAN Der Stil für die $c$-Achse inklusive der Pfeilart.\fi |
| 3443 |
% \ifENGLISH The style of the $c$-axis including the arrow type.\fi |
| 3444 |
% \iffalse |
| 3445 |
%<*ignore> |
| 3446 |
% \fi |
| 3447 |
\begin{LTXexample}[morekeywords={[21]{CrysalCaxis}}] |
| 3448 |
\begin{pspicture}(0,0.5)(3,1.6) |
| 3449 |
\newpsstyle{CrystalCaxis}{linecolor=red, arrows=->>} |
| 3450 |
\crystal[beam](0,1)(3,1) |
| 3451 |
\end{pspicture} |
| 3452 |
\end{LTXexample} |
| 3453 |
% \iffalse |
| 3454 |
%</ignore> |
| 3455 |
% \fi |
| 3456 |
% |
| 3457 |
% \styleitem[linewidth=0.6\cs{pslinewidth}]{CrystalLamp} |
| 3458 |
% \ifGERMAN Der Stil für die Hintergrundlampe.\fi |
| 3459 |
% \ifENGLISH The style of the crystal background lamp.\fi |
| 3460 |
% \end{stylelist} |
| 3461 |
% |
| 3462 |
% \iffalse |
| 3463 |
%<*ignore> |
| 3464 |
% \fi |
| 3465 |
\begin{LTXexample}[morekeywords={[21]{voltage, lamp}}] |
| 3466 |
\begin{pspicture}(3,1.7) |
| 3467 |
\crystal[fillstyle=solid, fillcolor=yellow!90!black, |
| 3468 |
label=1.2 -45, voltage, |
| 3469 |
lamp, beam](0,1)(3,1){SBN:Ce} |
| 3470 |
\end{pspicture} |
| 3471 |
\end{LTXexample} |
| 3472 |
% \iffalse |
| 3473 |
%</ignore> |
| 3474 |
% \fi |
| 3475 |
% |
| 3476 |
% \ifGERMAN\section{Optische Diode}\fi |
| 3477 |
% \ifENGLISH\section{Optical diode}\fi |
| 3478 |
% |
| 3479 |
% \begin{ltxsyntax} |
| 3480 |
% \dipoledesc{optdiode} |
| 3481 |
% \iffalse |
| 3482 |
%<*ignore> |
| 3483 |
% \fi |
| 3484 |
\begin{LTXexample}[morekeywords={[21]{optdiode}}] |
| 3485 |
\begin{pspicture}(3,2) |
| 3486 |
\optdiode[beam](0,1)(3,1){Diode} |
| 3487 |
\end{pspicture} |
| 3488 |
\end{LTXexample} |
| 3489 |
% \iffalse |
| 3490 |
%</ignore> |
| 3491 |
% \fi |
| 3492 |
% \end{ltxsyntax} |
| 3493 |
% |
| 3494 |
% \ifENGLISH The optical diode has a default setting of |
| 3495 |
% \Lkeyword{allowbeaminside}\opt{=false}. |
| 3496 |
% \fi |
| 3497 |
% \ifGERMAN Die optische Diode hat die Voreinstellung |
| 3498 |
% \Lkeyword{allowbeaminside}\opt{=false}. |
| 3499 |
% \fi |
| 3500 |
% |
| 3501 |
% \begin{optionlist} |
| 3502 |
% \numitem[0.8]{optdiodesize} |
| 3503 |
% \ifGERMAN |
| 3504 |
% Die Seitenlänge der optischen Diode. |
| 3505 |
% \fi |
| 3506 |
% \ifENGLISH |
| 3507 |
% The side length of the optical diode. |
| 3508 |
% \fi |
| 3509 |
% \end{optionlist} |
| 3510 |
% |
| 3511 |
% \ifGERMAN\section{Doveprisma}\fi |
| 3512 |
% \ifENGLISH\section{Dove prism}\fi |
| 3513 |
% |
| 3514 |
% \begin{ltxsyntax} |
| 3515 |
% \dipoledesc{doveprism} |
| 3516 |
% \iffalse |
| 3517 |
%<*ignore> |
| 3518 |
% \fi |
| 3519 |
\begin{LTXexample}[morekeywords={[21]{doveprism}}] |
| 3520 |
\begin{pspicture}(3,1.5) |
| 3521 |
\doveprism[beam](0,1)(3,1){Dove} |
| 3522 |
\end{pspicture} |
| 3523 |
\end{LTXexample} |
| 3524 |
% \iffalse |
| 3525 |
%</ignore> |
| 3526 |
% \fi |
| 3527 |
% \end{ltxsyntax} |
| 3528 |
% |
| 3529 |
% \begin{optionlist} |
| 3530 |
% \optitem[0.6]{doveprismsize}{\prm{num} or \prm{width} \prm{height}} |
| 3531 |
% \ifGERMAN |
| 3532 |
% Wenn eine Zahl angegeben ist, dann ist das die Höhe des Prismas, die |
| 3533 |
% Gesamtbreite beträgt das dreifache. Zwei Zahlen geben Breite und Höhe des |
| 3534 |
% Doveprisma an. Die Winkel an der Eingangs- und Ausgangsfläche betragen immer |
| 3535 |
% 45\textdegree. |
| 3536 |
% \fi |
| 3537 |
% \ifENGLISH |
| 3538 |
% A single number defines the height of the prism, the total width is set to |
| 3539 |
% three times the height. Two number define the width and height of the dove |
| 3540 |
% prism. The angles at the input and output faces are always 45\textdegree. |
| 3541 |
% \fi |
| 3542 |
% \end{optionlist} |
| 3543 |
% |
| 3544 |
% \iffalse |
| 3545 |
%<*ignore> |
| 3546 |
% \fi |
| 3547 |
\begin{LTXexample}[morekeywords={[21]{doveprism}}] |
| 3548 |
\begin{pspicture}(4,1.5) |
| 3549 |
\optplane(0,1) |
| 3550 |
\doveprism[doveprismsize=1.2](0,1)(4,1) |
| 3551 |
\optplane(4,1) |
| 3552 |
\drawbeam[raytrace=false, linecolor=black]{-} |
| 3553 |
\drawbeam[n=1.5, linecolor=red]{-} |
| 3554 |
\drawbeam[n=*sqrt(5), linecolor=green, linestyle=dashed]{-} |
| 3555 |
\end{pspicture} |
| 3556 |
\end{LTXexample} |
| 3557 |
% \iffalse |
| 3558 |
%</ignore> |
| 3559 |
% \fi |
| 3560 |
% |
| 3561 |
% \ifGERMAN\section{Glan-Thompson-Prisma}\fi |
| 3562 |
% \ifENGLISH\section{Glan--Thompson prism}\fi |
| 3563 |
% |
| 3564 |
% \begin{ltxsyntax} |
| 3565 |
% \dipoledesc{glanthompson} |
| 3566 |
% \iffalse |
| 3567 |
%<*ignore> |
| 3568 |
% \fi |
| 3569 |
\begin{LTXexample}[morekeywords={[21]{glanthompson}}] |
| 3570 |
\begin{pspicture}(3,1.5) |
| 3571 |
\glanthompson[beam](0,1)(3,1){Glan-Thompson} |
| 3572 |
\end{pspicture} |
| 3573 |
\end{LTXexample} |
| 3574 |
% \iffalse |
| 3575 |
%</ignore> |
| 3576 |
% \fi |
| 3577 |
% \end{ltxsyntax} |
| 3578 |
% |
| 3579 |
% \begin{optionlist} |
| 3580 |
% \numitem[1.0]{glanthompsonwidth} |
| 3581 |
% \ifGERMAN Die Breite des Prisma.\fi |
| 3582 |
% \ifENGLISH The width of the prism.\fi |
| 3583 |
% |
| 3584 |
% \numitem[0.5]{glanthompsonheight} |
| 3585 |
% \ifGERMAN Die Höhe des Prisma.\fi |
| 3586 |
% \ifENGLISH The height of the prism.\fi |
| 3587 |
% |
| 3588 |
% \optitem{glanthompsonsize}{\prm{width} \prm{height}} |
| 3589 |
% \ifGERMAN Die Breite und Höhe des Prisma, äquivalent zum Aufruf von |
| 3590 |
% \Lkeyword{glanthompsonwidth} und \Lkeyword{glanthompsonheight}. |
| 3591 |
% \fi |
| 3592 |
% \ifENGLISH The width and height of the prism, is equivalent to calling both |
| 3593 |
% \Lkeyword{glanthompsonwidth} and \Lkeyword{glanthompsonheight}. |
| 3594 |
% \fi |
| 3595 |
% |
| 3596 |
% \numitem[0]{glanthompsongap} |
| 3597 |
% \ifGERMAN |
| 3598 |
% Der Abstand der beiden Teilprismen in $x$-Richtung, die Linienbreiten |
| 3599 |
% werden nicht berücksichtigt. Die Gesamtbreite ist von diesem Wert |
| 3600 |
% unabhängig, aber der Winkel der reflektierenden Fläche wird davon beeinflusst. |
| 3601 |
% \fi |
| 3602 |
% \ifENGLISH The separation of the two prisms in $x$-direction. The |
| 3603 |
% total width does not depend on this value, but the angle of the |
| 3604 |
% reflective plane is affected. |
| 3605 |
% \fi |
| 3606 |
% |
| 3607 |
% \iffalse |
| 3608 |
%<*ignore> |
| 3609 |
% \fi |
| 3610 |
\begin{LTXexample} |
| 3611 |
\begin{pspicture}(3,1) |
| 3612 |
\glanthompson[glanthompsongap=0.1, beam](0,0.5)(3,0.5) |
| 3613 |
\end{pspicture} |
| 3614 |
\end{LTXexample} |
| 3615 |
% \iffalse |
| 3616 |
%</ignore> |
| 3617 |
% \fi |
| 3618 |
% \end{optionlist} |
| 3619 |
% |
| 3620 |
% \ifGERMAN Von der Implementierung entspricht das Glan-Thompson-Prisma |
| 3621 |
% für \Lkeyword{glanthompsongap}\opt{=0} einem Strahlteiler, der nur |
| 3622 |
% zwei Knoten zur Positionierung benötigt und nicht quadratisch ist. |
| 3623 |
% |
| 3624 |
% Beachten Sie, dass das Prisma für \Lkeyword{glanthompsongap}\opt{>\,0} |
| 3625 |
% nicht von beiden Seiten gleich verwendet werden kann, da in der |
| 3626 |
% derzeitigen Implementierung nur eine uneindeutige Grenzfläche |
| 3627 |
% (reflektierend oder transmittierend) zugelassen ist. In dem folgenden |
| 3628 |
% Beispiel sieht man, dass der rote Strahl an der falsche Fläche |
| 3629 |
% reflektiert wird. |
| 3630 |
% \fi |
| 3631 |
% \ifENGLISH |
| 3632 |
% The implementation of the Glan--Thompson prism for |
| 3633 |
% \Lkeyword{glanthompsongap}\opt{=0} is equivalent to a beamsplitter |
| 3634 |
% which is positioned with two nodes only and which is not quadratic. |
| 3635 |
% |
| 3636 |
% Please note, that the Prism cannot be used properly from both sides |
| 3637 |
% for \Lkeyword{glanthompsongap}\opt{>\,0} because the current |
| 3638 |
% implementation allows only a single ambiguous interface (reflective or |
| 3639 |
% transmittive). In the following example you see, that the red beam is |
| 3640 |
% reflected at the wrong interface. |
| 3641 |
% \fi |
| 3642 |
% |
| 3643 |
% \iffalse |
| 3644 |
%<*ignore> |
| 3645 |
% \fi |
| 3646 |
\begin{LTXexample} |
| 3647 |
\begin{pspicture}(4,2) |
| 3648 |
\pnodes(0,1){A}(4,1){B} |
| 3649 |
\glanthompson[glanthompsongap=0.2, glanthompsonsize=2 1](A)(B) |
| 3650 |
\optplane[angle=90](2,0)\optplane[angle=90](2,2) |
| 3651 |
\addtopsstyle{Beam}{ArrowInside=->, arrowscale=1.5} |
| 3652 |
\drawbeam[beampos=0.1](A){1-2} |
| 3653 |
\drawbeam[beampos=0.1, linecolor=red](B){1}{3} |
| 3654 |
\end{pspicture} |
| 3655 |
\end{LTXexample} |
| 3656 |
% \iffalse |
| 3657 |
%</ignore> |
| 3658 |
% \fi |
| 3659 |
% |
| 3660 |
% \ifGERMAN \prettyref{ex:glan-thompson} enthält ein weiterführendes |
| 3661 |
% Beispiel mit einem Glan-Thompson-Prisma.\fi |
| 3662 |
% \ifENGLISH \prettyref{ex:glan-thompson} shows a further setup with a |
| 3663 |
% Glan--Thompson prism.\fi |
| 3664 |
% |
| 3665 |
% \ifGERMAN\section{Polarisation}\fi |
| 3666 |
% \ifENGLISH\section{Polarization}\fi |
| 3667 |
% |
| 3668 |
% \begin{ltxsyntax} |
| 3669 |
% \dipoledesc{polarization} |
| 3670 |
% \iffalse |
| 3671 |
%<*ignore> |
| 3672 |
% \fi |
| 3673 |
\begin{LTXexample}[morekeywords={[21]{polarization}}] |
| 3674 |
\begin{pspicture}(3,1) |
| 3675 |
\polarization[beam](0,0.5)(3,0.5) |
| 3676 |
\end{pspicture} |
| 3677 |
\end{LTXexample} |
| 3678 |
% \iffalse |
| 3679 |
%</ignore> |
| 3680 |
% \fi |
| 3681 |
% \end{ltxsyntax} |
| 3682 |
% \begin{optionlist} |
| 3683 |
% \numitem[0.6]{polsize} |
| 3684 |
% \ifGERMAN Die Größe des Polarisationszeichens, der Kreis für \opt{perp} und |
| 3685 |
% \opt{polmisc} ist halb so groß. |
| 3686 |
% \fi |
| 3687 |
% \ifENGLISH The size of the polarization symbol, the circle for \opt{perp} and |
| 3688 |
% \opt{polmisc} is half of this. |
| 3689 |
% \fi |
| 3690 |
% |
| 3691 |
% \choitem[parallel]{poltype}{parallel, perp, misc, lcirc, rcirc} |
| 3692 |
% \ifGERMAN Dieser Parameter wählt die Polarizationsart aus.\fi |
| 3693 |
% \ifENGLISH This parameter choses the polarization type.\fi |
| 3694 |
% \iffalse |
| 3695 |
%<*ignore> |
| 3696 |
% \fi |
| 3697 |
\begin{LTXexample}[morekeywords={[21]{poltype}}] |
| 3698 |
\begin{pspicture}(0,-0.3)(3,4.3) |
| 3699 |
\psset[optexp]{beam} |
| 3700 |
\begin{optexp} |
| 3701 |
\polarization[poltype=parallel, abspos=0.5](0,4)(3,4) |
| 3702 |
\polarization[poltype=perp, abspos=1](0,3)(3,3) |
| 3703 |
\polarization[poltype=misc, abspos=1.5](0,2)(3,2) |
| 3704 |
\polarization[poltype=lcirc, abspos=2](0,1)(3,1) |
| 3705 |
\polarization[poltype=rcirc, abspos=2.5](0,0)(3,0) |
| 3706 |
\end{optexp} |
| 3707 |
\end{pspicture} |
| 3708 |
\end{LTXexample} |
| 3709 |
% \iffalse |
| 3710 |
%</ignore> |
| 3711 |
% \fi |
| 3712 |
% \end{optionlist} |
| 3713 |
% |
| 3714 |
% \begin{stylelist} |
| 3715 |
% \styleitem[arrowscale=0.8, linewidth=0.7\cs{pslinewidth}, dotsize=3\cs{pslinewidth}]{Polarization} |
| 3716 |
% \ifGERMAN Bestimmt das Aussehen der Polarisationssymbole.\fi |
| 3717 |
% \ifENGLISH Affects the style of the polarisation symbols.\fi |
| 3718 |
% \end{stylelist} |
| 3719 |
% |
| 3720 |
% \ifGERMAN\section{Keil}\fi |
| 3721 |
% \ifENGLISH\section{Wedge}\fi |
| 3722 |
% |
| 3723 |
% \begin{ltxsyntax} |
| 3724 |
% \dipoledesc{optwedge} |
| 3725 |
% \iffalse |
| 3726 |
%<*ignore> |
| 3727 |
% \fi |
| 3728 |
\begin{LTXexample} |
| 3729 |
\begin{pspicture}(3,2) |
| 3730 |
\optwedge[beam](0,1)(3,1){Wedge} |
| 3731 |
\end{pspicture} |
| 3732 |
\end{LTXexample} |
| 3733 |
% \iffalse |
| 3734 |
%</ignore> |
| 3735 |
% \fi |
| 3736 |
% \end{ltxsyntax} |
| 3737 |
% |
| 3738 |
% \begin{optionlist} |
| 3739 |
% \numitem[0.8]{wedgeheight} |
| 3740 |
% \ifGERMAN Höhe des Keils.\fi |
| 3741 |
% \ifENGLISH The height of the wedge.\fi |
| 3742 |
% |
| 3743 |
% \numitem[10]{wedgeangleright} |
| 3744 |
% \ifGERMAN Der obere Winkel der rechten Grenzfläche bezogen auf die Vertikale.\fi |
| 3745 |
% \ifENGLISH The upper angle of the right interface with respect to a vertical line.\fi |
| 3746 |
% |
| 3747 |
% \numitem[0]{wedgeangleleft} |
| 3748 |
% \ifGERMAN Der obere Winkel der linken Grenzfläche bezogen auf die Vertikale.\fi |
| 3749 |
% \ifENGLISH The upper angle of the left interface with respect to a vertical line.\fi |
| 3750 |
% |
| 3751 |
% \optitem{wedgeangles}{\prm{left}[ \prm{right}]} |
| 3752 |
% \ifGERMAN |
| 3753 |
% Erlaubt beide Winkel gleichzeitig zu setzen. Wird nur ein Wert |
| 3754 |
% angegeben, dann wird dieser für beide Winkel verwendet. |
| 3755 |
% \fi |
| 3756 |
% \ifENGLISH |
| 3757 |
% Allows setting both angles at once. If only a single value is given, |
| 3758 |
% it is used for both angles. |
| 3759 |
% \fi |
| 3760 |
% \numitem[0]{wedgewidth} |
| 3761 |
% \ifGERMAN Ist der Wert größer als die berechnete Grundbreite, dann wird der Keil auf die angegebene Breite vergrößert.\fi |
| 3762 |
% \ifENGLISH If this value is larger than the calculated base width, then the wedge's width is increase to this value.\fi |
| 3763 |
% \iffalse |
| 3764 |
%<*ignore> |
| 3765 |
% \fi |
| 3766 |
\begin{LTXexample} |
| 3767 |
\begin{pspicture}(2,1) |
| 3768 |
\optwedge[wedgeangles=10 0, wedgewidth=0.4](0,0.5)(2,0.5) |
| 3769 |
\drawwidebeam[beamwidth=0.5](0,0.5){}(2,0.5) |
| 3770 |
\end{pspicture} |
| 3771 |
\end{LTXexample} |
| 3772 |
% \iffalse |
| 3773 |
%</ignore> |
| 3774 |
% \fi |
| 3775 |
% |
| 3776 |
% \end{optionlist} |
| 3777 |
% |
| 3778 |
% \ifGERMAN\section{Axikon}\fi |
| 3779 |
% \ifENGLISH\section{Axicon}\fi |
| 3780 |
% |
| 3781 |
% \begin{ltxsyntax} |
| 3782 |
% \dipoledesc{axicon} |
| 3783 |
% \iffalse |
| 3784 |
%<*ignore> |
| 3785 |
% \fi |
| 3786 |
\begin{LTXexample} |
| 3787 |
\begin{pspicture}(3,2) |
| 3788 |
\axicon[label=1](0,1)(3,1){Axicon} |
| 3789 |
\drawwidebeam[beamwidth=0.5](0,1){}(3,1) |
| 3790 |
\end{pspicture} |
| 3791 |
\end{LTXexample} |
| 3792 |
% \iffalse |
| 3793 |
%</ignore> |
| 3794 |
% \fi |
| 3795 |
% \end{ltxsyntax} |
| 3796 |
% |
| 3797 |
% \begin{optionlist} |
| 3798 |
% \numitem[1.5]{axiconheight} |
| 3799 |
% \ifGERMAN Die Höhe des Axikons.\fi |
| 3800 |
% \ifENGLISH The height of the axicon.\fi |
| 3801 |
% |
| 3802 |
% \numitem[0.4]{axiconwidth} |
| 3803 |
% \ifGERMAN Die Breite des Axikons.\fi |
| 3804 |
% \ifENGLISH The width of the axicon.\fi |
| 3805 |
% |
| 3806 |
% \numitem[10]{axiconangle} |
| 3807 |
% \ifGERMAN Der obere Winkel der rechten Grenzfläche bezogen auf die Vertikale.\fi |
| 3808 |
% \ifENGLISH The upper angle of the right interface with respect to a vertical line.\fi |
| 3809 |
% |
| 3810 |
% \end{optionlist} |
| 3811 |
% |
| 3812 |
% \ifGERMAN\section{Spiegel}\fi |
| 3813 |
% \ifENGLISH\section{Mirror}\fi |
| 3814 |
% |
| 3815 |
% \begin{ltxsyntax} |
| 3816 |
% \tripoledesc{mirror} |
| 3817 |
% \iffalse |
| 3818 |
%<*ignore> |
| 3819 |
% \fi |
| 3820 |
\begin{LTXexample} |
| 3821 |
\begin{pspicture}(3,2) |
| 3822 |
\mirror[beam](0,0)(1.8,1.5)(0,2){M} |
| 3823 |
\end{pspicture} |
| 3824 |
\end{LTXexample} |
| 3825 |
% \iffalse |
| 3826 |
%</ignore> |
| 3827 |
% \fi |
| 3828 |
% \end{ltxsyntax} |
| 3829 |
% |
| 3830 |
% \begin{optionlist} |
| 3831 |
% \numitem[1]{mirrorwidth} |
| 3832 |
% \ifGERMAN Die Breite des Spiegels.\fi |
| 3833 |
% \ifENGLISH The width of the mirror.\fi |
| 3834 |
% |
| 3835 |
% \optitem[2\nxLcs{pslinewidth}]{mirrorlinewidth}{\prm{num} or \prm{dimen}} |
| 3836 |
% \ifGERMAN \linewidthexplanation{des Spiegels}{Spiegel}\fi |
| 3837 |
% \ifENGLISH \linewidthexplanation{mirror}{mirrors}\fi |
| 3838 |
% |
| 3839 |
% \optitem[0]{mirrorradius}{\prm{radius}[ 0]} |
| 3840 |
% \ifGERMAN |
| 3841 |
% Diese Parameter setzt die Krümmung des Spiegels. Null ergibt einen |
| 3842 |
% ebenen, ein negativer Radius einen konvexen und ein positiver Radius |
| 3843 |
% einen konkaven Spiegel. |
| 3844 |
% \fi |
| 3845 |
% \ifENGLISH |
| 3846 |
% This parameter defines the curvature of the mirror. A value of \opt{0} |
| 3847 |
% is for a plain mirror, a negative radius for a convex mirror and a |
| 3848 |
% positive radius gives you a concave mirror. |
| 3849 |
% \fi |
| 3850 |
% |
| 3851 |
% \iffalse |
| 3852 |
%<*ignore> |
| 3853 |
% \fi |
| 3854 |
\begin{LTXexample}[morekeywords={[21]{mirrorradius}}] |
| 3855 |
\begin{pspicture}(3,3) |
| 3856 |
\psset[optexp]{labeloffset=0.5} |
| 3857 |
\mirror[mirrorradius=1](0,0)(1,2)(1.8,1){convex} |
| 3858 |
\mirror[mirrorradius=-1](1,2)(1.8,1)(2.5,3){concave} |
| 3859 |
\drawbeam(0,0){-}(2.5,3) |
| 3860 |
\end{pspicture} |
| 3861 |
\end{LTXexample} |
| 3862 |
% \iffalse |
| 3863 |
%</ignore> |
| 3864 |
% \fi |
| 3865 |
% |
| 3866 |
% \ifGERMAN Wird kein zweiter Wert angegeben, so ist die Krümmung der |
| 3867 |
% zweiten Fläche eines \opt{extended} oder \opt{semitrans} Spiegels die |
| 3868 |
% Gleiche wie bei der Hauptgrenzfläche (siehe vorheriges Beispiel). Wird |
| 3869 |
% die Null als zweiter Wert angegeben (andere Werte werden nicht |
| 3870 |
% unterstützt), so ist die zweite Fläche flach: |
| 3871 |
% \fi |
| 3872 |
% \ifENGLISH If no second value is specified, the curvature of the |
| 3873 |
% second interface of an \opt{extended} or \opt{semitrans} mirror is the |
| 3874 |
% same as that of the main interface (see previous example). If zero is |
| 3875 |
% given as second value (other values are not supported), the second |
| 3876 |
% interface is plain. |
| 3877 |
% \fi |
| 3878 |
% |
| 3879 |
% \iffalse |
| 3880 |
%<*ignore> |
| 3881 |
% \fi |
| 3882 |
\begin{LTXexample}[morekeywords={[21]{mirrorradius}}] |
| 3883 |
\begin{pspicture}(3,3) |
| 3884 |
\mirror[mirrorradius=1 0, mirrortype=semitrans](0,0)(1,2)(1.8,1){convex} |
| 3885 |
\mirror[mirrorradius=-1 0, mirrortype=extended](1,2)(1.8,1)(2.5,3){concave} |
| 3886 |
\drawbeam(0,0){-}(2.5,3) |
| 3887 |
\end{pspicture} |
| 3888 |
\end{LTXexample} |
| 3889 |
% \iffalse |
| 3890 |
%</ignore> |
| 3891 |
% \fi |
| 3892 |
% |
| 3893 |
% \ifGERMAN Die Angabe von \Lkeyword{mirrordepth} bezieht sich immer auf |
| 3894 |
% die Mindesttiefe des Spiegels. |
| 3895 |
% \fi |
| 3896 |
% \ifENGLISH The value of \Lkeyword{mirrordepth} always refers to the |
| 3897 |
% minimum depth of the mirror. |
| 3898 |
% \fi |
| 3899 |
% |
| 3900 |
% \iffalse |
| 3901 |
%<*ignore> |
| 3902 |
% \fi |
| 3903 |
\begin{LTXexample}[morekeywords={[21]{mirrorradius, mirrordepth}}] |
| 3904 |
\begin{pspicture}(3,3) |
| 3905 |
\psset[optexp]{mirrordepth=0.2} |
| 3906 |
\mirror[mirrorradius=1 0, mirrortype=semitrans](0,0)(1,2)(1.8,1){convex} |
| 3907 |
\mirror[mirrorradius=-1 0, mirrortype=extended](1,2)(1.8,1)(2.5,3){concave} |
| 3908 |
\drawbeam(0,0){-}(2.5,3) |
| 3909 |
\end{pspicture} |
| 3910 |
\end{LTXexample} |
| 3911 |
% \iffalse |
| 3912 |
%</ignore> |
| 3913 |
% \fi |
| 3914 |
% |
| 3915 |
% \choitem[plain]{mirrortype}{plain, piezo, extended, semitrans} |
| 3916 |
% \ifGERMAN |
| 3917 |
% Diese Parameter wählt die Spiegelart aus. Das Aussehen wird mit |
| 3918 |
% \Lstyle{PiezoMirror}, \Lstyle{ExtendedMirror} und \Lstyle{SemitransMirror} |
| 3919 |
% gesteuert. |
| 3920 |
% \fi |
| 3921 |
% \ifENGLISH |
| 3922 |
% The \nxLkeyword{mirrortype} selects between different types of mirrors. The |
| 3923 |
% style is controlled with \Lstyle{PiezoMirror}, \Lstyle{ExtendedMirror}, and |
| 3924 |
% \Lstyle{SemitransMirror}. |
| 3925 |
% \fi |
| 3926 |
% |
| 3927 |
% \iffalse |
| 3928 |
%<*ignore> |
| 3929 |
% \fi |
| 3930 |
\begin{LTXexample}[morekeywords={[21]{mirrortype}}] |
| 3931 |
\begin{pspicture}(3,2) |
| 3932 |
\mirror[mirrortype=extended, |
| 3933 |
beam](0,0)(1.8,1.5)(0,2){ext} |
| 3934 |
\end{pspicture} |
| 3935 |
\end{LTXexample} |
| 3936 |
% \iffalse |
| 3937 |
%</ignore> |
| 3938 |
% \fi |
| 3939 |
% |
| 3940 |
% \ifGERMAN Beachten Sie, dass der Anschlussdraht für den Piezospiegel nicht |
| 3941 |
% gezeichnet wird, falls \Lkeyword{extnode} verwendet wird. |
| 3942 |
% \fi |
| 3943 |
% \ifENGLISH Note, that the default piece of wire is omitted when using |
| 3944 |
% \Lkeyword{extnode} with a piezo mirror. |
| 3945 |
% \fi |
| 3946 |
% \iffalse |
| 3947 |
%<*ignore> |
| 3948 |
% \fi |
| 3949 |
\begin{LTXexample}[morekeywords={[21]{mirrortype}}] |
| 3950 |
\begin{pspicture}(3,2) |
| 3951 |
\mirror[mirrortype=piezo, |
| 3952 |
beam](0,0)(1.8,1.5)(0,2){piezo} |
| 3953 |
\end{pspicture} |
| 3954 |
\end{LTXexample} |
| 3955 |
% \iffalse |
| 3956 |
%</ignore> |
| 3957 |
% \fi |
| 3958 |
% |
| 3959 |
% \ifGERMAN Ein halbdurchlässiger Spiegel (\opt{semitrans}) hat, im Gegensatz zu |
| 3960 |
% den anderen Spiegeltypen, zwei Grenzflächen, deren Abstand und Position vom |
| 3961 |
% Wert und Vorzeichen von \Lkeyword{mirrordepth} abhängt. |
| 3962 |
% \fi |
| 3963 |
% \ifENGLISH A semi-transparent mirror (\opt{semitrans}) has two interfaces, in |
| 3964 |
% contrast to the other mirror types. Their distance and position depends on the |
| 3965 |
% value and sign of \Lkeyword{mirrordepth}. |
| 3966 |
% \fi |
| 3967 |
% \iffalse |
| 3968 |
%<*ignore> |
| 3969 |
% \fi |
| 3970 |
\begin{LTXexample}[morekeywords={[21]{mirrortype, mirrordepth}}] |
| 3971 |
\psset{unit=1.5} |
| 3972 |
\begin{pspicture}(2,2) |
| 3973 |
\mirror[mirrortype=semitrans](0,1)(1,1)(1,0) |
| 3974 |
\drawbeam(0,1){}(1,0) |
| 3975 |
\drawbeam[linecolor=red](2,1){}(1,2) |
| 3976 |
\drawbeam[beampos=0.05, linecolor=blue](0,1){}(2,1) |
| 3977 |
\end{pspicture} |
| 3978 |
\end{LTXexample} |
| 3979 |
|
| 3980 |
\begin{LTXexample}[morekeywords={[21]{mirrortype, mirrordepth}}] |
| 3981 |
\psset{unit=1.5} |
| 3982 |
\begin{pspicture}(2,2) |
| 3983 |
\mirror[mirrortype=semitrans, mirrordepth=-0.15](0,1)(1,1)(1,0) |
| 3984 |
\drawbeam(0,1){}(1,0) |
| 3985 |
\drawbeam[linecolor=red](2,1){}(1,2) |
| 3986 |
\drawbeam[beampos=0.05, linecolor=blue](0,1){}(2,1) |
| 3987 |
\end{pspicture} |
| 3988 |
\end{LTXexample} |
| 3989 |
% \iffalse |
| 3990 |
%</ignore> |
| 3991 |
% \fi |
| 3992 |
% |
| 3993 |
% \ifGERMAN Eine negative Spiegeltiefe \Lkeyword{mirrordepth} ist |
| 3994 |
% äquivalent zu einer positiven Tiefe kombiniert mit |
| 3995 |
% \Lkeyword{angle}\opt{=180}. |
| 3996 |
% \fi |
| 3997 |
% \ifENGLISH A negative \Lkeyword{mirrordepth} is equivalent to a |
| 3998 |
% positive depth combined with \Lkeyword{angle}\opt{=180}. |
| 3999 |
% \fi |
| 4000 |
% |
| 4001 |
% \boolitem[false]{variable} |
| 4002 |
% \ifGERMAN |
| 4003 |
% Zeichnet einen verstellbaren Spiegel, der mit zwei zusätzlichen gekrümmten |
| 4004 |
% Pfeilen an beiden Seiten angedeutet wird. Das Aussehen, inklusive der Pfeile, |
| 4005 |
% wird von \Lstyle{VariableStyle} vorgegeben. |
| 4006 |
% \fi |
| 4007 |
% \ifENGLISH |
| 4008 |
% Draw an adjustable mirror which has two additional curved arrows on both |
| 4009 |
% sides. The appearance including the arrow types is determined by |
| 4010 |
% \Lstyle{VariableStyle}. |
| 4011 |
% \fi |
| 4012 |
% \iffalse |
| 4013 |
%<*ignore> |
| 4014 |
% \fi |
| 4015 |
\begin{LTXexample}[morekeywords={[21]{variable}}] |
| 4016 |
\begin{pspicture}(3,2) |
| 4017 |
\mirror[beam, variable](0,0)(1.8,1.5)(0,2){var} |
| 4018 |
\end{pspicture} |
| 4019 |
\end{LTXexample} |
| 4020 |
% \iffalse |
| 4021 |
%</ignore> |
| 4022 |
% \fi |
| 4023 |
% |
| 4024 |
% \numitem[0.1]{mirrordepth} |
| 4025 |
% \ifGERMAN Die Gesamttiefe eines breiten Spiegels.\fi |
| 4026 |
% \ifENGLISH The total depth of an extended mirror.\fi |
| 4027 |
% \iffalse |
| 4028 |
%<*ignore> |
| 4029 |
% \fi |
| 4030 |
\begin{LTXexample}[morekeywords={[21]{mirrortype, mirrordepth}}] |
| 4031 |
\begin{pspicture}(3,2) |
| 4032 |
\mirror[mirrortype=extended, mirrordepth=0.2, |
| 4033 |
beam](0,0)(1.8,1.5)(0,2) |
| 4034 |
\end{pspicture} |
| 4035 |
\end{LTXexample} |
| 4036 |
% \iffalse |
| 4037 |
%</ignore> |
| 4038 |
% \fi |
| 4039 |
% \end{optionlist} |
| 4040 |
% |
| 4041 |
% \begin{stylelist} |
| 4042 |
% \styleitem[linestyle=none, hatchwidth=0.5\cs{pslinewidth}, hatchsep=1.4\cs{pslinewidth}, fillstyle=hlines]{ExtendedMirror} |
| 4043 |
% \ifGERMAN Der Stil für den \opt{extended} Spiegel.\fi |
| 4044 |
% \ifENGLISH The style for the \opt{extended} mirror.\fi |
| 4045 |
% \iffalse |
| 4046 |
%<*ignore> |
| 4047 |
% \fi |
| 4048 |
\begin{LTXexample}[morekeywords={[21]{mirrortype, ExtendedMirror}}] |
| 4049 |
\begin{pspicture}(3,2) |
| 4050 |
\newpsstyle{ExtendedMirror}{fillstyle=solid, |
| 4051 |
fillcolor=Gold, |
| 4052 |
linestyle=none} |
| 4053 |
\mirror[mirrortype=extended, |
| 4054 |
beam](0,0)(1.8,1.5)(0,2){ext} |
| 4055 |
\end{pspicture} |
| 4056 |
\end{LTXexample} |
| 4057 |
% \iffalse |
| 4058 |
%</ignore> |
| 4059 |
% \fi |
| 4060 |
% |
| 4061 |
% \styleitem[fillstyle=solid, fillcolor=black!30]{PiezoMirror} |
| 4062 |
% \ifGERMAN |
| 4063 |
% Der Stil für den \opt{piezo} Spiegel. Dieser kann auch dazu verwendet |
| 4064 |
% werden, die Größe des Piezos zu verändern, wie in dem folgenden Beispiel zu sehen ist. |
| 4065 |
% \fi |
| 4066 |
% \ifENGLISH |
| 4067 |
% This style defines the appearance of the \opt{piezo} mirror. This can also |
| 4068 |
% be used to change the size of piezo part, as the example shows. |
| 4069 |
% \fi |
| 4070 |
% \iffalse |
| 4071 |
%<*ignore> |
| 4072 |
% \fi |
| 4073 |
\begin{LTXexample}[morekeywords={[21]{mirrortype, PiezoMirror}}] |
| 4074 |
\begin{pspicture}(3,2) |
| 4075 |
\addtopsstyle{PiezoMirror}{xunit=2} |
| 4076 |
\mirror[mirrortype=piezo, |
| 4077 |
beam](0,0)(1.8,1.5)(0,2){piezo} |
| 4078 |
\end{pspicture} |
| 4079 |
\end{LTXexample} |
| 4080 |
% \iffalse |
| 4081 |
%</ignore> |
| 4082 |
% \fi |
| 4083 |
% |
| 4084 |
% \styleitem[linestyle=none, fillstyle=solid, fillcolor=black!30]{SemitransMirror} |
| 4085 |
% \ifGERMAN |
| 4086 |
% Der Stil für den \opt{semitrans} Spiegel. |
| 4087 |
% \fi |
| 4088 |
% \ifENGLISH |
| 4089 |
% This style defines the appearance of the \opt{semitrans} mirror. |
| 4090 |
% \fi |
| 4091 |
% \end{stylelist} |
| 4092 |
% |
| 4093 |
% \ifGERMAN\section{Parabolspiegel}\fi |
| 4094 |
% \ifENGLISH\section{Parabolic mirror}\fi |
| 4095 |
% |
| 4096 |
% \begin{ltxsyntax} |
| 4097 |
% \dipoledesc{parabolicmirror} |
| 4098 |
% \iffalse |
| 4099 |
%<*ignore> |
| 4100 |
% \fi |
| 4101 |
\begin{LTXexample} |
| 4102 |
\begin{pspicture}(3,2) |
| 4103 |
\parabolicmirror(0,1)(2,1){PM} |
| 4104 |
\end{pspicture} |
| 4105 |
\end{LTXexample} |
| 4106 |
% \iffalse |
| 4107 |
%</ignore> |
| 4108 |
% \fi |
| 4109 |
% \end{ltxsyntax} |
| 4110 |
% |
| 4111 |
% \begin{optionlist} |
| 4112 |
% \numitem[1]{parmirrorwidth} |
| 4113 |
% \ifGERMAN Die Breite des Parabolspiegels.\fi |
| 4114 |
% \ifENGLISH The width of the parabolic mirror.\fi |
| 4115 |
% |
| 4116 |
% \numitem[1]{parmirrorheight} |
| 4117 |
% \ifGERMAN Die Höhe des Parabolspiegels.\fi |
| 4118 |
% \ifENGLISH The height of the parabolic mirror.\fi |
| 4119 |
% \end{optionlist} |
| 4120 |
% |
| 4121 |
% \iffalse |
| 4122 |
%<*ignore> |
| 4123 |
% \fi |
| 4124 |
\begin{LTXexample} |
| 4125 |
\begin{pspicture}(0,-2)(3,2) |
| 4126 |
\parabolicmirror[parmirrorheight=4, parmirrorwidth=2](0,0)(3,0) |
| 4127 |
\addtopsstyle{Beam}{beamalign=abs, linewidth=0.2\pslinewidth, beaminsidelast, stopinsidecount=1} |
| 4128 |
\multido{\r=-1.55+0.1}{33}{% |
| 4129 |
\drawbeam[beampos=\r](0,0){1}} |
| 4130 |
\end{pspicture} |
| 4131 |
\end{LTXexample} |
| 4132 |
|
| 4133 |
\begin{LTXexample} |
| 4134 |
\begin{pspicture}(0,-1)(3,1) |
| 4135 |
\optplane(0,0) |
| 4136 |
\parabolicmirror[parmirrorheight=2, parmirrorwidth=1.5](0,0)(3,0) |
| 4137 |
\addtopsstyle{Beam}{arrows=->, beamalign=abs} |
| 4138 |
\drawbeam[beampos=0.5, linecolor=red]{1}{2}{1} |
| 4139 |
\end{pspicture} |
| 4140 |
\end{LTXexample} |
| 4141 |
% \iffalse |
| 4142 |
%</ignore> |
| 4143 |
% \fi |
| 4144 |
% |
| 4145 |
% \ifGERMAN\section{Off-axis-Parabolspiegel}\fi |
| 4146 |
% \ifENGLISH\section{Off-axis parabolic mirror}\fi |
| 4147 |
% |
| 4148 |
% \begin{ltxsyntax} |
| 4149 |
% \xLtripole{oapmirror}% |
| 4150 |
% \compitem{oapmirror}[options](in)(center)(focus){label}% |
| 4151 |
% \iffalse |
| 4152 |
%<*ignore> |
| 4153 |
% \fi |
| 4154 |
\begin{LTXexample} |
| 4155 |
\begin{pspicture}(3,2.5) |
| 4156 |
\oapmirror(3,2)(1,2)(2,0){OAP} |
| 4157 |
\drawwidebeam[beamwidth=0.5](3,2){1}(2,0) |
| 4158 |
\end{pspicture} |
| 4159 |
\end{LTXexample} |
| 4160 |
% \iffalse |
| 4161 |
%</ignore> |
| 4162 |
% \fi |
| 4163 |
% \end{ltxsyntax} |
| 4164 |
% |
| 4165 |
% \begin{optionlist} |
| 4166 |
% \optitem[1]{oapmirroraperture}{\prm{num} or \prm{inner} \prm{outer}} |
| 4167 |
% \ifGERMAN |
| 4168 |
% Apertur des Spiegels bezogen auf die Eingangsrichtung. Wird eine |
| 4169 |
% Zahl angegeben, dann gibt diese die gesamte Apertur an, die vertikal |
| 4170 |
% und symmetrisch zur Verbindung zwischen \prm{in} und \prm{center} |
| 4171 |
% gemessen wird. Bei zwei Zahlen geben diese die innere und äußere |
| 4172 |
% Apertur an. |
| 4173 |
% \fi |
| 4174 |
% \ifENGLISH |
| 4175 |
% Mirror aperture with respect to the input direction. If a single |
| 4176 |
% number is given, it specifies the whole aperture, measured |
| 4177 |
% perpendicularly and symmetric to the connection from \prm{in} to |
| 4178 |
% \prm{center}. Two numbers give the inner and the outer apertures. |
| 4179 |
% \fi |
| 4180 |
% \end{optionlist} |
| 4181 |
% |
| 4182 |
% \ifGERMAN \newpage |
| 4183 |
% Die Konstruktion des Spiegels anhand der vorgegebenen Punkte geschieht |
| 4184 |
% wie folgt: Die Gerade von Knoten \prm{in} zu \prm{center} liegt |
| 4185 |
% parallel zur optischen Achse, \prm{focus} gibt den Fokuspunkt der |
| 4186 |
% Parabel an. Die Apertur des Spiegels wird mittels des Parameters |
| 4187 |
% \Lkeyword{oapmirroraperture} angegeben, gemessen senkrecht zum |
| 4188 |
% einfallenden Strahl. |
| 4189 |
% |
| 4190 |
% Die unterschiedlichen Parameter und die zugrundeliegende ganze Parabel |
| 4191 |
% sind in der folgenden Skizze dargestellt: |
| 4192 |
% \fi |
| 4193 |
% \ifENGLISH |
| 4194 |
% The mirror construction using the given nodes is done as follows: the |
| 4195 |
% line from node \prm{in} to \prm{center} is parallel to the optical |
| 4196 |
% axis, \prm{focus} specifies the focal point of the parabola. The |
| 4197 |
% mirror aperture is given by the parameter |
| 4198 |
% \Lkeyword{oapmirroraperture}, measured perpendicular to the incoming |
| 4199 |
% beam. |
| 4200 |
% |
| 4201 |
% The different parameters and the whole original parabola are shown in |
| 4202 |
% the following illustration: |
| 4203 |
% \fi |
| 4204 |
% |
| 4205 |
% \iffalse |
| 4206 |
%<*ignore> |
| 4207 |
% \fi |
| 4208 |
\ifENGLISH |
| 4209 |
\begin{LTXexample}[linerange={1-2,4-6,15-15}] |
| 4210 |
\begin{pspicture}(6,5) |
| 4211 |
\pnodes(5.5,3){In}(1.5,3){Center}(1.5,1.5){Focus} |
| 4212 |
\oapmirror[oapmirroraperture=3 2, linestyle=dashed, style=Refline](In)(Center)(Focus) |
| 4213 |
\oapmirror[oapmirroraperture=1.5, linewidth=3\pslinewidth, plotpoints=200](In)(Center)(Focus){OAP} |
| 4214 |
\multido{\r=-0.5+0.5}{3}{% |
| 4215 |
\drawbeam[beampos=\r](In){}(Focus)} |
| 4216 |
\psset{style=Refline}\color{Refline} |
| 4217 |
\psdot(In)\uput[0](In){In}\psdot(Center)\uput[180](Center){\rput[r](0,0){Center}}\psdot(Focus)\uput[-90](Focus){Focus} |
| 4218 |
\pnodes([Xnodesep=1]Center){TmpA}([Xnodesep=1,offset=0.75]Center){TmpB} |
| 4219 |
\psline[arrowscale=1.5, arrows=<->](TmpA)(TmpB)\rput[l]([Xnodesep=0.3]TmpB){outer aperture} |
| 4220 |
\pnode([Xnodesep=1,offset=-0.75]Center){TmpB} |
| 4221 |
\psline[arrowscale=1.5, arrows=<->](TmpA)(TmpB)\rput[l]([Xnodesep=0.3]TmpB){inner aperture} |
| 4222 |
\pnode(In|Focus){Tmp} |
| 4223 |
\psline[linestyle=dotted]([Xnodesep=-1.5]Focus)(Tmp)\rput[r]([offset=-0.5]Tmp){optical axis} |
| 4224 |
\end{pspicture} |
| 4225 |
\end{LTXexample} |
| 4226 |
\fi\ifGERMAN |
| 4227 |
\begin{LTXexample}[linerange={1-2,4-6,15-15}] |
| 4228 |
\begin{pspicture}(6,5) |
| 4229 |
\pnodes(5.5,3){In}(1.5,3){Center}(1.5,1.5){Focus} |
| 4230 |
\oapmirror[oapmirroraperture=3 2, linestyle=dashed, style=Refline](In)(Center)(Focus) |
| 4231 |
\oapmirror[oapmirroraperture=1.5, linewidth=3\pslinewidth, plotpoints=200](In)(Center)(Focus){OAP} |
| 4232 |
\multido{\r=-0.5+0.5}{3}{% |
| 4233 |
\drawbeam[beampos=\r](In){}(Focus)} |
| 4234 |
\psset{style=Refline}\color{Refline} |
| 4235 |
\psdot(In)\uput[0](In){In}\psdot(Center)\uput[180](Center){\rput[r](0,0){Center}}\psdot(Focus)\uput[-90](Focus){Focus} |
| 4236 |
\pnodes([Xnodesep=1]Center){TmpA}([Xnodesep=1,offset=0.75]Center){TmpB} |
| 4237 |
\psline[arrowscale=1.5, arrows=<->](TmpA)(TmpB)\rput[l]([Xnodesep=0.3]TmpB){aeussere Apertur} |
| 4238 |
\pnode([Xnodesep=1,offset=-0.75]Center){TmpB} |
| 4239 |
\psline[arrowscale=1.5, arrows=<->](TmpA)(TmpB)\rput[l]([Xnodesep=0.3]TmpB){innere Apertur} |
| 4240 |
\pnode(In|Focus){Tmp} |
| 4241 |
\psline[linestyle=dotted]([Xnodesep=-1.5]Focus)(In|Focus)\rput[r]([offset=-0.5]Tmp){optische Achse} |
| 4242 |
\end{pspicture} |
| 4243 |
\end{LTXexample} |
| 4244 |
\fi |
| 4245 |
% \iffalse |
| 4246 |
%</ignore> |
| 4247 |
% \fi |
| 4248 |
% |
| 4249 |
% |
| 4250 |
% \ifGERMAN\section{Strahlteiler}\fi |
| 4251 |
% \ifENGLISH\section{Beamsplitter}\fi |
| 4252 |
% |
| 4253 |
% \begin{ltxsyntax} |
| 4254 |
% \tripoledesc{beamsplitter} |
| 4255 |
% \iffalse |
| 4256 |
%<*ignore> |
| 4257 |
% \fi |
| 4258 |
\begin{LTXexample} |
| 4259 |
\begin{pspicture}(3,2) |
| 4260 |
\beamsplitter[beam](0,1)(2,1)(2,0){BS} |
| 4261 |
\end{pspicture} |
| 4262 |
\end{LTXexample} |
| 4263 |
% \iffalse |
| 4264 |
%</ignore> |
| 4265 |
% \fi |
| 4266 |
% \end{ltxsyntax} |
| 4267 |
% |
| 4268 |
% \begin{optionlist} |
| 4269 |
% \numitem[0.8]{bssize} |
| 4270 |
% \ifGERMAN Die Größe des Strahlteilers.\fi |
| 4271 |
% \ifENGLISH The beamsplitter size.\fi |
| 4272 |
% |
| 4273 |
% \choitem[cube]{bsstyle}{cube, plate} |
| 4274 |
% \ifGERMAN |
| 4275 |
% Wählt zwischen zwei Strahlteilertypen: einem Strahlteilerwürfel (\opt{cube}) |
| 4276 |
% und einem halbdurchlässigen Spiegel (\opt{plate}). Dieser halbdurchlässige |
| 4277 |
% Spiegel ist äquivalent zu \Lcomp{mirror} mit |
| 4278 |
% \Lkeyword{mirrortype}\opt{=semitrans} für \Lkeyword{mirrordepth}\opt{=0}. |
| 4279 |
% \fi |
| 4280 |
% \ifENGLISH |
| 4281 |
% Selects between two types of beamsplitters: the beamsplitter cube (\opt{cube}) |
| 4282 |
% and the semitransparent mirror (\opt{plate}). This semitransparent mirror ist |
| 4283 |
% equivalent to \Lcomp{mirror} with \Lkeyword{mirrortype}\opt{=semitrans} and |
| 4284 |
% \Lkeyword{mirrordepth}\opt{=0}. |
| 4285 |
% \fi |
| 4286 |
% \iffalse |
| 4287 |
%<*ignore> |
| 4288 |
% \fi |
| 4289 |
\begin{LTXexample}[morekeywords={[21]{bsstyle}}] |
| 4290 |
\begin{pspicture}(3,2) |
| 4291 |
\beamsplitter[bsstyle=plate, beam](0,1)(2,1)(2,0){BS} |
| 4292 |
\end{pspicture} |
| 4293 |
\end{LTXexample} |
| 4294 |
% \iffalse |
| 4295 |
%</ignore> |
| 4296 |
% \fi |
| 4297 |
% \end{optionlist} |
| 4298 |
% |
| 4299 |
% \ifGERMAN\section{Optisches Gitter}\fi |
| 4300 |
% \ifENGLISH\section{Optical grating}\fi |
| 4301 |
% |
| 4302 |
% \begin{ltxsyntax} |
| 4303 |
% \tripoledesc{optgrating} |
| 4304 |
% \iffalse |
| 4305 |
%<*ignore> |
| 4306 |
% \fi |
| 4307 |
\begin{LTXexample} |
| 4308 |
\begin{pspicture}(3,2) |
| 4309 |
\optgrating[beam](0,2)(1.8,1.5)(0,0){G} |
| 4310 |
\end{pspicture} |
| 4311 |
\end{LTXexample} |
| 4312 |
% \iffalse |
| 4313 |
%</ignore> |
| 4314 |
% \fi |
| 4315 |
% \end{ltxsyntax} |
| 4316 |
% |
| 4317 |
% \begin{optionlist} |
| 4318 |
% \numitem[1]{gratingwidth} |
| 4319 |
% \ifGERMAN Die Breite des Gitters.\fi |
| 4320 |
% \ifENGLISH The width of the grating.\fi |
| 4321 |
% |
| 4322 |
% \numitem[0.15]{gratingheight} |
| 4323 |
% \ifGERMAN Die Gesamthöhe des Gitters.\fi |
| 4324 |
% \ifENGLISH The total height of the grating.\fi |
| 4325 |
% |
| 4326 |
% \numitem[0.075]{gratingdepth} |
| 4327 |
% \ifGERMAN |
| 4328 |
% Die absolute Modulationstiefe der Gitterstruktur. Die Gesamthöhe wird |
| 4329 |
% an diesen Wert angepasst falls sie kleiner als die Modulationtiefe ist, |
| 4330 |
% andernfalls wird sie nicht beinflusst. |
| 4331 |
% \fi |
| 4332 |
% \ifENGLISH |
| 4333 |
% The modulation depth of the grating structure. The total height is |
| 4334 |
% adapted to this value if it is smaller than the modulation |
| 4335 |
% depth. Otherwise the total height is not affected. |
| 4336 |
% \fi |
| 4337 |
% \iffalse |
| 4338 |
%<*ignore> |
| 4339 |
% \fi |
| 4340 |
\begin{LTXexample}[morekeywords={[21]{gratingdepth}}] |
| 4341 |
\begin{pspicture}(3,2) |
| 4342 |
\optgrating[gratingdepth=0.05, |
| 4343 |
beam](0,2)(1.8,1.5)(0,0){G} |
| 4344 |
\end{pspicture} |
| 4345 |
\end{LTXexample} |
| 4346 |
% \iffalse |
| 4347 |
%</ignore> |
| 4348 |
% \fi |
| 4349 |
% |
| 4350 |
% \intitem[10]{gratingcount} |
| 4351 |
% \ifGERMAN Die Anzahl der Gitterlinien.\fi |
| 4352 |
% \ifENGLISH The number of grating grooves.\fi |
| 4353 |
% \iffalse |
| 4354 |
%<*ignore> |
| 4355 |
% \fi |
| 4356 |
\begin{LTXexample}[morekeywords={[21]{gratingcount}}] |
| 4357 |
\begin{pspicture}(3,2) |
| 4358 |
\optgrating[gratingcount=3, |
| 4359 |
beam](0,2)(1.8,1.5)(0,0){G} |
| 4360 |
\end{pspicture} |
| 4361 |
\end{LTXexample} |
| 4362 |
% \iffalse |
| 4363 |
%</ignore> |
| 4364 |
% \fi |
| 4365 |
% |
| 4366 |
% \choitem[blazed]{gratingtype}{blazed, binary} |
| 4367 |
% \ifGERMAN |
| 4368 |
% Wählt zwischen einem binären Gitter (\opt{binary}) und einem Blazegitter |
| 4369 |
% (\opt{blazed}). |
| 4370 |
% \fi |
| 4371 |
% \ifENGLISH |
| 4372 |
% Select between a \opt{binary} and a \opt{blazed} grating. |
| 4373 |
% \fi |
| 4374 |
% \iffalse |
| 4375 |
%<*ignore> |
| 4376 |
% \fi |
| 4377 |
\begin{LTXexample}[morekeywords={[21]{gratingtype}}] |
| 4378 |
\begin{pspicture}(3,2) |
| 4379 |
\optgrating[gratingtype=binary, |
| 4380 |
beam](0,2)(1.8,1.5)(0,0){G} |
| 4381 |
\end{pspicture} |
| 4382 |
\end{LTXexample} |
| 4383 |
% \iffalse |
| 4384 |
%</ignore> |
| 4385 |
% \fi |
| 4386 |
% |
| 4387 |
% \choitem[top]{gratingalign}{t, top, c, center} |
| 4388 |
% \ifGERMAN |
| 4389 |
% Wählt, ob die Reflektionsebene auf den Gitterspitzen (\opt{top}), oder |
| 4390 |
% in der Mitte des Gitters (\opt{center}) liegt. Wählt man \opt{center} |
| 4391 |
% aus, macht es Sinn die \Lenv{optexp}-Umgebung oder eine |
| 4392 |
% halbtransparente Strahlfüllung zu verwenden. |
| 4393 |
% \fi |
| 4394 |
% \ifENGLISH |
| 4395 |
% Selects if the reflection plane resides on \opt{top} of the grating or |
| 4396 |
% in its \opt{center}. If you choose \opt{center}, you should use the |
| 4397 |
% \Lenv{optexp} environment or a semitransparent beam filling. |
| 4398 |
% \fi |
| 4399 |
% |
| 4400 |
% \iffalse |
| 4401 |
%<*ignore> |
| 4402 |
% \fi |
| 4403 |
\begin{LTXexample}[morekeywords={[21]{gratingalign}}] |
| 4404 |
\begin{pspicture}(3,2) |
| 4405 |
\pnodes(0.5,0){A}(0.5,1.5){B}(2,1.5){C}(2,0){D} |
| 4406 |
\psset{unit=1.5, labeloffset=0.4} |
| 4407 |
\begin{optexp} |
| 4408 |
\optgrating[gratingalign=top](A)(B)(C){top} |
| 4409 |
\optgrating[gratingalign=center](B)(C)(D){center} |
| 4410 |
\drawwidebeam[fillstyle=solid, fillcolor=green!50, beamwidth=0.5](A){-}(D) |
| 4411 |
\end{optexp} |
| 4412 |
\end{pspicture} |
| 4413 |
\end{LTXexample} |
| 4414 |
% \iffalse |
| 4415 |
%</ignore> |
| 4416 |
% \fi |
| 4417 |
% |
| 4418 |
% \boolitem[false]{reverse} |
| 4419 |
% \ifGERMAN |
| 4420 |
% Invertiert die Steigung des Blazegitters. |
| 4421 |
% \fi |
| 4422 |
% \ifENGLISH |
| 4423 |
% Reverse the slope of the grooves of the \opt{blazed} grating. |
| 4424 |
% \fi |
| 4425 |
% \iffalse |
| 4426 |
%<*ignore> |
| 4427 |
% \fi |
| 4428 |
\begin{LTXexample}[morekeywords={[21]{reverse}}] |
| 4429 |
\begin{pspicture}(3,2) |
| 4430 |
\optgrating[reverse, beam](0,2)(1.8,1.5)(0,0){grating} |
| 4431 |
\end{pspicture} |
| 4432 |
\end{LTXexample} |
| 4433 |
% \iffalse |
| 4434 |
%</ignore> |
| 4435 |
% \fi |
| 4436 |
% |
| 4437 |
% \optitem[0.7\nxLcs{pslinewidth}]{gratinglinewidth}{\prm{num} or \prm{dimen}} |
| 4438 |
% \ifGERMAN \linewidthexplanation{des Gitters}{Gitter}\fi |
| 4439 |
% \ifENGLISH \linewidthexplanation{grating}{gratings}\fi |
| 4440 |
% \end{optionlist} |
| 4441 |
% |
| 4442 |
% \ifGERMAN\section{Transmissionsgitter}\fi |
| 4443 |
% \ifENGLISH\section{Transmission grating}\fi |
| 4444 |
% |
| 4445 |
% \begin{ltxsyntax} |
| 4446 |
% \tripoledesc{transmissiongrating} |
| 4447 |
% \iffalse |
| 4448 |
%<*ignore> |
| 4449 |
% \fi |
| 4450 |
\begin{LTXexample} |
| 4451 |
\begin{pspicture}(3,2) |
| 4452 |
\transmissiongrating[beam](0,1)(1.5,1)(3,0.5){TG} |
| 4453 |
\end{pspicture} |
| 4454 |
\end{LTXexample} |
| 4455 |
% \iffalse |
| 4456 |
%</ignore> |
| 4457 |
% \fi |
| 4458 |
% \end{ltxsyntax} |
| 4459 |
% |
| 4460 |
% \ifGERMAN |
| 4461 |
% Das Transmissiongitter unterstützt alle Optionen von |
| 4462 |
% \Lcomp{optgrating}. Der Strahlengang wird so berechnet, dass der |
| 4463 |
% Strahl an einer Ebene senkrecht zum dargestellten Gitter reflektiert |
| 4464 |
% wird. Diese Ebene ist im folgenden Beispiel dargestellt: |
| 4465 |
% \fi |
| 4466 |
% \ifENGLISH |
| 4467 |
% The transmission grating supports all options of |
| 4468 |
% \Lcomp{optgrating}. The beam path is calculated such, that the beam is |
| 4469 |
% reflected at an interface which is perpendicular to the drawn |
| 4470 |
% grating. This virtual interface is shown in the following example: |
| 4471 |
% \fi |
| 4472 |
% |
| 4473 |
% \hspace*{\fill}% |
| 4474 |
% \begin{pspicture}(3,3) |
| 4475 |
% \transmissiongrating[beam, label=0 . . relative](0,1)(1.5,1)(3,0.5){\psline[linewidth=0.7\pslinewidth, linestyle=dashed](0,-1)(0,1)} |
| 4476 |
% \ifENGLISH |
| 4477 |
% \rput[lB](0,2.4){\parbox{3cm}{virtual reflection interface}} |
| 4478 |
% \fi |
| 4479 |
% \ifGERMAN |
| 4480 |
% \rput[lB](0,2.4){\parbox{3cm}{Virtuelle \\ Reflexionsebene}} |
| 4481 |
% \fi |
| 4482 |
% \end{pspicture} |
| 4483 |
% \hspace*{\fill}% |
| 4484 |
% \begin{pspicture}(3.5,3) |
| 4485 |
% \pnodes(0,1.3){A}(2,1.3){B}(1,0.3){C} |
| 4486 |
% \optgrating[reverse, gratingcount=9](A)(B)(C) |
| 4487 |
% \optplane[angle=45](C) |
| 4488 |
% \addtopsstyle{Beam}{ArrowInside=->, ArrowInsidePos=0.8, arrowinset=0, arrowscale=1.5} |
| 4489 |
% \drawbeam[linecolor=black](A){1} |
| 4490 |
% \addtopsstyle{Beam}{loadbeam, savebeam=false} |
| 4491 |
% \drawbeam[linecolor=green]{1-2} |
| 4492 |
% \drawbeam[linecolor=red, beamangle=15]{1-2} |
| 4493 |
% \drawbeam[linecolor=blue, beamangle=-15]{1-2} |
| 4494 |
% \ifENGLISH |
| 4495 |
% \rput[lB](0,2.4){\parbox{5cm}{reflection grating\\\Lcomp{optgrating}}} |
| 4496 |
% \fi |
| 4497 |
% \ifGERMAN |
| 4498 |
% \rput[lB](0,2.4){\parbox{5cm}{Reflexionsgitter\\\Lcomp{optgrating}}} |
| 4499 |
% \fi |
| 4500 |
% \end{pspicture} |
| 4501 |
% \hspace*{\fill}% |
| 4502 |
% \begin{pspicture}(4,3) |
| 4503 |
% \pnodes(0,1.3){A}(2,1.3){B}(4,1){C} |
| 4504 |
% \transmissiongrating[reverse, gratingcount=9](A)(B)(C) |
| 4505 |
% \optplane[angle=-30](C) |
| 4506 |
% \addtopsstyle{Beam}{ArrowInside=->, ArrowInsidePos=0.8, arrowinset=0, arrowscale=1.5} |
| 4507 |
% \drawbeam[linecolor=black](A){1} |
| 4508 |
% \addtopsstyle{Beam}{loadbeam, savebeam=false} |
| 4509 |
% \drawbeam[linecolor=green]{1-2} |
| 4510 |
% \drawbeam[linecolor=red, beamangle=5]{1-2} |
| 4511 |
% \drawbeam[linecolor=blue, beamangle=-5]{1-2} |
| 4512 |
% \ifENGLISH |
| 4513 |
% \rput[lB](0,2.4){\parbox{5cm}{transmission grating\\\Lcomp{transmissiongrating}}} |
| 4514 |
% \fi |
| 4515 |
% \ifGERMAN |
| 4516 |
% \rput[lB](0,2.4){\parbox{5cm}{Transmissionsgitter\\\Lcomp{transmissiongrating}}} |
| 4517 |
% \fi |
| 4518 |
% \end{pspicture} |
| 4519 |
% \hspace*{\fill}% |
| 4520 |
% |
| 4521 |
% \ifENGLISH If this is not what you want, you may e.g. rotate the |
| 4522 |
% component further with \Lkeyword{angle}, and then adjust also the |
| 4523 |
% \Lkeyword{beamangle}. |
| 4524 |
% \fi |
| 4525 |
% \ifGERMAN Ist dieses Verhalten nicht gewünscht, so kann man z.B. die |
| 4526 |
% Komponente mit \Lkeyword{angle} weiter drehen, und den Strahlwinkel |
| 4527 |
% mit \Lkeyword{beamangle} entsprechend korrigieren. |
| 4528 |
% \fi |
| 4529 |
% |
| 4530 |
% \iffalse |
| 4531 |
%<*ignore> |
| 4532 |
% \fi |
| 4533 |
\begin{LTXexample} |
| 4534 |
\begin{pspicture}(3,1.4) |
| 4535 |
\pnodes(0,1){A}(1,1){B}(3,0.6){C} |
| 4536 |
\transmissiongrating[angle=-10, reverse](A)(B)(C){TG} |
| 4537 |
\addtopsstyle{Beam}{ArrowInside=->, ArrowInsidePos=0.8, arrowinset=0, arrowscale=1.5} |
| 4538 |
\drawbeam[linecolor=black](A){1} |
| 4539 |
\drawbeam[linecolor=green, loadbeam, beamangle=20]{1}(C) |
| 4540 |
\end{pspicture} |
| 4541 |
\end{LTXexample} |
| 4542 |
% \iffalse |
| 4543 |
%</ignore> |
| 4544 |
% \fi |
| 4545 |
% |
| 4546 |
% \ifGERMAN\section{Akustooptischer Modulator}\fi |
| 4547 |
% \ifENGLISH\section{Acousto-optic modulator}\fi |
| 4548 |
% |
| 4549 |
% \begin{ltxsyntax} |
| 4550 |
% \xLtripole{optaom}\compitem{optaom}[options](in)(trans)(diff){label} |
| 4551 |
% \end{ltxsyntax} |
| 4552 |
% \iffalse |
| 4553 |
%<*ignore> |
| 4554 |
% \fi |
| 4555 |
\begin{LTXexample}[linerange={1-3,7-7}] |
| 4556 |
\begin{pspicture}(3,2) |
| 4557 |
\pnodes(0,1.5){A}(3,0.5){B}(3,1.5){C} |
| 4558 |
\optaom[beam](A)(B)(C){AOM} |
| 4559 |
\psdots(A)(B)(C) |
| 4560 |
\color{Refline} |
| 4561 |
\uput[-90](A){A}\uput[-90](B){B}\uput[-90](C){C} |
| 4562 |
\end{pspicture} |
| 4563 |
\end{LTXexample} |
| 4564 |
% \iffalse |
| 4565 |
%</ignore> |
| 4566 |
% \fi |
| 4567 |
% |
| 4568 |
% \ifGERMAN |
| 4569 |
% Dieses Makro stellt einen akustooptischen Modulator dar. Dieser kann, |
| 4570 |
% ähnlich einem \Lcomp{beamsplitter} entweder transmittierend oder |
| 4571 |
% reflektierend sein. Beachten Sie, dass die Knoten nicht so angeordnet |
| 4572 |
% sind, wie bei den üblichen Tripolen wie z. B. dem |
| 4573 |
% \Lcomp{optgrating}. Der mittlere Knoten gibt die Richtung eines |
| 4574 |
% transmittierten, und der dritte Knoten die Richtung der ersten |
| 4575 |
% Beugungsordnung an. |
| 4576 |
% |
| 4577 |
% Diese erste Umsetzung des AOM in Version 4.8 ist |
| 4578 |
% noch etwas experimentell, da ich nicht genügend Testfälle hatte um |
| 4579 |
% alle Eventualitäten zu prüfen. Es könnten sich also noch Änderungen |
| 4580 |
% ergeben, die nicht abwärts kompatibel sind. |
| 4581 |
% \fi |
| 4582 |
% \ifENGLISH |
| 4583 |
% This macro draw an acousto-optic modulator, which either be |
| 4584 |
% transmittive or reflective, like a \Lcomp{beamsplitter}. Please note, |
| 4585 |
% that the nodes do not correspond to those of a usual tripole like an |
| 4586 |
% \Lcomp{optgrating}. The second node is in the direction of the |
| 4587 |
% transmitted beam, the third node gives the direction of the first |
| 4588 |
% diffraction order. |
| 4589 |
% |
| 4590 |
% This first implementation in version 4.8 is still experimental, |
| 4591 |
% because I didn't have enough test cases to check all possible |
| 4592 |
% cases. Therefore, future versions may have changes, which are not |
| 4593 |
% backwards compatible. |
| 4594 |
% \fi |
| 4595 |
% |
| 4596 |
% \begin{optionlist} |
| 4597 |
% \numitem[1]{aomheight} |
| 4598 |
% \ifGERMAN Die Höhe des Modulators.\fi |
| 4599 |
% \ifENGLISH The height of the modulator.\fi |
| 4600 |
% |
| 4601 |
% \numitem[1.5]{aomwidth} |
| 4602 |
% \ifGERMAN Die Breite des Modulators.\fi |
| 4603 |
% \ifENGLISH The width of the modulator.\fi |
| 4604 |
% |
| 4605 |
% \optitem{aomsize}{\prm{width} \prm{height}} |
| 4606 |
% \ifGERMAN Die Breite und Höhe des Modulators, äquivalent zum Aufruf von |
| 4607 |
% \Lkeyword{aomwidth} und \Lkeyword{aomheight}. |
| 4608 |
% \fi |
| 4609 |
% \ifENGLISH The width and height of the modulator, is equivalent to calling both |
| 4610 |
% \Lkeyword{aomwidth} and \Lkeyword{aomheight}. |
| 4611 |
% \fi |
| 4612 |
% |
| 4613 |
% \intitem[9]{aomgratingcount} |
| 4614 |
% \ifGERMAN |
| 4615 |
% Gibt die Anzahl der Gitterlinien an. Werden weitere Änderungen des |
| 4616 |
% Gitters oder des Modulators allgemein gewünscht, dann muss der Parameter |
| 4617 |
% \Lkeyword{aomcomp} verwendet werden. |
| 4618 |
% \fi |
| 4619 |
% \ifENGLISH |
| 4620 |
% Changes the number of grating lines. For other changes of the grating |
| 4621 |
% you must use the \Lkeyword{aomcomp} parameter to redefine the whole grating. |
| 4622 |
% \fi |
| 4623 |
% |
| 4624 |
% \choitem[symmetric]{aomalign}{symmetric, straight} |
| 4625 |
% \ifGERMAN |
| 4626 |
% Die Ausrichtung eines \Lcomp{optaom} bezüglich der drei Referenzknoten |
| 4627 |
% kann mit diesem Parameter eingestellt werden. Die symmetrische |
| 4628 |
% (\opt{symmetric}) Ausrichtung ist im folgenden Beispiel zu sehen: |
| 4629 |
% \fi |
| 4630 |
% \ifENGLISH |
| 4631 |
% The alignment of an \Lcomp{optaom} with respect to the three reference |
| 4632 |
% nodes can be set with this option. The \opt{symmetric} alignment is |
| 4633 |
% shown in the following example: |
| 4634 |
% \fi |
| 4635 |
% |
| 4636 |
% \iffalse |
| 4637 |
%<*ignore> |
| 4638 |
% \fi |
| 4639 |
\begin{LTXexample}[linerange={1-6,11-11}] |
| 4640 |
\begin{pspicture}(3,2) |
| 4641 |
\pnodes(0,1.5){A}(3,0.5){B}(3,1.5){C} |
| 4642 |
\optaom[aomalign=symmetric](A)(B)(C){symmetric} |
| 4643 |
\addtopsstyle{Beam}{fillstyle=solid, linestyle=none, beamwidth=0.1} |
| 4644 |
\drawwidebeam[fillcolor=red!50](A){}(C) |
| 4645 |
\drawwidebeam[fillcolor=red](A){}(B) |
| 4646 |
\color{Refline} |
| 4647 |
\psdot(A)\uput[-90](A){A} |
| 4648 |
\psdot(B)\uput[-90](B){B} |
| 4649 |
\psdot(C)\uput[90](C){C} |
| 4650 |
\end{pspicture} |
| 4651 |
\end{LTXexample} |
| 4652 |
% \iffalse |
| 4653 |
%</ignore> |
| 4654 |
% \fi |
| 4655 |
% |
| 4656 |
% \ifGERMAN |
| 4657 |
% In der geraden (\opt{straight}) Ausrichtung sieht der Strahlengang wie |
| 4658 |
% folgt aus: |
| 4659 |
% \fi |
| 4660 |
% \ifENGLISH |
| 4661 |
% For \opt{straight} alignment the sketch looks like |
| 4662 |
% \fi |
| 4663 |
% |
| 4664 |
% \iffalse |
| 4665 |
%<*ignore> |
| 4666 |
% \fi |
| 4667 |
\begin{LTXexample}[linerange={1-6,11-11}] |
| 4668 |
\begin{pspicture}(3,2) |
| 4669 |
\pnodes(0,1){A}(3,1){B}(3,1.5){C} |
| 4670 |
\optaom[aomalign=straight](A)(B)(C){straight} |
| 4671 |
\addtopsstyle{Beam}{fillstyle=solid, linestyle=none, beamwidth=0.1} |
| 4672 |
\drawwidebeam[fillcolor=red!50](A){}(C) |
| 4673 |
\drawwidebeam[fillcolor=red](A){}(B) |
| 4674 |
\color{Refline} |
| 4675 |
\psdot(A)\uput[-90](A){A} |
| 4676 |
\psdot(B)\uput[-90](B){B} |
| 4677 |
\psdot(C)\uput[90](C){C} |
| 4678 |
\end{pspicture} |
| 4679 |
\end{LTXexample} |
| 4680 |
% \iffalse |
| 4681 |
%</ignore> |
| 4682 |
% \fi |
| 4683 |
% |
| 4684 |
% \choitem[parallel]{aomreflalign}{perp, parallel} |
| 4685 |
% \ifGERMAN |
| 4686 |
% Die Ausrichtung der reflektiven Grenzfläche kann entweder |
| 4687 |
% \opt{parallel} oder senkrecht (\opt{perp}) zur Komponente |
| 4688 |
% liegen. Diese Option ist lediglich aus technischer Sicht notwendig, |
| 4689 |
% die Richtung des reflektierten Strahls wird dadurch nicht |
| 4690 |
% verändert. |
| 4691 |
% \fi |
| 4692 |
% \ifENGLISH |
| 4693 |
% The reflective interface can be oriented either \opt{parallel} or |
| 4694 |
% \opt{perp}endicular to the component. This option was necessary in |
| 4695 |
% first place for technical reasons, the direction of the reflected ray |
| 4696 |
% is not affected by this option. |
| 4697 |
% \fi |
| 4698 |
% |
| 4699 |
% \iffalse |
| 4700 |
%<*ignore> |
| 4701 |
% \fi |
| 4702 |
\begin{LTXexample}[linerange={1-5,10-10}] |
| 4703 |
\begin{pspicture}(3,2) |
| 4704 |
\pnodes(0,1.5){A}(3,0.5){B}(3,1.5){C} |
| 4705 |
\optaom[aomreflalign=parallel](A)(B)(C){parallel} |
| 4706 |
\addtopsstyle{Beam}{fillstyle=solid, linestyle=none, beamwidth=0.2} |
| 4707 |
\drawwidebeam[fillcolor=red!50](A){}(C) |
| 4708 |
\color{Refline} |
| 4709 |
\psdot(A)\uput[-90](A){A} |
| 4710 |
\psdot(B)\uput[-90](B){B} |
| 4711 |
\psdot(C)\uput[90](C){C} |
| 4712 |
\end{pspicture} |
| 4713 |
\end{LTXexample} |
| 4714 |
|
| 4715 |
\begin{LTXexample}[linerange={1-5,10-10}] |
| 4716 |
\begin{pspicture}(3,2) |
| 4717 |
\pnodes(0,1.5){A}(3,0.5){B}(3,1.5){C} |
| 4718 |
\optaom[aomreflalign=perp](A)(B)(C){perp} |
| 4719 |
\addtopsstyle{Beam}{fillstyle=solid, linestyle=none, beamwidth=0.2} |
| 4720 |
\drawwidebeam[fillcolor=red!50](A){}(C) |
| 4721 |
\color{Refline} |
| 4722 |
\psdot(A)\uput[-90](A){A} |
| 4723 |
\psdot(B)\uput[-90](B){B} |
| 4724 |
\psdot(C)\uput[90](C){C} |
| 4725 |
\end{pspicture} |
| 4726 |
\end{LTXexample} |
| 4727 |
% \iffalse |
| 4728 |
%</ignore> |
| 4729 |
% \fi |
| 4730 |
% |
| 4731 |
% \ifGERMAN |
| 4732 |
% Das folgende Beispiel zeigt einen Fall, der mit |
| 4733 |
% \Lkeyword{aomreflalign}\opt{=parallel} nicht funktioniert, da der |
| 4734 |
% Einfallswinkel so flach ist, dass die Schnittpunkte mit der |
| 4735 |
% reflektierenden Grenzfläche außerhalb der Komponente liegen: |
| 4736 |
% \fi |
| 4737 |
% \ifENGLISH |
| 4738 |
% The following example show a use case, which doesn't work properly |
| 4739 |
% with \Lkeyword{aomreflalign}\opt{=parallel}, because the incident |
| 4740 |
% angle is so shallow, that the intersection points with the interface |
| 4741 |
% lay outside of the component. |
| 4742 |
% \fi |
| 4743 |
% \iffalse |
| 4744 |
%<*ignore> |
| 4745 |
% \fi |
| 4746 |
\begin{LTXexample} |
| 4747 |
\begin{pspicture}(3,1.5) |
| 4748 |
\pnodes(0,1.1){A}(3,0.8){B}(3,1.1){C} |
| 4749 |
\optaom[aomreflalign=parallel](A)(B)(C){parallel} |
| 4750 |
\addtopsstyle{Beam}{fillstyle=solid, linestyle=none, beamwidth=0.2} |
| 4751 |
\drawwidebeam[fillcolor=red!50](A){}(C) |
| 4752 |
\end{pspicture} |
| 4753 |
\end{LTXexample} |
| 4754 |
% \iffalse |
| 4755 |
%</ignore> |
| 4756 |
% \fi |
| 4757 |
% |
| 4758 |
% \choitem[default]{aomcomp}{default, \prm{macro}} |
| 4759 |
% \ifGERMAN Tauscht die Gitterlinien durch eine beliebige Zeichung aus.\fi |
| 4760 |
% \ifENGLISH Changes the grating lines to an arbitrary drawing.\fi |
| 4761 |
% |
| 4762 |
% \intitem[2]{diffractionorders} |
| 4763 |
% \ifGERMAN |
| 4764 |
% Die Anzahl der Beugungsordnungen (positive und negative), die mit |
| 4765 |
% \Lkeyword{beamdiffractionorder} ausgewählt werden können, also |
| 4766 |
% $-$\prm{num},$-$\prm{num}$+1$,\ldots ,\prm{num}. |
| 4767 |
% |
| 4768 |
% Gleichzeitig werden entsprechende Knoten |
| 4769 |
% \lstinline!\oenode{DO-1}{<comp>}!, \lstinline!\oenode{DO0}{<comp>}!, |
| 4770 |
% \lstinline!\oenode{DO1}{<comp>}! usw. definiert. |
| 4771 |
% \fi |
| 4772 |
% \ifENGLISH |
| 4773 |
% The number or diffraction orders (positive and negative) which can be |
| 4774 |
% selected with \Lkeyword{beamdiffractionorder}, |
| 4775 |
% i.e. $-$\prm{num},$-$\prm{num}$+1$,\ldots ,\prm{num}. |
| 4776 |
% |
| 4777 |
% At the same time the nodes \lstinline!\oenode{DO-1}{<comp>}!, |
| 4778 |
% \lstinline!\oenode{DO0}{<comp>}!, \lstinline!\oenode{DO1}{<comp>}! |
| 4779 |
% etc. are defined. |
| 4780 |
% \fi |
| 4781 |
% |
| 4782 |
% \iffalse |
| 4783 |
%<*ignore> |
| 4784 |
% \fi |
| 4785 |
\begin{LTXexample} |
| 4786 |
\begin{pspicture}(0,0.6)(4.3,3.6) |
| 4787 |
\pnodes(0,2.5){A}(4,2){B}(4,2.5){C} |
| 4788 |
\optaom[aomsize=1 2, aomreflalign=perp, diffractionorders=3](A)(B)(C) |
| 4789 |
\addtopsstyle{Beam}{beamwidth=0.2, linestyle=none, fillstyle=solid} |
| 4790 |
\drawwidebeam[fillcolor=red!40](A){}(C) |
| 4791 |
\drawwidebeam[fillcolor=red](A){}(B) |
| 4792 |
\multido{\i=-3+1}{7}{% |
| 4793 |
\psdot(\oenode{DO\i}{})\uput[0](\oenode{DO\i}{}){\i}}% |
| 4794 |
\end{pspicture}% |
| 4795 |
\end{LTXexample} |
| 4796 |
% \iffalse |
| 4797 |
%</ignore> |
| 4798 |
% \fi |
| 4799 |
% |
| 4800 |
% \intitem[\{\}]{beamdiffractionorder} |
| 4801 |
% \ifGERMAN |
| 4802 |
% Die Beugungsordnung, die für einen reflektierten Strahl durch den AOM |
| 4803 |
% verwendet wird. Wenn der Wert leer ist, \opt{\{\}} dann wird die |
| 4804 |
% Option ignoriert. |
| 4805 |
% |
| 4806 |
% Mit Verwendung dieser Option wird unmittelbar das Verhalten der |
| 4807 |
% Grenzfläche festgelegt, hängt also nicht von der relativen Position |
| 4808 |
% von AOM und der folgenden Komponente ab. Für |
| 4809 |
% \Lkeyword{beamdiffractionorder}$\neq 0$ wird der Strahl reflektiert, |
| 4810 |
% für den Wert $0$ hingegen transmittiert. Der Parameter |
| 4811 |
% \Lkeyword{beammode} wird dann ignoriert. |
| 4812 |
% |
| 4813 |
% Es können nur die Beugungsordnungen verwendet werden, die für die |
| 4814 |
% entsprechende Komponente mit \Lkeyword{diffractionorders} definiert |
| 4815 |
% wurden. Wird eine nicht-definierte Ordnung verwendet, dann wird die |
| 4816 |
% nächstliegende verwendet und eine Postscript-Warnung (siehe |
| 4817 |
% \Lkeyword{pswarning}) ausgegeben. |
| 4818 |
% \fi |
| 4819 |
% \ifENGLISH |
| 4820 |
% The diffraction order, which is used for a reflected beam going |
| 4821 |
% through the aom. The option is ignored if its value is empty |
| 4822 |
% \opt{\{\}}. |
| 4823 |
% |
| 4824 |
% By using this option you automatically select the behaviour of the |
| 4825 |
% interface, which then doesn't depend on the relative position of AOM |
| 4826 |
% and the following component. For \Lkeyword{beamdiffractionorder}$\neq |
| 4827 |
% 0$ a beam gets reflected, for the value $0$ it gets transmitted. The |
| 4828 |
% parameter \Lkeyword{beammode} is ignored. |
| 4829 |
% |
| 4830 |
% You can select only those orders, where have been defined for the |
| 4831 |
% respective component with \Lkeyword{diffractionorders}. If an |
| 4832 |
% undefined order is selected, the closest one is choosen instead and a |
| 4833 |
% Postscript warning is issued (see \Lkeyword{pswarning}). |
| 4834 |
% \fi |
| 4835 |
% |
| 4836 |
% \iffalse |
| 4837 |
%<*ignore> |
| 4838 |
% \fi |
| 4839 |
\begin{LTXexample}[pos=t, linerange={1-7,12-12}] |
| 4840 |
\begin{pspicture}(0,-0.2)(4.4,3.8) |
| 4841 |
\pnodes(0,2.5){A}(4,2){B}(4,2.5){C} |
| 4842 |
\optaom[aomsize=1 2, aomreflalign=perp, diffractionorders=3](A)(B)(C) |
| 4843 |
\optplane(B) |
| 4844 |
\addtopsstyle{Beam}{beamwidth=0.2, linestyle=none, fillstyle=solid} |
| 4845 |
\multido{\i=-3+1,\r=10+15}{7}{% |
| 4846 |
\drawwidebeam[fillcolor=red!\r, beamdiffractionorder=\i](A){-}} |
| 4847 |
\color{Refline} |
| 4848 |
\uput[90](A){A}\psdot(A) |
| 4849 |
\uput[0](B){B}\psdot(B) |
| 4850 |
\uput[0](C){C}\psdot(C) |
| 4851 |
\end{pspicture}% |
| 4852 |
\end{LTXexample} |
| 4853 |
% \iffalse |
| 4854 |
%</ignore> |
| 4855 |
% \fi |
| 4856 |
% \end{optionlist} |
| 4857 |
% |
| 4858 |
% \ifGERMAN\section{Prisma}\fi |
| 4859 |
% \ifENGLISH\section{Prism}\fi |
| 4860 |
% |
| 4861 |
% \begin{ltxsyntax} |
| 4862 |
% \tripoledesc{optprism} |
| 4863 |
% \iffalse |
| 4864 |
%<*ignore> |
| 4865 |
% \fi |
| 4866 |
\begin{LTXexample} |
| 4867 |
\begin{pspicture}(3,2) |
| 4868 |
\optprism[beam](0,1)(2,1)(3,0){Prism} |
| 4869 |
\end{pspicture} |
| 4870 |
\end{LTXexample} |
| 4871 |
% \iffalse |
| 4872 |
%</ignore> |
| 4873 |
% \fi |
| 4874 |
% \end{ltxsyntax} |
| 4875 |
% \ifGERMAN |
| 4876 |
% Das Prisma wird immer symmetrisch bezüglich der \prm{in} und \prm{out} |
| 4877 |
% Knoten ausgerichtet. Für asymmetrischen Strahlengang siehe |
| 4878 |
% \prettyref{chap:connecting}. |
| 4879 |
% \fi |
| 4880 |
% \ifENGLISH |
| 4881 |
% The prism is always placed symmetric between \prm{in} and \prm{out} |
| 4882 |
% nodes. For asymmetric beam traces see \prettyref{chap:connecting}. |
| 4883 |
% \fi |
| 4884 |
% |
| 4885 |
% \begin{optionlist} |
| 4886 |
% \numitem[1]{prismsize} |
| 4887 |
% \ifGERMAN Die Höhe des Prismas.\fi |
| 4888 |
% \ifENGLISH The height of the prism.\fi |
| 4889 |
% |
| 4890 |
% \numitem[60]{prismangle} |
| 4891 |
% \ifGERMAN Der obere Winkel des Prismas.\fi |
| 4892 |
% \ifENGLISH The upper angle of the prism.\fi |
| 4893 |
% \iffalse |
| 4894 |
%<*ignore> |
| 4895 |
% \fi |
| 4896 |
\begin{LTXexample}[morekeywords={[21]prismangle}] |
| 4897 |
\begin{pspicture}(3,2) |
| 4898 |
\optprism[prismangle=30, beam](0,1)(2,1)(3,0){Prism} |
| 4899 |
\end{pspicture} |
| 4900 |
\end{LTXexample} |
| 4901 |
% \iffalse |
| 4902 |
%</ignore> |
| 4903 |
% \fi |
| 4904 |
% |
| 4905 |
% \choitem[transmittive]{prismtype}{transmittive, reflective} |
| 4906 |
% \ifGERMAN Ist dieser Parameter auf \opt{reflective} gesetzt, so wird |
| 4907 |
% die Grundfläche als zusätzliche, reflektierende Grenzfläche |
| 4908 |
% verwendet. |
| 4909 |
% \fi |
| 4910 |
% \ifENGLISH If this parameter is set to \opt{reflective}, the prism |
| 4911 |
% base is used as additional, reflective interface. |
| 4912 |
% \fi |
| 4913 |
% \iffalse |
| 4914 |
%<*ignore> |
| 4915 |
% \fi |
| 4916 |
\begin{LTXexample}[morekeywords={[21]prismtype}] |
| 4917 |
\begin{pspicture}(1.5,0.6)(5.1,2.2) |
| 4918 |
\optprism[prismtype=reflective](0,1)(3,0.9)(6,1) |
| 4919 |
\lens(1,2)(\oenodeIfc{2}{1}) |
| 4920 |
\lens(\oenodeIfc{2}{1})(5,2) |
| 4921 |
\drawwidebeam[beamwidth=0.3, fillstyle=solid, fillcolor=green, opacity=0.3](1,2){2}{1}{3}(5,2) |
| 4922 |
\end{pspicture} |
| 4923 |
\end{LTXexample} |
| 4924 |
% \iffalse |
| 4925 |
%</ignore> |
| 4926 |
% \fi |
| 4927 |
% |
| 4928 |
% \choitem[auto]{prismalign}{auto,center} |
| 4929 |
% \ifENGLISH Sets the vertical alignment of the prism with respect to the |
| 4930 |
% «reflection» node \prm{center}. For \opt{auto}, the prism is shifted such, |
| 4931 |
% that the interface nodes lay on the connection between the respective |
| 4932 |
% reference node and the «reflection» node. If the value is \opt{center}, the |
| 4933 |
% «reflection» node coincides with the component center. See the following |
| 4934 |
% examples for further explanation. |
| 4935 |
% \fi |
| 4936 |
% \ifGERMAN Wählt die vertikale Ausrichtung des Prisma bezüglich des |
| 4937 |
% «Reflektionsknoten» \prm{center}. Ist der Wert \opt{auto}, so wird das Prisma |
| 4938 |
% so verschoben, dass die Grenzflächenknoten auf der Verbindungslinie zwischen |
| 4939 |
% dem entsprechenden Referenzknoten und dem «Reflektionsknoten» liegen. Für |
| 4940 |
% \opt{center} fällt der «Reflektionsknoten» mit der Komponentenmitte |
| 4941 |
% zusammen. Siehe die folgende Beispiele zur weiteren Erklärung. |
| 4942 |
% \fi |
| 4943 |
% |
| 4944 |
% \iffalse |
| 4945 |
%<*ignore> |
| 4946 |
% \fi |
| 4947 |
\begin{pspicture}(0,-0.5)(14,3.2) |
| 4948 |
\footnotesize |
| 4949 |
\pnodes(0,1){A}(2,2){B}(4,1){C} |
| 4950 |
\psdot(A)\uput[90](A){A} |
| 4951 |
\psdot(B)\uput[90](B){B} |
| 4952 |
\psdot(C)\uput[90](C){C} |
| 4953 |
\optprism[prismsize=2](A)(B)(C) |
| 4954 |
\psline[style=Refline, linestyle=dashed](A)(B)(C) |
| 4955 |
\newpsstyle{IfcDot}{dotstyle=+, linecolor=red, linewidth=1.5\pslinewidth} |
| 4956 |
\psdot[style=IfcDot](\oenodeCenter{})\uput{0.1}[-90](\oenodeCenter{}){\prm{center}} |
| 4957 |
\psdot[style=IfcDot](\oenodeIn{})\uput{0.1}[150](\oenodeIn{}){\prm{in}} |
| 4958 |
\psdot[style=IfcDot](\oenodeOut{})\uput{0.1}[30](\oenodeOut{}){\prm{out}} |
| 4959 |
\rput[t](\oenodeCenter{}|0,0.2){% |
| 4960 |
\begin{tabular}{@{}c@{}}\opt{prismalign=auto}\\\opt{prismtype=transmittive}\end{tabular}} |
| 4961 |
|
| 4962 |
\pnodes(5,1){A}(7,2){B}(9,1){C} |
| 4963 |
\psdot(A)\uput[90](A){A} |
| 4964 |
\psdot(B)\uput[90](B){B} |
| 4965 |
\psdot(C)\uput[90](C){C} |
| 4966 |
\optprism[prismsize=2, prismalign=center](A)(B)(C) |
| 4967 |
\psline[style=Refline, linestyle=dashed](A)(B)(C) |
| 4968 |
\newpsstyle{IfcDot}{dotstyle=+, linecolor=red, linewidth=1.5\pslinewidth} |
| 4969 |
\psdot[style=IfcDot](\oenodeCenter{})\uput{0.1}[-90](\oenodeCenter{}){\prm{center}} |
| 4970 |
\psdot[style=IfcDot](\oenodeIn{})\uput{0.1}[150](\oenodeIn{}){\prm{in}} |
| 4971 |
\psdot[style=IfcDot](\oenodeOut{})\uput{0.1}[30](\oenodeOut{}){\prm{out}} |
| 4972 |
\rput[t](\oenodeCenter{}|0,0.2){% |
| 4973 |
\begin{tabular}{@{}c@{}}\opt{prismalign=center}\\\opt{prismtype=transmittive}\end{tabular}} |
| 4974 |
|
| 4975 |
\pnodes(10,2){A}(12,1){B}(14,2){C} |
| 4976 |
\psdot(A)\uput[90](A){A} |
| 4977 |
\psdot(B)\uput[-90](B){B} |
| 4978 |
\psdot(C)\uput[90](C){C} |
| 4979 |
\optprism[prismsize=2, prismtype=reflective](A)(B)(C) |
| 4980 |
\psline[style=Refline, linestyle=dashed](A)(B)(C) |
| 4981 |
\newpsstyle{IfcDot}{dotstyle=+, linecolor=red, linewidth=1.5\pslinewidth} |
| 4982 |
\psdot[style=IfcDot](\oenodeCenter{})\uput{0.1}[90](\oenodeCenter{}){\prm{center}} |
| 4983 |
\psdot[style=IfcDot](\oenodeIn{})\uput{0.1}[-160](\oenodeIn{}){\prm{in}} |
| 4984 |
\psdot[style=IfcDot](\oenodeOut{})\uput{0.1}[-20](\oenodeOut{}){\prm{out}} |
| 4985 |
\rput[t](\oenodeCenter{}|0,0.2){% |
| 4986 |
\begin{tabular}{@{}c@{}}\opt{prismalign=auto}\\\opt{prismtype=reflective}\end{tabular}} |
| 4987 |
\end{pspicture} |
| 4988 |
% \iffalse |
| 4989 |
%</ignore> |
| 4990 |
% \fi |
| 4991 |
% \end{optionlist} |
| 4992 |
% |
| 4993 |
% \ifGERMAN\section{Umkehrprisma}\fi |
| 4994 |
% \ifENGLISH\section{Right-angle prism}\fi |
| 4995 |
% |
| 4996 |
% \begin{ltxsyntax} |
| 4997 |
% \tripoledesc{rightangleprism} |
| 4998 |
% \iffalse |
| 4999 |
%<*ignore> |
| 5000 |
% \fi |
| 5001 |
\begin{LTXexample} |
| 5002 |
\begin{pspicture}(3,2) |
| 5003 |
\psdot(1.8,1) |
| 5004 |
\rightangleprism[beam](0,1.5)(1.8,1)(0,0.5){RA} |
| 5005 |
\end{pspicture} |
| 5006 |
\end{LTXexample} |
| 5007 |
% \iffalse |
| 5008 |
%</ignore> |
| 5009 |
% \fi |
| 5010 |
% \end{ltxsyntax} |
| 5011 |
% \ifGERMAN |
| 5012 |
% Das Umkehrprisma wird so ausgerichtet, dass der einfallende und der |
| 5013 |
% reflektierte Strahl parallel sind und der \prm{center} Knoten vertikal |
| 5014 |
% zentriert in dem Prisma liegt. |
| 5015 |
% \fi |
| 5016 |
% \ifENGLISH |
| 5017 |
% The right-angle prisms is align such that the incoming and reflected |
| 5018 |
% beam are parallel and the \prm{center} node is vertically centered in |
| 5019 |
% the prism. |
| 5020 |
% \fi |
| 5021 |
% \iffalse |
| 5022 |
%<*ignore> |
| 5023 |
% \fi |
| 5024 |
\begin{LTXexample} |
| 5025 |
\begin{pspicture}(3.5,2) |
| 5026 |
\pnodes(0,2){A}(2.5,0.5){G}(0,1.5){B} |
| 5027 |
\begin{optexp} |
| 5028 |
\rightangleprism[beam, showifcnodes, showoptdots](A)(G)(B){RA} |
| 5029 |
\end{optexp} |
| 5030 |
\end{pspicture} |
| 5031 |
\end{LTXexample} |
| 5032 |
% \iffalse |
| 5033 |
%</ignore> |
| 5034 |
% \fi |
| 5035 |
% |
| 5036 |
% \begin{optionlist} |
| 5037 |
% \numitem[1.5]{raprismsize} |
| 5038 |
% \ifGERMAN Die Länge der Eingangsfläche.\fi |
| 5039 |
% \ifENGLISH The length of the input plane.\fi |
| 5040 |
% |
| 5041 |
% \choitem[auto]{raprismalign}{auto, center} |
| 5042 |
% \ifGERMAN Schaltet die automatische Positionierung der Komponente |
| 5043 |
% vertikal zur Eingangsfläche ein oder aus: |
| 5044 |
% \fi |
| 5045 |
% \ifENGLISH Switch between automatic and fixed alignment of the |
| 5046 |
% component vertical to the entrance interface: |
| 5047 |
% \fi |
| 5048 |
% |
| 5049 |
% \begin{pspicture}(0,-0.5)(13,2) |
| 5050 |
% \pnodes(0,1.6){A}(0,0.4){B} |
| 5051 |
% \rightangleprism(A)(2,1)(B)\psdot(\oenodeCenter{}) |
| 5052 |
% \drawbeam(A){}(B) |
| 5053 |
% \pnodes(3,1.2){A}(3,0.8){B} |
| 5054 |
% \rightangleprism(A)(5,1)(B)\psdot(\oenodeCenter{}) |
| 5055 |
% \drawbeam(A){}(B) |
| 5056 |
% \rput[t](3,0){\opt{raprismalign=auto}} |
| 5057 |
% \psset{raprismalign=center} |
| 5058 |
% \pnodes(7,1.6){A}(7,0.4){B} |
| 5059 |
% \rightangleprism(A)(9,1)(B)\psdot(\oenodeCenter{}) |
| 5060 |
% \drawbeam(A){}(B) |
| 5061 |
% \pnodes(10,1.2){A}(10,0.8){B} |
| 5062 |
% \rightangleprism(A)(12,1)(B)\psdot(\oenodeCenter{}) |
| 5063 |
% \drawbeam(A){}(B) |
| 5064 |
% \rput[t](10,0){\opt{raprismalign=center}} |
| 5065 |
% \end{pspicture} |
| 5066 |
% |
| 5067 |
% \end{optionlist} |
| 5068 |
% |
| 5069 |
% \ifGERMAN\section{Pentaprisma}\fi |
| 5070 |
% \ifENGLISH\section{Penta prism}\fi |
| 5071 |
% |
| 5072 |
% \begin{ltxsyntax} |
| 5073 |
% \tripoledesc{pentaprism} |
| 5074 |
% \iffalse |
| 5075 |
%<*ignore> |
| 5076 |
% \fi |
| 5077 |
\begin{LTXexample} |
| 5078 |
\begin{pspicture}(3,2) |
| 5079 |
\pentaprism[beam](0,1)(2,1)(2,0){PP} |
| 5080 |
\end{pspicture} |
| 5081 |
\end{LTXexample} |
| 5082 |
% \iffalse |
| 5083 |
%</ignore> |
| 5084 |
% \fi |
| 5085 |
% \end{ltxsyntax} |
| 5086 |
% |
| 5087 |
% \begin{optionlist} |
| 5088 |
% \numitem[0.7]{pentaprismsize} |
| 5089 |
% \ifGERMAN Die Länge der Eingangs- und Ausgangsfläche.\fi |
| 5090 |
% \ifENGLISH The length of the input and output plane.\fi |
| 5091 |
% \end{optionlist} |
| 5092 |
% |
| 5093 |
% |
| 5094 |
% \ifGERMAN\chapter{Faserkomponenten}\fi |
| 5095 |
% \ifENGLISH\chapter{Fiber components}\fi |
| 5096 |
% \label{chap:fibercomp} |
| 5097 |
% |
| 5098 |
% \ifENGLISH This chapter describes all fiber components and their |
| 5099 |
% options. They differ from free-ray components in that they are |
| 5100 |
% connected by default with fibers to their reference nodes, and that |
| 5101 |
% they cannot be used for raytracing. Instead of automatic fiber |
| 5102 |
% connections the components can also be connected manually with fibers, |
| 5103 |
% see \prettyref{sec:drawfiber}. |
| 5104 |
% |
| 5105 |
% Most components require only two reference nodes and are handled like |
| 5106 |
% the free-ray dipoles. Some special components like couplers |
| 5107 |
% (\prettyref{sec:coupler}) and circulators |
| 5108 |
% (\prettyref{sec:optcirculator}) are treated differently. |
| 5109 |
% \fi |
| 5110 |
% \ifGERMAN In diesem Kapitel werden alle Faserkomponenten und deren |
| 5111 |
% Parameter beschrieben. Diese werden automatisch über Fasern mit ihren |
| 5112 |
% Referenzknoten verbunden und unterstützen kein Raytracing. Anstelle |
| 5113 |
% der automatischen Faserverbindungen können die Komponenten auch |
| 5114 |
% manuell mit Fasern verbunden werden, siehe \prettyref{sec:drawfiber}. |
| 5115 |
% |
| 5116 |
% Die meisten Komponenten benötigen nur zwei Referenzknoten und werden |
| 5117 |
% wie die Freistrahlzweipole behandelt. Manche spezielle Komponenten wie |
| 5118 |
% Koppler (\ref{sec:coupler}) und Zirkulatoren (\compref{optcirculator}) |
| 5119 |
% werden anders ausgerichtet. |
| 5120 |
% \fi |
| 5121 |
% |
| 5122 |
% \begin{optionlist} |
| 5123 |
% \boolitem{usefiberstyle} |
| 5124 |
% \ifGERMAN |
| 5125 |
% Bei manchen Komponenten (z.B. \Lcomp{optfilter} oder \Lcomp{optmzm}) |
| 5126 |
% kann es vorteilhaft sein interne Faserteile hervorzuheben. Mit |
| 5127 |
% diesem Parameter werden z.B. die durchlässigen Teile eines Filter |
| 5128 |
% angezeigt und mit dem \Lstyle{Fiber}-Stil gezeichnet. In der |
| 5129 |
% Dokumentation ist dieses Verhalten angeschaltet um die betroffenen |
| 5130 |
% Bereiche hervorzuheben. Hat Vorrang vor der Option |
| 5131 |
% \Lkeyword{usewirestyle}, sind beide Optionen gesetzt, dann wird eine |
| 5132 |
% Faser gezeichnet. |
| 5133 |
% \fi |
| 5134 |
% \ifENGLISH |
| 5135 |
% For some components (e.g. \Lcomp{optfilter} or \Lcomp{optmzm}) it |
| 5136 |
% can be nice to highlight some internals. For example, if this option |
| 5137 |
% is enabled the passing parts of the optical filter are drawn with |
| 5138 |
% the \Lstyle{Fiber} style. In the documentation this parameter is |
| 5139 |
% enabled to show the parts which are affected. Takes precedence over |
| 5140 |
% \Lkeyword{usewirestyle}. |
| 5141 |
% \fi |
| 5142 |
% \boolitem{usewirestyle} |
| 5143 |
% \ifGERMAN |
| 5144 |
% Kann verwendet werden, um interne Verbindungen als \Lstyle{Wire} |
| 5145 |
% darzustellen. Setzt \Lkeyword{usefiberstyle} auf \opt{false}, daher |
| 5146 |
% kann es sinnvoll sein, z.B. einen elektrischen Filter zu definieren: |
| 5147 |
% \fi |
| 5148 |
% \ifENGLISH |
| 5149 |
% Can be used to draw internal connections als \Lstyle{Wire}. Sets |
| 5150 |
% \Lkeyword{usefiberstyle} to \opt{false}, therefore it can be useful |
| 5151 |
% to define e.g. an electrical filter: |
| 5152 |
% \fi |
| 5153 |
% |
| 5154 |
% \iffalse |
| 5155 |
%<*ignore> |
| 5156 |
% \fi |
| 5157 |
\begin{lstlisting} |
| 5158 |
\newpsobject{elecfilter}{optfilter}{usewirestyle} |
| 5159 |
\end{lstlisting} |
| 5160 |
% \iffalse |
| 5161 |
%</ignore> |
| 5162 |
% \fi |
| 5163 |
% \end{optionlist} |
| 5164 |
% |
| 5165 |
% \ifGERMAN\section{Optische Faser}\fi |
| 5166 |
% \ifENGLISH\section{Optical fiber}\fi |
| 5167 |
% |
| 5168 |
% \begin{ltxsyntax} |
| 5169 |
% \fiberdipoledesc{optfiber} |
| 5170 |
% \iffalse |
| 5171 |
%<*ignore> |
| 5172 |
% \fi |
| 5173 |
\begin{LTXexample} |
| 5174 |
\begin{pspicture}(3,1.5) |
| 5175 |
\optfiber[label=0.3](0,0.5)(3,0.5){SSMF} |
| 5176 |
\end{pspicture} |
| 5177 |
\end{LTXexample} |
| 5178 |
% \iffalse |
| 5179 |
%</ignore> |
| 5180 |
% \fi |
| 5181 |
% \end{ltxsyntax} |
| 5182 |
% \begin{optionlist} |
| 5183 |
% \intitem[3]{fiberloops} |
| 5184 |
% \ifGERMAN Anzahl der Faserschleifen.\fi |
| 5185 |
% \ifENGLISH Number of the fiber loops.\fi |
| 5186 |
% \iffalse |
| 5187 |
%<*ignore> |
| 5188 |
% \fi |
| 5189 |
\begin{LTXexample}[morekeywords={[21]fiberloops}] |
| 5190 |
\begin{pspicture}(3,1.5) |
| 5191 |
\optfiber[fiberloops=2, label=0.3](0,0.5)(3,0.5){SSMF} |
| 5192 |
\end{pspicture} |
| 5193 |
\end{LTXexample} |
| 5194 |
% \iffalse |
| 5195 |
%</ignore> |
| 5196 |
% \fi |
| 5197 |
% |
| 5198 |
% \numitem[0.4]{fiberloopradius} |
| 5199 |
% \ifGERMAN Radius der Faserschleifen.\fi |
| 5200 |
% \ifENGLISH Radius of the fiber loops.\fi |
| 5201 |
% \iffalse |
| 5202 |
%<*ignore> |
| 5203 |
% \fi |
| 5204 |
\begin{LTXexample}[morekeywords={[21]fiberloopradius}] |
| 5205 |
\begin{pspicture}(3,1.5) |
| 5206 |
\optfiber[fiberloopradius=0.2, label=0.3](0,0.5)(3,0.5){SSMF} |
| 5207 |
\end{pspicture} |
| 5208 |
\end{LTXexample} |
| 5209 |
% \iffalse |
| 5210 |
%</ignore> |
| 5211 |
% \fi |
| 5212 |
% |
| 5213 |
% \numitem[0.2]{fiberloopsep} |
| 5214 |
% \ifGERMAN Abstand zwischen zwei aufeinanderfolgenden Faserschleifen.\fi |
| 5215 |
% \ifENGLISH Separation between two successive fiber loops.\fi |
| 5216 |
% \iffalse |
| 5217 |
%<*ignore> |
| 5218 |
% \fi |
| 5219 |
\begin{LTXexample}[morekeywords={[21]fiberloopsep}] |
| 5220 |
\begin{pspicture}(3,1.5) |
| 5221 |
\optfiber[fiberloopsep=0.6, label=0.3](0,0.5)(3,0.5){SSMF} |
| 5222 |
\end{pspicture} |
| 5223 |
\end{LTXexample} |
| 5224 |
% \iffalse |
| 5225 |
%</ignore> |
| 5226 |
% \fi |
| 5227 |
% \end{optionlist} |
| 5228 |
% |
| 5229 |
% \ifGERMAN\section{Optischer Verstärker}\fi |
| 5230 |
% \ifENGLISH\section{Optical amplifier}\fi |
| 5231 |
% |
| 5232 |
% \begin{ltxsyntax} |
| 5233 |
% \fiberdipoledesc{optamp} |
| 5234 |
% \iffalse |
| 5235 |
%<*ignore> |
| 5236 |
% \fi |
| 5237 |
\begin{LTXexample} |
| 5238 |
\begin{pspicture}(3,1.5) |
| 5239 |
\optamp(0,1)(3,1){EDFA} |
| 5240 |
\end{pspicture} |
| 5241 |
\end{LTXexample} |
| 5242 |
% \iffalse |
| 5243 |
%</ignore> |
| 5244 |
% \fi |
| 5245 |
% \end{ltxsyntax} |
| 5246 |
% |
| 5247 |
% \begin{optionlist} |
| 5248 |
% \optitem[0.8]{optampsize}{\prm{num} or \prm{width} \prm{height}} |
| 5249 |
% \ifGERMAN |
| 5250 |
% Eine einzelne Zahl gibt die Seitenlänge des Verstärkers an, zwei Zahlen die |
| 5251 |
% Breite und Höhe. Beachten Sie, dass \opt{optampsize=1} und \opt{optampsize=1 |
| 5252 |
% 1} nicht dasselbe Ergebnis liefern. Alternativ kann das Verhältnis zwischen |
| 5253 |
% Höhe und Breite mit \opt{xunit} und \opt{yunit} geändert werden. |
| 5254 |
% \fi |
| 5255 |
% \ifENGLISH |
| 5256 |
% A single number gives the side length of the amplifier, two numbers the width |
| 5257 |
% and height. Note, that \opt{optampsize=1} and \opt{optampsize=1 1} do not give |
| 5258 |
% the same result. You may also change the relation of width and height with |
| 5259 |
% \opt{xunit} and \opt{yunit}. |
| 5260 |
% \fi |
| 5261 |
% \end{optionlist} |
| 5262 |
% |
| 5263 |
% \ifGERMAN\section{Mach-Zehnder-Modulator}\fi |
| 5264 |
% \ifENGLISH\section{Mach--Zehnder modulator}\fi |
| 5265 |
% |
| 5266 |
% \begin{ltxsyntax} |
| 5267 |
% \fiberdipoledesc{optmzm} |
| 5268 |
% \iffalse |
| 5269 |
%<*ignore> |
| 5270 |
% \fi |
| 5271 |
\begin{LTXexample} |
| 5272 |
\begin{pspicture}(3,1.5) |
| 5273 |
\optmzm(0,1)(3,1){MZM} |
| 5274 |
\end{pspicture} |
| 5275 |
\end{LTXexample} |
| 5276 |
% \iffalse |
| 5277 |
%</ignore> |
| 5278 |
% \fi |
| 5279 |
% \end{ltxsyntax} |
| 5280 |
% |
| 5281 |
% \begin{optionlist} |
| 5282 |
% \optitem[0.8]{optmzmsize}{\prm{num} or \prm{width} \prm{height}} |
| 5283 |
% \ifGERMAN |
| 5284 |
% Eine einzelne Zahl gibt die Höhe des Modulators an, die Breite ist \opt{1.6} mal die |
| 5285 |
% Höhe. Zwei Zahlen geben Breite und Höhe des Modulators direkt an. |
| 5286 |
% \fi |
| 5287 |
% \ifENGLISH |
| 5288 |
% A single number gives the modulator height, the width is \opt{1.6} times the |
| 5289 |
% height. Two numbers define width and height directly. |
| 5290 |
% \fi |
| 5291 |
% \end{optionlist} |
| 5292 |
% |
| 5293 |
% \ifGERMAN\section{Polarisationssteller}\fi |
| 5294 |
% \ifENGLISH\section{Polarization controller}\fi |
| 5295 |
% |
| 5296 |
% \begin{ltxsyntax} |
| 5297 |
% \fiberdipoledesc{polcontrol} |
| 5298 |
% \iffalse |
| 5299 |
%<*ignore> |
| 5300 |
% \fi |
| 5301 |
\begin{LTXexample} |
| 5302 |
\begin{pspicture}(3,1.5) |
| 5303 |
\polcontrol(0,1)(3,1){PC} |
| 5304 |
\end{pspicture} |
| 5305 |
\end{LTXexample} |
| 5306 |
% \iffalse |
| 5307 |
%</ignore> |
| 5308 |
% \fi |
| 5309 |
% \end{ltxsyntax} |
| 5310 |
% |
| 5311 |
% \begin{optionlist} |
| 5312 |
% \numitem[0.15]{polcontrolsize} |
| 5313 |
% \ifGERMAN Der Radius der Polarisationssteller-Kreise.\fi |
| 5314 |
% \ifENGLISH The radius of the polarization controller circles.\fi |
| 5315 |
% |
| 5316 |
% \choitem[linear]{polcontroltype}{linear, triangle} |
| 5317 |
% \ifGERMAN Der Typ des Polarisationsstellers.\fi |
| 5318 |
% \ifENGLISH The type of polarization controller.\fi |
| 5319 |
% \iffalse |
| 5320 |
%<*ignore> |
| 5321 |
% \fi |
| 5322 |
\begin{LTXexample}[morekeywords={[21]polcontroltype}] |
| 5323 |
\begin{pspicture}(3,1.5) |
| 5324 |
\polcontrol[polcontroltype=triangle](0,1)(3,1){PC} |
| 5325 |
\end{pspicture} |
| 5326 |
\end{LTXexample} |
| 5327 |
% \iffalse |
| 5328 |
%</ignore> |
| 5329 |
% \fi |
| 5330 |
% \end{optionlist} |
| 5331 |
% |
| 5332 |
% \ifGERMAN\section{Isolator}\fi |
| 5333 |
% \ifENGLISH\section{Isolator}\fi |
| 5334 |
% |
| 5335 |
% \begin{ltxsyntax} |
| 5336 |
% \fiberdipoledesc{optisolator} |
| 5337 |
% \iffalse |
| 5338 |
%<*ignore> |
| 5339 |
% \fi |
| 5340 |
\begin{LTXexample} |
| 5341 |
\begin{pspicture}(3,1.5) |
| 5342 |
\optisolator(0,1)(3,1){isolator} |
| 5343 |
\end{pspicture} |
| 5344 |
\end{LTXexample} |
| 5345 |
% \iffalse |
| 5346 |
%</ignore> |
| 5347 |
% \fi |
| 5348 |
% \end{ltxsyntax} |
| 5349 |
% |
| 5350 |
% \begin{optionlist} |
| 5351 |
% \optitem[0.6]{isolatorsize}{\prm{num} or \prm{width} \prm{height}} |
| 5352 |
% \ifGERMAN |
| 5353 |
% Eine einzelne Zahl gibt die Höhe des Isolators an, die Breite ist \opt{1.6} mal die |
| 5354 |
% Höhe. Zwei Zahlen geben Breite und Höhe des Isolators direkt an. |
| 5355 |
% \fi |
| 5356 |
% \ifENGLISH |
| 5357 |
% A single number gives the isolator height, the width is \opt{1.6} times the |
| 5358 |
% height. Two numbers define width and height directly. |
| 5359 |
% \fi |
| 5360 |
% \end{optionlist} |
| 5361 |
% |
| 5362 |
% \begin{stylelist} |
| 5363 |
% \styleitem[linewidth=2\cs{pslinewidth}, arrowinset=0]{IsolatorArrow} |
| 5364 |
% \ifGERMAN |
| 5365 |
% Der Stil für den Isolatorpfeil. Das kann insbesondere nützlich sein um |
| 5366 |
% die Länge des Pfeils zu verändern. |
| 5367 |
% \fi |
| 5368 |
% \ifENGLISH |
| 5369 |
% The style of the isolator arrow. This can be especially useful to |
| 5370 |
% adapt the length of the arrow. |
| 5371 |
% \fi |
| 5372 |
% \iffalse |
| 5373 |
%<*ignore> |
| 5374 |
% \fi |
| 5375 |
\begin{LTXexample}[morekeywords={[21]IsolatorArrow}] |
| 5376 |
\begin{pspicture}(3,1.5) |
| 5377 |
\addtopsstyle{IsolatorArrow}{xunit=1.2} |
| 5378 |
\optisolator(0,1)(3,1){isolator} |
| 5379 |
\end{pspicture} |
| 5380 |
\end{LTXexample} |
| 5381 |
% \iffalse |
| 5382 |
%</ignore> |
| 5383 |
% \fi |
| 5384 |
% \end{stylelist} |
| 5385 |
% |
| 5386 |
% \ifGERMAN\section{Optischer Schalter}\fi |
| 5387 |
% \ifENGLISH\section{Optical switch}\fi |
| 5388 |
% |
| 5389 |
% \begin{ltxsyntax} |
| 5390 |
% \fiberdipoledesc{optswitch} |
| 5391 |
% \iffalse |
| 5392 |
%<*ignore> |
| 5393 |
% \fi |
| 5394 |
\begin{LTXexample} |
| 5395 |
\begin{pspicture}(3,1.5) |
| 5396 |
\optswitch(0,1)(3,1){opened switch} |
| 5397 |
\end{pspicture} |
| 5398 |
\end{LTXexample} |
| 5399 |
% \iffalse |
| 5400 |
%</ignore> |
| 5401 |
% \fi |
| 5402 |
% \end{ltxsyntax} |
| 5403 |
% |
| 5404 |
% \begin{optionlist} |
| 5405 |
% \optitem[0.8]{switchsize}{\prm{num} or \prm{width} \prm{height}} |
| 5406 |
% \ifGERMAN |
| 5407 |
% Wird nur eine Zahl angegeben, so ist das die Seitenlänge des |
| 5408 |
% Schalters, andernfalls können Breite und Höhe getrennt angegeben |
| 5409 |
% werden. |
| 5410 |
% \fi |
| 5411 |
% \ifENGLISH |
| 5412 |
% A single number defines the side length of the switch, otherwise the |
| 5413 |
% height and width can be specified separately. |
| 5414 |
% \fi |
| 5415 |
% |
| 5416 |
% \choitem[opened]{switchstyle}{opened, closed} |
| 5417 |
% \ifGERMAN Der Zustand des Schalters kann geschlossen (\opt{closed}) oder |
| 5418 |
% geöffnet (\opt{opened}) sein. |
| 5419 |
% \fi |
| 5420 |
% \ifENGLISH Indicate the switch as \opt{opened} or \opt{closed}.\fi |
| 5421 |
% \iffalse |
| 5422 |
%<*ignore> |
| 5423 |
% \fi |
| 5424 |
\begin{LTXexample}[morekeywords={[21]switchstyle}] |
| 5425 |
\begin{pspicture}(3,1.5) |
| 5426 |
\optswitch[switchstyle=closed](0,1)(3,1){closed switch} |
| 5427 |
\end{pspicture} |
| 5428 |
\end{LTXexample} |
| 5429 |
% \iffalse |
| 5430 |
%</ignore> |
| 5431 |
% \fi |
| 5432 |
% \end{optionlist} |
| 5433 |
% |
| 5434 |
% \ifGERMAN\section{Faserverzögerungstrecke}\fi |
| 5435 |
% \ifENGLISH\section{Fiber delay-line}\fi |
| 5436 |
% |
| 5437 |
% \begin{ltxsyntax} |
| 5438 |
% \fiberdipoledesc{fiberdelayline} |
| 5439 |
% \iffalse |
| 5440 |
%<*ignore> |
| 5441 |
% \fi |
| 5442 |
\begin{LTXexample} |
| 5443 |
\begin{pspicture}(3,1.5) |
| 5444 |
\fiberdelayline(0,1)(3,1){delay line} |
| 5445 |
\end{pspicture} |
| 5446 |
\end{LTXexample} |
| 5447 |
% \iffalse |
| 5448 |
%</ignore> |
| 5449 |
% \fi |
| 5450 |
% \end{ltxsyntax} |
| 5451 |
% |
| 5452 |
% \begin{optionlist} |
| 5453 |
% \optitem[0.6]{fdlsize}{\prm{num} or \prm{width} \prm{height}} |
| 5454 |
% \ifGERMAN |
| 5455 |
% Eine einzelne Zahl gibt die Höhe der Komponente an, die Breite ist \opt{1.6} |
| 5456 |
% mal die Höhe. Zwei Zahlen geben Breite und Höhe der Komponente direkt an. |
| 5457 |
% \fi |
| 5458 |
% \ifENGLISH |
| 5459 |
% A single number gives the component height, the width is \opt{1.6} times the |
| 5460 |
% height. Two numbers define width and height directly. |
| 5461 |
% \fi |
| 5462 |
% \end{optionlist} |
| 5463 |
% |
| 5464 |
% \begin{stylelist} |
| 5465 |
% \styleitem[arrowinset=0, arrows=->]{FdlArrow} |
| 5466 |
% \ifGERMAN |
| 5467 |
% Siehe \Lstyle{ArrowCompStyle}. |
| 5468 |
% \fi |
| 5469 |
% \ifENGLISH |
| 5470 |
% See \Lstyle{ArrowCompStyle}. |
| 5471 |
% \fi |
| 5472 |
% \end{stylelist} |
| 5473 |
% |
| 5474 |
% \ifGERMAN\section{Polarisator}\fi |
| 5475 |
% \ifENGLISH\section{Polarizer}\fi |
| 5476 |
% |
| 5477 |
% \begin{ltxsyntax} |
| 5478 |
% \fiberdipoledesc{optfiberpolarizer} |
| 5479 |
% \iffalse |
| 5480 |
%<*ignore> |
| 5481 |
% \fi |
| 5482 |
\begin{LTXexample} |
| 5483 |
\begin{pspicture}(3,1.5) |
| 5484 |
\optfiberpolarizer(0,1)(3,1){polarizer} |
| 5485 |
\end{pspicture} |
| 5486 |
\end{LTXexample} |
| 5487 |
% \iffalse |
| 5488 |
%</ignore> |
| 5489 |
% \fi |
| 5490 |
% \end{ltxsyntax} |
| 5491 |
% |
| 5492 |
% \begin{optionlist} |
| 5493 |
% \optitem[0.6]{fiberpolsize}{\prm{num} or \prm{width} \prm{height}} |
| 5494 |
% \ifGERMAN |
| 5495 |
% Eine einzelne Zahl gibt die Höhe der Komponente an, die Breite ist \opt{1.6} |
| 5496 |
% mal die Höhe. Zwei Zahlen geben Breite und Höhe der Komponente direkt an. |
| 5497 |
% \fi |
| 5498 |
% \ifENGLISH |
| 5499 |
% A single number gives the component height, the width is \opt{1.6} times the |
| 5500 |
% height. Two numbers define width and height directly. |
| 5501 |
% \fi |
| 5502 |
% \end{optionlist} |
| 5503 |
% |
| 5504 |
% |
| 5505 |
% \ifGERMAN\section{Optischer Zirkulator}\fi |
| 5506 |
% \ifENGLISH\section{Optical circulator}\fi |
| 5507 |
% |
| 5508 |
% \label{sec:optcirculator} |
| 5509 |
% \begin{ltxsyntax} |
| 5510 |
% \xLfmultipole{optcirculator}% |
| 5511 |
% \compitem{optcirculator}(left)(right)(bottom){label}% |
| 5512 |
% \iffalse |
| 5513 |
%<*ignore> |
| 5514 |
% \fi |
| 5515 |
\begin{LTXexample} |
| 5516 |
\begin{pspicture}(3,2) |
| 5517 |
\addtopsstyle{Fiber}{arrows=->} |
| 5518 |
\addtopsstyle{FiberOut1}{linecolor=blue} |
| 5519 |
\addtopsstyle{FiberOut2}{linecolor=green!80!black} |
| 5520 |
\optcirculator(0,1)(3,1)(1.5,0){Circulator} |
| 5521 |
\end{pspicture} |
| 5522 |
\end{LTXexample} |
| 5523 |
% \iffalse |
| 5524 |
%</ignore> |
| 5525 |
% \fi |
| 5526 |
% \end{ltxsyntax} |
| 5527 |
% \begin{optionlist} |
| 5528 |
% \numitem[0.8]{optcircsize} |
| 5529 |
% \ifGERMAN Der Durchmesser des Zirkulators.\fi |
| 5530 |
% \ifENGLISH The diameter of the circulator.\fi |
| 5531 |
% |
| 5532 |
% \numitem[-160]{optcircangleA} |
| 5533 |
% \ifGERMAN Der Startwinkel des internen Pfeils.\fi |
| 5534 |
% \ifENGLISH The starting angle of the internal arrow.\fi |
| 5535 |
% |
| 5536 |
% \numitem[-20]{optcircangleB} |
| 5537 |
% \ifGERMAN Der Endwinkel des internen Pfeils.\fi |
| 5538 |
% \ifENGLISH The ending angle of the internal arrow.\fi |
| 5539 |
% |
| 5540 |
% \optitem{optcircangle}{\prm{num} \prm{num}} |
| 5541 |
% \ifGERMAN Kurzschreibweise um beide Winkel gleichzeitig zu setzen.\fi |
| 5542 |
% \ifENGLISH Short notation to specifying both angles.\fi |
| 5543 |
% \iffalse |
| 5544 |
%<*ignore> |
| 5545 |
% \fi |
| 5546 |
\begin{LTXexample}[morekeywords={[21]optcircangle}] |
| 5547 |
\begin{pspicture}(3,1.5) |
| 5548 |
\optcirculator[optcircangle=0 -90](0,1)(3,1)(1.5,0) |
| 5549 |
\end{pspicture} |
| 5550 |
\end{LTXexample} |
| 5551 |
% \iffalse |
| 5552 |
%</ignore> |
| 5553 |
% \fi |
| 5554 |
% \end{optionlist} |
| 5555 |
% |
| 5556 |
% \begin{stylelist} |
| 5557 |
% \styleitem[unit=0.7, arrows=->, arrowinset=0]{OptCircArrow} |
| 5558 |
% \ifGERMAN |
| 5559 |
% Der Stil für den internen Pfeil. Damit wird sowohl die Richtung des Pfeils als |
| 5560 |
% auch die Größe des Bogens bestimmt. |
| 5561 |
% \fi |
| 5562 |
% \ifENGLISH The style of the internal arrow. It specifies the direction of the |
| 5563 |
% arrow and the size of the arc. |
| 5564 |
% \fi |
| 5565 |
% \iffalse |
| 5566 |
%<*ignore> |
| 5567 |
% \fi |
| 5568 |
\begin{LTXexample}[morekeywords={[21]{optcircangle, OptCircArrow}}] |
| 5569 |
\begin{pspicture}(3,1.5) |
| 5570 |
\newpsstyle{OptCircArrow}{unit=0.5, arrows=<-, arrowinset=0} |
| 5571 |
\optcirculator[optcircangle=0 -90](0,1)(3,1)(1.5,0) |
| 5572 |
\end{pspicture} |
| 5573 |
\end{LTXexample} |
| 5574 |
% \iffalse |
| 5575 |
%</ignore> |
| 5576 |
% \fi |
| 5577 |
% \end{stylelist} |
| 5578 |
% |
| 5579 |
% \ifENGLISH |
| 5580 |
% The circulator is positioned by default such that the input and output fibers |
| 5581 |
% are orthogonal to each other, like shown in the example: |
| 5582 |
% \fi |
| 5583 |
% \ifGERMAN |
| 5584 |
% Der Zirkulator wird so positioniert, dass Eingangs- und Ausgangsverbindung |
| 5585 |
% senkrecht zueinander stehen, wie das folgende Beispiel verdeutlicht: |
| 5586 |
% \fi |
| 5587 |
% \iffalse |
| 5588 |
%<*ignore> |
| 5589 |
% \fi |
| 5590 |
\begin{LTXexample} |
| 5591 |
\begin{pspicture}(3,2) |
| 5592 |
\addtopsstyle{Fiber}{arrowscale=1.3, arrows=->, arrowinset=0} |
| 5593 |
\optcirculator(0,0.5)(3,2)(1.5,0) |
| 5594 |
\end{pspicture} |
| 5595 |
\end{LTXexample} |
| 5596 |
% \iffalse |
| 5597 |
%</ignore> |
| 5598 |
% \fi |
| 5599 |
% |
| 5600 |
% \ifENGLISH The positioning parameters (\prettyref{sec:positioning}) refer to |
| 5601 |
% the reference nodes \prm{left} and \prm{right} as usual and are not related |
| 5602 |
% to the automatic position. This implies, that the default position is not |
| 5603 |
% equivalent to \Lkeyword{position}\opt{=0.5}. |
| 5604 |
% \fi |
| 5605 |
% \ifGERMAN Die Positionierungsparameter (\prettyref{sec:positioning}) beziehen |
| 5606 |
% sich wie üblich auf die Referenzknoten \prm{left} und \prm{right}, und nicht |
| 5607 |
% auf die automatisch bestimmte Position. Das bedeutet auch, dass die |
| 5608 |
% automatische Position i.a. nicht mit \Lkeyword{position}\opt{=0.5} |
| 5609 |
% übereinstimmt. |
| 5610 |
% \fi |
| 5611 |
% \iffalse |
| 5612 |
%<*ignore> |
| 5613 |
% \fi |
| 5614 |
\begin{LTXexample} |
| 5615 |
\begin{pspicture}(3,2) |
| 5616 |
\addtopsstyle{Fiber}{arrowscale=1.3, arrows=->, arrowinset=0, ncurv=1.5} |
| 5617 |
\optcirculator[position=0.5](0,0.5)(3,2)(1.5,0) |
| 5618 |
\end{pspicture} |
| 5619 |
\end{LTXexample} |
| 5620 |
% \iffalse |
| 5621 |
%</ignore> |
| 5622 |
% \fi |
| 5623 |
% |
| 5624 |
% \ifGERMAN\section{Faserkoppler}\fi |
| 5625 |
% \ifENGLISH\section{Fiber coupler}\fi |
| 5626 |
% \label{sec:coupler} |
| 5627 |
% |
| 5628 |
% \ifGERMAN Es stehen drei Faserkoppler zur Verfügung, die alle die gleichen |
| 5629 |
% Formen und Parameter verwenden. |
| 5630 |
% \fi |
| 5631 |
% \ifENGLISH The package provides three fiber couplers which all share the same |
| 5632 |
% shapes and parameters. |
| 5633 |
% \fi |
| 5634 |
% \begin{ltxsyntax} |
| 5635 |
% \xLfmultipole{optcoupler}% |
| 5636 |
% \compitem{optcoupler}(tl)(bl)(tr)(br){label} |
| 5637 |
% \iffalse |
| 5638 |
%<*ignore> |
| 5639 |
% \fi |
| 5640 |
\begin{LTXexample} |
| 5641 |
\begin{pspicture}(0,-0.4)(3,1) |
| 5642 |
\optcoupler(0,1)(0,0)(3,1)(3,0){optcoupler} |
| 5643 |
\end{pspicture} |
| 5644 |
\end{LTXexample} |
| 5645 |
% \iffalse |
| 5646 |
%</ignore> |
| 5647 |
% \fi |
| 5648 |
% |
| 5649 |
% \xLfmultipole{wdmcoupler}% |
| 5650 |
% \compitem{wdmcoupler}(tl)(...)(bl)(r){label} |
| 5651 |
% \iffalse |
| 5652 |
%<*ignore> |
| 5653 |
% \fi |
| 5654 |
\begin{LTXexample} |
| 5655 |
\begin{pspicture}(0,-0.4)(3,1) |
| 5656 |
\wdmcoupler(0,1)(0,0)(3,0.5){wdmcoupler} |
| 5657 |
\end{pspicture} |
| 5658 |
\end{LTXexample} |
| 5659 |
% \iffalse |
| 5660 |
%</ignore> |
| 5661 |
% \fi |
| 5662 |
% |
| 5663 |
% \xLfmultipole{wdmsplitter}% |
| 5664 |
% \compitem{wdmsplitter}(l)(tr)(...)(br){label} |
| 5665 |
% \iffalse |
| 5666 |
%<*ignore> |
| 5667 |
% \fi |
| 5668 |
\begin{LTXexample} |
| 5669 |
\begin{pspicture}(0,-0.4)(3,1) |
| 5670 |
\wdmsplitter(0,0.5)(3,1)(3,0){wdmsplitter} |
| 5671 |
\end{pspicture} |
| 5672 |
\end{LTXexample} |
| 5673 |
% \iffalse |
| 5674 |
%</ignore> |
| 5675 |
% \fi |
| 5676 |
% \end{ltxsyntax} |
| 5677 |
% \begin{optionlist} |
| 5678 |
% \optitem[0.2]{couplersize}{\prm{num} or \prm{width} \prm{height}} |
| 5679 |
% \ifGERMAN |
| 5680 |
% Wird eine Zahl angegeben, so ist die Breite des Kopplers doppelt so groß, die |
| 5681 |
% Höhe entspricht \opt{0.8} mal dem Wert. Mit zwei Zahlen werden Breite und Höhe |
| 5682 |
% direkt angegeben. |
| 5683 |
% \fi |
| 5684 |
% \ifENGLISH |
| 5685 |
% For a single number the width is twice this value, the height \opt{0.8} times |
| 5686 |
% this value. Two numbers define width and height directly. |
| 5687 |
% \fi |
| 5688 |
% |
| 5689 |
% \numitem[0.05]{couplersep} |
| 5690 |
% \ifGERMAN Der vertikale Abstand zwischen zwei Faserports.\fi |
| 5691 |
% \ifENGLISH The vertical distance between two fiber ports.\fi |
| 5692 |
% \iffalse |
| 5693 |
%<*ignore> |
| 5694 |
% \fi |
| 5695 |
\begin{LTXexample}[morekeywords={[21]{couplersep}}] |
| 5696 |
\begin{pspicture}(0,-0.5)(3,1) |
| 5697 |
\optcoupler[couplersep=0](0,1)(0,0)(3,1)(3,0){coupler} |
| 5698 |
\end{pspicture} |
| 5699 |
\end{LTXexample} |
| 5700 |
% \iffalse |
| 5701 |
%</ignore> |
| 5702 |
% \fi |
| 5703 |
% |
| 5704 |
% \ifENGLISH If this value is set to \{\}, the separation is calculated |
| 5705 |
% automatically according to the \Lkeyword{couplertype} and |
| 5706 |
% \Lkeyword{couplersize}. |
| 5707 |
% \fi |
| 5708 |
% \ifGERMAN Wird dieser Wert auf \{\} gesetzt, dann wird der Abstand |
| 5709 |
% automatisch berechnet, abhängig von \Lkeyword{couplertype} und |
| 5710 |
% \Lkeyword{couplersize}. |
| 5711 |
% \fi |
| 5712 |
% \iffalse |
| 5713 |
%<*ignore> |
| 5714 |
% \fi |
| 5715 |
\begin{LTXexample}[morekeywords={[21]{couplersep}}] |
| 5716 |
\begin{pspicture}(3,4.5) |
| 5717 |
\psset{couplersep={}, couplersize=0.5, labeloffset=0.5} |
| 5718 |
\optcoupler[couplertype=none]% |
| 5719 |
(0,4.5)(0,3.5)(3,4.5)(3,3.5){none} |
| 5720 |
\optcoupler[couplertype=rectangle]% |
| 5721 |
(0,3)(0,2)(3,3)(3,2){rectangle} |
| 5722 |
\optcoupler[couplertype=ellipse]% |
| 5723 |
(0,1.5)(0,0.5)(3,1.5)(3,0.5){ellipse} |
| 5724 |
\end{pspicture} |
| 5725 |
\end{LTXexample} |
| 5726 |
% \iffalse |
| 5727 |
%</ignore> |
| 5728 |
% \fi |
| 5729 |
% \choitem[ellipse]{couplertype}{none, ellipse, rectangle, cross} |
| 5730 |
% \ifGERMAN Wählt zwischen unterschiedlichen Kopplertypen.\fi |
| 5731 |
% \ifENGLISH Select between different coupler types.\fi |
| 5732 |
% \iffalse |
| 5733 |
%<*ignore> |
| 5734 |
% \fi |
| 5735 |
\begin{LTXexample}[morekeywords={[21]{couplertype}}] |
| 5736 |
\begin{pspicture}(3,4.5) |
| 5737 |
\psset{labeloffset=0.5} |
| 5738 |
\optcoupler[couplertype=none]% |
| 5739 |
(0,4.5)(0,3.5)(3,4.5)(3,3.5){none} |
| 5740 |
\optcoupler[couplertype=rectangle]% |
| 5741 |
(0,3)(0,2)(3,3)(3,2){rectangle} |
| 5742 |
\optcoupler[couplertype=cross]% |
| 5743 |
(0,1.5)(0,0.5)(3,1.5)(3,0.5){cross} |
| 5744 |
\end{pspicture} |
| 5745 |
\end{LTXexample} |
| 5746 |
% \iffalse |
| 5747 |
%</ignore> |
| 5748 |
% \fi |
| 5749 |
% |
| 5750 |
% \choitem[center]{coupleralign}{t, top, b, bottom, c, center} |
| 5751 |
% \ifGERMAN Die Ausrichtung des Kopplers bezüglich der |
| 5752 |
% Referenzknoten. Beachten Sie, dass die Position der Komponentenmitte |
| 5753 |
% und damit der Beschriftung von dieser Einstellung abhängt (siehe |
| 5754 |
% \ref{sec:centernode}). |
| 5755 |
% \fi |
| 5756 |
% \ifENGLISH The alignment of the coupler with respect to the reference |
| 5757 |
% nodes. Note, that the exact position of the coupler center and |
| 5758 |
% accordingly that of the label depends on this setting (see |
| 5759 |
% \ref{sec:centernode}). |
| 5760 |
% \fi |
| 5761 |
% \iffalse |
| 5762 |
%<*ignore> |
| 5763 |
% \fi |
| 5764 |
\begin{LTXexample}[morekeywords={[21]{coupleralign}}] |
| 5765 |
\begin{pspicture}(3,3) |
| 5766 |
\psset{labeloffset=0.4} |
| 5767 |
\optcoupler[coupleralign=top]% |
| 5768 |
(0,3)(0,2)(3,3)(3,2){top} |
| 5769 |
\optcoupler[coupleralign=bottom]% |
| 5770 |
(0,1.5)(0,0.5)(3,1.5)(3,0.5){bottom} |
| 5771 |
\end{pspicture} |
| 5772 |
\end{LTXexample} |
| 5773 |
% \iffalse |
| 5774 |
%</ignore> |
| 5775 |
% \fi |
| 5776 |
% |
| 5777 |
% \boolitem*[true]{variable} |
| 5778 |
% \iffalse |
| 5779 |
%<*ignore> |
| 5780 |
% \fi |
| 5781 |
\begin{LTXexample}[morekeywords={[21]{variable}}] |
| 5782 |
\begin{pspicture}(3,1) |
| 5783 |
\optcoupler[variable](0,1)(0,0)(3,1)(3,0) |
| 5784 |
\end{pspicture} |
| 5785 |
\end{LTXexample} |
| 5786 |
% \iffalse |
| 5787 |
%</ignore> |
| 5788 |
% \fi |
| 5789 |
% \end{optionlist} |
| 5790 |
% |
| 5791 |
% \begin{stylelist} |
| 5792 |
% \styleitem[arrowinset=0, arrows=->]{VariableCoupler} |
| 5793 |
% \ifGERMAN |
| 5794 |
% Der Stil des Pfeiles des verstellbaren Kopplers. |
| 5795 |
% \fi |
| 5796 |
% \ifENGLISH |
| 5797 |
% The style of the arrow of the variable coupler. |
| 5798 |
% \fi |
| 5799 |
% \end{stylelist} |
| 5800 |
% |
| 5801 |
% \ifGERMAN\subsection{Variable Knotenanzahl}\fi |
| 5802 |
% \ifENGLISH\subsection{Variable node count}\fi |
| 5803 |
% \ifGERMAN |
| 5804 |
% Jeder Koppler hat eine Variante, die nur zwei Knoten benötigt, einen Eingangs- |
| 5805 |
% und einen Ausgangsknoten. \Lcomp{optcoupler} verwendet jeden dieser Knoten |
| 5806 |
% zweimal, \Lcomp{wdmsplitter} verwendet den Knoten \prm{out} zweimal und |
| 5807 |
% \Lcomp{wdmcoupler} verwendet \prm{in} zweimal. Das kann sehr praktisch sein, |
| 5808 |
% wenn man für einen Koppler die automatischen Verbindungen nicht verwendet, |
| 5809 |
% sondern die Komponente manuell verbindet. |
| 5810 |
% \fi |
| 5811 |
% \ifENGLISH |
| 5812 |
% Every coupler has a variant which needs only two nodes, one input and one |
| 5813 |
% output node. For \Lcomp{optcoupler}, both nodes are used twice, |
| 5814 |
% \Lcomp{wdmsplitter} uses node \prm{out} twice, and \Lcomp{wdmcoupler} uses node |
| 5815 |
% \prm{in} twice. This can be very useful if you do not use the automatic |
| 5816 |
% connections but connect the components manually. |
| 5817 |
% \fi |
| 5818 |
% |
| 5819 |
% \iffalse |
| 5820 |
%<*ignore> |
| 5821 |
% \fi |
| 5822 |
\begin{LTXexample} |
| 5823 |
\begin{pspicture}(4,2) |
| 5824 |
\pnodes(0,1){A}(4,1){B} |
| 5825 |
\psset[optexp]{fiber=none} |
| 5826 |
\wdmsplitter[position=0.2, coupleralign=b](A)(B) |
| 5827 |
\wdmcoupler[position=0.8, coupleralign=t](A)(B) |
| 5828 |
\drawfiber{(A)}{1}{2}{(B)} |
| 5829 |
\drawfiber{1}{([offset=0.5, Xnodesep=1]\oenodeIfc{2}{1})} |
| 5830 |
\drawfiber{([offset=-0.5, Xnodesep=-1]\oenodeIfc{2}{2})}{2} |
| 5831 |
\end{pspicture} |
| 5832 |
\end{LTXexample} |
| 5833 |
% \iffalse |
| 5834 |
%</ignore> |
| 5835 |
% \fi |
| 5836 |
% |
| 5837 |
% \ifGERMAN Des Weiteren kann ein \Lcomp{wdmcoupler} mehr als zwei Eingangsknoten haben, ein |
| 5838 |
% \Lcomp{wdmsplitter} mehr als zwei Ausgangsknoten.\fi |
| 5839 |
% \ifENGLISH A \Lcomp{wdmcoupler} can have more than two input nodes, a \Lcomp{wdmsplitter} |
| 5840 |
% more than two output nodes.\fi |
| 5841 |
% \iffalse |
| 5842 |
%<*ignore> |
| 5843 |
% \fi |
| 5844 |
\begin{LTXexample} |
| 5845 |
\begin{pspicture}(4,2) |
| 5846 |
\pnodes(0,2){A}(0,1.2){B}(0,0.8){C}(0,0){D}(4,1){E} |
| 5847 |
\wdmcoupler(A)(B)(C)(D)(E){coupler} |
| 5848 |
\end{pspicture} |
| 5849 |
\end{LTXexample} |
| 5850 |
% \iffalse |
| 5851 |
%</ignore> |
| 5852 |
% \fi |
| 5853 |
% \iffalse |
| 5854 |
%<*ignore> |
| 5855 |
% \fi |
| 5856 |
\begin{LTXexample} |
| 5857 |
\begin{pspicture}(4,2) |
| 5858 |
\pnodes(0,1){A}(4,2){B}(4,1.2){C}(4,0.8){D}(4,0){E} |
| 5859 |
\wdmsplitter(A)(B)(C)(D)(E){splitter} |
| 5860 |
\end{pspicture} |
| 5861 |
\end{LTXexample} |
| 5862 |
% \iffalse |
| 5863 |
%</ignore> |
| 5864 |
% \fi |
| 5865 |
% |
| 5866 |
% \ifGERMAN Die Ausrichtung der Komponente wird anhand des Mittelpunkts aller Eingangs- |
| 5867 |
% (\Lcomp{wdmcoupler}) bzw. Ausgangsknoten (\Lcomp{wdmsplitter}) |
| 5868 |
% berechnet, falls nicht \Lkeyword{coupleralign} verwendet wird.\fi |
| 5869 |
% \ifENGLISH The component's orientation is calculated from the median of all input nodes |
| 5870 |
% (\Lcomp{wdmcoupler}) or all output nodes (\Lcomp{wdmsplitter}), unless \Lkeyword{coupleralign} |
| 5871 |
% is used.\fi |
| 5872 |
% \iffalse |
| 5873 |
%<*ignore> |
| 5874 |
% \fi |
| 5875 |
\begin{LTXexample} |
| 5876 |
\begin{pspicture}(4,2) |
| 5877 |
\pnodes(0,2){A}(0,0.5){B}(0,0){C}(4,1){D} |
| 5878 |
\wdmcoupler(A)(B)(C)(D){coupler} |
| 5879 |
\end{pspicture} |
| 5880 |
\end{LTXexample} |
| 5881 |
% \iffalse |
| 5882 |
%</ignore> |
| 5883 |
% \fi |
| 5884 |
% |
| 5885 |
% \iffalse |
| 5886 |
%<*ignore> |
| 5887 |
% \fi |
| 5888 |
\begin{LTXexample} |
| 5889 |
\begin{pspicture}(4,2) |
| 5890 |
\pnodes(0,2){E}(0,0.5){F}(0,0){G}(4,2){H} |
| 5891 |
\wdmcoupler[coupleralign=t](E)(F)(G)(H){coupler} |
| 5892 |
\end{pspicture} |
| 5893 |
\end{LTXexample} |
| 5894 |
% \iffalse |
| 5895 |
%</ignore> |
| 5896 |
% \fi |
| 5897 |
% |
| 5898 |
% \iffalse |
| 5899 |
%<*ignore> |
| 5900 |
% \fi |
| 5901 |
\begin{LTXexample} |
| 5902 |
\begin{pspicture}(4,2) |
| 5903 |
\pnodes(0,1){A}(4,2){B}(4,0.5){C}(4,0){D} |
| 5904 |
\wdmsplitter(A)(B)(C)(D){splitter} |
| 5905 |
\end{pspicture} |
| 5906 |
\end{LTXexample} |
| 5907 |
% \iffalse |
| 5908 |
%</ignore> |
| 5909 |
% \fi |
| 5910 |
% |
| 5911 |
% \iffalse |
| 5912 |
%<*ignore> |
| 5913 |
% \fi |
| 5914 |
\begin{LTXexample} |
| 5915 |
\begin{pspicture}(4,2) |
| 5916 |
\pnodes(0,0.5){E}(4,2){F}(4,1.5){G}(4,0){H} |
| 5917 |
\wdmsplitter[coupleralign=b](E)(F)(G)(H){splitter} |
| 5918 |
\end{pspicture} |
| 5919 |
\end{LTXexample} |
| 5920 |
% \iffalse |
| 5921 |
%</ignore> |
| 5922 |
% \fi |
| 5923 |
% \ifGERMAN\subsection{Eingangs- und Ausgangsknoten}\fi |
| 5924 |
% \ifENGLISH\subsection{Input and output nodes}\fi |
| 5925 |
% \label{sec:coupler-nodes} |
| 5926 |
% |
| 5927 |
% \ifGERMAN |
| 5928 |
% Die Definition der Eingangs- und Ausgangsknoten aus \prettyref{sec:ifcnode} |
| 5929 |
% ist für Koppler nicht anwendbar. Hier werden die Knoten einfach von \opt{1} |
| 5930 |
% (links oben) bis \opt{N} (rechts unten) durchnummeriert. |
| 5931 |
% \fi |
| 5932 |
% \ifENGLISH |
| 5933 |
% The definition of input and output nodes from \prettyref{sec:ifcnode} cannot |
| 5934 |
% be applied to couplers. Here, the nodes are simply numbered from \opt{1} (left |
| 5935 |
% top) to \opt{N} (right bottom). |
| 5936 |
% \fi |
| 5937 |
% \begin{center} |
| 5938 |
% \begin{pspicture}(11,2) |
| 5939 |
% \psset{couplersize=0.6, couplertype=rectangle, couplersep=0.25} |
| 5940 |
% \wdmsplitter(0,1.25)(3,2)(3,1.25)(3,0.5) |
| 5941 |
% \psdot(\oenodeIfc{1}{})\uput[120](\oenodeIfc{1}{}){1} |
| 5942 |
% \psdot(\oenodeIfc{2}{})\uput[90](\oenodeIfc{2}{}){2} |
| 5943 |
% \psdot(\oenodeIfc{3}{})\uput[180](\oenodeIfc{3}{}){3} |
| 5944 |
% \psdot(\oenodeIfc{N}{})\uput[-90](\oenodeIfc{N}{}){N} |
| 5945 |
% \wdmcoupler(4,2)(4,1.25)(4,0.5)(7,1.25) |
| 5946 |
% \psdot(\oenodeIfc{1}{})\uput[90](\oenodeIfc{1}{}){1} |
| 5947 |
% \psdot(\oenodeIfc{2}{})\uput[0](\oenodeIfc{2}{}){2} |
| 5948 |
% \psdot(\oenodeIfc{3}{})\uput[-90](\oenodeIfc{3}{}){3} |
| 5949 |
% \psdot(\oenodeIfc{N}{})\uput[60](\oenodeIfc{N}{}){N} |
| 5950 |
% \optcoupler(8,2)(8,0.5)(11,2)(11,0.5) |
| 5951 |
% \psdot(\oenodeIfc{1}{})\uput[90](\oenodeIfc{1}{}){1} |
| 5952 |
% \psdot(\oenodeIfc{2}{})\uput[-90](\oenodeIfc{2}{}){2} |
| 5953 |
% \psdot(\oenodeIfc{3}{})\uput[90](\oenodeIfc{3}{}){3} |
| 5954 |
% \psdot(\oenodeIfc{N}{})\uput[-90](\oenodeIfc{N}{}){N} |
| 5955 |
% \rput[b](1.5,0){\nxLcomp{wdmsplitter}} |
| 5956 |
% \rput[b](5.5,0){\nxLcomp{wdmcoupler}} |
| 5957 |
% \rput[b](9.5,0){\nxLcomp{optcoupler}} |
| 5958 |
% \end{pspicture} |
| 5959 |
% \end{center} |
| 5960 |
% |
| 5961 |
% |
| 5962 |
% \ifGERMAN\subsection{Referenzknoten}\fi |
| 5963 |
% \ifENGLISH\subsection{Reference nodes}\fi |
| 5964 |
% \label{sec:coupler-refnodes} |
| 5965 |
% |
| 5966 |
% \ifGERMAN |
| 5967 |
% Die Definition der Referenzknoten aus \prettyref{sec:refnode} ist für Koppler |
| 5968 |
% nicht anwendbar und hängt von \Lkeyword{coupleralign} ab. |
| 5969 |
% \fi |
| 5970 |
% \ifENGLISH |
| 5971 |
% The definition of reference nodes from \prettyref{sec:refnode} cannot be |
| 5972 |
% applied to couplers and depends on \Lkeyword{coupleralign}. |
| 5973 |
% \fi |
| 5974 |
% \begin{center} |
| 5975 |
% \begin{pspicture}(12,2) |
| 5976 |
% \psset{couplersize=0.5, couplertype=rectangle, couplersep=0.2} |
| 5977 |
% \optcoupler(0, 2)(0,0.7)(3,2)(3,0.7) |
| 5978 |
% \psdot(\oenodeRefA{})\uput[90](\oenodeRefA{}){RefA} |
| 5979 |
% \psdot(\oenodeRefB{})\uput[90](\oenodeRefB{}){RefB} |
| 5980 |
% \optcoupler[coupleralign=top](4.5, 2)(4.5,0.7)(7.5,2)(7.5,0.7) |
| 5981 |
% \psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 5982 |
% \psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 5983 |
% \optcoupler[coupleralign=bottom](9, 2)(9,0.7)(12,2)(12,0.7) |
| 5984 |
% \psdot(\oenodeRefA{})\uput[90](\oenodeRefA{}){RefA} |
| 5985 |
% \psdot(\oenodeRefB{})\uput[90](\oenodeRefB{}){RefB} |
| 5986 |
% \rput[b](1.5,0){\opt{coupleralign=none}} |
| 5987 |
% \rput[b](6,0){\opt{coupleralign=top}} |
| 5988 |
% \rput[b](10.5,0){\opt{coupleralign=bottom}} |
| 5989 |
% \end{pspicture} |
| 5990 |
% \end{center} |
| 5991 |
% |
| 5992 |
% |
| 5993 |
% \ifGERMAN\section{Faserbox}\fi |
| 5994 |
% \ifENGLISH\section{Fiber box}\fi |
| 5995 |
% |
| 5996 |
% \begin{ltxsyntax} |
| 5997 |
% \xLfmultipole{fiberbox}% |
| 5998 |
% \compitem{fiberbox}(in)(out){label} |
| 5999 |
% \compitem*{fiberbox}(tl)(bl)(tr)(br){label} |
| 6000 |
% \end{ltxsyntax} |
| 6001 |
% |
| 6002 |
% \ifGERMAN |
| 6003 |
% Eine \Lcomp{fiberbox} kann entweder mit zwei, oder mit vier Knoten |
| 6004 |
% positioniert werden. Die Wahl beeinflusst die Position der Komponente |
| 6005 |
% und der Komponentenknoten und die automatischen Faserverbindungen. |
| 6006 |
% |
| 6007 |
% Werden nur zwei Knoten verwendet, dann sind das die Referenzknoten und |
| 6008 |
% der Abstand zwischen zwei benachbarten Eingangs- oder Ausgangsknoten |
| 6009 |
% muss manuell angegeben werden (siehe \Lkeyword{fiberboxsepin} und |
| 6010 |
% \Lkeyword{fiberboxsepout}). Nur die Seiten der Komponente wird |
| 6011 |
% automatische mit Fasern verbunden, die nur einen einzigen Knoten hat |
| 6012 |
% (siehe \Lkeyword{fiberboxcount} und das folgende Beispiel). |
| 6013 |
% \fi |
| 6014 |
% \ifENGLISH |
| 6015 |
% A \Lcomp{fiberbox} can be positioned either with two, or four nodes which |
| 6016 |
% affects the positioning of the component and the interface nodes, and the |
| 6017 |
% automatic fiber connections. |
| 6018 |
% |
| 6019 |
% If only two nodes are used these are the reference nodes and the separation |
| 6020 |
% between the components input and output nodes must be specified manually (see |
| 6021 |
% \Lkeyword{fiberboxsepin} and \Lkeyword{fiberboxsepout}). Only the side of the |
| 6022 |
% component is connected automatically which has a single node only (see |
| 6023 |
% \Lkeyword{fiberboxcount} and the following example). |
| 6024 |
% \fi |
| 6025 |
% |
| 6026 |
% \iffalse |
| 6027 |
%<*ignore> |
| 6028 |
% \fi |
| 6029 |
\begin{LTXexample}[linerange={1-2,5-5}] |
| 6030 |
\begin{pspicture}(3,2) |
| 6031 |
\fiberbox[fiberboxcount=1x2, showifcnodes](0,1)(3,1) |
| 6032 |
\psdot(\oenodeRefA{})\uput[90](\oenodeRefA{}){RefA} |
| 6033 |
\psdot(\oenodeRefB{})\uput[90](\oenodeRefB{}){RefB} |
| 6034 |
\end{pspicture} |
| 6035 |
\end{LTXexample} |
| 6036 |
% \iffalse |
| 6037 |
%</ignore> |
| 6038 |
% \fi |
| 6039 |
% |
| 6040 |
% \ifGERMAN |
| 6041 |
% Werden vier Knoten verwendet, dann wird die Lage der Komponentenknoten |
| 6042 |
% und deren Abstand automatisch bestimmt. Die Komponente wird zwischen |
| 6043 |
% der Mitte der beiden Eingangsknoten und der Mitte der beiden |
| 6044 |
% Ausgangsknoten positioniert. Der erste Eingangsknoten wird an dem |
| 6045 |
% \prm{tl}-Knoten ausgerichtet, der letzte Eingangsknoten an dem |
| 6046 |
% \prm{bl}-Knoten. Die übrigen Eingangsknoten werden dazwischen |
| 6047 |
% gleichverteilt. Die Ausgangsknoten werden entsprechend behandelt. Die |
| 6048 |
% vier angegebenen Knoten werden automatisch mit den jeweils |
| 6049 |
% zugeordneten Komponentenknoten verbunden. |
| 6050 |
% \fi |
| 6051 |
% \ifENGLISH |
| 6052 |
% When four nodes are used the interface nodes and their separation are |
| 6053 |
% determined automatically. The component is positioned between the |
| 6054 |
% center of the two input and the center of the two output nodes. The |
| 6055 |
% first input interface node is aligned with the \prm{tl} node, the last |
| 6056 |
% input node is aligned with \prm{bl}, all other input nodes are equally |
| 6057 |
% distributed between these. The output nodes are handled |
| 6058 |
% accordingly. The four specified nodes are connected automatically to |
| 6059 |
% the component, each with the interface node it is aligned to. |
| 6060 |
% \fi |
| 6061 |
% \iffalse |
| 6062 |
%<*ignore> |
| 6063 |
% \fi |
| 6064 |
\begin{LTXexample}[linerange={1-2,5-5}] |
| 6065 |
\begin{pspicture}(3,2) |
| 6066 |
\fiberbox[fiberboxcount=3x4, showifcnodes](0.5,1.6)(0,0.4)(2.5,2)(3,0) |
| 6067 |
\psdot(\oenodeRefA{})\uput[90](\oenodeRefA{}){RefA} |
| 6068 |
\psdot(\oenodeRefB{})\uput[90](\oenodeRefB{}){RefB} |
| 6069 |
\end{pspicture} |
| 6070 |
\end{LTXexample} |
| 6071 |
% \iffalse |
| 6072 |
%</ignore> |
| 6073 |
% \fi |
| 6074 |
% |
| 6075 |
% \begin{optionlist} |
| 6076 |
% \numitem[1]{fiberboxwidth} |
| 6077 |
% \ifGERMAN Die Breite der Faserbox.\fi |
| 6078 |
% \ifENGLISH The width of the fiber box.\fi |
| 6079 |
% |
| 6080 |
% \numitem[0]{fiberboxheight} |
| 6081 |
% \ifGERMAN Die Höhe der Faserbox. Ist die Höhe kleiner als der Platz |
| 6082 |
% der von den Eingangs- oder Ausgangsknoten benötigt wird, dann wird |
| 6083 |
% die Höhe automatisch berechnet. Die berechnete Höhe ist |
| 6084 |
% $\text{max}\,(\text{sepin}\times(\text{N}-1), |
| 6085 |
% \text{sepout}\times(\text{M}-1))$. |
| 6086 |
% \fi |
| 6087 |
% \ifENGLISH The height of the fiber box. If the height is lower than |
| 6088 |
% the space required by the input or output nodes, it is calculated |
| 6089 |
% automatically. The calculated height is |
| 6090 |
% $\text{max}\,(\text{sepin}\times(\text{N}-1), |
| 6091 |
% \text{sepout}\times(\text{M}-1))$. |
| 6092 |
% \fi |
| 6093 |
% \iffalse |
| 6094 |
%<*ignore> |
| 6095 |
% \fi |
| 6096 |
\begin{LTXexample} |
| 6097 |
\begin{pspicture}(3,2.8) |
| 6098 |
\psset[optexp]{innerlabel, fiberboxwidth=1, fiberboxcount=1x2} |
| 6099 |
\fiberbox(0,2)(0,2)(3,2.5)(3,1.5){auto} |
| 6100 |
\fiberbox[fiberboxheight=1.05](0,0.5)(0,0.5)(3,1)(3,0){fix} |
| 6101 |
\end{pspicture} |
| 6102 |
\end{LTXexample} |
| 6103 |
% \iffalse |
| 6104 |
%</ignore> |
| 6105 |
% \fi |
| 6106 |
% |
| 6107 |
% \optitem{fiberboxsize}{\prm{width} \prm{height}} |
| 6108 |
% \ifGERMAN Die Breite und Höhe der Faserbox, ist äquivalent zum Aufruf von |
| 6109 |
% \Lkeyword{fiberboxwidth} und \Lkeyword{fiberboxheight}. |
| 6110 |
% \fi |
| 6111 |
% \ifENGLISH The width and height of the fiber box, is equivalent to calling |
| 6112 |
% both \Lkeyword{fiberboxwidth} and \Lkeyword{fiberboxheight}. |
| 6113 |
% \fi |
| 6114 |
% |
| 6115 |
% \numitem[0.2]{fiberboxsepin} |
| 6116 |
% \ifGERMAN Der Abstand zwischen zwei Eingangsknoten. Dieser Wert wird nur |
| 6117 |
% verwendet, falls die Faserbox mit zwei Knoten positioniert wird. Ansonsten |
| 6118 |
% wird der Abstand automatisch ermittelt wird. |
| 6119 |
% \fi |
| 6120 |
% \ifENGLISH The separation between two input nodes. This value is |
| 6121 |
% used only if the fiber box is positioned with two nodes. Otherwise |
| 6122 |
% the separation is calculated automatically. |
| 6123 |
% \fi |
| 6124 |
% |
| 6125 |
% \numitem[0.2]{fiberboxsepout} |
| 6126 |
% \ifGERMAN Analog zu \Lkeyword{fiberboxsepin}, aber für die Ausgangsknoten.\fi |
| 6127 |
% \ifENGLISH Equivalent to \Lkeyword{fiberboxsepout}, but for the output nodes.\fi |
| 6128 |
% |
| 6129 |
% \optitem[2x2]{fiberboxcount}{\prm{N}x\prm{M}} |
| 6130 |
% \ifGERMAN Anzahl der Eingangs- (\prm{N}) und Ausgangsknoten (\prm{M}).\fi |
| 6131 |
% \ifENGLISH Number of input (\prm{N}) and output nodes (\prm{M}).\fi |
| 6132 |
% \end{optionlist} |
| 6133 |
% |
| 6134 |
% \ifGERMAN Für bestimmte Parameterkombinationen ist eine \Lcomp{fiberbox} |
| 6135 |
% äquivalent zu einer \Lcomp{optbox}. |
| 6136 |
% \fi |
| 6137 |
% \ifENGLISH For certain parameter configurations a \Lcomp{fiberbox} is |
| 6138 |
% equivalent to an \Lcomp{optbox}. |
| 6139 |
% \fi |
| 6140 |
% \iffalse |
| 6141 |
%<*ignore> |
| 6142 |
% \fi |
| 6143 |
\begin{LTXexample} |
| 6144 |
\begin{pspicture}(0,0.3)(3,2.6) |
| 6145 |
\psset[optexp]{label=0.6} |
| 6146 |
\fiberbox[fiberboxsize=1.2 0.6, fiberboxcount=1x1](0,2.5)(3,2.5){fiberbox} |
| 6147 |
\optbox[optboxsize=1.2 0.6, fiber](0,1)(3,1){optbox} |
| 6148 |
\end{pspicture} |
| 6149 |
\end{LTXexample} |
| 6150 |
% \iffalse |
| 6151 |
%</ignore> |
| 6152 |
% \fi |
| 6153 |
% \psset{usefiberstyle=false} |
| 6154 |
% |
| 6155 |
% |
| 6156 |
% \ifGERMAN\chapter{Elektrische Komponenten}\fi |
| 6157 |
% \ifENGLISH\chapter{Electrical components}\fi |
| 6158 |
% \label{chap:electrcomp} |
| 6159 |
% |
| 6160 |
% \ifGERMAN\section{Koppler}\fi |
| 6161 |
% \ifENGLISH\section{Coupler}\fi |
| 6162 |
% |
| 6163 |
% \begin{ltxsyntax} |
| 6164 |
% \xLemultipole{eleccoupler}% |
| 6165 |
% \compitem{eleccoupler}(tl)(bl)(tr)(br){label} |
| 6166 |
% \iffalse |
| 6167 |
%<*ignore> |
| 6168 |
% \fi |
| 6169 |
\begin{LTXexample} |
| 6170 |
\begin{pspicture}(3,1.5) |
| 6171 |
\eleccoupler(0,1.5)(0,0)(3,1.5)(3,0) |
| 6172 |
\end{pspicture} |
| 6173 |
\end{LTXexample} |
| 6174 |
% \iffalse |
| 6175 |
%</ignore> |
| 6176 |
% \fi |
| 6177 |
% \end{ltxsyntax} |
| 6178 |
% \begin{optionlist} |
| 6179 |
% \optitem[0.8]{eleccouplersize}{\prm{size} or \prm{width} \prm{height}} |
| 6180 |
% \ifGERMAN Die Breite und Höhe des Kopplers, wird nur ein Wert |
| 6181 |
% angegeben dann ist die Komponente quadratisch. |
| 6182 |
% \fi |
| 6183 |
% \ifENGLISH The width and height of the couplers, if only one value |
| 6184 |
% is given the component is squared. |
| 6185 |
% \fi |
| 6186 |
% \iffalse |
| 6187 |
%<*ignore> |
| 6188 |
% \fi |
| 6189 |
\begin{LTXexample}[morekeywords={[21]eleccouplersize}] |
| 6190 |
\begin{pspicture}(3,1.5) |
| 6191 |
\eleccoupler[eleccouplersize=1 0.6](0,1.5)(0,0)(3,1.5)(3,0) |
| 6192 |
\end{pspicture} |
| 6193 |
\end{LTXexample} |
| 6194 |
% \iffalse |
| 6195 |
%</ignore> |
| 6196 |
% \fi |
| 6197 |
% \numitem[\{\}]{eleccouplersep} |
| 6198 |
% \ifGERMAN Der vertikale Abstand zwischen den beiden Eingangs- |
| 6199 |
% bzw. Ausgangsanschlüssen. Ist der Wert leer, bzw. gleich \{\}, dann |
| 6200 |
% wird der Abstand auf 75\% der Höhe gesetzt. |
| 6201 |
% \fi |
| 6202 |
% \ifENGLISH The vertical distance between the two input and output |
| 6203 |
% ports. If the value is empty \{\}, then the separation is set to |
| 6204 |
% 75\% of the height. |
| 6205 |
% \fi |
| 6206 |
% |
| 6207 |
% \choitem[standard]{eleccouplertype}{standard, directional} |
| 6208 |
% \ifGERMAN Wählt zwischen unterschiedlichen Kopplertypen.\fi |
| 6209 |
% \ifENGLISH Select between different coupler types.\fi |
| 6210 |
% \iffalse |
| 6211 |
%<*ignore> |
| 6212 |
% \fi |
| 6213 |
\begin{LTXexample}[morekeywords={[21]eleccouplertype}] |
| 6214 |
\begin{pspicture}(3,1.5) |
| 6215 |
\eleccoupler[eleccouplertype=directional](0,1.5)(0,0)(3,1.5)(3,0) |
| 6216 |
\end{pspicture} |
| 6217 |
\end{LTXexample} |
| 6218 |
% \iffalse |
| 6219 |
%</ignore> |
| 6220 |
% \fi |
| 6221 |
% |
| 6222 |
% \choitem[left]{eleccouplerinput}{left, right} |
| 6223 |
% \ifGERMAN Gibt beim direktionalen Koppler die Eingangsseite an.\fi |
| 6224 |
% \ifENGLISH Selects the input side for the directional coupler.\fi |
| 6225 |
% \iffalse |
| 6226 |
%<*ignore> |
| 6227 |
% \fi |
| 6228 |
\begin{LTXexample}[morekeywords={[21]eleccouplerinput}] |
| 6229 |
\begin{pspicture}(3,1.5) |
| 6230 |
\eleccoupler[eleccouplertype=directional, eleccouplerinput=right](0,1.5)(0,0)(3,1.5)(3,0) |
| 6231 |
\end{pspicture} |
| 6232 |
\end{LTXexample} |
| 6233 |
% \iffalse |
| 6234 |
%</ignore> |
| 6235 |
% \fi |
| 6236 |
% \end{optionlist} |
| 6237 |
% |
| 6238 |
% \ifGERMAN Die automatischen Verbindungen des elektrischen Kopplers |
| 6239 |
% sind, anders als beim optischen Koppler, alle auf die Komponente |
| 6240 |
% gerichtet. Das ergibt ein symmetrisches Layout der automatischen |
| 6241 |
% Verbindungen des elektrischen Kopplers bei Verwendung der Vorgabe |
| 6242 |
% \Lkeyword{wirestyle}\opt{=angle}. |
| 6243 |
% \fi |
| 6244 |
% \ifENGLISH The automatic connections of the electrical coupler are all |
| 6245 |
% directed towards the component, in contrast to the optical |
| 6246 |
% coupler. This gives a symmetric layout of the automatic electrical coupler |
| 6247 |
% connections when using the default of |
| 6248 |
% \Lkeyword{wirestyle}\opt{=angle}. |
| 6249 |
% \fi |
| 6250 |
% |
| 6251 |
% \iffalse |
| 6252 |
%<*ignore> |
| 6253 |
% \fi |
| 6254 |
\begin{LTXexample} |
| 6255 |
\begin{pspicture}(3,4) |
| 6256 |
\addtopsstyle{Wire}{arrows=->} |
| 6257 |
\addtopsstyle{Fiber}{arrows=->, fiberstyle=angle} |
| 6258 |
\eleccoupler(0,4)(0,2)(3,4)(3,2) |
| 6259 |
\optcoupler[couplersize=0.8 0.8, couplersep={}, couplertype=rectangle](0,1.5)(0,0)(3,1.5)(3,0) |
| 6260 |
\end{pspicture} |
| 6261 |
\end{LTXexample} |
| 6262 |
% \iffalse |
| 6263 |
%</ignore> |
| 6264 |
% \fi |
| 6265 |
% |
| 6266 |
% \ifGERMAN\section{Synthesizer}\fi |
| 6267 |
% \ifENGLISH\section{Synthesizer}\fi |
| 6268 |
% |
| 6269 |
% \begin{ltxsyntax} |
| 6270 |
% \xLemultipole{elecsynthesizer}% |
| 6271 |
% \compitem{elecsynthesizer}(in)(out){label} |
| 6272 |
% \iffalse |
| 6273 |
%<*ignore> |
| 6274 |
% \fi |
| 6275 |
\begin{LTXexample} |
| 6276 |
\begin{pspicture}(3,1.5) |
| 6277 |
\elecsynthesizer(1,1)(3,1){SYN} |
| 6278 |
\end{pspicture} |
| 6279 |
\end{LTXexample} |
| 6280 |
% \iffalse |
| 6281 |
%</ignore> |
| 6282 |
% \fi |
| 6283 |
% \end{ltxsyntax} |
| 6284 |
% \iffalse |
| 6285 |
%<*ignore> |
| 6286 |
% \fi |
| 6287 |
\begin{LTXexample} |
| 6288 |
\begin{pspicture}(3,1.5) |
| 6289 |
\elecsynthesizer[position=0.5](0,1)(3,1){SYN} |
| 6290 |
\end{pspicture} |
| 6291 |
\end{LTXexample} |
| 6292 |
% \iffalse |
| 6293 |
%</ignore> |
| 6294 |
% \fi |
| 6295 |
% \begin{optionlist} |
| 6296 |
% \optitem[0.8]{synthsize}{\prm{size} or \prm{width} \prm{height}} |
| 6297 |
% \ifGERMAN Die Größe der Komponente, ist diese rund und wurden zwei |
| 6298 |
% Werte angegeben, dann wird der kleinere als Durchmesser verwendet. |
| 6299 |
% \fi |
| 6300 |
% \ifENGLISH The size of the component, if this is of circular shape |
| 6301 |
% and two values were given, the smaller one is used as diameter. |
| 6302 |
% \fi |
| 6303 |
% |
| 6304 |
% \choitem[sine]{synthtype}{sine, pulse, sawtooth, rectangle, triangle, custom} |
| 6305 |
% \ifGERMAN Wählt zwischen unterschiedlichen Typen.\fi |
| 6306 |
% \ifENGLISH Select between different synthesizer types.\fi |
| 6307 |
% \iffalse |
| 6308 |
%<*ignore> |
| 6309 |
% \fi |
| 6310 |
\begin{LTXexample}[morekeywords={[21]synthtype}] |
| 6311 |
\begin{pspicture}(0,0.6)(3,5.4) |
| 6312 |
\elecsynthesizer[synthtype=sine](1,5)(3,5) |
| 6313 |
\elecsynthesizer[synthtype=sawtooth](1,4)(3,4) |
| 6314 |
\elecsynthesizer[synthtype=triangle](1,3)(3,3) |
| 6315 |
\elecsynthesizer[synthtype=rectangle](1,2)(3,2) |
| 6316 |
\elecsynthesizer[synthtype=pulse](1,1)(3,1) |
| 6317 |
\end{pspicture} |
| 6318 |
\end{LTXexample} |
| 6319 |
% \iffalse |
| 6320 |
%</ignore> |
| 6321 |
% \fi |
| 6322 |
% |
| 6323 |
% \ifGERMAN Es kann auch eine frei wählbare Wellenform gewählt werden.\fi |
| 6324 |
% \ifENGLISH You can also use a freely customizable waveform.\fi |
| 6325 |
% |
| 6326 |
% \iffalse |
| 6327 |
%<*ignore> |
| 6328 |
% \fi |
| 6329 |
\begin{LTXexample}[morekeywords={[21]synthtype}] |
| 6330 |
\begin{pspicture}(0,0)(3,2) |
| 6331 |
\makeatletter |
| 6332 |
\def\elecsynthesizer@custom{% |
| 6333 |
\psline(-0.25,-0.1)(-0.1,-0.1)(-0.1,0)% |
| 6334 |
(0.1,0)(0.1,0.1)(0.25,0.1)} |
| 6335 |
\makeatother |
| 6336 |
\elecsynthesizer[synthtype=custom](1,1)(3,1) |
| 6337 |
\end{pspicture} |
| 6338 |
\end{LTXexample} |
| 6339 |
% \iffalse |
| 6340 |
%</ignore> |
| 6341 |
% \fi |
| 6342 |
% |
| 6343 |
% \choitem[circle]{synthshape}{circle, rectangle} |
| 6344 |
% \ifGERMAN Wählt zwischen kreisförmiger und rechteckiger Außenform.\fi |
| 6345 |
% \ifENGLISH Select between circular and rectangular outer shape.\fi |
| 6346 |
% |
| 6347 |
% \iffalse |
| 6348 |
%<*ignore> |
| 6349 |
% \fi |
| 6350 |
\begin{LTXexample}[morekeywords={[21]synthshape}] |
| 6351 |
\begin{pspicture}(3,1.5) |
| 6352 |
\elecsynthesizer[synthshape=rectangle](1,1)(3,1){SYN} |
| 6353 |
\end{pspicture} |
| 6354 |
\end{LTXexample} |
| 6355 |
% \iffalse |
| 6356 |
%</ignore> |
| 6357 |
% \fi |
| 6358 |
% \end{optionlist} |
| 6359 |
% |
| 6360 |
% \begin{stylelist} |
| 6361 |
% \styleitem{SynthStyle} |
| 6362 |
% \ifGERMAN Beinflusst das Aussehen der internen Symbole.\fi |
| 6363 |
% \ifENGLISH Change the style of the internal synthesizer symbol.\fi |
| 6364 |
% \iffalse |
| 6365 |
%<*ignore> |
| 6366 |
% \fi |
| 6367 |
\begin{LTXexample}[morekeywords={[21]SynthStyle}] |
| 6368 |
\begin{pspicture}(3,1) |
| 6369 |
\newpsstyle{SynthStyle}{xunit=0.5, yunit=-1} |
| 6370 |
\elecsynthesizer(1,0.5)(3,0.5) |
| 6371 |
\end{pspicture} |
| 6372 |
\end{LTXexample} |
| 6373 |
% \iffalse |
| 6374 |
%</ignore> |
| 6375 |
% \fi |
| 6376 |
% \end{stylelist} |
| 6377 |
% |
| 6378 |
% \ifGERMAN\section{Mixer}\fi |
| 6379 |
% \ifENGLISH\section{Mixer}\fi |
| 6380 |
% |
| 6381 |
% \begin{ltxsyntax} |
| 6382 |
% \xLemultipole{elecmixer}% |
| 6383 |
% \compitem{elecmixer}(left)(right)(bottom){label}% |
| 6384 |
% \iffalse |
| 6385 |
%<*ignore> |
| 6386 |
% \fi |
| 6387 |
\begin{LTXexample} |
| 6388 |
\begin{pspicture}(3,2) |
| 6389 |
\newpsstyle{Wire}{arrowscale=1.5, arrowinset=0, arrows=->} |
| 6390 |
\addtopsstyle{WireOut1}{linecolor=blue} |
| 6391 |
\addtopsstyle{WireOut2}{linecolor=green!80!black} |
| 6392 |
\elecmixer(0,1)(3,1)(1.5,0){Mixer} |
| 6393 |
\end{pspicture} |
| 6394 |
\end{LTXexample} |
| 6395 |
% \iffalse |
| 6396 |
%</ignore> |
| 6397 |
% \fi |
| 6398 |
% \end{ltxsyntax} |
| 6399 |
% |
| 6400 |
% \begin{optionlist} |
| 6401 |
% \numitem[0.8]{elecmixersize} |
| 6402 |
% \ifGERMAN Der Durchmesser des Mixers.\fi |
| 6403 |
% \ifENGLISH The diameter of the mixer.\fi |
| 6404 |
% \end{optionlist} |
| 6405 |
% |
| 6406 |
% \ifGERMAN Weitere Details bezüglich der Referenzknoten und |
| 6407 |
% Positionierung finden Sie unter \Lcomp{optcirculator}. |
| 6408 |
% \fi |
| 6409 |
% \ifENGLISH For further details about the reference nodes and the |
| 6410 |
% positioning, please refer to \Lcomp{optcirculator}. |
| 6411 |
% \fi |
| 6412 |
% |
| 6413 |
% \ifGERMAN\chapter{Hybridkomponenten}\fi |
| 6414 |
% \ifENGLISH\chapter{Hybrid components}\fi |
| 6415 |
% \label{sec:hybridcomp} |
| 6416 |
% |
| 6417 |
% \ifENGLISH This chapter describes the components which can be used both for |
| 6418 |
% free-ray and fiber optics but which differ from these two categories. |
| 6419 |
% |
| 6420 |
% The \Lcomp{optfilter} is connected by default with automatic fiber |
| 6421 |
% connections, but can likewise be used with free-ray beams, in contrast |
| 6422 |
% to the fiber components (\prettyref{chap:fibercomp}). The |
| 6423 |
% \Lcomp{fibercollimator} has one interface only, the other connection is |
| 6424 |
% a fiber and the \Lcomp{optdetector} has one interface, the other |
| 6425 |
% connection is a wire. |
| 6426 |
% \fi |
| 6427 |
% \ifGERMAN Dieses Kapitel beschreibt die Komponenten, die sowohl für |
| 6428 |
% Freistrahl- als auch Faseroptik zu verwenden sind, sich von diesen aber etwas |
| 6429 |
% abgrenzen. |
| 6430 |
% |
| 6431 |
% Der \Lcomp{optfilter} wird mit den Voreinstellungen zwar als |
| 6432 |
% Faserkomponente gehandhabt, kann jedoch im Gegensatz zu den reinen |
| 6433 |
% Faserkomponenten (\prettyref{chap:fibercomp}) auch als |
| 6434 |
% Freistrahlkomponente verwendet werden. Der \Lcomp{fibercollimator} hat |
| 6435 |
% nur eine Faser, die andere Verbindung ist Freistrahl und der |
| 6436 |
% \Lcomp{optdetector} hat eine Freistrahl- und eine elektrische |
| 6437 |
% Verbindung. |
| 6438 |
% \fi |
| 6439 |
% |
| 6440 |
% \ifGERMAN\section{Optischer Filter}\fi |
| 6441 |
% \ifENGLISH\section{Optical filter}\fi |
| 6442 |
% |
| 6443 |
% \psset{usefiberstyle} |
| 6444 |
% \begin{ltxsyntax} |
| 6445 |
% \fiberdipoledesc{optfilter} |
| 6446 |
% \iffalse |
| 6447 |
%<*ignore> |
| 6448 |
% \fi |
| 6449 |
\begin{LTXexample} |
| 6450 |
\begin{pspicture}(3,1.5) |
| 6451 |
\optfilter(0,1)(3,1){bandpass} |
| 6452 |
\end{pspicture} |
| 6453 |
\end{LTXexample} |
| 6454 |
% \iffalse |
| 6455 |
%</ignore> |
| 6456 |
% \fi |
| 6457 |
% \end{ltxsyntax} |
| 6458 |
% |
| 6459 |
% \begin{optionlist} |
| 6460 |
% \numitem[0.8]{filtersize} |
| 6461 |
% \ifGERMAN Die Größe des Filters.\fi |
| 6462 |
% \ifENGLISH The size of the filter.\fi |
| 6463 |
% |
| 6464 |
% \choitem[bandpass]{filtertype}{bandpass, bandstop, lowpass, highpass} |
| 6465 |
% \ifGERMAN Wähle zwischen unterschiedlichen Filtertypen.\fi |
| 6466 |
% \ifENGLISH Select between different filter types.\fi |
| 6467 |
% \iffalse |
| 6468 |
%<*ignore> |
| 6469 |
% \fi |
| 6470 |
\begin{LTXexample}[morekeywords={[21]{filtertype}}] |
| 6471 |
\begin{pspicture}(3,1.5) |
| 6472 |
\optfilter[filtertype=bandstop](0,1)(3,1){bandstop} |
| 6473 |
\end{pspicture} |
| 6474 |
\end{LTXexample} |
| 6475 |
% \iffalse |
| 6476 |
%</ignore> |
| 6477 |
% \fi |
| 6478 |
% \iffalse |
| 6479 |
%<*ignore> |
| 6480 |
% \fi |
| 6481 |
\begin{LTXexample}[morekeywords={[21]{filtertype}}] |
| 6482 |
\begin{pspicture}(3,1.5) |
| 6483 |
\optfilter[filtertype=lowpass](0,1)(3,1){lowpass} |
| 6484 |
\end{pspicture} |
| 6485 |
\end{LTXexample} |
| 6486 |
|
| 6487 |
\begin{LTXexample}[morekeywords={[21]{filtertype}}] |
| 6488 |
\begin{pspicture}(3,1.5) |
| 6489 |
\optfilter[filtertype=highpass](0,1)(3,1){highpass} |
| 6490 |
\end{pspicture} |
| 6491 |
\end{LTXexample} |
| 6492 |
% \iffalse |
| 6493 |
%</ignore> |
| 6494 |
% \fi |
| 6495 |
% |
| 6496 |
% \numitem[0]{filterangle} |
| 6497 |
% \ifGERMAN Dreht das «Innere» des Filters relativ zum seinem |
| 6498 |
% Rahmen. Anstattdessn kann auch \Lkeyword{innercompalign} verwendet |
| 6499 |
% werden. |
| 6500 |
% \fi |
| 6501 |
% \ifENGLISH Rotates the «inner» part of the filter relativ to its |
| 6502 |
% frame. Alternatively \Lkeyword{innercompalign} can be used. |
| 6503 |
% \fi |
| 6504 |
% \iffalse |
| 6505 |
%<*ignore> |
| 6506 |
% \fi |
| 6507 |
\begin{LTXexample}[morekeywords={[21]{filterangle}}] |
| 6508 |
\begin{pspicture}(2,2) |
| 6509 |
\optfilter(0.5,0)(0.5,2) |
| 6510 |
\optfilter[filterangle=90](1.5,0)(1.5,2) |
| 6511 |
\end{pspicture} |
| 6512 |
\end{LTXexample} |
| 6513 |
% \iffalse |
| 6514 |
%</ignore> |
| 6515 |
% \fi |
| 6516 |
% \end{optionlist} |
| 6517 |
% |
| 6518 |
% \begin{stylelist} |
| 6519 |
% \styleitem{FilterStyle} |
| 6520 |
% \ifGERMAN Beinflusst das Aussehen der internen Filterlinien.\fi |
| 6521 |
% \ifENGLISH Change the style of the internal filter lines.\fi |
| 6522 |
% \iffalse |
| 6523 |
%<*ignore> |
| 6524 |
% \fi |
| 6525 |
\begin{LTXexample}[morekeywords={[21]FilterStyle}] |
| 6526 |
\begin{pspicture}(3,1.5) |
| 6527 |
\newpsstyle{OptComp}{linewidth=2\pslinewidth} |
| 6528 |
\optfilter(0,1)(1.5,1) |
| 6529 |
\newpsstyle{FilterStyle}{linewidth=0.5\pslinewidth} |
| 6530 |
\optfilter(1.5,1)(3,1) |
| 6531 |
\end{pspicture} |
| 6532 |
\end{LTXexample} |
| 6533 |
% \iffalse |
| 6534 |
%</ignore> |
| 6535 |
% \fi |
| 6536 |
% \end{stylelist} |
| 6537 |
% |
| 6538 |
% \ifGERMAN Verwendung als Freistrahlkomponenten, \Lkeyword{allowbeaminside} ist |
| 6539 |
% auf \opt{false} voreingestellt: |
| 6540 |
% \fi |
| 6541 |
% \ifENGLISH Usage as free-ray component, \Lkeyword{allowbeaminside} is set to |
| 6542 |
% \opt{false} by default: |
| 6543 |
% \fi |
| 6544 |
% \iffalse |
| 6545 |
%<*ignore> |
| 6546 |
% \fi |
| 6547 |
\begin{LTXexample} |
| 6548 |
\begin{pspicture}(3,1.5) |
| 6549 |
\optfilter[fiber=none](0,1)(3,1) |
| 6550 |
\addtopsstyle{Beam}{beamwidth=0.3, |
| 6551 |
fillstyle=solid, fillcolor=green, opacity=0.2} |
| 6552 |
\drawwidebeam(0,1){}(3,1) |
| 6553 |
\end{pspicture} |
| 6554 |
\end{LTXexample} |
| 6555 |
% \iffalse |
| 6556 |
%</ignore> |
| 6557 |
% \fi |
| 6558 |
% |
| 6559 |
% |
| 6560 |
% \ifGERMAN\section{Faserkollimator}\fi |
| 6561 |
% \ifENGLISH\section{Fiber collimator}\fi |
| 6562 |
% |
| 6563 |
% \begin{ltxsyntax} |
| 6564 |
% \xLdipole{fibercollimator}\compitem{fibercollimator}(in)(A)(B)(out){label}% |
| 6565 |
% \iffalse |
| 6566 |
%<*ignore> |
| 6567 |
% \fi |
| 6568 |
\begin{LTXexample} |
| 6569 |
\begin{pspicture}(3,1.5) |
| 6570 |
\fibercollimator[beam](0,1)(3,1){FC} |
| 6571 |
\end{pspicture} |
| 6572 |
\end{LTXexample} |
| 6573 |
% \iffalse |
| 6574 |
%</ignore> |
| 6575 |
% \fi |
| 6576 |
% \end{ltxsyntax} |
| 6577 |
% |
| 6578 |
% \ifGERMAN |
| 6579 |
% Der Faserkollimator kann mit zwei, drei oder vier Punkten verwendet |
| 6580 |
% werden. Bei zwei Punkten wird der Kollimator wie jeder andere Zweipol zwischen |
| 6581 |
% \prm{in} und \prm{out} Knoten platziert. Bei drei Punkten wird eine |
| 6582 |
% \Lcs*{psbezier} Kurve gezeichnet, wobei der mittlere Punkt doppelt verwendet |
| 6583 |
% wird. Die Positionierungsparameter (siehe \prettyref{sec:positioning}) können |
| 6584 |
% verwendet werden um den Kollimator zwischen dem \prm{in} und \prm{A} Knoten |
| 6585 |
% auszurichten. |
| 6586 |
% \fi |
| 6587 |
% \ifENGLISH |
| 6588 |
% The fiber collimator can be used with two, three or four points. With two |
| 6589 |
% points, the collimator is placed like any other dipole component between |
| 6590 |
% \prm{in} and \prm{out} node. For three nodes, the fiber is drawn as |
| 6591 |
% \Lcs*{psbezier} curve for which the central node \prm{A} is used |
| 6592 |
% twice. Positioning parameters (see \prettyref{sec:positioning}) can be used to |
| 6593 |
% shift the object between \prm{in} and \prm{A} nodes. |
| 6594 |
% \fi |
| 6595 |
% \iffalse |
| 6596 |
%<*ignore> |
| 6597 |
% \fi |
| 6598 |
\begin{LTXexample} |
| 6599 |
\begin{pspicture}(3,2) |
| 6600 |
\fibercollimator[beam](0,1)(2,1)(3,2){FC} |
| 6601 |
\end{pspicture} |
| 6602 |
\end{LTXexample} |
| 6603 |
% \iffalse |
| 6604 |
%</ignore> |
| 6605 |
% \fi |
| 6606 |
% \medskip |
| 6607 |
% |
| 6608 |
% \ifGERMAN |
| 6609 |
% Bei vier Knoten wird eine \Lcs*{psbezier} Kurve mit allen vier Knoten |
| 6610 |
% gezeichnet. Die Positionierungsparameter (siehe \prettyref{sec:positioning}) |
| 6611 |
% können verwendet werden um den Kollimator zwischen den ersten beiden Knoten |
| 6612 |
% (\prm{in} und \prm{A}) zu verschieben. |
| 6613 |
% \fi |
| 6614 |
% \ifENGLISH |
| 6615 |
% For four nodes, the fiber is drawn as \Lcs*{psbezier} curve with the specified |
| 6616 |
% nodes. Positioning parameters (siehe \prettyref{sec:positioning}) can be used |
| 6617 |
% to shift the object between the first two nodes (\prm{in} and \prm{A}). |
| 6618 |
% \fi |
| 6619 |
% \iffalse |
| 6620 |
%<*ignore> |
| 6621 |
% \fi |
| 6622 |
\begin{LTXexample} |
| 6623 |
\begin{pspicture}(3,2) |
| 6624 |
\fibercollimator[beam](0,1)(2,1)(3,1)(3,2){FC} |
| 6625 |
\end{pspicture} |
| 6626 |
\end{LTXexample} |
| 6627 |
% \iffalse |
| 6628 |
%</ignore> |
| 6629 |
% \fi |
| 6630 |
% |
| 6631 |
% \begin{optionlist} |
| 6632 |
% \optitem[0.3]{fibercolsize}{\prm{num} or \prm{width} \prm{height}} |
| 6633 |
% \ifGERMAN |
| 6634 |
% Eine einzelne Zahl gibt die Seitenlänge des Kollimators an, zwei Zahlen die Breite und |
| 6635 |
% Höhe. Beachten Sie, dass \opt{fibercolsize=1} und \opt{fibercolsize=1 1} nicht |
| 6636 |
% dasselbe Ergebnis liefern. Alternativ kann das Verhältnis zwischen Höhe und |
| 6637 |
% Breite mit \opt{xunit} und \opt{yunit} geändert werden. |
| 6638 |
% \fi |
| 6639 |
% \ifENGLISH |
| 6640 |
% A single number gives the side length of the collimator, two numbers the width |
| 6641 |
% and height. Note, that \opt{fibercolsize=1} and \opt{fibercolsize=1 1} do not give |
| 6642 |
% the same result. You may also change the relation of width and height with |
| 6643 |
% \opt{xunit} and \opt{yunit}. |
| 6644 |
% \fi |
| 6645 |
% \end{optionlist} |
| 6646 |
% |
| 6647 |
% \ifGERMAN\section{Detektor}\fi |
| 6648 |
% \ifENGLISH\section{Detector}\fi |
| 6649 |
% |
| 6650 |
% \begin{ltxsyntax} |
| 6651 |
% \dipoledesc{optdetector} |
| 6652 |
% \iffalse |
| 6653 |
%<*ignore> |
| 6654 |
% \fi |
| 6655 |
\begin{LTXexample} |
| 6656 |
\begin{pspicture}(3,1.2) |
| 6657 |
\optdetector[beam](0,0)(1.5,1){detector} |
| 6658 |
\end{pspicture} |
| 6659 |
\end{LTXexample} |
| 6660 |
% \iffalse |
| 6661 |
%</ignore> |
| 6662 |
% \fi |
| 6663 |
% \end{ltxsyntax} |
| 6664 |
% |
| 6665 |
% \ifENGLISH The detector is placed by default at the end of the |
| 6666 |
% reference line (\Lkeyword{position}\opt{=end}). If this setting is |
| 6667 |
% overwritten, the output connection is treated like that of an |
| 6668 |
% electrical component. |
| 6669 |
% \fi |
| 6670 |
% \ifGERMAN Der Detektor wird in der Voreinstellung ans Ende der |
| 6671 |
% Referenzlinie platziert (\Lkeyword{position}\opt{=end}). Wird dieser |
| 6672 |
% Parameter überschrieben, dann wird die ausgehende Verbindung wie bei |
| 6673 |
% einer elektrischen Komponente behandelt. |
| 6674 |
% \fi |
| 6675 |
% \iffalse |
| 6676 |
%<*ignore> |
| 6677 |
% \fi |
| 6678 |
\begin{LTXexample} |
| 6679 |
\begin{pspicture}(3,1.2) |
| 6680 |
\optdetector[position=0.5](0,0)(1.5,1){detector} |
| 6681 |
\end{pspicture} |
| 6682 |
\end{LTXexample} |
| 6683 |
% \iffalse |
| 6684 |
%</ignore> |
| 6685 |
% \fi |
| 6686 |
% |
| 6687 |
% \begin{optionlist} |
| 6688 |
% \optitem[0.8]{detsize}{\prm{num} or \prm{width} \prm{height}} |
| 6689 |
% \ifGERMAN |
| 6690 |
% Wenn eine einzelne Zahl angegeben ist, dann ist das die Seitenlänge |
| 6691 |
% (\opt{diode}) bzw. der Durchmesser (\opt{round}) des Detektors. Werden zwei |
| 6692 |
% Zahlen angegeben, so sind das Breite und Höhe des Detektors. Beachten Sie, |
| 6693 |
% dass \opt{detsize=1} und \opt{detsize=1 1} für \opt{dettype=round} nicht dasselbe ist. |
| 6694 |
% \fi |
| 6695 |
% \ifENGLISH |
| 6696 |
% If a single number is given it is the side length (\opt{diode}) or the |
| 6697 |
% diameter (\opt{round}) of the detector. Two numbers define the width and |
| 6698 |
% height of the detector. Note, that \opt{detsize=1} and \opt{detsize=1 1} are |
| 6699 |
% not equivalent for \opt{dettype=round}. |
| 6700 |
% \fi |
| 6701 |
% |
| 6702 |
% \choitem[round]{dettype}{round, diode} |
| 6703 |
% \ifGERMAN |
| 6704 |
% Dieser Parameter bestimmt den Typ und damit das Aussehen des Detektors. |
| 6705 |
% \fi |
| 6706 |
% \ifENGLISH |
| 6707 |
% This parameter selects between different types of detectors. |
| 6708 |
% \fi |
| 6709 |
% \iffalse |
| 6710 |
%<*ignore> |
| 6711 |
% \fi |
| 6712 |
\begin{LTXexample}[morekeywords={[21]{dettype}}] |
| 6713 |
\begin{pspicture}(3,1.5) |
| 6714 |
\optdetector[beam, dettype=diode](0,0)(1.5,1){detector} |
| 6715 |
\end{pspicture} |
| 6716 |
\end{LTXexample} |
| 6717 |
% \iffalse |
| 6718 |
%</ignore> |
| 6719 |
% \fi |
| 6720 |
% \end{optionlist} |
| 6721 |
% |
| 6722 |
% \begin{stylelist} |
| 6723 |
% \styleitem{DetectorStyle} |
| 6724 |
% \ifGERMAN |
| 6725 |
% Der Stil der Diode für \Lkeyword{dettype}\opt{=diode}. |
| 6726 |
% \fi |
| 6727 |
% \ifENGLISH |
| 6728 |
% The style of the diode for \Lkeyword{dettype}\opt{=diode}. |
| 6729 |
% \fi |
| 6730 |
% \iffalse |
| 6731 |
%<*ignore> |
| 6732 |
% \fi |
| 6733 |
\begin{LTXexample} |
| 6734 |
\begin{pspicture}(3,1.5) |
| 6735 |
\newpsstyle{OptComp}{linewidth=3\pslinewidth} |
| 6736 |
\newpsstyle{DetectorStyle}{linewidth=0.333\pslinewidth} |
| 6737 |
\optdetector[dettype=diode](0,1)(2,1) |
| 6738 |
\end{pspicture} |
| 6739 |
\end{LTXexample} |
| 6740 |
% \iffalse |
| 6741 |
%</ignore> |
| 6742 |
% \fi |
| 6743 |
% \end{stylelist} |
| 6744 |
% |
| 6745 |
% |
| 6746 |
% \ifGERMAN\chapter{Spezielle Knoten}\fi |
| 6747 |
% \ifENGLISH\chapter{Special nodes}\fi |
| 6748 |
% \label{sec:objnodes} |
| 6749 |
% |
| 6750 |
% \ifGERMAN |
| 6751 |
% Jedes \nxLPack{pst-optexp}-Objekt stellt mehrere spezielle Knoten zur |
| 6752 |
% Verfügung, die mit dessen Geometrie und Positionierung zusammenhängen. Diese |
| 6753 |
% Knoten stehen für weitere Verwendung zur Verfügung. |
| 6754 |
% |
| 6755 |
% Sie sollten immer die dafür vorgesehenen Makros verwenden um auf die |
| 6756 |
% Knotennamen zuzugreifen. |
| 6757 |
% \fi |
| 6758 |
% \ifENGLISH |
| 6759 |
% Every \nxLPack{pst-optexp} object of an experimental setup provides |
| 6760 |
% several special nodes which are related to its geometry and |
| 6761 |
% positioning. They can be accessed and used for related positioning and |
| 6762 |
% drawing. |
| 6763 |
% |
| 6764 |
% You should always use the dedicated macros to access these node names. |
| 6765 |
% \fi |
| 6766 |
% \begin{ltxsyntax} |
| 6767 |
% \cmditem{oenode}{node}{comp} |
| 6768 |
% |
| 6769 |
% \ifGERMAN |
| 6770 |
% Das ist das grundlegende Makro mit dem auf die Knotennamen einer Komponente |
| 6771 |
% zugegriffen werden kann. Das erste Argument \prm{node} ist der Bezeichner des |
| 6772 |
% angeforderten Knotens. Das zweite Argument \prm{comp} ist der Name der |
| 6773 |
% Komponente (gemäß \prettyref{sec:namingobj}). Ist dieses leer so wird das |
| 6774 |
% zuletzt definierte Objekt verwendet. |
| 6775 |
% |
| 6776 |
% Für viele der Knoten wird ein eigenes Makro bereitgestellt, das Sie dann auch |
| 6777 |
% verwenden sollten, da sich die Namenskonventionen ändern könnten. Die Makros |
| 6778 |
% stellen sicher, dass Sie immer die passenden Knotennamen erhalten. Daher sind |
| 6779 |
% die verfügbaren Bezeichner auch nicht aufgelistet. |
| 6780 |
% \fi |
| 6781 |
% \ifENGLISH |
| 6782 |
% This is the basic command to access any node associated with a certain |
| 6783 |
% component. The first argument \prm{node} is the identifier of the requested |
| 6784 |
% node. The second argument \prm{comp} is the name of the target component |
| 6785 |
% (according to \prettyref{sec:namingobj}). If left empty, it uses the last |
| 6786 |
% component defined. |
| 6787 |
% |
| 6788 |
% For most special nodes an appropriate macro is provided, which you are |
| 6789 |
% strongly advised to use, because the naming conventions may change. Using the |
| 6790 |
% macros makes sure, that you always get the correct node names. Therefore, the |
| 6791 |
% available identifiers are not listed explicitely. |
| 6792 |
% \fi |
| 6793 |
% \end{ltxsyntax} |
| 6794 |
% |
| 6795 |
% \begin{optionlist} |
| 6796 |
% \boolitem[false]{showoptdots} |
| 6797 |
% \ifGERMAN |
| 6798 |
% Markiert einige der speziellen Komponentenknoten: die schwarzen Punkte sind |
| 6799 |
% die normalen und die schwarzen Kreuze die transformierten Referenzknoten |
| 6800 |
% (\prettyref{sec:refnode}), der rote Punkt ist der Mittelpunktknoten |
| 6801 |
% (\prettyref{sec:centernode}) und das rote Kreuz der Beschriftungsknoten |
| 6802 |
% (\prettyref{sec:labelnode}). |
| 6803 |
% \fi |
| 6804 |
% \ifENGLISH |
| 6805 |
% Draw some special component nodes for debugging: The black points are the |
| 6806 |
% normal and the black crosses are the transformed reference nodes |
| 6807 |
% (\prettyref{sec:refnode}), the red point is the center node |
| 6808 |
% (\prettyref{sec:centernode}), and the red cross is the label node |
| 6809 |
% (\prettyref{sec:labelnode}). |
| 6810 |
% \fi |
| 6811 |
% \iffalse |
| 6812 |
%<*ignore> |
| 6813 |
% \fi |
| 6814 |
\begin{LTXexample} |
| 6815 |
\begin{pspicture}(3,2) |
| 6816 |
\mirror[showoptdots, angle=10, beam](0,1)(1.9,1)(1.9,0) |
| 6817 |
\end{pspicture} |
| 6818 |
\end{LTXexample} |
| 6819 |
% \iffalse |
| 6820 |
%</ignore> |
| 6821 |
% \fi |
| 6822 |
% \end{optionlist} |
| 6823 |
% |
| 6824 |
% \ifGERMAN\section{Komponenten-Bezeichner}\fi |
| 6825 |
% \ifENGLISH\section{Component identifiers}\fi |
| 6826 |
% \label{sec:namingobj} |
| 6827 |
% |
| 6828 |
% \ifGERMAN |
| 6829 |
% Alle Komponenten einer Aufbauskizze werden in Reihenfolge ihrer Definition im |
| 6830 |
% Code aufsteigend nummeriert, angefangen bei \opt{1}. Die Komponenten und deren |
| 6831 |
% Spezialknoten können immer über diese Nummer (ID) referenziert werden. |
| 6832 |
% |
| 6833 |
% IDs können auch relativ zur aktuellen ID über die Syntax |
| 6834 |
% \opt{<}\prm{num} angegeben werden: \opt{<1} ist die vorletzte ID, |
| 6835 |
% \opt{<2} die vorvorletzte ID usw. Die vorletzte ID kann abgekürzt auch |
| 6836 |
% mit \opt{<} erhalten werden, und die aktuelle ID mit \opt{<0}, was |
| 6837 |
% äquivalent zu einem leeren Parameter ist. |
| 6838 |
% \fi |
| 6839 |
% \ifENGLISH |
| 6840 |
% All components of a setup drawing are numbered automatically in increasing |
| 6841 |
% order according to their definition in the code, starting with \opt{1}. The |
| 6842 |
% components as well as their special nodes can always be accessed by this |
| 6843 |
% number (ID). |
| 6844 |
% |
| 6845 |
% ID specifications relative to the current ID can be used with the |
| 6846 |
% syntax \opt{<}\prm{num}: \opt{<1} is the previous ID, \opt{<2} is the |
| 6847 |
% current ID minus two etc. The previous ID can also be accessed by only |
| 6848 |
% \opt{<}, and the current ID is \opt{<0}, which is equivalent to an |
| 6849 |
% empty parameter. |
| 6850 |
% \fi |
| 6851 |
% |
| 6852 |
% \begin{optionlist} |
| 6853 |
% \valitem{compname}{string} |
| 6854 |
% \ifGERMAN |
| 6855 |
% Weist einer Komponente einen Bezeichner zu. Die Komponente kann nun sowohl |
| 6856 |
% über diesen Bezeichner als auch über die ID referenziert werden. Dieser |
| 6857 |
% Parameter kann nur im optionalen Argument einer \nxLPack{pst-optexp} |
| 6858 |
% Komponente verwendet werden. Der Bezeichner sollte innerhalb einer |
| 6859 |
% \Lenv*{pspicture}-Umgebung eindeutig sein. |
| 6860 |
% \fi |
| 6861 |
% \ifENGLISH |
| 6862 |
% Assigns a name identifier to a component, which can then be |
| 6863 |
% referenced both by this name and by its ID. The parameter can be |
| 6864 |
% assigned only locally, i.e. in the optional argument of a |
| 6865 |
% \nxLPack{pst-optexp} component, and should be unique within one |
| 6866 |
% \Lenv*{pspicture} environment. |
| 6867 |
% \fi |
| 6868 |
% \end{optionlist} |
| 6869 |
% |
| 6870 |
% \ifGERMAN Beispiele für unterschiedliche Methoden auf ein und |
| 6871 |
% dieselbe Komponente zuzugreifen. |
| 6872 |
% \fi |
| 6873 |
% \ifENGLISH Examples for different methods to access the same |
| 6874 |
% component. |
| 6875 |
% \fi |
| 6876 |
% |
| 6877 |
% \iffalse |
| 6878 |
%<*ignore> |
| 6879 |
% \fi |
| 6880 |
\ifGERMAN |
| 6881 |
\begin{LTXexample} |
| 6882 |
\begin{pspicture}(2,2) |
| 6883 |
\optbox[compname=MyBox](0,1)(2,2) |
| 6884 |
\psdot[linecolor=red](\oenodeIn{MyBox}) % Verwende den Namen |
| 6885 |
\psdot[linecolor=blue](\oenodeOut{1}) % Verwende die ID |
| 6886 |
\psdot[linecolor=green](\oenodeCenter{})% Nimm die letzte Komponente |
| 6887 |
\end{pspicture} |
| 6888 |
\end{LTXexample} |
| 6889 |
\fi\ifENGLISH |
| 6890 |
\begin{LTXexample} |
| 6891 |
\begin{pspicture}(2,2) |
| 6892 |
\optbox[compname=MyBox](0,1)(2,2) |
| 6893 |
\psdot[linecolor=red](\oenodeIn{MyBox})% use the compname |
| 6894 |
\psdot[linecolor=blue](\oenodeOut{1}) % use the ID |
| 6895 |
\psdot[linecolor=green](\oenodeCenter{}) % the last component |
| 6896 |
\end{pspicture} |
| 6897 |
\end{LTXexample} |
| 6898 |
\fi |
| 6899 |
% \iffalse |
| 6900 |
%</ignore> |
| 6901 |
% \fi |
| 6902 |
% |
| 6903 |
% \ifGERMAN |
| 6904 |
% Die Verwendung von relativen IDs ist u.a. nützlich, um eine neue |
| 6905 |
% Komponente relativ zur vorangegangenen zu definieren. Die Verwendung |
| 6906 |
% von z.B. \Lcs{oenodeOut}\opt{\{\}} in den Referenzknoten ist nicht |
| 6907 |
% möglich, da hiermit zum Zeitpunkt der Auswertung der Koordinaten schon |
| 6908 |
% auf die neue, nicht fertige Komponente referenziert wird. Ein Aufruf |
| 6909 |
% der Art \lstinline!\optbox(\oenodeOut{})(B)! ist daher nicht möglich, |
| 6910 |
% und führt zu einem Fehler. Mit relativen IDs kann das allerdings mit |
| 6911 |
% \lstinline!\optbox(\oenodeOut{<})(B)! erreicht werden: |
| 6912 |
% \fi |
| 6913 |
% \ifENGLISH |
| 6914 |
% Using relative IDs can be very handy to define a component relative to |
| 6915 |
% the previous one. It is not possible to use |
| 6916 |
% e.g. \Lcs{oenodeOut}\opt{\{\}} as reference node, because at the time |
| 6917 |
% these coordinates are evaluated, they reference to the new, not yet |
| 6918 |
% defined component. A call like \lstinline!\optbox(\oenodeOut{})(B)! |
| 6919 |
% is, therefore, not possible and gives an error. With relative IDs one |
| 6920 |
% can achieve that with \lstinline!\optbox(\oenodeOut{<})(B)!: |
| 6921 |
% \fi |
| 6922 |
% \iffalse |
| 6923 |
%<*ignore> |
| 6924 |
% \fi |
| 6925 |
\begin{LTXexample} |
| 6926 |
\begin{pspicture}(4,2) |
| 6927 |
\psset{optboxsize=0.4 0.8, abspos=0.5} |
| 6928 |
\optbox(0,1)(4,1) |
| 6929 |
\multido{}{3}{\optbox(\oenodeOut{<})(4,1)} |
| 6930 |
\end{pspicture} |
| 6931 |
\end{LTXexample} |
| 6932 |
% \iffalse |
| 6933 |
%</ignore> |
| 6934 |
% \fi |
| 6935 |
% |
| 6936 |
% \ifGERMAN\section{Referenzknoten}\fi |
| 6937 |
% \ifENGLISH\section{Reference nodes}\fi |
| 6938 |
% \label{sec:refnode} |
| 6939 |
% |
| 6940 |
% \begin{ltxsyntax} |
| 6941 |
% \cmditem{oenodeRefA}{comp} |
| 6942 |
% \cmditem{oenodeRefB}{comp} |
| 6943 |
% |
| 6944 |
% \ifGERMAN |
| 6945 |
% Die Eingangs- und Ausgangs-Referenzknoten. |
| 6946 |
% |
| 6947 |
% Das sind die ursprünglichen Knoten, die für die Positionierung der Komponente |
| 6948 |
% benutzt wurden, \nxLcs{oenodeRefA} ist der erste und \nxLcs{oenodeRefB} der |
| 6949 |
% letzte Knoten. Diese Zuordnung ist nicht gültig für Faserkoppler |
| 6950 |
% (\ref{sec:coupler-refnodes}) und Zirkulatoren (\compref{optcirculator}). |
| 6951 |
% \fi |
| 6952 |
% \ifENGLISH |
| 6953 |
% The input and output reference nodes. |
| 6954 |
% |
| 6955 |
% These are the original nodes which were used for the component positioning, |
| 6956 |
% \nxLcs{oenodeRefA} is the first and \nxLcs{oenodeRefB} the last node. This |
| 6957 |
% definition is not valid couplers (\ref{sec:coupler-refnodes}) and circulators |
| 6958 |
% (\compref{optcirculator}). |
| 6959 |
% \fi |
| 6960 |
% \iffalse |
| 6961 |
%<*ignore> |
| 6962 |
% \fi |
| 6963 |
\begin{LTXexample}[pos=t, linerange={1-3, 4-7}] |
| 6964 |
\begin{pspicture}(5,1) |
| 6965 |
\pnodes(0.5,0.5){A}(4.5,0.5){B} |
| 6966 |
\optbox(A)(B) |
| 6967 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 6968 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 6969 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 6970 |
\end{pspicture} |
| 6971 |
\end{LTXexample} |
| 6972 |
% \iffalse |
| 6973 |
%</ignore> |
| 6974 |
% \fi |
| 6975 |
% |
| 6976 |
% \cmditem{oenodeTrefA}{comp} |
| 6977 |
% \cmditem{oenodeTrefB}{comp} |
| 6978 |
% |
| 6979 |
% \ifGERMAN |
| 6980 |
% Die transformierten Eingangs- und Ausgangs-Referenzknoten. |
| 6981 |
% |
| 6982 |
% Das sind die Referenzknoten nachdem sie zusammen mit der Komponente gemäß |
| 6983 |
% der \Lkeyword{compshift} und \Lkeyword{angle} Parameter transformiert wurden. |
| 6984 |
% \fi |
| 6985 |
% \ifENGLISH |
| 6986 |
% The transformed input and output reference nodes. |
| 6987 |
% |
| 6988 |
% These are the input and output reference nodes which are transformed |
| 6989 |
% together with the component according to the \Lkeyword{compshift} and |
| 6990 |
% \Lkeyword{angle} parameters. |
| 6991 |
% \fi |
| 6992 |
% \iffalse |
| 6993 |
%<*ignore> |
| 6994 |
% \fi |
| 6995 |
\begin{LTXexample}[pos=t, linerange={1-3,5-9}] |
| 6996 |
\begin{pspicture}(5,1.8) |
| 6997 |
\pnodes(0.5,0.5){A}(4.5,0.5){B} |
| 6998 |
\optbox[compshift=0.5, angle=10](A)(B) |
| 6999 |
\psline[style=Refline](\oenodeTrefA{})(\oenodeTrefB{}) |
| 7000 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 7001 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 7002 |
\psdot(\oenodeTrefA{})\uput[90](\oenodeTrefA{}){TrefA} |
| 7003 |
\psdot(\oenodeTrefB{})\uput[90](\oenodeTrefB{}){TrefB} |
| 7004 |
\end{pspicture} |
| 7005 |
\end{LTXexample} |
| 7006 |
% \iffalse |
| 7007 |
%</ignore> |
| 7008 |
% \fi |
| 7009 |
% \end{ltxsyntax} |
| 7010 |
% |
| 7011 |
% \ifGERMAN\section{Mittelpunktknoten}\fi |
| 7012 |
% \ifENGLISH\section{Center node}\fi |
| 7013 |
% \label{sec:centernode} |
| 7014 |
% |
| 7015 |
% \begin{ltxsyntax} |
| 7016 |
% \cmditem{oenodeCenter}{comp} |
| 7017 |
% |
| 7018 |
% \ifGERMAN |
| 7019 |
% Dieser Knoten liegt, bis auf wenige Ausnahmen, wie |
| 7020 |
% z.B. \Lcomp{optdetector} und \Lcomp{optcoupler} (siehe unten), im |
| 7021 |
% Mittelpunkt der Komponente. |
| 7022 |
% \fi |
| 7023 |
% \ifENGLISH |
| 7024 |
% This node lays, except for a few components like |
| 7025 |
% e.g. \Lcomp{optcirculator} and \Lcomp{optcoupler} (see below), in the |
| 7026 |
% center of the component. |
| 7027 |
% \fi |
| 7028 |
% \iffalse |
| 7029 |
%<*ignore> |
| 7030 |
% \fi |
| 7031 |
\begin{LTXexample}[linerange={1-2, 5-5, 8-8}] |
| 7032 |
\begin{pspicture}(3,2) |
| 7033 |
\optbox(0,0.5)(3,0.5) |
| 7034 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 7035 |
\psdot(\oenodeCenter{}) |
| 7036 |
\optdetector(0,1.5)(2.5,1.5) |
| 7037 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 7038 |
\psdot(\oenodeCenter{}) |
| 7039 |
\end{pspicture} |
| 7040 |
\end{LTXexample} |
| 7041 |
% \iffalse |
| 7042 |
%</ignore> |
| 7043 |
% \fi |
| 7044 |
% |
| 7045 |
% \ifGERMAN Bei \Lcomp{optcoupler} hängt die Position der Komponentenmitte |
| 7046 |
% von den \Lkeyword{coupleralign} Einstellungen ab. |
| 7047 |
% \fi |
| 7048 |
% \ifENGLISH For \Lcomp{optcoupler} the position of the component center |
| 7049 |
% depends on the \Lkeyword{coupleralign} settings. |
| 7050 |
% \fi |
| 7051 |
% \iffalse |
| 7052 |
%<*ignore> |
| 7053 |
% \fi |
| 7054 |
\begin{LTXexample} |
| 7055 |
\begin{pspicture}(0,0.3)(3,3) |
| 7056 |
\psset[optexp]{couplersize=0.6 0.4, couplersep=0.2, couplertype=rectangle} |
| 7057 |
\optcoupler(0,3)(0,2)(3,3)(3,2) |
| 7058 |
\psdot(\oenodeCenter{}) |
| 7059 |
\optcoupler[coupleralign=b](0,1.5)(0,0.5)(3,1.5)(3,0.5) |
| 7060 |
\psdot(\oenodeCenter{}) |
| 7061 |
\end{pspicture} |
| 7062 |
\end{LTXexample} |
| 7063 |
% \iffalse |
| 7064 |
%</ignore> |
| 7065 |
% \fi |
| 7066 |
% \end{ltxsyntax} |
| 7067 |
% |
| 7068 |
% \ifGERMAN\section{Beschriftungsknoten}\fi |
| 7069 |
% \ifENGLISH\section{Label node}\fi |
| 7070 |
% \label{sec:labelnode} |
| 7071 |
% |
| 7072 |
% \begin{ltxsyntax} |
| 7073 |
% \cmditem{oenodeLabel}{comp} |
| 7074 |
% |
| 7075 |
% \ifGERMAN |
| 7076 |
% Auf diesen Knoten wird die Beschriftung platziert. Der Knoten ist auch |
| 7077 |
% verfügbar wenn keine Beschriftung angegeben wurde. Für |
| 7078 |
% \Lkeyword{labeloffset}\opt{=0} ist dieser Knoten |
| 7079 |
% identisch mit dem Mittelpunktsknoten (\prettyref{sec:centernode}). |
| 7080 |
% \fi |
| 7081 |
% \ifENGLISH |
| 7082 |
% The component label is placed at this node. It is also available |
| 7083 |
% if no label was specified. The label node is identical with the center |
| 7084 |
% node for \Lkeyword{labeloffset}\opt{=0}. |
| 7085 |
% \fi |
| 7086 |
% \iffalse |
| 7087 |
%<*ignore> |
| 7088 |
% \fi |
| 7089 |
\begin{LTXexample}[linerange={1-2,5-5}] |
| 7090 |
\begin{pspicture}(3,1.5) |
| 7091 |
\optbox(0,1)(3,1) |
| 7092 |
\psline[style=Refline](\oenodeTrefA{})(\oenodeTrefB{}) |
| 7093 |
\psdot(\oenodeLabel{}) |
| 7094 |
\end{pspicture} |
| 7095 |
\end{LTXexample} |
| 7096 |
% \iffalse |
| 7097 |
%</ignore> |
| 7098 |
% \fi |
| 7099 |
% \end{ltxsyntax} |
| 7100 |
% |
| 7101 |
% \ifGERMAN\section{Externe Knoten}\fi |
| 7102 |
% \ifENGLISH\section{External nodes}\fi |
| 7103 |
% \label{sec:extnode} |
| 7104 |
% |
| 7105 |
% \begin{ltxsyntax} |
| 7106 |
% \cmditem{oenodeExt}{comp} |
| 7107 |
% |
| 7108 |
% \ifGERMAN |
| 7109 |
% Ein externer Knoten kann an unterschiedliche Positionen entlang des |
| 7110 |
% Komponentenrandes gesetzt werden. Dieser wird nur für den externen Zugriff |
| 7111 |
% definiert, und beeinflusst in keiner Weise die Komponente. |
| 7112 |
% \fi |
| 7113 |
% \ifENGLISH |
| 7114 |
% An external node can be placed at different positions along the component |
| 7115 |
% boundary. It gets defined only for external usage and does not affect the |
| 7116 |
% component in any way. |
| 7117 |
% \fi |
| 7118 |
% \end{ltxsyntax} |
| 7119 |
% \begin{optionlist} |
| 7120 |
% \valitem{extnode}{refpoint} |
| 7121 |
% \ifGERMAN |
| 7122 |
% Bestimmt die Position des externen Knotens. \refpointexplanation Nicht |
| 7123 |
% jede Komponente unterstützt alle möglichen Kombinationen, die möglichen |
| 7124 |
% Positionen jeder Komponente sind in \prettyref{sec:overview-extnode} |
| 7125 |
% zusammengefasst. |
| 7126 |
% \fi |
| 7127 |
% \ifENGLISH |
| 7128 |
% Set the position of the external node. \refpointexplanation Not all |
| 7129 |
% components support any possible combination. The allowed positions of each |
| 7130 |
% component are listed in \prettyref{sec:overview-extnode}. |
| 7131 |
% \fi |
| 7132 |
% |
| 7133 |
% \begin{pspicture}(6,2.5) |
| 7134 |
% \addtopsstyle{Beam}{beaminside=false, arrows=->, arrowinset=0, arrowscale=1.5} |
| 7135 |
% \psset{optboxsize=2.5 1.5}\ttfamily |
| 7136 |
% \pnodes(0,1.25){A}(6,1.25){B} |
| 7137 |
% \optbox[beam, extnode=tl](A)(B) |
| 7138 |
% \psdot(\oenodeExt{})\uput[135](\oenodeExt{}){tl} |
| 7139 |
% \backlayer{% |
| 7140 |
% \optbox[extnode=t](A)(B)\psdot(\oenodeExt{})\uput[90](\oenodeExt{}){t} |
| 7141 |
% \optbox[extnode=tr](A)(B)\psdot(\oenodeExt{})\uput[90](\oenodeExt{}){tr} |
| 7142 |
% \optbox[extnode=r](A)(B)\psdot(\oenodeExt{})\uput[45](\oenodeExt{}){r} |
| 7143 |
% \optbox[extnode=br](A)(B)\psdot(\oenodeExt{})\uput[-90](\oenodeExt{}){br} |
| 7144 |
% \optbox[extnode=b](A)(B)\psdot(\oenodeExt{})\uput[-90](\oenodeExt{}){b} |
| 7145 |
% \optbox[extnode=bl](A)(B)\psdot(\oenodeExt{})\uput[-90](\oenodeExt{}){bl} |
| 7146 |
% \optbox[extnode=l](A)(B)\psdot(\oenodeExt{})\uput[135](\oenodeExt{}){l} |
| 7147 |
% \optbox[extnode=c](A)(B)\psdot(\oenodeExt{})\uput[180](\oenodeExt{}){c} |
| 7148 |
% } |
| 7149 |
% \end{pspicture} |
| 7150 |
% |
| 7151 |
% \choitem[abs]{extnodealign}{rel,relative,abs,absolute} |
| 7152 |
% \ifGERMAN |
| 7153 |
% Die Bezeichnung von «oben» (\opt{t}) und den anderen Positionierungsparametern |
| 7154 |
% von \Lkeyword{extnode} können absolut oder relativ zur Komponente betrachtet |
| 7155 |
% werden. |
| 7156 |
% |
| 7157 |
% In dem folgenden Beispiel ist der externe Knoten immer «oben rechts» |
| 7158 |
% (\opt{tr}) platziert, unabhängig von der Reihenfolge der Referenzknoten |
| 7159 |
% (\opt{extnodealign=abs}). Das Verhalten ist identisch zu |
| 7160 |
% \Lkeyword{labelref}\opt{=relative} für die Ausrichtung der Beschriftung. |
| 7161 |
% \fi |
| 7162 |
% \ifENGLISH |
| 7163 |
% The definition of «top» (\opt{t}) and the other \Lkeyword{extnode} refpoint |
| 7164 |
% parameters can be absolute or relative to the component. |
| 7165 |
% |
| 7166 |
% In the following example the external node is always placed «top right» |
| 7167 |
% independent of the actual order of the reference nodes |
| 7168 |
% (\opt{extnodealign=abs}). The behaviour is identical to the label rotation for |
| 7169 |
% \Lkeyword{labelref}\opt{=relative}. |
| 7170 |
% \fi |
| 7171 |
% \iffalse |
| 7172 |
%<*ignore> |
| 7173 |
% \fi |
| 7174 |
\begin{LTXexample}[morekeywords={[21]extnodealign}] |
| 7175 |
\begin{pspicture}(-2,-2)(2,2) |
| 7176 |
\psset{endbox, optboxsize=1 0.6, dotscale=1.5} |
| 7177 |
\psset{extnodealign=abs, extnode=tr} |
| 7178 |
\multido{\i=0+45}{8}{% |
| 7179 |
\optbox[innerlabel](0,0)(1;\i){\i} |
| 7180 |
\psdot(\oenodeExt{}) |
| 7181 |
}% |
| 7182 |
\end{pspicture} |
| 7183 |
\end{LTXexample} |
| 7184 |
\begin{LTXexample}[morekeywords={[21]extnodealign}] |
| 7185 |
\begin{pspicture}(-2.2,-2.2)(2.2,2.2) |
| 7186 |
\psset{dotscale=1.5, mirrortype=extended, mirrordepth=0.5, label=0.25 . . relative, extnodealign=abs, extnode=tr} |
| 7187 |
\newpsstyle{ExtendedMirror}{} |
| 7188 |
\multido{\i=0+45,\ii=-45+45}{8}{% |
| 7189 |
\mirror(0,0)(1.5;\i)(2.1212;\ii){\i} |
| 7190 |
\psdot(\oenodeExt{}) |
| 7191 |
}% |
| 7192 |
\end{pspicture} |
| 7193 |
\end{LTXexample} |
| 7194 |
% \iffalse |
| 7195 |
%</ignore> |
| 7196 |
% \fi |
| 7197 |
% |
| 7198 |
% \ifGERMAN |
| 7199 |
% In dem darauffolgenden Beispiel bezieht sich die Positionierung relativ zur |
| 7200 |
% Verbindung zwischen Eingangs- und Ausgangsreferenzknoten |
| 7201 |
% (\opt{extnodealign=rel}). |
| 7202 |
% \fi |
| 7203 |
% \ifENGLISH |
| 7204 |
% In the next example the position is relative to the order of input and output |
| 7205 |
% reference node (\opt{extnodealign=rel}). |
| 7206 |
% \fi |
| 7207 |
% \iffalse |
| 7208 |
%<*ignore> |
| 7209 |
% \fi |
| 7210 |
\begin{LTXexample}[morekeywords={[21]extnodealign}] |
| 7211 |
\begin{pspicture}(-2,-2)(2,2) |
| 7212 |
\psset{endbox, optboxsize=1 0.6, dotscale=1.5} |
| 7213 |
\psset{extnodealign=rel, extnode=tr} |
| 7214 |
\multido{\i=0+45}{8}{% |
| 7215 |
\optbox[innerlabel](0,0)(1;\i){\i} |
| 7216 |
\psdot(\oenodeExt{}) |
| 7217 |
}% |
| 7218 |
\end{pspicture} |
| 7219 |
\end{LTXexample} |
| 7220 |
\begin{LTXexample}[morekeywords={[21]extnodealign}] |
| 7221 |
\begin{pspicture}(-2.2,-2.2)(2.2,2.2) |
| 7222 |
\psset{dotscale=1.5, mirrortype=extended, mirrordepth=0.5, label=0.25 . . relative, extnodealign=abs, extnode=tr} |
| 7223 |
\newpsstyle{ExtendedMirror}{} |
| 7224 |
\multido{\i=0+45,\ii=-45+45}{8}{% |
| 7225 |
\mirror(0,0)(1.5;\i)(2.1212;\ii){\i} |
| 7226 |
\psdot(\oenodeExt{}) |
| 7227 |
}% |
| 7228 |
\end{pspicture} |
| 7229 |
\end{LTXexample} |
| 7230 |
% \iffalse |
| 7231 |
%</ignore> |
| 7232 |
% \fi |
| 7233 |
% |
| 7234 |
% \valitem{extnodes}{list} |
| 7235 |
% \ifGERMAN Erlaubt die Definition mehrerer externer Knoten, \prm{list} |
| 7236 |
% ist eine Liste von \prm{refpoint}, wie sie von \Lkeyword{extnode} |
| 7237 |
% verwendet werden. Der erste Knoten kann wie gewohnt mit |
| 7238 |
% \Lcs{oenodeExt} angesprochen werden (ist äquivalent zu |
| 7239 |
% \Lcs{oenode}{\{Ext\}} und \Lcs{oenode}{\{Ext1\}}). Für alle weiteren |
| 7240 |
% Knoten muss \Lcs{oenode} mit den Knotenbezeichnungen |
| 7241 |
% \opt{Ext}\prm{num} verwendet werden: \Lcs{oenode}\opt{\{Ext1\}} für den |
| 7242 |
% ersten, \Lcs{oenode}{\{Ext2\}} für den zweiten usw. |
| 7243 |
% \fi |
| 7244 |
% \ifENGLISH |
| 7245 |
% Define multiple external nodes, with their \prm{refpoints} given in |
| 7246 |
% the \prm{list} and separated by commas. The first node can be accessed |
| 7247 |
% as usual with \Lcs{oenodeExt} (is equivalent to \Lcs{oenode}{\{Ext\}} |
| 7248 |
% and \Lcs{oenode}{\{Ext1\}}). All additional nodes must be accessed |
| 7249 |
% with \Lcs{oenode} and the node label \opt{Ext}\prm{num}: |
| 7250 |
% \Lcs{oenode}{\{Ext1\}} for the first one, \Lcs{oenode}{\{Ext2\}} for |
| 7251 |
% the second, etc. |
| 7252 |
% \fi |
| 7253 |
% \iffalse |
| 7254 |
%<*ignore> |
| 7255 |
% \fi |
| 7256 |
\begin{LTXexample}[morekeywords={[21]extnodes}, linerange={1-3,5-5}] |
| 7257 |
\begin{pspicture}(3,2) |
| 7258 |
\optbox[extnodes={tl,tr,br,bl}](0,1)(3,1) |
| 7259 |
\multido{\i=1+1}{4}{\psdot[dotstyle=o](\oenode{Ext\i}{})}% |
| 7260 |
\multido{\i=1+1,\ii=135+-90}{4}{\uput[\ii](\oenode{Ext\i}{}){Ext\i}}% |
| 7261 |
\end{pspicture} |
| 7262 |
\end{LTXexample} |
| 7263 |
% \iffalse |
| 7264 |
%</ignore> |
| 7265 |
% \fi |
| 7266 |
% \end{optionlist} |
| 7267 |
% |
| 7268 |
% \ifGERMAN\section{Grenzflächenknoten}\fi |
| 7269 |
% \ifENGLISH\section{Interface nodes}\fi |
| 7270 |
% \label{sec:ifcnode} |
| 7271 |
% |
| 7272 |
% \begin{ltxsyntax} |
| 7273 |
% \cmditem{oenodeIfc}{num}{comp} |
| 7274 |
% |
| 7275 |
% \ifGERMAN |
| 7276 |
% Der Grenzflächenknoten \prm{num}, wobei \prm{num} eine positive |
| 7277 |
% Ganzzahl oder der Buchstabe \opt{N} ist. Der letzte Knoten ist immer |
| 7278 |
% \opt{N}, kann aber auch über die entsprechende Zahl angesprochen |
| 7279 |
% werden. |
| 7280 |
% \fi |
| 7281 |
% \ifENGLISH |
| 7282 |
% The interface node \prm{num}, where the number is a positive integer |
| 7283 |
% or the character \opt{N}. The last node is always defined as \opt{N} |
| 7284 |
% but can also be accessed via its number. |
| 7285 |
% \fi |
| 7286 |
% |
| 7287 |
% \cmditem{oenodeIn}{comp} |
| 7288 |
% |
| 7289 |
% \ifGERMAN |
| 7290 |
% Der Knoten \prm{1} ist der Eingangsknoten und sollte immer über |
| 7291 |
% \nxLcs{oenodeIn} angesprochen werden. |
| 7292 |
% \fi |
| 7293 |
% \ifENGLISH |
| 7294 |
% The interface node \prm{1} is the input node and should always be accessed |
| 7295 |
% via \nxLcs{oenodeIn}. |
| 7296 |
% \fi |
| 7297 |
% |
| 7298 |
% \cmditem{oenodeOut}{comp} |
| 7299 |
% |
| 7300 |
% \ifGERMAN |
| 7301 |
% Der Knoten \opt{N} ist der Ausgangsknoten und sollte |
| 7302 |
% immer über \nxLcs{oenodeOut} angesprochen werden. |
| 7303 |
% \fi |
| 7304 |
% \ifENGLISH |
| 7305 |
% The interface node \prm{N} is the output node and should always be accessed |
| 7306 |
% via \nxLcs{oenodeOut}. |
| 7307 |
% \fi |
| 7308 |
% |
| 7309 |
% \ifGERMAN |
| 7310 |
% «Eingang» und «Ausgang» können nur anhand einer relativen Orientierung |
| 7311 |
% definiert werden. Per Definition ist der Eingangsknoten derjenige zu dem ein |
| 7312 |
% Lichtstrahl ausgehend vom Referenzknoten \Lcs{oenodeRefA} verläuft. Analog |
| 7313 |
% dazu ist die Definition ds Ausgangsknotens. Diese Bezeichnung kann nur für |
| 7314 |
% Faserkoppler (siehe \prettyref{sec:coupler-nodes}) und Strahlteiler |
| 7315 |
% (\compref{beamsplitter}) nicht angewendet werden. |
| 7316 |
% |
| 7317 |
% \nxLcs{oenodeIn} ist äquivalent zu \nxLcs{oenodeIfc\{1\}} und |
| 7318 |
% \nxLcs{oenodeOut} ist äquivalent zu \nxLcs{oenodeIfc\{N\}}. Die Eingangs- |
| 7319 |
% und Ausgangsknoten sollten über die explizit bereitgestellten Makros |
| 7320 |
% angesprochen werden, \nxLcs{oenodeIfc} sollte nur für die weiteren |
| 7321 |
% Grenzflächenknoten, sofern vorhanden, verwendet werden. |
| 7322 |
% \fi |
| 7323 |
% \ifENGLISH |
| 7324 |
% «Input» and «output» can define only relative orientations. The input node |
| 7325 |
% is by definition the node to which a beam coming from the reference node |
| 7326 |
% \Lcs{oenodeRefA} is connected to. Correspondingly is the definition of the |
| 7327 |
% output node. This definition breaks down only for fiber couplers (see |
| 7328 |
% \prettyref{sec:coupler-nodes}) and beamsplitter (\compref{beamsplitter}). |
| 7329 |
% |
| 7330 |
% \nxLcs{oenodeIn} is equivalent to \nxLcs{oenodeIfc\{1\}} and |
| 7331 |
% \nxLcs{oenodeOut} is equivalent to \nxLcs{oenodeIfc\{N\}}. You should use |
| 7332 |
% the \nxLcs{oenodeIfc} macro only to access the nodes which are not the input |
| 7333 |
% and output nodes as for those explicit macros are provided. |
| 7334 |
% \fi |
| 7335 |
% \end{ltxsyntax} |
| 7336 |
% \iffalse |
| 7337 |
%<*ignore> |
| 7338 |
% \fi |
| 7339 |
\begin{LTXexample} |
| 7340 |
\begin{pspicture}(2.8,3) |
| 7341 |
\pentaprism[pentaprismsize=1.3](0,1.5)(1.5,1.5)(1.5,0) |
| 7342 |
\drawbeam[arrows=->, arrowinset=0, arrowscale=1.5](0,1.5){}(1.5,0) |
| 7343 |
\psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 7344 |
\psdot(\oenodeIfc{2}{})\uput[0](\oenodeIfc{2}{}){2} |
| 7345 |
\psdot(\oenodeIfc{3}{})\uput[90](\oenodeIfc{3}{}){3} |
| 7346 |
\psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 7347 |
\end{pspicture} |
| 7348 |
\end{LTXexample} |
| 7349 |
% \iffalse |
| 7350 |
%</ignore> |
| 7351 |
% \fi |
| 7352 |
% |
| 7353 |
% \ifGERMAN |
| 7354 |
% In \prettyref{sec:overview-ifcnode} finden Sie eine vollständige Liste aller |
| 7355 |
% Komponenten mit ihren Grenzflächenknoten. |
| 7356 |
% \fi |
| 7357 |
% \ifENGLISH |
| 7358 |
% See \prettyref{sec:overview-ifcnode} for a complete list of all |
| 7359 |
% components with their interface nodes. |
| 7360 |
% \fi |
| 7361 |
% |
| 7362 |
% \ifGERMAN\section{Referenzknoten für die Rotation}\fi |
| 7363 |
% \ifENGLISH\section{Rotation reference node}\fi |
| 7364 |
% \label{sec:rotrefnode} |
| 7365 |
% |
| 7366 |
% \begin{ltxsyntax} |
| 7367 |
% \cmditem{oenodeRotref}{comp} |
| 7368 |
% |
| 7369 |
% \ifGERMAN |
| 7370 |
% Der Referenzknoten um den eine Komponente mit \Lkeyword{angle} gedreht |
| 7371 |
% wird. Die Position des Knotens wird mit dem \Lkeyword{rotateref} Parameter |
| 7372 |
% definiert und kann dieselben Werte annehmen wie \Lkeyword{extnode}. Eine |
| 7373 |
% vollständige Liste der möglichen Positionen finden Sie in |
| 7374 |
% \prettyref{sec:overview-extnode}. |
| 7375 |
% \fi |
| 7376 |
% \ifENGLISH |
| 7377 |
% The node around which a component is rotated by \Lkeyword{angle}. The |
| 7378 |
% position is defined with the \Lkeyword{rotateref} parameter and can take the |
| 7379 |
% same values as \Lkeyword{extnode}. See \prettyref{sec:overview-extnode} for |
| 7380 |
% possible rotation reference nodes of all components. |
| 7381 |
% \fi |
| 7382 |
% \iffalse |
| 7383 |
%<*ignore> |
| 7384 |
% \fi |
| 7385 |
\begin{LTXexample}[pos=t, linerange={1-2, 6-7, 11-12}] |
| 7386 |
\begin{pspicture}(0,0.1)(12,1.8) |
| 7387 |
\optbox[angle=20](0.5,1)(4.5,1) |
| 7388 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 7389 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 7390 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 7391 |
\psdot(\oenodeRotref{})\uput[-90](\oenodeRotref{}){Rotref} |
| 7392 |
\optbox[angle=20, rotateref=bl](7.5,1)(11.5,1) |
| 7393 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 7394 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 7395 |
\psline[style=Refline](\oenodeRefA{})(\oenodeRefB{}) |
| 7396 |
\psdot(\oenodeRotref{})\uput[-90](\oenodeRotref{}){Rotref} |
| 7397 |
\end{pspicture} |
| 7398 |
\end{LTXexample} |
| 7399 |
% \iffalse |
| 7400 |
%</ignore> |
| 7401 |
% \fi |
| 7402 |
% \end{ltxsyntax} |
| 7403 |
% |
| 7404 |
% \ifGERMAN\section{Strahlknoten}\fi |
| 7405 |
% \ifENGLISH\section{Beam nodes}\fi |
| 7406 |
% \label{sec:beamnode} |
| 7407 |
% |
| 7408 |
% \ifGERMAN |
| 7409 |
% Die Endknoten eines \Lcs{drawbeam} oder \Lcs{drawwidebeam} Kommandos |
| 7410 |
% können wieder verwendet werden, wenn \Lkeyword{savebeampoints} gesetzt ist. |
| 7411 |
% \fi |
| 7412 |
% \ifENGLISH |
| 7413 |
% The end points of a recent \Lcs{drawbeam} or \Lcs{drawwidebeam} command can |
| 7414 |
% be reused if \Lkeyword{savebeampoints} is set. |
| 7415 |
% \fi |
| 7416 |
% \begin{ltxsyntax} |
| 7417 |
% \cmditem{oenodeBeam}{num} |
| 7418 |
% |
| 7419 |
% \ifGERMAN |
| 7420 |
% Damit wird der Endknoten eines vorangegangenen \Lcs{drawbeam} Kommandos |
| 7421 |
% angesprochen. Wird \prm{num} leer gelassen so wird \opt{1} genommen, was in |
| 7422 |
% der Regel dem letzten Strahlengang entspricht. Auf welchen Strahl genau |
| 7423 |
% Bezug genommen wird, hängt i.a. von den gewählten Einstellungen von |
| 7424 |
% \Lkeyword{savebeampoints} und entsprechender Wahl von \prm{num} ab. |
| 7425 |
% \fi |
| 7426 |
% \ifENGLISH |
| 7427 |
% Access the end point of a preceeding \Lcs{drawbeam} command. If \prm{num} is |
| 7428 |
% left empty it defaults to \opt{1} which usually refers to the last beam |
| 7429 |
% ray. However, generally it depends on the settings of |
| 7430 |
% \Lkeyword{savebeampoints} and the choice of \prm{num} which beam you refer |
| 7431 |
% to. |
| 7432 |
% \fi |
| 7433 |
% \iffalse |
| 7434 |
%<*ignore> |
| 7435 |
% \fi |
| 7436 |
\begin{LTXexample} |
| 7437 |
\begin{pspicture}(0,0)(3,2) |
| 7438 |
\pnodes(0,1){A}(1.6,1){B} |
| 7439 |
\optbox[position=end](A)(B) |
| 7440 |
\drawbeam[beaminsidelast=false](A){1} |
| 7441 |
\psdot(\oenodeBeam{}) |
| 7442 |
\end{pspicture} |
| 7443 |
\end{LTXexample} |
| 7444 |
% \iffalse |
| 7445 |
%</ignore> |
| 7446 |
% \fi |
| 7447 |
% |
| 7448 |
% \cmditem{oenodeBeamUp}{num} |
| 7449 |
% \cmditem{oenodeBeamLow}{num} |
| 7450 |
% |
| 7451 |
% \ifGERMAN |
| 7452 |
% Damit wird der obere («upper») oder untere («lower») Endknoten eines |
| 7453 |
% vorangegangenen \Lcs{drawwidebeam} Kommandos angesprochen. Wird \prm{num} |
| 7454 |
% leer gelassen so wird \opt{1} genommen, womit man sich in der Regel auf den |
| 7455 |
% letzten Strahlengang bezieht. Auf welchen Strahl genau Bezug genommen wird, |
| 7456 |
% hängt i.a. von den gewählten Einstellungen von \Lkeyword{savebeampoints} und |
| 7457 |
% entsprechender Wahl von \prm{num} ab. |
| 7458 |
% \fi |
| 7459 |
% \ifENGLISH |
| 7460 |
% Access the upper or lower end point of a preceeding \Lcs{drawwidebeam} |
| 7461 |
% command. If \prm{num} is left empty it defaults to \opt{1}, which usually |
| 7462 |
% refers to the last beam ray. However, generally it depends on the settings |
| 7463 |
% of \Lkeyword{savebeampoints} and the choice of \prm{num} which beam you |
| 7464 |
% refer to. |
| 7465 |
% \fi |
| 7466 |
% |
| 7467 |
% \iffalse |
| 7468 |
%<*ignore> |
| 7469 |
% \fi |
| 7470 |
\begin{LTXexample}[linerange={1-6,10-10}] |
| 7471 |
\begin{pspicture}(0,0)(3,2) |
| 7472 |
\pnodes(0,1){A}(3,1){B} |
| 7473 |
\lens[abspos=1, lensradius=-2](A)(B) |
| 7474 |
\addtopsstyle{Beam}{% |
| 7475 |
fillstyle=solid, fillcolor=green, opacity=0.3} |
| 7476 |
\drawwidebeam[beamwidth=0.5](A){}(B) |
| 7477 |
\psdot(\oenodeBeamUp{})\psdot(\oenodeBeamLow{}) |
| 7478 |
\uput[90](\oenodeBeamUp{}){\rput[rb](0,0){BeamUp}} |
| 7479 |
\uput[-90](\oenodeBeamLow{}){\rput[rt](0,0){BeamLow}} |
| 7480 |
\end{pspicture} |
| 7481 |
\end{LTXexample} |
| 7482 |
% \iffalse |
| 7483 |
%</ignore> |
| 7484 |
% \fi |
| 7485 |
% |
| 7486 |
% \ifGERMAN |
| 7487 |
% Beachten Sie, dass «oben» («upper») und «unten» («lower») bezüglich der |
| 7488 |
% Ausbreitungsrichtung des Strahls definiert ist. Ein Randstrahl der als «upper» |
| 7489 |
% startet can zu «lower» werden, wenn er den anderen Randstrahl kreuzt. Das wird |
| 7490 |
% in dem folgenden Beispiel erläutert: |
| 7491 |
% \fi |
| 7492 |
% \ifENGLISH |
| 7493 |
% Note, that «upper» and «lower» is defined with respect to the propagation |
| 7494 |
% direction of the beam. A marginal beam which started as «upper» can change to «lower» |
| 7495 |
% if it crosses the other marginal beam. This is shown in the following example, |
| 7496 |
% where the marginal rays exchange their roles: |
| 7497 |
% \fi |
| 7498 |
% |
| 7499 |
% \iffalse |
| 7500 |
%<*ignore> |
| 7501 |
% \fi |
| 7502 |
\begin{LTXexample}[linerange={1-6,10-10,14-14}] |
| 7503 |
\begin{pspicture}(0,0)(3,2) |
| 7504 |
\pnodes(0,1){A}(3,1){B} |
| 7505 |
\lens[abspos=1, n=2](A)(B) |
| 7506 |
\addtopsstyle{Beam}{% |
| 7507 |
fillstyle=solid, fillcolor=green, opacity=0.3} |
| 7508 |
\drawwidebeam[beamwidth=0.5](A){} |
| 7509 |
\psdot(\oenodeBeamUp{})\psdot(\oenodeBeamLow{}) |
| 7510 |
\uput[90](\oenodeBeamUp{}){\rput[rb](0,0){BeamUp}} |
| 7511 |
\uput[-90](\oenodeBeamLow{}){\rput[rt](0,0){BeamLow}} |
| 7512 |
\drawwidebeam[loadbeam, beaminsidefirst]{}(B) |
| 7513 |
\psdot(\oenodeBeamUp{})\psdot(\oenodeBeamLow{}) |
| 7514 |
\uput[90](\oenodeBeamUp{}){\rput[rb](0,0){BeamUp}} |
| 7515 |
\uput[-90](\oenodeBeamLow{}){\rput[rt](0,0){BeamLow}} |
| 7516 |
\end{pspicture} |
| 7517 |
\end{LTXexample} |
| 7518 |
% \iffalse |
| 7519 |
%</ignore> |
| 7520 |
% \fi |
| 7521 |
% |
| 7522 |
% \ifGERMAN Bei einer Reflektion können ebenfalls die Rollen vertauscht werden.\fi |
| 7523 |
% \ifENGLISH After a reflection the roles can also be exchanged.\fi |
| 7524 |
% |
| 7525 |
% \iffalse |
| 7526 |
%<*ignore> |
| 7527 |
% \fi |
| 7528 |
\begin{LTXexample}[linerange={1-6,8-8,15-15}] |
| 7529 |
\begin{pspicture}(0,-1)(4,2) |
| 7530 |
\pnodes(0,1.5){A}(2,1.5){B}(2.8,0){C} |
| 7531 |
\mirror[mirrorwidth=1.2, mirrortype=extended](A)(B)(C) |
| 7532 |
\addtopsstyle{Beam}{% |
| 7533 |
fillstyle=solid, fillcolor=green, opacity=0.3} |
| 7534 |
\drawwidebeam[beamwidth=0.5](A){} |
| 7535 |
\pnodes(\oenodeBeamUp{}){Up1}(\oenodeBeamLow{}){Low1} |
| 7536 |
\drawwidebeam[loadbeam]{}(C) |
| 7537 |
\psdot(\oenodeBeamUp{})\psdot(\oenodeBeamLow{}) |
| 7538 |
\uput[90](\oenodeBeamUp{}){\rput[lb](0,0){BeamUp}} |
| 7539 |
\uput[-90](\oenodeBeamLow{}){BeamLow} |
| 7540 |
\psdot(Up1)\psdot(Low1) |
| 7541 |
\uput[90](Up1){\rput[lb](0,0){BeamUp}} |
| 7542 |
\uput[0](Low1){\rput[l](0,0){BeamLow}} |
| 7543 |
\end{pspicture} |
| 7544 |
\end{LTXexample} |
| 7545 |
% \iffalse |
| 7546 |
%</ignore> |
| 7547 |
% \fi |
| 7548 |
% |
| 7549 |
% \ifGERMAN |
| 7550 |
% Beachten Sie, dass sich die Orientierung von «oben» und «unten» in |
| 7551 |
% Version 3.3 geändert hat, siehe \prettyref{sec:bwd-comp-3.3}. |
| 7552 |
% \fi |
| 7553 |
% \ifENGLISH |
| 7554 |
% Note, that the orientation of «upper» and «lower» changed with version |
| 7555 |
% 3.3, for more details see \prettyref{sec:bwd-comp-3.3}. |
| 7556 |
% \fi |
| 7557 |
% |
| 7558 |
% \cmditem{oeBeamCenter}{num} |
| 7559 |
% |
| 7560 |
% \ifGERMAN Damit erhält man die Mitte zwischen oberem und unterem |
| 7561 |
% Endknoten, die Koordinaten sind nur aus Postscript-Ebene verfügbar, |
| 7562 |
% im Gegensatz zu \Lcs*{oenodeBeam*}, daher auch die an |
| 7563 |
% \Lcs*{oeBeamVec*} angelehnte Nomenklatur. Ein Anwendungsbeispiel ist |
| 7564 |
% \prettyref{ex:beamcenter}. |
| 7565 |
% \fi |
| 7566 |
% \ifENGLISH Get the mean of upper and lower beam node. The |
| 7567 |
% coordinates are available only at Postscript level, in contrast to |
| 7568 |
% the \Lcs*{oenodeBeam*} macros. For an example see |
| 7569 |
% \prettyref{ex:beamcenter}. |
| 7570 |
% \fi |
| 7571 |
% \end{ltxsyntax} |
| 7572 |
% |
| 7573 |
% \ifGERMAN |
| 7574 |
% Die Strahlknoten können nur innerhalb der \Lenv*{pspicture}-Umgebung verwendet |
| 7575 |
% werden, in der sie definiert wurden. Um auf bestimmte Strahlknoten von |
| 7576 |
% außerhalb zugreifen zu können müssen diese vorher explizit umdefiniert werden: |
| 7577 |
% \fi |
| 7578 |
% \ifENGLISH |
| 7579 |
% The beam nodes can be accessed only within the \Lenv*{pspicture} environment |
| 7580 |
% they were defined in. If you want to use one of these nodes from outside, you |
| 7581 |
% must explicitely redefine them beforehand: |
| 7582 |
% \fi |
| 7583 |
% |
| 7584 |
% \iffalse |
| 7585 |
%<*ignore> |
| 7586 |
% \fi |
| 7587 |
\begin{lstlisting} |
| 7588 |
\pnode(\oenodeBeam{}){MyBeamNode} |
| 7589 |
\end{lstlisting} |
| 7590 |
% \iffalse |
| 7591 |
%</ignore> |
| 7592 |
% \fi |
| 7593 |
% |
| 7594 |
% \ifGERMAN |
| 7595 |
% Desweiteren werden die Endknoten durch \Lkeyword{stopinside} |
| 7596 |
% beeinflusst. Siehe \prettyref{sec:custombeam} für weitere Details. |
| 7597 |
% \fi |
| 7598 |
% \ifENGLISH |
| 7599 |
% The end points are also affected by \Lkeyword{stopinside}. See |
| 7600 |
% \prettyref{sec:custombeam} for further details. |
| 7601 |
% \fi |
| 7602 |
% \iffalse |
| 7603 |
%<*ignore> |
| 7604 |
% \fi |
| 7605 |
\begin{LTXexample} |
| 7606 |
\begin{pspicture}(0,0)(3,2) |
| 7607 |
\pnodes(0,1){A}(1.6,1){B} |
| 7608 |
\optbox[position=end](A)(B) |
| 7609 |
\psset{beaminsidelast=false} |
| 7610 |
\drawbeam[linecolor=red, beampos=0.3](A){1} |
| 7611 |
\psdot(\oenodeBeam{}) |
| 7612 |
\drawbeam[stopinside](A){1} |
| 7613 |
\psdot(\oenodeBeam{}) |
| 7614 |
\end{pspicture} |
| 7615 |
\end{LTXexample} |
| 7616 |
% \iffalse |
| 7617 |
%</ignore> |
| 7618 |
% \fi |
| 7619 |
% |
| 7620 |
% \ifGERMAN\section{Strahlvektor}\fi |
| 7621 |
% \ifENGLISH\section{Beam vector}\fi |
| 7622 |
% |
| 7623 |
% \ifENGLISH In addition to the beam nodes (see |
| 7624 |
% \prettyref{sec:beamnode}) also the normalized vectors of the last |
| 7625 |
% saved beams (see \Lkeyword{savebeam}) can be accessed at Postscript |
| 7626 |
% level. |
| 7627 |
% |
| 7628 |
% These are again separated in single, upper and lower beams. \prm{num} |
| 7629 |
% has the same meaning as for \Lcs{oenodeBeam}. |
| 7630 |
% \fi |
| 7631 |
% |
| 7632 |
% \ifGERMAN Zusätzlich zu den Strahlknoten (siehe |
| 7633 |
% \prettyref{sec:beamnode}) kann auf Postscript-Ebene auf die normierten |
| 7634 |
% Strahlvektoren der letzten gespeicherten Strahlen (siehe |
| 7635 |
% \Lkeyword{savebeam}) zugegriffen werden. |
| 7636 |
% |
| 7637 |
% Auch hier wird zwischen Einzelstrahlen, und oberem bzw. unterem Strahl |
| 7638 |
% unterschieden. \prm{num} hat dieselbe Bedeutung wie bei \Lcs{oenodeBeam}. |
| 7639 |
% \fi |
| 7640 |
% \begin{ltxsyntax} |
| 7641 |
% \cmditem{oeBeamVec}{num} |
| 7642 |
% \cmditem{oeBeamVecUp}{num} |
| 7643 |
% \cmditem{oeBeamVecLow}{num} |
| 7644 |
% \end{ltxsyntax} |
| 7645 |
% |
| 7646 |
% \ifGERMAN Bei den gespeicherten Werten handelt es sich um den |
| 7647 |
% normierten Richtungsvektor des letzten Strahlsegments, dieser ist nur |
| 7648 |
% auf Postscript-Ebene verfügbar. Dieser Richtungsvektor ist im |
| 7649 |
% folgenden Beispiel in rot zu sehen. Im Gegensatz dazu wird mit |
| 7650 |
% \Lkeyword{savebeam} der Richtungsvektor gespeichert, der nach der |
| 7651 |
% letzten Grenzfläche gelten würde, also für einen nachfolgenden Strahl |
| 7652 |
% verwendet würde. Dieser ist im Beispiel in blau eingezeichnet. |
| 7653 |
% \fi |
| 7654 |
% \ifENGLISH The saved values are those of the normalized direction |
| 7655 |
% vector of the last beam segment and are drawn in red in the next example. In contrast |
| 7656 |
% to this, the vector saved with \Lkeyword{savebeam} is that behind the |
| 7657 |
% last interface and would be used for a following beam. This is shown |
| 7658 |
% in blue in the following example. |
| 7659 |
% \fi |
| 7660 |
% \iffalse |
| 7661 |
%<*ignore> |
| 7662 |
% \fi |
| 7663 |
\begin{LTXexample}[morekeywords={[21]beaminsidelast}] |
| 7664 |
\begin{pspicture}(4,2) |
| 7665 |
\optbox[optboxsize=2 1, angle=20, n=2](0,1)(4,1) |
| 7666 |
\drawbeam[beaminsidelast, beamalign=abs](0,1){1} |
| 7667 |
\pnode(\oenodeBeam{}){Out} |
| 7668 |
\nodexn{(Out)+(!\oeBeamVec{})}{C} |
| 7669 |
\drawbeam[linecolor=blue, arrows=->, loadbeam]{1}(C) |
| 7670 |
\drawbeam[linecolor=red, arrows=->](Out)(C) |
| 7671 |
\end{pspicture} |
| 7672 |
\end{LTXexample} |
| 7673 |
% \iffalse |
| 7674 |
%</ignore> |
| 7675 |
% \fi |
| 7676 |
% |
| 7677 |
% \ifGERMAN Das Verhalten ist unabhängig davon, ob der letzte Strahl nur |
| 7678 |
% berechnet, oder auch gezeichnet wurde. Das nächste Beispiel verwendet |
| 7679 |
% \Lkeyword{stopinside} anstelle vom Parameter \Lkeyword{beaminsidelast} |
| 7680 |
% im vorangegangenen Beispiel; die Strahlvektoren bleiben davon |
| 7681 |
% unbeeinflusst. |
| 7682 |
% \fi |
| 7683 |
% \ifENGLISH This behaviour is independent of whether the last beam was |
| 7684 |
% only calculated or also drawn. The next example uses |
| 7685 |
% \Lkeyword{stopinside} instead of \Lkeyword{beaminsidelast} compared to |
| 7686 |
% the previous example; the beam vectors are not affected by this. |
| 7687 |
% \fi |
| 7688 |
% \iffalse |
| 7689 |
%<*ignore> |
| 7690 |
% \fi |
| 7691 |
\begin{LTXexample}[morekeywords={[21]stopinside}] |
| 7692 |
\begin{pspicture}(4,2) |
| 7693 |
\optbox[optboxsize=2 1, angle=20, n=2](0,1)(4,1) |
| 7694 |
\drawbeam[stopinside, beamalign=abs](0,1){1} |
| 7695 |
\pnode(\oenodeBeam{}){Out} |
| 7696 |
\nodexn{(Out)+(!\oeBeamVec{})}{C} |
| 7697 |
\drawbeam[linecolor=blue, arrows=->, loadbeam]{1}(C) |
| 7698 |
\drawbeam[linecolor=red, arrows=->](Out)(C) |
| 7699 |
\end{pspicture} |
| 7700 |
\end{LTXexample} |
| 7701 |
% \iffalse |
| 7702 |
%</ignore> |
| 7703 |
% \fi |
| 7704 |
% |
| 7705 |
% \ifGERMAN Das kann dazu genutzt werden, um z.B. die Polarisation eines |
| 7706 |
% Strahls zu kennzeichnen. Im folgenden Beispiel werden die neuen Knoten |
| 7707 |
% \prm{U} und \prm{L}definiert, indem mit \Lcs*{nodexn} die Endpunkte |
| 7708 |
% des oberen bzw. unteren Strahls entlang ihrer Trajektorie zurück |
| 7709 |
% verschoben werden. |
| 7710 |
% \fi |
| 7711 |
% \ifENGLISH A possible application is marking of the polarization of a |
| 7712 |
% beam. In the following example we define the nodes \prm{U} and \prm{L} |
| 7713 |
% which are shifted with \Lcs*{nodexn} from the end point of the upper |
| 7714 |
% and lower beam along the respective beam trajectory. |
| 7715 |
% \fi |
| 7716 |
% \iffalse |
| 7717 |
%<*ignore> |
| 7718 |
% \fi |
| 7719 |
\begin{LTXexample}[linerange={1-9,11-11}] |
| 7720 |
\begin{pspicture}(3,3) |
| 7721 |
\pnodes(0,1.5){A}(3,1.5){B} |
| 7722 |
\lens[abspos=1, lens=5 5 3, n=2.0](A)(B) |
| 7723 |
\optplane[angle=90](B) |
| 7724 |
\drawwidebeam[beamwidth=2](A){1-2} |
| 7725 |
\nodexn{(\oenodeBeamUp{})-2(!\oeBeamVecUp{})}{U} |
| 7726 |
\nodexn{(\oenodeBeamLow{})-2(!\oeBeamVecLow{})}{L} |
| 7727 |
\polarization(U)(\oenodeBeamUp{}) |
| 7728 |
\polarization(L)(\oenodeBeamLow{}) |
| 7729 |
\psdot(U)\uput[45](U){U}\psdot(L)\uput[-45](L){L} |
| 7730 |
\end{pspicture} |
| 7731 |
\end{LTXexample} |
| 7732 |
% \iffalse |
| 7733 |
%</ignore> |
| 7734 |
% \fi |
| 7735 |
% |
| 7736 |
% \begin{ltxsyntax} |
| 7737 |
% \cmditem{oeBeamVecMedian}{num} |
| 7738 |
% \ifGERMAN Der Mittelwert aus oberem und unterem Strahlvektor.\fi |
| 7739 |
% \ifENGLISH The mean of upper and lower beam vector.\fi |
| 7740 |
% \end{ltxsyntax} |
| 7741 |
% |
| 7742 |
% \iffalse |
| 7743 |
%<*ignore> |
| 7744 |
% \fi |
| 7745 |
\begin{LTXexample}[caption={caption}, label={ex:beamcenter}] |
| 7746 |
\begin{pspicture}(3.5,2.6) |
| 7747 |
\pnodes(0,2){A}(1,2){B}(3,1){C} |
| 7748 |
\optprism(A)(B)(C) |
| 7749 |
\newpsstyle{Beam}{linestyle=none, fillstyle=solid, beamwidth=0.2, beamnodealign=vector} |
| 7750 |
\drawwidebeam[fillcolor=orange](A){} |
| 7751 |
\psset[optexp]{beampathskip=1} |
| 7752 |
\drawwidebeam[fillcolor=green, n=1.2, savebeam=2](A){}(C) |
| 7753 |
\drawwidebeam[fillcolor=red, n=1.4, savebeam=3](A){}(C) |
| 7754 |
\drawwidebeam[fillcolor=red!50!black, n=1.57, savebeam=4](A){}(C) |
| 7755 |
\multido{\i=2+1}{3}{% |
| 7756 |
\backlayer{% |
| 7757 |
\pnode(!\oeBeamCenter{\i}){Det\i} |
| 7758 |
\nodexn{(Det\i)-(!\oeBeamVecMedian{\i})}{Det\i'}} |
| 7759 |
\optdetector[detsize=0.4 0.4](Det\i')(Det\i)} |
| 7760 |
\end{pspicture} |
| 7761 |
\end{LTXexample} |
| 7762 |
% \iffalse |
| 7763 |
%</ignore> |
| 7764 |
% \fi |
| 7765 |
% |
| 7766 |
% \ifGERMAN Weitere Anwendungsbeispiele sind \prettyref{ex:glan-thompson} und \prettyref{ex:wgm-pdc}.\fi |
| 7767 |
% \ifENGLISH Further example are \prettyref{ex:glan-thompson} and \prettyref{ex:wgm-pdc}.\fi |
| 7768 |
% |
| 7769 |
% |
| 7770 |
% \ifGERMAN\section{Knotenübersicht}\fi |
| 7771 |
% \ifENGLISH\section{Node overview}\fi |
| 7772 |
% |
| 7773 |
% \ifENGLISH This is an overview of all available component nodes.\fi |
| 7774 |
% \ifGERMAN Dies ist eine Übersicht über alle verfügbaren Komponentenknoten.\fi |
| 7775 |
% \iffalse |
| 7776 |
%<*ignore> |
| 7777 |
% \fi |
| 7778 |
\begin{LTXexample}[pos=t, linerange={2-4,17-17}] |
| 7779 |
\psset{unit=2} |
| 7780 |
\begin{pspicture}(0.3,0.1)(4.8,1.6) |
| 7781 |
\pnodes(0.5,0.5){A}(4.5,0.5){B} |
| 7782 |
\optbox[compshift=0.5, angle=10, rotateref=tr, extnode={-0.5,1}](A)(B) |
| 7783 |
\psline[style=Refline](\oenodeTrefA{})(\oenodeTrefB{}) |
| 7784 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}) |
| 7785 |
\psdot(\oenodeRefA{})\uput[-90](\oenodeRefA{}){RefA} |
| 7786 |
\psdot(\oenodeRefB{})\uput[-90](\oenodeRefB{}){RefB} |
| 7787 |
\psdot(\oenodeTrefA{})\uput[90](\oenodeTrefA{}){TrefA} |
| 7788 |
\psdot(\oenodeTrefB{})\uput[90](\oenodeTrefB{}){TrefB} |
| 7789 |
\psdot(\oenodeOut{})\uput[80](\oenodeOut{}){\rput[l](0,0.1){Out}} |
| 7790 |
\psdot(\oenodeIn{})\uput[100](\oenodeIn{}){\rput[r](0,0){In}} |
| 7791 |
\psdot(\oenodeCenter{})\uput[90](\oenodeCenter{}){Center} |
| 7792 |
\psdot(\oenodeRotref{})\uput[90](\oenodeRotref{}){Rotref} |
| 7793 |
\psdot(\oenodeExt{})\uput[90](\oenodeExt{}){Ext} |
| 7794 |
\psdot(\oenodeLabel{})\uput[90](\oenodeLabel{}){Label} |
| 7795 |
\end{pspicture} |
| 7796 |
\end{LTXexample} |
| 7797 |
% \iffalse |
| 7798 |
%</ignore> |
| 7799 |
% \fi |
| 7800 |
% |
| 7801 |
% \ifGERMAN\chapter{Verbinden von Komponenten}\fi |
| 7802 |
% \ifENGLISH\chapter{Connecting components}\fi |
| 7803 |
% \label{chap:connecting} |
| 7804 |
% |
| 7805 |
% \ifGERMAN |
| 7806 |
% Das \nxLPack{pst-optexp}-Paket stellt unterschiedlichen Methoden |
| 7807 |
% bereit, Komponenten vollautomatisch oder manuell, mit Lichtstrahlen, |
| 7808 |
% Fasern oder Drähten zu verbinden. |
| 7809 |
% \begin{compactitem} |
| 7810 |
% \item In \prettyref{sec:accessobj} wird beschrieben wie Komponenten |
| 7811 |
% und Knoten für Verbindungen angesprochen werden. |
| 7812 |
% \item Strahlverbindungen im Allgemeinen und das Verhalten von |
| 7813 |
% Einzelstrahlen wird in \prettyref{sec:drawbeam} beschrieben. |
| 7814 |
% \item \prettyref{sec:drawwidebeam} erweitert diese Beschreibung von |
| 7815 |
% Strahlverbindungen auf ausgedehnte Strahlen und deren Eigenheiten. |
| 7816 |
% \item In \prettyref{sec:error-handling} wird gezeigt, wie fehlerhafte |
| 7817 |
% Strahlverbindungen (verfehlen von Grenzflächen) gehandhabt wird). |
| 7818 |
% \item \prettyref{sec:custombeam} erläutert, wie bestimmte, stückweise |
| 7819 |
% definierte Strahlengänge, wie z.B. bei eine Teleskop, einfach |
| 7820 |
% realisiert werden können. |
| 7821 |
% \item Manuelle Faserverbindungen werden in \prettyref{sec:drawfiber} |
| 7822 |
% behandelt, manuelle elektrischen Verbindungen, die sehr ähnlich |
| 7823 |
% funktionieren, in \prettyref{sec:drawwire}. |
| 7824 |
% \item Automatische Verbindungen werden in |
| 7825 |
% \prettyref{sec:drawconn-auto} erklärt. |
| 7826 |
% \item \prettyref{sec:layers} erklärt das Konzept der «front» und |
| 7827 |
% «back»-Ebene. |
| 7828 |
% \end{compactitem} |
| 7829 |
% \fi |
| 7830 |
% \ifENGLISH |
| 7831 |
% The \LPack{pst-optexp} package provides several methods for automatic |
| 7832 |
% and manual connections of components with beams, fibers, or wires. |
| 7833 |
% \begin{compactitem} |
| 7834 |
% \item \prettyref{sec:accessobj} describes how to access objects and |
| 7835 |
% nodes for use with the connection macros. |
| 7836 |
% \item Beam drawing in general and the behavior of single beams is |
| 7837 |
% explained in \prettyref{sec:drawbeam}. |
| 7838 |
% \item \prettyref{sec:drawwidebeam} extends this description of beam |
| 7839 |
% drawing to wide beams and their special properties. |
| 7840 |
% \item \prettyref{sec:error-handling} shows how errors in beam |
| 7841 |
% connections (missed interfaces etc.) are handled. |
| 7842 |
% \item \prettyref{sec:custombeam} explains how customized, piecewise |
| 7843 |
% defined beam paths, like e.g. in a telescope, can be easily |
| 7844 |
% constructed. |
| 7845 |
% \item Manual fiber connections are described in |
| 7846 |
% \prettyref{sec:drawfiber}, manual wire connections, which show the |
| 7847 |
% same behavior, are treated in \prettyref{sec:drawwire}. |
| 7848 |
% \item Automatic connections are explained in |
| 7849 |
% \prettyref{sec:drawconn-auto}. |
| 7850 |
% \item \prettyref{sec:layers} introduces the concept of front and back |
| 7851 |
% layer for the drawings. |
| 7852 |
% \end{compactitem} |
| 7853 |
% \fi |
| 7854 |
% \ifGERMAN\section{Zugriff auf Komponenten}\fi |
| 7855 |
% \ifENGLISH\section{Accessing components}\fi\label{sec:accessobj} |
| 7856 |
% |
| 7857 |
% \ifENGLISH |
| 7858 |
% All macros for connections can take either an ID, a \Lkeyword{compname} |
| 7859 |
% identifier (see \prettyref{sec:namingobj}) or PSTricks nodes as arguments, |
| 7860 |
% which are denoted with \prm{obj$_1$}, \prm{obj$_2$}, \ldots. To distinguish |
| 7861 |
% between nodes and components, nodes must be either enclosed in parenthesis |
| 7862 |
% within the brackets, or enclosed only in parenthesis: |
| 7863 |
% \Lcs{drawbeam}\opt{\{(node)\}\{comp\}}, or \Lcs{drawbeam}\opt{(node)\{comp\}}. |
| 7864 |
% \fi |
| 7865 |
% \ifGERMAN |
| 7866 |
% Alle Makros für Verbindungen akzeptieren entweder eine ID, ein |
| 7867 |
% \Lkeyword{compname} Bezeichner (siehe \prettyref{sec:namingobj}) oder einen |
| 7868 |
% PSTricks-Knoten als Argument, die als \prm{obj$_1$}, \prm{obj$_2$}, \ldots{} |
| 7869 |
% bezeichnet werden. Um zwischen Knoten und Komponenten unterscheiden zu können, |
| 7870 |
% müssen Knoten entweder in runde Klammern innerhalb der geschweiften Klammern |
| 7871 |
% eingeschlossen werden oder dürfen nur runde Klammern haben: |
| 7872 |
% \Lcs{drawbeam}\opt{\{(node)\}\{comp\}}, oder |
| 7873 |
% \Lcs{drawbeam}\opt{(node)\{comp\}}. |
| 7874 |
% \fi |
| 7875 |
% |
| 7876 |
% \begin{enumerate} |
| 7877 |
% \item |
| 7878 |
% \ifGERMAN Auf alle Komponenten kann immer unter Verwendung der ID |
| 7879 |
% zugegriffen werden. |
| 7880 |
% \fi |
| 7881 |
% \ifENGLISH All components can always be accessed via their ID.\fi |
| 7882 |
% \iffalse |
| 7883 |
%<*ignore> |
| 7884 |
% \fi |
| 7885 |
\begin{LTXexample} |
| 7886 |
\begin{pspicture}(3,1.5) |
| 7887 |
\pnodes(0,1){A}(1.5,1){B} |
| 7888 |
\optbox[position=end, labeloffset=0](A)(B){1} |
| 7889 |
\drawbeam(A){1} |
| 7890 |
\end{pspicture} |
| 7891 |
\end{LTXexample} |
| 7892 |
% \iffalse |
| 7893 |
%</ignore> |
| 7894 |
% \fi |
| 7895 |
% |
| 7896 |
% \item |
| 7897 |
% \ifGERMAN Wenn eine Komponente mit \Lkeyword{compname} einen zusätzlichen |
| 7898 |
% Namen erhalten hat, so kann dieser anstelle der ID verwendet werden. |
| 7899 |
% \fi |
| 7900 |
% \ifENGLISH A component which has been assigned a name with |
| 7901 |
% \Lkeyword{compname} can also be accessed via this instead of its ID. |
| 7902 |
% \fi |
| 7903 |
% \iffalse |
| 7904 |
%<*ignore> |
| 7905 |
% \fi |
| 7906 |
\begin{LTXexample}[morekeywords={[21]{compname}}] |
| 7907 |
\begin{pspicture}(3,2) |
| 7908 |
\psset{position=end, labeloffset=0} |
| 7909 |
\optbox[compname=obj](0,1)(1.5,1){obj} |
| 7910 |
\drawbeam(0,1){obj} |
| 7911 |
\end{pspicture} |
| 7912 |
\end{LTXexample} |
| 7913 |
% \iffalse |
| 7914 |
%</ignore> |
| 7915 |
% \fi |
| 7916 |
% |
| 7917 |
% \item |
| 7918 |
% \ifGERMAN Wird das Argument leer gelassen, dann greift man auf die zuletzt |
| 7919 |
% definierte Komponente zu. |
| 7920 |
% \fi |
| 7921 |
% \ifENGLISH If the argument is left empty, use the last component defined. |
| 7922 |
% \fi |
| 7923 |
% \iffalse |
| 7924 |
%<*ignore> |
| 7925 |
% \fi |
| 7926 |
\begin{LTXexample} |
| 7927 |
\begin{pspicture}(3,2) |
| 7928 |
\psset{position=end, labeloffset=0} |
| 7929 |
\optbox(0,0.5)(1.5,0.5){1} |
| 7930 |
\optbox(0,1.5)(1.5,1.5){2} |
| 7931 |
\drawbeam(0,1){} |
| 7932 |
\end{pspicture} |
| 7933 |
\end{LTXexample} |
| 7934 |
% \iffalse |
| 7935 |
%</ignore> |
| 7936 |
% \fi |
| 7937 |
% |
| 7938 |
% \item |
| 7939 |
% \ifGERMAN |
| 7940 |
% Es können auch Zahlintervalle verwendet werden, gültige Intervallangaben sind |
| 7941 |
% \begin{description} |
| 7942 |
% \item[\parbox{2em}{\texttt{x-y}}] Von \opt{x} bis \opt{y}, ist \opt{x} |
| 7943 |
% größer als \opt{y}, so wird heruntergezählt. Ist der gesamte |
| 7944 |
% Bereich nicht definiert, dann wird ein Fehler ausgegeben. |
| 7945 |
% \item[\parbox{2em}{\texttt{x-}}] Von \opt{x} bis zur letzten Komponente. |
| 7946 |
% \item[\parbox{2em}{\texttt{\hphantom{x}-y}}] Von der ersten Komponente |
| 7947 |
% bis \opt{y}. Ist \opt{y} außerhalb des definierten Bereichs, dann |
| 7948 |
% wird eine Warnung ausgegeben. |
| 7949 |
% \item[\parbox{2em}{\texttt{\hphantom{x}-}}] Verbinde alle Komponenten. |
| 7950 |
% \end{description} |
| 7951 |
% \fi |
| 7952 |
% \ifENGLISH You can also use number ranges, valid range specifications are |
| 7953 |
% \begin{description} |
| 7954 |
% \item[\parbox{2em}{\texttt{x-y}}] From \opt{x} to \opt{y}, if \opt{x} |
| 7955 |
% is greater than \opt{y}, the numbers are decremented. If the whole |
| 7956 |
% range is not defined, an error is raised. |
| 7957 |
% \item[\parbox{2em}{\texttt{x-}}] From \opt{x} to the last component. |
| 7958 |
% \item[\parbox{2em}{\texttt{\hphantom{x}-y}}] From the first component |
| 7959 |
% to \opt{y}. If \opt{y} is outside the valid range, a warning is |
| 7960 |
% raised. |
| 7961 |
% \item[\parbox{2em}{\texttt{\hphantom{x}-}}] Connect all components. |
| 7962 |
% \end{description} |
| 7963 |
% \fi |
| 7964 |
% \iffalse |
| 7965 |
%<*ignore> |
| 7966 |
% \fi |
| 7967 |
\begin{LTXexample} |
| 7968 |
\begin{pspicture}(3,3) |
| 7969 |
\psset{position=end, optboxsize=0.5 0.5, bssize=0.5} |
| 7970 |
\optbox[compname=obj](0.5,0.5)(0.5,2.5){obj, 1} |
| 7971 |
\beamsplitter(0.5,2.5)(0.5,1)(2.5,1){2} |
| 7972 |
\optbox(0.5,1)(2.5,1){3} |
| 7973 |
\drawbeam{1-3} |
| 7974 |
\end{pspicture} |
| 7975 |
\end{LTXexample} |
| 7976 |
% \iffalse |
| 7977 |
%</ignore> |
| 7978 |
% \fi |
| 7979 |
% \end{enumerate} |
| 7980 |
% |
| 7981 |
% \ifENGLISH\section{Drawing beams}\fi |
| 7982 |
% \ifGERMAN\section{Strahlen zeichnen}\fi |
| 7983 |
% \label{sec:drawbeam} |
| 7984 |
% |
| 7985 |
% \ifENGLISH |
| 7986 |
% The package provides several ways to connect components and nodes with beams, |
| 7987 |
% which can be either single rays or wide beams. Most parameters have the same |
| 7988 |
% effect on both single and wide beams so most examples will be shown for |
| 7989 |
% single beams only. For options specific to wide beams please see |
| 7990 |
% \prettyref{sec:drawwidebeam}. |
| 7991 |
% \fi |
| 7992 |
% \ifGERMAN Es gibt mehrere Möglichkeiten Komponenten und Knoten mit Strahlen zu |
| 7993 |
% verbinden: einfache Linien oder ausgedehnte Strahlen. Die meisten Parameter |
| 7994 |
% haben für beide Typen dieselbe Bedeutung, daher beschränken sich die |
| 7995 |
% entsprechenden Beispiele auf die einfachen Strahlen. Die Parameter die nur |
| 7996 |
% ausgedehnte Strahlen betreffen, werden in \prettyref{sec:drawwidebeam} |
| 7997 |
% beschrieben. |
| 7998 |
% \fi |
| 7999 |
% |
| 8000 |
% \begin{ltxsyntax} |
| 8001 |
% \xLcs{drawbeam}\cmditem{drawbeam}[options]{obj$_1$}{obj$_2$}\ldots |
| 8002 |
% \xLcs{drawwidebeam}\cmditem*{drawwidebeam}[options]{obj$_1$}{obj$_2$}\ldots |
| 8003 |
% |
| 8004 |
% \ifENGLISH |
| 8005 |
% These are the two macros for beam connections; they can take a |
| 8006 |
% variable number of arguments (minimum of two) which can be either an |
| 8007 |
% ID, an ID range, a \Lkeyword{compname}, or a PSTricks nodes (see |
| 8008 |
% \prettyref{sec:accessobj}). To distinguish between nodes and |
| 8009 |
% components, nodes must be either enclosed in parenthesis within the |
| 8010 |
% brackets, or enclosed only in parenthesis: |
| 8011 |
% \Lcs{drawbeam}\opt{\{(node)\}\{comp\}}, or |
| 8012 |
% \Lcs{drawbeam}\opt{(node)\{comp\}}. |
| 8013 |
% \fi |
| 8014 |
% \ifGERMAN |
| 8015 |
% Diese beiden Makros sind für die Strahlverbindungen zuständig, sie |
| 8016 |
% akzeptieren eine variable Anzahl an Argumenten (mindestens zwei), |
| 8017 |
% die entweder eine ID, ein ID-Intervall, ein \Lkeyword{compname} oder |
| 8018 |
% ein PSTricks-Knoten sein können (siehe \prettyref{sec:accessobj}. Um |
| 8019 |
% zwischen Knoten und Komponenten unterscheiden zu können, müssen |
| 8020 |
% Knoten entweder in runde Klammern innerhalb der geschweiften |
| 8021 |
% Klammern eingeschlossen werden oder dürfen nur runde Klammern haben: |
| 8022 |
% \Lcs{drawbeam}\opt{\{(node)\}\{comp\}}, oder |
| 8023 |
% \Lcs{drawbeam}\opt{(node)\{comp\}}. |
| 8024 |
% \fi |
| 8025 |
% \end{ltxsyntax} |
| 8026 |
% |
| 8027 |
% \subsection{Raytracing}\label{sec:raytracing} |
| 8028 |
% \ifENGLISH |
| 8029 |
% The beam connection macros support two modes of tracing the beam across the |
| 8030 |
% optical components: one is to use refractive indices and Snell's law to |
| 8031 |
% determine the beam path. The other mode is to connect the components only, |
| 8032 |
% regardless of their optical properties. |
| 8033 |
% |
| 8034 |
% You must always keep in mind, that this is a package for \emph{sketching} |
| 8035 |
% experimental setups. Therefore, we do not provide a comprehensive raytracing |
| 8036 |
% framwork, because deviations from the actual physical path are often desired |
| 8037 |
% for sketches: beam angles and divergences should be in many cases more extreme |
| 8038 |
% than in the real setup in order to highlight certain aspects. You should also |
| 8039 |
% consider the refractive index (see \prettyref{sec:n}) only as a tool to |
| 8040 |
% optimize the visual effects of the beam path, and not stick with its |
| 8041 |
% physically correct values. |
| 8042 |
% \fi |
| 8043 |
% \ifGERMAN |
| 8044 |
% Der Strahlengang durch die Komponenten kann mit zwei unterschiedlichen |
| 8045 |
% Methoden ermittelt werden: über den Brechungsindex und das Snelliussche |
| 8046 |
% Brechungsgesetz, oder indem die Komponenten unabhängig von ihren optischen |
| 8047 |
% Eigenschaften einfach verbunden werden. |
| 8048 |
% |
| 8049 |
% Behalten Sie immer im Hinterkopf, dass dieses Paket für \emph{Skizzen} |
| 8050 |
% optischer Aufbauten gedacht ist und daher keine vollständige Umgebung zur |
| 8051 |
% Strahlverfolgung bereitstellt. Abweichungen vom physikalisch richtigen Weg |
| 8052 |
% können in vielen Fällen erwünscht sein: Winkel und Divergenzen werden häufig |
| 8053 |
% extremer dargestellt um bestimmte Effekte hervorzuheben. Daher sollten Sie den |
| 8054 |
% Brechungsindex (siehe \prettyref{sec:n}) lediglich as Mittel zur Optimierung |
| 8055 |
% des gewünschten Lichtweges sehen und nicht zu sehr an den physikalisch |
| 8056 |
% richtigen Werten festhalten. |
| 8057 |
% \fi |
| 8058 |
% |
| 8059 |
% \begin{optionlist} |
| 8060 |
% \boolitem[true]{raytrace} |
| 8061 |
% \ifENGLISH |
| 8062 |
% Chooses the mode of tracing the beam path, |
| 8063 |
% \opt{true} uses the refractive index («raytracing»), \opt{false} selects |
| 8064 |
% component connection («connect» mode). |
| 8065 |
% |
| 8066 |
% In most cases, the «connect» mode is equivalent to «raytracing» with |
| 8067 |
% \Lkeyword{n}\opt{=1}, except for \Lcomp{optprism} and \Lcomp{doveprism}, where |
| 8068 |
% the interface nodes (\prettyref{sec:ifcnode}) are simply connected. |
| 8069 |
% See the following two example for the differences between the tracing modes |
| 8070 |
% using these two components. The interface nodes are highlighted for clarity. |
| 8071 |
% |
| 8072 |
% The raytraced beam with \Lkeyword{n}\opt{=1} (blue) passes the component |
| 8073 |
% without changing its direction, the refraction for \Lkeyword{n}\opt{=1.5} is |
| 8074 |
% calculated (red), and the «connect» beam (green) just passes through the two |
| 8075 |
% interface nodes. |
| 8076 |
% \fi |
| 8077 |
% \ifGERMAN |
| 8078 |
% Wählt die Methode der Strahlverfolgung, mit \opt{true} wird der |
| 8079 |
% Brechungsindex («raytracing») verwendet, \opt{false} verbindet die |
| 8080 |
% Komponente lediglich («connect» Variante). |
| 8081 |
% |
| 8082 |
% In vielen Fällen ist «connect» identisch mit «raytracing» für |
| 8083 |
% \Lkeyword{n}\opt{=1}, außer für \Lcomp{optprism} oder \Lcomp{doveprism} bei |
| 8084 |
% denen die Grenzflächenknoten (\prettyref{sec:ifcnode}) dann einfach nur |
| 8085 |
% verbunden werden. Die folgenden beiden Beispiele zeigen die Unterschiede |
| 8086 |
% der beiden Methoden für diese Komponenten. Die Grenzflächenknoten sind zum |
| 8087 |
% besseren Verständnis hervorgehoben. |
| 8088 |
% |
| 8089 |
% Der «raytracing» Strahl mit \Lkeyword{n}\opt{=1} (blau) wird durch die |
| 8090 |
% Komponente transmittiert ohne die Richtung zu verändern, für |
| 8091 |
% \Lkeyword{n}\opt{=1.5} (rot) wird die Brechung an den Grenzflächen berechnet, |
| 8092 |
% und der «connect» Strahl (grün) durchläuft genau die Grenzflächenknoten. |
| 8093 |
% \fi |
| 8094 |
% |
| 8095 |
%\iffalse |
| 8096 |
%<*ignore> |
| 8097 |
%\fi |
| 8098 |
\begin{LTXexample}[linerange={1-7,9-9}] |
| 8099 |
\begin{pspicture}(3,2.2) |
| 8100 |
\pnodes(0,1.5){A}(1,1.5){B}(3,1){C} |
| 8101 |
\optprism[prismsize=1.2](A)(B)(C) |
| 8102 |
\optplane(C) |
| 8103 |
\drawbeam[n=1, linecolor=blue](A){1}{2} |
| 8104 |
\drawbeam[n=1.5, linecolor=red](A){1}{2} |
| 8105 |
\drawbeam[raytrace=false, linecolor=DGreen](A){1}{2} |
| 8106 |
\psdot(\oenodeIn{1})\psdot(\oenodeOut{1}) |
| 8107 |
\end{pspicture} |
| 8108 |
\end{LTXexample} |
| 8109 |
%\iffalse |
| 8110 |
%</ignore> |
| 8111 |
%\fi |
| 8112 |
% |
| 8113 |
% \ifENGLISH |
| 8114 |
% For the \Lcomp{doveprism} the same applies as for the \Lcomp{optprism}, but the |
| 8115 |
% raytraced beam with \Lkeyword{n}\opt{=1} (blue) misses the second interface |
| 8116 |
% because it is not refracted and stops therefore at the first interface (see |
| 8117 |
% \prettyref{sec:error-handling}). Again, the green «connect» ray passes through |
| 8118 |
% all interface nodes. |
| 8119 |
% \fi |
| 8120 |
% \ifGERMAN |
| 8121 |
% Das \Lcomp{doveprism} wird im Prinzip genauso behandelt wie das \Lcomp{optprism}, |
| 8122 |
% der «raytracing» Strahl mit \Lkeyword{n}\opt{=1} (blau) trifft wegen fehlender |
| 8123 |
% Brechung die zweite Grenzfläche gar nicht, und endet daher schon an der ersten |
| 8124 |
% Grenzflächen (siehe \prettyref{sec:error-handling}). Der grüne «connect» |
| 8125 |
% Strahl verläuft wieder durch die Grenzflächenknoten. |
| 8126 |
% \fi |
| 8127 |
% |
| 8128 |
%\iffalse |
| 8129 |
%<*ignore> |
| 8130 |
%\fi |
| 8131 |
\begin{LTXexample}[linerange={1-6,8-8}] |
| 8132 |
\begin{pspicture}(4,2) |
| 8133 |
\pnodes(0,1){A}(4,1){B} |
| 8134 |
\doveprism[doveprismsize=1](A)(B) |
| 8135 |
\drawbeam[n=1, linecolor=blue, beampos=0.1](A){1}(B) |
| 8136 |
\drawbeam[n=1.5, linecolor=red](A){1}(B) |
| 8137 |
\drawbeam[raytrace=false, linecolor=DGreen](A){1}(B) |
| 8138 |
\psdot(\oenodeIn{1})\psdot(\oenodeIfc{2}{1})\psdot(\oenodeOut{1}) |
| 8139 |
\end{pspicture} |
| 8140 |
\end{LTXexample} |
| 8141 |
% \iffalse |
| 8142 |
%</ignore> |
| 8143 |
% \fi |
| 8144 |
% |
| 8145 |
% \ifGERMAN |
| 8146 |
% Für «connect» können auch unterschiedliche Anfangsbedingungen |
| 8147 |
% (\ref{prm:beampos}) verwendet werden. |
| 8148 |
% \fi |
| 8149 |
% \ifENGLISH |
| 8150 |
% The «connect» mode also supports changing the initial conditions |
| 8151 |
% (\ref{prm:beampos}). |
| 8152 |
% \fi |
| 8153 |
%\iffalse |
| 8154 |
%<*ignore> |
| 8155 |
%\fi |
| 8156 |
\begin{LTXexample}[linerange={1-7,9-9}, morekeywords={[21]beampos,beamangle}] |
| 8157 |
\begin{pspicture}(3.7,2) |
| 8158 |
\pnodes(0,1){A}(4,1){B} |
| 8159 |
\doveprism[doveprismsize=1](A)(B) |
| 8160 |
\psset[optexp]{raytrace=false} |
| 8161 |
\drawbeam[linecolor=blue, beampos=0.2, beamangle=-10](A){1}(B) |
| 8162 |
\drawbeam[raytrace=false, linecolor=DGreen](A){1}(B) |
| 8163 |
\drawbeam[linecolor=red, beampos=-0.2, beamangle=10](A){1}(B) |
| 8164 |
\psdot(\oenodeIn{1})\psdot(\oenodeIfc{2}{1})\psdot(\oenodeOut{1}) |
| 8165 |
\end{pspicture} |
| 8166 |
\end{LTXexample} |
| 8167 |
\begin{LTXexample}[linerange={1-7,9-9}, morekeywords={[21]beampos,beamangle}] |
| 8168 |
\begin{pspicture}(3.7,2) |
| 8169 |
\pnodes(0,1){A}(4,1){B} |
| 8170 |
\doveprism[doveprismsize=1](A)(B) |
| 8171 |
\psset[optexp]{raytrace=false} |
| 8172 |
\drawbeam[linecolor=blue, beampos=0.2](A){1}(B) |
| 8173 |
\drawbeam[linecolor=DGreen](A){1}(B) |
| 8174 |
\drawbeam[linecolor=red, beampos=-0.2](A){1}(B) |
| 8175 |
\psdot(\oenodeIn{1})\psdot(\oenodeIfc{2}{1})\psdot(\oenodeOut{1}) |
| 8176 |
\end{pspicture} |
| 8177 |
\end{LTXexample} |
| 8178 |
% \iffalse |
| 8179 |
%</ignore> |
| 8180 |
% \fi |
| 8181 |
% |
| 8182 |
% \boolitem[true]{useNA} |
| 8183 |
% \ifGERMAN Ein Strahlengang wird abgebrochen, falls eine Komponente nicht |
| 8184 |
% getroffen wird. Für manche Zwecke, z.B. zum Ermitteln des richtigen |
| 8185 |
% Brechungsindex, kann es sinnvoll sein, wenn die numerische Apertur eine |
| 8186 |
% Komponente nicht berücksichtigt wird. In dem folgenden Beispiel wird der |
| 8187 |
% rote Strahl gezeichnet, obwohl er außerhalb der gezeichneten Spiegelfläche |
| 8188 |
% liegt. |
| 8189 |
% \fi |
| 8190 |
% \ifENGLISH The beam path is interrupted if an interface is missed. In some |
| 8191 |
% cases, e.g. to estimate the correct refractive index for a ray trace, it can |
| 8192 |
% be useful if the numerical aperture of the components is not considered. The |
| 8193 |
% red beam in the following example is drawn, although it hits the mirror |
| 8194 |
% outside the drawn mirror surface. |
| 8195 |
% \fi |
| 8196 |
% \iffalse |
| 8197 |
%<*ignore> |
| 8198 |
% \fi |
| 8199 |
\begin{LTXexample} |
| 8200 |
\begin{pspicture}(3,2) |
| 8201 |
\pnodes(0,0.5){A}(2.5,0.5){B}(2.5,2){C} |
| 8202 |
\mirror(A)(B)(C) |
| 8203 |
\psset{useNA=false} |
| 8204 |
\drawbeam(A){}(C) |
| 8205 |
\drawbeam[linecolor=red, beamangle=10](A){}(C) |
| 8206 |
\end{pspicture} |
| 8207 |
\end{LTXexample} |
| 8208 |
% \iffalse |
| 8209 |
%</ignore> |
| 8210 |
% \fi |
| 8211 |
% |
| 8212 |
% \end{optionlist} |
| 8213 |
% |
| 8214 |
% \ifENGLISH\subsection{Refractive index}\fi |
| 8215 |
% \ifGERMAN\subsection{Brechungsindex}\fi |
| 8216 |
% \label{sec:n} |
| 8217 |
% |
| 8218 |
% \ifENGLISH |
| 8219 |
% The raytracing depends on the refractive index, which may be set for each |
| 8220 |
% component separately. The refractive index is always relative to the |
| 8221 |
% background which has a constant value for the whole sketch. |
| 8222 |
% \fi |
| 8223 |
% \ifGERMAN |
| 8224 |
% Das Raytracing wird durch den Brechungsindex bestimmt, der für jede Komponente |
| 8225 |
% einzeln gesetzt werden kann. Der Wert ist relativ zum Hintergrund, für den ein |
| 8226 |
% konstanter Wert für die gesamte Skizze angenommen wird. |
| 8227 |
% \fi |
| 8228 |
% |
| 8229 |
% \begin{optionlist} |
| 8230 |
% \valitem[1.5]{n}{code} |
| 8231 |
% \ifGERMAN |
| 8232 |
% Setzt den Brechungsindex relativ zum Hintergrund. Diese Option hat zwei |
| 8233 |
% Anwendungsbereiche: zum einen kann der Index einer Komponente gesetzt werden, |
| 8234 |
% zum anderen der Brechungsindex für einen Strahlengang: |
| 8235 |
% \fi |
| 8236 |
% \ifENGLISH Sets the relative refractive index respect to the background. This |
| 8237 |
% parameter has two scopes, you can either set the refractive index of each |
| 8238 |
% component or of each beam ray: |
| 8239 |
% \fi |
| 8240 |
% \end{optionlist} |
| 8241 |
% |
| 8242 |
% \ifGERMAN |
| 8243 |
% \begin{enumerate} |
| 8244 |
% \item Wird \Lkeyword{n} als globaler Parameter oder als Komponentenparameter |
| 8245 |
% verwendet, so wird der Index für alle betroffenen Komponenten gesetzt. Ohne |
| 8246 |
% weitere Änderungen wird jeder Lichtstrahl diese Werte verwenden. |
| 8247 |
% \item Als Parameter zu \Lcs{drawbeam} oder \Lcs{drawwidebeam} kann der |
| 8248 |
% Brechungsindex der Komponenten für einzelne Strahlengänge überschrieben oder |
| 8249 |
% geändert werden. Das kann sehr nützlich sein, um z.B. chromatische |
| 8250 |
% Dispersion zu illustrieren. Soll die Änderung global für alle oder mehrere |
| 8251 |
% Lichtstrahlen wirksam sein, so muss der gewünschte Wert dem |
| 8252 |
% \Lstyle{Beam}-Stil hinzugefügt werden, da globale Definitionen von |
| 8253 |
% \Lkeyword{n} nur die Komponenten betreffen. |
| 8254 |
% \end{enumerate} |
| 8255 |
% \fi |
| 8256 |
% \ifENGLISH |
| 8257 |
% \begin{enumerate} |
| 8258 |
% \item Using \Lkeyword{n} as global parameter or component argument |
| 8259 |
% sets a fixed refractive index for each affected component. Without further |
| 8260 |
% actions, all beam paths experience this refractive index. |
| 8261 |
% \item As parameter for \Lcs{drawbeam} or \Lcs{drawwidebeam} you can overwrite |
| 8262 |
% or even change the refractive index of the components for specific beam |
| 8263 |
% paths. This can be very useful e.g. to simulate chromatic dispersion. To set |
| 8264 |
% this globally for all beams you must add the respective parameter |
| 8265 |
% definition to the \Lstyle{Beam} style because global definitions of |
| 8266 |
% \Lkeyword{n} affect only the components and not the beams. |
| 8267 |
% \end{enumerate} |
| 8268 |
% \fi |
| 8269 |
% |
| 8270 |
% \ifENGLISH |
| 8271 |
% The \prm{code} can in general be any Postscript code which evaluates to a |
| 8272 |
% number, e.g. \opt{1.5}, or \opt{5 sqrt}. If the \prm{code} starts with a |
| 8273 |
% \opt{*}, it will be interpreted as an algebraic |
| 8274 |
% expression\fnurl{http://mirror.ctan.org/graphics/pstricks/base/doc/pst-news08.pdf}, |
| 8275 |
% e.g. \opt{*sqrt(5)} is equivalent to \opt{5 sqrt}. Inside the \prm{code} you |
| 8276 |
% can access the predefined refractive index of the component via \opt{n} which |
| 8277 |
% allows you to change the index relative to its original value. Use |
| 8278 |
% e.g. \opt{n=n 1.01 mul} to change \opt{n} by one percent. |
| 8279 |
% |
| 8280 |
% In the following you find several examples about the different aspects of |
| 8281 |
% using \Lkeyword{n}. |
| 8282 |
% \fi |
| 8283 |
% \ifGERMAN |
| 8284 |
% Der \prm{code} kann jeglicher Postscript-Kode sein, der zu einer Zahl |
| 8285 |
% ausgewertet werden kann, also z.B. \opt{1.5} oder \opt{5 sqrt}. Beginnt |
| 8286 |
% \prm{code} mit einem \opt{*}, so wird der Code als algebraischer |
| 8287 |
% Ausdruck\fnurl{http://mirror.ctan.org/graphics/pstricks/base/doc/pst-news08.pdf} |
| 8288 |
% ausgewertet, d.h. \opt{*sqrt(5)} ist äquivalent zu \opt{5 sqrt}. Innerhalb von |
| 8289 |
% \prm{code} kann mit \opt{n} auf den vordefinierten Brechungsindex der |
| 8290 |
% Komponenten zugegriffen werden, es kann also eine Änderung relativ zum |
| 8291 |
% ursprünglichen Wert erzielt werden. Mit \opt{n=n 1.01 mul} kann \opt{n} |
| 8292 |
% z.B. um ein Prozent geändert werden. |
| 8293 |
% |
| 8294 |
% In den folgenden Beispielen werden diese unterschiedlichen Möglichkeiten von |
| 8295 |
% \Lkeyword{n} gezeigt. |
| 8296 |
% \fi |
| 8297 |
% |
| 8298 |
% \begin{enumerate} |
| 8299 |
% \item |
| 8300 |
% \ifENGLISH Set a fixed refractive index for the component. Interestingly, |
| 8301 |
% for the default shape of the \Lcomp{doveprism} a refractive index of |
| 8302 |
% $\sqrt{5}$ gives the ideal output direction which is the same as the input |
| 8303 |
% direction. |
| 8304 |
% \fi |
| 8305 |
% \ifGERMAN |
| 8306 |
% Setze den Brechungsindex einer Komponente. Interessanterweise ist für die |
| 8307 |
% Standardform des \Lcomp{doveprism} ein Brechungsindex von $\sqrt{5}$ der |
| 8308 |
% ideale Wert so dass der Ausgangsstrahl parallel zum Eingangsstrahl verläuft. |
| 8309 |
% \fi |
| 8310 |
% |
| 8311 |
% \iffalse |
| 8312 |
%<*ignore> |
| 8313 |
% \fi |
| 8314 |
\begin{LTXexample} |
| 8315 |
\begin{pspicture}(3,1.5) |
| 8316 |
\pnodes(0,1){A}(3,1){B} |
| 8317 |
\doveprism[n=*sqrt(5)](A)(B) |
| 8318 |
\drawbeam(A){}(B) |
| 8319 |
\end{pspicture} |
| 8320 |
\end{LTXexample} |
| 8321 |
% \iffalse |
| 8322 |
%</ignore> |
| 8323 |
% \fi |
| 8324 |
% |
| 8325 |
% \item |
| 8326 |
% \ifENGLISH In this example one beam uses the default refractive index of the |
| 8327 |
% components (green), the other one overwrites it with a value of \opt{2} |
| 8328 |
% (red). |
| 8329 |
% \fi |
| 8330 |
% \ifGERMAN |
| 8331 |
% Ein Strahl (grün) verwendet die voreingestellten Werte der Komponenten, der |
| 8332 |
% rote überschreibt diese mit \opt{2}. |
| 8333 |
% \fi |
| 8334 |
% \iffalse |
| 8335 |
%<*ignore> |
| 8336 |
% \fi |
| 8337 |
\begin{LTXexample}[morekeywords = {[21]{n}}] |
| 8338 |
\begin{pspicture}(3,3) |
| 8339 |
\pnodes(0,1){A}(3,1){B} |
| 8340 |
\optplane(A) |
| 8341 |
\psset{lens=3 3 2, n=1.5} |
| 8342 |
\lens[abspos=0.5](A)(B) |
| 8343 |
\lens[abspos=2](A)(B) |
| 8344 |
\optplane(B) |
| 8345 |
\addtopsstyle{Beam}{beampos=0.5} |
| 8346 |
\drawbeam{-} |
| 8347 |
\drawbeam[linecolor=red, n=2]{-} |
| 8348 |
\end{pspicture} |
| 8349 |
\end{LTXexample} |
| 8350 |
% \iffalse |
| 8351 |
%</ignore> |
| 8352 |
% \fi |
| 8353 |
% |
| 8354 |
% \item |
| 8355 |
% \ifENGLISH |
| 8356 |
% Now, the red beam uses the default refractive index of the component, the |
| 8357 |
% yellow beam adds \opt{0.5} to the default index. |
| 8358 |
% \fi |
| 8359 |
% \ifGERMAN |
| 8360 |
% Der rote Strahl verwendet die voreingestellten Werte, der grüne ändert diese |
| 8361 |
% um \opt{0.5}. |
| 8362 |
% \fi |
| 8363 |
% \iffalse |
| 8364 |
%<*ignore> |
| 8365 |
% \fi |
| 8366 |
\begin{LTXexample}[morekeywords = {[21]{n}}] |
| 8367 |
\begin{pspicture}(3,3) |
| 8368 |
\pnodes(0,1.5){A}(3,1.5){B} |
| 8369 |
\lens[lens=4 4 3, n=2, abspos=0.3](A)(B) |
| 8370 |
\optplane[compname=Plane](B) |
| 8371 |
\psset{beampos=0.6} |
| 8372 |
\drawbeam[linecolor=red](A){1}{Plane} |
| 8373 |
\drawbeam[linecolor=yellow, n=*(n+0.5)](A){1}{Plane} |
| 8374 |
\end{pspicture} |
| 8375 |
\end{LTXexample} |
| 8376 |
% \iffalse |
| 8377 |
%</ignore> |
| 8378 |
% \fi |
| 8379 |
% |
| 8380 |
% \item |
| 8381 |
% \ifENGLISH |
| 8382 |
% Dynamically changing the refractive index is very useful to emulate |
| 8383 |
% chromatic dispersion. Here, we sketch the dispersion of a prism by |
| 8384 |
% calculating the refractive index with Sellmaier's |
| 8385 |
% equation\fnurl{http://en.wikipedia.org/wiki/Sellmeier_equation} for |
| 8386 |
% different wavelengths. |
| 8387 |
% \fi |
| 8388 |
% \ifGERMAN |
| 8389 |
% Mit dynamischer Anpassung von \Lkeyword{n} kann chromatische Dispersion sehr |
| 8390 |
% gut emuliert werden. Hier wird die Dispersion eines Prisma gezeigt, der |
| 8391 |
% Brechungsindex wird mit der Sellmaier |
| 8392 |
% Gleichung\fnurl{http://en.wikipedia.org/wiki/Sellmeier_equation} für die |
| 8393 |
% unterschiedlichen Wellenlängen berechnet. |
| 8394 |
% \fi |
| 8395 |
% \iffalse |
| 8396 |
%<*ignore> |
| 8397 |
% \fi |
| 8398 |
\begin{LTXexample}[morekeywords = {[21]{n}}] |
| 8399 |
\begin{pspicture}(3,3) |
| 8400 |
\pnodes(-1,0){A}(1,2.2){B}(3,0){C} |
| 8401 |
\optplane(0,2.15) |
| 8402 |
\optprism[prismalign=center, prismangle=59](A)(B)(C) |
| 8403 |
\optplane(C) |
| 8404 |
\definecolor[ps]{bl}{rgb}{% |
| 8405 |
tx@addDict begin tx@OptexpDict begin |
| 8406 |
Wavelength wavelengthToRGB |
| 8407 |
Red Green Blue |
| 8408 |
end end }% |
| 8409 |
\addtopsstyle{Beam}{linecolor=bl, linewidth=0.4\pslinewidth, beamalign=abs} |
| 8410 |
\multido{\iLambda=400+4}{60}{% |
| 8411 |
\pstVerb{/Wavelength \iLambda\space def }% |
| 8412 |
\drawbeam[n=Wavelength Sellmaier]{-}% |
| 8413 |
}% |
| 8414 |
\end{pspicture} |
| 8415 |
\end{LTXexample} |
| 8416 |
% \iffalse |
| 8417 |
%</ignore> |
| 8418 |
% \fi |
| 8419 |
% |
| 8420 |
% \item |
| 8421 |
% \ifENGLISH Using the numerical aperture of a pinhole as spectral filter.\fi |
| 8422 |
% \ifGERMAN Die numerische Apertur einer Lochblende als spektraler Filter.\fi |
| 8423 |
% |
| 8424 |
% \iffalse |
| 8425 |
%<*ignore> |
| 8426 |
% \fi |
| 8427 |
\begin{LTXexample}[morekeywords = {[21]{n}}] |
| 8428 |
\begin{pspicture}(0.3,0)(3.3,5.2) |
| 8429 |
\pnodes(0.3,1){A}(2,1){B}(3,2){C}(2.5,5){D} |
| 8430 |
\optplane(A) |
| 8431 |
\optgrating[reverse](A)(B)(C) |
| 8432 |
\pinhole[phwidth=-0.1, innerheight=0.03, abspos=0.5](D)(B) |
| 8433 |
\optplate[position=end, plateheight=1.5](B)(D) |
| 8434 |
\definecolor[ps]{bl}{rgb}{% |
| 8435 |
tx@addDict begin Red Green Blue end}% |
| 8436 |
\drawbeam[linecolor=red]{1-2} |
| 8437 |
\addtopsstyle{Beam}{linecolor=bl, linewidth=0.4\pslinewidth} |
| 8438 |
\multido{\i=0+1}{60}{% |
| 8439 |
\pstVerb{% |
| 8440 |
\i\space 650 400 sub 59 div mul 400 add |
| 8441 |
tx@addDict begin wavelengthToRGB end }% |
| 8442 |
\drawbeam[beamangle=\i\space 0.1 mul 3 sub]{2-}% |
| 8443 |
}% |
| 8444 |
\end{pspicture} |
| 8445 |
\end{LTXexample} |
| 8446 |
% \iffalse |
| 8447 |
%</ignore> |
| 8448 |
% \fi |
| 8449 |
% \end{enumerate} |
| 8450 |
% |
| 8451 |
% \begin{optionlist} |
| 8452 |
% \valitem{refractiveindex}{code} |
| 8453 |
% \deprecatedmsg{\Lkeyword{n}} |
| 8454 |
% \end{optionlist} |
| 8455 |
% |
| 8456 |
% \ifENGLISH\subsection{Initial conditions}\fi |
| 8457 |
% \ifGERMAN\subsection{Anfangsbedingungen}\fi |
| 8458 |
% |
| 8459 |
% \begin{optionlist} |
| 8460 |
% \optitem[0]{beampos}{[\prm{x} ]\prm{y}} |
| 8461 |
% \ifENGLISH |
| 8462 |
% This is the start position (\prm{x}, \prm{y}) of the beam at the first |
| 8463 |
% interface. Both values are of \prm{psnum} type. If a single number is given, |
| 8464 |
% the $x$-coordinate is set to \opt{0}. |
| 8465 |
% \fi |
| 8466 |
% \ifGERMAN |
| 8467 |
% Die Startposition (\prm{x}, \prm{y}) des Strahls an der ersten |
| 8468 |
% Grenzfläche. Beide Zahlen sind vom Typ \prm{psnum}. Wird eine einzelne Zahl |
| 8469 |
% angegeben, wird die $x$-Koordinate auf \opt{0} gesetzt. |
| 8470 |
% \fi |
| 8471 |
% |
| 8472 |
% \iffalse |
| 8473 |
%<*ignore> |
| 8474 |
% \fi |
| 8475 |
\begin{LTXexample}[morekeywords = {[21]{beampos}}] |
| 8476 |
\begin{pspicture}(4,3.8) |
| 8477 |
\pnodes(1.5,0.5){A}(3.5,0.5){B}(3.5,3.5){C} |
| 8478 |
\optbox[position=end](B)(A) |
| 8479 |
\mirror[mirrortype=extended, mirrorradius=3](A)(B)(C) |
| 8480 |
\optplate[position=end](B)(C) |
| 8481 |
\drawbeam[linecolor=red, beampos=-0.2]{1-3} |
| 8482 |
\drawbeam[linecolor=blue, beampos=0]{1-3} |
| 8483 |
\drawbeam[linecolor=green, beampos=0.2]{1-3} |
| 8484 |
\end{pspicture} |
| 8485 |
\end{LTXexample} |
| 8486 |
% \iffalse |
| 8487 |
%</ignore> |
| 8488 |
% \fi |
| 8489 |
% |
| 8490 |
% \ifENGLISH The start position is relative to the respective interface node, as |
| 8491 |
% it is illustrated in the following example. The beam start position is fixed, |
| 8492 |
% but depending on e.g. the \Lkeyword{beamangle}, the actual intersection with |
| 8493 |
% the curved interface is at a different position. |
| 8494 |
% \fi |
| 8495 |
% \ifGERMAN |
| 8496 |
% Die Startposition ist relativ zum entsprechenden Grenzflächenknoten, wie im |
| 8497 |
% folgenden Beispiel gezeigt wird. Die Startposition ist fest, abhängig z.B. von |
| 8498 |
% \Lkeyword{beamangle} kann der eigentliche Schnittpunkt mit der ersten |
| 8499 |
% Grenzfläche jedoch anders sein. |
| 8500 |
% \fi |
| 8501 |
% |
| 8502 |
% \iffalse |
| 8503 |
%<*ignore> |
| 8504 |
% \fi |
| 8505 |
\begin{LTXexample}[linerange={1-7,9-9}, morekeywords = {[21]{beampos}}, explpreset={escapeinside={}}] |
| 8506 |
\begin{pspicture*}(0,2)(3.05,6) |
| 8507 |
\lens[lens=8 8 8, abspos=0.6](0.5,2)(3,2) |
| 8508 |
\optplate[position=1, plateheight=6](0.5,2)(3,2) |
| 8509 |
\psset{beampos=2.1} |
| 8510 |
\drawbeam[beamangle=-60]{1}{2} |
| 8511 |
\drawbeam[beamangle=-40]{1}{2} |
| 8512 |
\drawbeam[beamangle=-20]{1}{2} |
| 8513 |
\psline[style=Refline, linewidth=3\pslinewidth, arrows=->, arrowinset=0, arrowscale=1.3](\oenodeOut{1})([offset=2.1]\oenodeOut{1}) |
| 8514 |
\end{pspicture*} |
| 8515 |
\end{LTXexample} |
| 8516 |
% \iffalse |
| 8517 |
%</ignore> |
| 8518 |
% \fi |
| 8519 |
% |
| 8520 |
% \ifENGLISH |
| 8521 |
% Which interface the beam starts at is determined by the options |
| 8522 |
% \Lkeyword{beaminsidefirst} and \Lkeyword{startinside}. |
| 8523 |
% \fi |
| 8524 |
% \ifGERMAN |
| 8525 |
% An welcher Grenzfläche der ersten Komponente gestartet wird hängt von |
| 8526 |
% \Lkeyword{beaminsidefirst} und \Lkeyword{startinside} ab. |
| 8527 |
% \fi |
| 8528 |
% |
| 8529 |
% \psnumitem[0]{beamangle} |
| 8530 |
% \ifGERMAN |
| 8531 |
% Der Anfangswinkel des Strahls. Dieser ist in der Regel relativ zu der |
| 8532 |
% Verbindung von der ersten zur zweiten Komponente, mit \Lkeyword{beamalign} |
| 8533 |
% kann dieses Verhalten verändert werden. |
| 8534 |
% \fi |
| 8535 |
% \ifENGLISH |
| 8536 |
% This is the start angle of the beam. Usually, it is relative to the connection |
| 8537 |
% between the first two components, use \Lkeyword{beamalign} to change this. |
| 8538 |
% \fi |
| 8539 |
% \iffalse |
| 8540 |
%<*ignore> |
| 8541 |
% \fi |
| 8542 |
\begin{LTXexample}[morekeywords = {[21]{beamangle}}] |
| 8543 |
\begin{pspicture}(4,4) |
| 8544 |
\pnodes(1.5,0.5){A}(3.5,0.5){B}(3.5,3.5){C} |
| 8545 |
\optbox[position=end](B)(A) |
| 8546 |
\mirror[mirrortype=extended](A)(B)(C) |
| 8547 |
\optplate[position=end](B)(C) |
| 8548 |
\drawbeam[linecolor=red, beamangle=3]{-3} |
| 8549 |
\drawbeam[linecolor=blue, beamangle=0]{1-} |
| 8550 |
\drawbeam[linecolor=green, beamangle=-3]{-} |
| 8551 |
\end{pspicture} |
| 8552 |
\end{LTXexample} |
| 8553 |
% \iffalse |
| 8554 |
%</ignore> |
| 8555 |
% \fi |
| 8556 |
% |
| 8557 |
% \choitem[relative]{beamalign}{rel, relative, abs, absolute, firstcomp} |
| 8558 |
% \ifGERMAN |
| 8559 |
% Gibt vor, ob der Winkel \Lkeyword{beamangle} relativ zu der Verbindung |
| 8560 |
% zwischen den ersten beiden Komponenten ist, ob es sich um einen |
| 8561 |
% absoluten Winkel handelt, oder ob der Winkel durch die Ausrichtung der |
| 8562 |
% ersten Komponente vorgegeben wird. |
| 8563 |
% |
| 8564 |
% Ein absoluter Winkel kann sehr hilfreich sein, falls eine der beiden ersten |
| 8565 |
% Komponenten gedreht oder verschoben wurde. Dabei werden die |
| 8566 |
% Grenzflächenknoten, auf die sich ein relativer Winkel bezieht, ebenfalls |
| 8567 |
% transformiert (siehe \prettyref{sec:rotshift}). In dem folgenden Beispiel |
| 8568 |
% verläuft daher der grüne Strahl mit der relativen Ausrichtung nicht |
| 8569 |
% horizontal. |
| 8570 |
% \fi |
| 8571 |
% \ifENGLISH |
| 8572 |
% Select whether the \Lkeyword{beamangle} is relative to the connection between |
| 8573 |
% the first two components, or if it is an absolute angle. |
| 8574 |
% |
| 8575 |
% A typical situation where an absolute angle is helpful is with rotated or |
| 8576 |
% shifted components. By rotating or shifting a component also its interface |
| 8577 |
% nodes are rotated (see \prettyref{sec:rotshift}) which are then used to |
| 8578 |
% determine the input angle for relative alignment. Accordingly, in the |
| 8579 |
% following example, the green beam with the relative alignment is not |
| 8580 |
% horizontal. |
| 8581 |
% \fi |
| 8582 |
% \iffalse |
| 8583 |
%<*ignore> |
| 8584 |
% \fi |
| 8585 |
\begin{LTXexample}[morekeywords = {[21]{beamalign, angle}}] |
| 8586 |
\begin{pspicture}(3,1.5) |
| 8587 |
\pnodes(0,0.75){A}(3,0.75){B} |
| 8588 |
\optbox[angle=10, showifcnodes](A)(B) |
| 8589 |
\drawbeam(A){}(B) |
| 8590 |
\drawbeam[linecolor=red, beamalign=abs](A){}(B) |
| 8591 |
\end{pspicture} |
| 8592 |
\end{LTXexample} |
| 8593 |
% \iffalse |
| 8594 |
%</ignore> |
| 8595 |
% \fi |
| 8596 |
% |
| 8597 |
% \ifGERMAN |
| 8598 |
% Im folgenden Beispiel liegen beide Komponenten auf der horizontalen |
| 8599 |
% Linie $\overline{AB}$. Der grüne Strahl, mit |
| 8600 |
% \Lkeyword{beamalign}\opt{=rel} verläuft daher auch horizontal. Der |
| 8601 |
% rote Strahl ist hingegen mit \Lkeyword{beamalign}\opt{=firstcomp} |
| 8602 |
% entsprechend der Drehung der ersten Komponente ausgerichtet. |
| 8603 |
% \fi |
| 8604 |
% \ifENGLISH |
| 8605 |
% Both components in the following example are align on the horizontal |
| 8606 |
% line $\overline{AB}$. The green beam with |
| 8607 |
% \Lkeyword{beamalign}\opt{=rel} is accordingly aligned |
| 8608 |
% horizontally. The red beam with \Lkeyword{beamalign}\opt{=firstcomp} |
| 8609 |
% is aligned according to the rotation of the first component: |
| 8610 |
% \fi |
| 8611 |
% |
| 8612 |
% \iffalse |
| 8613 |
%<*ignore> |
| 8614 |
% \fi |
| 8615 |
\begin{LTXexample}[morekeywords = {[21]{beamalign, angle}}] |
| 8616 |
\begin{pspicture}(4,3) |
| 8617 |
\pnodes(1.5,1.5){A}(4,1.5){B} |
| 8618 |
\optbox[position=start, rotateref=r, angle=10](A)(B) |
| 8619 |
\optplate[position=end, plateheight=3](A)(B) |
| 8620 |
\addtopsstyle{Beam}{beamdiv=20} |
| 8621 |
\drawwidebeam{-} |
| 8622 |
\drawwidebeam[beamalign=firstcomp, linecolor=red]{-} |
| 8623 |
\end{pspicture} |
| 8624 |
\end{LTXexample} |
| 8625 |
% \iffalse |
| 8626 |
%</ignore> |
| 8627 |
% \fi |
| 8628 |
% |
| 8629 |
% \numitem[0]{beampathskip} |
| 8630 |
% \ifGERMAN |
| 8631 |
% Überspringt \prm{num} Segmente am Anfang des Strahlengangs. Diese |
| 8632 |
% Option beinflusst lediglich ab welchem Segment der Strahlgang |
| 8633 |
% gezeichnet wird, das Raytracing beginnt immer noch an der ersten |
| 8634 |
% Grenzfläche. Um das zu ändern können Sie \Lkeyword{startinsidecount} |
| 8635 |
% verwenden. |
| 8636 |
% \fi |
| 8637 |
% \ifENGLISH |
| 8638 |
% Skip \prm{num} segments at the beginning of the beam path. This option |
| 8639 |
% determines only at which segment the beam is drawn, the ray tracing |
| 8640 |
% always starts at the first interface. To change this, see option |
| 8641 |
% \Lkeyword{startinsidecount}. |
| 8642 |
% \fi |
| 8643 |
% \iffalse |
| 8644 |
%<*ignore> |
| 8645 |
% \fi |
| 8646 |
\begin{LTXexample}[morekeywords = {[21]{beampathskip}}, pos=t] |
| 8647 |
\begin{pspicture}(5,2) |
| 8648 |
\pnodes(0,1){A}(5,1){B}(2,0){C} |
| 8649 |
\begin{optexp} |
| 8650 |
\glanthompson(A)(B) |
| 8651 |
\optplane(B)\optplane[angle=90](C) |
| 8652 |
\polarization[abspos=1, poltype=misc, linecolor=yellow!80!black](A)(B) |
| 8653 |
\drawbeam[beaminsidelast, linecolor=yellow!80!black](A){1} |
| 8654 |
\drawbeam[beampathskip=2](A){1-2} |
| 8655 |
\drawbeam[beampathskip=2, savebeam, linestyle=dashed, dash=2pt 2pt, linecolor=red,arrowscale=1.5, arrows=->](A){1}{3} |
| 8656 |
\end{optexp} |
| 8657 |
\nodexn{(\oenodeBeam{})-1.5(!\oeBeamVec{})}{D} |
| 8658 |
\polarization[poltype=parallel, linecolor=red](D)(\oenodeBeam{}) |
| 8659 |
\polarization[abspos=4, poltype=perp, linecolor=green, dotscale=1.5](A)(B) |
| 8660 |
\end{pspicture} |
| 8661 |
\end{LTXexample} |
| 8662 |
% \iffalse |
| 8663 |
%</ignore> |
| 8664 |
% \fi |
| 8665 |
% |
| 8666 |
% \numitem[-1]{beampathcount} |
| 8667 |
% \ifGERMAN |
| 8668 |
% Anzahl der Strahlsegmente, die gezeichnet werden sollen. Werden am |
| 8669 |
% Anfang Segmente mit \Lkeyword{beampathskip} übersprungen, so werden |
| 8670 |
% diese nicht mitgezählt. |
| 8671 |
% \fi |
| 8672 |
% \ifENGLISH |
| 8673 |
% Number of beam segments, which are drawn. Segments which are skipped |
| 8674 |
% at the beam start with \Lkeyword{beampathskip} do not count. |
| 8675 |
% \fi |
| 8676 |
% \iffalse |
| 8677 |
%<*ignore> |
| 8678 |
% \fi |
| 8679 |
\begin{LTXexample}[morekeywords = {[21]{beampathcount}}] |
| 8680 |
\begin{pspicture}(3,2) |
| 8681 |
\pnodes(0,2){A}(2,0.8){B}(4,2){C} |
| 8682 |
\optprism[compname=P, prismtype=reflective, prismangle=90](A)(B)(C) |
| 8683 |
\lens[abspos=1.33](\oenodeIfc{2}{P})(A)% |
| 8684 |
\drawwidebeam[beamwidth=0.2, beaminsidelast, beampathcount=4](A){2}{1} |
| 8685 |
\end{pspicture} |
| 8686 |
\end{LTXexample} |
| 8687 |
% \iffalse |
| 8688 |
%</ignore> |
| 8689 |
% \fi |
| 8690 |
% \end{optionlist} |
| 8691 |
% |
| 8692 |
% \ifGERMAN\subsection{Interner Strahlengang}\fi |
| 8693 |
% \ifENGLISH\subsection{Internal beam path}\fi |
| 8694 |
% |
| 8695 |
% \ifENGLISH |
| 8696 |
% A beam path is composed of rays between components and rays inside the |
| 8697 |
% components. Depending on some options these internal beams can be drawn or |
| 8698 |
% not. Generally, the first, the last, and all other components are treated |
| 8699 |
% separately. |
| 8700 |
% \fi |
| 8701 |
% \ifGERMAN |
| 8702 |
% Ein Strahlengang setzt sich aus Strahlen zwischen den Komponenten und |
| 8703 |
% innerhalb der Komponenten zusammen. Ob diese internen Strahlen gezeichnet |
| 8704 |
% werden, kann mit mehreren Parametern festgelegt werden. Die erste, letzte und |
| 8705 |
% die übrigen Komponenten werden separat gehandhabt. |
| 8706 |
% \fi |
| 8707 |
% |
| 8708 |
% \begin{optionlist} |
| 8709 |
% \boolitem[true]{beaminside} |
| 8710 |
% \ifGERMAN |
| 8711 |
% Zeichnet den Strahlengang innerhalb aller Komponenten mit Ausnahme der |
| 8712 |
% ersten und letzten, die von dieser Option nicht beeinflusst. |
| 8713 |
% \fi |
| 8714 |
% \ifENGLISH |
| 8715 |
% Draw the internal beams in all intermediate components, the first and last |
| 8716 |
% components are not affected. |
| 8717 |
% \fi |
| 8718 |
% \iffalse |
| 8719 |
%<*ignore> |
| 8720 |
% \fi |
| 8721 |
\begin{LTXexample}[morekeywords = {[21]{beaminside}}] |
| 8722 |
\begin{pspicture}(0.3,0.3)(3,4) |
| 8723 |
\psset{optboxwidth=1} |
| 8724 |
\optbox[position=end](1,1)(1,3) |
| 8725 |
\optretplate(1,1)(1,3) |
| 8726 |
\pentaprism(1,3)(1,1)(2,1) |
| 8727 |
\optbox[position=end](1,1)(2,1) |
| 8728 |
\drawbeam[beampos=-0.05, linecolor=red]{-} |
| 8729 |
\drawbeam[beampos=0.05, beaminside=false]{-} |
| 8730 |
\end{pspicture} |
| 8731 |
\end{LTXexample} |
| 8732 |
% \iffalse |
| 8733 |
%</ignore> |
| 8734 |
% \fi |
| 8735 |
% |
| 8736 |
% \boolitem[false]{beaminsidefirst} |
| 8737 |
% \ifGERMAN |
| 8738 |
% Zeichne den Strahlengang innerhalb der ersten Komponenten. |
| 8739 |
% \fi |
| 8740 |
% \ifENGLISH |
| 8741 |
% Draw the internal beams of the first component. |
| 8742 |
% \fi |
| 8743 |
% \iffalse |
| 8744 |
%<*ignore> |
| 8745 |
% \fi |
| 8746 |
\begin{LTXexample}[morekeywords = {[21]{beaminsidefirst}}] |
| 8747 |
\begin{pspicture}(0.3,0.3)(3,4) |
| 8748 |
\psset{optboxwidth=1} |
| 8749 |
\optbox[position=end](1,1)(1,3) |
| 8750 |
\optretplate(1,1)(1,3) |
| 8751 |
\pentaprism(1,3)(1,1)(2,1) |
| 8752 |
\optbox[position=end](1,1)(2,1) |
| 8753 |
\drawbeam[beampos=-0.05, linecolor=red]{-} |
| 8754 |
\drawbeam[beampos=0.05, beaminsidefirst]{-} |
| 8755 |
\end{pspicture} |
| 8756 |
\end{LTXexample} |
| 8757 |
% \iffalse |
| 8758 |
%</ignore> |
| 8759 |
% \fi |
| 8760 |
% |
| 8761 |
% \boolitem[false]{beaminsidelast} |
| 8762 |
% \ifGERMAN |
| 8763 |
% Zeichne den Strahlengang innerhalb der letzten Komponenten. |
| 8764 |
% \fi |
| 8765 |
% \ifENGLISH |
| 8766 |
% Draw the internal beams of the last component. |
| 8767 |
% \fi |
| 8768 |
% \iffalse |
| 8769 |
%<*ignore> |
| 8770 |
% \fi |
| 8771 |
\begin{LTXexample}[morekeywords = {[21]{beaminsidelast}}] |
| 8772 |
\begin{pspicture}(0.3,0.3)(3,4) |
| 8773 |
\psset{optboxwidth=1} |
| 8774 |
\optbox[position=end](1,1)(1,3) |
| 8775 |
\optretplate(1,1)(1,3) |
| 8776 |
\pentaprism(1,3)(1,1)(2,1) |
| 8777 |
\optbox[position=end](1,1)(2,1) |
| 8778 |
\drawbeam[beampos=-0.05, linecolor=red]{-} |
| 8779 |
\drawbeam[beampos=0.05, beaminsidelast]{-} |
| 8780 |
\end{pspicture} |
| 8781 |
\end{LTXexample} |
| 8782 |
% \iffalse |
| 8783 |
%</ignore> |
| 8784 |
% \fi |
| 8785 |
% |
| 8786 |
% \boolitem[true]{allowbeaminside} |
| 8787 |
% \ifGERMAN |
| 8788 |
% Damit kann bestimmt werden, ob der Strahlengang innerhalb einer Komponente |
| 8789 |
% gezeichnet werden darf. Dieser Parameter wirkt nur auf Komponenten und |
| 8790 |
% überschreibt, falls auf \opt{false} gesetzt, jegliche Strahleinstellungen mit |
| 8791 |
% \Lkeyword{beaminside}, \Lkeyword{beaminsidefirst} und |
| 8792 |
% \Lkeyword{beaminsidelast}. Damit kann der Strahlengang in einzelnen |
| 8793 |
% Komponenten unterdrückt werden, für die es keinen Sinn macht |
| 8794 |
% (z.B. \Lcomp{optfilter} und \Lcomp{optdiode}, was sonst nicht möglich ist. |
| 8795 |
% \fi |
| 8796 |
% \ifENGLISH |
| 8797 |
% Define whether a beam is drawn inside a component. The option affects |
| 8798 |
% components only and overwrites all settings of \Lkeyword{beaminside}, |
| 8799 |
% \Lkeyword{beaminsidefirst}, and \Lkeyword{beaminsidelast} if set to |
| 8800 |
% \opt{false}. With this you can forbid any internal beams for components where |
| 8801 |
% it does not make any sense (e.g. \Lcomp{optfilter} and \Lcomp{optdiode}). |
| 8802 |
% \fi |
| 8803 |
% \iffalse |
| 8804 |
%<*ignore> |
| 8805 |
% \fi |
| 8806 |
\begin{LTXexample}[morekeywords = {[21]{allowbeaminside}}] |
| 8807 |
\begin{pspicture}(3,2) |
| 8808 |
\psset{optboxwidth=0.5} |
| 8809 |
\pnodes(0,1){A}(3,1){B} |
| 8810 |
\optbox[position=0.2](A)(B) |
| 8811 |
\optbox[position=0.4, allowbeaminside=false](A)(B) |
| 8812 |
\optbox[position=0.6](A)(B) |
| 8813 |
\optbox[position=0.8](A)(B) |
| 8814 |
\drawbeam(A){-}(B) |
| 8815 |
\end{pspicture} |
| 8816 |
\end{LTXexample} |
| 8817 |
% \iffalse |
| 8818 |
%</ignore> |
| 8819 |
% \fi |
| 8820 |
% |
| 8821 |
% \boolitem[false]{forcebeaminside} |
| 8822 |
% \ifGERMAN |
| 8823 |
% Wenn auf \opt{true} gesetzt, wird der Strahlengang innerhalb der |
| 8824 |
% betroffenen Komponenten immer gezeichnet wird, unabhängig von allen |
| 8825 |
% anderen Strahleinstellungen mit \Lkeyword{allowbeaminside}, |
| 8826 |
% \Lkeyword{beaminside}, \Lkeyword{beaminsidefirst} und |
| 8827 |
% \Lkeyword{beaminsidelast}. Damit kann der Strahl innerhalb einzelner |
| 8828 |
% Komponenten gezeichnet werden, auch wenn alle anderen Komponenten in |
| 8829 |
% dem Strahlengang keinen internen Strahl haben sollen. |
| 8830 |
% \fi |
| 8831 |
% \ifENGLISH |
| 8832 |
% Forces to draw a beam inside a component. The option affects |
| 8833 |
% components only and overwrites all settings of |
| 8834 |
% \Lkeyword{allowbeaminside}, \Lkeyword{beaminside}, |
| 8835 |
% \Lkeyword{beaminsidefirst}, and \Lkeyword{beaminsidelast} if set to |
| 8836 |
% \opt{true}. With this you can force an internal beams for single |
| 8837 |
% components within a beam path. |
| 8838 |
% \fi |
| 8839 |
% \iffalse |
| 8840 |
%<*ignore> |
| 8841 |
% \fi |
| 8842 |
\begin{LTXexample}[morekeywords = {[21]{forcebeaminside}}] |
| 8843 |
\begin{pspicture}(3,2) |
| 8844 |
\psset{optboxwidth=0.5} |
| 8845 |
\pnodes(0,1){A}(3,1){B} |
| 8846 |
\optbox[position=0.2](A)(B) |
| 8847 |
\optbox[position=0.4, forcebeaminside](A)(B) |
| 8848 |
\optbox[position=0.6](A)(B) |
| 8849 |
\optbox[position=0.8](A)(B) |
| 8850 |
\drawbeam[beaminside=false](A){-}(B) |
| 8851 |
\end{pspicture} |
| 8852 |
\end{LTXexample} |
| 8853 |
% \iffalse |
| 8854 |
%</ignore> |
| 8855 |
% \fi |
| 8856 |
% |
| 8857 |
% \numitem[-1]{startinsidecount} |
| 8858 |
% \ifGERMAN |
| 8859 |
% Anzahl der Segmente, die innerhalb der ersten Komponente verwendet |
| 8860 |
% werden. Diese Option hat nur eine Wirkung, wenn |
| 8861 |
% \Lkeyword{beaminsidefirst} oder \Lkeyword{startinside} auf \opt{true} |
| 8862 |
% gesetzt sind. |
| 8863 |
% \fi |
| 8864 |
% \ifENGLISH |
| 8865 |
% Number of segments, which are used inside the first component. This |
| 8866 |
% option is in effect only with \Lkeyword{beaminsidefirst} or |
| 8867 |
% \Lkeyword{startinside} set to \opt{true}. |
| 8868 |
% \fi |
| 8869 |
% |
| 8870 |
% \numitem[-1]{stopinsidecount} |
| 8871 |
% \ifGERMAN |
| 8872 |
% Anzahl der Segmente, die innerhalb der letzten Komponente verwendet |
| 8873 |
% werden. Diese Option hat nur eine Wirkung, wenn |
| 8874 |
% \Lkeyword{beaminsidelast} oder \Lkeyword{stopinside} auf \opt{true} |
| 8875 |
% gesetzt sind. |
| 8876 |
% \fi |
| 8877 |
% \ifENGLISH |
| 8878 |
% Number of segments, which are used inside the last component. This |
| 8879 |
% option is in effect only with \Lkeyword{beaminsidelast} or |
| 8880 |
% \Lkeyword{stopinside} set to \opt{true}. |
| 8881 |
% \fi |
| 8882 |
% |
| 8883 |
% \iffalse |
| 8884 |
%<*ignore> |
| 8885 |
% \fi |
| 8886 |
\begin{LTXexample}[morekeywords = {[21]{stopinsidecount, startinsidecount}}] |
| 8887 |
\begin{pspicture}(4,2) |
| 8888 |
\pnodes(0,2){A}(2,0){B}(4,2){C} |
| 8889 |
\optprism[compname=P, n=1, prismtype=reflective, prismangle=90](A)(B)(C) |
| 8890 |
\lens[abspos=1.08](\oenodeIfc{2}{P})(A) |
| 8891 |
\lens[abspos=1.08](\oenodeIfc{2}{P})(C) |
| 8892 |
\newpsstyle{Beam}{linestyle=none, fillstyle=solid} |
| 8893 |
\drawwidebeam[fillcolor=green, beamwidth=0.2, beaminsidelast, stopinsidecount=1](A){2}{1} |
| 8894 |
\drawwidebeam[fillcolor=orange, beaminsidefirst, startinsidecount=1, loadbeam]{1}{3}(C) |
| 8895 |
\end{pspicture} |
| 8896 |
\end{LTXexample} |
| 8897 |
% \iffalse |
| 8898 |
%</ignore> |
| 8899 |
% \fi |
| 8900 |
% |
| 8901 |
% \choitem[auto]{beammode}{refl, trans, reflective, transmittive, auto} |
| 8902 |
% \ifGERMAN |
| 8903 |
% Mit dieser Option kann das Strahlverhalten bei Komponenten wie |
| 8904 |
% z. B. dem \Lcomp{beamsplitter} auf reflektierend oder transmittierend |
| 8905 |
% festgelegt werden, unabhängig von den verwendeten Knoten und deren |
| 8906 |
% relative Position bezüglich der Komponente. |
| 8907 |
% \fi |
| 8908 |
% \ifENGLISH |
| 8909 |
% With this option one can force the beam path through e.g. a |
| 8910 |
% \Lcomp{beamsplitter} to \opt{reflective} or \opt{transmittive} |
| 8911 |
% independent of the choosen nodes and their position relative to the |
| 8912 |
% component. |
| 8913 |
% \fi |
| 8914 |
% \end{optionlist} |
| 8915 |
% |
| 8916 |
% \ifENGLISH\subsection{Connecting with nodes}\fi |
| 8917 |
% \ifGERMAN\subsection{Verbinden mit Knoten}\fi |
| 8918 |
% |
| 8919 |
% \ifENGLISH |
| 8920 |
% As mentioned earlier in this chapter, beams can connect components |
| 8921 |
% also with nodes. For raytracing you need a plane, which can be created |
| 8922 |
% automatically or manually in different ways. |
| 8923 |
% \fi |
| 8924 |
% \ifGERMAN |
| 8925 |
% Wie vorher schon einmal erwähnt können Komponenten auch mit Knoten |
| 8926 |
% verbunden werden. Für Raytracing wird in der Regel eine Ebene |
| 8927 |
% benötigt, die auf unterschiedliche Weise automatisch oder manuell |
| 8928 |
% erstellt werden kann. |
| 8929 |
% \fi |
| 8930 |
% |
| 8931 |
% \begin{optionlist} |
| 8932 |
% \choitem[connection]{beamnodealign}{vec, conn, vector, connection} |
| 8933 |
% \ifENGLISH |
| 8934 |
% This parameter controls the alignment of the automatically created |
| 8935 |
% node interfaces. By default (\opt{connection}) the interface is |
| 8936 |
% aligned perpendicular to the direct connection between node and the |
| 8937 |
% previous interface node. |
| 8938 |
% \fi |
| 8939 |
% \ifGERMAN |
| 8940 |
% Dieser Parameter bestimmt die Ausrichtung der automatisch erstellen |
| 8941 |
% Grenzflächen. In der Voreinstellung (\opt{connection}) wird die Ebene |
| 8942 |
% vertikal zur direkten Verbindung zwischen dem Knoten und dem |
| 8943 |
% vorangegangenen Grenzflächenknoten ausgerichtet. |
| 8944 |
% \fi |
| 8945 |
% \iffalse |
| 8946 |
%<*ignore> |
| 8947 |
% \fi |
| 8948 |
\begin{LTXexample} |
| 8949 |
\begin{pspicture}(3,2) |
| 8950 |
\pnodes(0,1){A}(2.5,1){B} |
| 8951 |
\lens[lens=3 3 2, n=2.5, abspos=0.5](A)(B) |
| 8952 |
\multido{\r=-0.3+0.3}{3}{% |
| 8953 |
\drawbeam[beampos=\r](A){}(B)} |
| 8954 |
\end{pspicture} |
| 8955 |
\end{LTXexample} |
| 8956 |
\begin{LTXexample} |
| 8957 |
\begin{pspicture}(3,2) |
| 8958 |
\pnodes(0,1){A}(3,1){B} |
| 8959 |
\lens[abspos=0.5](A)(B) |
| 8960 |
\addtopsstyle{Beam}{linecolor=black, fillstyle=solid, beamwidth=0.2, fillcolor=red, opacity=0.5, beaminside=false} |
| 8961 |
\multido{\r=-0.3+0.3}{3}{\drawwidebeam[beampos=\r](A){}(B)} |
| 8962 |
\end{pspicture} |
| 8963 |
\end{LTXexample} |
| 8964 |
% \iffalse |
| 8965 |
%</ignore> |
| 8966 |
% \fi |
| 8967 |
% |
| 8968 |
% \ifGERMAN |
| 8969 |
% Ist der Wert auf \opt{vector} gesetzt, dann wird die Ebene vertikal |
| 8970 |
% zum einfallenden Strahlvektor ausgerichtet. Bei weiten Strahlen wird |
| 8971 |
% der gemittelte Strahlenvektor (siehe \Lcs{oeBeamVecMedian}) als |
| 8972 |
% Referenz verwendet. Beispiele in dem das sehr praktisch ist, sind |
| 8973 |
% \prettyref{ex:beamcenter} und \prettyref{ex:wgm-pdc}. |
| 8974 |
% \fi |
| 8975 |
% \ifENGLISH |
| 8976 |
% For a value \opt{vector}, the plane is aligned vertical to the |
| 8977 |
% incoming beam vector. For wide beams the mean beam vector is used (see |
| 8978 |
% \Lcs{oeBeamVecMedian}). Examples where this is very convenient are |
| 8979 |
% \prettyref{ex:beamcenter} and \prettyref{ex:wgm-pdc}. |
| 8980 |
% \fi |
| 8981 |
% \iffalse |
| 8982 |
%<*ignore> |
| 8983 |
% \fi |
| 8984 |
\begin{LTXexample}[morekeywords={[21]beamnodealign}] |
| 8985 |
\begin{pspicture}(3,2) |
| 8986 |
\pnodes(0,1){A}(3,1){B} |
| 8987 |
\lens[abspos=0.5](A)(B) |
| 8988 |
\addtopsstyle{Beam}{linecolor=black, fillstyle=solid, beamwidth=0.2, beamnodealign=vector, fillcolor=green, opacity=0.5, beaminside=false} |
| 8989 |
\multido{\r=-0.3+0.3}{3}{\drawwidebeam[beampos=\r](A){}(B)} |
| 8990 |
\end{pspicture} |
| 8991 |
\end{LTXexample} |
| 8992 |
% \iffalse |
| 8993 |
%</ignore> |
| 8994 |
% \fi |
| 8995 |
% \end{optionlist} |
| 8996 |
% |
| 8997 |
% \ifENGLISH |
| 8998 |
% The automatic alignment is very handy in many cases, but does not |
| 8999 |
% allow to rotate the node planes to a fixed angle and can give again |
| 9000 |
% problems with shifted and rotated components (see |
| 9001 |
% \prettyref{sec:rotshift}). In the following example the green beam is |
| 9002 |
% with \Lkeyword{beamnodealign} set to \opt{vector}, for the red beam it |
| 9003 |
% is set to \opt{connection}: |
| 9004 |
% \fi |
| 9005 |
% \ifGERMAN |
| 9006 |
% Die automatische Ausrichtung ist in vielen Fällen sehr praktisch, kann |
| 9007 |
% aber wiederum unerwünschte Ergebnisse bei gedrehten und verschobenen |
| 9008 |
% Komponenten ergeben und die Ebenenausrichtung kann nicht beliebig |
| 9009 |
% gesetzt werden. Im folgenden Beispiel ist beim grünen Strahl |
| 9010 |
% \Lkeyword{beamnodealign} auf \opt{vector} gesetzt, bei dem roten |
| 9011 |
% Strahl hingegen auf \opt{connection}: |
| 9012 |
% \fi |
| 9013 |
% |
| 9014 |
% \hspace*{\fill}% |
| 9015 |
% \begin{pspicture}(4,2.7) |
| 9016 |
% \pnodes(0,0.5){A}(4,0.5){B} |
| 9017 |
% \lens[compshift=0.5, abspos=1, lens=1.5 1.5 2](A)(B) |
| 9018 |
% \drawwidebeam[beamalign=absolute, linecolor=black, fillstyle=solid, beamwidth=0.6, fillcolor=green, opacity=0.5, beamnodealign=vector](A){}(B) |
| 9019 |
% \rput[rb](4,0){\ttfamily vector} |
| 9020 |
% \end{pspicture} |
| 9021 |
% \hspace*{1cm}% |
| 9022 |
% \begin{pspicture}(5,3) |
| 9023 |
% \pnodes(0,0.5){A}(4,0.5){B} |
| 9024 |
% \lens[compshift=0.5, abspos=1, lens=1.5 1.5 2](A)(B) |
| 9025 |
% \drawwidebeam[beamalign=absolute, linecolor=black, fillstyle=solid, beamwidth=0.6, fillcolor=red, opacity=0.5](A){}(B) |
| 9026 |
% \rput[rb](5,0){\ttfamily connection} |
| 9027 |
% \end{pspicture} |
| 9028 |
% \hspace*{\fill}% |
| 9029 |
% |
| 9030 |
% \ifENGLISH |
| 9031 |
% For more flexibility, the package provides an «invisible» plane which |
| 9032 |
% can be used for this purpose. |
| 9033 |
% \fi |
| 9034 |
% \ifGERMAN |
| 9035 |
% Das kann mit einer «unsichtbaren» Ebene erreicht werden, die mit |
| 9036 |
% \Lcomp{optplane} definiert wird. |
| 9037 |
% \fi |
| 9038 |
% |
| 9039 |
% \begin{ltxsyntax} |
| 9040 |
% \xLcomp{optplane}\compitem{optplane}(center) |
| 9041 |
% |
| 9042 |
% \ifENGLISH |
| 9043 |
% The plane is defined by a single node only, the rotation around this node |
| 9044 |
% is defined with \Lkeyword{angle}. The angle is with respect to the default |
| 9045 |
% alignment, which is vertical. |
| 9046 |
% \fi |
| 9047 |
% \ifGERMAN Die Ebene wird durch lediglich einen Knoten definiert, die Drehung |
| 9048 |
% darum kann mit \Lkeyword{angle} angegeben werden. Der Winkel ist relativ zur |
| 9049 |
% ursprünglichen, vertikalen Ausrichtung. |
| 9050 |
% \fi |
| 9051 |
% \iffalse |
| 9052 |
%<*ignore> |
| 9053 |
% \fi |
| 9054 |
\begin{LTXexample} |
| 9055 |
\begin{pspicture}(3,2) |
| 9056 |
\pnodes(0,1){A}(2.5,1){B} |
| 9057 |
\lens[lens=3 3 2, n=2.5, abspos=0.5](A)(B) |
| 9058 |
\optplane[angle=-30](B) |
| 9059 |
\multido{\r=-0.3+0.3}{3}{% |
| 9060 |
\drawbeam[beampos=\r](A){-}} |
| 9061 |
\end{pspicture} |
| 9062 |
\end{LTXexample} |
| 9063 |
% \iffalse |
| 9064 |
%</ignore> |
| 9065 |
% \fi |
| 9066 |
% \end{ltxsyntax} |
| 9067 |
% |
| 9068 |
% \ifENGLISH\subsection{Automatic connections}\fi |
| 9069 |
% \ifGERMAN\subsection{Automatische Verbindungen}\fi |
| 9070 |
% |
| 9071 |
% \ifENGLISH |
| 9072 |
% Beam can also be drawn at definition time of a component, which can be handy, |
| 9073 |
% but allows only very elemental beams. |
| 9074 |
% \fi |
| 9075 |
% \ifGERMAN Lichtstrahlen können auch zusammen mit der Komponentendefinition |
| 9076 |
% gezeichnet werden. Das kann für einfache Strahlengänge sehr praktisch sein, |
| 9077 |
% ist aber sehr unflexibel. |
| 9078 |
% \fi |
| 9079 |
% |
| 9080 |
% \begin{optionlist} |
| 9081 |
% \boolitem[false]{beam} |
| 9082 |
% \ifGERMAN Kann als Option für jede Komponente verwendet werden, ist äquivalent |
| 9083 |
% zu |
| 9084 |
% \fi |
| 9085 |
% \ifENGLISH Can be used as option for every component, is equivalent to the |
| 9086 |
% statement |
| 9087 |
% \fi |
| 9088 |
% \begin{lstlisting}[gobble=2] |
| 9089 |
% \drawbeam[raytrace=false](\oenodeRefA{}){}(\oenodeRefB{}) |
| 9090 |
% \end{lstlisting} |
| 9091 |
% \ifENGLISH which draws a beam from one reference node via the component to the |
| 9092 |
% other reference node. |
| 9093 |
% \fi |
| 9094 |
% \ifGERMAN womit ein Strahl vom ersten Referenzknoten über die Komponente zum |
| 9095 |
% zweiten Referenzknoten gezeichnet wird. |
| 9096 |
% \fi |
| 9097 |
% \end{optionlist} |
| 9098 |
% |
| 9099 |
% \ifENGLISH\subsection{Beam appearance}\fi |
| 9100 |
% \ifGERMAN\subsection{Strahlaussehen}\fi |
| 9101 |
% \label{sec:beamappearance-single} |
| 9102 |
% |
| 9103 |
% \begin{stylelist} |
| 9104 |
% \styleitem[linecolor=green!90!black, linejoin=1]{Beam} |
| 9105 |
% \ifENGLISH |
| 9106 |
% The appearance of beams is controlled with this style. The optional argument |
| 9107 |
% of \nxLcs{draw*beam} can also be used, these options can overwrite settings from |
| 9108 |
% the \Lstyle{Beam} style. |
| 9109 |
% \fi |
| 9110 |
% \ifGERMAN |
| 9111 |
% Das Aussehen der Lichtstrahlen kann mit diesem Stil gesteuert werden. Das |
| 9112 |
% optionale Argument von \nxLcs{draw*beam} kann ebenfalls dafür verwendet |
| 9113 |
% werden und kann die Einstellungen des \Lstyle{Beam}-Stils überschreiben. |
| 9114 |
% \fi |
| 9115 |
% \end{stylelist} |
| 9116 |
% |
| 9117 |
% \begin{optionlist} |
| 9118 |
% \valitem{addtoBeam}{list} |
| 9119 |
% \addtostylemsg{Beam} |
| 9120 |
% \valitem{newBeam}{list} |
| 9121 |
% \newstylemsg{Beam} |
| 9122 |
% |
| 9123 |
% \psnumitem[0.2]{ArrowInsideMinLength} |
| 9124 |
% \ifGERMAN |
| 9125 |
% \nxLcs{draw*beam} verwendet auch die Option \Lkeyword*{ArrowInside} aus |
| 9126 |
% \LPack{pstricks-add}. In dem Fall wird für alle Strahlsegmente ein Pfeil |
| 9127 |
% gezeichnet, was häufig für die internen, kurzen Strahlengänge unerwünscht |
| 9128 |
% ist. Mit \Lkeyword{ArrowInsideMinLength} kann angegeben werden ab welcher |
| 9129 |
% Mindestlänge eines Strahlsegmentes die Pfeil gezeichnet werden. In dem |
| 9130 |
% folgenden Beispiel ist der Wert so gewählt, dass nur der untere interne |
| 9131 |
% Strahl einen Pfeil hat (siehe auch \prettyref{ex:czerny-turner}). |
| 9132 |
% \fi |
| 9133 |
% \ifENGLISH |
| 9134 |
% \nxLcs{draw*beam} uses also the option \Lkeyword*{ArrowInside} from |
| 9135 |
% \LPack{pstricks-add}. In this case the arrows would be drawn for every beam |
| 9136 |
% segment, which is often undesired for the internal, short beam |
| 9137 |
% paths. \Lkeyword{ArrowInsideMinLength} sets a minimum segment length, below |
| 9138 |
% which no internal arrows are drawn. In the following example the value is |
| 9139 |
% selected such that only the lower internal beam has an arrow (see also |
| 9140 |
% \prettyref{ex:czerny-turner}). |
| 9141 |
% \fi |
| 9142 |
% \iffalse |
| 9143 |
%<*ignore> |
| 9144 |
% \fi |
| 9145 |
\begin{LTXexample}[morekeywords={[21]{ArrowInsideMinLength}}] |
| 9146 |
\begin{pspicture}(3,2) |
| 9147 |
\optprism(0,1)(2,1)(3,0.5) |
| 9148 |
\drawwidebeam[beamwidth=0.4, ArrowInside=->, ArrowInsideMinLength=0.5, arrowscale=1.5, raytrace=false](0,1){}(3,0.5) |
| 9149 |
\end{pspicture} |
| 9150 |
\end{LTXexample} |
| 9151 |
% \iffalse |
| 9152 |
%</ignore> |
| 9153 |
% \fi |
| 9154 |
% |
| 9155 |
% \psnumitem[-1]{ArrowInsideMaxLength} |
| 9156 |
% \ifGERMAN Gibt analog zu \Lkeyword{ArrowInsideMinLength} die maximale Länge |
| 9157 |
% eines Segments an, für das Pfeile gezeichnet werden. Ist der Wert negativ, |
| 9158 |
% dann gibt es keine obere Grenze. |
| 9159 |
% \fi |
| 9160 |
% \ifENGLISH Like \Lkeyword{ArrowInsideMaxLength}, but sets the maximum length |
| 9161 |
% of a segment for which the arrows are drawn. If the value is negative, no |
| 9162 |
% upper limit is defined. |
| 9163 |
% \fi |
| 9164 |
% \end{optionlist} |
| 9165 |
% |
| 9166 |
% \ifGERMAN \Lkeyword*{ArrowInside} kann auch verwendet werden ohne dass |
| 9167 |
% ein Linientyp definiert ist. |
| 9168 |
% \fi |
| 9169 |
% \ifENGLISH \Lkeyword*{ArrowInside} can be used also without a |
| 9170 |
% linestyle. |
| 9171 |
% \fi |
| 9172 |
% \iffalse |
| 9173 |
%<*ignore> |
| 9174 |
% \fi |
| 9175 |
\begin{LTXexample} |
| 9176 |
\begin{pspicture}(0,0)(3.5,2) |
| 9177 |
\pnodes(0,1.5){A}(2,1.5){B}(2.8,0){C} |
| 9178 |
\mirror[mirrorwidth=1.2, mirrortype=extended](A)(B)(C) |
| 9179 |
\newpsstyle{Beam}{linecolor=green, linestyle=none, fillstyle=solid, fillcolor=green, opacity=0.2} |
| 9180 |
\drawwidebeam[beamwidth=0.5](A){}(C) |
| 9181 |
\drawbeam[ArrowInside=->, arrowscale=2.5, ArrowFill=false, linewidth=1.5\pslinewidth, ArrowInsidePos=0.9, ArrowInsideMaxLength=1.8](A){}(C) |
| 9182 |
\end{pspicture} |
| 9183 |
\end{LTXexample} |
| 9184 |
% \iffalse |
| 9185 |
%</ignore> |
| 9186 |
% \fi |
| 9187 |
% |
| 9188 |
% \begin{stylelist} |
| 9189 |
% \typeitem{fade}{\prm{linestyle}} |
| 9190 |
% \ifENGLISH |
| 9191 |
% Fade from the current \opt{linecolor} to another color, defined by |
| 9192 |
% \Lkeyword{fadeto}. The line style currently works only for line, not |
| 9193 |
% for curves. The complete path is divided in \Lkeyword{fadepoints}$ - |
| 9194 |
% 1$ segments. |
| 9195 |
% \fi |
| 9196 |
% \ifGERMAN |
| 9197 |
% Erzeugt einen Farbverlauf von der aktuellen \opt{linecolor} zu einer |
| 9198 |
% anderen Farbe, definiert durch \Lkeyword{fadeto}. Der Linienstil |
| 9199 |
% funktioniert momentan nur vernünftig mit Linien, nicht jedoch mit |
| 9200 |
% Kurven. Der gesamte Pfad wird in \Lkeyword{fadepoints}$- 1$ Segmente |
| 9201 |
% unterteilt. |
| 9202 |
% \fi |
| 9203 |
% \iffalse |
| 9204 |
%<*ignore> |
| 9205 |
% \fi |
| 9206 |
\begin{LTXexample} |
| 9207 |
\begin{pspicture}(3,1) |
| 9208 |
\psline[linewidth=0.2, linecolor=red, linestyle=fade, fadepoints=50](0,0.5)(3,0.5) |
| 9209 |
\end{pspicture} |
| 9210 |
\end{LTXexample} |
| 9211 |
% \iffalse |
| 9212 |
%</ignore> |
| 9213 |
% \fi |
| 9214 |
% \end{stylelist} |
| 9215 |
% \begin{optionlist} |
| 9216 |
% \choitem[white]{fadeto}{white, black, transparency} |
| 9217 |
% \ifENGLISH |
| 9218 |
% The color at the fade end, depends on \Lkeyword{fadefuncname} and |
| 9219 |
% \Lkeyword{fadefunc}. |
| 9220 |
% \fi |
| 9221 |
% \ifGERMAN |
| 9222 |
% Die Endfarbe des Farbverlaufs, hängt auch von \Lkeyword{fadefuncname} |
| 9223 |
% und \Lkeyword{fadefunc} ab. |
| 9224 |
% \fi |
| 9225 |
% \iffalse |
| 9226 |
%<*ignore> |
| 9227 |
% \fi |
| 9228 |
\begin{LTXexample} |
| 9229 |
\begin{pspicture}(3,1) |
| 9230 |
\psset{linewidth=0.2, linecolor=red, linestyle=fade, fadepoints=50} |
| 9231 |
\psline[fadeto=white](0,0.9)(3,0.9) |
| 9232 |
\psline[fadeto=black](0,0.5)(3,0.5) |
| 9233 |
\psline[fadeto=transparency](0,0.1)(3,0.1) |
| 9234 |
\end{pspicture} |
| 9235 |
\end{LTXexample} |
| 9236 |
% \iffalse |
| 9237 |
%</ignore> |
| 9238 |
% \fi |
| 9239 |
% |
| 9240 |
% \numitem[200]{fadepoints} |
| 9241 |
% \ifENGLISH |
| 9242 |
% Number of points used for lines with style \opt{fade}. |
| 9243 |
% \fi |
| 9244 |
% \ifGERMAN |
| 9245 |
% Anzahl der Punkte, die für den Linienstil \opt{fade} verwendet werden. |
| 9246 |
% \fi |
| 9247 |
% |
| 9248 |
% \choitem[linear]{fadefuncname}{gauss, linear, squared, exp, custom} |
| 9249 |
% \ifENGLISH |
| 9250 |
% Some predefined fade functions, which determine the color gradient. If |
| 9251 |
% set to \opt{custom}, the Postscript code in \Lkeyword{fadefunc} is |
| 9252 |
% used. |
| 9253 |
% \fi |
| 9254 |
% \ifGERMAN |
| 9255 |
% Ein paar vordefinierte Funktionen, die den Farbverlauf bestimmen. Wird |
| 9256 |
% \opt{custom} angegeben, dann wird der Postscript-Code aus |
| 9257 |
% \Lkeyword{fadefunc} verwendet. |
| 9258 |
% \fi |
| 9259 |
% |
| 9260 |
% \valitem{fadefunc}{PS code} |
| 9261 |
% \ifENGLISH |
| 9262 |
% Define a custom gradient for line style \Lkeyword{fade}. The \prm{PS |
| 9263 |
% code} must evaluate a number on the stack in the range $[0,1]$ (0: |
| 9264 |
% path start, 1: path end) to $[0,1]$ (0: \Lkeyword{fadeto} color, 1: |
| 9265 |
% current line color). The function values are clipped to $[0,1]$. |
| 9266 |
% \fi |
| 9267 |
% \ifGERMAN |
| 9268 |
% Eine benutzerdefinierte Funktion für den Farbverlauf des Linienstils |
| 9269 |
% \Lkeyword{fade}. Der \prm{PS code} muss eine Zahl auf dem Stack im |
| 9270 |
% Intervall $[0,1]$ (0: Pfadanfang, 1: Pfadende) auf das Intervall $[0, |
| 9271 |
% 1]$ abbilden (0: \Lkeyword{fadeto}-Farbe, 1: aktuelle |
| 9272 |
% Linienfarbe). Die Funktionswerte werden auf das Intervall $[0, 1]$ |
| 9273 |
% abgeschnitten. |
| 9274 |
% \fi |
| 9275 |
% |
| 9276 |
% \iffalse |
| 9277 |
%<*ignore> |
| 9278 |
% \fi |
| 9279 |
\begin{LTXexample} |
| 9280 |
\begin{pspicture}(3,1) |
| 9281 |
\psset{linewidth=0.2, linecolor=red, linestyle=fade, fadepoints=50} |
| 9282 |
\psline[fadefuncname=gauss](0,1)(3,1) |
| 9283 |
\psline[fadefuncname=exp](0,0.7)(3,0.7) |
| 9284 |
\psline[fadefuncname=custom, fadefunc={360 mul cos 1 add 0.5 mul}](0,0.4)(3,0.4) |
| 9285 |
\psline[fadefuncname=custom, fadefunc={neg 1 add 2 mul}](0,0.1)(3,0.1) |
| 9286 |
\end{pspicture} |
| 9287 |
\end{LTXexample} |
| 9288 |
% \iffalse |
| 9289 |
%</ignore> |
| 9290 |
% \fi |
| 9291 |
% |
| 9292 |
% \ifENGLISH For a nice example see \prettyref{ex:dsotm}.\fi |
| 9293 |
% \ifGERMAN Ein schönes Beispiel ist \prettyref{ex:dsotm}.\fi |
| 9294 |
% \end{optionlist} |
| 9295 |
% |
| 9296 |
% \ifGERMAN\section{Aufgeweitete Strahlen}\fi |
| 9297 |
% \ifENGLISH\section{Drawing wide beams}\fi |
| 9298 |
% \label{sec:drawwidebeam} |
| 9299 |
% |
| 9300 |
% \ifENGLISH |
| 9301 |
% All information about single beams (see \prettyref{sec:drawbeam}) apply to |
| 9302 |
% wide beams as well. Here, you find all additional information which apply to |
| 9303 |
% wide beams only. |
| 9304 |
% \fi |
| 9305 |
% \ifGERMAN |
| 9306 |
% Alle Informationen über einfache Strahlen (siehe \prettyref{sec:drawbeam}) |
| 9307 |
% betreffen auch aufgeweitete Strahlen. Hier werden nur zusätzliche |
| 9308 |
% Einstellmöglichkeiten aufgeweiteter Strahlen behandelt. |
| 9309 |
% \fi |
| 9310 |
% |
| 9311 |
% \begin{ltxsyntax} |
| 9312 |
% \xLcs{drawwidebeam}\cmditem{drawwidebeam}[options]{obj$_1$}{obj$_2$}\ldots |
| 9313 |
% \end{ltxsyntax} |
| 9314 |
% |
| 9315 |
% \begin{optionlist} |
| 9316 |
% \psnumitem[0]{beamwidth} |
| 9317 |
% \ifENGLISH The initial beam width, measured at the initial position (defined |
| 9318 |
% with \Lkeyword{beampos}) perpendicular to the beam direction. |
| 9319 |
% \fi |
| 9320 |
% \ifGERMAN Die Anfangsstrahlbreite an der mit \Lkeyword{beampos} angegebenen |
| 9321 |
% Position, gemessen vertikal zur Verbindungslinie zur nächsten Komponente. |
| 9322 |
% \fi |
| 9323 |
% \iffalse |
| 9324 |
%<*ignore> |
| 9325 |
% \fi |
| 9326 |
\begin{LTXexample}[morekeywords = {[21]{beamwidth}}] |
| 9327 |
\begin{pspicture}(4,4) |
| 9328 |
\pnodes(1.5,0.5){A}(3.5,0.5){B}(3.5,3.5){C} |
| 9329 |
\optbox[position=end](B)(A) |
| 9330 |
\mirror[mirrortype=extended](A)(B)(C) |
| 9331 |
\optplate[position=end](B)(C) |
| 9332 |
\drawwidebeam[beamwidth=0.3]{-} |
| 9333 |
\end{pspicture} |
| 9334 |
\end{LTXexample} |
| 9335 |
% \iffalse |
| 9336 |
%</ignore> |
| 9337 |
% \fi |
| 9338 |
% |
| 9339 |
% \psnumitem[0]{beamdiv} |
| 9340 |
% \ifENGLISH The total beam divergence at the starting position, given in |
| 9341 |
% degree. Positive values give an expanding beam, negative values a contracting |
| 9342 |
% beam. |
| 9343 |
% \fi |
| 9344 |
% \ifGERMAN Die Strahldivergenz an der Startposition, angegeben in |
| 9345 |
% Grad. Positive Werte ergebenen einen expandierenden Strahl, negative einen |
| 9346 |
% kontrahierenden. |
| 9347 |
% \fi |
| 9348 |
% \iffalse |
| 9349 |
%<*ignore> |
| 9350 |
% \fi |
| 9351 |
\begin{LTXexample}[morekeywords = {[21]{beamdiv}}, linerange={1-8,11-11}] |
| 9352 |
\begin{pspicture}(3,2) |
| 9353 |
\pnodes(0,1){A}(3,1){B} |
| 9354 |
\psset{plateheight=2} |
| 9355 |
\optplate[position=start](A)(B) |
| 9356 |
\optplate[position=end](A)(B) |
| 9357 |
\addtopsstyle{Beam}{beamwidth=0.2} |
| 9358 |
\drawwidebeam[beampos=0.4, beamdiv=5]{-} |
| 9359 |
\drawwidebeam[beampos=-0.4, beamdiv=-5, linecolor=red]{-} |
| 9360 |
\rput[b](1.5,0){\footnotesize\ttfamily beamdiv < 0} |
| 9361 |
\rput[t](1.5,2){\footnotesize\ttfamily beamdiv > 0} |
| 9362 |
\end{pspicture} |
| 9363 |
\end{LTXexample} |
| 9364 |
% \iffalse |
| 9365 |
%</ignore> |
| 9366 |
% \fi |
| 9367 |
% \end{optionlist} |
| 9368 |
% |
| 9369 |
% \ifENGLISH\subsection{Beam appearance}\fi |
| 9370 |
% \ifGERMAN\subsection{Strahlaussehen}\fi |
| 9371 |
% |
| 9372 |
% \ifENGLISH |
| 9373 |
% The appearance of wide beams can be controlled like that of single beams with |
| 9374 |
% the optional argument or the \Lstyle{Beam} style (see |
| 9375 |
% \prettyref{sec:beamappearance-single}). |
| 9376 |
% |
| 9377 |
% Wide beams have two marginal rays, which are drawn according to the line |
| 9378 |
% settings, and may be filled. |
| 9379 |
% \fi |
| 9380 |
% \ifGERMAN Das Aussehen aufgeweiteter Strahlen kann genauso wie bei einfachen |
| 9381 |
% Strahlen über \Lstyle{Beam} oder das optionale Argument vorgegeben werden |
| 9382 |
% (siehe \prettyref{sec:beamappearance-single}). |
| 9383 |
% |
| 9384 |
% Breite Strahlen bestehen aus zwei Randstrahlen, die gemäß der |
| 9385 |
% Linieneinstellungen gezeichnet werden, und können zusätzlich gefüllt werden. |
| 9386 |
% \fi |
| 9387 |
% |
| 9388 |
% \begin{enumerate} |
| 9389 |
% \item |
| 9390 |
% \ifENGLISH Only marginal rays.\fi |
| 9391 |
% \ifGERMAN Nur die Randstrahlen.\fi |
| 9392 |
% |
| 9393 |
% \iffalse |
| 9394 |
%<*ignore> |
| 9395 |
% \fi |
| 9396 |
\begin{LTXexample} |
| 9397 |
\begin{pspicture}(3,2) |
| 9398 |
\pnodes(0,0.5){A}(1,0.5){B}(2.8,2){C} |
| 9399 |
\mirror[mirrorwidth=1.5](A)(B)(C) |
| 9400 |
\drawwidebeam[beamwidth=0.4](A){}(C) |
| 9401 |
\end{pspicture} |
| 9402 |
\end{LTXexample} |
| 9403 |
% \iffalse |
| 9404 |
%</ignore> |
| 9405 |
% \fi |
| 9406 |
% |
| 9407 |
% \item |
| 9408 |
% \ifENGLISH Marginal rays, and with fill style.\fi |
| 9409 |
% \ifGERMAN Randstrahlen, und Füllstil.\fi |
| 9410 |
% |
| 9411 |
% \iffalse |
| 9412 |
%<*ignore> |
| 9413 |
% \fi |
| 9414 |
\begin{LTXexample}[morekeywords={[21]fillstyle, linestyle}] |
| 9415 |
\begin{pspicture}(3,2) |
| 9416 |
\pnodes(0,0.5){A}(1,0.5){B}(2.8,2){C} |
| 9417 |
\mirror[mirrorwidth=1.5](A)(B)(C) |
| 9418 |
\addtopsstyle{Beam}{fillstyle=solid, fillcolor=red!50!white, linecolor=red} |
| 9419 |
\drawwidebeam[beamwidth=0.4](A){}(C) |
| 9420 |
\end{pspicture} |
| 9421 |
\end{LTXexample} |
| 9422 |
% \iffalse |
| 9423 |
%</ignore> |
| 9424 |
% \fi |
| 9425 |
% |
| 9426 |
% \item |
| 9427 |
% \ifENGLISH Only with fill style.\fi |
| 9428 |
% \ifGERMAN Nur Füllstil.\fi |
| 9429 |
% |
| 9430 |
% \iffalse |
| 9431 |
%<*ignore> |
| 9432 |
% \fi |
| 9433 |
\begin{LTXexample}[morekeywords={[21]fillstyle, linestyle}] |
| 9434 |
\begin{pspicture}(3,2) |
| 9435 |
\pnodes(0,0.5){A}(1,0.5){B}(2.8,2){C} |
| 9436 |
\mirror[mirrorwidth=1.5](A)(B)(C) |
| 9437 |
\addtopsstyle{Beam}{fillstyle=solid, fillcolor=red, opacity=0.3, linestyle=none} |
| 9438 |
\drawwidebeam[beamwidth=0.4](A){}(C) |
| 9439 |
\end{pspicture} |
| 9440 |
\end{LTXexample} |
| 9441 |
% \iffalse |
| 9442 |
%</ignore> |
| 9443 |
% \fi |
| 9444 |
% \end{enumerate} |
| 9445 |
% |
| 9446 |
% \ifGERMAN\section{Fehlerbehandlung}\fi |
| 9447 |
% \ifENGLISH\section{Error handling}\fi |
| 9448 |
% \label{sec:error-handling} |
| 9449 |
% |
| 9450 |
% \ifGERMAN |
| 9451 |
% Alle Strahlen werden direkt mit Postscript berechnet und gezeichnet, |
| 9452 |
% so dass eine umfassende Fehlerbehandlung zur Zeit der Kompilation |
| 9453 |
% nicht möglich ist. Um jedoch trotzdem fehlerfreie Bilder zu bekommen, |
| 9454 |
% wird der Strahlengang abgebrochen, sobald eine Situation eintritt, die |
| 9455 |
% nicht unterstützt wird. Das kann eintreten, falls der Strahl eine |
| 9456 |
% Grenzfläche nicht trifft, Totalreflektion auftritt oder wenn die |
| 9457 |
% folgende Komponente keine Freistrahlverbindungen unterstützt. Die |
| 9458 |
% folgenden Beispiele zeigen Situationen, in denen diese Fehler |
| 9459 |
% auftreten: |
| 9460 |
% \fi |
| 9461 |
% \ifENGLISH |
| 9462 |
% All beam are calculated and drawn directly in Postscript, so that a |
| 9463 |
% comprehensive error handling at compilation time is not possible. If a |
| 9464 |
% situation arises which is not supported by the drawing algorithm, the beam |
| 9465 |
% path is truncated at this point. This happens in the following cases: |
| 9466 |
% \fi |
| 9467 |
% \begin{enumerate} |
| 9468 |
% \item |
| 9469 |
% \ifENGLISH A beam misses an interface. The red beam in the following example |
| 9470 |
% misses the last plane and is truncated at the last valid interface. |
| 9471 |
% \fi |
| 9472 |
% \ifGERMAN Ein Strahl trifft eine Grenzfläche nicht. Der rote Strahl in dem |
| 9473 |
% folgenden Beispiel verpasst die letzte Grenzfläche und endet daher an der |
| 9474 |
% vorhergehenden. |
| 9475 |
% \fi |
| 9476 |
% \iffalse |
| 9477 |
%<*ignore> |
| 9478 |
% \fi |
| 9479 |
\begin{LTXexample} |
| 9480 |
\begin{pspicture}(3,2.7) |
| 9481 |
\pnodes(0,1){A}(3,1){B} |
| 9482 |
\optplate[position=start](A)(B) |
| 9483 |
\lens[lens=4 4 2, abspos=0.5, n=2.5](A)(B) |
| 9484 |
\optplate[position=end, plateheight=0.5](A)(B) |
| 9485 |
\drawbeam{-} |
| 9486 |
\drawbeam[beampos=0.2]{-} |
| 9487 |
\drawbeam[beampos=0.4, linecolor=red]{-} |
| 9488 |
\end{pspicture} |
| 9489 |
\end{LTXexample} |
| 9490 |
% \iffalse |
| 9491 |
%</ignore> |
| 9492 |
% \fi |
| 9493 |
% |
| 9494 |
% \item |
| 9495 |
% \ifENGLISH Total internal reflection occurs at an interface which is |
| 9496 |
% not set up for this. The red beam in the following example would be |
| 9497 |
% reflected, but this is not supported and the beam is truncated at the |
| 9498 |
% interface where the total internal reflection occurs. |
| 9499 |
% \fi |
| 9500 |
% \ifGERMAN Totale interne Reflektion tritt an einer Grenzfläche auf, die |
| 9501 |
% nicht dafür vorgesehen ist. Der rote Strahl im folgenden Beispiel würde |
| 9502 |
% reflektiert werden, aber das wird für diese Komponente nicht unterstützt und |
| 9503 |
% der Strahl endet an der total reflektierenden Grenzfläche. |
| 9504 |
% \fi |
| 9505 |
% \iffalse |
| 9506 |
%<*ignore> |
| 9507 |
% \fi |
| 9508 |
\begin{LTXexample} |
| 9509 |
\begin{pspicture}(3,2.5) |
| 9510 |
\pnodes(0,2){A}(3,0){B} |
| 9511 |
\optplane(A) |
| 9512 |
\optprism[n=1.8](A)([Xnodesep=1.5]A)(B) |
| 9513 |
\optplane(B) |
| 9514 |
\drawbeam[beamangle=5]{-} |
| 9515 |
\drawbeam[beamangle=-5, linecolor=red]{-} |
| 9516 |
\end{pspicture} |
| 9517 |
\end{LTXexample} |
| 9518 |
% \iffalse |
| 9519 |
%</ignore> |
| 9520 |
% \fi |
| 9521 |
% |
| 9522 |
% \ifGERMAN Dasselbe gilt ebenfalls für aufgeweitete Strahlen (siehe |
| 9523 |
% \prettyref{sec:drawwidebeam}). Bei diesen wird der Strahlengang abgebrochen, |
| 9524 |
% falls einer der beiden Randstrahlen einen Fehler aufweist. |
| 9525 |
% \fi |
| 9526 |
% \ifENGLISH These conditions apply to wide beams (see \prettyref{sec:drawwidebeam}) as |
| 9527 |
% well, the beam path is interrupted as soon as one of the marginal rays has an |
| 9528 |
% error. |
| 9529 |
% \fi |
| 9530 |
% \iffalse |
| 9531 |
%<*ignore> |
| 9532 |
% \fi |
| 9533 |
\begin{LTXexample} |
| 9534 |
\begin{pspicture}(3,2.5) |
| 9535 |
\pnodes(0,2){A}(3,0){B} |
| 9536 |
\optplane(A) |
| 9537 |
\optprism[n=1.8](A)([Xnodesep=1.5]A)(B) |
| 9538 |
\optplane(B) |
| 9539 |
\drawwidebeam[beamdiv=10, linecolor=red]{-} |
| 9540 |
\end{pspicture} |
| 9541 |
\end{LTXexample} |
| 9542 |
% \iffalse |
| 9543 |
%</ignore> |
| 9544 |
% \fi |
| 9545 |
% |
| 9546 |
% \item |
| 9547 |
% \ifGERMAN Eine Komponente soll verbunden werden, die jedoch keine |
| 9548 |
% Freistrahlverbindungen unterstützt. In diesem Fall wird die falsche |
| 9549 |
% Komponente und alle Folgenden ignoriert. |
| 9550 |
% \fi |
| 9551 |
% \ifENGLISH A component is to be connected, which does not support |
| 9552 |
% free-ray connections. In this case, the wrong component and all |
| 9553 |
% following ones are ignored. |
| 9554 |
% \fi |
| 9555 |
% \iffalse |
| 9556 |
%<*ignore> |
| 9557 |
% \fi |
| 9558 |
\begin{LTXexample} |
| 9559 |
\begin{pspicture}(3,2.7) |
| 9560 |
\pnodes(0,1){A}(2,1){B} |
| 9561 |
\optplate[position=start](A)(B) |
| 9562 |
\lens[lens=4 4 2, abspos=0.5, n=2.5](A)(B) |
| 9563 |
\fiberdelayline[fdlsize=1 0.7, position=end, fiber=none](A)(B) |
| 9564 |
\drawbeam[beampos=0.2, linecolor=red]{-} |
| 9565 |
\drawbeam[beampos=-0.2, linecolor=blue, beaminsidelast]{-} |
| 9566 |
\end{pspicture} |
| 9567 |
\end{LTXexample} |
| 9568 |
% \iffalse |
| 9569 |
%</ignore> |
| 9570 |
% \fi |
| 9571 |
% \end{enumerate} |
| 9572 |
% |
| 9573 |
% \begin{optionlist} |
| 9574 |
% \boolitem[false]{pswarning} |
| 9575 |
% \ifENGLISH To simplify debugging, you can have a message printed out |
| 9576 |
% if any of these situations arises. The message will be printed to |
| 9577 |
% standard output, when a Postscript interpreter reads the file, |
| 9578 |
% e.g. when you view the file, or you convert it with \opt{ps2pdf} or |
| 9579 |
% similar. |
| 9580 |
% \fi |
| 9581 |
% \ifGERMAN Um eine Fehlersuche zu vereinfachen kann ein Hinweis |
| 9582 |
% ausgegeben werden sobald ein Strahlengang vorzeitig beendet. Die |
| 9583 |
% Fehlermeldung wird auf die Standardausgabe geschrieben, wenn die |
| 9584 |
% Datei mit einem Postscript-Interpreter gelesen wird, also mit einem |
| 9585 |
% Betrachter geöffnet oder z.B. mit \opt{ps2pdf} konvertiert wird. |
| 9586 |
% \fi |
| 9587 |
% \end{optionlist} |
| 9588 |
% |
| 9589 |
% \ifGERMAN\section{Angepasste Strahlen}\fi |
| 9590 |
% \ifENGLISH\section{Custom beams}\fi |
| 9591 |
% \label{sec:custombeam} |
| 9592 |
% |
| 9593 |
% \ifGERMAN |
| 9594 |
% Im Prinzip können alle Strahlengänge mit passender Wahl des Brechungsindex und |
| 9595 |
% der Komponentenparameter (z.B. der Linsenkrümmung) realisiert werden, was |
| 9596 |
% jedoch sehr aufwendig werden kann. Um das zu vereinfachen, besteht die |
| 9597 |
% Möglichkeit die Endpunkte eines Strahls als Anfangspunkte für folgende |
| 9598 |
% Strahlen zu nutzen, so dass man abschnittsweise die Divergenz und die |
| 9599 |
% Ausbreitungsrichtung definieren kann. |
| 9600 |
% \fi |
| 9601 |
% \ifENGLISH |
| 9602 |
% In principal, all kind of beam paths can be realized with an |
| 9603 |
% appropriate choice of refractive index and component parameters |
| 9604 |
% (e.g. lens curvature). This can become very cumbersome, so that the |
| 9605 |
% package provides the means to simplify this. The end points of one |
| 9606 |
% beam path can be used as starting points for the next beam, which |
| 9607 |
% allows piecewise definition of the beam divergence, angle, and |
| 9608 |
% direction. |
| 9609 |
% \fi |
| 9610 |
% |
| 9611 |
% \begin{optionlist} |
| 9612 |
% \choitem[true]{savebeampoints}{true,false,\prm{int}} |
| 9613 |
% \ifGERMAN Speichert die Endpunkte eines \nxLcs{draw*beam} Makros, |
| 9614 |
% vorangegangene Punkte werden überschrieben. \Lcs{drawbeam} und |
| 9615 |
% \Lcs{drawwidebeam} werden getrennt behandelt. Wird hier eine Zahl |
| 9616 |
% \prm{int} $> 0$ angegeben, so können beliebig viele Endpunkte |
| 9617 |
% separat gespeichert werden, siehe z.B. \prettyref{ex:ratchet}. In |
| 9618 |
% der Regel reicht an- und abschalten vollkommen aus, was den Zahlen 1 |
| 9619 |
% und 0 entspricht. |
| 9620 |
% \fi |
| 9621 |
% \ifENGLISH Saves the end points of a \nxLcs{draw*beam} macro, |
| 9622 |
% previous points are overwritten. \Lcs{drawbeam} and |
| 9623 |
% \Lcs{drawwidebeam} are treated separately. If a number \prm{int} $> |
| 9624 |
% 0$ is given, you can save as many end points as you like, see |
| 9625 |
% e.g. \prettyref{ex:ratchet}. But in most cases enabling (1) and |
| 9626 |
% disabling (0) this option is sufficient. |
| 9627 |
% \fi |
| 9628 |
% |
| 9629 |
% \choitem[false]{loadbeampoints}{true,false,\prm{int}} |
| 9630 |
% \ifGERMAN Verwende die Endpunkte eines vorangegangenen Strahls als |
| 9631 |
% Startpunkte. Wird keine Zahl \prm{int} angegeben, dann wird \opt{1} |
| 9632 |
% verwendet. |
| 9633 |
% \fi |
| 9634 |
% \ifENGLISH Use the end points of a previous beam as starting points for the |
| 9635 |
% next beam. If no number \prm{int} is specified, \opt{1} is used. |
| 9636 |
% \fi |
| 9637 |
% \end{optionlist} |
| 9638 |
% |
| 9639 |
% \ifGERMAN Als Beispiel nehmen wir ein Teleskop, die Strahldivergenz am Eingang |
| 9640 |
% und am Ausgang ist Null. Anstatt die Linsenparameter und den Brechungsindex |
| 9641 |
% genau einzustellen, so dass die Ausgangsdivergenz Null ist, zeichnen wir |
| 9642 |
% einfach die drei Strahlenteile mit den gewünschten Divergenzen, und verwenden |
| 9643 |
% die Endpunkte des jeweils vorangegangenen Strahls als neue Ausgangspunkte. |
| 9644 |
% \fi |
| 9645 |
% \ifENGLISH As example we consider a telescope which has no divergence at the |
| 9646 |
% input and output. Usually we would need to tweak the refractive index and the |
| 9647 |
% lens parameters to get an output beam without divergence. Instead, we draw the |
| 9648 |
% three beam parts separately using the end points of the previous beams as new |
| 9649 |
% starting points and specifying the divergence for each beam part |
| 9650 |
% explicitely. |
| 9651 |
% \fi |
| 9652 |
% \iffalse |
| 9653 |
%<*ignore> |
| 9654 |
% \fi |
| 9655 |
\begin{LTXexample}[morekeywords={[21]{savebeampoints, loadbeampoints}}] |
| 9656 |
\begin{pspicture}(4,2) |
| 9657 |
\pnodes(0,1){A}(4,1){B} |
| 9658 |
\begin{optexp} |
| 9659 |
\lens[lens=0.5 0.5 0.5, abspos=0.5](A)(B) |
| 9660 |
\lens[lens=4 4 2, abspos=2](A)(B) |
| 9661 |
\addtopsstyle{Beam}{% |
| 9662 |
fillstyle=solid, fillcolor=green, opacity=0.3} |
| 9663 |
\psset{loadbeampoints} |
| 9664 |
\drawwidebeam[beamwidth=0.2, stopinside](A){1} |
| 9665 |
\drawwidebeam[beamdiv=-60]{1}{2} |
| 9666 |
\drawwidebeam{2}(B) |
| 9667 |
\end{optexp} |
| 9668 |
\end{pspicture} |
| 9669 |
\end{LTXexample} |
| 9670 |
% \iffalse |
| 9671 |
%</ignore> |
| 9672 |
% \fi |
| 9673 |
% |
| 9674 |
% \ifGERMAN Als weiteres Beispiel betrachten wir die Beugung an einem Gittern in |
| 9675 |
% die nullte und erste Beugungsordnung. Zuerst wird der Strahl von dem Eingang |
| 9676 |
% bis zum Gitter gezeichnet, die Endpunkte dieses Strahls werden nun für die |
| 9677 |
% Strahlen in beide Beugungsordnungen verwendet. |
| 9678 |
% \fi |
| 9679 |
% \ifENGLISH The next example shows diffraction from a grating in the zeroth and |
| 9680 |
% first diffraction order. First we draw the beam to the grating, its end points |
| 9681 |
% are used for the beams into both diffraction orders. |
| 9682 |
% \fi |
| 9683 |
% \iffalse |
| 9684 |
%<*ignore> |
| 9685 |
% \fi |
| 9686 |
\begin{LTXexample}[morekeywords={[21]{savebeampoints, loadbeampoints}}, |
| 9687 |
linerange={1-12,16-16}, caption={caption}, label={ex:loadbeampoints}] |
| 9688 |
\begin{pspicture}(3.5,3.5) |
| 9689 |
\pnodes(0,0.5){A}(2,0.5){B}(2,3){C} |
| 9690 |
\nodexn{(C)-(1,0)}{C'} |
| 9691 |
\nodexn{(C)(1,0)}{C''} |
| 9692 |
\optgrating(A)(B)(C) |
| 9693 |
\addtopsstyle{Beam}{% |
| 9694 |
fillstyle=solid, fillcolor=green, opacity=0.3} |
| 9695 |
\drawwidebeam[beamwidth=0.3](A){1} |
| 9696 |
\psset{savebeampoints=false, loadbeampoints} |
| 9697 |
\drawwidebeam{1}(C) |
| 9698 |
\drawwidebeam{1}(C') |
| 9699 |
\drawwidebeam{1}(C'') |
| 9700 |
\rput[b]([offset=0.2]C){0th} |
| 9701 |
\rput[b]([offset=0.2]C'){1st} |
| 9702 |
\rput[b]([offset=0.2]C''){-1st} |
| 9703 |
\end{pspicture} |
| 9704 |
\end{LTXexample} |
| 9705 |
% \iffalse |
| 9706 |
%</ignore> |
| 9707 |
% \fi |
| 9708 |
% |
| 9709 |
% \begin{optionlist} |
| 9710 |
% \choitem[true]{savebeam}{true,false,\prm{int}} |
| 9711 |
% \ifGERMAN Speichert die Endzustände, d.h. Endpunkte und Ausgangsvektoren, |
| 9712 |
% eines \nxLcs{draw*beam} Makros, vorangegangene Werte werden |
| 9713 |
% überschrieben. \Lcs{drawbeam} und \Lcs{drawwidebeam} werden getrennt |
| 9714 |
% behandelt. Wird hier eine Zahl \prm{int} $> 0$ angegeben, so können beliebig |
| 9715 |
% viele Strahlen separat gespeichert werden. In der Regel reicht an- und |
| 9716 |
% abschalten vollkommen aus. |
| 9717 |
% \fi |
| 9718 |
% \ifENGLISH Saves the end conditions, i.e. end points and output vectors, of |
| 9719 |
% each \nxLcs{draw*beam} macro, previous values are |
| 9720 |
% overwritten. \Lcs{drawbeam} and \Lcs{drawwidebeam} are treated |
| 9721 |
% separately. If a number \prm{int} $> 0$ is given, you can save as many end |
| 9722 |
% points as you like, but in most use cases enabling and disabling this option |
| 9723 |
% is sufficient. |
| 9724 |
% \fi |
| 9725 |
% |
| 9726 |
% \choitem[false]{loadbeam}{true,false,\prm{int}} |
| 9727 |
% \ifGERMAN Verwende den Endzustand (Punkte und Richtung) eines |
| 9728 |
% vorangegangenen Strahls als Anfangszustand. Der Parameter |
| 9729 |
% \Lkeyword{beamangle} kann verwendet werden um die Richtung relativ zu der |
| 9730 |
% geladenen zu verändern (siehe folgendes Beispiel). |
| 9731 |
% \fi |
| 9732 |
% \ifENGLISH Use the end condition (points and vectors) of a previous beam as |
| 9733 |
% starting conditions for the next beam. The parameter \Lkeyword{beamangle} |
| 9734 |
% can be used to change the direction relative to the loaded one (see |
| 9735 |
% following example). |
| 9736 |
% \fi |
| 9737 |
% \iffalse |
| 9738 |
%<*ignore> |
| 9739 |
% \fi |
| 9740 |
\begin{LTXexample}[morekeywords={[21]{savebeam, loadbeam}}, |
| 9741 |
linerange={1-10,14-14}, caption={caption}, label={ex:loadbeam}] |
| 9742 |
\begin{pspicture}(3.5,3.5) |
| 9743 |
\pnodes(0,0.5){A}(2,0.5){B}(2,3){C} |
| 9744 |
\optgrating(A)(B)(C) |
| 9745 |
\addtopsstyle{Beam}{% |
| 9746 |
fillstyle=solid, fillcolor=green, opacity=0.3} |
| 9747 |
\drawwidebeam[savebeam, beamwidth=0.3](A){1} |
| 9748 |
\psset{savebeam=false, loadbeam} |
| 9749 |
\drawwidebeam[beamangle=-20]{1}(C) |
| 9750 |
\drawwidebeam{1}(C) |
| 9751 |
\drawwidebeam[beamangle=20]{1}(C) |
| 9752 |
\rput[b]([offset=0.2]C){0th} |
| 9753 |
\rput[b]([Xnodesep=-0.9, offset=0.2]C){1st} |
| 9754 |
\rput[b]([Xnodesep=0.9,offset=0.2]C){-1st} |
| 9755 |
\end{pspicture} |
| 9756 |
\end{LTXexample} |
| 9757 |
% \iffalse |
| 9758 |
%</ignore> |
| 9759 |
% \fi |
| 9760 |
% |
| 9761 |
% \ifGERMAN Beachten Sie, dass \Lkeyword{loadbeam} und |
| 9762 |
% \Lkeyword{savebeam} nicht immer funktionieren, wenn der Strahlengang an |
| 9763 |
% einem halbdurchlässigen Spiegel oder einem Strahlteiler endet. In |
| 9764 |
% diesen Fällen wird nur der transmittierte Strahlvektor gespeichert, |
| 9765 |
% soll der Strahlengang über den reflektierenden Weg fortgesetzt werden, |
| 9766 |
% so ist das nicht möglich. |
| 9767 |
% |
| 9768 |
% In den beiden folgenden Beispielen wird demnach der rote Strahl, der |
| 9769 |
% von der Komponente zum Knoten \prm{B} fortgesetzt werden soll, nicht |
| 9770 |
% gezeichnet. |
| 9771 |
% \fi |
| 9772 |
% \ifENGLISH Please note, that \Lkeyword{loadbeam} and |
| 9773 |
% \Lkeyword{savebeam} do not always work, if the beam path ends inside a |
| 9774 |
% semitransparent mirror or a beamsplitter. In these cases only the |
| 9775 |
% transmitted ray vector is saved and continuing the beam via the |
| 9776 |
% reflective path is not possible. |
| 9777 |
% |
| 9778 |
% Accordingly, in the following examples the red beam is not drawn, |
| 9779 |
% which should continue the green beam from the component to node |
| 9780 |
% \prm{B}. |
| 9781 |
% \fi |
| 9782 |
% \iffalse |
| 9783 |
%<*ignore> |
| 9784 |
% \fi |
| 9785 |
\begin{LTXexample}[linerange={1-6,9-9}, morekeywords={[21]{savebeam, loadbeam}}] |
| 9786 |
\begin{pspicture}(3,1.5) |
| 9787 |
\pnodes(0,0.5){A}(1.5,1.5){B}(3,0.5){C} |
| 9788 |
\beamsplitter(A)(1.5,0.5)(B) |
| 9789 |
\drawbeam[beaminsidelast, savebeam](A){} |
| 9790 |
\drawbeam[linecolor=red, beaminsidefirst, loadbeam]{}(B) |
| 9791 |
\drawbeam[linecolor=blue, beaminsidefirst, loadbeam]{}(C) |
| 9792 |
\psdot(B)\uput[-30](B){B} |
| 9793 |
\psdot(C)\uput[-120](C){C} |
| 9794 |
\end{pspicture} |
| 9795 |
\end{LTXexample} |
| 9796 |
|
| 9797 |
\begin{LTXexample}[linerange={1-6,9-9}, morekeywords={[21]{savebeam, loadbeam}}] |
| 9798 |
\begin{pspicture}(3,1.5) |
| 9799 |
\pnodes(0,0.5){A}(1.5,1.5){B}(3,0.5){C} |
| 9800 |
\mirror[mirrortype=semitrans](A)(1.5,0.5)(B) |
| 9801 |
\drawbeam[beaminsidelast, savebeam](A){} |
| 9802 |
\drawbeam[linecolor=red, beaminsidefirst, loadbeam]{}(B) |
| 9803 |
\drawbeam[linecolor=blue, beaminsidefirst, loadbeam]{}(C) |
| 9804 |
\psdot(B)\uput[-30](B){B} |
| 9805 |
\psdot(C)\uput[-120](C){C} |
| 9806 |
\end{pspicture} |
| 9807 |
\end{LTXexample} |
| 9808 |
% \iffalse |
| 9809 |
%</ignore> |
| 9810 |
% \fi |
| 9811 |
% \end{optionlist} |
| 9812 |
% |
| 9813 |
% |
| 9814 |
% |
| 9815 |
% \begin{optionlist} |
| 9816 |
% \boolitem[false]{startinside} |
| 9817 |
% \ifENGLISH |
| 9818 |
% The parameter \Lkeyword{beaminsidefirst} controls if the internal beams are |
| 9819 |
% drawn inside the first component. However, for custom beams it can also be |
| 9820 |
% necessary to trace the internal beam of the first component without drawing |
| 9821 |
% it, e.g. if the previous beam ended at the first interface. |
| 9822 |
% |
| 9823 |
% In the following example the red beam is the wrong continuation of the |
| 9824 |
% incoming green beam because it assumes that the loaded beam conditions refer |
| 9825 |
% to the output interface. But the previous beam stopped at the input |
| 9826 |
% interface, so one needs to set \Lkeyword{startinside} in order to continue |
| 9827 |
% the beam properly (see blue beam). The dashed line helps to understand the |
| 9828 |
% correct beam path through the lens. |
| 9829 |
% \fi |
| 9830 |
% \ifGERMAN Mit dem Parameter \Lkeyword{beaminsidefirst} kann eingestellt |
| 9831 |
% werden, ob der interne Strahlengang in der erste Komponente gezeichnet |
| 9832 |
% wird. Für angepasste Strahlengänge kann es aber notwendig sein dem internen |
| 9833 |
% Strahlengang in der ersten Komponente zu folgen ohne diesen zu zeichnen, |
| 9834 |
% z.B. wenn der vorangegangene Strahl an der ersten Grenzfläche schon endet. |
| 9835 |
% |
| 9836 |
% Im folgenden Beispiel wird der einfallende grüne Strahl falsch durch den |
| 9837 |
% roten Strahl fortgesetzt, da der grüne an der linken Grenzfläche endet, der |
| 9838 |
% rote aber fälschlicherweise annimmt, dass der Endzustand sich auf die rechte |
| 9839 |
% Grenzfläche bezieht. Dem blauen Strahl wird nun mit \Lkeyword{startinside} |
| 9840 |
% mitgeteilt, dass der Endzustand sich auf die linke Grenzfläche bezieht. |
| 9841 |
% \fi |
| 9842 |
% |
| 9843 |
% \iffalse |
| 9844 |
%<*ignore> |
| 9845 |
% \fi |
| 9846 |
\begin{LTXexample}[morekeywords = {[21]{startinside}}] |
| 9847 |
\begin{pspicture*}(0,2)(3.05,6) |
| 9848 |
\optplane(0,2) |
| 9849 |
\lens[lens=8 8 8, abspos=0.6, n=1.8](0.5,2)(3,2) |
| 9850 |
\optplate[position=1, plateheight=6](0.5,2)(3,2) |
| 9851 |
\psset{savebeam=false} |
| 9852 |
\drawbeam[beampos=3, linestyle=dashed]{-} |
| 9853 |
\drawbeam[beampos=3, savebeam]{1-2} |
| 9854 |
\drawbeam[loadbeam, linecolor=red]{2-3} |
| 9855 |
\drawbeam[loadbeam, startinside, linecolor=blue]{2-3} |
| 9856 |
\end{pspicture*} |
| 9857 |
\end{LTXexample} |
| 9858 |
% \iffalse |
| 9859 |
%</ignore> |
| 9860 |
% \fi |
| 9861 |
% |
| 9862 |
% \boolitem[false]{stopinside} |
| 9863 |
% \ifENGLISH This option is equivalent to \Lkeyword{startinside} but refers |
| 9864 |
% to the last component. |
| 9865 |
% \fi |
| 9866 |
% \ifGERMAN Äquivalent zu \Lkeyword{startinside}, bezieht sich aber auf die |
| 9867 |
% letzte Komponenten. |
| 9868 |
% \fi |
| 9869 |
% \iffalse |
| 9870 |
%<*ignore> |
| 9871 |
% \fi |
| 9872 |
\begin{LTXexample}[morekeywords = {[21]{stopinside}}] |
| 9873 |
\begin{pspicture*}(0,2)(3.05,6) |
| 9874 |
\optplane(0,2) |
| 9875 |
\lens[lens=8 8 8, abspos=0.6, n=1.8](0.5,2)(3,2) |
| 9876 |
\optplate[position=1, plateheight=6](0.5,2)(3,2) |
| 9877 |
\psset{savebeam=false} |
| 9878 |
\drawbeam[beampos=3, linestyle=dashed]{-} |
| 9879 |
\drawbeam[beampos=3, savebeam, stopinside]{1-2} |
| 9880 |
\drawbeam[loadbeam, linecolor=blue]{2-3} |
| 9881 |
\end{pspicture*} |
| 9882 |
\end{LTXexample} |
| 9883 |
% \iffalse |
| 9884 |
%</ignore> |
| 9885 |
% \fi |
| 9886 |
% \end{optionlist} |
| 9887 |
% |
| 9888 |
% |
| 9889 |
% \ifGERMAN\section{Faserverbindungen}\fi |
| 9890 |
% \ifENGLISH\section{Drawing fibers}\fi |
| 9891 |
% \label{sec:drawfiber} |
| 9892 |
% |
| 9893 |
% \ifENGLISH |
| 9894 |
% All available components can be connected with fiber connections, the |
| 9895 |
% fiber components in \prettyref{chap:fibercomp} are connected automatically. |
| 9896 |
% \fi |
| 9897 |
% \ifGERMAN |
| 9898 |
% Alle Komponenten können mit Fasern verbunden werden, die Faserkomponenten |
| 9899 |
% in \prettyref{chap:fibercomp} werden automatisch verbunden. |
| 9900 |
% \fi |
| 9901 |
% |
| 9902 |
% \begin{ltxsyntax} |
| 9903 |
% \xLcs{drawfiber}\cmditem{drawfiber}[options]{obj$_1$}{obj$_2$}\ldots |
| 9904 |
% \end{ltxsyntax} |
| 9905 |
% \ifENGLISH |
| 9906 |
% This macro draws fiber connections and takes a variable number of |
| 9907 |
% arguments (minimum of two) which can be either an ID, an ID range, a |
| 9908 |
% \Lkeyword{compname}, or a PSTricks node (see |
| 9909 |
% \prettyref{sec:accessobj}). To distinguish between nodes and |
| 9910 |
% components, nodes must be either enclosed in parenthesis within the |
| 9911 |
% brackets, or enclosed only in parenthesis: |
| 9912 |
% \Lcs{drawfiber}\opt{\{(node)\}\{comp\}}, or |
| 9913 |
% \Lcs{drawfiber}\opt{(node)\{comp\}}. If you specify more than two |
| 9914 |
% arguments, it draws the connections $1\rightarrow 2$, $2\rightarrow |
| 9915 |
% 3$, and so on. |
| 9916 |
% |
| 9917 |
% The automatic fiber connections are drawn internally with |
| 9918 |
% \Lcs{drawfiber} commands from each reference node to the component. |
| 9919 |
% \fi |
| 9920 |
% \ifGERMAN |
| 9921 |
% Dieses Makro zeichnet Faserverbindungen und akzeptiert eine variable |
| 9922 |
% Anzahl an Argumenten (mindestens zwei), die entweder eine ID, ein |
| 9923 |
% ID-Intervall, ein \Lkeyword{compname} oder ein PSTricks-Knoten sein |
| 9924 |
% können (siehe \prettyref{sec:accessobj}. Um zwischen Knoten und |
| 9925 |
% Komponenten unterscheiden zu können, müssen Knoten entweder in runde |
| 9926 |
% Klammern innerhalb der geschweiften Klammern eingeschlossen werden |
| 9927 |
% oder dürfen nur runde Klammern haben: |
| 9928 |
% \Lcs{drawbeam}\opt{\{(node)\}\{comp\}}, oder |
| 9929 |
% \Lcs{drawbeam}\opt{(node)\{comp\}}. Werden mehr als zwei Argumente |
| 9930 |
% mitgegeben, werden die Verbindungen $1\rightarrow 2$, $2\rightarrow |
| 9931 |
% 3$, usw. gezeichnet. |
| 9932 |
% |
| 9933 |
% Die automatischen Faserverbindungen werden intern als |
| 9934 |
% \Lcs{drawfiber} von den Referenzknoten zur Komponente gezeichnet. |
| 9935 |
% \fi |
| 9936 |
% |
| 9937 |
% \ifENGLISH\subsection{Fiber angles}\fi |
| 9938 |
% \ifGERMAN\subsection{Faserwinkel}\fi |
| 9939 |
% \label{sec:drawfiber-angles} |
| 9940 |
% |
| 9941 |
% \ifENGLISH |
| 9942 |
% The fibers are usually drawn as \Lcs*{nccurve} connections, the angles at both |
| 9943 |
% curve ends are automatically determined by the component orientation and |
| 9944 |
% depend on whether you connect a component with a component, or a component |
| 9945 |
% with a node. |
| 9946 |
% \fi |
| 9947 |
% \ifGERMAN |
| 9948 |
% Üblicherweise werden Fasern als \Lcs*{nccurve}-Verbindungen gezeichnet, die |
| 9949 |
% Winkel an beiden Kurvenenden werden automatisch anhand der |
| 9950 |
% Komponentenausrichtung bestimmt und hängen davon ab, ob eine Komponente mit |
| 9951 |
% einer anderen Komponente oder einem Knoten verbunden wird. |
| 9952 |
% \fi |
| 9953 |
% |
| 9954 |
% \ifENGLISH\minisec{Component with node}\fi |
| 9955 |
% \ifGERMAN\minisec{Komponente mit Knoten}\fi |
| 9956 |
% |
| 9957 |
% \ifENGLISH |
| 9958 |
% A connection of a component with a node is what is used for automatic |
| 9959 |
% connections (see \prettyref{sec:drawconn-auto}). Consider the following |
| 9960 |
% example for clarification of the curve alignment: |
| 9961 |
% \fi |
| 9962 |
% \ifGERMAN |
| 9963 |
% Eine Verbindung zwischen einer Komponente und einem Knoten ist das, was bei |
| 9964 |
% automatischen Verbindungen verwendet wird (siehe |
| 9965 |
% \prettyref{sec:drawconn-auto}). Folgendes Beispiel erläutert die Ausrichtung |
| 9966 |
% der Kurve: |
| 9967 |
% \fi |
| 9968 |
% |
| 9969 |
% \iffalse |
| 9970 |
%<*ignore> |
| 9971 |
% \fi |
| 9972 |
\begin{LTXexample}[linerange={1-3,10-11}] |
| 9973 |
\begin{pspicture}(-1,-0.7)(7,2.7) |
| 9974 |
\pnodes(0,1){A}(6,1){B} |
| 9975 |
\optbox[angle=30](A)(B) |
| 9976 |
\psdot(\oenodeRefA{})\uput[180](\oenodeRefA{}){RefA}% |
| 9977 |
\psdot(\oenodeRefB{})\uput[0](\oenodeRefB{}){RefB}% |
| 9978 |
\psdot(\oenodeTrefA{})\uput[180](\oenodeTrefA{}){TrefA}% |
| 9979 |
\psdot(\oenodeTrefB{})\uput[0](\oenodeTrefB{}){TrefB}% |
| 9980 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{})(\oenodeTrefB{}) |
| 9981 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}) |
| 9982 |
\drawfiber(A){}(B) |
| 9983 |
\end{pspicture} |
| 9984 |
\end{LTXexample} |
| 9985 |
% \iffalse |
| 9986 |
%</ignore> |
| 9987 |
% \fi |
| 9988 |
% |
| 9989 |
% \ifENGLISH |
| 9990 |
% The angle at the component itself agrees with the transformed reference line. |
| 9991 |
% The angle at the node corresponds to the angle of the original reference line |
| 9992 |
% of the component which it gets connected to. The fiber is always directed to |
| 9993 |
% the component node. |
| 9994 |
% |
| 9995 |
% Considering the following example, this means that the start angles of the red |
| 9996 |
% fibers are rotated by 180° with respect to the blue fibers. The angles at the |
| 9997 |
% component do not change. |
| 9998 |
% \fi |
| 9999 |
% \ifGERMAN |
| 10000 |
% Der Winkel an der Komponente entspricht dem der transformierten |
| 10001 |
% Referenzlinie. Der Winkel an dem Knoten entspricht dem der ursprünglichen |
| 10002 |
% Referenzlinie der Komponente zu der die Verbindung geht. Die Faser ist in |
| 10003 |
% Richtung des entsprechenden Komponentenknotens orientiert. |
| 10004 |
% |
| 10005 |
% Das führt dazu, dass im folgenden Beispiel die Anfangswinkel der roten Fasern |
| 10006 |
% um 180° gegenüber den blauen Fasern gedreht sind, die Winkel an der Komponente |
| 10007 |
% bleiben unverändert. |
| 10008 |
% \fi |
| 10009 |
% |
| 10010 |
% \iffalse |
| 10011 |
%<*ignore> |
| 10012 |
% \fi |
| 10013 |
\begin{LTXexample}[linerange={1-1,4-4,7-14}] |
| 10014 |
\begin{pspicture}(-2,-1.6)(2,2) |
| 10015 |
\psset[optexp]{optboxsize=1.6 0.8} |
| 10016 |
\addtopsstyle{Fiber}{ArrowInside=->, ArrowInsidePos=0.3, arrowscale=1.5} |
| 10017 |
\optbox[position=end](0,1)(0,0) |
| 10018 |
\psarc[fillstyle=solid,fillcolor=gray!20, linestyle=none](0,0){2}{0}{180} |
| 10019 |
\psline[linestyle=dashed]([Xnodesep=-2]\oenodeIn{})([Xnodesep=2]\oenodeIn{}) |
| 10020 |
\addtopsstyle{Fiber}{linecolor=blue} |
| 10021 |
\multido{\i=10+40}{5}{% |
| 10022 |
\drawfiber(2;\i){} |
| 10023 |
} |
| 10024 |
\addtopsstyle{Fiber}{linecolor=red!90!black} |
| 10025 |
\drawfiber(2;-20){} |
| 10026 |
\drawfiber(2;200){} |
| 10027 |
\end{pspicture} |
| 10028 |
\end{LTXexample} |
| 10029 |
% \iffalse |
| 10030 |
%</ignore> |
| 10031 |
% \fi |
| 10032 |
% |
| 10033 |
% \ifENGLISH\minisec{Component with component}\fi |
| 10034 |
% \ifGERMAN\minisec{Komponente mit Komponente}\fi |
| 10035 |
% |
| 10036 |
% \ifENGLISH |
| 10037 |
% This variant is very helpful to achieve smoother connections between |
| 10038 |
% components which are not aligned on the same reference line but are arranged |
| 10039 |
% maybe in a loop or similar, see \prettyref{ex:nalm} and |
| 10040 |
% \prettyref{ex:recirc-loop}. |
| 10041 |
% |
| 10042 |
% In this case, the curve angles are determined by the orientation of |
| 10043 |
% the component which the respective curve end is connected to. The |
| 10044 |
% fibers are always directed away from the component center. |
| 10045 |
% \fi |
| 10046 |
% \ifGERMAN |
| 10047 |
% Diese Variante ist sehr nützlich um glattere Verbindungen zwischen Komponenten |
| 10048 |
% zu erreichen, die nicht auf derselben Referenzlinie positioniert sind, sondern |
| 10049 |
% z.B. in einer Schleife angeordnet werden, siehe \prettyref{ex:nalm} und |
| 10050 |
% \prettyref{ex:recirc-loop}. |
| 10051 |
% |
| 10052 |
% In diesem Fall werden die Kurvenwinkel von der Komponente bestimmt, mit der |
| 10053 |
% das jeweilige Ende verbunden ist. Die Fasern zeigen immer von der |
| 10054 |
% Komponentenmitte weg. |
| 10055 |
% \fi |
| 10056 |
% |
| 10057 |
% \iffalse |
| 10058 |
%<*ignore> |
| 10059 |
% \fi |
| 10060 |
\begin{LTXexample}[linerange={1-4,9-10}] |
| 10061 |
\begin{pspicture}(0,-0.8)(7,0.8) |
| 10062 |
\pnodes(0,0){A}(3,0){B}(4,0){C}(7,0){D} |
| 10063 |
\optbox[angle=30](A)(B) |
| 10064 |
\optbox[angle=-30](C)(D) |
| 10065 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{1})(\oenodeTrefB{1}) |
| 10066 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{2})(\oenodeTrefB{2}) |
| 10067 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{1})(\oenodeRefB{2}) |
| 10068 |
\psdot(\oenodeRefA{1})\psdot(\oenodeRefB{2}) |
| 10069 |
\drawfiber(A){1}{2}(D) |
| 10070 |
\end{pspicture} |
| 10071 |
\end{LTXexample} |
| 10072 |
% \iffalse |
| 10073 |
%</ignore> |
| 10074 |
% \fi |
| 10075 |
% |
| 10076 |
% \ifENGLISH These automatically calculated start and stop angles can be changed |
| 10077 |
% in a variety of ways, the available parameters are listed in the following. |
| 10078 |
% \fi |
| 10079 |
% \ifGERMAN |
| 10080 |
% Diese automatisch berechneten Winkel können vielfältig manipuliert werden, die |
| 10081 |
% möglichen Parameter sind im Folgenden aufgelistet. |
| 10082 |
% \fi |
| 10083 |
% |
| 10084 |
% \begin{optionlist} |
| 10085 |
% \choitem[relative]{fiberalign}{rel,relative,center,abs,absolute} |
| 10086 |
% \ifENGLISH Set the reference for the fiber angles. |
| 10087 |
% \fi |
| 10088 |
% \ifGERMAN |
| 10089 |
% Wählt die Referenz für die Faserwinkel. |
| 10090 |
% \fi |
| 10091 |
% \begin{valuelist} |
| 10092 |
% \item[relative] |
| 10093 |
% \ifENGLISH The fiber angles are relative to the component. When |
| 10094 |
% connecting a node to a component, the angle at the node is that of the |
| 10095 |
% component reference line. The angle at the component agrees with that of |
| 10096 |
% its transformed reference line. |
| 10097 |
% \fi |
| 10098 |
% \ifGERMAN |
| 10099 |
% Die Faserwinkel sind relativ zur Komponente. Wird ein Knoten mit der |
| 10100 |
% Komponente verbunden, so entspricht der Winkel am Knoten dem der |
| 10101 |
% Referenzlinie der Komponente. Der Winkel an der Komponente entspricht dem |
| 10102 |
% der transformierten Referenzlinie. |
| 10103 |
% \fi |
| 10104 |
% \iffalse |
| 10105 |
%<*ignore> |
| 10106 |
% \fi |
| 10107 |
\begin{LTXexample}[linerange={1-4,9-10}] |
| 10108 |
\begin{pspicture}(1,-1.7)(7,1.7) |
| 10109 |
\pnodes(0,0){A}(4,0){B}(3,0){C}(7,0){D} |
| 10110 |
\optbox[angle=30](A)(B) |
| 10111 |
\optbox[angle=-30](C)(D) |
| 10112 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{1})(\oenodeTrefB{1}) |
| 10113 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{2})(\oenodeTrefB{2}) |
| 10114 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{1})(\oenodeRefB{2}) |
| 10115 |
\psdot(\oenodeRefA{1})\psdot(\oenodeRefB{2}) |
| 10116 |
\drawfiber(A){1}{2}(D) |
| 10117 |
\end{pspicture} |
| 10118 |
\end{LTXexample} |
| 10119 |
% \iffalse |
| 10120 |
%</ignore> |
| 10121 |
% \fi |
| 10122 |
% |
| 10123 |
% \item[center] |
| 10124 |
% \ifENGLISH |
| 10125 |
% The fiber angles both at the node and the component are relative to |
| 10126 |
% the connection between the involved interface node and the center |
| 10127 |
% node of the component. In most cases this is equivalent to |
| 10128 |
% \opt{relative}, but necessary e.g. for \Lcomp{optcirculator} and |
| 10129 |
% \Lcomp{elecmixer}. In the example, the green fiber shows the correct |
| 10130 |
% alignment, while the red one is with \opt{relative} alignment. |
| 10131 |
% \fi |
| 10132 |
% \ifGERMAN |
| 10133 |
% Die Winkel sowohl am Knoten als auch an der Komponente sind relativ |
| 10134 |
% zu der Verbindung zwischen dem betroffenen Komponentenknoten und der |
| 10135 |
% Komponentenmitte. Meistens ist das äquivalent zu \opt{relative}, |
| 10136 |
% wird aber z.B. für \Lcomp{optcirculator} und \Lcomp{elecmixer} |
| 10137 |
% benötigt. In dem Beispiel hat die grüne Faser die korrekte |
| 10138 |
% Ausrichtung, während die rote \opt{relative} ausgerichtet wird. |
| 10139 |
% \fi |
| 10140 |
% |
| 10141 |
% \iffalse |
| 10142 |
%<*ignore> |
| 10143 |
% \fi |
| 10144 |
\begin{LTXexample}[morekeywords={[21]fiberalign}] |
| 10145 |
\begin{pspicture}(1,0)(3,2) |
| 10146 |
\addtopsstyle{Fiber}{arrowscale=1.3, arrows=->, arrowinset=0} |
| 10147 |
\optcirculator[fiber=t](0,0.5)(3,2)(1.5,0) |
| 10148 |
\drawfiber[linecolor=red]{}(1.5,0) |
| 10149 |
\drawfiber[fiberalign=center, linecolor=green]{}(1.5,0) |
| 10150 |
\end{pspicture} |
| 10151 |
\end{LTXexample} |
| 10152 |
% \iffalse |
| 10153 |
%</ignore> |
| 10154 |
% \fi |
| 10155 |
% |
| 10156 |
% \item[absolute] |
| 10157 |
% \ifENGLISH The fiber angles are absolute, no automatic values are added. |
| 10158 |
% \fi |
| 10159 |
% \ifGERMAN |
| 10160 |
% Die Faserwinkel werden als absolute Werte angegeben, die automatischen |
| 10161 |
% Winkel werden nicht berücksichtigt. |
| 10162 |
% \fi |
| 10163 |
% |
| 10164 |
% \iffalse |
| 10165 |
%<*ignore> |
| 10166 |
% \fi |
| 10167 |
\begin{LTXexample}[morekeywords={[21]fiberalign}, linerange={1-3,7-8}] |
| 10168 |
\begin{pspicture}(1,-1)(4.5,1) |
| 10169 |
\pnodes(0,0){A}(4,0){B} |
| 10170 |
\optbox[angle=30](A)(B) |
| 10171 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{})(\oenodeTrefB{}) |
| 10172 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}) |
| 10173 |
\psdot(\oenodeRefA{})\psdot(\oenodeRefB{}) |
| 10174 |
\drawfiber[fiberalign=abs, ncurv=1.5](A){}(B) |
| 10175 |
\end{pspicture} |
| 10176 |
\end{LTXexample} |
| 10177 |
% \iffalse |
| 10178 |
%</ignore> |
| 10179 |
% \fi |
| 10180 |
% \end{valuelist} |
| 10181 |
% |
| 10182 |
% \numitem[0]{fiberangleA} |
| 10183 |
% \ifENGLISH An additive value for the starting angle, the total angle depends |
| 10184 |
% on \Lkeyword{fiberalign}. If this parameter is set to \opt{absolute}, then |
| 10185 |
% \Lkeyword{fiberangleA} is the total angle, otherwise its value is added to |
| 10186 |
% the calculated angle. |
| 10187 |
% \fi |
| 10188 |
% \ifGERMAN |
| 10189 |
% Ein additiver Wert für den Anfangswinkel, der gesamte Winkel hängt von |
| 10190 |
% \Lkeyword{fiberalign} ab. Ist dieser auf \opt{absolute} eingestellt, so ist |
| 10191 |
% \Lkeyword{fiberangleA} der absolute Winkel, andernfalls wird der Wert zu dem |
| 10192 |
% automatisch berechneten Winkel hinzuaddiert. |
| 10193 |
% \fi |
| 10194 |
% |
| 10195 |
% \numitem[0]{fiberangleB} |
| 10196 |
% \ifENGLISH Like \Lkeyword{fiberangleA}, but for the end angle.\fi |
| 10197 |
% \ifGERMAN Wie \Lkeyword{fiberangleB}, aber für den Endwinkel.\fi |
| 10198 |
% |
| 10199 |
% \iffalse |
| 10200 |
%<*ignore> |
| 10201 |
% \fi |
| 10202 |
\begin{LTXexample}[morekeywords={[21]fiberangleA, fiberangleB}, linerange={1-3,7-9}] |
| 10203 |
\begin{pspicture}(0,-1)(4,1) |
| 10204 |
\pnodes(0,0){A}(4,0){B} |
| 10205 |
\optbox[angle=30](A)(B) |
| 10206 |
\psline[style=Refline, linestyle=dashed](\oenodeTrefA{})(\oenodeTrefB{}) |
| 10207 |
\psline[style=Refline, linestyle=dashed](\oenodeRefA{})(\oenodeRefB{}) |
| 10208 |
\psdot(\oenodeRefA{})\psdot(\oenodeRefB{}) |
| 10209 |
\drawfiber[fiberangleA=-90](A){} |
| 10210 |
\drawfiber[fiberangleB=-90]{}(B) |
| 10211 |
\end{pspicture} |
| 10212 |
\end{LTXexample} |
| 10213 |
% \iffalse |
| 10214 |
%</ignore> |
| 10215 |
% \fi |
| 10216 |
% |
| 10217 |
% \choitem[auto]{startnode}{auto, N, 1, 2, \ldots} |
| 10218 |
% \ifGERMAN Für die Verbindungen mit \Lcs{drawfiber} werden die Knoten |
| 10219 |
% genommen, die sich am nächsten sind. Das passt häufig, aber nicht |
| 10220 |
% immer. Hiermit kann der Startknoten explizit gewählt werden. |
| 10221 |
% \fi |
| 10222 |
% \ifENGLISH The connections with \Lcs{drawfiber} are drawn between the |
| 10223 |
% two nodes which are nearest to each other. This fits most of the time, but not |
| 10224 |
% always. With this option you can choose the start node explicitely. |
| 10225 |
% \fi |
| 10226 |
% |
| 10227 |
% \choitem[auto]{stopnode}{auto, N, 1, 2, \ldots} |
| 10228 |
% \ifGERMAN Genau wie \Lkeyword{startnode}, aber für den Stopknoten.\fi |
| 10229 |
% \ifENGLISH Like \Lkeyword{startnode}, but for the stop node.\fi |
| 10230 |
% \end{optionlist} |
| 10231 |
% |
| 10232 |
% \ifENGLISH |
| 10233 |
% The following examples show some use cases for \Lkeyword{startnode} and |
| 10234 |
% \Lkeyword{stopnode}. |
| 10235 |
% \fi |
| 10236 |
% \ifGERMAN |
| 10237 |
% Die folgenden Beispiele zeigen Anwendungsmöglichkeiten für |
| 10238 |
% \Lkeyword{startnode} und \Lkeyword{stopnode}. |
| 10239 |
% \fi |
| 10240 |
% |
| 10241 |
% \begin{enumerate} |
| 10242 |
% \item |
| 10243 |
% \ifENGLISH This example shows a situation, where choosing the nearest nodes |
| 10244 |
% is correct. |
| 10245 |
% \fi |
| 10246 |
% \ifGERMAN In diesem Fall ist der nächstgelegene Knoten auch der richtige. |
| 10247 |
% \fi |
| 10248 |
% |
| 10249 |
% \iffalse |
| 10250 |
%<*ignore> |
| 10251 |
% \fi |
| 10252 |
\begin{LTXexample}[linerange={1-1,3-6}] |
| 10253 |
\begin{pspicture}(3,2) |
| 10254 |
\psset{label=0, optboxwidth=1} |
| 10255 |
\pnodes(-0.5,1){A}(1.5,1){B}(3.5,1){C} |
| 10256 |
\optbox(A)(B){Box1}\optbox(B)(C){Box2} |
| 10257 |
\drawfiber{1}{2} |
| 10258 |
\end{pspicture} |
| 10259 |
\end{LTXexample} |
| 10260 |
% \iffalse |
| 10261 |
%</ignore> |
| 10262 |
% \fi |
| 10263 |
% |
| 10264 |
% \item |
| 10265 |
% \ifENGLISH In this case, the nearest connection is not well defined because |
| 10266 |
% two connections have the same length. |
| 10267 |
% \fi |
| 10268 |
% \ifGERMAN |
| 10269 |
% Hier ist der kürzeste Abstand nicht eindeutig definiert, da es zwei |
| 10270 |
% Verbindungen mit der gleichen Länge gibt. |
| 10271 |
% \fi |
| 10272 |
% |
| 10273 |
% \iffalse |
| 10274 |
%<*ignore> |
| 10275 |
% \fi |
| 10276 |
\begin{LTXexample}[linerange={1-1,3-6}] |
| 10277 |
\begin{pspicture}(2,2) |
| 10278 |
\psset{label=0} |
| 10279 |
\pnodes(0,0.5){A}(2,0.5){B}([offset=1]B){C}(A|C){D} |
| 10280 |
\optbox(A)(B){Box1}\optbox(C)(D){Box2} |
| 10281 |
\drawfiber{1}{2} |
| 10282 |
\end{pspicture} |
| 10283 |
\end{LTXexample} |
| 10284 |
% \iffalse |
| 10285 |
%</ignore> |
| 10286 |
% \fi |
| 10287 |
% |
| 10288 |
% \item |
| 10289 |
% \ifENGLISH To select the desired connection it is often enough to set either |
| 10290 |
% \Lkeyword{startnode} or \Lkeyword{stopnode}. With this you fix one node, the |
| 10291 |
% other is the one nearest to it. In rare cases it might be necessary to fix |
| 10292 |
% both nodes. |
| 10293 |
% \fi |
| 10294 |
% \ifGERMAN |
| 10295 |
% Um die gewünschte Verbindung zu wählen ist es meistens ausreichend entweder |
| 10296 |
% \Lkeyword{startnode} oder \Lkeyword{stopnode} zu setzen. Ist ein Knoten fest |
| 10297 |
% vorgegeben, wird der anderen wieder als der mit dem kürzesten Abstand |
| 10298 |
% gewählt. Nur in Ausnahmefällen sollte es notwendig sein beide Knoten |
| 10299 |
% explizit anzugegeben. |
| 10300 |
% \fi |
| 10301 |
% |
| 10302 |
% \iffalse |
| 10303 |
%<*ignore> |
| 10304 |
% \fi |
| 10305 |
\begin{LTXexample}[morekeywords={[21]startnode}] |
| 10306 |
\begin{pspicture}(2,2) |
| 10307 |
\psset{label=0} |
| 10308 |
\pnodes(0,0.5){A}(2,0.5){B}([offset=1]B){C}(A|C){D} |
| 10309 |
\optbox(A)(B){Box1}\optbox(C)(D){Box2} |
| 10310 |
\drawfiber[startnode=1]{1}{2} |
| 10311 |
\drawfiber[startnode=N, linecolor=black]{1}{2} |
| 10312 |
\end{pspicture} |
| 10313 |
\end{LTXexample} |
| 10314 |
% \iffalse |
| 10315 |
%</ignore> |
| 10316 |
% \fi |
| 10317 |
% |
| 10318 |
% \item |
| 10319 |
% \ifENGLISH Another example where you need to specify the |
| 10320 |
% \Lkeyword{startnode}. |
| 10321 |
% \fi |
| 10322 |
% \ifGERMAN Ein weiteres Beispiel, bei dem \Lkeyword{startnode} vorgegeben |
| 10323 |
% werden muss. |
| 10324 |
% \fi |
| 10325 |
% |
| 10326 |
% \iffalse |
| 10327 |
%<*ignore> |
| 10328 |
% \fi |
| 10329 |
\begin{LTXexample}[morekeywords={[21]startnode}, caption={caption}, label={ex:nalm}] |
| 10330 |
\begin{pspicture}(2.1,3) |
| 10331 |
\pnodes(0,0){A}(2,0){B}(0.3,3){C}(1.7,3){D} |
| 10332 |
\psset{fiber=none, arrowscale=1.2, arrowinset=0} |
| 10333 |
\optcoupler[fiber=l, |
| 10334 |
addtoFiberIn1={angleA=0, ArrowInside=->}, |
| 10335 |
addtoFiberIn2={angleA=180, arrows=<-}, |
| 10336 |
abspos=0.5, compname=Cpl](A)(B)(C)(D) |
| 10337 |
\optfiber[compname=Hnlf, abspos=1](C)(C|A) |
| 10338 |
\optamp[abspos=2, compname=Amp](D|B)(D) |
| 10339 |
\drawfiber{Cpl}{Hnlf} |
| 10340 |
\drawfiber[startnode=1, ncurv=1.2]{Hnlf}{Amp} |
| 10341 |
\drawfiber{Cpl}{Amp} |
| 10342 |
\end{pspicture} |
| 10343 |
\end{LTXexample} |
| 10344 |
% \iffalse |
| 10345 |
%</ignore> |
| 10346 |
% \fi |
| 10347 |
% \end{enumerate} |
| 10348 |
% |
| 10349 |
% \ifENGLISH\subsection{Fiber appearance}\fi |
| 10350 |
% \ifGERMAN\subsection{Faseraussehen}\fi |
| 10351 |
% \label{sec:fiberappearance} |
| 10352 |
% |
| 10353 |
% \begin{stylelist} |
| 10354 |
% \styleitem{Fiber} |
| 10355 |
% \ifENGLISH |
| 10356 |
% The appearance of fibers is controlled with this style. The optional |
| 10357 |
% argument of \Lcs{drawfiber} can be used as well, these options can overwrite |
| 10358 |
% settings from the \Lstyle{Fiber} style. |
| 10359 |
% \fi |
| 10360 |
% \ifGERMAN |
| 10361 |
% Das Aussehen der Fasern wird durch diesen Stil vorgegeben. Das optionale |
| 10362 |
% Argument von \Lcs{drawfiber} kann ebenfalls verwendet werden, die |
| 10363 |
% entsprechenden Parameter können die Einstellungen von \Lstyle{Fiber} |
| 10364 |
% überschreiben. |
| 10365 |
% \fi |
| 10366 |
% \end{stylelist} |
| 10367 |
% \begin{optionlist} |
| 10368 |
% \valitem{addtoFiber}{list} |
| 10369 |
% \addtostylemsg{Fiber} |
| 10370 |
% \ifGERMAN Siehe z.B. \prettyref{ex:recirc-loop}.\fi |
| 10371 |
% \ifENGLISH See for example \prettyref{ex:recirc-loop}.\fi |
| 10372 |
% |
| 10373 |
% \valitem{newFiber}{list} |
| 10374 |
% \newstylemsg{Fiber} |
| 10375 |
% |
| 10376 |
% \valitem[curve]{fiberstyle}{string} |
| 10377 |
% \ifGERMAN |
| 10378 |
% Die Fasern werden in der Regel als \Lcs*{nccurve} gezeichnet, aber eine |
| 10379 |
% beliebige andere Knotenverbindung \nxLcs{nc}\prm{string} des |
| 10380 |
% \LPack{pst-node} Paketes kann ausgewählt werden, lesen Sie die entsprechende |
| 10381 |
% Dokumentation\fnurl{http://mirror.ctan.org/help/Catalogue/entries/pst-node.html} |
| 10382 |
% für mögliche Werte. In den folgenden Beispielen werden |
| 10383 |
% Anwendungsmöglichkeiten gezeigt, eine weitere ist in |
| 10384 |
% \prettyref{ex:transmission-loop} zu sehen. |
| 10385 |
% \fi |
| 10386 |
% \ifENGLISH |
| 10387 |
% The fibers are usually drawn as \Lcs*{nccurve}, but any type of node |
| 10388 |
% connection \nxLcs{nc}\prm{string} from \LPack{pst-node} can be selected with |
| 10389 |
% this parameter, see the \LPack{pst-node} |
| 10390 |
% documentation\fnurl{http://mirror.ctan.org/help/Catalogue/entries/pst-node.html} |
| 10391 |
% for possible values. The following examples show possible use cases, |
| 10392 |
% \prettyref{ex:transmission-loop} contains another typical use case. |
| 10393 |
% \fi |
| 10394 |
% \iffalse |
| 10395 |
%<*ignore> |
| 10396 |
% \fi |
| 10397 |
\begin{LTXexample}[morekeywords={[21]fiberstyle}] |
| 10398 |
\begin{pspicture}(3,3) |
| 10399 |
\pnodes(1, 0.5){A}(2.5,0.5){B}(2.5,2){C} |
| 10400 |
\psset{optboxsize=1 0.6, innerlabel} |
| 10401 |
\optbox[position=start](A)(B){start} |
| 10402 |
\optbox[position=end](B)(C){stop} |
| 10403 |
\drawfiber[fiberstyle=diag, linearc=0.5]{1}{2} |
| 10404 |
\end{pspicture} |
| 10405 |
\end{LTXexample} |
| 10406 |
|
| 10407 |
\begin{LTXexample}[morekeywords={[21]fiberstyle}, label={ex:recirc-loop}, caption={caption}] |
| 10408 |
\begin{pspicture}(4,2.5) |
| 10409 |
\pnodes(1,2.5){In}(3,2.5){Out}(0,2){A}(4,2){B}(4,0){C}(0,0){D} |
| 10410 |
\optcoupler[fiber=t, addtoFiber={ArrowInside=->}, coupleralign=b](In)(A)(Out)(B) |
| 10411 |
\psset{fiber=none} |
| 10412 |
\optamp[position=0.35](C)(D) |
| 10413 |
\optfiber[position=0.35](D)(C) |
| 10414 |
\drawfiber{2}{3} |
| 10415 |
\addtopsstyle{Fiber}{fiberstyle=bar, linearc=0.5, armA=1.5} |
| 10416 |
\drawfiber[stopnode=1]{1}{2} |
| 10417 |
\drawfiber[stopnode=1]{1}{3} |
| 10418 |
\end{pspicture} |
| 10419 |
\end{LTXexample} |
| 10420 |
% \iffalse |
| 10421 |
%</ignore> |
| 10422 |
% \fi |
| 10423 |
% \end{optionlist} |
| 10424 |
% |
| 10425 |
% \ifGERMAN\section{Elektrische Verbindungen}\fi |
| 10426 |
% \ifENGLISH\section{Drawing wires}\fi |
| 10427 |
% \label{sec:drawwire} |
| 10428 |
% |
| 10429 |
% \ifENGLISH |
| 10430 |
% All available components can be connected with wire connections, the |
| 10431 |
% wire components in \prettyref{chap:electrcomp} are connected |
| 10432 |
% automatically. The \Lkeyword*{wire*} parameters are equivalent to |
| 10433 |
% their \Lkeyword*{fiber*} counterparts, see their respective |
| 10434 |
% documentation for details. |
| 10435 |
% \fi |
| 10436 |
% \ifGERMAN |
| 10437 |
% Alle Komponenten können mit Drähten verbunden werden, die elektrischen |
| 10438 |
% Komponenten in \prettyref{chap:electrcomp} werden automatisch |
| 10439 |
% verbunden. Die \Lkeyword*{wire*}-Parameter sind äquivalent zu den |
| 10440 |
% entsprechenden \Lkeyword*{fiber*}-Parametern, die detailliertere |
| 10441 |
% Informationen enthalten. |
| 10442 |
% \fi |
| 10443 |
% |
| 10444 |
% \begin{ltxsyntax} |
| 10445 |
% \xLcs{drawwire}\cmditem{drawwire}[options]{obj$_1$}{obj$_2$}\ldots |
| 10446 |
% \end{ltxsyntax} |
| 10447 |
% \ifENGLISH |
| 10448 |
% This command can take a variable number of arguments (minimum of |
| 10449 |
% two) which can be either an ID, an ID range, a \Lkeyword{compname}, |
| 10450 |
% or a PSTricks nodes (see \prettyref{sec:accessobj}). To distinguish |
| 10451 |
% between nodes and components, nodes must be either enclosed in |
| 10452 |
% parenthesis within the brackets, or enclosed only in parenthesis: |
| 10453 |
% \Lcs{drawwire}\opt{\{(node)\}\{comp\}}, or |
| 10454 |
% \Lcs{drawwire}\opt{(node)\{comp\}}. If you specify more than two |
| 10455 |
% arguments, you get connections $1\rightarrow 2$, $2\rightarrow 3$, |
| 10456 |
% and so on. |
| 10457 |
% |
| 10458 |
% The automatic connections are drawn internally with |
| 10459 |
% \Lcs{drawwire} commands from each reference node to the component. |
| 10460 |
% \fi |
| 10461 |
% \ifGERMAN |
| 10462 |
% Dieses Makro akzeptiert eine variable Anzahl an Argumenten |
| 10463 |
% (mindestens zwei), die entweder eine ID, ein ID-Intervall, ein |
| 10464 |
% \Lkeyword{compname} oder ein PSTricks-Knoten sein können (siehe |
| 10465 |
% \prettyref{sec:accessobj}. Um zwischen Knoten und Komponenten |
| 10466 |
% unterscheiden zu können, müssen Knoten entweder in runde Klammern |
| 10467 |
% innerhalb der geschweiften Klammern eingeschlossen werden oder |
| 10468 |
% dürfen nur runde Klammern haben: |
| 10469 |
% \Lcs{drawbeam}\opt{\{(node)\}\{comp\}}, oder |
| 10470 |
% \Lcs{drawbeam}\opt{(node)\{comp\}}. Werden mehr als zwei Argumente |
| 10471 |
% mitgegeben, werden die Verbindungen $1\rightarrow 2$, $2\rightarrow |
| 10472 |
% 3$, usw. gezeichnet. |
| 10473 |
% |
| 10474 |
% Die automatischen Verbindungen werden intern als |
| 10475 |
% \Lcs{drawwire} von den Referenzknoten zur Komponente gezeichnet. |
| 10476 |
% \fi |
| 10477 |
% |
| 10478 |
% \begin{optionlist} |
| 10479 |
% \choitem[relative]{wirealign}{rel,relative,center,abs,absolute} |
| 10480 |
% \ifGERMAN Siehe \Lkeyword{fiberalign}.\fi |
| 10481 |
% \ifENGLISH See \Lkeyword{fiberalign}.\fi |
| 10482 |
% |
| 10483 |
% \numitem[0]{wireangleA} |
| 10484 |
% \ifGERMAN Siehe \Lkeyword{fiberangleA}.\fi |
| 10485 |
% \ifENGLISH See \Lkeyword{fiberangleA}.\fi |
| 10486 |
% |
| 10487 |
% \numitem[0]{wireangleB} |
| 10488 |
% \ifGERMAN Siehe \Lkeyword{fiberangleB}.\fi |
| 10489 |
% \ifENGLISH See \Lkeyword{fiberangleB}.\fi |
| 10490 |
% |
| 10491 |
% \valitem[angle]{wirestyle}{string} |
| 10492 |
% \ifGERMAN Siehe \Lkeyword{fiberstyle}, der Vorgabewert ist jedoch \opt{angle}.\fi |
| 10493 |
% \ifENGLISH See \Lkeyword{fiberstyle}, the default value is \opt{angle}.\fi |
| 10494 |
% |
| 10495 |
% \valitem{addtoWire}{list} |
| 10496 |
% \addtostylemsg{Wire} |
| 10497 |
% |
| 10498 |
% \valitem{newWire}{list} |
| 10499 |
% \newstylemsg{Wire} |
| 10500 |
% \end{optionlist} |
| 10501 |
% \begin{stylelist} |
| 10502 |
% \styleitem{Wire} |
| 10503 |
% \ifENGLISH |
| 10504 |
% The appearance of wires is controlled with this style, compare with |
| 10505 |
% \prettyref{sec:fiberappearance}. The optional argument of |
| 10506 |
% \Lcs{drawwire} can be used as well, these options can overwrite |
| 10507 |
% settings from the \Lstyle{Wire} style. |
| 10508 |
% \fi |
| 10509 |
% \ifGERMAN |
| 10510 |
% Das Aussehen der elektrischen Verbindungen wird durch diesen Stil |
| 10511 |
% vorgegeben, analog zu \prettyref{sec:fiberappearance}. Das optionale |
| 10512 |
% Argument von \Lcs{drawwire} kann ebenfalls verwendet werden, die |
| 10513 |
% entsprechenden Parameter können die Einstellungen von \Lstyle{Wire} |
| 10514 |
% überschreiben. |
| 10515 |
% \fi |
| 10516 |
% \end{stylelist} |
| 10517 |
% |
| 10518 |
% \ifENGLISH\section{Automatic fiber and wire connections}\fi |
| 10519 |
% \ifGERMAN\section{Automatische Faser- und Drahtverbindungen}\fi |
| 10520 |
% \label{sec:drawconn-auto} |
| 10521 |
% |
| 10522 |
% \ifENGLISH |
| 10523 |
% All fiber components described in \prettyref{chap:fibercomp} are |
| 10524 |
% connected automatically to their reference nodes with \Lcs{drawfiber}, |
| 10525 |
% their behaviour is descibed in \prettyref{sec:drawfiber-angles}. The |
| 10526 |
% electrical components (\prettyref{chap:electrcomp}) are accordingly |
| 10527 |
% connected with \Lcs{drawwire}. The connections can also be controlled |
| 10528 |
% in a number of ways, without explicitely using these macros. The style |
| 10529 |
% of each connection can be configure independently, see |
| 10530 |
% \prettyref{sec:drawconn-auto-styles}. |
| 10531 |
% \fi |
| 10532 |
% \ifGERMAN |
| 10533 |
% Alle Faserkomponenten, die in \prettyref{chap:fibercomp} beschrieben |
| 10534 |
% werden, werden automatisch über \Lcs{drawfiber} mit ihren |
| 10535 |
% Referenzknoten verbunden, das Verhalten ist in |
| 10536 |
% \prettyref{sec:drawfiber-angles} beschrieben. Entsprechend dazu werden |
| 10537 |
% die elektrischen Komponenten (\prettyref{chap:electrcomp}) mit |
| 10538 |
% \Lcs{drawwire} mit Drähten verbunden. Die automatischen Verbindungen |
| 10539 |
% können umfangreich kontrolliert werden, ohne diese Makros explizit zu |
| 10540 |
% verwenden. Das Aussehen jeder Verbindung kann ebenfalls separat |
| 10541 |
% konfiguriert werden, siehe \prettyref{sec:drawconn-auto-styles}. |
| 10542 |
% \fi |
| 10543 |
% |
| 10544 |
% \begin{optionlist} |
| 10545 |
% \choitem[all]{fiber}{[*+]none,all,i,o,\prm{refpoint}} |
| 10546 |
% \ifENGLISH This parameter selects which fiber connections are drawn. |
| 10547 |
% The value of this parameter can affect either only the fiber |
| 10548 |
% components (if the value is prefixed with \opt{*}), only free-ray |
| 10549 |
% and electrical components (prefixed with \opt{+}), or all component types |
| 10550 |
% otherwise. Typical free-ray components which are often used with |
| 10551 |
% fibers as well are \Lcomp{optbox} and \Lcomp{optdetector}. Please |
| 10552 |
% note, that electrical components cannot be connected automatically |
| 10553 |
% with fibers, in these cases you must use \Lcs{drawfiber} |
| 10554 |
% explicitely. |
| 10555 |
% |
| 10556 |
% You can select to connect \opt{all} nodes, \opt{none}, or select distinct |
| 10557 |
% connections to draw. Value \opt{i} (\opt{l} is equivalent) draws all input |
| 10558 |
% fibers, \opt{o} (\opt{r} is equivalent) draws all output fibers. These |
| 10559 |
% values are exclusive, that means \opt{io} does not select all fibers, but |
| 10560 |
% none. |
| 10561 |
% |
| 10562 |
% Components which have more than one input or output fiber |
| 10563 |
% (\hyperref[sec:coupler]{couplers} and \Lcomp{optcirculator}) allow also |
| 10564 |
% values \opt{t} and \opt{b}, possibly in combination with \opt{i}, \opt{o}, |
| 10565 |
% \opt{r}, or \opt{l}. |
| 10566 |
% |
| 10567 |
% See the following examples for some variants. |
| 10568 |
% \fi |
| 10569 |
% \ifGERMAN |
| 10570 |
% Dieser Parameter gibt an, welche Faserverbindungen gezeichnet |
| 10571 |
% werden. Der Parameter kann nur die Faserkomponenten betreffen (falls |
| 10572 |
% ein \opt{*} vorangestellt ist), nur die elektrischen und |
| 10573 |
% Freistrahlkomponenten (\opt{+} wird vorangestellt), oder alle |
| 10574 |
% Komponententypen. Typische Freistrahlkomponenten, die häufig als |
| 10575 |
% Faserkomponenten verwendet werden, sind \Lcomp{optbox} und |
| 10576 |
% \Lcomp{optdetector}. Beachten Sie, dass elektrische Komponenten |
| 10577 |
% nicht automatisch mit Fasern verbunden werden können, Sie müssen |
| 10578 |
% dann explizit \Lcs{drawfiber} verwenden. |
| 10579 |
% |
| 10580 |
% Es können alle Verbindungen gezeichnet werden (\opt{all}), keine |
| 10581 |
% (\opt{none}), oder es können bestimmte ausgewählt werden. Die Werte \opt{i} |
| 10582 |
% (\opt{l} ist äquivalent) zeichnet nur die Eingangsfasern, \opt{o} |
| 10583 |
% (bzw. \opt{r}) alle ausgehenden Fasern. Diese Angaben sind ausschließend, |
| 10584 |
% d.h. mit \opt{io} werden gar keine Verbindungen gezeichnet. |
| 10585 |
% |
| 10586 |
% Komponenten, die über mehr als einen Eingang oder Ausgang verfügen |
| 10587 |
% (\hyperref[sec:coupler]{Koppler} und \Lcomp{optcirculator}) erlauben |
| 10588 |
% weitergehende Auswahl mit \opt{t} und \opt{b}, möglicherweise in Verbindung |
| 10589 |
% mit \opt{i}, \opt{o}, \opt{l} und \opt{r}. |
| 10590 |
% |
| 10591 |
% Die folgenden Beispiele zeigen einige Möglichkeiten. |
| 10592 |
% \fi |
| 10593 |
% \end{optionlist} |
| 10594 |
% |
| 10595 |
% \begin{enumerate} |
| 10596 |
% \item |
| 10597 |
% \ifENGLISH Enable all fiber connections all components.\fi |
| 10598 |
% \ifGERMAN Zeichne alle Fasern für alle Komponenten.\fi |
| 10599 |
% |
| 10600 |
% \iffalse |
| 10601 |
%<*ignore> |
| 10602 |
% \fi |
| 10603 |
\begin{LTXexample}[morekeywords={[21]{fiber}}] |
| 10604 |
\begin{pspicture}(3,3) |
| 10605 |
\psset{fiber} |
| 10606 |
\optbox(0,2.5)(3,2.5) |
| 10607 |
\optmzm(0,1.5)(3,1.5) |
| 10608 |
\elecsynthesizer[position=0.5](0,0.5)(3,0.5) |
| 10609 |
\end{pspicture} |
| 10610 |
\end{LTXexample} |
| 10611 |
% \iffalse |
| 10612 |
%</ignore> |
| 10613 |
% \fi |
| 10614 |
% |
| 10615 |
% \item |
| 10616 |
% \ifENGLISH Draw only the input fiber of a fiber component (\Lcomp{optmzm}), |
| 10617 |
% the other components are not affected. |
| 10618 |
% \fi |
| 10619 |
% \ifGERMAN Nur die Eingangsverbindung einer Faserkomponente (\Lcomp{optmzm}) |
| 10620 |
% wird gezeichnet, die anderen Komponenten bleiben unbeeinflusst. |
| 10621 |
% \fi |
| 10622 |
% |
| 10623 |
% \iffalse |
| 10624 |
%<*ignore> |
| 10625 |
% \fi |
| 10626 |
\begin{LTXexample}[morekeywords={[21]{fiber}}] |
| 10627 |
\begin{pspicture}(3,3) |
| 10628 |
\psset{fiber=*i} |
| 10629 |
\optbox(0,2.5)(3,2.5) |
| 10630 |
\optmzm(0,1.5)(3,1.5) |
| 10631 |
\elecsynthesizer[position=0.5](1,0.5)(3,0.5) |
| 10632 |
\end{pspicture} |
| 10633 |
\end{LTXexample} |
| 10634 |
% \iffalse |
| 10635 |
%</ignore> |
| 10636 |
% \fi |
| 10637 |
% |
| 10638 |
% \item |
| 10639 |
% \ifENGLISH All connections of the fiber component are drawn, the |
| 10640 |
% other components get only the output fiber. |
| 10641 |
% \fi |
| 10642 |
% \ifGERMAN Von der Faserkomponente werden alle Verbindungen |
| 10643 |
% gezeichnet, die anderen Komponenten erhalten nur eine |
| 10644 |
% Ausgangsverbindung. |
| 10645 |
% \fi |
| 10646 |
% |
| 10647 |
% \iffalse |
| 10648 |
%<*ignore> |
| 10649 |
% \fi |
| 10650 |
\begin{LTXexample}[morekeywords={[21]{fiber}}] |
| 10651 |
\begin{pspicture}(3,3) |
| 10652 |
\psset{fiber=+o} |
| 10653 |
\optbox(0,2.5)(3,2.5) |
| 10654 |
\optmzm(0,1.5)(3,1.5) |
| 10655 |
\elecsynthesizer[position=0.5](1,0.5)(3,0.5) |
| 10656 |
\end{pspicture} |
| 10657 |
\end{LTXexample} |
| 10658 |
% \iffalse |
| 10659 |
%</ignore> |
| 10660 |
% \fi |
| 10661 |
% |
| 10662 |
% \item |
| 10663 |
% \ifENGLISH The values \opt{t} and \opt{b} affect only components which have |
| 10664 |
% more than two fibers, i.e \Lcomp{optcirculator} and the couplers |
| 10665 |
% (\prettyref{sec:coupler}). |
| 10666 |
% \fi |
| 10667 |
% \ifGERMAN |
| 10668 |
% Die Werte \opt{t} und \opt{b} betreffen nur die Komponenten mit mehr als |
| 10669 |
% zwei Verbindungen, also \Lcomp{optcirculator} und die Koppler |
| 10670 |
% (\prettyref{sec:coupler}). |
| 10671 |
% \fi |
| 10672 |
% |
| 10673 |
% \iffalse |
| 10674 |
%<*ignore> |
| 10675 |
% \fi |
| 10676 |
\begin{LTXexample}[morekeywords={[21]{fiber}}] |
| 10677 |
\begin{pspicture}(3,1) |
| 10678 |
\optcoupler[fiber=t](0,1)(0,0)(3,1)(3,0) |
| 10679 |
\end{pspicture} |
| 10680 |
\end{LTXexample} |
| 10681 |
\begin{LTXexample}[morekeywords={[21]{fiber}}] |
| 10682 |
\begin{pspicture}(3,1) |
| 10683 |
\wdmsplitter[fiber=br](0,0.5)(3,1)(3,0) |
| 10684 |
\end{pspicture} |
| 10685 |
\end{LTXexample} |
| 10686 |
\begin{LTXexample}[morekeywords={[21]{fiber}}] |
| 10687 |
\begin{pspicture}(3,1) |
| 10688 |
\optcirculator[fiber=b](0,0.5)(3,1)(1,0) |
| 10689 |
\end{pspicture} |
| 10690 |
\end{LTXexample} |
| 10691 |
% \iffalse |
| 10692 |
%</ignore> |
| 10693 |
% \fi |
| 10694 |
% \end{enumerate} |
| 10695 |
% |
| 10696 |
% \begin{optionlist} |
| 10697 |
% \choitem[all]{wire}{[*+]none,all,i,o,\prm{refpoint}} |
| 10698 |
% \ifENGLISH |
| 10699 |
% This parameter selects which wire connections are drawn. The value |
| 10700 |
% of this parameter can affect either only the electrical components |
| 10701 |
% (if the value is prefixed with \opt{*}), only free-ray and fiber |
| 10702 |
% components (prefixed with \opt{+}), or all components otherwise. |
| 10703 |
% \fi |
| 10704 |
% \ifGERMAN |
| 10705 |
% Dieser Parameter gibt an, welche elektrische Verbindungen gezeichnet |
| 10706 |
% werden. Der Parameter kann nur die elektrischen Komponenten |
| 10707 |
% betreffen (falls ein \opt{*} vorangestellt ist), nur die Faser- und |
| 10708 |
% Freistrahlkomponenten (\opt{+} wird vorangestellt), oder alle |
| 10709 |
% Komponenten. |
| 10710 |
% \fi |
| 10711 |
% \end{optionlist} |
| 10712 |
% \begin{enumerate} |
| 10713 |
% \item |
| 10714 |
% \ifENGLISH Enable all wire connections for all components.\fi |
| 10715 |
% \ifGERMAN Zeichne alle Drähte aller Komponenten.\fi |
| 10716 |
% |
| 10717 |
% \iffalse |
| 10718 |
%<*ignore> |
| 10719 |
% \fi |
| 10720 |
\begin{LTXexample}[morekeywords={[21]{wire}}] |
| 10721 |
\begin{pspicture}(3,3) |
| 10722 |
\psset{wire} |
| 10723 |
\optbox(0,2.5)(3,2.5) |
| 10724 |
\optmzm(0,1.5)(3,1.5) |
| 10725 |
\elecsynthesizer[position=0.5](0,0.5)(3,0.5) |
| 10726 |
\end{pspicture} |
| 10727 |
\end{LTXexample} |
| 10728 |
% \iffalse |
| 10729 |
%</ignore> |
| 10730 |
% \fi |
| 10731 |
% |
| 10732 |
% \item |
| 10733 |
% \ifENGLISH Draw only the input wire of an electrical component |
| 10734 |
% (\Lcomp{elecsynthesizer}), the other components are not affected. |
| 10735 |
% \fi |
| 10736 |
% \ifGERMAN Nur die Eingangsverbindung einer elektrischen Komponente |
| 10737 |
% (\Lcomp{elecsynthesizer}) wird gezeichnet, die anderen Komponenten |
| 10738 |
% bleiben unbeeinflusst. |
| 10739 |
% \fi |
| 10740 |
% |
| 10741 |
% \iffalse |
| 10742 |
%<*ignore> |
| 10743 |
% \fi |
| 10744 |
\begin{LTXexample}[morekeywords={[21]{wire}}] |
| 10745 |
\begin{pspicture}(3,3) |
| 10746 |
\psset{wire=*i} |
| 10747 |
\optbox(0,2.5)(3,2.5) |
| 10748 |
\optmzm(0,1.5)(3,1.5) |
| 10749 |
\elecsynthesizer[position=0.5](0,0.5)(3,0.5) |
| 10750 |
\end{pspicture} |
| 10751 |
\end{LTXexample} |
| 10752 |
% \iffalse |
| 10753 |
%</ignore> |
| 10754 |
% \fi |
| 10755 |
% |
| 10756 |
% \item |
| 10757 |
% \ifENGLISH Draw only the output wire of the free-ray and fiber |
| 10758 |
% components, but all connections of the wire component. |
| 10759 |
% \fi |
| 10760 |
% \ifGERMAN Von der Freistrahl- und Faserkomponente wird nur die Ausgangsverbindung |
| 10761 |
% gezeichnet, die elektrischen Komponente erhält jedoch alle Verbindungen. |
| 10762 |
% \fi |
| 10763 |
% |
| 10764 |
% \iffalse |
| 10765 |
%<*ignore> |
| 10766 |
% \fi |
| 10767 |
\begin{LTXexample}[morekeywords={[21]{wire}}] |
| 10768 |
\begin{pspicture}(3,3) |
| 10769 |
\psset{wire=+o} |
| 10770 |
\optbox(0,2.5)(3,2.5) |
| 10771 |
\optmzm(0,1.5)(3,1.5) |
| 10772 |
\elecsynthesizer[position=0.5](0,0.5)(3,0.5) |
| 10773 |
\end{pspicture} |
| 10774 |
\end{LTXexample} |
| 10775 |
% \iffalse |
| 10776 |
%</ignore> |
| 10777 |
% \fi |
| 10778 |
% |
| 10779 |
% \item |
| 10780 |
% \ifENGLISH The values \opt{t} and \opt{b} affect only components which have |
| 10781 |
% more than two connections, i.e \Lcomp{elecmixer} and \Lcomp{eleccoupler}. |
| 10782 |
% \fi |
| 10783 |
% \ifGERMAN |
| 10784 |
% Die Werte \opt{t} und \opt{b} betreffen nur die Komponenten mit mehr als |
| 10785 |
% zwei Verbindungen, also \Lcomp{elecmixer} und \Lcomp{eleccoupler}. |
| 10786 |
% \fi |
| 10787 |
% |
| 10788 |
% \iffalse |
| 10789 |
%<*ignore> |
| 10790 |
% \fi |
| 10791 |
\begin{LTXexample}[morekeywords={[21]{wire}}] |
| 10792 |
\begin{pspicture}(3,1) |
| 10793 |
\eleccoupler[wire=t](0,1)(0,0)(3,1)(3,0) |
| 10794 |
\end{pspicture} |
| 10795 |
\end{LTXexample} |
| 10796 |
\begin{LTXexample}[morekeywords={[21]{wire}}] |
| 10797 |
\begin{pspicture}(3,1.5) |
| 10798 |
\elecmixer[wire=b](0,1)(3,1)(1,0) |
| 10799 |
\end{pspicture} |
| 10800 |
\end{LTXexample} |
| 10801 |
% \iffalse |
| 10802 |
%</ignore> |
| 10803 |
% \fi |
| 10804 |
% \end{enumerate} |
| 10805 |
% |
| 10806 |
% |
| 10807 |
% \ifENGLISH\subsection{Appearance of automatic connections}\fi |
| 10808 |
% \ifGERMAN\subsection{Aussehen der automatischen Verbindungen}\fi |
| 10809 |
% \label{sec:drawconn-auto-styles} |
| 10810 |
% |
| 10811 |
% \begin{figure}\centering |
| 10812 |
% \begin{pspicture}(0,-0.2)(12,4.4) |
| 10813 |
% \rput[lt](0,4.4){% |
| 10814 |
% \pstree[levelsep=1.5cm, treesep=0.6, |
| 10815 |
% nodesep=4pt, arrows=<-, |
| 10816 |
% arrowinset=0, arrowscale=1.5]{\poeTR{Fiber}}{% |
| 10817 |
% \pstree{\poeTR{FiberIn}}{% |
| 10818 |
% \poeTR{FiberIn1} \poeTR{FiberIn2}% |
| 10819 |
% }% |
| 10820 |
% \pstree{\poeTR{FiberOut}}{% |
| 10821 |
% \poeTR{FiberOut1} \poeTR{FiberOut2}% |
| 10822 |
% }% |
| 10823 |
% }% |
| 10824 |
% \rput[l](-1,0|T-0){\ifGERMAN Grundstil\fi\ifENGLISH parent style\fi} |
| 10825 |
% \rput[l](-1,0|T-0-0){% |
| 10826 |
% \ifGERMAN |
| 10827 |
% \parbox{\widthof{ausgehende Fasern}}{% |
| 10828 |
% \RaggedRight eingehende und ausgehende Fasern}% |
| 10829 |
% \fi |
| 10830 |
% \ifENGLISH |
| 10831 |
% \parbox{\widthof{outgoing fibers}}{% |
| 10832 |
% \RaggedRight incoming and outgoing fibers}% |
| 10833 |
% \fi |
| 10834 |
% } |
| 10835 |
% \rput[t](! \psGetNodeCenter{T-0-0-0} \psGetNodeCenter{T-0-0-1} |
| 10836 |
% T-0-0-0.x T-0-0-1.x add 2 div T-0-0-0.y 0.4 sub){% |
| 10837 |
% \ifGERMAN |
| 10838 |
% \parbox{\widthof{Obere(1) oder untere(2)}}{% |
| 10839 |
% \RaggedRight Obere(1) oder untere(2) eingehende Faser.}% |
| 10840 |
% \fi |
| 10841 |
% \ifENGLISH |
| 10842 |
% \parbox{\widthof{Upper(1) or lower(2)}}{% |
| 10843 |
% \RaggedRight Upper(1) or lower(2) incoming fiber.}% |
| 10844 |
% \fi |
| 10845 |
% } |
| 10846 |
% \rput[t](! \psGetNodeCenter{T-0-1-0} \psGetNodeCenter{T-0-1-1} |
| 10847 |
% T-0-1-0.x T-0-1-1.x add 2 div T-0-1-0.y 0.4 sub){% |
| 10848 |
% \ifGERMAN |
| 10849 |
% \parbox{\widthof{Obere(1) oder untere(2)}}{% |
| 10850 |
% \RaggedRight Obere(1) oder untere(2) ausgehende Faser.}% |
| 10851 |
% \fi |
| 10852 |
% \ifENGLISH |
| 10853 |
% \parbox{\widthof{Upper(1) or lower(2)}}{% |
| 10854 |
% \RaggedRight Upper(1) or lower(2) outgoing fiber.}% |
| 10855 |
% \fi |
| 10856 |
% } |
| 10857 |
% }% |
| 10858 |
% \end{pspicture} |
| 10859 |
% \ifGERMAN |
| 10860 |
% \caption{Vererbungsdiagramm der PS-Stile für die automatischen |
| 10861 |
% Faserverbindungen. Sie sollten diese Stile mit \protect\Lcs*{addtopsstyle} |
| 10862 |
% oder den entsprechenden \opt{addto}\prm{style} Parametern ändern um die |
| 10863 |
% Vererbungslinie beizubehalten. Eine identisches Vererbungsdiagramm besteht |
| 10864 |
% für die entsprechenden \opt{Wire\ldots} Stile.}% |
| 10865 |
% \fi \ifENGLISH |
| 10866 |
% \caption{Inheritance diagram for the psstyles used for the automatic fiber |
| 10867 |
% connections. These styles should be changed with \protect\Lcs*{addtopsstyle} |
| 10868 |
% or the respective \opt{addto}\prm{style} options to preserve the |
| 10869 |
% inheritance. An identical inheritance tree applies to the respective |
| 10870 |
% \opt{Wire\ldots} styles.}% |
| 10871 |
% \fi |
| 10872 |
% \label{fig:fiberstyles} |
| 10873 |
% \end{figure} |
| 10874 |
% |
| 10875 |
% \ifENGLISH |
| 10876 |
% The styles of all automatic fiber connections can be configured independently, |
| 10877 |
% they are all derived from the basic \Lstyle{Fiber} style which is described in |
| 10878 |
% \prettyref{sec:fiberappearance}. |
| 10879 |
% \fi |
| 10880 |
% \ifGERMAN |
| 10881 |
% Die Stile aller automatischen Faserverbindungen können separat konfiguriert |
| 10882 |
% werden, der zugrundeliegende Stil ist immer \Lstyle{Fiber}, der in |
| 10883 |
% \prettyref{sec:fiberappearance} beschrieben ist. |
| 10884 |
% \fi |
| 10885 |
% |
| 10886 |
% \begin{stylelist} |
| 10887 |
% \item[\smash{% |
| 10888 |
% \begin{tabular}[t]{@{}r@{}}% |
| 10889 |
% \opt{FiberIn}\\ |
| 10890 |
% \opt{FiberIn1}\\ |
| 10891 |
% \opt{FiberIn2}\\ |
| 10892 |
% \opt{FiberOut}\\ |
| 10893 |
% \opt{FiberOut1}\\ |
| 10894 |
% \opt{FiberOut2} |
| 10895 |
% \end{tabular}}% |
| 10896 |
% ]% |
| 10897 |
% \xLstyle{FiberIn}\label{sty:FiberIn}% |
| 10898 |
% \xLstyle{FiberIn1}\label{sty:FiberIn1}% |
| 10899 |
% \xLstyle{FiberIn2}\label{sty:FiberIn2}% |
| 10900 |
% \xLstyle{FiberOut}\label{sty:FiberOut}% |
| 10901 |
% \xLstyle{FiberOut1}\label{sty:FiberOut1}% |
| 10902 |
% \xLstyle{FiberOut2}\label{sty:FiberOut2}% |
| 10903 |
% \ifENGLISH |
| 10904 |
% Style \Lstyle{FiberIn} applies to all input fibers, it inherits from |
| 10905 |
% \Lstyle{Fiber}. If the component has more than one input fiber they use the |
| 10906 |
% styles \Lstyle{FiberIn1} and \Lstyle{FiberIn2} which inherit from |
| 10907 |
% \Lstyle{FiberIn}. All output fibers use the style \Lstyle{FiberOut}, in case of two output fibers they use the styles \Lstyle{FiberOut1} and \Lstyle{FiberOut2} which |
| 10908 |
% inherit from \Lstyle{FiberOut}. See \prettyref{fig:fiberstyles} for an |
| 10909 |
% inheritance diagram of the styles. You must have in mind, that this |
| 10910 |
% inheritance is effective only if you use \Lcs*{addtopsstyle} to change the |
| 10911 |
% styles (see also below). |
| 10912 |
% \fi |
| 10913 |
% \ifGERMAN |
| 10914 |
% Der Stil \Lstyle{FiberIn} bezieht sich auf alle Eingangsfasern und erbt alle |
| 10915 |
% Eigenschaften von \Lstyle{Fiber}. Hat eine Komponente zwei davon, so können |
| 10916 |
% diese mit \Lstyle{FiberIn1} und \Lstyle{FiberIn2} angesprochen werden, die |
| 10917 |
% alles von \Lstyle{FiberIn} übernehmen. Entsprechend bezieht sich |
| 10918 |
% \Lstyle{FiberOut} auf alle Ausgangsfasern, falls es davon zwei gibt dann |
| 10919 |
% können diese mit \Lstyle{FiberOut1} und \Lstyle{FiberOut2} geändert |
| 10920 |
% werden. Siehe \prettyref{fig:fiberstyles} für ein Vererbungsdiagramm der |
| 10921 |
% Faserstile. Beachten Sie, dass diese Vererbung nur erhalten bleibt, falls die |
| 10922 |
% Stile nur mit \Lcs*{addtopsstyle} oder den entsprechenden |
| 10923 |
% \opt{addto}\prm{style} Parametern verändert werden. |
| 10924 |
% \fi |
| 10925 |
% \item[\smash{% |
| 10926 |
% \begin{tabular}[t]{@{}r@{}}% |
| 10927 |
% \opt{WireIn}\\ |
| 10928 |
% \opt{WireIn1}\\ |
| 10929 |
% \opt{WireIn2}\\ |
| 10930 |
% \opt{WireOut}\\ |
| 10931 |
% \opt{WireOut1}\\ |
| 10932 |
% \opt{WireOut2} |
| 10933 |
% \end{tabular}}% |
| 10934 |
% ]% |
| 10935 |
% \ifENGLISH |
| 10936 |
% Style \Lstyle{WireIn} applies to all input wires, it inherits from |
| 10937 |
% \Lstyle{Wire}. If the component has more than one input wire they use |
| 10938 |
% the styles \Lstyle{WireIn1} and \Lstyle{WireIn2} which inherit from |
| 10939 |
% \Lstyle{WireIn}. All output wires use the style \Lstyle{WireOut}, in |
| 10940 |
% case of two output wires they use the styles \Lstyle{WireOut1} and |
| 10941 |
% \Lstyle{WireOut2} which inherit from \Lstyle{WireOut}. See |
| 10942 |
% \prettyref{fig:fiberstyles} for an inheritance diagram of the |
| 10943 |
% styles. You must have in mind, that this inheritance is effective only |
| 10944 |
% if you use \Lcs*{addtopsstyle} to change the styles (see also below). |
| 10945 |
% \fi |
| 10946 |
% \ifGERMAN |
| 10947 |
% Der Stil \Lstyle{WireIn} bezieht sich auf alle eingehenden |
| 10948 |
% elektrischen Verbindungen und erbt alle Eigenschaften von |
| 10949 |
% \Lstyle{Wire}. Hat eine Komponente zwei davon, so können diese mit |
| 10950 |
% \Lstyle{WireIn1} und \Lstyle{WireIn2} angesprochen werden, die alles |
| 10951 |
% von \Lstyle{WireIn} übernehmen. Entsprechend bezieht sich |
| 10952 |
% \Lstyle{WireOut} auf alle ausgehenden elektrischen Verbindungen, falls |
| 10953 |
% es davon zwei gibt dann können diese mit \Lstyle{WireOut1} und |
| 10954 |
% \Lstyle{WireOut2} geändert werden. Siehe \prettyref{fig:fiberstyles} |
| 10955 |
% für ein Vererbungsdiagramm der Stile. Beachten Sie, dass diese |
| 10956 |
% Vererbung nur erhalten bleibt, falls die Stile nur mit |
| 10957 |
% \Lcs*{addtopsstyle} oder den entsprechenden \opt{addto}\prm{style} |
| 10958 |
% Parametern verändert werden. |
| 10959 |
% \fi |
| 10960 |
% \xLstyle{WireIn}\label{sty:WireIn}% |
| 10961 |
% \xLstyle{WireIn1}\label{sty:WireIn1}% |
| 10962 |
% \xLstyle{WireIn2}\label{sty:WireIn2}% |
| 10963 |
% \xLstyle{WireOut}\label{sty:WireOut}% |
| 10964 |
% \xLstyle{WireOut1}\label{sty:WireOut1}% |
| 10965 |
% \xLstyle{WireOut2}\label{sty:WireOut2}% |
| 10966 |
% |
| 10967 |
% \item[\smash{\begin{tabular}[t]{@{}r@{}}% |
| 10968 |
% \opt{new}\prm{style}\\ |
| 10969 |
% \opt{addto}\prm{style} |
| 10970 |
% \end{tabular}}] |
| 10971 |
% \xLkeyword{newFiberIn}\xLkeyword{addtoFiberIn}% |
| 10972 |
% \label{prm:newFiberIn}\label{prm:addtoFiberIn} |
| 10973 |
% \xLkeyword{newFiberIn1}\xLkeyword{addtoFiberIn1} |
| 10974 |
% \label{prm:newFiberIn1}\label{prm:addtoFiberIn1} |
| 10975 |
% \xLkeyword{newFiberIn2}\xLkeyword{addtoFiberIn2} |
| 10976 |
% \label{prm:newFiberIn2}\label{prm:addtoFiberIn2} |
| 10977 |
% \xLkeyword{newFiberOut}\xLkeyword{addtoFiberOut} |
| 10978 |
% \label{prm:newFiberOut}\label{prm:addtoFiberOut} |
| 10979 |
% \xLkeyword{newFiberOut1}\xLkeyword{addtoFiberOut1} |
| 10980 |
% \label{prm:newFiberOut1}\label{prm:addtoFiberOut1} |
| 10981 |
% \xLkeyword{newFiberOut2}\xLkeyword{addtoFiberOut2} |
| 10982 |
% \label{prm:newFiberOut2}\label{prm:addtoFiberOut2} |
| 10983 |
% \xLkeyword{newWireIn}\xLkeyword{addtoWireIn} |
| 10984 |
% \label{prm:newWireIn}\label{prm:addtoWireIn} |
| 10985 |
% \xLkeyword{newWireIn1}\xLkeyword{addtoWireIn1} |
| 10986 |
% \label{prm:newWireIn1}\label{prm:addtoWireIn1} |
| 10987 |
% \xLkeyword{newWireIn2}\xLkeyword{addtoWireIn2} |
| 10988 |
% \label{prm:newWireIn2}\label{prm:addtoWireIn2} |
| 10989 |
% \xLkeyword{newWireOut}\xLkeyword{addtoWireOut} |
| 10990 |
% \label{prm:newWireOut}\label{prm:addtoWireOut} |
| 10991 |
% \xLkeyword{newWireOut1}\xLkeyword{addtoWireOut1} |
| 10992 |
% \label{prm:newWireOut1}\label{prm:addtoWireOut1} |
| 10993 |
% \xLkeyword{newWireOut2}\xLkeyword{addtoWireOut2} |
| 10994 |
% \label{prm:newWireOut2}\label{prm:addtoWireOut2} |
| 10995 |
% \ifENGLISH |
| 10996 |
% For every style two appropriate keys \opt{new}\prm{style} and |
| 10997 |
% \opt{addto}\prm{style} are provided which can be used to change the |
| 10998 |
% styles for single objects. This can be used to define own components |
| 10999 |
% (\prettyref{sec:customcomp}) with respectively changed connections |
| 11000 |
% or to avoid explicit grouping. |
| 11001 |
% \fi |
| 11002 |
% \ifGERMAN |
| 11003 |
% Für jeden Faserstil werden zwei Parameter \opt{new}\prm{style} und |
| 11004 |
% \opt{addto}\prm{style} bereitgestellt, mit denen die Stile für |
| 11005 |
% einzelne Komponenten verändert werden können. Damit können neuen |
| 11006 |
% Komponenten mit anderen voreingestellten Verbindungen definiert |
| 11007 |
% werden (\prettyref{sec:customcomp}), oder explizite Gruppierung kann |
| 11008 |
% vermieden werden. |
| 11009 |
% \fi |
| 11010 |
% |
| 11011 |
% \iffalse |
| 11012 |
%<*ignore> |
| 11013 |
% \fi |
| 11014 |
\begin{LTXexample}[morekeywords={[21]{addtoFiberOut1}}] |
| 11015 |
\begin{pspicture}(3,2) |
| 11016 |
\newpsobject{tapcoupler}{wdmsplitter}{% |
| 11017 |
coupleralign=b, |
| 11018 |
addtoFiberOut1={arrows=->, arrowscale=1.2, arrowinset=0}} |
| 11019 |
\tapcoupler(0,0.5)(3,1.5)(3,0.5){99/1} |
| 11020 |
\end{pspicture} |
| 11021 |
\end{LTXexample} |
| 11022 |
% \iffalse |
| 11023 |
%</ignore> |
| 11024 |
% \fi |
| 11025 |
% \end{stylelist} |
| 11026 |
% |
| 11027 |
% |
| 11028 |
% \ifGERMAN\subsection{Bekannte Einschränkungen}\fi |
| 11029 |
% \ifENGLISH\subsection{Known limitations}\fi |
| 11030 |
% |
| 11031 |
% \ifGERMAN Die Kombination von \Lkeyword{fiber} und \Lkeyword{wire} |
| 11032 |
% erlaubt in der derzeitigen Implementierung (Version \fileversion) |
| 11033 |
% nicht die beliebige Kombination aller Parametervarianten. Die meisten |
| 11034 |
% funktionieren, aber das folgende Beispiel zeigt eine Variante, die |
| 11035 |
% nicht korrekt funktioniert (der \Lcomp{elecsynthesizer} sollte eine |
| 11036 |
% Eingangsfaser haben): |
| 11037 |
% \fi |
| 11038 |
% \ifENGLISH The combination of \Lkeyword{fiber} and \Lkeyword{wire} |
| 11039 |
% does not allow any arbitrary combination of all parameter values in |
| 11040 |
% the current implementation (version \fileversion). Most combinations |
| 11041 |
% do work, but the following examples shows a variant, which does not |
| 11042 |
% work correctly (the \Lcomp{elecsynthesizer} should have an input fiber): |
| 11043 |
% \fi |
| 11044 |
% \iffalse |
| 11045 |
%<*ignore> |
| 11046 |
% \fi |
| 11047 |
\begin{LTXexample}[morekeywords={[21]{fiber, wire}}] |
| 11048 |
\begin{pspicture}(3,3) |
| 11049 |
\psset[optexp]{fiber=i, wire=+i} |
| 11050 |
\fiberdelayline(0,2.5)(3,2.5) |
| 11051 |
\optbox(0,1.5)(3,1.5) |
| 11052 |
\elecsynthesizer[position=0.5](0,0.5)(3,0.5) |
| 11053 |
\end{pspicture} |
| 11054 |
\end{LTXexample} |
| 11055 |
% \iffalse |
| 11056 |
%</ignore> |
| 11057 |
% \fi |
| 11058 |
% |
| 11059 |
% \ifGERMAN In solchen speziellen Fällen muss auf manuelle Verbindungen |
| 11060 |
% zurückgegriffen werden. |
| 11061 |
% \fi |
| 11062 |
% \ifENGLISH In such special cases one must resort to manual |
| 11063 |
% connections. |
| 11064 |
% \fi |
| 11065 |
% |
| 11066 |
% \ifGERMAN\section{Zeichenebenen}\fi |
| 11067 |
% \ifENGLISH\section{Layers}\fi |
| 11068 |
% \label{sec:layers} |
| 11069 |
% |
| 11070 |
% \ifENGLISH |
| 11071 |
% The necessary order of constructing a drawing is to define the components |
| 11072 |
% first before you can connect them. This implies that all connections are drawn |
| 11073 |
% on top of the components, which might be unwanted. |
| 11074 |
% |
| 11075 |
% To circumvent this, we provide the \Lenv{optexp} environment, inside which all |
| 11076 |
% connections are drawn behind the components. |
| 11077 |
% \fi |
| 11078 |
% \ifGERMAN |
| 11079 |
% Die Reihenfolge der Konstruktion einer Skizze ist die, dass zuerst die |
| 11080 |
% Komponenten definiert werden müssen, bevor diese verbunden werden können. Das |
| 11081 |
% beinhaltet aber, dass alle Verbindungen über die Komponenten gezeichnet |
| 11082 |
% werden, was nicht erwünscht sein muss. |
| 11083 |
% |
| 11084 |
% Um das zu vermeiden, wird die \Lenv{optexp}-Umgebung bereitgestellt, innerhalb |
| 11085 |
% derer alle Verbindungen hinter die Komponenten gelegt werden. |
| 11086 |
% \fi |
| 11087 |
% |
| 11088 |
% \begin{ltxsyntax} |
| 11089 |
% \envitem{optexp} |
| 11090 |
% \end{ltxsyntax} |
| 11091 |
% |
| 11092 |
% \iffalse |
| 11093 |
%<*ignore> |
| 11094 |
% \fi |
| 11095 |
\ifENGLISH |
| 11096 |
\begin{LTXexample} |
| 11097 |
\begin{pspicture}(3,4) |
| 11098 |
\psset{beam, fillstyle=solid, fillcolor=black} |
| 11099 |
\optbox(0,3.5)(3,3.5){no layers} |
| 11100 |
\begin{optexp} |
| 11101 |
\optbox(0,1.5)(3,1.5){with layers} |
| 11102 |
\end{optexp} |
| 11103 |
\end{pspicture} |
| 11104 |
\end{LTXexample} |
| 11105 |
\fi |
| 11106 |
\ifGERMAN |
| 11107 |
\begin{LTXexample} |
| 11108 |
\begin{pspicture}(3,4) |
| 11109 |
\psset{beam, fillstyle=solid, fillcolor=black} |
| 11110 |
\optbox(0,3.5)(3,3.5){ohne Ebenen} |
| 11111 |
\begin{optexp} |
| 11112 |
\optbox(0,1.5)(3,1.5){mit Ebenen} |
| 11113 |
\end{optexp} |
| 11114 |
\end{pspicture} |
| 11115 |
\end{LTXexample} |
| 11116 |
\fi |
| 11117 |
% \iffalse |
| 11118 |
%</ignore> |
| 11119 |
% \fi |
| 11120 |
% |
| 11121 |
% \ifENGLISH |
| 11122 |
% Beware, that this is achieved by executing twice all code included in the |
| 11123 |
% environment. This works fine for all \LPack{pst-optexp} commands which take |
| 11124 |
% care of not drawing stuff twice but only in a changed order. All other text |
| 11125 |
% and graphics are drawn twice which leads to ugly results because of altered |
| 11126 |
% anti-aliasing in the viewer. |
| 11127 |
% |
| 11128 |
% To avoid this, you can either move all other code outside the environment, or |
| 11129 |
% use the following two commands to define code parts which are executed only |
| 11130 |
% once. |
| 11131 |
% \fi |
| 11132 |
% \ifGERMAN |
| 11133 |
% Beachten Sie, dass das erreicht wird, indem der gesamte Code innerhalb der |
| 11134 |
% Umgebung doppelt ausgeführt wird. Das funktioniert mit allen |
| 11135 |
% \LPack{pst-optexp}-Makros, da diese sich intern darum kümmern nichts doppelt |
| 11136 |
% sondern nur in geänderter Reihenfolge zu zeichnen. Alle anderen Zeichnungen |
| 11137 |
% und Texte werden zweimal gezeichnet, was zu unschönen Ergebnissen aufgrund |
| 11138 |
% von geändertem Antialiasing in dem Betrachter führen kann. |
| 11139 |
% |
| 11140 |
% Um zu verhindern, dass anderer Code doppelt ausgeführt wird, muss dieser |
| 11141 |
% entweder außerhalb der \Lenv{optexp}-Umgebung definiert werden, oder durch |
| 11142 |
% eins der beiden folgenden Makros auf eine Ebene beschränkt werden. |
| 11143 |
% \fi |
| 11144 |
% |
| 11145 |
% \begin{ltxsyntax} |
| 11146 |
% \cmditem{backlayer}{code} |
| 11147 |
% |
| 11148 |
% \ifENGLISH Execute \prm{code} only once in the first pass.\fi |
| 11149 |
% \ifGERMAN Führe \prm{code} nur beim ersten Durchgang aus.\fi |
| 11150 |
% |
| 11151 |
% \cmditem{frontlayer}{code} |
| 11152 |
% |
| 11153 |
% \ifENGLISH Execute \prm{code} only once in the second pass.\fi |
| 11154 |
% \ifGERMAN Führe \prm{code} nur beim zweiten Durchgang aus.\fi |
| 11155 |
% \end{ltxsyntax} |
| 11156 |
% |
| 11157 |
% \ifENGLISH |
| 11158 |
% In this example, the text is put on top of the frame although the text is |
| 11159 |
% defined first: |
| 11160 |
% \fi |
| 11161 |
% \ifGERMAN In diesem Beispiel wird der Text über dem Rechteck angezeigt, obwohl |
| 11162 |
% der Text zuerst definiert wird: |
| 11163 |
% \fi |
| 11164 |
% |
| 11165 |
% \iffalse |
| 11166 |
%<*ignore> |
| 11167 |
% \fi |
| 11168 |
\begin{LTXexample} |
| 11169 |
\begin{pspicture}(3,1) |
| 11170 |
\begin{optexp} |
| 11171 |
\frontlayer{\rput(1.5,0.5){front}} |
| 11172 |
\backlayer{\psframe*[linecolor=DOrange!50](1,0)(2,1)} |
| 11173 |
\end{optexp} |
| 11174 |
\end{pspicture} |
| 11175 |
\end{LTXexample} |
| 11176 |
% \iffalse |
| 11177 |
%</ignore> |
| 11178 |
% \fi |
| 11179 |
% |
| 11180 |
% |
| 11181 |
% \ifGERMAN\chapter{Benutzerdefinierte Komponenten}\fi |
| 11182 |
% \ifENGLISH\chapter{Custom components}\fi |
| 11183 |
% \label{chap:custom} |
| 11184 |
% |
| 11185 |
% \ifGERMAN |
| 11186 |
% Das \LPack{pst-optexp}-Paket stellt zwei Makros zur Verfügung um |
| 11187 |
% eigene Komponenten zu zeichnen. Diese können z.B. aus Bildern oder |
| 11188 |
% eigenen Zeichnungen bestehen. |
| 11189 |
% \fi |
| 11190 |
% \ifENGLISH |
| 11191 |
% The \nxLPack{pst-optexp} package provides two commands which can use |
| 11192 |
% anything as optical components. This includes e.g. external images or |
| 11193 |
% your own drawings. |
| 11194 |
% \fi |
| 11195 |
% |
| 11196 |
% \begin{ltxsyntax} |
| 11197 |
% \xLdipole{optdipole}% |
| 11198 |
% \compitem{optdipole}[options](in)(out){comp}{label} |
| 11199 |
% \iffalse |
| 11200 |
%<*ignore> |
| 11201 |
% \fi |
| 11202 |
\begin{LTXexample} |
| 11203 |
\begin{pspicture}(3,3) |
| 11204 |
\optdipole[labeloffset=1, beam](0,2)(3,1){% |
| 11205 |
\rput(0,0){\rule{0.5cm}{1cm}}% |
| 11206 |
}{label} |
| 11207 |
\end{pspicture} |
| 11208 |
\end{LTXexample} |
| 11209 |
% \iffalse |
| 11210 |
%</ignore> |
| 11211 |
% \fi |
| 11212 |
% |
| 11213 |
% \xLdipole{opttripole}% |
| 11214 |
% \compitem{opttripole}[options](in)(center)(out){comp}{label} |
| 11215 |
% |
| 11216 |
% \iffalse |
| 11217 |
%<*ignore> |
| 11218 |
% \fi |
| 11219 |
\begin{LTXexample} |
| 11220 |
\begin{pspicture}(3,3) |
| 11221 |
\opttripole[beam](3,1.5)(1.5,2)(0,0){% |
| 11222 |
\rput[b](0,0){text}% |
| 11223 |
}{label} |
| 11224 |
\end{pspicture} |
| 11225 |
\end{LTXexample} |
| 11226 |
% \iffalse |
| 11227 |
%</ignore> |
| 11228 |
% \fi |
| 11229 |
% \end{ltxsyntax} |
| 11230 |
% |
| 11231 |
% \ifENGLISH |
| 11232 |
% These components can also be connected with beams and fibers, but do |
| 11233 |
% not provide full access to all options. \Lcomp{opttripole} defines a |
| 11234 |
% single reflective interface, whereas \Lcomp{optdipole} can have two |
| 11235 |
% transmittive interfaces: |
| 11236 |
% \fi |
| 11237 |
% \ifGERMAN |
| 11238 |
% Diese Komponenten können sowohl mit Fasern als auch mit Strahlen |
| 11239 |
% verbunden werden, können aber nicht deren volles Potential |
| 11240 |
% ausschöpfen. \Lcomp{opttripole} definiert eine einzelne reflektive |
| 11241 |
% Grenzfläche, \Lcomp{optdipole} kann zwei transmittive Grenzflächen haben: |
| 11242 |
% \fi |
| 11243 |
% |
| 11244 |
% \begin{optionlist} |
| 11245 |
% \optitem[0 0]{optdipolesize}{\prm{width}[ \prm{height}]} |
| 11246 |
% \ifGERMAN |
| 11247 |
% Hiermit können zwei transmittierende Grenzflächen für |
| 11248 |
% \Lcomp{optdipole} definiert werden, die sich bei |
| 11249 |
% $(\pm 0.5\text{\prm{width}}, 0)$ befinden. |
| 11250 |
% \fi |
| 11251 |
% \ifENGLISH |
| 11252 |
% With this option you can define two transmittive interfaces for |
| 11253 |
% \Lcomp{optdipole}, which are placed at $(\pm 0.5\text{\prm{width}}, 0)$. |
| 11254 |
% \fi |
| 11255 |
% |
| 11256 |
% \iffalse |
| 11257 |
%<*ignore> |
| 11258 |
% \fi |
| 11259 |
\begin{LTXexample}[morekeywords={[21]optdipolesize}] |
| 11260 |
\begin{pspicture}(3,2) |
| 11261 |
\pnodes(0,1){A}(3,1){B} |
| 11262 |
\optdipole[optdipolesize=1, showifcnodes](A)(B){% |
| 11263 |
\psframe[fillstyle=solid,fillcolor=black!30](-0.5,-0.5)(-0.3,0.5) |
| 11264 |
\psframe(-0.5,-0.5)(0.5,0.5)}{label} |
| 11265 |
\drawwidebeam[beamwidth=0.3, beaminside=false](A){}(B) |
| 11266 |
\drawbeam[beaminside=false, linecolor=red](A){}(B) |
| 11267 |
\end{pspicture} |
| 11268 |
\end{LTXexample} |
| 11269 |
% \iffalse |
| 11270 |
%</ignore> |
| 11271 |
% \fi |
| 11272 |
% |
| 11273 |
% \ifGERMAN Wenn zusätzlich eine Höhe \prm{height} ungleich Null |
| 11274 |
% angegeben wird, so wird diese als Apertur für das Raytracing genommen |
| 11275 |
% (siehe \Lkeyword{useNA}). Im folgenden Beispiel ist die Höhe gleich |
| 11276 |
% \opt{0.2} und damit kleiner als der aufgeweitete Strahl der deshalb |
| 11277 |
% anders als im vorangegangenen Beispiel nicht gezeichnet wird. |
| 11278 |
% \fi |
| 11279 |
% \ifENGLISH |
| 11280 |
% If also a \prm{height} greater than zero is set, this is used as size |
| 11281 |
% of the numerical aperture for ray tracing (see \Lkeyword{useNA}). In |
| 11282 |
% the following example the height is set to \opt{0.2} which is smaller |
| 11283 |
% than the wide beam which is not drawn, in contrast to the previous |
| 11284 |
% example. |
| 11285 |
% \fi |
| 11286 |
% |
| 11287 |
% \iffalse |
| 11288 |
%<*ignore> |
| 11289 |
% \fi |
| 11290 |
\begin{LTXexample}[morekeywords={[21]optdipolesize}] |
| 11291 |
\begin{pspicture}(3,2) |
| 11292 |
\pnodes(0,1){A}(3,1){B} |
| 11293 |
\optdipole[optdipolesize=1 0.2, showifcnodes](A)(B){% |
| 11294 |
\psframe[fillstyle=solid,fillcolor=black!30](-0.5,-0.5)(-0.3,0.5) |
| 11295 |
\psframe(-0.5,-0.5)(0.5,0.5)}{label} |
| 11296 |
\drawwidebeam[beamwidth=0.3, beaminside=false](A){}(B) |
| 11297 |
\drawbeam[beaminside=false, linecolor=red](A){}(B) |
| 11298 |
\end{pspicture} |
| 11299 |
\end{LTXexample} |
| 11300 |
% \iffalse |
| 11301 |
%</ignore> |
| 11302 |
% \fi |
| 11303 |
% |
| 11304 |
% \ifGERMAN |
| 11305 |
% Weitere Beispiel sind \prettyref{ex:lclv} und |
| 11306 |
% \prettyref{ex:absspektr}. |
| 11307 |
% \fi |
| 11308 |
% \ifENGLISH |
| 11309 |
% Further examples are \prettyref{ex:lclv} and |
| 11310 |
% \prettyref{ex:absspektr}. |
| 11311 |
% \fi |
| 11312 |
% |
| 11313 |
% \optitem{optdipolecomp}{\prm{macros}} |
| 11314 |
% \ifGERMAN Mit dieser Option kann die Zeichnung einer Komponente |
| 11315 |
% definiert werden, um dann mit \Lcs*{newpsobject} basierend auf |
| 11316 |
% \Lcomp{optdipole} eine neuen Komponente zu definieren. |
| 11317 |
% \fi |
| 11318 |
% \ifENGLISH |
| 11319 |
% This option defines the drawing of a component, and can be used to |
| 11320 |
% define a new component based in \Lcomp{optdipole} with |
| 11321 |
% \Lcs*{newpsobject}. |
| 11322 |
% \fi |
| 11323 |
% |
| 11324 |
% \iffalse |
| 11325 |
%<*ignore> |
| 11326 |
% \fi |
| 11327 |
\begin{LTXexample}[morekeywords={[21]optdipolecomp}] |
| 11328 |
\begin{pspicture}(3,2) |
| 11329 |
\def\phasemodulatorcomp{% |
| 11330 |
\psframe(-1,-0.4)(1,0.4) |
| 11331 |
\psframe[fillstyle=hlines](-1.3,-0.5)(1.3,-0.4) |
| 11332 |
\psframe[fillstyle=hlines](-1.3,0.5)(1.3,0.4)} |
| 11333 |
\newpsobject{phasemodulator}{optdipole}{optdipolesize=2 0.8, optdipolecomp={\phasemodulatorcomp}} |
| 11334 |
\pnodes(0,1){A}(3,1){B} |
| 11335 |
\phasemodulator(A)(B){LiNbO$_3$} |
| 11336 |
\drawwidebeam[beamwidth=0.3, beaminside=false](A){}(B) |
| 11337 |
\end{pspicture} |
| 11338 |
\end{LTXexample} |
| 11339 |
% \iffalse |
| 11340 |
%</ignore> |
| 11341 |
% \fi |
| 11342 |
% |
| 11343 |
% \optitem{opttripolecomp}{\prm{macros}} |
| 11344 |
% \ifGERMAN Mit dieser Option kann die Zeichnung einer Komponente |
| 11345 |
% definiert werden, um dann mit \Lcs*{newpsobject} basierend auf |
| 11346 |
% \Lcomp{opttripole} eine neuen Komponente zu definieren. |
| 11347 |
% \fi |
| 11348 |
% \ifENGLISH |
| 11349 |
% This option defines the drawing of a component, and can be used to |
| 11350 |
% define a new component based in \Lcomp{opttripole} with |
| 11351 |
% \Lcs*{newpsobject}. |
| 11352 |
% \fi |
| 11353 |
% |
| 11354 |
% \iffalse |
| 11355 |
%<*ignore> |
| 11356 |
% \fi |
| 11357 |
\begin{LTXexample}[morekeywords={[21]opttripolecomp}] |
| 11358 |
\begin{pspicture}(3,2) |
| 11359 |
\def\ampmodcomp{% |
| 11360 |
\psframe*[linestyle=none](-0.5,0)(0.5,0.1) |
| 11361 |
\psframe*[linestyle=none, linecolor=gray](-0.5,0.1)(0.5,0.2)} |
| 11362 |
\newpsobject{ampmod}{opttripole}{opttripolecomp={\ampmodcomp}} |
| 11363 |
\pnodes(0,0){A}(2,1.5){B}(3,0){C} |
| 11364 |
\ampmod(A)(B)(C){AM} |
| 11365 |
\drawwidebeam[beamwidth=0.3](A){}(C) |
| 11366 |
\end{pspicture} |
| 11367 |
\end{LTXexample} |
| 11368 |
% \iffalse |
| 11369 |
%</ignore> |
| 11370 |
% \fi |
| 11371 |
% |
| 11372 |
% \end{optionlist} |
| 11373 |
% |
| 11374 |
% \ifGERMAN |
| 11375 |
% \section{Benutzerdefinierte Version existierender Komponenten} |
| 11376 |
% \fi |
| 11377 |
% \ifENGLISH |
| 11378 |
% \section{Customized versions of existing components} |
| 11379 |
% \fi |
| 11380 |
% \label{sec:customcomp} |
| 11381 |
% |
| 11382 |
% \ifENGLISH |
| 11383 |
% You can define a customized version of an existing component using the |
| 11384 |
% \Lcs*{newpsobject} macro. With this you can define a new component using |
| 11385 |
% predefined objects with a set of options. These options serve only as default |
| 11386 |
% values and can be overridden when calling the macro. |
| 11387 |
% \fi |
| 11388 |
% \ifGERMAN |
| 11389 |
% Sie können eine benutzerdefinierte Version einer existierenden Komponente mit |
| 11390 |
% \Lcs*{newpsobject} definieren, die z.B. andere Voreinstellungen oder und ein |
| 11391 |
% anderes Aussehen hat. |
| 11392 |
% \fi |
| 11393 |
% |
| 11394 |
% \iffalse |
| 11395 |
%<*ignore> |
| 11396 |
% \fi |
| 11397 |
\begin{LTXexample}[morekeywords={[21]{newpsobject}}] |
| 11398 |
\begin{pspicture}(3,1.7) |
| 11399 |
\newpsobject{sbn}{crystal}{% |
| 11400 |
voltage, lamp, % |
| 11401 |
fillstyle=solid, fillcolor=yellow!90!black} |
| 11402 |
\sbn[label=1.2 45, beam](0,1)(3,1){SBN:Ce} |
| 11403 |
\end{pspicture} |
| 11404 |
\end{LTXexample} |
| 11405 |
|
| 11406 |
\begin{LTXexample}[morekeywords={[21]{newpsobject}}] |
| 11407 |
\begin{pspicture}(3,1.7) |
| 11408 |
\newpsobject{pumpcoupler}{wdmcoupler}{% |
| 11409 |
coupleralign=top, addtoFiberIn2={ArrowInside=->, arrowscale=2}} |
| 11410 |
\pumpcoupler[label=0.5 180](0,1)(0,0)(3,1){Pumpcoupler} |
| 11411 |
\end{pspicture} |
| 11412 |
\end{LTXexample} |
| 11413 |
% \iffalse |
| 11414 |
%</ignore> |
| 11415 |
% \fi |
| 11416 |
% |
| 11417 |
% \iffalse |
| 11418 |
%<*ignore> |
| 11419 |
% \fi |
| 11420 |
\begin{LTXexample}[pos=t, morekeywords={[21]{newpsobject}}, caption={caption}] |
| 11421 |
\begin{pspicture}(10,2) |
| 11422 |
\newpsobject{MOLensIn}{lens}{lens=0.5 0.5 0.5} |
| 11423 |
\newpsobject{MOLensOut}{lens}{lens=1.5 1.5 1.5} |
| 11424 |
\pnodes(0,1){A}(10,1){B} |
| 11425 |
\MOLensIn[abspos=1](A)(B)\MOLensOut[abspos=2](A)(B) |
| 11426 |
\optplate[plateheight=1.5](A)(B) |
| 11427 |
\MOLensOut[abspos=8](A)(B)\MOLensIn[abspos=9](A)(B) |
| 11428 |
\addtopsstyle{Beam}{n=1, fillstyle=solid, fillcolor=green, opacity=0.3} |
| 11429 |
\psset{loadbeampoints} |
| 11430 |
\drawwidebeam[beamwidth=0.2, stopinside](A){1} |
| 11431 |
\drawwidebeam[beamdiv=-70]{1}{2} |
| 11432 |
\drawwidebeam[stopinside]{2-4} |
| 11433 |
\drawwidebeam[beamdiv=-70]{4}{5} |
| 11434 |
\drawwidebeam{5}(B) |
| 11435 |
\end{pspicture} |
| 11436 |
\end{LTXexample} |
| 11437 |
% \iffalse |
| 11438 |
%</ignore> |
| 11439 |
% \fi |
| 11440 |
% |
| 11441 |
% \ifENGLISH\section{Defining new objects}\fi |
| 11442 |
% \ifGERMAN\section{Neue Objekte definieren}\fi |
| 11443 |
% \label{sec:newobj} |
| 11444 |
% |
| 11445 |
% \ifENGLISH |
| 11446 |
% \nxLPack{pst-optexp} provides some high-level macros to allow very convenient |
| 11447 |
% definition of your own custom components. |
| 11448 |
% |
| 11449 |
% Note, that this part of the documentation is not complete. It roughly |
| 11450 |
% describes the steps to define own components since version 3.0. Some parts may |
| 11451 |
% be subject to change which are not backward compatible. |
| 11452 |
% \fi |
| 11453 |
% \ifGERMAN |
| 11454 |
% \nxLPack{pst-optexp} stellt einige Benutzermakros zur Verfügung, mit denen |
| 11455 |
% sehr bequem neue, eigene Komponenten definiert werden können. |
| 11456 |
% |
| 11457 |
% Beachten Sie, dass dieser Teil der Dokumentation nicht vollständig ist. Die |
| 11458 |
% notwendigen Schritte zur Definition neuer Komponenten seit Version 3.0 werden |
| 11459 |
% grob beschrieben, können sich aber noch ändern und sind nicht zwangsläufig |
| 11460 |
% abwärtskompatibel. |
| 11461 |
% \fi |
| 11462 |
% |
| 11463 |
% \begin{ltxsyntax} |
| 11464 |
% \xLcs{newOptexpDipole}\cmditem{newOptexpDipole}[fixopt]{name}{dftopt} |
| 11465 |
% \xLcs{newOptexpTripole}\cmditem{newOptexpTripole}[fixopt]{name}{dftopt} |
| 11466 |
% \xLcs{newOptexpFiberDipole}\cmditem{newOptexpFiberDipole}[fixopt]{name}{dftopt} |
| 11467 |
% \xLcs{newOptexpElecDipole}\cmditem{newOptexpElecDipole}[fixopt]{name}{dftopt} |
| 11468 |
% \end{ltxsyntax} |
| 11469 |
% |
| 11470 |
% \ifENGLISH |
| 11471 |
% These macros generate all organizing code for the component |
| 11472 |
% \textbackslash\prm{name} which handle the positioning, label |
| 11473 |
% placement, rotation and shifting, and the layering. In the simplest |
| 11474 |
% case you only have to define the actual drawing of the component |
| 11475 |
% outline. |
| 11476 |
% |
| 11477 |
% With the argument \prm{fixopt} you can specify argument settings which |
| 11478 |
% will not be allowed to be overwritten, with \prm{dftopt} you can |
| 11479 |
% specify a set of default arguments which may be overwritten with the |
| 11480 |
% components optional argument. Both arguments \prm{fixopt} and |
| 11481 |
% \prm{dftopt} are optional and may be omitted. |
| 11482 |
% |
| 11483 |
% The macros \Lcs{newOptexpFiberDipole} and \Lcs{newOptexpElecDipole} |
| 11484 |
% only differ from the generic \Lcs{newOptexpDipole} in the connection |
| 11485 |
% settings, like the components in \prettyref{chap:fibercomp} and |
| 11486 |
% \prettyref{chap:electrcomp}, respectively. |
| 11487 |
% |
| 11488 |
% The actual process of creating a new component is split up in different parts, |
| 11489 |
% depending on the component complexity and user requirements: |
| 11490 |
% \begin{enumerate} |
| 11491 |
% \item The component drawing (see \prettyref{sec:newobj-comp}), this is the |
| 11492 |
% only required part. |
| 11493 |
% \item Support for raytracing (optional) |
| 11494 |
% \item Optional support for \Lkeyword{rotateref}, \Lkeyword{extnode} and |
| 11495 |
% \Lkeyword{position}\opt{=start|end} (optional). |
| 11496 |
% \end{enumerate} |
| 11497 |
% \fi |
| 11498 |
% \ifGERMAN |
| 11499 |
% Diese Makros erzeugen den Code für die Positionierung, Drehung, |
| 11500 |
% Beschriftung und die Ebenenverwaltung der neuen Komponente |
| 11501 |
% \textbackslash\prm{name}. Im einfachsten Fall müssen Sie lediglich die |
| 11502 |
% eigentliche Zeichnung der Komponente erstellen. |
| 11503 |
% |
| 11504 |
% Mit dem Argument \prm{fixopt} können Optionen voreingestellt werden, |
| 11505 |
% die später über das optionale Argument der Komponente nicht verändert |
| 11506 |
% werden können, \prm{dftopt} erlaubt Voreinstellungen zu machen, die |
| 11507 |
% überschrieben werden können. Beide Argumente \prm{fixopt} und |
| 11508 |
% \prm{dftopt} sind optional und können auch ganz weggelassen werden. |
| 11509 |
% |
| 11510 |
% Die Definition der neuen Komponenten kann in unterschiedliche Schritte |
| 11511 |
% eingeteilt werden, je nach Komplexität und Anforderung des Benutzers: |
| 11512 |
% \begin{enumerate} |
| 11513 |
% \item Die Zeichnung (siehe \prettyref{sec:newobj-comp}), das ist der einzige |
| 11514 |
% erforderliche Schritt. |
| 11515 |
% \item Unterstützung von Raytracing (optional). |
| 11516 |
% \item Unterstützung für \Lkeyword{rotateref}, \Lkeyword{extnode} und |
| 11517 |
% \Lkeyword{position}\opt{=start|end} (optional). |
| 11518 |
% \end{enumerate} |
| 11519 |
% \fi |
| 11520 |
% |
| 11521 |
% \ifGERMAN Die folgenden Abschnitte enthalten die Entwicklung einer |
| 11522 |
% einfachen Beispielkomponente \nxLcs{testcomp}. |
| 11523 |
% \fi |
| 11524 |
% \ifENGLISH The following section show the development of a simple |
| 11525 |
% example component \nxLcs{testcomp}. |
| 11526 |
% \fi |
| 11527 |
% |
| 11528 |
% \ifENGLISH\subsection{The component drawing}\fi |
| 11529 |
% \ifGERMAN\subsection{Die Zeichnung der Komponente}\fi |
| 11530 |
% \label{sec:newobj-comp} |
| 11531 |
% |
| 11532 |
% \ifENGLISH |
| 11533 |
% You must define a macro which is called e.g. \cs{\ldots @comp}, which |
| 11534 |
% contains the component drawings. See the following two examples for dipole and |
| 11535 |
% tripole which show the orientation and position of the component coordinate |
| 11536 |
% system. |
| 11537 |
% \fi |
| 11538 |
% \ifGERMAN Sie müssen ein Makro \cs{\ldots @comp} definieren, welches |
| 11539 |
% die Zeichnung enthält. In den folgenden Beispielen sehen Sie die Ausrichtung |
| 11540 |
% und Position des Koordinatensystems für einen Zweipol und einen Dreipol. |
| 11541 |
% \fi |
| 11542 |
% |
| 11543 |
% \iffalse |
| 11544 |
%<*ignore> |
| 11545 |
% \fi |
| 11546 |
\begin{LTXexample} |
| 11547 |
\begin{pspicture}(3.5,2.6) |
| 11548 |
\newOptexpDipole{mydipole} |
| 11549 |
\makeatletter |
| 11550 |
\def\mydipole@comp{% |
| 11551 |
\psaxes[arrows=->](0,0)(0,-1.1)(1.3,1.3)[$x$,90][$y$,0] |
| 11552 |
}% |
| 11553 |
\makeatother |
| 11554 |
\mydipole(0,1)(3.5,1){\color{spot}label} |
| 11555 |
\drawbeam(0,1){}(3.5,1) |
| 11556 |
\end{pspicture} |
| 11557 |
\end{LTXexample} |
| 11558 |
\begin{LTXexample} |
| 11559 |
\begin{pspicture}(3.5,3.7) |
| 11560 |
\newOptexpTripole{mytripole}{labelangle=-60} |
| 11561 |
\makeatletter |
| 11562 |
\def\mytripole@comp{% |
| 11563 |
\psaxes[arrows=->](0,0)(-1.1,0)(1.3,1.3)[$x$,90][$y$,0] |
| 11564 |
}% |
| 11565 |
\makeatother |
| 11566 |
\mytripole(0,1)(2,1.7)(3,0){\color{spot}label} |
| 11567 |
\drawbeam(0,1){}(3,0) |
| 11568 |
\end{pspicture} |
| 11569 |
\end{LTXexample} |
| 11570 |
% \iffalse |
| 11571 |
%</ignore> |
| 11572 |
% \fi |
| 11573 |
% |
| 11574 |
% \ifGERMAN Unsere Beispielkomponente und ihre Zeichnung wird also wie |
| 11575 |
% folgt definiert: |
| 11576 |
% \fi |
| 11577 |
% \ifENGLISH Our example component and its drawing are defined as |
| 11578 |
% follows: |
| 11579 |
% \fi |
| 11580 |
% \iffalse |
| 11581 |
%<*ignore> |
| 11582 |
% \fi |
| 11583 |
\begin{LTXexample}[morekeywords={[21]{testcomp@comp}}] |
| 11584 |
\begin{pspicture}(3, 2) |
| 11585 |
\newOptexpDipole{testcomp} |
| 11586 |
\makeatletter |
| 11587 |
\def\testcomp@comp{% |
| 11588 |
\psframe[fillstyle=solid, fillcolor=black!30](-0.5,-0.5)(-0.3,0.5) |
| 11589 |
\psframe(-0.5,-0.5)(0.5,0.5) |
| 11590 |
}% |
| 11591 |
\makeatother |
| 11592 |
\begin{optexp} |
| 11593 |
\testcomp[position=0.6, labelalign=l](0,1)(3,1){label} |
| 11594 |
\drawbeam[beaminside=false](0,1){}(3,1) |
| 11595 |
\end{optexp} |
| 11596 |
\end{pspicture} |
| 11597 |
\end{LTXexample} |
| 11598 |
% \iffalse |
| 11599 |
%</ignore> |
| 11600 |
% \fi |
| 11601 |
% |
| 11602 |
% \ifGERMAN Die Positionierung der Komponente und der Beschriftung, |
| 11603 |
% sowie die Ebenen funktioniert also schon. |
| 11604 |
% \fi |
| 11605 |
% \ifENGLISH The positioning of the component and the label, and the |
| 11606 |
% layering is working already. |
| 11607 |
% \fi |
| 11608 |
% |
| 11609 |
% \ifENGLISH\subsection{Support for raytracing}\fi |
| 11610 |
% \ifGERMAN\subsection{Unterstützung von Raytracing}\fi |
| 11611 |
% |
| 11612 |
% \ifGERMAN Damit die Komponente Raytracing unterstützt, müssen die |
| 11613 |
% Grenzflächen mit ihren Eigenschaften definiert werden. Die Definition |
| 11614 |
% der Ebenen werden in einenm Makro \nxLcs{\prm{name}@nodes} definiert, |
| 11615 |
% damit sie auch in den unterschiedlichen Ebenen verfügbar sind. |
| 11616 |
% |
| 11617 |
% Die Definition der Ebenen erfolgt dann über das Makro \Lcs*{newOptexpComp} |
| 11618 |
% |
| 11619 |
% \begin{lstlisting}[gobble=2] |
| 11620 |
% \def\testcomp@nodes{% |
| 11621 |
% \newOptexpComp{% |
| 11622 |
% % Definition der ersten Grenzflaeche (GF) |
| 11623 |
% {-0.5 0} % x- und y-Koordinate der GF-Mitte |
| 11624 |
% {0 1} % Richtungsvektor der GF (x und y) |
| 11625 |
% -0.5 0.5 % Grenzen fuer die NA, gesehen als Faktoren des GF-Vektor |
| 11626 |
% trans % Verhalten der GF, kann 'trans', 'refl' oder 'abs' sein |
| 11627 |
% {PlainIfc} % Art der GF |
| 11628 |
% % Dasselbe fuer die rechte GF, nur die Mitte ist anders |
| 11629 |
% {0.5 0} {0 1} -0.5 0.5 trans {PlainIfc} |
| 11630 |
% \POE@key@n % Brechungsindex, koennte jede Zahl sein |
| 11631 |
% }% |
| 11632 |
% }% |
| 11633 |
% \end{lstlisting} |
| 11634 |
% \fi |
| 11635 |
% \ifENGLISH To add support for ray-tracing, you must define the |
| 11636 |
% interface with their properties. The definitions are nested in a macro |
| 11637 |
% \nxLcs{\prm{name}@nodes} in order to be accessible in the different |
| 11638 |
% layers. |
| 11639 |
% |
| 11640 |
% The definitions are done with the macro \Lcs*{newOptexpComp} |
| 11641 |
% |
| 11642 |
% \begin{lstlisting}[gobble=2] |
| 11643 |
% \def\testcomp@nodes{% |
| 11644 |
% \newOptexpComp{% |
| 11645 |
% % definition of the first interface (IF) |
| 11646 |
% {-0.5 0} % x- and y-coordinate of the IF center |
| 11647 |
% {0 1} % direction vector of the IF (x and y) |
| 11648 |
% -0.5 0.5 % limits use for the NA as factor for IF vector. |
| 11649 |
% trans % behavior of the IF, can be 'trans', 'refl' or 'abs' |
| 11650 |
% {PlainIfc} % type of IF |
| 11651 |
% % the same for the right IF, only the center is different |
| 11652 |
% {0.5 0} {0 1} -0.5 0.5 trans {PlainIfc} |
| 11653 |
% \POE@key@n % refractive index, could be any number |
| 11654 |
% }% |
| 11655 |
% }% |
| 11656 |
% \end{lstlisting} |
| 11657 |
% \fi |
| 11658 |
% |
| 11659 |
% \ifENGLISH So, in condensed form, our example component looks like |
| 11660 |
% this, and the beam is not drawn inside the component any more: |
| 11661 |
% \fi |
| 11662 |
% \ifGERMAN Unsere Komponent sieht also folgendermaßen aus, und der |
| 11663 |
% Strahl verläuft nicht mehr innerhalb der Komponente: |
| 11664 |
% \fi |
| 11665 |
% \iffalse |
| 11666 |
%<*ignore> |
| 11667 |
% \fi |
| 11668 |
\begin{LTXexample}[morekeywords={[21]{testcomp@comp, testcomp@nodes}}] |
| 11669 |
\begin{pspicture}(3, 2) |
| 11670 |
\newOptexpDipole{testcomp} |
| 11671 |
\makeatletter |
| 11672 |
\def\testcomp@comp{% |
| 11673 |
\psframe[fillstyle=solid, fillcolor=black!30](-0.5,-0.5)(-0.3,0.5) |
| 11674 |
\psframe(-0.5,-0.5)(0.5,0.5)}% |
| 11675 |
\def\testcomp@nodes{% |
| 11676 |
\newOptexpComp{% |
| 11677 |
{-0.5 0} {0 1} -0.5 0.5 trans {PlainIfc} |
| 11678 |
{0.5 0} {0 1} -0.5 0.5 trans {PlainIfc} \POE@key@n }}% |
| 11679 |
\makeatother |
| 11680 |
\begin{optexp} |
| 11681 |
\testcomp[position=0.6, labelalign=l](0,1)(3,1){label} |
| 11682 |
\drawbeam[beaminside=false](0,1){}(3,1) |
| 11683 |
\end{optexp} |
| 11684 |
\end{pspicture} |
| 11685 |
\end{LTXexample} |
| 11686 |
% \iffalse |
| 11687 |
%</ignore> |
| 11688 |
% \fi |
| 11689 |
% |
| 11690 |
% \ifENGLISH\subsection{Support for external nodes}\fi |
| 11691 |
% \ifGERMAN\subsection{Unterstützung von externen Knoten}\fi |
| 11692 |
% |
| 11693 |
% \ifGERMAN Damit nun, als letzter Schritt auch externe Knoten mit \Lkeyword{extnode}, |
| 11694 |
% Positionierung an den Anfang oder das Ende mit |
| 11695 |
% \Lkeyword{position}\opt{=start|end}, oder auch das Setzen eines |
| 11696 |
% anderen Drehpunktes mit \Lkeyword{rotateref} möglich wird, müssen die |
| 11697 |
% externen Dimensionen der Komponente bekannt gemacht werden. Dafür muss |
| 11698 |
% ein weiteres Makro mit dem Name \nxLcs{\prm{name}@ref} definiert |
| 11699 |
% werden, in dem auf Postscript-Ebene die Werte \opt{@@x} (halbe |
| 11700 |
% Breite), \opt{@@y} (halbe Höhe), und optional auch \opt{@@x0} und |
| 11701 |
% \opt{@@y0} (Verschiebung der Mitte) definiert werden müssen. |
| 11702 |
% \fi |
| 11703 |
% \ifENGLISH To enable, as last step, support for external nodes with |
| 11704 |
% \Lkeyword{extnode}, positioning at the start or end with |
| 11705 |
% \Lkeyword{position}\opt{=start|end}, and setting the rotation |
| 11706 |
% reference node with \Lkeyword{rotateref}, we need to provide the |
| 11707 |
% external dimensions of the component. For this we need to define a new |
| 11708 |
% macro \nxLcs{\prm{name}@ref}, which defines at Postscript level the |
| 11709 |
% values \opt{@@x} (half width), \opt{@@y} (half height), and optionally |
| 11710 |
% \opt{@@x0} and \opt{@@y0} (offset of the center). |
| 11711 |
% \fi |
| 11712 |
% \begin{lstlisting}[gobble=2] |
| 11713 |
% \def\testcomp@ref{% |
| 11714 |
% \POE@setref{ /@@x 0.5 def /@@y 0.5 def }% |
| 11715 |
% }% |
| 11716 |
% \end{lstlisting} |
| 11717 |
% |
| 11718 |
% \ifGERMAN Der Code für unsere Beispielkomponente \nxLcs{testcomp} ist |
| 11719 |
% damit vollständig, und sieht folgendermaßen aus: |
| 11720 |
% \fi |
| 11721 |
% \ifENGLISH This completes the code for our example component |
| 11722 |
% \nxLcs{testcomp}, which now looks like this: |
| 11723 |
% \fi |
| 11724 |
% \iffalse |
| 11725 |
%<*ignore> |
| 11726 |
% \fi |
| 11727 |
\begin{LTXexample}[morekeywords={[21]{testcomp@comp, testcomp@nodes, testcomp@ref}}] |
| 11728 |
\begin{pspicture}(3, 2) |
| 11729 |
\newOptexpDipole{testcomp} |
| 11730 |
\makeatletter |
| 11731 |
\def\testcomp@comp{% |
| 11732 |
\psframe[fillstyle=solid, fillcolor=black!30](-0.5,-0.5)(-0.3,0.5) |
| 11733 |
\psframe(-0.5,-0.5)(0.5,0.5)}% |
| 11734 |
\def\testcomp@nodes{% |
| 11735 |
\newOptexpComp{% |
| 11736 |
{-0.5 0} {0 1} -0.5 0.5 trans {PlainIfc} |
| 11737 |
{0.5 0} {0 1} -0.5 0.5 trans {PlainIfc} \POE@key@n }}% |
| 11738 |
\def\testcomp@ref{% |
| 11739 |
\POE@setref{ /@@x 0.5 def /@@y 0.5 def }}% |
| 11740 |
\makeatother |
| 11741 |
\begin{optexp} |
| 11742 |
\testcomp[position=0.6, labelalign=l, extnode=tl](0,1)(3,1){label} |
| 11743 |
\drawbeam[beaminside=false](0,1){}(3,1) |
| 11744 |
\psdot(\oenodeExt{}) |
| 11745 |
\end{optexp} |
| 11746 |
\end{pspicture} |
| 11747 |
\end{LTXexample} |
| 11748 |
% \iffalse |
| 11749 |
%</ignore> |
| 11750 |
% \fi |
| 11751 |
% |
| 11752 |
% \ifGERMAN |
| 11753 |
% \subsection{Beispiele für benutzerdefinierte Komponenten} |
| 11754 |
% \fi |
| 11755 |
% \ifENGLISH |
| 11756 |
% \subsection{Examples of custom components} |
| 11757 |
% \fi |
| 11758 |
% |
| 11759 |
% \iffalse |
| 11760 |
%<*ignore> |
| 11761 |
% \fi |
| 11762 |
\begin{LTXexample} |
| 11763 |
\begin{pspicture}(6,4) |
| 11764 |
\newOptexpTripole{raindrop} |
| 11765 |
\makeatletter |
| 11766 |
\def\raindrop@nodes{% |
| 11767 |
\newOptexpComp{% |
| 11768 |
{0 -2} { 0 2 } -2 2 trans {CurvedIfc} |
| 11769 |
{0 2} {0 -2} -2 2 refl {CurvedIfc} |
| 11770 |
{0 -2} { 0 2 } -2 2 trans {CurvedIfc} |
| 11771 |
\POE@key@n }}% |
| 11772 |
\def\raindrop@comp{\pscircle(0,0){2}}% |
| 11773 |
\raindrop(0,4)(4,2)(0,0) |
| 11774 |
\psset{beamalign=abs, arrows=->, arrowscale=2} |
| 11775 |
\drawbeam[linecolor=red](0,3){}(0,1) |
| 11776 |
\drawbeam[n=*n*1.05, linecolor=blue](0,3){}(0,1) |
| 11777 |
\end{pspicture} |
| 11778 |
\end{LTXexample} |
| 11779 |
% \iffalse |
| 11780 |
%</ignore> |
| 11781 |
% \fi |
| 11782 |
% |
| 11783 |
% \ifGERMAN |
| 11784 |
% \chapter{Beispiele} |
| 11785 |
% \fi |
| 11786 |
% \ifENGLISH |
| 11787 |
% \chapter{Examples} |
| 11788 |
% \fi |
| 11789 |
% \label{sec:examples} |
| 11790 |
% \iffalse |
| 11791 |
%<*ignore> |
| 11792 |
% \fi |
| 11793 |
\enlargethispage{1.5cm} |
| 11794 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11795 |
\begin{pspicture}(0.1,0.4)(10,4.5) |
| 11796 |
\psset[optexp]{lens=1 1 0.7, loadbeampoints} |
| 11797 |
\pnodes(2,4){L}([Xnodesep=4]L){M}([Xnodesep=1.5]M){IRSpec}([offset=-2.5]M){OSA} |
| 11798 |
\begin{optexp} |
| 11799 |
\optbox[position=start, innerlabel, optboxwidth=1.8](L)(M){fs laser} |
| 11800 |
\lens[abspos=1](L)(M) |
| 11801 |
\optbox[abspos=1.85, optboxsize=0.7 0.15, fillstyle=solid, fillcolor=black](L)(M){sample} |
| 11802 |
\lens[abspos=2.7](L)(M) |
| 11803 |
\mirror[labelangle=45](L)(M)(OSA){flip mirror} |
| 11804 |
\optbox[position=end, optboxsize=3.2 1, innerlabel, compshift=-0.2](M)(IRSpec){IR spectrometer} |
| 11805 |
\lens[abspos=1](M)(OSA) |
| 11806 |
\optplane[angle=90]([offset=-1.5]M) |
| 11807 |
\optfiber[fiberloopradius=0.2, label=1, newFiber={linewidth=1.5\pslinewidth}]([offset=-1.5]M)(OSA){MM fiber} |
| 11808 |
\optbox[position=end, innerlabel, optboxwidth=1.1](M)(OSA){OSA} |
| 11809 |
\newpsstyle{Beam}{linestyle=none, fillcolor=red, fillstyle=solid, raytrace=false} |
| 11810 |
\drawwidebeam[beamwidth=0.2, stopinside]{1-2} |
| 11811 |
\drawwidebeam[beamdiv=-25]{2-3} |
| 11812 |
\drawwidebeam[loadbeampoints=false, beamdiv=25]{3-4} |
| 11813 |
\drawwidebeam[startinside]{4-5} |
| 11814 |
\drawwidebeam[savebeampoints=false, beamalign=abs]{5-6} |
| 11815 |
\drawwidebeam[stopinside]{5}{7} |
| 11816 |
\drawwidebeam[beamdiv=-25]{7-8} |
| 11817 |
\end{optexp} |
| 11818 |
\end{pspicture} |
| 11819 |
\end{LTXexample} |
| 11820 |
|
| 11821 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11822 |
\begin{pspicture}(-4.2,-1)(3,3) |
| 11823 |
\pnodes(-2,0){LOut}(0,0){Grat}(4;45){Out}(2.5;70){Mvar} |
| 11824 |
\newpsstyle{Beam}{linewidth=2\pslinewidth, linecolor=red!90!black} |
| 11825 |
\begin{optexp} |
| 11826 |
\optbox[optboxwidth=2.2, labeloffset=0, position=start](LOut)(Grat){diode laser} |
| 11827 |
\mirror[variable, label=0.5](Grat)(Mvar)(Grat){M$_\mathrm{var}$} |
| 11828 |
\optretplate[position=0.3](LOut)(Grat){$\nicefrac{\lambda}{4}$} |
| 11829 |
\optgrating(LOut)(Grat)(Out){grating} |
| 11830 |
\drawbeam[arrows=->]{1}{3}{4}(Out) |
| 11831 |
\drawbeam{2}{4} |
| 11832 |
\end{optexp} |
| 11833 |
\rput[l](-3,2){Littman setup} |
| 11834 |
\end{pspicture} |
| 11835 |
\end{LTXexample} |
| 11836 |
\bigskip |
| 11837 |
|
| 11838 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11839 |
\begin{pspicture}(8.5,1.9) |
| 11840 |
\pnodes(1.4,1.3){Laser}(7.6,1.3){Diode} |
| 11841 |
\optbox[position=start, labeloffset=0](Laser)(Diode){Laser}% |
| 11842 |
\optbox[abspos=4, optboxsize=1 0.6, labeloffset=1, n=3, |
| 11843 |
compname=PC, angle=-10, rotateref=l](Laser)(Diode){Photonic Crystal} |
| 11844 |
\optdetector[dettype=diode](\oenodeOut{PC})(Diode|\oenodeOut{PC}){PD} |
| 11845 |
\nodexn{(\oenodeIn{PC}) + (2;170)}{Angle1} |
| 11846 |
\psline[linestyle=dashed](\oenodeIn{PC})(Angle1) |
| 11847 |
\psarc{<->}(\oenodeIn{PC}){1.3}{330}{30} |
| 11848 |
\psarc[arcsep=1pt]{<->}(\oenodeIn{PC}){2}{170}{180} |
| 11849 |
\uput{2.1}[175](\oenodeIn{PC}){\small $\varphi$} |
| 11850 |
\drawbeam{-} |
| 11851 |
\end{pspicture} |
| 11852 |
\end{LTXexample} |
| 11853 |
\bigskip |
| 11854 |
|
| 11855 |
\enlargethispage{2cm} |
| 11856 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11857 |
\begin{pspicture}(10.4,1.7) |
| 11858 |
\pnodes(1.2,1){Start}(9.2,1){CCD} |
| 11859 |
\begin{optexp} |
| 11860 |
\optbox[position=end, label=0, optboxwidth=1.2](CCD)(Start){Laser} |
| 11861 |
\optbox[position=end, label=0, optboxwidth=1.2](Start)(CCD){CCD} |
| 11862 |
\polarization[poltype=perp,abspos=0.5](Start)(CCD) |
| 11863 |
\optretplate[abspos=1](Start)(CCD){$\nicefrac{\lambda}{2}$} |
| 11864 |
\lens[lens=0.4 0.4 0.5,abspos=2](Start)(CCD){$L_1$} |
| 11865 |
\lens[abspos=4](Start)(CCD){$L_2$} |
| 11866 |
\optplate[abspos=6, platelinewidth=3\pslinewidth](Start)(CCD){SLM} |
| 11867 |
\optplate[abspos=6.5, labelangle=180](Start)(CCD){PF} |
| 11868 |
\polarization[abspos=6.7](Start)(CCD) |
| 11869 |
\lens[abspos=7](Start)(CCD){$L_3$} |
| 11870 |
\drawbeam[linewidth=2\pslinewidth]{1}{2} |
| 11871 |
\end{optexp} |
| 11872 |
\end{pspicture} |
| 11873 |
\end{LTXexample} |
| 11874 |
\medskip |
| 11875 |
|
| 11876 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11877 |
\begin{pspicture}(10.4,1.7) |
| 11878 |
\pnodes(1.2,1){Start}(9.2,1){CCD} |
| 11879 |
\begin{optexp} |
| 11880 |
\optbox[position=start, label=0, optboxwidth=1.2](Start)(CCD){Laser} |
| 11881 |
\polarization[poltype=perp,abspos=0.5](Start)(CCD) |
| 11882 |
\optretplate[abspos=1](Start)(CCD){$\nicefrac{\lambda}{2}$} |
| 11883 |
\lens[lens=0.4 0.4 0.5,abspos=2](Start)(CCD){$L_1$} |
| 11884 |
\pinhole[phwidth=0.05, abspos=2.35, labelangle=180](Start)(CCD){iris} |
| 11885 |
\lens[abspos=4](Start)(CCD){$L_2$} |
| 11886 |
\optplate[abspos=6,platelinewidth=3\pslinewidth](Start)(CCD){SLM} |
| 11887 |
\optplate[abspos=6.5,labelangle=180](Start)(CCD){PF} |
| 11888 |
\lens[abspos=7](Start)(CCD){$L_3$} |
| 11889 |
\optbox[position=end, label=0, optboxwidth=1.2](Start)(CCD){CCD} |
| 11890 |
\polarization[abspos=6.7, polsize=0.8](Start)(CCD) |
| 11891 |
\addtopsstyle{Beam}{fillstyle=solid, fillcolor=green!40!white, loadbeampoints} |
| 11892 |
\drawwidebeam[beamwidth=0.1, stopinside]{1}{4} |
| 11893 |
\drawwidebeam[beamdiv=-20]{4}{6} |
| 11894 |
\drawwidebeam[stopinside]{6-9} |
| 11895 |
\drawwidebeam[beamdiv=-30]{9-10} |
| 11896 |
\end{optexp} |
| 11897 |
\end{pspicture} |
| 11898 |
\end{LTXexample} |
| 11899 |
\bigskip |
| 11900 |
|
| 11901 |
\enlargethispage{2.5cm} |
| 11902 |
\begingroup |
| 11903 |
\captionsetup[lstlisting]{format=poecaption} |
| 11904 |
\begin{LTXexample}[pos=t, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\arxivurl{1112.5270v2}}] |
| 11905 |
\begin{pspicture}(0.3,0.4)(5.5,8.3) |
| 11906 |
\pnodes(2,7){L}(2,5.8){Pbs}([Xnodesep=1]Pbs){Blk1}(2,2.3){Bs} |
| 11907 |
\pnodes([Xnodesep=-1]Bs){Blk2}([Xnodesep=3.5]Bs){Out}(2,1.3){Slm} |
| 11908 |
\begin{optexp} |
| 11909 |
\optbox[position=end, innerlabel, optboxsize=1.2 0.6](Pbs)(L){Laser} |
| 11910 |
\psset{labelalign=r, mirrortype=extended} |
| 11911 |
\newpsstyle{ExtendedMirror}{fillstyle=solid, fillcolor=black} |
| 11912 |
\optretplate[position=0.4](L)(Pbs){HWP} |
| 11913 |
\beamsplitter[labelangle=-90](L)(Pbs)(Blk1){PBS} |
| 11914 |
\mirror[label=. -90 c](Pbs)(Blk1)(Pbs){B} |
| 11915 |
\lens[abspos=0.8, lens=0.7 0.7 0.7, n=2](Pbs)(Bs){MO} |
| 11916 |
\pinhole[phwidth=0.15, abspos=1.2](Pbs)(Bs){PH} |
| 11917 |
\lens[abspos=2.6, lensradius=1.4](Pbs)(Bs){L} |
| 11918 |
\psset{labelalign=c} |
| 11919 |
\beamsplitter[labelangle=-135](Pbs)(Bs)(Blk2){BS} |
| 11920 |
\mirror[labeloffset=0.4](Bs)(Blk2)(Bs){B} |
| 11921 |
\lens[abspos=1, lensradius=1.4](Bs)(Out){L} |
| 11922 |
\lens[abspos=2.8, lens=0.7 0.7 0.7, n=2](Bs)(Out){L} |
| 11923 |
\opttripole(Bs)(Slm)(Bs){% |
| 11924 |
\psframe[fillstyle=solid,fillcolor=gray!50](-0.3,0)(0.3,0.2) |
| 11925 |
\psline(-0.3,0.1)(-0.5,0.1)(-0.5,0.5)(0.5,0.5)(0.5,0.1)(0.3,0.1)}{SLM} |
| 11926 |
\addtopsstyle{Beam}{linestyle=none, fillstyle=solid, fillcolor=green!70!black} |
| 11927 |
\drawwidebeam[beamwidth=0.1]{1-4} |
| 11928 |
\drawwidebeam[beamwidth=0.1, beaminsidefirst, beaminsidelast]{3}{5-8} |
| 11929 |
\psset{savebeampoints=false, loadbeampoints} |
| 11930 |
\drawwidebeam{8-11}(Out)\drawwidebeam[beaminsidefirst]{8}{12} |
| 11931 |
\end{optexp} |
| 11932 |
\end{pspicture} |
| 11933 |
\end{LTXexample} |
| 11934 |
\endgroup |
| 11935 |
|
| 11936 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11937 |
\begin{pspicture}(6.4,3.2) |
| 11938 |
\addtopsstyle{Fiber}{linecolor=red}\psset{fiber=none} |
| 11939 |
\pnodes(2.3,2.3){Lin}([Xnodesep=4.5]Lin){Det} |
| 11940 |
\optbox[label=0.2, position=start, compname=L, extnode=b](Lin)(Det){% |
| 11941 |
\psGauss[yunit=0.03,sigma=0.03]{-0.5}{0.5}} |
| 11942 |
\optbox[label=0, compname=EAM, extnode=b, abspos=1.5](Lin)(Det){EAM} |
| 11943 |
\optfiber[labeloffset=0.3, abspos=3.2](Lin)(Det){fibre} |
| 11944 |
\optdetector(Lin)(Det){OSA} |
| 11945 |
\pnode([Xnodesep=-0.5,offset=-1]\oenodeExt{L}){Osc} |
| 11946 |
\elecsynthesizer[wire=none](Osc)(\oenodeExt{EAM}|Osc){10\,GHz} |
| 11947 |
\optarrowcomp[arrowcompsize=0.8 0.6, arrowscale=1.5](Osc)(\oenodeExt{EAM}|Osc){$\tau$} |
| 11948 |
\drawfiber{1-4} |
| 11949 |
\addtopsstyle{Wire}{arrows=->, arrowinset=0, arrowscale=1.5} |
| 11950 |
\drawwire{5}{6}\psset[optexp]{wireangleB=90} |
| 11951 |
\drawwire{6}(\oenodeExt{EAM})\drawwire{5}(\oenodeExt{L}) |
| 11952 |
\end{pspicture} |
| 11953 |
\end{LTXexample} |
| 11954 |
|
| 11955 |
\enlargethispage{1cm} |
| 11956 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11957 |
\begin{pspicture}(0.2,0.6)(8.2,3.5) |
| 11958 |
\pnodes(2,3){Laser}(2,1){PwMeter}(6,3){CplTop}(6,1){CplBot} |
| 11959 |
\psset{arrowscale=1.5, arrowinset=0} |
| 11960 |
\optbox[position=start, optboxsize=1.8 1, labeloffset=0](Laser)([Xnodesep=0.1]Laser){% |
| 11961 |
\begin{tabular}{@{}c@{}}Nd:YAG\\[-0.4ex]cw laser\end{tabular}} |
| 11962 |
\optcoupler[addtoFiberIn1={ArrowInside=->}, addtoFiberIn2={ArrowInside=-<}, |
| 11963 |
labeloffset=0.4](Laser)(PwMeter)(CplTop)(CplBot){WDM} |
| 11964 |
\optfiber[addtoFiberOut={ncurv=1, angleB=0}, addtoFiberIn={ncurv=1, angleA=0}, |
| 11965 |
compshift=-1, label=0.2 . l](CplBot)(CplTop){fiber} |
| 11966 |
\optdetector[dettype=diode]([Xnodesep=0.1]PwMeter)(PwMeter){power meter} |
| 11967 |
\end{pspicture} |
| 11968 |
\end{LTXexample} |
| 11969 |
|
| 11970 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11971 |
\begin{pspicture}(0.9,0.9)(10.4,6.1) |
| 11972 |
\psset{arrowscale=1.5, arrowinset=0} |
| 11973 |
\pnodes(2,5){PC1in}(4,5){PC1out}(6,5){PC2in}(8,5){PC2out}(2,2){CplSig} |
| 11974 |
\pnodes(5,2){CplIn}(2,1){CplOut}(10,4.5){Pump}(8,2){PumpSig} |
| 11975 |
\optisolator[compshift=0.8, addtoFiberIn={angleA=180}, |
| 11976 |
addtoFiberOut={angleB=180}, label=0.5 . l]% |
| 11977 |
(CplSig)(PC1in){isolator} |
| 11978 |
\polcontrol[addtoFiberIn={arrows=|-}](PC1in)(PC1out) |
| 11979 |
\optfiberpolarizer[labeloffset=0.6](PC1out)(PC2in){polarizer} |
| 11980 |
\polcontrol[addtoFiberOut={arrows=-|}](PC2in)(PC2out) |
| 11981 |
\wdmsplitter[labeloffset=0.3, coupleralign=bottom, addtoFiberIn={arrows=|-}, |
| 11982 |
addtoFiberOut1={arrows=->}, addtoFiberOut2={arrows=-|}]% |
| 11983 |
(CplIn)(CplOut)(CplSig){95/5} |
| 11984 |
\wdmcoupler[addtoFiberIn1={ArrowInside=->}, addtoFiberIn2={angleA=0}, |
| 11985 |
addtoFiberOut={angleB=0,arrows=-|}, ncurv=0.9, |
| 11986 |
coupleralign=bottom, compshift=0.8](Pump)(PC2out)(PumpSig){pump} |
| 11987 |
\optbox[position=start, innerlabel, optboxwidth=1.6](Pump)([offset=-0.1]Pump){980~nm} |
| 11988 |
\optfiber[fiberloops=2, labeloffset=0.4](CplIn)(PumpSig){Er$^+$-doped} |
| 11989 |
\end{pspicture} |
| 11990 |
\end{LTXexample} |
| 11991 |
\bigskip |
| 11992 |
|
| 11993 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 11994 |
\begin{pspicture}(1,1.2)(6.2,5) |
| 11995 |
\pnodes(1,4){SigIn}(3,4){BS}(3,5){LO}(5,4){Det1}(3,2){Det2} |
| 11996 |
\begin{optexp} |
| 11997 |
\optplane[compname=LO, angle=90](LO) |
| 11998 |
\beamsplitter[compname=BS](SigIn)(BS)(Det2) |
| 11999 |
\lens[abspos=0.5, compname=L2, n=2.1](Det2)(BS){$L_2$} |
| 12000 |
\lens[abspos=0.5, compname=L1, n=2.1](Det1)(BS){$L_1$} |
| 12001 |
\psset[optexp]{extnodealign=rel, extnode=r} |
| 12002 |
\optdetector[compname=Det1](BS)(Det1){PD1} |
| 12003 |
\optdetector[compname=Det2](BS)(Det2){PD2} |
| 12004 |
\addtopsstyle{Beam}{beamwidth=0.2, fillstyle=solid, |
| 12005 |
fillcolor=green, opacity=0.2} |
| 12006 |
\drawwidebeam(SigIn){BS}{L2}{Det2} |
| 12007 |
\drawwidebeam[beaminsidefirst]{BS}{L1}{Det1} |
| 12008 |
\newpsstyle{Beam}{linecolor=red, linestyle=dashed, linewidth=1.5\pslinewidth} |
| 12009 |
\drawbeam{LO}{BS}{L1}{Det1} |
| 12010 |
\drawbeam[beaminsidefirst]{BS}{L2}{Det2} |
| 12011 |
\end{optexp} |
| 12012 |
\cnodeput[framesep=5pt]([Xnodesep=0.5, offset=-0.5]\oenodeExt{Det1}|\oenodeExt{Det2}){M}{\rule{2.5mm}{1pt}} |
| 12013 |
\psset{arrows=<-, arrowscale=1.5, arrowinset=0} |
| 12014 |
\nccurve[angleA=90]{M}{\oenodeExt{Det1}} |
| 12015 |
\nccurve[angleA=180, angleB=-90]{M}{\oenodeExt{Det2}} |
| 12016 |
\end{pspicture} |
| 12017 |
\end{LTXexample} |
| 12018 |
\bigskip |
| 12019 |
|
| 12020 |
\begin{LTXexample}[pos=t, caption={caption}, label={ex:lclv}] |
| 12021 |
\begin{pspicture}(-0.2,0)(9,5) |
| 12022 |
\psset[optexp]{lens=1.2 0 1.2, n=1.72} |
| 12023 |
\addtopsstyle{Beam}{fillstyle=solid, fillcolor=green, opacity=0.3} |
| 12024 |
\pnodes(2.4,1){BS1}([offset=3]BS1){M1}([Xnodesep=5.5]M1){PP}(PP|BS1){BS2} |
| 12025 |
\begin{optexp} |
| 12026 |
\optbox[label=0, position=start, optboxwidth=1.6]([Xnodesep=-1]BS1)(BS1){Nd:YAG} |
| 12027 |
\beamsplitter[compname=BS](BS2)(BS1)(M1){BS} |
| 12028 |
\optdipole[position=0.2, compname=LCLV, optdipolesize=0.28 1](BS1)(BS2){% |
| 12029 |
\psframe[fillstyle=solid,fillcolor=black,dimen=outer](-0.14,-0.5)(-0.02,0.5) |
| 12030 |
\psframe[fillstyle=solid,fillcolor=gray!50,dimen=outer](-0.02,-0.5)(0.14,0.5) |
| 12031 |
}{LCLV} |
| 12032 |
\optretplate(BS1)(M1){P} |
| 12033 |
\mirror(BS1)(M1)(PP){M} |
| 12034 |
\lens[position=0.2](M1)(PP){L} |
| 12035 |
\pinhole(M1)(PP) |
| 12036 |
\lens[position=0.2](PP)(M1){L} |
| 12037 |
\pentaprism(M1)(PP)(BS2){PP} |
| 12038 |
\beamsplitter(PP)(BS2)(BS1){BS} |
| 12039 |
\doveprism[compname=Dove, position=0.27, n=2.3](BS2)(BS1){Dove} |
| 12040 |
\lens[n=2.5](BS2)(BS1){L} |
| 12041 |
\drawwidebeam[beamwidth=0.3]{1-3} |
| 12042 |
\drawwidebeam[loadbeampoints]{3}{2}{4-}{3} |
| 12043 |
\end{optexp} |
| 12044 |
\end{pspicture} |
| 12045 |
\end{LTXexample} |
| 12046 |
|
| 12047 |
\enlargethispage{1cm} |
| 12048 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12049 |
\begin{pspicture}(0,-0.2)(8.6,5.6) |
| 12050 |
\pnodes(1.5,5){Laser}(4,5){PBS}(6.5,5){PBS2}(6.5,5.7){piezo}(4,2){BSFwd} |
| 12051 |
\pnodes(6.5,2){BSBwd}(2,2){BS4f}(2,0.5){M4f3}(8,2){M4f1}(8,0.5){M4f2}(1,2){CCD} |
| 12052 |
\psset{mirrorwidth=0.6, plateheight=0.7, outerheight=0.7, labeloffset=0.7, labelstyle=\scriptsize, lens=1.2 1.2 0.8, bssize=0.5} |
| 12053 |
\optbox[position=start, optboxsize=1.5 0.7, innerlabel]% |
| 12054 |
(Laser)(PBS){\parbox{1.5cm}{\centering Nd:YAG\\ 532\,nm}} |
| 12055 |
\lens[lensheight=0.5, position=0.2](Laser)(PBS){MO} |
| 12056 |
\pinhole[position=0.3,labelangle=180](Laser)(PBS){PH} |
| 12057 |
\lens[position=0.5](Laser)(PBS){L} |
| 12058 |
\optretplate[position=0.8](Laser)(PBS){$\nicefrac{\lambda}{2}$} |
| 12059 |
\beamsplitter(Laser)(PBS)(BSFwd){PBS} |
| 12060 |
\optretplate[position=0.4](PBS)(BSFwd){$\nicefrac{\lambda}{2}$} |
| 12061 |
\polarization(PBS)(BSFwd)\polarization(PBS2)(BSBwd) |
| 12062 |
\lens[position=0.8](PBS)(BSFwd){L} |
| 12063 |
\optretplate(PBS)(PBS2){$\nicefrac{\lambda}{2}$} |
| 12064 |
\beamsplitter(PBS)(PBS2)(piezo){PBS} |
| 12065 |
\optretplate[abspos=0.5](PBS2)(piezo){$\nicefrac{\lambda}{4}$} |
| 12066 |
\mirror[mirrortype=piezo,labelangle=90](PBS2)(piezo)(PBS2){PZ} |
| 12067 |
\lens[position=0.8,labelangle=180](PBS2)(BSBwd){L} |
| 12068 |
\crystal[crystalsize=1 0.5, voltage, lamp, fillstyle=solid, fillcolor=yellow!90!black, labeloffset=0.8](BSFwd)(BSBwd){SBN:Ce} |
| 12069 |
\beamsplitter(PBS)(BSFwd)(BSBwd){BS} |
| 12070 |
\beamsplitter[labelangle=-90](PBS2)(BSBwd)(BSFwd){BS} |
| 12071 |
\mirror(BSBwd)(M4f1)(M4f2){M}\mirror(M4f1)(M4f2)(M4f3){M} |
| 12072 |
\lens[labelangle=180](M4f2)(M4f3){L}\mirror(M4f2)(M4f3)(BS4f){M} |
| 12073 |
\beamsplitter(M4f3)(BS4f)(CCD){BS} |
| 12074 |
\optbox[position=end, label=0, optboxwidth=1](BS4f)(CCD){CCD} |
| 12075 |
\lens[abspos=0.7](BS4f)(BSFwd){L}\lens[abspos=0.7](BSBwd)(M4f1){L} |
| 12076 |
\addtopsstyle{Beam}{linewidth=2\pslinewidth, linejoin=2} |
| 12077 |
\drawbeam{1-6}{11-14}{13}{12}{15}{18}{16}{17}{25}{23}{24} |
| 12078 |
\drawbeam[beaminsidefirst]{6}{7}{10}{17}{16}{18}{26}{19-24} |
| 12079 |
\end{pspicture} |
| 12080 |
\end{LTXexample} |
| 12081 |
|
| 12082 |
\bgroup |
| 12083 |
\psset{unit=0.9} |
| 12084 |
\begin{LTXexample}[pos=t, caption={caption}, label=ex:transmission-loop] |
| 12085 |
\begin{pspicture}(13,5.5) |
| 12086 |
\psset{optboxwidth=1, labelstyle=\footnotesize, fiber=none} |
| 12087 |
\pnodes(1,5){LD}([Xnodesep=5.5]LD){CPLin1}([offset=-2]CPLin1){CPLin2} |
| 12088 |
\pnodes([Xnodesep=2.5]CPLin1){CPLout1}([Xnodesep=2.5]CPLin2){CPLout2} |
| 12089 |
\pnode([Xnodesep=3]CPLout1){RX} |
| 12090 |
\optbox[position=start, label=0](LD)(CPLin1){LD} |
| 12091 |
\optmzm[abspos=0.8](LD)(CPLin1){MZM} |
| 12092 |
\optamp[abspos=2](LD)(CPLin1){EDFA} |
| 12093 |
\optfilter[abspos=3](LD)(CPLin1){BPF} |
| 12094 |
\optswitch[abspos=4](LD)(CPLin1){SW} |
| 12095 |
\polcontrol[abspos=5, fiber=out](LD)(CPLin1) |
| 12096 |
\drawfiber{1-6} |
| 12097 |
\optcoupler[couplertype=none, fiber](CPLin1)(CPLin2)(CPLout1)(CPLout2) |
| 12098 |
\optamp[abspos=0.8, fiber=in](CPLout1)(RX){EDFA} |
| 12099 |
\optfilter[abspos=2](CPLout1)(RX){BPF} |
| 12100 |
\optbox[position=end](CPLout1)(RX){RX} |
| 12101 |
\drawfiber{8-10} |
| 12102 |
\pnodes([Xnodesep=-0.5]LD|CPLin2){TL}(RX|TL){TR}([offset=-2.5]TR){BR}(TL|BR){BL} |
| 12103 |
\optamp[fiber=i](CPLout2)(TR){EDFA} |
| 12104 |
\optfiber[label=0.3 . t, position=0.85](BL)(BR){SSMF 89.8~km} |
| 12105 |
\drawfiber[fiberstyle=angle, arm=1.2, linearc=0.5, startnode=N]{11}{12} |
| 12106 |
\optamp[position=0.3](BR)(BL){EDFA} |
| 12107 |
\optfilter[position=0.55, labelangle=180](BL)(BR){BPF} |
| 12108 |
\optfiber[fiberloops=1, label=0.3 . t, position=0.35](BL)(BR){DCF 16.2~km} |
| 12109 |
\optamp[position=0.85](BR)(BL){EDFA} |
| 12110 |
\optfilter[position=0.2](TL)(CPLin2){BPF} |
| 12111 |
\optswitch(TL)(CPLin2){SW} |
| 12112 |
\polcontrol[position=0.8, fiber=out](TL)(CPLin2) |
| 12113 |
\drawfiber{12-16}\drawfiber{17-19} |
| 12114 |
\drawfiber[fiberstyle=angle, arm=0.5, linearc=0.5, stopnode=1]{16}{17} |
| 12115 |
\end{pspicture} |
| 12116 |
\end{LTXexample} |
| 12117 |
\egroup |
| 12118 |
|
| 12119 |
\enlargethispage{1cm} |
| 12120 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12121 |
\begin{pspicture}(12, 4) |
| 12122 |
\psset{labeloffset=0.3, fiber=none} |
| 12123 |
\pnodes(1.6,2){In}(12, 2){Ref} |
| 12124 |
\optplate[linestyle=dashed, plateheight=3, position=1, compname=RefPlane](In)(Ref) |
| 12125 |
\addtopsstyle{Beam}{linestyle=none, beamdiv=20, beaminside=false, fillstyle=solid, fillcolor=red, opacity=0.3} |
| 12126 |
\multido{\i=1+1, \ii=165+10}{4}{% |
| 12127 |
\rput(Ref){\pnode(6;\ii){A\i}} |
| 12128 |
\optbox[optboxsize=0.5 0.3, position=end, compname=Box\i, extnode=l](Ref)(A\i) |
| 12129 |
\lens[lens=0 -0.6 0.6, abspos=0.5, compname=L\i](A\i)(Ref) |
| 12130 |
\lens[lens=1.2 1.2 0.8, abspos=1.1, n=1.65, compname=LC\i](A\i)(Ref) |
| 12131 |
\drawwidebeam{Box\i}{L\i}{LC\i}{RefPlane} |
| 12132 |
}% |
| 12133 |
\optcoupler[abspos=1](In)(In)(Ref)(Ref) |
| 12134 |
\wdmsplitter[abspos=2.5, compshift=1](In)(Ref)(Ref) |
| 12135 |
\wdmsplitter[abspos=2.5, compshift=-1](In)(Ref)(Ref) |
| 12136 |
\optbox[compshift=-1, position=start, label=0](In)(Ref){Laser1} |
| 12137 |
\optbox[compshift=1, position=start, label=0](In)(Ref){Laser2} |
| 12138 |
\drawfiber{17}{14}{15}{Box1}\drawfiber{15}{Box2} |
| 12139 |
\drawfiber{18}{14}{16}{Box3}\drawfiber{16}{Box4} |
| 12140 |
\end{pspicture} |
| 12141 |
\end{LTXexample} |
| 12142 |
\medskip |
| 12143 |
|
| 12144 |
\begin{LTXexample}[caption={caption}] |
| 12145 |
\begin{pspicture}(0.5,0)(2.2,4) |
| 12146 |
\pnodes(0,1){A}(1,1){BS}(2,1){G}(1,4){B} |
| 12147 |
\beamsplitter(G)(BS)(B) \optgrating(BS)(G)(BS) |
| 12148 |
\lens[lens=2 2 1.5, compshift=0.1, n=2.25](BS)(B) |
| 12149 |
\pinhole[phwidth=0.05, innerheight=0.05, position=0.8, compshift=0.18](BS)(B) |
| 12150 |
\optplane[angle=90](B) |
| 12151 |
\addtopsstyle{Beam}{linestyle=none, beamwidth=0.2, fillstyle=solid} |
| 12152 |
\drawwidebeam[fillcolor=red!25!white](A){1-2}{1}{3-5} |
| 12153 |
\drawwidebeam[fillcolor=red!50!white, beamangle=-5]{2}{1}{3-5} |
| 12154 |
\end{pspicture} |
| 12155 |
\end{LTXexample} |
| 12156 |
|
| 12157 |
\begingroup |
| 12158 |
\captionsetup[lstlisting]{format=poecaption} |
| 12159 |
\begin{LTXexample}[pos=t, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\href{http://de.wikipedia.org/w/index.php?title=Datei:Czerny-turner.png}{Wikipedia}}, label={ex:czerny-turner}] |
| 12160 |
\begin{pspicture}(0,-1)(8.5,4) |
| 12161 |
\psframe[fillstyle=solid,fillcolor=gray!90,linestyle=none](0,-1)(8.5,4) |
| 12162 |
\addtopsstyle{OptComp}{linecolor=white} |
| 12163 |
\newpsstyle{Beam}{ArrowInside=->, linejoin=2, arrowscale=1.3, arrowinset=0} |
| 12164 |
\addtopsstyle{ExtendedMirror}{hatchcolor=white, hatchsep=0.5\pslinewidth} |
| 12165 |
\pnodes(0,3){A}(8,3){B}(3,1.5){C}(8,0){D}(0,0){E}% |
| 12166 |
\psset{linewidth=1.5\pslinewidth, mirrorradius=13, mirrorwidth=1.5, gratingwidth=1.3, mirrortype=extended, phwidth=0.1, outerheight=1.5}% |
| 12167 |
\begin{optexp} |
| 12168 |
\pinhole[position=0.2](A)(B)% |
| 12169 |
\mirror(A)(B)(C) |
| 12170 |
\optgrating[reverse, angle=15, variable](B)(C)(D) |
| 12171 |
\mirror(C)(D)(E) |
| 12172 |
\pinhole[position=0.8](D)(E) |
| 12173 |
\drawwidebeam[ArrowInsidePos=0.3, beamwidth=0.2, linecolor=white, beamdiv=-7.15](A){1-3} |
| 12174 |
\psset{loadbeampoints, savebeampoints=false}% |
| 12175 |
\drawwidebeam[ArrowInsidePos=0.6, beamangle=3, linecolor=blue!60!white]{3-5}(E) |
| 12176 |
\drawwidebeam[ArrowInsidePos=0.7, linecolor=green!60!white, arrows=->, ArrowInsideMinLength=2]{3-5}(E) |
| 12177 |
\drawwidebeam[ArrowInsidePos=0.8, beamangle=-3, linecolor=red!60!white]{3-5}(E) |
| 12178 |
\end{optexp} |
| 12179 |
\end{pspicture} |
| 12180 |
\end{LTXexample} |
| 12181 |
\endgroup |
| 12182 |
|
| 12183 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12184 |
\begin{pspicture}(0,0.7)(9.4,3.3) |
| 12185 |
\psset[optexp]{couplertype=rectangle, fiber=none, detsize=0.5 0.6} |
| 12186 |
\multido{\i=1+1}{3}{% |
| 12187 |
\optbox[optboxsize=1.5 0.6, innerlabel,position=start](1.5,\i)(7,\i){Laser \i} |
| 12188 |
\wdmsplitter[position=0.2](1.5,\i)(7,\i)(7,\i) |
| 12189 |
\wdmcoupler[position=0.8](1.5,\i)(1.5,\i)(7,\i) |
| 12190 |
\optdetector[label=0.4 90 l](1.5,\i)(7,\i){Detector \i} |
| 12191 |
}% |
| 12192 |
\drawfiber[linecolor=blue, startnode=N]{1}{2}{7} |
| 12193 |
\drawfiber[linecolor=blue]{2}{11} |
| 12194 |
\drawfiber[linecolor=green, stopnode=1]{5}{6}{11} |
| 12195 |
\drawfiber[linecolor=green, stopnode=2]{6}{3} |
| 12196 |
\drawfiber[linecolor=red]{9}{10}{3} |
| 12197 |
\drawfiber[linecolor=red, startnode=2]{10}{7} |
| 12198 |
\drawfiber[linecolor=cyan]{11}{12} |
| 12199 |
\drawfiber[linecolor=magenta]{7}{8} |
| 12200 |
\drawfiber[linecolor=yellow]{3}{4} |
| 12201 |
\end{pspicture} |
| 12202 |
\end{LTXexample} |
| 12203 |
|
| 12204 |
\begin{LTXexample}[caption={caption}] |
| 12205 |
\psset{unit=1.5} |
| 12206 |
\begin{pspicture}(0,1)(2.2,4.2) |
| 12207 |
\pnodes(0,2){In}(1,2){G}(1,4){M1}(2,2){M2}(1,1){S} |
| 12208 |
\mirror[mirrortype=semitrans](In)(G)(M1) |
| 12209 |
\optbox[optboxwidth=0.15, angle=45, style=SemitransMirror](G)(M1) |
| 12210 |
\mirror[mirrortype=extended](G)(M1)(G) |
| 12211 |
\mirror[mirrortype=extended](G)(M2)(G) |
| 12212 |
\optplate[position=end](G)(S) |
| 12213 |
\newpsstyle{Beam}{linecolor=red, ArrowInside=->, ArrowInsidePos=0.4, arrowscale=1.5} |
| 12214 |
\drawbeam(In){1}{4}{1}{5} |
| 12215 |
\drawbeam(In){1-3}{2}{1}{5} |
| 12216 |
\end{pspicture} |
| 12217 |
\end{LTXexample} |
| 12218 |
|
| 12219 |
\begingroup |
| 12220 |
\captionsetup[lstlisting]{format=poecaption} |
| 12221 |
\begin{LTXexample}[vsep=10mm, pos=t, caption={\ifENGLISH Adapted from \fi\ifGERMAN Angepasst von \fi\href{http://www.semibyte.de/wp/graphicslibrary/gl-physics/versuchsaufbauten-f-praktikum/}{semibyte.de}}] |
| 12222 |
\begin{pspicture}(13.6,2.6) |
| 12223 |
\psset[optexp]{labeloffset=1, mirrorwidth=0.5, optboxwidth=2} |
| 12224 |
\pnodes(2,1){Laser}(12,2){Film}(Film|Laser){Ref} |
| 12225 |
\begin{optexp} |
| 12226 |
\optbox[position=start](Laser)(Ref){HeNe-Laser} |
| 12227 |
\pinhole[abspos=0.8](Laser)(Ref){Blende} |
| 12228 |
\optbox[abspos=2.5](Laser)(Ref){Raumfilter} |
| 12229 |
\lens[fillstyle=solid, fillcolor={[rgb]{0.87,0.91,0.93}}](Laser)(Ref){Linse} |
| 12230 |
\mirror[label=1 30]([offset=0.2]Laser)([offset=0.2]Ref)(Film){% |
| 12231 |
\begin{tabular}{c}Spiegel\\(fest)\end{tabular}} |
| 12232 |
\opttripole[label=0.4](Ref)(Film)(Ref){% |
| 12233 |
\psframe(0.5,1\pslinewidth)(-0.5,5\pslinewidth) |
| 12234 |
\psline[linewidth=2\pslinewidth](0.5,0)(-0.5,0) |
| 12235 |
}{Film} |
| 12236 |
\newpsstyle{Beam}{linewidth=2\pslinewidth, linecolor=red!90!black, beamalign=absolute} |
| 12237 |
\drawbeam{1-4} |
| 12238 |
\drawbeam[beampos=0.2]{4-6} |
| 12239 |
\mirror[variable, label=0.8 -30]([offset=-0.2]Laser)([offset=-0.2, Xnodesep=-0.7]Ref)(Film){var. Spiegel} |
| 12240 |
\drawbeam[beampos=-0.2]{4}{7}{6} |
| 12241 |
\end{optexp} |
| 12242 |
\end{pspicture} |
| 12243 |
\end{LTXexample} |
| 12244 |
\endgroup |
| 12245 |
|
| 12246 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12247 |
\begin{pspicture}(0,0.2)(6.6,3.1) |
| 12248 |
\psset{mirrorwidth=0.6, useNA=false, beaminsidefirst} |
| 12249 |
\pnodes(0,2){In}(1,2){BS}(1,0.5){M1}(2,1){M2}(6,1.5){Det} |
| 12250 |
\mirror[mirrortype=semitrans, n=1](In)(BS)(M1) |
| 12251 |
\mirror[label=0.6 180 . absolute, compname=M](BS)(M1)(M2|M1) |
| 12252 |
\mirror(M1)(M2|M1)(M2) |
| 12253 |
\mirror(M2|M1)(M2)([Xnodesep=1]M2) |
| 12254 |
\optbox[optboxsize=2 1, abspos=2, label=0, allowbeaminside=false](BS)([offset=0.5]Det){% |
| 12255 |
\parbox{1.6\psxunit}{spectral\\filter ($\Omega$)}} |
| 12256 |
\lens[lens=4 4 2, n=3.3]([Xnodesep=-3]Det)(Det) |
| 12257 |
\optbox[optboxsize=0.2 0.6, n=1, label=-1.2](\oenodeOut{6})(Det){% |
| 12258 |
\begin{tabular}{@{}c@{}}nonlinear\\ crystal\end{tabular}} |
| 12259 |
\optplate[linestyle=none](\oenodeOut{7})(Det) |
| 12260 |
\optdetector[detsize=0.6 0.6, fillstyle=solid, fillcolor=blue](\oenodeOut{6})(Det) |
| 12261 |
\newpsstyle{Beam}{linewidth=1.5\pslinewidth} |
| 12262 |
\drawbeam[linecolor=blue]{7-9} |
| 12263 |
\addtopsstyle{Beam}{linecolor=red} |
| 12264 |
\drawbeam(In){1-4}{6-8} |
| 12265 |
\drawbeam{1}{5-8} |
| 12266 |
\rput[r](\oenodeLabel{M}){$\tau$ |
| 12267 |
\psline[arrows=<->, arrowinset=0](0.15,0.25)(0.15,-0.15)} |
| 12268 |
\end{pspicture} |
| 12269 |
\end{LTXexample} |
| 12270 |
|
| 12271 |
\begin{LTXexample}[pos=t, caption={caption}, label={ex:glan-thompson}] |
| 12272 |
\begin{pspicture}(-1,-0.5)(8,1.5) |
| 12273 |
\newpsobject{perppol}{polarization}{poltype=perp, linecolor=green, polsize=1} |
| 12274 |
\newpsobject{parpol}{polarization}{poltype=parallel, linecolor=red, polsize=0.8} |
| 12275 |
\newpsstyle{Polarization}{arrowinset=0, arrowscale=1.2} |
| 12276 |
\pnodes(0,1){A}(8,1){B}(4,-0.5){C} |
| 12277 |
\glanthompson[glanthompsongap=0.2, glanthompsonsize=2 1](A)(B) |
| 12278 |
\optplane(B)\optplane[angle=90](C) |
| 12279 |
\drawbeam(A){1-2} |
| 12280 |
\drawbeam[linestyle=dashed, dash=2pt 2pt, linecolor=red, arrows=->](A){1}{3} |
| 12281 |
\parpol[abspos=1](A)(B)\perppol[abspos=1](A)(B) |
| 12282 |
\nodexn{(\oenodeBeam{})-1.5(!\oeBeamVec{})}{D} |
| 12283 |
\perppol[abspos=7](A)(B)\parpol(D)(\oenodeBeam{}) |
| 12284 |
\end{pspicture} |
| 12285 |
\end{LTXexample} |
| 12286 |
\enlargethispage{1.5cm} |
| 12287 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12288 |
\begin{pspicture}(13.7,2.9) |
| 12289 |
\newpsstyle{Wire}{arm=0.1, arrows=->} |
| 12290 |
\psset[optexp]{optboxsize=1.2 0.8, optmzmsize=1.2 0.8, fiber=none, label=0.7} |
| 12291 |
\pnodes(2,1){L}([Xnodesep=11]L){A} |
| 12292 |
\optbox[position=start, optboxwidth=2, label=0](L)(A){DFB-Laser} |
| 12293 |
\optbox[abspos=1, label=0, compname=Eam, extnode=t](L)(A){EAM} |
| 12294 |
\optmzm[abspos=4.5, compname=Mzm1, extnode=t](L)(A){MZM} |
| 12295 |
\optmzm[abspos=6, compname=Mzm2, extnode=t](L)(A){MZM} |
| 12296 |
\optamp[abspos=9](L)(A){EDFA} |
| 12297 |
\drawfiber{1-5}\drawfiber[arrows=->]{}(A) |
| 12298 |
\pnode([offset=1.5]\oenodeExt{Eam}){Osci} |
| 12299 |
\elecsynthesizer[compname=Syn, position=0.5, wire=o, label=0.5 . r](Osci)(\oenodeExt{Eam}){10\,GHz} |
| 12300 |
\psset[optexp]{label=0, wire, optboxsize=0.8 1.2} |
| 12301 |
\optbox[compname=Ppg1](\oenodeExt{Mzm1}|Osci)(\oenodeExt{Mzm1}){PPG} |
| 12302 |
\optbox[compname=Ppg2](\oenodeExt{Mzm2}|Osci)(\oenodeExt{Mzm2}){PPG} |
| 12303 |
\drawwire[arrows=-, wireangleB=-90]{Syn}(\oenodeExt{Mzm2}|Osci) |
| 12304 |
\rput([offset=0.5, Xnodesep=-0.3]A){Faserschleife} |
| 12305 |
\end{pspicture} |
| 12306 |
\end{LTXexample} |
| 12307 |
|
| 12308 |
\enlargethispage{110pt} |
| 12309 |
\begingroup |
| 12310 |
\captionsetup[lstlisting]{format=poecaption}% |
| 12311 |
\begin{LTXexample}[pos=t, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\doiurl{10.1364/OL.37.000930}}] |
| 12312 |
\begin{pspicture}(0,0.2)(13.5,4.7) |
| 12313 |
\psset[optexp]{optboxsize=1 0.8, label=0, fiber=none} |
| 12314 |
\pnodes(1,3.2){Scan}\pnode([offset=-1.6]Scan){Sat} |
| 12315 |
\pnode([Xnodesep=5]Scan){ScanCpl}\pnode(ScanCpl|Sat){SatCpl} |
| 12316 |
\pnode([Xnodesep=1.5,offset=-0.8]ScanCpl){Cpl}\pnode([Xnodesep=5]Cpl){PD} |
| 12317 |
\pnode([Xnodesep=2.5, offset=-1.4]Cpl){Pump} |
| 12318 |
\optbox[position=start](Scan)(ScanCpl){Scan} |
| 12319 |
\optmzm[abspos=1, compname=M1, extnode=t](Scan)(ScanCpl) |
| 12320 |
\optmzm[abspos=2.5, compname=M2, extnode=t](Scan)(ScanCpl) |
| 12321 |
\optamp[abspos=3.7](Scan)(ScanCpl) |
| 12322 |
\polcontrol[abspos=4.5, fiber=o](Scan)(ScanCpl) |
| 12323 |
\drawfiber{1-5} |
| 12324 |
\optbox[position=start, compname=S, extnode=b](Sat)(SatCpl){Sat} |
| 12325 |
\optmzm[abspos=1.75, compname=M3, extnode=b](Sat)(SatCpl) |
| 12326 |
\optamp[abspos=3.7](Sat)(SatCpl) |
| 12327 |
\polcontrol[abspos=4.5, fiber=o](Sat)(SatCpl) |
| 12328 |
\drawfiber{6-9} |
| 12329 |
\wdmcoupler[fiber=i](ScanCpl)(SatCpl)(Cpl) |
| 12330 |
\optisolator[position=0.1](Cpl)(Pump|Cpl) |
| 12331 |
\optfiber[position=0.6](Cpl)(Pump|Cpl) |
| 12332 |
\addtopsstyle{OptCircArrow}{arrows=<-} |
| 12333 |
\optcirculator[optcircangle=0 -90](Cpl)(PD)(Pump) |
| 12334 |
\wdmsplitter[position=0.8, coupleralign=t](Cpl)(PD) |
| 12335 |
\optbox[position=end, compname=Pd, extnode=t](Cpl)(PD){PD} |
| 12336 |
\optbox[position=end, compshift=-1.5](Cpl)(PD){OSA} |
| 12337 |
\optamp[fiber](Pump)(\oenodeIfc{2}{13}) |
| 12338 |
\optbox[position=start, optboxsize=0.6 1.2](Pump)(Pump|Cpl){Pump} |
| 12339 |
\drawfiber{10-15}\drawfiber{14}{16} |
| 12340 |
\optbox[compshift=0.7, optboxsize=2.5 0.8](\oenodeExt{M2})(\oenodeExt{Pd}|\oenodeExt{M2}){Lock-In Amp} |
| 12341 |
\addtopsstyle{Wire}{arm=0.1} |
| 12342 |
\drawwire[wireangleA=90, linearc=0.3](\oenodeExt{M2}){} |
| 12343 |
\drawwire[wireangleB=90, linearc=0.3]{}(\oenodeExt{Pd}) |
| 12344 |
\elecsynthesizer([offset=0.2]\oenodeExt{M1})(\oenodeExt{M1}) |
| 12345 |
\psset[optexp]{synthshape=rectangle} |
| 12346 |
\elecsynthesizer[synthtype=sawtooth](\oenodeExt{S}|Pump)(\oenodeExt{S}) |
| 12347 |
\elecsynthesizer[synthtype=triangle](\oenodeExt{M3}|Pump)(\oenodeExt{M3}) |
| 12348 |
\end{pspicture} |
| 12349 |
\end{LTXexample} |
| 12350 |
\endgroup |
| 12351 |
|
| 12352 |
\enlargethispage{100pt} |
| 12353 |
\begingroup |
| 12354 |
\captionsetup[lstlisting]{format=poecaption} |
| 12355 |
\begin{LTXexample}[pos=t, caption={\ifENGLISH Adapted from \fi\ifGERMAN Angepasst von \fi\href{http://www.semibyte.de/wp/graphicslibrary/gl-physics/versuchsaufbauten-f-praktikum/}{semibyte.de}}, label={ex:absspektr}] |
| 12356 |
\begin{pspicture}(0.2,0.5)(9,7.4) |
| 12357 |
\pnode(1,2){DL}\pnode([offset=0.5]DL){OAP}\pnode([Xnodesep=2]OAP){ST} |
| 12358 |
\pnode([offset=-1.4]ST){SP4}\pnode([Xnodesep=4]SP4){SP3} |
| 12359 |
\pnode([offset=3]SP3){JL}\pnode([Xnodesep=1]SP3|ST){SP1} |
| 12360 |
\pnode([Xnodesep=1]ST|JL){SP2}\pnode([Xnodesep=1.5,offset=3]SP2){Det} |
| 12361 |
\psset[optexp]{optboxsize=1.5 0.9, labeloffset=0.6} |
| 12362 |
\begin{optexp} |
| 12363 |
\optbox[position=start, innerlabel](DL)(OAP){\parbox{1.5\psunit}{\centering Dioden-\\laser}} |
| 12364 |
\psset[optexp]{mirrortype=extended} |
| 12365 |
\mirror[mirrorradius=2](DL)(OAP)(ST){OAP} |
| 12366 |
\psset[optexp]{variable} |
| 12367 |
\beamsplitter[bssize=0.4, labelangle=-45](SP4)(ST)(SP1){ST} |
| 12368 |
\optplate[abspos=1, plateheight=0.7](ST)(SP1){CP} |
| 12369 |
\mirror(ST)(SP1)(SP2){SP1}\mirror(SP1)(SP2)(Det){SP2} |
| 12370 |
\optdipole[label=-0.7 . b relative, optdipolesize=2, position=0.6](SP2)(Det){% |
| 12371 |
\psframe[dimen=outer](-1,-0.6)(1,0.6) |
| 12372 |
\psset{fillstyle=solid, fillcolor=blue!40, linestyle=none} |
| 12373 |
\psframe(-1,-0.5)(-0.9,0.5)\psframe(0.9,-0.5)(1,0.5)}{Plasmareaktor} |
| 12374 |
\optdetector[label=. 30 l](SP2)(Det){Detektor} |
| 12375 |
\optbox[position=end, innerlabel](SP3)(JL){\parbox{1.5\psunit}{\centering Justage-\\laser}} |
| 12376 |
\mirror(SP4)(SP3)(JL){SP3}\mirror(ST)(SP4)(SP3){SP4} |
| 12377 |
\psset{linewidth=2\pslinewidth} |
| 12378 |
\drawbeam[linecolor=blue, beampos=0.03]{1-2} |
| 12379 |
\drawbeam[beamalign=abs, loadbeampoints, linecolor=blue]{2-8} |
| 12380 |
\drawbeam[linecolor=red, beampos=-0.03]{9-11}{3-8} |
| 12381 |
\end{optexp} |
| 12382 |
\pnode([Xnodesep=1.2,offset=-0.6]\oenodeIn{8}){NaCl} |
| 12383 |
\psset{linestyle=dashed, arrows=->, arrowscale=1.5} |
| 12384 |
\ncline[nodesepA=0.1, nodesepB=0.2]{NaCl}{\oenodeIn{7}} |
| 12385 |
\ncline[nodesepA=0.1, nodesepB=0.3]{NaCl}{\oenodeOut{7}} |
| 12386 |
\rput[l](NaCl){NaCl-Fenster} |
| 12387 |
\end{pspicture} |
| 12388 |
\end{LTXexample} |
| 12389 |
\endgroup |
| 12390 |
|
| 12391 |
\begingroup |
| 12392 |
\captionsetup[lstlisting]{format=poecaption} |
| 12393 |
\begin{LTXexample}[pos=t, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\doiurl{10.1364/AOP.1.000308}, \ifGERMAN Abb. \fi\ifENGLISH Fig. \fi 8}, label={ex:autocorrelation}] |
| 12394 |
\begin{pspicture}(5.7,2.8) |
| 12395 |
\psset{mirrorwidth=0.7, bsstyle=plate, bssize=0.5, arrowinset=0, arrowscale=1.2} |
| 12396 |
\newpsobject{splitterplate}{beamsplitter}{linewidth=2\pslinewidth, linecolor=gray!50} |
| 12397 |
\pnodes(2.3,0){In}([offset=0.5]In){STM1}([Xnodesep=-2]STM1){M1} |
| 12398 |
\pnodes([offset=1]M1){M2}([offset=2]STM1){M3}([Xnodesep=-1]M3){M4}(M4|M2){STM2} |
| 12399 |
\splitterplate(In)(STM1)(M1) |
| 12400 |
\mirror(STM1)(M1)(M2) |
| 12401 |
\mirror(M1)(M2)(M3|M2) |
| 12402 |
\mirror(STM1)(M3)(M4) |
| 12403 |
\mirror[label=0.6 180 . absolute](M3)(M4)(STM2) |
| 12404 |
\rput[r](\oenodeLabel{}){$\tau$ |
| 12405 |
\psline[arrows=<->](0.15, 0.4)(0.15, -0.2)} |
| 12406 |
\splitterplate[compoffset=0.2, compname=STM2](M4)(STM2)([Xnodesep=1]STM2) |
| 12407 |
\pnode(\oenodeCenter{STM2}){STM2C} |
| 12408 |
\pnode([Xnodesep=4]STM2C){Out} |
| 12409 |
\lens[n=2](STM2C)(Out) |
| 12410 |
\optbox[position=0.65, optboxsize=0.1 0.6](STM2C)(Out) |
| 12411 |
\optplate[linestyle=none, position=0.75](STM2C)(Out) |
| 12412 |
\pinhole[position=0.95, outerheight=0.6](STM2C)(Out) |
| 12413 |
\optdetector[detsize=0.5 0.6](STM2C)(Out) |
| 12414 |
\drawbeam[linecolor=blue]{8-} |
| 12415 |
\newpsstyle{Beam}{ArrowInside=->, linecolor=red, ArrowInsideMinLength=1, arrows=>-} |
| 12416 |
\drawbeam[ArrowInsidePos=0.835](In){1-3}{7-9} |
| 12417 |
\drawbeam[ArrowInsidePos=0.74](In){1}{4-9} |
| 12418 |
\end{pspicture} |
| 12419 |
\end{LTXexample} |
| 12420 |
\endgroup |
| 12421 |
|
| 12422 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12423 |
\begin{pspicture}(13.8,3.8) |
| 12424 |
\pnode(2.3,2){Signal} |
| 12425 |
\pnode([Xnodesep=1.5,offset=0.8]Signal){UpIn} |
| 12426 |
\pnode([Xnodesep=1.5, offset=-0.8]Signal){LowIn} |
| 12427 |
\pnode([Xnodesep=3.5]UpIn){UpOut} |
| 12428 |
\pnode(UpOut|LowIn){LowOut} |
| 12429 |
\pnode([Xnodesep=1.5]UpOut){UpIn2} |
| 12430 |
\pnode([Xnodesep=3]UpIn2){UpOut2} |
| 12431 |
\pnode([Xnodesep=1.5]LowOut){LowIn2} |
| 12432 |
\pnode(UpOut2|LowIn2){LowOut2} |
| 12433 |
\psset{labelstyle=\footnotesize} |
| 12434 |
\psset{fiber=none}\addtopsstyle{Fiber}{linecolor=red} |
| 12435 |
\psset{wire=none}\addtopsstyle{Wire}{arm=0.1, arrows=->} |
| 12436 |
\optbox[position=start, label=0, optboxsize=2.3 0.8](Signal)([Xnodesep=0.1]Signal){2.5\,ps, 10\,GHz} |
| 12437 |
\wdmsplitter[label=0.4](Signal)(UpIn)(LowIn){50\%} |
| 12438 |
\optfiber[fiberloops=4, label=0.4, position=0.3](LowIn)(LowOut){L$_2$} |
| 12439 |
\optswitch[position=0.7](LowIn)(LowOut){AOM} |
| 12440 |
\optfiber[fiberloops=2, label=0.4, position=0.2](UpIn)(UpOut){L$_1$} |
| 12441 |
\optswitch[position=0.7](UpIn)(UpOut) |
| 12442 |
\optcoupler[label=0.4, position=0.3](UpOut)(LowOut)(UpIn2)(LowIn2){50\%} |
| 12443 |
\optbox[optboxsize=2 0.8, position=end, label=0, extnode=t](LowIn2)(LowOut2){Messsystem} |
| 12444 |
\drawfiber{1-4}{7}(LowIn2)\drawfiber[arrows=->](LowIn2){8} |
| 12445 |
\optdetector[abspos=0.4, detsize=0.6 0.8](UpIn2)(UpOut2){PD} |
| 12446 |
\optbox[optboxsize=0.8 0.8, label=0, position=0.44](UpIn2)(UpOut2){$\div 8$} |
| 12447 |
\optamp[position=0.8](UpIn2)(UpOut2) |
| 12448 |
\optbox[position=end, extnode=b, label=0, optboxsize=2 0.8](UpIn2)(UpOut2){Faserkamm} |
| 12449 |
\drawfiber{2}{5-7}(UpIn2)\drawfiber[arrows=->](UpIn2){9} |
| 12450 |
\drawwire{9-12} |
| 12451 |
\drawfiber[arrows=->](\oenodeExt{12})(\oenodeExt{8}) |
| 12452 |
\end{pspicture} |
| 12453 |
\end{LTXexample} |
| 12454 |
|
| 12455 |
\begingroup |
| 12456 |
\captionsetup[lstlisting]{format=poecaption} |
| 12457 |
\begin{LTXexample}[pos=t, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\doiurl{10.1103/PhysRevLett.105.263904}}, label={ex:wgm-pdc}] |
| 12458 |
\begin{pspicture}(0.6,2.8)(6.8,7.8) |
| 12459 |
\pnodes(1,6){Laser}(1,5){M}(3,4){PR}(5,5){PT}(6,7){D1} |
| 12460 |
\newpsstyle{Glass}{fillcolor=blue, fillstyle=solid, opacity=0.15, linecolor=blue!30!white} |
| 12461 |
\begin{optexp} |
| 12462 |
\optbox[position=start, innerlabel, optboxwidth=1.8](Laser)(M){Nd:YAG} |
| 12463 |
\optprism[style=Glass, compname=P, n=1, prismtype=reflective, prismangle=60, labeloffset=1.2](M)(PR)(PT){\begin{tabular}{@{}c@{}}diamond\\ prism\end{tabular}} |
| 12464 |
\mirror(Laser)(M)(\oenodeIfc{2}{P})% |
| 12465 |
\lens[abspos=1.05, style=Glass](\oenodeIfc{2}{P})(M)% |
| 12466 |
\optprism[compname=PDet, style=Glass](\oenodeIfc{2}{P})(PT)(D1)% |
| 12467 |
\lens[abspos=1.05, style=Glass](\oenodeIfc{2}{P})(\oenodeOut{PDet})% |
| 12468 |
\newpsstyle{Beam}{linestyle=none, fillstyle=solid}% |
| 12469 |
\drawwidebeam[fillcolor=green, beamwidth=0.2, beaminsidelast, beampathcount=5]{1}{3}{4}{2}% |
| 12470 |
\drawwidebeam[fillcolor=orange, beaminsidefirst, startinsidecount=1, loadbeam, beaminsidelast]{2}{6}% |
| 12471 |
\psset{savebeam=false, loadbeam, beamnodealign=vector}% |
| 12472 |
\drawwidebeam[fillcolor=orange]{6}{5}% |
| 12473 |
\drawwidebeam[fillcolor=green, n=1.2, beampathskip=1, savebeam=2]{6}{5}(D1) |
| 12474 |
\drawwidebeam[fillcolor=red, beampathskip=1, n=1.4, savebeam=3]{6}{5}(D1) |
| 12475 |
\drawwidebeam[fillcolor=red!50!black, beampathskip=1, n=1.57, savebeam=4]{6}{5}(D1) |
| 12476 |
\multido{\i=2+1}{3}{% |
| 12477 |
\backlayer{% |
| 12478 |
\pnode(!\oeBeamCenter{\i}){Det\i} |
| 12479 |
\nodexn{(Det\i)-(!\oeBeamVecMedian{\i})}{Det\i'}} |
| 12480 |
\optdetector[detsize=0.6 0.5](Det\i')(Det\i)} |
| 12481 |
\end{optexp} |
| 12482 |
\pscircle[style=Glass]([offset=-0.5]\oenodeIfc{2}{P}){0.5} |
| 12483 |
\rput[l]([offset=-0.5,Xnodesep=0.7]\oenodeIfc{2}{P}){WGM} |
| 12484 |
\end{pspicture} |
| 12485 |
\end{LTXexample} |
| 12486 |
\endgroup |
| 12487 |
|
| 12488 |
\begin{LTXexample}[caption={caption}] |
| 12489 |
\begin{pspicture}(2.2,2.2) |
| 12490 |
\definecolor[ps]{bl}{rgb}{tx@addDict begin Red Green Blue end}% |
| 12491 |
\pnode(0,0.5){In}\pnode(2,0.5){G1} |
| 12492 |
\pnode([Xnodesep=-1.5, offset=1.3]G1){G2}\pnode(G1|G2){MG} |
| 12493 |
\begin{optexp} |
| 12494 |
\optgrating[angle=40, gratingalign=c](In)(G1)(G2) |
| 12495 |
\optgrating[reverse, angle=40, gratingalign=c](G1)(G2)(MG) |
| 12496 |
\mirror[mirrorwidth=1, mirrortype=extended](G2)(MG)(G2) |
| 12497 |
\drawbeam[linecolor=red](In){1} |
| 12498 |
\multido{\i=0+1}{40}{% |
| 12499 |
\pstVerb{\i\space 650 400 sub 39 div mul 400 add |
| 12500 |
tx@addDict begin wavelengthToRGB end }% |
| 12501 |
\drawbeam[linecolor=bl, beamangle=\i\space 16 sub 0.2 mul]{1-2}% |
| 12502 |
\drawbeam[linecolor=bl, loadbeampoints]{2-3} |
| 12503 |
}% |
| 12504 |
\end{optexp} |
| 12505 |
\end{pspicture} |
| 12506 |
\end{LTXexample} |
| 12507 |
|
| 12508 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12509 |
\begin{pspicture}(5.6,3) |
| 12510 |
\pnodes(0,0.5){S1}(2,2.5){S2}(3,1.5){S3}(4,0.5){S4}(4.5,1){S5} |
| 12511 |
\psset{prismangle=30, mirrortype=extended} |
| 12512 |
\definecolor[ps]{bl}{rgb}{tx@addDict begin Red Green Blue end}% |
| 12513 |
\begin{optexp} |
| 12514 |
\optprism(S1)(S2)(S3)\optprism(S3)(S4)(S5) |
| 12515 |
\mirror[compshift=-0.07](\oenodeIn{2})([offset=1,Xnodesep=1]\oenodeIn{2})(\oenodeIn{2}) |
| 12516 |
\drawbeam[linecolor=orange, ArrowInside=->, ArrowInsidePos=0.2, arrowscale=1.5](S1){1} |
| 12517 |
\addtopsstyle{Beam}{linecolor=bl, linewidth=0.35\pslinewidth, beampathskip=1} |
| 12518 |
\multido{\r=0+0.5}{120}{% |
| 12519 |
\pstVerb{\r\space 620 590 sub 59 div mul 590 add |
| 12520 |
tx@addDict begin wavelengthToRGB end }% |
| 12521 |
\drawbeam[n=3.42 -0.002 \r\space mul add, beampos=\r\space 60 sub 0.0002 mul](S1){1-3} |
| 12522 |
}% |
| 12523 |
\end{optexp} |
| 12524 |
\end{pspicture} |
| 12525 |
\end{LTXexample} |
| 12526 |
|
| 12527 |
\begin{LTXexample}[pos=t, caption={caption}, label=ex:dsotm] |
| 12528 |
\begin{pspicture}(3,1.7) |
| 12529 |
\pnodes(-1,0){A}(1,1){B}(3,0){C} |
| 12530 |
\psframe*(0,0)(3,1.7) |
| 12531 |
\begin{optexp} |
| 12532 |
\optplane(0,0.7) |
| 12533 |
\optprism[prismalign=center, linecolor=white](A)(B)(C) |
| 12534 |
\optplane(C) |
| 12535 |
\addtopsstyle{Beam}{linecolor=white} |
| 12536 |
\drawbeam[ArrowInside=->]{1-2} |
| 12537 |
\definecolor[ps]{bl}{rgb}{% |
| 12538 |
tx@addDict begin Red Green Blue end}% |
| 12539 |
\addtopsstyle{Beam}{linestyle=fade, beaminsidelast, fadeto=black} |
| 12540 |
\multido{\i=0+1}{60}{% |
| 12541 |
\drawbeam[n=1.5 \i\space 0.003 mul add, linecolor=white, beampathskip=1, fadefuncname=gauss]{1-2} |
| 12542 |
\pstVerb{\i\space 650 400 sub 59 div mul 400 add |
| 12543 |
tx@addDict begin wavelengthToRGB end }% |
| 12544 |
\drawbeam[n=1.5 \i\space 0.003 mul add, linecolor=bl, beampathskip=2, linewidth=0.3\pslinewidth]{-}% |
| 12545 |
}% |
| 12546 |
\end{optexp} |
| 12547 |
\end{pspicture} |
| 12548 |
\end{LTXexample} |
| 12549 |
|
| 12550 |
\begin{LTXexample}[pos=t, caption={\ifENGLISH Adapted from \fi\ifGERMAN Angepasst von \fi\href{https://tex.stackexchange.com/q/581952}}, label=ex:multi-input-coupler] |
| 12551 |
\begin{pspicture}(10,6) |
| 12552 |
\begin{optexp} |
| 12553 |
\psset[optexp]{usefiberstyle, couplersize=0.25, couplersep=0.07} |
| 12554 |
\newpsstyle{Fiber}{linecolor=orange, linewidth=2\pslinewidth} |
| 12555 |
\pnodes(2,1){PumpDiode}(2,5){UpperPumpDiode}(1,3){SignalIsolatorIn}(4, 3){SignalIsolatorOut}(1,3){SignalIn}(10,3){SignalCombinerOut} |
| 12556 |
\pnodes(7,3){FiberIn}(9,3){FiberOut}(9,3){AmpOut} |
| 12557 |
\optdiode[compname=PumpDiode, position=start](PumpDiode)([Xnodesep=1]PumpDiode){Pump diode} |
| 12558 |
\optdiode[compname=UpperPumpDiode, position=start](UpperPumpDiode)([Xnodesep=1]UpperPumpDiode){Pump diode} |
| 12559 |
\optisolator[compname=SignalIsolator, fiber=none](SignalIsolatorIn)(SignalIsolatorOut)% |
| 12560 |
{\begin{tabular}{@{}c@{}}Signal\\Isolator\end{tabular}} |
| 12561 |
\wdmcoupler[compname=SignalPumpCombiner](UpperPumpDiode)(\oenodeOut{SignalIsolator})(PumpDiode)(FiberIn)% |
| 12562 |
{\begin{tabular}{@{}c@{}}Signal/Pump\\light combiner\end{tabular}} |
| 12563 |
\optfiber[ |
| 12564 |
compname=ActiveFiber, |
| 12565 |
position=start, |
| 12566 |
addtoFiberOut={arrows=->}](FiberIn)(FiberOut)% |
| 12567 |
{\begin{tabular}{@{}c@{}}Active\\fiber\end{tabular}} |
| 12568 |
\drawfiber[ArrowInside=->](SignalIn){SignalIsolator} |
| 12569 |
\end{optexp} |
| 12570 |
\nput{75}{AmpOut}{\begin{tabular}{@{}c@{}}Amplifier\\Output\end{tabular}} |
| 12571 |
\nput{-90}{SignalIn}{\begin{tabular}{@{}c@{}}Signal\\Input\end{tabular}} |
| 12572 |
\end{pspicture} |
| 12573 |
\end{LTXexample} |
| 12574 |
|
| 12575 |
\begin{LTXexample}[pos=t, linerange={1-1}, caption={caption}] |
| 12576 |
|
| 12577 |
\psset{unit=1.1, usefiberstyle=false} |
| 12578 |
\begin{pspicture}(9.3,6.1) |
| 12579 |
\psset{labeloffset=0.5, optboxsize=1 0.8, arrowscale=1.2, arrowinset=0} |
| 12580 |
\newpsstyle{Fiber}{linecolor=red!70!black, linewidth=1.5\pslinewidth} |
| 12581 |
\pnode(1, 3.7){LD}\pnode([Xnodesep=3.2]LD){LoopIn}\pnode([offset=-1.2]LoopIn){LoopInsIn} |
| 12582 |
\pnode([Xnodesep=2]LoopInsIn){LoopInsOut}\pnode(LoopInsOut|LoopIn){LoopOut} |
| 12583 |
\optswitch[compname=LSw, label=. 180 b, abspos=2.7, fiber=o](LD)(LoopIn){load switch} |
| 12584 |
\optcoupler[addtoFiber={ArrowInside=->, ArrowInsidePos=0.7}](LoopIn)(LoopInsIn)(LoopOut)(LoopInsOut){50/50} |
| 12585 |
\optbox[labelstyle=\footnotesize, position=end, fiber, label=0, optboxsize=1.6 1.2](LoopOut)([Xnodesep=0.1]LoopOut){\parbox{1.4\psxunit}{\centering Linear\\Optical\\Sampling}}% |
| 12586 |
\pnode([Xnodesep=2.8]LoopInsOut){TR} |
| 12587 |
\pnode([offset=-2]TR){BR} |
| 12588 |
\pnode([Xnodesep=-1.5]LoopInsIn){TL} |
| 12589 |
\pnode(TL|BR){BL} |
| 12590 |
\psset[optexp]{fiber=none} |
| 12591 |
\optisolator[isolatorsize=0.5, abspos=0.6](LoopInsOut)(TR){isolator}% 4 |
| 12592 |
\optbox[label=0, extnode=t, compname=PM, abspos=2](LoopInsOut)(TR){PM} |
| 12593 |
\drawfiber(LoopInsOut){4}{5} |
| 12594 |
\optfiber[label=0.2 . t, abspos=4](BL)(BR){fiber} |
| 12595 |
\drawfiber[fiberstyle=bar, angleA=0, startnode=N, linearc=0.5, armA=0.6]{5}{6} |
| 12596 |
\optamp[labelalign=b, abspos=3.8](BR)(BL){EDFA} |
| 12597 |
\optfilter[label=. 180 b, usefiberstyle, abspos=1](BL)(BR){OBPF} |
| 12598 |
\drawfiber{6-8} |
| 12599 |
\optswitch[labelalign=t, abspos=1, fiber=o](TL)(LoopInsIn){unload switch} |
| 12600 |
\drawfiber[angleA=180, linearc=0.5, armA=1, startnode=1, fiberstyle=bar]{8}{9} |
| 12601 |
\optbox[extnode=t, compname=Mod, innerlabel, abspos=0.7](LD)(LoopIn){MOD} |
| 12602 |
\optbox[position=start, innerlabel](LD)(LoopIn){LD} |
| 12603 |
\drawfiber{}{Mod} |
| 12604 |
\drawfiber[arrows=->]{Mod}{LSw} |
| 12605 |
\pnode([offset=1.2, Xnodesep=-0.7]\oenodeExt{Mod}){Osci}\pnode(\oenodeExt{PM}|Osci){Tmp} |
| 12606 |
\psset{wire=none, fiber=none, label=0.5 180 b} |
| 12607 |
\elecsynthesizer(Osci)(Tmp){SYN} |
| 12608 |
\elecsynthesizer[synthshape=rectangle, synthtype=pulse, abspos=0.7, compname=Pg, extnode=b](Osci)(Tmp){PG} |
| 12609 |
\optfilter[abspos=2](Osci)(Tmp){BPF} |
| 12610 |
\rput[r]([offset=0.4, Xnodesep=0.2]\oenodeOut{}){\psplot[plotpoints=200]{0}{1}{360 3.14159 div x 6 mul mul sin 2 exp 0.3 mul 0.15 sub}} |
| 12611 |
\drawwire[arm=0]{12-14}\drawwire[wireangleB=-90, arrows=->]{14}(\oenodeExt{PM}) |
| 12612 |
\psline[style=Wire, arrows=->](\oenodeExt{Pg})(\oenodeExt{Mod}) |
| 12613 |
\rput([Xnodesep=0.1, offset=0.2]\oenodeOut{Mod}){% |
| 12614 |
\psplot[plotpoints=200, unit=0.7]{0}{1}{2.7182818 x 0.5 sub 0.08 div 2 exp neg exp 0.5 mul}% |
| 12615 |
}% |
| 12616 |
\end{pspicture} |
| 12617 |
\end{LTXexample} |
| 12618 |
|
| 12619 |
\begingroup |
| 12620 |
\captionsetup[lstlisting]{format=poecaption} |
| 12621 |
\begin{LTXexample}[pos=t, linerange={1-1}, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\doiurl{10.1364/OL.37.000797}}, label={ex:ratchet}] |
| 12622 |
|
| 12623 |
\begin{pspicture}(12.3,8.8) |
| 12624 |
\newpsobject{laser}{optbox}{position=start, innerlabel} |
| 12625 |
\psset[optexp]{lens=2, phwidth=0.07, outerheight=0.6} |
| 12626 |
\pnode(1,7){L}\pnode([offset=-6]L){PSLM} |
| 12627 |
\pnode([Xnodesep=2,offset=1]L){ASLM}\pnode([offset=-0.5,Xnodesep=9]L){MRef} |
| 12628 |
\pnode([offset=-7]ASLM){ML}\pnode([Xnodesep=8.5]ML){Cam} |
| 12629 |
\begin{optexp} |
| 12630 |
\laser[optboxsize=1.6 0.6](L)(PSLM){Nd:YAG} |
| 12631 |
\beamsplitter[bssize=0.4, labelangle=-90](L)(L|MRef)(MRef){BS} |
| 12632 |
\lens[abspos=1.2, lens=0.5 0.5 0.4, n=2.5, labelangle=-10](L)(PSLM){MO} |
| 12633 |
\pinhole[abspos=1.4, labelangle=10](L)(PSLM){PH} |
| 12634 |
\lens[abspos=2.3](L)(PSLM){L} |
| 12635 |
\opttripole[label=0.5](L)(PSLM)(ASLM){\psframe[dimen=outer](-0.5,0)(0.5,0.1)}{PSLM} |
| 12636 |
\lens[label=0.6 -40](PSLM)(ASLM){L} |
| 12637 |
\opttripole[label=0.5](PSLM)(ASLM)(ML){\psframe[dimen=outer](-0.5,0)(0.5,0.1)}{ASLM} |
| 12638 |
\lens[position=0.45, labelangle=180](ASLM)(ML){L} |
| 12639 |
\optretplate[labelangle=180, position=0.55](ASLM)(ML){$\lambda/2$} |
| 12640 |
\optplate[labelangle=180, position=0.62](ASLM)(ML){P} |
| 12641 |
\mirror[labeloffset=0.4](ASLM)(ML)(Cam){M} |
| 12642 |
\newpsstyle{Beam}{fillcolor=green!80!black, opacity=0.5, fillstyle=solid, linestyle=none, beaminside=false} |
| 12643 |
\drawwidebeam[beamwidth=0.1, stopinside]{1-5} |
| 12644 |
\psset{loadbeampoints} |
| 12645 |
\drawwidebeam[stopinside, savebeampoints=2]{5-7} |
| 12646 |
\drawwidebeam[loadbeampoints=2, beamdiv=-8.5]{7-8} |
| 12647 |
\drawwidebeam[loadbeampoints=2, beamdiv=-8.5, beamangle=-4]{7-8} |
| 12648 |
\drawwidebeam[beamdiv=-8.5, beamangle=-4.5]{8-9} |
| 12649 |
\drawwidebeam[loadbeampoints=2, beamdiv=-8.5, beamangle=4]{7-8} |
| 12650 |
\drawwidebeam[beamdiv=-8.5, beamangle=4.5]{8-9} |
| 12651 |
\lens[abspos=2](ML)(Cam){L} |
| 12652 |
\lens[abspos=4](ML)(Cam){L} |
| 12653 |
\crystal[abspos=6, voltage, crystalsize=1 0.6, fillcolor=yellow!90!black, fillstyle=solid](ML)(Cam){SBN} |
| 12654 |
\beamsplitter[bssize=0.6](MRef)(MRef|Cam)(Cam){BS} |
| 12655 |
\lens[n=2.4](MRef|Cam)(Cam){L} |
| 12656 |
\optbox[optboxsize=0.8 0.6, position=end](ML)(Cam){Cam} |
| 12657 |
\drawwidebeam[savebeampoints=2, stopinside]{9-13} |
| 12658 |
\drawwidebeam[loadbeampoints=2, beamdiv=-16, beamangle=5, stopinside]{13-14} |
| 12659 |
\drawwidebeam[beamangle=-5]{14-18} |
| 12660 |
\drawwidebeam[loadbeampoints=2, beamdiv=-16, beamangle=-5, stopinside]{13-14} |
| 12661 |
\drawwidebeam[beamangle=5]{14-18} |
| 12662 |
\lens[lens=0.5 0.5 0.4, n=2](L|MRef)(MRef){MO} |
| 12663 |
\pinhole[position=0.53, labelangle=180](L|MRef)(MRef){PH} |
| 12664 |
\lens[position=0.65](L|MRef)(MRef){L} |
| 12665 |
\optplate[position=0.7](L|MRef)(MRef){S} |
| 12666 |
\mirror[labeloffset=0.4](L|MRef)(MRef)(MRef|Cam){M} |
| 12667 |
\addtopsstyle{Beam}{fillcolor=red!70} |
| 12668 |
\drawwidebeam[loadbeampoints=false, beamwidth=0.1, savebeampoints]{2}{19-21} |
| 12669 |
\drawwidebeam{21-23}{16-18} |
| 12670 |
\end{optexp} |
| 12671 |
\end{pspicture} |
| 12672 |
\end{LTXexample} |
| 12673 |
\endgroup |
| 12674 |
|
| 12675 |
\begingroup |
| 12676 |
\captionsetup[lstlisting]{format=poecaption} |
| 12677 |
\begin{LTXexample}[pos=t, linerange={1-1}, caption={\ifGERMAN Angepasst von \fi\ifENGLISH Adapted from \fi\doiurl{10.1364/AOP.1.000308}, \ifGERMAN Abb. \fi\ifENGLISH Fig. \fi 37}] |
| 12678 |
|
| 12679 |
\begin{pspicture}(-2,-0.2)(8.3,5.9) |
| 12680 |
\scriptsize |
| 12681 |
\definecolor[ps]{bl}{rgb}{tx@addDict begin Red Green Blue end}% |
| 12682 |
\addtopsstyle{SemitransMirror}{linestyle=solid, linewidth=0.7\pslinewidth} |
| 12683 |
\newpsstyle{ExtendedMirror}{style=SemitransMirror} |
| 12684 |
\psset[optexp]{mirrortype=extended, mirrorwidth=0.7, n=1, gratingalign=c} |
| 12685 |
\newpsstyle{Beam}{linecolor=red!80!black, linewidth=1.5\pslinewidth, beaminside=false} |
| 12686 |
\pnode(-2,0.5){In}\pnode(8,0.5){G1}\pnode([Xnodesep=-1.5, offset=1.3]G1){G2}\pnode(G1|G2){MG} |
| 12687 |
\pnode([Xnodesep=1,offset=1]In){M1} |
| 12688 |
\pnode([Xnodesep=5]In){M} |
| 12689 |
\begin{optexp} |
| 12690 |
\mirror[mirrortype=semitrans, mirrorlinewidth=0.7\pslinewidth, label=0.6 -90, compname=Et](In)([Xnodesep=-3]G1)(M1){Etalon} |
| 12691 |
\optgrating[angle=40](In)(G1)(G2) |
| 12692 |
\optgrating[reverse, angle=40](G1)(G2)(MG) |
| 12693 |
\mirror[mirrorwidth=1, label=1 135](G2)(MG)(G2){Stretcher} |
| 12694 |
\multido{\i=0+1}{40}{% |
| 12695 |
\pstVerb{% |
| 12696 |
\i\space 650 400 sub 39 div mul 400 add |
| 12697 |
tx@addDict begin wavelengthToRGB end }% |
| 12698 |
\drawbeam[linecolor=bl, beamangle=\i\space 16 sub 0.2 mul]{2-3}% |
| 12699 |
\drawbeam[linecolor=bl, loadbeampoints]{3-4} |
| 12700 |
}% |
| 12701 |
\newpsstyle{Beam}{fillstyle=solid, fillcolor=red!90!black, beamwidth=0.1, linestyle=none} |
| 12702 |
\drawwidebeam(In){1-2} |
| 12703 |
\pnode([offset=4]M1){M2}\pnode([Xnodesep=3]M2){M3} |
| 12704 |
\pnode([offset=0.2,Xnodesep=0.2]M|M1){M4} |
| 12705 |
\pnode([Xnodesep=4, offset=4]M){CM} |
| 12706 |
\pnode([Xnodesep=-1,offset=-2]M3){SM} |
| 12707 |
\pnode([offset=0.5]SM){S} |
| 12708 |
\mirror[compname=M1](\oenodeIn{Et})(M1)(M2) |
| 12709 |
\mirror(M1)(M2)(M3) |
| 12710 |
\mirror(M2)(M3)(M4) |
| 12711 |
\mirror[compname=M4, angle=1.5](M3)(M4)(CM) |
| 12712 |
\mirror[mirrorradius=3.5 0, angle=2, compname=CM](M4)(CM)(SM) |
| 12713 |
\mirror(G1)(M)(CM) |
| 12714 |
\optretplate[plateheight=0.5, abspos=1.5, label=0.6](M)(CM){$\lambda/2$} |
| 12715 |
\optbox[optboxsize=0.3 0.5, position=0.25, fillstyle=solid, fillcolor=yellow!90!black](CM)(SM){\begin{tabular}{@{}c@{}}nonlinear\\crystal\end{tabular}} |
| 12716 |
\pinhole[phwidth=0.1, position=0.35](CM)(SM) |
| 12717 |
\lens[lens=0.7 0.7 0.7, position=0.5, n=1.25](CM)(SM) |
| 12718 |
\lens[lens=0.7 0.7 0.7, position=0.9, n=1.31](CM)(SM) |
| 12719 |
\mirror[compname=SM](CM)(SM)(S) |
| 12720 |
\optbox[position=end, optboxsize=0.8 1.9, compshift=0.6, label=0](SM)(S){Spectrometer} |
| 12721 |
\drawwidebeam{Et}{5-8}\backlayer{\pnode(\oenodeBeamLow{}){BeamA}} |
| 12722 |
\drawwidebeam[loadbeam]{8-9}\backlayer{\pnode(\oenodeBeamUp{}){BeamB}} |
| 12723 |
\drawwidebeam[loadbeam]{9}{12-13} |
| 12724 |
\drawwidebeam[beamangle=-1.9, beaminsidelast]{10-11}\backlayer{\pnode(\oenodeBeamLow{}){BeamC}} |
| 12725 |
\drawwidebeam[loadbeam]{11}{9}\backlayer{\pnode(\oenodeBeamLow{}){BeamD}} |
| 12726 |
\drawwidebeam[loadbeam]{9}{12-13} |
| 12727 |
\addtopsstyle{Beam}{fillcolor=blue!40} |
| 12728 |
\drawwidebeam[beamwidth=0, beamdiv=8, stopinside]{12-14}\backlayer{\pnode(\oenodeBeamUp{}){BeamE}} |
| 12729 |
\drawwidebeam[loadbeam]{14-15}\backlayer{\pnode(\oenodeBeamUp{}){BeamF}} |
| 12730 |
\drawwidebeam[loadbeam, startinside]{15-17} |
| 12731 |
\end{optexp} |
| 12732 |
% now put the pulses |
| 12733 |
\def\mypulse{\psplot[style=Pulse]{-0.3}{0.3}{2.7182818 x 0.1 div 2 exp neg exp 0.8 mul}}% |
| 12734 |
\newpsstyle{Pulse}{linecolor=red!90!black, linewidth=1.5\pslinewidth, plotpoints=200} |
| 12735 |
\newpsstyle{Arrow}{arrowinset=0, arrowscale=1.2, linewidth=2\pslinewidth, linecolor=red!90!black} |
| 12736 |
\rput([Xnodesep=0.3,offset=0.1]In){% |
| 12737 |
\mypulse\psline[arrows=->, style=Arrow](0.3,0.2)(1,0.2)}% |
| 12738 |
\rput([Xnodesep=1.5,offset=-0.3]\oenodeCenter{Et}){\psline[arrows=<->, style=Arrow](-0.7,0)(0.7,0)} |
| 12739 |
\nlput[nrot=:U](\oenodeIn{M1})(\oenodeIn{Et}){2}{% |
| 12740 |
\psline[arrows=->, style=Arrow](-0.3,0.25)(-1,0.25)% |
| 12741 |
\rput(0,0.1){\psset{unit=0.7}\mypulse\rput(0.8,0){\mypulse}}}% |
| 12742 |
\nlput[nrot=:U](BeamA)(BeamB){1}{% |
| 12743 |
\psline[arrows=->, style=Arrow](1,0.25)(1.7,0.25)% |
| 12744 |
\rput(0,0.05){\psset{unit=0.7}\mypulse\rput(0.8,0){\mypulse}}}% |
| 12745 |
\nlput[nrot=:U](BeamD)(BeamC){2}{% |
| 12746 |
\psline[arrows=->, style=Arrow](-1,0.25)(-1.7,0.25)% |
| 12747 |
\psplot[style=Pulse]{-1}{1}{2.7182818 x 1 div 2 exp neg exp 0.5 mul 0.1 sub}}% |
| 12748 |
\nlput[nrot=:U](BeamF)(BeamE){1.9}{% |
| 12749 |
\rput(0,0.05){\addtopsstyle{Pulse}{linecolor=blue!50!red!50}\mypulse |
| 12750 |
\rput(-0.7,0){\addtopsstyle{Pulse}{linecolor=blue!50}\mypulse}}}% |
| 12751 |
\end{pspicture} |
| 12752 |
\end{LTXexample} |
| 12753 |
\endgroup |
| 12754 |
|
| 12755 |
\begin{LTXexample}[pos=t, linerange={1-1}, caption={caption}] |
| 12756 |
|
| 12757 |
\begin{pspicture}(-0.5,-0.4)(13,11) |
| 12758 |
\psset{% |
| 12759 |
optboxsize=0.8 0.6, |
| 12760 |
arrowcompsize=0.8 0.5, |
| 12761 |
optmzmsize=0.8 0.6, |
| 12762 |
isolatorsize=0.8 0.5, |
| 12763 |
filtersize=0.6, |
| 12764 |
detsize=0.5 0.6, |
| 12765 |
fiber=none, wire=none, |
| 12766 |
usefiberstyle=false, |
| 12767 |
labeloffset=0.5, labelstyle=\footnotesize |
| 12768 |
} |
| 12769 |
\footnotesize |
| 12770 |
\newpsobject{elecfilter}{optfilter}{usewirestyle} |
| 12771 |
\addtopsstyle{Wire}{arrowscale=1.2, arrows=->, linewidth=1.5\pslinewidth} |
| 12772 |
\newpsstyle{FiberComp}{linecolor=red!80!black} |
| 12773 |
\newpsstyle{Fiber}{style=FiberComp, arrows=->, linewidth=1.5\pslinewidth} |
| 12774 |
\pnode(1,10){Syn}\pnode([Xnodesep=8]Syn){Pm} |
| 12775 |
\elecsynthesizer[compname=Syn, labelalign=t](Syn)(Pm){10\,GHz} |
| 12776 |
\fiberdelayline[compname=Voa1, abspos=2.5, label= 0.6 . t](Syn)(Pm){VOA} |
| 12777 |
\optbox[compname=Am, abspos=4, innerlabel, extnode=b](Syn)(Pm){AM} |
| 12778 |
\fiberdelayline[compname=DelayPm, abspos=5.5, label=0.6 . t](Syn)(Pm){DLY} |
| 12779 |
\optbox[fiber, addtoFiber={arrows=->}, style=FiberComp, label=0, compname=Pm, extnode=t, optboxheight=0.7]([offset=-1]Pm)([offset=1]Pm){PM} |
| 12780 |
\elecsynthesizer[synthtype=rectangle, synthrectwidth=0.3, wire, addtoWire={arrows=->}, label=. -45 l]([offset=-0.5]\oenodeExt{Am})(\oenodeExt{Am}){AWG} |
| 12781 |
\pnode([offset=-0.5, Xnodesep=-1]\oenodeIn{Voa1}){A} |
| 12782 |
\pnode([offset=-1.5]A){B} |
| 12783 |
\eleccoupler[eleccouplertype=directional, eleccouplerinput=right, compname=Cpl](B)(A) |
| 12784 |
\pnode([Xnodesep=-1.2]\oenodeIn{}){EamIn} |
| 12785 |
\pnode([Xnodesep=0.5,offset=-0.3]\oenodeIfc{2}{}){N1} |
| 12786 |
\pnode([offset=-1.3]N1){N2} |
| 12787 |
\optisolator[label=0.4 . r, compname=Iso1](N1)(N2){Isolator} |
| 12788 |
\optarrowcomp[compname=DelayPpg, labelalign=l]([offset=-1.4]N2)(N2){DLY} |
| 12789 |
\fiberbox[position=start, |
| 12790 |
label=0, |
| 12791 |
fiberboxsize=0.7 1, |
| 12792 |
fiberboxcount=2x1, |
| 12793 |
fiberboxsepin=0.2, |
| 12794 |
compname=Ppg]([offset=-0.4]\oenodeIn{DelayPpg})(\oenodeIn{DelayPpg}){PPG} |
| 12795 |
\pnode([offset=-0.5,Xnodesep=-0.5]\oenodeIn{Ppg}){MzmAmp1} |
| 12796 |
\pnode([offset=-0.5,Xnodesep=0.5]\oenodeIfc{2}{Ppg}){MzmAmp2} |
| 12797 |
\pnode([offset=-1.5,Xnodesep=-0.9]MzmAmp1){MzmIn} |
| 12798 |
\pnode([offset=-1.5,Xnodesep=0.9]MzmAmp2){MzmOut} |
| 12799 |
\optamp[abspos=0.5, compname=MzmAmp1](MzmAmp1)(MzmAmp1|MzmIn) |
| 12800 |
\optamp[abspos=0.5, compname=MzmAmp2](MzmAmp2)(MzmAmp2|MzmIn) |
| 12801 |
\optmzm[abspos=0.9, usefiberstyle, style=FiberComp, compname=Mzm1, extnode=t, labelalign=t](MzmIn)(MzmOut){MZM} |
| 12802 |
\optmzm[abspos=2.3, usefiberstyle, style=FiberComp, compname=Mzm2, extnode=t, labelalign=t](MzmIn)(MzmOut){MZM} |
| 12803 |
\rput(\oenodeCenter{Ppg}|[offset=-0.2]\oenodeCenter{MzmAmp1}){AMP} |
| 12804 |
\pnode([Xnodesep=-1]\oenodeIn{Mzm1}){Eam} |
| 12805 |
\optbox[style=FiberComp, |
| 12806 |
label=0, |
| 12807 |
optboxsize=1 0.6, |
| 12808 |
compname=Eam, |
| 12809 |
extnode=t]([Xnodesep=-1]Eam)([Xnodesep=0.8]Eam){EAM} |
| 12810 |
\drawfiber[style=FiberComp, arrows=->]([Xnodesep=-1.2]Eam){Eam}{Mzm1}{Mzm2}(MzmOut) |
| 12811 |
\pnode([Xnodesep=8]N2){N3} |
| 12812 |
\optfilter[abspos=2, label=. 180 b, compname=Bpf1](N2)(N3){\parbox{\widthof{10\,GHz}}{\centering BPF\\[-1pt] 10\,GHz}} |
| 12813 |
\makeatletter\edef\mystart{\the\POE@cnt}\makeatother |
| 12814 |
\optbox[label=0, |
| 12815 |
abspos=3.2, |
| 12816 |
optboxsize=0.6 0.6](N2)(N3){$\div 8$} |
| 12817 |
\makeatletter\edef\mystartb{\the\POE@cnt}\makeatother |
| 12818 |
\optamp[abspos=4.7, label=. 180 b](N2)(N3){AMP} |
| 12819 |
\optbox[label=0, |
| 12820 |
abspos=6, |
| 12821 |
optboxsize=0.6 0.6, |
| 12822 |
compname=Div5](N2)(N3){$\div 5$} |
| 12823 |
\optfilter[abspos=7.3, label=. 180 b](N2)(N3){\parbox{\widthof{250\,MHz}}{\centering BPF\\[-1pt] 250\,MHz}} |
| 12824 |
\pnode([offset=-1]N3){N4} |
| 12825 |
\pnode([offset=-2.4]N4){Mixer} |
| 12826 |
\optamp[abspos=0.4, label=. 0 l global](N4)(Mixer){AMP} |
| 12827 |
\optfilter[innercompalign=abs, |
| 12828 |
filtertype=lowpass, |
| 12829 |
abspos=1.4, |
| 12830 |
compname=Bpf, |
| 12831 |
extnode=t, |
| 12832 |
label=. 0 l global](N4)(Mixer){% |
| 12833 |
\parbox{\widthof{300\,MHz}}{LPF\\[-1pt]300\,MHz}% |
| 12834 |
} |
| 12835 |
\pnode([Xnodesep=-4]Mixer){MixerI} |
| 12836 |
\pnode([offset=-2.5]Mixer){MixerR} |
| 12837 |
\elecmixer[compname=Mixer, elecmixersize=0.7, labelalign=l](Mixer)(MixerR)(MixerI){Mixer} |
| 12838 |
\pnode([Xnodesep=-9.8]MixerR){Menlo} |
| 12839 |
\optbox[position=start, |
| 12840 |
compname=Lo, |
| 12841 |
innerlabel, |
| 12842 |
style=FiberComp](Menlo)(MixerR){LO} |
| 12843 |
\optdetector[extnode=r, |
| 12844 |
labelalign=t, |
| 12845 |
compname=Pd](Menlo)([Xnodesep=0.5]Menlo){\parbox{\widthof{2\,GHz}}{\centering PD\\[-1pt]2\,GHz}} |
| 12846 |
\optfilter[abspos=1.5, labelalign=t, |
| 12847 |
compname=LoBpf](\oenodeExt{Pd})(MixerR){\parbox{\widthof{250\,MHz}}{\centering BPF\\[-1pt]250\,MHz}} |
| 12848 |
\optamp[abspos=3, labelalign=t, |
| 12849 |
compname=LoAmp](\oenodeExt{Pd})(MixerR){AMP} |
| 12850 |
\drawfiber[arrows=->]{Lo}{Pd} |
| 12851 |
\drawwire(\oenodeExt{Pd}){LoBpf}{LoAmp} |
| 12852 |
\drawwire[stopnode=N]{LoAmp}{Mixer} |
| 12853 |
\optfilter[filtertype=lowpass, |
| 12854 |
abspos=1, |
| 12855 |
label=1.1 180 t, |
| 12856 |
compname=LpfP2](MixerI)(\oenodeIfc{2}{Mixer}){% |
| 12857 |
\parbox{\widthof{500\,kHz}}{\centering LPF\\[-1pt]500\,kHz}% |
| 12858 |
} |
| 12859 |
\optfilter[filtertype=lowpass, |
| 12860 |
abspos=2.7, |
| 12861 |
label=1.1 180 t, |
| 12862 |
compname=LpfP1](MixerI)(\oenodeIfc{2}{Mixer}){% |
| 12863 |
\parbox{\widthof{10.7\,MHz}}{\centering LPF\\[-1pt]10.7\,MHz}% |
| 12864 |
} |
| 12865 |
\optbox[compname=T0, |
| 12866 |
extnode=b, |
| 12867 |
position=start, |
| 12868 |
optboxsize=2.2 0.8, |
| 12869 |
innerlabel](MixerI)(\oenodeIfc{2}{Mixer}){$T_0$-Messung} |
| 12870 |
\drawwire[wirealign=center]{Mixer}{LpfP1}{LpfP2}{} |
| 12871 |
\psline[style=Wire](\oenodeExt{T0}|Menlo)(\oenodeExt{T0}) |
| 12872 |
\uput{0.4}[-60](\oenodeExt{T0}){\rput[l](0,0){Takt}} |
| 12873 |
\drawwire[arrows=<-](\oenodeExt{Eam}){Cpl} |
| 12874 |
\drawwire{Syn}{Voa1}{Am}{DelayPm}(\oenodeExt{Pm}) |
| 12875 |
\drawwire{Syn}{Cpl}{Iso1}{DelayPpg}{Ppg}{MzmAmp1}(\oenodeExt{Mzm1}) |
| 12876 |
\drawwire{Ppg}{MzmAmp2}(\oenodeExt{Mzm2}) |
| 12877 |
\drawwire{Iso1}{Bpf1} |
| 12878 |
\multido{\i=\mystart+1,\ii=\mystartb+1}{7}{% |
| 12879 |
\drawwire{\i}{\ii}} |
| 12880 |
\end{pspicture} |
| 12881 |
\end{LTXexample} |
| 12882 |
|
| 12883 |
\begin{LTXexample}[pos=t, caption={caption}] |
| 12884 |
\begin{pspicture}(10,3) |
| 12885 |
\makeatletter |
| 12886 |
\newOptexpTripole{roughsurface} |
| 12887 |
\def\roughsurface@nodes{% |
| 12888 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{A}}{% |
| 12889 |
\code{0 srand} |
| 12890 |
\moveto(!-3 Rand 0.5 sub 0.1 mul) |
| 12891 |
\multido{\r=-2.7+0.3}{20}{% |
| 12892 |
\lineto(!\r\space Rand 0.5 sub 0.1 mul)}% |
| 12893 |
}% |
| 12894 |
\newOptexpComp{% |
| 12895 |
{0 0} tx@IntersectDict /\PIT@name{\oenode@Path{A}} get 0 0 refl {PathIfc} |
| 12896 |
1 }% |
| 12897 |
}% |
| 12898 |
\def\roughsurface@comp{% |
| 12899 |
\pstracecurve{\oenode@Path{A}} |
| 12900 |
}% |
| 12901 |
\makeatother |
| 12902 |
\optplane[angle=90](1,3) |
| 12903 |
\roughsurface(0,3)(5,0)(10,3) |
| 12904 |
\addtopsstyle{Beam}{beamalign=abs, beamangle=-45, arrows=->, arrowscale=2} |
| 12905 |
\multido{\r=0+0.3}{6}{% |
| 12906 |
\drawbeam[beampos=\r]{1}{2}{1}} |
| 12907 |
\end{pspicture} |
| 12908 |
\end{LTXexample} |
| 12909 |
% \iffalse |
| 12910 |
%</ignore> |
| 12911 |
% \fi |
| 12912 |
% |
| 12913 |
% \ifGERMAN\chapter{Zusatzinformationen}\fi |
| 12914 |
% \ifENGLISH\chapter{Additional information}\fi |
| 12915 |
% |
| 12916 |
% \ifENGLISH\section{Internal component structure}\fi |
| 12917 |
% \ifGERMAN\section{Interne Struktur der Komponenten}\fi |
| 12918 |
% |
| 12919 |
% \begin{optionlist} |
| 12920 |
% \boolitem[false]{showifcnodes} |
| 12921 |
% \styleitem[dotstyle=x, dotscale=1.5, linecolor=blue]{IfcNodeStyle} |
| 12922 |
% \end{optionlist} |
| 12923 |
% |
| 12924 |
% \ifENGLISH |
| 12925 |
% Every component consists internally of interfaces which are defined by a node |
| 12926 |
% on the optical axis, a plane vector or a curvature radius, and by its optical |
| 12927 |
% characteristics (reflective or transmittive, or both e.g. for |
| 12928 |
% \Lcomp{beamsplitter}). The interface nodes can be visualized for each component |
| 12929 |
% with the \Lkeyword{showifcnodes} parameter. |
| 12930 |
% \fi |
| 12931 |
% \ifGERMAN |
| 12932 |
% Jede Komponente besteht aus Grenzflächen, die über einen Knoten auf der |
| 12933 |
% optischen Achse, einen Ebenevektor bzw. einen Krümmungsradius, und ihre |
| 12934 |
% optische Eigenschaft (reflektiv oder transmittiv, oder beides für |
| 12935 |
% z.B. \Lcomp{beamsplitter}) definiert ist. Die Grenzflächenknoten können mit |
| 12936 |
% \Lkeyword{showifcnodes} angezeigt werden. |
| 12937 |
% \fi |
| 12938 |
% |
| 12939 |
% \iffalse |
| 12940 |
%<*ignore> |
| 12941 |
% \fi |
| 12942 |
\begin{LTXexample} |
| 12943 |
\begin{pspicture}(4,3) |
| 12944 |
\psset{showifcnodes} |
| 12945 |
\optbox(0,2.5)(4,2.5) |
| 12946 |
\doveprism(0,1.5)(4,1.5) |
| 12947 |
\lens(0,0.5)(4,0.5) |
| 12948 |
\mirror(0,0.5)(3.5,0.5)(3.5,3) |
| 12949 |
\end{pspicture} |
| 12950 |
\end{LTXexample} |
| 12951 |
% \iffalse |
| 12952 |
%</ignore> |
| 12953 |
% \fi |
| 12954 |
% |
| 12955 |
% \medskip |
| 12956 |
% |
| 12957 |
% \ifENGLISH |
| 12958 |
% \nxLcs{draw*beam}\xLcs{drawbeam}\xLcs{drawwidebeam} calculates the distance |
| 12959 |
% between the interface nodes of two components and connects the two nearest |
| 12960 |
% to each other. |
| 12961 |
% \fi |
| 12962 |
% \ifGERMAN |
| 12963 |
% \nxLcs{draw*beam}\xLcs{drawbeam}\xLcs{drawwidebeam} berechnet den Abstand |
| 12964 |
% zwischen den Grenzflächenknoten zweier Komponenten und verbindet die beiden |
| 12965 |
% nächstgelegenen. |
| 12966 |
% \fi |
| 12967 |
% |
| 12968 |
% \iffalse |
| 12969 |
%<*ignore> |
| 12970 |
% \fi |
| 12971 |
\begin{LTXexample} |
| 12972 |
\begin{pspicture}(-3,-3)(3,3) |
| 12973 |
\psset{optboxsize=0.6 0.5, labeloffset=0} |
| 12974 |
\multido{\i=0+60,\ii=1+1}{6}{% |
| 12975 |
\pnode(2.5;\i){A} |
| 12976 |
\optbox([Xnodesep=-1]A)([Xnodesep=1]A){\ii} |
| 12977 |
} |
| 12978 |
\optbox[compname=ref](-1,0)(1,0){ref} |
| 12979 |
\addtopsstyle{Beam}{arrows=->} |
| 12980 |
\multido{\i=1+1}{6}{\drawbeam{ref}{\i}} |
| 12981 |
\end{pspicture} |
| 12982 |
\end{LTXexample} |
| 12983 |
% \iffalse |
| 12984 |
%</ignore> |
| 12985 |
% \fi |
| 12986 |
% |
| 12987 |
% \begin{optionlist} |
| 12988 |
% \boolitem[false]{showinterfaces} |
| 12989 |
% \ifGERMAN Zeigt alle Grenzflächen einer Komponente an.\fi |
| 12990 |
% \ifENGLISH Visualizes all interfaces of a component.\fi |
| 12991 |
% |
| 12992 |
% \iffalse |
| 12993 |
%<*ignore> |
| 12994 |
% \fi |
| 12995 |
\begin{LTXexample} |
| 12996 |
\begin{pspicture}(3,1.5) |
| 12997 |
\psset[optexp]{showinterfaces, aomgratingcount=6} |
| 12998 |
\addtopsstyle{IfcStyle}{linewidth=2\pslinewidth} |
| 12999 |
\pnodes(0,1.5){A}(3,0.5){B}(3,1.5){C} |
| 13000 |
\optaom[aomalign=symmetric](A)(B)(C){symmetric} |
| 13001 |
\addtopsstyle{Beam}{arrows=->, linewidth=4\pslinewidth} |
| 13002 |
\drawbeam[linecolor=red!50](A){}(C) |
| 13003 |
\drawbeam[linecolor=red](A){}(B) |
| 13004 |
\end{pspicture} |
| 13005 |
\end{LTXexample} |
| 13006 |
|
| 13007 |
\begin{LTXexample} |
| 13008 |
\begin{pspicture}(3,1.5) |
| 13009 |
\psset[optexp]{showinterfaces, aomgratingcount=6} |
| 13010 |
\addtopsstyle{IfcStyle}{linewidth=2\pslinewidth} |
| 13011 |
\pnodes(0,1){A}(3,1){B}(3,1.5){C} |
| 13012 |
\optaom[aomalign=straight](A)(B)(C){straight} |
| 13013 |
\addtopsstyle{Beam}{arrows=->, linewidth=4\pslinewidth} |
| 13014 |
\drawbeam[linecolor=red!50](A){}(C) |
| 13015 |
\drawbeam[linecolor=red](A){}(B) |
| 13016 |
\end{pspicture} |
| 13017 |
\end{LTXexample} |
| 13018 |
% \iffalse |
| 13019 |
%</ignore> |
| 13020 |
% \fi |
| 13021 |
% |
| 13022 |
% \styleitem[linestyle=dashed, dash=1pt 1pt, linecolor=red!70!black]{IfcStyle} |
| 13023 |
% \ifGERMAN |
| 13024 |
% Bestimmt das Aussehen der mit \Lkeyword{showinterfaces} angezeigten |
| 13025 |
% Grenzflächen. |
| 13026 |
% \fi |
| 13027 |
% \ifENGLISH |
| 13028 |
% Determines the appearance of the interfaces, which are shown with |
| 13029 |
% \Lkeyword{showinterfaces}. |
| 13030 |
% \fi |
| 13031 |
% \end{optionlist} |
| 13032 |
% |
| 13033 |
% \ifENGLISH\section{Overview of special nodes}\fi |
| 13034 |
% \ifGERMAN\section{Übersicht der Spezialknoten}\fi |
| 13035 |
% |
| 13036 |
% \ifENGLISH In this section you find overviews of all special nodes which |
| 13037 |
% each component provides. The possible positions for external and rotation |
| 13038 |
% reference nodes, and the interface nodes. |
| 13039 |
% \fi |
| 13040 |
% \ifGERMAN |
| 13041 |
% In diesem Abschnitt finden sie Übersichten für alle Spezialknoten, die von |
| 13042 |
% allen Komponenten bereitgestellt werden: die möglichen Positionen für externe |
| 13043 |
% und Rotationsknoten, und die Grenzflächenknoten. |
| 13044 |
% \fi |
| 13045 |
% |
| 13046 |
% \ifENGLISH\subsection{External and rotation reference nodes}\fi |
| 13047 |
% \ifGERMAN\subsection{Externe und Rotationsreferenzknoten}\fi |
| 13048 |
% \label{sec:overview-extnode} |
| 13049 |
% |
| 13050 |
% \ifENGLISH |
| 13051 |
% Here, you find all possible external (\prettyref{sec:extnode}) and rotation |
| 13052 |
% reference nodes (\prettyref{sec:rotrefnode}) for all components. Displayed are |
| 13053 |
% all possible combinations of \opt{t}, \opt{c}, or \opt{b} with \opt{l}, |
| 13054 |
% \opt{c}, or \opt{r}. Not all components support all combinations, e.g. a plain |
| 13055 |
% \Lcomp{mirror} ignores \opt{t} and \opt{b} and an \Lcomp{optplate} ignores \opt{l} |
| 13056 |
% and \opt{r}. |
| 13057 |
% |
| 13058 |
% Instead of these values also fractional parts can be used: \opt{t} |
| 13059 |
% corresponds to $+1\cdot\Delta y$, \opt{b} corresponds to |
| 13060 |
% $-1\cdot\Delta y$, \opt{l} corresponds to $-1\cdot\Delta x$, and |
| 13061 |
% \opt{r} corresponds to $+1\cdot\Delta x$. This can be especially |
| 13062 |
% useful for round outer shapes, as the following examples shows. |
| 13063 |
% \fi |
| 13064 |
% \ifGERMAN |
| 13065 |
% Hier finden Sie eine Übersicht über alle möglichen externen Knoten |
| 13066 |
% (\prettyref{sec:extnode}) und Rotationsknoten (\prettyref{sec:rotrefnode}) |
| 13067 |
% aller Komponenten. Angezeigt werden die Positionen für alle möglichen |
| 13068 |
% Kombinationen von \opt{t}, \opt{c} oder \opt{b} mit \opt{l}, \opt{c} oder |
| 13069 |
% \opt{r}. Es sind nicht immer alle Möglichkeiten vorhanden, so können \opt{t} |
| 13070 |
% und \opt{b} ignoriert werden (z.B. bei \Lcomp{mirror}), oder auch \opt{r} und |
| 13071 |
% \opt{l} (z.B. bei \Lcomp{optplate}). |
| 13072 |
% |
| 13073 |
% Anstelle dieser Werte können auch Bruchteile davon verwendet werden: |
| 13074 |
% \opt{t} entspricht $+1\cdot\Delta y$, \opt{b} entspricht |
| 13075 |
% $-1\cdot\Delta y$, \opt{l} entspricht $-1\cdot\Delta x$ und \opt{r} |
| 13076 |
% entspricht $+1\cdot\Delta x$. Das kann gerade im Fall einer runden |
| 13077 |
% Außenform sehr hilfreich sein, wie das folgende Beispiel zeigt. |
| 13078 |
% \fi |
| 13079 |
% \iffalse |
| 13080 |
%<*ignore> |
| 13081 |
% \fi |
| 13082 |
\begin{LTXexample}[morekeywords={[21]extnode}] |
| 13083 |
\begin{pspicture}(2,1) |
| 13084 |
\elecsynthesizer[extnode={-0.707,0.707}](1,0.5)(2,0.5) |
| 13085 |
\psdot(\oenodeExt{}) |
| 13086 |
\end{pspicture} |
| 13087 |
\end{LTXexample} |
| 13088 |
% \iffalse |
| 13089 |
%</ignore> |
| 13090 |
% \fi |
| 13091 |
% |
| 13092 |
% \newpsstyle{ExtNodeStyle}{dotstyle=B+, dotangle=45, linewidth=2\pslinewidth, linecolor=DOrange} |
| 13093 |
% \makeatletter |
| 13094 |
% \newcommand{\testextnodes}[3][]{% |
| 13095 |
% \begin{pspicture}(3,2.2) |
| 13096 |
% \@nameuse{#2}[#1]#3 |
| 13097 |
% \rput[t](1.5,0.9){\ttfamily\small |
| 13098 |
% \ifx\\#1\\\relax |
| 13099 |
% \begin{tabular}{@{}c@{}}\textbackslash #2\end{tabular} |
| 13100 |
% \else\begin{tabular}{@{}c@{}}\textbackslash #2\\ #1\end{tabular}\fi} |
| 13101 |
% \POE@extnodes[style=ExtNodeStyle,#1]{#2} |
| 13102 |
% \end{pspicture} |
| 13103 |
% }% |
| 13104 |
% \makeatother |
| 13105 |
% |
| 13106 |
% \ifENGLISH\subsubsection*{Free-ray components}\fi |
| 13107 |
% \ifGERMAN\subsubsection*{Freistrahlkomponenten}\fi |
| 13108 |
% |
| 13109 |
% \testextnodes{lens}{(0,1.5)(3,1.5)} |
| 13110 |
% \testextnodes[lensradius=-1]{lens}{(0,1.5)(3,1.5)} |
| 13111 |
% \testextnodes{optplate}{(0,1.5)(3,1.5)} |
| 13112 |
% \testextnodes{optretplate}{(0,1.5)(3,1.5)} |
| 13113 |
% \testextnodes[phwidth=0.2]{pinhole}{(0,1.5)(3,1.5)} |
| 13114 |
% \testextnodes{optbox}{(0,1.5)(3,1.5)} |
| 13115 |
% \testextnodes{crystal}{(0,1.5)(3,1.5)} |
| 13116 |
% \testextnodes{optdetector}{(0,1.5)(2,1.5)} |
| 13117 |
% \testextnodes[dettype=diode]{optdetector}{(0,1.5)(2,1.5)} |
| 13118 |
% \testextnodes{optdiode}{(0,1.5)(3,1.5)} |
| 13119 |
% \testextnodes{doveprism}{(0,1.5)(3,1.5)} |
| 13120 |
% \testextnodes[glanthompsongap=0.15]{glanthompson}{(0,1.5)(3,1.5)} |
| 13121 |
% \bgroup |
| 13122 |
% \addtopsstyle{PiezoMirror}{unit=1.5} |
| 13123 |
% \testextnodes[mirrortype=piezo]{mirror}{(0,1.5)(2,1.5)(2,0)} |
| 13124 |
% \egroup |
| 13125 |
% \bgroup\psset{mirrordepth=0.25} |
| 13126 |
% \testextnodes[mirrortype=extended]{mirror}{(0,1.5)(2,1.5)(2,0)} |
| 13127 |
% \testextnodes{mirror}{(0,1.5)(2,1.5)(2,0)} |
| 13128 |
% \testextnodes[mirrortype=semitrans]{mirror}{(0,1.5)(2,1.5)(2,0)} |
| 13129 |
% \egroup |
| 13130 |
% \testextnodes{optprism}{(0,1.5)(1.5,1.5)(3,1)} |
| 13131 |
% \testextnodes{optgrating}{(0,1.5)(2,1.5)(2,0)} |
| 13132 |
% \testextnodes{beamsplitter}{(0,1.5)(2,1.5)(2,0)} |
| 13133 |
% \testextnodes[bsstyle=plate]{beamsplitter}{(0,1.5)(2,1.5)(2,0)} |
| 13134 |
% \testextnodes{rightangleprism}{(0,1.5)(2.5,1)(0,0.5)} |
| 13135 |
% \testextnodes{pentaprism}{(0,1.3)(2,1.3)(2,0)} |
| 13136 |
% \testextnodes{optarrowcomp}{(0,1.5)(3,1.5)} |
| 13137 |
% \testextnodes{optbarcomp}{(0,1.5)(3,1.5)} |
| 13138 |
% \begin{pspicture}(3,2) |
| 13139 |
% \optdipole[optdipolesize=1](0,1.5)(3,1.5){} |
| 13140 |
% \rput[t](1.5,0.9){\ttfamily\small |
| 13141 |
% \begin{tabular}{@{}c@{}}\textbackslash optdipole\end{tabular}} |
| 13142 |
% \makeatletter |
| 13143 |
% \POE@extnodes[style=ExtNodeStyle, optdipolesize=1]{optdipole} |
| 13144 |
% \makeatother |
| 13145 |
% \end{pspicture} |
| 13146 |
% \begin{pspicture}(3,2) |
| 13147 |
% \transmissiongrating(0,1.5)(1.5,1.5)(3,1) |
| 13148 |
% \rput[t](1.5,0.9){\ttfamily\small |
| 13149 |
% \begin{tabular}{@{}c@{}}\textbackslash transmissiongrating\end{tabular}} |
| 13150 |
% \makeatletter |
| 13151 |
% \POE@extnodes[style=ExtNodeStyle]{transmissiongrating} |
| 13152 |
% \makeatother |
| 13153 |
% \end{pspicture} |
| 13154 |
% |
| 13155 |
% \ifENGLISH\subsubsection*{Fiber components}\fi |
| 13156 |
% \ifGERMAN\subsubsection*{Faserkomponenten}\fi |
| 13157 |
% |
| 13158 |
% \testextnodes{optfiber}{(0,1)(3,1)} |
| 13159 |
% \testextnodes{optamp}{(0,1.5)(3,1.5)} |
| 13160 |
% \testextnodes{optmzm}{(0,1.5)(3,1.5)} |
| 13161 |
% \testextnodes{optfilter}{(0,1.5)(3,1.5)} |
| 13162 |
% \testextnodes{polcontrol}{(0,1.5)(3,1.5)} |
| 13163 |
% \testextnodes{optisolator}{(0,1.5)(3,1.5)} |
| 13164 |
% \testextnodes{optswitch}{(0,1.5)(3,1.5)} |
| 13165 |
% \testextnodes{fiberdelayline}{(0,1.5)(3,1.5)} |
| 13166 |
% \testextnodes{optfiberpolarizer}{(0,1.5)(3,1.5)} |
| 13167 |
% \testextnodes{fibercollimator}{(0,1.5)(3,1.5)} |
| 13168 |
% \testextnodes{optcirculator}{(0,1.6)(3,1.6)(1.5,0.9)} |
| 13169 |
% \testextnodes[couplersize=0.5 0.3]{optcoupler}{(0,2)(0,1)(3,2)(3,1)} |
| 13170 |
% \testextnodes{fiberbox}{(0,1.75)(0,1.25)(3,1.75)(3,1.25)} |
| 13171 |
% |
| 13172 |
% \ifENGLISH\subsubsection*{Electrical components}\fi |
| 13173 |
% \ifGERMAN\subsubsection*{Elektrische Komponenten}\fi |
| 13174 |
% |
| 13175 |
% \testextnodes{eleccoupler}{(0,2)(0,1)(3,2)(3,1)} |
| 13176 |
% \testextnodes{elecmixer}{(0,1.6)(3,1.6)(1.5,0.9)} |
| 13177 |
% \testextnodes{elecsynthesizer}{(1,1.5)(3,1.5)} |
| 13178 |
% |
| 13179 |
% |
| 13180 |
% \ifENGLISH\subsection{Interface nodes}\fi |
| 13181 |
% \ifGERMAN\subsection{Grenzflächenknoten}\fi |
| 13182 |
% \label{sec:overview-ifcnode} |
| 13183 |
% |
| 13184 |
% \ifENGLISH |
| 13185 |
% Here, all available components and their interface nodes are listed. If |
| 13186 |
% a node is labeled as «1, N», it means that both nodes are equal. |
| 13187 |
% \fi |
| 13188 |
% \ifGERMAN Hier sind alle Komponenten und deren Grenzflächenknoten |
| 13189 |
% aufgelistet. Ist ein Knoten mit «1, N» beschriftet, dann fallen beide |
| 13190 |
% Knoten zusammen. |
| 13191 |
% \fi |
| 13192 |
% |
| 13193 |
% \ifENGLISH\subsubsection*{Free-ray components}\fi |
| 13194 |
% \ifGERMAN\subsubsection*{Freistrahlkomponenten}\fi |
| 13195 |
% |
| 13196 |
% \begingroup |
| 13197 |
% \addtopsstyle{Beam}{arrows=->, arrowinset=0, arrowscale=1.5} |
| 13198 |
% \newcommand{\showdipoleifc}[1]{% |
| 13199 |
% \begin{pspicture}(0,-0.5)(3,1) |
| 13200 |
% \pnode(0,0.5){A}\pnode(3,0.5){B} |
| 13201 |
% \csname #1\endcsname(A)(B) |
| 13202 |
% \drawbeam(A){}(B) |
| 13203 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1} |
| 13204 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13205 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash #1} |
| 13206 |
% \end{pspicture} |
| 13207 |
% }% |
| 13208 |
% \newcommand{\showdipoleoneifc}[1]{% |
| 13209 |
% \begin{pspicture}(0,-0.5)(3,1) |
| 13210 |
% \pnode(0,0.5){A}\pnode(3,0.5){B} |
| 13211 |
% \csname #1\endcsname(A)(B) |
| 13212 |
% \drawbeam(A){}(B) |
| 13213 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1, N} |
| 13214 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash #1} |
| 13215 |
% \end{pspicture} |
| 13216 |
% }% |
| 13217 |
% \showdipoleifc{lens}\hspace{\fill}% |
| 13218 |
% \showdipoleoneifc{optplate}\hspace{\fill}% |
| 13219 |
% \showdipoleifc{optretplate}% |
| 13220 |
% \bigskip |
| 13221 |
% |
| 13222 |
% \noindent\showdipoleoneifc{pinhole}\hspace{\fill}% |
| 13223 |
% \showdipoleifc{optbox}\hspace{\fill}% |
| 13224 |
% \showdipoleifc{crystal} |
| 13225 |
% \bigskip |
| 13226 |
% |
| 13227 |
% \noindent |
| 13228 |
% \begin{pspicture}(0, -0.5)(3,1) |
| 13229 |
% \pnode(0,0.5){A}\pnode(2,0.5){B} |
| 13230 |
% \optdetector(A)(B) |
| 13231 |
% \drawbeam(A){} |
| 13232 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1} |
| 13233 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13234 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash optdetector} |
| 13235 |
% \end{pspicture}% |
| 13236 |
% \hspace{\fill}% |
| 13237 |
% \bgroup |
| 13238 |
% \addtopsstyle{Beam}{beaminside=false}% |
| 13239 |
% \showdipoleifc{optdiode}\egroup% |
| 13240 |
% \hspace{\fill}% |
| 13241 |
% \begin{pspicture}(0,-0.5)(3,1) |
| 13242 |
% \pnode(0,0.5){A}\pnode(3,0.5){B} |
| 13243 |
% \doveprism(A)(B) |
| 13244 |
% \drawbeam[raytrace=false](A){}(B) |
| 13245 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13246 |
% \psdot(\oenodeIfc{2}{})\uput[90](\oenodeIfc{2}{}){2} |
| 13247 |
% \psdot(\oenodeOut{})\uput[45](\oenodeOut{}){N} |
| 13248 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash doveprism} |
| 13249 |
% \end{pspicture}% |
| 13250 |
% |
| 13251 |
% \begin{pspicture}(3,1.5) |
| 13252 |
% \pnode(0,1){A}\pnode(2.5,1){B}\pnode(2.5,0){C} |
| 13253 |
% \mirror(A)(B)(C) |
| 13254 |
% \drawbeam(A){}(C) |
| 13255 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1, N} |
| 13256 |
% \rput[bl](0,0){\ttfamily\textbackslash mirror} |
| 13257 |
% \end{pspicture}% |
| 13258 |
% \hspace{\fill}% |
| 13259 |
% \begin{pspicture}(3,1.5) |
| 13260 |
% \pnode(0,1){A}\pnode(1.5,1){B}\pnode(3,0){C} |
| 13261 |
% \optprism(A)(B)(C) |
| 13262 |
% \drawbeam[raytrace=false](A){}(C) |
| 13263 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13264 |
% \psdot(\oenodeOut{})\uput[45](\oenodeOut{}){N} |
| 13265 |
% \rput[bl](0,0){\ttfamily\textbackslash optprism} |
| 13266 |
% \end{pspicture}% |
| 13267 |
% \hspace{\fill}% |
| 13268 |
% \begin{pspicture}(3,1.5) |
| 13269 |
% \pnode(0,1.5){A}\pnode(1.5,1){B}\pnode(3,1.5){C} |
| 13270 |
% \optprism[prismtype=reflective](A)(B)(C) |
| 13271 |
% \drawbeam[raytrace=false](A){}(C) |
| 13272 |
% \psdot(\oenodeIn{})\uput[110](\oenodeIn{}){1} |
| 13273 |
% \psdot(\oenodeOut{})\uput[70](\oenodeOut{}){N} |
| 13274 |
% \psdot(\oenodeIfc{2}{})\uput[90](\oenodeIfc{2}{}){2} |
| 13275 |
% \rput[tl](0,0.42){\ttfamily\begin{tabular}{@{}l@{}}\textbackslash optprism\\prismtype=reflective\end{tabular}} |
| 13276 |
% \end{pspicture}% |
| 13277 |
% |
| 13278 |
% \begin{pspicture}(3,1.5) |
| 13279 |
% \pnode(0,1){A}\pnode(2.5,1){B}\pnode(2.5,0){C} |
| 13280 |
% \optgrating(A)(B)(C) |
| 13281 |
% \drawbeam(A){}(C) |
| 13282 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1, N} |
| 13283 |
% \rput[bl](0,0){\ttfamily\textbackslash optgrating} |
| 13284 |
% \end{pspicture}% |
| 13285 |
% \hspace{\fill}% |
| 13286 |
% \begin{pspicture}(0,-0.5)(3,1.7) |
| 13287 |
% \pnode(0,0.7){A}\pnode(3,0.7){B} |
| 13288 |
% \glanthompson[glanthompsonsize=1.8 1, glanthompsongap=0.2](A)(B) |
| 13289 |
% \drawbeam(A){}(B) |
| 13290 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13291 |
% \psdot(\oenodeIfc{2}{})\uput[45](\oenodeIfc{2}{}){2} |
| 13292 |
% \psdot(\oenodeIfc{3}{})\uput[30](\oenodeIfc{3}{}){3,C} |
| 13293 |
% \psdot(\oenodeIfc{4}{})\uput[150](\oenodeIfc{4}{}){4} |
| 13294 |
% \psdot(\oenodeOut{})\uput[45](\oenodeOut{}){N} |
| 13295 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash glanthompson} |
| 13296 |
% \end{pspicture}% |
| 13297 |
% \hspace{\fill}% |
| 13298 |
% \showdipoleifc{optarrowcomp}% |
| 13299 |
% |
| 13300 |
% \showdipoleifc{optbarcomp}\hspace{\fill}% |
| 13301 |
% \begin{pspicture}(0,-0.5)(3,1.7) |
| 13302 |
% \pnode(0,0.7){A}\pnode(3,0.7){B} |
| 13303 |
% \optdipole[optdipolesize=1](A)(B){} |
| 13304 |
% \drawbeam(A){}(B) |
| 13305 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13306 |
% \psdot(\oenodeOut{})\uput[45](\oenodeOut{}){N} |
| 13307 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash optdipole} |
| 13308 |
% \end{pspicture}% |
| 13309 |
% \hspace{\fill}% |
| 13310 |
% \begin{pspicture}(0,-0.5)(3,1.7) |
| 13311 |
% \pnode(0,0.7){A}\pnode(1.5,0.7){B}\pnode(3,0.4){C} |
| 13312 |
% \transmissiongrating(A)(B)(C) |
| 13313 |
% \drawbeam(A){}(C) |
| 13314 |
% \psdot(\oenodeIn{})\uput[45](\oenodeIn{}){1, N} |
| 13315 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash transmissiongrating} |
| 13316 |
% \end{pspicture}% |
| 13317 |
% |
| 13318 |
% \noindent\begin{pspicture}(3,2.5) |
| 13319 |
% \pnode(0,1.5){A}\pnode(2.5,1.5){B}\pnode(2.5,0.4){C} |
| 13320 |
% \beamsplitter[bssize=1.2](A)(B)(C) |
| 13321 |
% \drawbeam(A){}(C) |
| 13322 |
% \psdot(\oenodeIfc{1}{})\uput[135](\oenodeIfc{1}{}){1} |
| 13323 |
% \psdot(\oenodeIfc{2}{})\uput[-45](\oenodeIfc{2}{}){2} |
| 13324 |
% \psdot(\oenodeIfc{3}{})\uput[60](\oenodeIfc{3}{}){3,C} |
| 13325 |
% \psdot(\oenodeIfc{4}{})\uput[0](\oenodeIfc{4}{}){4} |
| 13326 |
% \psdot(\oenodeIfc{N}{})\uput[90](\oenodeIfc{N}{}){N} |
| 13327 |
% \rput[bl](0,0){\ttfamily\textbackslash beamsplitter} |
| 13328 |
% \end{pspicture}% |
| 13329 |
% \hspace{\fill}% |
| 13330 |
% \begin{pspicture}(3,2.5) |
| 13331 |
% \pnode(0,2){A}\pnode(2.5,1.5){B}\pnode(0,1){C} |
| 13332 |
% \rightangleprism[raprismsize=2](A)(B)(C) |
| 13333 |
% \drawbeam[arrows=->, arrowinset=0, arrowscale=1.5](A){}(C) |
| 13334 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13335 |
% \psdot(\oenodeIfc{2}{})\uput[45](\oenodeIfc{2}{}){2} |
| 13336 |
% \psdot(\oenodeIfc{3}{})\uput[-45](\oenodeIfc{3}{}){3} |
| 13337 |
% \psdot(\oenodeOut{})\uput[-135](\oenodeOut{}){N} |
| 13338 |
% \rput[bl](0,0){\ttfamily\textbackslash rightangleprism} |
| 13339 |
% \end{pspicture}% |
| 13340 |
% \hspace{\fill}% |
| 13341 |
% \begin{pspicture}(3,2.5) |
| 13342 |
% \pnode(0,1.5){A}\pnode(2.1,1.5){B}\pnode(2.1,0.4){C} |
| 13343 |
% \pentaprism[pentaprismsize=1](A)(B)(C) |
| 13344 |
% \drawbeam[arrows=->, arrowinset=0, arrowscale=1.5](A){}(C) |
| 13345 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13346 |
% \psdot(\oenodeIfc{2}{})\uput[0](\oenodeIfc{2}{}){2} |
| 13347 |
% \psdot(\oenodeIfc{3}{})\uput[90](\oenodeIfc{3}{}){3} |
| 13348 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13349 |
% \rput[bl](0,0){\ttfamily\textbackslash pentaprism} |
| 13350 |
% \end{pspicture}% |
| 13351 |
% \endgroup |
| 13352 |
% |
| 13353 |
% \ifENGLISH\subsubsection*{Fiber components}\fi |
| 13354 |
% \ifGERMAN\subsubsection*{Faserkomponenten}\fi |
| 13355 |
% |
| 13356 |
% \newcommand{\showfdipoleifc}[1]{% |
| 13357 |
% \begin{pspicture}(0,-0.5)(3,1) |
| 13358 |
% \pnode(0,0.5){A}\pnode(3,0.5){B} |
| 13359 |
% \csname #1\endcsname(A)(B) |
| 13360 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1} |
| 13361 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13362 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash #1} |
| 13363 |
% \end{pspicture}% |
| 13364 |
% }% |
| 13365 |
% \begingroup |
| 13366 |
% \addtopsstyle{Fiber}{ArrowInside=->, ArrowInsidePos=0.6, arrowscale=1.5, arrowinset=0} |
| 13367 |
% \vspace*{5mm}% |
| 13368 |
% \showfdipoleifc{optfiber}\hspace{\fill}% |
| 13369 |
% \showfdipoleifc{optamp}\hspace{\fill}% |
| 13370 |
% \showfdipoleifc{optmzm}% |
| 13371 |
% \bigskip |
| 13372 |
% |
| 13373 |
% \noindent\showfdipoleifc{optfilter}\hspace{\fill}% |
| 13374 |
% \showfdipoleifc{polcontrol}\hspace{\fill}% |
| 13375 |
% \showfdipoleifc{optisolator}% |
| 13376 |
% \bigskip |
| 13377 |
% |
| 13378 |
% \noindent\showfdipoleifc{optswitch}\hspace{\fill}% |
| 13379 |
% \showfdipoleifc{fiberdelayline}\hspace{\fill}% |
| 13380 |
% \showfdipoleifc{optfiberpolarizer}% |
| 13381 |
% \bigskip |
| 13382 |
% |
| 13383 |
% \bgroup\psset{beam} |
| 13384 |
% \noindent\showfdipoleifc{fibercollimator}\egroup |
| 13385 |
% \hspace{\fill}% |
| 13386 |
% \begin{pspicture}(0,-0.5)(3,1.5) |
| 13387 |
% \pnode(0,1){A}\pnode(3,1){B}\pnode(1.2,-0.1){C} |
| 13388 |
% \optcirculator(A)(B)(C) |
| 13389 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1} |
| 13390 |
% \psdot(\oenodeIfc{2}{})\uput[-45](\oenodeIfc{2}{}){2} |
| 13391 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13392 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash optcirculator} |
| 13393 |
% \end{pspicture}\hspace{\fill}% |
| 13394 |
% \begin{pspicture}(0,-0.5)(3,1.5) |
| 13395 |
% \fiberbox[fiberboxcount=2x3](0,0.95)(0,0.45)(3,1.2)(3,0.2) |
| 13396 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13397 |
% \psdot(\oenodeIfc{2}{})\uput[-135](\oenodeIfc{2}{}){2} |
| 13398 |
% \psdot(\oenodeIfc{3}{})\uput[45](\oenodeIfc{3}{}){3} |
| 13399 |
% \psdot(\oenodeIfc{4}{})\uput[0](\oenodeIfc{4}{}){4} |
| 13400 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13401 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash fiberbox} |
| 13402 |
% \end{pspicture} |
| 13403 |
% \bigskip |
| 13404 |
% |
| 13405 |
% \noindent |
| 13406 |
% \begin{pspicture}(0,-0.5)(3,1.5) |
| 13407 |
% \pnode(0,0.75){A}\pnode(3,1.5){B}\pnode(3,0){C} |
| 13408 |
% \wdmsplitter[couplersize=0.5, couplersep=0.2](A)(B)(C) |
| 13409 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13410 |
% \psdot(\oenodeIfc{2}{})\uput[90](\oenodeIfc{2}{}){2} |
| 13411 |
% \psdot(\oenodeOut{})\uput[-90](\oenodeOut{}){N} |
| 13412 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash wdmsplitter} |
| 13413 |
% \end{pspicture}% |
| 13414 |
% \hspace{\fill}% |
| 13415 |
% \begin{pspicture}(0,-0.5)(3,1.5) |
| 13416 |
% \pnode(0,1.5){A}\pnode(0,0){B}\pnode(3,0.75){C} |
| 13417 |
% \wdmcoupler[couplersize=0.5, couplersep=0.2](A)(B)(C) |
| 13418 |
% \psdot(\oenodeIn{})\uput[90](\oenodeIn{}){1} |
| 13419 |
% \psdot(\oenodeIfc{2}{})\uput[-90](\oenodeIfc{2}{}){2} |
| 13420 |
% \psdot(\oenodeOut{})\uput[45](\oenodeOut{}){N} |
| 13421 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash wdmcoupler} |
| 13422 |
% \end{pspicture}% |
| 13423 |
% \hspace{\fill}% |
| 13424 |
% \begin{pspicture}(0,-0.5)(3,1.5) |
| 13425 |
% \pnode(0,1.5){A}\pnode(0,0){B}\pnode(3,1.5){C}\pnode(3,0){D} |
| 13426 |
% \optcoupler[couplersize=0.5, couplersep=0.2](A)(B)(C)(D) |
| 13427 |
% \psdot(\oenodeIn{})\uput[90](\oenodeIn{}){1} |
| 13428 |
% \psdot(\oenodeIfc{2}{})\uput[-90](\oenodeIfc{2}{}){2} |
| 13429 |
% \psdot(\oenodeIfc{3}{})\uput[90](\oenodeIfc{3}{}){3} |
| 13430 |
% \psdot(\oenodeOut{})\uput[-90](\oenodeOut{}){N} |
| 13431 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash optcoupler} |
| 13432 |
% \end{pspicture}% |
| 13433 |
% \endgroup |
| 13434 |
% |
| 13435 |
% |
| 13436 |
% \ifENGLISH\subsubsection*{Electrical components}\fi |
| 13437 |
% \ifGERMAN\subsubsection*{Elektrische Komponenten}\fi |
| 13438 |
% \begingroup |
| 13439 |
% \addtopsstyle{Wire}{arrows=->, arrowscale=1.5, arrowinset=0, arm=0.6} |
| 13440 |
% \noindent\begin{pspicture}(0, -0.5)(3,1.7) |
| 13441 |
% \pnode(2,1.2){A}\pnode(3,1.2){B} |
| 13442 |
% \elecsynthesizer(A)(B) |
| 13443 |
% \psdot(\oenodeIn{})\uput[135](\oenodeIn{}){1} |
| 13444 |
% \psdot(\oenodeOut{})\uput[45](\oenodeOut{}){N} |
| 13445 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash elecsynthesizer} |
| 13446 |
% \end{pspicture}\hspace{\fill}% |
| 13447 |
% \begin{pspicture}(0,-0.5)(3,1.7) |
| 13448 |
% \pnode(0,1.2){A}\pnode(3,1.2){B}\pnode(1.2,0.1){C} |
| 13449 |
% \elecmixer(A)(B)(C) |
| 13450 |
% \psdot(\oenodeIn{})\uput[-135](\oenodeIn{}){1} |
| 13451 |
% \psdot(\oenodeIfc{2}{})\uput[-45](\oenodeIfc{2}{}){2} |
| 13452 |
% \psdot(\oenodeOut{})\uput[-45](\oenodeOut{}){N} |
| 13453 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash elecmixer} |
| 13454 |
% \end{pspicture}\hspace{\fill}% |
| 13455 |
% \begin{pspicture}(0,-0.5)(3,1.7) |
| 13456 |
% \pnode(0,1.7){A}\pnode(0,0.2){B}\pnode(3,1.7){C}\pnode(3,0.2){D} |
| 13457 |
% \eleccoupler(A)(B)(C)(D) |
| 13458 |
% \psdot(\oenodeIn{})\uput[120](\oenodeIn{}){1} |
| 13459 |
% \psdot(\oenodeIfc{2}{})\uput[-120](\oenodeIfc{2}{}){2} |
| 13460 |
% \psdot(\oenodeIfc{3}{})\uput[60](\oenodeIfc{3}{}){3} |
| 13461 |
% \psdot(\oenodeOut{})\uput[-60](\oenodeOut{}){N} |
| 13462 |
% \rput[bl](0,-0.4){\ttfamily\textbackslash eleccoupler} |
| 13463 |
% \end{pspicture}% |
| 13464 |
% \endgroup |
| 13465 |
% |
| 13466 |
% \ifGERMAN |
| 13467 |
% \section{Abwärtskompatibilität} |
| 13468 |
% \fi |
| 13469 |
% \ifENGLISH |
| 13470 |
% \section{Backward compatibility} |
| 13471 |
% \fi\label{sec:bwd-comp} |
| 13472 |
% |
| 13473 |
% \ifENGLISH In this section you find a comprehensive listing of the behaviour |
| 13474 |
% which changed in a version compared to the previous one and which is not |
| 13475 |
% backward compatible. Here you find also information on what you must note when |
| 13476 |
% upgrading and how you must change old documents to work correctly with the |
| 13477 |
% newer version. |
| 13478 |
% \fi |
| 13479 |
% \ifGERMAN |
| 13480 |
% In diesem Abschnitt finden Sie eine umfangreiche Auflistung aller Änderungen |
| 13481 |
% in einer Version bezüglich der Vorgängerversion, die nicht abwärts kompatibel |
| 13482 |
% sind. Sie finden ebenfalls Informationen was Sie bei einem Wechsel zur neuen |
| 13483 |
% Version beachten müssen, und was sie bei älteren Dokumenten gegebenenfalls |
| 13484 |
% ändern müssen um mit der neuen Version korrekt zu funktionieren. \fi |
| 13485 |
% |
| 13486 |
% |
| 13487 |
% \subsection{Version 4.3a}\label{sec:bwd-comp-4.3a} |
| 13488 |
% |
| 13489 |
% \begin{optionlist} |
| 13490 |
% \poeitem{prismtype} |
| 13491 |
% \ifGERMAN Die Option \Lkeyword{prismtype} war immer noch |
| 13492 |
% «zusammengeschustert» und die automatische Positionierung war recht |
| 13493 |
% willkürlich. Dies sollte nun endlich korrigiert sein, unter |
| 13494 |
% Option \Lkeyword{prismalign} ist ein entsprechendes Beispiel zu sehen. |
| 13495 |
% \fi |
| 13496 |
% \ifENGLISH The option \Lkeyword{prismtype} was still not correctly |
| 13497 |
% implemented, die automatic alignment was somewhat arbitrary. This |
| 13498 |
% should be finally fixed, an example is shown for option |
| 13499 |
% \Lkeyword{prismalign}. |
| 13500 |
% \fi |
| 13501 |
% |
| 13502 |
% \poeitem{\cs{optprism}} |
| 13503 |
% \ifGERMAN Die Positionierung der Beschriftung war nicht konsistent mit |
| 13504 |
% anderen Komponenten, der Bezugspunkt war nicht der Mittelpunkt und |
| 13505 |
% auch nicht fest. Das ist jetzt behoben, könnte aber leichte |
| 13506 |
% Korrekturen an bestehenden Skizzen erfordern. |
| 13507 |
% \fi |
| 13508 |
% \ifENGLISH The positioning of the label was not consistent with other |
| 13509 |
% components, the reference point was not the center point and did also |
| 13510 |
% depend on the component rotation. This is fixed now, but could mean |
| 13511 |
% little corrections for existing images. |
| 13512 |
% \fi |
| 13513 |
% |
| 13514 |
% \end{optionlist} |
| 13515 |
% |
| 13516 |
% \subsection{Version 4.3}\label{sec:bwd-comp-4.3} |
| 13517 |
% |
| 13518 |
% \begin{optionlist} |
| 13519 |
% \poeitem{\cs{rightangleprism}} |
| 13520 |
% \ifGERMAN Die Ausrichtung des \Lcomp{rightangleprism} und die |
| 13521 |
% Positionierung der Beschriftung war falsch. Das kommt aber nur zum |
| 13522 |
% tragen, wenn Eingangs- und Ausgangsvektor sehr unterschiedliche Längen |
| 13523 |
% haben. |
| 13524 |
% \fi |
| 13525 |
% \ifENGLISH The alignment of the \Lcomp{rightangleprism} and the |
| 13526 |
% positioning of the label was wrong. This became apparent only if the |
| 13527 |
% input and output vectors had very different lenghts. |
| 13528 |
% \fi |
| 13529 |
% \end{optionlist} |
| 13530 |
% |
| 13531 |
% \subsection{Version 4.2}\label{sec:bwd-comp-4.2} |
| 13532 |
% |
| 13533 |
% \begin{optionlist} |
| 13534 |
% \poeitem{prismtype} |
| 13535 |
% \ifGERMAN |
| 13536 |
% Die in Version 4.1 eingeführte Option \Lkeyword{prismtype} benötigte |
| 13537 |
% immer eine zusätzliche Drehung der Komponente um 180\textdegree. Das |
| 13538 |
% entfällt nun, da die Komponentenausrichtung korrigiert wurde, |
| 13539 |
% erfordert aber gegebenenfalls eine Korrektur von Skizzen, die mit |
| 13540 |
% Version 4.1 erstellt wurden. |
| 13541 |
% \fi |
| 13542 |
% \ifENGLISH |
| 13543 |
% The option \Lkeyword{prismtype}, introduced in version 4.1, always |
| 13544 |
% needed an additional angle rotation of 180\textdegree. This is not |
| 13545 |
% necessary anymore, the component behavior was corrected, but this may |
| 13546 |
% require adjustment of drawings created with version 4.1. |
| 13547 |
% \fi |
| 13548 |
% \end{optionlist} |
| 13549 |
% |
| 13550 |
% \subsection{Version 4.0}\label{sec:bwd-comp-4.0} |
| 13551 |
% |
| 13552 |
% \ifGERMAN Die Option \Lkeyword*{conn} und das alte, fehlerhafte |
| 13553 |
% Verfahren Strahlverbindungen zu zeichnen, wurde nun entfernt. Zur |
| 13554 |
% Migration älterer Dokumente siehe |
| 13555 |
% \prettyref{sec:bwd-comp-3.0-conn}. Damit wurde auch die Option |
| 13556 |
% \Lkeyword*{connjoin} überflüssig und wurde entfernt. |
| 13557 |
% \fi |
| 13558 |
% \ifENGLISH The option \Lkeyword*{conn} and the old, buggy code for beam |
| 13559 |
% connections was finally removed. To update older documents, see |
| 13560 |
% \prettyref{sec:bwd-comp-3.0-conn}. With this change also option |
| 13561 |
% \Lkeyword*{connjoin} became useless. |
| 13562 |
% \fi |
| 13563 |
% |
| 13564 |
% \ifENGLISH |
| 13565 |
% The appearance of \Lcomp{optfiber} changed slightly, because the old |
| 13566 |
% implementation was buggy and the separation between the loops depended |
| 13567 |
% on the number of loops (see example below). Note, that to achieve a |
| 13568 |
% similar default look, the default value for \Lkeyword{fiberloopsep} |
| 13569 |
% was changed from 0.3 to 0.2. Therefore, the interface nodes are a bit |
| 13570 |
% closer together. |
| 13571 |
% \fi |
| 13572 |
% \ifGERMAN |
| 13573 |
% Das Aussehen von \Lcomp{optfiber} hat sich etwas geändert, da in der |
| 13574 |
% vorherigen Implementierung der Abstand zwischen zwei Schleifen von der |
| 13575 |
% Anzahl der Schleifen abhing (siehe das Beispiel unten). Beachten Sie, |
| 13576 |
% dass die Voreinstellung für \Lkeyword{fiberloopsep} von 0.3 auf 0.2 |
| 13577 |
% geändert wurde um ein ähnliches Aussehen bei Verwendung der |
| 13578 |
% Voreinstellungen zu erhalten. Dadurch sitzen die Eingangs- und |
| 13579 |
% Ausgangsknoten jedoch etwas näher zusammen (siehe unten). |
| 13580 |
% \fi |
| 13581 |
% |
| 13582 |
% \makeatletter |
| 13583 |
% \begin{pspicture}[showgrid](0,-0.3)(6,1.4) |
| 13584 |
% \newOptexpFiberDipole{optfiber@old} |
| 13585 |
% \def\optfiber@old@ref{% |
| 13586 |
% \POE@setref{/@@x 0.3 \POE@key@fiberloops\space 1 sub mul 0.5 mul def }% |
| 13587 |
% }% |
| 13588 |
% \def\optfiber@old@nodes{% |
| 13589 |
% \newOptexpFiberComp{{@@x neg 0} {@@x 0}}% |
| 13590 |
% \ignorespaces}% |
| 13591 |
% \def\optfiber@old@comp{% |
| 13592 |
% \edef\@f@cnt{\POE@key@fiberloops\space}% |
| 13593 |
% \edef\@f@r{0.4 }% |
| 13594 |
% \edef\@f@sep{0.3 }% |
| 13595 |
% \parametricplot[plotpoints=200, style=Fiber]{0}{1}{% |
| 13596 |
% t 360 mul \@f@cnt mul sin \@f@r mul \@f@sep |
| 13597 |
% \@f@cnt 1 sub mul t 0.5 sub mul add |
| 13598 |
% 1 t 360 mul \@f@cnt mul cos sub \@f@r mul |
| 13599 |
% }% |
| 13600 |
% \ignorespaces}% |
| 13601 |
% \psset[optexp]{label=0.5 . b, showifcnodes} |
| 13602 |
% \optfiber@old[fiberloops=2](0,0.5)(2,0.5) |
| 13603 |
% \optfiber@old[fiberloops=3](2,0.5)(4,0.5){old} |
| 13604 |
% \optfiber@old[fiberloops=4](4,0.5)(6,0.5) |
| 13605 |
% \end{pspicture} |
| 13606 |
% \makeatother |
| 13607 |
% \hspace{\fill} |
| 13608 |
% \begin{pspicture}[showgrid](0,-0.3)(6,1.4) |
| 13609 |
% \psset[optexp]{label=0.5 . b, showifcnodes} |
| 13610 |
% \optfiber[fiberloops=2](0,0.5)(2,0.5) |
| 13611 |
% \optfiber[fiberloops=3](2,0.5)(4,0.5){new} |
| 13612 |
% \optfiber[fiberloops=4](4,0.5)(6,0.5) |
| 13613 |
% \end{pspicture} |
| 13614 |
% |
| 13615 |
% \ifGERMAN Das Makro \Lcs*{newOptexpDipoleNolabel} wurde entfernt und |
| 13616 |
% kann ohne weitere Änderungen durch \Lcs{newOptexpDipole} ersetzt werden. |
| 13617 |
% \fi |
| 13618 |
% \ifENGLISH The macro \Lcs*{newOptexpDipoleNolabel} was removed and can |
| 13619 |
% be replaced by \Lcs{newOptexpDipole} without any further changes. |
| 13620 |
% \fi |
| 13621 |
% |
| 13622 |
% \ifGERMAN The alte Syntax mit \nxLcs{mycomp@iii} zur Definition eigener |
| 13623 |
% Komponenten wird nicht mehr unterstützt. |
| 13624 |
% \fi |
| 13625 |
% \ifENGLISH The old syntax of defining own components with |
| 13626 |
% \nxLcs{mycomp@iii} is not supported anymore. |
| 13627 |
% \fi |
| 13628 |
% |
| 13629 |
% \subsection{Version 3.3}\label{sec:bwd-comp-3.3} |
| 13630 |
% |
| 13631 |
% \begin{optionlist} |
| 13632 |
% \poeitem{\textbackslash opttripole} |
| 13633 |
% \ifGERMAN Der Ausgangswinkel für die Beschriftung des |
| 13634 |
% \Lcomp{opttripole} wurde um 180° geändert um konsistent zu den anderen |
| 13635 |
% Dreipolen zu sein. |
| 13636 |
% \fi |
| 13637 |
% \ifENGLISH Changed the reference angle for the label of the |
| 13638 |
% \Lcomp{opttripole} to be consistent with the other tripoles. |
| 13639 |
% \fi |
| 13640 |
% \end{optionlist} |
| 13641 |
% |
| 13642 |
% \ifGERMAN\subsubsection{Strahlknoten}\fi |
| 13643 |
% \ifENGLISH\subsubsection{Beam nodes}\fi |
| 13644 |
% |
| 13645 |
% \ifGERMAN Vor Version 3.3 sind the Strahlknoten \Lcs{oenodeBeamUp} und |
| 13646 |
% \Lcs{oenodeBeamLow} nicht korrekt ausgerichtet gewesen, «upper» und |
| 13647 |
% «lower» war immer relativ zur Strahlrichtung (analog zu |
| 13648 |
% \Lkeyword{extnodealign}\opt{=relative}). |
| 13649 |
% |
| 13650 |
% Das konnte zu Problemen führen wenn \Lkeyword{loadbeampoints} zusammen |
| 13651 |
% mit \Lkeyword{beamdiv} verwendet wurde, da das Vorzeichen von |
| 13652 |
% \Lkeyword{beamdiv} nicht eindeutig kontrahierenden bzw. expandierenden |
| 13653 |
% Strahlen zugeordnet war. |
| 13654 |
% |
| 13655 |
% Seit Version 3.3 werden die Strahlknoten analog zu |
| 13656 |
% \Lkeyword{extnodealign}\opt{=absolute} definiert und die Zuordnung |
| 13657 |
% eines negativen \Lkeyword{beamdiv} mit kontrahierenden Strahlen sowie |
| 13658 |
% positiven \Lkeyword{beamdiv} mit expandierenden Strahlen ist immer |
| 13659 |
% gültig. In den folgenden beiden Beispielen ist immer der |
| 13660 |
% \Lcs{oenodeBeamUp} gekennzeichnet. |
| 13661 |
% \fi |
| 13662 |
% \ifENGLISH Before version 3.3 the beam nodes |
| 13663 |
% \Lcs{oenodeBeamUp} and \Lcs{oenodeBeamLow} were not swapped correctly |
| 13664 |
% and the orientation of «upper» and «lower» was only relative to the |
| 13665 |
% beam direction (equivalent to |
| 13666 |
% \Lkeyword{extnodealign}\opt{=relative}). |
| 13667 |
% |
| 13668 |
% This could lead to problems when using \Lkeyword{loadbeampoints} with |
| 13669 |
% \Lkeyword{beamdiv}. In that case the sign of \Lkeyword{beamdiv} was |
| 13670 |
% not unambiguously associated with contracting or expanding beam. |
| 13671 |
% |
| 13672 |
% As of version 3.3 the beam nodes are arranged according to |
| 13673 |
% \Lkeyword{extnodealign}\opt{=absolute} and the association of negative |
| 13674 |
% \Lkeyword{beamdiv} with a contracting and positive \Lkeyword{beamdiv} |
| 13675 |
% with an expanding beam is always valid. In the following two examples |
| 13676 |
% all \Lcs{oenodeBeamUp} are marked. |
| 13677 |
% \fi |
| 13678 |
% |
| 13679 |
% \iffalse |
| 13680 |
%<*ignore> |
| 13681 |
% \fi |
| 13682 |
\begin{LTXexample} |
| 13683 |
\begin{pspicture}(-2,-2)(2,2) |
| 13684 |
\addtopsstyle{Beam}{fillstyle=solid, fillcolor=green!40} |
| 13685 |
\multido{\i=0+90,\ia=1+2,\ib=2+2}{4}{% |
| 13686 |
\optplate[position=end](0.3;\i)(1;\i) |
| 13687 |
\optplate[position=end, plateheight=1.5](1;\i)(2;\i) |
| 13688 |
\drawwidebeam[beamwidth=0.2](0.3;\i){\ia} |
| 13689 |
\pnode(\oenodeBeamUp{}){Up} |
| 13690 |
\drawwidebeam[loadbeampoints, beamdiv=45]{\ia-\ib} |
| 13691 |
\psdot(Up)\psdot(\oenodeBeamUp{}) |
| 13692 |
} |
| 13693 |
\end{pspicture} |
| 13694 |
\end{LTXexample} |
| 13695 |
|
| 13696 |
\begin{LTXexample} |
| 13697 |
\begin{pspicture}(-2,-2)(2,2) |
| 13698 |
\addtopsstyle{Beam}{fillstyle=solid, fillcolor=green!40} |
| 13699 |
\multido{\i=0+90,\ia=1+2,\ib=2+2}{4}{% |
| 13700 |
\optplate[position=end](0.3;\i)(1;\i) |
| 13701 |
\optplate[position=end](1;\i)(2;\i) |
| 13702 |
\drawwidebeam[beamwidth=0.2](0.3;\i){\ia} |
| 13703 |
\pnode(\oenodeBeamUp{}){Up} |
| 13704 |
\drawwidebeam[loadbeampoints, beamdiv=-45]{\ia-\ib} |
| 13705 |
\psdot(Up)\psdot(\oenodeBeamUp{}) |
| 13706 |
} |
| 13707 |
\end{pspicture} |
| 13708 |
\end{LTXexample} |
| 13709 |
% \iffalse |
| 13710 |
%</ignore> |
| 13711 |
% \fi |
| 13712 |
% |
| 13713 |
% \subsection{Version 3.0}\label{sec:bwd-comp-3.0} |
| 13714 |
% |
| 13715 |
% \ifENGLISH The changes in version 3.0 compared to version 2.1 which are not |
| 13716 |
% backward compatible. |
| 13717 |
% \fi |
| 13718 |
% \ifGERMAN Die Änderungen in Version 3.0 gegenüber Version 2.1, die nicht |
| 13719 |
% abwärtskompatibel sind. |
| 13720 |
% \fi |
| 13721 |
% |
| 13722 |
% \ifENGLISH\subsubsection{General parameters}\fi |
| 13723 |
% \ifGERMAN\subsubsection{Allgemeine Parameter}\fi |
| 13724 |
% |
| 13725 |
% \begin{optionlist} |
| 13726 |
% \optitem*[new]{namingscheme}{old, new} |
| 13727 |
% \ifGERMAN |
| 13728 |
% In Version 2.1 mussten spezielle Komponentenknoten über ihren expliziten |
| 13729 |
% Namen angesprochen werden. Wenn Sie das alte Namensschema benötigen, da Sie |
| 13730 |
% direkt auf die Knoten zugegriffen haben, so müssen Sie |
| 13731 |
% \nxLkeyword{namingscheme=old} verwenden. Seit Version 3.0 werden Makros für |
| 13732 |
% den Zugriff auf die Komponentenknoten bereitgestellt, so dass das |
| 13733 |
% eigentlichen Namensschema unerheblich ist, siehe \prettyref{sec:objnodes} |
| 13734 |
% \fi |
| 13735 |
% \ifENGLISH |
| 13736 |
% In version 2.1 special component nodes had to be accessed by their explicit |
| 13737 |
% name. If you need the old naming scheme, because you accessed internal nodes |
| 13738 |
% directly, then you must set \nxLkeyword{namingscheme=old}. Since version 3.0 |
| 13739 |
% explicit macros are provided to access all special component nodes, so that |
| 13740 |
% the actual naming scheme does not matter, see \prettyref{sec:objnodes}. |
| 13741 |
% \fi |
| 13742 |
% |
| 13743 |
% \poeitem{\smash{\begin{tabular}[t]{@{}r@{}}endbox\\angle\\rotateref\end{tabular}}} |
| 13744 |
% \ifENGLISH These options now affect all components.\fi |
| 13745 |
% \ifGERMAN Diese Parameter wirken sich jetzt auf alle Komponenten aus.\fi |
| 13746 |
% \vspace*{1cm} |
| 13747 |
% |
| 13748 |
% \poeitem{extnode} |
| 13749 |
% \ifENGLISH |
| 13750 |
% Some components now provide more possible positions for |
| 13751 |
% \Lkeyword{extnode}. \Lcomp{optdetector} had only one possible external node, |
| 13752 |
% which was accessible for any value of \Lkeyword{extnode}, now this node can |
| 13753 |
% be accessed only with \Lkeyword{extnode}\opt{=r}. All other values give |
| 13754 |
% different node positions. |
| 13755 |
% \fi |
| 13756 |
% \ifGERMAN |
| 13757 |
% Einigen Komponenten stellen nun mehr mögliche Positionen für |
| 13758 |
% \Lkeyword{extnode} zur Verfügung. So muss war z.B. für \Lcomp{optdetector} nur |
| 13759 |
% ein Knoten möglich, der für jeden Wert von \Lkeyword{extnode} zugänglich |
| 13760 |
% war, jetzt aber nur mit \Lkeyword{extnode}\opt{=r}. Alle anderen Werte |
| 13761 |
% setzen den Knoten an andere Stellen. |
| 13762 |
% \fi |
| 13763 |
% |
| 13764 |
% \poeitem{\textbackslash optbox} |
| 13765 |
% \ifENGLISH An \Lcomp{optbox} does always have the input and output |
| 13766 |
% nodes at the respective interfaces, whereas in version 2.1 the input |
| 13767 |
% and output nodes where at the same position for |
| 13768 |
% \Lkeyword{endbox}\opt{=true}. |
| 13769 |
% \fi |
| 13770 |
% \ifGERMAN Eine \Lcomp{optbox} hat immer einen Eingangs- und |
| 13771 |
% Ausgangsknoten an den entsprechenden Grenzflächen. In Version 2.1 |
| 13772 |
% fielen Eingangs- und Ausgangsknoten zusammen falls \Lkeyword{endbox} |
| 13773 |
% auf \opt{true} gesetzt war. |
| 13774 |
% \fi |
| 13775 |
% |
| 13776 |
% \poeitem{\textbackslash fibercollimator} |
| 13777 |
% \ifENGLISH The \Lcomp{fibercollimator} has only a fiber connection by |
| 13778 |
% default, the beam must be drawn manually or with \Lkeyword{beam} |
| 13779 |
% option. |
| 13780 |
% \fi |
| 13781 |
% \ifGERMAN Der \Lcomp{fibercollimator} hat in den Voreinstellungen nur |
| 13782 |
% eine Faserverbindung, der Strahl muss manuell oder durch Angabe des |
| 13783 |
% \Lkeyword{beam} Parameters gezeichnet werden. |
| 13784 |
% \fi |
| 13785 |
% \end{optionlist} |
| 13786 |
% |
| 13787 |
% \ifENGLISH\subsubsection{Beam connections}\fi |
| 13788 |
% \ifGERMAN\subsubsection{Strahlverbindungen}\fi |
| 13789 |
% \label{sec:bwd-comp-3.0-conn} |
| 13790 |
% |
| 13791 |
% \ifENGLISH |
| 13792 |
% In version 2.1, beam connections could be internal, that is the connections |
| 13793 |
% were specified together with the compent (\Lkeyword{beam} or |
| 13794 |
% \Lkeyword*{conn}), or external with an additional call of \Lcs{drawbeam}. The |
| 13795 |
% main reason for internal connections was the aesthetic aspect of drawing the |
| 13796 |
% beam behind the component, but also convenience played a role. Drawing the |
| 13797 |
% beam behind the component is possible with layering (\prettyref{sec:layers}) |
| 13798 |
% since 3.0. |
| 13799 |
% |
| 13800 |
% Some of the variants of internal beam connections can be used also in 3.0: |
| 13801 |
% \fi |
| 13802 |
% \ifGERMAN |
| 13803 |
% In Version 2.1 konnten Strahlverbindungen intern sein, d.h. die Verbindung |
| 13804 |
% wurde zusammen mit der Komponenten definiert (z.B. mit \Lkeyword{beam}, oder |
| 13805 |
% \Lkeyword*{conn}) oder extern über einen separaten Aufruf von \Lcs{drawbeam}. |
| 13806 |
% Der Hauptgrund für die internen Verbindungen war der ästhetische Aspekt, |
| 13807 |
% zuerst die Verbindung und dann die Komponente darüber zu zeichnen, aber |
| 13808 |
% Bequemlichkeit spielte auch eine Rolle. Seit Version 3.0 kann die Reihenfolge |
| 13809 |
% von Verbindungen und Komponenten über Ebenen geregelt werden |
| 13810 |
% (\prettyref{sec:layers}). |
| 13811 |
% |
| 13812 |
% Manche Varianten für interne Strahlverbindungen können auch in 3.0 verwendet |
| 13813 |
% werden: |
| 13814 |
% \fi |
| 13815 |
% |
| 13816 |
% \iffalse |
| 13817 |
%<*ignore> |
| 13818 |
% \fi |
| 13819 |
\begin{LTXexample}[linerange={1-3,5-5}] |
| 13820 |
\begin{pspicture}(3,2) |
| 13821 |
\pnode(0,1){A}\pnode(3,1){B} |
| 13822 |
\optbox[beam](A)(B) |
| 13823 |
\rput[b]([offset=-0.9]\oenodeCenter{}){\ttfamily conn=o-i, conn=i-o} |
| 13824 |
\end{pspicture} |
| 13825 |
\end{LTXexample} |
| 13826 |
|
| 13827 |
\begin{LTXexample}[linerange={1-3,5-5}] |
| 13828 |
\begin{pspicture}(3,2) |
| 13829 |
\pnode(0,1){A}\pnode(3,1){B} |
| 13830 |
\optbox[beam, beaminside=false](A)(B) |
| 13831 |
\rput[b]([offset=-0.9]\oenodeCenter{}){\ttfamily conn=o-o} |
| 13832 |
\end{pspicture} |
| 13833 |
\end{LTXexample} |
| 13834 |
% \iffalse |
| 13835 |
%</ignore> |
| 13836 |
% \fi |
| 13837 |
% |
| 13838 |
% \ifENGLISH |
| 13839 |
% Other internal connections need an additional \Lcs{drawbeam} call, and if you |
| 13840 |
% want to move the beam behind the component, the code must be wrapped in a |
| 13841 |
% \Lenv{optexp} environment. Except for this, external connection are equivalent: |
| 13842 |
% \fi |
| 13843 |
% \ifGERMAN |
| 13844 |
% Andere Verbindungen können nur über einen zusätzlichen \Lcs{drawbeam} Aufruf |
| 13845 |
% erreicht werden, falls die Verbindung dann hinter der Komponente sein soll, |
| 13846 |
% musst der beteiligte Code in eine \Lenv{optexp}-Umgebung geschachtelt |
| 13847 |
% werden. Außer diesem Aspekt sind die separaten Verbindungen äquivalent: |
| 13848 |
%\fi |
| 13849 |
% |
| 13850 |
% \iffalse |
| 13851 |
%<*ignore> |
| 13852 |
% \fi |
| 13853 |
\begin{LTXexample}[linerange={1-4,6-6}] |
| 13854 |
\begin{pspicture}(3,2) |
| 13855 |
\pnode(0,1){A}\pnode(3,1){B} |
| 13856 |
\optbox(A)(B) |
| 13857 |
\drawbeam(A){} |
| 13858 |
\rput[b]([offset=-0.9]\oenodeCenter{}){\ttfamily conn=o-, conn=a-} |
| 13859 |
\end{pspicture} |
| 13860 |
\end{LTXexample} |
| 13861 |
|
| 13862 |
\begin{LTXexample}[linerange={1-3,5-6}] |
| 13863 |
\begin{pspicture}(3,2) |
| 13864 |
\pnode(0,1){A}\pnode(3,1){B} |
| 13865 |
\optbox(A)(B) |
| 13866 |
\rput[b]([offset=-0.9]\oenodeCenter{}){\ttfamily conn=-o, conn=-b} |
| 13867 |
\drawbeam{}(B) |
| 13868 |
\end{pspicture} |
| 13869 |
\end{LTXexample} |
| 13870 |
|
| 13871 |
\begin{LTXexample}[linerange={1-4,6-8}] |
| 13872 |
\begin{pspicture}(3,2) |
| 13873 |
\pnode(0,1){A}\pnode(3,1){B} |
| 13874 |
\begin{optexp} |
| 13875 |
\optbox(A)(B) |
| 13876 |
\rput[b]([offset=-0.9]\oenodeCenter{}){\ttfamily conn=i-, A-} |
| 13877 |
\drawbeam[beaminsidelast](A){} |
| 13878 |
\end{optexp} |
| 13879 |
\end{pspicture} |
| 13880 |
\end{LTXexample} |
| 13881 |
|
| 13882 |
\begin{LTXexample}[linerange={1-4,6-8}] |
| 13883 |
\begin{pspicture}(3,2) |
| 13884 |
\pnode(0,1){A}\pnode(3,1){B} |
| 13885 |
\begin{optexp} |
| 13886 |
\optbox(A)(B) |
| 13887 |
\rput[b]([offset=-0.9]\oenodeCenter{}){\ttfamily conn=-i, conn=-B} |
| 13888 |
\drawbeam[beaminsidefirst]{}(B) |
| 13889 |
\end{optexp} |
| 13890 |
\end{pspicture} |
| 13891 |
\end{LTXexample} |
| 13892 |
% \iffalse |
| 13893 |
%</ignore> |
| 13894 |
% \fi |
| 13895 |
% |
| 13896 |
% |
| 13897 |
% \makeatletter |
| 13898 |
% \bgroup |
| 13899 |
% \newcommand*{\index@preamble}{} |
| 13900 |
% \let\index@preamble=\relax |
| 13901 |
% \renewcommand{\setindexpreamble}[1]{\def\index@preamble{#1}} |
| 13902 |
% \renewcommand*{\idx@heading}{% |
| 13903 |
% \addchap{\indexname}% |
| 13904 |
% \@mkboth{\indexname}{\indexname}% |
| 13905 |
% } |
| 13906 |
% \renewenvironment{theindex}{% |
| 13907 |
% \idx@heading% |
| 13908 |
% \index@preamble\par\nobreak |
| 13909 |
% \thispagestyle{\indexpagestyle}\parindent\z@ |
| 13910 |
% \setlength{\parskip}{\z@ \@plus .3\p@}% |
| 13911 |
% \setlength{\parfillskip}{\z@ \@plus 1fil}% |
| 13912 |
% \let\item\@idxitem |
| 13913 |
% }{% |
| 13914 |
% \clearpage |
| 13915 |
% } |
| 13916 |
% \renewcommand*\@idxitem{\par\hangindent 40\p@} |
| 13917 |
% \renewcommand*\subitem{\@idxitem \hspace*{20\p@}} |
| 13918 |
% \renewcommand*\subsubitem{\@idxitem \hspace*{30\p@}} |
| 13919 |
% \renewcommand*\indexspace{% |
| 13920 |
% \par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax |
| 13921 |
% } |
| 13922 |
% \renewcommand*\indexname{Index} |
| 13923 |
% \printindex[doc] |
| 13924 |
% \egroup |
| 13925 |
% \makeatother |
| 13926 |
% |
| 13927 |
% \appendix |
| 13928 |
% |
| 13929 |
% \ifGERMAN |
| 13930 |
% \chapter{Versionsgeschichte} |
| 13931 |
% |
| 13932 |
% Diese Versionsgeschichte ist eine Liste von Änderungen, die für den Nutzer des |
| 13933 |
% Pakets von Bedeutung sind. Änderungen, die eher technischer Natur sind und für |
| 13934 |
% den Nutzer des Pakets nicht relevant sind und das Verhalten des Pakets nicht |
| 13935 |
% ändern, werden nicht aufgeführt. Wenn ein Eintrag der Versionsgeschichte ein |
| 13936 |
% Feature als \emph{improved} oder \emph{extended} bekannt gibt, so bedeutet |
| 13937 |
% dies, dass eine Modifikation die Syntax und das Verhalten des Pakets nicht |
| 13938 |
% beeinflusst, oder das es für ältere Versionen kompatibel ist. Einträge, die |
| 13939 |
% als \emph{deprecated}, \emph{modified}, \emph{renamed}, oder \emph{removed} |
| 13940 |
% deklariert sind, verlangen besondere Aufmerksamkeit. Diese bedeuten, dass eine |
| 13941 |
% Modifikation Änderungen in existierenden Dokumenten mit sich ziehen kann. Die |
| 13942 |
% Zahlen an der rechten Seite stehen für die relevante Stelle dieser |
| 13943 |
% Dokumentation, zusätzliche Informationen zur Migration von älteren Dokumenten |
| 13944 |
% sind in \prettyref{sec:bwd-comp} zu finden. |
| 13945 |
% \fi |
| 13946 |
% \ifENGLISH |
| 13947 |
% \chapter{Revision history} |
| 13948 |
% |
| 13949 |
% This revision history is a list of changes relevant to users of this |
| 13950 |
% package. Changes of a more technical nature which do not affect the |
| 13951 |
% user interface or the behavior of the package are not included in the |
| 13952 |
% list. If an entry in the revision history states that a feature has |
| 13953 |
% been \emph{improved} or \emph{extended}, this indicates a modification |
| 13954 |
% which either does not affect the syntax and behavior of the package or |
| 13955 |
% is syntactically backwards compatible (such as the addition of an |
| 13956 |
% optional argument to an existing command). Entries stating that a |
| 13957 |
% feature has been \emph{deprecated}, \emph{modified}, \emph{fixed}, |
| 13958 |
% \emph{renamed}, or \emph{removed} demand attention. They indicate a |
| 13959 |
% modification which may require changes to existing documents. The |
| 13960 |
% numbers on the right indicate the relevant section of this manual, |
| 13961 |
% more information regarding backward compatibility can be found in |
| 13962 |
% \prettyref{sec:bwd-comp}. \fi |
| 13963 |
% |
| 13964 |
% \begin{changelog} |
| 13965 |
% \patchcmd{\release}{\setlength{\itemsep}{0pt}}{\setlength{\itemsep}{0pt}\setlength{\parsep}{0pt}}{}{} |
| 13966 |
% \begin{release}{6.1}{2022-02-06} |
| 13967 |
% \item Fixed bug in \cs{oapmirror} |
| 13968 |
% \end{release} |
| 13969 |
% \begin{release}{6.0}{2021-02-26} |
| 13970 |
% \item Modified \cs{wdmcoupler} to handle an arbitrary number of input nodes\see{comp:wdmcoupler} |
| 13971 |
% \item Modified \cs{wdmsplitter} to handle an arbitrary number of output nodes\see{comp:wdmsplitter} |
| 13972 |
% \item Removed deprecated \opt{lampscale}, use style \opt{CrystalLamp}. |
| 13973 |
% \item Removed deprecated \opt{pollinewidth}, use style \opt{Polarization}. |
| 13974 |
% \item Removed deprecated \cs{optgrid}, use \cs{optgrating}. |
| 13975 |
% \item Removed deprecated \opt{optgridwidth}, use \opt{gratingwidth}. |
| 13976 |
% \item Removed deprecated \opt{optgridheight}, use \opt{gratingheight}. |
| 13977 |
% \item Removed deprecated \opt{optgriddepth}, use \opt{gratingdepth}. |
| 13978 |
% \item Removed deprecated \opt{optgridcount}, use \opt{gratingcount}. |
| 13979 |
% \item Removed deprecated \opt{optgridtype}, use \opt{gratingtype}. |
| 13980 |
% \item Removed deprecated \opt{optgridlinewidth}, use \opt{gratinglinewidth}. |
| 13981 |
% \item Removed deprecated \opt{align}, use \opt{coupleralign}. |
| 13982 |
% \item Removed deprecated \opt{namingschema}. |
| 13983 |
% \end{release} |
| 13984 |
% \begin{release}{5.2}{2014-11-26} |
| 13985 |
% \item Added component \cs{asphericlens}\see{comp:asphericlens} |
| 13986 |
% \item Added component \cs{axicon}\see{comp:axicon} |
| 13987 |
% \item Added component \cs{optwedge}\see{comp:optwedge} |
| 13988 |
% \end{release} |
| 13989 |
% \begin{release}{5.1}{2014-11-19} |
| 13990 |
% \item Added component \cs{oapmirror}\see{comp:oapmirror} |
| 13991 |
% \item Added support for filled beams with path interfaces. |
| 13992 |
% \end{release} |
| 13993 |
% \begin{release}{5.0}{2014-10-30} |
| 13994 |
% \item Added support for arbitrary interface shapes (experimental, |
| 13995 |
% requires the \opt{pst-intersect} package and \opt{pstricks} |
| 13996 |
% version 2.53). |
| 13997 |
% \item Added component \cs{parabolicmirror}\see{comp:parabolicmirror} |
| 13998 |
% \end{release} |
| 13999 |
% \begin{release}{4.10}{2014-06-04} |
| 14000 |
% \item Added value \opt{firstcomp} to parameter \opt{beamalign}\see{prm:beamalign} |
| 14001 |
% \item Modified \cs{optsource} to handle also the beam alignment\see{comp:optsource} |
| 14002 |
% \end{release} |
| 14003 |
% \begin{release}{4.9}{2014-06-03} |
| 14004 |
% \item Added new component \cs{optsource}\see{comp:optsource} |
| 14005 |
% \item Improved naming of the last component name, which can now be |
| 14006 |
% accessed also by its number besides using \opt{N}. |
| 14007 |
% \item Fixed bug related to \opt{extnodes} together with \opt{compname} |
| 14008 |
% \end{release} |
| 14009 |
% \begin{release}{4.8}{2014-02-28} |
| 14010 |
% \item Added component \cs{optaom}\see{comp:optaom} |
| 14011 |
% \item Added option \opt{beammode}\see{prm:beammode} |
| 14012 |
% \item Added option \opt{showinterfaces}\see{prm:showinterfaces} |
| 14013 |
% \end{release} |
| 14014 |
% \begin{release}{4.7}{2014-01-12} |
| 14015 |
% \item Added syntax \opt{<}\prm{num} for accessing relative component |
| 14016 |
% IDs\see{sec:namingobj} |
| 14017 |
% \end{release} |
| 14018 |
% \begin{release}{4.6}{2013-11-27} |
| 14019 |
% \item Added option \opt{extnodes}\see{prm:extnodes} |
| 14020 |
% \item Added option \opt{optdipolecomp}\see{prm:optdipolecomp} |
| 14021 |
% \item Added option \opt{opttripolecomp}\see{prm:opttripolecomp} |
| 14022 |
% \end{release} |
| 14023 |
% \begin{release}{4.5}{2013-07-21} |
| 14024 |
% \item Added option \opt{usewirestyle}\see{prm:usewirestyle} |
| 14025 |
% \item Added line style \opt{fade}, with options \opt{fadeto}, |
| 14026 |
% \opt{fadepoints}, \opt{fadefunc}, and |
| 14027 |
% \opt{fadefuncname}\see{prm:fade}. |
| 14028 |
% \end{release} |
| 14029 |
% \begin{release}{4.4}{2013-07-14} |
| 14030 |
% \item Added component \cs{transmissiongrating}\see{comp:transmissiongrating} |
| 14031 |
% \item Modified \opt{innerlabel} to explicitly set \opt{labelalign=c} |
| 14032 |
% \item Fixed trailing spaces in \opt{savebeampoints} (and \opt{savebeam}). |
| 14033 |
% \item Allow Postscript code in \opt{angle}. |
| 14034 |
% \end{release} |
| 14035 |
% \begin{release}{4.3a}{2013-07-02} |
| 14036 |
% \item Fixed tripole alignment bugs introduced in version 4.3. |
| 14037 |
% \item Again fixed the alignment of reflective \cs{optprism}\see{prm:prismalign} |
| 14038 |
% \item Fixed improper alignment of \cs{optprism} label\see{sec:bwd-comp-4.3a} |
| 14039 |
% \end{release} |
| 14040 |
% \begin{release}{4.3}{2013-06-28} |
| 14041 |
% \item Added option \opt{raprismalign}\see{prm:raprismalign} |
| 14042 |
% \item Fixed alignment of \cs{rightangleprism} and rotation of its |
| 14043 |
% label. |
| 14044 |
% \end{release} |
| 14045 |
% \begin{release}{4.2}{2013-06-07} |
| 14046 |
% \item Added option \opt{startinsidecount}\see{prm:startinsidecount} |
| 14047 |
% \item Added option \opt{stopinsidecount}\see{prm:stopinsidecount} |
| 14048 |
% \item Added option \opt{beampathcount}\see{prm:beampathcount} |
| 14049 |
% \item Added option \opt{beamnodealign}\see{prm:beamnodealign} |
| 14050 |
% \item Added \cs{oeBeamVecMedian}\see{cs:oeBeamVecMedian} |
| 14051 |
% \item Added \cs{oeBeamCenter}\see{cs:oeBeamCenter} |
| 14052 |
% \item Modified the orientation of a reflective |
| 14053 |
% \cs{optprism}\see{sec:bwd-comp-4.2} |
| 14054 |
% \item Fixed bug of \cs{optprism} and \cs{rightangleprism} inside |
| 14055 |
% an \env{optexp} environment. |
| 14056 |
% \item Fixed bug of wrong \cs{rightangleprism} rotation in special |
| 14057 |
% cases. |
| 14058 |
% \item Fixed buggy handling of multiple saved beams\see{prm:savebeam} |
| 14059 |
% \end{release} |
| 14060 |
% \begin{release}{4.1}{2013-05-21} |
| 14061 |
% \item Added option \opt{prismtype}\see{prm:prismtype} |
| 14062 |
% \end{release} |
| 14063 |
% \begin{release}{4.0}{2013-04-15} |
| 14064 |
% \item Added electrical components\see{chap:electrcomp} |
| 14065 |
% \item Added wire connections with \cs{drawwire}\see{sec:drawwire} |
| 14066 |
% \item Added component \cs{optarrowcomp}\see{comp:optarrowcomp} |
| 14067 |
% \item Added component \cs{optbarcomp}\see{comp:optbarcomp} |
| 14068 |
% \item Improved \cs{optdetector}\see{comp:optdetector} |
| 14069 |
% \item Extended \cs{drawfiber} to support component |
| 14070 |
% ranges\see{cs:drawfiber} |
| 14071 |
% \item Extended \opt{couplersep} to support automatic |
| 14072 |
% calculation\see{prm:couplersep} |
| 14073 |
% \item Fixed appearance of \cs{optfiber}\see{sec:bwd-comp-4.0} |
| 14074 |
% \item Fixed \opt{extnodealign} to affect also |
| 14075 |
% multipoles\see{prm:extnodealign} |
| 14076 |
% \item Fixed \opt{pswarning}. |
| 14077 |
% \item Removed old, buggy beam connection code\see{sec:bwd-comp-4.0} |
| 14078 |
% \item Removed option \opt{conn}\see{sec:bwd-comp-4.0} |
| 14079 |
% \item Removed option \opt{connjoin}\see{sec:bwd-comp-4.0} |
| 14080 |
% \item Removed \cs{newOptexpDipoleNolabel}\see{sec:bwd-comp-4.0} |
| 14081 |
% \end{release} |
| 14082 |
% \begin{release}{3.6}{2013-03-20} |
| 14083 |
% \item Added option \opt{compoffset}\see{prm:compoffset} |
| 14084 |
% \item Added option \opt{beampathskip}\see{prm:beampathskip} |
| 14085 |
% \item Added option \opt{innercompalign}\see{prm:innercompalign} |
| 14086 |
% \item Fixed some bugs in the raytracing and beam code. |
| 14087 |
% \end{release} |
| 14088 |
% \begin{release}{3.5}{2013-02-22} |
| 14089 |
% \item Added option \opt{filterangle}\see{prm:filterangle} |
| 14090 |
% \item Fixed wrong output fiber style in \cs{optcoupler} |
| 14091 |
% \item Fixed strange Postscript error which occured with some |
| 14092 |
% interpreters. |
| 14093 |
% \end{release} |
| 14094 |
% \begin{release}{3.4}{2013-02-03} |
| 14095 |
% \item Fixed bugs when using \opt{fillstyle} for some components. |
| 14096 |
% \item Extended option \opt{switchsize}\see{comp:optswitch} |
| 14097 |
% \item Modified coupler center node to be on the base |
| 14098 |
% line\see{sec:centernode} |
| 14099 |
% \item Extended error checking for \cs{drawbeam} and |
| 14100 |
% \cs{drawfiber}\see{sec:accessobj} |
| 14101 |
% \item Fixed some bugs in the connection code. |
| 14102 |
% \end{release} |
| 14103 |
% \begin{release}{3.3a}{2012-09-18} |
| 14104 |
% \item Fixed bug which was exposed by an update of pst-node. |
| 14105 |
% \item Fixed trailing spaces. |
| 14106 |
% \end{release} |
| 14107 |
% \begin{release}{3.3}{2012-08-17} |
| 14108 |
% \item Extended \cs{opttripole} and \cs{optdipole}\see{comp:optdipole} |
| 14109 |
% \item Modified reference angle for label of |
| 14110 |
% \cs{opttripole}\see{sec:bwd-comp-3.3} |
| 14111 |
% \item Added option \opt{optdipolesize} to support two interfaces for |
| 14112 |
% \cs{optdipole}\see{prm:optdipolesize} |
| 14113 |
% \item Added option \opt{gratingalign}\see{prm:gratingalign} |
| 14114 |
% \item Added option \opt{forcebeaminside}\see{prm:forcebeaminside} |
| 14115 |
% \item Extended option \opt{mirrorradius}\see{prm:mirrorradius} |
| 14116 |
% \item Improved \cs{drawbeam} and \cs{drawwidebeam} to be able to use |
| 14117 |
% \opt{ArrowInside} without linestyle\see{prm:ArrowInsideMaxLength} |
| 14118 |
% \item Fixed orientation of \cs{oenodeBeamUp} and |
| 14119 |
% \cs{oenodeBeamLow}\see{cs:oenodeBeamUp} |
| 14120 |
% \item Fixed a bug related to \opt{beaminside} and ambiguous |
| 14121 |
% components. |
| 14122 |
% \item Fixed some trailing spaces. |
| 14123 |
% \item Added more examples\see{sec:examples} |
| 14124 |
% \end{release} |
| 14125 |
% \begin{release}{3.2}{2012-07-26} |
| 14126 |
% \item Added component \cs{glanthompson}\see{comp:glanthompson} |
| 14127 |
% \item Added access to beam vectors with \cs{oeBeamVec}, |
| 14128 |
% \cs{oeBeamVecUp} and \cs{oeBeamVecLow}\see{cs:oeBeamVec} |
| 14129 |
% \item Fixed wrong computation of node distance in \cs{fiberbox} |
| 14130 |
% \item Fixed bug in \cs{wdmsplitter} for \opt{coupleralign=b} and |
| 14131 |
% \opt{couplertype=none} |
| 14132 |
% \item Fixed bug when filling components placed with |
| 14133 |
% \opt{position=end}/\opt{start} |
| 14134 |
% \item Added value \opt{absolute} to parameter |
| 14135 |
% \opt{labelref}\see{prm:labelref} |
| 14136 |
% \item Added examples\see{sec:examples} |
| 14137 |
% \end{release} |
| 14138 |
% \begin{release}{3.1}{2012-07-17} |
| 14139 |
% \item Added component \cs{fiberbox}\see{comp:fiberbox} |
| 14140 |
% \item Extended connection macros to not required curly braces around |
| 14141 |
% node parenthesis any more\see{sec:namingobj} |
| 14142 |
% \item Modified \cs{fibercollimator} to have |
| 14143 |
% \opt{allowbeaminside=false} by default\see{comp:fibercollimator} |
| 14144 |
% \item Extended fiber couplers to allow using only two |
| 14145 |
% nodes\see{sec:coupler} |
| 14146 |
% \item Fixed a bug concerning node expressions with \cs{drawfiber} |
| 14147 |
% \end{release} |
| 14148 |
% \begin{release}{3.0}{2012-07-09} |
| 14149 |
% \item Modified beam connections with \cs{drawbeam} to support |
| 14150 |
% raytracing\see{cs:drawbeam} |
| 14151 |
% \item Added wide beams with \cs{drawwidebeam}\see{cs:drawwidebeam} |
| 14152 |
% \item Added \cs{drawfiber} for fiber connections\see{cs:drawfiber} |
| 14153 |
% \item Added \opt{optexp} environment for layering of components and |
| 14154 |
% connections\see{sec:layers} |
| 14155 |
% \item Added german documentation. |
| 14156 |
% \item Modified naming of component nodes\see{sec:objnodes} |
| 14157 |
% \item Modified \opt{extnode} to work with more |
| 14158 |
% components\see{prm:extnode} |
| 14159 |
% \item Modified \opt{angle} and \opt{rotateref} to affect all |
| 14160 |
% components\see{sec:rotshift} |
| 14161 |
% \item Modified \opt{endbox} to affect all |
| 14162 |
% components\see{sec:positioning} |
| 14163 |
% \item Extended \opt{position} by values \opt{start} and |
| 14164 |
% \opt{end}\see{sec:positioning} |
| 14165 |
% \item Extended \opt{abspos} by values \opt{start} and |
| 14166 |
% \opt{end}\see{sec:positioning} |
| 14167 |
% \item Removed deprecated lens code which used \opt{lenswidth} and |
| 14168 |
% \opt{lensheight} for construction\see{comp:lens} |
| 14169 |
% \item Added option \opt{platesize}\see{prm:platesize} |
| 14170 |
% \item Added option \opt{phwidth}\see{comp:pinhole} |
| 14171 |
% \item Modified option \opt{caxislength}\see{comp:crystal} |
| 14172 |
% \item Deprecated option \opt{lampscale}\see{comp:crystal} |
| 14173 |
% \item Added style \opt{CrystalCaxis}\see{comp:crystal} |
| 14174 |
% \item Added style \opt{CrystalLamp}\see{comp:crystal} |
| 14175 |
% \item Added option \opt{optboxsize}\see{comp:optbox} |
| 14176 |
% \item Extended option \opt{detsize}\see{comp:optdetector} |
| 14177 |
% \item Added style \opt{DetectorStyle}\see{comp:optdetector} |
| 14178 |
% \item Removed deprecated \cs{detector}, use |
| 14179 |
% \cs{optdetector}\see{comp:optdetector} |
| 14180 |
% \item Extended option \opt{doveprismsize}\see{comp:doveprism} |
| 14181 |
% \item Added style \opt{Polarization}\see{comp:polarization} |
| 14182 |
% \item Deprecated option \opt{pollinewidth}\see{comp:polarization} |
| 14183 |
% \item Removed option \opt{polwidth}\see{comp:polarization} |
| 14184 |
% \item Removed option \opt{pol}\see{comp:polarization} |
| 14185 |
% \item Added style \opt{VariableStyle}\see{comp:mirror} |
| 14186 |
% \item Added mirror type \opt{semitrans}\see{prm:mirrortype} |
| 14187 |
% \item Renamed \cs{optgrid} to \cs{optgrating}\see{comp:optgrating} |
| 14188 |
% \item Renamed \opt{optgridwidth} to |
| 14189 |
% \opt{gratingwidth}\see{comp:optgrating} |
| 14190 |
% \item Renamed \opt{optgridheight} to |
| 14191 |
% \opt{gratingheight}\see{comp:optgrating} |
| 14192 |
% \item Renamed \opt{optgriddepth} to |
| 14193 |
% \opt{gratingdepth}\see{comp:optgrating} |
| 14194 |
% \item Renamed \opt{optgridcount} to |
| 14195 |
% \opt{gratingcount}\see{comp:optgrating} |
| 14196 |
% \item Renamed \opt{optgridtype} to |
| 14197 |
% \opt{gratingtype}\see{comp:optgrating} |
| 14198 |
% \item Renamed \opt{optgridlinewidth} to |
| 14199 |
% \opt{gratinglinewidth}\see{comp:optgrating} |
| 14200 |
% \item Added option \opt{prismalign}\see{comp:optprism} |
| 14201 |
% \item Modified faulty alignment of |
| 14202 |
% \cs{rightangleprism}\see{comp:rightangleprism} |
| 14203 |
% \item Extended option \opt{optampsize}\see{comp:optamp} |
| 14204 |
% \item Extended option \opt{optmzmsize}\see{comp:optmzm} |
| 14205 |
% \item Added option \opt{polcontroltype}\see{comp:polcontrol} |
| 14206 |
% \item Extended option \opt{isolatorsize}\see{comp:optisolator} |
| 14207 |
% \item Added style \opt{IsolatorArrow}\see{comp:optisolator} |
| 14208 |
% \item Extended option \opt{fdlsize}\see{comp:fiberdelayline} |
| 14209 |
% \item Added style \opt{FdlArrow}\see{comp:fiberdelayline} |
| 14210 |
% \item Extended option \opt{fiberpolsize}\see{comp:optfiberpolarizer} |
| 14211 |
% \item Added component \cs{optcirculator}\see{comp:optcirculator} |
| 14212 |
% \item Extended option \opt{couplersize}\see{comp:optcoupler} |
| 14213 |
% \item Extended option \opt{couplertype}\see{comp:optcoupler} |
| 14214 |
% \item Renamed option \opt{align} to |
| 14215 |
% \opt{coupleralign}\see{comp:optcoupler} |
| 14216 |
% \item Added style \opt{VariableCoupler}\see{comp:optcoupler} |
| 14217 |
% \item Added style \opt{FilterStyle}\see{comp:optfilter} |
| 14218 |
% \item Extended option \opt{fibercolsize}\see{comp:fibercollimator} |
| 14219 |
% \item Removed deprecated option \opt{labelrelative}\see{sec:labels} |
| 14220 |
% \item Removed deprecated option \opt{iwidth}\see{comp:pinhole} |
| 14221 |
% \item Removed deprecated option \opt{owidth}\see{comp:pinhole} |
| 14222 |
% \item Removed deprecated option \opt{bswidth}\see{comp:beamsplitter} |
| 14223 |
% \item Deprecated \cs{newOptexpDipoleNolabel}, use |
| 14224 |
% \cs{newOptexpDipole}\see{sec:newobj} |
| 14225 |
% \item Deprecated option |
| 14226 |
% \opt{refractiveindex}\see{prm:refractiveindex} |
| 14227 |
% \item Deprecated option \opt{conn}\see{sec:drawbeam} |
| 14228 |
% \item Extended option \opt{fiber}\see{prm:fiber} |
| 14229 |
% \end{release} |
| 14230 |
% \begin{release}{2.1}{2009-11-05} |
| 14231 |
% \item Added component |
| 14232 |
% \cs{optfiberpolarizer}\see{comp:optfiberpolarizer} |
| 14233 |
% \item Added option \opt{compshift}\see{prm:compshift} |
| 14234 |
% \item Added option \opt{label}\see{prm:label} |
| 14235 |
% \item Added option \opt{connjoin} |
| 14236 |
% \item Added options \opt{addtoBeam} and |
| 14237 |
% \opt{newBeam}\see{sec:drawbeam} |
| 14238 |
% \item Added style \opt{OptComp} and related options |
| 14239 |
% \opt{addtoOptComp} and \opt{newOptComp}\see{sec:appearance} |
| 14240 |
% \item Added option \opt{bsstyle}\see{comp:beamsplitter} |
| 14241 |
% \item Extended \cs{fibercollimator} to use up to four reference |
| 14242 |
% nodes\see{comp:fibercollimator} |
| 14243 |
% \item Improved \opt{thicklens} to work also with plain |
| 14244 |
% lenses\see{prm:thicklens} |
| 14245 |
% \item Use pst-doc class for the documentation. |
| 14246 |
% \end{release} |
| 14247 |
% |
| 14248 |
% \begin{release}{2.0}{2008-07-27} |
| 14249 |
% \item Added fiber-optical components\see{chap:fibercomp} |
| 14250 |
% \item Added component \cs{optdiode}\see{comp:optdiode} |
| 14251 |
% \item Added component \cs{pentaprism}\see{comp:pentaprism} |
| 14252 |
% \item Added component |
| 14253 |
% \cs{rightangleprism}\see{comp:rightangleprism} |
| 14254 |
% \item Added component \cs{doveprism}\see{comp:doveprism} |
| 14255 |
% \item Added component \cs{optprism}\see{comp:optprism} |
| 14256 |
% \item Added \cs{drawbeam}\see{sec:drawbeam} |
| 14257 |
% \item Added component connections (options \opt{fiber}, \opt{conn} |
| 14258 |
% and \opt{beam})\see{chap:connecting} |
| 14259 |
% \item Added option \opt{compname}\see{prm:compname} |
| 14260 |
% \item Added option \opt{extnode}\see{prm:extnode} |
| 14261 |
% \item Renamed \cs{detector} to |
| 14262 |
% \cs{optdetector}\see{comp:optdetector} |
| 14263 |
% \end{release} |
| 14264 |
% \begin{release}{1.2}{2008-06-17} |
| 14265 |
% \item Modified lens design to use interface curvatures\see{comp:lens} |
| 14266 |
% \item Added options \opt{lensradiusleft} and |
| 14267 |
% \opt{lensradiusright}\see{comp:lens} |
| 14268 |
% \item Added option \opt{thicklens}\see{comp:lens} |
| 14269 |
% \item Added option \opt{lenstype}\see{comp:lens} |
| 14270 |
% \item Added option \opt{mirrorradius} (curved |
| 14271 |
% mirrors)\see{comp:mirror} |
| 14272 |
% \item Added option \opt{optgridtype} (binary |
| 14273 |
% gratings)\see{comp:optgrating} |
| 14274 |
% \item Added \cs{newOptexpDipole}\see{sec:newobj} |
| 14275 |
% \item Added \cs{newOptexpDipoleNolabel}\see{sec:newobj} |
| 14276 |
% \item Added \cs{newOptexpTripole}\see{sec:newobj} |
| 14277 |
% \item Added \cs{newOptexpFiberDipole}\see{sec:newobj} |
| 14278 |
% \item General improvements of \TeX{} and Postscript code |
| 14279 |
% \end{release} |
| 14280 |
% \begin{release}{1.1}{2007-09-06} |
| 14281 |
% \item Improved labeling features\see{sec:labels} |
| 14282 |
% \item Added parameter \opt{labelref}\see{sec:labels} |
| 14283 |
% \item Replaced \opt{labelrelative} by |
| 14284 |
% \opt{labelref=relative}\see{sec:labels} |
| 14285 |
% \item Renamed \cs{polarisation} to |
| 14286 |
% \cs{polarization}\see{comp:polarization} |
| 14287 |
% \item Renamed \opt{polwidth} to \opt{polsize}\see{comp:polarization} |
| 14288 |
% \item Renamed \opt{pol} to \opt{poltype}\see{comp:polarization} |
| 14289 |
% \item Renamed \opt{bswidth} to \opt{bssize}\see{comp:beamsplitter} |
| 14290 |
% \item Renamed \opt{iwidth} to \opt{innerheight}\see{comp:pinhole} |
| 14291 |
% \item Renamed \opt{owidth} to \opt{outerheight}\see{comp:pinhole} |
| 14292 |
% \item Added support for fillstyle for all components |
| 14293 |
% \end{release} |
| 14294 |
% |
| 14295 |
% \begin{release}{1.0}{2007-07-18} |
| 14296 |
% \item First CTAN version |
| 14297 |
% \end{release} |
| 14298 |
% \end{changelog} |
| 14299 |
% |
| 14300 |
% \StopEventually{} |
| 14301 |
% |
| 14302 |
% \begin{otherlanguage}{english} |
| 14303 |
% \printindex[idx] |
| 14304 |
% \end{otherlanguage} |
| 14305 |
% |
| 14306 |
% \chapter{The \LaTeX/\TeX\ implementation} |
| 14307 |
%<*stylefile> |
| 14308 |
% \section{Requirements} |
| 14309 |
% \begin{macrocode} |
| 14310 |
\RequirePackage{ifthen} |
| 14311 |
\RequirePackage{pstricks} |
| 14312 |
\RequirePackage{pst-xkey} |
| 14313 |
\RequirePackage{pst-node} |
| 14314 |
\RequirePackage{pst-plot} |
| 14315 |
\RequirePackage{multido} |
| 14316 |
\RequirePackage{pst-eucl} |
| 14317 |
\RequirePackage{pst-intersect} |
| 14318 |
\RequirePackage{pstricks-add} |
| 14319 |
\RequirePackage{environ} |
| 14320 |
% \end{macrocode} |
| 14321 |
% Add the Postscript header file. |
| 14322 |
% \begin{macrocode} |
| 14323 |
\@addtofilelist{pst-optexp.pro}{}% |
| 14324 |
\pst@addfams{optexp} |
| 14325 |
\pstheader{pst-optexp.pro} |
| 14326 |
% \end{macrocode} |
| 14327 |
% This holds a comma-separated list of all component names which are |
| 14328 |
% defined in a \nxLenv{pspicture} environment. The list is cleared when |
| 14329 |
% leaving the \nxLenv{pspicture} environment. |
| 14330 |
% \begin{macrocode} |
| 14331 |
\gdef\POE@complist{}% |
| 14332 |
% \end{macrocode} |
| 14333 |
% This hold a comma-separated list of the numbers of all saved beam end |
| 14334 |
% points in a \nxLenv{pspicture} environment. The list is used to delete |
| 14335 |
% all remaining Postscript information about the saved beams when |
| 14336 |
% leaving the current \nxLenv{pspicture}, as they may cause problems |
| 14337 |
% inside any following optexp-drawing. |
| 14338 |
% \begin{macrocode} |
| 14339 |
\gdef\POE@beamlist{1}% |
| 14340 |
\g@addto@macro{\endpspicture}{% |
| 14341 |
% \end{macrocode} |
| 14342 |
% Undefine all beam nodes at the end of the \nxLenv{pspicture}. |
| 14343 |
% \begin{macrocode} |
| 14344 |
\expandafter\XKV@for@n\expandafter{\POE@beamlist}\POE@temp{% |
| 14345 |
\POE@Verb{% |
| 14346 |
/lastBeamPointUp\POE@temp\space |
| 14347 |
/lastBeamPointLow\POE@temp\space |
| 14348 |
/lastBeamPoint\POE@temp\space |
| 14349 |
3 { currentdict exch undef } repeat |
| 14350 |
/N@\oenodeBeam{\POE@temp} |
| 14351 |
/N@\oenodeBeamUp{\POE@temp} |
| 14352 |
/N@\oenodeBeamLow{\POE@temp} |
| 14353 |
3 { tx@NodeDict exch undef } repeat |
| 14354 |
}% |
| 14355 |
}% |
| 14356 |
% \end{macrocode} |
| 14357 |
% Reset the component list. |
| 14358 |
% \begin{macrocode} |
| 14359 |
\gdef\POE@complist{}\gdef\POE@beamlist{1}\global\POE@cnt=0\relax |
| 14360 |
}% |
| 14361 |
% \end{macrocode} |
| 14362 |
% Some convenience definitions. |
| 14363 |
% \begin{macrocode} |
| 14364 |
\def\pst@optexpdict{tx@OptexpDict begin } |
| 14365 |
\def\POE@dict#1{\pst@optexpdict #1 end} |
| 14366 |
\def\POE@Verb#1{\pst@Verb{\pst@optexpdict #1 end }}% |
| 14367 |
% \end{macrocode} |
| 14368 |
% Save the pstricks-add line definition for use with the beams |
| 14369 |
% \begin{macrocode} |
| 14370 |
\let\POE@tx@Line\tx@Line |
| 14371 |
\SpecialCoor |
| 14372 |
% \end{macrocode} |
| 14373 |
% |
| 14374 |
% \section{Basic definitions} |
| 14375 |
% \subsection{Switches for the boolean keys} |
| 14376 |
% See respective key definitions for explanation. |
| 14377 |
% \begin{macrocode} |
| 14378 |
\newif\ifPOE@backlayer |
| 14379 |
\newif\ifPOE@frontlayer |
| 14380 |
\newif\ifPOE@optexpenv |
| 14381 |
\newif\ifPOE@variable |
| 14382 |
\newif\ifPOE@voltage |
| 14383 |
\newif\ifPOE@caxisinv |
| 14384 |
\newif\ifPOE@reverse |
| 14385 |
\newif\ifPOE@lamp |
| 14386 |
\newif\ifPOE@component@optional |
| 14387 |
\newif\ifPOE@debug@showoptdots |
| 14388 |
\newif\ifPOE@debug@showifcnodes |
| 14389 |
\newif\ifPOE@debug@showinterfaces |
| 14390 |
\newif\ifPOE@endbox |
| 14391 |
\newif\ifPOE@startbox |
| 14392 |
\newif\ifPOE@thicklens |
| 14393 |
\newif\ifPOE@usefiberstyle |
| 14394 |
\newif\ifPOE@usewirestyle |
| 14395 |
\newif\ifPOE@fiberin@ |
| 14396 |
\newif\ifPOE@fiberin@top |
| 14397 |
\newif\ifPOE@fiberin@bottom |
| 14398 |
\newif\ifPOE@fiberout@ |
| 14399 |
\newif\ifPOE@fiberout@top |
| 14400 |
\newif\ifPOE@fiberout@bottom |
| 14401 |
\newif\ifPOE@fiberpresetin@ |
| 14402 |
\newif\ifPOE@fiberpresetin@top |
| 14403 |
\newif\ifPOE@fiberpresetin@bottom |
| 14404 |
\newif\ifPOE@fiberpresetout@ |
| 14405 |
\newif\ifPOE@fiberpresetout@top |
| 14406 |
\newif\ifPOE@fiberpresetout@bottom |
| 14407 |
\newif\ifPOE@wirein@ |
| 14408 |
\newif\ifPOE@wirein@top |
| 14409 |
\newif\ifPOE@wirein@bottom |
| 14410 |
\newif\ifPOE@wireout@ |
| 14411 |
\newif\ifPOE@wireout@top |
| 14412 |
\newif\ifPOE@wireout@bottom |
| 14413 |
\newif\ifPOE@wirepresetin@ |
| 14414 |
\newif\ifPOE@wirepresetin@top |
| 14415 |
\newif\ifPOE@wirepresetin@bottom |
| 14416 |
\newif\ifPOE@wirepresetout@ |
| 14417 |
\newif\ifPOE@wirepresetout@top |
| 14418 |
\newif\ifPOE@wirepresetout@bottom |
| 14419 |
\newif\ifPOE@beam |
| 14420 |
\newif\ifPOE@startinside |
| 14421 |
\newif\ifPOE@stopinside |
| 14422 |
\newif\ifPOE@beaminsidefirst |
| 14423 |
\newif\ifPOE@beaminsidelast |
| 14424 |
\newif\ifPOE@savebeam |
| 14425 |
\newif\ifPOE@loadbeam |
| 14426 |
\newif\ifPOE@beaminside |
| 14427 |
\newif\ifPOE@raytrace |
| 14428 |
\newif\ifPOE@pswarning |
| 14429 |
\newif\ifPOE@useNA |
| 14430 |
% \end{macrocode} |
| 14431 |
% This is to check if \nxLkeyword{compname} is set inside or outside of a component. For this no boolean key is provided. |
| 14432 |
% \begin{macrocode} |
| 14433 |
\newif\ifPOE@insideobj\POE@insideobjfalse |
| 14434 |
% \end{macrocode} |
| 14435 |
% |
| 14436 |
% \subsection{Counters} |
| 14437 |
% Count the components in one \nxLenv{pspicture} environment. |
| 14438 |
% \begin{macrocode} |
| 14439 |
\newcount\POE@cnt |
| 14440 |
% \end{macrocode} |
| 14441 |
% Save the current count at the end of the optexp-environment, before |
| 14442 |
% the second pass. |
| 14443 |
% \begin{macrocode} |
| 14444 |
\newcount\POE@oldcnt |
| 14445 |
% \end{macrocode} |
| 14446 |
% Count the temporal planes which are created for connections to nodes. |
| 14447 |
% \begin{macrocode} |
| 14448 |
\newcount\POE@nodecnt |
| 14449 |
% \end{macrocode} |
| 14450 |
% Count the number of input nodes of a wdmcoupler, or output nodes of a wdmsplitter |
| 14451 |
% \begin{macrocode} |
| 14452 |
\newcount\POE@couplernodecount |
| 14453 |
% \end{macrocode} |
| 14454 |
% |
| 14455 |
% \subsection{Fixed strings} |
| 14456 |
% These are all the fixed strings which are used as possible values for |
| 14457 |
% choicekeys. |
| 14458 |
% \begin{macrocode} |
| 14459 |
\def\POE@str@absolute{absolute} |
| 14460 |
\def\POE@str@auto{auto} |
| 14461 |
\def\POE@str@bandpass{bandpass} |
| 14462 |
\def\POE@str@bandstop{bandstop} |
| 14463 |
\def\POE@str@binary{binary} |
| 14464 |
\def\POE@str@blazed{blazed} |
| 14465 |
\def\POE@str@bottom{bottom} |
| 14466 |
\def\POE@str@center{center} |
| 14467 |
\def\POE@str@circle{circle} |
| 14468 |
\def\POE@str@closed{closed} |
| 14469 |
\def\POE@str@connection{connection} |
| 14470 |
\def\POE@str@coupling{coupling} |
| 14471 |
\def\POE@str@cross{cross} |
| 14472 |
\def\POE@str@cube{cube} |
| 14473 |
\def\POE@str@custom{custom} |
| 14474 |
\def\POE@str@default{default} |
| 14475 |
\def\POE@str@diode{diode} |
| 14476 |
\def\POE@str@directional{directional} |
| 14477 |
\def\POE@str@ellipse{ellipse} |
| 14478 |
\def\POE@str@elliptic{elliptic} |
| 14479 |
\def\POE@str@extended{extended} |
| 14480 |
\def\POE@str@global{global} |
| 14481 |
\def\POE@str@highpass{highpass} |
| 14482 |
\def\POE@str@lcirc{lcirc} |
| 14483 |
\def\POE@str@left{left} |
| 14484 |
\def\POE@str@linear{linear} |
| 14485 |
\def\POE@str@lowpass{lowpass} |
| 14486 |
\def\POE@str@misc{misc} |
| 14487 |
\def\POE@str@none{none} |
| 14488 |
\def\POE@str@opened{opened} |
| 14489 |
\def\POE@str@parallel{parallel} |
| 14490 |
\def\POE@str@perp{perp} |
| 14491 |
\def\POE@str@piezo{piezo} |
| 14492 |
\def\POE@str@plain{plain} |
| 14493 |
\def\POE@str@plate{plate} |
| 14494 |
\def\POE@str@pulse{pulse} |
| 14495 |
\def\POE@str@quiet{quiet} |
| 14496 |
\def\POE@str@rcirc{rcirc} |
| 14497 |
\def\POE@str@rectangle{rectangle} |
| 14498 |
\def\POE@str@reflective{reflective} |
| 14499 |
\def\POE@str@relative{relative} |
| 14500 |
\def\POE@str@relgrav{relgrav} |
| 14501 |
\def\POE@str@right{right} |
| 14502 |
\def\POE@str@round{round} |
| 14503 |
\def\POE@str@sawtooth{sawtooth} |
| 14504 |
\def\POE@str@semitrans{semitrans} |
| 14505 |
\def\POE@str@sine{sine} |
| 14506 |
\def\POE@str@standard{standard} |
| 14507 |
\def\POE@str@symmetric{symmetric} |
| 14508 |
\def\POE@str@top{top} |
| 14509 |
\def\POE@str@transmittive{transmittive} |
| 14510 |
\def\POE@str@transparency{transparency} |
| 14511 |
\def\POE@str@triangle{triangle} |
| 14512 |
\def\POE@str@vector{vector} |
| 14513 |
\def\POE@str@verbose{verbose} |
| 14514 |
% \end{macrocode} |
| 14515 |
% |
| 14516 |
% \section{Parameter and style definitions} |
| 14517 |
% The parameters and styles are commented quiet well in the user documentation, |
| 14518 |
% here you will find only additional comments about technical peculiarities. |
| 14519 |
% \begin{macrocode} |
| 14520 |
\newpsstyle{OptComp}{}% |
| 14521 |
\define@key[psset]{optexp}{newOptComp}{% |
| 14522 |
\newpsstyle{OptComp}{#1}% |
| 14523 |
} |
| 14524 |
\define@key[psset]{optexp}{addtoOptComp}{% |
| 14525 |
\addtopsstyle{OptComp}{#1}% |
| 14526 |
} |
| 14527 |
\newpsstyle{OptionalStyle}{linestyle=dashed,dash=1.5pt 1pt}% |
| 14528 |
\newpsstyle{IfcNodeStyle}{dotstyle=x, dotscale=1.5, linecolor=blue}% |
| 14529 |
\newpsstyle{IfcStyle}{linestyle=dashed, dash=1pt 1pt, linecolor=red!70!black}% |
| 14530 |
\newpsstyle{Beam}{linecolor=green!90!black, linejoin=1}% |
| 14531 |
\define@key[psset]{optexp}{newBeam}{% |
| 14532 |
\newpsstyle{Beam}{#1}% |
| 14533 |
} |
| 14534 |
\define@key[psset]{optexp}{addtoBeam}{% |
| 14535 |
\addtopsstyle{Beam}{#1}% |
| 14536 |
} |
| 14537 |
% \end{macrocode} |
| 14538 |
% Styles for the automatic fiber connections. |
| 14539 |
% \begin{macrocode} |
| 14540 |
\newpsstyle{Fiber}{}% |
| 14541 |
\define@key[psset]{optexp}{newFiber}{% |
| 14542 |
\newpsstyle{Fiber}{#1}% |
| 14543 |
} |
| 14544 |
\define@key[psset]{optexp}{addtoFiber}{% |
| 14545 |
\addtopsstyle{Fiber}{#1}% |
| 14546 |
} |
| 14547 |
\newpsstyle{FiberIn}{style=Fiber}% |
| 14548 |
\define@key[psset]{optexp}{newFiberIn}{% |
| 14549 |
\newpsstyle{FiberIn}{#1}% |
| 14550 |
} |
| 14551 |
\define@key[psset]{optexp}{addtoFiberIn}{% |
| 14552 |
\addtopsstyle{FiberIn}{#1}% |
| 14553 |
} |
| 14554 |
\newpsstyle{FiberOut}{style=Fiber}% |
| 14555 |
\define@key[psset]{optexp}{newFiberOut}{% |
| 14556 |
\newpsstyle{FiberOut}{#1}% |
| 14557 |
} |
| 14558 |
\define@key[psset]{optexp}{addtoFiberOut}{% |
| 14559 |
\addtopsstyle{FiberOut}{#1}% |
| 14560 |
} |
| 14561 |
\newpsstyle{FiberIn1}{style=FiberIn}% |
| 14562 |
\define@key[psset]{optexp}{newFiberIn1}{% |
| 14563 |
\newpsstyle{FiberIn1}{#1}% |
| 14564 |
} |
| 14565 |
\define@key[psset]{optexp}{addtoFiberIn1}{% |
| 14566 |
\addtopsstyle{FiberIn1}{#1}% |
| 14567 |
} |
| 14568 |
\newpsstyle{FiberIn2}{style=FiberIn}% |
| 14569 |
\define@key[psset]{optexp}{newFiberIn2}{% |
| 14570 |
\newpsstyle{FiberIn2}{#1}% |
| 14571 |
} |
| 14572 |
\define@key[psset]{optexp}{addtoFiberIn2}{% |
| 14573 |
\addtopsstyle{FiberIn2}{#1}% |
| 14574 |
} |
| 14575 |
\newpsstyle{FiberOut1}{style=FiberOut}% |
| 14576 |
\define@key[psset]{optexp}{newFiberOut1}{% |
| 14577 |
\newpsstyle{FiberOut1}{#1}% |
| 14578 |
} |
| 14579 |
\define@key[psset]{optexp}{addtoFiberOut1}{% |
| 14580 |
\addtopsstyle{FiberOut1}{#1}% |
| 14581 |
} |
| 14582 |
\newpsstyle{FiberOut2}{style=FiberOut}% |
| 14583 |
\define@key[psset]{optexp}{newFiberOut2}{% |
| 14584 |
\newpsstyle{FiberOut2}{#1}% |
| 14585 |
} |
| 14586 |
\define@key[psset]{optexp}{addtoFiberOut2}{% |
| 14587 |
\addtopsstyle{FiberOut2}{#1}% |
| 14588 |
} |
| 14589 |
% \end{macrocode} |
| 14590 |
% |
| 14591 |
% Electrical connection stuff |
| 14592 |
% \begin{macrocode} |
| 14593 |
\newpsstyle{Wire}{} |
| 14594 |
\define@key[psset]{optexp}{newWire}{% |
| 14595 |
\newpsstyle{Wire}{#1}% |
| 14596 |
} |
| 14597 |
\define@key[psset]{optexp}{addtoWire}{% |
| 14598 |
\addtopsstyle{Wire}{#1}% |
| 14599 |
} |
| 14600 |
\newpsstyle{WireIn}{style=Wire} |
| 14601 |
\define@key[psset]{optexp}{newWireIn}{% |
| 14602 |
\newpsstyle{WireIn}{#1}% |
| 14603 |
} |
| 14604 |
\define@key[psset]{optexp}{addtoWireIn}{% |
| 14605 |
\addtopsstyle{WireIn}{#1}% |
| 14606 |
} |
| 14607 |
\newpsstyle{WireIn1}{style=WireIn} |
| 14608 |
\define@key[psset]{optexp}{newWireIn1}{% |
| 14609 |
\newpsstyle{WireIn1}{#1}% |
| 14610 |
} |
| 14611 |
\define@key[psset]{optexp}{addtoWireIn1}{% |
| 14612 |
\addtopsstyle{WireIn1}{#1}% |
| 14613 |
} |
| 14614 |
\newpsstyle{WireIn2}{style=WireIn} |
| 14615 |
\define@key[psset]{optexp}{newWireIn2}{% |
| 14616 |
\newpsstyle{WireIn2}{#1}% |
| 14617 |
} |
| 14618 |
\define@key[psset]{optexp}{addtoWireIn2}{% |
| 14619 |
\addtopsstyle{WireIn2}{#1}% |
| 14620 |
} |
| 14621 |
\newpsstyle{WireOut}{style=Wire} |
| 14622 |
\define@key[psset]{optexp}{newWireOut}{% |
| 14623 |
\newpsstyle{WireOut}{#1}% |
| 14624 |
} |
| 14625 |
\define@key[psset]{optexp}{addtoWireOut}{% |
| 14626 |
\addtopsstyle{WireOut}{#1}% |
| 14627 |
} |
| 14628 |
\newpsstyle{WireOut1}{style=WireOut} |
| 14629 |
\define@key[psset]{optexp}{newWireOut1}{% |
| 14630 |
\newpsstyle{WireOut1}{#1}% |
| 14631 |
} |
| 14632 |
\define@key[psset]{optexp}{addtoWireOut1}{% |
| 14633 |
\addtopsstyle{WireOut1}{#1}% |
| 14634 |
} |
| 14635 |
\newpsstyle{WireOut2}{style=WireOut} |
| 14636 |
\define@key[psset]{optexp}{newWireOut2}{% |
| 14637 |
\newpsstyle{WireOut2}{#1}% |
| 14638 |
} |
| 14639 |
\define@key[psset]{optexp}{addtoWireOut2}{% |
| 14640 |
\addtopsstyle{WireOut2}{#1}% |
| 14641 |
} |
| 14642 |
\newpsstyle{ElecComp}{} |
| 14643 |
% \end{macrocode} |
| 14644 |
% Special styles to change only a part of some devices. |
| 14645 |
% \begin{macrocode} |
| 14646 |
\newpsstyle{ExtendedMirror}{% |
| 14647 |
linestyle=none, hatchwidth=0.5\pslinewidth, |
| 14648 |
hatchsep=1.4\pslinewidth, fillstyle=hlines |
| 14649 |
}% |
| 14650 |
\newpsstyle{VariableStyle}{% |
| 14651 |
linewidth=0.8\pslinewidth, arrowinset=0, arrowscale=0.8, arrows=<-> |
| 14652 |
} |
| 14653 |
\newpsstyle{SemitransMirror}{linestyle=none, fillstyle=solid,fillcolor=black!30}% |
| 14654 |
\newpsstyle{PiezoMirror}{fillstyle=solid,fillcolor=black!30}% |
| 14655 |
\newpsstyle{IsolatorArrow}{linewidth=2\pslinewidth, arrowinset=0} |
| 14656 |
\newpsstyle{CrystalCaxis}{% |
| 14657 |
linestyle=dashed, dash=2pt 2pt, linewidth=0.7\pslinewidth, |
| 14658 |
arrowinset=0, arrows=-> |
| 14659 |
} |
| 14660 |
\newpsstyle{CrystalLamp}{linewidth=0.6\pslinewidth} |
| 14661 |
\newpsstyle{FdlArrow}{arrowinset=0, arrows=->} |
| 14662 |
\newpsstyle{VariableCoupler}{arrowinset=0, arrows=->} |
| 14663 |
% \end{macrocode} |
| 14664 |
% |
| 14665 |
% \subsection{General parameters} |
| 14666 |
% \begin{macrocode} |
| 14667 |
\define@boolkey[psset]{optexp}[POE@component@]{optional}[true]{} |
| 14668 |
\define@boolkey[psset]{optexp}[POE@]{usefiberstyle}[true]{} |
| 14669 |
\define@choicekey[psset]{optexp}{usewirestyle}% |
| 14670 |
[\val\nr]{true,false}[true]{% |
| 14671 |
\psset[optexp]{usefiberstyle=false}% |
| 14672 |
\ifcase\nr\relax |
| 14673 |
\POE@usewirestyletrue |
| 14674 |
\or |
| 14675 |
\POE@usewirestylefalse |
| 14676 |
\fi}% |
| 14677 |
\define@boolkey[psset]{optexp}[POE@]{usewirestyle}[true]{} |
| 14678 |
\define@boolkey[psset]{optexp}[POE@debug@]{showoptdots}[true]{} |
| 14679 |
\define@boolkey[psset]{optexp}[POE@debug@]{showifcnodes}[true]{} |
| 14680 |
\define@boolkey[psset]{optexp}[POE@debug@]{showinterfaces}[true]{} |
| 14681 |
% \end{macrocode} |
| 14682 |
% The positioning parameters. |
| 14683 |
% \begin{macrocode} |
| 14684 |
\define@boolkey[psset]{optexp}[POE@]{endbox}[true]{} |
| 14685 |
\define@boolkey[psset]{optexp}[POE@]{startbox}[true]{} |
| 14686 |
\define@choicekey*+[psset]{optexp}{position}[\val\nr]{start,end}{% |
| 14687 |
\ifcase\nr\relax |
| 14688 |
\psset[optexp]{startbox, endbox=false}% |
| 14689 |
\or |
| 14690 |
\psset[optexp]{startbox=false, endbox=true}% |
| 14691 |
\fi |
| 14692 |
}{% |
| 14693 |
\psset[optexp]{startbox=false, endbox=false}% |
| 14694 |
\edef\POE@key@position{#1}% |
| 14695 |
}% |
| 14696 |
\define@choicekey*+[psset]{optexp}{abspos}[\val\nr]{start,end}{% |
| 14697 |
\ifcase\nr\relax |
| 14698 |
\psset[optexp]{startbox, endbox=false}% |
| 14699 |
\or |
| 14700 |
\psset[optexp]{startbox=false, endbox=true}% |
| 14701 |
\fi |
| 14702 |
}{% |
| 14703 |
\psset[optexp]{startbox=false, endbox=false}% |
| 14704 |
\edef\POE@key@abspos{#1}% |
| 14705 |
}% |
| 14706 |
\define@key[psset]{optexp}{compshift}{% |
| 14707 |
\pst@checknum{#1}\POE@key@compshift |
| 14708 |
} |
| 14709 |
\define@key[psset]{optexp}{angle}{% |
| 14710 |
\pst@checknum{#1}\POE@key@angle |
| 14711 |
} |
| 14712 |
\define@key[psset]{optexp}{compoffset}{% |
| 14713 |
\pst@checknum{#1}\POE@key@compoffset |
| 14714 |
} |
| 14715 |
\define@choicekey+[psset]{optexp}{innercompalign}% |
| 14716 |
[\val\nr]{rel,abs,relative,absolute}% |
| 14717 |
{% |
| 14718 |
\ifcase\nr\relax |
| 14719 |
\let\POE@key@innercompalign\POE@str@relative |
| 14720 |
\or |
| 14721 |
\let\POE@key@innercompalign\POE@str@absolute |
| 14722 |
\else |
| 14723 |
\def\POE@key@innercompalign{#1}% |
| 14724 |
\fi |
| 14725 |
}% |
| 14726 |
{\PackageError{pst-optexp}{Unknown value '\val' for innercompalign}}% |
| 14727 |
\psset[optexp]{% |
| 14728 |
position={}, |
| 14729 |
abspos={}, |
| 14730 |
compshift=0, |
| 14731 |
compoffset=0, |
| 14732 |
innercompalign=relative, |
| 14733 |
angle=0 |
| 14734 |
}% |
| 14735 |
% \end{macrocode} |
| 14736 |
% Layering |
| 14737 |
% \begin{macrocode} |
| 14738 |
\define@boolkey[psset]{optexp}[POE@]{backlayer}[true]{} |
| 14739 |
\define@boolkey[psset]{optexp}[POE@]{frontlayer}[true]{} |
| 14740 |
\define@boolkey[psset]{optexp}[POE@]{optexpenv}[true]{} |
| 14741 |
\psset[optexp]{backlayer, frontlayer}% |
| 14742 |
% \end{macrocode} |
| 14743 |
% Labels |
| 14744 |
% \begin{macrocode} |
| 14745 |
\newcommand{\oelabel}[1]{#1}% |
| 14746 |
\define@key[psset]{optexp}{labelangle}{% |
| 14747 |
\pst@checknum{#1}\POE@key@labelangle |
| 14748 |
} |
| 14749 |
\define@key[psset]{optexp}{labeloffset}{% |
| 14750 |
\pst@checknum{#1}\POE@key@labeloffset |
| 14751 |
} |
| 14752 |
\define@key[psset]{optexp}{labelstyle}{% |
| 14753 |
\def\POE@key@labelstyle{#1}% |
| 14754 |
} |
| 14755 |
\define@key[psset]{optexp}{labelalign}{% |
| 14756 |
\def\POE@key@labelalign{#1}% |
| 14757 |
} |
| 14758 |
\define@choicekey+[psset]{optexp}{labelref}% |
| 14759 |
[\val\nr]{absolute,relative,relgrav,global}% |
| 14760 |
{% |
| 14761 |
\ifcase\nr\relax |
| 14762 |
\let\POE@key@labelref\POE@str@global |
| 14763 |
\else |
| 14764 |
\def\POE@key@labelref{#1}% |
| 14765 |
\fi |
| 14766 |
}{% |
| 14767 |
\PackageError{pst-optexp}% |
| 14768 |
{Unknown value '\val' for labelref}% |
| 14769 |
}% |
| 14770 |
\define@choicekey*+[psset]{optexp}{innerlabel}% |
| 14771 |
[\val\nr]{true}[true]% |
| 14772 |
{\ifcase\nr\relax |
| 14773 |
\psset[optexp]{labeloffset=0, labelref=relative, labelalign=c}% |
| 14774 |
\fi} |
| 14775 |
{\PackageError{pst-optexp}{Unknown value '\val' for innerlabel}}% |
| 14776 |
\define@key[psset]{optexp}{label}{% |
| 14777 |
\pst@expandafter\POE@psset@@label{#1} {} {} {} {} {}\@nil |
| 14778 |
}% |
| 14779 |
\def\POE@psset@@label#1 #2 #3 #4 #5\@nil{% |
| 14780 |
\edef\POE@temp{#4}% |
| 14781 |
\ifx\POE@temp\@empty\else |
| 14782 |
\expandafter\ifx\POE@temp.\else |
| 14783 |
\psset[optexp]{labelref=#4}% |
| 14784 |
\fi |
| 14785 |
\fi |
| 14786 |
\edef\POE@temp{#3}% |
| 14787 |
\ifx\POE@temp\@empty\else |
| 14788 |
\expandafter\ifx\POE@temp.\else |
| 14789 |
\psset[optexp]{labelalign=#3}% |
| 14790 |
\fi |
| 14791 |
\fi |
| 14792 |
\edef\POE@temp{#2}% |
| 14793 |
\ifx\POE@temp\@empty\else |
| 14794 |
\expandafter\ifx\POE@temp.\else |
| 14795 |
\psset[optexp]{labelangle=#2}% |
| 14796 |
\fi |
| 14797 |
\fi |
| 14798 |
\edef\POE@temp{#1}% |
| 14799 |
\ifx\POE@temp\@empty\else |
| 14800 |
\expandafter\ifx\POE@temp.\else |
| 14801 |
\psset[optexp]{labeloffset=#1}% |
| 14802 |
\fi |
| 14803 |
\fi |
| 14804 |
}% |
| 14805 |
% \end{macrocode} |
| 14806 |
% This is for internal use only, it sets the reference angle for the \opt{labelangle} parameter and can be different for some components. |
| 14807 |
% \begin{macrocode} |
| 14808 |
\define@key[psset]{optexp}{ref@angle}{% |
| 14809 |
\pst@checknum{#1}\POE@key@labelrefangle |
| 14810 |
}% |
| 14811 |
\psset[optexp]{% |
| 14812 |
labeloffset=0.8, |
| 14813 |
labelangle=0, |
| 14814 |
labelstyle=, |
| 14815 |
labelalign=c, |
| 14816 |
labelref=relgrav, |
| 14817 |
ref@angle=180 |
| 14818 |
}% |
| 14819 |
% \end{macrocode} |
| 14820 |
% External node |
| 14821 |
% \begin{macrocode} |
| 14822 |
\define@choicekey+[psset]{optexp}{extnodealign}% |
| 14823 |
[\val\nr]{rel,abs,relative,absolute}% |
| 14824 |
{% |
| 14825 |
\ifcase\nr\relax |
| 14826 |
\let\POE@key@extnodealign\POE@str@relative |
| 14827 |
\or |
| 14828 |
\let\POE@key@extnodealign\POE@str@absolute |
| 14829 |
\else |
| 14830 |
\def\POE@key@extnodealign{#1}% |
| 14831 |
\fi |
| 14832 |
}% |
| 14833 |
{\PackageError{pst-optexp}{Unknown value '\val' for extnodealign}} |
| 14834 |
% \end{macrocode} |
| 14835 |
% This part was copied and adapted from \cs{psset@@ref} from pstricks.tex |
| 14836 |
% \begin{macrocode} |
| 14837 |
\define@key[psset]{optexp}{extnodes}{% |
| 14838 |
\edef\POE@key@extnode{#1}% |
| 14839 |
\ifx\@empty\POE@key@extnode |
| 14840 |
\edef\POE@key@extnode@cnt{1}% |
| 14841 |
\edef\POE@key@extnode@xrefs{0 }% |
| 14842 |
\edef\POE@key@extnode@yrefs{0 }% |
| 14843 |
\else |
| 14844 |
\def\POE@key@extnode@xrefs{}% |
| 14845 |
\def\POE@key@extnode@yrefs{}% |
| 14846 |
\psForeach{\POE@tempD}{#1,}{% |
| 14847 |
\ifx\POE@tempD\@empty |
| 14848 |
\advance\psLoopIndex by -1 |
| 14849 |
\else |
| 14850 |
\pst@expandafter\POE@psset@@extnode{\POE@tempD}\@empty,,\@nil |
| 14851 |
\edef\POE@key@extnode@xrefs{\POE@key@extnode@xrefs\POE@key@extnode@xref\space}% |
| 14852 |
\edef\POE@key@extnode@yrefs{\POE@key@extnode@yrefs\POE@key@extnode@yref\space}% |
| 14853 |
\fi |
| 14854 |
}% |
| 14855 |
\edef\POE@key@extnode@cnt{\the\psLoopIndex}% |
| 14856 |
\fi |
| 14857 |
}% |
| 14858 |
% \end{macrocode} |
| 14859 |
% Need to have two options 'extnode' and 'extnodes' to allow extnode={-0.5,1} without |
| 14860 |
% \begin{macrocode} |
| 14861 |
\define@key[psset]{optexp}{extnode}{% |
| 14862 |
\edef\POE@key@extnode{#1}% |
| 14863 |
\edef\POE@key@extnode@cnt{1}% |
| 14864 |
\ifx\@empty\POE@key@extnode |
| 14865 |
\edef\POE@key@extnode@xrefs{0 }% |
| 14866 |
\edef\POE@key@extnode@yrefs{0 }% |
| 14867 |
\else |
| 14868 |
\pst@expandafter\POE@psset@@extnode{#1}\@empty,,\@nil |
| 14869 |
\edef\POE@key@extnode@xrefs{\POE@key@extnode@xref}% |
| 14870 |
\edef\POE@key@extnode@yrefs{\POE@key@extnode@yref}% |
| 14871 |
\fi |
| 14872 |
}% |
| 14873 |
\def\POE@key@extnode@xref{0}% |
| 14874 |
\def\POE@key@extnode@yref{0}% |
| 14875 |
\def\POE@psset@@extnode#1#2,#3,#4\@nil{% |
| 14876 |
\def\POE@key@extnode@xref{0}% |
| 14877 |
\def\POE@key@extnode@yref{0}% |
| 14878 |
\ifx\@empty#3\@empty |
| 14879 |
\@nameuse{POE@getref@#1}% |
| 14880 |
\@nameuse{POE@getref@#2}% |
| 14881 |
\else |
| 14882 |
\pst@checknum{#1#2}\POE@key@extnode@xref% |
| 14883 |
\pst@checknum{#3}\POE@key@extnode@yref% |
| 14884 |
\fi |
| 14885 |
}% |
| 14886 |
\def\POE@getref@c{}% |
| 14887 |
\def\POE@getref@t{\def\POE@key@extnode@yref{1}}% |
| 14888 |
\def\POE@getref@b{\def\POE@key@extnode@yref{-1}}% |
| 14889 |
\def\POE@getref@l{\def\POE@key@extnode@xref{-1}}% |
| 14890 |
\def\POE@getref@r{\def\POE@key@extnode@xref{1}}% |
| 14891 |
\psset[optexp]{% |
| 14892 |
extnode=\@empty, |
| 14893 |
extnodealign=absolute |
| 14894 |
}% |
| 14895 |
% \end{macrocode} |
| 14896 |
% Set the rotation reference point. For this to work properly, the components |
| 14897 |
% must define a proper \cs{component@ref} macro which sets the origin and |
| 14898 |
% sizes. See below for detailed information. |
| 14899 |
% \begin{macrocode} |
| 14900 |
\define@key[psset]{optexp}{rotateref}{% |
| 14901 |
\def\POE@temp{#1}% |
| 14902 |
\ifx\@empty\POE@temp\else |
| 14903 |
\pst@expandafter\POE@psset@@rotateref{#1}\@empty,,\@nil |
| 14904 |
\fi |
| 14905 |
}% |
| 14906 |
\def\POE@key@rotate@xref{0}% |
| 14907 |
\def\POE@key@rotate@yref{0}% |
| 14908 |
\def\POE@psset@@rotateref#1#2,#3,#4\@nil{% |
| 14909 |
\def\POE@key@rotate@xref{0}% |
| 14910 |
\def\POE@key@rotate@yref{0}% |
| 14911 |
\ifx\@empty#3\@empty |
| 14912 |
\@nameuse{POE@getref@rotate@#1}% |
| 14913 |
\@nameuse{POE@getref@rotate@#2}% |
| 14914 |
\else |
| 14915 |
\pst@checknum{#1#2}\POE@key@rotate@xref% |
| 14916 |
\pst@checknum{#3}\POE@key@rotate@yref% |
| 14917 |
\fi}% |
| 14918 |
\def\POE@getref@rotate@c{}% |
| 14919 |
\def\POE@getref@rotate@t{\def\POE@key@rotate@yref{1}}% |
| 14920 |
\def\POE@getref@rotate@b{\def\POE@key@rotate@yref{-1}}% |
| 14921 |
\def\POE@getref@rotate@l{\def\POE@key@rotate@xref{-1}}% |
| 14922 |
\def\POE@getref@rotate@r{\def\POE@key@rotate@xref{1}}% |
| 14923 |
\psset[optexp]{rotateref=c}% |
| 14924 |
% \end{macrocode} |
| 14925 |
% Naming parameters. |
| 14926 |
% \begin{macrocode} |
| 14927 |
\edef\POE@str@basicname@default{@}% |
| 14928 |
\edef\POE@str@basicname@prefix{OE@}% |
| 14929 |
\gdef\POE@str@basicname@sep{}% |
| 14930 |
\edef\POE@str@extnode@postfix{Ext}% |
| 14931 |
\define@key[psset]{optexp}{b@sicname}{% |
| 14932 |
\edef\POE@key@b@sicname{\POE@str@basicname@prefix#1}% |
| 14933 |
}% |
| 14934 |
\define@key[psset]{optexp}{compname}{% |
| 14935 |
\ifPOE@insideobj\else |
| 14936 |
\PackageError{pst-optexp}{compname allowed only inside an object} |
| 14937 |
\fi |
| 14938 |
\edef\POE@temp{#1}% |
| 14939 |
\ifx\POE@temp\@empty |
| 14940 |
\edef\POE@key@compname{\the\POE@cnt}% |
| 14941 |
\else |
| 14942 |
\edef\POE@key@compname{#1}% |
| 14943 |
\fi |
| 14944 |
% \end{macrocode} |
| 14945 |
% check if compname was already defined. |
| 14946 |
% \begin{macrocode} |
| 14947 |
\@expandtwoargs\in@{,\POE@key@compname,}{,\POE@complist,}% |
| 14948 |
\ifin@ |
| 14949 |
\PackageWarning{pst-optexp}{% |
| 14950 |
^^Jcompname '\POE@key@compname' already used,\MessageBreak |
| 14951 |
previous nodes will be overwritten!^^J |
| 14952 |
}% |
| 14953 |
\else |
| 14954 |
% \end{macrocode} |
| 14955 |
% |
| 14956 |
% Use definition of \cs{XKV@addtolist@x} with an \cs{xdef} instead of \cs{edef} in order to keep the bookkeeping global. |
| 14957 |
% \begin{macrocode} |
| 14958 |
\xdef\POE@complist{% |
| 14959 |
\POE@key@compname\ifx\POE@complist\@empty\else,\fi\POE@complist |
| 14960 |
}% |
| 14961 |
\fi |
| 14962 |
}% |
| 14963 |
\POE@insideobjtrue |
| 14964 |
\psset[optexp]{compname=\@empty} |
| 14965 |
\POE@insideobjfalse |
| 14966 |
% \end{macrocode} |
| 14967 |
% Error handling. |
| 14968 |
% \begin{macrocode} |
| 14969 |
\define@boolkey[psset]{optexp}[POE@]{pswarning}[true]{} |
| 14970 |
\psset[optexp]{pswarning=false}% |
| 14971 |
% \end{macrocode} |
| 14972 |
% |
| 14973 |
% \subsection{Free-ray component parameters} |
| 14974 |
% Lens |
| 14975 |
% \begin{macrocode} |
| 14976 |
\define@key[psset]{optexp}{lensheight}{% |
| 14977 |
\pst@checknum{#1}\POE@key@lensheight |
| 14978 |
} |
| 14979 |
\define@key[psset]{optexp}{lenswidth}{% |
| 14980 |
\pst@checknum{#1}\POE@key@lenswidth |
| 14981 |
\ifdim\POE@key@lenswidth pt > 0pt |
| 14982 |
\psset[optexp]{thicklens=true} |
| 14983 |
\fi |
| 14984 |
} |
| 14985 |
\define@key[psset]{optexp}{lensradiusleft}{% |
| 14986 |
\pst@checknum{#1}\POE@key@lensradiusleft |
| 14987 |
} |
| 14988 |
\define@key[psset]{optexp}{lensradiusright}{% |
| 14989 |
\pst@checknum{#1}\POE@key@lensradiusright |
| 14990 |
} |
| 14991 |
\define@boolkey[psset]{optexp}[POE@]{thicklens}[true]{} |
| 14992 |
\define@key[psset]{optexp}{lensradius}{% |
| 14993 |
\pst@expandafter\POE@psset@@lensradius{#1} {} {} {}\@nil |
| 14994 |
}% |
| 14995 |
\def\POE@psset@@lensradius#1 #2 #3\@nil{% |
| 14996 |
\edef\POE@temp{#1}% |
| 14997 |
\ifx\POE@temp\@empty\else |
| 14998 |
\psset[optexp]{lensradiusleft=#1}% |
| 14999 |
\fi |
| 15000 |
\edef\POE@temp{#2}% |
| 15001 |
\ifx\POE@temp\@empty |
| 15002 |
\psset[optexp]{lensradiusright=#1}% |
| 15003 |
\else |
| 15004 |
\psset[optexp]{lensradiusright=#2}% |
| 15005 |
\fi |
| 15006 |
}% |
| 15007 |
\define@key[psset]{optexp}{lens}{% |
| 15008 |
\pst@expandafter\POE@psset@@lens{#1} {} {} {} {} {}\@nil |
| 15009 |
}% |
| 15010 |
\def\POE@psset@@lens#1 #2 #3 #4 #5\@nil{% |
| 15011 |
\edef\POE@temp{#4}% |
| 15012 |
\ifx\POE@temp\@empty\else |
| 15013 |
\expandafter\ifx\POE@temp.\else |
| 15014 |
\psset[optexp]{lenswidth=#4}% |
| 15015 |
\fi |
| 15016 |
\fi |
| 15017 |
\edef\POE@temp{#3}% |
| 15018 |
\ifx\POE@temp\@empty\else |
| 15019 |
\expandafter\ifx\POE@temp.\else |
| 15020 |
\psset[optexp]{lensheight=#3} |
| 15021 |
\fi |
| 15022 |
\fi |
| 15023 |
\edef\POE@temp{#2}% |
| 15024 |
\ifx\POE@temp\@empty |
| 15025 |
\psset[optexp]{lensradiusright=#1}% |
| 15026 |
\else |
| 15027 |
\expandafter\ifx\POE@temp.\else |
| 15028 |
\psset[optexp]{lensradiusright=#2}% |
| 15029 |
\fi |
| 15030 |
\fi |
| 15031 |
\edef\POE@temp{#1}% |
| 15032 |
\expandafter\ifx\POE@temp.\else |
| 15033 |
\psset[optexp]{lensradiusleft=#1}% |
| 15034 |
\fi |
| 15035 |
}% |
| 15036 |
\psset[optexp]{% |
| 15037 |
lenswidth=0, |
| 15038 |
lensheight=1, |
| 15039 |
lensradiusleft=1, |
| 15040 |
lensradiusright=1 |
| 15041 |
}% |
| 15042 |
% \end{macrocode} |
| 15043 |
% |
| 15044 |
% \begin{macrocode} |
| 15045 |
\define@key[psset]{optexp}{asphereheight}{% |
| 15046 |
\pst@checknum{#1}\POE@key@asphereheight |
| 15047 |
}% |
| 15048 |
\define@key[psset]{optexp}{aspherewidth}{% |
| 15049 |
\pst@checknum{#1}\POE@key@aspherewidth |
| 15050 |
}% |
| 15051 |
\define@key[psset]{optexp}{asphereradiusleft}{% |
| 15052 |
\pst@checknum{#1}\POE@key@asphereradiusleft |
| 15053 |
}% |
| 15054 |
\define@key[psset]{optexp}{asphereradiusright}{% |
| 15055 |
\pst@checknum{#1}\POE@key@asphereradiusright |
| 15056 |
}% |
| 15057 |
\define@key[psset]{optexp}{asphereconstant}{% |
| 15058 |
\pst@checknum{#1}\POE@key@asphereconstant |
| 15059 |
}% |
| 15060 |
\define@key[psset]{optexp}{aspherecoefficients}{% |
| 15061 |
\pst@expandafter\POE@psset@@aspherecoefficients{#1} {} {} {} {} {}\@nil |
| 15062 |
}% |
| 15063 |
\def\POE@psset@@aspherecoefficients#1 #2 #3 #4 #5\@nil{% |
| 15064 |
\def\POE@key@asphereAfour{0}% |
| 15065 |
\def\POE@key@asphereAsix{0}% |
| 15066 |
\def\POE@key@asphereAeight{0}% |
| 15067 |
\def\POE@key@asphereAten{0}% |
| 15068 |
\ifx\\#1\\\else |
| 15069 |
\def\POE@key@asphereAfour{#1}% |
| 15070 |
\ifx\\#2\\\else |
| 15071 |
\def\POE@key@asphereAsix{#2}% |
| 15072 |
\ifx\\#3\\\else |
| 15073 |
\def\POE@key@asphereAeight{#3}% |
| 15074 |
\ifx\\#4\\\else |
| 15075 |
\def\POE@key@asphereAten{#4}% |
| 15076 |
\fi |
| 15077 |
\fi |
| 15078 |
\fi |
| 15079 |
\fi |
| 15080 |
}% |
| 15081 |
\psset[optexp]{% |
| 15082 |
aspherewidth=0, |
| 15083 |
asphereheight=1, |
| 15084 |
asphereconstant=-1, |
| 15085 |
asphereradiusleft=1, |
| 15086 |
aspherecoefficients=0, |
| 15087 |
asphereradiusright=0 |
| 15088 |
} |
| 15089 |
% \end{macrocode} |
| 15090 |
% Pinhole |
| 15091 |
% \begin{macrocode} |
| 15092 |
\define@key[psset]{optexp}{innerheight}{% |
| 15093 |
\pst@checknum{#1}\POE@key@innerheight |
| 15094 |
} |
| 15095 |
\define@key[psset]{optexp}{outerheight}{% |
| 15096 |
\pst@checknum{#1}\POE@key@outerheight |
| 15097 |
} |
| 15098 |
\define@key[psset]{optexp}{phlinewidth}{% |
| 15099 |
\edef\POE@key@phlinewidth{#1}% |
| 15100 |
} |
| 15101 |
\define@key[psset]{optexp}{phwidth}{% |
| 15102 |
\edef\POE@key@phwidth{#1}% |
| 15103 |
} |
| 15104 |
\psset[optexp]{% |
| 15105 |
phlinewidth=2\pslinewidth, |
| 15106 |
phwidth=0, |
| 15107 |
outerheight=1, |
| 15108 |
innerheight=0.1 |
| 15109 |
}% |
| 15110 |
% \end{macrocode} |
| 15111 |
% Crystal |
| 15112 |
% \begin{macrocode} |
| 15113 |
\define@key[psset]{optexp}{crystalwidth}{% |
| 15114 |
\pst@checknum{#1}\POE@key@crystalwidth |
| 15115 |
} |
| 15116 |
\define@key[psset]{optexp}{crystalheight}{% |
| 15117 |
\pst@checknum{#1}\POE@key@crystalheight |
| 15118 |
} |
| 15119 |
\define@key[psset]{optexp}{crystalsize}{% |
| 15120 |
\pst@expandafter\POE@psset@@crystalsize{#1} {} {} {}\@nil |
| 15121 |
}% |
| 15122 |
\def\POE@psset@@crystalsize#1 #2 #3\@nil{% |
| 15123 |
\ifx\\#2\\% |
| 15124 |
\PackageWarning{pst-optexp}{% |
| 15125 |
Parameter 'crystalsize' requires two numbers.}% |
| 15126 |
\fi |
| 15127 |
\psset[optexp]{crystalwidth=#1}% |
| 15128 |
\psset[optexp]{crystalheight=#2}% |
| 15129 |
}% |
| 15130 |
\define@key[psset]{optexp}{caxislength}{% |
| 15131 |
\pst@checknum{#1}\POE@key@caxislength |
| 15132 |
} |
| 15133 |
\define@boolkey[psset]{optexp}[POE@]{voltage}[true]{} |
| 15134 |
\define@boolkey[psset]{optexp}[POE@]{caxisinv}[true]{} |
| 15135 |
\define@boolkey[psset]{optexp}[POE@]{lamp}[true]{} |
| 15136 |
\psset[optexp]{% |
| 15137 |
crystalwidth=1.4, |
| 15138 |
crystalheight=0.6, |
| 15139 |
caxislength=0.3 |
| 15140 |
}% |
| 15141 |
% \end{macrocode} |
| 15142 |
% Box |
| 15143 |
% \begin{macrocode} |
| 15144 |
\define@key[psset]{optexp}{optboxwidth}{% |
| 15145 |
\pst@checknum{#1}\POE@key@optboxwidth |
| 15146 |
} |
| 15147 |
\define@key[psset]{optexp}{optboxheight}{% |
| 15148 |
\pst@checknum{#1}\POE@key@optboxheight |
| 15149 |
} |
| 15150 |
\define@key[psset]{optexp}{optboxsize}{% |
| 15151 |
\pst@expandafter\POE@psset@@optboxsize{#1} {} {} {}\@nil |
| 15152 |
}% |
| 15153 |
\def\POE@psset@@optboxsize#1 #2 #3\@nil{% |
| 15154 |
\ifx\\#2\\% |
| 15155 |
\PackageWarning{pst-optexp}{% |
| 15156 |
Parameter 'optboxsize' requires two numbers.}% |
| 15157 |
\fi |
| 15158 |
\psset[optexp]{optboxwidth=#1, optboxheight=#2}% |
| 15159 |
}% |
| 15160 |
\psset[optexp]{optboxsize=1.4 0.8}% |
| 15161 |
% \end{macrocode} |
| 15162 |
% |
| 15163 |
% Box |
| 15164 |
% \begin{macrocode} |
| 15165 |
\define@key[psset]{optexp}{sourcewidth}{% |
| 15166 |
\pst@checknum{#1}\POE@key@sourcewidth |
| 15167 |
} |
| 15168 |
\define@key[psset]{optexp}{sourceheight}{% |
| 15169 |
\pst@checknum{#1}\POE@key@sourceheight |
| 15170 |
} |
| 15171 |
\define@key[psset]{optexp}{sourcesize}{% |
| 15172 |
\pst@expandafter\POE@psset@@sourcesize{#1} {} {} {}\@nil |
| 15173 |
}% |
| 15174 |
\def\POE@psset@@sourcesize#1 #2 #3\@nil{% |
| 15175 |
\ifx\\#2\\% |
| 15176 |
\PackageWarning{pst-optexp}{% |
| 15177 |
Parameter 'sourcesize' requires two numbers.}% |
| 15178 |
\fi |
| 15179 |
\psset[optexp]{sourcewidth=#1, sourceheight=#2}% |
| 15180 |
}% |
| 15181 |
\psset[optexp]{sourcesize=1.4 0.8}% |
| 15182 |
% \end{macrocode} |
| 15183 |
% |
| 15184 |
% arrowbox |
| 15185 |
% \begin{macrocode} |
| 15186 |
\define@key[psset]{optexp}{arrowcompwidth}{% |
| 15187 |
\pst@checknum{#1}\POE@key@arrowcompwidth |
| 15188 |
} |
| 15189 |
\define@key[psset]{optexp}{arrowcompheight}{% |
| 15190 |
\pst@checknum{#1}\POE@key@arrowcompheight |
| 15191 |
} |
| 15192 |
\define@key[psset]{optexp}{arrowcompsize}{% |
| 15193 |
\pst@expandafter\POE@psset@@arrowcompsize{#1} {} {} {}\@nil |
| 15194 |
}% |
| 15195 |
\def\POE@psset@@arrowcompsize#1 #2 #3\@nil{% |
| 15196 |
\ifx\\#2\\% |
| 15197 |
\psset[optexp]{arrowcompwidth=#1, arrowcompheight=#1}% |
| 15198 |
\else |
| 15199 |
\psset[optexp]{arrowcompwidth=#1, arrowcompheight=#2}% |
| 15200 |
\fi |
| 15201 |
}% |
| 15202 |
\define@key[psset]{optexp}{arrowcompangle}{% |
| 15203 |
\pst@checknum{#1}\POE@key@arrowcompangle |
| 15204 |
}% |
| 15205 |
\define@choicekey+[psset]{optexp}{arrowcompshape}% |
| 15206 |
[\val\nr]{circle, rectangle}% |
| 15207 |
{\edef\POE@key@arrowcompshape{#1}}% |
| 15208 |
{\PackageError{pst-optexp}{Unknown value '\val' for arrowcompshape}} |
| 15209 |
\psset[optexp]{% |
| 15210 |
arrowcompsize=1.4 0.8, |
| 15211 |
arrowcompangle=70, |
| 15212 |
arrowcompshape=rectangle |
| 15213 |
}% |
| 15214 |
\newpsstyle{ArrowCompStyle}{arrowinset=0, arrows=->}% |
| 15215 |
% \end{macrocode} |
| 15216 |
% BarBox |
| 15217 |
% \begin{macrocode} |
| 15218 |
\define@key[psset]{optexp}{barcompwidth}{% |
| 15219 |
\pst@checknum{#1}\POE@key@barcompwidth |
| 15220 |
} |
| 15221 |
\define@key[psset]{optexp}{barcompheight}{% |
| 15222 |
\pst@checknum{#1}\POE@key@barcompheight |
| 15223 |
} |
| 15224 |
\define@key[psset]{optexp}{barcompsize}{% |
| 15225 |
\pst@expandafter\POE@psset@@barcompsize{#1} {} {} {}\@nil |
| 15226 |
}% |
| 15227 |
\def\POE@psset@@barcompsize#1 #2 #3\@nil{% |
| 15228 |
\ifx\\#2\\% |
| 15229 |
\psset[optexp]{barcompwidth=#1, barcompheight=#1}% |
| 15230 |
\else |
| 15231 |
\psset[optexp]{barcompwidth=#1, barcompheight=#2}% |
| 15232 |
\fi |
| 15233 |
}% |
| 15234 |
\define@key[psset]{optexp}{barcompangle}{% |
| 15235 |
\pst@checknum{#1}\POE@key@barcompangle |
| 15236 |
}% |
| 15237 |
\define@choicekey+[psset]{optexp}{barcompshape}% |
| 15238 |
[\val\nr]{circle, rectangle}% |
| 15239 |
{\edef\POE@key@barcompshape{#1}}% |
| 15240 |
{\PackageError{pst-optexp}{Unknown value '\val' for barcompshape}} |
| 15241 |
\psset[optexp]{% |
| 15242 |
barcompsize=1.4 0.8, |
| 15243 |
barcompangle=70, |
| 15244 |
barcompshape=rectangle |
| 15245 |
}% |
| 15246 |
\newpsstyle{BarCompStyle}{}% |
| 15247 |
% \end{macrocode} |
| 15248 |
% |
| 15249 |
% Plate |
| 15250 |
% \begin{macrocode} |
| 15251 |
\define@key[psset]{optexp}{platelinewidth}{% |
| 15252 |
\edef\POE@key@platelinewidth{#1}% |
| 15253 |
} |
| 15254 |
\define@key[psset]{optexp}{plateheight}{% |
| 15255 |
\pst@checknum{#1}\POE@key@plateheight |
| 15256 |
} |
| 15257 |
\psset[optexp]{% |
| 15258 |
plateheight=1, |
| 15259 |
platelinewidth=2\pslinewidth |
| 15260 |
}% |
| 15261 |
% \end{macrocode} |
| 15262 |
% Optical retardation plate, the height is the same as for \cs{optplate}. |
| 15263 |
% \begin{macrocode} |
| 15264 |
\define@key[psset]{optexp}{platewidth}{% |
| 15265 |
\pst@checknum{#1}\POE@key@platewidth |
| 15266 |
} |
| 15267 |
\define@key[psset]{optexp}{platesize}{% |
| 15268 |
\pst@expandafter\POE@psset@@platesize{#1} {} {} {}\@nil |
| 15269 |
}% |
| 15270 |
\def\POE@psset@@platesize#1 #2 #3\@nil{% |
| 15271 |
\ifx\\#2\\% |
| 15272 |
\PackageWarning{pst-optexp}{% |
| 15273 |
Parameter 'platesize' requires two numbers.}% |
| 15274 |
\fi |
| 15275 |
\psset[optexp]{platewidth=#1, plateheight=#2}% |
| 15276 |
}% |
| 15277 |
\psset[optexp]{platewidth=0.1}% |
| 15278 |
% \end{macrocode} |
| 15279 |
% Detector |
| 15280 |
% \begin{macrocode} |
| 15281 |
\define@key[psset]{optexp}{detsize}{% |
| 15282 |
\pst@expandafter\POE@psset@@detsize{#1} {} {} {}\@nil |
| 15283 |
}% |
| 15284 |
\def\POE@psset@@detsize#1 #2 #3\@nil{% |
| 15285 |
\ifx\\#2\\% |
| 15286 |
\pst@checknum{#1}\POE@key@detsize |
| 15287 |
\else |
| 15288 |
\let\POE@key@detsize\@empty |
| 15289 |
\pst@checknum{#1}\POE@key@detwidth |
| 15290 |
\pst@checknum{#2}\POE@key@detheight |
| 15291 |
\fi |
| 15292 |
}% |
| 15293 |
\define@choicekey*+[psset]{optexp}{dettype}[\val\nr]{round,diode}% |
| 15294 |
{\edef\POE@key@dettype{\val}} |
| 15295 |
{\PackageError{pst-optexp}{Unknown value '\val' for dettype}} |
| 15296 |
\newpsstyle{DetectorStyle}{} |
| 15297 |
\psset[optexp]{% |
| 15298 |
detsize=0.8, |
| 15299 |
dettype=round |
| 15300 |
}% |
| 15301 |
% \end{macrocode} |
| 15302 |
% Polarization |
| 15303 |
% \begin{macrocode} |
| 15304 |
\define@key[psset]{optexp}{polsize}{% |
| 15305 |
\pst@checknum{#1}\POE@key@polsize |
| 15306 |
} |
| 15307 |
% \end{macrocode} |
| 15308 |
% This is defined manually, to avoid printing the warning inside the key definition above. |
| 15309 |
% \begin{macrocode} |
| 15310 |
\newpsstyle{Polarization}{% |
| 15311 |
linewidth=0.7\pslinewidth, |
| 15312 |
arrowscale=0.8, dotsize=3\pslinewidth} |
| 15313 |
\define@choicekey+[psset]{optexp}{poltype}% |
| 15314 |
[\val\nr]{parallel,misc,perp,rcirc,lcirc}% |
| 15315 |
{\edef\POE@key@poltype{#1}} |
| 15316 |
{\PackageError{pst-optexp}{Unknown value '\val' for poltype}% |
| 15317 |
} |
| 15318 |
\psset[optexp]{% |
| 15319 |
poltype=parallel, |
| 15320 |
polsize=0.6 |
| 15321 |
}% |
| 15322 |
% \end{macrocode} |
| 15323 |
% Optical diode |
| 15324 |
% \begin{macrocode} |
| 15325 |
\define@key[psset]{optexp}{optdiodesize}{% |
| 15326 |
\pst@checknum{#1}\POE@key@optdiodesize |
| 15327 |
} |
| 15328 |
\psset[optexp]{optdiodesize=0.8}% |
| 15329 |
% \end{macrocode} |
| 15330 |
% Dove prism |
| 15331 |
% \begin{macrocode} |
| 15332 |
\define@key[psset]{optexp}{doveprismsize}{% |
| 15333 |
\pst@expandafter\POE@psset@@doveprismsize{#1} {} {} {}\@nil |
| 15334 |
}% |
| 15335 |
\def\POE@psset@@doveprismsize#1 #2 #3\@nil{% |
| 15336 |
\ifx\\#2\\% |
| 15337 |
\pst@checknum{#1}\POE@key@doveprismheight |
| 15338 |
\pstFPmul\POE@key@doveprismwidth{3}{#1} |
| 15339 |
\else |
| 15340 |
\pst@checknum{#1}\POE@key@doveprismwidth |
| 15341 |
\pst@checknum{#2}\POE@key@doveprismheight |
| 15342 |
\fi |
| 15343 |
}% |
| 15344 |
\psset[optexp]{doveprismsize=0.6}% |
| 15345 |
% \end{macrocode} |
| 15346 |
% Glan-Thompson prism |
| 15347 |
% \begin{macrocode} |
| 15348 |
\define@key[psset]{optexp}{glanthompsongap}{% |
| 15349 |
\pst@checknum{#1}\POE@key@glanthompsongap |
| 15350 |
}% |
| 15351 |
\define@key[psset]{optexp}{glanthompsonwidth}{% |
| 15352 |
\pst@checknum{#1}\POE@key@glanthompsonwidth |
| 15353 |
}% |
| 15354 |
\define@key[psset]{optexp}{glanthompsonheight}{% |
| 15355 |
\pst@checknum{#1}\POE@key@glanthompsonheight |
| 15356 |
}% |
| 15357 |
\define@key[psset]{optexp}{glanthompsonsize}{% |
| 15358 |
\pst@expandafter\POE@psset@@glanthompsonsize{#1} {} {} {}\@nil |
| 15359 |
}% |
| 15360 |
\def\POE@psset@@glanthompsonsize#1 #2 #3\@nil{% |
| 15361 |
\ifx\\#2\\% |
| 15362 |
\PackageWarning{pst-optexp}{% |
| 15363 |
Parameter 'glanthompsonsize' requires two numbers.}% |
| 15364 |
\fi |
| 15365 |
\psset[optexp]{glanthompsonwidth=#1, glanthompsonheight=#2}% |
| 15366 |
}% |
| 15367 |
\psset[optexp]{% |
| 15368 |
glanthompsongap=0, |
| 15369 |
glanthompsonsize=1 0.5 |
| 15370 |
}% |
| 15371 |
% \end{macrocode} |
| 15372 |
% Beamsplitter |
| 15373 |
% \begin{macrocode} |
| 15374 |
\define@key[psset]{optexp}{bssize}{% |
| 15375 |
\pst@checknum{#1}\POE@key@bssize |
| 15376 |
} |
| 15377 |
\define@key[psset]{optexp}{bsstyle}{% |
| 15378 |
\edef\POE@key@bsstyle{#1}% |
| 15379 |
} |
| 15380 |
\psset[optexp]{% |
| 15381 |
bssize=0.8, |
| 15382 |
bsstyle=cube |
| 15383 |
}% |
| 15384 |
% \end{macrocode} |
| 15385 |
% Mirror |
| 15386 |
% \begin{macrocode} |
| 15387 |
\define@key[psset]{optexp}{mirrorwidth}{% |
| 15388 |
\pst@checknum{#1}\POE@key@mirrorwidth |
| 15389 |
} |
| 15390 |
\define@key[psset]{optexp}{mirrorlinewidth}{% |
| 15391 |
\edef\POE@key@mirrorlinewidth{#1}% |
| 15392 |
} |
| 15393 |
\define@choicekey*[psset]{optexp}{mirrortype}% |
| 15394 |
[\val\nr]{piezo,extended,plain,semitrans}{% |
| 15395 |
\edef\POE@key@mirrortype{#1}% |
| 15396 |
} |
| 15397 |
\define@key[psset]{optexp}{mirrordepth}{% |
| 15398 |
\pst@checknum{#1}\POE@key@mirrordepth |
| 15399 |
} |
| 15400 |
\define@key[psset]{optexp}{mirrorradius}{% |
| 15401 |
\pst@expandafter\POE@psset@@mirrorradius{#1} {} {} {}\@nil |
| 15402 |
}% |
| 15403 |
\def\POE@psset@@mirrorradius#1 #2 #3\@nil{% |
| 15404 |
\pst@checknum{#1}\POE@key@mirrorradius |
| 15405 |
\ifx\\#2\\% |
| 15406 |
\def\POE@key@mirrorradiusB{}% |
| 15407 |
\else |
| 15408 |
\pst@checknum{#2}\POE@key@mirrorradiusB |
| 15409 |
\ifdim\POE@key@mirrorradiusB pt=0pt\else |
| 15410 |
\PackageWarning{optexp}{% |
| 15411 |
The second value for option 'mirrorradius' must be 0.}% |
| 15412 |
\fi |
| 15413 |
\fi |
| 15414 |
}% |
| 15415 |
\define@boolkey[psset]{optexp}[POE@]{variable}[true]{} |
| 15416 |
\psset[optexp]{% |
| 15417 |
mirrorwidth=1, |
| 15418 |
mirrordepth=0.15, |
| 15419 |
mirrorradius=0, |
| 15420 |
mirrortype=plain, |
| 15421 |
mirrorlinewidth=2\pslinewidth |
| 15422 |
}% |
| 15423 |
% \end{macrocode} |
| 15424 |
% |
| 15425 |
% Parabolic mirror |
| 15426 |
% \begin{macrocode} |
| 15427 |
\define@key[psset]{optexp}{parmirrorwidth}{% |
| 15428 |
\pst@checknum{#1}\POE@key@parmirrorwidth |
| 15429 |
} |
| 15430 |
\define@key[psset]{optexp}{parmirrorheight}{% |
| 15431 |
\pst@checknum{#1}\POE@key@parmirrorheight |
| 15432 |
} |
| 15433 |
\psset[optexp]{% |
| 15434 |
parmirrorwidth=1, |
| 15435 |
parmirrorheight=1 |
| 15436 |
}% |
| 15437 |
% \end{macrocode} |
| 15438 |
% |
| 15439 |
% Off-axis parabolic mirror |
| 15440 |
% \begin{macrocode} |
| 15441 |
\define@key[psset]{optexp}{oapmirroraperture}{% |
| 15442 |
\pst@expandafter\POE@psset@@oapmirroraperture{#1} {} {} {}\@nil |
| 15443 |
}% |
| 15444 |
\def\POE@psset@@oapmirroraperture#1 #2 #3\@nil{% |
| 15445 |
\ifx\\#2\\% |
| 15446 |
\def\POE@key@oapmirroraperture@outer{#1 0.5 mul} |
| 15447 |
\def\POE@key@oapmirroraperture@inner{#1 0.5 mul} |
| 15448 |
\else |
| 15449 |
\pst@checknum{#1}\POE@key@oapmirroraperture@inner |
| 15450 |
\pst@checknum{#2}\POE@key@oapmirroraperture@outer |
| 15451 |
\fi |
| 15452 |
}% |
| 15453 |
\psset[optexp]{oapmirroraperture=1} |
| 15454 |
% \end{macrocode} |
| 15455 |
% |
| 15456 |
% Axicon |
| 15457 |
% \begin{macrocode} |
| 15458 |
\define@key[psset]{optexp}{axiconheight}{% |
| 15459 |
\pst@checknum{#1}\POE@key@axiconheight |
| 15460 |
}% |
| 15461 |
\define@key[psset]{optexp}{axiconwidth}{% |
| 15462 |
\pst@checknum{#1}\POE@key@axiconwidth |
| 15463 |
}% |
| 15464 |
\define@key[psset]{optexp}{axiconangle}{% |
| 15465 |
\pst@checknum{#1}\POE@key@axiconangle |
| 15466 |
}% |
| 15467 |
\psset[optexp]{axiconheight=1.5, axiconwidth=0.4, axiconangle=10} |
| 15468 |
% \end{macrocode} |
| 15469 |
% |
| 15470 |
% Wedge |
| 15471 |
% \begin{macrocode} |
| 15472 |
\define@key[psset]{optexp}{wedgeangles}{% |
| 15473 |
\pst@expandafter\POE@psset@@wedgeangles{#1} {} {} {}\@nil |
| 15474 |
}% |
| 15475 |
\def\POE@psset@@wedgeangles#1 #2 #3\@nil{% |
| 15476 |
\pst@checknum{#1}\POE@key@wedgeangleleft |
| 15477 |
\ifx\\#2\\% |
| 15478 |
\pst@checknum{#1}\POE@key@wedgeangleright |
| 15479 |
\else |
| 15480 |
\pst@checknum{#2}\POE@key@wedgeangleright |
| 15481 |
\fi |
| 15482 |
}% |
| 15483 |
\define@key[psset]{optexp}{wedgeangleleft}{% |
| 15484 |
\pst@checknum{#1}\POE@key@wedgeangleleft |
| 15485 |
}% |
| 15486 |
\define@key[psset]{optexp}{wedgeangleright}{% |
| 15487 |
\pst@checknum{#1}\POE@key@wedgeangleright |
| 15488 |
}% |
| 15489 |
\define@key[psset]{optexp}{wedgeheight}{% |
| 15490 |
\pst@checknum{#1}\POE@key@wedgeheight |
| 15491 |
}% |
| 15492 |
\define@key[psset]{optexp}{wedgewidth}{% |
| 15493 |
\pst@checknum{#1}\POE@key@wedgewidth |
| 15494 |
}% |
| 15495 |
\psset[optexp]{% |
| 15496 |
wedgeangles=0 10, |
| 15497 |
wedgeheight=0.8, |
| 15498 |
wedgewidth=0 |
| 15499 |
}% |
| 15500 |
% \end{macrocode} |
| 15501 |
% Grating |
| 15502 |
% \begin{macrocode} |
| 15503 |
\define@key[psset]{optexp}{gratingcount}{% |
| 15504 |
\pst@checknum{#1}\POE@key@gratingcount |
| 15505 |
} |
| 15506 |
\define@key[psset]{optexp}{gratingwidth}{% |
| 15507 |
\pst@checknum{#1}\POE@key@gratingwidth |
| 15508 |
} |
| 15509 |
\define@key[psset]{optexp}{gratingheight}{% |
| 15510 |
\pst@checknum{#1}\POE@key@gratingheight |
| 15511 |
} |
| 15512 |
\define@choicekey*[psset]{optexp}{gratingtype}% |
| 15513 |
[\val\nr]{binary,blazed}{% |
| 15514 |
\edef\POE@key@gratingtype{#1}% |
| 15515 |
} |
| 15516 |
\define@key[psset]{optexp}{gratingdepth}{% |
| 15517 |
\pst@checknum{#1}\POE@key@gratingdepth |
| 15518 |
} |
| 15519 |
\define@key[psset]{optexp}{gratinglinewidth}{% |
| 15520 |
\edef\POE@key@gratinglinewidth{#1}% |
| 15521 |
} |
| 15522 |
\define@choicekey+[psset]{optexp}{gratingalign}% |
| 15523 |
[\val\nr]{t,c,top,center}% |
| 15524 |
{% |
| 15525 |
\ifcase\nr\relax |
| 15526 |
\let\POE@key@gratingalign\POE@str@top |
| 15527 |
\or |
| 15528 |
\let\POE@key@gratingalign\POE@str@center |
| 15529 |
\else |
| 15530 |
\def\POE@key@gratingalign{#1}% |
| 15531 |
\fi}% |
| 15532 |
{\PackageError{pst-optexp}{Unknown value '\val' for gratingalign}} |
| 15533 |
\define@boolkey[psset]{optexp}[POE@]{reverse}[true]{} |
| 15534 |
\psset[optexp]{% |
| 15535 |
gratingcount=10, |
| 15536 |
gratingwidth=1, |
| 15537 |
gratingheight=0.15, |
| 15538 |
gratingdepth=0.075, |
| 15539 |
gratingtype=blazed, |
| 15540 |
gratinglinewidth=0.7\pslinewidth, |
| 15541 |
gratingalign=t |
| 15542 |
}% |
| 15543 |
% \end{macrocode} |
| 15544 |
% Penta prism |
| 15545 |
% \begin{macrocode} |
| 15546 |
\define@key[psset]{optexp}{pentaprismsize}{% |
| 15547 |
\pst@checknum{#1}\POE@key@pentaprismsize |
| 15548 |
} |
| 15549 |
\psset[optexp]{pentaprismsize=0.7} |
| 15550 |
% \end{macrocode} |
| 15551 |
% Right-angle prism |
| 15552 |
% \begin{macrocode} |
| 15553 |
\define@key[psset]{optexp}{raprismsize}{% |
| 15554 |
\pst@checknum{#1}\POE@key@raprismsize |
| 15555 |
} |
| 15556 |
\define@choicekey+[psset]{optexp}{raprismalign}[\val\nr]% |
| 15557 |
{auto,center}% |
| 15558 |
{\def\POE@key@raprismalign{#1}}% |
| 15559 |
{\PackageError{pst-optexp}{Unknown value '\val' for raprismalign}}% |
| 15560 |
\psset[optexp]{% |
| 15561 |
raprismsize=1.5, |
| 15562 |
raprismalign=auto |
| 15563 |
} |
| 15564 |
% \end{macrocode} |
| 15565 |
% Prism |
| 15566 |
% \begin{macrocode} |
| 15567 |
\define@key[psset]{optexp}{prismsize}{% |
| 15568 |
\pst@checknum{#1}\POE@key@prismsize |
| 15569 |
} |
| 15570 |
\define@key[psset]{optexp}{prismangle}{% |
| 15571 |
\pst@checknum{#1}\POE@key@prismangle |
| 15572 |
} |
| 15573 |
\define@choicekey+[psset]{optexp}{prismalign}[\val\nr]% |
| 15574 |
{auto,center}% |
| 15575 |
{\def\POE@key@prismalign{#1}}% |
| 15576 |
{\PackageError{pst-optexp}{Unknown value '\val' for prismalign}}% |
| 15577 |
\define@choicekey+[psset]{optexp}{prismtype}[\val\nr]% |
| 15578 |
{transmittive, reflective, coupling}% |
| 15579 |
{\def\POE@key@prismtype{#1}}% |
| 15580 |
{\PackageError{pst-optexp}{Unknown value '\val' for prismtype}}% |
| 15581 |
\psset[optexp]{% |
| 15582 |
prismsize=1, |
| 15583 |
prismangle=60, |
| 15584 |
prismalign=auto, |
| 15585 |
prismtype=transmittive |
| 15586 |
}% |
| 15587 |
% \end{macrocode} |
| 15588 |
% |
| 15589 |
% Optdipole and Opttripole |
| 15590 |
% \begin{macrocode} |
| 15591 |
\define@key[psset]{optexp}{optdipolesize}{% |
| 15592 |
\pst@expandafter\POE@psset@@optdipolesize{#1} {} {} {}\@nil |
| 15593 |
}% |
| 15594 |
\def\POE@psset@@optdipolesize#1 #2 #3\@nil{% |
| 15595 |
\ifx\\#2\\% |
| 15596 |
\def\POE@key@optdipoleheight{0}% |
| 15597 |
\else |
| 15598 |
\pst@checknum{#2}\POE@key@optdipoleheight |
| 15599 |
\fi |
| 15600 |
\pst@checknum{#1}\POE@key@optdipolewidth |
| 15601 |
}% |
| 15602 |
\define@key[psset]{optexp}{optdipolecomp}{% |
| 15603 |
\def\POE@key@optdipolecomp{#1}% |
| 15604 |
} |
| 15605 |
\define@key[psset]{optexp}{opttripolecomp}{% |
| 15606 |
\def\POE@key@opttripolecomp{#1}% |
| 15607 |
} |
| 15608 |
\psset[optexp]{% |
| 15609 |
optdipolesize=0 0, |
| 15610 |
optdipolecomp=, |
| 15611 |
opttripolecomp=% |
| 15612 |
}% |
| 15613 |
% \end{macrocode} |
| 15614 |
% |
| 15615 |
% acousto-optic modulator |
| 15616 |
% \begin{macrocode} |
| 15617 |
\define@key[psset]{optexp}{aomwidth}{% |
| 15618 |
\pst@checknum{#1}\POE@key@aomwidth |
| 15619 |
}% |
| 15620 |
\define@key[psset]{optexp}{aomheight}{% |
| 15621 |
\pst@checknum{#1}\POE@key@aomheight |
| 15622 |
}% |
| 15623 |
\define@key[psset]{optexp}{aomsize}{% |
| 15624 |
\pst@expandafter\POE@psset@@aomsize{#1} {} {} {}\@nil |
| 15625 |
}% |
| 15626 |
\define@key[psset]{optexp}{aomgratingcount}{% |
| 15627 |
\edef\POE@key@aomgratingcount{#1}% |
| 15628 |
}% |
| 15629 |
\define@choicekey+[psset]{optexp}{aomalign}% |
| 15630 |
[\val\nr]{sym,symmetric,straight}% |
| 15631 |
{% |
| 15632 |
\ifcase\nr\relax |
| 15633 |
\let\POE@key@aomalign\POE@str@symmetric |
| 15634 |
\else |
| 15635 |
\def\POE@key@aomalign{#1}% |
| 15636 |
\fi |
| 15637 |
}% |
| 15638 |
{\PackageError{pst-optexp}{Unknown value '\val' for aomalign}}% |
| 15639 |
\define@choicekey+[psset]{optexp}{aomreflalign}% |
| 15640 |
[\val\nr]{perp,parallel}% |
| 15641 |
{\def\POE@key@aomreflalign{#1}}% |
| 15642 |
{\PackageError{pst-optexp}{Unknown value '\val' for aomreflalign}}% |
| 15643 |
\def\POE@psset@@aomsize#1 #2 #3\@nil{% |
| 15644 |
\ifx\\#2\\% |
| 15645 |
\PackageWarning{pst-optexp}{% |
| 15646 |
Parameter 'aomsize' requires two numbers.}% |
| 15647 |
\fi |
| 15648 |
\psset[optexp]{aomwidth=#1, aomheight=#2}% |
| 15649 |
}% |
| 15650 |
\define@key[psset]{optexp}{aomcomp}{% |
| 15651 |
\def\POE@key@aomcomp{#1}% |
| 15652 |
}% |
| 15653 |
\define@key[psset]{optexp}{diffractionorders}{% |
| 15654 |
\def\POE@key@diffractionorders{#1}% |
| 15655 |
}% |
| 15656 |
\define@key[psset]{optexp}{beamdiffractionorder}{% |
| 15657 |
\def\POE@key@beamdiffractionorder{#1}% |
| 15658 |
}% |
| 15659 |
\psset[optexp]{% |
| 15660 |
aomsize=1.5 1, |
| 15661 |
aomcomp=default, |
| 15662 |
aomalign=sym, |
| 15663 |
aomreflalign=parallel, |
| 15664 |
aomgratingcount=9, |
| 15665 |
diffractionorders=2, |
| 15666 |
beamdiffractionorder= |
| 15667 |
}% |
| 15668 |
% \end{macrocode} |
| 15669 |
% |
| 15670 |
% \subsection{Parameters of fiber-optical components} |
| 15671 |
% \subsubsection{fiber} |
| 15672 |
% \begin{macrocode} |
| 15673 |
\define@key[psset]{optexp}{fiberloops}{% |
| 15674 |
\pst@checknum{#1}\POE@key@fiberloops |
| 15675 |
} |
| 15676 |
\define@key[psset]{optexp}{fiberloopradius}{% |
| 15677 |
\pst@checknum{#1}\POE@key@fiberloopradius |
| 15678 |
} |
| 15679 |
\define@key[psset]{optexp}{fiberloopsep}{% |
| 15680 |
\pst@checknum{#1}\POE@key@fiberloopsep |
| 15681 |
} |
| 15682 |
\psset[optexp]{% |
| 15683 |
fiberloops=3, |
| 15684 |
fiberloopradius=0.4, |
| 15685 |
fiberloopsep=0.2 |
| 15686 |
}% |
| 15687 |
% \end{macrocode} |
| 15688 |
% \subsubsection{optfilter} |
| 15689 |
% \begin{macrocode} |
| 15690 |
\define@key[psset]{optexp}{filtersize}{% |
| 15691 |
\pst@checknum{#1}\POE@key@filtersize |
| 15692 |
} |
| 15693 |
\define@choicekey+[psset]{optexp}{filtertype}[\val\nr]% |
| 15694 |
{bandstop,bandpass,lowpass,highpass}% |
| 15695 |
{\def\POE@key@filtertype{#1}}% |
| 15696 |
{\PackageError{pst-optexp}{Unknown value '\val' for filtertype}} |
| 15697 |
\define@key[psset]{optexp}{filterangle}{% |
| 15698 |
\pst@checknum{#1}\POE@key@filterangle |
| 15699 |
} |
| 15700 |
\newpsstyle{FilterStyle}{} |
| 15701 |
\psset[optexp]{% |
| 15702 |
filterangle=0, |
| 15703 |
filtersize=0.8, |
| 15704 |
filtertype=bandpass |
| 15705 |
}% |
| 15706 |
% \end{macrocode} |
| 15707 |
% Polarization controller |
| 15708 |
% \begin{macrocode} |
| 15709 |
\define@key[psset]{optexp}{polcontrolsize}{% |
| 15710 |
\pst@checknum{#1}\POE@key@polcontrolsize |
| 15711 |
} |
| 15712 |
\define@choicekey+[psset]{optexp}{polcontroltype}[\val\nr]% |
| 15713 |
{linear,triangle}% |
| 15714 |
{\def\POE@key@polcontroltype{#1}}% |
| 15715 |
{\PackageError{pst-optexp}{Unknown value '\val' for polcontroltype}} |
| 15716 |
\psset[optexp]{% |
| 15717 |
polcontrolsize=0.15, |
| 15718 |
polcontroltype=linear |
| 15719 |
}% |
| 15720 |
% \end{macrocode} |
| 15721 |
% |
| 15722 |
% \subsubsection{optamp} |
| 15723 |
% \begin{macrocode} |
| 15724 |
\define@key[psset]{optexp}{optampsize}{% |
| 15725 |
\pst@expandafter\POE@psset@@optampsize{#1} {} {} {}\@nil |
| 15726 |
}% |
| 15727 |
\def\POE@psset@@optampsize#1 #2 #3\@nil{% |
| 15728 |
\ifx\\#2\\% |
| 15729 |
\pst@checknum{#1}\POE@key@optampheight |
| 15730 |
\pstFPmul\POE@key@optampwidth{0.866}{#1} |
| 15731 |
\else |
| 15732 |
\pst@checknum{#1}\POE@key@optampwidth |
| 15733 |
\pst@checknum{#2}\POE@key@optampheight |
| 15734 |
\fi |
| 15735 |
}% |
| 15736 |
\psset[optexp]{optampsize=0.8} |
| 15737 |
% \end{macrocode} |
| 15738 |
% Mach-Zehnder modulator |
| 15739 |
% \begin{macrocode} |
| 15740 |
\define@key[psset]{optexp}{optmzmsize}{% |
| 15741 |
\pst@expandafter\POE@psset@@optmzmsize{#1} {} {} {}\@nil |
| 15742 |
}% |
| 15743 |
\def\POE@psset@@optmzmsize#1 #2 #3\@nil{% |
| 15744 |
\ifx\\#2\\% |
| 15745 |
\pst@checknum{#1}\POE@key@optmzmheight |
| 15746 |
\pstFPmul\POE@key@optmzmwidth{1.6}{#1} |
| 15747 |
\else |
| 15748 |
\pst@checknum{#1}\POE@key@optmzmwidth |
| 15749 |
\pst@checknum{#2}\POE@key@optmzmheight |
| 15750 |
\fi |
| 15751 |
}% |
| 15752 |
\psset[optexp]{optmzmsize=0.8} |
| 15753 |
% \end{macrocode} |
| 15754 |
% \subsubsection{Isolator} |
| 15755 |
% \begin{macrocode} |
| 15756 |
\define@key[psset]{optexp}{isolatorsize}{% |
| 15757 |
\pst@expandafter\POE@psset@@isolatorsize{#1} {} {} {}\@nil |
| 15758 |
}% |
| 15759 |
\def\POE@psset@@isolatorsize#1 #2 #3\@nil{% |
| 15760 |
\ifx\\#2\\% |
| 15761 |
\pst@checknum{#1}\POE@key@isolatorheight |
| 15762 |
\pstFPmul\POE@key@isolatorwidth{1.6}{#1} |
| 15763 |
\else |
| 15764 |
\pst@checknum{#1}\POE@key@isolatorwidth |
| 15765 |
\pst@checknum{#2}\POE@key@isolatorheight |
| 15766 |
\fi |
| 15767 |
}% |
| 15768 |
\psset[optexp]{isolatorsize=0.6}% |
| 15769 |
% \end{macrocode} |
| 15770 |
% Fiber polarizer |
| 15771 |
% \begin{macrocode} |
| 15772 |
\define@key[psset]{optexp}{fiberpolsize}{% |
| 15773 |
\pst@expandafter\POE@psset@@fiberpolsize{#1} {} {} {}\@nil |
| 15774 |
}% |
| 15775 |
\def\POE@psset@@fiberpolsize#1 #2 #3\@nil{% |
| 15776 |
\ifx\\#2\\% |
| 15777 |
\pst@checknum{#1}\POE@key@fiberpolheight |
| 15778 |
\pstFPmul\POE@key@fiberpolwidth{1.6}{#1} |
| 15779 |
\else |
| 15780 |
\pst@checknum{#1}\POE@key@fiberpolwidth |
| 15781 |
\pst@checknum{#2}\POE@key@fiberpolheight |
| 15782 |
\fi |
| 15783 |
}% |
| 15784 |
\psset[optexp]{fiberpolsize=0.6}% |
| 15785 |
% \end{macrocode} |
| 15786 |
% Optical switch |
| 15787 |
% \begin{macrocode} |
| 15788 |
\define@key[psset]{optexp}{switchsize}{% |
| 15789 |
\pst@expandafter\POE@psset@@switchsize{#1} {} {} {}\@nil |
| 15790 |
}% |
| 15791 |
\def\POE@psset@@switchsize#1 #2 #3\@nil{% |
| 15792 |
\pst@checknum{#1}\POE@key@switchwidth |
| 15793 |
\ifx\\#2\\% |
| 15794 |
\pst@checknum{#1}\POE@key@switchheight |
| 15795 |
\else |
| 15796 |
\pst@checknum{#2}\POE@key@switchheight |
| 15797 |
\fi |
| 15798 |
}% |
| 15799 |
\define@choicekey+[psset]{optexp}{switchstyle}% |
| 15800 |
[\val\nr]{opened,closed}% |
| 15801 |
{\edef\POE@key@switchstyle{#1}}% |
| 15802 |
{\PackageError{pst-optexp}{Unknown value '\val' for switchstyle}} |
| 15803 |
\psset[optexp]{% |
| 15804 |
switchsize=0.8, |
| 15805 |
switchstyle=opened |
| 15806 |
}% |
| 15807 |
% \end{macrocode} |
| 15808 |
% \subsubsection{Fiber delay line} |
| 15809 |
% \begin{macrocode} |
| 15810 |
\define@key[psset]{optexp}{fdlsize}{% |
| 15811 |
\pst@expandafter\POE@psset@@fdlsize{#1} {} {} {}\@nil |
| 15812 |
}% |
| 15813 |
\def\POE@psset@@fdlsize#1 #2 #3\@nil{% |
| 15814 |
\ifx\\#2\\% |
| 15815 |
\pst@checknum{#1}\POE@key@fdlheight |
| 15816 |
\pstFPmul\POE@key@fdlwidth{1.6}{#1} |
| 15817 |
\else |
| 15818 |
\pst@checknum{#1}\POE@key@fdlwidth |
| 15819 |
\pst@checknum{#2}\POE@key@fdlheight |
| 15820 |
\fi |
| 15821 |
}% |
| 15822 |
\psset[optexp]{fdlsize=0.6}% |
| 15823 |
% \end{macrocode} |
| 15824 |
% Fiber collimator |
| 15825 |
% \begin{macrocode} |
| 15826 |
\define@key[psset]{optexp}{fibercolsize}{% |
| 15827 |
\pst@expandafter\POE@psset@@fibercolsize{#1} {} {} {}\@nil |
| 15828 |
}% |
| 15829 |
\def\POE@psset@@fibercolsize#1 #2 #3\@nil{% |
| 15830 |
\ifx\\#2\\% |
| 15831 |
\pst@checknum{#1}\POE@key@fibercolheight |
| 15832 |
\pstFPmul\POE@key@fibercolwidth{0.866}{#1} |
| 15833 |
\else |
| 15834 |
\pst@checknum{#1}\POE@key@fibercolwidth |
| 15835 |
\pst@checknum{#2}\POE@key@fibercolheight |
| 15836 |
\fi |
| 15837 |
}% |
| 15838 |
\psset[optexp]{fibercolsize=0.3}% |
| 15839 |
% \end{macrocode} |
| 15840 |
% Optical Circulator |
| 15841 |
% \begin{macrocode} |
| 15842 |
\define@key[psset]{optexp}{optcircsize}{% |
| 15843 |
\pst@checknum{#1}\POE@key@optcircsize |
| 15844 |
}% |
| 15845 |
\define@key[psset]{optexp}{optcircangleA}{% |
| 15846 |
\pst@checknum{#1}\POE@key@optcircangleA |
| 15847 |
}% |
| 15848 |
\define@key[psset]{optexp}{optcircangleB}{% |
| 15849 |
\pst@checknum{#1}\POE@key@optcircangleB |
| 15850 |
}% |
| 15851 |
\define@key[psset]{optexp}{optcircangle}{% |
| 15852 |
\pst@expandafter\POE@psset@@optcircangle{#1} {} {} {}\@nil |
| 15853 |
}% |
| 15854 |
\def\POE@psset@@optcircangle#1 #2 #3\@nil{% |
| 15855 |
\ifx\\#2\\% |
| 15856 |
\PackageError{pst-optexp}{optcircangle requires two numbers}% |
| 15857 |
\else\ifx\\#1\\% |
| 15858 |
\PackageError{pst-optexp}{optcircangle requires two numbers}% |
| 15859 |
\else |
| 15860 |
\psset[optexp]{optcircangleA=#1, optcircangleB=#2}% |
| 15861 |
\fi\fi |
| 15862 |
}% |
| 15863 |
\psset[optexp]{% |
| 15864 |
optcircsize=0.8, |
| 15865 |
optcircangle=-160 -20 |
| 15866 |
}% |
| 15867 |
\newpsstyle{OptCircArrow}{unit=0.7, arrows=->, arrowinset=0} |
| 15868 |
% \end{macrocode} |
| 15869 |
% |
| 15870 |
% \subsubsection{Coupler} |
| 15871 |
% \begin{macrocode} |
| 15872 |
\define@key[psset]{optexp}{couplersize}{% |
| 15873 |
\pst@expandafter\POE@psset@@couplersize{#1} {} {} {}\@nil |
| 15874 |
}% |
| 15875 |
\def\POE@psset@@couplersize#1 #2 #3\@nil{% |
| 15876 |
\ifx\\#2\\% |
| 15877 |
\pstFPmul\POE@key@couplerheight{0.8}{#1} |
| 15878 |
\pstFPmul\POE@key@couplerwidth{2}{#1} |
| 15879 |
\else |
| 15880 |
\pst@checknum{#1}\POE@key@couplerwidth |
| 15881 |
\pst@checknum{#2}\POE@key@couplerheight |
| 15882 |
\fi |
| 15883 |
}% |
| 15884 |
\define@key[psset]{optexp}{couplersep}{% |
| 15885 |
\edef\POE@key@couplersep{#1}% |
| 15886 |
} |
| 15887 |
\define@choicekey+[psset]{optexp}{couplertype}% |
| 15888 |
[\val\nr]{none,elliptic,ellipse,cross,rectangle}% |
| 15889 |
{% |
| 15890 |
\edef\POE@key@couplertype{#1} |
| 15891 |
\ifx\POE@key@couplertype\POE@str@elliptic |
| 15892 |
\let\POE@key@couplertype\POE@str@ellipse |
| 15893 |
\fi |
| 15894 |
}% |
| 15895 |
{\PackageError{pst-optexp}{Unknown value '\val' for couplertype}} |
| 15896 |
\define@choicekey+[psset]{optexp}{coupleralign}% |
| 15897 |
[\val\nr]{t,b,c,top,bottom,center}% |
| 15898 |
{% |
| 15899 |
\ifcase\nr\relax |
| 15900 |
\let\POE@key@coupleralign\POE@str@top |
| 15901 |
\or |
| 15902 |
\let\POE@key@coupleralign\POE@str@bottom |
| 15903 |
\or |
| 15904 |
\let\POE@key@coupleralign\POE@str@center |
| 15905 |
\else |
| 15906 |
\def\POE@key@coupleralign{#1}% |
| 15907 |
\fi}% |
| 15908 |
{\PackageError{pst-optexp}{Unknown value '\val' for coupleralign}} |
| 15909 |
\psset[optexp]{% |
| 15910 |
couplersize=0.2, |
| 15911 |
couplersep=0.05, |
| 15912 |
coupleralign=center, |
| 15913 |
couplertype=elliptic |
| 15914 |
}% |
| 15915 |
% \end{macrocode} |
| 15916 |
% |
| 15917 |
% \subsection{Fiber box} |
| 15918 |
% |
| 15919 |
% \begin{macrocode} |
| 15920 |
\define@key[psset]{optexp}{fiberboxheight}{% |
| 15921 |
\pst@checknum{#1}\POE@key@fiberboxheight |
| 15922 |
}% |
| 15923 |
\define@key[psset]{optexp}{fiberboxwidth}{% |
| 15924 |
\pst@checknum{#1}\POE@key@fiberboxwidth |
| 15925 |
}% |
| 15926 |
\define@key[psset]{optexp}{fiberboxsize}{% |
| 15927 |
\pst@expandafter\POE@psset@@fiberboxsize{#1} {} {} {}\@nil |
| 15928 |
}% |
| 15929 |
\def\POE@psset@@fiberboxsize#1 #2 #3\@nil{% |
| 15930 |
\psset[optexp]{fiberboxwidth=#1} |
| 15931 |
\ifx\\#2\\% |
| 15932 |
\psset[optexp]{fiberboxheight=0}% |
| 15933 |
\else |
| 15934 |
\psset[optexp]{fiberboxheight=#2}% |
| 15935 |
\fi |
| 15936 |
}% |
| 15937 |
\define@key[psset]{optexp}{fiberboxsepin}{% |
| 15938 |
\def\POE@key@fiberboxsepin{#1} |
| 15939 |
}% |
| 15940 |
\define@key[psset]{optexp}{fiberboxsepout}{% |
| 15941 |
\def\POE@key@fiberboxsepout{#1}% |
| 15942 |
}% |
| 15943 |
\define@key[psset]{optexp}{fiberboxcount}{% |
| 15944 |
\pst@expandafter\POE@psset@@fiberboxcount#1\@nil |
| 15945 |
}% |
| 15946 |
\def\POE@psset@@fiberboxcount#1x#2\@nil{% |
| 15947 |
\ifx\\#1\\% |
| 15948 |
\def\POE@key@fiberboxcountin{1}% |
| 15949 |
\else |
| 15950 |
\def\POE@key@fiberboxcountin{#1}% |
| 15951 |
\fi |
| 15952 |
\ifx\\#2\\% |
| 15953 |
\def\POE@key@fiberboxcountout{1}% |
| 15954 |
\else |
| 15955 |
\def\POE@key@fiberboxcountout{#2} |
| 15956 |
\fi |
| 15957 |
}% |
| 15958 |
\psset[optexp]{% |
| 15959 |
fiberboxsize=1, |
| 15960 |
fiberboxsepin=0.2, |
| 15961 |
fiberboxsepout=0.2, |
| 15962 |
fiberboxcount=2x2} |
| 15963 |
% \end{macrocode} |
| 15964 |
% |
| 15965 |
% \subsection{Electrical components} |
| 15966 |
% |
| 15967 |
% \subsubsection{elecmixer} |
| 15968 |
% \begin{macrocode} |
| 15969 |
\define@key[psset]{optexp}{elecmixersize}{% |
| 15970 |
\pst@checknum{#1}\POE@key@elecmixersize |
| 15971 |
}% |
| 15972 |
\psset[optexp]{elecmixersize=0.8}% |
| 15973 |
% \end{macrocode} |
| 15974 |
% |
| 15975 |
% \subsubsection{eleccoupler} |
| 15976 |
% \begin{macrocode} |
| 15977 |
\define@key[psset]{optexp}{eleccouplersize}{% |
| 15978 |
\pst@expandafter\POE@psset@@eleccouplersize{#1} {} {} {}\@nil |
| 15979 |
}% |
| 15980 |
\def\POE@psset@@eleccouplersize#1 #2 #3\@nil{% |
| 15981 |
\pst@checknum{#1}\POE@key@eleccouplerwidth |
| 15982 |
\ifx\\#2\\% |
| 15983 |
\pst@checknum{#1}\POE@key@eleccouplerheight |
| 15984 |
\else |
| 15985 |
\pst@checknum{#2}\POE@key@eleccouplerheight |
| 15986 |
\fi |
| 15987 |
}% |
| 15988 |
\define@key[psset]{optexp}{eleccouplersep}{% |
| 15989 |
\edef\POE@key@eleccouplersep{#1}% |
| 15990 |
} |
| 15991 |
\define@choicekey+[psset]{optexp}{eleccouplertype}% |
| 15992 |
[\val\nr]{standard, directional}% |
| 15993 |
{\edef\POE@key@eleccouplertype{#1}}% |
| 15994 |
{\PackageError{pst-optexp}{Unknown value '\val' for eleccouplertype}}% |
| 15995 |
\define@choicekey+[psset]{optexp}{eleccouplerinput}% |
| 15996 |
[\val\nr]{left, right}% |
| 15997 |
{\edef\POE@key@eleccouplerinput{#1}}% |
| 15998 |
{\PackageError{pst-optexp}{Unknown value '\val' for eleccouplerinput}}% |
| 15999 |
\define@choicekey+[psset]{optexp}{eleccoupleralign}% |
| 16000 |
[\val\nr]{t,b,c,top,bottom,center}% |
| 16001 |
{% |
| 16002 |
\ifcase\nr\relax |
| 16003 |
\let\POE@key@eleccoupleralign\POE@str@top |
| 16004 |
\or |
| 16005 |
\let\POE@key@eleccoupleralign\POE@str@bottom |
| 16006 |
\or |
| 16007 |
\let\POE@key@eleccoupleralign\POE@str@center |
| 16008 |
\else |
| 16009 |
\def\POE@key@eleccoupleralign{#1}% |
| 16010 |
\fi}% |
| 16011 |
{\PackageError{pst-optexp}{Unknown value '\val' for eleccoupleralign}} |
| 16012 |
\psset[optexp]{% |
| 16013 |
eleccouplersize=0.8, |
| 16014 |
eleccouplersep={}, |
| 16015 |
eleccoupleralign=center, |
| 16016 |
eleccouplertype=standard, |
| 16017 |
eleccouplerinput=left |
| 16018 |
}% |
| 16019 |
% \end{macrocode} |
| 16020 |
% |
| 16021 |
% \begin{macrocode} |
| 16022 |
\define@key[psset]{optexp}{synthsize}{% |
| 16023 |
\pst@expandafter\POE@psset@@synthsize{#1} {} {} {}\@nil |
| 16024 |
}% |
| 16025 |
\def\POE@psset@@synthsize#1 #2 #3\@nil{% |
| 16026 |
\pst@checknum{#1}\POE@key@synthwidth |
| 16027 |
\ifx\\#2\\% |
| 16028 |
\pst@checknum{#1}\POE@key@synthheight |
| 16029 |
\else |
| 16030 |
\pst@checknum{#2}\POE@key@synthheight |
| 16031 |
\fi |
| 16032 |
}% |
| 16033 |
\define@key[psset]{optexp}{synthrectwidth}{% |
| 16034 |
\pst@checknum{#1}\POE@key@synthrectwidth |
| 16035 |
}% |
| 16036 |
\define@choicekey+[psset]{optexp}{synthshape}% |
| 16037 |
[\val\nr]{circle, rectangle}% |
| 16038 |
{\edef\POE@key@synthshape{#1}}% |
| 16039 |
{\PackageError{pst-optexp}{Unknown value '\val' for synthshape}} |
| 16040 |
\define@choicekey+[psset]{optexp}{synthtype}% |
| 16041 |
[\val\nr]{sine, pulse, rectangle, triangle, sawtooth, custom}% |
| 16042 |
{\edef\POE@key@synthtype{#1}}% |
| 16043 |
{\PackageError{pst-optexp}{Unknown value '\val' for synthtype}} |
| 16044 |
\newpsstyle{SynthStyle}{} |
| 16045 |
\psset[optexp]{% |
| 16046 |
synthsize=0.8, |
| 16047 |
synthshape=circle, |
| 16048 |
synthtype=sine, |
| 16049 |
synthrectwidth=0.2 |
| 16050 |
}% |
| 16051 |
% \end{macrocode} |
| 16052 |
% |
| 16053 |
% \subsection{Beam-connection parameters} |
| 16054 |
% The keys related to the \cs{draw*} macros. |
| 16055 |
% |
| 16056 |
% Connect a component directly with its reference nodes using \cs{drawbeam}. |
| 16057 |
% \begin{macrocode} |
| 16058 |
\define@boolkey[psset]{optexp}[POE@]{beam}[true]{} |
| 16059 |
% \end{macrocode} |
| 16060 |
% \begin{macrocode} |
| 16061 |
\define@key[psset]{optexp}{refractiveindex}{% |
| 16062 |
\psset[optexp]{n=#1}% |
| 16063 |
\PackageWarning{pst-optexp}{% |
| 16064 |
Option 'refractiveindex' is deprecated,\MessageBreak |
| 16065 |
use 'n' instead.}% |
| 16066 |
}% |
| 16067 |
\define@key[psset]{optexp}{n}{% |
| 16068 |
\POE@parsealg{n}#1\@nil |
| 16069 |
} |
| 16070 |
\def\POE@parsealg#1#2#3\@nil{% |
| 16071 |
\ifx#2*\relax |
| 16072 |
\POE@@parsealg#3\@nil |
| 16073 |
\expandafter\let\csname POE@key@#1\endcsname\POE@tempA |
| 16074 |
\else |
| 16075 |
\@namedef{POE@key@#1}{[#2#3] }% |
| 16076 |
\fi |
| 16077 |
} |
| 16078 |
\def\POE@@parsealg#1#2\@nil{% |
| 16079 |
\edef\POE@tempA{tx@Dict begin (#1#2) AlgParser end }% |
| 16080 |
} |
| 16081 |
\define@key[psset]{optexp}{beamangle}{% |
| 16082 |
\edef\POE@key@beamangle{#1}% |
| 16083 |
}% |
| 16084 |
\define@key[psset]{optexp}{beampos}{% |
| 16085 |
\edef\POE@key@beampos{#1}% |
| 16086 |
}% |
| 16087 |
\define@key[psset]{optexp}{beamdiv}{% |
| 16088 |
\edef\POE@key@beamdiv{#1}% |
| 16089 |
}% |
| 16090 |
\define@key[psset]{optexp}{beamwidth}{% |
| 16091 |
\edef\POE@key@beamwidth{#1}% |
| 16092 |
}% |
| 16093 |
\define@choicekey+[psset]{optexp}{beammode}% |
| 16094 |
[\val\nr]{trans,refl,reflective,transmittive,auto}% |
| 16095 |
{\ifcase\nr\relax |
| 16096 |
\let\POE@key@beammode\POE@str@transmittive |
| 16097 |
\or |
| 16098 |
\let\POE@key@beammode\POE@str@reflective |
| 16099 |
\else |
| 16100 |
\def\POE@key@beammode{#1}% |
| 16101 |
\fi}% |
| 16102 |
{\PackageError{pst-optexp}{Unknown value '\val' for beammode}} |
| 16103 |
|
| 16104 |
\define@boolkey[psset]{optexp}[POE@]{startinside}[true]{}% |
| 16105 |
\define@boolkey[psset]{optexp}[POE@]{stopinside}[true]{}% |
| 16106 |
\define@key[psset]{optexp}{startinsidecount}{% |
| 16107 |
\pst@checknum{#1}\POE@key@startinsidecount |
| 16108 |
} |
| 16109 |
\define@key[psset]{optexp}{stopinsidecount}{% |
| 16110 |
\pst@checknum{#1}\POE@key@stopinsidecount |
| 16111 |
} |
| 16112 |
\define@boolkey[psset]{optexp}[POE@]{beaminsidefirst}[true]{}% |
| 16113 |
\define@boolkey[psset]{optexp}[POE@]{beaminsidelast}[true]{}% |
| 16114 |
\define@choicekey+[psset]{optexp}{savebeampoints}% |
| 16115 |
[\val\nr]{true,false}[true]{% |
| 16116 |
\ifcase\nr\relax |
| 16117 |
\def\POE@key@savebeampoints{1}% |
| 16118 |
\or |
| 16119 |
\def\POE@key@savebeampoints{0}% |
| 16120 |
\fi |
| 16121 |
}{% |
| 16122 |
\ifnum9<1#1 |
| 16123 |
\def\POE@key@savebeampoints{#1}% |
| 16124 |
\else |
| 16125 |
\PackageError{pst-optexp}% |
| 16126 |
{savebeampoints must be a positive integer or 0}% |
| 16127 |
\fi |
| 16128 |
\@expandtwoargs\in@{,\POE@key@savebeampoints,}{,\POE@beamlist,}% |
| 16129 |
\ifin@\else |
| 16130 |
\xdef\POE@beamlist{% |
| 16131 |
\POE@key@savebeampoints |
| 16132 |
\ifx\POE@beamlist\@empty\else,\fi\POE@beamlist |
| 16133 |
}% |
| 16134 |
\fi |
| 16135 |
}% |
| 16136 |
\define@choicekey+[psset]{optexp}{loadbeampoints}% |
| 16137 |
[\val\nr]{true,false}[true]{% |
| 16138 |
\ifcase\nr\relax |
| 16139 |
\def\POE@key@loadbeampoints{1}% |
| 16140 |
\or |
| 16141 |
\def\POE@key@loadbeampoints{0}% |
| 16142 |
\fi |
| 16143 |
}{% |
| 16144 |
\ifnum9<1#1 |
| 16145 |
\def\POE@key@loadbeampoints{#1}% |
| 16146 |
\else |
| 16147 |
\PackageError{pst-optexp}% |
| 16148 |
{loadbeampoints must be a positive integer or 0}% |
| 16149 |
\fi |
| 16150 |
\@expandtwoargs\in@{,\POE@key@loadbeampoints,}{,\POE@beamlist,}% |
| 16151 |
\ifin@\else |
| 16152 |
\xdef\POE@beamlist{% |
| 16153 |
\POE@key@loadbeampoints |
| 16154 |
\ifx\POE@beamlist\@empty\else,\fi\POE@beamlist |
| 16155 |
}% |
| 16156 |
\fi |
| 16157 |
}% |
| 16158 |
\define@key[psset]{optexp}{loadbeam}[true]{% |
| 16159 |
\setkeys[psset]{optexp}{loadbeampoints=#1}% |
| 16160 |
\ifdim\POE@key@loadbeampoints pt>0pt |
| 16161 |
\POE@loadbeamtrue |
| 16162 |
\else |
| 16163 |
\POE@loadbeamfalse |
| 16164 |
\fi |
| 16165 |
}% |
| 16166 |
\define@key[psset]{optexp}{savebeam}[true]{% |
| 16167 |
\setkeys[psset]{optexp}{savebeampoints=#1}% |
| 16168 |
\ifdim\POE@key@savebeampoints pt>0pt |
| 16169 |
\POE@savebeamtrue |
| 16170 |
\else |
| 16171 |
\POE@savebeamfalse |
| 16172 |
\fi |
| 16173 |
}% |
| 16174 |
\define@boolkey[psset]{optexp}[POE@]{beaminside}[true]{}% |
| 16175 |
\define@boolkey[psset]{optexp}[POE@]{allowbeaminside}[true]{}% |
| 16176 |
\define@boolkey[psset]{optexp}[POE@]{forcebeaminside}[true]{}% |
| 16177 |
\define@boolkey[psset]{optexp}[POE@]{raytrace}[true]{}% |
| 16178 |
\define@boolkey[psset]{optexp}[POE@]{useNA}[true]{}% |
| 16179 |
\define@choicekey+[psset]{optexp}{beamnodealign}% |
| 16180 |
[\val\nr]{vec, conn, vector, connection}% |
| 16181 |
{% |
| 16182 |
\ifcase\nr\relax |
| 16183 |
\let\POE@key@beamnodealign\POE@str@vector |
| 16184 |
\or |
| 16185 |
\let\POE@key@beamnodealign\POE@str@connection |
| 16186 |
\else |
| 16187 |
\def\POE@key@beamnodealign{#1}% |
| 16188 |
\fi |
| 16189 |
}% |
| 16190 |
{\PackageError{pst-optexp}{Unknown value '\val' for beamnodealign}} |
| 16191 |
\define@key[psset]{optexp}{beampathskip}{% |
| 16192 |
\pst@checknum{#1}\POE@key@beampathskip |
| 16193 |
}% |
| 16194 |
\define@key[psset]{optexp}{beampathcount}{% |
| 16195 |
\pst@getint{#1}\POE@key@beampathcount |
| 16196 |
}% |
| 16197 |
\define@choicekey+[psset]{optexp}{beamalign}% |
| 16198 |
[\val\nr]{rel,abs,relative,absolute,firstcomp}% |
| 16199 |
{% |
| 16200 |
\ifcase\nr\relax |
| 16201 |
\let\POE@key@beamalign\POE@str@relative |
| 16202 |
\or |
| 16203 |
\let\POE@key@beamalign\POE@str@absolute |
| 16204 |
\else |
| 16205 |
\def\POE@key@beamalign{#1}% |
| 16206 |
\fi |
| 16207 |
}% |
| 16208 |
{\PackageError{pst-optexp}{Unknown value '\val' for beamalign}} |
| 16209 |
\define@key[psset]{optexp}{ArrowInsideMinLength}{% |
| 16210 |
\def\POE@key@ArrowInsideMinLength{#1}% |
| 16211 |
}% |
| 16212 |
\define@key[psset]{optexp}{ArrowInsideMaxLength}{% |
| 16213 |
\def\POE@key@ArrowInsideMaxLength{#1}% |
| 16214 |
}% |
| 16215 |
\define@choicekey[psset]{optexp}{fadeto}[\val\nr]{white,black,transparency}{% |
| 16216 |
\def\POE@key@fadeto{#1}% |
| 16217 |
}% |
| 16218 |
\define@key[psset]{optexp}{fadefunc}{% |
| 16219 |
\def\POE@key@fadefunc{#1}% |
| 16220 |
}% |
| 16221 |
\define@key[psset]{optexp}{fadefuncname}{% |
| 16222 |
\def\POE@key@fadefuncname{#1}% |
| 16223 |
}% |
| 16224 |
\define@key[psset]{optexp}{fadepoints}{% |
| 16225 |
\def\POE@key@fadepoints{#1}% |
| 16226 |
}% |
| 16227 |
\def\psls@fade{% |
| 16228 |
\pst@optexpdict |
| 16229 |
\ifx\POE@key@fadefunc\@empty\else |
| 16230 |
/fadefunc@custom {\POE@key@fadefunc} def |
| 16231 |
\fi |
| 16232 |
/fadecorrect \ifx\POE@key@fadeto\POE@str@transparency 0 \else 0.1 \fi def |
| 16233 |
\pst@usecolor\pslinecolor |
| 16234 |
\POE@key@fadepoints\space |
| 16235 |
\psk@strokeopacityalpha |
| 16236 |
currentdict /fadeto@\POE@key@fadeto\space dup 3 1 roll known not { pop /fadeto@white } if load |
| 16237 |
currentdict /fadefunc@\POE@key@fadefuncname\space dup 3 1 roll known not { pop /fadefunc@linear } if load |
| 16238 |
FadeStroke |
| 16239 |
end |
| 16240 |
}% |
| 16241 |
\psset[optexp]{% |
| 16242 |
raytrace=true |
| 16243 |
,useNA=true |
| 16244 |
,beamnodealign=connection |
| 16245 |
,startinside=false |
| 16246 |
,stopinside=false |
| 16247 |
,allowbeaminside=true |
| 16248 |
,forcebeaminside=false |
| 16249 |
,beaminside=true |
| 16250 |
,beaminsidefirst=false |
| 16251 |
,beaminsidelast=false |
| 16252 |
,loadbeam=false |
| 16253 |
,savebeam=true |
| 16254 |
,loadbeampoints=false |
| 16255 |
,savebeampoints=true |
| 16256 |
,beamangle=0 |
| 16257 |
,beampos=\@empty |
| 16258 |
,beamalign=relative |
| 16259 |
,beamwidth=0 |
| 16260 |
,beamdiv=0 |
| 16261 |
,beammode=auto |
| 16262 |
,n=1.5 |
| 16263 |
,beampathskip=0 |
| 16264 |
,beampathcount=-1 |
| 16265 |
,stopinsidecount=-1 |
| 16266 |
,startinsidecount=-1 |
| 16267 |
,ArrowInsideMinLength=0.2 |
| 16268 |
,ArrowInsideMaxLength=-1 |
| 16269 |
,fadepoints=200 |
| 16270 |
,fadeto=white |
| 16271 |
,fadefunc=\@empty |
| 16272 |
,fadefuncname=linear |
| 16273 |
}% |
| 16274 |
% \end{macrocode} |
| 16275 |
% |
| 16276 |
% \subsection{Fiber-connection parameters} |
| 16277 |
% Select which fibers are drawn automatically. |
| 16278 |
% \begin{macrocode} |
| 16279 |
\define@key[psset]{optexp}{fiber}[all]{% |
| 16280 |
\POE@psset@fibercheck#1\@nil |
| 16281 |
} |
| 16282 |
% \end{macrocode} |
| 16283 |
% Check which components are affected by the fiber parameter. * is only for |
| 16284 |
% fiber-optical components, + refers to all components but the fiber-optical |
| 16285 |
% ones, otherwise all components are affected. |
| 16286 |
% \begin{macrocode} |
| 16287 |
\def\POE@psset@fibercheck#1#2\@nil{% |
| 16288 |
\ifx#1*\relax |
| 16289 |
\ifx\\#2\\% |
| 16290 |
\setkeys[psset]{optexp}{fiber@preset=all}% |
| 16291 |
\else |
| 16292 |
\setkeys[psset]{optexp}{fiber@preset=#2}% |
| 16293 |
\fi |
| 16294 |
\else\ifx#1+\relax |
| 16295 |
\ifx\\#2\\% |
| 16296 |
\setkeys[psset]{optexp}{fiber@all=all}% |
| 16297 |
\else |
| 16298 |
\setkeys[psset]{optexp}{fiber@all=#2}% |
| 16299 |
\fi |
| 16300 |
\POE@unset@wire |
| 16301 |
\else |
| 16302 |
\setkeys[psset]{optexp}{fiber@all=#1#2}% |
| 16303 |
\setkeys[psset]{optexp}{fiber@preset=#1#2}% |
| 16304 |
\POE@unset@wire |
| 16305 |
\fi\fi |
| 16306 |
}% |
| 16307 |
\def\POE@unset@wire{% |
| 16308 |
\ifPOE@fiberin@ |
| 16309 |
\setkeys[psset]{optexp}{wirepresetin@=false}% |
| 16310 |
\fi |
| 16311 |
\ifPOE@fiberout@ |
| 16312 |
\setkeys[psset]{optexp}{wirepresetout@=false}% |
| 16313 |
\fi |
| 16314 |
\ifPOE@fiberin@top |
| 16315 |
\setkeys[psset]{optexp}{wirepresetin@top=false}% |
| 16316 |
\fi |
| 16317 |
\ifPOE@fiberin@bottom |
| 16318 |
\setkeys[psset]{optexp}{wirepresetin@bottom=false}% |
| 16319 |
\fi |
| 16320 |
\ifPOE@fiberout@top |
| 16321 |
\setkeys[psset]{optexp}{wirepresetout@top=false}% |
| 16322 |
\fi |
| 16323 |
\ifPOE@fiberout@bottom |
| 16324 |
\setkeys[psset]{optexp}{wirepresetout@bottom=false}% |
| 16325 |
\fi |
| 16326 |
}% |
| 16327 |
% \end{macrocode} |
| 16328 |
% Set the fiber parameters for fiber-optical components only (use fiber=*...). |
| 16329 |
% \begin{macrocode} |
| 16330 |
\define@choicekey*+[psset]{optexp}{fiber@preset}% |
| 16331 |
[\val\nr]{false,none,true,all}[all]{% |
| 16332 |
\ifcase\nr\relax |
| 16333 |
\POE@getfiberpreset@none |
| 16334 |
\or |
| 16335 |
\POE@getfiberpreset@none |
| 16336 |
\or |
| 16337 |
\POE@getfiberpreset@all |
| 16338 |
\or |
| 16339 |
\POE@getfiberpreset@all |
| 16340 |
\fi |
| 16341 |
}{% |
| 16342 |
\ifx\@empty\val |
| 16343 |
\POE@getfiberpreset@none |
| 16344 |
\else |
| 16345 |
\pst@expandafter\POE@psset@@fiberpreset{#1}\@empty,,\@nil |
| 16346 |
\fi |
| 16347 |
}% |
| 16348 |
\def\POE@psset@@fiberpreset#1#2,#3,#4\@nil{% |
| 16349 |
\POE@getfiberpreset@all |
| 16350 |
\ifx\\#3\\% |
| 16351 |
\@nameuse{POE@getfiberpreset@#1}% |
| 16352 |
\@nameuse{POE@getfiberpreset@#2}% |
| 16353 |
\fi |
| 16354 |
}% |
| 16355 |
\def\POE@getfiberpreset@none{% |
| 16356 |
\setkeys[psset]{optexp}{% |
| 16357 |
fiberpresetin@=false, fiberpresetout@=false, |
| 16358 |
fiberpresetin@top=false, fiberpresetin@bottom=false, |
| 16359 |
fiberpresetout@top=false, fiberpresetout@bottom=false}% |
| 16360 |
}% |
| 16361 |
\def\POE@getfiberpreset@all{% |
| 16362 |
\setkeys[psset]{optexp}{% |
| 16363 |
fiberpresetin@, fiberpresetout@, |
| 16364 |
fiberpresetin@top, fiberpresetin@bottom, |
| 16365 |
fiberpresetout@top, fiberpresetout@bottom}% |
| 16366 |
}% |
| 16367 |
\def\POE@getfiberpreset@t{% |
| 16368 |
\setkeys[psset]{optexp}{% |
| 16369 |
fiberpresetin@bottom=false, fiberpresetout@bottom=false}% |
| 16370 |
}% |
| 16371 |
\def\POE@getfiberpreset@b{% |
| 16372 |
\setkeys[psset]{optexp}{% |
| 16373 |
fiberpresetin@top=false, fiberpresetout@top=false}% |
| 16374 |
}% |
| 16375 |
\def\POE@getfiberpreset@l{% |
| 16376 |
\setkeys[psset]{optexp}{% |
| 16377 |
fiberpresetout@=false, |
| 16378 |
fiberpresetout@top=false, |
| 16379 |
fiberpresetout@bottom=false}% |
| 16380 |
}% |
| 16381 |
\def\POE@getfiberpreset@r{% |
| 16382 |
\setkeys[psset]{optexp}{% |
| 16383 |
fiberpresetin@=false, |
| 16384 |
fiberpresetin@top=false, |
| 16385 |
fiberpresetin@bottom=false}% |
| 16386 |
}% |
| 16387 |
\let\POE@getfiberpreset@i\POE@getfiberpreset@l |
| 16388 |
\let\POE@getfiberpreset@o\POE@getfiberpreset@r |
| 16389 |
% \end{macrocode} |
| 16390 |
% |
| 16391 |
% This code is for all components, fiber-optical and free-ray. |
| 16392 |
% \begin{macrocode} |
| 16393 |
\define@choicekey*+[psset]{optexp}{fiber@all}% |
| 16394 |
[\val\nr]{false,none,true,all}[all]{% |
| 16395 |
\ifcase\nr\relax |
| 16396 |
\POE@getfiber@none |
| 16397 |
\or |
| 16398 |
\POE@getfiber@none |
| 16399 |
\or |
| 16400 |
\POE@getfiber@all |
| 16401 |
\or |
| 16402 |
\POE@getfiber@all |
| 16403 |
\fi |
| 16404 |
}{% |
| 16405 |
\ifx\@empty\val |
| 16406 |
\POE@getfiber@none |
| 16407 |
\else |
| 16408 |
\pst@expandafter\POE@psset@@fiber{#1}\@empty,,\@nil |
| 16409 |
\fi |
| 16410 |
}% |
| 16411 |
\def\POE@psset@@fiber#1#2,#3,#4\@nil{% |
| 16412 |
\POE@getfiber@all |
| 16413 |
\ifx\@empty#3\@empty |
| 16414 |
\@nameuse{POE@getfiber@#1}% |
| 16415 |
\@nameuse{POE@getfiber@#2}% |
| 16416 |
\fi |
| 16417 |
}% |
| 16418 |
\def\POE@getfiber@none{% |
| 16419 |
\setkeys[psset]{optexp}{% |
| 16420 |
fiberin@=false, fiberout@=false, |
| 16421 |
fiberin@top=false, fiberin@bottom=false, |
| 16422 |
fiberout@top=false, fiberout@bottom=false}% |
| 16423 |
}% |
| 16424 |
\def\POE@getfiber@all{% |
| 16425 |
\setkeys[psset]{optexp}{% |
| 16426 |
fiberin@, fiberout@, |
| 16427 |
fiberin@top, fiberin@bottom, |
| 16428 |
fiberout@top, fiberout@bottom}% |
| 16429 |
}% |
| 16430 |
\def\POE@getfiber@t{% |
| 16431 |
\setkeys[psset]{optexp}{% |
| 16432 |
fiberin@bottom=false, fiberout@bottom=false}% |
| 16433 |
}% |
| 16434 |
\def\POE@getfiber@b{% |
| 16435 |
\setkeys[psset]{optexp}{% |
| 16436 |
fiberin@top=false, fiberout@top=false}% |
| 16437 |
}% |
| 16438 |
\def\POE@getfiber@l{% |
| 16439 |
\setkeys[psset]{optexp}{% |
| 16440 |
fiberout@=false, fiberout@top=false, fiberout@bottom=false}% |
| 16441 |
}% |
| 16442 |
\def\POE@getfiber@r{% |
| 16443 |
\setkeys[psset]{optexp}{% |
| 16444 |
fiberin@=false, fiberin@top=false, fiberin@bottom=false}% |
| 16445 |
}% |
| 16446 |
\let\POE@getfiber@i\POE@getfiber@l |
| 16447 |
\let\POE@getfiber@o\POE@getfiber@r |
| 16448 |
% \end{macrocode} |
| 16449 |
% These are the internal boolkeys for the fiber choices done with \opt{fiberin}, |
| 16450 |
% \opt{fiberout} and \opt{fiber}. Do not use them directly. |
| 16451 |
% \begin{macrocode} |
| 16452 |
\define@boolkey[psset]{optexp}[POE@]{fiberin@}[true]{} |
| 16453 |
\define@boolkey[psset]{optexp}[POE@]{fiberin@top}[true]{} |
| 16454 |
\define@boolkey[psset]{optexp}[POE@]{fiberin@bottom}[true]{} |
| 16455 |
\define@boolkey[psset]{optexp}[POE@]{fiberout@}[true]{} |
| 16456 |
\define@boolkey[psset]{optexp}[POE@]{fiberout@top}[true]{} |
| 16457 |
\define@boolkey[psset]{optexp}[POE@]{fiberout@bottom}[true]{} |
| 16458 |
\define@boolkey[psset]{optexp}[POE@]{fiberpresetin@}[true]{} |
| 16459 |
\define@boolkey[psset]{optexp}[POE@]{fiberpresetin@top}[true]{} |
| 16460 |
\define@boolkey[psset]{optexp}[POE@]{fiberpresetin@bottom}[true]{} |
| 16461 |
\define@boolkey[psset]{optexp}[POE@]{fiberpresetout@}[true]{} |
| 16462 |
\define@boolkey[psset]{optexp}[POE@]{fiberpresetout@top}[true]{} |
| 16463 |
\define@boolkey[psset]{optexp}[POE@]{fiberpresetout@bottom}[true]{} |
| 16464 |
\psset[optexp]{fiber=*all}% |
| 16465 |
\define@key[psset]{optexp}{fiberangleA}{% |
| 16466 |
\pst@checknum{#1}\POE@key@fiberangleA |
| 16467 |
}% |
| 16468 |
\define@key[psset]{optexp}{fiberangleB}{% |
| 16469 |
\pst@checknum{#1}\POE@key@fiberangleB |
| 16470 |
}% |
| 16471 |
\define@choicekey+[psset]{optexp}{fiberalign}% |
| 16472 |
[\val\nr]{rel,abs,relative,center,absolute}% |
| 16473 |
{% |
| 16474 |
\ifcase\nr\relax |
| 16475 |
\let\POE@key@fiberalign\POE@str@relative |
| 16476 |
\or |
| 16477 |
\let\POE@key@fiberalign\POE@str@absolute |
| 16478 |
\else |
| 16479 |
\def\POE@key@fiberalign{#1}% |
| 16480 |
\fi |
| 16481 |
}% |
| 16482 |
{\PackageError{pst-optexp}{Unknown value '\val' for fiberalign}}% |
| 16483 |
\define@key[psset]{optexp}{fiberstyle}{% |
| 16484 |
\@ifundefined{nc#1}% |
| 16485 |
{\PackageError{pst-optexp}{Unknown value '#1' for fiberstyle}}% |
| 16486 |
{\def\POE@key@fiberstyle{#1}}} |
| 16487 |
\psset[optexp]{% |
| 16488 |
fiberangleA=0, |
| 16489 |
fiberangleB=0, |
| 16490 |
fiberalign=relative, |
| 16491 |
fiberstyle=curve |
| 16492 |
}% |
| 16493 |
|
| 16494 |
% \subsection{Wire connection parameters} |
| 16495 |
% Select which wires are drawn automatically. |
| 16496 |
% Note, this part is equivalent to the fiber connection parameters, only 'fiber' is replace by 'wire'. |
| 16497 |
% \begin{macrocode} |
| 16498 |
\define@key[psset]{optexp}{wire}[all]{% |
| 16499 |
\POE@psset@wirecheck#1\@nil |
| 16500 |
} |
| 16501 |
% \end{macrocode} |
| 16502 |
% Check which components are affected by the wire parameter: |
| 16503 |
% * is only for electrical components |
| 16504 |
% + refers to all components but the electrical ones, |
| 16505 |
% otherwise all components are affected. |
| 16506 |
% \begin{macrocode} |
| 16507 |
\def\POE@psset@wirecheck#1#2\@nil{% |
| 16508 |
\ifx#1*\relax |
| 16509 |
\ifx\\#2\\% |
| 16510 |
\setkeys[psset]{optexp}{wire@preset=all}% |
| 16511 |
\else |
| 16512 |
\setkeys[psset]{optexp}{wire@preset=#2}% |
| 16513 |
\fi |
| 16514 |
\else\ifx#1+\relax |
| 16515 |
\ifx\\#2\\% |
| 16516 |
\setkeys[psset]{optexp}{wire@all=all}% |
| 16517 |
\else |
| 16518 |
\setkeys[psset]{optexp}{wire@all=#2}% |
| 16519 |
\fi |
| 16520 |
\POE@unset@fiber |
| 16521 |
\else |
| 16522 |
\setkeys[psset]{optexp}{wire@all=#1#2, wire@preset=#1#2}% |
| 16523 |
\POE@unset@fiber |
| 16524 |
\fi\fi |
| 16525 |
}% |
| 16526 |
\def\POE@unset@fiber{% |
| 16527 |
\ifPOE@wirein@ |
| 16528 |
\setkeys[psset]{optexp}{fiberpresetin@=false, fiberin@=false}% |
| 16529 |
\fi |
| 16530 |
\ifPOE@wireout@ |
| 16531 |
\setkeys[psset]{optexp}{fiberpresetout@=false, fiberout@=false}% |
| 16532 |
\fi |
| 16533 |
\ifPOE@wirein@top |
| 16534 |
\setkeys[psset]{optexp}{fiberpresetin@top=false, fiberin@top=false}% |
| 16535 |
\fi |
| 16536 |
\ifPOE@wirein@bottom |
| 16537 |
\setkeys[psset]{optexp}{fiberpresetin@bottom=false, fiberin@bottom=false}% |
| 16538 |
\fi |
| 16539 |
\ifPOE@wireout@top |
| 16540 |
\setkeys[psset]{optexp}{fiberpresetout@top=false, fiberout@top=false}% |
| 16541 |
\fi |
| 16542 |
\ifPOE@wireout@bottom |
| 16543 |
\setkeys[psset]{optexp}{fiberpresetout@bottom=false, fiberout@bottom=false}% |
| 16544 |
\fi |
| 16545 |
}% |
| 16546 |
% \end{macrocode} |
| 16547 |
% Set the fiber parameters for fiber-optical components only (use fiber=*...). |
| 16548 |
% \begin{macrocode} |
| 16549 |
\define@choicekey*+[psset]{optexp}{wire@preset}% |
| 16550 |
[\val\nr]{false,none,true,all}[all]{% |
| 16551 |
\ifcase\nr\relax |
| 16552 |
\POE@getwirepreset@none |
| 16553 |
\or |
| 16554 |
\POE@getwirepreset@none |
| 16555 |
\or |
| 16556 |
\POE@getwirepreset@all |
| 16557 |
\or |
| 16558 |
\POE@getwirepreset@all |
| 16559 |
\fi |
| 16560 |
}{% |
| 16561 |
\ifx\@empty\val |
| 16562 |
\POE@getwirepreset@none |
| 16563 |
\else |
| 16564 |
\pst@expandafter\POE@psset@@wirepreset{#1}\@empty,,\@nil |
| 16565 |
\fi |
| 16566 |
}% |
| 16567 |
\def\POE@psset@@wirepreset#1#2,#3,#4\@nil{% |
| 16568 |
\POE@getwirepreset@all |
| 16569 |
\ifx\\#3\\% |
| 16570 |
\@nameuse{POE@getwirepreset@#1}% |
| 16571 |
\@nameuse{POE@getwirepreset@#2}% |
| 16572 |
\fi |
| 16573 |
}% |
| 16574 |
\def\POE@getwirepreset@none{% |
| 16575 |
\setkeys[psset]{optexp}{% |
| 16576 |
wirepresetin@=false, wirepresetout@=false, |
| 16577 |
wirepresetin@top=false, wirepresetin@bottom=false, |
| 16578 |
wirepresetout@top=false, wirepresetout@bottom=false}% |
| 16579 |
}% |
| 16580 |
|
| 16581 |
\def\POE@getwirepreset@all{% |
| 16582 |
\setkeys[psset]{optexp}{% |
| 16583 |
wirepresetin@, wirepresetout@, |
| 16584 |
wirepresetin@top, wirepresetin@bottom, |
| 16585 |
wirepresetout@top, wirepresetout@bottom}% |
| 16586 |
}% |
| 16587 |
\def\POE@getwirepreset@t{% |
| 16588 |
\setkeys[psset]{optexp}{% |
| 16589 |
wirepresetin@bottom=false, wirepresetout@bottom=false}% |
| 16590 |
}% |
| 16591 |
\def\POE@getwirepreset@b{% |
| 16592 |
\setkeys[psset]{optexp}{% |
| 16593 |
wirepresetin@top=false, wirepresetout@top=false}% |
| 16594 |
}% |
| 16595 |
\def\POE@getwirepreset@l{% |
| 16596 |
\setkeys[psset]{optexp}{% |
| 16597 |
wirepresetout@=false, |
| 16598 |
wirepresetout@top=false, |
| 16599 |
wirepresetout@bottom=false}% |
| 16600 |
}% |
| 16601 |
\def\POE@getwirepreset@r{% |
| 16602 |
\setkeys[psset]{optexp}{% |
| 16603 |
wirepresetin@=false, |
| 16604 |
wirepresetin@top=false, |
| 16605 |
wirepresetin@bottom=false}% |
| 16606 |
}% |
| 16607 |
\let\POE@getwirepreset@i\POE@getwirepreset@l |
| 16608 |
\let\POE@getwirepreset@o\POE@getwirepreset@r |
| 16609 |
% \end{macrocode} |
| 16610 |
% |
| 16611 |
% This code is for all components, fiber-optical and free-ray. |
| 16612 |
% \begin{macrocode} |
| 16613 |
\define@choicekey*+[psset]{optexp}{wire@all}% |
| 16614 |
[\val\nr]{false,none,true,all}[all]{% |
| 16615 |
\ifcase\nr\relax |
| 16616 |
\POE@getwire@none |
| 16617 |
\or |
| 16618 |
\POE@getwire@none |
| 16619 |
\or |
| 16620 |
\POE@getwire@all |
| 16621 |
\or |
| 16622 |
\POE@getwire@all |
| 16623 |
\fi |
| 16624 |
}{% |
| 16625 |
\ifx\@empty\val |
| 16626 |
\POE@getwire@none |
| 16627 |
\else |
| 16628 |
\pst@expandafter\POE@psset@@wire{#1}\@empty,,\@nil |
| 16629 |
\fi |
| 16630 |
}% |
| 16631 |
\def\POE@psset@@wire#1#2,#3,#4\@nil{% |
| 16632 |
\POE@getwire@all |
| 16633 |
\ifx\@empty#3\@empty |
| 16634 |
\@nameuse{POE@getwire@#1}% |
| 16635 |
\@nameuse{POE@getwire@#2}% |
| 16636 |
\fi |
| 16637 |
}% |
| 16638 |
\def\POE@getwire@none{% |
| 16639 |
\setkeys[psset]{optexp}{% |
| 16640 |
wirein@=false, wireout@=false, |
| 16641 |
wirein@top=false, wirein@bottom=false, |
| 16642 |
wireout@top=false, wireout@bottom=false}% |
| 16643 |
}% |
| 16644 |
\def\POE@getwire@all{% |
| 16645 |
\setkeys[psset]{optexp}{% |
| 16646 |
wirein@, wireout@, |
| 16647 |
wirein@top, wirein@bottom, |
| 16648 |
wireout@top, wireout@bottom}% |
| 16649 |
}% |
| 16650 |
\def\POE@getwire@t{% |
| 16651 |
\setkeys[psset]{optexp}{% |
| 16652 |
wirein@bottom=false, wireout@bottom=false}% |
| 16653 |
}% |
| 16654 |
\def\POE@getwire@b{% |
| 16655 |
\setkeys[psset]{optexp}{% |
| 16656 |
wirein@top=false, wireout@top=false}% |
| 16657 |
}% |
| 16658 |
\def\POE@getwire@l{% |
| 16659 |
\setkeys[psset]{optexp}{% |
| 16660 |
wireout@=false, wireout@top=false, wireout@bottom=false}% |
| 16661 |
}% |
| 16662 |
\def\POE@getwire@r{% |
| 16663 |
\setkeys[psset]{optexp}{% |
| 16664 |
wirein@=false, wirein@top=false, wirein@bottom=false}% |
| 16665 |
}% |
| 16666 |
\let\POE@getwire@i\POE@getwire@l |
| 16667 |
\let\POE@getwire@o\POE@getwire@r |
| 16668 |
% \end{macrocode} |
| 16669 |
% These are the internal boolkeys for the wire choices done with \opt{wirein}, |
| 16670 |
% \opt{wireout} and \opt{wire}. Do not use them directly. |
| 16671 |
% \begin{macrocode} |
| 16672 |
\define@boolkey[psset]{optexp}[POE@]{wirein@}[true]{} |
| 16673 |
\define@boolkey[psset]{optexp}[POE@]{wirein@top}[true]{} |
| 16674 |
\define@boolkey[psset]{optexp}[POE@]{wirein@bottom}[true]{} |
| 16675 |
\define@boolkey[psset]{optexp}[POE@]{wireout@}[true]{} |
| 16676 |
\define@boolkey[psset]{optexp}[POE@]{wireout@top}[true]{} |
| 16677 |
\define@boolkey[psset]{optexp}[POE@]{wireout@bottom}[true]{} |
| 16678 |
\define@boolkey[psset]{optexp}[POE@]{wirepresetin@}[true]{} |
| 16679 |
\define@boolkey[psset]{optexp}[POE@]{wirepresetin@top}[true]{} |
| 16680 |
\define@boolkey[psset]{optexp}[POE@]{wirepresetin@bottom}[true]{} |
| 16681 |
\define@boolkey[psset]{optexp}[POE@]{wirepresetout@}[true]{} |
| 16682 |
\define@boolkey[psset]{optexp}[POE@]{wirepresetout@top}[true]{} |
| 16683 |
\define@boolkey[psset]{optexp}[POE@]{wirepresetout@bottom}[true]{} |
| 16684 |
\psset[optexp]{wire=*all}% |
| 16685 |
\define@key[psset]{optexp}{wireangleA}{% |
| 16686 |
\pst@checknum{#1}\POE@key@wireangleA |
| 16687 |
}% |
| 16688 |
\define@key[psset]{optexp}{wireangleB}{% |
| 16689 |
\pst@checknum{#1}\POE@key@wireangleB |
| 16690 |
}% |
| 16691 |
\define@choicekey+[psset]{optexp}{wirealign}% |
| 16692 |
[\val\nr]{rel,abs,relative,center,absolute}% |
| 16693 |
{% |
| 16694 |
\ifcase\nr\relax |
| 16695 |
\let\POE@key@wirealign\POE@str@relative |
| 16696 |
\or |
| 16697 |
\let\POE@key@wirealign\POE@str@absolute |
| 16698 |
\else |
| 16699 |
\def\POE@key@wirealign{#1}% |
| 16700 |
\fi |
| 16701 |
}% |
| 16702 |
{\PackageError{pst-optexp}{Unknown value '\val' for wirealign}}% |
| 16703 |
\define@key[psset]{optexp}{wirestyle}{% |
| 16704 |
\@ifundefined{nc#1}% |
| 16705 |
{\PackageError{pst-optexp}{Unknown value '#1' for wirestyle}}% |
| 16706 |
{\def\POE@key@wirestyle{#1}}} |
| 16707 |
\psset[optexp]{% |
| 16708 |
wireangleA=0, |
| 16709 |
wireangleB=0, |
| 16710 |
wirealign=relative, |
| 16711 |
wirestyle=angle |
| 16712 |
}% |
| 16713 |
% \end{macrocode} |
| 16714 |
% Which nodes to take for the automatic fiber and wire connections. |
| 16715 |
% \begin{macrocode} |
| 16716 |
\define@key[psset]{optexp}{startnode}{\edef\POE@key@startnode{#1}}% |
| 16717 |
\define@key[psset]{optexp}{stopnode}{\edef\POE@key@stopnode{#1}}% |
| 16718 |
\psset[optexp]{% |
| 16719 |
startnode=auto, |
| 16720 |
stopnode=auto |
| 16721 |
}% |
| 16722 |
% \end{macrocode} |
| 16723 |
% |
| 16724 |
% \section{Layering} |
| 16725 |
% \begin{macrocode} |
| 16726 |
\newenvironment{optexp}{\Collect@Body\POE@collect}{}% |
| 16727 |
\long\def\POE@collect#1{% |
| 16728 |
\psset[optexp]{optexpenv} |
| 16729 |
\global\POE@oldcnt=\POE@cnt |
| 16730 |
\bgroup |
| 16731 |
\psset[optexp]{backlayer=true, frontlayer=false}#1% |
| 16732 |
\egroup |
| 16733 |
\gdef\POE@complist{}\global\POE@cnt=\POE@oldcnt\relax |
| 16734 |
\psset[optexp]{backlayer=false, frontlayer=true}% |
| 16735 |
#1\ignorespaces}% |
| 16736 |
% \end{macrocode} |
| 16737 |
% \begin{macro}{\backlayer} |
| 16738 |
% \begin{macrocode} |
| 16739 |
\def\backlayer#1{\ifPOE@backlayer #1\fi\ignorespaces}% |
| 16740 |
% \end{macrocode} |
| 16741 |
% \end{macro} |
| 16742 |
% \begin{macro}{\frontlayer} |
| 16743 |
% \begin{macrocode} |
| 16744 |
\def\frontlayer#1{\ifPOE@frontlayer #1\fi\ignorespaces}% |
| 16745 |
% \end{macrocode} |
| 16746 |
% \end{macro} |
| 16747 |
% |
| 16748 |
% \section{Connection code} |
| 16749 |
% \subsection{drawfiber} |
| 16750 |
% \begin{macro}{\POE@getnode} |
| 16751 |
% \begin{macrocode} |
| 16752 |
\def\POE@getnode#1#2\@nil{% |
| 16753 |
\ifx(#1\relax%) |
| 16754 |
\POE@getcoor#1#2 |
| 16755 |
\edef\POE@temp{{\pst@coor}}% |
| 16756 |
\else |
| 16757 |
\POE@checkcompname{#1#2}% |
| 16758 |
\edef\POE@temp{/\oenode{}{#1#2}\space}% |
| 16759 |
\fi% |
| 16760 |
}% |
| 16761 |
% \end{macrocode} |
| 16762 |
% \begin{macro}{\POE@getcoor} |
| 16763 |
% \begin{macrocode} |
| 16764 |
\def\POE@getcoor(#1){\pst@@getcoor{#1}}% |
| 16765 |
% \end{macrocode} |
| 16766 |
% \end{macro} |
| 16767 |
% \end{macro} |
| 16768 |
% |
| 16769 |
% \begin{macro}{\drawfiber} |
| 16770 |
% \begin{macrocode} |
| 16771 |
\def\drawfiber{\drawfiber@{Fiber}}% |
| 16772 |
% \end{macrocode} |
| 16773 |
% \end{macro} |
| 16774 |
% \begin{macro}{\drawwire} |
| 16775 |
% \begin{macrocode} |
| 16776 |
\def\drawwire{\drawwire@{Wire}}% |
| 16777 |
% \end{macrocode} |
| 16778 |
% \end{macro} |
| 16779 |
% \begin{macro}{\drawwire@} |
| 16780 |
% \begin{macrocode} |
| 16781 |
\def\drawwire@#1{% |
| 16782 |
\def\POE@setconnparam{% |
| 16783 |
\let\POE@key@connangleA\POE@key@wireangleA |
| 16784 |
\let\POE@key@connangleB\POE@key@wireangleB |
| 16785 |
\let\POE@key@connalign\POE@key@wirealign |
| 16786 |
\let\POE@key@connstyle\POE@key@wirestyle |
| 16787 |
}% |
| 16788 |
\drawconn@{#1} |
| 16789 |
}% |
| 16790 |
% \end{macrocode} |
| 16791 |
% \end{macro} |
| 16792 |
% \begin{macro}{\drawfiber@} |
| 16793 |
% \begin{macrocode} |
| 16794 |
\def\drawfiber@#1{% |
| 16795 |
\def\POE@setconnparam{% |
| 16796 |
\let\POE@key@connangleA\POE@key@fiberangleA |
| 16797 |
\let\POE@key@connangleB\POE@key@fiberangleB |
| 16798 |
\let\POE@key@connalign\POE@key@fiberalign |
| 16799 |
\let\POE@key@connstyle\POE@key@fiberstyle |
| 16800 |
}% |
| 16801 |
\drawconn@{#1}% |
| 16802 |
}% |
| 16803 |
% \end{macrocode} |
| 16804 |
% \end{macro} |
| 16805 |
% \begin{macro}{\drawconn@} |
| 16806 |
% \begin{macrocode} |
| 16807 |
\def\drawconn@#1{% |
| 16808 |
\ifPst@custom\else |
| 16809 |
\def\pst@par{style=#1}% |
| 16810 |
\fi |
| 16811 |
\@ifnextchar[%] |
| 16812 |
{\drawconn@i}{\drawconn@i[]}}% |
| 16813 |
\def\drawconn@i[#1]{% |
| 16814 |
\addafter@par{#1}% |
| 16815 |
\POE@normalizecomps\drawconn@ii} |
| 16816 |
\def\drawconn@ii{% |
| 16817 |
\@ifnextchar\bgroup |
| 16818 |
{\drawconn@iii}% |
| 16819 |
{}}% |
| 16820 |
\def\drawconn@iii#1{% |
| 16821 |
\def\POE@tempe{#1}\drawconn@iv}% |
| 16822 |
\def\drawconn@iv{% |
| 16823 |
\@ifnextchar\bgroup{\drawconn@v}{}}% |
| 16824 |
\def\drawconn@v#1{% |
| 16825 |
\expandafter\drawconn@vi\expandafter{\POE@tempe}{#1}% |
| 16826 |
\def\POE@tempe{#1}\drawconn@iv}% |
| 16827 |
\def\drawconn@vi#1#2{% |
| 16828 |
\begingroup |
| 16829 |
\let\psk@angleA\relax |
| 16830 |
\let\psk@angleB\relax |
| 16831 |
\use@par |
| 16832 |
\POE@setconnparam |
| 16833 |
\let\POE@angleA\psk@angleA |
| 16834 |
\let\POE@angleB\psk@angleB |
| 16835 |
\ifx\psk@angleA\relax |
| 16836 |
\def\psk@angleA{0 }%3 |
| 16837 |
\fi |
| 16838 |
\ifx\psk@angleB\relax |
| 16839 |
\def\psk@angleB{0 }% |
| 16840 |
\fi |
| 16841 |
\def\POE@tempa{#1} |
| 16842 |
\ifx\POE@tempa\@empty |
| 16843 |
\edef\POE@comps{/\oenode{}{}\space} |
| 16844 |
\else |
| 16845 |
\expandafter\POE@getnode#1\@nil |
| 16846 |
\edef\POE@comps{\POE@temp} |
| 16847 |
\fi |
| 16848 |
\def\POE@tempb{#2} |
| 16849 |
\ifx\POE@tempb\@empty |
| 16850 |
\edef\POE@comps{/\oenode{}{}\space \POE@comps} |
| 16851 |
\else |
| 16852 |
\expandafter\POE@getnode#2\@nil |
| 16853 |
\edef\POE@comps{\POE@temp\space \POE@comps} |
| 16854 |
\fi |
| 16855 |
\ifPOE@backlayer |
| 16856 |
\ifx\POE@key@startnode\POE@str@auto\else |
| 16857 |
\POE@pnode{/\POE@key@startnode\space \POE@comps exch pop |
| 16858 |
\POE@dict{GetIfcOrNodeCoord} \tx@UserCoor}{@@A} |
| 16859 |
\fi |
| 16860 |
\ifx\POE@key@stopnode\POE@str@auto\else |
| 16861 |
\POE@pnode{/\POE@key@stopnode\space \POE@comps pop |
| 16862 |
\POE@dict{GetIfcOrNodeCoord} \tx@UserCoor}{@@B} |
| 16863 |
\fi |
| 16864 |
\ifx\POE@key@startnode\POE@str@auto |
| 16865 |
\ifx\POE@key@stopnode\POE@str@auto |
| 16866 |
\POE@pnode{\POE@comps exch \POE@dict{NearestNode} |
| 16867 |
\tx@UserCoor}{@@A} |
| 16868 |
\POE@pnode{\POE@comps pop |
| 16869 |
\POE@dict{/N@@@A @GetCenter ToVec NearestNode} |
| 16870 |
\tx@UserCoor}{@@B} |
| 16871 |
\else |
| 16872 |
\POE@pnode{\POE@comps exch pop /N@@@B |
| 16873 |
\POE@dict{@GetCenter ToVec NearestNode} |
| 16874 |
\tx@UserCoor}{@@A} |
| 16875 |
\fi |
| 16876 |
\else\ifx\POE@key@stopnode\POE@str@auto |
| 16877 |
\POE@pnode{\POE@comps pop /N@@@A |
| 16878 |
\POE@dict{@GetCenter ToVec NearestNode} |
| 16879 |
\tx@UserCoor}{@@B} |
| 16880 |
\fi\fi |
| 16881 |
\pst@getcoor{@@A}\POE@tempa |
| 16882 |
\pst@getcoor{@@B}\POE@tempb |
| 16883 |
\ifx\POE@angleA\relax |
| 16884 |
\ifx\POE@key@connalign\POE@str@absolute |
| 16885 |
\psset{angleA=\POE@key@connangleA}% |
| 16886 |
\else |
| 16887 |
\psset{angleA=! \POE@dict{% |
| 16888 |
\POE@tempb \POE@tempa \POE@comps exch |
| 16889 |
\POE@key@connalign\space RelConnAngle |
| 16890 |
\POE@key@connangleA\space add } |
| 16891 |
}% |
| 16892 |
\fi |
| 16893 |
\fi |
| 16894 |
\ifx\POE@angleB\relax |
| 16895 |
\ifx\POE@key@connalign\POE@str@absolute |
| 16896 |
\psset{angleB=\POE@key@connangleB}% |
| 16897 |
\else |
| 16898 |
\psset{angleB=! \POE@dict{% |
| 16899 |
\POE@tempa \POE@tempb \POE@comps |
| 16900 |
\POE@key@connalign\space RelConnAngle |
| 16901 |
\POE@key@connangleB\space add} |
| 16902 |
}% |
| 16903 |
\fi |
| 16904 |
\fi |
| 16905 |
\@nameuse{nc\POE@key@connstyle}{@@A}{@@B} |
| 16906 |
\fi |
| 16907 |
\endgroup |
| 16908 |
}% |
| 16909 |
% \end{macrocode} |
| 16910 |
% \end{macro} |
| 16911 |
% \begin{macro}{POE@pnode} |
| 16912 |
% Do some trickery to define \cs{pnode} inside \cs{pscustom}, which is |
| 16913 |
% required if one wants to use \cs{drawfiber} inside \cs{pscustom}. |
| 16914 |
% \begin{macrocode} |
| 16915 |
\def\POE@pnode#1#2{% |
| 16916 |
\ifPst@custom |
| 16917 |
\code{% |
| 16918 |
gsave |
| 16919 |
/currentpoint load stopped { 0 0 moveto } if |
| 16920 |
1 8.3021995 div dup neg scale |
| 16921 |
tx@NodeDict begin |
| 16922 |
{#1 \tx@ScreenCoor } false /N@#2 10 {InitPnode} |
| 16923 |
/NodeScale {} def NewNode |
| 16924 |
end |
| 16925 |
grestore |
| 16926 |
}% |
| 16927 |
\else |
| 16928 |
\pnode(!#1){#2} |
| 16929 |
\fi |
| 16930 |
}% |
| 16931 |
% \end{macrocode} |
| 16932 |
% \end{macro} |
| 16933 |
% |
| 16934 |
% \subsection{drawbeam} |
| 16935 |
% |
| 16936 |
% \begin{macro}{\begin@BeamObj} |
| 16937 |
% \begin{macrocode} |
| 16938 |
\def\begin@BeamObj{% |
| 16939 |
\addbefore@par{n=n}% |
| 16940 |
\begin@SpecialObj% |
| 16941 |
\addto@pscode{% |
| 16942 |
\pst@optexpdict |
| 16943 |
/loadbeampoints \POE@key@loadbeampoints\space def |
| 16944 |
/loadbeam \ifPOE@loadbeam true \else false \fi def |
| 16945 |
/beamangle \POE@key@beamangle\space def |
| 16946 |
/beamdiv \POE@key@beamdiv\space def |
| 16947 |
/savebeampoints \POE@key@savebeampoints\space def |
| 16948 |
/savebeam \ifPOE@savebeam true \else false \fi def |
| 16949 |
/startinsidecount \POE@key@startinsidecount\space cvi def |
| 16950 |
startinsidecount 0 eq { |
| 16951 |
/beaminsidefirst false def |
| 16952 |
/startinside false def |
| 16953 |
} { |
| 16954 |
/beaminsidefirst \ifPOE@beaminsidefirst true \else false \fi def |
| 16955 |
/startinside \ifPOE@startinside true \else false \fi def |
| 16956 |
} ifelse |
| 16957 |
/stopinsidecount \POE@key@stopinsidecount\space cvi def |
| 16958 |
stopinsidecount 0 eq { |
| 16959 |
/beaminsidelast false def |
| 16960 |
/stopinside false def |
| 16961 |
} { |
| 16962 |
/beaminsidelast \ifPOE@beaminsidelast true \else false \fi def |
| 16963 |
/stopinside \ifPOE@stopinside true \else false \fi def |
| 16964 |
} ifelse |
| 16965 |
/beaminside \ifPOE@beaminside true \else false \fi def |
| 16966 |
/connectifc \ifPOE@raytrace false \else true \fi def |
| 16967 |
/beamalign |
| 16968 |
\ifx\POE@key@beamalign\POE@str@absolute\space |
| 16969 |
absolute |
| 16970 |
\else\ifx\POE@key@beamalign\POE@str@relative\space |
| 16971 |
relative |
| 16972 |
\else |
| 16973 |
firstcomp |
| 16974 |
\fi\fi def |
| 16975 |
/beampathskip \POE@key@beampathskip\space def |
| 16976 |
\POE@key@beampathcount\space dup -1 gt { beampathskip add } if /beampathcount ED |
| 16977 |
/useNA \ifPOE@useNA true \else false \fi def |
| 16978 |
/aligntovector \ifx\POE@key@beamnodealign\POE@str@vector true \else false \fi def |
| 16979 |
/beamdiffractionorder |
| 16980 |
\ifx\POE@key@beamdiffractionorder\@empty null |
| 16981 |
\else\POE@key@beamdiffractionorder\space |
| 16982 |
\fi def |
| 16983 |
/beammode |
| 16984 |
\ifx\POE@key@beammode\POE@str@reflective |
| 16985 |
refl |
| 16986 |
\else\ifx\POE@key@beammode\POE@str@transmittive |
| 16987 |
trans |
| 16988 |
\else |
| 16989 |
auto |
| 16990 |
\fi\fi def |
| 16991 |
}% |
| 16992 |
\let\tx@Line\POE@tx@Line |
| 16993 |
}% |
| 16994 |
% \end{macrocode} |
| 16995 |
% \end{macro} |
| 16996 |
% |
| 16997 |
% \begin{macro}{\begin@WideBeamObj} |
| 16998 |
% \begin{macrocode} |
| 16999 |
\def\begin@WideBeamObj{% |
| 17000 |
\addbefore@par{style=Beam}% |
| 17001 |
\begin@BeamObj |
| 17002 |
\let\pst@linetype\pst@arrowtype |
| 17003 |
\pst@addarrowdef% |
| 17004 |
}% |
| 17005 |
% \end{macrocode} |
| 17006 |
% \end{macro} |
| 17007 |
% |
| 17008 |
% \begin{macro}{\begin@SingleBeamObj} |
| 17009 |
% \begin{macrocode} |
| 17010 |
\let\begin@SingleBeamObj\begin@WideBeamObj |
| 17011 |
% \end{macrocode} |
| 17012 |
% \end{macro} |
| 17013 |
% |
| 17014 |
% \begin{macro}{\drawbeam} |
| 17015 |
% \begin{macrocode} |
| 17016 |
\def\drawbeam{\pst@object{drawbeam}}% |
| 17017 |
\def\drawbeam@i{% |
| 17018 |
\begin@SingleBeamObj |
| 17019 |
\POE@getcomps[\drawbeam@ii% |
| 17020 |
}% |
| 17021 |
% \end{macrocode} |
| 17022 |
% \end{macro} |
| 17023 |
% |
| 17024 |
% \begin{macro}{\drawwidebeam} |
| 17025 |
% \begin{macrocode} |
| 17026 |
\def\drawwidebeam{\pst@object{drawwidebeam}}% |
| 17027 |
\def\drawwidebeam@i{% |
| 17028 |
\begin@WideBeamObj |
| 17029 |
\POE@getcomps[\drawwidebeam@ii% |
| 17030 |
}% |
| 17031 |
% \end{macrocode} |
| 17032 |
% \end{macro} |
| 17033 |
% |
| 17034 |
% \begin{macro}{\POE@beam@use@pscode} |
| 17035 |
% |
| 17036 |
% This is a hack which allows us to leave the names and coordinates of the |
| 17037 |
% beam end points on the stack after the \opt{@endspecial} call. This replaces |
| 17038 |
% \nxLcs{use@pscode} in \nxLcs{end@BeamObj}. These values on the stack must be |
| 17039 |
% consumed directly after closing the beam object. |
| 17040 |
% \begin{macrocode} |
| 17041 |
\def\POE@beam@use@pscode{% |
| 17042 |
\pstverb{% |
| 17043 |
\pst@dict |
| 17044 |
\tx@STP |
| 17045 |
\pst@newpath |
| 17046 |
\psk@origin |
| 17047 |
\psk@swapaxes |
| 17048 |
\pst@code |
| 17049 |
end |
| 17050 |
count /ocount exch def |
| 17051 |
}% |
| 17052 |
\gdef\pst@code{}% |
| 17053 |
}% |
| 17054 |
% \end{macrocode} |
| 17055 |
% \end{macro} |
| 17056 |
% |
| 17057 |
% \begin{macro}{\end@BeamObj} |
| 17058 |
% \begin{macrocode} |
| 17059 |
\def\end@BeamObj{% |
| 17060 |
\addto@pscode{ end }% |
| 17061 |
\let\psk@fillstyle\relax |
| 17062 |
\ifPOE@optexpenv |
| 17063 |
\ifPOE@frontlayer |
| 17064 |
% \end{macrocode} |
| 17065 |
% Erase all beam-drawing code and leave only \opt{false} on the stack to |
| 17066 |
% indicate that no beampoints should be stored. |
| 17067 |
% \begin{macrocode} |
| 17068 |
\def\pst@code{ false false }% |
| 17069 |
\fi |
| 17070 |
\fi |
| 17071 |
\let\use@pscode\POE@beam@use@pscode |
| 17072 |
\end@SpecialObj% |
| 17073 |
}% |
| 17074 |
% \end{macrocode} |
| 17075 |
% \end{macro} |
| 17076 |
% |
| 17077 |
% \begin{macro}{\drawbeam@ii} |
| 17078 |
% \begin{macrocode} |
| 17079 |
\def\drawbeam@ii{% |
| 17080 |
\ifodd |
| 17081 |
% \end{macrocode} |
| 17082 |
% Do not draw anything only if both linestyle and ArrowInside are not set. |
| 17083 |
% \begin{macrocode} |
| 17084 |
\ifx\pslinestyle\@none\ifx\psk@ArrowInside\@empty 1\else 0\fi\else 0\fi |
| 17085 |
\addto@pscode{ cleartomark false false }% |
| 17086 |
\else |
| 17087 |
% \end{macrocode} |
| 17088 |
% Get the beamproperties from the first component if it is a source. |
| 17089 |
% \begin{macrocode} |
| 17090 |
\POE@HandleSourceBeam |
| 17091 |
% \end{macrocode} |
| 17092 |
% I need to pack it this way in order to avoid replacing the \opt{n} inside the |
| 17093 |
% code here. This must be done later, when it refers to the correct refractive |
| 17094 |
% indices. |
| 17095 |
% \begin{macrocode} |
| 17096 |
\addto@pscode{% |
| 17097 |
{/nbeam {\POE@key@n cvx exec} bind def |
| 17098 |
\ifPOE@pswarning |
| 17099 |
/Warning /PrintWarning load def |
| 17100 |
\else |
| 17101 |
/Warning /pop load def |
| 17102 |
\fi}% |
| 17103 |
[ \POE@key@beampos\space counttomark dup |
| 17104 |
0 eq { |
| 17105 |
pop 0 0 |
| 17106 |
} { |
| 17107 |
1 eq { |
| 17108 |
0 exch |
| 17109 |
} if |
| 17110 |
} ifelse \tx@ScreenCoor] cvx |
| 17111 |
beamangle |
| 17112 |
currentdict /lastBeamPointTmp undef |
| 17113 |
currentdict /lastVecTmp undef |
| 17114 |
loadbeampoints 1 ge |
| 17115 |
tx@NodeDict /N@\oenodeBeam{\POE@key@loadbeampoints} known and { |
| 17116 |
/N@\oenodeBeam{\POE@key@loadbeampoints} @GetCenter ToVec |
| 17117 |
/lastBeamPointTmp ED |
| 17118 |
} if |
| 17119 |
currentdict /lastVec\POE@key@loadbeampoints\space known |
| 17120 |
loadbeam and { |
| 17121 |
/lastVecTmp /lastVec\POE@key@loadbeampoints\space load def |
| 17122 |
} if |
| 17123 |
TraceBeam |
| 17124 |
\POE@strokesinglebeam |
| 17125 |
savebeampoints 1 ge |
| 17126 |
currentdict /lastBeamPointTmp known and dup { |
| 17127 |
lastBeamPointTmp |
| 17128 |
/N@\oenodeBeam{\POE@key@savebeampoints}\space 4 -1 roll |
| 17129 |
} if |
| 17130 |
savebeam currentdict /lastVecTmp known and dup { |
| 17131 |
/prevVec\POE@key@savebeampoints\space |
| 17132 |
currentdict /prevVecTmp known { prevVecTmp }{ 0 0 } ifelse |
| 17133 |
/lastVec\POE@key@savebeampoints\space lastVecTmp 7 -1 roll |
| 17134 |
} if |
| 17135 |
}% |
| 17136 |
\fi |
| 17137 |
\end@BeamObj |
| 17138 |
\POE@Verb{% |
| 17139 |
{ tx@OptexpDict begin ToVec def ToVec def end } if |
| 17140 |
{ \tx@NodeScale @NewNode } if |
| 17141 |
}% |
| 17142 |
}% |
| 17143 |
% \end{macrocode} |
| 17144 |
% \end{macro} |
| 17145 |
% This fix is necessary for pst-node since version 1.21. |
| 17146 |
% \begin{macrocode} |
| 17147 |
\def\tx@NodeScale{% |
| 17148 |
\pst@nodedict |
| 17149 |
/NodeScale {\ifx\pstnodescale\@undefined\else\pstnodescale\fi} def |
| 17150 |
end } |
| 17151 |
% \end{macrocode} |
| 17152 |
% |
| 17153 |
% \begin{macro}{\POE@strokesinglebeam} |
| 17154 |
% \begin{macrocode} |
| 17155 |
\def\POE@strokesinglebeam{% |
| 17156 |
gsave |
| 17157 |
/Lineto /lineto load def |
| 17158 |
20 dict begin |
| 17159 |
DrawbeamPrepare |
| 17160 |
% \end{macrocode} |
| 17161 |
% If there are only three elements or less on the stack, the first ray |
| 17162 |
% misses the next interface or is even parallel to the input interface. |
| 17163 |
% \begin{macrocode} |
| 17164 |
counttomark 3 gt { |
| 17165 |
% \end{macrocode} |
| 17166 |
% Define some parameters for Drawbeam which are based on TeX-parameters |
| 17167 |
% \begin{macrocode} |
| 17168 |
\ifx\psk@arrowA\arrowType@H |
| 17169 |
\pst@number\pshooklength |
| 17170 |
\else |
| 17171 |
\psk@arrowsize\space CLW mul add dup \psk@arrowlength\space mul exch \psk@arrowinset mul neg add |
| 17172 |
\fi |
| 17173 |
/arrowlength exch def |
| 17174 |
/arrowminlength \POE@key@ArrowInsideMinLength\space\pst@number\psunit mul def |
| 17175 |
/arrowmaxlength \POE@key@ArrowInsideMaxLength\space\pst@number\psunit mul def |
| 17176 |
/arrowpos \psk@ArrowInsidePos\space def |
| 17177 |
/arrowno \psk@ArrowInsideNo\space cvi def |
| 17178 |
/ArrowPosStart \psk@ArrowInsideOffset\space def |
| 17179 |
/dArrowPosStart \psk@ArrowInsidePos\space def |
| 17180 |
counttomark 3 idiv /N exch def |
| 17181 |
(\psk@ArrowInside) length 0 gt { |
| 17182 |
DrawbeamArrowInside |
| 17183 |
}{ |
| 17184 |
DrawbeamSimple |
| 17185 |
} ifelse |
| 17186 |
} if |
| 17187 |
cleartomark |
| 17188 |
end |
| 17189 |
\tx@setlinejoin |
| 17190 |
\pst@number\pslinewidth SLW |
| 17191 |
\pst@usecolor\pslinecolor |
| 17192 |
\tx@setStrokeTransparency |
| 17193 |
\@nameuse{psls@\pslinestyle} |
| 17194 |
grestore |
| 17195 |
}% |
| 17196 |
% \end{macrocode} |
| 17197 |
% \end{macro} |
| 17198 |
% |
| 17199 |
% \begin{macro}{\drawwidebeam@ii} |
| 17200 |
% \begin{macrocode} |
| 17201 |
\def\drawwidebeam@ii{% |
| 17202 |
\def\pst@fill##1{ gsave ##1 grestore }% |
| 17203 |
% \end{macrocode} |
| 17204 |
% Get the beamproperties from the first component if it is a source. |
| 17205 |
% \begin{macrocode} |
| 17206 |
\POE@HandleSourceBeam |
| 17207 |
\addto@pscode{% |
| 17208 |
{/nbeam {\POE@key@n cvx exec} bind def |
| 17209 |
\ifPOE@pswarning |
| 17210 |
/Warning /PrintWarning load def |
| 17211 |
\else |
| 17212 |
/Warning /pop load def |
| 17213 |
\fi}% |
| 17214 |
}% |
| 17215 |
% \end{macrocode} |
| 17216 |
% arrange and create the input vectors |
| 17217 |
% \begin{macrocode} |
| 17218 |
\addto@pscode{% |
| 17219 |
beamangle dup |
| 17220 |
beamdiv 0.5 mul dup 4 -1 roll add 3 1 roll sub |
| 17221 |
}% |
| 17222 |
% \end{macrocode} |
| 17223 |
% the start positions |
| 17224 |
% \begin{macrocode} |
| 17225 |
\addto@pscode{% |
| 17226 |
[ \POE@key@beampos\space counttomark dup |
| 17227 |
0 eq { |
| 17228 |
pop 0 0 |
| 17229 |
} { |
| 17230 |
1 eq { |
| 17231 |
0 exch |
| 17232 |
} if |
| 17233 |
} ifelse |
| 17234 |
% \end{macrocode} |
| 17235 |
% if \opt{beamwidth} is defined at Postscript level, it was defined from the source object. |
| 17236 |
% \begin{macrocode} |
| 17237 |
currentdict /beamwidth known { |
| 17238 |
beamwidth currentdict /beamwidth undef |
| 17239 |
} { |
| 17240 |
mark \POE@key@beamwidth\space counttomark 0 eq { 0 } if exch pop |
| 17241 |
} ifelse 0.5 mul |
| 17242 |
3 copy add \tx@ScreenCoor\space ToVec |
| 17243 |
5 1 roll sub \tx@ScreenCoor |
| 17244 |
] cvx |
| 17245 |
}% |
| 17246 |
% \end{macrocode} |
| 17247 |
% rearrange options |
| 17248 |
% \begin{macrocode} |
| 17249 |
\addto@pscode{ exch 4 -1 roll 4 2 roll exch }% |
| 17250 |
% \end{macrocode} |
| 17251 |
% stroke and/or fill |
| 17252 |
% \begin{macrocode} |
| 17253 |
\addto@pscode{% |
| 17254 |
counttomark mark exch 2 add 1 roll |
| 17255 |
gsave |
| 17256 |
\ifx\psk@fillstyle\relax |
| 17257 |
currentdict /fillBeam undef |
| 17258 |
\else |
| 17259 |
/fillBeam {\psk@fillstyle} def |
| 17260 |
\fi |
| 17261 |
/strokeBeam |
| 17262 |
\ifx\pslinestyle\@none false \else true \fi |
| 17263 |
\ifx\psk@ArrowInside\@empty false \else true \fi or def |
| 17264 |
[/lastBeamPointTmpLow /lastBeamPointTmpUp |
| 17265 |
/lastVecTmpLow /lastVecTmpUp] |
| 17266 |
{currentdict exch undef} forall |
| 17267 |
tx@NodeDict /N@\oenodeBeamLow{\POE@key@loadbeampoints} known |
| 17268 |
tx@NodeDict /N@\oenodeBeamUp{\POE@key@loadbeampoints} known |
| 17269 |
loadbeampoints 1 ge and and { |
| 17270 |
/N@\oenodeBeamLow{\POE@key@loadbeampoints} @GetCenter ToVec |
| 17271 |
/lastBeamPointTmpLow ED |
| 17272 |
/N@\oenodeBeamUp{\POE@key@loadbeampoints} @GetCenter ToVec |
| 17273 |
/lastBeamPointTmpUp ED |
| 17274 |
} if |
| 17275 |
loadbeam |
| 17276 |
currentdict /lastVecLow\POE@key@loadbeampoints\space known and |
| 17277 |
currentdict /lastVecUp\POE@key@loadbeampoints\space known and { |
| 17278 |
/lastVecTmpLow /lastVecLow\POE@key@loadbeampoints\space load def |
| 17279 |
/lastVecTmpUp /lastVecUp\POE@key@loadbeampoints\space load def |
| 17280 |
} if |
| 17281 |
TraceAndFillWideBeam |
| 17282 |
grestore pop % pop off the mark |
| 17283 |
% \end{macrocode} |
| 17284 |
% Rearrange the points so that we can use two Drawbeam calls. |
| 17285 |
% |
| 17286 |
% \begin{macrocode} |
| 17287 |
counttomark 0 gt strokeBeam and { |
| 17288 |
counttomark dup /cnta ED /cntb ED |
| 17289 |
cnta 6 idiv { |
| 17290 |
cnta 3 roll /cnta cnta 3 sub def |
| 17291 |
/cntb cntb 3 sub def |
| 17292 |
cntb 3 roll /cntb cntb 3 sub def |
| 17293 |
} repeat |
| 17294 |
counttomark 2 idiv 1 add mark exch 1 roll |
| 17295 |
\POE@strokesinglebeam |
| 17296 |
\POE@strokesinglebeam |
| 17297 |
} { |
| 17298 |
pop % pop off the mark |
| 17299 |
} ifelse |
| 17300 |
currentdict /fillBeam known strokeBeam or |
| 17301 |
savebeampoints 1 ge and |
| 17302 |
currentdict /lastBeamPointTmpLow known and |
| 17303 |
currentdict /lastBeamPointTmpUp known and dup { |
| 17304 |
lastBeamPointTmpLow /N@\oenodeBeamLow{\POE@key@savebeampoints} |
| 17305 |
lastBeamPointTmpUp /N@\oenodeBeamUp{\POE@key@savebeampoints} |
| 17306 |
7 -1 roll |
| 17307 |
} if |
| 17308 |
currentdict /fillBeam known strokeBeam or |
| 17309 |
savebeam and |
| 17310 |
currentdict /lastVecTmpLow known and |
| 17311 |
currentdict /lastVecTmpUp known and dup { |
| 17312 |
/prevVecLow\POE@key@savebeampoints\space /prevVecUp\POE@key@savebeampoints\space |
| 17313 |
currentdict /prevVecLow known currentdict /prevVecUp known and { |
| 17314 |
prevVecLow 3 -1 roll prevVecUp |
| 17315 |
} { |
| 17316 |
0 0 3 -1 roll 0 0 |
| 17317 |
} ifelse |
| 17318 |
/lastVecLow\POE@key@savebeampoints\space lastVecTmpLow |
| 17319 |
/lastVecUp\POE@key@savebeampoints\space lastVecTmpUp |
| 17320 |
13 -1 roll |
| 17321 |
} if |
| 17322 |
}% |
| 17323 |
\end@BeamObj |
| 17324 |
\POE@Verb{% |
| 17325 |
{ tx@OptexpDict begin 4 { ToVec def } repeat end } if |
| 17326 |
{ \tx@NodeScale @NewNode @NewNode } if |
| 17327 |
}% |
| 17328 |
}% |
| 17329 |
% \end{macrocode} |
| 17330 |
% \end{macro} |
| 17331 |
% |
| 17332 |
% \begin{macro}{\tx@Drawbeam} |
| 17333 |
% \begin{macrocode} |
| 17334 |
\pst@def{Drawbeam}< |
| 17335 |
% \end{macrocode} |
| 17336 |
% Remove trailing empty line parts. |
| 17337 |
% \begin{macrocode} |
| 17338 |
{ counttomark 6 le { |
| 17339 |
exit |
| 17340 |
} if |
| 17341 |
3 index not { |
| 17342 |
pop pop pop |
| 17343 |
}{ |
| 17344 |
exit |
| 17345 |
} ifelse |
| 17346 |
} loop |
| 17347 |
% \end{macrocode} |
| 17348 |
% Remove heading empty line parts. Note, that the first point must not have |
| 17349 |
% 'draw = true', because it is the starting point which we have to move to. |
| 17350 |
% \begin{macrocode} |
| 17351 |
{ counttomark 3 le { |
| 17352 |
exit |
| 17353 |
} if |
| 17354 |
counttomark 3 sub index not { |
| 17355 |
counttomark -3 roll pop pop pop |
| 17356 |
}{ |
| 17357 |
exit |
| 17358 |
} ifelse |
| 17359 |
} loop |
| 17360 |
% \end{macrocode} |
| 17361 |
% \begin{macrocode} |
| 17362 |
counttomark 3 le { |
| 17363 |
% \end{macrocode} |
| 17364 |
% first ray misses the next interface or is even parallel to the input interface. |
| 17365 |
% \begin{macrocode} |
| 17366 |
cleartomark |
| 17367 |
}{ |
| 17368 |
% \end{macrocode} |
| 17369 |
% This is the /Line definition from \opt{pstricks-add}, adapted to the beam path |
| 17370 |
% structure which includes the boolean values to indicate if a line is drawn, or |
| 17371 |
% if we use moveto. There was no way to patch the original definition to account |
| 17372 |
% for the moveto parts and avoid duplicating the code. |
| 17373 |
% \begin{macrocode} |
| 17374 |
counttomark 3 div cvi /N ED |
| 17375 |
(\psk@ArrowInside) length 0 gt { |
| 17376 |
\ifx\psk@arrowA\arrowType@H % do we have a Hook arrow at the beginning? |
| 17377 |
\pst@number\pshooklength % yes |
| 17378 |
\else |
| 17379 |
\psk@arrowsize\space CLW mul add dup \psk@arrowlength\space mul exch \psk@arrowinset mul neg add |
| 17380 |
\fi |
| 17381 |
/arrowlength exch def |
| 17382 |
6 copy pop % copy all four values for the arrow line |
| 17383 |
/y1 ED /x1 ED pop /y2 ED /x2 ED % save them |
| 17384 |
/Alpha y2 y1 sub x2 x1 sub Atan def % the gradient of the line |
| 17385 |
pop 3 -1 roll 5 1 roll |
| 17386 |
ArrowA |
| 17387 |
x1 Alpha cos arrowlength mul add % dx add |
| 17388 |
y1 Alpha sin arrowlength mul add % dy add, to get the current point at the end of the arrow tip |
| 17389 |
5 -1 roll 3 1 roll true |
| 17390 |
/N N 1 sub def |
| 17391 |
N { |
| 17392 |
6 copy pop |
| 17393 |
/y1 ED /x1 ED pop /y2 ED /x2 ED /draw ED |
| 17394 |
% \end{macrocode} |
| 17395 |
% Check for line segment length and draw the arrow only, if the segment is long |
| 17396 |
% enough. This is in first place to avoid drawing an inside arrow for the |
| 17397 |
% pinhole which has three interfaces instead of one so that it can be used as |
| 17398 |
% real spatial filter. |
| 17399 |
% \begin{macrocode} |
| 17400 |
x1 y1 x2 y2 @ABDist dup |
| 17401 |
\POE@key@ArrowInsideMinLength\space\pst@number\psunit mul ge |
| 17402 |
exch \POE@key@ArrowInsideMaxLength\space\pst@number\psunit mul dup 0 lt |
| 17403 |
3 1 roll le or and { |
| 17404 |
x1 y1 |
| 17405 |
\psk@ArrowInsidePos\space 1 gt { |
| 17406 |
/Alpha y2 y1 sub x2 x1 sub Atan def |
| 17407 |
/ArrowPos \psk@ArrowInsideOffset\space def |
| 17408 |
/dArrowPos \psk@ArrowInsidePos\space abs def |
| 17409 |
\psk@ArrowInsideNo\space cvi { |
| 17410 |
/ArrowPos ArrowPos dArrowPos add def |
| 17411 |
x1 Alpha cos ArrowPos mul add |
| 17412 |
y1 Alpha sin ArrowPos mul add |
| 17413 |
6 index { ArrowInside } if |
| 17414 |
pop pop |
| 17415 |
} repeat |
| 17416 |
}{ |
| 17417 |
/ArrowPos \psk@ArrowInsideOffset\space def |
| 17418 |
/dArrowPos \psk@ArrowInsideNo 1 gt {% |
| 17419 |
1.0 \psk@ArrowInsideNo 1.0 add div |
| 17420 |
}{\psk@ArrowInsidePos } ifelse def |
| 17421 |
\psk@ArrowInsideNo\space cvi { |
| 17422 |
/ArrowPos ArrowPos dArrowPos add def |
| 17423 |
x2 x1 sub ArrowPos mul x1 add |
| 17424 |
y2 y1 sub ArrowPos mul y1 add |
| 17425 |
6 index { ArrowInside } if |
| 17426 |
pop pop |
| 17427 |
} repeat |
| 17428 |
} ifelse |
| 17429 |
pop pop |
| 17430 |
} if |
| 17431 |
draw {Lineto}{moveto} ifelse |
| 17432 |
} repeat |
| 17433 |
}{ |
| 17434 |
pop 5 copy 3 -1 roll pop |
| 17435 |
ArrowA pop pop pop pop |
| 17436 |
counttomark 3 idiv -1 2 { |
| 17437 |
pop { |
| 17438 |
lineto |
| 17439 |
}{ |
| 17440 |
moveto |
| 17441 |
} ifelse |
| 17442 |
} for |
| 17443 |
} ifelse |
| 17444 |
{CP 4 2 roll ArrowB lineto pop pop } {moveto} ifelse |
| 17445 |
% \end{macrocode} |
| 17446 |
% remove the mark |
| 17447 |
% \begin{macrocode} |
| 17448 |
pop |
| 17449 |
} ifelse |
| 17450 |
> |
| 17451 |
% \end{macrocode} |
| 17452 |
% \end{macro} |
| 17453 |
% |
| 17454 |
% \begin{macro}{\POE@getcomprange} |
| 17455 |
% \begin{macrocode} |
| 17456 |
\def\POE@getcomprange#1-#2\@nil{% |
| 17457 |
\ifx\\#2\\% |
| 17458 |
\ifx\\#1\\% |
| 17459 |
% \end{macrocode} |
| 17460 |
% empty option, use the current component ID |
| 17461 |
% \begin{macrocode} |
| 17462 |
\@tempcnta=\POE@cnt |
| 17463 |
\@tempcntb=\POE@cnt |
| 17464 |
\else |
| 17465 |
% \end{macrocode} |
| 17466 |
% A single number was given |
| 17467 |
% \begin{macrocode} |
| 17468 |
\@tempcnta=#1 |
| 17469 |
\@tempcntb=#1 |
| 17470 |
% \end{macrocode} |
| 17471 |
% Check if the number is valid, otherwise quit with an error. |
| 17472 |
% \begin{macrocode} |
| 17473 |
\ifodd |
| 17474 |
\ifnum 0<\@tempcnta\ifnum\@tempcntb>\the\POE@cnt \@ne\else\z@\fi\else\@ne\fi |
| 17475 |
\PackageError{pst-optexp}% |
| 17476 |
{Component ID \the\@tempcnta\space is not valid, |
| 17477 |
\ifnum\the\POE@cnt=0 no components have been defined\else |
| 17478 |
valid range is from 1 to \the\POE@cnt\fi} |
| 17479 |
\fi |
| 17480 |
\fi |
| 17481 |
\else |
| 17482 |
\ifx\\#1\\% |
| 17483 |
\@tempcnta=\@ne |
| 17484 |
\else |
| 17485 |
\@tempcnta=#1 |
| 17486 |
\fi |
| 17487 |
\edef\POE@temp{\POE@getfirstchar#2\@nil}% |
| 17488 |
\expandafter\ifx\POE@temp<\relax |
| 17489 |
\POE@getlastcompprev#2% |
| 17490 |
\else |
| 17491 |
\POE@getlastcomp#2% |
| 17492 |
\fi |
| 17493 |
\POE@checkandfixcomprange |
| 17494 |
\fi |
| 17495 |
}% |
| 17496 |
\def\POE@getcomprangeprev<#1-#2\@nil{% |
| 17497 |
\@tempcnta=\POE@cnt |
| 17498 |
\@tempcntb=\POE@cnt |
| 17499 |
\ifx\\#1\\% |
| 17500 |
\advance\@tempcnta by -1 |
| 17501 |
\else |
| 17502 |
\advance\@tempcnta by -#1 |
| 17503 |
\fi |
| 17504 |
\ifx\\#2\\\else |
| 17505 |
\edef\POE@temp{\POE@getfirstchar#2\@nil}% |
| 17506 |
\expandafter\ifx\POE@temp<\relax |
| 17507 |
\POE@getlastcompprev#2% |
| 17508 |
\else |
| 17509 |
\POE@getlastcomp#2% |
| 17510 |
\fi |
| 17511 |
\fi |
| 17512 |
\POE@checkandfixcomprange |
| 17513 |
}% |
| 17514 |
\def\POE@checkandfixcomprange{% |
| 17515 |
\ifnum\@tempcnta>\POE@cnt |
| 17516 |
\ifnum\@tempcntb>\POE@cnt |
| 17517 |
\PackageError{pst-optexp}% |
| 17518 |
{All components \the\@tempcnta-\the\@tempcntb\space out of range}% |
| 17519 |
\fi |
| 17520 |
\fi |
| 17521 |
\ifnum\@tempcnta<\@ne |
| 17522 |
\PackageWarning{pst-optexp}% |
| 17523 |
{Component ID \the\@tempcnta\space is not valid, setting to 1.}% |
| 17524 |
\@tempcnta=\@ne |
| 17525 |
\else\ifnum\@tempcnta>\POE@cnt |
| 17526 |
\PackageWarning{pst-optexp}% |
| 17527 |
{A: Component ID \the\@tempcnta\space is not valid, setting to \MessageBreak |
| 17528 |
the last defined value (\the\POE@cnt).}% |
| 17529 |
\@tempcnta=\POE@cnt |
| 17530 |
\fi\fi |
| 17531 |
\ifnum\@tempcntb>\POE@cnt |
| 17532 |
\PackageWarning{pst-optexp}% |
| 17533 |
{B: Component ID \the\@tempcntb\space is not valid, setting to \MessageBreak |
| 17534 |
the last defined value (\the\POE@cnt).}% |
| 17535 |
\@tempcntb=\POE@cnt |
| 17536 |
\else\ifnum\@tempcntb<\@ne |
| 17537 |
\PackageWarning{pst-optexp}% |
| 17538 |
{Component ID \the\@tempcntb\space is not valid, setting to 1.}% |
| 17539 |
\@tempcntb=\@ne |
| 17540 |
\fi\fi |
| 17541 |
}% |
| 17542 |
\def\POE@getlastcomp#1-{% |
| 17543 |
\ifx\\#1\\% |
| 17544 |
\ifnum\@tempcnta>\POE@cnt |
| 17545 |
\PackageError{pst-optexp}{All components \the\@tempcnta- out of range.}% |
| 17546 |
\fi% |
| 17547 |
\@tempcntb=\POE@cnt |
| 17548 |
\else |
| 17549 |
\@tempcntb=#1\relax |
| 17550 |
\fi |
| 17551 |
}% |
| 17552 |
\def\POE@getlastcompprev<#1-{% |
| 17553 |
\@tempcntb=\POE@cnt |
| 17554 |
\ifx\\#1\\% |
| 17555 |
\advance\@tempcntb by -1 |
| 17556 |
\else |
| 17557 |
\advance\@tempcntb by -#1 |
| 17558 |
\fi |
| 17559 |
}% |
| 17560 |
% \end{macrocode} |
| 17561 |
% \end{macro} |
| 17562 |
% |
| 17563 |
% \begin{macro}{\POE@getcomps} |
| 17564 |
% \begin{macrocode} |
| 17565 |
\def\POE@getcomps#1#2{% |
| 17566 |
\def\POE@aftercomps{\addto@pscode{#1 \POE@comps }#2}% |
| 17567 |
\def\POE@comps{}% |
| 17568 |
\POE@getcomps@i% |
| 17569 |
}% |
| 17570 |
\def\POE@getcomps@i{% |
| 17571 |
\@ifnextchar(%) |
| 17572 |
{\POE@getplanenode@i}% |
| 17573 |
{\POE@getcomps@ii} |
| 17574 |
}% |
| 17575 |
\def\POE@getcomps@ii{% |
| 17576 |
\@ifnextchar\bgroup{\POE@getcomps@iii}{\POE@aftercomps}% |
| 17577 |
}% |
| 17578 |
\def\POE@getfirstchar#1#2\@nil{#1}% |
| 17579 |
\def\POE@getprevcompid<#1\@nil{% |
| 17580 |
\ifx\\#1\\% |
| 17581 |
\number\numexpr\POE@cnt-1\relax |
| 17582 |
\else |
| 17583 |
\number\numpexp\POE@cnt-#1\relax |
| 17584 |
\fi |
| 17585 |
}% |
| 17586 |
\def\POE@getcomps@iii#1{% |
| 17587 |
\edef\POE@temp{\POE@getfirstchar#1{}\@nil}% |
| 17588 |
\ifx\POE@temp\@empty |
| 17589 |
\POE@getcomp{(\oenode{}{})}% |
| 17590 |
\else\expandafter\ifx\POE@temp(\relax%) |
| 17591 |
\POE@getplanenode#1% |
| 17592 |
\else\ifnum9<1\POE@temp\relax |
| 17593 |
\expandafter\POE@getcomprange#1-\@nil |
| 17594 |
\POE@getcomp{% |
| 17595 |
(\POE@str@basicname@prefix\POE@str@basicname@default) |
| 17596 |
\the\@tempcnta\space\the\@tempcntb\space GetCompRange % |
| 17597 |
}% |
| 17598 |
\else\expandafter\ifx\POE@temp<\relax |
| 17599 |
\expandafter\POE@getcomprangeprev#1-\@nil |
| 17600 |
\POE@getcomp{% |
| 17601 |
(\POE@str@basicname@prefix\POE@str@basicname@default) |
| 17602 |
\the\@tempcnta\space\the\@tempcntb\space GetCompRange % |
| 17603 |
}% |
| 17604 |
\else\expandafter\ifx\POE@temp-\relax |
| 17605 |
\POE@getcomprange#1-\@nil |
| 17606 |
\POE@getcomp{% |
| 17607 |
(\POE@str@basicname@prefix\POE@str@basicname@default) |
| 17608 |
\the\@tempcnta\space\the\@tempcntb\space GetCompRange % |
| 17609 |
}% |
| 17610 |
\else |
| 17611 |
\POE@checkcompname{#1}% |
| 17612 |
\POE@getcomp{(\oenode{}{#1})}% |
| 17613 |
\fi\fi\fi\fi\fi% |
| 17614 |
\POE@getcomps@i% |
| 17615 |
}% |
| 17616 |
% \end{macrocode} |
| 17617 |
% \end{macro} |
| 17618 |
% |
| 17619 |
% \begin{macro}{\POE@getplanenode} |
| 17620 |
% \begin{macrocode} |
| 17621 |
\def\POE@getplanenode(#1){% |
| 17622 |
\pst@@getcoor{#1}% |
| 17623 |
\advance\POE@nodecnt by 1 |
| 17624 |
\POE@getcomp{% |
| 17625 |
{\pst@coor} {0 1} |
| 17626 |
(\POE@str@basicname@default N@\the\POE@nodecnt) |
| 17627 |
{\tx@UserCoor} NewTempNodeComp |
| 17628 |
(\POE@str@basicname@default N@\the\POE@nodecnt) |
| 17629 |
}% |
| 17630 |
}% |
| 17631 |
\def\POE@getplanenode@i(#1){\POE@getplanenode(#1)\POE@getcomps@i}% |
| 17632 |
% \end{macrocode} |
| 17633 |
% \end{macro} |
| 17634 |
% |
| 17635 |
% \begin{macro}{\POE@getcomp} |
| 17636 |
% \begin{macrocode} |
| 17637 |
\def\POE@getcomp#1{% |
| 17638 |
\ifx\POE@comps\@empty |
| 17639 |
\edef\POE@tempc{#1}% |
| 17640 |
\else |
| 17641 |
\edef\POE@tempd{#1}% |
| 17642 |
\fi |
| 17643 |
\edef\POE@comps{#1 \POE@comps}% |
| 17644 |
}% |
| 17645 |
% \end{macrocode} |
| 17646 |
% \end{macro} |
| 17647 |
% \begin{macro}{\POE@normalizecomps} |
| 17648 |
% Expands all component parameters by resolving the ranges, i.e. {1-3} |
| 17649 |
% becomes {1}{2}{3}. Nodes are wrapped with brackets, if necessary: |
| 17650 |
% (1,1) becomes {(1,1)}. |
| 17651 |
% \begin{macrocode} |
| 17652 |
\def\POE@normalizecomps#1{% |
| 17653 |
\def\POE@aftercomps{\expandafter#1\POE@comps}% |
| 17654 |
\def\POE@comps{}% |
| 17655 |
\POE@normalizecomps@i% |
| 17656 |
}% |
| 17657 |
\def\POE@normalizecomps@i{% |
| 17658 |
\@ifnextchar(%) |
| 17659 |
{\POE@normalizecomps@ii}% |
| 17660 |
{\POE@normalizecomps@iii} |
| 17661 |
}% |
| 17662 |
\def\POE@normalizecomps@ii(#1){% |
| 17663 |
\edef\POE@comps{\POE@comps{(#1)}}% |
| 17664 |
\POE@normalizecomps@i |
| 17665 |
}% |
| 17666 |
\def\POE@normalizecomps@iii{% |
| 17667 |
\@ifnextchar\bgroup{\POE@normalizecomps@iv}{\POE@aftercomps}% |
| 17668 |
}% |
| 17669 |
% \end{macrocode} |
| 17670 |
% |
| 17671 |
% Analyze the content of the comp id and expand it accordingly. |
| 17672 |
% \begin{macrocode} |
| 17673 |
\def\POE@normalizecomps@iv#1{% |
| 17674 |
\edef\POE@temp{\POE@getfirstchar#1{}\@nil}% |
| 17675 |
\let\POE@tempb\POE@getcomprange |
| 17676 |
\ifnum9<1\POE@temp\relax |
| 17677 |
\def\POE@tempa{1}% |
| 17678 |
\else\expandafter\ifx\POE@temp-\relax |
| 17679 |
\def\POE@tempa{1}% |
| 17680 |
\else\expandafter\ifx\POE@temp<\relax |
| 17681 |
\def\POE@tempa{1}% |
| 17682 |
\let\POE@tempb\POE@getcomprangeprev |
| 17683 |
\else |
| 17684 |
\def\POE@tempa{0}% |
| 17685 |
\fi\fi\fi |
| 17686 |
\ifodd\POE@tempa |
| 17687 |
\POE@tempb#1-\@nil |
| 17688 |
\ifnum\@tempcnta<\@tempcntb \def\POE@rel{<}\def\POE@inc{\@ne}% |
| 17689 |
\else \def\POE@rel{>}\def\POE@inc{\m@ne}\fi |
| 17690 |
\advance\@tempcntb\POE@inc |
| 17691 |
\whiledo{\@tempcnta\POE@rel\@tempcntb}{% |
| 17692 |
\edef\POE@comps{\POE@comps{\the\@tempcnta}}% |
| 17693 |
\advance\@tempcnta\POE@inc |
| 17694 |
}% |
| 17695 |
\else |
| 17696 |
\edef\POE@comps{\POE@comps{#1}}% |
| 17697 |
\fi |
| 17698 |
\POE@normalizecomps@i% |
| 17699 |
}% |
| 17700 |
% \end{macrocode} |
| 17701 |
% \end{macro} |
| 17702 |
% |
| 17703 |
% \subsection{Automatic connections} |
| 17704 |
% |
| 17705 |
% \begin{macro}{\POE@PresetWireConn} |
| 17706 |
% Draw automatic wires for electrical components. |
| 17707 |
% \begin{macrocode} |
| 17708 |
\def\POE@PresetWireConn{% |
| 17709 |
\ifPOE@startbox\else |
| 17710 |
\ifPOE@wirepresetin@ |
| 17711 |
\drawwire@{WireIn}(\oenodeRefA{}){} |
| 17712 |
\else\ifPOE@fiberin@ |
| 17713 |
\drawfiber@{FiberIn}(\oenodeRefA{}){} |
| 17714 |
\fi\fi |
| 17715 |
\fi |
| 17716 |
\ifPOE@endbox\else |
| 17717 |
\ifPOE@wirepresetout@ |
| 17718 |
\drawwire@{WireOut}{}(\oenodeRefB{}) |
| 17719 |
\else\ifPOE@fiberout@ |
| 17720 |
\drawfiber@{FiberOut}{}(\oenodeRefB{}) |
| 17721 |
\fi\fi |
| 17722 |
\fi |
| 17723 |
}% |
| 17724 |
% \end{macrocode} |
| 17725 |
% \end{macro} |
| 17726 |
% \begin{macro}{\POE@PresetFiberConn} |
| 17727 |
% Draw automatic fiber or wires for fiber components. |
| 17728 |
% \begin{macrocode} |
| 17729 |
\def\POE@PresetFiberConn{% |
| 17730 |
\ifPOE@startbox\else |
| 17731 |
\ifPOE@fiberpresetin@ |
| 17732 |
\drawfiber@{FiberIn}(\oenodeRefA{}){} |
| 17733 |
\else\ifPOE@wirein@ |
| 17734 |
\drawwire@{WireIn}(\oenodeRefA{}){} |
| 17735 |
\fi\fi |
| 17736 |
\fi |
| 17737 |
\ifPOE@endbox\else |
| 17738 |
\ifPOE@fiberpresetout@ |
| 17739 |
\drawfiber@{FiberOut}{}(\oenodeRefB{}) |
| 17740 |
\else\ifPOE@wireout@ |
| 17741 |
\drawwire@{WireOut}{}(\oenodeRefB{}) |
| 17742 |
\fi\fi |
| 17743 |
\fi |
| 17744 |
}% |
| 17745 |
% \end{macrocode} |
| 17746 |
% \end{macro} |
| 17747 |
% |
| 17748 |
% \begin{macro}{\POE@InternalConn} |
| 17749 |
% \begin{macrocode} |
| 17750 |
\def\POE@InternalConn{% |
| 17751 |
\ifPOE@beam |
| 17752 |
\ifPOE@endbox |
| 17753 |
\drawbeam[raytrace=false](\oenodeRefA{}){} |
| 17754 |
\else\ifPOE@startbox |
| 17755 |
\drawbeam[raytrace=false]{}(\oenodeRefB{}) |
| 17756 |
\else |
| 17757 |
\drawbeam[raytrace=false](\oenodeRefA{}){}(\oenodeRefB{}) |
| 17758 |
\fi\fi |
| 17759 |
\else |
| 17760 |
\ifPOE@startbox\else |
| 17761 |
\ifPOE@fiberin@ |
| 17762 |
\drawfiber@{FiberIn}(\oenodeRefA{}){} |
| 17763 |
\else\ifPOE@wirein@ |
| 17764 |
\drawwire@{WireIn}(\oenodeRefA{}){} |
| 17765 |
\fi\fi |
| 17766 |
\fi |
| 17767 |
\ifPOE@endbox\else |
| 17768 |
\ifPOE@fiberout@ |
| 17769 |
\drawfiber@{FiberOut}{}(\oenodeRefB{}) |
| 17770 |
\else\ifPOE@wireout@ |
| 17771 |
\drawwire@{WireOut}{}(\oenodeRefB{}) |
| 17772 |
\fi\fi |
| 17773 |
\fi |
| 17774 |
\fi |
| 17775 |
}% |
| 17776 |
% \end{macrocode} |
| 17777 |
% \end{macro} |
| 17778 |
% |
| 17779 |
% \begin{macro}{\POE@usefiberorwirestyle} |
| 17780 |
% \begin{macrocode} |
| 17781 |
\def\POE@usefiberorwirestyle{% |
| 17782 |
\ifPOE@usefiberstyle |
| 17783 |
\psset{style=Fiber, arrows=-, ArrowInside=-}% |
| 17784 |
\else\ifPOE@usewirestyle |
| 17785 |
\psset{style=Wire, arrows=-, ArrowInside=-}% |
| 17786 |
\fi\fi |
| 17787 |
}% |
| 17788 |
% \end{macrocode} |
| 17789 |
% \end{macro} |
| 17790 |
% |
| 17791 |
% \section{Accessing component nodes} |
| 17792 |
% \begin{macro}{\POE@checkcompname} |
| 17793 |
% Check if a component with name \#1 was already defined. |
| 17794 |
% \begin{macrocode} |
| 17795 |
\def\POE@checkcompname#1{% |
| 17796 |
\@expandtwoargs\in@{,#1,}{,\POE@complist,}% |
| 17797 |
\ifin@\else |
| 17798 |
\PackageError{pst-optexp}{Component '#1' is undefined} |
| 17799 |
\fi |
| 17800 |
}% |
| 17801 |
% \end{macrocode} |
| 17802 |
% \end{macro} |
| 17803 |
% |
| 17804 |
% \begin{macro}{\oenode} |
| 17805 |
% Get the full node name of the node \#1 defined in component \#2. |
| 17806 |
% \begin{macrocode} |
| 17807 |
\def\oenode#1#2{% |
| 17808 |
\POE@str@basicname@prefix% |
| 17809 |
\ifx\\#2\\% |
| 17810 |
\POE@str@basicname@default\the\POE@cnt |
| 17811 |
\else |
| 17812 |
\ifnum9<1#2 |
| 17813 |
\POE@str@basicname@default |
| 17814 |
#2% |
| 17815 |
\else |
| 17816 |
\POE@prevnode#2\@nil |
| 17817 |
\POE@str@basicname@sep% |
| 17818 |
\fi% |
| 17819 |
\fi% |
| 17820 |
#1% |
| 17821 |
}% |
| 17822 |
% \end{macrocode} |
| 17823 |
% \end{macro} |
| 17824 |
% |
| 17825 |
% \begin{macro}{POE@prevnode} |
| 17826 |
% \begin{macrocode} |
| 17827 |
\def\POE@prevnode#1#2\@nil{% |
| 17828 |
\ifx<#1% |
| 17829 |
\POE@str@basicname@default |
| 17830 |
\ifx\\#2\\% |
| 17831 |
\number\numexpr\POE@cnt-1\relax |
| 17832 |
\else |
| 17833 |
\number\numexpr\POE@cnt-#2\relax |
| 17834 |
\fi |
| 17835 |
\else |
| 17836 |
#1#2% |
| 17837 |
\fi |
| 17838 |
}% |
| 17839 |
% \end{macrocode} |
| 17840 |
% \end{macro} |
| 17841 |
% |
| 17842 |
% Define some special nodes, which should be accessed always via these macros. |
| 17843 |
% |
| 17844 |
% \begin{macro}{\oenodeExt} |
| 17845 |
% The external node which is set with \opt{extnode}. |
| 17846 |
% \begin{macrocode} |
| 17847 |
\def\oenodeExt#1{\oenode{\POE@str@extnode@postfix}{#1}}% |
| 17848 |
% \end{macrocode} |
| 17849 |
% \end{macro} |
| 17850 |
% \begin{macro}{\oenodeIn} |
| 17851 |
% The first (input) node of the component. |
| 17852 |
% \begin{macrocode} |
| 17853 |
\def\oenodeIn#1{\oenode{1}{#1}}% |
| 17854 |
% \end{macrocode} |
| 17855 |
% \end{macro} |
| 17856 |
% \begin{macro}{\oenodeOut} |
| 17857 |
% The last (output) node of the component |
| 17858 |
% \begin{macrocode} |
| 17859 |
\def\oenodeOut#1{\oenode{N}{#1}}% |
| 17860 |
% \end{macrocode} |
| 17861 |
% \end{macro} |
| 17862 |
% \begin{macro}{\oenodeCenter} |
| 17863 |
% The center node of the component. |
| 17864 |
% \begin{macrocode} |
| 17865 |
\def\oenodeCenter#1{\oenode{Center}{#1}}% |
| 17866 |
% \end{macrocode} |
| 17867 |
% \end{macro} |
| 17868 |
% \begin{macro}{\oenodeLabel} |
| 17869 |
% The transformed label node of the component |
| 17870 |
% \begin{macrocode} |
| 17871 |
\def\oenodeLabel#1{\oenode{Label}{#1}}% |
| 17872 |
% \end{macrocode} |
| 17873 |
% \end{macro} |
| 17874 |
% \begin{macro}{\oenodeRefA} |
| 17875 |
% The first reference node which is used for positioning of the |
| 17876 |
% component. For dipoles it is equivalent to the (\#1) node. |
| 17877 |
% \begin{macrocode} |
| 17878 |
\def\oenodeRefA#1{\oenode{A}{#1}}% |
| 17879 |
% \end{macrocode} |
| 17880 |
% \end{macro} |
| 17881 |
% \begin{macro}{\oenodeRefB} |
| 17882 |
% The second reference node, for dipoles it is equivalent to the (\#2) |
| 17883 |
% node. |
| 17884 |
% \begin{macrocode} |
| 17885 |
\def\oenodeRefB#1{\oenode{B}{#1}}% |
| 17886 |
% \end{macrocode} |
| 17887 |
% \end{macro} |
| 17888 |
% \begin{macro}{\oenodeRotref} |
| 17889 |
% The rotation reference node. |
| 17890 |
% \begin{macrocode} |
| 17891 |
\def\oenodeRotref#1{\oenode{Rotref}{#1}}% |
| 17892 |
% \end{macrocode} |
| 17893 |
% \end{macro} |
| 17894 |
% \begin{macro}{\oenodeTrefA} |
| 17895 |
% The transformed first reference node, after applying parameters |
| 17896 |
% \opt{compshift}, \opt{compoffset} and \opt{angle}. |
| 17897 |
% \begin{macrocode} |
| 17898 |
\def\oenodeTrefA#1{\oenode{TrefA}{#1}}% |
| 17899 |
% \end{macrocode} |
| 17900 |
% \end{macro} |
| 17901 |
% \begin{macro}{\oenodeTrefB} |
| 17902 |
% The transformed second reference node. |
| 17903 |
% \begin{macrocode} |
| 17904 |
\def\oenodeTrefB#1{\oenode{TrefB}{#1}}% |
| 17905 |
% \end{macrocode} |
| 17906 |
% \end{macro} |
| 17907 |
% \begin{macro}{\oenode@RefA} |
| 17908 |
% The first reference node, after it was projected on the reflection |
| 17909 |
% plane of a tripole, at distance 1 from the center. |
| 17910 |
% \begin{macrocode} |
| 17911 |
\def\oenode@RefA#1{\oenode{@A}{#1}}% |
| 17912 |
% \end{macrocode} |
| 17913 |
% \end{macro} |
| 17914 |
% \begin{macro}{\oenode@RefB} |
| 17915 |
% The second referencen node, projected on the reflection plane. |
| 17916 |
% \begin{macrocode} |
| 17917 |
\def\oenode@RefB#1{\oenode{@B}{#1}}% |
| 17918 |
% \end{macrocode} |
| 17919 |
% \end{macro} |
| 17920 |
% \begin{macro}{\oenode@TrefA} |
| 17921 |
% The transformed, projected first reference node. |
| 17922 |
% \begin{macrocode} |
| 17923 |
\def\oenode@TrefA#1{\oenode{@TrefA}{#1}}% |
| 17924 |
% \end{macrocode} |
| 17925 |
% \end{macro} |
| 17926 |
% \begin{macro}{\oenode@TrefB} |
| 17927 |
% The transformed, projected second reference node. |
| 17928 |
% \begin{macrocode} |
| 17929 |
\def\oenode@TrefB#1{\oenode{@TrefB}{#1}}% |
| 17930 |
% \end{macrocode} |
| 17931 |
% \end{macro} |
| 17932 |
% \begin{macro}{\oenode@Origin} |
| 17933 |
% The origin of the component, available only for tripoles. Introduced |
| 17934 |
% to be able to compute the angle between AO and BO at later times |
| 17935 |
% (for \cs{rightangleprism} and \cs{optprism}. |
| 17936 |
% \begin{macrocode} |
| 17937 |
\def\oenode@Origin#1{\oenode{Origin}{#1}}% |
| 17938 |
% \end{macrocode} |
| 17939 |
% \end{macro} |
| 17940 |
% \begin{macro}{oenode@Path} |
| 17941 |
% Use this macro for internal use with \cs{pssavepath}. |
| 17942 |
% \begin{macrocode} |
| 17943 |
\def\oenode@Path#1{\oenode{Path@#1}{}}% |
| 17944 |
% \end{macrocode} |
| 17945 |
% \end{macro} |
| 17946 |
% \begin{macro}{\oenodeIfc} |
| 17947 |
% The node of the interface no. \#1 of component \#2. Only integer |
| 17948 |
% number, N or C are allowed. You should always use this e.g. to |
| 17949 |
% access coupler nodes. |
| 17950 |
% \begin{macrocode} |
| 17951 |
\def\oenodeIfc#1#2{% |
| 17952 |
\ifnum9<1#1 % |
| 17953 |
\oenode{#1}{#2}% |
| 17954 |
\else\ifx#1N % |
| 17955 |
\oenode{#1}{#2}% |
| 17956 |
\else\ifx#1C % |
| 17957 |
\oenode{#1}{#2}% |
| 17958 |
\else |
| 17959 |
\PackageWarning{pst-optexp}{% |
| 17960 |
\string\oenodeIfc\space node argument must be\MessageBreak |
| 17961 |
integer, 'N', or 'C'.} |
| 17962 |
\fi\fi\fi |
| 17963 |
}% |
| 17964 |
% \end{macrocode} |
| 17965 |
% \end{macro} |
| 17966 |
% \begin{macro}{\oenodeBeam} |
| 17967 |
% The end point of the last beam path which was saved with number \#1 |
| 17968 |
% (default is 1). |
| 17969 |
% \begin{macrocode} |
| 17970 |
\def\oenodeBeam#1{% |
| 17971 |
\POE@str@basicname@prefix\POE@str@basicname@default Beam% |
| 17972 |
\ifx\\#1\\1\else#1\fi |
| 17973 |
}% |
| 17974 |
% \end{macrocode} |
| 17975 |
% \end{macro} |
| 17976 |
% \begin{macro}{\oenodeBeamUp} |
| 17977 |
% The upper end point of the last wide beam path saved with number \#1 |
| 17978 |
% (default is 1). |
| 17979 |
% \begin{macrocode} |
| 17980 |
\def\oenodeBeamUp#1{% |
| 17981 |
\POE@str@basicname@prefix\POE@str@basicname@default BeamUp% |
| 17982 |
\ifx\\#1\\1\else#1\fi |
| 17983 |
}% |
| 17984 |
% \end{macrocode} |
| 17985 |
% \end{macro} |
| 17986 |
% \begin{macro}{\oenodeBeamLow} |
| 17987 |
% The lower end point of the last wide beam path saved with number \#1 |
| 17988 |
% (default is 1). |
| 17989 |
% \begin{macrocode} |
| 17990 |
\def\oenodeBeamLow#1{% |
| 17991 |
\POE@str@basicname@prefix\POE@str@basicname@default BeamLow% |
| 17992 |
\ifx\\#1\\1\else#1\fi |
| 17993 |
}% |
| 17994 |
% \end{macrocode} |
| 17995 |
% \end{macro} |
| 17996 |
% |
| 17997 |
% \begin{macro}{\POE@beamvec} |
| 17998 |
% Generic macro to load the Postscript coordinates of the direction |
| 17999 |
% vector of the last beam segment (upper, lower, single, specified |
| 18000 |
% with \#1) saved with number \#2. |
| 18001 |
% \begin{macrocode} |
| 18002 |
\def\POE@beamvec#1#2{% |
| 18003 |
\POE@dict{% |
| 18004 |
/prevVec#1\ifx\\#2\\1\else#2\fi\space dup |
| 18005 |
currentdict exch known { load exec }{ pop 0 0 } ifelse |
| 18006 |
}% |
| 18007 |
}% |
| 18008 |
\def\oeBeamVec#1{\POE@beamvec{}{#1}}% |
| 18009 |
\def\oeBeamVecUp#1{\POE@beamvec{Up}{#1}}% |
| 18010 |
\def\oeBeamVecLow#1{\POE@beamvec{Low}{#1}}% |
| 18011 |
\def\oeBeamVecMedian#1{% |
| 18012 |
\oeBeamVecUp{#1} \oeBeamVecLow{#1} \POE@dict{VecAdd NormalizeVec} |
| 18013 |
}% |
| 18014 |
\def\oeBeamCenter#1{% |
| 18015 |
\psGetNodeCenter{\oenodeBeamUp{#1}} \oenodeBeamUp{#1}.x \oenodeBeamUp{#1}.y |
| 18016 |
\psGetNodeCenter{\oenodeBeamLow{#1}} \oenodeBeamLow{#1}.x \oenodeBeamLow{#1}.y |
| 18017 |
\POE@dict{VecAdd 0.5 VecScale} |
| 18018 |
}% |
| 18019 |
% \end{macrocode} |
| 18020 |
% \end{macro} |
| 18021 |
% |
| 18022 |
% \section{Components} |
| 18023 |
% |
| 18024 |
% \begin{macro}{\POE@useifccode} |
| 18025 |
% \begin{macro}{\begin@CompIfc} |
| 18026 |
% \begin{macrocode} |
| 18027 |
\def\POE@useifccode{% |
| 18028 |
\POE@Verb{% |
| 18029 |
[ \pst@code |
| 18030 |
\ifPOE@allowbeaminside true \else false \fi |
| 18031 |
\ifPOE@forcebeaminside true \else false \fi |
| 18032 |
(\oenode{}{}) {\tx@ScreenCoor} |
| 18033 |
NewOptexpComp |
| 18034 |
}% |
| 18035 |
\gdef\pst@code{}% |
| 18036 |
}% |
| 18037 |
\def\begin@CompIfc{% |
| 18038 |
\begingroup |
| 18039 |
}% |
| 18040 |
\def\end@CompIfc{% |
| 18041 |
\addto@pscode{ false }% |
| 18042 |
\POE@useifccode |
| 18043 |
\endgroup |
| 18044 |
\ignorespaces |
| 18045 |
}% |
| 18046 |
\def\end@AmbCompIfc{% |
| 18047 |
\addto@pscode{ true }% |
| 18048 |
\POE@useifccode |
| 18049 |
\endgroup |
| 18050 |
\ignorespaces |
| 18051 |
}% |
| 18052 |
% \end{macrocode} |
| 18053 |
% \end{macro} |
| 18054 |
% \end{macro} |
| 18055 |
% \begin{macro}{\newOptexpComp@} |
| 18056 |
% \begin{macrocode} |
| 18057 |
\def\newOptexpComp@#1#2{% |
| 18058 |
\POE@Verb{% |
| 18059 |
\tx@NodeScale |
| 18060 |
[ #1 #2 |
| 18061 |
\ifPOE@allowbeaminside true \else false \fi |
| 18062 |
\ifPOE@forcebeaminside true \else false \fi |
| 18063 |
(\oenode{}{}) {\tx@ScreenCoor} |
| 18064 |
NewOptexpComp |
| 18065 |
}% |
| 18066 |
\ignorespaces}% |
| 18067 |
% \end{macrocode} |
| 18068 |
% \end{macro} |
| 18069 |
% |
| 18070 |
% \begin{macro}{\newOptexpComp} |
| 18071 |
% \begin{macrocode} |
| 18072 |
\def\newOptexpComp#1{% |
| 18073 |
\newOptexpComp@{#1}{false}% |
| 18074 |
\ignorespaces}% |
| 18075 |
% \end{macrocode} |
| 18076 |
% \end{macro} |
| 18077 |
% |
| 18078 |
% \begin{macro}{\newOptexpCompAmb} |
| 18079 |
% \begin{macrocode} |
| 18080 |
\def\newOptexpCompAmb#1{% |
| 18081 |
\newOptexpComp@{#1}{true}% |
| 18082 |
\ignorespaces}% |
| 18083 |
% \end{macrocode} |
| 18084 |
% \end{macro} |
| 18085 |
% |
| 18086 |
% \begin{macro}{\newOptexpFiberComp} |
| 18087 |
% \begin{macrocode} |
| 18088 |
\def\newOptexpFiberComp#1{% |
| 18089 |
\POE@Verb{% |
| 18090 |
\tx@NodeScale |
| 18091 |
[ #1 (\oenode{}{}) {\tx@ScreenCoor} |
| 18092 |
NewOptexpFiberComp |
| 18093 |
}% |
| 18094 |
\ignorespaces}% |
| 18095 |
% \end{macrocode} |
| 18096 |
% \end{macro} |
| 18097 |
% |
| 18098 |
% \begin{macro}{newOptexpElecComp} |
| 18099 |
% This may change at later times. |
| 18100 |
% \begin{macrocode} |
| 18101 |
\let\newOptexpElecComp\newOptexpFiberComp |
| 18102 |
% \end{macrocode} |
| 18103 |
% \end{macro} |
| 18104 |
% |
| 18105 |
% \begin{macro}{\optplane} |
| 18106 |
% Define an invisible plane which is used only for ray tracing. The first node |
| 18107 |
% is the origin, the second one is the difference vector. |
| 18108 |
% \begin{macrocode} |
| 18109 |
\def\optplane{% |
| 18110 |
\@ifnextchar[%] |
| 18111 |
{\optplane@i}{\optplane@i[]}% |
| 18112 |
}% |
| 18113 |
\def\optplane@i[#1](#2){% |
| 18114 |
\pst@getcoor{#2}\POE@tempa |
| 18115 |
% \end{macrocode} |
| 18116 |
% Set the height to 0 to circumvent problems with the NA beeing too low |
| 18117 |
% \begin{macrocode} |
| 18118 |
\optplate[#1, plateheight=0, linestyle=none]% |
| 18119 |
(! \POE@tempa exch 1 sub exch \tx@UserCoor)% |
| 18120 |
(! \POE@tempa exch 1 add exch \tx@UserCoor)% |
| 18121 |
\ignorespaces}% |
| 18122 |
% \end{macrocode} |
| 18123 |
% \end{macro} |
| 18124 |
% |
| 18125 |
% \begin{macro}{\POE@SaveBeamParameters} |
| 18126 |
% Save the current beam parameters. This is used to be able to set a |
| 18127 |
% source beam with the usual beam parameters. |
| 18128 |
% \begin{macrocode} |
| 18129 |
\def\POE@SaveBeamParameters{% |
| 18130 |
\let\POE@tempA\POE@key@beamangle |
| 18131 |
\let\POE@tempB\POE@key@beamdiv |
| 18132 |
\let\POE@tempC\POE@key@beamwidth |
| 18133 |
\let\POE@tempD\POE@key@beamalign |
| 18134 |
\let\POE@key@beamangle\relax |
| 18135 |
\let\POE@key@beamdiv\relax |
| 18136 |
\let\POE@key@beamwidth\relax |
| 18137 |
\let\POE@key@beamalign\relax |
| 18138 |
}% |
| 18139 |
% \end{macrocode} |
| 18140 |
% \end{macro} |
| 18141 |
% |
| 18142 |
% \begin{macro}{\POE@SetSourceAndRestoreBeamParameters} |
| 18143 |
% \begin{macrocode} |
| 18144 |
\def\POE@SetSourceAndRestoreBeamParameters{% |
| 18145 |
\let\POE@key@sourcebeamangle\POE@key@beamangle |
| 18146 |
\let\POE@key@sourcebeamdiv\POE@key@beamdiv |
| 18147 |
\let\POE@key@sourcebeamwidth\POE@key@beamwidth |
| 18148 |
\let\POE@key@sourcebeamalign\POE@key@beamalign |
| 18149 |
\let\POE@key@beamangle\POE@tempA |
| 18150 |
\let\POE@key@beamdiv\POE@tempB |
| 18151 |
\let\POE@key@beamwidth\POE@tempC |
| 18152 |
\let\POE@key@beamalign\POE@tempD |
| 18153 |
}% |
| 18154 |
% \end{macrocode} |
| 18155 |
% \end{macro} |
| 18156 |
% |
| 18157 |
% \begin{macro}{\POE@HandleSourceBeam} |
| 18158 |
% Load beam properties from the first component on the stack, if it is |
| 18159 |
% an optical source. Also handle the beamalign=firstcomp case, since |
| 18160 |
% this also depends on the first component. |
| 18161 |
% \begin{macrocode} |
| 18162 |
\def\POE@HandleSourceBeam{% |
| 18163 |
\addto@pscode{% |
| 18164 |
counttomark 0 eq not { |
| 18165 |
dup cvn load dup /source known { |
| 18166 |
/source get { def } forall |
| 18167 |
}{ pop } ifelse |
| 18168 |
} if |
| 18169 |
% \end{macrocode} |
| 18170 |
% Handle the beamalign=firstcomp case. Calculate the angle of the first |
| 18171 |
% component's reference line and set the beamalign parameter to |
| 18172 |
% absolute. |
| 18173 |
% \begin{macrocode} |
| 18174 |
beamalign firstcomp eq { |
| 18175 |
dup dup (Center) NodeName tx@NodeDict exch known not { |
| 18176 |
% \end{macrocode} |
| 18177 |
% If we have no node called \opt{\ldots Center}, the first object isn't |
| 18178 |
% a component, but a node. Switch to relative alignment. |
| 18179 |
% \begin{macrocode} |
| 18180 |
pop /beamalign relative def |
| 18181 |
} { |
| 18182 |
RelConnAngle@tref exch atan /beamangle exch def |
| 18183 |
/beamalign absolute def |
| 18184 |
} ifelse |
| 18185 |
} if |
| 18186 |
}% |
| 18187 |
}% |
| 18188 |
% \end{macrocode} |
| 18189 |
% \end{macro} |
| 18190 |
% |
| 18191 |
% \begin{macro}{\begin@OptexpObj} |
| 18192 |
% \begin{macrocode} |
| 18193 |
\def\begin@OptexpObj{% |
| 18194 |
\global\advance\POE@cnt by 1 |
| 18195 |
\addbefore@par{compname={}}% |
| 18196 |
\pst@killglue |
| 18197 |
\begingroup |
| 18198 |
\POE@insideobjtrue |
| 18199 |
\POE@Verb{InitOptexpComp }% |
| 18200 |
\POE@SaveBeamParameters |
| 18201 |
\use@par |
| 18202 |
\POE@SetSourceAndRestoreBeamParameters |
| 18203 |
% \end{macrocode} |
| 18204 |
% The \opt{compshift} refers to the $y$-direction, shifting in $x$-direction |
| 18205 |
% is done by \opt{abspos} or \opt{position} |
| 18206 |
% \begin{macrocode} |
| 18207 |
\let\POE@key@comp@Yshift\POE@key@compshift% |
| 18208 |
\let\POE@key@comp@Xshift\POE@key@compoffset% |
| 18209 |
\edef\POE@refnodeA{\oenodeRefA{}}% |
| 18210 |
\edef\POE@refnodeB{\oenodeRefB{}}% |
| 18211 |
\edef\POE@trefnodeA{\oenodeTrefA{}}% |
| 18212 |
\edef\POE@trefnodeB{\oenodeTrefB{}}% |
| 18213 |
\def\POE@transformnodes{% |
| 18214 |
\POE@transformnode{\oenodeRefA{}}{\oenodeTrefA{}}% |
| 18215 |
\POE@transformnode{\oenodeRefB{}}{\oenodeTrefB{}}% |
| 18216 |
}% |
| 18217 |
\def\tx@Line{Line }% |
| 18218 |
}% |
| 18219 |
% \end{macrocode} |
| 18220 |
% \end{macro} |
| 18221 |
% |
| 18222 |
% \begin{macro}{\begin@OptexpTripole} |
| 18223 |
% \begin{macrocode} |
| 18224 |
\let\POE@disablepos\relax |
| 18225 |
\def\begin@OptexpTripole{% |
| 18226 |
\begin@OptexpObj |
| 18227 |
% \end{macrocode} |
| 18228 |
% for multipoles the default shifting is in $x$-direction |
| 18229 |
% \begin{macrocode} |
| 18230 |
\def\POE@key@comp@Xshift{\POE@key@compshift\space neg }% |
| 18231 |
\let\POE@key@comp@Yshift\POE@key@compoffset |
| 18232 |
% \end{macrocode} |
| 18233 |
% The positioning parameters are disabled, because \opt{compshift} does the job for tripoles. |
| 18234 |
% \begin{macrocode} |
| 18235 |
\def\POE@disablepos{% |
| 18236 |
\let\POE@key@abspos\@empty |
| 18237 |
\let\POE@key@position\@empty |
| 18238 |
}% |
| 18239 |
\POE@positionrefnodes |
| 18240 |
}% |
| 18241 |
% \end{macrocode} |
| 18242 |
% \end{macro} |
| 18243 |
% |
| 18244 |
% \begin{macro}{\POE@positionrefnodes} |
| 18245 |
% \begin{macrocode} |
| 18246 |
\def\POE@positionrefnodes{% |
| 18247 |
\edef\POE@refnodeA{\oenode@RefA{}}% |
| 18248 |
\edef\POE@refnodeB{\oenode@RefB{}}% |
| 18249 |
\edef\POE@trefnodeA{\oenode@TrefA{}}% |
| 18250 |
\edef\POE@trefnodeB{\oenode@TrefB{}}% |
| 18251 |
\def\POE@transformnodes{% |
| 18252 |
\POE@transformnode{\oenodeRefA{}}{\oenodeTrefA{}}% |
| 18253 |
\POE@transformnode{\oenodeRefB{}}{\oenodeTrefB{}}% |
| 18254 |
\POE@transformnode{\oenode@RefA{}}{\oenode@TrefA{}}% |
| 18255 |
\POE@transformnode{\oenode@RefB{}}{\oenode@TrefB{}}% |
| 18256 |
}% |
| 18257 |
}% |
| 18258 |
% \end{macrocode} |
| 18259 |
% \end{macro} |
| 18260 |
% |
| 18261 |
% \begin{macro}{\POE@unsetbeamparameters} |
| 18262 |
% Unset some beam parameters which might be used by \cs{optsource}. |
| 18263 |
% \begin{macrocode} |
| 18264 |
\def\POE@unsetbeamparameters{% |
| 18265 |
\let\POE@key@beamangle\relax |
| 18266 |
\let\POE@key@beamdiv\relax |
| 18267 |
\let\POE@key@beamwidth\relax |
| 18268 |
}% |
| 18269 |
% \end{macrocode} |
| 18270 |
% \end{macro} |
| 18271 |
% |
| 18272 |
% \begin{macro}{\end@OptexpObj} |
| 18273 |
% \begin{macrocode} |
| 18274 |
\def\end@OptexpObj{% |
| 18275 |
\ifnum9<1\POE@key@compname\else |
| 18276 |
\POE@Verb{ |
| 18277 |
(\oenode{}{\POE@key@compname}) |
| 18278 |
(\oenode{}{\the\POE@cnt}) CompAlias }% |
| 18279 |
\fi |
| 18280 |
\endgroup |
| 18281 |
\ignorespaces% |
| 18282 |
}% |
| 18283 |
% \end{macrocode} |
| 18284 |
% \end{macro} |
| 18285 |
% |
| 18286 |
% \begin{macro}{\end@OptexpDipole} |
| 18287 |
% \begin{macrocode} |
| 18288 |
\let\end@OptexpDipole\end@OptexpObj |
| 18289 |
% \end{macrocode} |
| 18290 |
% \end{macro} |
| 18291 |
% |
| 18292 |
% \begin{macro}{\end@OptexpTripole} |
| 18293 |
% \begin{macrocode} |
| 18294 |
\let\end@OptexpTripole\end@OptexpObj |
| 18295 |
% \end{macrocode} |
| 18296 |
% \end{macro} |
| 18297 |
% |
| 18298 |
% \begin{macro}{\addafter@par} |
| 18299 |
% Analog to \cs{addbefore@par} from pstricks.tex, but inserts new options at |
| 18300 |
% the end of the current token register. This can be useful to preset options |
| 18301 |
% that are not allowed to be changed by the user. |
| 18302 |
% \begin{macrocode} |
| 18303 |
\def\addafter@par#1{% |
| 18304 |
\ifx\pst@par\@empty |
| 18305 |
\def\pst@par{#1}% |
| 18306 |
\else |
| 18307 |
\toks@{#1}% |
| 18308 |
\pst@toks\expandafter{\pst@par}% |
| 18309 |
\edef\pst@par{\the\pst@toks,\the\toks@}% |
| 18310 |
\fi% |
| 18311 |
}% |
| 18312 |
% \end{macrocode} |
| 18313 |
% \end{macro} |
| 18314 |
% |
| 18315 |
% \begin{macrocode} |
| 18316 |
\def\POE@clwh{CLW \pst@number\psxunit 2 mul div }% |
| 18317 |
\def\POE@clw{CLW \pst@number\psxunit div }% |
| 18318 |
\let\POE@restorerefnodes\relax |
| 18319 |
% \end{macrocode} |
| 18320 |
% |
| 18321 |
% New high-level macros |
| 18322 |
% 1) Allow a compressed notation of all provided elements, as most of the organizing code |
| 18323 |
% is mostly equal. |
| 18324 |
% |
| 18325 |
% 2) Provide a rather easy-to-use interface for the user to allow new user-defined elements |
| 18326 |
% |
| 18327 |
% \begin{macro}{\newOptexpDipole} |
| 18328 |
% \begin{macrocode} |
| 18329 |
\def\newOptexpDipole{% |
| 18330 |
\@ifnextchar[%] |
| 18331 |
{\POE@newdipole}{\POE@newdipole[]}% |
| 18332 |
}% |
| 18333 |
% \end{macrocode} |
| 18334 |
% \end{macro} |
| 18335 |
% |
| 18336 |
% \begin{macro}{\newOptexpTripole} |
| 18337 |
% \begin{macrocode} |
| 18338 |
\def\newOptexpTripole{% |
| 18339 |
\@ifnextchar[%] |
| 18340 |
{\POE@newtripole}{\POE@newtripole[]}% |
| 18341 |
}% |
| 18342 |
% \end{macrocode} |
| 18343 |
% \end{macro} |
| 18344 |
% \begin{macro}{\newOptexpFiberDipole} |
| 18345 |
% \begin{macrocode} |
| 18346 |
\def\newOptexpFiberDipole{% |
| 18347 |
\@ifnextchar[%] |
| 18348 |
{\POE@newfiberdipole}{\POE@newfiberdipole[]}% |
| 18349 |
}% |
| 18350 |
% \end{macrocode} |
| 18351 |
% \end{macro} |
| 18352 |
% |
| 18353 |
% \begin{macro}{\POE@newdipole} |
| 18354 |
% \begin{macrocode} |
| 18355 |
\def\POE@newdipole[#1]#2{% |
| 18356 |
\@ifnextchar\bgroup |
| 18357 |
{\POE@newdipole@i[#1]{#2}}{\POE@newdipole@i[#1]{#2}{}}% |
| 18358 |
}% |
| 18359 |
% \end{macrocode} |
| 18360 |
% \end{macro} |
| 18361 |
% \begin{macro}{\POE@newdipole@i} |
| 18362 |
% \begin{macrocode} |
| 18363 |
\def\POE@newdipole@i[#1]#2#3{% |
| 18364 |
\@ifundefined{#2@i}{% |
| 18365 |
\@namedef{#2}{\pst@object{#2}}% |
| 18366 |
\expandafter\def\csname #2@i\endcsname(##1)(##2){% |
| 18367 |
\@ifnextchar\bgroup% |
| 18368 |
{\@nameuse{#2@ii}(##1)(##2)}% |
| 18369 |
{\@nameuse{#2@ii}(##1)(##2){}}% |
| 18370 |
}% |
| 18371 |
\expandafter\def\csname #2@ii\endcsname(##1)(##2)##3{% |
| 18372 |
\addbefore@par{#3}% |
| 18373 |
\addafter@par{#1}% |
| 18374 |
\begin@OptexpObj |
| 18375 |
\ifPOE@backlayer |
| 18376 |
\POE@regNodes{##1}{##2} |
| 18377 |
\fi |
| 18378 |
\POE@drawcomponent{#2}{##3} |
| 18379 |
\ifPOE@backlayer |
| 18380 |
\POE@Verb{ (1) (N) (\oenode{}{}) CorrectDipoleIfc }% |
| 18381 |
\@ifundefined{#2@conn}{\POE@InternalConn}{\@nameuse{#2@conn}}% |
| 18382 |
\fi |
| 18383 |
\end@OptexpDipole |
| 18384 |
}% |
| 18385 |
\@ifundefined{#2@nodes}{\expandafter\def\csname #2@nodes\endcsname{\POE@dipole@nodes}}{}% |
| 18386 |
}{% |
| 18387 |
\PackageError{pst-optexp}{% |
| 18388 |
dipole component '#2' already defined}% |
| 18389 |
}% |
| 18390 |
\ignorespaces}% |
| 18391 |
% \end{macrocode} |
| 18392 |
% \end{macro} |
| 18393 |
% |
| 18394 |
% \begin{macro}{\POE@newfiberdipole} |
| 18395 |
% \begin{macrocode} |
| 18396 |
\def\POE@newfiberdipole[#1]#2{% |
| 18397 |
\@ifnextchar\bgroup |
| 18398 |
{\POE@newfiberdipole@i[#1]{#2}}{\POE@newfiberdipole@i[#1]{#2}{}}% |
| 18399 |
}% |
| 18400 |
% \end{macrocode} |
| 18401 |
% \end{macro} |
| 18402 |
% \begin{macro}{\POE@newfiberdipole@i} |
| 18403 |
% \begin{macrocode} |
| 18404 |
\def\POE@newfiberdipole@i[#1]#2#3{% |
| 18405 |
\@ifundefined{#2@i}{% |
| 18406 |
\@namedef{#2}{\pst@object{#2}}% |
| 18407 |
\expandafter\def\csname #2@i\endcsname(##1)(##2){% |
| 18408 |
\@ifnextchar\bgroup% |
| 18409 |
{\@nameuse{#2@ii}(##1)(##2)}% |
| 18410 |
{\@nameuse{#2@ii}(##1)(##2){}}% |
| 18411 |
}% |
| 18412 |
\expandafter\def\csname #2@ii\endcsname(##1)(##2)##3{% |
| 18413 |
\addbefore@par{#3}% |
| 18414 |
\addafter@par{#1}% |
| 18415 |
\begin@OptexpObj |
| 18416 |
\ifPOE@backlayer |
| 18417 |
\POE@regNodes{##1}{##2} |
| 18418 |
\fi |
| 18419 |
\POE@drawcomponent{#2}{##3} |
| 18420 |
\ifPOE@backlayer |
| 18421 |
\POE@Verb{ (1) (N) (\oenode{}{}) CorrectDipoleIfc }% |
| 18422 |
\POE@PresetFiberConn |
| 18423 |
\fi |
| 18424 |
\end@OptexpDipole |
| 18425 |
}% |
| 18426 |
\@ifundefined{#2@nodes}{\expandafter\def\csname #2@nodes\endcsname{\POE@fiberdipole@nodes}}{}% |
| 18427 |
}{% |
| 18428 |
\PackageError{pst-optexp}{% |
| 18429 |
fiber dipole object '#2' already defined}% |
| 18430 |
}% |
| 18431 |
\ignorespaces}% |
| 18432 |
% \end{macrocode} |
| 18433 |
% \end{macro} |
| 18434 |
% |
| 18435 |
% \begin{macro}{\POE@newtripole} |
| 18436 |
% \begin{macrocode} |
| 18437 |
\def\POE@newtripole[#1]#2{% |
| 18438 |
\@ifnextchar\bgroup |
| 18439 |
{\POE@newtripole@i[#1]{#2}}{\POE@newtripole@i[#1]{#2}{}}% |
| 18440 |
}% |
| 18441 |
% \end{macrocode} |
| 18442 |
% \end{macro} |
| 18443 |
% \begin{macro}{\POE@newtripole@i} |
| 18444 |
% \begin{macrocode} |
| 18445 |
\def\POE@newtripole@i[#1]#2#3{% |
| 18446 |
\@ifundefined{#2@i}{% |
| 18447 |
\@namedef{#2}{\pst@object{#2}}% |
| 18448 |
\expandafter\def\csname #2@i\endcsname(##1)(##2)(##3){% |
| 18449 |
\@ifnextchar\bgroup{\@nameuse{#2@ii}(##1)(##2)(##3)}% |
| 18450 |
{\@nameuse{#2@ii}(##1)(##2)(##3){}}% |
| 18451 |
}% |
| 18452 |
\expandafter\def\csname #2@ii\endcsname(##1)(##2)(##3)##4{% |
| 18453 |
\addbefore@par{#3}% |
| 18454 |
\addafter@par{ref@angle=0,#1}% |
| 18455 |
\begin@OptexpTripole |
| 18456 |
\ifPOE@backlayer |
| 18457 |
\POE@calcNodes{##1}{##2}{##3}% |
| 18458 |
\POE@regNodes{##1}{##3}% |
| 18459 |
\fi |
| 18460 |
\POE@drawcomponent{#2}{##4} |
| 18461 |
\ifPOE@backlayer |
| 18462 |
\POE@InternalConn |
| 18463 |
\fi |
| 18464 |
\end@OptexpTripole |
| 18465 |
}% |
| 18466 |
\@ifundefined{#2@nodes}{\expandafter\def\csname #2@nodes\endcsname{\POE@tripole@nodes}}{}% |
| 18467 |
}{% |
| 18468 |
\PackageError{pst-optexp}{% |
| 18469 |
tripole object '#2' already defined}% |
| 18470 |
}% |
| 18471 |
\ignorespaces}% |
| 18472 |
% \end{macrocode} |
| 18473 |
% \end{macro} |
| 18474 |
% |
| 18475 |
% \begin{macro}{\optaom} |
| 18476 |
% \begin{macrocode} |
| 18477 |
\def\optaom{\pst@object{optaom}}% |
| 18478 |
\def\optaom@i(#1)(#2)(#3){% |
| 18479 |
\@ifnextchar\bgroup |
| 18480 |
{\optaom@ii(#1)(#2)(#3)}% |
| 18481 |
{\optaom@ii(#1)(#2)(#3){}}% |
| 18482 |
}% |
| 18483 |
\def\optaom@ii(#1)(#2)(#3)#4{% |
| 18484 |
\addafter@par{ref@angle=180}% |
| 18485 |
\begin@OptexpTripole |
| 18486 |
\ifPOE@backlayer |
| 18487 |
\ifx\POE@key@abspos\@empty |
| 18488 |
\ifx\POE@key@position\@empty |
| 18489 |
\psLNode(#1)(#2){0.5}{\oenode{Tmp}{}} |
| 18490 |
\else |
| 18491 |
\psLNode(#1)(#2){\POE@key@position}{\oenode{Tmp}{}} |
| 18492 |
\fi |
| 18493 |
\else |
| 18494 |
\psLDNode(#1)(#2){\POE@key@abspos}{\oenode{Tmp}{}} |
| 18495 |
\fi |
| 18496 |
\POE@calcNodes{#1}{\oenode{Tmp}{}}{#3}% |
| 18497 |
\POE@regNodes{#1}{#3} |
| 18498 |
\fi |
| 18499 |
\POE@drawcomponent{optaom}{#4} |
| 18500 |
\ifPOE@backlayer |
| 18501 |
\POE@InternalConn |
| 18502 |
\fi |
| 18503 |
\end@OptexpTripole |
| 18504 |
\ignorespaces}% |
| 18505 |
% \end{macrocode} |
| 18506 |
% \end{macro} |
| 18507 |
% |
| 18508 |
% \begin{macro}{\optcoupler} |
| 18509 |
% \begin{macrocode} |
| 18510 |
\def\optcoupler{\pst@object{optcoupler}}% |
| 18511 |
\def\optcoupler@i(#1)(#2){% |
| 18512 |
\@ifnextchar(%) |
| 18513 |
{\optcoupler@ii(#1)(#2)}% |
| 18514 |
{\optcoupler@ii(#1)(#1)(#2)(#2)}% |
| 18515 |
}% |
| 18516 |
\def\optcoupler@ii(#1)(#2)(#3)(#4){% |
| 18517 |
\@ifnextchar\bgroup% |
| 18518 |
{\optcoupler@iii(#1)(#2)(#3)(#4)}% |
| 18519 |
{\optcoupler@iii(#1)(#2)(#3)(#4){}}% |
| 18520 |
}% |
| 18521 |
\def\optcoupler@iii(#1)(#2)(#3)(#4)#5{% |
| 18522 |
\begin@OptexpObj |
| 18523 |
\ifPOE@backlayer |
| 18524 |
\ifx\POE@key@coupleralign\POE@str@top |
| 18525 |
\pnode(#1){\oenodeRefA{}} |
| 18526 |
\pnode(#3){\oenodeRefB{}} |
| 18527 |
\else\ifx\POE@key@coupleralign\POE@str@bottom |
| 18528 |
\pnode(#2){\oenodeRefA{}} |
| 18529 |
\pnode(#4){\oenodeRefB{}} |
| 18530 |
\else |
| 18531 |
\pst@getcoor{#1}\POE@tempa% |
| 18532 |
\pst@getcoor{#2}\POE@tempb% |
| 18533 |
\pnode(!\POE@tempa \POE@tempb |
| 18534 |
\POE@dict{VecAdd 0.5 VecScale} |
| 18535 |
\tx@UserCoor){\oenodeRefA{}} |
| 18536 |
\pst@getcoor{#3}\POE@tempa% |
| 18537 |
\pst@getcoor{#4}\POE@tempb% |
| 18538 |
\pnode(!\POE@tempa \POE@tempb |
| 18539 |
\POE@dict{VecAdd 0.5 VecScale} |
| 18540 |
\tx@UserCoor){\oenodeRefB{}} |
| 18541 |
\fi\fi |
| 18542 |
\fi |
| 18543 |
\POE@drawcomponent{optcoupler}{#5} |
| 18544 |
\ifPOE@backlayer |
| 18545 |
\POE@Verb{% |
| 18546 |
(1) (3) (\oenode{}{}) CorrectDipoleIfc |
| 18547 |
(2) (4) (\oenode{}{}) CorrectDipoleIfc |
| 18548 |
}% |
| 18549 |
\ifPOE@fiberpresetin@ |
| 18550 |
\ifPOE@fiberpresetin@top |
| 18551 |
\drawfiber@{FiberIn1}[stopnode=1](#1){} |
| 18552 |
\fi |
| 18553 |
\ifPOE@fiberpresetin@bottom |
| 18554 |
\drawfiber@{FiberIn2}[stopnode=2](#2){} |
| 18555 |
\fi |
| 18556 |
\fi |
| 18557 |
\ifPOE@fiberpresetout@ |
| 18558 |
\ifPOE@fiberpresetout@top |
| 18559 |
\drawfiber@{FiberOut1}[startnode=3]{}(#3) |
| 18560 |
\fi |
| 18561 |
\ifPOE@fiberpresetout@bottom |
| 18562 |
\drawfiber@{FiberOut2}[startnode=N]{}(#4) |
| 18563 |
\fi |
| 18564 |
\fi |
| 18565 |
\fi |
| 18566 |
\end@OptexpObj |
| 18567 |
}% |
| 18568 |
% \end{macrocode} |
| 18569 |
% \end{macro} |
| 18570 |
% |
| 18571 |
% |
| 18572 |
% \begin{macro}{\wdmsplitter} |
| 18573 |
% \begin{macrocode} |
| 18574 |
\def\wdmsplitter{\pst@object{wdmsplitter}}% |
| 18575 |
\def\wdmsplitter@i{% |
| 18576 |
\def\my@aftercoors{\wdmsplitter@ii}% |
| 18577 |
\POE@couplernodecount=0\relax |
| 18578 |
\def\coupler@coors{}% |
| 18579 |
\coupler@@getcoors |
| 18580 |
} |
| 18581 |
\def\wdmsplitter@ii{% |
| 18582 |
\@ifnextchar\bgroup% |
| 18583 |
{\wdmsplitter@iii}% |
| 18584 |
{\wdmsplitter@iii{}}% |
| 18585 |
}% |
| 18586 |
\def\wdmsplitter@iii#1{% |
| 18587 |
\ifnum\POE@couplernodecount>1\else |
| 18588 |
\PackageError{pst-optexp}% |
| 18589 |
{A wdmsplitter expects at least two nodes, one input and one output node}% |
| 18590 |
\fi |
| 18591 |
\begin@OptexpObj |
| 18592 |
\ifPOE@backlayer |
| 18593 |
% \end{macrocode} |
| 18594 |
% Use first coordinate pair as RefA |
| 18595 |
% \begin{macrocode} |
| 18596 |
\pnode(! [ \coupler@coors 1 \POE@dict{GetCoordinatePair} \tx@UserCoor){\oenodeRefA{}} |
| 18597 |
\ifx\POE@key@coupleralign\POE@str@top |
| 18598 |
% \end{macrocode} |
| 18599 |
% For top alignment, use first output coordinate pair, i.e. second coordinate pair as RefB |
| 18600 |
% \begin{macrocode} |
| 18601 |
\pnode(! [ \coupler@coors 2 \POE@dict{GetCoordinatePair} \tx@UserCoor){\oenodeRefB{}} |
| 18602 |
\else\ifx\POE@key@coupleralign\POE@str@bottom |
| 18603 |
% \end{macrocode} |
| 18604 |
% For bottom alignment, use last output coordinate pair |
| 18605 |
% \begin{macrocode} |
| 18606 |
\pnode(! [ \coupler@coors counttomark 2 idiv \POE@dict{GetCoordinatePair} \tx@UserCoor){\oenodeRefB{}} |
| 18607 |
\else |
| 18608 |
% \end{macrocode} |
| 18609 |
% Use median of all output coordinate pairs as RefB |
| 18610 |
% \begin{macrocode} |
| 18611 |
\pnode(! [ \coupler@coors |
| 18612 |
% \end{macrocode} |
| 18613 |
% remove input node from stack |
| 18614 |
% \begin{macrocode} |
| 18615 |
pop pop |
| 18616 |
% \end{macrocode} |
| 18617 |
% count number of output coordinate pair, keep that number and save it behind the mark |
| 18618 |
% \begin{macrocode} |
| 18619 |
counttomark 2 idiv dup counttomark 1 add 1 roll |
| 18620 |
1 sub { \POE@dict{VecAdd} } repeat |
| 18621 |
% \end{macrocode} |
| 18622 |
% divide by number of output coordinate pairs and remove mark |
| 18623 |
% \begin{macrocode} |
| 18624 |
4 -1 roll 1 exch div \POE@dict{VecScale} 3 -1 roll pop \tx@UserCoor){\oenodeRefB{}} |
| 18625 |
\fi\fi |
| 18626 |
\fi |
| 18627 |
\POE@drawcomponent{wdmsplitter}{#1} |
| 18628 |
\ifPOE@backlayer |
| 18629 |
\POE@Verb{% |
| 18630 |
2 1 \the\POE@couplernodecount\space |
| 18631 |
{ |
| 18632 |
inttostr (1) exch (\oenode{}{}) CorrectDipoleIfc |
| 18633 |
} for |
| 18634 |
}% |
| 18635 |
\ifPOE@fiberpresetin@ |
| 18636 |
\drawfiber@{FiberIn}[stopnode=1](! [ \coupler@coors 1 \POE@dict{GetCoordinatePair} \tx@UserCoor){} |
| 18637 |
\fi |
| 18638 |
\ifPOE@fiberpresetout@ |
| 18639 |
\ifPOE@fiberpresetout@top |
| 18640 |
\drawfiber@{FiberOut1}[startnode=2]{}(! [ \coupler@coors 2 \POE@dict{GetCoordinatePair} \tx@UserCoor) |
| 18641 |
\fi |
| 18642 |
\ifPOE@fiberpresetout@bottom |
| 18643 |
\drawfiber@{FiberOut2}[startnode=N]{}(! [ \coupler@coors \the\POE@couplernodecount\space \POE@dict{GetCoordinatePair} \tx@UserCoor) |
| 18644 |
\fi |
| 18645 |
\fi |
| 18646 |
% \end{macrocode} |
| 18647 |
% If top and bottom fibers are drawn, we must also draw all other output fibers |
| 18648 |
% \begin{macrocode} |
| 18649 |
\ifPOE@fiberpresetout@top\ifPOE@fiberpresetout@bottom |
| 18650 |
\@tempcnta=\POE@couplernodecount |
| 18651 |
\advance\@tempcnta by -3 |
| 18652 |
\ifnum0<\@tempcnta |
| 18653 |
\multido{\i=3+1}{\the\@tempcnta}{% |
| 18654 |
\drawfiber@{FiberOut}[startnode=\i]{}(! [ \coupler@coors \i\space \POE@dict{GetCoordinatePair} \tx@UserCoor) |
| 18655 |
}% |
| 18656 |
\fi |
| 18657 |
\fi\fi |
| 18658 |
\fi |
| 18659 |
\end@OptexpObj |
| 18660 |
}% |
| 18661 |
% \end{macrocode} |
| 18662 |
% \end{macro} |
| 18663 |
% |
| 18664 |
% \begin{macro}{\wdmcoupler} |
| 18665 |
% \begin{macrocode} |
| 18666 |
\def\wdmcoupler{\pst@object{wdmcoupler}}% |
| 18667 |
\def\wdmcoupler@i{% |
| 18668 |
\def\my@aftercoors{% |
| 18669 |
% \end{macrocode} |
| 18670 |
% Subtract one, because we counted all nodes. However, we can always access the last |
| 18671 |
% node by N, so we more often use the second last, i.e the last input node |
| 18672 |
% \begin{macrocode} |
| 18673 |
\advance\POE@couplernodecount by -1\relax% |
| 18674 |
\wdmcoupler@ii}% |
| 18675 |
\POE@couplernodecount=0\relax |
| 18676 |
\def\coupler@coors{}% |
| 18677 |
\coupler@@getcoors |
| 18678 |
} |
| 18679 |
% \end{macrocode} |
| 18680 |
% \begin{macro}{\coupler@@getcoors} |
| 18681 |
% Read in a variable number of node coordinates. The coordinates are saved in \cs{coupler@coors}, |
| 18682 |
% their number in \cs{POE@couplernodecount}. |
| 18683 |
% \begin{macrocode} |
| 18684 |
\def\coupler@@getcoors(#1){% |
| 18685 |
\advance\POE@couplernodecount by \@ne\relax% |
| 18686 |
\pst@@getcoor{#1}% |
| 18687 |
\edef\coupler@coors{\pst@coor\coupler@coors}% |
| 18688 |
\@ifnextchar({\coupler@@getcoors}{\my@aftercoors}% |
| 18689 |
} |
| 18690 |
% \end{macrocode} |
| 18691 |
% \end{macro} |
| 18692 |
% \begin{macrocode} |
| 18693 |
\def\wdmcoupler@ii{% |
| 18694 |
\@ifnextchar\bgroup% |
| 18695 |
{\wdmcoupler@iii}% |
| 18696 |
{\wdmcoupler@iii{}}% |
| 18697 |
}% |
| 18698 |
\def\wdmcoupler@iii#1{% |
| 18699 |
\ifnum\POE@couplernodecount>0\else |
| 18700 |
\PackageError{pst-optexp}% |
| 18701 |
{A wdmcoupler expects at least two nodes, one input and one output node}% |
| 18702 |
\fi |
| 18703 |
\begin@OptexpObj |
| 18704 |
\ifPOE@backlayer |
| 18705 |
% \end{macrocode} |
| 18706 |
% Use last coordinate pair as RefB |
| 18707 |
% \begin{macrocode} |
| 18708 |
\pnode(! [ \coupler@coors \the\POE@couplernodecount\space 1 add \POE@dict{GetCoordinatePair} \tx@UserCoor){\oenodeRefB{}} |
| 18709 |
\ifx\POE@key@coupleralign\POE@str@top |
| 18710 |
% \end{macrocode} |
| 18711 |
% For top alignment, use first coordinate pair as RefA |
| 18712 |
% \begin{macrocode} |
| 18713 |
\pnode(! [ \coupler@coors \POE@dict{GetFirstInputCoordinatePair} \tx@UserCoor){\oenodeRefA{}} |
| 18714 |
\else\ifx\POE@key@coupleralign\POE@str@bottom |
| 18715 |
% \end{macrocode} |
| 18716 |
% For bottom alignment, use second last coordinate pair as RefA |
| 18717 |
% \begin{macrocode} |
| 18718 |
\pnode(! [ \coupler@coors \POE@dict{GetLastInputCoordinatePair} \tx@UserCoor){\oenodeRefA{}} |
| 18719 |
\else |
| 18720 |
% \end{macrocode} |
| 18721 |
% Use median of all input coordinate pairs as RefA |
| 18722 |
% \begin{macrocode} |
| 18723 |
\pnode(! [ \coupler@coors |
| 18724 |
% \end{macrocode} |
| 18725 |
% remove output node from stack |
| 18726 |
% \begin{macrocode} |
| 18727 |
counttomark -2 roll pop pop |
| 18728 |
% \end{macrocode} |
| 18729 |
% count number of input coordinate pair, keep that number and save it behind the mark |
| 18730 |
% \begin{macrocode} |
| 18731 |
counttomark 2 idiv dup counttomark 1 add 1 roll |
| 18732 |
1 sub { \POE@dict{VecAdd} } repeat |
| 18733 |
% \end{macrocode} |
| 18734 |
% divide by number of input coordinate pairs and remove mark |
| 18735 |
% \begin{macrocode} |
| 18736 |
4 -1 roll 1 exch div \POE@dict{VecScale} 3 -1 roll pop \tx@UserCoor){\oenodeRefA{}} |
| 18737 |
\fi\fi |
| 18738 |
\fi |
| 18739 |
\POE@drawcomponent{wdmcoupler}{#1} |
| 18740 |
\ifPOE@backlayer |
| 18741 |
\POE@Verb{% |
| 18742 |
1 1 \the\POE@couplernodecount\space |
| 18743 |
{ |
| 18744 |
inttostr \the\POE@couplernodecount\space 1 add inttostr (\oenode{}{}) CorrectDipoleIfc |
| 18745 |
} for |
| 18746 |
}% |
| 18747 |
\ifPOE@fiberpresetout@ |
| 18748 |
\drawfiber@{FiberOut}[startnode=N]{}(\oenodeRefB{}) |
| 18749 |
\fi |
| 18750 |
\ifPOE@fiberpresetin@ |
| 18751 |
\ifPOE@fiberpresetin@top |
| 18752 |
\drawfiber@{FiberIn1}[stopnode=1](! [ \coupler@coors 1 \POE@dict{GetCoordinatePair} \tx@UserCoor){} |
| 18753 |
\fi |
| 18754 |
\ifPOE@fiberpresetin@bottom |
| 18755 |
\drawfiber@{FiberIn2}[stopnode=\the\POE@couplernodecount](! [ \coupler@coors \the\POE@couplernodecount\space \POE@dict{GetCoordinatePair} \tx@UserCoor){} |
| 18756 |
\fi |
| 18757 |
% \end{macrocode} |
| 18758 |
% If top and bottom fibers are drawn, we must also draw all other input fibers |
| 18759 |
% \begin{macrocode} |
| 18760 |
\ifPOE@fiberpresetin@top\ifPOE@fiberpresetin@bottom |
| 18761 |
\@tempcnta=\POE@couplernodecount |
| 18762 |
\advance\@tempcnta by -2 |
| 18763 |
\ifnum0<\@tempcnta |
| 18764 |
\multido{\i=2+1}{\the\@tempcnta}{% |
| 18765 |
\drawfiber@{FiberIn}[stopnode=\i](! [ \coupler@coors \i\space \POE@dict{GetCoordinatePair} \tx@UserCoor){} |
| 18766 |
}% |
| 18767 |
\fi |
| 18768 |
\fi\fi |
| 18769 |
\fi |
| 18770 |
\fi |
| 18771 |
\end@OptexpObj |
| 18772 |
}% |
| 18773 |
% \end{macrocode} |
| 18774 |
% \end{macro} |
| 18775 |
% |
| 18776 |
% \begin{macro}{\optcirculator} |
| 18777 |
% \begin{macrocode} |
| 18778 |
\def\optcirculator{\pst@object{optcirculator}}% |
| 18779 |
\def\optcirculator@i(#1)(#2)(#3){% |
| 18780 |
\@ifnextchar\bgroup% |
| 18781 |
{\optcirculator@ii(#1)(#2)(#3)}% |
| 18782 |
{\optcirculator@ii(#1)(#2)(#3){}}% |
| 18783 |
}% |
| 18784 |
\def\POE@calcCircRefNodes#1#2#3{% |
| 18785 |
\ifPOE@backlayer |
| 18786 |
\POE@regNodes{#1}{#2} |
| 18787 |
\ifx\POE@key@position\@empty |
| 18788 |
\ifx\POE@key@abspos\@empty |
| 18789 |
\POE@positionrefnodes |
| 18790 |
\pst@getcoor{#1}\POE@tempa% |
| 18791 |
\pst@getcoor{#2}\POE@tempc% |
| 18792 |
\pst@getcoor{#3}\POE@tempb% |
| 18793 |
\pnode(! \POE@dict{% |
| 18794 |
\POE@tempa \tx@UserCoor 2 copy 2 copy |
| 18795 |
\POE@tempc \tx@UserCoor 4 2 roll @ABVect |
| 18796 |
2 copy 2 copy 10 4 roll |
| 18797 |
\POE@tempb \tx@UserCoor 6 -2 roll @ABVect |
| 18798 |
4 2 roll tx@EcldDict begin Project end VecAdd |
| 18799 |
2 copy 6 -2 roll -0.5 VecScale VecAdd |
| 18800 |
}){\oenode@RefA{}}% |
| 18801 |
\pnode(! \POE@dict{4 2 roll 0.5 VecScale VecAdd})% |
| 18802 |
{\oenode@RefB{}}% |
| 18803 |
\fi |
| 18804 |
\fi |
| 18805 |
\fi |
| 18806 |
}% |
| 18807 |
\def\optcirculator@ii(#1)(#2)(#3)#4{% |
| 18808 |
\addafter@par{ref@angle=0}% |
| 18809 |
\begin@OptexpObj |
| 18810 |
\POE@calcCircRefNodes{#1}{#2}{#3}% |
| 18811 |
\POE@drawcomponent{optcirculator}{#4} |
| 18812 |
\ifPOE@backlayer |
| 18813 |
\ifPOE@fiberpresetin@top |
| 18814 |
\drawfiber@{FiberIn}[stopnode=1](#1){} |
| 18815 |
\fi |
| 18816 |
\ifPOE@fiberpresetout@ |
| 18817 |
\ifPOE@fiberpresetout@top |
| 18818 |
\drawfiber@{FiberOut1}[startnode=N]{}(#2) |
| 18819 |
\fi |
| 18820 |
\ifPOE@fiberpresetout@bottom |
| 18821 |
\drawfiber@{FiberOut2}[startnode=2, fiberalign=center]{}(#3) |
| 18822 |
\fi |
| 18823 |
\fi |
| 18824 |
\fi |
| 18825 |
\end@OptexpObj |
| 18826 |
}% |
| 18827 |
% \end{macrocode} |
| 18828 |
% \end{macro} |
| 18829 |
% |
| 18830 |
% \begin{macro}{\fiberbox} |
| 18831 |
% \begin{macrocode} |
| 18832 |
\def\fiberbox{\pst@object{fiberbox}}% |
| 18833 |
\def\fiberbox@i(#1)(#2){% |
| 18834 |
\@ifnextchar(%) |
| 18835 |
{\fiberbox@ii(#1)(#2)}% |
| 18836 |
{\fiberbox@ii(#1)(#2)()()}% |
| 18837 |
}% |
| 18838 |
\def\fiberbox@ii(#1)(#2)(#3)(#4){% |
| 18839 |
\@ifnextchar\bgroup% |
| 18840 |
{\fiberbox@iii(#1)(#2)(#3)(#4)}% |
| 18841 |
{\fiberbox@iii(#1)(#2)(#3)(#4){}}% |
| 18842 |
}% |
| 18843 |
\def\fiberbox@iii(#1)(#2)(#3)(#4)#5{% |
| 18844 |
\begin@OptexpObj |
| 18845 |
\ifnum\POE@key@fiberboxcountin=1 |
| 18846 |
\ifnum\POE@key@fiberboxcountout=1 |
| 18847 |
\ifdim\POE@key@fiberboxheight pt=0pt |
| 18848 |
\PackageError{pst-optexp}{% |
| 18849 |
Cannot determine height of 1x1 fiberbox automatically, |
| 18850 |
use fiberboxheight}% |
| 18851 |
\fi |
| 18852 |
\fi |
| 18853 |
\fi |
| 18854 |
\ifPOE@backlayer |
| 18855 |
\ifx\\#3#4\\% |
| 18856 |
\POE@regNodes{#1}{#2} |
| 18857 |
\POE@Verb{/@@inht 0 def /@@outht 0 def}% |
| 18858 |
\else |
| 18859 |
\pst@getcoor{#1}\POE@tempa% |
| 18860 |
\pst@getcoor{#2}\POE@tempb% |
| 18861 |
\pst@getcoor{#3}\POE@tempc% |
| 18862 |
\pst@getcoor{#4}\POE@tempd% |
| 18863 |
\pnode(!\POE@tempa \POE@tempb |
| 18864 |
\POE@dict{VecAdd 0.5 VecScale} |
| 18865 |
\tx@UserCoor){\oenodeRefA{}} |
| 18866 |
\pnode(!\POE@tempc \POE@tempd |
| 18867 |
\POE@dict{VecAdd 0.5 VecScale} |
| 18868 |
\tx@UserCoor){\oenodeRefB{}} |
| 18869 |
\POE@regNodes@ |
| 18870 |
\POE@Verb{% |
| 18871 |
gsave |
| 18872 |
STV CP T |
| 18873 |
/N@\oenodeRefA{} @GetCenter |
| 18874 |
/N@\oenodeRefB{} @GetCenter @ABVect NormalizeVec |
| 18875 |
90 matrix rotate dtransform 2 copy |
| 18876 |
\POE@tempa \POE@tempb @ABVect |
| 18877 |
\tx@UserCoor DotProd abs 3 1 roll |
| 18878 |
\POE@tempc \POE@tempd @ABVect |
| 18879 |
\tx@UserCoor DotProd abs |
| 18880 |
grestore |
| 18881 |
/@@outht ED /@@inht ED |
| 18882 |
}% |
| 18883 |
\fi |
| 18884 |
\fi |
| 18885 |
\POE@drawcomponent{fiberbox}{#5} |
| 18886 |
\ifPOE@backlayer |
| 18887 |
\ifx\\#3#4\\% |
| 18888 |
% \end{macrocode} |
| 18889 |
% Connect only, if the fiberbox has a single related interface node. |
| 18890 |
% \begin{macrocode} |
| 18891 |
\ifnum\POE@key@fiberboxcountin=1 |
| 18892 |
\ifPOE@fiberpresetin@ |
| 18893 |
\drawfiber@{FiberIn}(#1){} |
| 18894 |
\else\ifPOE@wirein@ |
| 18895 |
\drawwire@{WireIn}(#1){} |
| 18896 |
\fi\fi |
| 18897 |
\fi |
| 18898 |
\ifnum\POE@key@fiberboxcountout=1 |
| 18899 |
\ifPOE@fiberpresetout@ |
| 18900 |
\drawfiber@{FiberOut}{}(#2) |
| 18901 |
\else\ifPOE@wireout@ |
| 18902 |
\drawwire@{WireOut}{}(#2) |
| 18903 |
\fi\fi |
| 18904 |
\fi |
| 18905 |
\else |
| 18906 |
% \end{macrocode} |
| 18907 |
% If four reference nodes are specified, connect all of them with the respective interface |
| 18908 |
% nodes they are aligned to. |
| 18909 |
% \begin{macrocode} |
| 18910 |
\ifPOE@fiberpresetin@top |
| 18911 |
\drawfiber@{FiberIn1}(#1){} |
| 18912 |
\else\ifPOE@wirein@top |
| 18913 |
\drawwire@{WireIn1}(#1){} |
| 18914 |
\fi\fi |
| 18915 |
\ifPOE@fiberpresetin@bottom |
| 18916 |
\drawfiber@{FiberIn2}(#2){} |
| 18917 |
\else\ifPOE@wirein@bottom |
| 18918 |
\drawwire@{WireIn2}(#2){} |
| 18919 |
\fi\fi |
| 18920 |
\ifPOE@fiberpresetout@top |
| 18921 |
\drawfiber@{FiberOut1}{}(#3) |
| 18922 |
\else\ifPOE@wireout@top |
| 18923 |
\drawwire@{WireOut1}{}(#3) |
| 18924 |
\fi\fi |
| 18925 |
\ifPOE@fiberpresetout@bottom |
| 18926 |
\drawfiber@{FiberOut2}{}(#4) |
| 18927 |
\else\ifPOE@wireout@bottom |
| 18928 |
\drawwire@{WireOut2}{}(#4) |
| 18929 |
\fi\fi |
| 18930 |
\fi |
| 18931 |
\fi |
| 18932 |
\end@OptexpObj |
| 18933 |
}% |
| 18934 |
% \end{macrocode} |
| 18935 |
% \end{macro} |
| 18936 |
% |
| 18937 |
% \begin{macro}{\POE@calcNodes} |
| 18938 |
% Some of the components need three points to be positioned. |
| 18939 |
% These are: |
| 18940 |
% |
| 18941 |
% \begin{enumerate} |
| 18942 |
% \item starting point of the beam (in the PS-Code: (XA,YA)) |
| 18943 |
% \item reflection point on the surface (XG, YG) |
| 18944 |
% \item end point (XB,YB) |
| 18945 |
% \end{enumerate} |
| 18946 |
% |
| 18947 |
% With these three points \cs{poe@calcNodes} calculates two new points 'tempNode@A' |
| 18948 |
% and 'tempNode@B', between which the component is placed by the macro |
| 18949 |
% \cs{poe@drawcomponent} in the way, that 'angle of incidence' == 'angle of deflection' |
| 18950 |
% regarding the reflection surface (mirror, diagonal of the beamsplitter, |
| 18951 |
% grid etc.) |
| 18952 |
% \begin{macrocode} |
| 18953 |
\def\POE@calcNodes#1#2#3{{% |
| 18954 |
\pst@getcoor{#1}\POE@tempa% |
| 18955 |
\pst@getcoor{#2}\POE@tempb% |
| 18956 |
\pst@getcoor{#3}\POE@tempc% |
| 18957 |
\pnode(! \POE@dict{% |
| 18958 |
\POE@tempa \tx@UserCoor |
| 18959 |
\POE@tempc \tx@UserCoor |
| 18960 |
\POE@tempb \tx@UserCoor |
| 18961 |
calcNodes /exch@ref@\oenode{}{} ED |
| 18962 |
X@A Y@A}){\oenode@RefA{}}% |
| 18963 |
\pnode(! \POE@dict{X@B Y@B}){\oenode@RefB{}}% |
| 18964 |
\pnode(#2){\oenode@Origin{}}% |
| 18965 |
}\ignorespaces}% |
| 18966 |
% \end{macrocode} |
| 18967 |
% \end{macro} |
| 18968 |
% |
| 18969 |
% \begin{macro}{\POE@calcAngle} |
| 18970 |
% Calculate the angle between the vectors A->O and B->0, which is |
| 18971 |
% needed by \cs{rightangleprism} and \cs{optprism}. Also calculate the |
| 18972 |
% angle difference between 'Winkelhalbierende' and |
| 18973 |
% 'Seitenhalbierende', which is required for some corrections in |
| 18974 |
% \cs{rightangleprism}. |
| 18975 |
% \begin{macrocode} |
| 18976 |
\def\POE@calcAngle{% |
| 18977 |
\POE@Verb{% |
| 18978 |
gsave |
| 18979 |
STV CP T |
| 18980 |
/N@\oenode@Origin{} @GetCenter 2 copy |
| 18981 |
/N@\oenodeRefA{} @GetCenter VecSub /ay ED /ax ED |
| 18982 |
/N@\oenodeRefB{} @GetCenter VecSub /by ED /bx ED |
| 18983 |
% \end{macrocode} |
| 18984 |
% Winkelhalbierende (cx, cy) |
| 18985 |
% \begin{macrocode} |
| 18986 |
ax ay NormalizeVec bx by NormalizeVec VecAdd |
| 18987 |
2 copy Pyth abs 1e-4 lt { |
| 18988 |
% \end{macrocode} |
| 18989 |
% vectors a and b are antiparallel |
| 18990 |
% \begin{macrocode} |
| 18991 |
pop pop |
| 18992 |
ax ay 90 matrix rotate dtransform |
| 18993 |
} if |
| 18994 |
NormalizeVec 2 copy |
| 18995 |
% \end{macrocode} |
| 18996 |
% Seitenhalbierende |
| 18997 |
% \begin{macrocode} |
| 18998 |
ax ay bx by VecAdd |
| 18999 |
2 copy Pyth abs 1e-4 lt { |
| 19000 |
% \end{macrocode} |
| 19001 |
% vectors a and b are parallel |
| 19002 |
% \begin{macrocode} |
| 19003 |
pop pop ax ay |
| 19004 |
} if |
| 19005 |
NormalizeVec |
| 19006 |
4 copy 4 copy |
| 19007 |
DotProd Acos 5 1 roll Chirality mul |
| 19008 |
/dOEangle exch def |
| 19009 |
ax ay Pyth bx by Pyth |
| 19010 |
2 copy dup mul exch dup mul add |
| 19011 |
ax bx sub ay by sub Pyth dup mul exch sub |
| 19012 |
3 1 roll -2 mul mul div Acos /OEangle exch def |
| 19013 |
% \end{macrocode} |
| 19014 |
% project vector (ax, by) on the normal to the bisector |
| 19015 |
% \begin{macrocode} |
| 19016 |
neg exch ax ay \tx@UserCoor DotProd abs /@myht exch def |
| 19017 |
grestore |
| 19018 |
}% |
| 19019 |
\ignorespaces}% |
| 19020 |
% \end{macrocode} |
| 19021 |
% \end{macro} |
| 19022 |
% |
| 19023 |
% \begin{macro}{\POE@saveDiffractionNodes} |
| 19024 |
% \begin{macrocode} |
| 19025 |
\def\POE@saveDiffractionNodes{% |
| 19026 |
\POE@Verb{% |
| 19027 |
gsave |
| 19028 |
STV CP T |
| 19029 |
/N@\oenodeRefA{} @GetCenter |
| 19030 |
/N@\oenode@Origin{} @GetCenter @ABVect exch atan /myangle ED |
| 19031 |
/N@\oenode@Origin{} @GetCenter |
| 19032 |
/N@\oenodeRefB{} @GetCenter @ABDist /mydist ED |
| 19033 |
grestore |
| 19034 |
}% |
| 19035 |
\pnode(! \POE@dict{mydist myangle 180 sub} PtoC \tx@UserCoor){\oenode{DO0}{}}% |
| 19036 |
\multido{\i=1+1}{\POE@key@diffractionorders}{% |
| 19037 |
\pnode(! \POE@dict{mydist myangle 180 sub 180 OEangle sub \i\space mul } add PtoC \tx@UserCoor){\oenode{DO\i}{}}% |
| 19038 |
\pnode(! \POE@dict{mydist myangle 180 sub 180 OEangle sub \i\space mul } sub PtoC \tx@UserCoor){\oenode{DO-\i}{}}% |
| 19039 |
}% |
| 19040 |
\ignorespaces}% |
| 19041 |
% \end{macrocode} |
| 19042 |
% \end{macro} |
| 19043 |
% |
| 19044 |
% \begin{macro}{\POE@regNodes} |
| 19045 |
% If a macro needs only two points, they are equivalent to |
| 19046 |
% 'tempNode@A' and 'tempNode@B'. But for easier implementation of other |
| 19047 |
% macros the given points are assigned to the temporary nodes. |
| 19048 |
% \begin{macrocode} |
| 19049 |
\def\POE@regNodes#1#2{% |
| 19050 |
\pnode(#1){\oenodeRefA{}} |
| 19051 |
\pnode(#2){\oenodeRefB{}} |
| 19052 |
\POE@regNodes@ |
| 19053 |
\ignorespaces}% |
| 19054 |
% \end{macrocode} |
| 19055 |
% \end{macro} |
| 19056 |
% |
| 19057 |
% \begin{macro}{\POE@regNodes@} |
| 19058 |
% Some additional work which needs to be done in \cs{POE@regNodes}, but must be |
| 19059 |
% called separately in some cases (e.g. \cs{fiberbox}). |
| 19060 |
% \begin{macrocode} |
| 19061 |
\def\POE@regNodes@{% |
| 19062 |
\POE@Verb{% |
| 19063 |
/@xref [\POE@key@extnode@xrefs] def |
| 19064 |
/@yref [\POE@key@extnode@yrefs] def |
| 19065 |
/@@ang |
| 19066 |
\ifx\POE@key@innercompalign\POE@str@absolute |
| 19067 |
/N@\POE@refnodeA\space /N@\POE@refnodeB\space SlopeAngle |
| 19068 |
\else |
| 19069 |
0 |
| 19070 |
\fi def |
| 19071 |
}% |
| 19072 |
\ifx\POE@key@extnodealign\POE@str@absolute |
| 19073 |
\POE@Verb{% |
| 19074 |
/N@\POE@refnodeA\space @GetCenter /N@\POE@refnodeB\space @GetCenter |
| 19075 |
@ABVect exch |
| 19076 |
dup 0 gt 3 1 roll 0 eq exch 0 lt and or |
| 19077 |
{ /RefFac -1 def } if |
| 19078 |
}% |
| 19079 |
\fi |
| 19080 |
\ignorespaces}% |
| 19081 |
% \end{macrocode} |
| 19082 |
% \end{macro} |
| 19083 |
% |
| 19084 |
% \begin{macro}{\POE@pnode@shiftedrot} |
| 19085 |
% Define a new node \#3 shifted by (\#1) relative to existing node \#2. |
| 19086 |
% Aditionally rotate the new node by \#4 degree around existing node as origin. |
| 19087 |
% \begin{macrocode} |
| 19088 |
\def\POE@pnode@shiftedrot(#1)#2#3#4{% |
| 19089 |
\pst@getcoor{#1}\POE@temp% |
| 19090 |
\pnode(! \POE@dict{ |
| 19091 |
/N@#2 @GetCenter \POE@temp |
| 19092 |
#4 \POE@key@labelrefangle\space add matrix rotate dtransform |
| 19093 |
VecAdd \tx@UserCoor }){#3}% |
| 19094 |
\psset[optexp]{ref@angle=0} |
| 19095 |
}% |
| 19096 |
% \end{macrocode} |
| 19097 |
% \end{macro} |
| 19098 |
% |
| 19099 |
% \begin{macro}{\POE@nlput} |
| 19100 |
% We cannot use \cs{nlput} from \opt{pst-node}, because that does not work |
| 19101 |
% correctly for negative distances together with \opt{nrot=:U}, which happens |
| 19102 |
% for \opt{position=start}. |
| 19103 |
% \begin{macrocode} |
| 19104 |
\def\POE@nlput{\pst@object{POE@nlput}} |
| 19105 |
\def\POE@nlput@i(#1)(#2)#3#4{% |
| 19106 |
\begin@SpecialObj |
| 19107 |
\POE@LDNode(#1)(#2){#3} |
| 19108 |
\pcline[linestyle=none,fillstyle=none, arrows=-, ArrowInside=-](temp@nlputA)(temp@nlputB)% |
| 19109 |
\ncput[npos=0.5]{#4}% |
| 19110 |
\end@SpecialObj} |
| 19111 |
% \end{macrocode} |
| 19112 |
% \end{macro} |
| 19113 |
% |
| 19114 |
% \begin{macro}{\POE@LDNode} |
| 19115 |
% \begin{macrocode} |
| 19116 |
\def\POE@LDNode(#1)(#2)#3{% |
| 19117 |
\pst@getcoor{#1}\pst@tempA% |
| 19118 |
\pst@getcoor{#2}\pst@tempB% |
| 19119 |
\pnode(! |
| 19120 |
\pst@tempA \tx@UserCoor /YA ED /XA ED |
| 19121 |
\pst@tempB \tx@UserCoor /YB ED /XB ED |
| 19122 |
/dx XB XA sub def |
| 19123 |
/dy YB YA sub def |
| 19124 |
/angle dy dx Atan def |
| 19125 |
XA #3 1 sub angle cos mul add |
| 19126 |
YA #3 1 sub angle sin mul add ){temp@nlputA}% |
| 19127 |
\pnode(! |
| 19128 |
\pst@tempA \tx@UserCoor /YA ED /XA ED |
| 19129 |
\pst@tempB \tx@UserCoor /YB ED /XB ED |
| 19130 |
/dx XB XA sub def |
| 19131 |
/dy YB YA sub def |
| 19132 |
/angle dy dx Atan def |
| 19133 |
XA #3 1 add angle cos mul add |
| 19134 |
YA #3 1 add angle sin mul add ){temp@nlputB}% |
| 19135 |
} |
| 19136 |
% \end{macrocode} |
| 19137 |
% \end{macro} |
| 19138 |
% |
| 19139 |
% \begin{macro}{\POE@putlabelrelative} |
| 19140 |
% Used to put the label for labelref=relative |
| 19141 |
% \begin{macrocode} |
| 19142 |
\def\POE@putlabelrelative#1{% |
| 19143 |
\nput[labelsep=0]{\POE@key@labelangle}% |
| 19144 |
{\oenodeLabel{}}% |
| 19145 |
{\rput[\POE@key@labelalign](0,0){\POE@key@labelstyle #1}}% |
| 19146 |
}% |
| 19147 |
% \end{macrocode} |
| 19148 |
% \end{macro} |
| 19149 |
% |
| 19150 |
% \begin{macro}{\POE@putcomp} |
| 19151 |
% Place the component in argument \#1 and define a new node |
| 19152 |
% \oenodeLabel{} for positioning of the label. |
| 19153 |
% \begin{macrocode} |
| 19154 |
\def\POE@putcomp#1{% |
| 19155 |
\rput(! \POE@key@comp@Xshift\space\POE@key@comp@Yshift){% |
| 19156 |
\pnode(! \POE@dict{ |
| 19157 |
\POE@key@rotate@xref\space |
| 19158 |
\POE@key@rotate@yref\space |
| 19159 |
DefineExtNode}){\oenodeRotref{}}% |
| 19160 |
\psrotate(\oenodeRotref{}){!\POE@key@angle}{% |
| 19161 |
#1% |
| 19162 |
\POE@pnode@shiftedrot(0,\POE@key@labeloffset)% |
| 19163 |
{\oenodeCenter{}}% |
| 19164 |
{\oenodeLabel{}}% |
| 19165 |
{\POE@key@labelangle}% |
| 19166 |
}% |
| 19167 |
}% |
| 19168 |
}% |
| 19169 |
% \end{macrocode} |
| 19170 |
% \end{macro} |
| 19171 |
% |
| 19172 |
% \begin{macro}{\POE@putlabel} |
| 19173 |
% Positioning of the label depending on the reference coordinates. |
| 19174 |
% Needs possibly a previously defined node \cs{oenodeLabel} which |
| 19175 |
% marks exactly the position of the label relative to the component. |
| 19176 |
% This is defined by calling \cs{poe@putcomp}. |
| 19177 |
% \begin{macrocode} |
| 19178 |
\def\POE@putlabel#1{% |
| 19179 |
\def\POE@temp{#1}% |
| 19180 |
% \end{macrocode} |
| 19181 |
% Put the label only if it's not empty. |
| 19182 |
% \begin{macrocode} |
| 19183 |
\ifx\POE@temp\@empty |
| 19184 |
% \end{macrocode} |
| 19185 |
% Place the correct 'global' label node when the label is empty. |
| 19186 |
% \begin{macrocode} |
| 19187 |
\ifx\POE@key@labelref\POE@str@global |
| 19188 |
\nput[labelsep=\POE@key@labeloffset]% |
| 19189 |
{\POE@key@labelangle}% |
| 19190 |
{\oenodeCenter{}}% |
| 19191 |
{\pnode(0,0){\oenodeLabel{}}}% |
| 19192 |
\fi |
| 19193 |
\else |
| 19194 |
% \end{macrocode} |
| 19195 |
% For \opt{global} positioning, the label is placed in global coordinate system |
| 19196 |
% with respect to the center node. |
| 19197 |
% \begin{macrocode} |
| 19198 |
\ifx\POE@key@labelref\POE@str@global |
| 19199 |
\nput[labelsep=\POE@key@labeloffset]% |
| 19200 |
{\POE@key@labelangle}% |
| 19201 |
{\oenodeCenter{}}% |
| 19202 |
{\pnode(0,0){\oenodeLabel{}}% |
| 19203 |
\rput[\POE@key@labelalign](0,0){\POE@key@labelstyle\oelabel{#1}}}% |
| 19204 |
% \end{macrocode} |
| 19205 |
% Rotate the label node together with the component, but do not rotate the label |
| 19206 |
% text itself. |
| 19207 |
% \begin{macrocode} |
| 19208 |
\else\ifx\POE@key@labelref\POE@str@relgrav |
| 19209 |
\rput[\POE@key@labelalign](\oenodeLabel{}){% |
| 19210 |
\POE@key@labelstyle\oelabel{#1}}% |
| 19211 |
% \end{macrocode} |
| 19212 |
% Rotate label node and label text with the component. |
| 19213 |
% \begin{macrocode} |
| 19214 |
\else\ifx\POE@key@labelref\POE@str@relative |
| 19215 |
\begingroup |
| 19216 |
% \end{macrocode} |
| 19217 |
% Redefine InitNC only for positioning of the label with labelref=relative |
| 19218 |
% \begin{macrocode} |
| 19219 |
\pst@def{InitNC}< % kindly contributed by Herbert Voss |
| 19220 |
/b ED /a ED |
| 19221 |
/NodeSepTypeB ED /NodeSepTypeA ED |
| 19222 |
/NodeSepB ED /NodeSepA ED |
| 19223 |
/OffsetB ED /OffsetA ED |
| 19224 |
tx@NodeDict a known tx@NodeDict b known and dup { |
| 19225 |
/NodeA a load def /NodeB b load def |
| 19226 |
NodeA GetCenter NodeB GetCenter |
| 19227 |
4 copy exch 4 -1 roll 2 copy gt |
| 19228 |
{ pop pop pop pop /yB ED /xB ED /yA ED /xA ED } |
| 19229 |
{ eq 3 1 roll lt and |
| 19230 |
{ /yB ED /xB ED /yA ED /xA ED} |
| 19231 |
{ /yA ED /xA ED /yB ED /xB ED} ifelse |
| 19232 |
} ifelse |
| 19233 |
} if >% |
| 19234 |
\ncline[linestyle=none,fillstyle=none, npos=, arrows=-, ArrowInside=-]% |
| 19235 |
{\POE@trefnodeA}{\POE@trefnodeB}% |
| 19236 |
\ifx\POE@key@position\@empty |
| 19237 |
\ifx\POE@key@abspos\@empty |
| 19238 |
\ncput[nrot=:U,npos=]{\POE@putlabelrelative{\oelabel{#1}}}% |
| 19239 |
\else |
| 19240 |
\POE@nlput[nrot=:U](\POE@trefnodeA)(\POE@trefnodeB)% |
| 19241 |
{\POE@key@abspos}{\POE@putlabelrelative{\oelabel{#1}}}% |
| 19242 |
\fi |
| 19243 |
\else |
| 19244 |
\ncput[nrot=:U, npos=\POE@key@position]% |
| 19245 |
{\POE@putlabelrelative{\oelabel{#1}}}% |
| 19246 |
\fi |
| 19247 |
\endgroup |
| 19248 |
\fi\fi\fi |
| 19249 |
\fi |
| 19250 |
}% |
| 19251 |
% \end{macrocode} |
| 19252 |
% \end{macro} |
| 19253 |
% |
| 19254 |
% \subsection{Free-ray components} |
| 19255 |
% |
| 19256 |
% Define all free-ray dipoles |
| 19257 |
% \begin{macrocode} |
| 19258 |
\newOptexpDipole{lens} |
| 19259 |
\newOptexpDipole{asphericlens} |
| 19260 |
\newOptexpDipole{pinhole} |
| 19261 |
\newOptexpDipole{crystal} |
| 19262 |
\newOptexpDipole{polarization} |
| 19263 |
\newOptexpDipole{optbox} |
| 19264 |
\newOptexpDipole{optsource}{position=start} |
| 19265 |
\newOptexpDipole{optplate} |
| 19266 |
\newOptexpDipole{optretplate} |
| 19267 |
\newOptexpDipole{optdetector}{position=end} |
| 19268 |
\newOptexpDipole{optdiode}{allowbeaminside=false} |
| 19269 |
\newOptexpDipole{doveprism} |
| 19270 |
\newOptexpDipole{glanthompson} |
| 19271 |
\newOptexpDipole{parabolicmirror}{position=end, ref@angle=-90} |
| 19272 |
\newOptexpDipole{axicon} |
| 19273 |
\newOptexpDipole{optwedge} |
| 19274 |
% \end{macrocode} |
| 19275 |
% |
| 19276 |
% Define all free-ray tripoles |
| 19277 |
% \begin{macrocode} |
| 19278 |
\newOptexpTripole{mirror} |
| 19279 |
\newOptexpTripole[ref@angle=45]{beamsplitter} |
| 19280 |
\newOptexpTripole{optgrating} |
| 19281 |
\newOptexpTripole[ref@angle=90]{transmissiongrating} |
| 19282 |
\newOptexpTripole[ref@angle=45]{pentaprism} |
| 19283 |
\newOptexpTripole[ref@angle=45]{rightangleprism} |
| 19284 |
\newOptexpTripole[ref@angle=45]{optprism} |
| 19285 |
\newOptexpTripole{oapmirror} |
| 19286 |
% \end{macrocode} |
| 19287 |
% |
| 19288 |
% \begin{macro}{\optdipole} |
| 19289 |
% \begin{macrocode} |
| 19290 |
\def\optdipole{\pst@object{optdipole}} |
| 19291 |
\def\optdipole@i(#1)(#2){% |
| 19292 |
\@ifnextchar\bgroup% |
| 19293 |
{\optdipole@iii(#1)(#2)}% |
| 19294 |
{\optdipole@ii(#1)(#2)}% |
| 19295 |
}% |
| 19296 |
\def\optdipole@ii(#1)(#2){% |
| 19297 |
\optdipole@v(#1)(#2){}{}% |
| 19298 |
}% |
| 19299 |
\def\optdipole@iii(#1)(#2)#3{% |
| 19300 |
\@ifnextchar\bgroup% |
| 19301 |
{\optdipole@iv(#1)(#2){#3}}% |
| 19302 |
{\optdipole@v(#1)(#2){#3}}% |
| 19303 |
}% |
| 19304 |
\def\optdipole@iv(#1)(#2)#3#4{% |
| 19305 |
\addbefore@par{innercompalign=relative}% |
| 19306 |
\begin@OptexpObj |
| 19307 |
\ifPOE@backlayer |
| 19308 |
\POE@regNodes{#1}{#2}% |
| 19309 |
\fi |
| 19310 |
\def\optdipole@comp{\psrotate(0,0){!\POE@dict{@@ang}}{#3}}% |
| 19311 |
\POE@drawcomponent{optdipole}{#4}% |
| 19312 |
\ifPOE@backlayer |
| 19313 |
\POE@InternalConn |
| 19314 |
\fi |
| 19315 |
\end@OptexpObj |
| 19316 |
}% |
| 19317 |
% \end{macrocode} |
| 19318 |
% Only one argument given, decide if this is supposed to be the label, |
| 19319 |
% or the component. |
| 19320 |
% \begin{macrocode} |
| 19321 |
\def\optdipole@v(#1)(#2)#3{% |
| 19322 |
\addbefore@par{innercompalign=relative}% |
| 19323 |
\begin@OptexpObj |
| 19324 |
\ifPOE@backlayer |
| 19325 |
\POE@regNodes{#1}{#2} |
| 19326 |
\fi |
| 19327 |
\ifx\POE@key@optdipolecomp\@empty |
| 19328 |
\def\optdipole@comp{\psrotate(0,0){!\POE@dict{@@ang}}{#3}}% |
| 19329 |
\POE@drawcomponent{optdipole}{} |
| 19330 |
\else |
| 19331 |
\def\optdipole@comp{\psrotate(0,0){!\POE@dict{@@ang}}{\POE@key@optdipolecomp}}% |
| 19332 |
\POE@drawcomponent{optdipole}{#3} |
| 19333 |
\fi |
| 19334 |
\ifPOE@backlayer |
| 19335 |
\POE@InternalConn |
| 19336 |
\fi |
| 19337 |
\end@OptexpObj |
| 19338 |
}% |
| 19339 |
\def\optdipole@nodes{\POE@dipole@nodes} |
| 19340 |
% \end{macrocode} |
| 19341 |
% \end{macro} |
| 19342 |
% |
| 19343 |
% \begin{macro}{\optdipole@ref} |
| 19344 |
% \begin{macrocode} |
| 19345 |
\def\optdipole@ref{% |
| 19346 |
\POE@setref{% |
| 19347 |
/@@x \POE@key@optdipolewidth\space 0.5 mul def |
| 19348 |
/@@y \POE@key@optdipoleheight\space 0.5 mul def |
| 19349 |
}% |
| 19350 |
}% |
| 19351 |
% \end{macrocode} |
| 19352 |
% \end{macro} |
| 19353 |
% |
| 19354 |
% \begin{macro}{\opttripole} |
| 19355 |
% \begin{macrocode} |
| 19356 |
\def\opttripole{\pst@object{opttripole}} |
| 19357 |
\def\opttripole@i(#1)(#2)(#3){% |
| 19358 |
\@ifnextchar\bgroup |
| 19359 |
{\opttripole@iii(#1)(#2)(#3)}% |
| 19360 |
{\opttripole@ii(#1)(#2)(#3)}% |
| 19361 |
}% |
| 19362 |
\def\opttripole@ii(#1)(#2)(#3){% |
| 19363 |
\opttripole@v(#1)(#2)(#3){}{}% |
| 19364 |
}% |
| 19365 |
\def\opttripole@iii(#1)(#2)(#3)#4{% |
| 19366 |
\@ifnextchar\bgroup |
| 19367 |
{\opttripole@iv(#1)(#2)(#3){#4}}% |
| 19368 |
{\opttripole@v(#1)(#2)(#3){#4}}% |
| 19369 |
}% |
| 19370 |
\def\opttripole@iv(#1)(#2)(#3)#4#5{% |
| 19371 |
\addafter@par{ref@angle=0} |
| 19372 |
\begin@OptexpTripole |
| 19373 |
\ifPOE@backlayer |
| 19374 |
\POE@calcNodes{#1}{#2}{#3}% |
| 19375 |
\POE@regNodes{#1}{#3}% |
| 19376 |
\fi |
| 19377 |
\def\opttripole@comp{#4}% |
| 19378 |
\POE@drawcomponent{opttripole}{#5} |
| 19379 |
\ifPOE@backlayer |
| 19380 |
\POE@InternalConn |
| 19381 |
\fi |
| 19382 |
\end@OptexpTripole |
| 19383 |
}% |
| 19384 |
% \end{macrocode} |
| 19385 |
% Only one argument given, decide if this is supposed to be the label, or the component |
| 19386 |
% \begin{macrocode} |
| 19387 |
\def\opttripole@v(#1)(#2)(#3)#4{% |
| 19388 |
\addafter@par{ref@angle=0} |
| 19389 |
\begin@OptexpTripole |
| 19390 |
\ifPOE@backlayer |
| 19391 |
\POE@calcNodes{#1}{#2}{#3}% |
| 19392 |
\POE@regNodes{#1}{#3}% |
| 19393 |
\fi |
| 19394 |
\ifx\POE@key@opttripolecomp\@empty |
| 19395 |
\def\opttripole@comp{#3}% |
| 19396 |
\POE@drawcomponent{opttripole}{}% |
| 19397 |
\else |
| 19398 |
\def\opttripole@comp{\POE@key@opttripolecomp}% |
| 19399 |
\POE@drawcomponent{opttripole}{#4}% |
| 19400 |
\fi |
| 19401 |
\ifPOE@backlayer |
| 19402 |
\POE@InternalConn |
| 19403 |
\fi |
| 19404 |
\end@OptexpTripole |
| 19405 |
}% |
| 19406 |
\def\opttripole@nodes{\POE@tripole@nodes} |
| 19407 |
% \end{macrocode} |
| 19408 |
% \end{macro} |
| 19409 |
% |
| 19410 |
% \begin{macro}{\fibercollimator} |
| 19411 |
% \begin{macrocode} |
| 19412 |
\def\fibercollimator{\pst@object{fibercollimator}} |
| 19413 |
\def\fibercollimator@i(#1)(#2){% |
| 19414 |
\def\POE@tempa{#1}% |
| 19415 |
\def\POE@tempb{#2}% |
| 19416 |
\def\POE@tempc{}% |
| 19417 |
\def\POE@tempd{}% |
| 19418 |
\@ifnextchar(%) |
| 19419 |
{\fibercollimator@ii}{\fibercollimator@iv}% |
| 19420 |
}% |
| 19421 |
\def\fibercollimator@ii(#1){% |
| 19422 |
\def\POE@tempc{#1}% |
| 19423 |
\@ifnextchar(%) |
| 19424 |
{\fibercollimator@iii}{\fibercollimator@iv}% |
| 19425 |
}% |
| 19426 |
\def\fibercollimator@iii(#1){% |
| 19427 |
\def\POE@tempd{#1}% |
| 19428 |
\fibercollimator@iv |
| 19429 |
}% |
| 19430 |
\def\fibercollimator@iv{% |
| 19431 |
\@ifnextchar\bgroup{\fibercollimator@v}{\fibercollimator@v{}}% |
| 19432 |
}% |
| 19433 |
\def\fibercollimator@v#1{% |
| 19434 |
\addbefore@par{allowbeaminside=false}% |
| 19435 |
\begin@OptexpObj |
| 19436 |
\ifPOE@backlayer |
| 19437 |
\POE@regNodes{\POE@tempa}{\POE@tempb}% |
| 19438 |
\fi |
| 19439 |
\POE@drawcomponent{fibercollimator}{#1} |
| 19440 |
\ifPOE@backlayer |
| 19441 |
\ifPOE@beam |
| 19442 |
\drawbeam(\oenodeRefA{}){} |
| 19443 |
\fi |
| 19444 |
\ifPOE@fiberpresetout@ |
| 19445 |
\ifx\@empty\POE@tempc |
| 19446 |
\drawfiber{}(\oenodeRefB{}) |
| 19447 |
\else\ifx\@empty\POE@tempd |
| 19448 |
\psbezier[style=FiberOut](\oenodeOut{})(\POE@tempb)% |
| 19449 |
(\POE@tempb)(\POE@tempc)% |
| 19450 |
\else |
| 19451 |
\psbezier[style=FiberOut](\oenodeOut{})(\POE@tempb)% |
| 19452 |
(\POE@tempc)(\POE@tempd)% |
| 19453 |
\fi\fi |
| 19454 |
\fi |
| 19455 |
\fi |
| 19456 |
\end@OptexpObj |
| 19457 |
}% |
| 19458 |
% \end{macrocode} |
| 19459 |
% \end{macro} |
| 19460 |
% |
| 19461 |
% Define all fiber dipoles |
| 19462 |
% \begin{macrocode} |
| 19463 |
\newOptexpFiberDipole{optfiber}{newOptComp={}} |
| 19464 |
\newOptexpFiberDipole{optamp} |
| 19465 |
\newOptexpFiberDipole{optmzm} |
| 19466 |
\newOptexpFiberDipole{optfilter}{allowbeaminside=false} |
| 19467 |
\newOptexpFiberDipole{polcontrol} |
| 19468 |
\newOptexpFiberDipole{optisolator} |
| 19469 |
\newOptexpFiberDipole{optfiberpolarizer} |
| 19470 |
\newOptexpFiberDipole{optswitch} |
| 19471 |
\newOptexpFiberDipole{fiberdelayline} |
| 19472 |
% \end{macrocode} |
| 19473 |
% |
| 19474 |
% \begin{macro}{\POE@drawcomponent} |
| 19475 |
% This macro is called by every unit |
| 19476 |
% The first parameter contains the label, the second one the drawing code |
| 19477 |
% \begin{macrocode} |
| 19478 |
\def\POE@drawcomponent#1#2{% |
| 19479 |
\def\POE@comp{% |
| 19480 |
\ifPOE@backlayer |
| 19481 |
\pnode(!\POE@dict{@@x0 @@y0}){\oenodeCenter{}} |
| 19482 |
\@nameuse{#1@nodes} |
| 19483 |
\fi |
| 19484 |
\ifPOE@frontlayer |
| 19485 |
\@nameuse{#1@comp} |
| 19486 |
\fi |
| 19487 |
\ifx\POE@key@extnode\@empty\else |
| 19488 |
\ifPOE@backlayer |
| 19489 |
\multido{\i=1+1}{\POE@key@extnode@cnt}{% |
| 19490 |
\pnode(! \POE@dict{ |
| 19491 |
@xref \i\space 1 sub get |
| 19492 |
@yref \i\space 1 sub get |
| 19493 |
DefineExtNode}){\oenode{Ext\i}{}}% |
| 19494 |
\pnode(\oenode{Ext1}{}){\oenodeExt{}}% |
| 19495 |
}% |
| 19496 |
\POE@Verb{% |
| 19497 |
tx@NodeDict begin /N@\oenodeExt{} load |
| 19498 |
\ifnum9<1\POE@key@compname |
| 19499 |
/N@ExtNode |
| 19500 |
\else |
| 19501 |
/N@\POE@key@compname ExtNode |
| 19502 |
\fi |
| 19503 |
ED end |
| 19504 |
}% |
| 19505 |
\fi |
| 19506 |
\fi |
| 19507 |
}% |
| 19508 |
\@ifundefined{#1@ref}{}{\@nameuse{#1@ref}}% |
| 19509 |
\begingroup |
| 19510 |
\ifPOE@endbox |
| 19511 |
\psset[optexp]{abspos={% |
| 19512 |
\POE@dict{% |
| 19513 |
/N@\POE@refnodeA\space @GetCenter \tx@UserCoor |
| 19514 |
/N@\POE@refnodeB\space @GetCenter \tx@UserCoor |
| 19515 |
@ABDist @@x0 @@x add add |
| 19516 |
}% |
| 19517 |
}}% |
| 19518 |
\else\ifPOE@startbox |
| 19519 |
\psset[optexp]{abspos={\POE@dict{ @@x0 neg @@x sub }}}% |
| 19520 |
\fi\fi |
| 19521 |
\POE@disablepos |
| 19522 |
\ncline[linestyle=none,fillstyle=none,npos=,arrows=-,ArrowInside=-]% |
| 19523 |
{\POE@refnodeA}{\POE@refnodeB}% |
| 19524 |
% \end{macrocode} |
| 19525 |
% Positioning of the component |
| 19526 |
% \begin{macrocode} |
| 19527 |
\psset{style=OptComp}% |
| 19528 |
% \end{macrocode} |
| 19529 |
% linestyle to use, if component should be marked as optional |
| 19530 |
% \begin{macrocode} |
| 19531 |
\ifPOE@component@optional |
| 19532 |
\psset{style=OptionalStyle}% |
| 19533 |
\fi |
| 19534 |
% \end{macrocode} |
| 19535 |
% If parameter \opt{position} is given, use it for \opt{npos}. |
| 19536 |
% \begin{macrocode} |
| 19537 |
\ifx\POE@key@abspos\@empty |
| 19538 |
% \end{macrocode} |
| 19539 |
% Then check if absolute positioning with \opt{abspos} is wanted. |
| 19540 |
% \begin{macrocode} |
| 19541 |
\ifx\POE@key@position\@empty |
| 19542 |
\ncput[nrot=:U,npos=]{\POE@putcomp{\POE@comp}}% |
| 19543 |
\else |
| 19544 |
\ncput[nrot=:U,npos=\POE@key@position]{\POE@putcomp{\POE@comp}}% |
| 19545 |
\fi |
| 19546 |
\else |
| 19547 |
\POE@nlput[nrot=:U](\POE@refnodeA)(\POE@refnodeB)% |
| 19548 |
{\POE@key@abspos}{\POE@putcomp{\POE@comp}}% |
| 19549 |
\fi |
| 19550 |
\endgroup |
| 19551 |
\ifPOE@backlayer |
| 19552 |
\POE@transformnodes |
| 19553 |
\fi |
| 19554 |
\ifPOE@frontlayer |
| 19555 |
\POE@putlabel{#2}% |
| 19556 |
\fi |
| 19557 |
% \end{macrocode} |
| 19558 |
% Show some special dots for debugging |
| 19559 |
% \begin{macrocode} |
| 19560 |
\ifPOE@debug@showoptdots |
| 19561 |
\ifPOE@frontlayer |
| 19562 |
\psdot[linecolor=red](\oenodeCenter{}) |
| 19563 |
\psdot[linecolor=red, dotstyle=x, dotscale=1.5](\oenodeLabel{}) |
| 19564 |
\psdot[linecolor=black](\oenodeRefA{}) |
| 19565 |
\psdot[linecolor=black](\oenodeRefB{}) |
| 19566 |
\psdot[linecolor=black, dotstyle=x, |
| 19567 |
dotscale=1.5](\oenodeTrefA{}) |
| 19568 |
\psdot[linecolor=black, dotstyle=x, |
| 19569 |
dotscale=1.5](\oenodeTrefB{}) |
| 19570 |
\fi |
| 19571 |
\fi |
| 19572 |
\ifPOE@debug@showinterfaces |
| 19573 |
\ifPOE@frontlayer |
| 19574 |
\POE@drawinterfaces[style=IfcStyle] |
| 19575 |
\fi |
| 19576 |
\fi |
| 19577 |
\ifPOE@debug@showifcnodes |
| 19578 |
\ifPOE@frontlayer |
| 19579 |
\POE@ifcnodes[style=IfcNodeStyle] |
| 19580 |
\fi |
| 19581 |
\fi |
| 19582 |
\ignorespaces}% |
| 19583 |
% \end{macrocode} |
| 19584 |
% \end{macro} |
| 19585 |
% |
| 19586 |
% \begin{macro}{POE@setref} |
| 19587 |
% \begin{macrocode} |
| 19588 |
\let\POE@setref\POE@Verb |
| 19589 |
% \end{macrocode} |
| 19590 |
% \end{macro} |
| 19591 |
% |
| 19592 |
% \begin{macro}{POE@transformnode} |
| 19593 |
% Transform node \opt{\#1} according to the positioning parameters |
| 19594 |
% (\opt{compshift}, \opt{position}, and \opt{abspos}) with respect to the |
| 19595 |
% rotation reference node and define it as \opt{\#2}. |
| 19596 |
% \begin{macrocode} |
| 19597 |
\def\POE@transformnode#1#2{% |
| 19598 |
\pnode(! |
| 19599 |
\POE@dict{% |
| 19600 |
/N@\oenodeRotref{} @GetCenter 2 copy |
| 19601 |
/N@#1 @GetCenter |
| 19602 |
\POE@key@comp@Xshift\space\POE@key@comp@Yshift\space |
| 19603 |
\tx@ScreenCoor VecAdd 4 2 roll @ABVect |
| 19604 |
\POE@key@angle\space matrix rotate dtransform VecAdd |
| 19605 |
\tx@UserCoor |
| 19606 |
}){#2}% |
| 19607 |
}% |
| 19608 |
% \end{macrocode} |
| 19609 |
% \end{macro} |
| 19610 |
% |
| 19611 |
% \begin{macro}{\POE@ifcnodes} |
| 19612 |
% \begin{macrocode} |
| 19613 |
\def\POE@ifcnodes{\pst@object{POE@ifcnodes}} |
| 19614 |
\def\POE@ifcnodes@i{% |
| 19615 |
\begin@SpecialObj% |
| 19616 |
\solid@star% |
| 19617 |
\addto@pscode{ |
| 19618 |
\psk@dotsize |
| 19619 |
\@nameuse{psds@\psk@dotstyle} |
| 19620 |
\POE@dict{[ (\oenode{}{}) false GetInternalBeamNodes %] |
| 19621 |
counttomark 2 idiv { Dot } repeat |
| 19622 |
pop} |
| 19623 |
}% |
| 19624 |
\end@SpecialObj |
| 19625 |
}% |
| 19626 |
% \end{macrocode} |
| 19627 |
% \end{macro} |
| 19628 |
% |
| 19629 |
% \begin{macro}{\POE@drawinterfaces} |
| 19630 |
% \begin{macrocode} |
| 19631 |
\def\POE@drawinterfaces{\pst@object{POE@drawinterfaces}} |
| 19632 |
\def\POE@drawinterfaces@i{% |
| 19633 |
\begin@OpenObj% |
| 19634 |
\addto@pscode{% |
| 19635 |
\psk@dotsize |
| 19636 |
\@nameuse{psds@\psk@dotstyle} |
| 19637 |
\pst@optexpdict |
| 19638 |
/\oenode{}{} load begin |
| 19639 |
1 1 N { |
| 19640 |
IfcName load begin |
| 19641 |
X Y |
| 19642 |
CompMtrx transform CM itransform 2 copy |
| 19643 |
currentdict /RX known { 0 0 }{ DX DY } ifelse |
| 19644 |
CompMtrx dtransform CM idtransform 2 copy |
| 19645 |
NAlow 0 eq NAup 0 eq and { |
| 19646 |
-0.5 VecScale 4 2 roll 0.5 VecScale |
| 19647 |
} { |
| 19648 |
\tx@UserCoor NAlow VecScale 4 2 roll \tx@UserCoor NAup VecScale |
| 19649 |
} ifelse |
| 19650 |
end |
| 19651 |
8 -2 roll VecAdd moveto VecAdd lineto |
| 19652 |
} for |
| 19653 |
end end }% |
| 19654 |
\pst@stroke |
| 19655 |
\use@pscode |
| 19656 |
\end@OpenObj |
| 19657 |
}% |
| 19658 |
% \end{macrocode} |
| 19659 |
% \end{macro} |
| 19660 |
% |
| 19661 |
% \begin{macro}{POE@extnodes} |
| 19662 |
% \begin{macrocode} |
| 19663 |
\def\POE@extnodes{\pst@object{POE@extnodes}} |
| 19664 |
\def\POE@extnodes@i#1{% |
| 19665 |
\begin@SpecialObj |
| 19666 |
\let\POE@setref\addto@pscode |
| 19667 |
\addto@pscode{\pst@optexpdict InitOptexpComp } |
| 19668 |
\@ifundefined{#1@ref}{}{\@nameuse{#1@ref}}% |
| 19669 |
\solid@star% |
| 19670 |
\addto@pscode{ |
| 19671 |
\psk@dotsize |
| 19672 |
\@nameuse{psds@\psk@dotstyle} |
| 19673 |
@@x 0 eq { [0] }{ [ @@x neg 0 @@x ] } ifelse |
| 19674 |
{ |
| 19675 |
@@y 0 eq { [0] }{ [@@y neg 0 @@y ] } ifelse |
| 19676 |
{ |
| 19677 |
exch dup 3 1 roll |
| 19678 |
@@x0 add exch @@y0 add \tx@ScreenCoor |
| 19679 |
/\oenode{}{} load begin CompMtrx end transform CM itransform |
| 19680 |
Dot |
| 19681 |
} forall |
| 19682 |
pop |
| 19683 |
} forall |
| 19684 |
end |
| 19685 |
}% |
| 19686 |
\end@SpecialObj |
| 19687 |
}% |
| 19688 |
% \end{macrocode} |
| 19689 |
% \end{macro} |
| 19690 |
% |
| 19691 |
% \begin{macro}{\POE@tripole@nodes} |
| 19692 |
% \begin{macrocode} |
| 19693 |
\def\POE@tripole@nodes{% |
| 19694 |
\newOptexpComp{{0 0} {1 0} @@x neg @@x refl {PlainIfc} 1}% |
| 19695 |
\ignorespaces}% |
| 19696 |
% \end{macrocode} |
| 19697 |
% \end{macro} |
| 19698 |
% |
| 19699 |
% \begin{macro}{\POE@dipole@nodes} |
| 19700 |
% \begin{macrocode} |
| 19701 |
\def\POE@dipole@nodes{% |
| 19702 |
\newOptexpComp{% |
| 19703 |
{@@x0 @@x sub 0} {0 1} @@y0 @@y sub @@y0 @@y add trans {PlainIfc} |
| 19704 |
@@x 0 eq not { |
| 19705 |
{@@x0 @@x add 0} {0 1} @@y0 @@y sub @@y0 @@y add trans {PlainIfc} |
| 19706 |
} if \POE@key@n }% |
| 19707 |
\ignorespaces}% |
| 19708 |
% \end{macrocode} |
| 19709 |
% \end{macro} |
| 19710 |
% |
| 19711 |
% \begin{macro}{POE@fiberdipole@nodes} |
| 19712 |
% \begin{macrocode} |
| 19713 |
\def\POE@fiberdipole@nodes{% |
| 19714 |
\newOptexpFiberComp{% |
| 19715 |
{@@x0 @@x sub 0} |
| 19716 |
@@x 0 eq not { |
| 19717 |
{@@x0 @@x add 0} |
| 19718 |
} if }% |
| 19719 |
\ignorespaces}% |
| 19720 |
% \end{macrocode} |
| 19721 |
% \end{macro} |
| 19722 |
% |
| 19723 |
% \begin{macrocode} |
| 19724 |
\let\POE@elecdipole@nodes\POE@fiberdipole@nodes |
| 19725 |
% \end{macrocode} |
| 19726 |
% |
| 19727 |
% \begin{macro}{POE@comp@rectangle} |
| 19728 |
% \begin{macrocode} |
| 19729 |
\def\POE@comp@rectangle{% |
| 19730 |
\psframe[dimen=outer](!\POE@dict{@@x neg @@y0 @@y sub})% |
| 19731 |
(!\POE@dict{@@x @@y0 @@y add})% |
| 19732 |
}% |
| 19733 |
% \end{macrocode} |
| 19734 |
% \end{macro} |
| 19735 |
% |
| 19736 |
% \subsection{Free-ray components} |
| 19737 |
% |
| 19738 |
% \subsubsection{mirror} |
| 19739 |
% |
| 19740 |
% \begin{macro}{\mirror@ref} |
| 19741 |
% \begin{macrocode} |
| 19742 |
\def\mirror@ref{% |
| 19743 |
\ifdim\POE@key@mirrorradius pt=0pt |
| 19744 |
\ifx\POE@key@mirrortype\POE@str@piezo |
| 19745 |
\POE@setref{/@@y0 \pst@number\psyunit def}% |
| 19746 |
\bgroup |
| 19747 |
\psset{style=PiezoMirror}% |
| 19748 |
\POE@setref{% |
| 19749 |
\pst@number\psyunit @@y0 div |
| 19750 |
\POE@key@mirrorwidth\space 0.5 mul mul 2.5 div /@@y0 ED |
| 19751 |
}% |
| 19752 |
\egroup |
| 19753 |
\else |
| 19754 |
\POE@setref{/@@x \POE@key@mirrorwidth\space 0.5 mul def}% |
| 19755 |
\ifx\POE@key@mirrortype\POE@str@plain\else |
| 19756 |
\POE@setref{\POE@key@mirrordepth\space 0.5 mul dup /@@y0 ED /@@y ED}% |
| 19757 |
\fi |
| 19758 |
\fi |
| 19759 |
\else |
| 19760 |
\POE@setref{/@@x \POE@key@mirrorwidth\space 0.5 mul def}% |
| 19761 |
\ifx\POE@key@mirrortype\POE@str@plain\else |
| 19762 |
\POE@setref{\POE@key@mirrordepth\space 0.5 mul dup /@@y0 ED /@@y ED}% |
| 19763 |
\fi |
| 19764 |
\fi |
| 19765 |
}% |
| 19766 |
% \end{macrocode} |
| 19767 |
% \end{macro} |
| 19768 |
% |
| 19769 |
% \begin{macro}{\mirror@nodes} |
| 19770 |
% \begin{macrocode} |
| 19771 |
\def\mirror@nodes{% |
| 19772 |
\begin@CompIfc |
| 19773 |
% \end{macrocode} |
| 19774 |
% Add this one reflective interface in any case |
| 19775 |
% \begin{macrocode} |
| 19776 |
\ifdim\POE@key@mirrorradius pt=0pt |
| 19777 |
\addto@pscode{% |
| 19778 |
{0 0} {1 0} |
| 19779 |
\POE@key@mirrorwidth\space -0.5 mul dup neg |
| 19780 |
refl {PlainIfc} }% |
| 19781 |
\else |
| 19782 |
\addto@pscode{% |
| 19783 |
{0 0} {0 \POE@key@mirrorradius\space neg} |
| 19784 |
\POE@key@mirrorwidth\space -0.5 mul dup neg |
| 19785 |
refl {CurvedIfc} }% |
| 19786 |
\fi |
| 19787 |
% \end{macrocode} |
| 19788 |
% A second interface exists only for semitrans mirrors |
| 19789 |
% \begin{macrocode} |
| 19790 |
\ifx\POE@key@mirrortype\POE@str@semitrans |
| 19791 |
% \end{macrocode} |
| 19792 |
% if no second mirror radius was specified, use the same curvature of the first interface. |
| 19793 |
% \begin{macrocode} |
| 19794 |
\ifx\POE@key@mirrorradiusB\@empty |
| 19795 |
\ifdim\POE@key@mirrorradius pt=0pt |
| 19796 |
\addto@pscode{% |
| 19797 |
{0 \POE@key@mirrordepth} {1 0} |
| 19798 |
@@x neg @@x trans {PlainIfc} }% |
| 19799 |
\else |
| 19800 |
\addto@pscode{% |
| 19801 |
{0 \POE@key@mirrordepth} |
| 19802 |
{0 \POE@key@mirrorradius\space neg} |
| 19803 |
\POE@key@mirrorwidth\space -0.5 mul dup neg |
| 19804 |
trans {CurvedIfc} }% |
| 19805 |
\fi |
| 19806 |
\else |
| 19807 |
% \end{macrocode} |
| 19808 |
% the second interface is plain if it should not have the curvature of the first interface. |
| 19809 |
% \begin{macrocode} |
| 19810 |
\addto@pscode{% |
| 19811 |
{0 \POE@key@mirrordepth |
| 19812 |
dup \POE@key@mirrorradius\space mul 0 lt { |
| 19813 |
dup sign \POE@key@mirrorradius\space @@x capHeight mul add |
| 19814 |
} if} |
| 19815 |
{1 0} @@x neg @@x trans {PlainIfc} }% |
| 19816 |
\fi |
| 19817 |
% \end{macrocode} |
| 19818 |
% Rearrange the two interfaces depending on the sign of mirrordepth |
| 19819 |
% \begin{macrocode} |
| 19820 |
\addto@pscode{% |
| 19821 |
\ifdim\POE@key@mirrordepth pt<-0.0001pt |
| 19822 |
12 6 roll 2 |
| 19823 |
\else |
| 19824 |
\ifdim\POE@key@mirrordepth pt< 0.0001pt |
| 19825 |
6 {pop} repeat |
| 19826 |
\fi |
| 19827 |
1 |
| 19828 |
\fi |
| 19829 |
\POE@key@n |
| 19830 |
}% |
| 19831 |
\end@AmbCompIfc |
| 19832 |
\else |
| 19833 |
\addto@pscode{1 }% |
| 19834 |
\end@CompIfc |
| 19835 |
\fi |
| 19836 |
\pnode(0,0){\oenodeCenter{}} |
| 19837 |
}% |
| 19838 |
% \end{macrocode} |
| 19839 |
% \end{macro} |
| 19840 |
% |
| 19841 |
% \begin{macro}{\mirror@comp} |
| 19842 |
% \begin{macrocode} |
| 19843 |
\def\mirror@comp{% |
| 19844 |
\edef\@ht{% |
| 19845 |
\POE@key@mirrorwidth\space\pst@number\psyunit mul 0.5 mul % |
| 19846 |
}% |
| 19847 |
\edef\@dp{\POE@key@mirrordepth\space\pst@number\psxunit mul }% |
| 19848 |
\edef\@r{\POE@key@mirrorradius\space\pst@number\psxunit mul }% |
| 19849 |
\edef\@postcode{% |
| 19850 |
neg 5 -1 roll exch 5 2 roll 90 add exch 90 add exch ArcR % |
| 19851 |
}% |
| 19852 |
\edef\@extpostcode{% |
| 19853 |
neg \@dp add 5 -1 roll exch 5 2 roll 90 add exch 90 add % |
| 19854 |
}% |
| 19855 |
\ifdim\POE@key@mirrorradius pt=0pt |
| 19856 |
% \end{macrocode} |
| 19857 |
% plain mirror |
| 19858 |
% \begin{macrocode} |
| 19859 |
\edef\@ht{\POE@key@mirrorwidth\space 0.5 mul }% |
| 19860 |
\ifx\POE@key@mirrortype\POE@str@piezo |
| 19861 |
\psframe[style=PiezoMirror, |
| 19862 |
dimen=outer](! \@ht 4 div 0)% |
| 19863 |
(! \@ht -4 div \@ht 2.5 div) |
| 19864 |
\ifx\POE@key@extnode\@empty |
| 19865 |
\psbezier[fillstyle=none](! 0 \@ht 2.5 div)% |
| 19866 |
(! 0 \@ht 1.5 div)% |
| 19867 |
(! \@ht 2 div \@ht 2 div)% |
| 19868 |
(! \@ht 4 div \@ht) |
| 19869 |
\fi |
| 19870 |
\else\ifx\POE@key@mirrortype\POE@str@extended |
| 19871 |
\psframe[style=ExtendedMirror]% |
| 19872 |
(! \@ht neg \POE@key@mirrordepth\space )% |
| 19873 |
(! \@ht 0) |
| 19874 |
\else\ifx\POE@key@mirrortype\POE@str@semitrans |
| 19875 |
\psframe[style=SemitransMirror]% |
| 19876 |
(! \@ht neg \POE@key@mirrordepth\space )% |
| 19877 |
(! \@ht 0) |
| 19878 |
\fi\fi\fi |
| 19879 |
\ifx\POE@key@mirrortype\POE@str@semitrans |
| 19880 |
\psline[linewidth=\POE@key@mirrorlinewidth]% |
| 19881 |
(! \@ht neg 0)(! \@ht 0) |
| 19882 |
\else |
| 19883 |
\psline[linewidth=\POE@key@mirrorlinewidth]% |
| 19884 |
(! \@ht neg \POE@clwh)(! \@ht \POE@clwh) |
| 19885 |
\fi |
| 19886 |
\else |
| 19887 |
% \end{macrocode} |
| 19888 |
% concave/convex mirror |
| 19889 |
% \begin{macrocode} |
| 19890 |
\ifdim\POE@key@mirrorradius pt<0pt |
| 19891 |
\def\POE@temparc{arc } |
| 19892 |
\else |
| 19893 |
\def\POE@temparc{arcn } |
| 19894 |
\fi |
| 19895 |
\ifodd |
| 19896 |
\ifx\POE@key@mirrortype\POE@str@extended 1 |
| 19897 |
\else\ifx\POE@key@mirrortype\POE@str@semitrans 1 |
| 19898 |
\else 0 |
| 19899 |
\fi\fi |
| 19900 |
% \end{macrocode} |
| 19901 |
% extended or semitrans mirrortype |
| 19902 |
% \begin{macrocode} |
| 19903 |
\bgroup |
| 19904 |
\ifx\POE@key@mirrortype\POE@str@extended |
| 19905 |
\psset{style=ExtendedMirror} |
| 19906 |
\else\ifx\POE@key@mirrortype\POE@str@semitrans |
| 19907 |
\psset{style=SemitransMirror} |
| 19908 |
\fi\fi |
| 19909 |
\begin@ClosedObj |
| 19910 |
\addto@pscode{% |
| 19911 |
\pst@optexpdict \@ht \@r rightCurvedIfc \@postcode |
| 19912 |
\ifx\POE@key@mirrorradiusB\@empty |
| 19913 |
\@ht \@r rightCurvedIfc \@extpostcode \POE@temparc |
| 19914 |
\else |
| 19915 |
0 \@dp |
| 19916 |
% \end{macrocode} |
| 19917 |
% For positive mirrorradius and positive mirror depth, add the cap |
| 19918 |
% height so that mirrordepth is the minimum mirror depth. For both |
| 19919 |
% negative radius and depth, subtract the cap height. |
| 19920 |
% \begin{macrocode} |
| 19921 |
\POE@key@mirrordepth\space\POE@key@mirrorradius\space |
| 19922 |
mul 0 gt { |
| 19923 |
dup sign \@r \@ht capHeight mul add |
| 19924 |
} if |
| 19925 |
rlineto 2 \@ht mul 0 rlineto |
| 19926 |
\fi |
| 19927 |
closepath end}% |
| 19928 |
\end@ClosedObj |
| 19929 |
\egroup |
| 19930 |
\fi |
| 19931 |
% \end{macrocode} |
| 19932 |
% draw the reflective interface |
| 19933 |
% \begin{macrocode} |
| 19934 |
\bgroup |
| 19935 |
\psset{linewidth=\POE@key@mirrorlinewidth, fillstyle=none} |
| 19936 |
\begin@OpenObj |
| 19937 |
\addto@pscode{\POE@dict{ \@ht \@r rightCurvedIfc \@postcode }}% |
| 19938 |
\end@OpenObj |
| 19939 |
\egroup |
| 19940 |
\fi |
| 19941 |
\ifPOE@variable |
| 19942 |
\psarc[style=VariableStyle]% |
| 19943 |
(! \POE@key@mirrorwidth\space 0.5 mul 0.4 sub |
| 19944 |
\ifdim\POE@key@mirrorradius pt=0pt |
| 19945 |
0 |
| 19946 |
\else |
| 19947 |
\POE@key@mirrorradius\space dup \POE@dict{sign} neg exch |
| 19948 |
\POE@key@mirrorwidth\space 0.5 mul \POE@dict{capHeight} mul |
| 19949 |
\fi){0.6}{-20}{20} |
| 19950 |
\psarc[style=VariableStyle]% |
| 19951 |
(! 0.4 \POE@key@mirrorwidth\space 0.5 mul sub |
| 19952 |
\ifdim\POE@key@mirrorradius pt=0pt |
| 19953 |
0 |
| 19954 |
\else |
| 19955 |
\POE@key@mirrorradius\space dup \POE@dict{sign} neg exch |
| 19956 |
\POE@key@mirrorwidth\space 0.5 mul \POE@dict{capHeight} mul |
| 19957 |
\fi){0.6}{160}{200} |
| 19958 |
\fi |
| 19959 |
}% |
| 19960 |
% \end{macrocode} |
| 19961 |
% \end{macro} |
| 19962 |
% |
| 19963 |
% \subsubsection{parabolicmirror} |
| 19964 |
% |
| 19965 |
% \begin{macro}{\parabolicmirror@nodes} |
| 19966 |
% \begin{macrocode} |
| 19967 |
\def\parabolicmirror@nodes{% |
| 19968 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{A}}{% |
| 19969 |
\parametricplot[algebraic, VarStep, VarStepEpsilon=1e-7, plotstyle=cspline]% |
| 19970 |
{0}{\POE@key@parmirrorheight\space 0.5 mul}% |
| 19971 |
{-\POE@key@parmirrorwidth/(0.25*\POE@key@parmirrorheight^2)*t^2|-t}} |
| 19972 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{B}}{% |
| 19973 |
\parametricplot[algebraic, VarStep, VarStepEpsilon=1e-7, plotstyle=cspline]% |
| 19974 |
{0}{\POE@key@parmirrorheight\space 0.5 mul}% |
| 19975 |
{-\POE@key@parmirrorwidth/(0.25*\POE@key@parmirrorheight^2)*t^2|t}} |
| 19976 |
\newOptexpComp{% |
| 19977 |
{-\POE@key@parmirrorwidth\space 0.16 mul \POE@key@parmirrorheight\space -0.2 mul} |
| 19978 |
tx@IntersectDict /\PIT@name{\oenode@Path{A}} get 0 0 refl {PathIfc} |
| 19979 |
{0 0} {1 0} 0 0 trans {PlainIfc} |
| 19980 |
{-\POE@key@parmirrorwidth\space 0.16 mul \POE@key@parmirrorheight\space 0.2 mul} |
| 19981 |
tx@IntersectDict /\PIT@name{\oenode@Path{B}} get 0 0 refl {PathIfc} |
| 19982 |
1 }% |
| 19983 |
\ignorespaces}% |
| 19984 |
% \end{macrocode} |
| 19985 |
% \end{macro} |
| 19986 |
% |
| 19987 |
% \begin{macro}{\parabolicmirror@comp} |
| 19988 |
% \begin{macrocode} |
| 19989 |
\def\parabolicmirror@comp{% |
| 19990 |
\pstracecurve{\oenode@Path{A}} |
| 19991 |
\pstracecurve{\oenode@Path{B}} |
| 19992 |
\ignorespaces} |
| 19993 |
% \end{macrocode} |
| 19994 |
% \end{macro} |
| 19995 |
% |
| 19996 |
% \subsubsection{lens} |
| 19997 |
% |
| 19998 |
% \begin{macro}{\lens@ref} |
| 19999 |
% \begin{macrocode} |
| 20000 |
\def\lens@ref{% |
| 20001 |
\ifdim\POE@key@lensradiusleft pt=0pt |
| 20002 |
\edef\@th{0 }% |
| 20003 |
\else |
| 20004 |
\edef\@th{% |
| 20005 |
\ifPOE@thicklens |
| 20006 |
\POE@key@lenswidth\space 0.5 mul |
| 20007 |
\else |
| 20008 |
\ifdim\POE@key@lensradiusleft pt<0pt |
| 20009 |
\POE@key@lensheight\space 0.075 mul |
| 20010 |
\else |
| 20011 |
\POE@key@lensradiusleft |
| 20012 |
\POE@key@lensheight\space 0.5 mul capHeight |
| 20013 |
\fi |
| 20014 |
\fi |
| 20015 |
\space}% |
| 20016 |
\fi |
| 20017 |
\ifdim\POE@key@lensradiusright pt=0pt\else |
| 20018 |
\edef\@th{% |
| 20019 |
\@th\space |
| 20020 |
\ifPOE@thicklens |
| 20021 |
\POE@key@lenswidth\space 0.5 mul |
| 20022 |
\else |
| 20023 |
\ifdim\POE@key@lensradiusright pt<0pt |
| 20024 |
\POE@key@lensheight\space 0.075 mul |
| 20025 |
\else |
| 20026 |
\POE@key@lensradiusright |
| 20027 |
\POE@key@lensheight\space 0.5 mul capHeight |
| 20028 |
\fi |
| 20029 |
\fi |
| 20030 |
\space add |
| 20031 |
\space}% |
| 20032 |
\fi |
| 20033 |
\POE@setref{% |
| 20034 |
/@@y \POE@key@lensheight\space 0.5 mul def |
| 20035 |
/@@x \@th 0.5 mul def |
| 20036 |
}% |
| 20037 |
}% |
| 20038 |
% \end{macrocode} |
| 20039 |
% \end{macro} |
| 20040 |
% |
| 20041 |
% \begin{macro}{\lens@nodes} |
| 20042 |
% \begin{macrocode} |
| 20043 |
\def\lens@nodes{% |
| 20044 |
\newOptexpComp{% |
| 20045 |
{@@x neg 0} |
| 20046 |
\ifdim\POE@key@lensradiusleft pt=0pt |
| 20047 |
{0 1} |
| 20048 |
\POE@key@lensheight\space -0.5 mul dup neg |
| 20049 |
trans {PlainIfc} |
| 20050 |
\else |
| 20051 |
{\POE@key@lensradiusleft\space 0} |
| 20052 |
\POE@key@lensheight\space -0.5 mul dup neg |
| 20053 |
trans {CurvedIfc} |
| 20054 |
\fi |
| 20055 |
{@@x 0} |
| 20056 |
\ifdim\POE@key@lensradiusright pt=0pt |
| 20057 |
{0 1} |
| 20058 |
\POE@key@lensheight\space -0.5 mul dup neg |
| 20059 |
trans {PlainIfc} |
| 20060 |
\else |
| 20061 |
{\POE@key@lensradiusright\space neg 0} |
| 20062 |
\POE@key@lensheight\space -0.5 mul dup neg |
| 20063 |
trans {CurvedIfc} |
| 20064 |
\fi |
| 20065 |
\POE@key@n |
| 20066 |
}% |
| 20067 |
}% |
| 20068 |
% \end{macrocode} |
| 20069 |
% \end{macro} |
| 20070 |
% |
| 20071 |
% \begin{macro}{\lens@comp} |
| 20072 |
% \begin{macrocode} |
| 20073 |
\def\lens@comp{% |
| 20074 |
\addbefore@par{linejoin=1}% |
| 20075 |
\begin@ClosedObj |
| 20076 |
\addto@pscode{\pst@optexpdict }% |
| 20077 |
\def\@th{0}% |
| 20078 |
\def\@wd{\POE@key@lenswidth\space\pst@number\psxunit mul 2 div }% |
| 20079 |
\def\@ht{\POE@key@lensheight\space\pst@number\psyunit mul 2 div }% |
| 20080 |
\def\@rL{\POE@key@lensradiusleft\space\pst@number\psrunit mul }% |
| 20081 |
\def\@rR{\POE@key@lensradiusright\space\pst@number\psrunit mul }% |
| 20082 |
\ifdim\POE@key@lensradiusleft pt=0pt\else |
| 20083 |
\addto@pscode{ \@ht \@rL leftCurvedIfc }% |
| 20084 |
\fi |
| 20085 |
\ifdim\POE@key@lensradiusright pt=0pt\else |
| 20086 |
\addto@pscode{ \@ht \@rR rightCurvedIfc }% |
| 20087 |
\fi |
| 20088 |
\def\@@x{@@x \pst@number\psxunit mul }% |
| 20089 |
% \end{macrocode} |
| 20090 |
% Check some special cases: |
| 20091 |
% |
| 20092 |
% 1) Left is plain - right concave / convex |
| 20093 |
% \begin{macrocode} |
| 20094 |
\ifdim\POE@key@lensradiusleft pt=0pt |
| 20095 |
\ifdim\POE@key@lensradiusright pt=0pt\else |
| 20096 |
\addto@pscode{% |
| 20097 |
\@@x sub neg 5 1 roll |
| 20098 |
\@@x neg \@ht neg moveto ArcR |
| 20099 |
\@@x neg \@ht lineto |
| 20100 |
}% |
| 20101 |
\fi |
| 20102 |
\fi |
| 20103 |
% \end{macrocode} |
| 20104 |
% 2) Right is plain - left concave / convex |
| 20105 |
% \begin{macrocode} |
| 20106 |
\ifdim\POE@key@lensradiusright pt=0pt |
| 20107 |
\ifdim\POE@key@lensradiusleft pt=0pt\else |
| 20108 |
\addto@pscode{% |
| 20109 |
\@@x sub 5 1 roll |
| 20110 |
\@@x \@ht moveto ArcL |
| 20111 |
\@@x \@ht neg lineto |
| 20112 |
}% |
| 20113 |
\fi |
| 20114 |
\fi |
| 20115 |
% \end{macrocode} |
| 20116 |
% 3) right and left are both curved |
| 20117 |
% \begin{macrocode} |
| 20118 |
\ifdim\POE@key@lensradiusright pt=0pt\else |
| 20119 |
\ifdim\POE@key@lensradiusleft pt=0pt\else |
| 20120 |
\addto@pscode{% |
| 20121 |
\@@x dup |
| 20122 |
7 1 roll sub neg 5 1 roll |
| 20123 |
ArcR sub 5 1 roll ArcL |
| 20124 |
}% |
| 20125 |
\fi |
| 20126 |
\fi |
| 20127 |
\addto@pscode{closepath 1 setlinejoin end }% |
| 20128 |
\end@ClosedObj |
| 20129 |
\ignorespaces}% |
| 20130 |
% \end{macrocode} |
| 20131 |
% \end{macro} |
| 20132 |
% |
| 20133 |
% \subsubsection{Aspheric lens} |
| 20134 |
% |
| 20135 |
% \begin{macro}{\asphericlens@nodes} |
| 20136 |
% \begin{macrocode} |
| 20137 |
\def\asphericlens@nodes{% |
| 20138 |
\def\POE@asphere##1{% |
| 20139 |
(##1)^2*(1/(\POE@key@asphereradiusleft*(1+sqrt(1-(1+\POE@key@asphereconstant)*(##1)^2/\POE@key@asphereradiusleft^2)))+% |
| 20140 |
(##1)^2*(\POE@key@asphereAfour % |
| 20141 |
+ (##1)^2*(\POE@key@asphereAsix % |
| 20142 |
+ ((##1)^2*(\POE@key@asphereAeight % |
| 20143 |
+ \POE@key@asphereAten*(##1)^2)))))}% |
| 20144 |
\def\POE@arcright##1{% |
| 20145 |
(##1)^2/(\POE@key@asphereradiusright*sqrt(1-(##1)^2/\POE@key@asphereradiusright^2))}% |
| 20146 |
\POE@Verb{% |
| 20147 |
tx@Dict begin |
| 20148 |
/POEasphereleftx0 (\POE@asphere{0.5*\POE@key@asphereheight}) AlgParser cvx exec def |
| 20149 |
/POEasphererightx0 |
| 20150 |
\ifdim\POE@key@asphereradiusright pt>0pt |
| 20151 |
(\POE@arcright{0.5*\POE@key@asphereheight}) AlgParser cvx exec |
| 20152 |
\else |
| 20153 |
0 |
| 20154 |
\fi |
| 20155 |
def |
| 20156 |
\POE@key@aspherewidth\space POEasphereleftx0 POEasphererightx0 add sub dup 0 gt { |
| 20157 |
POEasphererightx0 add /POEasphererightx0 exch def |
| 20158 |
} { |
| 20159 |
pop |
| 20160 |
} ifelse |
| 20161 |
end |
| 20162 |
}% |
| 20163 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{A}}{% |
| 20164 |
\psparametricplot[algebraic, plotstyle=cspline]% |
| 20165 |
{\POE@key@asphereheight\space -0.5 mul}% |
| 20166 |
{\POE@key@asphereheight\space 0.5 mul}% |
| 20167 |
{\POE@asphere{t}-POEasphereleftx0|t}}% |
| 20168 |
\ifdim\POE@key@asphereradiusright pt>0pt |
| 20169 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{B}}{% |
| 20170 |
\psparametricplot[algebraic, plotstyle=cspline]% |
| 20171 |
{\POE@key@asphereheight\space 0.5 mul}% |
| 20172 |
{\POE@key@asphereheight\space -0.5 mul}% |
| 20173 |
{-\POE@arcright{t}+POEasphererightx0|t}}% |
| 20174 |
\fi |
| 20175 |
\newOptexpComp{% |
| 20176 |
{POEasphereleftx0 neg 0} tx@IntersectDict /\PIT@name{\oenode@Path{A}} get 0 0 trans {PathIfc} |
| 20177 |
{POEasphererightx0 0} |
| 20178 |
\ifdim\POE@key@asphereradiusright pt>0pt |
| 20179 |
tx@IntersectDict /\PIT@name{\oenode@Path{B}} get 0 0 trans {PathIfc} |
| 20180 |
\else |
| 20181 |
{0 1} 0 0 trans {PlainIfc} |
| 20182 |
\fi |
| 20183 |
\POE@key@n }% |
| 20184 |
}% |
| 20185 |
% \end{macrocode} |
| 20186 |
% \end{macro} |
| 20187 |
% |
| 20188 |
% \begin{macro}{\asphericlens@comp} |
| 20189 |
% \begin{macrocode} |
| 20190 |
\def\asphericlens@comp{% |
| 20191 |
\pscustom[arrows=-]{% |
| 20192 |
\pstracecurve{\oenode@Path{A}}% |
| 20193 |
\ifdim\POE@key@asphereradiusright pt>0pt |
| 20194 |
\pstracecurve{\oenode@Path{B}} |
| 20195 |
\else |
| 20196 |
\lineto(!POEasphererightx0 \POE@key@asphereheight\space 0.5 mul) |
| 20197 |
\lineto(!POEasphererightx0 \POE@key@asphereheight\space -0.5 mul) |
| 20198 |
\fi |
| 20199 |
\closepath}% |
| 20200 |
}% |
| 20201 |
% \end{macrocode} |
| 20202 |
% \end{macro} |
| 20203 |
% |
| 20204 |
% \subsubsection{pinhole} |
| 20205 |
% |
| 20206 |
% \begin{macro}{\pinhole@ref} |
| 20207 |
% \begin{macrocode} |
| 20208 |
\def\pinhole@ref{% |
| 20209 |
\POE@setref{/@@y \POE@key@outerheight\space 0.5 mul def}% |
| 20210 |
\ignorespaces}% |
| 20211 |
% \end{macrocode} |
| 20212 |
% \end{macro} |
| 20213 |
% |
| 20214 |
% \begin{macro}{\pinhole@nodes} |
| 20215 |
% \begin{macrocode} |
| 20216 |
\def\pinhole@nodes{% |
| 20217 |
\newOptexpComp{% |
| 20218 |
{-1e-4 0} {0 1} @@y0 @@y sub @@y0 @@y add trans {PlainIfc} |
| 20219 |
{0 0} {0 1} \POE@key@innerheight\space -0.5 mul dup neg |
| 20220 |
trans {PlainIfc} |
| 20221 |
{1e-4 0} {0 1} @@y0 @@y sub @@y0 @@y add trans {PlainIfc} |
| 20222 |
\POE@key@n }% |
| 20223 |
\ignorespaces}% |
| 20224 |
% \end{macrocode} |
| 20225 |
% \end{macro} |
| 20226 |
% |
| 20227 |
% \begin{macro}{\pinhole@comp} |
| 20228 |
% \begin{macrocode} |
| 20229 |
\def\pinhole@comp{% |
| 20230 |
\ifdim\POE@key@phwidth pt=0pt |
| 20231 |
\psline[linewidth=\POE@key@phlinewidth]% |
| 20232 |
(! 0 \POE@key@outerheight\space 2 div)% |
| 20233 |
(! 0 \POE@key@innerheight\space 2 div)% |
| 20234 |
\psline[linewidth=\POE@key@phlinewidth]% |
| 20235 |
(! 0 \POE@key@outerheight\space -2 div)% |
| 20236 |
(! 0 \POE@key@innerheight\space -2 div)% |
| 20237 |
\else |
| 20238 |
\pspolygon*[linestyle=none]% |
| 20239 |
(! 0 \POE@key@innerheight\space 2 div)% |
| 20240 |
(! 0 \POE@key@outerheight\space 2 div)% |
| 20241 |
(! \POE@key@phwidth\space\POE@key@outerheight\space 2 div)% |
| 20242 |
(! \POE@key@phwidth\space\POE@key@innerheight\space dup neg |
| 20243 |
\POE@key@outerheight\space add 2 div add 2 div)% |
| 20244 |
\pspolygon*[linestyle=none]% |
| 20245 |
(! 0 \POE@key@innerheight\space -2 div)% |
| 20246 |
(! 0 \POE@key@outerheight\space -2 div)% |
| 20247 |
(! \POE@key@phwidth\space\POE@key@outerheight\space -2 div)% |
| 20248 |
(! \POE@key@phwidth\space\POE@key@innerheight\space dup neg |
| 20249 |
\POE@key@outerheight\space add 2 div add -2 div)% |
| 20250 |
\fi |
| 20251 |
\ignorespaces}% |
| 20252 |
% \end{macrocode} |
| 20253 |
% \end{macro} |
| 20254 |
% |
| 20255 |
% \subsubsection{beamsplitter} |
| 20256 |
% |
| 20257 |
% \begin{macro}{\beamsplitter@ref} |
| 20258 |
% \begin{macrocode} |
| 20259 |
\def\beamsplitter@ref{% |
| 20260 |
\POE@setref{/@@x \POE@key@bssize\space 0.5 sqrt mul def }% |
| 20261 |
}% |
| 20262 |
% \begin{macro}{\beamsplitter@nodes} |
| 20263 |
% \begin{macrocode} |
| 20264 |
\def\beamsplitter@nodes{% |
| 20265 |
\edef\@bs@wd{\POE@key@bssize\space 0.5 mul }% |
| 20266 |
\ifx\POE@key@bsstyle\POE@str@cube |
| 20267 |
\newOptexpCompAmb{% |
| 20268 |
{\@bs@wd 2 sqrt div neg dup} {-1 1} \@bs@wd neg \@bs@wd |
| 20269 |
trans {PlainIfc} |
| 20270 |
{\@bs@wd 2 sqrt div dup neg} {1 1} \@bs@wd neg \@bs@wd |
| 20271 |
trans {PlainIfc} |
| 20272 |
{0 0} {1 0} \@bs@wd 2 sqrt mul dup neg exch |
| 20273 |
trans {PlainIfc} |
| 20274 |
{\@bs@wd 2 sqrt div dup} {-1 1} \@bs@wd neg \@bs@wd |
| 20275 |
trans {PlainIfc} |
| 20276 |
{\@bs@wd 2 sqrt div neg dup neg} {1 1} \@bs@wd neg \@bs@wd |
| 20277 |
trans {PlainIfc} |
| 20278 |
3 \POE@key@n |
| 20279 |
}% |
| 20280 |
\else\ifx\POE@key@bsstyle\POE@str@plate |
| 20281 |
\newOptexpCompAmb{% |
| 20282 |
{0 0} {1 0} \@bs@wd neg \@bs@wd trans {PlainIfc} 1 1 }% |
| 20283 |
\fi\fi |
| 20284 |
\ignorespaces}% |
| 20285 |
% \end{macrocode} |
| 20286 |
% \end{macro} |
| 20287 |
% |
| 20288 |
% \begin{macro}{\beamsplitter@comp} |
| 20289 |
% \begin{macrocode} |
| 20290 |
\def\beamsplitter@comp{% |
| 20291 |
\edef\@bs@wd{\POE@key@bssize\space 2.0 div }% |
| 20292 |
\ifx\POE@key@bsstyle\POE@str@cube |
| 20293 |
\psline[arrows=cc-cc](! \@bs@wd neg 2 sqrt mul 0) |
| 20294 |
(! \@bs@wd 2 sqrt mul 0) |
| 20295 |
\rput[c]{45}(0,0){% |
| 20296 |
\psframe(! \@bs@wd neg \@bs@wd neg)(! \@bs@wd \@bs@wd) |
| 20297 |
} |
| 20298 |
\else\ifx\POE@key@bsstyle\POE@str@plate |
| 20299 |
\psline(! \@bs@wd neg 2 sqrt mul 0)(! \@bs@wd 2 sqrt mul 0) |
| 20300 |
\fi\fi |
| 20301 |
\ignorespaces}% |
| 20302 |
% \end{macrocode} |
| 20303 |
% \end{macro} |
| 20304 |
% |
| 20305 |
% \subsubsection{crystal} |
| 20306 |
% |
| 20307 |
% \begin{macro}{\crystal@ref} |
| 20308 |
% \begin{macrocode} |
| 20309 |
\def\crystal@ref{% |
| 20310 |
\let\POE@key@optboxwidth\POE@key@crystalwidth |
| 20311 |
\let\POE@key@optboxheight\POE@key@crystalheight |
| 20312 |
\optbox@ref |
| 20313 |
}% |
| 20314 |
% \end{macrocode} |
| 20315 |
% \end{macro} |
| 20316 |
% |
| 20317 |
% \begin{macro}{\crystal@comp} |
| 20318 |
% \begin{macrocode} |
| 20319 |
\def\crystal@comp{% |
| 20320 |
\edef\@wd{\POE@key@crystalwidth\space 0.5 mul } |
| 20321 |
\edef\@ht{\POE@key@crystalheight\space 0.5 mul } |
| 20322 |
\psframe(! \@wd neg \@ht neg)(! \@wd \@ht) |
| 20323 |
\ifPOE@voltage% |
| 20324 |
\psline(!\@wd 4 div 3 mul neg \@ht)% |
| 20325 |
(! \@wd 4 div 3 mul neg \@ht 0.16 add) |
| 20326 |
\pscircle[fillstyle=solid, fillcolor=white]% |
| 20327 |
(! \@wd 4 div 3 mul neg \@ht 0.2 add){0.04} |
| 20328 |
\psline(! \@wd 4 div 3 mul neg \@ht neg)% |
| 20329 |
(! \@wd 4 div 3 mul neg \@ht neg 0.2 sub)% |
| 20330 |
\psline(! \@wd 4 div 3 mul neg 0.15 sub \@ht neg 0.2 sub)% |
| 20331 |
(! \@wd 4 div 3 mul neg 0.15 add \@ht neg 0.2 sub)% |
| 20332 |
\fi |
| 20333 |
\ifPOE@lamp |
| 20334 |
\rput(! \@wd \@ht){% |
| 20335 |
\psset{style=CrystalLamp}% |
| 20336 |
\rput(0, 0.4){\crystal@lamp}% |
| 20337 |
}% |
| 20338 |
\fi |
| 20339 |
\ifdim\POE@key@caxislength pt=0pt\else |
| 20340 |
\def\@cl{% |
| 20341 |
\POE@key@caxislength\space |
| 20342 |
\ifPOE@caxisinv -1 mul\space\fi |
| 20343 |
}% |
| 20344 |
\psline[style=CrystalCaxis](! 0 \@cl \POE@dict{sign} \@ht mul)% |
| 20345 |
(! 0 \@cl \POE@dict{sign} neg \@ht mul \@cl sub)% |
| 20346 |
\fi |
| 20347 |
\ignorespaces}% |
| 20348 |
% \end{macrocode} |
| 20349 |
% \end{macro} |
| 20350 |
% |
| 20351 |
% \begin{macro}{\crystal@lamp} |
| 20352 |
% \begin{macrocode} |
| 20353 |
\def\crystal@lamp{% |
| 20354 |
\pscurve[fillstyle=none](-0.015, 0)(-0.03, -0.045)(-0.06, -0.075)% |
| 20355 |
(-0.075, -0.15)(0, -0.21)(0.075, -0.15)(0.06, -0.075)% |
| 20356 |
(0.03, -0.045)(0.015, 0) |
| 20357 |
\multido{\i=-30+40}{7}{% |
| 20358 |
\rput{\i}(0, -0.135){% |
| 20359 |
\psline(-0.105, 0)(-0.18, 0) |
| 20360 |
}% |
| 20361 |
}% |
| 20362 |
\ignorespaces}% |
| 20363 |
% \end{macrocode} |
| 20364 |
% \end{macro} |
| 20365 |
% |
| 20366 |
% \subsubsection{polarization} |
| 20367 |
% |
| 20368 |
% \begin{macro}{\polarization@comp} |
| 20369 |
% \begin{macrocode} |
| 20370 |
\def\polarization@comp{% |
| 20371 |
\edef\@sz{\POE@key@polsize\space 0.5 mul }% |
| 20372 |
\psset{style=Polarization}% |
| 20373 |
\ifx\POE@key@poltype\POE@str@parallel |
| 20374 |
\psline[arrows=<->](! 0 \@sz neg)(! 0 \@sz) |
| 20375 |
\fi |
| 20376 |
\ifx\POE@key@poltype\POE@str@perp |
| 20377 |
\psdot(0,0) |
| 20378 |
\pscircle[fillstyle=none](0,0){0.12} |
| 20379 |
\fi |
| 20380 |
\ifx\POE@key@poltype\POE@str@misc |
| 20381 |
\psline[arrows=<->](! 0 \@sz neg)(! 0 \@sz) |
| 20382 |
\psdot(0,0) |
| 20383 |
\pscircle[fillstyle=none](0,0){0.12} |
| 20384 |
\fi |
| 20385 |
\ifx\POE@key@poltype\POE@str@rcirc |
| 20386 |
\psellipticarc[fillstyle=none, arrows=->]% |
| 20387 |
(0,0)(! \@sz 2 div \@sz){20}{-20} |
| 20388 |
\fi |
| 20389 |
\ifx\POE@key@poltype\POE@str@lcirc |
| 20390 |
\psellipticarc[fillstyle=none, arrows=<-]% |
| 20391 |
(0,0)(! \@sz 2 div \@sz){20}{-20} |
| 20392 |
\fi |
| 20393 |
\ignorespaces}% |
| 20394 |
% \end{macrocode} |
| 20395 |
% \end{macro} |
| 20396 |
% |
| 20397 |
% \subsubsection{optgrating} |
| 20398 |
% |
| 20399 |
% \begin{macro}{\optgrating@ref} |
| 20400 |
% \begin{macrocode} |
| 20401 |
\def\optgrating@ref{% |
| 20402 |
\POE@setref{/@@x \POE@key@gratingwidth\space 0.5 mul def}% |
| 20403 |
}% |
| 20404 |
% \end{macrocode} |
| 20405 |
% \end{macro} |
| 20406 |
% |
| 20407 |
% \begin{macro}{\optgrating@comp} |
| 20408 |
% \begin{macrocode} |
| 20409 |
\def\optgrating@comp{% |
| 20410 |
\edef\@cnt{\POE@key@gratingcount\space}% |
| 20411 |
\edef\@wd{\POE@key@gratingwidth\space 0.5 mul }% |
| 20412 |
\ifdim\POE@key@gratingheight pt<\POE@key@gratingdepth pt |
| 20413 |
\edef\@ht{\POE@key@gratingdepth\space}% |
| 20414 |
\else |
| 20415 |
\edef\@ht{\POE@key@gratingheight\space}% |
| 20416 |
\fi |
| 20417 |
% \end{macrocode} |
| 20418 |
% Shift the grating by its depth if gratingalign is set to 'center'. |
| 20419 |
% \begin{macrocode} |
| 20420 |
\ifx\POE@key@gratingalign\POE@str@top |
| 20421 |
\edef\@dp{\POE@key@gratingdepth\space}% |
| 20422 |
\edef\@bl{0 }% |
| 20423 |
\else |
| 20424 |
\edef\@dp{0 }% |
| 20425 |
\edef\@bl{\POE@key@gratingdepth\space neg }% |
| 20426 |
\edef\@ht{\@ht \POE@key@gratingdepth\space sub }% |
| 20427 |
\fi |
| 20428 |
\edef\@step{\POE@key@gratingwidth\space\@cnt div }% |
| 20429 |
\ifx\POE@key@gratingtype\POE@str@blazed |
| 20430 |
\pscustom[linewidth=\POE@key@gratinglinewidth, linejoin=1]{% |
| 20431 |
\psline[liftpen=1](! \@wd \@dp)(! \@wd \@ht)% |
| 20432 |
(! \@wd neg \@ht)(! \@wd neg \@dp)% |
| 20433 |
\multido{\i=0+1}{\POE@key@gratingcount}{% |
| 20434 |
\psline[liftpen=1]% |
| 20435 |
(! \@wd neg \i\space \@step mul add \@dp)% |
| 20436 |
(! \@wd neg \i\space |
| 20437 |
\ifPOE@reverse\else 1 add \fi \@step mul add \@bl)% |
| 20438 |
(! \@wd neg \i\space 1 add \@step mul add \@dp)% |
| 20439 |
}% |
| 20440 |
\closepath |
| 20441 |
}% |
| 20442 |
\else\ifx\POE@key@gratingtype\POE@str@binary |
| 20443 |
\pscustom[linewidth=\POE@key@gratinglinewidth, linejoin=1]{% |
| 20444 |
\psline[liftpen=1](! \@wd \@dp)(! \@wd \@ht)% |
| 20445 |
(! \@wd neg \@ht)(! \@wd neg \@dp)% |
| 20446 |
\multido{\i=0+1}{\POE@key@gratingcount}{% |
| 20447 |
\psline[liftpen=1]% |
| 20448 |
(! \@wd neg \i\space \@step mul add \@dp)% |
| 20449 |
(! \@wd neg \i\space \@step mul add \@bl)% |
| 20450 |
(! \@wd neg \i\space 0.5 add \@step mul add \@bl)% |
| 20451 |
(! \@wd neg \i\space 0.5 add \@step mul add \@dp)% |
| 20452 |
(! \@wd neg \i\space 1 add \@step mul add \@dp)% |
| 20453 |
}% |
| 20454 |
\closepath |
| 20455 |
}% |
| 20456 |
\fi\fi |
| 20457 |
\ifPOE@variable |
| 20458 |
\psarc[style=VariableStyle]% |
| 20459 |
(! \POE@key@gratingwidth\space 0.5 mul 0.4 sub |
| 20460 |
\POE@key@gratingheight\space 0.5 mul){0.6}{-20}{20} |
| 20461 |
\psarc[style=VariableStyle]% |
| 20462 |
(! 0.4 \POE@key@gratingwidth\space 0.5 mul sub |
| 20463 |
\POE@key@gratingheight\space 0.5 mul){0.6}{160}{200} |
| 20464 |
\fi |
| 20465 |
\ignorespaces}% |
| 20466 |
% \end{macrocode} |
| 20467 |
% \end{macro} |
| 20468 |
% |
| 20469 |
% \subsubsection{transmissiongrating} |
| 20470 |
% |
| 20471 |
% \begin{macro}{\transmissiongrating@ref} |
| 20472 |
% \begin{macrocode} |
| 20473 |
\def\transmissiongrating@ref{% |
| 20474 |
\POE@calcAngle |
| 20475 |
\POE@setref{/@@x \POE@key@gratingwidth\space 0.5 mul def}% |
| 20476 |
\edef\POE@key@angle{% |
| 20477 |
\POE@dict{ exch@ref@\oenode{}{} { -90 }{ 90 } ifelse } |
| 20478 |
\POE@key@angle\space add |
| 20479 |
}% |
| 20480 |
\POE@Verb{% |
| 20481 |
@xref @yref |
| 20482 |
exch@ref@\oenode{}{} { |
| 20483 |
[ exch { neg } forall ] |
| 20484 |
} if |
| 20485 |
/@xref ED |
| 20486 |
exch@ref@\oenode{}{} { |
| 20487 |
[ exch { neg } forall ] |
| 20488 |
} if |
| 20489 |
/@yref ED |
| 20490 |
}% |
| 20491 |
}% |
| 20492 |
% \end{macrocode} |
| 20493 |
% \end{macro} |
| 20494 |
% |
| 20495 |
% \begin{macro}{\transmissiongrating@nodes} |
| 20496 |
% \begin{macrocode} |
| 20497 |
\def\transmissiongrating@nodes{% |
| 20498 |
\newOptexpComp{% |
| 20499 |
{0 0} {1 0} \POE@key@gratingwidth\space -0.5 mul dup neg |
| 20500 |
refltrans {PlainIfc} 1}% |
| 20501 |
}% |
| 20502 |
\let\transmissiongrating@comp\optgrating@comp |
| 20503 |
% \end{macrocode} |
| 20504 |
% \end{macro} |
| 20505 |
% |
| 20506 |
% \subsubsection{optbox} |
| 20507 |
% |
| 20508 |
% \begin{macro}{\optbox@ref} |
| 20509 |
% \begin{macrocode} |
| 20510 |
\def\optbox@ref{% |
| 20511 |
\POE@setref{% |
| 20512 |
/@@x \POE@key@optboxwidth\space 0.5 mul def |
| 20513 |
/@@y \POE@key@optboxheight\space 0.5 mul def |
| 20514 |
}% |
| 20515 |
}% |
| 20516 |
% \end{macrocode} |
| 20517 |
% \end{macro} |
| 20518 |
% |
| 20519 |
% \begin{macro}{\optbox@comp} |
| 20520 |
% \begin{macrocode} |
| 20521 |
\let\optbox@comp\POE@comp@rectangle |
| 20522 |
% \end{macrocode} |
| 20523 |
% \end{macro} |
| 20524 |
% |
| 20525 |
% \subsubsection{optsource} |
| 20526 |
% |
| 20527 |
% \begin{macro}{\optsource@ref} |
| 20528 |
% \begin{macrocode} |
| 20529 |
\def\optsource@ref{% |
| 20530 |
\let\POE@key@optboxwidth\POE@key@sourcewidth |
| 20531 |
\let\POE@key@optboxheight\POE@key@sourceheight |
| 20532 |
\optbox@ref |
| 20533 |
}% |
| 20534 |
% \end{macrocode} |
| 20535 |
% \end{macro} |
| 20536 |
% |
| 20537 |
% \begin{macro}{\optsource@nodes} |
| 20538 |
% \begin{macrocode} |
| 20539 |
\def\optsource@nodes{% |
| 20540 |
\POE@dipole@nodes |
| 20541 |
\POE@Verb{% |
| 20542 |
\oenode{}{} begin |
| 20543 |
4 dict dup /source exch def begin |
| 20544 |
\if\POE@key@sourcebeamangle\relax\else |
| 20545 |
/beamangle \POE@key@sourcebeamangle\space def |
| 20546 |
\fi |
| 20547 |
\if\POE@key@sourcebeamdiv\relax\else |
| 20548 |
/beamdiv \POE@key@sourcebeamdiv\space def |
| 20549 |
\fi |
| 20550 |
\if\POE@key@sourcebeamwidth\relax\else |
| 20551 |
/beamwidth \POE@key@sourcebeamwidth\space def |
| 20552 |
\fi |
| 20553 |
\if\POE@key@sourcebeamalign\relax\else |
| 20554 |
/beamalign \POE@key@sourcebeamalign\space def |
| 20555 |
\fi |
| 20556 |
end |
| 20557 |
source length 0 eq { currentdict /source undef } if |
| 20558 |
end }% |
| 20559 |
}% |
| 20560 |
% |
| 20561 |
% \begin{macro}{\optsource@comp} |
| 20562 |
% \begin{macrocode} |
| 20563 |
\let\optsource@comp\POE@comp@rectangle |
| 20564 |
% \end{macrocode} |
| 20565 |
% \end{macro} |
| 20566 |
% |
| 20567 |
% \subsubsection{optplate} |
| 20568 |
% |
| 20569 |
% \begin{macro}{\optplate@ref} |
| 20570 |
% \begin{macrocode} |
| 20571 |
\def\optplate@ref{% |
| 20572 |
\POE@setref{/@@y \POE@key@plateheight\space 0.5 mul def }% |
| 20573 |
}% |
| 20574 |
% \end{macrocode} |
| 20575 |
% \end{macro} |
| 20576 |
% |
| 20577 |
% \begin{macro}{\optplate@comp} |
| 20578 |
% \begin{macrocode} |
| 20579 |
\def\optplate@comp{% |
| 20580 |
\psline[linewidth=\POE@key@platelinewidth]% |
| 20581 |
(! \POE@dict{0 @@y neg})(! \POE@dict{0 @@y}) |
| 20582 |
\ignorespaces}% |
| 20583 |
% \end{macrocode} |
| 20584 |
% \end{macro} |
| 20585 |
% |
| 20586 |
% \subsubsection{optdetector} |
| 20587 |
% |
| 20588 |
% \begin{macro}{\optdetector@ref} |
| 20589 |
% \begin{macrocode} |
| 20590 |
\def\optdetector@ref{% |
| 20591 |
\ifx\POE@key@detsize\@empty |
| 20592 |
\POE@setref{% |
| 20593 |
/@@y \POE@key@detheight\space 0.5 mul def |
| 20594 |
/@@x \POE@key@detwidth\space 0.5 mul def |
| 20595 |
}% |
| 20596 |
\else |
| 20597 |
\POE@setref{% |
| 20598 |
/@@y \POE@key@detsize\space 0.5 mul def |
| 20599 |
/@@x \POE@key@detsize\space 0.5 mul |
| 20600 |
\ifx\POE@key@dettype\POE@str@round 0.5 mul\fi |
| 20601 |
\space def |
| 20602 |
}% |
| 20603 |
\fi |
| 20604 |
}% |
| 20605 |
% \end{macrocode} |
| 20606 |
% \end{macro} |
| 20607 |
% |
| 20608 |
% \begin{macro}{\optdetector@nodes} |
| 20609 |
% \begin{macrocode} |
| 20610 |
\def\optdetector@nodes{% |
| 20611 |
\POE@dipole@nodes |
| 20612 |
\ifx\POE@key@dettype\POE@str@round |
| 20613 |
\pnode(! \POE@dict{@@x0 @@x -0.2 mul add} 0){\oenodeCenter{}}% |
| 20614 |
\fi |
| 20615 |
}% |
| 20616 |
% \end{macrocode} |
| 20617 |
% \end{macro} |
| 20618 |
% |
| 20619 |
% \begin{macro}{\optdetector@comp} |
| 20620 |
% \begin{macrocode} |
| 20621 |
\def\optdetector@comp{% |
| 20622 |
\ifx\POE@key@dettype\POE@str@round |
| 20623 |
\psellipticwedge(!\POE@dict{@@x0 @@x sub @@y0})% |
| 20624 |
(!\POE@dict{@@x 2 mul @@y}){-90}{90}% |
| 20625 |
\else\ifx\POE@key@dettype\POE@str@diode |
| 20626 |
\ifx\POE@key@detsize\@empty |
| 20627 |
\ifdim\POE@key@detwidth pt<\POE@key@detheight pt |
| 20628 |
\def\@sz{\POE@key@detwidth\space 0.5 mul }% |
| 20629 |
\else |
| 20630 |
\def\@sz{\POE@key@detheight\space 0.5 mul }% |
| 20631 |
\fi |
| 20632 |
\else |
| 20633 |
\def\@sz{\POE@key@detsize\space 0.5 mul }% |
| 20634 |
\fi |
| 20635 |
\POE@comp@rectangle |
| 20636 |
\bgroup |
| 20637 |
\psset{style=DetectorStyle} |
| 20638 |
\pspolygon(! \@sz -0.2 mul \@sz -0.4 mul)% |
| 20639 |
(! \@sz 0.6 mul \@sz -0.4 mul)% |
| 20640 |
(! \@sz 0.2 mul \@sz 0.4 mul)% |
| 20641 |
\psline(! \@sz -0.2 mul \@sz 0.4 mul \POE@clwh add)% |
| 20642 |
(! \@sz 0.6 mul \@sz 0.4 mul \POE@clwh add) |
| 20643 |
\psset{arrows=->, arrowinset=0, arrowscale=0.8}% |
| 20644 |
\psline(! \@sz -0.8 mul \@sz 0.3 mul)% |
| 20645 |
(! \@sz -0.3 mul \@sz 0.15 mul)% |
| 20646 |
\psline(! \@sz -0.8 mul 0)(! \@sz -0.3 mul \@sz -0.15 mul)% |
| 20647 |
\egroup |
| 20648 |
\fi\fi |
| 20649 |
\ignorespaces}% |
| 20650 |
% \end{macrocode} |
| 20651 |
% \end{macro} |
| 20652 |
% |
| 20653 |
% \begin{macro}{optdetector@conn} |
| 20654 |
% \begin{macrocode} |
| 20655 |
\def\optdetector@conn{% |
| 20656 |
\ifPOE@startbox\else |
| 20657 |
\ifPOE@beam |
| 20658 |
\drawbeam[raytrace=false](\oenodeRefA{}){} |
| 20659 |
\else\ifPOE@fiberin@ |
| 20660 |
\drawfiber@{FiberIn}(\oenodeRefA{}){} |
| 20661 |
\else\ifPOE@wirein@ |
| 20662 |
\drawwire@{WireIn}(\oenodeRefA{}){} |
| 20663 |
\fi\fi\fi |
| 20664 |
\fi |
| 20665 |
\ifPOE@endbox\else |
| 20666 |
\ifPOE@wirepresetout@ |
| 20667 |
\drawwire@{WireOut}{}(\oenodeRefB{}) |
| 20668 |
\else\ifPOE@fiberout@ |
| 20669 |
\drawfiber@{FiberOut}{}(\oenodeRefB{}) |
| 20670 |
\fi\fi |
| 20671 |
\fi |
| 20672 |
}% |
| 20673 |
% \end{macrocode} |
| 20674 |
% \end{macro} |
| 20675 |
% \subsubsection{optretplate} |
| 20676 |
% |
| 20677 |
% \begin{macro}{\optretplate@ref} |
| 20678 |
% \begin{macrocode} |
| 20679 |
\def\optretplate@ref{% |
| 20680 |
\POE@setref{% |
| 20681 |
/@@y \POE@key@plateheight\space 0.5 mul def |
| 20682 |
/@@x \POE@key@platewidth\space 0.5 mul def |
| 20683 |
}% |
| 20684 |
}% |
| 20685 |
% \end{macrocode} |
| 20686 |
% \end{macro} |
| 20687 |
% |
| 20688 |
% \begin{macro}{\optretplate@comp} |
| 20689 |
% \begin{macrocode} |
| 20690 |
\def\optretplate@comp{% |
| 20691 |
\edef\@ht{\POE@key@plateheight\space 0.5 mul }% |
| 20692 |
\edef\@wd{\POE@key@platewidth\space 0.5 mul }% |
| 20693 |
\psframe(! \@wd neg \@ht neg)(! \@wd \@ht) |
| 20694 |
\psline{cc-cc}(! \@wd neg \@ht)(! \@wd \@ht neg) |
| 20695 |
\ignorespaces}% |
| 20696 |
% \end{macrocode} |
| 20697 |
% \end{macro} |
| 20698 |
% |
| 20699 |
% \subsubsection{optdiode} |
| 20700 |
% |
| 20701 |
% \begin{macro}{\optdiode@ref} |
| 20702 |
% \begin{macrocode} |
| 20703 |
\def\optdiode@ref{% |
| 20704 |
\POE@setref{% |
| 20705 |
\POE@key@optdiodesize\space 0.5 mul dup dup /@@y ED /@@x ED |
| 20706 |
0.4 mul /@@sz ED |
| 20707 |
}% |
| 20708 |
}% |
| 20709 |
% \end{macrocode} |
| 20710 |
% \end{macro} |
| 20711 |
% |
| 20712 |
% \begin{macro}{\optdiode@comp} |
| 20713 |
% \begin{macrocode} |
| 20714 |
\def\optdiode@comp{% |
| 20715 |
\POE@comp@rectangle |
| 20716 |
\pspolygon(!\POE@dict{@@sz neg dup}) |
| 20717 |
(!\POE@dict{@@sz neg @@sz}) |
| 20718 |
(!\POE@dict{@@sz 0}) |
| 20719 |
\psline(!\POE@dict{@@sz \POE@clwh add @@sz})% |
| 20720 |
(!\POE@dict{@@sz \POE@clwh add @@sz neg}) |
| 20721 |
\ignorespaces}% |
| 20722 |
% \end{macrocode} |
| 20723 |
% \end{macro} |
| 20724 |
% |
| 20725 |
% \subsubsection{doveprism} |
| 20726 |
% |
| 20727 |
% \begin{macro}{doveprism@ref} |
| 20728 |
% \begin{macrocode} |
| 20729 |
\def\doveprism@ref{% |
| 20730 |
\POE@setref{/@@x \POE@key@doveprismwidth\space 0.5 mul def |
| 20731 |
/@@y \POE@key@doveprismheight\space 0.5 mul def}% |
| 20732 |
}% |
| 20733 |
% \end{macrocode} |
| 20734 |
% \end{macro} |
| 20735 |
% \begin{macro}{\doveprism@nodes} |
| 20736 |
% \begin{macrocode} |
| 20737 |
\def\doveprism@nodes{% |
| 20738 |
\newOptexpComp{% |
| 20739 |
/@htsq @@y 2 sqrt mul def |
| 20740 |
{@@x neg @@y add 0} {1 1} |
| 20741 |
@htsq neg @htsq trans {PlainIfc} |
| 20742 |
{0 @@y neg} {1 0} |
| 20743 |
@@x neg dup neg |
| 20744 |
refl {PlainIfc} |
| 20745 |
{@@x @@y sub 0} {-1 1} |
| 20746 |
@htsq neg @htsq trans {PlainIfc} |
| 20747 |
\POE@key@n true |
| 20748 |
}% |
| 20749 |
\ignorespaces}% |
| 20750 |
% \end{macrocode} |
| 20751 |
% \end{macro} |
| 20752 |
% |
| 20753 |
% \begin{macro}{\doveprism@comp} |
| 20754 |
% \begin{macrocode} |
| 20755 |
\def\doveprism@comp{% |
| 20756 |
\pspolygon(!\POE@dict{@@x neg @@y neg})% |
| 20757 |
(!\POE@dict{@@x @@y neg})% |
| 20758 |
(!\POE@dict{@@x @@y 2 mul sub @@y})% |
| 20759 |
(!\POE@dict{@@y 2 mul @@x sub @@y}) |
| 20760 |
\ignorespaces}% |
| 20761 |
% \end{macrocode} |
| 20762 |
% \end{macro} |
| 20763 |
% |
| 20764 |
% \subsubsection{glanthompson} |
| 20765 |
% |
| 20766 |
% \begin{macro}{\glanthompson@ref} |
| 20767 |
% \begin{macrocode} |
| 20768 |
\def\glanthompson@ref{% |
| 20769 |
\POE@setref{% |
| 20770 |
/@@x \POE@key@glanthompsonwidth\space 0.5 mul def |
| 20771 |
/@@y \POE@key@glanthompsonheight\space 0.5 mul def |
| 20772 |
}% |
| 20773 |
}% |
| 20774 |
% \end{macrocode} |
| 20775 |
% \end{macro} |
| 20776 |
% |
| 20777 |
% \begin{macro}{\glanthompson@nodes} |
| 20778 |
% \begin{macrocode} |
| 20779 |
\def\glanthompson@nodes{% |
| 20780 |
\newOptexpCompAmb{% |
| 20781 |
{@@x neg 0} {0 1} @@x neg @@x trans {PlainIfc} |
| 20782 |
{@@x 0} {0 1} @@x neg @@x trans {PlainIfc} |
| 20783 |
{\POE@key@glanthompsongap\space -0.5 mul 0} {@@x neg @@y} 0 0 trans {PlainIfc} |
| 20784 |
{0 @@y neg} {1 0} @@y neg @@y trans {PlainIfc} |
| 20785 |
{0 @@y} {1 0} @@y neg @@y trans {PlainIfc} |
| 20786 |
3 \POE@key@n |
| 20787 |
} |
| 20788 |
}% |
| 20789 |
% \end{macrocode} |
| 20790 |
% \end{macro} |
| 20791 |
% |
| 20792 |
% \begin{macro}{\glanthompson@comp} |
| 20793 |
% \begin{macrocode} |
| 20794 |
\def\glanthompson@comp{% |
| 20795 |
\ifdim\POE@key@glanthompsongap pt>0pt |
| 20796 |
\pspolygon(!\POE@dict{@@x neg @@y})% |
| 20797 |
(!\POE@dict{@@x neg @@y neg})% |
| 20798 |
(!\POE@dict{@@x \POE@key@glanthompsongap\space sub @@y neg}) |
| 20799 |
\pspolygon(!\POE@dict{@@x neg \POE@key@glanthompsongap\space add @@y})% |
| 20800 |
(!\POE@dict{@@x @@y})% |
| 20801 |
(!\POE@dict{@@x @@y neg})% |
| 20802 |
\else |
| 20803 |
\psframe(!\POE@dict{@@x neg @@y neg})(!\POE@dict{@@x @@y}) |
| 20804 |
\psline[arrows=cc-cc](!\POE@dict{@@x neg @@y})(!\POE@dict{@@x @@y neg}) |
| 20805 |
\fi |
| 20806 |
}% |
| 20807 |
% \end{macrocode} |
| 20808 |
% \end{macro} |
| 20809 |
% \subsubsection{pentaprism} |
| 20810 |
% |
| 20811 |
% \begin{macro}{\pentaprism@nodes} |
| 20812 |
% \begin{macrocode} |
| 20813 |
\def\pentaprism@nodes{% |
| 20814 |
\edef\@sz{\POE@key@pentaprismsize\space}% |
| 20815 |
\newOptexpComp{% |
| 20816 |
{\@sz 2 sqrt -2 mul div dup } {-1 1} |
| 20817 |
\@sz -0.5 mul dup neg trans {PlainIfc} |
| 20818 |
{\@sz 2 sqrt div 67.5 cos \@sz mul |
| 20819 |
67.5 sin 2 mul div sub \@sz 2 div} |
| 20820 |
{67.5 cos \@sz mul 67.5 sin div neg \@sz} |
| 20821 |
\@sz 22.5 cos div -0.5 mul dup neg refl {PlainIfc} |
| 20822 |
{\@sz 2 sqrt div neg 67.5 cos \@sz mul |
| 20823 |
67.5 sin 2 mul div add \@sz 2 div} |
| 20824 |
{67.5 cos \@sz mul 67.5 sin div \@sz} |
| 20825 |
\@sz 22.5 cos div -0.5 mul dup neg refl {PlainIfc} |
| 20826 |
{\@sz 2 sqrt 2 mul div dup neg} {1 1} |
| 20827 |
\@sz -0.5 mul dup neg trans {PlainIfc} |
| 20828 |
\POE@key@n |
| 20829 |
}% |
| 20830 |
}% |
| 20831 |
% \end{macrocode} |
| 20832 |
% \end{macro} |
| 20833 |
% |
| 20834 |
% \begin{macro}{\pentaprism@comp} |
| 20835 |
% \begin{macrocode} |
| 20836 |
\def\pentaprism@comp{% |
| 20837 |
\edef\@sz{\POE@key@pentaprismsize\space}% |
| 20838 |
\pscustom{% |
| 20839 |
\psline(! \@sz 2 sqrt div 0)% |
| 20840 |
(! \@sz 2 sqrt div 67.5 cos \@sz mul |
| 20841 |
67.5 sin div sub \@sz)% |
| 20842 |
(! 67.5 cos \@sz mul 67.5 sin div \@sz |
| 20843 |
2 sqrt div sub \@sz)% |
| 20844 |
(! \@sz 2 sqrt div neg 0)% |
| 20845 |
(! 0 \@sz 2 sqrt div neg)% |
| 20846 |
\closepath |
| 20847 |
}% |
| 20848 |
}% |
| 20849 |
% \end{macrocode} |
| 20850 |
% \end{macro} |
| 20851 |
% |
| 20852 |
% \subsubsection{optprism} |
| 20853 |
% |
| 20854 |
% \begin{macro}{\optprism@ref} |
| 20855 |
% \begin{macrocode} |
| 20856 |
\def\optprism@ref{% |
| 20857 |
\POE@calcAngle |
| 20858 |
\ifx\POE@key@prismtype\POE@str@reflective |
| 20859 |
\edef\POE@key@labelrefangle{180}% |
| 20860 |
\fi |
| 20861 |
}% |
| 20862 |
% \end{macrocode} |
| 20863 |
% \end{macro} |
| 20864 |
% |
| 20865 |
% \begin{macro}{\optprism@nodes} |
| 20866 |
% \begin{macrocode} |
| 20867 |
\def\optprism@nodes{% |
| 20868 |
\edef\@sz{\POE@key@prismsize\space}% |
| 20869 |
\edef\@ang{\POE@key@prismangle\space 0.5 mul\space}% |
| 20870 |
\edef\@hshift{% |
| 20871 |
\ifx\POE@key@prismalign\POE@str@auto |
| 20872 |
\POE@dict{OEangle} 1e-5 lt { |
| 20873 |
0 |
| 20874 |
} { |
| 20875 |
\@sz 0.6 mul \@ang tan mul \POE@dict{OEangle} 0.5 mul tan div |
| 20876 |
} ifelse |
| 20877 |
\else |
| 20878 |
0 |
| 20879 |
\fi |
| 20880 |
}% |
| 20881 |
\begingroup |
| 20882 |
\edef\POE@temp{\ifx\POE@key@prismtype\POE@str@reflective neg \fi}% |
| 20883 |
\pnode(! 0 \@hshift neg){\oenodeCenter{}}% |
| 20884 |
\newOptexpComp{% |
| 20885 |
{\@sz -0.6 mul \@ang tan mul \@hshift neg} |
| 20886 |
{90 \@ang sub dup cos exch sin \POE@temp} |
| 20887 |
\@sz \@ang cos div dup -0.4 mul exch 0.6 mul trans {PlainIfc} |
| 20888 |
{\@sz 0.6 mul \@ang tan mul \@hshift neg} |
| 20889 |
{90 \@ang add dup cos exch sin \POE@temp} |
| 20890 |
\@sz \@ang cos div dup -0.4 mul exch 0.6 mul trans {PlainIfc} |
| 20891 |
% \end{macrocode} |
| 20892 |
% Need to change the order of the two interfaces on the stack and add an |
| 20893 |
% additional interface. |
| 20894 |
% \begin{macrocode} |
| 20895 |
\ifx\POE@key@prismtype\POE@str@reflective |
| 20896 |
12 6 roll |
| 20897 |
{0 \@sz 0.4 mul \@hshift sub } |
| 20898 |
{1 0} \@ang tan \@sz mul dup neg exch refl {PlainIfc} |
| 20899 |
12 6 roll |
| 20900 |
\fi |
| 20901 |
\POE@key@n true }% |
| 20902 |
\endgroup |
| 20903 |
}% |
| 20904 |
% \end{macrocode} |
| 20905 |
% \end{macro} |
| 20906 |
% |
| 20907 |
% \begin{macro}{\optprism@comp} |
| 20908 |
% \begin{macrocode} |
| 20909 |
\def\optprism@comp{% |
| 20910 |
\edef\@sz{\POE@key@prismsize\space}% |
| 20911 |
\edef\@altan{\POE@key@prismangle\space 0.5 mul tan }% |
| 20912 |
\edef\@hshift{% |
| 20913 |
\ifx\POE@key@prismalign\POE@str@auto |
| 20914 |
\POE@dict{OEangle} 1e-5 lt { |
| 20915 |
0 |
| 20916 |
} { |
| 20917 |
\@sz 0.6 mul \@altan mul \POE@dict{OEangle} 0.5 mul tan div |
| 20918 |
} ifelse |
| 20919 |
\else |
| 20920 |
0 |
| 20921 |
\fi |
| 20922 |
}% |
| 20923 |
\edef\POE@temp{\ifx\POE@key@prismtype\POE@str@reflective -1 mul \fi}% |
| 20924 |
\pspolygon(! \@sz neg \@altan mul \@sz -0.4 mul \POE@temp \@hshift sub) |
| 20925 |
(! \@sz \@altan mul \@sz -0.4 mul \POE@temp \@hshift sub) |
| 20926 |
(! 0 \@sz 0.6 mul \POE@temp \@hshift sub) |
| 20927 |
}% |
| 20928 |
% \end{macrocode} |
| 20929 |
% \end{macro} |
| 20930 |
% |
| 20931 |
% \subsubsection{rightangleprism} |
| 20932 |
% |
| 20933 |
% \begin{macro}{\rightangleprism@ref} |
| 20934 |
% All tripole components are aligned such, that the x-axis is normal |
| 20935 |
% to the angle bisector (Winkelhalbierende), but for the right angle |
| 20936 |
% prism the x-axis must be oriented normal to the bisector |
| 20937 |
% (Seitenhalbierende). So we must correct for the difference in both |
| 20938 |
% orientations, which is stored in dOEangle. |
| 20939 |
% \begin{macrocode} |
| 20940 |
\def\rightangleprism@ref{% |
| 20941 |
\POE@calcAngle |
| 20942 |
\POE@Verb{% |
| 20943 |
/@htA @myht def |
| 20944 |
/@OEtrafo {dOEangle matrix rotate dtransform } bind def |
| 20945 |
}% |
| 20946 |
% \end{macrocode} |
| 20947 |
% Correct also the label reference angle for nonsymmetric reference nodes. |
| 20948 |
% \begin{macrocode} |
| 20949 |
\let\POE@temp\POE@key@labelrefangle |
| 20950 |
\edef\POE@key@labelrefangle{\POE@temp \POE@dict{dOEangle add} }% |
| 20951 |
}% |
| 20952 |
% \end{macrocode} |
| 20953 |
% \end{macro} |
| 20954 |
% |
| 20955 |
% \begin{macro}{\rightangleprism@nodes} |
| 20956 |
% \begin{macrocode} |
| 20957 |
\def\rightangleprism@nodes{% |
| 20958 |
\edef\@sz{\POE@key@raprismsize\space 0.5 mul }% |
| 20959 |
\POE@Verb{% |
| 20960 |
\ifx\POE@key@raprismalign\POE@str@auto |
| 20961 |
/@corrshift {} bind def |
| 20962 |
\else |
| 20963 |
/@corrshift {@htA sub \@sz 0.5 mul add } bind def% |
| 20964 |
\fi |
| 20965 |
}% |
| 20966 |
\newOptexpComp{% |
| 20967 |
{@htA neg @htA \@sz sub @corrshift @OEtrafo} {1 0 @OEtrafo} |
| 20968 |
@htA \@sz sub @htA trans {PlainIfc} |
| 20969 |
{@htA neg 0 @corrshift @OEtrafo} {1 1 @OEtrafo} |
| 20970 |
@htA 2 sqrt mul dup \@sz 0.5 sqrt div sub exch refl {PlainIfc} |
| 20971 |
{@htA 0 @corrshift @OEtrafo} {-1 1 @OEtrafo} |
| 20972 |
@htA 2 sqrt mul dup \@sz 0.5 sqrt div sub exch refl {PlainIfc} |
| 20973 |
{@htA dup \@sz sub @corrshift @OEtrafo} {1 0 @OEtrafo} |
| 20974 |
@htA neg \@sz @htA sub trans {PlainIfc} |
| 20975 |
\POE@key@n |
| 20976 |
}% |
| 20977 |
\ignorespaces}% |
| 20978 |
% \end{macrocode} |
| 20979 |
% \end{macro} |
| 20980 |
% |
| 20981 |
% \begin{macro}{\rightangleprism@comp} |
| 20982 |
% \begin{macrocode} |
| 20983 |
\def\rightangleprism@comp{% |
| 20984 |
\edef\@sz{\POE@key@raprismsize\space 0.5 mul }% |
| 20985 |
\ifx\POE@key@raprismalign\POE@str@auto |
| 20986 |
\pspolygon(!\POE@dict{\@sz neg @htA \@sz sub @OEtrafo}) |
| 20987 |
(!\POE@dict{\@sz @htA \@sz sub @OEtrafo}) |
| 20988 |
(! 0 \POE@dict{@htA @OEtrafo})% |
| 20989 |
\else |
| 20990 |
\pspolygon(!\POE@dict{\@sz \@sz -0.5 mul @OEtrafo})% |
| 20991 |
(!\POE@dict{\@sz neg \@sz -0.5 mul @OEtrafo})% |
| 20992 |
(!\POE@dict{0 \@sz 0.5 mul @OEtrafo}) |
| 20993 |
\fi |
| 20994 |
\ignorespaces}% |
| 20995 |
% \end{macrocode} |
| 20996 |
% \end{macro} |
| 20997 |
% |
| 20998 |
% \subsubsection{optaom} |
| 20999 |
% |
| 21000 |
% \begin{macro}{\optaom@ref} |
| 21001 |
% \begin{macrocode} |
| 21002 |
\def\optaom@ref{% |
| 21003 |
\POE@setref{/@@x \POE@key@aomwidth\space 0.5 mul def }% |
| 21004 |
\POE@setref{/@@y \POE@key@aomheight\space 0.5 mul def }% |
| 21005 |
\POE@calcAngle |
| 21006 |
\ifx\POE@key@aomalign\POE@str@symmetric\else |
| 21007 |
\edef\POE@key@angle{\POE@key@angle\space 180 \POE@dict{OEangle} sub 0.5 mul sub }% |
| 21008 |
\fi |
| 21009 |
\edef\POE@key@angle{\POE@key@angle\space 180 add }% |
| 21010 |
}% |
| 21011 |
% \end{macrocode} |
| 21012 |
% \end{macro} |
| 21013 |
% |
| 21014 |
% \begin{macro}{\optaom@nodes} |
| 21015 |
% \begin{macrocode} |
| 21016 |
\def\optaom@nodes{% |
| 21017 |
\ifodd |
| 21018 |
\ifx\POE@key@aomalign\POE@str@symmetric |
| 21019 |
\ifx\POE@key@aomreflalign\POE@str@parallel 1\else 0\fi |
| 21020 |
\else 0\fi |
| 21021 |
% \end{macrocode} |
| 21022 |
% |
| 21023 |
% A 'parallel' reflection interface is possible only, if the aomalign is |
| 21024 |
% symmetric, because otherwise it is probable, that the incoming beam is |
| 21025 |
% parallel to that interface. |
| 21026 |
% \begin{macrocode} |
| 21027 |
\newOptexpCompAmb{% |
| 21028 |
{@@x neg 0} {0 1} @@y neg @@y |
| 21029 |
trans {PlainIfc} |
| 21030 |
{0 0} |
| 21031 |
\ifx\POE@key@aomalign\POE@str@symmetric |
| 21032 |
{1 0} |
| 21033 |
\else |
| 21034 |
{1 0 180 OEangle sub 0.5 mul matrix rotate dtransform} |
| 21035 |
\fi |
| 21036 |
0 0 trans {PlainIfc} |
| 21037 |
{@@x @@y} {0 1} @@y -2 mul 0 |
| 21038 |
trans {PlainIfc} |
| 21039 |
{@@x @@y neg} {0 1} 0 @@y 2 mul |
| 21040 |
trans {PlainIfc} |
| 21041 |
2 1 |
| 21042 |
}% |
| 21043 |
\else |
| 21044 |
\newOptexpCompAmb{% |
| 21045 |
{@@x neg 0} {0 1} @@y neg @@y trans {PlainIfc} |
| 21046 |
{0 0} |
| 21047 |
\ifx\POE@key@aomalign\POE@str@symmetric |
| 21048 |
{0 1} |
| 21049 |
\else |
| 21050 |
{0 1 180 OEangle sub 0.5 mul matrix rotate dtransform} |
| 21051 |
\fi |
| 21052 |
0 0 refltrans {PlainIfc} |
| 21053 |
{@@x @@y} {0 1} @@y -2 mul 0 |
| 21054 |
trans {PlainIfc} |
| 21055 |
{@@x @@y neg} {0 1} 0 @@y 2 mul |
| 21056 |
trans {PlainIfc} |
| 21057 |
2 1 |
| 21058 |
}% |
| 21059 |
\fi |
| 21060 |
\POE@Verb{% |
| 21061 |
gsave |
| 21062 |
tx@Dict begin |
| 21063 |
STV {CP T} stopped pop |
| 21064 |
end |
| 21065 |
(C) (\oenode{}{}) GetPlaneVec 2 copy |
| 21066 |
/N@\oenodeRefA{} @GetCenter |
| 21067 |
/N@\oenodeCenter{} @GetCenter |
| 21068 |
@ABVect 90 matrix rotate dtransform |
| 21069 |
NormalVec ReflectVec ToVec dup |
| 21070 |
\oenode{}{} begin |
| 21071 |
{0 0} exch 0 0 refltrans name (C-1) {PlainIfc} {sc} NewCompIfc |
| 21072 |
(C) (C1) IfcAlias |
| 21073 |
2 1 \POE@key@diffractionorders\space {% vec i |
| 21074 |
2 copy neg dup 5 string cvs (C) exch strcat % vec i vec -i (C-i) |
| 21075 |
3 -1 roll exec 4 -1 roll % vec i (C-i) X Y -i |
| 21076 |
1 add 180 OEangle sub 0.5 mul mul |
| 21077 |
matrix rotate dtransform ToVec % vec i (C-i) {X' Y'} |
| 21078 |
{0 0} exch 0 0 refltrans name 7 -1 roll {PlainIfc} {sc} NewCompIfc |
| 21079 |
2 copy 3 -1 roll 5 string cvs (C) exch strcat % vec i vec i (C-i) |
| 21080 |
3 -1 roll exec 4 -1 roll % vec i (Ci) X Y i |
| 21081 |
1 add 180 OEangle sub 0.5 mul mul |
| 21082 |
matrix rotate dtransform ToVec % vec i (Ci) {X' Y'} |
| 21083 |
{0 0} exch 0 0 refltrans name 7 -1 roll {PlainIfc} {sc} NewCompIfc |
| 21084 |
} for pop |
| 21085 |
/grating true def |
| 21086 |
end |
| 21087 |
grestore |
| 21088 |
}% |
| 21089 |
\POE@saveDiffractionNodes |
| 21090 |
\ignorespaces}% |
| 21091 |
% \end{macrocode} |
| 21092 |
% \end{macro} |
| 21093 |
% |
| 21094 |
% \begin{macro}{\optaom@comp} |
| 21095 |
% \begin{macrocode} |
| 21096 |
\def\optaom@comp{% |
| 21097 |
\POE@comp@rectangle |
| 21098 |
\ifx\POE@key@aomcomp\POE@str@default |
| 21099 |
\multido{\i=0+1}{\POE@key@aomgratingcount}{% |
| 21100 |
\psrline(!\POE@dict{@@x -0.7 mul \POE@key@aomgratingcount\space 2 div dup 1.5 add |
| 21101 |
@@y exch div exch 0.5 sub \i\space sub mul})% |
| 21102 |
(!\POE@dict{@@x 1.4 mul 0})% |
| 21103 |
}% |
| 21104 |
\else |
| 21105 |
\POE@key@aomcomp |
| 21106 |
\fi |
| 21107 |
\ignorespaces}% |
| 21108 |
% \end{macrocode} |
| 21109 |
% \end{macro} |
| 21110 |
% |
| 21111 |
% \subsubsection{off-axis parabolic mirror} |
| 21112 |
% |
| 21113 |
% \begin{macro}{\oapmirror@nodes} |
| 21114 |
% \begin{macrocode} |
| 21115 |
\def\oapmirror@nodes{% |
| 21116 |
\POE@calcAngle |
| 21117 |
\POE@Verb{% |
| 21118 |
gsave |
| 21119 |
STV CP T |
| 21120 |
/N@\oenodeRefA{} @GetCenter |
| 21121 |
/N@\oenodeCenter{} @GetCenter |
| 21122 |
@ABVect NormalizeVec 2 copy |
| 21123 |
90 matrix rotate dtransform |
| 21124 |
/N@\oenodeRefB{} @GetCenter |
| 21125 |
/N@\oenodeCenter{} @GetCenter @ABVect |
| 21126 |
\tx@UserCoor 2 copy 6 2 roll |
| 21127 |
grestore |
| 21128 |
DotProd tx@Dict begin /POEzonalradius ED end |
| 21129 |
DotProd |
| 21130 |
% y = ax^2, a = 1/(2x_0^2) (-h + sqrt(h^2 + x_0^2)), x_0 = @zonalradius. |
| 21131 |
tx@Dict begin |
| 21132 |
dup /POEoapheight ED neg dup dup mul POEzonalradius dup mul add sqrt add 0.5 POEzonalradius dup mul div mul |
| 21133 |
dup /POEoappar ED |
| 21134 |
/POEangle 180 OEangle sub 0.5 mul POEzonalradius 0 gt { -1 mul 180 add } if DegToRad def |
| 21135 |
end |
| 21136 |
}% |
| 21137 |
\def\POE@tempX{((POEoappar*(t^2))-(0.25/POEoappar)+POEoapheight)}% |
| 21138 |
\def\POE@tempY{(-t+POEzonalradius)}% |
| 21139 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{A}}{% |
| 21140 |
\psparametricplot[algebraic]% |
| 21141 |
{POEzonalradius dup 0 gt {\POE@key@oapmirroraperture@outer}{\POE@key@oapmirroraperture@inner} ifelse add}% |
| 21142 |
{POEzonalradius dup 0 gt {\POE@key@oapmirroraperture@inner}{\POE@key@oapmirroraperture@outer} ifelse sub}% |
| 21143 |
{(cos(POEangle)*\POE@tempX+sin(POEangle)*\POE@tempY)|(cos(POEangle)*\POE@tempY-sin(POEangle)*\POE@tempX)}}% |
| 21144 |
\newOptexpComp{% |
| 21145 |
{0 0} tx@IntersectDict /\PIT@name{\oenode@Path{A}} get 0 0 refl {PathIfc} |
| 21146 |
1 }% |
| 21147 |
\ignorespaces}% |
| 21148 |
% \end{macrocode} |
| 21149 |
% \end{macro} |
| 21150 |
% |
| 21151 |
% \begin{macro}{\oapmirror@comp} |
| 21152 |
% \begin{macrocode} |
| 21153 |
\def\oapmirror@comp{% |
| 21154 |
\pstracecurve{\oenode@Path{A}}% |
| 21155 |
\ignorespaces}% |
| 21156 |
% \end{macrocode} |
| 21157 |
% \end{macro} |
| 21158 |
% |
| 21159 |
% \subsubsection{Axicon} |
| 21160 |
% |
| 21161 |
% \begin{macro}{axicon@nodes} |
| 21162 |
% \begin{macrocode} |
| 21163 |
\def\axicon@nodes{% |
| 21164 |
\POE@setref{% |
| 21165 |
/@@right \POE@key@axiconheight\space 0.5 mul \POE@key@axiconangle\space dup sin exch cos div mul def |
| 21166 |
@@right \POE@key@axiconwidth\space max 0.5 mul /@@x exch def |
| 21167 |
/@@y \POE@key@axiconheight\space 0.5 mul def |
| 21168 |
/@@right |
| 21169 |
}% |
| 21170 |
\pssavepath[linestyle=none, arrows=-,ArrowInside=-]{\oenode@Path{A}}{% |
| 21171 |
\psline(!\POE@dict{@@x @@right sub @@y}) |
| 21172 |
(!\POE@dict{@@x 0}) |
| 21173 |
(!\POE@dict{@@x @@right sub @@y neg}) |
| 21174 |
}% |
| 21175 |
\newOptexpComp{% |
| 21176 |
{@@x neg 0} {0 1} @@y neg @@y trans {PlainIfc} |
| 21177 |
{@@x 0} |
| 21178 |
tx@IntersectDict /\PIT@name{\oenode@Path{A}} get 0 0 trans {PathIfc} |
| 21179 |
\POE@key@n }% |
| 21180 |
}% |
| 21181 |
% \end{macrocode} |
| 21182 |
% \end{macro} |
| 21183 |
% |
| 21184 |
% \begin{macro}{axicon@comp} |
| 21185 |
% \begin{macrocode} |
| 21186 |
\def\axicon@comp{% |
| 21187 |
\pspolygon[arrows=-]% |
| 21188 |
(!\POE@dict{@@x neg @@y})(!\POE@dict{@@x @@right sub @@y}) |
| 21189 |
(!\POE@dict{@@x 0})(!\POE@dict{@@x @@right sub @@y neg}) |
| 21190 |
(!\POE@dict{@@x neg @@y neg}) |
| 21191 |
%(!\POE@key@axiconwidth\space neg \POE@key@axiconheight\space -0.5 mul) |
| 21192 |
%(!\POE@key@axiconwidth\space neg \POE@key@axiconheight\space 0.5 mul) |
| 21193 |
%(! 0 \POE@key@axiconheight\space 0.5 mul) |
| 21194 |
%(! \POE@key@axiconheight\space 0.5 mul \POE@key@axiconangle\space tan mul 0) |
| 21195 |
%(! 0 \POE@key@axiconheight\space -0.5 mul) |
| 21196 |
}% |
| 21197 |
% \end{macrocode} |
| 21198 |
% \end{macro} |
| 21199 |
% |
| 21200 |
% \subsubsection{optwedge} |
| 21201 |
% |
| 21202 |
% \begin{macro}{optwedge@nodes} |
| 21203 |
% \begin{macrocode} |
| 21204 |
\def\optwedge@nodes{% |
| 21205 |
\POE@Verb{% |
| 21206 |
/@@xl \POE@key@wedgeheight\space \POE@key@wedgeangleleft\space tan mul def |
| 21207 |
/@@xr \POE@key@wedgeheight\space \POE@key@wedgeangleright\space tan mul def |
| 21208 |
/@@xa \POE@key@wedgewidth\space @@xl @@xr add sub dup 0 gt {0.5 mul}{pop 0} ifelse def |
| 21209 |
}% |
| 21210 |
\newOptexpComp{% |
| 21211 |
{@@xl @@xa add -0.5 mul 0} {\POE@key@wedgeangleleft\space tan 1} 0 0 trans {PlainIfc} |
| 21212 |
{@@xr @@xa add 0.5 mul 0} {\POE@key@wedgeangleright\space tan -1} 0 0 trans {PlainIfc} |
| 21213 |
\POE@key@n }% |
| 21214 |
}% |
| 21215 |
% \end{macrocode} |
| 21216 |
% \end{macro} |
| 21217 |
% |
| 21218 |
% \begin{macro}{optwedge@comp} |
| 21219 |
% \begin{macrocode} |
| 21220 |
\def\optwedge@comp{% |
| 21221 |
\pspolygon[arrows=-](!\POE@dict{@@xa} \POE@key@wedgeheight\space 0.5 mul) |
| 21222 |
(!\POE@dict{@@xa @@xr} add \POE@key@wedgeheight\space -0.5 mul) |
| 21223 |
(!\POE@dict{@@xa @@xl} add neg \POE@key@wedgeheight\space -0.5 mul) |
| 21224 |
(!\POE@dict{@@xa} neg \POE@key@wedgeheight\space 0.5 mul) |
| 21225 |
}% |
| 21226 |
% \end{macrocode} |
| 21227 |
% \end{macro} |
| 21228 |
% |
| 21229 |
% \subsection{Fiber components} |
| 21230 |
% |
| 21231 |
% \subsubsection{optfiber} |
| 21232 |
% |
| 21233 |
% \begin{macro}{optfiber@ref} |
| 21234 |
% \begin{macrocode} |
| 21235 |
\def\optfiber@ref{% |
| 21236 |
\POE@setref{% |
| 21237 |
/@@x \POE@key@fiberloopsep\space\POE@key@fiberloops\space |
| 21238 |
1 sub mul 0.5 mul def |
| 21239 |
}% |
| 21240 |
}% |
| 21241 |
% \end{macrocode} |
| 21242 |
% \end{macro} |
| 21243 |
% \begin{macro}{\optfiber@nodes} |
| 21244 |
% \begin{macrocode} |
| 21245 |
\def\optfiber@nodes{% |
| 21246 |
\newOptexpFiberComp{{@@x neg 0} {@@x 0}}% |
| 21247 |
\ignorespaces}% |
| 21248 |
% \end{macrocode} |
| 21249 |
% \end{macro} |
| 21250 |
% |
| 21251 |
% \begin{macro}{\optfiber@comp} |
| 21252 |
% \begin{macrocode} |
| 21253 |
\def\optfiber@comp{% |
| 21254 |
\pscustom[style=Fiber, arrows=-]{% |
| 21255 |
\multido{\i=0+1}{\POE@key@fiberloops}{% |
| 21256 |
\parametricplot[liftpen=1, plotpoints=100]{0}{1}{% |
| 21257 |
t 360 mul sin 1 t 360 mul cos sub |
| 21258 |
\POE@key@fiberloopradius\space dup 3 1 roll mul 3 1 roll mul |
| 21259 |
\POE@key@fiberloops\space 1 sub -2 div \i\space add |
| 21260 |
\POE@key@fiberloopsep\space mul add exch |
| 21261 |
}% |
| 21262 |
}% |
| 21263 |
}% |
| 21264 |
\ignorespaces}% |
| 21265 |
% \end{macrocode} |
| 21266 |
% \end{macro} |
| 21267 |
% |
| 21268 |
% \subsubsection{optmzm} |
| 21269 |
% |
| 21270 |
% \begin{macro}{\optmzm@ref} |
| 21271 |
% \begin{macrocode} |
| 21272 |
\def\optmzm@ref{% |
| 21273 |
\POE@setref{% |
| 21274 |
/@@x \POE@key@optmzmwidth\space 0.5 mul def |
| 21275 |
/@@y \POE@key@optmzmheight\space 0.5 mul def |
| 21276 |
}% |
| 21277 |
}% |
| 21278 |
% \end{macrocode} |
| 21279 |
% \end{macro} |
| 21280 |
% |
| 21281 |
% \begin{macro}{\optmzm@comp} |
| 21282 |
% \begin{macrocode} |
| 21283 |
\def\optmzm@comp{% |
| 21284 |
\POE@comp@rectangle |
| 21285 |
\begingroup |
| 21286 |
\POE@usefiberorwirestyle |
| 21287 |
\psline(! \POE@dict{@@x} neg 0)(! \POE@dict{@@x} -0.7 mul 0)% |
| 21288 |
(! \POE@dict{@@x} -0.4 mul \POE@dict{@@y} 0.6 mul)% |
| 21289 |
(! \POE@dict{@@x 0.4 mul @@y 0.6 mul})% |
| 21290 |
(! \POE@dict{@@x} 0.7 mul 0)(! \POE@dict{@@x} 0)% |
| 21291 |
(! \POE@dict{@@x} 0.7 mul 0)% |
| 21292 |
(! \POE@dict{@@x 0.4 mul @@y -0.6 mul})% |
| 21293 |
(! \POE@dict{@@x -0.4 mul @@y -0.6 mul})% |
| 21294 |
(! \POE@dict{@@x} -0.7 mul 0)% |
| 21295 |
\endgroup |
| 21296 |
\ignorespaces}% |
| 21297 |
% \end{macrocode} |
| 21298 |
% \end{macro} |
| 21299 |
% |
| 21300 |
% \subsubsection{optfilter} |
| 21301 |
% |
| 21302 |
% \begin{macro}{\optfilter@ref} |
| 21303 |
% \begin{macrocode} |
| 21304 |
\def\optfilter@ref{% |
| 21305 |
\POE@setref{% |
| 21306 |
\POE@key@filtersize\space 0.5 mul dup /@@y ED /@@x ED |
| 21307 |
\ifx\POE@key@innercompalign\POE@str@absolute\else |
| 21308 |
/@@ang \POE@key@filterangle\space def |
| 21309 |
\fi |
| 21310 |
}% |
| 21311 |
}% |
| 21312 |
\let\optfilter@nodes\POE@dipole@nodes |
| 21313 |
% \end{macrocode} |
| 21314 |
% \end{macro} |
| 21315 |
% |
| 21316 |
% \begin{macro}{\optfilter@comp} |
| 21317 |
% \begin{macrocode} |
| 21318 |
\def\optfilter@comp{% |
| 21319 |
\def\POE@filter@curve{% |
| 21320 |
\parametricplot[plotstyle=curve,arrows=-]{-1}{1}{% |
| 21321 |
\POE@dict{@@x} dup t mul 0.7 mul exch t Pi mul RadtoDeg |
| 21322 |
90 add cos 0.2 mul mul}% |
| 21323 |
}% |
| 21324 |
\def\POE@strike@line{% |
| 21325 |
\psline(!\POE@dict{@@x -0.3 mul @@y -0.15 mul})% |
| 21326 |
(!\POE@dict{@@x 0.3 mul @@y 0.15 mul}) |
| 21327 |
}% |
| 21328 |
\POE@comp@rectangle |
| 21329 |
\psrotate(\oenodeCenter{}){!\POE@dict{@@ang}}{% |
| 21330 |
\psset{style=FilterStyle}% |
| 21331 |
\ifx\POE@key@filtertype\POE@str@bandpass |
| 21332 |
\rput(!\POE@dict{0 @@x -0.5 mul}){\POE@strike@line\POE@filter@curve} |
| 21333 |
\rput(0, 0){% |
| 21334 |
\POE@usefiberorwirestyle |
| 21335 |
\POE@filter@curve} |
| 21336 |
\rput(!\POE@dict{0 @@x 0.5 mul}){\POE@strike@line\POE@filter@curve} |
| 21337 |
\else\ifx\POE@key@filtertype\POE@str@bandstop |
| 21338 |
\begingroup |
| 21339 |
\POE@usefiberorwirestyle |
| 21340 |
\rput(!\POE@dict{0 @@x -0.5 mul}){\POE@filter@curve} |
| 21341 |
\rput(!\POE@dict{0 @@x 0.5 mul}){\POE@filter@curve} |
| 21342 |
\endgroup |
| 21343 |
\rput(0,0){\POE@strike@line\POE@filter@curve} |
| 21344 |
\else\ifx\POE@key@filtertype\POE@str@lowpass |
| 21345 |
\rput(!\POE@dict{0 @@x -0.5 mul}){% |
| 21346 |
\POE@usefiberorwirestyle |
| 21347 |
\POE@filter@curve} |
| 21348 |
\rput(0, 0){\POE@strike@line\POE@filter@curve} |
| 21349 |
\rput(!\POE@dict{0 @@x 0.5 mul}){\POE@strike@line\POE@filter@curve} |
| 21350 |
\else\ifx\POE@key@filtertype\POE@str@highpass |
| 21351 |
\rput(!\POE@dict{0 @@x 0.5 mul}){% |
| 21352 |
\POE@usefiberorwirestyle |
| 21353 |
\POE@filter@curve} |
| 21354 |
\rput(0, 0){\POE@strike@line\POE@filter@curve} |
| 21355 |
\rput(!\POE@dict{0 @@x -0.5 mul}){\POE@strike@line\POE@filter@curve} |
| 21356 |
\fi\fi\fi\fi |
| 21357 |
}% |
| 21358 |
\ignorespaces}% |
| 21359 |
% \end{macrocode} |
| 21360 |
% \end{macro} |
| 21361 |
% |
| 21362 |
%\subsubsection{optamp} |
| 21363 |
% |
| 21364 |
% \begin{macro}{optamp@ref} |
| 21365 |
% \begin{macrocode} |
| 21366 |
\def\optamp@ref{% |
| 21367 |
\POE@setref{% |
| 21368 |
/@@x \POE@key@optampwidth\space 0.5 mul def |
| 21369 |
/@@y \POE@key@optampheight\space 0.5 mul def |
| 21370 |
}% |
| 21371 |
}% |
| 21372 |
% \end{macrocode} |
| 21373 |
% \end{macro} |
| 21374 |
% \begin{macro}{\optamp@nodes} |
| 21375 |
% \begin{macrocode} |
| 21376 |
\def\optamp@nodes{% |
| 21377 |
\newOptexpFiberComp{{@@x neg 0} {@@x 0}}% |
| 21378 |
}% |
| 21379 |
% \end{macrocode} |
| 21380 |
% \end{macro} |
| 21381 |
% |
| 21382 |
% \begin{macro}{\optamp@comp} |
| 21383 |
% \begin{macrocode} |
| 21384 |
\def\optamp@comp{% |
| 21385 |
\pspolygon(!\POE@dict{@@x 0})% |
| 21386 |
(!\POE@dict{@@x neg @@y})% |
| 21387 |
(!\POE@dict{@@x neg @@y neg}) |
| 21388 |
}% |
| 21389 |
% \end{macrocode} |
| 21390 |
% \end{macro} |
| 21391 |
% |
| 21392 |
%\subsubsection{polcontrol} |
| 21393 |
% |
| 21394 |
% \begin{macro}{polcontrol@ref} |
| 21395 |
% \begin{macrocode} |
| 21396 |
\def\polcontrol@ref{% |
| 21397 |
\ifx\POE@key@polcontroltype\POE@str@linear |
| 21398 |
\POE@setref{/@@x \POE@key@polcontrolsize\space 2 mul def}% |
| 21399 |
\else |
| 21400 |
\POE@setref{/@@x \POE@key@polcontrolsize\space 1.5 mul def}% |
| 21401 |
\fi |
| 21402 |
}% |
| 21403 |
% \end{macrocode} |
| 21404 |
% \end{macro} |
| 21405 |
% \begin{macro}{\polcontrol@nodes} |
| 21406 |
% \begin{macrocode} |
| 21407 |
\def\polcontrol@nodes{% |
| 21408 |
\newOptexpFiberComp{{@@x neg 0} {@@x 0}}% |
| 21409 |
}% |
| 21410 |
% \end{macrocode} |
| 21411 |
% \end{macro} |
| 21412 |
% |
| 21413 |
% \begin{macro}{\polcontrol@comp} |
| 21414 |
% \begin{macrocode} |
| 21415 |
\def\polcontrol@comp{% |
| 21416 |
\edef\@sz{\POE@key@polcontrolsize\space}% |
| 21417 |
\ifPOE@optexpenv |
| 21418 |
\psline[style=Fiber, arrows=-, ArrowInside=-](\oenodeIn{})(\oenodeOut{}) |
| 21419 |
\fi |
| 21420 |
\bgroup |
| 21421 |
\POE@usefiberorwirestyle |
| 21422 |
\ifx\POE@key@polcontroltype\POE@str@linear |
| 21423 |
\multips(! -2 \@sz mul \@sz)(! 2 \@sz mul 0){3}{% |
| 21424 |
\pscircle(0,0){\POE@key@polcontrolsize}% |
| 21425 |
}% |
| 21426 |
\else |
| 21427 |
\pscircle(! -1.5 \@sz mul \@sz neg){\POE@key@polcontrolsize} |
| 21428 |
\pscircle(! 0 \@sz){\POE@key@polcontrolsize}% |
| 21429 |
\pscircle(! 1.5 \@sz mul \@sz neg){\POE@key@polcontrolsize} |
| 21430 |
\fi |
| 21431 |
\egroup |
| 21432 |
\ifPOE@optexpenv\else |
| 21433 |
\psline[style=Fiber, arrows=-, ArrowInside=-](\oenodeIn{})(\oenodeOut{}) |
| 21434 |
\fi |
| 21435 |
\ignorespaces}% |
| 21436 |
% \end{macrocode} |
| 21437 |
% \end{macro} |
| 21438 |
% |
| 21439 |
% \subsubsection{optisolator} |
| 21440 |
% |
| 21441 |
% \begin{macro}{\optisolator@ref} |
| 21442 |
% \begin{macrocode} |
| 21443 |
\def\optisolator@ref{% |
| 21444 |
\POE@setref{% |
| 21445 |
/@@x \POE@key@isolatorwidth\space 0.5 mul def |
| 21446 |
/@@y \POE@key@isolatorheight\space 0.5 mul def |
| 21447 |
}% |
| 21448 |
}% |
| 21449 |
% \end{macrocode} |
| 21450 |
% \end{macro} |
| 21451 |
% |
| 21452 |
% \begin{macro}{\optisolator@comp} |
| 21453 |
% \begin{macrocode} |
| 21454 |
\def\optisolator@comp{% |
| 21455 |
\POE@comp@rectangle |
| 21456 |
\psline[style=IsolatorArrow, arrows=->]% |
| 21457 |
(!\POE@dict{@@x neg 0.6 mul 0})% |
| 21458 |
(!\POE@dict{@@x 0.6 mul 0}) |
| 21459 |
\ignorespaces}% |
| 21460 |
% \end{macrocode} |
| 21461 |
% \end{macro} |
| 21462 |
% |
| 21463 |
% \subsubsection{optfiberpolarizer} |
| 21464 |
% \begin{macro}{\optfiberpolarizer@ref} |
| 21465 |
% \begin{macrocode} |
| 21466 |
\def\optfiberpolarizer@ref{% |
| 21467 |
\POE@setref{% |
| 21468 |
/@@x \POE@key@fiberpolwidth\space 0.5 mul def |
| 21469 |
/@@y \POE@key@fiberpolheight\space 0.5 mul def |
| 21470 |
}% |
| 21471 |
}% |
| 21472 |
% \end{macrocode} |
| 21473 |
% \end{macro} |
| 21474 |
% |
| 21475 |
% \begin{macro}{\optfiberpolarizer@comp} |
| 21476 |
% \begin{macrocode} |
| 21477 |
\def\optfiberpolarizer@comp{% |
| 21478 |
\POE@comp@rectangle |
| 21479 |
\psline(!\POE@dict{@@x -0.2 mul @@y neg})(!\POE@dict{@@x 0.2 mul @@y}) |
| 21480 |
\ignorespaces}% |
| 21481 |
% \end{macrocode} |
| 21482 |
% \end{macro} |
| 21483 |
% |
| 21484 |
% \subsubsection{optswitch} |
| 21485 |
% |
| 21486 |
% \begin{macro}{\optswitch@ref} |
| 21487 |
% \begin{macrocode} |
| 21488 |
\def\optswitch@ref{% |
| 21489 |
\POE@setref{% |
| 21490 |
/@@x \POE@key@switchwidth\space 0.5 mul def |
| 21491 |
/@@y \POE@key@switchheight\space 0.5 mul def |
| 21492 |
}% |
| 21493 |
}% |
| 21494 |
% \end{macrocode} |
| 21495 |
% \end{macro} |
| 21496 |
% |
| 21497 |
% \begin{macro}{\optswitch@comp} |
| 21498 |
% \begin{macrocode} |
| 21499 |
\def\optswitch@comp{% |
| 21500 |
\POE@comp@rectangle |
| 21501 |
% \end{macrocode} |
| 21502 |
% storing the linewidth of the object allows for some aesthetic fine tuning |
| 21503 |
% \begin{macrocode} |
| 21504 |
\pstVerb{tx@Dict begin /@lw \POE@clw def end}% |
| 21505 |
\bgroup |
| 21506 |
\POE@usefiberorwirestyle |
| 21507 |
\psset{arrows=-, ArrowInside=-}% |
| 21508 |
\psline(! \POE@dict{@@x} neg 0)(! \POE@dict{@@x} -0.6 mul @lw sub 0)% |
| 21509 |
\psline(! \POE@dict{@@x} 0.6 mul 0)(! \POE@dict{@@x} 0)% |
| 21510 |
\egroup |
| 21511 |
\ifx\POE@key@switchstyle\POE@str@closed% |
| 21512 |
\bgroup |
| 21513 |
\POE@usefiberorwirestyle |
| 21514 |
\psdot[dotsize=3\pslinewidth](! \POE@dict{@@x} 0.6 mul 0)% |
| 21515 |
\psdot[dotsize=3\pslinewidth](! \POE@dict{@@x} -0.6 mul 0)% |
| 21516 |
\psline[arrows=-, ArrowInside=-, linewidth=1.5\pslinewidth]% |
| 21517 |
(! \POE@dict{@@x} -0.6 mul @lw)(! \POE@dict{@@x} 0.6 mul @lw)% |
| 21518 |
\egroup |
| 21519 |
\else |
| 21520 |
\psline[arrows=-, ArrowInside=-, linewidth=1.5\pslinewidth]% |
| 21521 |
(! \POE@dict{@@x} -0.6 mul @lw add @lw 0.5 mul)% |
| 21522 |
(! \POE@dict{@@x 0.45 mul @@y 0.6 mul})% |
| 21523 |
\pscircle(! \POE@dict{@@x} -0.6 mul 0){\pslinewidth}% |
| 21524 |
\psdot[dotsize=3\pslinewidth](! \POE@dict{@@x} 0.6 mul 0)% |
| 21525 |
\fi |
| 21526 |
\ignorespaces}% |
| 21527 |
% \end{macrocode} |
| 21528 |
% \end{macro} |
| 21529 |
% |
| 21530 |
% \subsubsection{fiberdelayline} |
| 21531 |
% |
| 21532 |
% \begin{macro}{\fiberdelayline@ref} |
| 21533 |
% \begin{macrocode} |
| 21534 |
\def\fiberdelayline@ref{% |
| 21535 |
\POE@setref{% |
| 21536 |
/@@y \POE@key@fdlheight\space 0.5 mul def |
| 21537 |
/@@x \POE@key@fdlwidth\space 0.5 mul def |
| 21538 |
}% |
| 21539 |
}% |
| 21540 |
% \end{macrocode} |
| 21541 |
% \end{macro} |
| 21542 |
% \begin{macrocode} |
| 21543 |
\def\POE@get@yarrowscale#1 #2 #3 #4\@nil{% |
| 21544 |
\def\POE@tempA{#3\space}% |
| 21545 |
}% |
| 21546 |
% \end{macrocode} |
| 21547 |
% \begin{macro}{\fiberdelayline@comp} |
| 21548 |
% \begin{macrocode} |
| 21549 |
\def\fiberdelayline@comp{% |
| 21550 |
\POE@comp@rectangle |
| 21551 |
\begingroup |
| 21552 |
\psset{style=FdlArrow} |
| 21553 |
\use@par |
| 21554 |
\pst@expandafter\POE@get@yarrowscale{\psk@arrowscale}\@nil |
| 21555 |
\def\@arrowshift{% |
| 21556 |
\psk@arrowlength\space \psk@arrowsize\space |
| 21557 |
\pst@number\pslinewidth\space mul add mul |
| 21558 |
\POE@tempA mul |
| 21559 |
@@y 2.9 mul @@x 0.6 mul atan 2 copy cos mul 3 1 roll sin mul |
| 21560 |
\tx@UserCoor abs exch abs exch\space |
| 21561 |
}% |
| 21562 |
\psline(! \POE@dict{@@x -0.4 mul @@y -1.6 mul})% |
| 21563 |
(! \POE@dict{@@x 0.2 mul @@y 1.3 mul \@arrowshift VecAdd}) |
| 21564 |
\endgroup |
| 21565 |
\ignorespaces}% |
| 21566 |
% \end{macrocode} |
| 21567 |
% \end{macro} |
| 21568 |
% |
| 21569 |
% \begin{macrocode} |
| 21570 |
\newOptexpDipole{optarrowcomp}{} |
| 21571 |
\def\optarrowcomp@ref{% |
| 21572 |
\POE@setref{% |
| 21573 |
\ifx\POE@key@arrowcompshape\POE@str@rectangle |
| 21574 |
/@@x \POE@key@arrowcompwidth\space 0.5 mul def |
| 21575 |
/@@y \POE@key@arrowcompheight\space 0.5 mul def |
| 21576 |
\else |
| 21577 |
\POE@key@arrowcompwidth\space\POE@key@arrowcompheight\space |
| 21578 |
min 0.5 mul dup /@@x ED /@@y ED |
| 21579 |
\fi |
| 21580 |
\POE@key@arrowcompangle\space dup 0 gt { |
| 21581 |
{ dup 180 ge { 180 sub } { exit } ifelse } loop |
| 21582 |
} { |
| 21583 |
{ dup 0 lt { 180 add } { exit } ifelse } loop |
| 21584 |
} ifelse dup /@arrowangle ED dup dup |
| 21585 |
@@y @@x atan gt exch @@y @@x neg atan lt and { |
| 21586 |
/@@dy @@y def |
| 21587 |
tan @@y exch div /@@dx ED |
| 21588 |
}{ |
| 21589 |
/@@dx @@x def |
| 21590 |
tan @@x mul /@@dy ED |
| 21591 |
} ifelse |
| 21592 |
}% |
| 21593 |
}% |
| 21594 |
\def\optarrowcomp@comp{% |
| 21595 |
\ifx\POE@key@arrowcompshape\POE@str@rectangle |
| 21596 |
\POE@comp@rectangle |
| 21597 |
\else |
| 21598 |
\pscircle(!\POE@dict{@@x0 @@y0}){!\POE@dict{@@x}} |
| 21599 |
\fi |
| 21600 |
\begingroup |
| 21601 |
% \end{macrocode} |
| 21602 |
% Set the style and execute the options directly, so we can use the correct |
| 21603 |
% arrowscale and linewidth for the calculations. |
| 21604 |
% \begin{macrocode} |
| 21605 |
\psset{style=ArrowCompStyle} |
| 21606 |
\use@par |
| 21607 |
\pst@expandafter\POE@get@yarrowscale{\psk@arrowscale}\@nil |
| 21608 |
\def\@arrowshift{% |
| 21609 |
\psk@arrowlength\space \psk@arrowsize\space |
| 21610 |
\pst@number\pslinewidth\space mul add mul |
| 21611 |
\POE@tempA mul |
| 21612 |
@arrowangle 2 copy cos mul 3 1 roll sin mul |
| 21613 |
\tx@UserCoor\space |
| 21614 |
}% |
| 21615 |
\ifx\POE@key@arrowcompshape\POE@str@rectangle |
| 21616 |
\psline(!\POE@dict{@@dx -1.5 mul @@dy -1.5 mul})% |
| 21617 |
(!\POE@dict{@@dx 1.3 mul @@dy 1.3 mul \@arrowshift VecAdd}) |
| 21618 |
\else |
| 21619 |
\psline(!\POE@dict{@arrowangle dup cos @@x -1.5 mul mul exch sin @@x -1.5 mul mul}) |
| 21620 |
(!\POE@dict{@arrowangle dup cos @@x 1.3 mul mul exch sin @@x 1.3 mul mul \@arrowshift VecAdd}) |
| 21621 |
\fi |
| 21622 |
\endgroup |
| 21623 |
\ignorespaces}% |
| 21624 |
% \end{macrocode} |
| 21625 |
% |
| 21626 |
% \begin{macrocode} |
| 21627 |
\newOptexpDipole{optbarcomp}{} |
| 21628 |
\def\optbarcomp@ref{% |
| 21629 |
\POE@setref{% |
| 21630 |
\ifx\POE@key@barcompshape\POE@str@rectangle |
| 21631 |
/@@x \POE@key@barcompwidth\space 0.5 mul def |
| 21632 |
/@@y \POE@key@barcompheight\space 0.5 mul def |
| 21633 |
\else |
| 21634 |
\POE@key@barcompwidth\space\POE@key@barcompheight\space |
| 21635 |
min 0.5 mul dup /@@x ED /@@y ED |
| 21636 |
\fi |
| 21637 |
\POE@key@barcompangle\space dup 0 gt { |
| 21638 |
{ dup 180 ge { 180 sub } { exit } ifelse } loop |
| 21639 |
} { |
| 21640 |
{ dup 0 lt { 180 add } { exit } ifelse } loop |
| 21641 |
} ifelse dup /@barangle ED dup dup |
| 21642 |
@@y @@x atan gt exch @@y @@x neg atan lt and { |
| 21643 |
/@@dy @@y def |
| 21644 |
tan @@y exch div /@@dx ED |
| 21645 |
}{ |
| 21646 |
/@@dx @@x def |
| 21647 |
tan @@x mul /@@dy ED |
| 21648 |
} ifelse |
| 21649 |
}% |
| 21650 |
}% |
| 21651 |
\def\optbarcomp@comp{% |
| 21652 |
\ifx\POE@key@barcompshape\POE@str@rectangle |
| 21653 |
\POE@comp@rectangle |
| 21654 |
\psline[style=BarCompStyle](!\POE@dict{ @@dx neg @@dy neg })% |
| 21655 |
(!\POE@dict{@@dx @@dy}) |
| 21656 |
\else |
| 21657 |
\pscircle(!\POE@dict{@@x0 @@y0}){!\POE@dict{@@x}} |
| 21658 |
\psline[style=BarCompStyle]% |
| 21659 |
(!\POE@dict{@barangle dup cos @@x neg mul exch sin @@x neg mul}) |
| 21660 |
(!\POE@dict{@barangle dup cos @@x mul exch sin @@x mul}) |
| 21661 |
\fi |
| 21662 |
\ignorespaces}% |
| 21663 |
% \end{macrocode} |
| 21664 |
% |
| 21665 |
% |
| 21666 |
% \subsubsection{fiberbox} |
| 21667 |
% \begin{macro}{fiberbox@ref} |
| 21668 |
% \begin{macrocode} |
| 21669 |
\def\fiberbox@ref{% |
| 21670 |
\POE@setref{% |
| 21671 |
/@@x \POE@key@fiberboxwidth\space 0.5 mul def |
| 21672 |
@@inht 0 eq @@outht 0 eq and { |
| 21673 |
/@@inht \POE@key@fiberboxcountin\space\POE@key@fiberboxsepin\space mul def |
| 21674 |
/@@outht \POE@key@fiberboxcountout\space\POE@key@fiberboxsepout\space mul def |
| 21675 |
} if |
| 21676 |
@@inht \POE@key@fiberboxcountin\space dup 1 add 3 1 roll div mul |
| 21677 |
@@outht \POE@key@fiberboxcountout\space dup 1 add 3 1 roll div mul |
| 21678 |
max |
| 21679 |
\POE@key@fiberboxheight\space dup @@inht @@outht max gt { |
| 21680 |
exch |
| 21681 |
} if pop 0.5 mul /@@y exch def |
| 21682 |
}% |
| 21683 |
}% |
| 21684 |
% \end{macrocode} |
| 21685 |
% \end{macro} |
| 21686 |
% \begin{macro}{\fiberbox@nodes} |
| 21687 |
% \begin{macrocode} |
| 21688 |
\def\fiberbox@nodes{% |
| 21689 |
\newOptexpFiberComp{% |
| 21690 |
0 1 \POE@key@fiberboxcountin\space 1 sub { |
| 21691 |
\POE@key@fiberboxcountin\space 1 sub 0.5 mul dup 3 -1 roll sub exch |
| 21692 |
0 gt { |
| 21693 |
@@inht \POE@key@fiberboxcountin\space 1 sub div mul |
| 21694 |
} if |
| 21695 |
@@x neg exch ToVec |
| 21696 |
} for |
| 21697 |
0 1 \POE@key@fiberboxcountout\space 1 sub { |
| 21698 |
\POE@key@fiberboxcountout\space 1 sub 0.5 mul dup 3 -1 roll sub exch |
| 21699 |
0 gt { |
| 21700 |
@@outht \POE@key@fiberboxcountout\space 1 sub div mul |
| 21701 |
} if |
| 21702 |
@@x exch ToVec |
| 21703 |
} for |
| 21704 |
} |
| 21705 |
}% |
| 21706 |
\let\fiberbox@comp\POE@comp@rectangle |
| 21707 |
% \end{macrocode} |
| 21708 |
% \end{macro} |
| 21709 |
% |
| 21710 |
% |
| 21711 |
% \subsubsection{optcoupler} |
| 21712 |
% \begin{macro}{\optcoupler@nodes} |
| 21713 |
% \begin{macrocode} |
| 21714 |
\def\optcoupler@nodes{% |
| 21715 |
\newOptexpFiberComp{% |
| 21716 |
{@@x neg @@y0 @@sep add} |
| 21717 |
{@@x neg @@y0 @@sep sub} |
| 21718 |
{@@x @@y0 @@sep add} |
| 21719 |
{@@x @@y0 @@sep sub} }% |
| 21720 |
\pnode(0,0){\oenodeCenter{}} |
| 21721 |
}% |
| 21722 |
% \end{macrocode} |
| 21723 |
% \end{macro} |
| 21724 |
% |
| 21725 |
% \begin{macro}{\POE@coupler@ref} |
| 21726 |
% \begin{macrocode} |
| 21727 |
\def\POE@coupler@ref{% |
| 21728 |
\POE@setref{% |
| 21729 |
/@@x \POE@key@couplerwidth\space 0.5 mul def |
| 21730 |
\ifx\POE@key@couplertype\POE@str@none |
| 21731 |
\ifx\POE@key@couplersep\@empty |
| 21732 |
/@@y \POE@key@couplerheight\space 0.5 mul 0.05 0.2 0.8 mul div mul def |
| 21733 |
\else |
| 21734 |
/@@y \POE@key@couplersep\space 0.5 mul def |
| 21735 |
\fi |
| 21736 |
/@@sep @@y def |
| 21737 |
\else |
| 21738 |
/@@y \POE@key@couplerheight\space 0.5 mul def |
| 21739 |
\ifx\POE@key@couplersep\@empty |
| 21740 |
\ifx\POE@key@couplertype\POE@str@ellipse |
| 21741 |
/@@sep @@y 0.05 0.2 0.8 mul div mul def |
| 21742 |
\else |
| 21743 |
/@@sep @@y 0.5 mul def |
| 21744 |
\fi |
| 21745 |
\else |
| 21746 |
/@@sep \POE@key@couplersep\space 0.5 mul def |
| 21747 |
\fi |
| 21748 |
\fi |
| 21749 |
/@@y0 @@sep |
| 21750 |
\ifx\POE@key@coupleralign\POE@str@bottom |
| 21751 |
\else\ifx\POE@key@coupleralign\POE@str@top |
| 21752 |
neg |
| 21753 |
\else |
| 21754 |
pop 0 |
| 21755 |
\fi\fi |
| 21756 |
def |
| 21757 |
}% |
| 21758 |
}% |
| 21759 |
% \end{macrocode} |
| 21760 |
% \end{macro} |
| 21761 |
% |
| 21762 |
% \begin{macrocode} |
| 21763 |
\let\optcoupler@ref\POE@coupler@ref |
| 21764 |
% \end{macrocode} |
| 21765 |
% |
| 21766 |
% \begin{macro}{\wdmcoupler@ref} |
| 21767 |
% The \cs{wdmcoupler} and \cs{wdmsplitter} need a little correction for centered alignment and \opt{couplertype} set to \opt{none}. |
| 21768 |
% \begin{macrocode} |
| 21769 |
\def\wdmcoupler@ref{% |
| 21770 |
\POE@coupler@ref |
| 21771 |
\ifx\POE@key@couplertype\POE@str@none |
| 21772 |
\ifx\POE@key@coupleralign\POE@str@center |
| 21773 |
\POE@setref{/@@y 0 def }% |
| 21774 |
\fi |
| 21775 |
\fi |
| 21776 |
}% |
| 21777 |
\let\wdmsplitter@ref\wdmcoupler@ref |
| 21778 |
% \end{macrocode} |
| 21779 |
% \end{macro} |
| 21780 |
% |
| 21781 |
% \begin{macro}{\optcoupler@comp} |
| 21782 |
% \begin{macrocode} |
| 21783 |
\def\optcoupler@comp{% |
| 21784 |
\ifx\POE@key@couplertype\POE@str@none |
| 21785 |
\psline[style=Fiber](\oenode{1}{})(\oenode{3}{}) |
| 21786 |
\psline[style=Fiber](\oenode{2}{})(\oenode{N}{}) |
| 21787 |
\fi |
| 21788 |
\POE@coupler@comp |
| 21789 |
}% |
| 21790 |
% \end{macrocode} |
| 21791 |
% \end{macro} |
| 21792 |
% |
| 21793 |
% \begin{macro}{\POE@coupler@comp} |
| 21794 |
% \begin{macrocode} |
| 21795 |
\def\POE@coupler@comp{% |
| 21796 |
\ifx\POE@key@couplertype\POE@str@none |
| 21797 |
\else\ifx\POE@key@couplertype\POE@str@ellipse |
| 21798 |
\psellipse(! 0 \POE@dict{@@y0})(! \POE@dict{@@x @@y}) |
| 21799 |
\else |
| 21800 |
\POE@comp@rectangle |
| 21801 |
\ifx\POE@key@couplertype\POE@str@cross |
| 21802 |
\psline(! \POE@dict{@@x -0.5 mul @@y0 @@y 0.5 mul sub})% |
| 21803 |
(! \POE@dict{@@x 0.5 mul @@y0 @@y 0.5 mul add})% |
| 21804 |
\psline(! \POE@dict{@@x -0.5 mul @@y0 @@y 0.5 mul add})% |
| 21805 |
(! \POE@dict{@@x 0.5 mul @@y0 @@y 0.5 mul sub})% |
| 21806 |
\fi |
| 21807 |
\fi\fi |
| 21808 |
\ifx\POE@key@couplertype\POE@str@cross\else |
| 21809 |
\ifPOE@variable |
| 21810 |
\begingroup |
| 21811 |
% \end{macrocode} |
| 21812 |
% we set the style this way to be able to access the arrow and line parameters |
| 21813 |
% already before the psline command |
| 21814 |
% \begin{macrocode} |
| 21815 |
\psset{style=VariableCoupler} |
| 21816 |
\use@par |
| 21817 |
\pst@expandafter\POE@get@yarrowscale{\psk@arrowscale}\@nil |
| 21818 |
\def\@arrowshift{% |
| 21819 |
\psk@arrowlength\space\psk@arrowsize\space |
| 21820 |
\pst@number\pslinewidth\space mul add mul |
| 21821 |
\POE@tempA mul |
| 21822 |
1.6 0.8 atan 2 copy cos mul 3 1 roll sin mul |
| 21823 |
\tx@UserCoor abs exch abs exch\space |
| 21824 |
}% |
| 21825 |
\psline(!\POE@dict{@@x -0.4 mul @@y0 @@x sub})% |
| 21826 |
(!\POE@dict{@@x 0.4 mul @@x 0.7 mul @@y0 add |
| 21827 |
\@arrowshift VecAdd}) |
| 21828 |
\endgroup |
| 21829 |
\fi |
| 21830 |
\fi |
| 21831 |
}% |
| 21832 |
% \end{macrocode} |
| 21833 |
% \end{macro} |
| 21834 |
% |
| 21835 |
% \subsubsection{wdmcoupler} |
| 21836 |
% \begin{macro}{\wdmcoupler@nodes} |
| 21837 |
% \begin{macrocode} |
| 21838 |
\def\wdmcoupler@nodes{% |
| 21839 |
\newOptexpFiberComp{% |
| 21840 |
% \end{macrocode} |
| 21841 |
% A coupler may have only a single input node, which must then be duplicated |
| 21842 |
% \begin{macrocode} |
| 21843 |
/@@nodecount \the\POE@couplernodecount\space dup 1 le { pop 2 } if def |
| 21844 |
@@y0 \POE@key@couplersep\space 0.5 mul add |
| 21845 |
\POE@key@couplersep\space @@nodecount 1 sub div |
| 21846 |
\ifx\POE@key@couplertype\POE@str@none |
| 21847 |
\ifx\POE@key@coupleralign\POE@str@center |
| 21848 |
pop pop @@y0 0 |
| 21849 |
\fi |
| 21850 |
\fi |
| 21851 |
1 1 @@nodecount |
| 21852 |
{ |
| 21853 |
3 copy 1 sub mul sub exch pop [ @@x neg 3 -1 roll ] cvx 3 1 roll |
| 21854 |
} for |
| 21855 |
pop pop |
| 21856 |
{@@x 0} |
| 21857 |
}% |
| 21858 |
\pnode(0,0){\oenodeCenter{}} |
| 21859 |
}% |
| 21860 |
% \end{macrocode} |
| 21861 |
% \end{macro} |
| 21862 |
% |
| 21863 |
% \begin{macro}{\wdmcoupler@comp} |
| 21864 |
% \begin{macrocode} |
| 21865 |
\def\wdmcoupler@comp{% |
| 21866 |
\ifx\POE@key@couplertype\POE@str@none |
| 21867 |
\ifx\POE@key@coupleralign\POE@str@top |
| 21868 |
\psline[style=Fiber](\oenode{1}{})(\oenodeOut{}) |
| 21869 |
\psline[style=Fiber]% |
| 21870 |
(!/N@\oenodeOut{} \POE@dict{@GetCenter} |
| 21871 |
\tx@UserCoor \POE@key@couplersep\space sub)(\oenode{2}{}) |
| 21872 |
\else |
| 21873 |
\psline[style=Fiber](\oenode{\the\POE@couplernodecount}{})(\oenodeOut{}) |
| 21874 |
\ifx\POE@key@coupleralign\POE@str@bottom |
| 21875 |
\psline[style=Fiber]% |
| 21876 |
(!/N@\oenodeOut{} \POE@dict{@GetCenter} |
| 21877 |
\tx@UserCoor \POE@key@couplersep\space add)(\oenode{1}{}) |
| 21878 |
\fi |
| 21879 |
\fi |
| 21880 |
\fi |
| 21881 |
\POE@coupler@comp |
| 21882 |
}% |
| 21883 |
% \end{macrocode} |
| 21884 |
% \end{macro} |
| 21885 |
% |
| 21886 |
% \subsubsection{wdmsplitter} |
| 21887 |
% \begin{macro}{\wdmsplitter@nodes} |
| 21888 |
% \begin{macrocode} |
| 21889 |
\def\wdmsplitter@nodes{% |
| 21890 |
\newOptexpFiberComp{% |
| 21891 |
{@@x neg 0} |
| 21892 |
% \end{macrocode} |
| 21893 |
% A coupler may have only a single output node, which must then be duplicated |
| 21894 |
% \begin{macrocode} |
| 21895 |
/@@nodecount \the\POE@couplernodecount\space dup 2 gt { 1 sub } if def |
| 21896 |
@@y0 \POE@key@couplersep\space 0.5 mul add |
| 21897 |
\POE@key@couplersep\space @@nodecount 1 sub div |
| 21898 |
\ifx\POE@key@couplertype\POE@str@none |
| 21899 |
\ifx\POE@key@coupleralign\POE@str@center |
| 21900 |
pop pop @@y0 0 |
| 21901 |
\fi |
| 21902 |
\fi |
| 21903 |
1 1 @@nodecount |
| 21904 |
{ |
| 21905 |
3 copy 1 sub mul sub exch pop [ @@x 3 -1 roll ] cvx 3 1 roll |
| 21906 |
} for |
| 21907 |
pop pop |
| 21908 |
}% |
| 21909 |
\pnode(0,0){\oenodeCenter{}} |
| 21910 |
}% |
| 21911 |
% \end{macrocode} |
| 21912 |
% \end{macro} |
| 21913 |
% |
| 21914 |
% \begin{macro}{\wdmsplitter@comp} |
| 21915 |
% \begin{macrocode} |
| 21916 |
\def\wdmsplitter@comp{% |
| 21917 |
\ifx\POE@key@couplertype\POE@str@none |
| 21918 |
\ifx\POE@key@coupleralign\POE@str@top |
| 21919 |
\psline[style=Fiber](\oenodeIn{})(\oenode{2}{}) |
| 21920 |
\psline[style=Fiber](! \POE@dict{/N@\oenodeIn{} @GetCenter} |
| 21921 |
\tx@UserCoor \POE@key@couplersep\space sub)(\oenode{N}{}) |
| 21922 |
\else |
| 21923 |
\psline[style=Fiber](\oenodeIn{})(\oenode{N}{}) |
| 21924 |
\ifx\POE@key@coupleralign\POE@str@bottom |
| 21925 |
\psline[style=Fiber](! \POE@dict{/N@\oenodeIn{} @GetCenter} |
| 21926 |
\tx@UserCoor \POE@key@couplersep\space add)(\oenode{2}{}) |
| 21927 |
\fi |
| 21928 |
\fi |
| 21929 |
\fi |
| 21930 |
\POE@coupler@comp |
| 21931 |
}% |
| 21932 |
% \end{macrocode} |
| 21933 |
% \end{macro} |
| 21934 |
% |
| 21935 |
% \subsubsection{optcirculator} |
| 21936 |
% |
| 21937 |
% \begin{macro}{optcirculator@ref} |
| 21938 |
% \begin{macrocode} |
| 21939 |
\def\optcirculator@ref{% |
| 21940 |
\POE@setref{\POE@key@optcircsize\space 0.5 mul dup /@@x ED /@@y ED }% |
| 21941 |
}% |
| 21942 |
% \end{macrocode} |
| 21943 |
% \end{macro} |
| 21944 |
% \begin{macro}{\optcirculator@nodes} |
| 21945 |
% \begin{macrocode} |
| 21946 |
\def\optcirculator@nodes{% |
| 21947 |
\newOptexpFiberComp{{@@x neg 0} {0 @@y neg} {@@x 0}}% |
| 21948 |
}% |
| 21949 |
% \end{macrocode} |
| 21950 |
% \end{macro} |
| 21951 |
% |
| 21952 |
% \begin{macro}{\optcirculator@comp} |
| 21953 |
% \begin{macrocode} |
| 21954 |
\def\optcirculator@comp{% |
| 21955 |
\edef\@sz{\POE@key@optcircsize\space 0.5 mul }% |
| 21956 |
\pscircle(0,0){! \@sz} |
| 21957 |
\psarc[style=OptCircArrow](0,0)% |
| 21958 |
{! \POE@key@optcircsize\space 0.5 mul}% |
| 21959 |
{\POE@key@optcircangleA}% |
| 21960 |
{\POE@key@optcircangleB} |
| 21961 |
}% |
| 21962 |
% \end{macrocode} |
| 21963 |
% \end{macro} |
| 21964 |
% |
| 21965 |
% \subsubsection{fibercollimator} |
| 21966 |
% |
| 21967 |
% \begin{macro}{fibercollimator@ref} |
| 21968 |
% \begin{macrocode} |
| 21969 |
\def\fibercollimator@ref{% |
| 21970 |
\POE@setref{% |
| 21971 |
/@@x \POE@key@fibercolwidth\space 0.5 mul def |
| 21972 |
/@@y \POE@key@fibercolheight\space 0.5 mul def}% |
| 21973 |
}% |
| 21974 |
% \end{macrocode} |
| 21975 |
% \end{macro} |
| 21976 |
% \begin{macro}{\fibercollimator@nodes} |
| 21977 |
% \begin{macrocode} |
| 21978 |
\def\fibercollimator@nodes{% |
| 21979 |
\pnode(!\POE@dict{@@x neg} 0){\oenodeIn{}} |
| 21980 |
\newOptexpComp{{@@x neg 0} {0 1} @@y neg @@y trans {PlainIfc} |
| 21981 |
{@@x 0} {0 1} 0 0 trans {PlainIfc} 1 }% |
| 21982 |
}% |
| 21983 |
% \end{macrocode} |
| 21984 |
% \end{macro} |
| 21985 |
% |
| 21986 |
% \begin{macro}{\fibercollimator@comp} |
| 21987 |
% \begin{macrocode} |
| 21988 |
\def\fibercollimator@comp{% |
| 21989 |
\pspolygon(!\POE@dict{@@x neg \POE@clwh add @@y neg})% |
| 21990 |
(!\POE@dict{@@x 0})% |
| 21991 |
(!\POE@dict{@@x neg \POE@clwh add @@y}) |
| 21992 |
}% |
| 21993 |
% \end{macrocode} |
| 21994 |
% \end{macro} |
| 21995 |
% |
| 21996 |
% \subsection{Electrical components} |
| 21997 |
% |
| 21998 |
% \subsubsection{elecsynthesizer} |
| 21999 |
% |
| 22000 |
% \subsubsection{elecmixer} |
| 22001 |
% |
| 22002 |
% \begin{macro}{\elecmixer} |
| 22003 |
% \begin{macrocode} |
| 22004 |
\def\elecmixer{\pst@object{elecmixer}}% |
| 22005 |
\def\elecmixer@i(#1)(#2)(#3){% |
| 22006 |
\@ifnextchar\bgroup% |
| 22007 |
{\elecmixer@ii(#1)(#2)(#3)}% |
| 22008 |
{\elecmixer@ii(#1)(#2)(#3){}}% |
| 22009 |
}% |
| 22010 |
\def\elecmixer@ii(#1)(#2)(#3)#4{% |
| 22011 |
\addafter@par{ref@angle=0}% |
| 22012 |
\begin@OptexpObj |
| 22013 |
\POE@calcCircRefNodes{#1}{#2}{#3}% |
| 22014 |
\POE@drawcomponent{elecmixer}{#4} |
| 22015 |
\ifPOE@backlayer |
| 22016 |
\ifPOE@wirepresetin@top |
| 22017 |
\drawwire@{WireIn}[stopnode=1](#1){} |
| 22018 |
\else\ifPOE@fiberin@top |
| 22019 |
\drawfiber@{FiberIn}[stopnode=1](#1){} |
| 22020 |
\fi\fi |
| 22021 |
\ifPOE@wirepresetout@top |
| 22022 |
\drawwire@{WireOut1}[startnode=N]{}(#2) |
| 22023 |
\else\ifPOE@fiberout@top |
| 22024 |
\drawfiber@{FiberOut1}[startnode=N]{}(#2) |
| 22025 |
\fi\fi |
| 22026 |
\ifPOE@wirepresetout@bottom |
| 22027 |
\drawwire@{WireOut2}[startnode=2, wirealign=center]{}(#3) |
| 22028 |
\else\ifPOE@fiberout@bottom |
| 22029 |
\drawfiber@{FiberOut2}[starnode=2, fiberalign=center]{}(#3) |
| 22030 |
\fi\fi |
| 22031 |
\fi |
| 22032 |
\end@OptexpObj |
| 22033 |
}% |
| 22034 |
% \end{macrocode} |
| 22035 |
% \end{macro} |
| 22036 |
% |
| 22037 |
% \begin{macro}{elecmixer@ref} |
| 22038 |
% \begin{macrocode} |
| 22039 |
\def\elecmixer@ref{% |
| 22040 |
\POE@setref{\POE@key@elecmixersize\space 0.5 mul dup /@@x ED /@@y ED }% |
| 22041 |
}% |
| 22042 |
% \end{macrocode} |
| 22043 |
% \end{macro} |
| 22044 |
% \begin{macro}{\elecmixer@nodes} |
| 22045 |
% \begin{macrocode} |
| 22046 |
\def\elecmixer@nodes{% |
| 22047 |
\newOptexpElecComp{{@@x neg 0} {0 @@y neg} {@@x 0}}% |
| 22048 |
}% |
| 22049 |
% \end{macrocode} |
| 22050 |
% \end{macro} |
| 22051 |
% |
| 22052 |
% \begin{macro}{\elecmixer@comp} |
| 22053 |
% \begin{macrocode} |
| 22054 |
\def\elecmixer@comp{% |
| 22055 |
\edef\@sz{\POE@key@elecmixersize\space 0.5 mul }% |
| 22056 |
\pscircle(0,0){! \@sz} |
| 22057 |
\psline(!\@sz 2 sqrt div neg dup)(!\@sz 2 sqrt div dup) |
| 22058 |
\psline(!\@sz 2 sqrt div dup neg exch)(!\@sz 2 sqrt div dup neg) |
| 22059 |
}% |
| 22060 |
% \end{macrocode} |
| 22061 |
% \end{macro} |
| 22062 |
% |
| 22063 |
% \subsubsection{Electrical coupler} |
| 22064 |
% |
| 22065 |
% \begin{macro}{\eleccoupler} |
| 22066 |
% \begin{macrocode} |
| 22067 |
\def\eleccoupler{\pst@object{eleccoupler}}% |
| 22068 |
\def\eleccoupler@i(#1)(#2){% |
| 22069 |
\@ifnextchar(%) |
| 22070 |
{\eleccoupler@ii(#1)(#2)}% |
| 22071 |
{\eleccoupler@ii(#1)(#1)(#2)(#2)}% |
| 22072 |
}% |
| 22073 |
\def\eleccoupler@ii(#1)(#2)(#3)(#4){% |
| 22074 |
\@ifnextchar\bgroup% |
| 22075 |
{\eleccoupler@iii(#1)(#2)(#3)(#4)}% |
| 22076 |
{\eleccoupler@iii(#1)(#2)(#3)(#4){}}% |
| 22077 |
}% |
| 22078 |
\def\eleccoupler@iii(#1)(#2)(#3)(#4)#5{% |
| 22079 |
\begin@OptexpObj |
| 22080 |
\ifPOE@backlayer |
| 22081 |
\ifx\POE@key@eleccoupleralign\POE@str@top |
| 22082 |
\pnode(#1){\oenodeRefA{}} |
| 22083 |
\pnode(#3){\oenodeRefB{}} |
| 22084 |
\else\ifx\POE@key@eleccoupleralign\POE@str@bottom |
| 22085 |
\pnode(#2){\oenodeRefA{}} |
| 22086 |
\pnode(#4){\oenodeRefB{}} |
| 22087 |
\else |
| 22088 |
\pst@getcoor{#1}\POE@tempa% |
| 22089 |
\pst@getcoor{#2}\POE@tempb% |
| 22090 |
\pnode(!\POE@tempa \POE@tempb |
| 22091 |
\POE@dict{VecAdd 0.5 VecScale} |
| 22092 |
\tx@UserCoor){\oenodeRefA{}} |
| 22093 |
\pst@getcoor{#3}\POE@tempa% |
| 22094 |
\pst@getcoor{#4}\POE@tempb% |
| 22095 |
\pnode(!\POE@tempa \POE@tempb |
| 22096 |
\POE@dict{VecAdd 0.5 VecScale} |
| 22097 |
\tx@UserCoor){\oenodeRefB{}} |
| 22098 |
\fi\fi |
| 22099 |
\fi |
| 22100 |
\POE@drawcomponent{eleccoupler}{#5} |
| 22101 |
\ifPOE@backlayer |
| 22102 |
\POE@Verb{% |
| 22103 |
(1) (3) (\oenode{}{}) CorrectDipoleIfc |
| 22104 |
(2) (4) (\oenode{}{}) CorrectDipoleIfc |
| 22105 |
}% |
| 22106 |
\ifPOE@wirepresetin@top |
| 22107 |
\drawwire@{WireIn1}[stopnode=1](#1){} |
| 22108 |
\else\ifPOE@fiberin@top |
| 22109 |
\drawfiber@{FiberIn1}[stopnode=1](#1){} |
| 22110 |
\fi\fi |
| 22111 |
\ifPOE@wirepresetout@top |
| 22112 |
\drawwire@{WireOut1}[startnode=3](#3){} |
| 22113 |
\else\ifPOE@fiberout@top |
| 22114 |
\drawfiber@{FiberOut1}[startnode=3](#3){} |
| 22115 |
\fi\fi |
| 22116 |
\ifx\POE@key@eleccouplertype\POE@str@directional |
| 22117 |
\ifx\POE@key@eleccouplerinput\POE@str@left |
| 22118 |
\ifPOE@wirepresetout@bottom |
| 22119 |
\drawwire@{WireOut2}[startnode=N](#4){} |
| 22120 |
\else\ifPOE@fiberout@bottom |
| 22121 |
\drawfiber@{FiberOut2}[startnode=N](#4){} |
| 22122 |
\fi\fi |
| 22123 |
\else |
| 22124 |
\ifPOE@wirepresetin@bottom |
| 22125 |
\drawwire@{WireIn2}[stopnode=2](#2){} |
| 22126 |
\else\ifPOE@fiberin@bottom |
| 22127 |
\drawfiber@{FiberIn2}[stopnode=2](#2){} |
| 22128 |
\fi\fi |
| 22129 |
\fi |
| 22130 |
\else |
| 22131 |
\ifPOE@wirepresetout@bottom |
| 22132 |
\drawwire@{WireOut2}[startnode=N](#4){} |
| 22133 |
\else\ifPOE@fiberout@bottom |
| 22134 |
\drawfiber@{FiberOut2}[startnode=N](#4){} |
| 22135 |
\fi\fi |
| 22136 |
\ifPOE@wirepresetin@bottom |
| 22137 |
\drawwire@{WireIn2}[stopnode=2](#2){} |
| 22138 |
\else\ifPOE@fiberin@bottom |
| 22139 |
\drawfiber@{FiberIn2}[stopnode=2](#2){} |
| 22140 |
\fi\fi |
| 22141 |
\fi |
| 22142 |
\fi |
| 22143 |
\end@OptexpObj |
| 22144 |
}% |
| 22145 |
% \end{macrocode} |
| 22146 |
% \end{macro} |
| 22147 |
% |
| 22148 |
% \begin{macro}{\eleccoupler@ref} |
| 22149 |
% \begin{macrocode} |
| 22150 |
\def\eleccoupler@ref{% |
| 22151 |
\POE@setref{% |
| 22152 |
/@@x \POE@key@eleccouplerwidth\space 0.5 mul def |
| 22153 |
/@@y \POE@key@eleccouplerheight\space 0.5 mul def |
| 22154 |
\ifx\POE@key@eleccouplersep\@empty |
| 22155 |
/@@sep @@y 0.75 mul def |
| 22156 |
\else |
| 22157 |
/@@sep \POE@key@eleccouplersep\space 0.5 mul def |
| 22158 |
\fi |
| 22159 |
/@@y0 @@sep |
| 22160 |
\ifx\POE@key@eleccoupleralign\POE@str@bottom |
| 22161 |
\else\ifx\POE@key@eleccoupleralign\POE@str@top |
| 22162 |
neg |
| 22163 |
\else |
| 22164 |
pop 0 |
| 22165 |
\fi\fi |
| 22166 |
def |
| 22167 |
}% |
| 22168 |
}% |
| 22169 |
% \end{macrocode} |
| 22170 |
% \end{macro} |
| 22171 |
% |
| 22172 |
% \begin{macro}{\eleccoupler@nodes} |
| 22173 |
% \begin{macrocode} |
| 22174 |
\def\eleccoupler@nodes{% |
| 22175 |
\newOptexpElecComp{% |
| 22176 |
{@@x neg @@y0 @@sep add} |
| 22177 |
{@@x neg @@y0 @@sep sub} |
| 22178 |
{@@x @@y0 @@sep add} |
| 22179 |
{@@x @@y0 @@sep sub} }% |
| 22180 |
\pnode(0,0){\oenodeCenter{}} |
| 22181 |
}% |
| 22182 |
% \end{macrocode} |
| 22183 |
% \end{macro} |
| 22184 |
% |
| 22185 |
% \begin{macro}{\eleccoupler@comp} |
| 22186 |
% \begin{macrocode} |
| 22187 |
\def\eleccoupler@comp{% |
| 22188 |
\POE@comp@rectangle |
| 22189 |
\psline(!\POE@dict{@@x -0.7 mul @@y0 @@sep sub @@y 0.15 mul add})% |
| 22190 |
(!\POE@dict{@@x 0.7 mul @@y0 @@sep add @@y 0.15 mul sub})% |
| 22191 |
\psline(!\POE@dict{@@x 0.7 mul @@y0 @@sep sub @@y 0.15 mul add})% |
| 22192 |
(!\POE@dict{@@x -0.7 mul @@y0 @@sep add @@y 0.15 mul sub})% |
| 22193 |
\psline[style=Wire, arrows=-, ArrowInside=-](\oenodeIfc{1}{})(\oenodeIfc{3}{}) |
| 22194 |
\ifx\POE@key@eleccouplertype\POE@str@directional |
| 22195 |
\ifx\POE@key@eleccouplerinput\POE@str@left |
| 22196 |
\psline[style=Wire, arrows=-, ArrowInside=-]([Xnodesep=-0.1]\oenodeIfc{2}{})(\oenodeIfc{N}{}) |
| 22197 |
\else |
| 22198 |
\psline[style=Wire, arrows=-, ArrowInside=-](\oenodeIfc{2}{})([Xnodesep=0.1]\oenodeIfc{N}{}) |
| 22199 |
\fi |
| 22200 |
\pscustom[style=OptComp]{% |
| 22201 |
\moveto(!\POE@dict{@@x 0.15 add |
| 22202 |
\ifx\POE@key@eleccouplerinput\POE@str@left neg \fi |
| 22203 |
@@y0 @@sep sub 0.14 add}) |
| 22204 |
\rlineto(0,-0.04) |
| 22205 |
\multido{\rx=0.12+-0.08}{4}{% |
| 22206 |
\rlineto(0.05,-0.02) |
| 22207 |
\rlineto(-0.1,-0.04) |
| 22208 |
\rlineto(0.05,-0.02) |
| 22209 |
}% |
| 22210 |
\rlineto(0,-0.04) |
| 22211 |
}% |
| 22212 |
\else |
| 22213 |
\psline[style=Wire, arrows=-, ArrowInside=-](\oenodeIfc{2}{})(\oenodeIfc{N}{}) |
| 22214 |
\fi |
| 22215 |
}% |
| 22216 |
% \end{macrocode} |
| 22217 |
% \end{macro} |
| 22218 |
% |
| 22219 |
% \begin{macro}{\newOptexpElecDipole} |
| 22220 |
% \begin{macrocode} |
| 22221 |
\def\newOptexpElecDipole{% |
| 22222 |
\@ifnextchar[%] |
| 22223 |
{\POE@newelecdipole}{\POE@newelecdipole[]}% |
| 22224 |
}% |
| 22225 |
% \end{macrocode} |
| 22226 |
% \end{macro} |
| 22227 |
% |
| 22228 |
% \begin{macro}{\POE@newfiberdipole} |
| 22229 |
% \begin{macrocode} |
| 22230 |
\def\POE@newelecdipole[#1]#2{% |
| 22231 |
\@ifnextchar\bgroup |
| 22232 |
{\POE@newelecdipole@i[#1]{#2}}{\POE@newelecdipole@i[#1]{#2}{}}% |
| 22233 |
}% |
| 22234 |
% \end{macrocode} |
| 22235 |
% \end{macro} |
| 22236 |
% \begin{macro}{\POE@newelecdipole@i} |
| 22237 |
% \begin{macrocode} |
| 22238 |
\def\POE@newelecdipole@i[#1]#2#3{% |
| 22239 |
\@ifundefined{#2@i}{% |
| 22240 |
\@namedef{#2}{\pst@object{#2}}% |
| 22241 |
\expandafter\def\csname #2@i\endcsname(##1)(##2){% |
| 22242 |
\@ifnextchar\bgroup% |
| 22243 |
{\@nameuse{#2@ii}(##1)(##2)}% |
| 22244 |
{\@nameuse{#2@ii}(##1)(##2){}}% |
| 22245 |
}% |
| 22246 |
\expandafter\def\csname #2@ii\endcsname(##1)(##2)##3{% |
| 22247 |
\addbefore@par{#3}% |
| 22248 |
\addafter@par{#1}% |
| 22249 |
\begin@OptexpObj |
| 22250 |
\ifPOE@backlayer |
| 22251 |
\POE@regNodes{##1}{##2} |
| 22252 |
\fi |
| 22253 |
\POE@drawcomponent{#2}{##3} |
| 22254 |
\ifPOE@backlayer |
| 22255 |
\POE@Verb{ (1) (N) (\oenode{}{}) CorrectDipoleIfc }% |
| 22256 |
\POE@PresetWireConn |
| 22257 |
\fi |
| 22258 |
\end@OptexpDipole |
| 22259 |
}% |
| 22260 |
\@ifundefined{#2@nodes}{\expandafter\def\csname #2@nodes\endcsname{\POE@elecdipole@nodes}}{}% |
| 22261 |
}{% |
| 22262 |
\PackageError{pst-optexp}{% |
| 22263 |
elecdipole component '#2' already defined}% |
| 22264 |
}% |
| 22265 |
\ignorespaces}% |
| 22266 |
% \end{macrocode} |
| 22267 |
% \end{macro} |
| 22268 |
% \begin{macro}{\elecsynthesizer@ref} |
| 22269 |
% \begin{macrocode} |
| 22270 |
\newOptexpElecDipole{elecsynthesizer}{position=start, innercompalign=absolute} |
| 22271 |
\def\elecsynthesizer@ref{% |
| 22272 |
\POE@setref{% |
| 22273 |
\POE@key@synthwidth\space 0.5 mul |
| 22274 |
\POE@key@synthheight\space 0.5 mul |
| 22275 |
2 copy min /@@sz ED |
| 22276 |
\ifx\POE@key@synthshape\POE@str@circle |
| 22277 |
pop pop @@sz dup |
| 22278 |
\fi |
| 22279 |
/@@y ED /@@x ED |
| 22280 |
}% |
| 22281 |
}% |
| 22282 |
% \end{macrocode} |
| 22283 |
% \end{macro} |
| 22284 |
% |
| 22285 |
% \begin{macro}{\elecsynthesizer@comp} |
| 22286 |
% \begin{macrocode} |
| 22287 |
\def\elecsynthesizer@comp{% |
| 22288 |
\ifx\POE@key@synthshape\POE@str@circle |
| 22289 |
\pscircle(!\POE@dict{@@x0 @@y0}){!\POE@dict{@@x}} |
| 22290 |
\else |
| 22291 |
\POE@comp@rectangle |
| 22292 |
\fi |
| 22293 |
\psrotate(\oenodeCenter{}){!\POE@dict{@@ang}}{% |
| 22294 |
\psset{style=SynthStyle}% |
| 22295 |
\begingroup |
| 22296 |
% \end{macrocode} |
| 22297 |
% Negative units are not possible with parametric or function plots. |
| 22298 |
% \begin{macrocode} |
| 22299 |
\let\POE@tempA\@empty |
| 22300 |
\let\POE@tempB\@empty |
| 22301 |
\ifdim\psxunit<0pt |
| 22302 |
\psset{xunit=-\psxunit} |
| 22303 |
\def\POE@tempA{-1 mul\space}% |
| 22304 |
\fi |
| 22305 |
\ifdim\psyunit<0pt |
| 22306 |
\psset{yunit=-\psyunit} |
| 22307 |
\def\POE@tempB{-1 mul\space}% |
| 22308 |
\fi |
| 22309 |
\ifx\POE@key@synthtype\POE@str@sine |
| 22310 |
\parametricplot[plotpoints=100]{-1}{1}{% |
| 22311 |
\POE@dict{@@sz 0.7 mul t mul t 180 mul \POE@tempA sin @@y -0.35 mul mul \POE@tempB }}% |
| 22312 |
\else\ifx\POE@key@synthtype\POE@str@pulse |
| 22313 |
\psplot[plotpoints=100]{-0.25}{0.25}{2.7182818 x 0.04 div dup mul neg exp 0.3 mul 0.13 sub \POE@tempB}% |
| 22314 |
\fi\fi |
| 22315 |
\endgroup |
| 22316 |
\ifx\POE@key@synthtype\POE@str@rectangle |
| 22317 |
\psline(!\POE@dict{@@sz -0.7 mul @@sz -0.35 mul})% |
| 22318 |
(!\POE@dict{@@sz 0.7 mul -1 1 \POE@key@synthrectwidth\space sub 2 mul add mul @@sz -0.35 mul})% |
| 22319 |
(!\POE@dict{@@sz 0.7 mul -1 1 \POE@key@synthrectwidth\space sub 2 mul add mul @@sz 0.35 mul})% |
| 22320 |
(!\POE@dict{@@sz 0.7 mul @@sz 0.35 mul})% |
| 22321 |
(!\POE@dict{@@sz 0.7 mul @@sz -0.35 mul}) |
| 22322 |
\else\ifx\POE@key@synthtype\POE@str@sawtooth |
| 22323 |
\psline(!\POE@dict{@@sz -0.6 mul @@sz -0.4 mul})% |
| 22324 |
(!\POE@dict{@@sz 0.6 mul @@sz 0.4 mul})% |
| 22325 |
(!\POE@dict{@@sz 0.6 mul @@sz -0.4 mul}) |
| 22326 |
\else\ifx\POE@key@synthtype\POE@str@triangle |
| 22327 |
\psline(!\POE@dict{@@sz -0.6 mul @@sz -0.4 mul})% |
| 22328 |
(!\POE@dict{0 @@sz 0.4 mul})% |
| 22329 |
(!\POE@dict{@@sz 0.6 mul @@sz -0.4 mul}) |
| 22330 |
\else |
| 22331 |
\@ifundefined{elecsynthesizer@custom}{}{\elecsynthesizer@custom}% |
| 22332 |
\fi\fi\fi}% |
| 22333 |
}% |
| 22334 |
% \end{macrocode} |
| 22335 |
% \end{macro} |
| 22336 |
%</stylefile> |
| 22337 |
% |
| 22338 |
% \chapter{The Postscript header file} |
| 22339 |
% \makeatletter |
| 22340 |
%^^A Copied this definition from doc.sty and changed it not to add a |
| 22341 |
%^^A backslash to the Postscript procedure name in the index. |
| 22342 |
% \def\SpecialIndex@#1#2{% |
| 22343 |
% \@SpecialIndexHelper@#1\@nil |
| 22344 |
% \def\@tempb{ }% |
| 22345 |
% \ifcat \@tempb\@gtempa |
| 22346 |
% \special@index{\quotechar\space\actualchar |
| 22347 |
% \string\verb\quotechar*\verbatimchar |
| 22348 |
% \quotechar\space\verbatimchar#2}% |
| 22349 |
% \else |
| 22350 |
% \def\@tempb##1##2\relax{\ifx\relax##2\relax |
| 22351 |
% \def\@tempc{\special@index{\quotechar##1\actualchar |
| 22352 |
% \string\verb\quotechar*\verbatimchar |
| 22353 |
% \quotechar##1\verbatimchar#2}}% |
| 22354 |
% \else |
| 22355 |
% \def\@tempc{\special@index{##1##2\actualchar |
| 22356 |
% \string\verb\quotechar*\verbatimchar##1##2\verbatimchar#2}}% |
| 22357 |
% \fi}% |
| 22358 |
% \expandafter\@tempb\@gtempa\relax |
| 22359 |
% \@tempc |
| 22360 |
% \fi} |
| 22361 |
% \makeatother |
| 22362 |
% |
| 22363 |
%<*prolog> |
| 22364 |
% |
| 22365 |
% This is the dictionary where all components are stored in. |
| 22366 |
% \begin{macrocode} |
| 22367 |
/tx@OptexpDict 200 dict def |
| 22368 |
tx@OptexpDict begin |
| 22369 |
/DebugOE false def |
| 22370 |
/DebugDepth 0 def |
| 22371 |
/DebugBegin { |
| 22372 |
DebugOE { |
| 22373 |
/DebugProcName ED |
| 22374 |
DebugDepth 2 mul string |
| 22375 |
0 1 DebugDepth 2 mul 1 sub { |
| 22376 |
dup 2 mod 0 eq { (|) }{( )} ifelse |
| 22377 |
3 -1 roll dup 4 2 roll |
| 22378 |
putinterval |
| 22379 |
} for |
| 22380 |
DebugProcName strcat == |
| 22381 |
/DebugDepth DebugDepth 1 add def |
| 22382 |
}{ |
| 22383 |
pop |
| 22384 |
} ifelse |
| 22385 |
} bind def |
| 22386 |
/DebugEnd { |
| 22387 |
DebugOE { |
| 22388 |
/DebugDepth DebugDepth 1 sub def |
| 22389 |
DebugDepth 2 mul 2 add string |
| 22390 |
0 1 DebugDepth 2 mul 1 sub { |
| 22391 |
dup 2 mod 0 eq { (|) }{ ( ) } ifelse |
| 22392 |
3 -1 roll dup 4 2 roll |
| 22393 |
putinterval |
| 22394 |
} for |
| 22395 |
dup DebugDepth 2 mul (+-) putinterval |
| 22396 |
( done) strcat == |
| 22397 |
} if |
| 22398 |
} bind def |
| 22399 |
/DebugMsg { |
| 22400 |
DebugOE { |
| 22401 |
DebugDepth 1 add 2 mul string |
| 22402 |
0 1 DebugDepth 2 mul 1 add { |
| 22403 |
dup 2 mod 0 eq { (|) }{( )} ifelse |
| 22404 |
3 -1 roll dup 4 2 roll |
| 22405 |
putinterval |
| 22406 |
} for |
| 22407 |
exch strcat == |
| 22408 |
}{ |
| 22409 |
pop |
| 22410 |
} ifelse |
| 22411 |
} bind def |
| 22412 |
% \end{macrocode} |
| 22413 |
% \begin{macro}{strcat} |
| 22414 |
% Concatenate two strings and leave the result on the stack |
| 22415 |
% \begin{pssyntax} |
| 22416 |
% \PSstring{str1} \PSstring{str2} \PSop{strcat} \PSstring{str1str2} |
| 22417 |
% \end{pssyntax} |
| 22418 |
% \begin{macrocode} |
| 22419 |
/strcat { |
| 22420 |
exch 2 copy |
| 22421 |
length exch length add |
| 22422 |
string dup dup 5 2 roll |
| 22423 |
copy length exch |
| 22424 |
putinterval |
| 22425 |
} bind def |
| 22426 |
% \end{macrocode} |
| 22427 |
% \end{macro} |
| 22428 |
% |
| 22429 |
% \begin{macro}{nametostr} |
| 22430 |
% Convert a literal name to string. This is required, because some PSTricks |
| 22431 |
% parameter like \opt{angleA} do not allow round braces in the argument, so |
| 22432 |
% some string must be passed as name and then converted to a string. |
| 22433 |
% \begin{pssyntax} |
| 22434 |
% \PSname{name} \PSop{nametostr} \PSstring{name} |
| 22435 |
% \end{pssyntax} |
| 22436 |
% \begin{macrocode} |
| 22437 |
/nametostr { |
| 22438 |
dup length string cvs |
| 22439 |
} bind def |
| 22440 |
% \end{macrocode} |
| 22441 |
% \end{macro} |
| 22442 |
% |
| 22443 |
% \begin{macro}{PrintWarning} |
| 22444 |
% Print a warning about the raytracing. This is enabled or disabled via option |
| 22445 |
% \opt{pswarning}. |
| 22446 |
% \begin{macrocode} |
| 22447 |
/PrintWarning { |
| 22448 |
(Warning pst-optexp: ) exch strcat (\n) strcat print |
| 22449 |
} bind def |
| 22450 |
/CompUnknownWarning { |
| 22451 |
(Component ') exch strcat (' unknown) strcat Warning |
| 22452 |
} bind def |
| 22453 |
/OneFiberCompWarning { |
| 22454 |
(Found only one unsupported component in beam path, drawing no beam) Warning |
| 22455 |
} bind def |
| 22456 |
/FiberCompWarning { |
| 22457 |
(Found an unsupported component in beam path, stopping beam path) Warning |
| 22458 |
} bind def |
| 22459 |
% \end{macrocode} |
| 22460 |
% \end{macro} |
| 22461 |
% |
| 22462 |
% \begin{macro}{inttostr} |
| 22463 |
% Convert an integer to a string. |
| 22464 |
% \begin{pssyntax} |
| 22465 |
% \PSvar{int} \PSop{inttostr} \PSstring{int} |
| 22466 |
% \end{pssyntax} |
| 22467 |
% \begin{macrocode} |
| 22468 |
/inttostr { |
| 22469 |
dup type /integertype eq { |
| 22470 |
dup log 1 add floor cvi string cvs |
| 22471 |
} if |
| 22472 |
} bind def |
| 22473 |
% \end{macrocode} |
| 22474 |
% \end{macro} |
| 22475 |
% |
| 22476 |
% \begin{macro}{calcNodes} |
| 22477 |
% Calculate the reference node coordinates for reflective components and |
| 22478 |
% stores them as \PSvar{X@A}, \PSvar{Y@A}, \PSvar{X@B} and \PSvar{Y@B}. |
| 22479 |
% \begin{pssyntax} |
| 22480 |
% \PSvar{XA} \PSvar{YA} \PSvar{XB} \PSvar{YB} \PSvar{XG} \PSvar{YG} \PSop{calcNodes} |
| 22481 |
% \end{pssyntax} |
| 22482 |
% \begin{macrocode} |
| 22483 |
/calcNodes { |
| 22484 |
(calcNode) DebugBegin |
| 22485 |
/YG exch def /XG exch def |
| 22486 |
/by exch YG sub def |
| 22487 |
/bx exch XG sub def |
| 22488 |
/ay YG 3 -1 roll sub def |
| 22489 |
/ax XG 3 -1 roll sub def |
| 22490 |
ax ay NormalizeVec bx by NormalizeVec VecAdd |
| 22491 |
2 copy Pyth abs 1e-4 lt { |
| 22492 |
pop pop ax ay -90 matrix rotate dtransform |
| 22493 |
} if |
| 22494 |
/cy ED /cx ED |
| 22495 |
/c ax bx add ay by add Pyth def |
| 22496 |
% \end{macrocode} |
| 22497 |
% If $c=0$, then set the coordinates of the vector manually depending whether |
| 22498 |
% \PSvar{a} and \PSvar{b} are parallel or antiparallel. |
| 22499 |
% \begin{macrocode} |
| 22500 |
c 0 eq { |
| 22501 |
ax ay bx by DotProd 0 gt { |
| 22502 |
% \end{macrocode} |
| 22503 |
% $\text{dotprod} > 0$, i.e. \PSvar{a} and \PSvar{b} are parallel. |
| 22504 |
% \begin{macrocode} |
| 22505 |
/cx ax def |
| 22506 |
/cy ay def |
| 22507 |
}{ |
| 22508 |
/cx ay def |
| 22509 |
/cy ax neg def |
| 22510 |
} ifelse |
| 22511 |
} if |
| 22512 |
cx cy NormalizeVec 2 copy |
| 22513 |
XG YG VecAdd /Y@A ED /X@A ED |
| 22514 |
XG YG 4 2 roll VecSub /Y@B ED /X@B ED |
| 22515 |
% \end{macrocode} |
| 22516 |
% Test the chirality (the order) of the input points. Input angles $> 90$\textdegree |
| 22517 |
% don't make sense, in this case we exhange the calculated reference nodes. |
| 22518 |
% \begin{macrocode} |
| 22519 |
true |
| 22520 |
ax by mul ay bx mul sub 0 le { |
| 22521 |
pop false |
| 22522 |
Y@A X@A |
| 22523 |
/X@A X@B def |
| 22524 |
/Y@A Y@B def |
| 22525 |
/X@B exch def |
| 22526 |
/Y@B exch def |
| 22527 |
} if |
| 22528 |
DebugEnd |
| 22529 |
} bind def |
| 22530 |
% \end{macrocode} |
| 22531 |
% \end{macro} |
| 22532 |
% |
| 22533 |
% \begin{macro}{capHeight} |
| 22534 |
% Calculate the height \PSvar{a} of a pole cap, used for curved interfaces. |
| 22535 |
% \begin{pssyntax} |
| 22536 |
% \PSvar{R} \PSvar{h} \PSop{capHeight} \PSvar{a} |
| 22537 |
% \end{pssyntax} |
| 22538 |
% \PSvar{R} is the circle radius and \PSvar{h} the width of the pole cap. |
| 22539 |
% \begin{macrocode} |
| 22540 |
/capHeight { |
| 22541 |
dup mul neg exch abs dup 3 1 roll dup mul add sqrt sub |
| 22542 |
} bind def |
| 22543 |
% \end{macrocode} |
| 22544 |
% \end{macro} |
| 22545 |
% |
| 22546 |
% \begin{macro}{leftCurvedIfc} |
| 22547 |
% Calculate some parameters for the «left» interface of a lens. Defines and |
| 22548 |
% \PSname{ArcL} which is used later in the code to actually draw the interface |
| 22549 |
% curve. |
| 22550 |
% \begin{pssyntax} |
| 22551 |
% \PSvar{h R1} \PSop{leftCurvedIfc} \PSvar{y |R1| alpha\textunderscore b |
| 22552 |
% alpha\textunderscore t R1} |
| 22553 |
% \end{pssyntax} |
| 22554 |
% \begin{macrocode} |
| 22555 |
/leftCurvedIfc { |
| 22556 |
/R1 exch def /h exch def |
| 22557 |
0 R1 abs dup R1 h capHeight exch sub R1 sign mul dup |
| 22558 |
h exch atan exch |
| 22559 |
h neg exch atan |
| 22560 |
R1 0 lt { |
| 22561 |
/ArcL /arcn load def |
| 22562 |
} { |
| 22563 |
/ArcL /arc load def |
| 22564 |
} ifelse |
| 22565 |
R1 |
| 22566 |
} bind def |
| 22567 |
% \end{macrocode} |
| 22568 |
% \end{macro} |
| 22569 |
% |
| 22570 |
% \begin{macro}{rightCurvedIfc} |
| 22571 |
% Analogous to \PSname{leftCurvedIfc} for «right» interfaces, defines |
| 22572 |
% \PSname{ArcR} for later use. |
| 22573 |
% \begin{pssyntax} |
| 22574 |
% \PSvar{h R2} \PSop{rightCurvedIfc} \PSvar{y |R2| alpha\textunderscore b |
| 22575 |
% alpha\textunderscore t R2} |
| 22576 |
% \end{pssyntax} |
| 22577 |
% \begin{macrocode} |
| 22578 |
/rightCurvedIfc { |
| 22579 |
/R2 exch def /h exch def |
| 22580 |
0 R2 abs dup R2 h capHeight sub R2 sign mul dup |
| 22581 |
h neg exch atan exch |
| 22582 |
h exch atan |
| 22583 |
R2 0 lt { |
| 22584 |
/ArcR /arcn load def |
| 22585 |
} { |
| 22586 |
/ArcR /arc load def |
| 22587 |
} ifelse |
| 22588 |
R2 |
| 22589 |
} bind def |
| 22590 |
% \end{macrocode} |
| 22591 |
% \end{macro} |
| 22592 |
% |
| 22593 |
% \begin{macro}{SlopeAngle} |
| 22594 |
% Calculate slope angle of a line from \PSname{nodeA} to \PSname{nodeB}. |
| 22595 |
% \begin{pssyntax} |
| 22596 |
% \PSname{nodeB} \PSname{nodeA} \PSop{SlopeAngle} \PSvar{angle} |
| 22597 |
% \end{pssyntax} |
| 22598 |
% \begin{macrocode} |
| 22599 |
/SlopeAngle { |
| 22600 |
(SlopeAngle) DebugBegin |
| 22601 |
@GetCenter 3 -1 roll @GetCenter @ABVect exch atan |
| 22602 |
DebugEnd |
| 22603 |
} bind def |
| 22604 |
% \end{macrocode} |
| 22605 |
% \end{macro} |
| 22606 |
% |
| 22607 |
% \begin{macro}{DefineExtNode} |
| 22608 |
% Constructs the coordinates of an external node based on values that have |
| 22609 |
% been set beforehand. \PSvar{xref} and \PSvar{yref} are the values which are |
| 22610 |
% defined by \opt{extnode} parameter. \PSvar{RefFac} is defined by parameter |
| 22611 |
% \opt{extnodealign}, which determines it the reference of the external node |
| 22612 |
% position should be the global coordinate system, or the line between the |
| 22613 |
% reference nodes. |
| 22614 |
% \begin{pssyntax} |
| 22615 |
% \PSvar{xref yref} \PSop{DefineExtNode} \PSvar{X Y} |
| 22616 |
% \end{pssyntax} |
| 22617 |
% \begin{macrocode} |
| 22618 |
/DefineExtNode {% |
| 22619 |
(DefineExtNode) DebugBegin |
| 22620 |
@@y mul RefFac mul @@y0 add |
| 22621 |
exch @@x mul RefFac mul @@x0 add exch |
| 22622 |
DebugEnd |
| 22623 |
} bind def |
| 22624 |
% \end{macrocode} |
| 22625 |
% \end{macro} |
| 22626 |
% |
| 22627 |
% \begin{macro}{GetInternalNodeNames} |
| 22628 |
% Push all internal node names of \PSstring{basicname} on the |
| 22629 |
% stack. If \PSvar{reverse} is \PSvar{true}, the names are pushed in |
| 22630 |
% reverse order. |
| 22631 |
% \begin{pssyntax} |
| 22632 |
% \PSstring{basicname} \PSvar{reverse} \PSop{GetInternalNodeNames} |
| 22633 |
% \PSname{N@basicnameN} \ldots{} \PSname{N@basicname1} (if |
| 22634 |
% \PSvar{reverse = false}) |
| 22635 |
% \end{pssyntax} |
| 22636 |
% \begin{macrocode} |
| 22637 |
/GetInternalNodeNames { |
| 22638 |
(GetInternalNodeNames) DebugBegin |
| 22639 |
/reverse ED |
| 22640 |
dup cvn load /N get dup |
| 22641 |
reverse { -1 1 } { 1 1 3 -1 roll } ifelse |
| 22642 |
{ inttostr |
| 22643 |
3 -1 roll dup 4 1 roll exch NodeName 3 1 roll |
| 22644 |
} for |
| 22645 |
pop pop |
| 22646 |
DebugEnd |
| 22647 |
} bind def |
| 22648 |
% \end{macrocode} |
| 22649 |
% \end{macro} |
| 22650 |
% |
| 22651 |
% \begin{macro}{GetInternalBeamNodes} |
| 22652 |
% This is like \PSvar{GetInternalNodeNames}, but leaves the node |
| 22653 |
% coordinates on the stack |
| 22654 |
% \begin{pssyntax} |
| 22655 |
% \PSstring{basicnodename} \PSvar{reverse} \PSop{GetInternalBeamNodes} |
| 22656 |
% \PSvar{XN YN \ldots\ X1 Y1} (if \PSvar{reverse = false}) |
| 22657 |
% \end{pssyntax} |
| 22658 |
% \begin{macrocode} |
| 22659 |
/GetInternalBeamNodes { |
| 22660 |
(GetInternalBeamNodes) DebugBegin |
| 22661 |
[ 3 1 roll GetInternalNodeNames ] |
| 22662 |
{ @GetCenter } forall |
| 22663 |
DebugEnd |
| 22664 |
} bind def |
| 22665 |
% \end{macrocode} |
| 22666 |
% \end{macro} |
| 22667 |
% |
| 22668 |
% \begin{macro}{InitOptexpComp} |
| 22669 |
% Initialize some global variables for positioning of external |
| 22670 |
% nodes. This is called at the beginning of every component. |
| 22671 |
% \begin{macrocode} |
| 22672 |
/InitOptexpComp {% |
| 22673 |
/@@x 0 def |
| 22674 |
/@@y 0 def |
| 22675 |
/@@x0 0 def |
| 22676 |
/@@y0 0 def |
| 22677 |
/@xref [0] def |
| 22678 |
/@yref [0] def |
| 22679 |
/RefFac 1 def |
| 22680 |
} bind def |
| 22681 |
% \end{macrocode} |
| 22682 |
% \end{macro} |
| 22683 |
% |
| 22684 |
% \begin{macro}{NewTempNodeComp} |
| 22685 |
% If \cs{draw*beam} is invoked with a node as parameter, a |
| 22686 |
% temporary \cs{optplane} is defined. The plane vector of this temporary plane |
| 22687 |
% is set such that it is perpendicular to the connection between the node and the following |
| 22688 |
% interface node. |
| 22689 |
% |
| 22690 |
% This is the only procedure which sets the \PSname{adjustRel} flag |
| 22691 |
% which indicates adjustment of the plane vector rotation depending on |
| 22692 |
% the incoming or outgoing connection direction. |
| 22693 |
% |
| 22694 |
% For an explanation of all other dictionary members, please see |
| 22695 |
% \PSvar{NewOptexpComp}. |
| 22696 |
% \begin{pssyntax} |
| 22697 |
% \PSproc{x y} \PSproc{dx dy} \PSstring{name} \PSproc{scaling} |
| 22698 |
% \PSop{NewTempNodeComp} |
| 22699 |
% \end{pssyntax} |
| 22700 |
% \begin{macrocode} |
| 22701 |
/NewTempNodeComp { |
| 22702 |
(NewTempNodeComp) DebugBegin |
| 22703 |
/sc ED |
| 22704 |
dup cvn |
| 22705 |
6 dict dup 3 1 roll def begin |
| 22706 |
/ambiguous false def |
| 22707 |
/allowbeaminside false def |
| 22708 |
/forcebeaminside false def |
| 22709 |
/name ED |
| 22710 |
/correct false def |
| 22711 |
% \end{macrocode} |
| 22712 |
% This definition does not work like for \PSvar{NewOptexpComp}, because |
| 22713 |
% a current point may not be available. Therefore, we translate to the |
| 22714 |
% $(X, Y)$ node and define $X = Y = 0$. |
| 22715 |
% \begin{macrocode} |
| 22716 |
{0 0} exch 3 -1 roll exec |
| 22717 |
gsave |
| 22718 |
translate |
| 22719 |
/CompMtrx CM def |
| 22720 |
grestore |
| 22721 |
/N 1 def |
| 22722 |
/n bgRefIndex def |
| 22723 |
5 dict dup dup /P@1 ED /P@N ED |
| 22724 |
begin |
| 22725 |
/mode trans def |
| 22726 |
{} 0 0 PlainIfc |
| 22727 |
end |
| 22728 |
/adjustRel true def |
| 22729 |
end |
| 22730 |
DebugEnd |
| 22731 |
} bind def |
| 22732 |
% \end{macrocode} |
| 22733 |
% \end{macro} |
| 22734 |
% |
| 22735 |
% \begin{macro}{CurvedIfc} |
| 22736 |
% Defines a curved interface. |
| 22737 |
% \begin{pssyntax} |
| 22738 |
% \PSproc{X Y} \PSproc{DX DY} \PSproc{scl} \PSvar{NAlow NAup} \PSop{CurvedIfc} |
| 22739 |
% \end{pssyntax} |
| 22740 |
% \begin{macrocode} |
| 22741 |
/CurvedIfc { |
| 22742 |
5 2 roll |
| 22743 |
2 copy 5 3 roll exec 3 -1 roll exec VecAdd |
| 22744 |
5 -1 roll exec /Y ED /X ED |
| 22745 |
exch exec 3 -1 roll 3 copy exec /RY ED /RX ED |
| 22746 |
3 1 roll NormalizeVec 3 -1 roll exec |
| 22747 |
tx@Dict begin Pyth end dup |
| 22748 |
3 1 roll mul 1.00001 mul /NAup ED |
| 22749 |
mul 1.00001 mul /NAlow ED |
| 22750 |
} bind def |
| 22751 |
% \end{macrocode} |
| 22752 |
% \end{macro} |
| 22753 |
% |
| 22754 |
% \begin{macro}{PlainIfc} |
| 22755 |
% \begin{pssyntax} |
| 22756 |
% \PSproc{X Y} \PSproc{DX DY} \PSproc{scl} \PSvar{NAlow NAup} \PSop{PlainIfc} |
| 22757 |
% \end{pssyntax} |
| 22758 |
% \begin{macrocode} |
| 22759 |
/PlainIfc { |
| 22760 |
5 2 roll |
| 22761 |
dup 3 -1 roll exec NormalizeVec 3 -1 roll exec 2 copy /DY ED /DX ED |
| 22762 |
tx@Dict begin Pyth end dup 4 2 roll |
| 22763 |
exch exec 3 -1 roll exec /Y ED /X ED |
| 22764 |
3 1 roll mul 1.00001 mul /NAup ED |
| 22765 |
mul 1.00001 mul /NAlow ED |
| 22766 |
} bind def |
| 22767 |
% \end{macrocode} |
| 22768 |
% \end{macro} |
| 22769 |
% |
| 22770 |
% \begin{macro}{PathIfc} |
| 22771 |
% Define an interface which is given by an arbitrary path. |
| 22772 |
% \begin{pssyntax} |
| 22773 |
% \PSproc{X Y} \PSarray{path} \PSproc{scl} \PSvar{NAlow NAup} \PSop{PathIfc} |
| 22774 |
% \end{pssyntax} |
| 22775 |
% \begin{macrocode} |
| 22776 |
/PathIfc { |
| 22777 |
pop pop /NAup 0 def /NAlow 0 def |
| 22778 |
% \end{macrocode} |
| 22779 |
% This kind of interface doesn't allow to switch off the NA-settings, |
| 22780 |
% because the interface is defined only inside the NA. |
| 22781 |
% \begin{macrocode} |
| 22782 |
3 1 roll /Path ED |
| 22783 |
exec 3 -1 roll exec /Y ED /X ED |
| 22784 |
} bind def |
| 22785 |
% \end{macrocode} |
| 22786 |
% \end{macro} |
| 22787 |
% \begin{macro}{NewCompIfc} |
| 22788 |
% Defines a new interface of a component, must be called within \PSvar{NewOptexpComp}. |
| 22789 |
% \begin{pssyntax} |
| 22790 |
% \PSproc{x y} \PSproc{dx dy|rx ry} \PSvar{NAlow NAup mode} |
| 22791 |
% \PSstring{CompName} \PSstring{Name} \PSproc{New\ldots Ifc} \PSproc{scaling} |
| 22792 |
% \PSop{NewCompIfc} |
| 22793 |
% \end{pssyntax} |
| 22794 |
% \begin{psarglist} |
| 22795 |
% \psargitem{\PSproc{x y}} The coordinates of the interface node which lies on the optical axis.?? |
| 22796 |
% \psargitem{\PSproc{dx dy | rx ry}} For a plane interface, this is the vector that describes the plane, for a curved interface this is the |
| 22797 |
% \psargitem{\PSvar{NAlow NAup}} |
| 22798 |
% \psargitem{\PSvar{mode}} An integer which characterizes if an interface is |
| 22799 |
% reflective or transmittive. You should use the predefined variable |
| 22800 |
% \PSname{refl} and \PSname{trans} for this. |
| 22801 |
% \psargitem{\PSstring{CompName}} The name of the component we are in. |
| 22802 |
% \psargitem{\PSstring{Name}} The name of the new interface. It is prefixed by «P@». |
| 22803 |
% \psargitem{\PSproc{\ldots Ifc}} Contain the actual procedure to define the |
| 22804 |
% concrete interface type, can be \PSproc{PlainIfc}, \PSproc{CurvedIfc} or \PSproc{PathIfc}. |
| 22805 |
% \end{psarglist} |
| 22806 |
% \begin{macrocode} |
| 22807 |
/NewCompIfc { |
| 22808 |
/scl ED |
| 22809 |
/next ED |
| 22810 |
dup (P@) exch strcat cvn |
| 22811 |
6 dict dup |
| 22812 |
3 1 roll def |
| 22813 |
begin |
| 22814 |
3 -1 roll |
| 22815 |
/mode ED |
| 22816 |
6 -1 roll dup 7 -1 roll |
| 22817 |
{scl} 8 -2 roll next |
| 22818 |
end |
| 22819 |
% \end{macrocode} |
| 22820 |
% store a new node \PSname{N@NameX}, with X=1..N this node always |
| 22821 |
% represents the intersection of an untilted and unshifted incoming beam |
| 22822 |
% on the optical axis with the respective interface |
| 22823 |
% \begin{macrocode} |
| 22824 |
exec scl ToVec 3 1 roll NodeName @NewNode |
| 22825 |
} bind def |
| 22826 |
% \end{macrocode} |
| 22827 |
% \end{macro} |
| 22828 |
% |
| 22829 |
% Define some constants. |
| 22830 |
% |
| 22831 |
% These are used for checks of the \opt{beamalign} and \opt{fiberalign} parameters. |
| 22832 |
% \begin{macrocode} |
| 22833 |
/relative 0 def /absolute 1 def /center 2 def /firstcomp 3 def |
| 22834 |
% \end{macrocode} |
| 22835 |
% |
| 22836 |
% These constants are used to describe the characteristics of interfaces. |
| 22837 |
% \begin{macrocode} |
| 22838 |
/refl 0 def /trans 1 def /absorb 2 def /refltrans 3 def /auto 4 def /undefined -1 def |
| 22839 |
% \end{macrocode} |
| 22840 |
% |
| 22841 |
% These give the ordering of the internal interfaces of a component. |
| 22842 |
% \begin{macrocode} |
| 22843 |
/desc 0 def /asc 1 def /amb 2 def |
| 22844 |
% \end{macrocode} |
| 22845 |
% |
| 22846 |
% The possible status after computing the outgoing vector at an interface. |
| 22847 |
% \begin{macrocode} |
| 22848 |
/ok 0 def /tir 1 def /missed 2 def |
| 22849 |
/bgRefIndex 0 def |
| 22850 |
% \end{macrocode} |
| 22851 |
% |
| 22852 |
% \begin{macro}{NewOptexpComp} |
| 22853 |
% \PSvar{NewOptexpComp} creates a new dictionary that contains everything needed |
| 22854 |
% for an optical component. It contains the following variables: |
| 22855 |
% \begin{psarglist} |
| 22856 |
% \psargitem{\PSvar{n}} The basic refractive index which was set for the |
| 22857 |
% component. This may be overwritten with the \opt{n} option of the |
| 22858 |
% \nxLcs{drawbeam} macros. |
| 22859 |
% |
| 22860 |
% \psargitem{\PSvar{CompMtrx}} The transformation matrix at time of |
| 22861 |
% the component definition. The method is the same as for the |
| 22862 |
% \nxLPack{pst-node} nodes. |
| 22863 |
% |
| 22864 |
% \psargitem{\PSvar{name}} The name of the component. This is build of |
| 22865 |
% several components which are put together in the \TeX\ code. |
| 22866 |
% |
| 22867 |
% \psargitem{\PSvar{N}} The number of interfaces of the component. |
| 22868 |
% |
| 22869 |
% \psargitem{\PSvar{P@1\ldots P@N}} The actual |
| 22870 |
% interfaces. \PSvar{P@1} and \PSvar{P@N} are always defined, even if |
| 22871 |
% \PSvar{N = 1}. In that case the two names link to the same |
| 22872 |
% dictionary, so that changes in one of them are automatically present |
| 22873 |
% also in the second one. |
| 22874 |
% |
| 22875 |
% \psargitem{\PSproc{sc}} The scaling procedure for the coordinates to convert |
| 22876 |
% from \TeX{} to Postscript scaling. In should always be defined as |
| 22877 |
% \PSproc{\textbackslash psxunit, \textbackslash psyunit}. |
| 22878 |
% |
| 22879 |
% \psargitem{\PSvar{ambiguous}} There is a class of components, which have a central interface |
| 22880 |
% \PSvar{P@C} which can be either transmittive or reflective, |
| 22881 |
% depending on the previous and following component positions. The |
| 22882 |
% mode of the \PSvar{P@C} is determined at the time of the beam |
| 22883 |
% drawing and requires special attention. |
| 22884 |
% |
| 22885 |
% \psargitem{\PSvar{correct}} If \opt{true}, the input vectors after |
| 22886 |
% the transmittive interfaces are corrected when using |
| 22887 |
% \opt{connectifc}. |
| 22888 |
% \end{psarglist} |
| 22889 |
% |
| 22890 |
% \begin{pssyntax} |
| 22891 |
% \PSvar{[} \PSproc{x y} \PSproc{dx dy | rx ry} \PSvar{NAlow NAup} |
| 22892 |
% \PSvar{type} \PSproc{\ldots Ifc} |
| 22893 |
% \PSvar{\ldots{} [n] correct? amb? allowbeaminside? forcebeaminside?} |
| 22894 |
% \PSstring{CompName} \PSproc{scaling} \PSop{NewOptexpComp} |
| 22895 |
% \end{pssyntax} |
| 22896 |
% \begin{macrocode} |
| 22897 |
/NewOptexpComp { |
| 22898 |
(NewOptexpComp) DebugBegin |
| 22899 |
/sc ED dup cvn |
| 22900 |
gsave |
| 22901 |
13 dict dup 3 1 roll def begin |
| 22902 |
/name ED |
| 22903 |
/forcebeaminside ED |
| 22904 |
/allowbeaminside ED |
| 22905 |
/ambiguous ED |
| 22906 |
/grating false def |
| 22907 |
dup type /booleantype eq not { false } if /correct ED |
| 22908 |
tx@Dict begin |
| 22909 |
STV {CP T} stopped pop |
| 22910 |
end |
| 22911 |
/CompMtrx CM def |
| 22912 |
grestore |
| 22913 |
counttomark dup 6 idiv dup /N ED 6 mul eq { 1 } if |
| 22914 |
cvx 1 EvalRefIndex /n ED |
| 22915 |
% \end{macrocode} |
| 22916 |
% This defines for ambiguous components, which interface coincides with the |
| 22917 |
% ambiguous interface. 0 indicates that there is no ambiguous interface. |
| 22918 |
% \begin{macrocode} |
| 22919 |
ambiguous { |
| 22920 |
/ambIfc ED |
| 22921 |
}{ |
| 22922 |
/ambIfc 0 def |
| 22923 |
} ifelse |
| 22924 |
1 N eq { |
| 22925 |
% \end{macrocode} |
| 22926 |
% only a single plane is specified, create the aliases. |
| 22927 |
% \begin{macrocode} |
| 22928 |
name (1) 3 -1 roll {sc} NewCompIfc |
| 22929 |
(1) (2) IfcCopy |
| 22930 |
(2) (N) IfcAlias |
| 22931 |
}{ |
| 22932 |
N -1 1 { % |
| 22933 |
inttostr exch name 3 1 roll {sc} NewCompIfc |
| 22934 |
} for |
| 22935 |
N inttostr (N) IfcAlias |
| 22936 |
} ifelse |
| 22937 |
ambiguous ambIfc 0 gt and { |
| 22938 |
ambIfc inttostr (C) IfcCopy |
| 22939 |
} if |
| 22940 |
end |
| 22941 |
pop |
| 22942 |
DebugEnd |
| 22943 |
} bind def |
| 22944 |
% \end{macrocode} |
| 22945 |
% \end{macro} |
| 22946 |
% |
| 22947 |
% \begin{macro}{NewOptexpFiberComp} |
| 22948 |
% \begin{pssyntax} |
| 22949 |
% \PSvar{[} \PSvar{x y} \ldots |
| 22950 |
% \PSstring{CompName} \PSproc{scaling} \PSop{NewOptexpFiberComp} |
| 22951 |
% \end{pssyntax} |
| 22952 |
% \begin{macrocode} |
| 22953 |
/NewOptexpFiberComp { |
| 22954 |
(NewOptexpFiberComp) DebugBegin |
| 22955 |
/sc ED dup cvn |
| 22956 |
gsave |
| 22957 |
12 dict dup 3 1 roll def begin |
| 22958 |
/name ED |
| 22959 |
tx@Dict begin |
| 22960 |
STV {CP T} stopped pop |
| 22961 |
end |
| 22962 |
/CompMtrx CM def |
| 22963 |
grestore |
| 22964 |
counttomark /N ED |
| 22965 |
1 N eq { |
| 22966 |
% \end{macrocode} |
| 22967 |
% only a single plane is specified, create the aliases. |
| 22968 |
% \begin{macrocode} |
| 22969 |
{0 1} 0 0 trans name (1) {PlainIfc} {sc} NewCompIfc |
| 22970 |
(1) (2) IfcCopy |
| 22971 |
(2) (N) IfcAlias |
| 22972 |
}{ |
| 22973 |
N -1 1 { |
| 22974 |
inttostr |
| 22975 |
{0 1} 0 0 absorb name 6 -1 roll {PlainIfc} {sc} NewCompIfc |
| 22976 |
} for |
| 22977 |
N inttostr (N) IfcAlias |
| 22978 |
} ifelse |
| 22979 |
end |
| 22980 |
pop |
| 22981 |
DebugEnd |
| 22982 |
} bind def |
| 22983 |
% \end{macrocode} |
| 22984 |
% \end{macro} |
| 22985 |
% |
| 22986 |
% \begin{macro}{IfcCopy} |
| 22987 |
% Copy an interface \PSvar{from} to an interface \PSvar{to}, must be called |
| 22988 |
% within the respective component dictionary. This involves also copying the |
| 22989 |
% node associated with the interface. |
| 22990 |
% \begin{pssyntax} |
| 22991 |
% \PSvar{from} \PSvar{to} \PSop{CopyIfc} |
| 22992 |
% \end{pssyntax} |
| 22993 |
% \begin{macrocode} |
| 22994 |
/IfcCopy { |
| 22995 |
2 copy IfcName exch IfcName load dup |
| 22996 |
length dict copy def |
| 22997 |
name exch NodeName name 3 -1 roll NodeName |
| 22998 |
tx@NodeDict begin |
| 22999 |
load dup length dict copy def |
| 23000 |
end |
| 23001 |
} bind def |
| 23002 |
% \end{macrocode} |
| 23003 |
% \end{macro} |
| 23004 |
% |
| 23005 |
% \begin{macro}{IfcAlias} |
| 23006 |
% Create an alias of an interface. This involves creating also an |
| 23007 |
% alias for the associated node. Must be called withing |
| 23008 |
% \PSvar{NewOptexpComp}. |
| 23009 |
% |
| 23010 |
% \begin{pssyntax} |
| 23011 |
% \PSstring{OrigPN} \PSstring{AliasPN} \PSop{IfcAlias} |
| 23012 |
% \end{pssyntax} |
| 23013 |
% \begin{macrocode} |
| 23014 |
/IfcAlias { |
| 23015 |
2 copy IfcName exch IfcName load def |
| 23016 |
tx@NodeDict begin |
| 23017 |
name exch NodeName name 3 -1 roll NodeName load def |
| 23018 |
end |
| 23019 |
} bind def |
| 23020 |
% \end{macrocode} |
| 23021 |
% \end{macro} |
| 23022 |
% |
| 23023 |
% \begin{macro}{CompAlias} |
| 23024 |
% Components which have a \opt{compname} assigned, must also be |
| 23025 |
% available by their component number. Here, all necessary |
| 23026 |
% informations (nodes, component dictionary) are referenced such that |
| 23027 |
% any information is accessible via number or name. |
| 23028 |
% \begin{pssyntax} |
| 23029 |
% \PSstring{NameStem} \PSstring{IDStem} \PSop{CompAlias} |
| 23030 |
% \end{pssyntax} |
| 23031 |
% \begin{macrocode} |
| 23032 |
/CompAlias { |
| 23033 |
% \end{macrocode} |
| 23034 |
% Copy the component dictionary |
| 23035 |
% \begin{macrocode} |
| 23036 |
2 copy cvn dup currentdict exch known { |
| 23037 |
load def |
| 23038 |
} { |
| 23039 |
pop |
| 23040 |
} ifelse |
| 23041 |
tx@NodeDict begin |
| 23042 |
% \end{macrocode} |
| 23043 |
% Copy all interface nodes of the component. |
| 23044 |
% \begin{macrocode} |
| 23045 |
1 { |
| 23046 |
3 copy inttostr dup |
| 23047 |
3 1 roll 2 copy NodeName |
| 23048 |
currentdict exch known { |
| 23049 |
NodeName load 3 1 roll NodeName ED |
| 23050 |
1 add |
| 23051 |
} { |
| 23052 |
pop (N) NodeName load 3 1 roll |
| 23053 |
pop (N) NodeName ED |
| 23054 |
pop exit |
| 23055 |
} ifelse |
| 23056 |
} loop |
| 23057 |
% \end{macrocode} |
| 23058 |
% Copy all other nodes associated with the component (reference nodes, center |
| 23059 |
% node, label node etc). |
| 23060 |
% \begin{macrocode} |
| 23061 |
mark (A) (B) (@A) (@B) (Center) (Label) (Rotref) |
| 23062 |
(TrefA) (TrefB) (@TrefA) (@TrefB) (Ext) (Origin) |
| 23063 |
counttomark { |
| 23064 |
counttomark 3 add -2 roll 2 copy counttomark 1 add 2 roll |
| 23065 |
3 -1 roll dup 4 1 roll NodeName dup |
| 23066 |
currentdict exch known { |
| 23067 |
load 3 1 roll exch NodeName ED |
| 23068 |
} { |
| 23069 |
pop pop pop |
| 23070 |
} ifelse |
| 23071 |
} repeat pop |
| 23072 |
% \end{macrocode} |
| 23073 |
% Copy additional external nodes, the maximum is 8 (all combinations of |
| 23074 |
% l, r, t, b, c). Old and new node name stems are still on the stack. |
| 23075 |
% \begin{macrocode} |
| 23076 |
exch 1 1 8 { |
| 23077 |
3 copy |
| 23078 |
(Ext) exch 5 string cvs strcat dup 3 1 roll |
| 23079 |
NodeName 3 1 roll NodeName |
| 23080 |
dup currentdict exch known { |
| 23081 |
load def pop |
| 23082 |
} { |
| 23083 |
pop pop pop exit |
| 23084 |
} ifelse |
| 23085 |
} for |
| 23086 |
pop pop |
| 23087 |
end |
| 23088 |
} bind def |
| 23089 |
% \end{macrocode} |
| 23090 |
% \end{macro} |
| 23091 |
% |
| 23092 |
% \begin{macro}{GetPlaneVec} |
| 23093 |
% Push the coordinates of the plane vector on the stack, for curved interfaces |
| 23094 |
% this is the tangent at the interface node. |
| 23095 |
% \begin{pssyntax} |
| 23096 |
% \PSvar{IfcNum} \PSstring{CompName} \PSop{GetPlaneVec} \PSvar{dX dY} |
| 23097 |
% \end{pssyntax} |
| 23098 |
% \begin{macrocode} |
| 23099 |
/GetPlaneVec { |
| 23100 |
(GetPlaneVec) DebugBegin |
| 23101 |
cvn load begin |
| 23102 |
IfcName load begin |
| 23103 |
currentdict /RX known { |
| 23104 |
RX RY CompMtrx dtransform CM idtransform |
| 23105 |
neg exch |
| 23106 |
} { |
| 23107 |
DX DY CompMtrx dtransform CM idtransform |
| 23108 |
} ifelse |
| 23109 |
end |
| 23110 |
end |
| 23111 |
DebugEnd |
| 23112 |
} bind def |
| 23113 |
% \end{macrocode} |
| 23114 |
% \end{macro} |
| 23115 |
% |
| 23116 |
% \begin{macro}{GetIfcCenter} |
| 23117 |
% Get the center node of a interface, either by specifying the name of the component and the interface number |
| 23118 |
% \begin{pssyntax} |
| 23119 |
% \PSvar{IfcNum} \PSstring{CompName} \PSop{GetIfcCenter} \PSvar{X Y} |
| 23120 |
% \end{pssyntax} |
| 23121 |
% or by passing an interface procedure generated by \PSvar{PushAllPlanesOnStack}. |
| 23122 |
% \begin{pssyntax} |
| 23123 |
% \PSproc{Ifc} \PSop{GetIfcCenter} \PSvar{X Y} |
| 23124 |
% \end{pssyntax} |
| 23125 |
% \begin{macrocode} |
| 23126 |
/GetIfcCenter { |
| 23127 |
(GetIfcCenter) DebugBegin |
| 23128 |
dup type /stringtype eq not { |
| 23129 |
dup xcheck not { |
| 23130 |
% \end{macrocode} |
| 23131 |
% ambiguous |
| 23132 |
% \begin{macrocode} |
| 23133 |
0 get (C) exch |
| 23134 |
} { |
| 23135 |
exec pop pop pop |
| 23136 |
} ifelse |
| 23137 |
} if |
| 23138 |
cvn load begin |
| 23139 |
IfcName load begin |
| 23140 |
currentdict /RX known { |
| 23141 |
X RX sub Y RY sub |
| 23142 |
} { |
| 23143 |
X Y |
| 23144 |
} ifelse |
| 23145 |
CompMtrx transform CM itransform |
| 23146 |
end |
| 23147 |
end |
| 23148 |
DebugEnd |
| 23149 |
} bind def |
| 23150 |
% \end{macrocode} |
| 23151 |
% \end{macro} |
| 23152 |
% |
| 23153 |
% \begin{macro}{GetIfcCenterCorr} |
| 23154 |
% Get the coordinates of an interface node. This checks if corrected |
| 23155 |
% coordinates for proper connection handling are available. |
| 23156 |
% \begin{pssyntax} |
| 23157 |
% \PSvar{IfcNum} \PSstring{CompName} \PSop{GetIfcCenterCorr} \PSvar{X|XCorr Y|YCorr} |
| 23158 |
% \end{pssyntax} |
| 23159 |
% \begin{macrocode} |
| 23160 |
/GetIfcCenterCorr { |
| 23161 |
(GetIfcCenterCorr) DebugBegin |
| 23162 |
cvn load begin |
| 23163 |
IfcName load begin |
| 23164 |
currentdict /XCorr known { |
| 23165 |
XCorr YCorr |
| 23166 |
}{ |
| 23167 |
X Y |
| 23168 |
} ifelse |
| 23169 |
currentdict /RX known { |
| 23170 |
RX neg RY neg VecAdd |
| 23171 |
} if |
| 23172 |
CompMtrx transform CM itransform |
| 23173 |
end |
| 23174 |
end |
| 23175 |
DebugEnd |
| 23176 |
} bind def |
| 23177 |
% \end{macrocode} |
| 23178 |
% \end{macro} |
| 23179 |
% |
| 23180 |
% \begin{macro}{TransformInVec} |
| 23181 |
% Transform the input vector as specified with \opt{beamangle} and |
| 23182 |
% \opt{beamdiv} from coordinates relative to the connection between first and |
| 23183 |
% second components to absolute coordinates. |
| 23184 |
% \begin{pssyntax} |
| 23185 |
% \PSproc{Ifc2} \PSproc{Ifc1} \PSproc{InVec} \PSop{TransformInVec} \PSproc{InVec'} |
| 23186 |
% \end{pssyntax} |
| 23187 |
% \begin{macrocode} |
| 23188 |
/TransformInVec { |
| 23189 |
(TransformInVec) DebugBegin |
| 23190 |
3 1 roll |
| 23191 |
GetIfcCenter 4 2 roll |
| 23192 |
GetIfcCenter 5 -2 roll |
| 23193 |
@ABVect |
| 23194 |
3 -1 roll exec 2 copy 6 2 roll |
| 23195 |
0 eq exch 0 eq and not { |
| 23196 |
% \end{macrocode} |
| 23197 |
% invec != (0,0) |
| 23198 |
% \begin{macrocode} |
| 23199 |
exch atan matrix rotate dtransform |
| 23200 |
} { |
| 23201 |
4 2 roll pop pop |
| 23202 |
} ifelse |
| 23203 |
ToVec |
| 23204 |
DebugEnd |
| 23205 |
} bind def |
| 23206 |
% \end{macrocode} |
| 23207 |
% \end{macro} |
| 23208 |
% |
| 23209 |
% \begin{macro}{TransformStartPos} |
| 23210 |
% Startpos is relative to the connection between first and second components |
| 23211 |
% transform to absolute coordinates and shift by first plane center |
| 23212 |
% Plane2 Plane1 \PSproc{StartPos} -> \PSproc{StartPos'+Plane1Center} |
| 23213 |
% \begin{macrocode} |
| 23214 |
/TransformStartPos { |
| 23215 |
(TransformStartPos) DebugBegin |
| 23216 |
exec 2 copy 6 2 roll 0 eq exch 0 eq and not |
| 23217 |
3 1 roll GetIfcCenter 4 2 roll |
| 23218 |
GetIfcCenter 5 2 roll { |
| 23219 |
2 copy 8 2 roll |
| 23220 |
@ABVect exch atan matrix rotate dtransform |
| 23221 |
VecAdd |
| 23222 |
} { |
| 23223 |
6 2 roll pop pop pop pop |
| 23224 |
} ifelse |
| 23225 |
ToVec |
| 23226 |
DebugEnd |
| 23227 |
} bind def |
| 23228 |
% \end{macrocode} |
| 23229 |
% \end{macro} |
| 23230 |
% |
| 23231 |
% \begin{macro}{GetNearestPlane} |
| 23232 |
% \begin{pssyntax} |
| 23233 |
% \PSvar{X Y} \PSstring{CompName} \PSop{GetNearestPlane} \PSvar{PlaneNumber} |
| 23234 |
% \end{pssyntax} |
| 23235 |
% \begin{macrocode} |
| 23236 |
/GetNearestPlane { |
| 23237 |
(GetNearestPlane) DebugBegin |
| 23238 |
3 copy 1 exch GetIfcCenter @ABDist /dist ED /nearestPlane 1 def |
| 23239 |
dup cvn load /N get 2 1 3 -1 roll { |
| 23240 |
% \end{macrocode} |
| 23241 |
% iterate through plane 2 to plane N of CompName |
| 23242 |
% \begin{macrocode} |
| 23243 |
4 copy exch GetIfcCenter @ABDist dup dist lt { |
| 23244 |
/dist ED /nearestPlane ED |
| 23245 |
} { |
| 23246 |
pop pop |
| 23247 |
} ifelse |
| 23248 |
} for |
| 23249 |
pop pop pop nearestPlane |
| 23250 |
DebugEnd |
| 23251 |
} bind def |
| 23252 |
% \end{macrocode} |
| 23253 |
% \end{macro} |
| 23254 |
% |
| 23255 |
% \begin{macro}{PushAmbCompPlanesOnStack} |
| 23256 |
% Components which do not have an unambiguous behaviour (beamslitter, can |
| 23257 |
% transmit and reflect) like lenses (transmission only) or mirrors (reflection |
| 23258 |
% only), must be evaluated to see which mode should be used. Argument is |
| 23259 |
% [(name) draw], draw is a boolean which is true if the inner beams should be |
| 23260 |
% drawn. |
| 23261 |
% \begin{macrocode} |
| 23262 |
/PushAmbCompPlanesOnStack { |
| 23263 |
(PushAmbCompPlanesOnStack) DebugBegin |
| 23264 |
currentdict /outToPlane undef |
| 23265 |
PN IfcCnt eq not { |
| 23266 |
% \end{macrocode} |
| 23267 |
% not the last component, there should be another one on the stack |
| 23268 |
% \begin{macrocode} |
| 23269 |
exch dup 3 1 roll % nextifc ambcomp nextifc |
| 23270 |
dup xcheck not { |
| 23271 |
% \end{macrocode} |
| 23272 |
% the next component is also ambiguous, use its center point as reference. |
| 23273 |
% \begin{macrocode} |
| 23274 |
0 get (C) exch |
| 23275 |
} { |
| 23276 |
% \end{macrocode} |
| 23277 |
% otherwise use the interface on the stack |
| 23278 |
% \begin{macrocode} |
| 23279 |
exec pop pop pop |
| 23280 |
} ifelse |
| 23281 |
[ 3 1 roll ] cvx /outToPlane ED |
| 23282 |
% \end{macrocode} |
| 23283 |
% outToPlane is \PSproc{(PN) (compName)} |
| 23284 |
% \begin{macrocode} |
| 23285 |
} if |
| 23286 |
% \end{macrocode} |
| 23287 |
% the old plane number, without counting the additional planes of the current ambcomp |
| 23288 |
% \begin{macrocode} |
| 23289 |
/IfcCntTmp IfcCnt def |
| 23290 |
% \end{macrocode} |
| 23291 |
% Load some parameters from \opt{ambcomp} |
| 23292 |
% \begin{macrocode} |
| 23293 |
aload pop /draw ED /name ED |
| 23294 |
name cvn load /N get dup /N ED |
| 23295 |
% \end{macrocode} |
| 23296 |
% If the ambiguous component has only one interface, there exists no internal beam |
| 23297 |
% \begin{macrocode} |
| 23298 |
1 eq { /draw true def } if |
| 23299 |
% \end{macrocode} |
| 23300 |
% \PSvar{CurrTmp} is the current point of the beam on the interface |
| 23301 |
% prior to the ambiguos component, \PSvar{CurrVecTmp} its outgoing |
| 23302 |
% vector. For wide beams, the lower ray is used. These vectors will be |
| 23303 |
% changed inside this procedure. |
| 23304 |
% \begin{macrocode} |
| 23305 |
currentdict /Curr known { |
| 23306 |
/CurrTmp /Curr load def |
| 23307 |
/CurrVecTmp /CurrVec load def |
| 23308 |
} { |
| 23309 |
/CurrTmp /CurrLow load def |
| 23310 |
/CurrVecTmp /CurrVecLow load def |
| 23311 |
} ifelse |
| 23312 |
PN 1 eq { |
| 23313 |
% \end{macrocode} |
| 23314 |
% If it is the first interface, the starting point is always the (C) |
| 23315 |
% plane, the mode is set arbitrarily to transmittive. |
| 23316 |
% \begin{macrocode} |
| 23317 |
[ (C) name name GetRefIndex trans draw] cvx |
| 23318 |
% \end{macrocode} |
| 23319 |
% Now check which is the outgoing plane |
| 23320 |
% \begin{macrocode} |
| 23321 |
name /outToPlane load GetNextPlane |
| 23322 |
dup 0 eq not { |
| 23323 |
% \end{macrocode} |
| 23324 |
% If there is one, i.e. if \PSvar{GetNextPlane} leaves something not |
| 23325 |
% equal to \PSvar{0} on the stack, this is the plane. |
| 23326 |
% \begin{macrocode} |
| 23327 |
[ exch name bgRefIndex trans draw ] cvx exch |
| 23328 |
/IfcCntTmp IfcCntTmp 1 add def |
| 23329 |
} { |
| 23330 |
pop |
| 23331 |
} ifelse |
| 23332 |
}{ |
| 23333 |
% \end{macrocode} |
| 23334 |
% It is not the first component, check which interface of the component |
| 23335 |
% is the nearest one to the current beam point and save its name in |
| 23336 |
% \PSvar{firstPlane}. |
| 23337 |
% \begin{macrocode} |
| 23338 |
CurrTmp name GetNearestPlane dup /firstPlane ED |
| 23339 |
name isAmbiguousIfc not { |
| 23340 |
% \end{macrocode} |
| 23341 |
% The first interface is not the ambiguous one, put it on the stack and |
| 23342 |
% calculated the new beam vector. |
| 23343 |
% \begin{macrocode} |
| 23344 |
firstPlane name |
| 23345 |
name firstPlane GetIfcMode |
| 23346 |
connectifc { bgRefIndex }{ name GetRefIndex } ifelse |
| 23347 |
CurrTmp CurrVecTmp |
| 23348 |
10 dict begin HandleInterface end pop |
| 23349 |
ToVec /CurrVecTmp ED ToVec /CurrTmp ED |
| 23350 |
[ firstPlane name |
| 23351 |
connectifc { |
| 23352 |
bgRefIndex |
| 23353 |
}{ |
| 23354 |
name GetRefIndex |
| 23355 |
} ifelse |
| 23356 |
name firstPlane GetIfcMode |
| 23357 |
% \end{macrocode} |
| 23358 |
% always draw to first interface |
| 23359 |
% \begin{macrocode} |
| 23360 |
true ] cvx |
| 23361 |
/IfcCntTmp IfcCntTmp 1 add def |
| 23362 |
} if |
| 23363 |
PN IfcCnt eq { |
| 23364 |
% \end{macrocode} |
| 23365 |
% Its the last comp, just put the ambiguous interface on the stack, the mode is irrelevant. |
| 23366 |
% \begin{macrocode} |
| 23367 |
[ (C) name |
| 23368 |
name GetRefIndex |
| 23369 |
trans draw ] cvx |
| 23370 |
IfcCntTmp IfcCnt gt { exch } if |
| 23371 |
}{ |
| 23372 |
% \end{macrocode} |
| 23373 |
% Otherwise put the ambiguous interface on the stack and check its mode. |
| 23374 |
% \begin{macrocode} |
| 23375 |
beamdiffractionorder null eq not name cvn load /grating get and { |
| 23376 |
% \end{macrocode} |
| 23377 |
% A grating (AOM) and a beamdiffractionorder was selected. In that case, |
| 23378 |
% \opt{beammode} has no effect, and for beamdiffractionorder=0 the |
| 23379 |
% interface is transmittive, otherwise refl or refltrans |
| 23380 |
% \begin{macrocode} |
| 23381 |
beamdiffractionorder dup 0 eq { pop () } if |
| 23382 |
(C) exch 20 string cvs strcat |
| 23383 |
dup (P@) exch strcat cvn name cvn load exch known not { |
| 23384 |
% \end{macrocode} |
| 23385 |
% The choosen beamdiffractionorder is not defined, select the closest one and issue a warning |
| 23386 |
% \begin{macrocode} |
| 23387 |
pop beamdiffractionorder dup sign neg 1 { |
| 23388 |
(C) exch 5 string cvs dup 3 1 roll strcat |
| 23389 |
dup (P@) exch strcat cvn name cvn load exch known { |
| 23390 |
3 -1 roll pop |
| 23391 |
(Diffraction order ) beamdiffractionorder 5 string cvs strcat |
| 23392 |
( is not defined, using ) 4 -1 roll strcat strcat Warning |
| 23393 |
exit |
| 23394 |
} { |
| 23395 |
pop |
| 23396 |
} ifelse |
| 23397 |
} for |
| 23398 |
} if |
| 23399 |
/@@centerifc ED |
| 23400 |
mark @@centerifc name name GetRefIndex |
| 23401 |
beamdiffractionorder 0 eq { |
| 23402 |
trans |
| 23403 |
}{ |
| 23404 |
name @@centerifc GetIfcMode refltrans eq { |
| 23405 |
refltrans |
| 23406 |
}{ |
| 23407 |
refl |
| 23408 |
} ifelse |
| 23409 |
} ifelse |
| 23410 |
}{ |
| 23411 |
/@@centerifc (C) def |
| 23412 |
[ @@centerifc name |
| 23413 |
name GetRefIndex |
| 23414 |
beammode auto eq { |
| 23415 |
CurrVecTmp @@centerifc name GetPlaneVec |
| 23416 |
name @@centerifc GetIfcMode refltrans eq { -90 matrix rotate dtransform } if |
| 23417 |
NormalVec outToPlane GetIfcCenter @@centerifc name GetIfcCenter @ABVect DotProd |
| 23418 |
0 lt { |
| 23419 |
trans |
| 23420 |
}{ |
| 23421 |
name @@centerifc GetIfcMode |
| 23422 |
refltrans eq { |
| 23423 |
refltrans |
| 23424 |
}{ |
| 23425 |
refl |
| 23426 |
} ifelse |
| 23427 |
} ifelse |
| 23428 |
} { |
| 23429 |
beammode dup refl eq { |
| 23430 |
% \end{macrocode} |
| 23431 |
% in case, the ambiguous interface is refltrans |
| 23432 |
% \begin{macrocode} |
| 23433 |
pop name @@centerifc GetIfcMode dup refltrans eq not { pop refl } if |
| 23434 |
} if |
| 23435 |
} ifelse |
| 23436 |
} ifelse |
| 23437 |
dup 6 1 roll |
| 23438 |
% \end{macrocode} |
| 23439 |
% if the ambiguous interface is the first, always draw to it |
| 23440 |
% \begin{macrocode} |
| 23441 |
IfcCntTmp IfcCnt eq { true }{ draw } ifelse |
| 23442 |
] cvx |
| 23443 |
@@centerifc name 4 -1 roll |
| 23444 |
connectifc { bgRefIndex }{ name GetRefIndex } ifelse |
| 23445 |
CurrTmp CurrVecTmp |
| 23446 |
10 dict begin HandleInterface end pop |
| 23447 |
ToVec /CurrVecTmp ED ToVec /CurrTmp ED |
| 23448 |
% \end{macrocode} |
| 23449 |
% now check which is the outgoing plane |
| 23450 |
% \begin{macrocode} |
| 23451 |
name /outToPlane load GetNextPlane |
| 23452 |
dup dup name isAmbiguousIfc exch 0 eq or not { |
| 23453 |
[ exch name bgRefIndex trans draw ] cvx exch |
| 23454 |
firstPlane name isAmbiguousIfc not { 3 -1 roll } if |
| 23455 |
/IfcCntTmp IfcCntTmp 1 add def |
| 23456 |
} { |
| 23457 |
pop |
| 23458 |
% \end{macrocode} |
| 23459 |
% The ambiguous interface is the last one, correct it to have the bgRefIndex. |
| 23460 |
% \begin{macrocode} |
| 23461 |
exec 3 -1 roll pop bgRefIndex 3 1 roll [ 6 1 roll ] cvx |
| 23462 |
firstPlane name isAmbiguousIfc not { exch } if |
| 23463 |
} ifelse |
| 23464 |
} ifelse |
| 23465 |
} ifelse |
| 23466 |
/IfcCnt IfcCntTmp def |
| 23467 |
DebugEnd |
| 23468 |
} bind def |
| 23469 |
% \end{macrocode} |
| 23470 |
% \end{macro} |
| 23471 |
% |
| 23472 |
% \begin{macro}{GetNextPlane} |
| 23473 |
% \PSstring{comp} \PSproc{outToPlane} \PSop{GetNextPlane} \PSvar{PlaneNumber} |
| 23474 |
% \begin{macrocode} |
| 23475 |
/GetNextPlane { |
| 23476 |
(GetNextPlane) DebugBegin |
| 23477 |
2 copy (C) 3 -1 roll |
| 23478 |
GetIfcCenter 3 -1 roll |
| 23479 |
exec GetIfcCenter |
| 23480 |
4 2 roll 4 copy @ABVect ToVec /Vec ED |
| 23481 |
@ABDist /centerDist ED |
| 23482 |
/sprod 1 def |
| 23483 |
/nextPlane 0 def |
| 23484 |
exch dup 3 1 roll |
| 23485 |
cvn load dup /ambIfc get /ambIfc ED /N get 1 1 3 -1 roll { |
| 23486 |
% \end{macrocode} |
| 23487 |
% iterate through all interfaces of CompName which do not coincide with the ambiguous interface |
| 23488 |
% \begin{macrocode} |
| 23489 |
dup ambIfc eq not { |
| 23490 |
3 copy 3 -1 roll 2 copy |
| 23491 |
GetPlaneVec Vec 4 2 roll NormalVec |
| 23492 |
Vec DotProd dup sprod lt 5 2 roll |
| 23493 |
GetIfcCenter 3 -1 roll exec GetIfcCenter @ABDist |
| 23494 |
centerDist lt and |
| 23495 |
centerDist -1 eq { pop dup 0 gt } if |
| 23496 |
{ /sprod ED /nextPlane ED } { pop pop } ifelse |
| 23497 |
} { |
| 23498 |
pop |
| 23499 |
} ifelse |
| 23500 |
} for |
| 23501 |
pop pop nextPlane |
| 23502 |
DebugEnd |
| 23503 |
} bind def |
| 23504 |
% \end{macrocode} |
| 23505 |
% \end{macro} |
| 23506 |
% |
| 23507 |
% \begin{macro}{TraceBeam} |
| 23508 |
% [ CompN ... Comp1 \PSproc{options} \PSproc{start point} \PSvar{beamangle} |
| 23509 |
% -> Yn Xn drawToN? ... Y1 X1 drawTo1? Y0 X0 |
| 23510 |
% \begin{macrocode} |
| 23511 |
/TraceBeam { |
| 23512 |
(Tracebeam) DebugBegin |
| 23513 |
AngToVec /InVec ED /StartPoint ED |
| 23514 |
/oldbeaminsidelast currentdict /beaminsidelast known { |
| 23515 |
beaminsidelast |
| 23516 |
} { |
| 23517 |
false |
| 23518 |
} ifelse def |
| 23519 |
% \end{macrocode} |
| 23520 |
% execute options |
| 23521 |
% \begin{macrocode} |
| 23522 |
exec |
| 23523 |
connectifc { |
| 23524 |
/nbeam bgRefIndex def |
| 23525 |
} if |
| 23526 |
/startinside startinside beaminsidefirst or def |
| 23527 |
/stopinside stopinside beaminsidelast or def |
| 23528 |
/PrevCorrect false def |
| 23529 |
PrearrangePlanes |
| 23530 |
PushAllPlanesOnStack |
| 23531 |
currentdict /lastVecTmp known { |
| 23532 |
lastVecTmp beamangle matrix rotate dtransform ToVec |
| 23533 |
} { |
| 23534 |
counttomark 2 ge beamalign relative eq and { |
| 23535 |
2 copy /InVec load TransformInVec |
| 23536 |
} { |
| 23537 |
/InVec load |
| 23538 |
} ifelse |
| 23539 |
} ifelse |
| 23540 |
/CurrVec ED |
| 23541 |
currentdict /lastBeamPointTmp known { |
| 23542 |
/lastBeamPointTmp load /Curr ED |
| 23543 |
}{ |
| 23544 |
counttomark 2 ge { |
| 23545 |
2 copy /StartPoint load TransformStartPos |
| 23546 |
} { |
| 23547 |
/StartPoint load |
| 23548 |
} ifelse |
| 23549 |
/Curr ED |
| 23550 |
} ifelse |
| 23551 |
counttomark /IfcCnt ED |
| 23552 |
% \end{macrocode} |
| 23553 |
% Init the refractive index |
| 23554 |
% \begin{macrocode} |
| 23555 |
/n1 bgRefIndex def |
| 23556 |
/PN 1 def |
| 23557 |
(start looping) DebugMsg |
| 23558 |
{ |
| 23559 |
PN IfcCnt gt { |
| 23560 |
exit |
| 23561 |
} if |
| 23562 |
(checked) DebugMsg |
| 23563 |
beampathcount 0 eq { |
| 23564 |
cleartomark mark exit |
| 23565 |
} if |
| 23566 |
% \end{macrocode} |
| 23567 |
% iterate over all planes |
| 23568 |
% \begin{macrocode} |
| 23569 |
dup xcheck not { |
| 23570 |
% \end{macrocode} |
| 23571 |
% array, not executable |
| 23572 |
% \begin{macrocode} |
| 23573 |
PushAmbCompPlanesOnStack |
| 23574 |
} if |
| 23575 |
exec |
| 23576 |
/draw ED /Mode ED /n2 ED 2 copy /CompName ED /IfcNum ED |
| 23577 |
GetIfcCenter ToVec /CurrCenter ED |
| 23578 |
Curr CurrVec |
| 23579 |
connectifc PrevCorrect PN 2 gt and PN 2 eq or and { |
| 23580 |
CurrVec CurrCenter PrevCenter PrevMode |
| 23581 |
currentdict /relAngle known |
| 23582 |
{ relAngle } { 0 } ifelse connectInterfaces |
| 23583 |
/relAngle ED |
| 23584 |
} if |
| 23585 |
% \end{macrocode} |
| 23586 |
% Adjust the alignment of a node interface, if it is to be aligned |
| 23587 |
% perpendicular to the beam vector (beamnodealign=vector). |
| 23588 |
% \begin{macrocode} |
| 23589 |
CompName cvn load begin |
| 23590 |
currentdict /adjustRel known aligntovector and { |
| 23591 |
IfcNum IfcName load begin |
| 23592 |
currentdict /RX known not { |
| 23593 |
% \end{macrocode} |
| 23594 |
% Only exchange the coordinates of the beam vector, the sign is not |
| 23595 |
% important for the interface vector. |
| 23596 |
% \begin{macrocode} |
| 23597 |
2 copy neg exch CM dtransform CompMtrx idtransform |
| 23598 |
/DY ED /DX ED |
| 23599 |
} if |
| 23600 |
end |
| 23601 |
} if |
| 23602 |
end |
| 23603 |
IfcNum CompName Mode n2 8 4 roll HandleInterface |
| 23604 |
missed eq { |
| 23605 |
counttomark PN 1 sub 3 mul sub {pop} repeat |
| 23606 |
(The beam missed an interface) Warning exit |
| 23607 |
exit |
| 23608 |
} if |
| 23609 |
PN 1 eq { |
| 23610 |
pop pop |
| 23611 |
/draw beaminsidefirst oldbeaminsidelast xor def |
| 23612 |
} { |
| 23613 |
ToVec /CurrVec ED |
| 23614 |
} ifelse |
| 23615 |
2 copy |
| 23616 |
ToVec /Curr ED |
| 23617 |
draw PN beampathskip 1 add gt and |
| 23618 |
counttomark 3 roll |
| 23619 |
/PrevCenter /CurrCenter load def |
| 23620 |
/lastBeamPointTmp /Curr load def |
| 23621 |
currentdict /lastVecTmp known { |
| 23622 |
/prevVecTmp /lastVecTmp load def |
| 23623 |
/lastVecTmp /CurrVec load def |
| 23624 |
} { |
| 23625 |
/CurrVec load dup /lastVecTmp ED /prevVecTmp ED |
| 23626 |
} ifelse |
| 23627 |
/PrevMode Mode def |
| 23628 |
CompName cvn load /correct get /PrevCorrect ED |
| 23629 |
PN IfcCnt eq { |
| 23630 |
exit |
| 23631 |
} { |
| 23632 |
CurrVec 0 eq exch 0 eq and { |
| 23633 |
IfcCnt PN sub {pop} repeat |
| 23634 |
(Total internal reflection occured, this is not supported) |
| 23635 |
Warning |
| 23636 |
exit |
| 23637 |
} if |
| 23638 |
beampathcount 1 add PN eq { |
| 23639 |
IfcCnt PN sub {pop} repeat |
| 23640 |
exit |
| 23641 |
} if |
| 23642 |
/PN PN 1 add def |
| 23643 |
} ifelse |
| 23644 |
} loop |
| 23645 |
DebugEnd |
| 23646 |
} bind def |
| 23647 |
% \end{macrocode} |
| 23648 |
% \end{macro} |
| 23649 |
% |
| 23650 |
% |
| 23651 |
% \begin{macro}{sign} |
| 23652 |
% \begin{macrocode} |
| 23653 |
/sign { |
| 23654 |
0 ge { 1 } { -1 } ifelse |
| 23655 |
} bind def |
| 23656 |
% \end{macrocode} |
| 23657 |
% \end{macro} |
| 23658 |
% |
| 23659 |
% \begin{macro}{Chirality} |
| 23660 |
% \begin{macrocode} |
| 23661 |
/Chirality { |
| 23662 |
4 -1 roll mul 3 1 roll mul sub sign |
| 23663 |
} bind def |
| 23664 |
% \end{macrocode} |
| 23665 |
% \end{macro} |
| 23666 |
% |
| 23667 |
% \begin{macro}{TraceInterfacePath} |
| 23668 |
% \begin{macrocode} |
| 23669 |
/TraceInterfacePath { |
| 23670 |
tx@IntersectDict begin |
| 23671 |
/ArrowA { {currentpoint} stopped {moveto}{pop pop pop pop} ifelse } def |
| 23672 |
{} TraceCurveOrPath |
| 23673 |
currentdict /ArrowA undef |
| 23674 |
end |
| 23675 |
} bind def |
| 23676 |
% \end{macrocode} |
| 23677 |
% \end{macro} |
| 23678 |
% |
| 23679 |
% \begin{macro}{TraceAndFillWideBeam} |
| 23680 |
% Fill a wide beam. This has an own procedure, because each segment |
| 23681 |
% of the beam must be filled separately. |
| 23682 |
% \begin{pssyntax} |
| 23683 |
% \PSvar{[} \PSstring{CompN} \PSvar{\ldots{}} \PSstring{Comp1} |
| 23684 |
% \PSproc{options} \PSproc{start point up} \PSvar{beamangle\_up} |
| 23685 |
% \PSproc{start point low} \PSvar{beamangle\_low} \PSop{FillWideBeam} |
| 23686 |
% \end{pssyntax} |
| 23687 |
% \begin{macrocode} |
| 23688 |
/TraceAndFillWideBeam { |
| 23689 |
(TraceAndFillWideBeam) DebugBegin |
| 23690 |
AngToVec /InvecLow ED /StartLow ED |
| 23691 |
AngToVec /InvecUp ED /StartUp ED |
| 23692 |
% \end{macrocode} |
| 23693 |
% execute user options |
| 23694 |
% \begin{macrocode} |
| 23695 |
exec |
| 23696 |
connectifc { |
| 23697 |
/nbeam bgRefIndex def |
| 23698 |
} if |
| 23699 |
/startinside startinside beaminsidefirst or def |
| 23700 |
/stopinside stopinside beaminsidelast or def |
| 23701 |
% \end{macrocode} |
| 23702 |
% Number of segments already drawn |
| 23703 |
% \begin{macrocode} |
| 23704 |
/DrawnSegm 0 def |
| 23705 |
% \end{macrocode} |
| 23706 |
% whether the previous plane required correction of the input vector (used only with \opt{connectifc}) |
| 23707 |
% \begin{macrocode} |
| 23708 |
/PrevCorrect false def |
| 23709 |
PrearrangePlanes |
| 23710 |
PushAllPlanesOnStack |
| 23711 |
currentdict /lastVecTmpUp known |
| 23712 |
currentdict /lastVecTmpLow known and { |
| 23713 |
/CurrVecLow lastVecTmpLow beamangle matrix rotate dtransform ToVec def |
| 23714 |
/CurrVecUp lastVecTmpUp beamangle matrix rotate dtransform ToVec def |
| 23715 |
}{ |
| 23716 |
% \end{macrocode} |
| 23717 |
% If the \opt{beamangle} is not absolute, use the connection between the first |
| 23718 |
% two planes as reference and transform the input vectors accordingly. |
| 23719 |
% \begin{macrocode} |
| 23720 |
beamalign relative eq counttomark 2 ge and { |
| 23721 |
2 copy /InvecLow load TransformInVec /CurrVecLow ED |
| 23722 |
2 copy /InvecUp load TransformInVec /CurrVecUp ED |
| 23723 |
} { |
| 23724 |
/CurrVecLow /InvecLow load def |
| 23725 |
/CurrVecUp /InvecUp load def |
| 23726 |
} ifelse |
| 23727 |
} ifelse |
| 23728 |
% \end{macrocode} |
| 23729 |
% If \opt{loadbeampoints} is set, the nodes \PSname{lastBeamPointTmpLow} and |
| 23730 |
% \PSname{lastBeamPointTmpUp} are defined and used as starting points. |
| 23731 |
% \begin{macrocode} |
| 23732 |
currentdict /lastBeamPointTmpLow known |
| 23733 |
currentdict /lastBeamPointTmpUp known and { |
| 23734 |
/lastBeamPointTmpLow load /CurrLow ED |
| 23735 |
/lastBeamPointTmpUp load /CurrUp ED |
| 23736 |
% \end{macrocode} |
| 23737 |
% The lower and upper beam vectors must possibly swapped if the |
| 23738 |
% intersection points are loaded from a previous beam, but the beam |
| 23739 |
% divergence is specified manually for this beam only. We must make |
| 23740 |
% sure, that negative divergence gives a contracting beam. |
| 23741 |
% \begin{macrocode} |
| 23742 |
loadbeam not beamdiv 0 eq not and { |
| 23743 |
CurrVecLow CurrVecUp Chirality |
| 23744 |
CurrLow CurrUp @ABVect CurrVecLow CurrVecUp VecAdd Chirality 0 lt { neg } if |
| 23745 |
beamdiv sign eq not { |
| 23746 |
/CurrVecLow load /CurrVecUp load /CurrVecLow ED /CurrVecUp ED |
| 23747 |
} if |
| 23748 |
} if |
| 23749 |
} { |
| 23750 |
% \end{macrocode} |
| 23751 |
% Transform the beam vectors relative to the connection between the first two interfaces. |
| 23752 |
% \begin{macrocode} |
| 23753 |
counttomark 2 ge { |
| 23754 |
2 copy /StartLow load TransformStartPos /CurrLow ED |
| 23755 |
2 copy /StartUp load TransformStartPos /CurrUp ED |
| 23756 |
} { |
| 23757 |
/StartLow load /CurrLow ED |
| 23758 |
/StartUp load /CurrUp ED |
| 23759 |
} ifelse |
| 23760 |
} ifelse |
| 23761 |
/PrevVecUp /CurrVecUp load def |
| 23762 |
/PrevVecLow /CurrVecLow load def |
| 23763 |
% \end{macrocode} |
| 23764 |
% \PSvar{IfcCnt} is the number of interfaces pushed on the stack by |
| 23765 |
% \PSvar{PushAllPlanesOnStack}. This number may be corrected later if an |
| 23766 |
% ambiguous components is among them. |
| 23767 |
% \begin{macrocode} |
| 23768 |
counttomark /IfcCnt ED |
| 23769 |
/n1 bgRefIndex def |
| 23770 |
/CurrR false def |
| 23771 |
/CurrPath false def |
| 23772 |
/CurrUpT false def |
| 23773 |
/CurrLowT false def |
| 23774 |
/ret missed def |
| 23775 |
/PN 1 def |
| 23776 |
{ |
| 23777 |
PN IfcCnt gt { |
| 23778 |
exit |
| 23779 |
} if |
| 23780 |
beampathcount 0 eq { |
| 23781 |
cleartomark mark exit |
| 23782 |
} if |
| 23783 |
dup xcheck not { |
| 23784 |
% \end{macrocode} |
| 23785 |
% Found an array (not executable) instead of a procedure. This is an ambiguous |
| 23786 |
% component, resolve the interfaces depending on the input vector and |
| 23787 |
% surrounding interfaces. This can change \PSvar{IfcCnt}. |
| 23788 |
% \begin{macrocode} |
| 23789 |
PushAmbCompPlanesOnStack |
| 23790 |
} if |
| 23791 |
% \end{macrocode} |
| 23792 |
% push the interface on the stack |
| 23793 |
% \begin{macrocode} |
| 23794 |
exec |
| 23795 |
% \end{macrocode} |
| 23796 |
% \PSvar{draw} indicates if the beam to the current interface should be drawn. |
| 23797 |
% \begin{macrocode} |
| 23798 |
PN beampathskip 1 add gt and /draw ED |
| 23799 |
% \end{macrocode} |
| 23800 |
% \PSvar{Mode} stores the mode (transmittive or reflective) of the current interface. |
| 23801 |
% \begin{macrocode} |
| 23802 |
/Mode ED /n2 ED 2 copy /CompName ED /IfcNum ED |
| 23803 |
% \end{macrocode} |
| 23804 |
% \PSvar{CurrPCenter} holds the coordinates of the current interface center. |
| 23805 |
% \begin{macrocode} |
| 23806 |
GetIfcCenter ToVec /CurrPCenter ED |
| 23807 |
/oldn1 n1 def |
| 23808 |
% \end{macrocode} |
| 23809 |
% Adjust the alignment of a node interface, if it is to be aligned |
| 23810 |
% perpendicular to the beam vector (beamnodealign=vector). The alignment |
| 23811 |
% is carried out with the median vector of upper and lower beam. |
| 23812 |
% \begin{macrocode} |
| 23813 |
CompName cvn load /adjustRel known aligntovector and { |
| 23814 |
connectifc PrevCorrect PN 2 gt and PN 2 eq or and { |
| 23815 |
CurrVecUp CurrVecUp CurrPCenter PrevPCenter PrevMode |
| 23816 |
currentdict /relAngleUp known { relAngleUp } { 0 } ifelse |
| 23817 |
connectInterfaces pop |
| 23818 |
CurrVecLow CurrVecLow CurrPCenter PrevPCenter PrevMode |
| 23819 |
currentdict /relAngleLow known { relAngleLow } { 0 } ifelse |
| 23820 |
connectInterfaces pop |
| 23821 |
} { |
| 23822 |
CurrVecUp CurrVecLow |
| 23823 |
} ifelse |
| 23824 |
VecAdd NormalizeVec |
| 23825 |
CompName cvn load begin |
| 23826 |
IfcNum IfcName load begin |
| 23827 |
currentdict /RX known not { |
| 23828 |
CM dtransform CompMtrx idtransform |
| 23829 |
/DX ED neg /DY ED |
| 23830 |
} { |
| 23831 |
pop pop |
| 23832 |
} ifelse |
| 23833 |
end |
| 23834 |
end |
| 23835 |
} if |
| 23836 |
% \end{macrocode} |
| 23837 |
% Calculate new upper vector and intersection point |
| 23838 |
% \begin{macrocode} |
| 23839 |
CurrUp CurrVecUp |
| 23840 |
connectifc PrevCorrect PN 2 gt and PN 2 eq or and { |
| 23841 |
CurrVecUp CurrPCenter PrevPCenter PrevMode |
| 23842 |
currentdict /relAngleUp known { relAngleUp } { 0 } ifelse |
| 23843 |
connectInterfaces /relAngleUp ED |
| 23844 |
} if |
| 23845 |
/PrevUp /CurrUp load def |
| 23846 |
/PrevUpT /CurrUpT load def |
| 23847 |
/PrevPath /CurrPath load def |
| 23848 |
IfcNum CompName Mode n2 8 4 roll HandleInterface |
| 23849 |
dup /ret ED |
| 23850 |
missed eq { |
| 23851 |
counttomark {pop} repeat |
| 23852 |
(The upper beam missed an interface) Warning exit |
| 23853 |
} if |
| 23854 |
ToVec /CurrVecUp ED |
| 23855 |
ToVec /CurrUp ED |
| 23856 |
currentdict /isectT known currentdict /isectPath known and { |
| 23857 |
/CurrUpT isectT def |
| 23858 |
/CurrPath isectPath def |
| 23859 |
} if |
| 23860 |
/n1 oldn1 def |
| 23861 |
% \end{macrocode} |
| 23862 |
% Calculate new lower vector and intersection point |
| 23863 |
% \begin{macrocode} |
| 23864 |
/PrevLow /CurrLow load def |
| 23865 |
/PrevLowT /CurrLowT load def |
| 23866 |
CurrLow CurrVecLow |
| 23867 |
connectifc PrevCorrect PN 2 gt and PN 2 eq or and { |
| 23868 |
CurrVecLow CurrPCenter PrevPCenter PrevMode |
| 23869 |
currentdict /relAngleLow known { relAngleLow } { 0 } ifelse |
| 23870 |
connectInterfaces /relAngleLow ED |
| 23871 |
} if |
| 23872 |
IfcNum CompName Mode n2 8 4 roll HandleInterface |
| 23873 |
dup missed eq { |
| 23874 |
/ret ED |
| 23875 |
(The lower beam missed an interface) Warning |
| 23876 |
counttomark {pop} repeat exit |
| 23877 |
} if |
| 23878 |
tir eq ret tir eq or { |
| 23879 |
/ret tir def |
| 23880 |
} { |
| 23881 |
/ret ok def |
| 23882 |
} ifelse |
| 23883 |
ToVec /CurrVecLow ED |
| 23884 |
ToVec /CurrLow ED |
| 23885 |
% \end{macrocode} |
| 23886 |
% lower done |
| 23887 |
% \begin{macrocode} |
| 23888 |
currentdict /isectT known { |
| 23889 |
/CurrLowT isectT def |
| 23890 |
} if |
| 23891 |
/PrevR CurrR def |
| 23892 |
PrevR type /realtype eq { |
| 23893 |
/CurrCenter load /PrevCenter ED |
| 23894 |
} if |
| 23895 |
IfcNum CompName isCurvedIfc { |
| 23896 |
IfcNum CompName LoadIfc |
| 23897 |
tx@Dict begin Pyth end /CurrR ED |
| 23898 |
ToVec /CurrCenter ED |
| 23899 |
} { |
| 23900 |
/CurrR false def |
| 23901 |
/CurrCenter false def |
| 23902 |
} ifelse |
| 23903 |
IfcNum CompName isPathIfc not { |
| 23904 |
/CurrPath false def |
| 23905 |
/CurrLowT false def |
| 23906 |
/CurrUpT false def |
| 23907 |
} if |
| 23908 |
PN 1 gt currentdict /fillBeam known and { |
| 23909 |
draw { |
| 23910 |
/DrawnSegm DrawnSegm 1 add def |
| 23911 |
PrevUp moveto CurrUp lineto |
| 23912 |
IfcNum CompName isCurvedIfc { |
| 23913 |
CurrCenter CurrUp CurrLow |
| 23914 |
4 copy 3 -1 roll eq 3 1 roll eq and { |
| 23915 |
6 {pop} repeat |
| 23916 |
} { |
| 23917 |
TangentCrosspoint |
| 23918 |
CurrLow CurrR arct |
| 23919 |
} ifelse |
| 23920 |
} { |
| 23921 |
IfcNum CompName isPathIfc { |
| 23922 |
CurrPath CurrUpT CurrLowT TraceInterfacePath |
| 23923 |
} { |
| 23924 |
CurrLow lineto |
| 23925 |
} ifelse |
| 23926 |
} ifelse |
| 23927 |
PrevLow lineto |
| 23928 |
PrevPath type /booleantype eq not { |
| 23929 |
PrevPath PrevLowT PrevUpT TraceInterfacePath |
| 23930 |
} { |
| 23931 |
PrevR type /booleantype eq not { |
| 23932 |
PrevCenter PrevLow PrevUp |
| 23933 |
4 copy 3 -1 roll eq 3 1 roll eq and { |
| 23934 |
6 {pop} repeat |
| 23935 |
} { |
| 23936 |
TangentCrosspoint |
| 23937 |
PrevUp PrevR arct |
| 23938 |
} ifelse |
| 23939 |
} { |
| 23940 |
PrevUp lineto |
| 23941 |
} ifelse |
| 23942 |
} ifelse |
| 23943 |
} if |
| 23944 |
Mode refl eq draw and |
| 23945 |
draw not DrawnSegm 0 gt and or { |
| 23946 |
fillBeam newpath |
| 23947 |
/DrawnSegm 0 def |
| 23948 |
} if |
| 23949 |
} if |
| 23950 |
PN 1 eq { |
| 23951 |
% \end{macrocode} |
| 23952 |
% At the first interface, we only determine the actual intersection |
| 23953 |
% points with the interfaces, the beam vectors are not changed and must |
| 23954 |
% be reset to the previous values. |
| 23955 |
% \begin{macrocode} |
| 23956 |
/CurrVecUp /PrevVecUp load def |
| 23957 |
/CurrVecLow /PrevVecLow load def |
| 23958 |
} if |
| 23959 |
% \end{macrocode} |
| 23960 |
% If the beam should also be stroked, push the coordinates and the 'draw' information on the stack |
| 23961 |
% \begin{macrocode} |
| 23962 |
strokeBeam { |
| 23963 |
CurrUp draw CurrLow draw counttomark 1 add 6 roll |
| 23964 |
} if |
| 23965 |
PN IfcCnt eq ret tir eq or |
| 23966 |
beampathcount 1 add PN eq or { |
| 23967 |
DrawnSegm 0 gt currentdict /fillBeam known and { |
| 23968 |
fillBeam newpath |
| 23969 |
/DrawnSegm 0 def |
| 23970 |
} if |
| 23971 |
IfcCnt PN sub {pop} repeat |
| 23972 |
ret tir eq { |
| 23973 |
(Total internal reflection occured, this is not supported) |
| 23974 |
Warning |
| 23975 |
} if |
| 23976 |
exit |
| 23977 |
} if |
| 23978 |
/PN PN 1 add def |
| 23979 |
/PrevVecUp /CurrVecUp load def |
| 23980 |
/PrevVecLow /CurrVecLow load def |
| 23981 |
/PrevPCenter /CurrPCenter load def |
| 23982 |
/PrevMode Mode def |
| 23983 |
CompName cvn load /correct get /PrevCorrect ED |
| 23984 |
} loop |
| 23985 |
DrawnSegm 0 gt currentdict /fillBeam known and { |
| 23986 |
fillBeam newpath |
| 23987 |
/DrawnSegm 0 def |
| 23988 |
} if |
| 23989 |
ret missed eq not { |
| 23990 |
% \end{macrocode} |
| 23991 |
% Check if Up and Low must be swapped for next beam. This depends both |
| 23992 |
% on the relative orientation (chirality) of the incoming beam vector |
| 23993 |
% and the vector between the two intersection points CurrUp and CurrLow, |
| 23994 |
% and the direction of the beam vector. |
| 23995 |
% |
| 23996 |
% The intersection points are swapped if the angle of the beam vector is |
| 23997 |
% between $90°+\epsilon$ and $-90°+\epsilon$ and the chirality is |
| 23998 |
% positive, or if the beam vector points to the right, positive |
| 23999 |
% half-circle and the chirality is negative. The $\epsilon$ is |
| 24000 |
% introduced to get the correct order for $\pm 90°$ despite numerical |
| 24001 |
% errors. |
| 24002 |
% \begin{macrocode} |
| 24003 |
CurrLow CurrUp @ABVect % from Low to Up |
| 24004 |
PrevVecUp PrevVecLow VecAdd |
| 24005 |
2 copy 6 2 roll |
| 24006 |
Chirality 0 lt |
| 24007 |
3 1 roll 2 copy pop -1e-5 lt |
| 24008 |
3 1 roll exch 1e-5 lt exch 0 lt and or xor { |
| 24009 |
% \end{macrocode} |
| 24010 |
% swap upper and lower beam points for next beam |
| 24011 |
% \begin{macrocode} |
| 24012 |
/lastBeamPointTmpUp /CurrLow load def |
| 24013 |
/lastBeamPointTmpLow /CurrUp load def |
| 24014 |
/lastVecTmpUp /CurrVecLow load def |
| 24015 |
/lastVecTmpLow /CurrVecUp load def |
| 24016 |
} { |
| 24017 |
/lastBeamPointTmpLow /CurrLow load def |
| 24018 |
/lastBeamPointTmpUp /CurrUp load def |
| 24019 |
/lastVecTmpUp /CurrVecUp load def |
| 24020 |
/lastVecTmpLow /CurrVecLow load def |
| 24021 |
} ifelse |
| 24022 |
/lastVecTmpUp load /lastVecTmpLow load |
| 24023 |
/prevVecLow ED /prevVecUp ED |
| 24024 |
} if |
| 24025 |
DebugEnd |
| 24026 |
} bind def |
| 24027 |
% \end{macrocode} |
| 24028 |
% \end{macro} |
| 24029 |
% |
| 24030 |
% \begin{macro}{DrawbeamPrepare} |
| 24031 |
% Prepare the data points for drawing with \PSop{DrawbeamSimple} and |
| 24032 |
% \PSop{DrawbeamArrowInside}. |
| 24033 |
% \begin{macrocode} |
| 24034 |
/DrawbeamPrepare { |
| 24035 |
% \end{macrocode} |
| 24036 |
% Remove trailing empty line parts. |
| 24037 |
% \begin{macrocode} |
| 24038 |
{ |
| 24039 |
counttomark 6 le { exit } if |
| 24040 |
3 index not { pop pop pop }{ exit } ifelse |
| 24041 |
} loop |
| 24042 |
% \end{macrocode} |
| 24043 |
% Remove heading empty line parts. Note, that the first point must not have |
| 24044 |
% 'draw = true', because it is the starting point which we have to move to. |
| 24045 |
% \begin{macrocode} |
| 24046 |
{ |
| 24047 |
counttomark 3 le { exit } if |
| 24048 |
counttomark 3 sub index not { |
| 24049 |
counttomark -3 roll pop pop pop |
| 24050 |
}{ |
| 24051 |
exit |
| 24052 |
} ifelse |
| 24053 |
} loop |
| 24054 |
} bind def |
| 24055 |
% \end{macrocode} |
| 24056 |
% \end{macro} |
| 24057 |
% |
| 24058 |
% \begin{macro}{DrawbeamSimple} |
| 24059 |
% \begin{macrocode} |
| 24060 |
/DrawbeamSimple { |
| 24061 |
pop 5 copy 3 -1 roll pop |
| 24062 |
ArrowA pop pop pop pop |
| 24063 |
counttomark 3 idiv -1 2 { |
| 24064 |
pop { |
| 24065 |
lineto |
| 24066 |
}{ |
| 24067 |
moveto |
| 24068 |
} ifelse |
| 24069 |
} for |
| 24070 |
{CP 4 2 roll ArrowB lineto pop pop } {moveto} ifelse |
| 24071 |
} bind def |
| 24072 |
% \end{macrocode} |
| 24073 |
% \end{macro} |
| 24074 |
% |
| 24075 |
% \begin{macro}{DrawbeamArrowInside} |
| 24076 |
% This is the /Line definition from \opt{pstricks-add}, adapted to the beam path |
| 24077 |
% structure which includes the boolean values to indicate if a line is drawn, or |
| 24078 |
% if we use moveto. There was no way to patch the original definition to account |
| 24079 |
% for the moveto parts and avoid duplicating the code. |
| 24080 |
% \begin{macrocode} |
| 24081 |
/DrawbeamArrowInside { |
| 24082 |
6 copy pop |
| 24083 |
/y1 ED /x1 ED pop /y2 ED /x2 ED |
| 24084 |
/Alpha y2 y1 sub x2 x1 sub Atan def |
| 24085 |
pop 3 -1 roll 5 1 roll |
| 24086 |
ArrowA |
| 24087 |
% \end{macrocode} |
| 24088 |
% dx add, and dy add, to get the current point at the end of the arrow tip. |
| 24089 |
% \begin{macrocode} |
| 24090 |
x1 Alpha cos arrowlength mul add |
| 24091 |
y1 Alpha sin arrowlength mul add |
| 24092 |
5 -1 roll 3 1 roll true |
| 24093 |
/N N 1 sub def |
| 24094 |
N { |
| 24095 |
6 copy pop |
| 24096 |
/y1 ED /x1 ED pop /y2 ED /x2 ED /draw ED |
| 24097 |
% \end{macrocode} |
| 24098 |
% Check for line segment length and draw the arrow only, if the segment is long |
| 24099 |
% enough. This is in first place to avoid drawing an inside arrow for the |
| 24100 |
% pinhole which has three interfaces instead of one so that it can be used as |
| 24101 |
% real spatial filter. |
| 24102 |
% \begin{macrocode} |
| 24103 |
x1 y1 x2 y2 @ABDist dup |
| 24104 |
arrowminlength ge |
| 24105 |
exch arrowmaxlength dup 0 lt |
| 24106 |
3 1 roll le or and { |
| 24107 |
x1 y1 |
| 24108 |
arrowpos 1 gt { |
| 24109 |
/Alpha y2 y1 sub x2 x1 sub Atan def |
| 24110 |
/dArrowPos dArrowPosStart abs def |
| 24111 |
/ArrowPos ArrowPosStart def |
| 24112 |
arrowno { |
| 24113 |
/ArrowPos ArrowPos dArrowPos add def |
| 24114 |
x1 Alpha cos ArrowPos mul add |
| 24115 |
y1 Alpha sin ArrowPos mul add |
| 24116 |
6 index { ArrowInside } if |
| 24117 |
pop pop |
| 24118 |
} repeat |
| 24119 |
}{ |
| 24120 |
arrowno 1 gt { |
| 24121 |
1.0 arrowno 1.0 add div |
| 24122 |
}{ |
| 24123 |
dArrowPosStart |
| 24124 |
} ifelse /dArrowPos ED |
| 24125 |
/ArrowPos ArrowPosStart def |
| 24126 |
arrowno { |
| 24127 |
/ArrowPos ArrowPos dArrowPos add def |
| 24128 |
x2 x1 sub ArrowPos mul x1 add |
| 24129 |
y2 y1 sub ArrowPos mul y1 add |
| 24130 |
6 index { ArrowInside } if |
| 24131 |
pop pop |
| 24132 |
} repeat |
| 24133 |
} ifelse |
| 24134 |
pop pop |
| 24135 |
} if |
| 24136 |
draw {Lineto}{moveto} ifelse |
| 24137 |
} repeat |
| 24138 |
{CP 4 2 roll ArrowB lineto pop pop } {moveto} ifelse |
| 24139 |
} bind def |
| 24140 |
% \end{macrocode} |
| 24141 |
% \end{macro} |
| 24142 |
% |
| 24143 |
% \begin{macro}{isAmbiguous} |
| 24144 |
% Check if \PSvar{compname} is ambiguous, i.e. if it can have alternating beam |
| 24145 |
% paths depending on the input and output plane (e.g. beamsplitter can either |
| 24146 |
% transmit or reflect a beam). |
| 24147 |
% \begin{pssyntax} |
| 24148 |
% \PSstring{compname} \PSop{isAmbiguous} \PSvar{boolean} |
| 24149 |
% \end{pssyntax} |
| 24150 |
% \begin{macrocode} |
| 24151 |
/isAmbiguous { |
| 24152 |
cvn load dup /ambiguous known { |
| 24153 |
/ambiguous get |
| 24154 |
} { |
| 24155 |
pop false |
| 24156 |
} ifelse |
| 24157 |
} bind def |
| 24158 |
% \end{macrocode} |
| 24159 |
% \end{macro} |
| 24160 |
% |
| 24161 |
% \begin{macro}{isAmbiguousIfc} |
| 24162 |
% Check if interface \PSvar{IfcNum} is the ambiguous interface of \PSvar{compname}. |
| 24163 |
% \begin{pssyntax} |
| 24164 |
% \PSvar{IfcNum} \PSstring{compname} \PSop{isAmbiguousIfc} \PSvar{boolean} |
| 24165 |
% \end{pssyntax} |
| 24166 |
% \begin{macrocode} |
| 24167 |
/isAmbiguousIfc { |
| 24168 |
cvn load dup /ambiguous known { |
| 24169 |
/ambIfc get eq |
| 24170 |
} { |
| 24171 |
pop pop false |
| 24172 |
} ifelse |
| 24173 |
} bind def |
| 24174 |
% \end{macrocode} |
| 24175 |
% \end{macro} |
| 24176 |
% |
| 24177 |
% \begin{macro}{isCurvedIfc} |
| 24178 |
% Check if interface \PSvar{IfcNum} of componente \PSvar{compname} is curved. |
| 24179 |
% \begin{pssyntax} |
| 24180 |
% \PSvar{IfcNum} \PSstring{compname} \PSop{isCurvedIfc} \PSvar{bool} |
| 24181 |
% \end{pssyntax} |
| 24182 |
% \begin{macrocode} |
| 24183 |
/isCurvedIfc { |
| 24184 |
cvn load begin |
| 24185 |
IfcName load /RX known |
| 24186 |
end |
| 24187 |
} bind def |
| 24188 |
% \end{macrocode} |
| 24189 |
% \end{macro} |
| 24190 |
% |
| 24191 |
% \begin{macro}{isPathIfc} |
| 24192 |
% Check if interface \PSvar{IfcNum} of componente \PSvar{compname} is an arbitrary path. |
| 24193 |
% \begin{pssyntax} |
| 24194 |
% \PSvar{IfcNum} \PSstring{compname} \PSop{isPathIfc} \PSvar{bool} |
| 24195 |
% \end{pssyntax} |
| 24196 |
% \begin{macrocode} |
| 24197 |
/isPathIfc { |
| 24198 |
cvn load begin |
| 24199 |
IfcName load /Path known |
| 24200 |
end |
| 24201 |
} bind def |
| 24202 |
% \end{macrocode} |
| 24203 |
% \end{macro} |
| 24204 |
% |
| 24205 |
% \begin{macro}{HandleInterface} |
| 24206 |
% \begin{pssyntax} |
| 24207 |
% \PSvar{IfcNum} \PSstring{CompName} \PSvar{mode n2 X0 Y0 Xin Yin} |
| 24208 |
% \PSop{HandleInterface} |
| 24209 |
% \PSvar{X0' Y0' Xout Yout status} |
| 24210 |
% \end{pssyntax} |
| 24211 |
% \begin{macrocode} |
| 24212 |
/HandleInterface { |
| 24213 |
(HandleInterface) DebugBegin |
| 24214 |
/Yin ED /Xin ED /Y0 ED /X0 ED /n2 ED /mode ED |
| 24215 |
currentdict /isectT undef currentdict /isectPath undef |
| 24216 |
2 copy 2 copy LoadIfc % IfcNum name IfcNum name path |
| 24217 |
dup type /arraytype eq { % is an path interface |
| 24218 |
dup /isectPath exch def |
| 24219 |
3 1 roll pop pop PathInterface % IfcNum name t X0' Y0' Xout Yout status |
| 24220 |
dup missed eq not { 6 -1 roll /isectT exch def } if |
| 24221 |
} { |
| 24222 |
6 -2 roll |
| 24223 |
isCurvedIfc { CurvedInterface }{ PlainInterface } ifelse |
| 24224 |
} ifelse |
| 24225 |
% \end{macrocode} |
| 24226 |
% IfcNum CompName X0' Y0' Xout Yout status |
| 24227 |
% |
| 24228 |
% Check if X0' Y0' are within the numerical aperture of the interface |
| 24229 |
% \begin{macrocode} |
| 24230 |
dup missed eq not useNA connectifc not and and { |
| 24231 |
7 3 roll 2 copy 9 2 roll |
| 24232 |
4 2 roll 2 copy |
| 24233 |
%% X0' Y0' Xout Yout status X0' Y0' IfcNum CompName IfcNum CompName |
| 24234 |
cvn load begin IfcName load dup /NAlow get exch /NAup get end |
| 24235 |
2 copy lt { |
| 24236 |
4 2 roll 2 copy LoadIfc NormalizeVec |
| 24237 |
6 -2 roll isCurvedIfc { |
| 24238 |
neg exch |
| 24239 |
} if |
| 24240 |
%% ... X0' Y0' NAlow NAup X Y dXp dYp |
| 24241 |
8 -2 roll 6 -2 roll |
| 24242 |
%% ... NAlow NAup dXp dYp X0' Y0' X Y |
| 24243 |
@ABVect DotProd |
| 24244 |
dup 4 -1 roll ge 3 1 roll ge and not |
| 24245 |
{ |
| 24246 |
pop missed |
| 24247 |
} if |
| 24248 |
}{ |
| 24249 |
6 {pop} repeat |
| 24250 |
} ifelse |
| 24251 |
} { |
| 24252 |
7 -2 roll pop pop |
| 24253 |
} ifelse |
| 24254 |
DebugEnd |
| 24255 |
} bind def |
| 24256 |
% \end{macrocode} |
| 24257 |
% \end{macro} |
| 24258 |
% |
| 24259 |
% \begin{macro}{LoadIfc} |
| 24260 |
% \begin{pssyntax} |
| 24261 |
% \PSvar{IfcNum} \PSstring{CompName} \PSop{LoadIfc} \PSvar{X Y} \PSvar{dX|RY dY|RY} |
| 24262 |
% \end{pssyntax} |
| 24263 |
% \begin{macrocode} |
| 24264 |
/LoadIfc { |
| 24265 |
(LoadIfc) DebugBegin |
| 24266 |
cvn load begin |
| 24267 |
IfcName load begin |
| 24268 |
currentdict /Path known { |
| 24269 |
Path TransformPath |
| 24270 |
} { |
| 24271 |
X Y |
| 24272 |
CompMtrx transform CM itransform |
| 24273 |
currentdict /RX known { RX RY }{ DX DY } ifelse |
| 24274 |
CompMtrx dtransform CM idtransform |
| 24275 |
} ifelse |
| 24276 |
end |
| 24277 |
end |
| 24278 |
DebugEnd |
| 24279 |
} bind def |
| 24280 |
% \end{macrocode} |
| 24281 |
% \end{macro} |
| 24282 |
% |
| 24283 |
% \begin{macro}{isFreeray} |
| 24284 |
% Check if \PSvar{compname} is a free-ray componente by checking if there is a |
| 24285 |
% refractive index associated with it. |
| 24286 |
% \begin{pssyntax} |
| 24287 |
% \PSstring{compname} \PSop{isFreeray} \PSvar{boolean} |
| 24288 |
% \end{pssyntax} |
| 24289 |
% \begin{macrocode} |
| 24290 |
/isFreeray { |
| 24291 |
cvn load /n known |
| 24292 |
} bind def |
| 24293 |
% \end{macrocode} |
| 24294 |
% \end{macro} |
| 24295 |
% |
| 24296 |
% \begin{macro}{/compIsKnown} |
| 24297 |
% Check if a component is known. |
| 24298 |
% \begin{macrocode} |
| 24299 |
/compIsKnown { |
| 24300 |
dup type /stringtype eq { cvn } if |
| 24301 |
tx@OptexpDict exch known |
| 24302 |
} bind def |
| 24303 |
% \end{macrocode} |
| 24304 |
% \end{macro} |
| 24305 |
% |
| 24306 |
% \begin{macro}{PrearrangePlanes} |
| 24307 |
% \begin{pssyntax} |
| 24308 |
% \PSvar{[} \PSstring{CompN} \PSvar{\ldots} \PSvar{Comp1} \PSop{PrearrangePlanes}\\ |
| 24309 |
% \PSvar{[} \PSvar{desc|asc} \PSstring{CompN} \PSvar{\ldots} \PSvar{desc|asc} \PSstring{Comp1} |
| 24310 |
% \end{pssyntax} |
| 24311 |
% \begin{macrocode} |
| 24312 |
/PrearrangePlanes { |
| 24313 |
(PrearrangePlanes) DebugBegin |
| 24314 |
counttomark dup 2 lt { |
| 24315 |
dup 0 eq { |
| 24316 |
(Found no component on stack, drawing no beam) PrintWarning |
| 24317 |
}{ |
| 24318 |
% \end{macrocode} |
| 24319 |
% Only one component, draw always in ascending order. We must still |
| 24320 |
% check in /PushAllPlanesOnStack if the component has only one |
| 24321 |
% interface. |
| 24322 |
% \begin{macrocode} |
| 24323 |
exch dup |
| 24324 |
compIsKnown { |
| 24325 |
dup isFreeray { |
| 24326 |
asc exch 3 -1 roll |
| 24327 |
}{ |
| 24328 |
OneFiberCompWarning |
| 24329 |
pop |
| 24330 |
} ifelse |
| 24331 |
}{ |
| 24332 |
CompUnknownWarning |
| 24333 |
} ifelse |
| 24334 |
} ifelse |
| 24335 |
/N 0 def |
| 24336 |
}{ |
| 24337 |
% \end{macrocode} |
| 24338 |
% We have a minimum of two components on stack |
| 24339 |
% \begin{macrocode} |
| 24340 |
/N ED |
| 24341 |
/CompA ED dup /CompB ED |
| 24342 |
% \end{macrocode} |
| 24343 |
% Check, if the components have been defined |
| 24344 |
% \begin{macrocode} |
| 24345 |
CompA compIsKnown CompB compIsKnown and { |
| 24346 |
CompA isFreeray { |
| 24347 |
CompA isAmbiguous { |
| 24348 |
amb dup CompA |
| 24349 |
} { |
| 24350 |
CompB isAmbiguous { |
| 24351 |
1 CompA GetIfcCenter (C) CompB GetIfcCenter @ABDist |
| 24352 |
(N) CompA GetIfcCenter (C) CompB GetIfcCenter @ABDist |
| 24353 |
} { |
| 24354 |
1 CompA GetIfcCenter |
| 24355 |
1 CompB GetIfcCenter |
| 24356 |
(N) CompB GetIfcCenter |
| 24357 |
true OrderNodes exch pop |
| 24358 |
(N) CompA GetIfcCenter |
| 24359 |
1 CompB GetIfcCenter |
| 24360 |
(N) CompB GetIfcCenter |
| 24361 |
true OrderNodes exch pop |
| 24362 |
} ifelse |
| 24363 |
le { desc } { asc } ifelse dup CompA |
| 24364 |
} ifelse |
| 24365 |
counttomark 2 roll |
| 24366 |
}{ |
| 24367 |
FiberCompWarning |
| 24368 |
counttomark 1 sub { pop } repeat |
| 24369 |
/N 0 def |
| 24370 |
} ifelse |
| 24371 |
}{ |
| 24372 |
% \end{macrocode} |
| 24373 |
% One of the first two components was not defined, do not draw any beam |
| 24374 |
% \begin{macrocode} |
| 24375 |
/N 0 def |
| 24376 |
CompA compIsKnown not {CompA}{CompB} ifelse |
| 24377 |
CompUnknownWarning |
| 24378 |
} ifelse |
| 24379 |
} ifelse |
| 24380 |
2 1 N { |
| 24381 |
/i ED exch /CompB ED |
| 24382 |
CompB compIsKnown not { |
| 24383 |
counttomark i 1 sub 2 mul 1 add sub { pop } repeat |
| 24384 |
CompB CompUnknownWarning |
| 24385 |
exit |
| 24386 |
} if |
| 24387 |
CompB isFreeray not { |
| 24388 |
counttomark i 1 sub 2 mul 1 add sub { pop } repeat |
| 24389 |
FiberCompWarning |
| 24390 |
exit |
| 24391 |
} if |
| 24392 |
CompB isAmbiguous not { |
| 24393 |
dup desc eq { 1 } { dup amb eq { (C) }{ (N) } ifelse } ifelse |
| 24394 |
CompA GetIfcCenter |
| 24395 |
1 CompB GetIfcCenter |
| 24396 |
(N) CompB GetIfcCenter false OrderNodes dup dup |
| 24397 |
% \end{macrocode} |
| 24398 |
% check if we have a NodeIfc |
| 24399 |
% \begin{macrocode} |
| 24400 |
4 -1 roll CompA exch 5 -1 roll CompB exch |
| 24401 |
i 2 eq { |
| 24402 |
% \end{macrocode} |
| 24403 |
% check also the first plane |
| 24404 |
% \begin{macrocode} |
| 24405 |
4 copy 4 2 roll AdjustRelRot |
| 24406 |
} if |
| 24407 |
AdjustRelRot |
| 24408 |
} { |
| 24409 |
% \end{macrocode} |
| 24410 |
% check if the first plane is an NodeIfc and correct its rotation, the |
| 24411 |
% node ordering in CompA is irrelevant at this point, so we use desc. |
| 24412 |
% \begin{macrocode} |
| 24413 |
i 2 eq { |
| 24414 |
CompB amb CompA desc AdjustRelRot |
| 24415 |
} if |
| 24416 |
pop amb dup |
| 24417 |
} ifelse |
| 24418 |
CompB /CompA CompB def |
| 24419 |
counttomark 2 roll |
| 24420 |
} for pop |
| 24421 |
DebugEnd |
| 24422 |
} bind def |
| 24423 |
% \end{macrocode} |
| 24424 |
% \end{macro} |
| 24425 |
% |
| 24426 |
% \begin{macro}{AdjustRelRot} |
| 24427 |
% Adjusts the relative orientation of \PSstring{CompB} based on the |
| 24428 |
% relative connection between \PSstring{CompA} and |
| 24429 |
% \PSstring{CompB}. This is only done for ``node interfaces'', which |
| 24430 |
% are created automatically when drawing beams through nodes. |
| 24431 |
% \begin{pssyntax} |
| 24432 |
% \PSstring{CompA} \PSvar{desc|asc} \PSstring{CompB} \PSvar{desc|asc} \PSop{AdjustRelRot} |
| 24433 |
% \end{pssyntax} |
| 24434 |
% \begin{macrocode} |
| 24435 |
/AdjustRelRot { |
| 24436 |
(AdjustRelRot) DebugBegin |
| 24437 |
exch dup cvn load /adjustRel known aligntovector not and { |
| 24438 |
dup dup 4 2 roll isAmbiguous { |
| 24439 |
exch pop (C) |
| 24440 |
}{ |
| 24441 |
desc eq { (N) }{ 1 } ifelse |
| 24442 |
} ifelse |
| 24443 |
exch GetIfcCenter 5 3 roll |
| 24444 |
exch dup 3 1 roll isAmbiguous { |
| 24445 |
pop (C) |
| 24446 |
}{ |
| 24447 |
desc eq { 1 }{ (N) } ifelse |
| 24448 |
} ifelse |
| 24449 |
exch GetIfcCenter |
| 24450 |
@ABVect exch atan exch |
| 24451 |
cvn load begin |
| 24452 |
adjustRel { |
| 24453 |
matrix rotate CompMtrx matrix concatmatrix /CompMtrx ED |
| 24454 |
/adjustRel false def |
| 24455 |
} { |
| 24456 |
pop |
| 24457 |
} ifelse |
| 24458 |
end |
| 24459 |
} { |
| 24460 |
pop pop pop pop |
| 24461 |
} ifelse |
| 24462 |
DebugEnd |
| 24463 |
} bind def |
| 24464 |
% \end{macrocode} |
| 24465 |
% \end{macro} |
| 24466 |
% |
| 24467 |
% \begin{macro}{PushAllPlanesOnStack} |
| 24468 |
% \begin{pssyntax} |
| 24469 |
% \PSvar{[} \PSvar{desc|asc} \PSstring{CompN} \PSvar{\ldots} \PSvar{desc|asc} \PSstring{Comp1} |
| 24470 |
% \PSop{PushAllPlanesOnStack} |
| 24471 |
% \PSvar{[} \PSproc{PN \PSstring{CompName} n mode draw?} \PSvar{\ldots{}} |
| 24472 |
% \end{pssyntax} |
| 24473 |
% \begin{psarglist} |
| 24474 |
% \psargitem{PN} The number of the plane of the component \PSstring{CompNameN}, can be an integer or a string. |
| 24475 |
% \psargitem{CompName} The name of the component which the interface \PSvar{PN} belongs to. |
| 24476 |
% \psargitem{n} The refractive index after the respective interface. |
| 24477 |
% \psargitem{mode} Specifies if the interface is transmittive (\PSvar{trans}) or reflective (\PSvar{refl}). |
| 24478 |
% \psargitem{draw?} Specifies if the connection to this interface should be drawn or if the current point is only moved. |
| 24479 |
% \end{psarglist} |
| 24480 |
% \begin{macrocode} |
| 24481 |
/PushAllPlanesOnStack { |
| 24482 |
(PushAllPlanesOnStack) DebugBegin |
| 24483 |
counttomark 2 div cvi /@N ED |
| 24484 |
1 1 @N { |
| 24485 |
% \end{macrocode} |
| 24486 |
% iterate over all components |
| 24487 |
% \begin{macrocode} |
| 24488 |
/last false def |
| 24489 |
/first false def |
| 24490 |
dup 1 eq { |
| 24491 |
/first true def pop beaminsidefirst |
| 24492 |
} { |
| 24493 |
@N eq { |
| 24494 |
beaminsidelast |
| 24495 |
/last true def |
| 24496 |
} { |
| 24497 |
beaminside |
| 24498 |
} ifelse |
| 24499 |
} ifelse |
| 24500 |
exch load dup dup |
| 24501 |
/forcebeaminside get { |
| 24502 |
3 -1 roll pop true |
| 24503 |
} { |
| 24504 |
dup /allowbeaminside get 4 -1 roll and |
| 24505 |
} ifelse |
| 24506 |
/drawinside ED |
| 24507 |
/ambiguous get { |
| 24508 |
/name get drawinside [ 3 1 roll ] |
| 24509 |
counttomark 1 roll pop |
| 24510 |
} { |
| 24511 |
begin |
| 24512 |
% \end{macrocode} |
| 24513 |
% Start of the component dict. |
| 24514 |
% \begin{macrocode} |
| 24515 |
desc eq { |
| 24516 |
N N -1 1 1 |
| 24517 |
} { |
| 24518 |
1 1 1 N N |
| 24519 |
} ifelse |
| 24520 |
first { |
| 24521 |
startinside not { |
| 24522 |
% \end{macrocode} |
| 24523 |
% first comp and we do not start inside |
| 24524 |
% \begin{macrocode} |
| 24525 |
5 -2 roll |
| 24526 |
pop pop |
| 24527 |
2 copy 5 2 roll |
| 24528 |
} { |
| 24529 |
startinsidecount 0 gt N startinsidecount sub 1 gt and { |
| 24530 |
% \end{macrocode} |
| 24531 |
% we do not use all segments of the first component |
| 24532 |
% \begin{macrocode} |
| 24533 |
3 -1 roll dup 4 1 roll |
| 24534 |
N 1 sub startinsidecount sub mul |
| 24535 |
6 -2 roll pop add dup 5 2 roll |
| 24536 |
} if |
| 24537 |
} ifelse |
| 24538 |
} if |
| 24539 |
last stopinsidecount 0 gt N stopinsidecount sub 1 gt and and { |
| 24540 |
% 1 1 1 N N |
| 24541 |
3 -1 roll dup 4 1 roll stopinsidecount mul |
| 24542 |
6 -1 roll dup 7 1 roll add 3 1 roll pop pop dup |
| 24543 |
} if |
| 24544 |
5 1 roll |
| 24545 |
{ |
| 24546 |
% \end{macrocode} |
| 24547 |
% iterate over all planes |
| 24548 |
% \begin{macrocode} |
| 24549 |
3 1 roll 2 copy 5 -1 roll |
| 24550 |
dup 3 1 roll |
| 24551 |
eq first not and { |
| 24552 |
% \end{macrocode} |
| 24553 |
% always draw the line to the first plane of a component |
| 24554 |
% \begin{macrocode} |
| 24555 |
true |
| 24556 |
} { |
| 24557 |
% \end{macrocode} |
| 24558 |
% the other beams depend on some options |
| 24559 |
% \begin{macrocode} |
| 24560 |
drawinside |
| 24561 |
} ifelse |
| 24562 |
exch dup 4 -1 roll eq { |
| 24563 |
% \end{macrocode} |
| 24564 |
% after the last component plane we have always air |
| 24565 |
% \begin{macrocode} |
| 24566 |
bgRefIndex |
| 24567 |
}{ |
| 24568 |
% \end{macrocode} |
| 24569 |
% otherwise the respective refractive index of the component |
| 24570 |
% \begin{macrocode} |
| 24571 |
name GetRefIndex |
| 24572 |
} ifelse |
| 24573 |
exch inttostr exch |
| 24574 |
3 1 roll name |
| 24575 |
4 1 roll |
| 24576 |
dup IfcName load /mode get |
| 24577 |
3 1 roll 5 1 roll |
| 24578 |
[ 6 1 roll ] cvx counttomark 1 roll |
| 24579 |
last { |
| 24580 |
savebeampoints 1 ge stopinside not and |
| 24581 |
savebeampoints 1 lt beaminsidelast not and or { |
| 24582 |
exit |
| 24583 |
} if |
| 24584 |
} if |
| 24585 |
} for pop pop |
| 24586 |
end |
| 24587 |
} ifelse |
| 24588 |
} for |
| 24589 |
DebugEnd |
| 24590 |
counttomark 1 eq { pop } if |
| 24591 |
} bind def |
| 24592 |
% \end{macrocode} |
| 24593 |
% \end{macro} |
| 24594 |
% |
| 24595 |
% \begin{macro}{IfcName} |
| 24596 |
% Construct the interface name from \PSvar{num}. |
| 24597 |
% \begin{pssyntax} |
| 24598 |
% \PSvar{num} \PSop{IfcName} \PSname{P@num} |
| 24599 |
% \end{pssyntax} |
| 24600 |
% \begin{macrocode} |
| 24601 |
/IfcName { |
| 24602 |
inttostr (P@) exch strcat cvn |
| 24603 |
} bind def |
| 24604 |
% \end{macrocode} |
| 24605 |
% \end{macro} |
| 24606 |
% |
| 24607 |
% \begin{macro}{GetIfcMode} |
| 24608 |
% \begin{pssyntax} |
| 24609 |
% \PSstring{name} \PSvar{num} \PSop{GetIfcMode} \PSvar{mode} |
| 24610 |
% \end{pssyntax} |
| 24611 |
% \begin{macrocode} |
| 24612 |
/GetIfcMode { |
| 24613 |
exch cvn load begin |
| 24614 |
IfcName load /mode get |
| 24615 |
end |
| 24616 |
} bind def |
| 24617 |
% \end{macrocode} |
| 24618 |
% \end{macro} |
| 24619 |
% \begin{macro}{NodeName} |
| 24620 |
% Construct the node name from a string or number. |
| 24621 |
% \begin{pssyntax} |
| 24622 |
% \PSstring{name} \PSvar{num} \PSop{NodeName} \PSname{N@namenum} |
| 24623 |
% \end{pssyntax} |
| 24624 |
% \begin{macrocode} |
| 24625 |
/NodeName { |
| 24626 |
dup /stringtype eq not { inttostr } if |
| 24627 |
strcat (N@) exch strcat cvn |
| 24628 |
} bind def |
| 24629 |
% \end{macrocode} |
| 24630 |
% \end{macro} |
| 24631 |
% |
| 24632 |
% \begin{macro}{OrderNodes} |
| 24633 |
% Check if node (\PSvar{XB1}, \PSvar{YB1}) or (\PSvar{XBN}, \PSvar{YBN}) is nearer to node (\PSvar{XA}, \PSvar{YA}). If it |
| 24634 |
% \PSvar{B1} is nearer, push \PSvar{asc} on the stack, otherwise |
| 24635 |
% \PSvar{desc}. If \PSvar{calcDist} is \opt{true} it leaves also the actual |
| 24636 |
% smallest distance on the stack. |
| 24637 |
% \begin{pssyntax} |
| 24638 |
% \PSvar{XA YA XB1 YB1 XBN YBN calcDist} \PSop{OrderNodes} \PSvar{desc|asc} \PSvar{distance} |
| 24639 |
% \end{pssyntax} |
| 24640 |
% \begin{macrocode} |
| 24641 |
/OrderNodes { |
| 24642 |
7 1 roll 6 -2 roll 2 copy 8 2 roll |
| 24643 |
@ABDist 5 1 roll @ABDist 2 copy gt { |
| 24644 |
pop asc exch |
| 24645 |
} { |
| 24646 |
exch pop desc exch |
| 24647 |
} ifelse |
| 24648 |
3 -1 roll not { |
| 24649 |
pop |
| 24650 |
} if |
| 24651 |
} bind def |
| 24652 |
% \end{macrocode} |
| 24653 |
% \end{macro} |
| 24654 |
% |
| 24655 |
% \begin{macro}{NormalVec} |
| 24656 |
% Construct a normal vector $\vec{n}$ to the plane such that its |
| 24657 |
% scalar product with the incomping wave vector $\vec{v}_\text{in}$ is |
| 24658 |
% negative: $\vec{n}\cdot (-\vec{v}_\text{in}) > 0$. |
| 24659 |
% \begin{pssyntax} |
| 24660 |
% \PSvar{Xin Yin Xplane Yplane} \PSop{NormalVec} \PSvar{Xnorm Ynorm} |
| 24661 |
% \end{pssyntax} |
| 24662 |
% \begin{macrocode} |
| 24663 |
/NormalVec { |
| 24664 |
neg exch 2 copy 6 2 roll DotProd 0 gt { |
| 24665 |
-1 mul exch -1 mul exch |
| 24666 |
} if |
| 24667 |
NormalizeVec |
| 24668 |
} bind def |
| 24669 |
% \end{macrocode} |
| 24670 |
% \end{macro} |
| 24671 |
% |
| 24672 |
% \begin{macro}{DotProd} |
| 24673 |
% Scalar product between two vectors. |
| 24674 |
% \begin{pssyntax} |
| 24675 |
% \PSvar{Xa Ya Xb Yb} \PSop{DotProd} \PSvar{val} |
| 24676 |
% \end{pssyntax} |
| 24677 |
% \begin{macrocode} |
| 24678 |
/DotProd { |
| 24679 |
3 -1 roll mul 3 1 roll mul add |
| 24680 |
} bind def |
| 24681 |
% \end{macrocode} |
| 24682 |
% \end{macro} |
| 24683 |
% |
| 24684 |
% \begin{macro}{VecAngle} |
| 24685 |
% Angle between two vectors $\cos(\alpha) = \frac{ab}{|a||b|}$ |
| 24686 |
% \begin{pssyntax} |
| 24687 |
% \PSvar{Xa Ya Xb Yb} \PSop{VecAngle} \PSvar{angle} |
| 24688 |
% \end{pssyntax} |
| 24689 |
% \begin{macrocode} |
| 24690 |
/VecAngle { |
| 24691 |
4 copy 4 copy DotProd 5 1 roll |
| 24692 |
tx@Dict begin |
| 24693 |
Pyth 3 1 roll Pyth |
| 24694 |
end mul |
| 24695 |
div Acos |
| 24696 |
5 2 roll mul 4 1 roll 3 -1 roll mul 3 -1 roll sub |
| 24697 |
0 le { -1 }{ 1 } ifelse mul |
| 24698 |
} bind def |
| 24699 |
% \end{macrocode} |
| 24700 |
% \end{macro} |
| 24701 |
% |
| 24702 |
% \begin{macro}{VecAdd} |
| 24703 |
% Addition of two vectors. |
| 24704 |
% \begin{pssyntax} |
| 24705 |
% \PSvar{Xa Ya Xb Yb} \PSop{VecAdd} \PSvar{Xa+Xb Ya+Yb} |
| 24706 |
% \end{pssyntax} |
| 24707 |
% \begin{macrocode} |
| 24708 |
/VecAdd { |
| 24709 |
3 -1 roll add 3 1 roll add exch |
| 24710 |
} bind def |
| 24711 |
% \end{macrocode} |
| 24712 |
% \end{macro} |
| 24713 |
% |
| 24714 |
% \begin{macro}{VecSub} |
| 24715 |
% Subtraction of two vectors. |
| 24716 |
% \begin{pssyntax} |
| 24717 |
% \PSvar{Xa Ya Xb Yb} \PSop{VecSub} \PSvar{Xa-Xb Ya-Yb} |
| 24718 |
% \end{pssyntax} |
| 24719 |
% \begin{macrocode} |
| 24720 |
/VecSub { |
| 24721 |
neg 3 -1 roll add 3 1 roll neg add exch |
| 24722 |
} bind def |
| 24723 |
% \end{macrocode} |
| 24724 |
% \end{macro} |
| 24725 |
% |
| 24726 |
% \begin{macro}{VecScale} |
| 24727 |
% Scale a vector by a factor \PSvar{fac}. |
| 24728 |
% \begin{pssyntax} |
| 24729 |
% \PSvar{Xa Ya fac} \PSop{VecScale} \PSvar{fac}$\cdot$\PSvar{Xa} \PSvar{fac}$\cdot$\PSvar{Ya} |
| 24730 |
% \end{pssyntax} |
| 24731 |
% \begin{macrocode} |
| 24732 |
/VecScale { |
| 24733 |
dup 4 -1 roll mul 3 1 roll mul |
| 24734 |
} bind def |
| 24735 |
% \end{macrocode} |
| 24736 |
% \end{macro} |
| 24737 |
% |
| 24738 |
% \begin{macro}{ToVec} |
| 24739 |
% Convert two numbers to a procedure holding the two values. This |
| 24740 |
% representation is used to save coordinate values of nodes and vectors. |
| 24741 |
% \begin{pssyntax} |
| 24742 |
% \PSvar{X Y} \PSop{ToVec} \PSproc{X Y} |
| 24743 |
% \end{pssyntax} |
| 24744 |
% \begin{macrocode} |
| 24745 |
/ToVec { |
| 24746 |
ToPnt cvx |
| 24747 |
} bind def |
| 24748 |
% \end{macrocode} |
| 24749 |
% \end{macro} |
| 24750 |
% |
| 24751 |
% \begin{macro}{ToPnt} |
| 24752 |
% Convert two numbers to an array holding the two values. |
| 24753 |
% \begin{pssyntax} |
| 24754 |
% \PSvar{X Y} \PSop{ToPnt} \PSarray{X Y} |
| 24755 |
% \end{pssyntax} |
| 24756 |
% \begin{macrocode} |
| 24757 |
/ToPnt { |
| 24758 |
[ 3 1 roll ] |
| 24759 |
} bind def |
| 24760 |
% \end{macrocode} |
| 24761 |
% \end{macro} |
| 24762 |
% |
| 24763 |
% \begin{macro}{AngToVec} |
| 24764 |
% Convert an angle to the related vector representation (normalized). The |
| 24765 |
% angle is with respect to the positive $x$-axis. |
| 24766 |
% \begin{pssyntax} |
| 24767 |
% \PSvar{angle} \PSop{AngToVec} \PSproc{X Y} |
| 24768 |
% \end{pssyntax} |
| 24769 |
% \begin{macrocode} |
| 24770 |
/AngToVec { |
| 24771 |
dup cos exch sin ToVec |
| 24772 |
} bind def |
| 24773 |
% \end{macrocode} |
| 24774 |
% \end{macro} |
| 24775 |
% |
| 24776 |
% \begin{macro}{NormalizeVec} |
| 24777 |
% Normalize a vector ($X'^2 + Y'^2 = 1$) |
| 24778 |
% \begin{pssyntax} |
| 24779 |
% \PSvar{X Y} \PSop{NormalizeVec} \PSvar{X' Y'} |
| 24780 |
% \end{pssyntax} |
| 24781 |
% \begin{macrocode} |
| 24782 |
/NormalizeVec { |
| 24783 |
2 copy |
| 24784 |
tx@Dict begin |
| 24785 |
Pyth |
| 24786 |
end |
| 24787 |
dup 3 1 roll div 3 1 roll div exch |
| 24788 |
} bind def |
| 24789 |
% \end{macrocode} |
| 24790 |
% \end{macro} |
| 24791 |
% |
| 24792 |
% \begin{macro}{@ABVect} |
| 24793 |
% Vector from (Xb,Yb) to (Xa,Ya) |
| 24794 |
% \begin{pssyntax} |
| 24795 |
% \PSvar{Xa Ya Xb Yb} \PSop{@ABVect} \PSvar{(Ya - Yb) (Xa - Xb)} |
| 24796 |
% \end{pssyntax} |
| 24797 |
% \begin{macrocode} |
| 24798 |
/@ABVect { |
| 24799 |
3 -1 roll exch sub 3 1 roll sub exch |
| 24800 |
} bind def |
| 24801 |
% \end{macrocode} |
| 24802 |
% \end{macro} |
| 24803 |
% |
| 24804 |
% \begin{macro}{@ABDist} |
| 24805 |
% \begin{pssyntax} |
| 24806 |
% \PSvar{Xa Ya Xb Yb} \PSop{@ABDist} \PSvar{dist} |
| 24807 |
% \end{pssyntax} |
| 24808 |
% \begin{macrocode} |
| 24809 |
/@ABDist { |
| 24810 |
3 -1 roll sub dup mul 3 1 roll sub dup mul add sqrt |
| 24811 |
} bind def |
| 24812 |
% \end{macrocode} |
| 24813 |
% \end{macro} |
| 24814 |
% |
| 24815 |
% \begin{macro}{@InterLines} |
| 24816 |
% Shorthand definition for \PSvar{InterLines} procedure of the |
| 24817 |
% \nxLPack{pst-eucl} package. Takes care of a bug in the |
| 24818 |
% \nxLPack{pst-eucl} package, that too many items are popped off the |
| 24819 |
% stack if no intersection point exists. |
| 24820 |
% \begin{pssyntax} |
| 24821 |
% \PSvar{X1 Y1 X2 Y2 X3 Y3 X4 Y4} \PSop{@InterLines} \PSvar{X Y ret} |
| 24822 |
% \end{pssyntax} |
| 24823 |
% \begin{macrocode} |
| 24824 |
/@InterLines { |
| 24825 |
tx@EcldDict begin |
| 24826 |
EqDr /D1c exch def /D1b exch def /D1a exch def |
| 24827 |
EqDr /D2c exch def /D2b exch def /D2a exch def |
| 24828 |
D1a D2b mul D1b D2a mul sub dup |
| 24829 |
ZeroEq { % parallel lines |
| 24830 |
pop 0 0 missed |
| 24831 |
}{ |
| 24832 |
/Det exch def |
| 24833 |
D1b D2c mul D1c D2b mul sub Det div |
| 24834 |
D1a D2c mul D2a D1c mul sub Det div |
| 24835 |
ok |
| 24836 |
} ifelse |
| 24837 |
end |
| 24838 |
} bind def |
| 24839 |
% \end{macrocode} |
| 24840 |
% \end{macro} |
| 24841 |
% |
| 24842 |
% \begin{macro}{@GetCenter} |
| 24843 |
% Shorthand definition for the \PSvar{GetCenter} procedure of the |
| 24844 |
% \nxLPack{pst-node} package. Takes either a string or a literal name |
| 24845 |
% for the node name \PSvar{name}. |
| 24846 |
% \begin{pssyntax} |
| 24847 |
% \PSname{name} \PSop{@GetCenter} \PSvar{X Y} |
| 24848 |
% \end{pssyntax} |
| 24849 |
% \begin{macrocode} |
| 24850 |
/@GetCenter { |
| 24851 |
tx@NodeDict begin load GetCenter end |
| 24852 |
} bind def |
| 24853 |
% \end{macrocode} |
| 24854 |
% \end{macro} |
| 24855 |
% |
| 24856 |
% \begin{macro}{@NewNode} |
| 24857 |
% Shorthand definition for creating a new pnode. |
| 24858 |
% \begin{macrocode} |
| 24859 |
/@NewNode { |
| 24860 |
tx@NodeDict begin |
| 24861 |
false exch 10 {InitPnode } NewNode |
| 24862 |
end |
| 24863 |
} bind def |
| 24864 |
% \end{macrocode} |
| 24865 |
% \end{macro} |
| 24866 |
% |
| 24867 |
% \begin{macro}{RefractVec} |
| 24868 |
% Calculate the refracted vector, the normal plane vector must be |
| 24869 |
% constructed with \PSvar{NormalVec}, see |
| 24870 |
% \url{http://en.wikipedia.org/wiki/Snell%27s_law#Vector_form} for the |
| 24871 |
% formulas. |
| 24872 |
% \begin{pssyntax} |
| 24873 |
% \PSvar{Xin Yin Xnorm Ynorm n1 n2} \PSop{RefractVec} \PSvar{Xout Yout} |
| 24874 |
% \end{pssyntax} |
| 24875 |
% If it would be total internal reflection, the output vector is (0, 0). |
| 24876 |
% \begin{macrocode} |
| 24877 |
/RefractVec { |
| 24878 |
(RefractVec) DebugBegin |
| 24879 |
TransformRefIndex exch TransformRefIndex exch div /n ED |
| 24880 |
/Ynorm ED /Xnorm ED |
| 24881 |
NormalizeVec /Yin ED /Xin ED |
| 24882 |
n abs 1 eq { |
| 24883 |
Xin Yin |
| 24884 |
}{ |
| 24885 |
/costheta1 Xnorm Ynorm Xin neg Yin neg DotProd def |
| 24886 |
1 n dup mul 1 costheta1 dup mul sub mul sub |
| 24887 |
dup 0 lt { |
| 24888 |
% \end{macrocode} |
| 24889 |
% would be total internal reflection, stop |
| 24890 |
% \begin{macrocode} |
| 24891 |
pop 0 0 |
| 24892 |
} { |
| 24893 |
sqrt /costheta2 ED |
| 24894 |
n Xin mul n Yin mul |
| 24895 |
n costheta1 mul costheta2 sub dup |
| 24896 |
Xnorm mul exch Ynorm mul VecAdd |
| 24897 |
} ifelse |
| 24898 |
} ifelse |
| 24899 |
DebugEnd |
| 24900 |
} bind def |
| 24901 |
% \end{macrocode} |
| 24902 |
% \end{macro} |
| 24903 |
% |
| 24904 |
% \begin{macro}{ReflectVec} |
| 24905 |
% Calculate the reflected vector, the normal plane vector must have been |
| 24906 |
% constructed with \PSvar{NormalVec}. |
| 24907 |
% \begin{pssyntax} |
| 24908 |
% \PSvar{Xin Yin Xnorm Ynorm} \PSop{ReflectVec} \PSvar{Xout Yout} |
| 24909 |
% \end{pssyntax} |
| 24910 |
% \begin{macrocode} |
| 24911 |
/ReflectVec { |
| 24912 |
(ReflectVec) DebugBegin |
| 24913 |
/Ynorm ED /Xnorm ED NormalizeVec /Yin ED /Xin ED |
| 24914 |
/costheta1 Xnorm Ynorm Xin neg Yin neg DotProd def |
| 24915 |
Xin Yin 2 costheta1 mul dup Xnorm mul exch Ynorm mul VecAdd |
| 24916 |
DebugEnd |
| 24917 |
} bind def |
| 24918 |
/ReflectGratVec { |
| 24919 |
(ReflectGratVec) DebugBegin |
| 24920 |
/Ynorm ED /Xnorm ED NormalizeVec /Yin ED /Xin ED |
| 24921 |
/costheta1 Xnorm Ynorm Xin neg Yin neg DotProd def |
| 24922 |
Xin Yin -2 costheta1 mul dup Xnorm mul exch Ynorm mul VecAdd |
| 24923 |
DebugEnd |
| 24924 |
} bind def |
| 24925 |
% \end{macrocode} |
| 24926 |
% \end{macro} |
| 24927 |
% |
| 24928 |
% \begin{macro}{CurvedInterface} |
| 24929 |
% \begin{pssyntax} |
| 24930 |
% \PSvar{Xp Yp Xr Yr} \PSop{CurvedInterface} \PSvar{X0' Y0' Xout Yout status} |
| 24931 |
% \end{pssyntax} |
| 24932 |
% \begin{macrocode} |
| 24933 |
/CurvedInterface { |
| 24934 |
(CurvedInterface) DebugBegin |
| 24935 |
2 copy /Yr ED /Xr ED |
| 24936 |
tx@Dict begin Pyth end /radius ED /Yp ED /Xp ED |
| 24937 |
/X0n X0 Xp sub def /Y0n Y0 Yp sub def |
| 24938 |
tx@EcldDict begin |
| 24939 |
X0n Y0n 2 copy 2 copy Xin 3 -1 roll add Yin 3 -1 roll add |
| 24940 |
2 copy 6 2 roll EqDr radius InterLineCircle |
| 24941 |
end |
| 24942 |
4 copy |
| 24943 |
0 eq 3 {exch 0 eq and} repeat { |
| 24944 |
% \end{macrocode} |
| 24945 |
% if all coordinates are zero we missed the circle, stop |
| 24946 |
% \begin{macrocode} |
| 24947 |
missed |
| 24948 |
} { |
| 24949 |
4 copy |
| 24950 |
% \end{macrocode} |
| 24951 |
% Chose which of the two intersection points to take. |
| 24952 |
% \begin{macrocode} |
| 24953 |
Xr neg Yr neg 2 copy |
| 24954 |
8 -2 roll @ABDist |
| 24955 |
5 1 roll @ABDist |
| 24956 |
gt { |
| 24957 |
% \end{macrocode} |
| 24958 |
% «dist from first point» $>$ «dist from second point», take second point. |
| 24959 |
% \begin{macrocode} |
| 24960 |
4 2 roll |
| 24961 |
} if pop pop |
| 24962 |
Xp Yp VecAdd |
| 24963 |
2 copy Xp Yp 4 2 roll @ABVect exch neg Xin Yin 4 2 roll NormalVec |
| 24964 |
Xin Yin 4 2 roll |
| 24965 |
% \end{macrocode} |
| 24966 |
% on stack: crossing point, in vector, and normal vector |
| 24967 |
% \begin{macrocode} |
| 24968 |
mode trans eq { |
| 24969 |
n1 n2 RefractVec |
| 24970 |
2 copy 0 eq exch 0 eq and { tir } { ok } ifelse |
| 24971 |
} { |
| 24972 |
ReflectVec ok |
| 24973 |
} ifelse /n1 n2 def |
| 24974 |
5 -2 roll 2 copy 7 2 roll X0 Y0 @ABVect Xin Yin DotProd 0 lt |
| 24975 |
PN 1 gt and { |
| 24976 |
pop missed |
| 24977 |
} if |
| 24978 |
} ifelse |
| 24979 |
DebugEnd |
| 24980 |
} bind def |
| 24981 |
% \end{macrocode} |
| 24982 |
% \end{macro} |
| 24983 |
% |
| 24984 |
% \begin{macro}{PlainInterface} |
| 24985 |
% \begin{pssyntax} |
| 24986 |
% \PSvar{Xp Yp dXp dYp} \PSop{PlainInterface} \PSvar{X0' Y0' Xout Yout status} |
| 24987 |
% \end{pssyntax} |
| 24988 |
% \begin{macrocode} |
| 24989 |
/PlainInterface {% |
| 24990 |
(PlainInterface) DebugBegin |
| 24991 |
/dYp ED /dXp ED /Yp ED /Xp ED |
| 24992 |
Xp Yp Xp dXp add Yp dYp add X0 Y0 X0 Xin add Y0 Yin add |
| 24993 |
@InterLines missed eq { |
| 24994 |
0 0 missed |
| 24995 |
} { |
| 24996 |
Xin Yin Xin Yin dXp dYp |
| 24997 |
mode refltrans eq { |
| 24998 |
neg exch NormalVec ReflectVec ok |
| 24999 |
} { |
| 25000 |
NormalVec |
| 25001 |
mode trans eq { |
| 25002 |
n1 n2 RefractVec |
| 25003 |
2 copy 0 eq exch 0 eq and { tir } { ok } ifelse |
| 25004 |
} { |
| 25005 |
ReflectVec ok |
| 25006 |
} ifelse |
| 25007 |
} ifelse |
| 25008 |
/n1 n2 def |
| 25009 |
5 -2 roll 2 copy 7 2 roll X0 Y0 @ABVect Xin Yin DotProd 0 lt |
| 25010 |
PN 1 gt and { |
| 25011 |
pop missed |
| 25012 |
} if |
| 25013 |
} ifelse |
| 25014 |
DebugEnd |
| 25015 |
} bind def |
| 25016 |
% \end{macrocode} |
| 25017 |
% \end{macro} |
| 25018 |
% |
| 25019 |
% \begin{macro}{PathInterface} |
| 25020 |
% \begin{pssyntax} |
| 25021 |
% \PSarray{path} \PSop{PathInterface} \PSvar{X0' Y0' Xout Yout status} |
| 25022 |
% \end{pssyntax} |
| 25023 |
% \begin{macrocode} |
| 25024 |
/PathInterface { |
| 25025 |
(PathInterface) DebugBegin |
| 25026 |
[ [X0 Y0] [X0 Xin add Y0 Yin add] ] exch |
| 25027 |
tx@IntersectDict begin IntersectLinePath end % [pathseg] t [isect] |
| 25028 |
dup length 0 eq { |
| 25029 |
pop pop pop 0 0 missed |
| 25030 |
} { |
| 25031 |
aload pop |
| 25032 |
Xin Yin Xin Yin |
| 25033 |
8 -2 roll exch % I.x I.y Xin Yin Xin Yin t [pathseg] |
| 25034 |
exch dup 9 1 roll exch % t I.x I.y Xin Yin Xin Yin t [pathseg] |
| 25035 |
dup length 2 eq { % a line |
| 25036 |
exch pop |
| 25037 |
aload pop aload pop 3 -1 roll aload pop VecSub % t I.x I.y Xin Yin Xin Yin dXp dYp |
| 25038 |
} { |
| 25039 |
exch dup cvi sub DeriveCurve |
| 25040 |
} ifelse |
| 25041 |
% the following part is copied from /PlainInterface |
| 25042 |
NormalVec |
| 25043 |
mode trans eq { |
| 25044 |
n1 n2 RefractVec |
| 25045 |
2 copy 0 eq exch 0 eq and { tir } { ok } ifelse |
| 25046 |
} { |
| 25047 |
ReflectVec ok |
| 25048 |
} ifelse |
| 25049 |
/n1 n2 def |
| 25050 |
5 -2 roll 2 copy 7 2 roll X0 Y0 @ABVect Xin Yin DotProd 0 lt |
| 25051 |
PN 1 gt and { |
| 25052 |
pop missed |
| 25053 |
} if |
| 25054 |
% t X0' Y0' Xout Yout status |
| 25055 |
} ifelse |
| 25056 |
DebugEnd |
| 25057 |
} bind def |
| 25058 |
% \end{macrocode} |
| 25059 |
% \end{macro} |
| 25060 |
% |
| 25061 |
% \begin{macro}{TransformRefIndex} |
| 25062 |
% If the refractive index on the stack is for the background (has value |
| 25063 |
% \opt{bgRefIndex}, which is \opt{0}), we replace it here with its actual |
| 25064 |
% value (\opt{1}). This is necessary to distinguish between background index |
| 25065 |
% and components having an index of \opt{1}, which can be changed with option |
| 25066 |
% \opt{n}. |
| 25067 |
% \begin{pssyntax} |
| 25068 |
% \PSvar{n} \PSop{TransformRefIndex} \PSvar{n|1} |
| 25069 |
% \end{pssyntax} |
| 25070 |
% \begin{macrocode} |
| 25071 |
/TransformRefIndex { |
| 25072 |
dup bgRefIndex eq { pop 1 } if |
| 25073 |
} bind def |
| 25074 |
% \end{macrocode} |
| 25075 |
% \end{macro} |
| 25076 |
% |
| 25077 |
% \begin{macro}{GetRefIndex} |
| 25078 |
% Evaluate the refractive index of component \opt{name}. |
| 25079 |
% \begin{pssyntax} |
| 25080 |
% \PSstring{name} \PSop{GetRefIndex} \PSvar{neval} |
| 25081 |
% \end{pssyntax} |
| 25082 |
% \begin{macrocode} |
| 25083 |
/GetRefIndex { |
| 25084 |
cvn load /n get /nbeam load exch |
| 25085 |
EvalRefIndex |
| 25086 |
} bind def |
| 25087 |
% \end{macrocode} |
| 25088 |
% \end{macro} |
| 25089 |
% |
| 25090 |
% \begin{macro}{EvalRefIndex} |
| 25091 |
% Evaluate the expression in \opt{nbeam} after setting refractive index to |
| 25092 |
% \opt{n}. |
| 25093 |
% \begin{pssyntax} |
| 25094 |
% \PSproc{nbeam} \PSvar{n} \PSop{GetRefIndex} \PSvar{neval} |
| 25095 |
% \end{pssyntax} |
| 25096 |
% \begin{macrocode} |
| 25097 |
/EvalRefIndex { |
| 25098 |
dup bgRefIndex eq not { |
| 25099 |
1 dict begin |
| 25100 |
% \end{macrocode} |
| 25101 |
% Store \opt{n} locally for evaluation of the mathematical expression in |
| 25102 |
% \opt{nbeam}. |
| 25103 |
% \begin{macrocode} |
| 25104 |
/n ED |
| 25105 |
exec |
| 25106 |
end |
| 25107 |
} if |
| 25108 |
} bind def |
| 25109 |
% \end{macrocode} |
| 25110 |
% \end{macro} |
| 25111 |
% |
| 25112 |
% \begin{macro}{Sellmaier} |
| 25113 |
% Calculate the refractive index for BK7 glass with the Sellmaier |
| 25114 |
% equation. The wavelength must be given in nanometre. The coefficients are |
| 25115 |
% taken from \href{http://en.wikipedia.org/wiki/Sellmeier_equation}. |
| 25116 |
% \begin{pssyntax} |
| 25117 |
% \PSvar{lambda} \PSop{Sellmaier} \PSvar{n} |
| 25118 |
% \end{pssyntax} |
| 25119 |
% \begin{macrocode} |
| 25120 |
/Sellmaier { |
| 25121 |
dup mul |
| 25122 |
dup dup 1.03961212 mul exch 6000.69867 sub div |
| 25123 |
exch dup dup 0.231792344 mul exch 20017.9144 sub div |
| 25124 |
exch dup 1.01046945 mul exch 103.560653e6 sub div |
| 25125 |
add add 1 add sqrt |
| 25126 |
} bind def |
| 25127 |
% \end{macrocode} |
| 25128 |
% \end{macro} |
| 25129 |
% |
| 25130 |
% \begin{macro}{TangentCrosspoint} |
| 25131 |
% Xp Yp Xt1 Yt1 Xt2 Yt2 |
| 25132 |
% \begin{macrocode} |
| 25133 |
/TangentCrosspoint { |
| 25134 |
4 copy 4 copy 14 -2 roll 2 copy |
| 25135 |
6 2 roll @ABVect neg exch |
| 25136 |
6 2 roll @ABVect neg exch |
| 25137 |
8 -2 roll VecAdd 10 2 roll VecAdd |
| 25138 |
@InterLines pop |
| 25139 |
} bind def |
| 25140 |
% \end{macrocode} |
| 25141 |
% \end{macro} |
| 25142 |
% |
| 25143 |
% \begin{macro}{NearestNodeTmp} |
| 25144 |
% {NodeB} CompA -> shortest distance, planenum |
| 25145 |
% \begin{macrocode} |
| 25146 |
/NearestNodeTmp { |
| 25147 |
exch /NodeB ED |
| 25148 |
/dist -1 def |
| 25149 |
dup cvn load /N get dup 1 eq { |
| 25150 |
[ exch (N) ] |
| 25151 |
} { |
| 25152 |
[ exch 1 1 3 -1 roll { } for ] |
| 25153 |
} ifelse |
| 25154 |
{ |
| 25155 |
2 copy pop |
| 25156 |
GetIfcCenterCorr 2 copy |
| 25157 |
NodeB @ABDist |
| 25158 |
dist 0 lt { |
| 25159 |
/dist ED |
| 25160 |
ToVec /node ED |
| 25161 |
} { |
| 25162 |
dup dist lt { |
| 25163 |
/dist ED |
| 25164 |
ToVec /node ED |
| 25165 |
} { |
| 25166 |
pop pop pop |
| 25167 |
} ifelse |
| 25168 |
} ifelse |
| 25169 |
} forall |
| 25170 |
pop dist /node load |
| 25171 |
} bind def |
| 25172 |
% \end{macrocode} |
| 25173 |
% \end{macro} |
| 25174 |
% |
| 25175 |
% \begin{macro}{NearestNode} |
| 25176 |
% Get the coordinates of the node of \PSvar{CompA} which is nearest to |
| 25177 |
% \PSvar{CompB}/\PSvar{NodeB}, or push the coordinates of |
| 25178 |
% \PSvar{NodeA} on stack if it is already a node. |
| 25179 |
% \begin{pssyntax} |
| 25180 |
% \PSvar{CompA/NodeA} \PSvar{CompB/NodeB} \PSop{NearestNode} \PSvar{X Y} |
| 25181 |
% \end{pssyntax} |
| 25182 |
% \begin{macrocode} |
| 25183 |
/NearestNode { |
| 25184 |
(NearestNode) DebugBegin |
| 25185 |
dup xcheck not { nametostr } if /CompB ED |
| 25186 |
dup xcheck not { |
| 25187 |
% \end{macrocode} |
| 25188 |
% CompA is a component |
| 25189 |
% \begin{macrocode} |
| 25190 |
nametostr /CompA ED |
| 25191 |
/CompB load dup xcheck not { |
| 25192 |
% \end{macrocode} |
| 25193 |
% CompB is a component |
| 25194 |
% \begin{macrocode} |
| 25195 |
/mindist -1 def |
| 25196 |
[ exch false GetInternalNodeNames ] |
| 25197 |
{ @GetCenter ToVec |
| 25198 |
CompA NearestNodeTmp |
| 25199 |
exch dup mindist ge mindist 0 ge and { |
| 25200 |
pop pop |
| 25201 |
}{ |
| 25202 |
/mindist ED /minnodeA ED |
| 25203 |
} ifelse |
| 25204 |
} forall |
| 25205 |
minnodeA |
| 25206 |
} { |
| 25207 |
CompA NearestNodeTmp exch pop exec |
| 25208 |
} ifelse |
| 25209 |
} { |
| 25210 |
% \end{macrocode} |
| 25211 |
% else, it is a node and we already have the appropriate coordinates on the |
| 25212 |
% stack |
| 25213 |
% \begin{macrocode} |
| 25214 |
exec |
| 25215 |
} ifelse |
| 25216 |
DebugEnd |
| 25217 |
} bind def |
| 25218 |
% \end{macrocode} |
| 25219 |
% \end{macro} |
| 25220 |
% |
| 25221 |
% \begin{macro}{RelConnAngle} |
| 25222 |
% Calculate start angle of \cs{nccurve} from CompA to CompB |
| 25223 |
% |
| 25224 |
% \begin{pssyntax} |
| 25225 |
% \PSvar{Xb Yb Xa Ya A B} \PSvar{fiberalign} \PSop{RelConnAngle} \PSvar{angle} |
| 25226 |
% \end{pssyntax} |
| 25227 |
% \begin{macrocode} |
| 25228 |
/RelConnAngle { |
| 25229 |
(RelConnAngle) DebugBegin |
| 25230 |
/fiberalign ED |
| 25231 |
dup xcheck not { nametostr } if /CompB ED |
| 25232 |
dup xcheck not { nametostr } if /CompA ED |
| 25233 |
/CompA load xcheck { |
| 25234 |
/CompB load xcheck { |
| 25235 |
% \end{macrocode} |
| 25236 |
% both parameters are nodes, so the angle is that of the direct connection line. |
| 25237 |
% \begin{macrocode} |
| 25238 |
@ABVect exch atan |
| 25239 |
} { |
| 25240 |
% \end{macrocode} |
| 25241 |
% B is a component, and A is a node: the angle at node A is calculated through component B |
| 25242 |
% \begin{macrocode} |
| 25243 |
4 copy @ABVect 6 2 roll pop pop 2 copy |
| 25244 |
% \end{macrocode} |
| 25245 |
% on stack: Xb-Xa Yb-Ya Xb Yb Xb Yb |
| 25246 |
% \begin{macrocode} |
| 25247 |
CompB (Center) NodeName @GetCenter |
| 25248 |
% \end{macrocode} |
| 25249 |
% on stack: Xb-Xa Yb-Ya Xb Yb Xb Yb Xbc Ybc |
| 25250 |
% \begin{macrocode} |
| 25251 |
4 2 roll @ABVect 4 2 roll |
| 25252 |
CompB |
| 25253 |
fiberalign center eq { |
| 25254 |
RelConnAngle@center |
| 25255 |
}{ |
| 25256 |
3 1 roll pop pop |
| 25257 |
RelConnAngle@ref |
| 25258 |
} ifelse |
| 25259 |
2 copy exch atan |
| 25260 |
7 3 roll 2 copy 9 -2 roll |
| 25261 |
DotProd 0 gt 5 1 roll DotProd 0 gt xor { 180 add } if |
| 25262 |
} ifelse |
| 25263 |
} { |
| 25264 |
% \end{macrocode} |
| 25265 |
% A is a component, B is insignificant |
| 25266 |
% |
| 25267 |
% discard coordinates of B |
| 25268 |
% \begin{macrocode} |
| 25269 |
4 2 roll pop pop 2 copy |
| 25270 |
CompA (Center) NodeName @GetCenter |
| 25271 |
4 2 roll @ABVect 4 2 roll |
| 25272 |
% \end{macrocode} |
| 25273 |
% on stack: Xac-Xa Yac-Xa Xa Ya |
| 25274 |
% \begin{macrocode} |
| 25275 |
CompA fiberalign center eq { |
| 25276 |
RelConnAngle@center |
| 25277 |
}{ |
| 25278 |
3 1 roll pop pop |
| 25279 |
RelConnAngle@tref |
| 25280 |
} ifelse |
| 25281 |
2 copy exch atan |
| 25282 |
% \end{macrocode} |
| 25283 |
% Xac-Xa Yac-Ya XaB-XaA YaB-YaA angleTrefline |
| 25284 |
% \begin{macrocode} |
| 25285 |
5 1 roll DotProd 0 gt { 180 add } if |
| 25286 |
} ifelse |
| 25287 |
DebugEnd |
| 25288 |
} bind def |
| 25289 |
% \end{macrocode} |
| 25290 |
% \end{macro} |
| 25291 |
% |
| 25292 |
% \begin{macro}{/RelConnAngle@ref} |
| 25293 |
% Calculate the vector of the reference line of \PSvar{CompA}. |
| 25294 |
% \begin{pssyntax} |
| 25295 |
% \PSstring{CompA} \PSop{RelConnAngle@ref} \PSvar{dX dY} |
| 25296 |
% \end{pssyntax} |
| 25297 |
% \begin{macrocode} |
| 25298 |
/RelConnAngle@ref { |
| 25299 |
dup (A) NodeName exch (B) NodeName |
| 25300 |
@GetCenter 3 -1 roll @GetCenter @ABVect |
| 25301 |
} bind def |
| 25302 |
% \end{macrocode} |
| 25303 |
% \end{macro} |
| 25304 |
% |
| 25305 |
% \begin{macro}{/RelConnAngle@tref} |
| 25306 |
% Same as \PSname{RelConnAngle@ref} but uses the transformed reference nodes. |
| 25307 |
% \begin{pssyntax} |
| 25308 |
% \PSvar{CompA} \PSop{RelConnAngle@ref} \PSvar{dX dY} |
| 25309 |
% \end{pssyntax} |
| 25310 |
% \begin{macrocode} |
| 25311 |
/RelConnAngle@tref { |
| 25312 |
dup (TrefA) NodeName exch (TrefB) NodeName |
| 25313 |
@GetCenter 3 -1 roll @GetCenter @ABVect |
| 25314 |
} bind def |
| 25315 |
% \end{macrocode} |
| 25316 |
% \end{macro} |
| 25317 |
% |
| 25318 |
% \begin{macro}{/RelConnAngle@center} |
| 25319 |
% Calculate the vector from the center node of \PSvar{CompA} to the |
| 25320 |
% node \PSstring{Xa, Ya}. |
| 25321 |
% \begin{pssyntax} |
| 25322 |
% \PSvar{Xa Ya CompA} \PSop{RelConnAngle@center} \PSvar{dX dY} |
| 25323 |
% \end{pssyntax} |
| 25324 |
% \begin{macrocode} |
| 25325 |
/RelConnAngle@center { |
| 25326 |
(Center) NodeName @GetCenter 4 2 roll @ABVect |
| 25327 |
} bind def |
| 25328 |
% \end{macrocode} |
| 25329 |
% \end{macro} |
| 25330 |
% |
| 25331 |
% \begin{macro}{GetIfcOrNodeCoord} |
| 25332 |
% \begin{pssyntax} |
| 25333 |
% \PSstring{IfcNum} \PSstring{CompName}/\PSproc{node} \PSop{GetIfcOrNodeCoord} \PSvar{x y} |
| 25334 |
% \end{pssyntax} |
| 25335 |
% \begin{macrocode} |
| 25336 |
/GetIfcOrNodeCoord { |
| 25337 |
(GetIfcOrNodeCoord) DebugBegin |
| 25338 |
dup xcheck { |
| 25339 |
exch pop exec |
| 25340 |
} { |
| 25341 |
nametostr exch nametostr exch GetIfcCenter |
| 25342 |
} ifelse |
| 25343 |
DebugEnd |
| 25344 |
} bind def |
| 25345 |
% \end{macrocode} |
| 25346 |
% \end{macro} |
| 25347 |
% |
| 25348 |
% \begin{macro}{connectInterfaces} |
| 25349 |
% \begin{pssyntax} |
| 25350 |
% \PSproc{vec} |
| 25351 |
% \end{pssyntax} |
| 25352 |
% InVec Center CenterTmp PrevMode relangle |
| 25353 |
% \begin{macrocode} |
| 25354 |
/connectInterfaces { |
| 25355 |
/relAngleTmp ED |
| 25356 |
PN 2 eq { |
| 25357 |
% \end{macrocode} |
| 25358 |
% initialize relAngle, the angle between plane connection and input vector |
| 25359 |
% \begin{macrocode} |
| 25360 |
pop @ABVect NormalizeVec 4 2 roll VecAngle /relAngleTmp ED |
| 25361 |
} if |
| 25362 |
PN 3 ge { |
| 25363 |
trans eq { |
| 25364 |
% \end{macrocode} |
| 25365 |
% previous plane was transmittive, recalculate the input vector |
| 25366 |
% \begin{macrocode} |
| 25367 |
@ABVect NormalizeVec 4 2 roll pop pop % remove Vec from stack |
| 25368 |
relAngleTmp matrix rotate dtransform |
| 25369 |
4 2 roll pop pop |
| 25370 |
} { |
| 25371 |
% \end{macrocode} |
| 25372 |
% else, the previous plane was reflective, recalculate relAngle |
| 25373 |
% \begin{macrocode} |
| 25374 |
@ABVect NormalizeVec 4 2 roll VecAngle /relAngleTmp ED |
| 25375 |
} ifelse |
| 25376 |
} if |
| 25377 |
relAngleTmp |
| 25378 |
} bind def |
| 25379 |
% \end{macrocode} |
| 25380 |
% \end{macro} |
| 25381 |
% |
| 25382 |
% \begin{macro}{GetCompRange} |
| 25383 |
% \PSstring{basename} \PSvar{start stop} |
| 25384 |
% \PSop{GetCompRange} \PSstring{basenamestart} \ldots\ \PSstring{basenamestop} |
| 25385 |
% \begin{macrocode} |
| 25386 |
/GetCompRange { |
| 25387 |
2 copy gt { 1 }{ -1 } ifelse 3 -1 roll |
| 25388 |
{ exch dup 3 -1 roll inttostr strcat exch} for |
| 25389 |
pop |
| 25390 |
} bind def |
| 25391 |
% \end{macrocode} |
| 25392 |
% \end{macro} |
| 25393 |
% |
| 25394 |
% \begin{macro}{CorrectDipoleIfc} |
| 25395 |
% For a dipole which has two interface nodes (1) and (N) which are very close |
| 25396 |
% together ($\text{dist} < 10^{-7}$) or which coincide, the automatic angle |
| 25397 |
% estimation of the fiber connections does not work properly. So these |
| 25398 |
% interfaces are separated as less as possible so that the NearestNode |
| 25399 |
% procedure estimates two different distances. The changed nodes are saved |
| 25400 |
% only in the interface dictionary as XCorr and YCorr. You must use these for |
| 25401 |
% the fiber connections. |
| 25402 |
% \begin{pssyntax} |
| 25403 |
% \PSstring{node1} \PSstring{node2} \PSstring{basename} \PSop{CorrectDipoleIfc} |
| 25404 |
% \end{pssyntax} |
| 25405 |
% \begin{macrocode} |
| 25406 |
/CorrectDipoleIfc { |
| 25407 |
(CorrectDipoleIfc) DebugBegin |
| 25408 |
dup dup 3 copy |
| 25409 |
8 -1 roll dup 9 1 roll NodeName exch 7 -1 roll dup 7 1 roll NodeName |
| 25410 |
gsave |
| 25411 |
tx@Dict begin |
| 25412 |
STV CP T |
| 25413 |
exch @GetCenter 3 -1 roll @GetCenter |
| 25414 |
end |
| 25415 |
grestore |
| 25416 |
4 copy @ABDist 1e-7 lt { |
| 25417 |
% \end{macrocode} |
| 25418 |
% The two nodes are closer together than $10^{-7}$, correct that to avoid |
| 25419 |
% problems with the angle direction when drawing fibers. |
| 25420 |
% \begin{macrocode} |
| 25421 |
6 -1 roll |
| 25422 |
gsave |
| 25423 |
tx@Dict begin |
| 25424 |
STV CP T |
| 25425 |
(TrefA) NodeName @GetCenter 7 -1 roll |
| 25426 |
(TrefB) NodeName @GetCenter |
| 25427 |
end |
| 25428 |
grestore |
| 25429 |
@ABVect NormalizeVec 2 copy |
| 25430 |
% \end{macrocode} |
| 25431 |
% The floating-point precision of the Postscript interpreter is |
| 25432 |
% approximately 8 digits, so in order to have an effect, the nodes must |
| 25433 |
% be separated by $10^{-7}$ times the maximum coordinate value. |
| 25434 |
% \begin{macrocode} |
| 25435 |
8 -2 roll abs exch abs mymax -1e-6 mul VecScale |
| 25436 |
8 -2 roll cvn load begin |
| 25437 |
IfcName load begin |
| 25438 |
X Y VecAdd /YCorr exch def /XCorr exch def |
| 25439 |
end |
| 25440 |
end |
| 25441 |
4 2 roll abs exch abs mymax 1e-6 mul VecScale |
| 25442 |
4 2 roll cvn load begin |
| 25443 |
IfcName load begin |
| 25444 |
X Y VecAdd /YCorr exch def /XCorr exch def |
| 25445 |
end |
| 25446 |
end |
| 25447 |
} { |
| 25448 |
10 { pop } repeat |
| 25449 |
} ifelse |
| 25450 |
DebugEnd |
| 25451 |
} bind def |
| 25452 |
% \end{macrocode} |
| 25453 |
% \end{macro} |
| 25454 |
% |
| 25455 |
% \begin{macro}{ClipFadeValue} |
| 25456 |
% Clip a number to the range [0:1]. |
| 25457 |
% \begin{pssyntax} |
| 25458 |
% \PSvar{value} \PSop{ClipFadeValue} \PSvar{clippedvalue} |
| 25459 |
% \end{pssyntax} |
| 25460 |
% \begin{macrocode} |
| 25461 |
/ClipFadeValue { |
| 25462 |
dup 0 lt { pop 0 }{ dup 1 gt { pop 1 } if } ifelse |
| 25463 |
} bind def |
| 25464 |
% \end{macrocode} |
| 25465 |
% \end{macro} |
| 25466 |
% \begin{macro}{fadeto@} |
| 25467 |
% The different fadeto modes. |
| 25468 |
% \begin{macrocode} |
| 25469 |
/fadeto@white { |
| 25470 |
FadeFunc ClipFadeValue @S mul @H exch @B sethsbcolor |
| 25471 |
} bind def |
| 25472 |
/fadeto@black { |
| 25473 |
FadeFunc ClipFadeValue @B mul @H exch @S exch sethsbcolor |
| 25474 |
} bind def |
| 25475 |
/fadeto@transparency { |
| 25476 |
FadeFunc ClipFadeValue @T mul .setopacityalpha |
| 25477 |
} bind def |
| 25478 |
% \end{macrocode} |
| 25479 |
% \end{macro} |
| 25480 |
% |
| 25481 |
% \begin{macro}{fadefunc@} |
| 25482 |
% The default fade functions, which are selected with the parameter |
| 25483 |
% 'fadefuncname'. The clipping is done afterwards. |
| 25484 |
% \begin{macrocode} |
| 25485 |
/fadefunc@linear { |
| 25486 |
neg 1 add |
| 25487 |
} bind def |
| 25488 |
/fadefunc@squared { |
| 25489 |
dup mul neg 1 add |
| 25490 |
} bind def |
| 25491 |
/fadefunc@gauss { |
| 25492 |
0.4 div dup mul neg Euler exch exp |
| 25493 |
} bind def |
| 25494 |
/fadefunc@exp { |
| 25495 |
-6 mul Euler exch exp |
| 25496 |
} bind def |
| 25497 |
% \end{macrocode} |
| 25498 |
% \end{macro} |
| 25499 |
% \begin{macro}{FadeStroke} |
| 25500 |
% Implement the 'fade' linestyle. |
| 25501 |
% \begin{macrocode} |
| 25502 |
/FadeStroke { |
| 25503 |
/FadeFunc ED /FadeToColor ED /@T ED |
| 25504 |
PathLength dup /@L ED exch div /@dl ED |
| 25505 |
mark |
| 25506 |
{ false counttomark 3 roll } |
| 25507 |
{ true counttomark 3 roll } |
| 25508 |
{} {} pathforall |
| 25509 |
currenthsbcolor /@B ED /@S ED /@H ED |
| 25510 |
newpath /currL 0 def |
| 25511 |
counttomark 3 idiv 1 1 3 -1 roll { |
| 25512 |
pop |
| 25513 |
{ % lineto |
| 25514 |
/y2 ED /x2 ED x2 x1 sub y2 y1 sub 2 copy |
| 25515 |
dup mul exch dup mul add sqrt dup @L div exch |
| 25516 |
@dl div 1 add floor dup dup |
| 25517 |
4 2 roll div 5 1 roll |
| 25518 |
1 1 3 -1 roll { |
| 25519 |
5 copy 4 copy 2 copy eq not { fadecorrect add } if exch div VecScale |
| 25520 |
6 2 roll 1 sub dup 0 eq not { fadecorrect sub } if exch div VecScale |
| 25521 |
x1 y1 VecAdd moveto x1 y1 VecAdd lineto |
| 25522 |
mul currL add FadeToColor |
| 25523 |
stroke |
| 25524 |
} for |
| 25525 |
4 1 roll pop pop mul currL add /currL ED |
| 25526 |
/y1 y2 def /x1 x2 def |
| 25527 |
} { % moveto |
| 25528 |
/y1 ED /x1 ED |
| 25529 |
} ifelse |
| 25530 |
} for |
| 25531 |
pop |
| 25532 |
} def |
| 25533 |
% \end{macrocode} |
| 25534 |
% \end{macro} |
| 25535 |
% |
| 25536 |
% \begin{macro}{TransformPath} |
| 25537 |
% Transforms a path (as defined by \cs{pssavepath} from |
| 25538 |
% \nxLPack{pst-intersect}) using the \opt{currentmatrix} and the |
| 25539 |
% \opt{CompMtrx} of the component. That is used only by \opt{LoadIfc}. |
| 25540 |
% \begin{pssyntax} |
| 25541 |
% \PSarray{path} \PSop{TransformPath} \PSarray{path'} |
| 25542 |
% \end{pssyntax} |
| 25543 |
% \begin{macrocode} |
| 25544 |
/TransformPath { |
| 25545 |
mark [ 3 -1 roll aload pop |
| 25546 |
counttomark 1 add counttomark 1 add exch 1 roll |
| 25547 |
{ |
| 25548 |
counttomark 1 eq { cleartomark exit } if |
| 25549 |
dup /curvetype eq { |
| 25550 |
7 1 roll |
| 25551 |
3 { CompMtrx transform CM itransform 7 2 roll } repeat |
| 25552 |
counttomark -1 roll dup counttomark 1 roll |
| 25553 |
7 roll |
| 25554 |
} { |
| 25555 |
3 1 roll CompMtrx transform CM itransform 3 -1 roll |
| 25556 |
counttomark -1 roll dup counttomark 1 roll |
| 25557 |
3 roll |
| 25558 |
} ifelse |
| 25559 |
} loop |
| 25560 |
] |
| 25561 |
} bind def |
| 25562 |
% \end{macrocode} |
| 25563 |
% \end{macro} |
| 25564 |
% |
| 25565 |
% \begin{macro}{DeriveCurve} |
| 25566 |
% Calculate the derivative of a curve at its parameter \PSvar{t}. This |
| 25567 |
% works only for the special case of third-order Bezier curves. |
| 25568 |
% |
| 25569 |
% \begin{align*} |
| 25570 |
% B(t) & = (1-t)^3 P_0 + 3(1-t)^2 t P_1 + 3(1-t)t^2 P_2 + t^3 P_3\\ |
| 25571 |
% B'(t) & = -3(1-t)^2 P_0 + 3(3t^2–4t+1) P_1 + 3(2t–3t^2) P_2 + 3t^2 P_3 |
| 25572 |
% \end{align*} |
| 25573 |
% \begin{pssyntax} |
| 25574 |
% \PSarray{curve} \PSvar{t} \PSop{DeriveCurve} \PSvar{dX dY} |
| 25575 |
% \end{pssyntax} |
| 25576 |
% \begin{macrocode} |
| 25577 |
/DeriveCurve { |
| 25578 |
(DeriveCurve) DebugBegin |
| 25579 |
exch dup length 4 eq not { |
| 25580 |
pop pop 0 0 |
| 25581 |
} { |
| 25582 |
aload pop 5 -1 roll |
| 25583 |
dup 1 exch sub dup mul -3 mul exch % P0 P1 P2 P3 C0=(-3(1-t)^2) t |
| 25584 |
dup dup -4 mul 1 add exch dup mul 3 mul add 3 mul exch % P0 P1 P2 P3 C0 C1=(3(3t^2-4t+1)) t |
| 25585 |
dup dup 2 mul exch dup mul -3 mul add 3 mul exch % P0 P1 P2 P3 C0 C1 C2=(3(2t-3t^2)) t |
| 25586 |
dup mul 3 mul % P0 P1 P2 P3 C0 C1 C2 C3=3t^2 |
| 25587 |
8 copy |
| 25588 |
0 6 -1 3 { -1 roll 0 get 3 -1 roll mul add } for |
| 25589 |
9 1 roll |
| 25590 |
0 6 -1 3 { -1 roll 1 get 3 -1 roll mul add } for |
| 25591 |
} ifelse |
| 25592 |
DebugEnd |
| 25593 |
} bind def |
| 25594 |
% \end{macrocode} |
| 25595 |
% \end{macro} |
| 25596 |
% |
| 25597 |
% \begin{macro}{GetBezierDeriv} |
| 25598 |
% Calculate the derivative of the bezier curve at the coordinate |
| 25599 |
% \PSvar{t}. |
| 25600 |
% \begin{equation} |
| 25601 |
% C(t) = \sum_{i=0}^n B_{i,n}(t)P_i\quad\text{with}\quad B_{i,n}(t) = (n over i) t^i(1-t)^{n-i} |
| 25602 |
% \end{equation} |
| 25603 |
% \begin{equation} |
| 25604 |
% C'(t) = \sum_{i=0}^n B'_{i,n}(t)P_i\quad\text{with}\quad B'_{i,n}(t) = (n over i)(i t^{i-1}(1-t)^{n-i} - (n-i)t^i(1-t)^{n-i-1}) |
| 25605 |
% \end{equation} |
| 25606 |
% \begin{pssyntax} |
| 25607 |
% \PSarray{[P0]\ldots[P\_n]} \PSvar{t} \PSop{DeriveBezier} \PSvar{x y} |
| 25608 |
% \end{pssyntax} |
| 25609 |
% \begin{macrocode} |
| 25610 |
/GetBezierDeriv { % t on stack |
| 25611 |
10 dict begin % hold all local |
| 25612 |
/t ED |
| 25613 |
/t1 1 t sub def % t1=1-t |
| 25614 |
dup length /BezierOrder exch def |
| 25615 |
/Points exch def |
| 25616 |
/Coeff tx@FuncDict begin Pascal end BezierOrder get def % get the coefficients |
| 25617 |
0 0 % initial values for x y |
| 25618 |
BezierOrder -1 0 { % BezierOrder,...,2,1,0 |
| 25619 |
/I ED % I=BezierOrder,...,2,1,0 |
| 25620 |
/J BezierOrder I sub def % J=0,1,2,...,BezierOrder |
| 25621 |
I 0 eq { |
| 25622 |
0 |
| 25623 |
}{ |
| 25624 |
I t I 1 sub exp mul t1 J exp mul % i*t^{i-1}*(1-t)^{n-i} |
| 25625 |
} ifelse |
| 25626 |
J 0 eq { |
| 25627 |
0 |
| 25628 |
} { |
| 25629 |
J t I exp mul t1 J 1 sub exp mul % -(n-i)t^i(1-t)^{n-i-1} |
| 25630 |
} ifelse |
| 25631 |
sub Coeff J get mul |
| 25632 |
Points I get aload pop 3 -1 roll VecScale VecAdd |
| 25633 |
} for % x y on stack |
| 25634 |
end |
| 25635 |
} bind def |
| 25636 |
% \end{macrocode} |
| 25637 |
% \end{macro} |
| 25638 |
% |
| 25639 |
% This fixes a problem in pst-intersect.pro v0.4 |
| 25640 |
% \begin{macrocode} |
| 25641 |
tx@IntersectDict begin |
| 25642 |
/IntersectLinePath { |
| 25643 |
3 dict begin |
| 25644 |
PreparePath dup length /n exch def |
| 25645 |
2 copy ElongateLine exch 3 -1 roll pop |
| 25646 |
/isect [] def |
| 25647 |
/t -1 def |
| 25648 |
{ |
| 25649 |
/n n 1 sub def |
| 25650 |
2 copy IntersectBeziers |
| 25651 |
dup 5 1 roll LoadIntersectionPoints |
| 25652 |
dup length 0 gt { |
| 25653 |
/isect exch def |
| 25654 |
0 get dup type /arraytype eq { |
| 25655 |
aload pop add 0.5 mul |
| 25656 |
} if n add /t exch def |
| 25657 |
exch pop |
| 25658 |
exit |
| 25659 |
} { |
| 25660 |
pop pop pop |
| 25661 |
} ifelse |
| 25662 |
} forall |
| 25663 |
t isect |
| 25664 |
end |
| 25665 |
} bind def |
| 25666 |
end |
| 25667 |
% \end{macrocode} |
| 25668 |
% |
| 25669 |
% \begin{macro}{GetCoordinatePair} |
| 25670 |
% Get the coordinate pair at position \PSvar{n} (n goes from 1 to N) and remove the other coordinates |
| 25671 |
% including mark from stack |
| 25672 |
% \begin{pssyntax} |
| 25673 |
% [ \PSvar{xN} \PSvar{yN} ... \PSvar{x1} \PSvar{y1} \PSvar{n} \PSop{GetCoordinatePair} |
| 25674 |
% \end{pssyntax} |
| 25675 |
% \begin{macrocode} |
| 25676 |
/GetCoordinatePair {% |
| 25677 |
2 mul -2 roll counttomark 1 add 2 roll cleartomark |
| 25678 |
} bind def |
| 25679 |
% \end{macrocode} |
| 25680 |
% \end{macro} |
| 25681 |
% \begin{macrocode} |
| 25682 |
/GetFirstInputCoordinatePair { 1 GetCoordinatePair } bind def |
| 25683 |
% \end{macrocode} |
| 25684 |
% If a coupler has only a single input node, this must be used for both nodes |
| 25685 |
% \begin{macrocode} |
| 25686 |
/GetLastInputCoordinatePair { counttomark 2 idiv 1 sub GetCoordinatePair } bind def |
| 25687 |
% \end{macrocode} |
| 25688 |
% \begin{macro}{mymax} |
| 25689 |
% For some reason Adobe Distiller crashes if 'max' operator is used |
| 25690 |
% with two floats which are very close (4e-5 in one case) |
| 25691 |
% \begin{macrocode} |
| 25692 |
/mymax { |
| 25693 |
2 copy lt { exch } if pop |
| 25694 |
} bind def |
| 25695 |
% \end{macrocode} |
| 25696 |
% \end{macro} |
| 25697 |
% |
| 25698 |
% \begin{macro}{debug} |
| 25699 |
% Print out the last \opt{N} elements from the stack, checks for |
| 25700 |
% stackunderflow. I \opt{N} is negative, the complete stack is |
| 25701 |
% printed. Compared to the \PSvar{stack} operand, it prints the content of |
| 25702 |
% procedures and array, which we use a lot. |
| 25703 |
% \begin{pssyntax} |
| 25704 |
% \PSvar{N} \PSop{debug} |
| 25705 |
% \end{pssyntax} |
| 25706 |
% \begin{macrocode} |
| 25707 |
/debug { |
| 25708 |
/@N ED count dup @N gt @N 0 ge and { pop @N } if |
| 25709 |
copy @N { == } repeat |
| 25710 |
} bind def |
| 25711 |
% \end{macrocode} |
| 25712 |
% \end{macro} |
| 25713 |
% |
| 25714 |
% \begin{macro}{debugComp} |
| 25715 |
% Print out all parameters and planes of the component \opt{compname}. |
| 25716 |
% \begin{pssyntax} |
| 25717 |
% \PSstring{compname} \PSop{debugComp} |
| 25718 |
% \end{pssyntax} |
| 25719 |
% \begin{macrocode} |
| 25720 |
/debugComp { |
| 25721 |
dup (debug comp ") exch strcat ("===============) strcat == |
| 25722 |
cvn load { |
| 25723 |
dup type /dicttype eq { |
| 25724 |
(plane----------------) == |
| 25725 |
{ == == } forall |
| 25726 |
(-----------done) == |
| 25727 |
} { == } ifelse |
| 25728 |
== |
| 25729 |
} forall |
| 25730 |
(================== done) == |
| 25731 |
} bind def |
| 25732 |
% \end{macrocode} |
| 25733 |
% \end{macro} |
| 25734 |
% |
| 25735 |
% \begin{macrocode} |
| 25736 |
end % tx@OptexpDict |
| 25737 |
% \end{macrocode} |
| 25738 |
%</prolog> |
| 25739 |
% \Finale |
| 25740 |
% \endinput |
| 25741 |
% |
| 25742 |
%<*indexstyle>font-size |
| 25743 |
headings_flag 1 |
| 25744 |
heading_prefix "\\textbf{" |
| 25745 |
heading_suffix "}\n" |
| 25746 |
quote '"' |
| 25747 |
level '!' |
| 25748 |
actual '=' |
| 25749 |
preamble |
| 25750 |
"\\begin{theindex}\n" |
| 25751 |
item_1 |
| 25752 |
"\\par\\leavevmode\\hangindent10pt\\makebox[25pt][r]{ -- }" |
| 25753 |
item_01 |
| 25754 |
"\\par\\leavevmode\\hangindent10pt\\makebox[25pt][r]{ -- }" |
| 25755 |
item_x1 |
| 25756 |
"\\par\\leavevmode\\hangindent10pt\\makebox[25pt][r]{ -- }" |
| 25757 |
item_2 |
| 25758 |
"\\par\\leavevmode\\hangindent20pt\\makebox[50pt][r]{ -- -- }" |
| 25759 |
item_12 |
| 25760 |
"\\par\\leavevmode\\hangindent20pt\\makebox[50pt][r]{ -- -- }" |
| 25761 |
item_x2 |
| 25762 |
"\\par\\leavevmode\\hangindent20pt\\makebox[50pt][r]{ -- -- }" |
| 25763 |
%</indexstyle> |