| 1 |
% \iffalse meta comment |
| 2 |
% File: numprint.dtx Copyright (C) 2000--2005, 2007, 2008, 2012 Harald Harders |
| 3 |
% \fi |
| 4 |
% |
| 5 |
% \iffalse |
| 6 |
% |
| 7 |
%<*driver> |
| 8 |
\listfiles |
| 9 |
\documentclass[ngerman,english,a4paper]{ltxdoc} |
| 10 |
\usepackage[T1]{fontenc} |
| 11 |
\IfFileExists{numprint.sty}{% |
| 12 |
\usepackage[warning,debug,autolanguage,boldmath,np]{numprint} |
| 13 |
}{% |
| 14 |
\GenericWarning{numprint.dtx}{Package file numprint.sty not found |
| 15 |
(Documentation will be messed up!^^J^^A |
| 16 |
Generate numprint.sty by (La)TeXing numprint.ins, process |
| 17 |
numprint.dtx again)^^J}\stop |
| 18 |
} |
| 19 |
\IfFileExists{eco.sty}{% |
| 20 |
\usepackage{eco} |
| 21 |
\renewcommand*\ttdefault{cmtt} |
| 22 |
}{% |
| 23 |
\GenericWarning{numprint.dtx}{Package file eco.sty not found |
| 24 |
(Documentation will be less clear than possible)} |
| 25 |
} |
| 26 |
\usepackage{longtable} |
| 27 |
\usepackage{mathcomp} |
| 28 |
\usepackage{babel} |
| 29 |
\usepackage{url} |
| 30 |
\usepackage{color} |
| 31 |
\IfFileExists{booktabs.sty}{\usepackage{booktabs}}{% |
| 32 |
\GenericWarning{numprint.dtx}{Package file booktabs.sty not |
| 33 |
found. Documentation formatting will be poor}% |
| 34 |
\def\toprule\hline |
| 35 |
\def\midrule\hline |
| 36 |
\def\bottomrule\hline} |
| 37 |
\GlossaryPrologue{\section*{{Change History}}% |
| 38 |
\markboth{{Change History}}{{Change History}}% |
| 39 |
Since the version~1.00 is an entirely new implementation, the Change |
| 40 |
History prior version~1.00 has been lost in this document. Have a |
| 41 |
look to \texttt{numprint032.dtx} or \texttt{README} to get it. |
| 42 |
} |
| 43 |
\GetFileInfo{numprint.sty} |
| 44 |
\title{The numprint package} |
| 45 |
\author{Harald Harders\\\texttt{[email protected]}} |
| 46 |
\date{Version \fileversion, \filedate; printed \today} |
| 47 |
\npdecimalsign{.}% |
| 48 |
\newlength{\tempdima}% |
| 49 |
\makeatletter |
| 50 |
\renewenvironment{table}[1][]{% |
| 51 |
\@float{table}[#1]% |
| 52 |
\centering% |
| 53 |
\setlength{\tempdima}{\abovecaptionskip}% |
| 54 |
\setlength{\abovecaptionskip}{\belowcaptionskip}% |
| 55 |
\setlength{\belowcaptionskip}{\tempdima}% |
| 56 |
}{% |
| 57 |
\end@float |
| 58 |
} |
| 59 |
\def\meta@font@select{\normalfont\itshape} |
| 60 |
\makeatother |
| 61 |
%% |
| 62 |
\EnableCrossrefs |
| 63 |
\CodelineIndex |
| 64 |
\DoNotIndex{\def,\edef,\let,\newcommand,\newenvironment,\newcounter} |
| 65 |
\DoNotIndex{\setcounter,\space,\if,\else,\fi,\empty,\@empty,\ifx,\fi} |
| 66 |
\DoNotIndex{\ifnum,\fi,\expandafter,\csname,\endcsname,\the} |
| 67 |
\DoNotIndex{\MessageBreak,\message,\newlength,\newif,\xdef,\newcount} |
| 68 |
\DoNotIndex{\begingroup,\endgroup,\,,\@tempcnta,\@tempdima,\advance} |
| 69 |
\DoNotIndex{\ensuremath,\filedate,\fileversion,\docdate} |
| 70 |
\DoNotIndex{\mathit,\mathrm,\mathsf,\nprt@tmp,\nprt@tmpnum,\relax} |
| 71 |
\DoNotIndex{\protect,\renewcommand,\setlength,\settowidth,\stepcounter} |
| 72 |
\DoNotIndex{\string} |
| 73 |
\CodelineNumbered |
| 74 |
\RecordChanges |
| 75 |
\CheckSum{2257} |
| 76 |
\begin{document} |
| 77 |
\DocInput{numprint.dtx} |
| 78 |
\end{document} |
| 79 |
%</driver> |
| 80 |
% \fi |
| 81 |
% |
| 82 |
% \changes{1.38}{2008/02/17}{Replaced \cs{stepcounter} and |
| 83 |
% \cs{addtocounter} by \cs{advance} |
| 84 |
% because otherwhise, \cs{numprint} does not work inside |
| 85 |
% \cs{ensuremath}\{\cs{text}\{\$\ldots\$\}\}.}% |
| 86 |
% \changes{1.38}{2008/02/17}{Moved counters \cs{nprt@curpos} and |
| 87 |
% \cs{nprt@rndpos} outside the macro definitions to avoid an overflow |
| 88 |
% of counters}% |
| 89 |
% \changes{1.37}{2007/01/08}{Add support for French}% |
| 90 |
% \changes{1.37}{2007/01/08}{Add an own separator for \textcelsius}% |
| 91 |
% \changes{1.37}{2007/01/08}{Use separator for percent also for permil}% |
| 92 |
% \changes{1.36}{2005/07/12}{Add support for Dutch}% |
| 93 |
% \changes{1.36}{2005/07/12}{Improve documentation}% |
| 94 |
% \changes{1.35}{2005/07/11}{Support not to separate percent sign from |
| 95 |
% number}% |
| 96 |
% \changes{1.30}{2004/08/11}{Add the commands \cs{lenprint} and |
| 97 |
% \cs{cntprint} that print lengths and counters.}% |
| 98 |
% \changes{1.22}{2004/08/08}{Use \cs{npunitcommand} to typeset units}% |
| 99 |
% \changes{1.21}{2004/08/01}{Add support for Portuguese}% |
| 100 |
% \changes{1.20}{2004/07/27}{Remove the reduction in font sizes in |
| 101 |
% documentation}% |
| 102 |
% \changes{1.20}{2004/07/27}{Allow \cs{numprint\{-e5\}} in addition to |
| 103 |
% \cs{numprint\{e5\}}}% |
| 104 |
% \changes{1.20}{2004/07/27}{Add padding a number on the left side}% |
| 105 |
% \changes{1.13}{2004/04/01}{Small fix in documentation}% |
| 106 |
% \changes{1.12}{2004/02/12}{Adapt Makefile to \TeX Live}% |
| 107 |
% \changes{1.11}{2003/11/09}{Avoid use of \cs{fileversion} etc.}% |
| 108 |
% \changes{1.00}{2003/10/07}{Total new implementation}% |
| 109 |
% |
| 110 |
% \maketitle |
| 111 |
% \begin{abstract} |
| 112 |
% \noindent |
| 113 |
% This package prints numbers with a separator every three digits and |
| 114 |
% convert numbers given as |12345.6e789| to |
| 115 |
% {\npstylegerman\numprint{12345,6e789}}. |
| 116 |
% Numbers are printed in the current mode (text or math) in order to use |
| 117 |
% the correct font. |
| 118 |
% |
| 119 |
% Many things, including the decimal sign, the thousand separator, as |
| 120 |
% well as the product sign can be changed by the user, e.g., to reach |
| 121 |
% \numprint{12,345.6e789}. |
| 122 |
% If requested, numprint can round numbers to a given number of digits. |
| 123 |
% |
| 124 |
% If an optional argument is given it is printed upright as unit. |
| 125 |
% Numbers can be rounded to a given number of digits. |
| 126 |
% |
| 127 |
% The package supports an automatic, language-dependent change of the |
| 128 |
% number format. |
| 129 |
% |
| 130 |
% Tabular alignment using the |tabular|(|*|), |array|, |tabularx|, and |
| 131 |
% |longtable| environments (similar to the |dcolumn| and |rccol| packages) |
| 132 |
% is supported using all features of numprint. Additional text can be |
| 133 |
% added before and after the formatted number. |
| 134 |
% |
| 135 |
% If you want to print numbers with different bases (octal, |
| 136 |
% hexadecimal, etc.) use the |nbaseprt| package which comes with the |
| 137 |
% |numprint| package. |
| 138 |
% \end{abstract} |
| 139 |
% |
| 140 |
% \tableofcontents |
| 141 |
% |
| 142 |
% \section*{Copyright} |
| 143 |
% Copyright 2000--2005, 2007, 2008, 2012 Harald Harders. |
| 144 |
% |
| 145 |
% This program can be redistributed and/or modified under the terms |
| 146 |
% of the LaTeX Project Public License Distributed from CTAN |
| 147 |
% archives in directory macros/latex/base/lppl.txt; either |
| 148 |
% version 1 of the License, or any later version. |
| 149 |
% |
| 150 |
% \section*{Remarks} |
| 151 |
% |
| 152 |
% \begingroup |
| 153 |
% \itshape |
| 154 |
% \sloppypar |
| 155 |
% The \cs{fourdigitsep}, \cs{fourdigitnosep}, |
| 156 |
% \cs{addmissingzero}, \cs{noaddmissingzero}, \cs{digits}, |
| 157 |
% \marginpar{\raggedleft\bfseries\Huge !}% |
| 158 |
% \cs{nodigits}, \cs{exponentsdigits}, and \cs{noexponentdigits} |
| 159 |
% commands have been renamed to \cs{npfourdigitsep}, |
| 160 |
% \cs{npfourdigitnosep}, \cs{npaddmissingzero}, |
| 161 |
% \cs{npnoaddmissingzero}, \cs{npdigits}, \cs{npnodigits}, |
| 162 |
% \cs{npexponentsdigits}, resp.\ \cs{npnoexponentdigits}. |
| 163 |
% |
| 164 |
% From version 1.00 to 1.10, the column types have been changed; see |
| 165 |
% section~\ref{sec:tabular}. |
| 166 |
% \marginpar{\raggedleft\bfseries\Huge !}% |
| 167 |
% If you want to preserve the old column types, use the package option |
| 168 |
% |oldcolumntypes|. |
| 169 |
% \endgroup |
| 170 |
% |
| 171 |
% For typesetting this documentation, the usage of different font |
| 172 |
% shapes has been reduced as much as possible in order to save disk |
| 173 |
% memory and download times. |
| 174 |
% Thus, for nearly all characters, the design size 10\,pt has been |
| 175 |
% used. |
| 176 |
% This reduced the size of the PDF file for version 1.10 from 858\,KB |
| 177 |
% to 396\,KB. |
| 178 |
% Please excuse that shortcoming in the typography. |
| 179 |
% |
| 180 |
% |
| 181 |
% \section{Load the package} |
| 182 |
% |
| 183 |
% To use this package place |
| 184 |
% \begin{verbatim} |
| 185 |
%\usepackage{numprint}\end{verbatim} |
| 186 |
% in the preamble of your document. |
| 187 |
% No options are necessary but some are available. |
| 188 |
% They are mentioned where their usage is described and in |
| 189 |
% section~\ref{sec:package-options}. |
| 190 |
% |
| 191 |
% \section{Print numbers in text and math mode} |
| 192 |
% |
| 193 |
% \DescribeMacro{\numprint}% |
| 194 |
% This package provides the command |
| 195 |
% \cs{numprint\oarg{unit}\marg{number}} that prints the \meta{number} |
| 196 |
% given in the required argument. |
| 197 |
% The number is printed in the current mode (math or text mode) so |
| 198 |
% that an eventual chosen difference between mathematical and text |
| 199 |
% numbers stays visible (e.g., by using the eco package). |
| 200 |
% |
| 201 |
% Numbers may contain of these characters: |
| 202 |
% ``|+-\pm0123456789.,eEdD|''. |
| 203 |
% Spaces, ``\cs{,}'' as well as ``\texttt{\~}'' in the argument are |
| 204 |
% ignored. |
| 205 |
% Either a ``|,|'' or a ''|.|'' can be used as decimal sign. |
| 206 |
% By default, no thousand separators are allowed in the |
| 207 |
% argument.\footnote{Section~\ref{sec:custom-parsing} describes how |
| 208 |
% this can be changed.} |
| 209 |
% ``|E|'', ``|e|'', ``|D|'', or ``|d|''\footnote{This is useful for |
| 210 |
% FORTRAN produced numbers.} is converted to an exponential format |
| 211 |
% (e.g., $x\cdot 10^{y}$ or $x\times 10^{y}$, depending on the |
| 212 |
% format settings described later). |
| 213 |
% ``|\pm|'' and ``|+-|'' produce a $\pm$. |
| 214 |
% |
| 215 |
% For example, typing |
| 216 |
% \begin{verbatim} |
| 217 |
%\numprint{-123456}; \numprint{\pm 123456}; \numprint{+-3,1415927e-3.1}\end{verbatim} |
| 218 |
% leads to ``\numprint{-123456}; \numprint{\pm 123456}; |
| 219 |
% \numprint{+-3,1415927e-3.1}''. |
| 220 |
% Notice that ``|.|'' and ``|,|'' can be mixed within one number and |
| 221 |
% are converted to the chosen decimal sign for the output. |
| 222 |
% |
| 223 |
% The number is printed in the active mode (text mode resp.\ math |
| 224 |
% mode). |
| 225 |
% This may be important if the digits are different in text and math |
| 226 |
% mode as in this document that uses old-style figures in text and |
| 227 |
% lining figures in math mode.\footnote{This is only the case if the |
| 228 |
% \texttt{eco} package is available on your system.} |
| 229 |
% See the difference between |
| 230 |
% ``\numprint{123456.134e123}'' and ``$\numprint{123456.134e123}$'', |
| 231 |
% produced by |
| 232 |
% \begin{verbatim} |
| 233 |
%``\numprint{123456.134e123}'' and ``$\numprint{123456.134e123}$''\end{verbatim} |
| 234 |
% |
| 235 |
% If no number is given before the exponential characters ``|e|'', |
| 236 |
% ``|E|'', ``|d|'', resp.\ ``|D|'', a pure exponential format is |
| 237 |
% generated. |
| 238 |
% For example, typing |
| 239 |
% \begin{verbatim} |
| 240 |
%\numprint{e4.3242}\end{verbatim} |
| 241 |
% leads to ``\numprint{e4.3242}''. |
| 242 |
% This also works with given signs, e.g., |
| 243 |
% \begin{verbatim} |
| 244 |
%\numprint{-e4.3242}, \numprint{+-e4.3242} \end{verbatim} |
| 245 |
% leads to ``\numprint{-e4.3242}, \numprint{+-e4.3242}''. |
| 246 |
% |
| 247 |
% Since \cs{numprint} expands the argument before typesetting it you |
| 248 |
% may also use commands inside the argument, e.g., |
| 249 |
% \begin{verbatim} |
| 250 |
%\def\numberbefore{1234}% |
| 251 |
%\def\totalnumber{\numberbefore.5678}% |
| 252 |
%\numprint{\totalnumber}\end{verbatim} |
| 253 |
% leads to |
| 254 |
% ``{\def\numberbefore{1234}\def\totalnumber |
| 255 |
% {\numberbefore.5678}\numprint{\totalnumber}}''. |
| 256 |
% |
| 257 |
% If the optional argument is given it is printed as a \meta{unit} in |
| 258 |
% math mode with an upright font (\verb|\mathrm|), e.g., |
| 259 |
% \begin{verbatim} |
| 260 |
%\numprint[N/mm^2]{-123456}\end{verbatim} |
| 261 |
% leads to ``\numprint[N/mm^2]{-123456}''. |
| 262 |
% |
| 263 |
% \changes{1.00}{2003/10/07}{Automatically don't separate degree sign |
| 264 |
% from number}% |
| 265 |
% By default, the space between the number and the unit is \cs{,}. |
| 266 |
% One exception is the degree symbol which is typeset without a |
| 267 |
% distance to the number, e.g., $\numprint[\tcdegree]{360}$ in |
| 268 |
% contrast to $\numprint[\tccelsius]{273,15}$ (only a single degree |
| 269 |
% symbol is typeset without a separator). |
| 270 |
% The |numprint| package detects this automatically if the |
| 271 |
% \cs{tcdegree} command of the |mathcomp| package, the \cs{textdegree} |
| 272 |
% command of the |textcomp| package, or the \cs{degree} command of the |
| 273 |
% |gensymb| package is used, e.g., |
| 274 |
% \begin{verbatim} |
| 275 |
%\numprint[\tcdegree]{360}, \numprint[\degree]{360}\end{verbatim} |
| 276 |
% Unfortunately, typing in the ``\texttt{\textdegree}'' sign directly |
| 277 |
% cannot be detected (any help welcome). |
| 278 |
% |
| 279 |
% You can change the spacing between the number and units, percent |
| 280 |
% signs, or degree symbols. |
| 281 |
% Have a look to Section~\ref{sec:changing-output}. |
| 282 |
% |
| 283 |
% |
| 284 |
% \changes{1.32}{2004/09/13}{Improve documentation about |
| 285 |
% \texttt{textcomp} symbols}% |
| 286 |
% If you want to use one of the |textcomp| symbols \textcelsius\ |
| 287 |
% (\cs{textcelsius}), \textohm\ (\cs{textohm}), \textmu\ |
| 288 |
% (\cs{textmu}), or \textperthousand\ (\cs{textperthousand})\ you have |
| 289 |
% to load either the |mathcomp| or the |gensymb| package because the |
| 290 |
% unit is printed in math mode. |
| 291 |
% If you decide to use the |textomp| package use \cs{tc\meta{name}} |
| 292 |
% instead of \cs{text\meta{name}}, e.g., \cs{tccelsius} instead of |
| 293 |
% \cs{textcelsius}. |
| 294 |
% If using |gensymb| just use \cs{\meta{name}}, e.g., |
| 295 |
% \cs{celsius}.\footnote{If you still use \cs{text\meta{name}} |
| 296 |
% numprint uses \cs{tc\meta{name}} or \cs{\meta{name}} and generates a |
| 297 |
% warning if one of these commands is available, and produces an error |
| 298 |
% if not.} |
| 299 |
% |
| 300 |
% |
| 301 |
% \DescribeMacro{\np} |
| 302 |
% Since it is timeconsuming to type in the long command \cs{numprint} |
| 303 |
% for every number in a text the shortcut \cs{np} can be defined by |
| 304 |
% specifying the package option~\texttt{np}. |
| 305 |
% |
| 306 |
% By default, numbers are written in the format |
| 307 |
% \begingroup |
| 308 |
% \npstyledefault |
| 309 |
% \numprint{12345,12345e12345}, |
| 310 |
% \endgroup |
| 311 |
% for instance. |
| 312 |
% This means, decimal sign ``\texttt{,}'', thousand |
| 313 |
% separator ``\cs{,}'', and product sign |
| 314 |
% ``\texttt{\{\}\cs{cdot}\{\}}''. |
| 315 |
% This accords to German number formats and is a result of the history |
| 316 |
% of this package. |
| 317 |
% How you can change this is described in the following sections. |
| 318 |
% Especially, have a look at the |autolanguage| package option in |
| 319 |
% section~\ref{sec:international}. |
| 320 |
% |
| 321 |
% |
| 322 |
% \subsection{Print counters and lengths} |
| 323 |
% |
| 324 |
% If you want to print a counter or a length, you may of course use |
| 325 |
% \begin{verbatim} |
| 326 |
%\numprint{\arabic{page}}\end{verbatim} |
| 327 |
% resp. |
| 328 |
% \begin{verbatim} |
| 329 |
%\makeatletter |
| 330 |
%\numprint[pt]{\strip@pt\textwidth} |
| 331 |
%\makeatother\end{verbatim} |
| 332 |
% But these methods are not really nice. |
| 333 |
% |
| 334 |
% \DescribeMacro{\cntprint}% |
| 335 |
% For printing counters, you may use |
| 336 |
% \cs{cntprint\oarg{unit}\marg{counter}} where \meta{unit} is an |
| 337 |
% optional unit that is printed as by \cs{numprint}. |
| 338 |
% \meta{counter} is the name of a \LaTeX\ counter, for example, |
| 339 |
% \begin{verbatim} |
| 340 |
%$\cntprint{page}$\end{verbatim} |
| 341 |
% leads to ``$\cntprint{page}$''. |
| 342 |
% |
| 343 |
% \DescribeMacro{\lenprint}% |
| 344 |
% Lengths can be printed using \cs{lenprint\oarg{unit}\marg{length}}. |
| 345 |
% \meta{length} is the macro containing a \LaTeX\ length or a \TeX\ |
| 346 |
% dimension, e.g., \cs{textwidth}. |
| 347 |
% \meta{unit} is a different thing here. |
| 348 |
% If the unit is not given \cs{lenprint} uses \LaTeX's standard and |
| 349 |
% prints the length in |pt|: |
| 350 |
% \begin{verbatim} |
| 351 |
%$\lenprint{\textwidth}$\end{verbatim} |
| 352 |
% leads to ``$\lenprint{\textwidth}$''. |
| 353 |
% Giving |pt| does not change anything. |
| 354 |
% But if you use other units, e.g., |mm|, |cm|, or |in|, the length is |
| 355 |
% written using the given unit: |
| 356 |
% \begin{verbatim} |
| 357 |
%$\lenprint[pt]{\textwidth}$, |
| 358 |
%$\lenprint[in]{\textwidth}$, |
| 359 |
%$\lenprint[bp]{\textwidth}$, |
| 360 |
%$\lenprint[mm]{\textwidth}$, |
| 361 |
%$\lenprint[cm]{3\textwidth}$\end{verbatim} |
| 362 |
% gives ``$\lenprint[pt]{\textwidth}$, |
| 363 |
% $\lenprint[in]{\textwidth}$, |
| 364 |
% $\lenprint[bp]{\textwidth}$, |
| 365 |
% $\lenprint[mm]{\textwidth}$, |
| 366 |
% $\lenprint[cm]{3\textwidth}$''. |
| 367 |
% |
| 368 |
% As you can see in the example, it is also possible to specify a |
| 369 |
% factor in the argument, e.g. |3\textwidth|. |
| 370 |
% When printing lengths, it is often desirable not to print all |
| 371 |
% decimal places. |
| 372 |
% |numprint| can round numbers, described in section~\ref{sec:round}. |
| 373 |
% |
| 374 |
% \cs{lenprint} knows the units |pt|, |bp|, |in|, |ft|, |mm|, |cm|, |
| 375 |
% |m|, and |km|. |
| 376 |
% Section~\ref{sec:more-units} describes how to add or change units. |
| 377 |
% |
| 378 |
% |
| 379 |
% \section{Customization} |
| 380 |
% |
| 381 |
% \subsection{Eliminate separators for four-digit numbers} |
| 382 |
% |
| 383 |
% At least in German it is common not to add a separator to four-digit |
| 384 |
% numbers in non-technical texts, e.g., to typeset |
| 385 |
% {\npfourdigitnosep``\numprint{1234}''} instead of ``\numprint{1234}'', |
| 386 |
% but longer numbers are separated: ``\numprint{12345}''. |
| 387 |
% If a number, in contrast, has less than five digits on one side of |
| 388 |
% the decimal sign but five or more digits on the other side, |
| 389 |
% separators are inserted on both sides, e.g., |
| 390 |
% {\npfourdigitnosep``\numprint{1234,1234}'' but |
| 391 |
% ``\numprint{1234,12345}''}. |
| 392 |
% |
| 393 |
% \DescribeMacro{\npfourdigitsep}% |
| 394 |
% \DescribeMacro{\npfourdigitnosep}% |
| 395 |
% This behaviour can be achieved using the command |
| 396 |
% \cs{npfourdigitnosep}. |
| 397 |
% If using this switch inside a group the change is local. |
| 398 |
% You can switch back to separating with \cs{npfourdigitsep}. |
| 399 |
% An example: |
| 400 |
% \begin{verbatim} |
| 401 |
%\npfourdigitnosep$\numprint{1234.1234}$, $\numprint{12345.12345}$ -- |
| 402 |
%\npfourdigitsep$\numprint{1234.1234}$, $\numprint{12345.12345}$\end{verbatim} |
| 403 |
% Leads to |
| 404 |
% {``\npfourdigitnosep$\numprint{1234.1234}$, $\numprint{12345.12345}$ -- |
| 405 |
% \npfourdigitsep$\numprint{1234.1234}$, $\numprint{12345.12345}$''.} |
| 406 |
% Default values can be set by the package options |sepfour| and |
| 407 |
% |nosepfour|. |
| 408 |
% |
| 409 |
% |
| 410 |
% \subsection{Add missing zeros before or after decimal sign} |
| 411 |
% |
| 412 |
% \DescribeMacro{\npaddmissingzero}% |
| 413 |
% \DescribeMacro{\npnoaddmissingzero}% |
| 414 |
% Sometimes people let out a leading zero or a zero after the |
| 415 |
% decimalsign, e.g., ``|123.|'' or ``|.123|''. |
| 416 |
% Numprint can add the left out zero, when \cs{addmissingzero} is |
| 417 |
% used. |
| 418 |
% If, however, no decimal sign is given, e.g., ``|123|'', no decimal |
| 419 |
% sign or zero is appended. |
| 420 |
% Adding zeros can be switched off with \cs{noaddmissingzero}. |
| 421 |
% The corresponding package options are |addmissingzero| and |
| 422 |
% |noaddmissinzero|. |
| 423 |
% The default is |addmissingzero|. |
| 424 |
% |
| 425 |
% |
| 426 |
% \subsection{Add a plus sign}% |
| 427 |
% \changes{1.00}{2003/10/07}{Support for adding a plus to a number}% |
| 428 |
% |
| 429 |
% \DescribeMacro{\npaddplus}% |
| 430 |
% \DescribeMacro{\npnoaddplus}% |
| 431 |
% Using the \cs{npaddplus} command or the package option |addplus|, a |
| 432 |
% plus sign can be added to a number that is specified without a |
| 433 |
% sign. |
| 434 |
% This can be switched off using \cs{npnoaddplus} resp.\ |noaddplus|. |
| 435 |
% |
| 436 |
% \DescribeMacro{\npaddplusexponent}% |
| 437 |
% \DescribeMacro{\npnoaddplusexponent}% |
| 438 |
% The commands \cs{npaddplusexponent} and \cs{npnoaddplusexponent} |
| 439 |
% resp.\ the package options |addplusexponent| and |noaddplusexponent| |
| 440 |
% do the same for the exponents that the commands/options described |
| 441 |
% above do for the number. |
| 442 |
% |
| 443 |
% |
| 444 |
% \subsection{Rounding numbers}% |
| 445 |
% \label{sec:round}% |
| 446 |
% |
| 447 |
% \DescribeMacro{\nprounddigits}% |
| 448 |
% \DescribeMacro{\nproundexpdigits}% |
| 449 |
% \DescribeMacro{\npnoround}% |
| 450 |
% \DescribeMacro{\npnoroundexp}% |
| 451 |
% By default, as many digits are printed after the decimal sign, as |
| 452 |
% the \cs{numprint} command gets as argument. |
| 453 |
% This behaviour can be changed to print a given number of digits |
| 454 |
% where the number is rounded resp.\ filled with zeros. |
| 455 |
% |
| 456 |
% This can be switched on using the |
| 457 |
% \cs{nprounddigits\marg{digits}} command for ordinary |
| 458 |
% numbers and the \cs{nproundexpdigits\marg{digits}} |
| 459 |
% command for exponents. |
| 460 |
% Rounding is switched off with \cs{npnoround} resp.\ |
| 461 |
% \cs{npnoroundexp}. |
| 462 |
% For example, |
| 463 |
% \begin{verbatim} |
| 464 |
%\nprounddigits{2}$\numprint{1.123}$, $\numprint{1.149}$, |
| 465 |
%$\numprint{1}$, $\numprint{9.999}$ $\numprint{-9.999}$ -- |
| 466 |
%\npnoround$\numprint{1.123}$, $\numprint{1.149}$, |
| 467 |
%$\numprint{1}$, $\numprint{9.999}$, $\numprint{-9.999}$\end{verbatim} |
| 468 |
% leads to |
| 469 |
% ``\nprounddigits{2}$\numprint{1.123}$, $\numprint{1.149}$, |
| 470 |
% $\numprint{1}$, $\numprint{9.999}$ $\numprint{-9.999}$ -- |
| 471 |
% \npnoround$\numprint{1.123}$, $\numprint{1.149}$, |
| 472 |
% $\numprint{1}$, $\numprint{9.999}$, $\numprint{-9.999}$'' |
| 473 |
% |
| 474 |
% |
| 475 |
% \subsection{Padding a number on the left side}% |
| 476 |
% |
| 477 |
% \DescribeMacro{\nplpadding}% |
| 478 |
% \DescribeMacro{\npnolpadding}% |
| 479 |
% Sometimes it is desireable to have a number of a fixed length with |
| 480 |
% the missing digits filled with a character (mostly the character |
| 481 |
% ``0'', so this is the default). |
| 482 |
% This can be achieved calling |
| 483 |
% \cs{nplpadding\oarg{character}\marg{digits}}. |
| 484 |
% This affects only the mantissa, the part after the decimal sign and |
| 485 |
% signs are not counted! |
| 486 |
% If the orginal number has more digits than \meta{digits} no |
| 487 |
% characters will be inserted. |
| 488 |
% For example, |
| 489 |
% \begin{verbatim} |
| 490 |
%\nplpadding{6}% |
| 491 |
%$\numprint{1234}$, $\numprint{-1234}$, |
| 492 |
%$\numprint{12345678}$, $\numprint{1234.5678}$ -- |
| 493 |
%\nplpadding[x]{6}% |
| 494 |
%$\numprint{1234}$, $\numprint{-1234}$, |
| 495 |
%$\numprint{12345678}$, $\numprint{1234.5678}$\end{verbatim} |
| 496 |
% leads to \begingroup |
| 497 |
% ``\nplpadding{6}$\numprint{1234}$, $\numprint{-1234}$, |
| 498 |
% $\numprint{12345678}$, $\numprint{1234.5678}$ -- |
| 499 |
% \nplpadding[x]{6}$\numprint{1234}$, $\numprint{-1234}$, |
| 500 |
% $\numprint{12345678}$, $\numprint{1234.5678}$'' |
| 501 |
% \endgroup |
| 502 |
% |
| 503 |
% \cs{npnolpadding} switches padding off. |
| 504 |
% |
| 505 |
% |
| 506 |
% \subsection{Replace zeros by other characters} |
| 507 |
% |
| 508 |
% \DescribeMacro{\npreplacenull}% |
| 509 |
% \DescribeMacro{\npprintnull}% |
| 510 |
% For amounts of money, sometimes a zero after the decimal sign is |
| 511 |
% replaced by different symbols, as for example ``---''. |
| 512 |
% This can be done by calling the command |
| 513 |
% \cs{npreplacenull\marg{replacement}}, e.g., |
| 514 |
% \begin{verbatim} |
| 515 |
%\npreplacenull{\mbox{---}}\end{verbatim} |
| 516 |
% Here, \cs{mbox} guarantees that ``---'' is printed in text |
| 517 |
% mode.\footnote{You should better use \texttt{amsmath} and the |
| 518 |
% command \cs{text} which preserves the correct text size, too.} |
| 519 |
% |
| 520 |
% It can be switched off using \cs{npprintnull}. |
| 521 |
% |
| 522 |
% |
| 523 |
% \subsection{Change the format of units} |
| 524 |
% |
| 525 |
% \DescribeMacro{\npunitcommand}% |
| 526 |
% By default, the unit is printed in math mode with an upright font. |
| 527 |
% This is reached by using the \cs{npunitcommand} macro which by |
| 528 |
% default is defined as follows: |
| 529 |
% \begin{verbatim} |
| 530 |
%\newcommand*\npunitcommand[1]{\ensuremath{\mathrm{#1}}}\end{verbatim} |
| 531 |
% If you want to change this, redefine the \cs{npunitcommand}. |
| 532 |
% You really should use either \cs{ensuremath} or |
| 533 |
% \cs{text}\footnote{Provided by \texttt{amsmath}.} to ensure math or |
| 534 |
% text mode respectively. |
| 535 |
% \cs{npunitcommand} has to take one mandatory argument. |
| 536 |
% |
| 537 |
% For example, a blue unit is reached by |
| 538 |
% \begin{verbatim} |
| 539 |
%\renewcommand*\npunitcommand[1]{\ensuremath{\color{blue}\mathrm{#1}}}\end{verbatim} |
| 540 |
% And here is the result: |
| 541 |
%\begingroup |
| 542 |
%\renewcommand*\npunitcommand[1]{\ensuremath{\color{blue}\mathrm{#1}}}% |
| 543 |
%\numprint[N/mm^2]{300} |
| 544 |
%\endgroup |
| 545 |
% |
| 546 |
% |
| 547 |
% \section{Add more units to \cs{lenprint}}% |
| 548 |
% \label{sec:more-units}% |
| 549 |
% |
| 550 |
% \DescribeMacro{\npdefunit}% |
| 551 |
% The command \cs{npdefunit\marg{unitname}\marg{unit}\marg{scale}} can |
| 552 |
% be used to define new units or to redefine existing ones. |
| 553 |
% For example, |mm| is defined as follows: |
| 554 |
% \begin{verbatim} |
| 555 |
%\npdefunit{mm}{mm}{0.35145980351}\end{verbatim} |
| 556 |
% The first argument \meta{unitname} is the \LaTeX\ internal name that |
| 557 |
% will be given as unit in the \cs{lenprint} command. |
| 558 |
% The second argument \meta{unit} is the text that will be printed |
| 559 |
% out. |
| 560 |
% |
| 561 |
% The \meta{scale} arises from the fact that the default unit |
| 562 |
% $\mathrm{pt}$ is defined as $\np[pt]{1} = 1/\np[in]{72,27} = |
| 563 |
% \np[in]{0,01383700013}$ and $\np[in]{1} = \np[mm]{25,4}$. |
| 564 |
% Thus, $\np[pt]{1} = \np{0,01383700013} \times \np[mm]{25,4} = |
| 565 |
% \np[mm]{0.35145980351}$. |
| 566 |
% For defining a new unit, the factor from $\mathrm{pt}$ to the |
| 567 |
% desired unit has to be calculated and given as third argument of |
| 568 |
% \cs{npdefunit}. |
| 569 |
% To redefine a unit with unchanged scale, use |*| instead. |
| 570 |
% For example, |
| 571 |
% \begin{verbatim} |
| 572 |
%\npdefunit{in}{\!''}{*}\end{verbatim} |
| 573 |
% redefines |in| to print $\mathrm{''}$ as unit instead of the default |
| 574 |
% $\mathrm{in}$. |
| 575 |
% The \cs{!} is used to remove the separator between number and unit |
| 576 |
% (\cs{,}) again. |
| 577 |
% This only works correctly if \cs{,} and \cs{!} use the same |
| 578 |
% measure. |
| 579 |
% \begin{verbatim} |
| 580 |
%$\lenprint[in]{\textwidth}$, |
| 581 |
%\npdefunit{in}{\!''}{*}% |
| 582 |
%$\lenprint[in]{\textwidth}$\end{verbatim} |
| 583 |
% leads to \begingroup |
| 584 |
% ``$\lenprint[in]{\textwidth}$, |
| 585 |
% \npdefunit{in}{\!''}{*}$\lenprint[in]{\textwidth}$''. |
| 586 |
% \endgroup |
| 587 |
% |
| 588 |
% |
| 589 |
% |
| 590 |
% \section{International support}% |
| 591 |
% \label{sec:international}% |
| 592 |
% \changes{1.00}{2003/10/07}{Automatic support for different number |
| 593 |
% formats in different languages}% |
| 594 |
% |
| 595 |
% As mentioned above, |numprint| uses German settings for numbers: |
| 596 |
% thousand separator ``\cs{,}'', decimal sign ``\texttt{,}'', product |
| 597 |
% sign ``\cs{cdot}'', unit separator \cs{,}, and no degree separator, |
| 598 |
% by default. |
| 599 |
% This will stay stable for compatibility with older versions even if |
| 600 |
% its unlogical since the default language of \LaTeX\ is English. |
| 601 |
% |
| 602 |
% Using the package option |autolanguage| this can be fixed. |
| 603 |
% If you are using this option without the |babel| package the |
| 604 |
% settings are switched to English at \cs{begin\{document\}}. |
| 605 |
% See Table~\ref{tab:defaults}. |
| 606 |
% |
| 607 |
% \begin{table}% |
| 608 |
% \centering |
| 609 |
% \caption{Default values for language settings}% |
| 610 |
% \label{tab:defaults}% |
| 611 |
% \begin{tabular}{lllllll} |
| 612 |
% \toprule |
| 613 |
% language& thousand& decimal& product& unit& percent& degree \\ |
| 614 |
% & sep.& sign& sign& sep.& sep.& sep. \\ |
| 615 |
% \midrule |
| 616 |
% English& \texttt{,}& \texttt{.}& \cs{times}& \cs{,}& \cs{,}& none \\ |
| 617 |
% German& \cs{,}& \texttt{,}& \cs{cdot}& \cs{,}& \cs{,}& none \\ |
| 618 |
% Portuguese& \texttt{.}& \texttt{,}& \cs{cdot}& \cs{,}& \cs{,}& none \\ |
| 619 |
% Dutch& \cs{,}& \texttt{,}& \cs{cdot}& \cs{,}& none& none \\ |
| 620 |
% French& \texttt{\texttildelow}& \texttt{,}& \cs{cdot}& \cs{,}& \cs{,}& none \\ |
| 621 |
% \bottomrule |
| 622 |
% \end{tabular}% |
| 623 |
% \end{table} |
| 624 |
% |
| 625 |
% \DescribeMacro{\selectlanguage} |
| 626 |
% If you are using the |babel| package in conjunction with the |
| 627 |
% |autolanguage| package option, the behaviour of \cs{numprint} alters |
| 628 |
% with the active language. |
| 629 |
% If you, for instance, use |
| 630 |
% \begin{verbatim} |
| 631 |
%\selectlanguage{ngerman}\end{verbatim} |
| 632 |
% the German settings are selected. |
| 633 |
% If you then switch back to English, the English settings are active |
| 634 |
% again. |
| 635 |
% |
| 636 |
% The current version supports English, German, Portuguese, Dutch, and |
| 637 |
% French. |
| 638 |
% Unfortunately, I don't really know how to write numbers in other |
| 639 |
% languages than German. |
| 640 |
% I am quite sure that the English version also is |
| 641 |
% correct.\footnote{Maybe, the percent sign separator \cs{,} is not |
| 642 |
% common, but I will leave its value unchanged to preserve |
| 643 |
% compatibility with older versions.} |
| 644 |
% But please help me to add other languages. |
| 645 |
% |
| 646 |
% If you want other settings than the default ones, listed in |
| 647 |
% Table~\ref{tab:defaults}, please refer to |
| 648 |
% Section~\ref{sec:advanced:international}. |
| 649 |
% |
| 650 |
% As long as |numprint| does not support your language you may add the |
| 651 |
% definitions by yourself. |
| 652 |
% How this can be done is also described in |
| 653 |
% Section~\ref{sec:advanced:international}. |
| 654 |
% |
| 655 |
% |
| 656 |
% \section{Print aligned numbers in tabulars}% |
| 657 |
% \label{sec:tabular}% |
| 658 |
% \changes{1.10}{2003/10/12}{New tabular alignment mechanism}% |
| 659 |
% |
| 660 |
% Aligning numbers in tabulars is providede by the \texttt{dcolumn} |
| 661 |
% and \texttt{rccol} packages. |
| 662 |
% But they have two disadvantages. |
| 663 |
% First, they do not support typesetting numbers in the same way as |
| 664 |
% \cs{numprint} does. |
| 665 |
% Second, they force the numbers to be typeset in math mode. |
| 666 |
% Thus, this packages provides own mechanisms to gain aligned |
| 667 |
% numbers. |
| 668 |
% |
| 669 |
% In former versions up to 1.00, the align mechanism in tabulars has |
| 670 |
% been somehow weak because the author had to repeat the \cs{numprint} |
| 671 |
% call in every table cell. |
| 672 |
% This has been improved in version~1.10. |
| 673 |
% For compatibility reasons, the old column types |n| and |N| have |
| 674 |
% been preserved if you specify the |oldcolumntypes| package option; |
| 675 |
% they will be discussed in section~{sec:column:old}. |
| 676 |
% |
| 677 |
% |
| 678 |
% \subsection{The new column types}% |
| 679 |
% \label{sec:column:new}% |
| 680 |
% |
| 681 |
% \DescribeMacro{column type n} |
| 682 |
% The |numprint| package provides the column type |n| that takes two |
| 683 |
% mandatory arguments. |
| 684 |
% They define the number of digits before and the number of digits |
| 685 |
% after the decimal sign. |
| 686 |
% The results can be seen in the left column of the tabular below. |
| 687 |
% You can use this column type as the normal column types, e.g., |
| 688 |
% \begin{verbatim} |
| 689 |
% \begin{tabular}{n{3}{4}n{4}{2}}\end{verbatim} |
| 690 |
% The numbers are printed in a reserved space with the necessary width |
| 691 |
% for the specified numbers, aligned at the decimal sign. |
| 692 |
% If a column contains numbers that have an exponent it is appended |
| 693 |
% left-aligned while the width of the column is extended by the |
| 694 |
% required space. |
| 695 |
% This is shown in the first column in the example below. |
| 696 |
% |
| 697 |
% If you, in addition, want to reserve space for digits in the |
| 698 |
% exponent you can insert one (specify numbers of digits before the |
| 699 |
% decimal sign) or two (number of digits before and after the decimal |
| 700 |
% sign) optional arguments, as can be seen in columns 2 and 3 in the |
| 701 |
% example below. |
| 702 |
% If you reserve space for the exponent, too long exponents may exceed |
| 703 |
% the tabular cell (as can be seen in the second column). |
| 704 |
% |
| 705 |
% This example tabular\footnote{The tabulars are ugly here. But the |
| 706 |
% only important thing is to show the effects of the alignments.} |
| 707 |
%\par\medskip\noindent |
| 708 |
% {\tabcolsep0mm\small |
| 709 |
% \begin{tabular}{|n{5}{3}|n[3]{5}{3}|n[3][1]{5}{3}|N{5}{3}|} |
| 710 |
% \hline |
| 711 |
% 123.45e12& 123.45e12& 123.45e12& 123.45e12 \\ |
| 712 |
% 12345.678e123& 12345.678e123& 12345.678e123& 12345.678e123 \\ |
| 713 |
% 123.45e12.3& 123.45e12.3& 123.45e12.3& 123.45e12.3 \\ |
| 714 |
% 12345.678e123.3& 12345.678e123.3& 12345.678e123.3& 12345.678e123.3 \\ |
| 715 |
% \hline |
| 716 |
% \end{tabular}} |
| 717 |
% \par\medskip\noindent |
| 718 |
% is produced by the following code: |
| 719 |
% \begin{verbatim} |
| 720 |
%\tabcolsep0mm\small |
| 721 |
%\begin{tabular}{|n{5}{3}|n[3]{5}{3}|n[3][1]{5}{3}|N{5}{3}|} |
| 722 |
% \hline |
| 723 |
% 123.45e12& 123.45e12& 123.45e12 & 123.45e12 \\ |
| 724 |
% 12345.678e123& 12345.678e123& 12345.678e123& 12345.678e123 \\ |
| 725 |
% 123.45e12.3& 123.45e12.3& 123.45e12.3& 123.45e12.3 \\ |
| 726 |
% 12345.678e123.3& 12345.678e123.3& 12345.678e123.3& 12345.678e123.3 \\ |
| 727 |
% \hline |
| 728 |
%\end{tabular}\end{verbatim} |
| 729 |
% The |n| column type prints the number in math mode. |
| 730 |
% Thus, the first three columns in the example are printed with lining |
| 731 |
% figures. |
| 732 |
% \DescribeMacro{column type N} |
| 733 |
% To print numbers in text mode, you can use the |N| column type as |
| 734 |
% shown in column four of the tabular.\footnote{If you use a tabular |
| 735 |
% environment that prints its arguments in math mode, e.g., the |
| 736 |
% \texttt{array} environment, also \texttt{N} prints the numbers in |
| 737 |
% math mode.} |
| 738 |
% It takes the same arguments as the |n| column type. |
| 739 |
% |
| 740 |
% You may put additional text into tabular cells. |
| 741 |
% The numprint package uses an algorithm to determine which part is |
| 742 |
% the number and which is additional text. |
| 743 |
% In order to preserve spaces and to use characters as text that could |
| 744 |
% also be part of a number (e.g., digits or the characters ``e'', |
| 745 |
% ``E'', ``d'', or ``D'') you have to enclose the text in |
| 746 |
% braces, for example ``\texttt{\{hello\} 1234}'' instead of |
| 747 |
% ``\texttt{hello 1234}''. |
| 748 |
% (In some rare cases, even two pairs of braces is necessary. |
| 749 |
% This is the case if you want to use a single character that may also |
| 750 |
% be used in a number, e.g., ``\texttt{\{\{3\}\} |
| 751 |
% 1234}''.\footnote{It is the same if the text starts with one of some |
| 752 |
% special commands that normally don't occur at the beginning of |
| 753 |
% tabular cells, \cs{end}, \cs{tabularnewline}, \cs{nprt@end}, |
| 754 |
% \cs{endtabular}, \cs{csname}, and \cs{relax}.}) |
| 755 |
% If you don't use these enclosing braces strange results may appear. |
| 756 |
% For preceding text, you have to ensure that it has the same width |
| 757 |
% for all lines of the same column. |
| 758 |
% Have a look at the following example: |
| 759 |
%\begin{verbatim} |
| 760 |
%\begin{tabular}{n{2}{1}n{2}{1}n{2}{1}n[1]{2}{1}} |
| 761 |
% \toprule |
| 762 |
% {without braces}& |
| 763 |
% {with braces}& |
| 764 |
% {with braces and box}& |
| 765 |
% \multicolumn{1}{l}{with braces, exp, and box} |
| 766 |
% \\ |
| 767 |
% \midrule |
| 768 |
% abc def 12,3e3 rt& |
| 769 |
% {abc def } 12,3e3 { rt}& |
| 770 |
% {\npmakebox[abc def ][l]{abc def }} 12,3e3 { rt}& |
| 771 |
% {\npmakebox[abc def ][l]{abc def }} 12,3e3 { rt} |
| 772 |
% \\ |
| 773 |
% more 45,1 txt& |
| 774 |
% {more } 45,1 { txt}& |
| 775 |
% {\npmakebox[abc def ][l]{more }} 45,1 { txt}& |
| 776 |
% {\npmakebox[abc def ][l]{more }} 45,1 { txt} |
| 777 |
% \\ |
| 778 |
% \midrule |
| 779 |
% not blue 45,1 txt& |
| 780 |
% {\color{blue}blue } 45,1 { txt}& |
| 781 |
% {\color{blue}\npmakebox[abc def ][l]{blue }} 45,1 { txt}& |
| 782 |
% {\color{blue}\npmakebox[abc def ][l]{blue }} 45,1 { txt} |
| 783 |
% \\ |
| 784 |
% \bottomrule |
| 785 |
%\end{tabular} |
| 786 |
%\end{verbatim} |
| 787 |
% The result looks as follows: |
| 788 |
% \par\medskip\noindent |
| 789 |
%{\footnotesize |
| 790 |
%\begin{tabular}{n{2}{1}n{2}{1}n{2}{1}n[1]{2}{1}} |
| 791 |
% \toprule |
| 792 |
% {without braces}& |
| 793 |
% {with braces}& |
| 794 |
% {with braces and box}& |
| 795 |
% \multicolumn{1}{l}{with braces, exp, and box} |
| 796 |
% \\ |
| 797 |
% \midrule |
| 798 |
% abc def 12,3e3 rt& |
| 799 |
% {abc def } 12,3e3 { rt}& |
| 800 |
% {\npmakebox[abc def ][l]{abc def }} 12,3e3 { rt}& |
| 801 |
% {\npmakebox[abc def ][l]{abc def }} 12,3e3 { rt} |
| 802 |
% \\ |
| 803 |
% more 45,1 txt& |
| 804 |
% {more } 45,1 { txt}& |
| 805 |
% {\npmakebox[abc def ][l]{more }} 45,1 { txt}& |
| 806 |
% {\npmakebox[abc def ][l]{more }} 45,1 { txt} |
| 807 |
% \\ |
| 808 |
% \midrule |
| 809 |
% not blue 45,1 txt& |
| 810 |
% {\color{blue}blue } 45,1 { txt}& |
| 811 |
% {\color{blue}\npmakebox[abc def ][l]{blue }} 45,1 { txt}& |
| 812 |
% {\color{blue}\npmakebox[abc def ][l]{blue }} 45,1 { txt} |
| 813 |
% \\ |
| 814 |
% \bottomrule |
| 815 |
%\end{tabular}} |
| 816 |
% \par\medskip\noindent |
| 817 |
% In the first column, the texts before and after the number are |
| 818 |
% not enlosed by braces. |
| 819 |
% Then, strange results appear: |
| 820 |
% In the first line, ``\texttt{de}'' is interpreted as number. |
| 821 |
% Thus, it is printed in math mode, and the rest of the cell, |
| 822 |
% ``\texttt{f 12,3e3 rt}'' is printed as text, again. |
| 823 |
% In the second line, the part ``\texttt{e 45,1}'' is printed as |
| 824 |
% number. |
| 825 |
% |
| 826 |
% This strange behaviour can be avoided by enclosing the texts by |
| 827 |
% braces, as mentioned above and shown in the second column. |
| 828 |
% Thus, the texts are printed correctly. |
| 829 |
% A space in the enclosed texts can separate the text from the number, |
| 830 |
% as done in the example. |
| 831 |
% Since the left texts have different widths the alignment of the |
| 832 |
% numbers is broken, here. |
| 833 |
% |
| 834 |
% This can be fixed by putting the contents in boxes, using the |
| 835 |
% \cs{makebox} or \cs{npmakebox} command, as shown in the third |
| 836 |
% column. |
| 837 |
% \DescribeMacro{\npmakebox} |
| 838 |
% The \cs{npmakebox} has a similar syntax as the \cs{makebox} command |
| 839 |
% but uses a text instead of a length to determine the width of the |
| 840 |
% box: \cs{npmakebox\oarg{text 1}\oarg{justification}\marg{text 2}}. |
| 841 |
% The command determines which width \meta{text 1} would have and |
| 842 |
% typesets \meta{text 2} into a box of this width. |
| 843 |
% |
| 844 |
% If you put the preceding text in each line in such a box the number |
| 845 |
% will be aligned as desired. |
| 846 |
% |
| 847 |
% Still, the text on the right-hand side of the numbers is not |
| 848 |
% aligned. |
| 849 |
% This can be fixed by specifying the number of digits of the |
| 850 |
% exponent, as shown in the fourth column. |
| 851 |
% |
| 852 |
% The third line is a little bit different from the others. |
| 853 |
% Here, not only text is inserted but also a command that changes the |
| 854 |
% output of the numbers. |
| 855 |
% Even such commands have to be enclosed by braces. |
| 856 |
% |
| 857 |
% \DescribeMacro{\multicolumn} |
| 858 |
% For producing tabular cells that don't contain a number, you either |
| 859 |
% have to enclose the cell contents by braces or to use the |
| 860 |
% \cs{multicolumn} command as shown in the first line of the example |
| 861 |
% above. |
| 862 |
% |
| 863 |
% If you want to print a line in bold letters using the \cs{boldmath} |
| 864 |
% command in math resp.\ \cs{bfseries} in text mode the alignment is |
| 865 |
% not correct anymore. |
| 866 |
% This is due to the fact that the bold letters are wider than the |
| 867 |
% normal ones. |
| 868 |
% You can avoid that problem if the font family provides a bold font |
| 869 |
% shape that has the same width as the normal one. |
| 870 |
% For the Computer Modern fonts, such a font shape exists. |
| 871 |
% In text mode, you can access it by using |
| 872 |
% \changes{1.10}{2003/10/12}{Define math version \texttt{npbold}}% |
| 873 |
% \begin{verbatim} |
| 874 |
% \fontseries{b}\selectfont\end{verbatim} |
| 875 |
% \DescribeMacro{\mathversion} |
| 876 |
% \DescribeMacro{\npboldmath} |
| 877 |
% If you also want to use that font in math mode, you may use the math |
| 878 |
% version |npbold| by using \cs{mathversion\{npbold\}} or |
| 879 |
% \cs{npboldmath}. |
| 880 |
% In order to save memory, these commands and the |npbold| math |
| 881 |
% version are only available if you call |numprint.sty| using the |
| 882 |
% |boldmath| package option. |
| 883 |
% |
| 884 |
% An example: |
| 885 |
% \begin{verbatim} |
| 886 |
%\begin{tabular}{lN{12}{3}n{12}{3}} |
| 887 |
% \toprule |
| 888 |
% normal:& |
| 889 |
% 123456123456.123e12& |
| 890 |
% 123456123456.123e12 |
| 891 |
% \\ |
| 892 |
% bold:& |
| 893 |
% {\fontseries{b}\selectfont} 123456123456.123e12& |
| 894 |
% {\npboldmath} 123456123456.123e12 |
| 895 |
% \\ |
| 896 |
% bold extended:& |
| 897 |
% {\bfseries} 123456123456.123e12& |
| 898 |
% {\boldmath} 123456123456.123e12 |
| 899 |
% \\ |
| 900 |
% \bottomrule |
| 901 |
%\end{tabular}\end{verbatim} |
| 902 |
% This produces: |
| 903 |
% \par\medskip\noindent |
| 904 |
%{\small |
| 905 |
%\begin{tabular}{lN{12}{3}n{12}{3}} |
| 906 |
% \toprule |
| 907 |
% normal:& |
| 908 |
% 123456123456.123e12& |
| 909 |
% 123456123456.123e12 |
| 910 |
% \\ |
| 911 |
% bold:& |
| 912 |
% {\fontseries{b}\selectfont} 123456123456.123e12& |
| 913 |
% {\npboldmath} 123456123456.123e12 |
| 914 |
% \\ |
| 915 |
% bold extended:& |
| 916 |
% {\bfseries} 123456123456.123e12& |
| 917 |
% {\boldmath} 123456123456.123e12 |
| 918 |
% \\ |
| 919 |
% \bottomrule |
| 920 |
%\end{tabular}} |
| 921 |
%\par\medskip |
| 922 |
% |
| 923 |
% If you want to add the same text or commands to all lines of a |
| 924 |
% tabular column, you can use the ``|>|'' specifier in the declaration |
| 925 |
% of the tabular column, as usual. |
| 926 |
% You have to enclose its argument in an additional pair of braces, as |
| 927 |
% shown in the example below. |
| 928 |
% Unfortunately, the ``|<|'' specifier does not work properly. |
| 929 |
% \DescribeMacro{\npafternum} |
| 930 |
% Therefore, the \cs{npafternum} command is defined that takes one |
| 931 |
% argument which is printed after the number. |
| 932 |
% The following example shows text before and after the number: |
| 933 |
% \begin{verbatim} |
| 934 |
%\begin{tabular}{% |
| 935 |
% >{{before \npafternum{ after}}}n[2]{12}{3}% |
| 936 |
% >{{\nprounddigits{4}}}n{3}{4}% |
| 937 |
% >{{\color{blue}}}n{12}{3}} |
| 938 |
% \toprule |
| 939 |
% 123456123456.123e12& |
| 940 |
% 12.12345& |
| 941 |
% 123456.23e1 |
| 942 |
% \\ |
| 943 |
% 12345.123e12& |
| 944 |
% 12.1& |
| 945 |
% 14561234.562e12 |
| 946 |
% \\ |
| 947 |
% \bottomrule |
| 948 |
%\end{tabular}\end{verbatim} |
| 949 |
% This produces: |
| 950 |
% \par\medskip\noindent |
| 951 |
%{\small |
| 952 |
%\begin{tabular}{% |
| 953 |
% >{{before \npafternum{ after}}}n[2]{12}{3}% |
| 954 |
% >{{\nprounddigits{3}}}n{3}{3}% |
| 955 |
% >{{\color{blue}}}n{8}{3}} |
| 956 |
% \toprule |
| 957 |
% 123456123456.123e12& |
| 958 |
% 12.12353& |
| 959 |
% 123456.23e1 |
| 960 |
% \\ |
| 961 |
% 12345.123e12& |
| 962 |
% 12.1& |
| 963 |
% 14561234.562e12 |
| 964 |
% \\ |
| 965 |
% \bottomrule |
| 966 |
%\end{tabular}} |
| 967 |
%\par\medskip |
| 968 |
% As can be seen in the second column, numbers can be rounded in |
| 969 |
% special columns by inserting \cs{nproundigits} into a ``|>|'' |
| 970 |
% specification. |
| 971 |
% This can be said for all other commands that influence the format of |
| 972 |
% numbers, too. |
| 973 |
% |
| 974 |
% \DescribeMacro{\npunit} |
| 975 |
% Normally, units should not be typeset in the cells of a tabular. |
| 976 |
% But if this is needed, it may be realized using the \cs{npunit} |
| 977 |
% command, as shown here: |
| 978 |
% \begin{verbatim} |
| 979 |
%\begin{tabular}{>{{\npunit{N/mm^2}}}n{5}{3}} |
| 980 |
% \toprule |
| 981 |
% 12345.123\\ |
| 982 |
% 12.12\\ |
| 983 |
% {\npunit{psi}} 234.4\\ |
| 984 |
% 4.3\\ |
| 985 |
% \bottomrule |
| 986 |
%\end{tabular}\end{verbatim} |
| 987 |
% This produces: |
| 988 |
% \par\medskip\noindent |
| 989 |
%{\small |
| 990 |
%\begin{tabular}{>{{\npunit{N/mm^2}}}n{5}{3}} |
| 991 |
% \toprule |
| 992 |
% 12345.123\\ |
| 993 |
% 12.12\\ |
| 994 |
% {\npunit{psi}} 234.4\\ |
| 995 |
% 4.3\\ |
| 996 |
% \bottomrule |
| 997 |
%\end{tabular}} |
| 998 |
%\par\medskip |
| 999 |
% |
| 1000 |
% The tabular alignment of the |numprint| package has been tested with |
| 1001 |
% the |tabular|, |tabular*|, |array|, |tabularx|~\cite{carlisle1999a}, |
| 1002 |
% and |longtable|~\cite{carlisle2000a} environments. |
| 1003 |
% It may or may not run with other packages and environments. |
| 1004 |
% |
| 1005 |
% |
| 1006 |
% \subsection{The old column types}% |
| 1007 |
% \label{sec:column:old}% |
| 1008 |
% |
| 1009 |
% \newcolumntype{m}[2]{>{\npdigits{#1}{#2}$}l<{$}}% |
| 1010 |
% \newcolumntype{M}[3]{>{\npdigits{#1}{#2}\npexponentdigits{#3}$}l<{$}}% |
| 1011 |
% |
| 1012 |
% \DescribeMacro{column type N} |
| 1013 |
% If the |oldcolumntype| package option is specified the column types |
| 1014 |
% |n| and |N| are defined differently than described in the previous |
| 1015 |
% section. |
| 1016 |
% \DescribeMacro{column type n} |
| 1017 |
% The |n| column type alignes the base number to the decimal sign, the |
| 1018 |
% |N| column type additionaly alignes the exponent. |
| 1019 |
% |
| 1020 |
% Use these commands as follows: |
| 1021 |
% \begin{verbatim} |
| 1022 |
%\tabcolsep0mm |
| 1023 |
%\begin{tabular}{|n{5}{3}|N{5}{3}{3}|} |
| 1024 |
% \hline |
| 1025 |
% \numprint{123.45e12}& \numprint{123.45e12}\\ |
| 1026 |
% \numprint{12345.678e123}& \numprint{12345.678e123}\\ |
| 1027 |
% \numprint{123.45e12.3}& \numprint{123.45e12.3}\\ |
| 1028 |
% \numprint{12345.678e123.3}& \numprint{12345.678e123.3}\\ |
| 1029 |
% \hline |
| 1030 |
%\end{tabular}\end{verbatim} |
| 1031 |
% This leads to\par\medskip\noindent |
| 1032 |
% {\tabcolsep0mm |
| 1033 |
% \begin{tabular}{|m{5}{3}|M{5}{3}{3}|} |
| 1034 |
% \hline |
| 1035 |
% \numprint{123.45e12}& \numprint{123.45e12}\\ |
| 1036 |
% \numprint{12345.678e123}& \numprint{12345.678e123}\\ |
| 1037 |
% \numprint{123.45e12.3}& \numprint{123.45e12.3}\\ |
| 1038 |
% \numprint{12345.678e123.3}& \numprint{12345.678e123.3}\\ |
| 1039 |
% \hline |
| 1040 |
% \end{tabular}} |
| 1041 |
% \medskip |
| 1042 |
% |
| 1043 |
% The first argument defines the number of digits before the decimal |
| 1044 |
% sign, the second the number after. |
| 1045 |
% In case of the type \verb|N| the third option defines the number of |
| 1046 |
% digits before the decimal sign in the exponent. |
| 1047 |
% It is not possible to define the numbers of digits after the decimal |
| 1048 |
% sign in the exponent; they are set to zero. |
| 1049 |
% Notice that the command \verb|\numprint| has to be written again in |
| 1050 |
% each tabular entry, using the old column types. |
| 1051 |
% |
| 1052 |
% |
| 1053 |
% \subsection{Alignment in normal text}% |
| 1054 |
% |
| 1055 |
% The alignment of the numbers in tabulars is realized by writing the |
| 1056 |
% number inside a box with the specified width. |
| 1057 |
% This functionality can also be used outside tabular environments. |
| 1058 |
% \DescribeMacro{\npdigits} |
| 1059 |
% The \cs{npdigits\marg{before}\marg{after}} command switches on the |
| 1060 |
% alignment of numbers printed by \cs{numprint}. |
| 1061 |
% The first argument defines the number of digits before the decimal |
| 1062 |
% sign while the second argument defines the number of digits after |
| 1063 |
% it for the mantissa. |
| 1064 |
% \DescribeMacro{\npexponentdigits} |
| 1065 |
% Since exponents are normally integer numbers the syntax of the |
| 1066 |
% corresponding \cs{npexponentdigits} command is slightly different. |
| 1067 |
% Its syntax is \cs{npexponentdigits\oarg{after}\marg{before}}. |
| 1068 |
% The mandatory argument defines the number of digits before the |
| 1069 |
% decimal sign of the exponent. |
| 1070 |
% If no optional argument is given, the number of digits after the |
| 1071 |
% decimal sign is set to zero. |
| 1072 |
% If it is given it defines the number of digits after the decimal |
| 1073 |
% sign. |
| 1074 |
% |
| 1075 |
% If the \cs{npdigits} or \cs{npexponentdigits} commands have been |
| 1076 |
% used inside a group the values are reset at the end of the group. |
| 1077 |
% \DescribeMacro{\npnodigits} |
| 1078 |
% \DescribeMacro{\npnoexponentdigits} |
| 1079 |
% Alignment can also be switched off using the \cs{npnodigits} resp.\ |
| 1080 |
% \cs{npnoexponentdigits} commands. |
| 1081 |
% |
| 1082 |
% |
| 1083 |
% \section{Error messages etc.} |
| 1084 |
% |
| 1085 |
% By default, \cs{numprint} produces an error message if the argument |
| 1086 |
% uses some invalid characters or if the number format is invalid. |
| 1087 |
% Some people use \cs{numprint} to do strange things and thus use |
| 1088 |
% invalid arguments designedly. |
| 1089 |
% These people may switch off these error messages by using the |
| 1090 |
% package option |warning|. |
| 1091 |
% |
| 1092 |
% If you want some debug messages to be written into the log file, use |
| 1093 |
% the package option |debug|. |
| 1094 |
% |
| 1095 |
% |
| 1096 |
% \section{Advanced customization}% |
| 1097 |
% \label{sec:advanced}% |
| 1098 |
% |
| 1099 |
% \subsection{Changing the output}% |
| 1100 |
% \label{sec:changing-output}% |
| 1101 |
% |
| 1102 |
% Most of the things described in this section are not necessary to be |
| 1103 |
% done by hand because the feature ``automatic language support'', |
| 1104 |
% described in section~\ref{sec:international} does this |
| 1105 |
% automatically. |
| 1106 |
% |
| 1107 |
% \subsubsection{Without the \textmd{\texttt{autolanguage}} option} |
| 1108 |
% |
| 1109 |
% \DescribeMacro{\npthousandsep}% |
| 1110 |
% \DescribeMacro{\npthousandthpartsep}% |
| 1111 |
% \DescribeMacro{\npdecimalsign}% |
| 1112 |
% \DescribeMacro{\npproductsign}% |
| 1113 |
% By using the commands |
| 1114 |
% \cs{npdecimalsign\marg{Sign}}, |
| 1115 |
% \cs{npthousandsep\marg{Separator}}, |
| 1116 |
% \cs{npthousandthpartsep\marg{Separator}}, and |
| 1117 |
% \cs{npproductsign\marg{Sign}},\footnote{These command did |
| 1118 |
% not have the |
| 1119 |
% ``np'' in older versions. This had to be changed in order to avoid |
| 1120 |
% an incompatibiliby with the french language of babel.} several |
| 1121 |
% separators and symbols can be changed, e.g., |
| 1122 |
% \begin{verbatim} |
| 1123 |
%\npdecimalsign{\ensuremath{\cdot}}\npthousandsep{,}\npproductsign{*}% |
| 1124 |
%\numprint{-123456}; \numprint{3,1415927e-3.2}\end{verbatim} |
| 1125 |
% leads to ``{\npdecimalsign{\ensuremath{\cdot}}% |
| 1126 |
% \npthousandsep{,}\npproductsign{*}% |
| 1127 |
% \numprint{-123456}; \numprint{3,1415927e-3.2}}''. |
| 1128 |
% |
| 1129 |
% The \cs{npthousandsep} both changes the separators before and after |
| 1130 |
% the decimal sign. |
| 1131 |
% If you want to use different separators, you have to call |
| 1132 |
% \cs{npthousandthpartsep} \emph{after} \cs{npthousandsep}. |
| 1133 |
% |
| 1134 |
% The separators as well as the decimal sign are typeset in the same |
| 1135 |
% mode as the number itself (math or text). |
| 1136 |
% If you want to guarantee a special mode, you have to use |
| 1137 |
% \cs{ensuremath} for math or either \cs{mbox}, \cs{textrm}, or |
| 1138 |
% \cs{text}\footnote{Provided by \texttt{amsmath}.} for text mode. |
| 1139 |
% |
| 1140 |
% The product sign, in contrast, is always printed in math mode. |
| 1141 |
% Thus, you don't have to add \cs{ensuremath} to use math commands. |
| 1142 |
% |
| 1143 |
% \DescribeMacro{\global}% |
| 1144 |
% If using these commands inside a group (|{|\ldots|}|, |
| 1145 |
% \cs{begingroup}\ldots\cs{endgroup}, or an environment) |
| 1146 |
% the behaviour of the \verb|\numprint| command is changed |
| 1147 |
% only locally (inside the current group). |
| 1148 |
% By preceding \verb|\global| the change can be made global inside a |
| 1149 |
% group. |
| 1150 |
% For example: |
| 1151 |
% \begin{verbatim} |
| 1152 |
%Local: |
| 1153 |
%\numprint{123e4}, |
| 1154 |
%{\npproductsign{\cdot}\numprint{123e4}}, |
| 1155 |
%\numprint{123e4}. |
| 1156 |
%Global: |
| 1157 |
%\numprint{123e4}, |
| 1158 |
%{\global\npproductsign{\cdot}\numprint{123e4}}, |
| 1159 |
%\numprint{123e4}\end{verbatim} |
| 1160 |
% leads to the following: |
| 1161 |
% |
| 1162 |
% \noindent Local: |
| 1163 |
% \numprint{123e4}, |
| 1164 |
% {\npproductsign{\cdot}\numprint{123e4}}, |
| 1165 |
% \numprint{123e4}. |
| 1166 |
% Global: |
| 1167 |
% \numprint{123e4}, |
| 1168 |
% {\npproductsign{\cdot}\numprint{123e4}, |
| 1169 |
% \numprint{123e4}} |
| 1170 |
% |
| 1171 |
% The current version has the following defaults: |
| 1172 |
% \begin{verbatim} |
| 1173 |
%\npthousandsep{\,} |
| 1174 |
%\npdecimalsign{,} |
| 1175 |
%\npproductsign{\cdot} |
| 1176 |
%\npunitseparator{\,}\end{verbatim} |
| 1177 |
% |
| 1178 |
% \DescribeMacro{\npunitseparator}% |
| 1179 |
% The space between the number and the unit is ``\cs{,}'' by |
| 1180 |
% default. It can be changed using the command |
| 1181 |
% \cs{npunitseparator\marg{Separator}}, |
| 1182 |
% e.g., |
| 1183 |
% \begin{verbatim} |
| 1184 |
%\npunitseparator{~}\end{verbatim} |
| 1185 |
% |
| 1186 |
% \DescribeMacro{\npdegreeseparator}% |
| 1187 |
% By default, no space is added between the number an a degree symbol. |
| 1188 |
% You may specify a separator for that using |
| 1189 |
% \cs{npdegreeseparator\marg{Separator}}. |
| 1190 |
% |
| 1191 |
% \DescribeMacro{\npcelsiusseparator}% |
| 1192 |
% By default, the same space as for normal units is added between the |
| 1193 |
% number an \textcelsius. |
| 1194 |
% You may specify a different separator for that using |
| 1195 |
% \cs{npcelsiusseparator\marg{Separator}}. |
| 1196 |
% Note that \cs{tccentigrade} is not supported by |numprint|. |
| 1197 |
% |
| 1198 |
% \DescribeMacro{\nppercentseparator}% |
| 1199 |
% By default, the same space as for normal units is added between the |
| 1200 |
% number and a percent sign. |
| 1201 |
% You may specify a different separator for that using |
| 1202 |
% \cs{nppercentseparator\marg{Separator}}. |
| 1203 |
% |
| 1204 |
% |
| 1205 |
% |
| 1206 |
% \subsubsection{With the \textmd{\texttt{autolanguage}} option}% |
| 1207 |
% \label{sec:advanced:international}% |
| 1208 |
% |
| 1209 |
% If you are using the |autolanguage| option changes made with the |
| 1210 |
% commands described in the previous section get lost at the next |
| 1211 |
% change of the language or at \cs{begin\{document\}}. |
| 1212 |
% Thus, they cannot be used with this option in the way described |
| 1213 |
% there. |
| 1214 |
% |
| 1215 |
% Thus, you have to redefine the commands that set the |
| 1216 |
% language-dependent numprint settings. |
| 1217 |
% For each known language, a command \cs{npstyle\meta{language}} is |
| 1218 |
% defined that does the changes, e.g., \cs{npstyleenglish} for |
| 1219 |
% English. |
| 1220 |
% \DescribeMacro{\npstyleenglish} |
| 1221 |
% This command is defined as follows: |
| 1222 |
% \begin{verbatim} |
| 1223 |
%\newcommand*\npstyleenglish{% |
| 1224 |
% \npthousandsep{,}% |
| 1225 |
% \npdecimalsign{.}% |
| 1226 |
% \npproductsign{\times}% |
| 1227 |
% \npunitseparator{\,}% |
| 1228 |
% \npdegreeseparator{}% |
| 1229 |
% \npcelsiusseparator{\nprt@unitsep}% |
| 1230 |
% \nppercentseparator{\nprt@unitsep}% |
| 1231 |
%}\end{verbatim} |
| 1232 |
% |
| 1233 |
% If you want to use different settings for this language, you have |
| 1234 |
% two possibilities: |
| 1235 |
% \begin{enumerate} |
| 1236 |
% \item |
| 1237 |
% Copy the definition for \cs{npstyle\meta{language}} from the style |
| 1238 |
% file and change it according to your wishes, for |
| 1239 |
% example:\footnote{Notice that you have to use \cs{renewcommand*} |
| 1240 |
% instead of \cs{newcommand*}.} |
| 1241 |
% \begin{verbatim} |
| 1242 |
%\renewcommand*\npstyleenglish{% |
| 1243 |
% \npthousandsep{,}% |
| 1244 |
% \npdecimalsign{{\cdot}}% |
| 1245 |
% \npproductsign{\times}% |
| 1246 |
% \npunitseparator{\,}% |
| 1247 |
% \npdegreeseparator{}% |
| 1248 |
% \npcelsiusseparator{\nprt@unitsep}% |
| 1249 |
% \nppercentseparator{\nprt@unitsep}% |
| 1250 |
%}\end{verbatim} |
| 1251 |
% \item |
| 1252 |
% Another way to add different settings to a language is to use |
| 1253 |
% \cs{g@addto@macro} to append commands to an existing |
| 1254 |
% \cs{npstyle\meta{language}} command, e.g., |
| 1255 |
% \begin{verbatim} |
| 1256 |
%\makeatletter |
| 1257 |
%\g@addto@macro\npstyleenglish{% |
| 1258 |
% \nppercentseparator{}% |
| 1259 |
%}% |
| 1260 |
%\makeatother\end{verbatim} |
| 1261 |
% This has the advantage that changes in the original command are not |
| 1262 |
% lost by using a copy. |
| 1263 |
% The disadvantage is that some commands may be called twice which is |
| 1264 |
% slightly slower. |
| 1265 |
% \end{enumerate} |
| 1266 |
% The changes take effect when the style command is called the next |
| 1267 |
% time; this is when the language is changed the next time or at |
| 1268 |
% \cs{begin\{document\}}. |
| 1269 |
% |
| 1270 |
% |
| 1271 |
% If the language you are using is not yet supported by |numprint| you |
| 1272 |
% may add support for it in the preamble of your document. |
| 1273 |
% |
| 1274 |
% \DescribeMacro{\npaddtolanguage} |
| 1275 |
% The simplest case is a language that uses the same settings as one |
| 1276 |
% of the languages, already supported. |
| 1277 |
% If, for instance, you want to use Danish with the same settings as |
| 1278 |
% German, you just have to add |
| 1279 |
% \begin{verbatim} |
| 1280 |
%\npaddtolanguage{danish}{german}\end{verbatim} |
| 1281 |
% to the preamble of your document. |
| 1282 |
% |
| 1283 |
% If you, instead, want to use different settings, define a |
| 1284 |
% corresponding style command. |
| 1285 |
% Let's take Danish as an example, again. |
| 1286 |
% Define a command \cs{npstyledanish} which defines |
| 1287 |
% everything you want to change against the default (I choose some |
| 1288 |
% strange values for clearness): |
| 1289 |
% \begin{verbatim} |
| 1290 |
%\newcommand*\npstyledanish{% |
| 1291 |
% \npthousandsep{.}% |
| 1292 |
% \npdecimalsign{\ensuremath{\cdot}}% |
| 1293 |
% \npproductsign{*}% |
| 1294 |
% \npunitseparator{~}% |
| 1295 |
% \npdegreeseparator{}% |
| 1296 |
% \npcelsiusseparator{\nprt@unitsep}% |
| 1297 |
% \nppercentseparator{\nprt@unitsep}% |
| 1298 |
%}\end{verbatim} |
| 1299 |
% In addition, append the call of this command to the |
| 1300 |
% language-switching command for Danish: |
| 1301 |
% \begin{verbatim} |
| 1302 |
%\npaddtolanguage{danish}{danish}\end{verbatim} |
| 1303 |
% |
| 1304 |
% |
| 1305 |
% \subsection{Changing the argument parsing}% |
| 1306 |
% \label{sec:custom-parsing}% |
| 1307 |
% |
| 1308 |
% It has been said above that thousand separators are not allowed in |
| 1309 |
% the argument of the \cs{numprint} command. |
| 1310 |
% This can be customized by the user. |
| 1311 |
% |
| 1312 |
% For most elements in the input, \cs{numprint} uses lists that |
| 1313 |
% contain the corresponding characters. |
| 1314 |
% \DescribeMacro{\nprt@dotlist} |
| 1315 |
% The macro \cs{nprt@dotlist} contains the characters interpreted as |
| 1316 |
% decimal signs. |
| 1317 |
% It is defined as followed: |
| 1318 |
% \begin{verbatim} |
| 1319 |
%\newcommand*\nprt@dotlist{.,}\end{verbatim} |
| 1320 |
% If you, for example, only want to allow the dot as decimal sign, |
| 1321 |
% redefined the list: |
| 1322 |
% \begin{verbatim} |
| 1323 |
%\renewcommand*\nprt@dotlist{.}\end{verbatim} |
| 1324 |
% If you want to do this in your document rather than in the |
| 1325 |
% configureation file \texttt{numprint.cfg}---see |
| 1326 |
% section~\ref{sec:configuration}--- you have to enclose this by |
| 1327 |
% \cs{makeatletter} and \cs{makeatother}. |
| 1328 |
% |
| 1329 |
% \DescribeMacro{\nprt@explist}% |
| 1330 |
% The \cs{nprt@explist} command contains the characters interpreted as |
| 1331 |
% delimiter between mantissa and exponent. |
| 1332 |
% By default it contains ``\texttt{eEdD}''. |
| 1333 |
% Redefine it as \cs{nprt@dotlist}. |
| 1334 |
% |
| 1335 |
% \DescribeMacro{\nprt@ignorelist}% |
| 1336 |
% The \cs{nprt@ignorelist} command contains a list of characters that |
| 1337 |
% are ignored in the input (in addition to spaces, ``\cs{,}'', and |
| 1338 |
% ``\texttt{\~}''). |
| 1339 |
% It is empty by default. |
| 1340 |
% If you, for example, only want to allow dots as decimal sign and |
| 1341 |
% commas may occur as thousand separators in the input, you may use |
| 1342 |
% following redefinition: |
| 1343 |
% \begin{verbatim} |
| 1344 |
%\renewcommand*\nprt@dotlist{.} |
| 1345 |
%\renewcommand*\nprt@ignorelist{,}\end{verbatim} |
| 1346 |
% Then, ``\texttt{,}'' is ignored in the input and ``\texttt{.}'' is |
| 1347 |
% interpreted as decimal sign. |
| 1348 |
% For example, |
| 1349 |
% \begin{verbatim} |
| 1350 |
%\makeatletter |
| 1351 |
%{\renewcommand*\nprt@dotlist{.}% |
| 1352 |
%\renewcommand*\nprt@ignorelist{,}% |
| 1353 |
%\numprint{12,234.123,45e1,2,3.0}} |
| 1354 |
%\makeatother\end{verbatim} |
| 1355 |
% leads to |
| 1356 |
% \makeatletter% |
| 1357 |
% {\def\nprt@dotlist{.}\def\nprt@ignorelist{,}``\numprint{12,234.123,45e1,2,3.0}}''. |
| 1358 |
% \makeatother |
| 1359 |
% |
| 1360 |
% \DescribeMacro{\nprt@signlist}% |
| 1361 |
% The \cs{nprt@signlist} command contains the list of known signs. |
| 1362 |
% By default, it is set to ``\texttt{+-}\cs{pm}''. |
| 1363 |
% You may change the list of accepted signs by redefining |
| 1364 |
% \cs{nprt@signlist}. |
| 1365 |
% If, for instance, the letter ``\texttt{*}'' is intended to be a |
| 1366 |
% sign, just type in |
| 1367 |
% \begin{verbatim} |
| 1368 |
%\renewcommand*\nprt@signlist{+-\pm *}\end{verbatim} |
| 1369 |
% This character is typeset when using it as sign. |
| 1370 |
% But this indicates one problem: The sign might differ between text |
| 1371 |
% and math mode, as show in the following example: |
| 1372 |
% {\makeatletter\def\nprt@signlist{+-\pm *}\makeatother |
| 1373 |
% In text mode, \cs{numprint\{*1234\}} occurs as ``\numprint{*1234}'' |
| 1374 |
% while is is typeset as ``$\numprint{*1234}$'' in math mode.} |
| 1375 |
% To avoid that, you may define a command that prints the sign. |
| 1376 |
% This command must have a name according to |
| 1377 |
% \cs{nprt@list@\meta{sign}}. |
| 1378 |
% \DescribeMacro{\nprt@sign@*}% |
| 1379 |
% In this case, you have to define \cs{nprt@list@*}. |
| 1380 |
% Since the sign might be arbitrary characters, you should define the |
| 1381 |
% command as follows: |
| 1382 |
% \begin{verbatim} |
| 1383 |
%\expandafter\newcommand\csname nprt@sign@*\endcsname{{\ensuremath{*}}}\end{verbatim} |
| 1384 |
% {\makeatletter\expandafter\def\csname nprt@sign@*\endcsname{{\ensuremath{*}}}% |
| 1385 |
% \def\nprt@signlist{+-\pm *}\makeatother |
| 1386 |
% With this command, \cs{numprint\{*1234\}} occurs as |
| 1387 |
% ``\numprint{*1234}'' in text mode and as ``$\numprint{*1234}$'' in |
| 1388 |
% math mode.} |
| 1389 |
% |
| 1390 |
% Because of this mechanism to print a sign, it is not possible to use |
| 1391 |
% other macro names than \cs{pm} for signs.\footnote{\cs{pm} is |
| 1392 |
% handled separately.} |
| 1393 |
% You have to use single characters as the shown ``\texttt{*}''. |
| 1394 |
% |
| 1395 |
% |
| 1396 |
% \section{Some tricks} |
| 1397 |
% |
| 1398 |
% \subsection{Let the signs depend on the mode} |
| 1399 |
% |
| 1400 |
% \DescribeMacro{\nprt@sign@+}% |
| 1401 |
% \DescribeMacro{\nprt@sign@-}% |
| 1402 |
% \DescribeMacro{\nprt@sign@+-}% |
| 1403 |
% The default signs are typeset in math mode independently of the mode |
| 1404 |
% the number ist printed. |
| 1405 |
% If you are using a font in which the sings of text and math mode |
| 1406 |
% differ much, this may be unsatisfactory. |
| 1407 |
% Then, you can typeset different signs for text and math mode. |
| 1408 |
% Therefore, it is used that the default signs use the same macros as |
| 1409 |
% user signs, described in section~\ref{sec:custom-parsing}. |
| 1410 |
% They are defined as follows: |
| 1411 |
% \begin{verbatim} |
| 1412 |
%\expandafter\newcommand\csname nprt@sign@+\endcsname{{\ensuremath{+}}} |
| 1413 |
%\expandafter\newcommand\csname nprt@sign@-\endcsname{{\ensuremath{-}}} |
| 1414 |
%\expandafter\newcommand\csname nprt@sign@+-\endcsname{{\ensuremath{\pm}}}\end{verbatim} |
| 1415 |
% If you, for instance, don't want to use the math minus for numbers |
| 1416 |
% in text mode but another character, you may redefine |
| 1417 |
% \cs{nprt@sign@-}: |
| 1418 |
% \begin{verbatim} |
| 1419 |
%\expandafter\renewcommand\csname nprt@sign@-\endcsname{% |
| 1420 |
% \ifmmode {-}\else {---}\fi}\end{verbatim} |
| 1421 |
%{\makeatletter\expandafter\def\csname nprt@sign@-\endcsname |
| 1422 |
% {\ifmmode {-}\else {---}\fi}\makeatother |
| 1423 |
% With this definition, \cs{numprint\{-1234\}} leads to |
| 1424 |
% ``\numprint{-1234}'' resp.\ ``$\numprint{-1234}$'' in text resp.\ |
| 1425 |
% math mode.} |
| 1426 |
% |
| 1427 |
% |
| 1428 |
% \subsection{Typing negative numbers in red}% |
| 1429 |
% \label{sec:negative-red}% |
| 1430 |
% |
| 1431 |
% If you want to print negative number in red colors, you can use the |
| 1432 |
% \cs{nprt@sign@-} command, too. |
| 1433 |
% The following example shows how to do it: |
| 1434 |
% \begin{verbatim} |
| 1435 |
%\usepackage{color} |
| 1436 |
%\makeatletter |
| 1437 |
%\expandafter\renewcommand\csname nprt@sign@-\endcsname{% |
| 1438 |
% \color{red}{\ensuremath{-}}} |
| 1439 |
%\makeatother\end{verbatim} |
| 1440 |
% With this definition, |
| 1441 |
% \begin{verbatim} |
| 1442 |
%\numprint{1234}, \numprint{-1234}, |
| 1443 |
%\numprint{1234e-123}, \numprint{-1234e123}.\end{verbatim} |
| 1444 |
% {\makeatletter\expandafter\def\csname nprt@sign@-\endcsname |
| 1445 |
% {\color{red}{\ensuremath{-}}}\makeatother |
| 1446 |
% leads to ``\numprint{1234}, \numprint{-1234}, \numprint{1234e-123}, |
| 1447 |
% \numprint{-1234e123}.''}\footnote{Whether you can see the effect in |
| 1448 |
% the output depends on the viewer; in PostScript and PDF the red |
| 1449 |
% color works, in many dvi viewers, it doesn't.} |
| 1450 |
% To avoid a negative exponent beeing printed in red for a positive |
| 1451 |
% mantissa, a hack is included in the page which is described in |
| 1452 |
% appendix~\ref{sec:code:main}, page~\pageref{page:code:color}. |
| 1453 |
% |
| 1454 |
% |
| 1455 |
% |
| 1456 |
% \subsection{Configuration file}% |
| 1457 |
% \label{sec:configuration}% |
| 1458 |
% |
| 1459 |
% If your \LaTeX\ installation provides a file \texttt{numprint.cfg} |
| 1460 |
% in the \TeX\ search path, it is loaded by \texttt{numprint.sty} as |
| 1461 |
% last action. |
| 1462 |
% Thus, you may add all changes and extensions, new languages for |
| 1463 |
% instance, into this file. |
| 1464 |
% |
| 1465 |
% |
| 1466 |
% \appendix |
| 1467 |
% |
| 1468 |
% \section{Compatiblity to older versions} |
| 1469 |
% |
| 1470 |
% In most cases, the user macros of this package (the macros not |
| 1471 |
% containing a ``|@|'' in their name) should be compatible to older |
| 1472 |
% versions. |
| 1473 |
% The parsing of the argument has been improved that some arguments of |
| 1474 |
% \cs{numprint} may be accepted or not in contrast to the older |
| 1475 |
% version. |
| 1476 |
% |
| 1477 |
% The spacing of aligned numbers has also been corrected. |
| 1478 |
% Thus, this is be incompatible to the older version if you are using |
| 1479 |
% alignment in the exponent or math environmens other than |
| 1480 |
% \cs{textstyle}. |
| 1481 |
% |
| 1482 |
% |
| 1483 |
% \section{Lists of options and commands} |
| 1484 |
% |
| 1485 |
% This section contains lists of all package options resp.\ available |
| 1486 |
% commands. |
| 1487 |
% Items that belong together and may be exclusive are printed in |
| 1488 |
% groups together. |
| 1489 |
% |
| 1490 |
% \subsection{Package options}% |
| 1491 |
% \label{sec:package-options}% |
| 1492 |
% |
| 1493 |
% \begingroup |
| 1494 |
% \newcommand*\default{$^{*}$}% |
| 1495 |
% The default values are marked by \default. |
| 1496 |
% \begin{longtable}[l]{% |
| 1497 |
% @{}>{\ttfamily}p{0.30\linewidth}@{}p{0.70\linewidth}@{}} |
| 1498 |
% warning& Produce warnings rather than error messages. \\ |
| 1499 |
% error\default& Produce error messages rather than |
| 1500 |
% warnings. \\[\medskipamount] |
| 1501 |
% autolanguage& Switch the settings language dependent.\\ |
| 1502 |
% noautolanguage\default& Fixed settings.\\[\medskipamount] |
| 1503 |
% sepfour\default& Separator for four-digit numbers.\\ |
| 1504 |
% nosepfour& No separator for four-digit numbers.\\[\medskipamount] |
| 1505 |
% addmissingzero\default& Add missings zeros before or after the |
| 1506 |
% decimal sign.\\ |
| 1507 |
% noaddmissingzero& Don't do that.\\[\medskipamount] |
| 1508 |
% addplus& Add a plus to a number without a sign.\\ |
| 1509 |
% noaddplus\default& Don't do that.\\[\medskipamount] |
| 1510 |
% addplusexponent& Add a plus to a number without a sign in |
| 1511 |
% exponents.\\ |
| 1512 |
% noaddplusexponent\default& Don't do that.\\[\medskipamount] |
| 1513 |
% oldcolumntypes& Define the old column types that need to use the |
| 1514 |
% \cs{numprint} inside the tabular.\\ |
| 1515 |
% newcolumntypes\default& Use the new column types.\\[\medskipamount] |
| 1516 |
% boldmath& Define the \texttt{npbold} math version.\\[\medskipamount] |
| 1517 |
% np& Define the shortcut \cs{np} for |
| 1518 |
% \cs{numprint}.\\[\medskipamount] |
| 1519 |
% debug& Produce debug information in the log file. |
| 1520 |
% \end{longtable} |
| 1521 |
% \endgroup |
| 1522 |
% |
| 1523 |
% \subsection{Commands} |
| 1524 |
% |
| 1525 |
% \begin{longtable}[l]{% |
| 1526 |
% @{}>{\ttfamily \char`\\}p{0.3\linewidth}@{}p{0.7\linewidth}@{}} |
| 1527 |
% npfourdigitsep& Switch on separating four-digit numbers.\\ |
| 1528 |
% npfourdigitnosep& Switch off separating four-digit |
| 1529 |
% numbers.\\[\medskipamount] |
| 1530 |
% npaddmissingzero& Switch on adding missings zeros before or after the |
| 1531 |
% decimal sign.\\ |
| 1532 |
% npnoaddmissingzero& Switch off adding missings zeros before or after |
| 1533 |
% the decimal sign.\\[\medskipamount] |
| 1534 |
% npaddplus& Add a plus to a number without a sign.\\ |
| 1535 |
% npnoaddplus& Don't do that.\\[\medskipamount] |
| 1536 |
% npaddplusexponent& Add a plus to the exponent when it has no sign.\\ |
| 1537 |
% npnoaddplusexponent& Don't do that.\\[\medskipamount] |
| 1538 |
% np& Shortcut for \cs{numprint} (only available with package |
| 1539 |
% option~\texttt{np}).\\ |
| 1540 |
% numprint& Typesets a number (the package's main |
| 1541 |
% command).\\[\medskipamount] |
| 1542 |
% npdecimalsign& Change the decimal sign.\\ |
| 1543 |
% npthousandsep& Change the thousand separator (before and after the |
| 1544 |
% decimal sign).\\ |
| 1545 |
% npthousandthpartsep& Change the thousand separator (only after the |
| 1546 |
% decimal sign).\\ |
| 1547 |
% npproductsign& Change the product sign.\\ |
| 1548 |
% npunitseparator& Change the separator between a number and a |
| 1549 |
% unit.\\ |
| 1550 |
% npdegreeseparator& Change the separator between a number and a |
| 1551 |
% degree symbol.\\[\medskipamount] |
| 1552 |
% npcelsiusseparator& Change the separator between a number and |
| 1553 |
% \textcelsius.\\[\medskipamount] |
| 1554 |
% nppercentseparator& Change the separator between a number and a |
| 1555 |
% percent sign.\\[\medskipamount] |
| 1556 |
% nprounddigits& Declare how many digits will be printed after the |
| 1557 |
% decimal sign.\\ |
| 1558 |
% npnoround& Switch off rounding and print numbers as given.\\ |
| 1559 |
% nproundexpdigits& Declare how many digits will be printed after the |
| 1560 |
% decimal sign in the exponent.\\ |
| 1561 |
% npnoroundexp& Switch off rounding for the |
| 1562 |
% exponent.\\[\medskipamount] |
| 1563 |
% nplpadding& Declare up to how many digits the number will be padded at |
| 1564 |
% the lefthand side. \\ |
| 1565 |
% npnolpadding& Switch off padding. \\[\medskipamount] |
| 1566 |
% npreplacenull& Replace the after-decimal-sign part by another text |
| 1567 |
% if it is zero.\\ |
| 1568 |
% npprintnull& Print zeros after the decimal sign.\\[\medskipamount] |
| 1569 |
% npdigits& Switch on aligned number printing with given digits before |
| 1570 |
% and after the decimal sign.\\ |
| 1571 |
% npnodigits& Print numbers in a box that is as wide as needed by the |
| 1572 |
% number.\\ |
| 1573 |
% npexponentdigits& Switch on aligned printing of the exponent.\\ |
| 1574 |
% npnoexponentdigits& Switch alignment off for the |
| 1575 |
% exponent.\\[\medskipamount] |
| 1576 |
% npaddtolanguage& Adds language definitions to the extras section |
| 1577 |
% of a \texttt{babel} language.\\ |
| 1578 |
% npstyledefault& Defines the settings in standard format.\\ |
| 1579 |
% npstylegerman& Defines the German number format.\\ |
| 1580 |
% npstyleenglish& Defines the English number |
| 1581 |
% format.\\[\medskipamount] |
| 1582 |
% npmakebox& Command similar to \cs{makebox} but with text instead |
| 1583 |
% of length in first optional argument.\\[\medskipamount] |
| 1584 |
% npboldmath& Bold math version with digits with the same width as |
| 1585 |
% normal digits.\\[\medskipamount] |
| 1586 |
% npafternum& Puts text after the number in |
| 1587 |
% tabulars.\\[\medskipamount] |
| 1588 |
% npunit& Sets the unit in tabulars.\\[\medskipamount] |
| 1589 |
% \end{longtable} |
| 1590 |
% |
| 1591 |
% \section{Known bugs} |
| 1592 |
% |
| 1593 |
% \begin{itemize} |
| 1594 |
% \item When aligning the exponent for tabulars, the distance between |
| 1595 |
% the ``10'' and the exponent is too small. |
| 1596 |
% \item Printing negative numbers in red does not work. |
| 1597 |
% Only the minus sign is printed in red. |
| 1598 |
% When was this bug introduced? |
| 1599 |
% \end{itemize} |
| 1600 |
% |
| 1601 |
% \section{To do} |
| 1602 |
% |
| 1603 |
% \begin{itemize} |
| 1604 |
% \item Add more languages to the automatic international support. |
| 1605 |
% \item Add support for ``|<|'' in tabular definitions. |
| 1606 |
% \item Avoid many of the temporary variables. |
| 1607 |
% \item Add support for numbers in tabulars that are right aligned or |
| 1608 |
% centered. |
| 1609 |
% \end{itemize} |
| 1610 |
% |
| 1611 |
% \section{Acknowledgements} |
| 1612 |
% |
| 1613 |
% \begin{itemize} |
| 1614 |
% \item |
| 1615 |
% Tilman Finke, had the idea of rounding numbers. |
| 1616 |
% \item |
| 1617 |
% Stephan Helma has implemented padding numbers on the left side. |
| 1618 |
% This function has been slightly changed by me. |
| 1619 |
% \item |
| 1620 |
% Portuguese support by Vilar Camara Neto and Luis. |
| 1621 |
% \item |
| 1622 |
% Dutch support by Ralph Hendriks. |
| 1623 |
% \item |
| 1624 |
% French support by Daniel Flipo. |
| 1625 |
% \item |
| 1626 |
% Ignacio Fern\'andez Galv\'an has reported a couple of bugs and |
| 1627 |
% suggestions (which parly still have to be implemented\ldots) |
| 1628 |
% \end{itemize} |
| 1629 |
% |
| 1630 |
% \begin{thebibliography}{1} |
| 1631 |
% \bibitem{carlisle1999a} |
| 1632 |
% Carlisle, David: \emph{The \texttt{tabularx} package}, |
| 1633 |
% version~2.07, 1999.\newblock |
| 1634 |
% \url{CTAN:macros/latex/contrib/tabularx/}. |
| 1635 |
% \bibitem{carlisle2000a} |
| 1636 |
% Carlisle, David: \emph{The \texttt{longtable} package}, |
| 1637 |
% version~4.10, 2000.\newblock |
| 1638 |
% \url{CTAN:macros/latex/contrib/longtable/}. |
| 1639 |
% \bibitem{guthoehrlein2000a} |
| 1640 |
% Guth\"ohrlein, Eckhart: \emph{The \texttt{rccol} package}, |
| 1641 |
% version~1.1a, 2000.\newblock |
| 1642 |
% \url{CTAN:macros/latex/contrib/rccol/}. |
| 1643 |
% \end{thebibliography} |
| 1644 |
% |
| 1645 |
% \StopEventually{\PrintChanges \PrintIndex} |
| 1646 |
% |
| 1647 |
% \section{The implementation} |
| 1648 |
% \iffalse |
| 1649 |
%<*package> |
| 1650 |
% \fi |
| 1651 |
% Heading of the package: |
| 1652 |
% \begin{macrocode} |
| 1653 |
\NeedsTeXFormat{LaTeX2e} |
| 1654 |
\ProvidesPackage{numprint} |
| 1655 |
[2012/08/20 v1.39 Print numbers (HH)] |
| 1656 |
% \end{macrocode} |
| 1657 |
% |
| 1658 |
% \subsection{Load packages} |
| 1659 |
% |
| 1660 |
% \changes{1.33}{2004/11/19}{Avoid to use the \texttt{calc} package |
| 1661 |
% since it causes problems with many other packages}% |
| 1662 |
% |
| 1663 |
% Load package array.sty for the new column types. |
| 1664 |
% \begin{macrocode} |
| 1665 |
\RequirePackage{array} |
| 1666 |
% \end{macrocode} |
| 1667 |
% \changes{1.10}{2003/10/12}{Avoid use of \texttt{substr} package}% |
| 1668 |
% |
| 1669 |
% \subsection{Package options and settings} |
| 1670 |
% |
| 1671 |
% Define a boolean if the first digit is separated in a four digit |
| 1672 |
% number. Default is true for compatibility with older versions. |
| 1673 |
% \begin{macrocode} |
| 1674 |
\newif\ifnprt@numsepfour |
| 1675 |
% \end{macrocode} |
| 1676 |
% Show warnings or errors? |
| 1677 |
% \begin{macrocode} |
| 1678 |
\newif\ifnprt@errormessage |
| 1679 |
% \end{macrocode} |
| 1680 |
% Add missing zeros? |
| 1681 |
% \begin{macrocode} |
| 1682 |
\newif\ifnprt@addmissingzero |
| 1683 |
% \end{macrocode} |
| 1684 |
% Add missing plus signs? |
| 1685 |
% \begin{macrocode} |
| 1686 |
\newif\ifnprt@addplus@mantissa |
| 1687 |
\newif\ifnprt@addplus@exponent |
| 1688 |
% \end{macrocode} |
| 1689 |
% Switch the style depending on the language automatically? |
| 1690 |
% \begin{macrocode} |
| 1691 |
\newif\ifnprt@autolanguage |
| 1692 |
% \end{macrocode} |
| 1693 |
% Old or new column types? |
| 1694 |
% \begin{macrocode} |
| 1695 |
\newif\ifnprt@newcolumntype |
| 1696 |
% \end{macrocode} |
| 1697 |
% Declare new math type? |
| 1698 |
% \begin{macrocode} |
| 1699 |
\newif\ifnprt@npbold |
| 1700 |
% \end{macrocode} |
| 1701 |
% \begin{macro}{\npfourdigitsep} |
| 1702 |
% Switch separating of the fourth digit on. |
| 1703 |
% \begin{macrocode} |
| 1704 |
\newcommand*\npfourdigitsep{\nprt@numsepfourtrue}% |
| 1705 |
% \end{macrocode} |
| 1706 |
% \end{macro} |
| 1707 |
% \begin{macro}{\npfourdigitnosep} |
| 1708 |
% Switch separating of the fourth digit off. |
| 1709 |
% \begin{macrocode} |
| 1710 |
\newcommand*\npfourdigitnosep{\nprt@numsepfourfalse}% |
| 1711 |
% \end{macrocode} |
| 1712 |
% \end{macro} |
| 1713 |
% \begin{macro}{\npaddmissingzero} |
| 1714 |
% Add a missing zero before or after decimalsign. |
| 1715 |
% \begin{macrocode} |
| 1716 |
\newcommand*\npaddmissingzero{\nprt@addmissingzerotrue}% |
| 1717 |
% \end{macrocode} |
| 1718 |
% \end{macro} |
| 1719 |
% \begin{macro}{\npnoaddmissingzero} |
| 1720 |
% Don't add a missing zero before or after decimalsign. |
| 1721 |
% \begin{macrocode} |
| 1722 |
\newcommand*\npnoaddmissingzero{\nprt@addmissingzerofalse}% |
| 1723 |
% \end{macrocode} |
| 1724 |
% \end{macro} |
| 1725 |
% \begin{macro}{\npaddplus} |
| 1726 |
% Add a plus to the mantissa if no sign is given. |
| 1727 |
% \begin{macrocode} |
| 1728 |
\newcommand*\npaddplus{\nprt@addplus@mantissatrue}% |
| 1729 |
% \end{macrocode} |
| 1730 |
% \end{macro} |
| 1731 |
% \begin{macro}{\npnoaddplus} |
| 1732 |
% Don't add a plus to the mantissa if no sign is given. |
| 1733 |
% \begin{macrocode} |
| 1734 |
\newcommand*\npnoaddplus{\nprt@addplus@mantissafalse}% |
| 1735 |
% \end{macrocode} |
| 1736 |
% \end{macro} |
| 1737 |
% \begin{macro}{\npaddplusexponent} |
| 1738 |
% Add a plus to the exponent if no sign is given. |
| 1739 |
% \begin{macrocode} |
| 1740 |
\newcommand*\npaddplusexponent{\nprt@addplus@exponenttrue}% |
| 1741 |
% \end{macrocode} |
| 1742 |
% \end{macro} |
| 1743 |
% \begin{macro}{\npnoaddplusexponent} |
| 1744 |
% Don't add a plus to the exponent if no sign is given. |
| 1745 |
% \begin{macrocode} |
| 1746 |
\newcommand*\npnoaddplusexponent{\nprt@addplus@exponentfalse}% |
| 1747 |
% \end{macrocode} |
| 1748 |
% \end{macro} |
| 1749 |
% Declare options. \verb|nosepfour| switches seperating of the fourth |
| 1750 |
% digit off, \verb|sepfour| switches it on. Default is on four |
| 1751 |
% compatibility reasons with older versions. |
| 1752 |
% \begin{macrocode} |
| 1753 |
\DeclareOption{nosepfour}{\npfourdigitnosep} |
| 1754 |
\DeclareOption{sepfour}{\npfourdigitsep} |
| 1755 |
% \end{macrocode} |
| 1756 |
% Add missing zeros after decimal sign? |
| 1757 |
% \begin{macrocode} |
| 1758 |
\DeclareOption{noaddmissingzero}{\npnoaddmissingzero} |
| 1759 |
\DeclareOption{addmissingzero}{\npaddmissingzero} |
| 1760 |
% \end{macrocode} |
| 1761 |
% Add a plus sign to the mantissa if no sign is given? |
| 1762 |
% \begin{macrocode} |
| 1763 |
\DeclareOption{noaddplus}{\npnoaddplus} |
| 1764 |
\DeclareOption{addplus}{\npaddplus} |
| 1765 |
% \end{macrocode} |
| 1766 |
% Add a plus sign to the exponent if no sign is given? |
| 1767 |
% \begin{macrocode} |
| 1768 |
\DeclareOption{noaddplusexponent}{\npnoaddplusexponent} |
| 1769 |
\DeclareOption{addplusexponent}{\npaddplusexponent} |
| 1770 |
% \end{macrocode} |
| 1771 |
% Add missing zeros after decimal sign? |
| 1772 |
% \begin{macrocode} |
| 1773 |
\DeclareOption{noautolanguage}{\nprt@autolanguagefalse} |
| 1774 |
\DeclareOption{autolanguage}{\nprt@autolanguagetrue} |
| 1775 |
% \end{macrocode} |
| 1776 |
% \begin{macro}{\np} |
| 1777 |
% \changes{1.00}{2003/10/07}{Add shortcut for \cs{numprint}}% |
| 1778 |
% Define a shortcut for the \cs{numprint} command? |
| 1779 |
% \begin{macrocode} |
| 1780 |
\DeclareOption{np}{\newcommand*\np{\numprint}} |
| 1781 |
% \end{macrocode} |
| 1782 |
% \end{macro} |
| 1783 |
% Produce warnings or errors? |
| 1784 |
% \begin{macrocode} |
| 1785 |
\DeclareOption{oldcolumntypes}{\nprt@newcolumntypefalse} |
| 1786 |
\DeclareOption{newcolumntypes}{\nprt@newcolumntypetrue} |
| 1787 |
% \end{macrocode} |
| 1788 |
% Declare new math type? |
| 1789 |
% \begin{macrocode} |
| 1790 |
\DeclareOption{boldmath}{\nprt@npboldtrue} |
| 1791 |
% \end{macrocode} |
| 1792 |
% Produce warnings or errors? |
| 1793 |
% \begin{macrocode} |
| 1794 |
\DeclareOption{warning}{\nprt@errormessagefalse} |
| 1795 |
\DeclareOption{error}{\nprt@errormessagetrue} |
| 1796 |
% \end{macrocode} |
| 1797 |
% Generate some debug information to the log file? |
| 1798 |
% \begin{macrocode} |
| 1799 |
\newcommand*\nprt@debug[1]{} |
| 1800 |
\DeclareOption{debug}{% |
| 1801 |
\renewcommand*\nprt@debug[1]{\PackageInfo{numprint}{#1}}% |
| 1802 |
} |
| 1803 |
% \end{macrocode} |
| 1804 |
% Execute default options and the given options. |
| 1805 |
% \begin{macrocode} |
| 1806 |
\ExecuteOptions{sepfour,addmissingzero,error,noautolanguage,newcolumntypes} |
| 1807 |
\ProcessOptions\relax |
| 1808 |
% \end{macrocode} |
| 1809 |
% Define commands to change the output of the \verb|\numprint| |
| 1810 |
% command. |
| 1811 |
% |
| 1812 |
% \begin{macro}{\npdecimalsign} |
| 1813 |
% Change the decimal sign. In English it is normally ``.'', in German |
| 1814 |
% ``,''. |
| 1815 |
% The additional pair of braces \verb|{}| prevents from inserting |
| 1816 |
% additional space in math mode, e.g., $1,2$ versus $1{,}2$. |
| 1817 |
% \begin{macrocode} |
| 1818 |
\newcommand*\npdecimalsign[1]{\def\nprt@decimal{{#1}}} |
| 1819 |
% \end{macrocode} |
| 1820 |
% \end{macro} |
| 1821 |
% \begin{macro}{\npthousandsep} |
| 1822 |
% Change the thousand separator. In English it often is ``,'', in |
| 1823 |
% German ``.'' or ``\,'' (\verb|\,|). |
| 1824 |
% Here again the additional \verb|{}| is used as above. |
| 1825 |
% This command changes both the sign before and after the decimal |
| 1826 |
% sign. |
| 1827 |
% If you want a different sign after the comma you have to call |
| 1828 |
% \verb|\npthousandthpartsep| after \verb|\npthousandsep|. |
| 1829 |
% \begin{macrocode} |
| 1830 |
\newcommand*\npthousandsep[1]{\def\nprt@separator@before{{#1}}% |
| 1831 |
\def\nprt@separator@after{{#1}}} |
| 1832 |
% \end{macrocode} |
| 1833 |
% \end{macro}% |
| 1834 |
% \begin{macro}{\npthousandthpartsep} |
| 1835 |
% Change the thousand separator after the decismal sign. |
| 1836 |
% \begin{macrocode} |
| 1837 |
\newcommand*\npthousandthpartsep[1]{\def\nprt@separator@after{{#1}}} |
| 1838 |
% \end{macrocode} |
| 1839 |
% \end{macro} |
| 1840 |
% \begin{macro}{\npproductsign} |
| 1841 |
% Change the product sign that is printed in numbers with exponent |
| 1842 |
% like $\numprint{123e4}$. Normally it is \verb|\cdot|. In American |
| 1843 |
% texts sometimes \verb|\times|. |
| 1844 |
% The two pairs of braces \verb|{}| ensure the correct spacing on the |
| 1845 |
% left and right side of the product sign, e.g., 3$\cdot$4 versus |
| 1846 |
% 3${}\cdot{}$4. |
| 1847 |
% \begin{macrocode} |
| 1848 |
\newcommand*\npproductsign[1]{\def\nprt@prod{\ensuremath{{}#1{}}}} |
| 1849 |
% \end{macrocode} |
| 1850 |
% \end{macro} |
| 1851 |
% \begin{macro}{\npunitseparator} |
| 1852 |
% Change the separator between number and unit. |
| 1853 |
% Here again the additional \verb|{}| is used as above. |
| 1854 |
% \begin{macrocode} |
| 1855 |
\newcommand*\npunitseparator[1]{\def\nprt@unitsep{{#1}}} |
| 1856 |
% \end{macrocode} |
| 1857 |
% \end{macro} |
| 1858 |
% \begin{macro}{\npdegreeseparator} |
| 1859 |
% Change the separator between number and \textdegree. |
| 1860 |
% Here again the additional \verb|{}| is used as above. |
| 1861 |
% \begin{macrocode} |
| 1862 |
\newcommand*\npdegreeseparator[1]{\def\nprt@degreesep{{#1}}} |
| 1863 |
% \end{macrocode} |
| 1864 |
% \end{macro} |
| 1865 |
% \begin{macro}{\npcelsiusseparator} |
| 1866 |
% Change the separator between number and \textcelsius. |
| 1867 |
% Here again the additional \verb|{}| is used as above. |
| 1868 |
% \begin{macrocode} |
| 1869 |
\newcommand*\npcelsiusseparator[1]{\def\nprt@celsiussep{{#1}}} |
| 1870 |
% \end{macrocode} |
| 1871 |
% \end{macro} |
| 1872 |
% \begin{macro}{\nppercentseparator} |
| 1873 |
% Change the separator between number and \%. |
| 1874 |
% Here again the additional \verb|{}| is used as above. |
| 1875 |
% \begin{macrocode} |
| 1876 |
\newcommand*\nppercentseparator[1]{\def\nprt@percentsep{{#1}}} |
| 1877 |
% \end{macrocode} |
| 1878 |
% \end{macro} |
| 1879 |
% \begin{macro}{\nprt@fillnull} |
| 1880 |
% Defines command |#1| with a number of |#2| zeros filled. |
| 1881 |
% This should reside in Sect.~\ref{sec:code:round} but is called |
| 1882 |
% before. |
| 1883 |
% \begin{macrocode} |
| 1884 |
\def\nprt@fillnull#1#2{% |
| 1885 |
\@tempcnta=-1 |
| 1886 |
\loop |
| 1887 |
\g@addto@macro{#1}{0}% |
| 1888 |
\advance\@tempcnta by 1 |
| 1889 |
\ifnum\@tempcnta<#2 |
| 1890 |
\repeat |
| 1891 |
} |
| 1892 |
% \end{macrocode} |
| 1893 |
% \end{macro} |
| 1894 |
% \begin{macro}{\nprounddigits} |
| 1895 |
% Define a command that sets a count of digits after which the number |
| 1896 |
% is rounded. |
| 1897 |
% This command defines \cs{nprt@rounddigits} that stores the count and |
| 1898 |
% \cs{nprt@roundnull} that contains of \cs{nprt@rounddigits} ``0'' |
| 1899 |
% digits. |
| 1900 |
% \begin{macrocode} |
| 1901 |
\newcommand\nprounddigits[1]{% |
| 1902 |
\def\nprt@rounddigits{#1}% |
| 1903 |
\def\nprt@roundnull{}% |
| 1904 |
\nprt@fillnull{\nprt@roundnull}{#1}% |
| 1905 |
} |
| 1906 |
% \end{macrocode} |
| 1907 |
% \end{macro} |
| 1908 |
% \begin{macro}{\npnoround} |
| 1909 |
% A command to switch off rounding. |
| 1910 |
% \begin{macrocode} |
| 1911 |
\newcommand\npnoround{\nprounddigits{-1}} |
| 1912 |
% \end{macrocode} |
| 1913 |
% \end{macro} |
| 1914 |
% Don't round by default. |
| 1915 |
% \begin{macrocode} |
| 1916 |
\npnoround |
| 1917 |
% \end{macrocode} |
| 1918 |
% \begin{macro}{\nproundexpdigits} |
| 1919 |
% \begin{macro}{\npnoroundexp} |
| 1920 |
% The same for exponents. |
| 1921 |
% \begin{macrocode} |
| 1922 |
\newcommand\nproundexpdigits[1]{% |
| 1923 |
\def\nprt@roundexpdigits{#1}% |
| 1924 |
\def\nprt@roundexpnull{}% |
| 1925 |
\nprt@fillnull{\nprt@roundexpnull}{#1}% |
| 1926 |
} |
| 1927 |
\newcommand\npnoroundexp{\nproundexpdigits{-1}} |
| 1928 |
\npnoroundexp |
| 1929 |
% \end{macrocode} |
| 1930 |
% \end{macro} |
| 1931 |
% \end{macro} |
| 1932 |
% \begin{macro}{\nplpadding} |
| 1933 |
% This command sets the total counts of digits a number should contain. |
| 1934 |
% The missing digits are filled with the character from the second |
| 1935 |
% argument (which is 0 by default). |
| 1936 |
% \begin{macrocode} |
| 1937 |
\newcommand\nplpadding[2][0]{% |
| 1938 |
\def\nprt@lpaddigits{#2}% |
| 1939 |
\def\nprt@lpadchar{#1}% |
| 1940 |
} |
| 1941 |
% \end{macrocode} |
| 1942 |
% \end{macro} |
| 1943 |
% \begin{macro}{\npnolpadding} |
| 1944 |
% The command to switch of padding. |
| 1945 |
% \begin{macrocode} |
| 1946 |
\newcommand*\npnolpadding{\nplpadding[\@empty]{-1}} |
| 1947 |
% \end{macrocode} |
| 1948 |
% \end{macro} |
| 1949 |
% Don't pad by default. |
| 1950 |
% \begin{macrocode} |
| 1951 |
\npnolpadding |
| 1952 |
% \end{macrocode} |
| 1953 |
% \begin{macro}{\npreplacenull} |
| 1954 |
% Optionally, one or more zeros after the decimal sign can be replaced |
| 1955 |
% by other text, e.g., ``---'''. |
| 1956 |
% \begin{macrocode} |
| 1957 |
\newcommand*\npreplacenull[1]{\def\nprt@replacenull{#1}} |
| 1958 |
% \end{macrocode} |
| 1959 |
% \end{macro} |
| 1960 |
% \begin{macro}{\npprintnull} |
| 1961 |
% Switch off replacement, again. |
| 1962 |
% \begin{macrocode} |
| 1963 |
\newcommand*\npprintnull{\let\nprt@replacenull=\@empty} |
| 1964 |
% \end{macrocode} |
| 1965 |
% \end{macro} |
| 1966 |
% Print the zero by default. |
| 1967 |
% \begin{macrocode} |
| 1968 |
\npprintnull |
| 1969 |
% \end{macrocode} |
| 1970 |
% \begin{macro}{\npunitcommand} |
| 1971 |
% This command is used to typeset the unit. |
| 1972 |
% \begin{macrocode} |
| 1973 |
\newcommand*\npunitcommand[1]{\ensuremath{\mathrm{#1}}} |
| 1974 |
% \end{macrocode} |
| 1975 |
% \end{macro} |
| 1976 |
% \begin{macro}{\npdigits} |
| 1977 |
% With this command the user can switch to aligned printing. |
| 1978 |
% The first parameter stands for the digits before the decimal sign |
| 1979 |
% and the second for the digits after it. |
| 1980 |
% \begin{macrocode} |
| 1981 |
\newif\ifnprt@mantissa@fixeddigits |
| 1982 |
\newcommand*\npdigits[2]{% |
| 1983 |
\edef\nprt@mantissa@fixeddigits@before{#1}% |
| 1984 |
\edef\nprt@mantissa@fixeddigits@after{#2}% |
| 1985 |
\nprt@mantissa@fixeddigitstrue |
| 1986 |
} |
| 1987 |
% \end{macrocode} |
| 1988 |
% Initialize the numbers. |
| 1989 |
% \begin{macrocode} |
| 1990 |
\def\nprt@mantissa@fixeddigits@before{-1}% |
| 1991 |
\def\nprt@mantissa@fixeddigits@after{-1}% |
| 1992 |
% \end{macrocode} |
| 1993 |
% \end{macro} |
| 1994 |
% \begin{macro}{\npnodigits} |
| 1995 |
% Switch back to normal printing. |
| 1996 |
% \begin{macrocode} |
| 1997 |
\newcommand*\npnodigits{\nprt@mantissa@fixeddigitsfalse} |
| 1998 |
% \end{macrocode} |
| 1999 |
% \end{macro} |
| 2000 |
% \begin{macro}{\npexponentdigits} |
| 2001 |
% With this command the user can switch to aligned printing of the |
| 2002 |
% exponent. |
| 2003 |
% The parameter stands for the digits before the decimal sign. |
| 2004 |
% \begin{macrocode} |
| 2005 |
\newif\ifnprt@exponent@fixeddigits |
| 2006 |
\newcommand*\npexponentdigits[2][0]{% |
| 2007 |
\edef\nprt@exponent@fixeddigits@before{#2}% |
| 2008 |
\edef\nprt@exponent@fixeddigits@after{#1}% |
| 2009 |
\nprt@exponent@fixeddigitstrue |
| 2010 |
} |
| 2011 |
% \end{macrocode} |
| 2012 |
% Initialize the numbers. |
| 2013 |
% \begin{macrocode} |
| 2014 |
\def\nprt@exponent@fixeddigits@before{-1}% |
| 2015 |
\def\nprt@exponent@fixeddigits@after{-1}% |
| 2016 |
% \end{macrocode} |
| 2017 |
% \end{macro} |
| 2018 |
% \begin{macro}{\npnoexponentdigits} |
| 2019 |
% Switch back to normal printing. |
| 2020 |
% \begin{macrocode} |
| 2021 |
\newcommand*\npnoexponentdigits{\nprt@exponent@fixeddigitsfalse} |
| 2022 |
% \end{macrocode} |
| 2023 |
% \end{macro} |
| 2024 |
% |
| 2025 |
% |
| 2026 |
% \subsection{Error and warning messages} |
| 2027 |
% |
| 2028 |
% Define a boolean which helps \cs{numprint} to detect errors. |
| 2029 |
% \begin{macrocode} |
| 2030 |
\newif\ifnprt@argumenterror |
| 2031 |
% \end{macrocode} |
| 2032 |
% \begin{macro}{\nprt@error} |
| 2033 |
% Define \cs{nprt@error\marg{Message}\marg{Help text}} which prints |
| 2034 |
% a warning resp.\ an error message, depending on the package options |
| 2035 |
% |warning| and |error|. |
| 2036 |
% \begin{macrocode} |
| 2037 |
\newcommand\nprt@error[2]{% |
| 2038 |
\ifnprt@errormessage |
| 2039 |
\PackageError{numprint}{#1}{#2}% |
| 2040 |
\else |
| 2041 |
\PackageWarning{numprint}{#1}% |
| 2042 |
\fi |
| 2043 |
% \end{macrocode} |
| 2044 |
% The boolean is set to ``true''. |
| 2045 |
% Then, \cs{numprint} knows that an error occured. |
| 2046 |
% \begin{macrocode} |
| 2047 |
\nprt@argumenterrortrue |
| 2048 |
} |
| 2049 |
% \end{macrocode} |
| 2050 |
% \end{macro} |
| 2051 |
% |
| 2052 |
% |
| 2053 |
% \subsection{String parsing} |
| 2054 |
% |
| 2055 |
% \changes{1.10}{2003/10/12}{Avoid use of \texttt{substr} package}% |
| 2056 |
% The \cs{IfCharInString} package does not work in the tabular |
| 2057 |
% alignment context. |
| 2058 |
% Thus, define an own command \cs{nprt@IfCharInString} that does the |
| 2059 |
% same. |
| 2060 |
% \begin{macro}{\nprt@charfound} |
| 2061 |
% \begin{macrocode} |
| 2062 |
\newif\ifnprt@charfound |
| 2063 |
% \end{macrocode} |
| 2064 |
% \end{macro} |
| 2065 |
% \begin{macro}{\nprt@IfCharInString} |
| 2066 |
% ???? |
| 2067 |
% \begin{macrocode} |
| 2068 |
\newcommand*\nprt@IfCharInString[2]{% |
| 2069 |
\nprt@charfoundfalse |
| 2070 |
\begingroup |
| 2071 |
\def\nprt@searchfor{#1}% |
| 2072 |
\edef\nprt@argtwo{#2}% |
| 2073 |
\expandafter\nprt@@IfCharInString\nprt@argtwo\@empty\@empty |
| 2074 |
\endgroup |
| 2075 |
\ifnprt@charfound |
| 2076 |
\expandafter\@firstoftwo |
| 2077 |
\else |
| 2078 |
\expandafter\@secondoftwo |
| 2079 |
\fi |
| 2080 |
} |
| 2081 |
% \end{macrocode} |
| 2082 |
% \end{macro} |
| 2083 |
% \begin{macro}{\nprt@@IfCharInString} |
| 2084 |
% ???? |
| 2085 |
% \begin{macrocode} |
| 2086 |
\def\nprt@@IfCharInString#1#2\@empty{% |
| 2087 |
\def\nprt@argone{#1}% |
| 2088 |
\edef\nprt@argtwo{#2}% |
| 2089 |
\ifx\nprt@searchfor\nprt@argone |
| 2090 |
\global\nprt@charfoundtrue |
| 2091 |
\else |
| 2092 |
\ifx\nprt@argtwo\@empty |
| 2093 |
\else |
| 2094 |
\nprt@@IfCharInString#2\@empty |
| 2095 |
\fi |
| 2096 |
\fi |
| 2097 |
} |
| 2098 |
% \end{macrocode} |
| 2099 |
% \end{macro} |
| 2100 |
% |
| 2101 |
% |
| 2102 |
% \subsection{Parsing of the \textmd{\cs{numprint}} argument} |
| 2103 |
% |
| 2104 |
% \begin{macro}{\nprt@plus@test} |
| 2105 |
% \begin{macro}{\nprt@minus@test} |
| 2106 |
% \begin{macro}{\nprt@plusminus@test} |
| 2107 |
% Define the signs as commands. This is necessary to be able to |
| 2108 |
% compare them with other characters. |
| 2109 |
% \begin{macrocode} |
| 2110 |
\newcommand*\nprt@plus@test{+} |
| 2111 |
\newcommand*\nprt@minus@test{-} |
| 2112 |
\newcommand*\nprt@plusminus@test{\pm} |
| 2113 |
% \end{macrocode} |
| 2114 |
% \end{macro} |
| 2115 |
% \end{macro} |
| 2116 |
% \end{macro} |
| 2117 |
% \begin{macro}{\nprt@numberlist} |
| 2118 |
% \begin{macro}{\nprt@dotlist} |
| 2119 |
% \begin{macro}{\nprt@epxlist} |
| 2120 |
% \begin{macro}{\nprt@signlist} |
| 2121 |
% Define lists of valid characters for different elements of numbers |
| 2122 |
% for parsing the mandatory argument of the \cs{numprint} command. |
| 2123 |
% It has nothing to do with the output. |
| 2124 |
% \cs{nprt@numberlist} contains digits, \cs{nprt@dotlist} valid |
| 2125 |
% decimal signs, \cs{nprt@explist} the characters that start the |
| 2126 |
% exponent, and \cs{nprt@signlist} the valid signs, where |
| 2127 |
% ``\texttt{+-}'' as alias for ``\cs{pm}'' does not have to be |
| 2128 |
% specified seperately. |
| 2129 |
% \begin{macrocode} |
| 2130 |
\newcommand*\nprt@numberlist{0123456789} |
| 2131 |
\newcommand*\nprt@dotlist{.,} |
| 2132 |
\newcommand*\nprt@explist{eEdD} |
| 2133 |
\newcommand*\nprt@signlist{+-\pm} |
| 2134 |
\newcommand*\nprt@ignorelist{} |
| 2135 |
% \end{macrocode} |
| 2136 |
% \end{macro} |
| 2137 |
% \end{macro} |
| 2138 |
% \end{macro} |
| 2139 |
% \end{macro} |
| 2140 |
% Counters for the number of digits before and after the decimal sign |
| 2141 |
% of the mantissa. |
| 2142 |
% \begin{macrocode} |
| 2143 |
\newcounter{nprt@mantissa@digitsbefore}% |
| 2144 |
\newcounter{nprt@mantissa@digitsafter}% |
| 2145 |
% \end{macrocode} |
| 2146 |
% Counters for the number of digits before and after the decimal sign |
| 2147 |
% of the exponent. |
| 2148 |
% \begin{macrocode} |
| 2149 |
\newcounter{nprt@exponent@digitsbefore}% |
| 2150 |
\newcounter{nprt@exponent@digitsafter}% |
| 2151 |
% \end{macrocode} |
| 2152 |
% Boolean to store if an exponent will be printed. |
| 2153 |
% \begin{macrocode} |
| 2154 |
\newif\ifnprt@expfound |
| 2155 |
% \end{macrocode} |
| 2156 |
% Boolean to store if mantissa resp.\ exponent contain a decimal |
| 2157 |
% sign. |
| 2158 |
% \begin{macrocode} |
| 2159 |
\newif\ifnprt@mantissa@decimalfound |
| 2160 |
\newif\ifnprt@exponent@decimalfound |
| 2161 |
% \end{macrocode} |
| 2162 |
% \begin{macro}{\nprt@testsign} |
| 2163 |
% Define \cs{nprt@testsign\marg{Number type}\marg{Number}} which tests |
| 2164 |
% whether a sign is given and then starts \cs{nprt@testnumber} (the |
| 2165 |
% call actually is done by \cs{nprt@@testsign}). |
| 2166 |
% \begin{macrocode} |
| 2167 |
\newcommand*\nprt@testsign[2]{% |
| 2168 |
% \end{macrocode} |
| 2169 |
% First, store the expanded arguments in macros. |
| 2170 |
% \begin{macrocode} |
| 2171 |
\edef\nprt@commandname{#1}% |
| 2172 |
\edef\nprt@tmp{#2}% |
| 2173 |
% \end{macrocode} |
| 2174 |
% Call the working command \cs{nprt@@testsign}. |
| 2175 |
% The large number of \cs{expandafter} calls is necessary to ensure |
| 2176 |
% that the second to fourth argument are already expanded (thus, |#2| |
| 2177 |
% and |#3| are single characters). |
| 2178 |
% Append enough \cs{@empty} to ensure the argument-end marker is found |
| 2179 |
% even for an empty number. |
| 2180 |
% \begin{macrocode} |
| 2181 |
\expandafter\nprt@@testsign\expandafter{% |
| 2182 |
\expandafter\nprt@commandname\expandafter}% |
| 2183 |
\nprt@tmp\@empty\@empty\@empty\@empty |
| 2184 |
} |
| 2185 |
% \end{macrocode} |
| 2186 |
% \end{macro} |
| 2187 |
% \begin{macro}{\nprt@@testsign} |
| 2188 |
% The first argument is the Number type (``mantissa'' or |
| 2189 |
% ``exponent''). |
| 2190 |
% Because it is longer than one character, it has to be enclosed in |
| 2191 |
% braces when calling this function (see the previous code line). |
| 2192 |
% The arguments |#2| to |#4| are the given number, where |#2| and |#3| |
| 2193 |
% contain of the first resp.\ second character of the number, while |
| 2194 |
% |#4| contains the rest. |
| 2195 |
% \begin{macrocode} |
| 2196 |
\def\nprt@@testsign#1#2#3#4\@empty{% |
| 2197 |
% \end{macrocode} |
| 2198 |
% Store the first argument to a macro. |
| 2199 |
% \begin{macrocode} |
| 2200 |
\edef\nprt@commandname{#1}% |
| 2201 |
% \end{macrocode} |
| 2202 |
% Define the macros that store the digits before respectivly after the |
| 2203 |
% decimal sign. |
| 2204 |
% They are filled digit by digit and start empty. |
| 2205 |
% \begin{macrocode} |
| 2206 |
\expandafter\xdef\csname nprt@#1@before\endcsname{\@empty}% |
| 2207 |
\expandafter\xdef\csname nprt@#1@after\endcsname{\@empty}% |
| 2208 |
% \end{macrocode} |
| 2209 |
% Yet, no digits are stored. |
| 2210 |
% \begin{macrocode} |
| 2211 |
\setcounter{nprt@#1@digitsbefore}{0}% |
| 2212 |
\setcounter{nprt@#1@digitsafter}{0}% |
| 2213 |
% \end{macrocode} |
| 2214 |
% Test whether the first character of the number, |#2|, contains a |
| 2215 |
% sign symbol which is listed in \cs{nprt@signlist}. |
| 2216 |
% \begin{macrocode} |
| 2217 |
\nprt@IfCharInString{#2}{\nprt@signlist}{% |
| 2218 |
% \end{macrocode} |
| 2219 |
% If yes, store that sign in the command |
| 2220 |
% \cs{nprt@\meta{\#2}@sign}. |
| 2221 |
% \begin{macrocode} |
| 2222 |
\expandafter\xdef\csname nprt@#1@sign\endcsname{#2}% |
| 2223 |
% \end{macrocode} |
| 2224 |
% If the sign is a ``+'' the second character of the number may be a |
| 2225 |
% ``-'' to replace that combination by \cs{pm}. |
| 2226 |
% Thus, do an extra handling of that case. |
| 2227 |
% \begin{macrocode} |
| 2228 |
\expandafter\ifx\csname nprt@#1@sign\endcsname\nprt@plus@test |
| 2229 |
\def\nprt@tmp{#3}% |
| 2230 |
\ifx\nprt@tmp\nprt@minus@test |
| 2231 |
% \end{macrocode} |
| 2232 |
% The second character, |#3|, \emph{is} a ``-'', thus redefine |
| 2233 |
% \cs{nprt@\meta{\#2}@sign} to \cs{pm}. |
| 2234 |
% \begin{macrocode} |
| 2235 |
\expandafter\xdef\csname nprt@#1@sign\endcsname{+-}% |
| 2236 |
% \end{macrocode} |
| 2237 |
% The digits start at the third character of the number string which |
| 2238 |
% is |#4|. |
| 2239 |
% Start \cs{nprt@testnumber} to parse the digits of the number if a |
| 2240 |
% number is given after the given sign ``+-''. |
| 2241 |
% If not, empty \cs{nprt@\meta{\#1}} that \cs{numprint} can determine |
| 2242 |
% that only a sign has been given. |
| 2243 |
% \begin{macrocode} |
| 2244 |
\def\nprt@tmp{#4}% |
| 2245 |
\ifx\nprt@tmp\@empty |
| 2246 |
\expandafter\edef\csname nprt@#1\endcsname{\@empty}% |
| 2247 |
\else |
| 2248 |
\expandafter\nprt@testnumber\expandafter\nprt@commandname#4\@empty |
| 2249 |
\fi |
| 2250 |
\else |
| 2251 |
% \end{macrocode} |
| 2252 |
% If there is a single sign character ``+'', the digits start at |#3|. |
| 2253 |
% Start \cs{nprt@testnumber} to parse the digits of the number if a |
| 2254 |
% number is given after the given sign ``+''. |
| 2255 |
% If not, empty \cs{nprt@\meta{\#1}} that \cs{numprint} can determine |
| 2256 |
% that only a sign has been given. |
| 2257 |
% \begin{macrocode} |
| 2258 |
\ifx#3\@empty |
| 2259 |
\expandafter\edef\csname nprt@#1\endcsname{\@empty}% |
| 2260 |
\else |
| 2261 |
\expandafter\nprt@testnumber\expandafter\nprt@commandname#3#4\@empty |
| 2262 |
\fi |
| 2263 |
\fi |
| 2264 |
\else |
| 2265 |
% \end{macrocode} |
| 2266 |
% If the sign is a ``\cs{pm}'' store ``\texttt{+-} as sign. |
| 2267 |
% \begin{macrocode} |
| 2268 |
\expandafter\ifx\csname nprt@#1@sign\endcsname\nprt@plusminus@test |
| 2269 |
\expandafter\xdef\csname nprt@#1@sign\endcsname{+-}% |
| 2270 |
\fi |
| 2271 |
% \end{macrocode} |
| 2272 |
% If there is a single sign character other than ``+'', the digits |
| 2273 |
% start at |#3|. |
| 2274 |
% Start \cs{nprt@testnumber} to parse the digits of the number if a |
| 2275 |
% number is given after the given sign. |
| 2276 |
% If not, empty \cs{nprt@\meta{\#1}} that \cs{numprint} can determine |
| 2277 |
% that only a sign has been given. |
| 2278 |
% \begin{macrocode} |
| 2279 |
\ifx#3\@empty |
| 2280 |
\expandafter\edef\csname nprt@#1\endcsname{\@empty}% |
| 2281 |
\else |
| 2282 |
\expandafter\nprt@testnumber\expandafter\nprt@commandname#3#4\@empty |
| 2283 |
\fi |
| 2284 |
\fi |
| 2285 |
}{% |
| 2286 |
% \end{macrocode} |
| 2287 |
% If there is no sign, set \cs{nprt@\meta{\#2}@sign} empty. |
| 2288 |
% \begin{macrocode} |
| 2289 |
\expandafter\xdef\csname nprt@#1@sign\endcsname{\@empty}% |
| 2290 |
% \end{macrocode} |
| 2291 |
% The digits start at |#2|. |
| 2292 |
% Start \cs{nprt@testnumber} to parse the digits of the number. |
| 2293 |
% \begin{macrocode} |
| 2294 |
\expandafter\nprt@testnumber\expandafter\nprt@commandname#2#3#4\@empty |
| 2295 |
}% |
| 2296 |
} |
| 2297 |
% \end{macrocode} |
| 2298 |
% \end{macro} |
| 2299 |
% \begin{macro}{\nprt@testnumber} |
| 2300 |
% As with \cs{nprt@@testsign}, the first argument is the Number type, |
| 2301 |
% while the second and third arguments contain the number. |
| 2302 |
% |#2| contains the first character of the remaining number string, |
| 2303 |
% |#3| the rest. |
| 2304 |
% \begin{macrocode} |
| 2305 |
\def\nprt@testnumber#1#2#3\@empty{% |
| 2306 |
% \end{macrocode} |
| 2307 |
% Store the arguments in macros. |
| 2308 |
% \begin{macrocode} |
| 2309 |
\edef\nprt@commandname{#1}% |
| 2310 |
\edef\nprt@argthree{#3}% |
| 2311 |
% \end{macrocode} |
| 2312 |
% Test whether the current character is a valid character for a real |
| 2313 |
% number (say a digit or a decimal sign). |
| 2314 |
% \begin{macrocode} |
| 2315 |
\nprt@IfCharInString{#2}{\nprt@numberlist\nprt@dotlist}{% |
| 2316 |
% \end{macrocode} |
| 2317 |
% If this is the case, continue testing. |
| 2318 |
% If the current character is a decimal sign, set the boolean |
| 2319 |
% \cs{ifnprt@\meta{Number type}@decimalfound} that a decimal |
| 2320 |
% sign has been found. |
| 2321 |
% If this has been done before, the number contains two decimal signs |
| 2322 |
% which is not allowed, thus, generate an error message. |
| 2323 |
% \begin{macrocode} |
| 2324 |
\nprt@IfCharInString{#2}{\nprt@dotlist}{% |
| 2325 |
\csname ifnprt@#1@decimalfound\endcsname |
| 2326 |
\nprt@error{More than one decimal sign used}{The mantissa |
| 2327 |
or the exponent may only contain a maximum of one decimal |
| 2328 |
sign (one of the list `\nprt@dotlist')}% |
| 2329 |
\else |
| 2330 |
\csname nprt@#1@decimalfoundtrue\endcsname |
| 2331 |
\fi |
| 2332 |
}{% |
| 2333 |
% \end{macrocode} |
| 2334 |
% If the current character is no decimal sign it has to be a digit. |
| 2335 |
% If the decimal sign has been found before, this digit is in the real |
| 2336 |
% part of the number. |
| 2337 |
% Then, add it at the end of the after-decimal-sign part. |
| 2338 |
% Also, increase the number of found digits. |
| 2339 |
% \begin{macrocode} |
| 2340 |
\csname ifnprt@#1@decimalfound\endcsname |
| 2341 |
\expandafter\g@addto@macro\csname nprt@#1@after\endcsname{#2}% |
| 2342 |
\advance\csname c@nprt@#1@digitsafter\endcsname by 1\relax |
| 2343 |
\else |
| 2344 |
% \end{macrocode} |
| 2345 |
% If the decimal sign has not been found before, this digit is in the |
| 2346 |
% integer part of the number. |
| 2347 |
% Then, add it at the end of the before-decimal-sign part. |
| 2348 |
% \begin{macrocode} |
| 2349 |
\expandafter\g@addto@macro\csname nprt@#1@before\endcsname{#2}% |
| 2350 |
\advance\csname c@nprt@#1@digitsbefore\endcsname by 1\relax |
| 2351 |
\fi |
| 2352 |
}% |
| 2353 |
% \end{macrocode} |
| 2354 |
% If the next character is not \cs{@empty} and thus, the end of the |
| 2355 |
% number is not reached, start \cs{nprt@testnumber} resursively to |
| 2356 |
% parse the next character. |
| 2357 |
% \begin{macrocode} |
| 2358 |
\ifx\nprt@argthree\@empty |
| 2359 |
\else |
| 2360 |
\expandafter\nprt@testnumber\expandafter\nprt@commandname#3\@empty |
| 2361 |
\fi |
| 2362 |
}{% |
| 2363 |
% \end{macrocode} |
| 2364 |
% The current character is neither a digit nor a decimal sign. |
| 2365 |
% Thus, it is a invalid character; produce an error message. |
| 2366 |
% \begin{macrocode} |
| 2367 |
\nprt@error{Invalid number format. Printing the |
| 2368 |
argument\MessageBreak |
| 2369 |
verbatim}{Something is wrong in the format of the number}% |
| 2370 |
}% |
| 2371 |
} |
| 2372 |
% \end{macrocode} |
| 2373 |
% \end{macro} |
| 2374 |
% \begin{macro}{\nprt@testcharacter} |
| 2375 |
% This macro parses the whole mandatory argument of \cs{numprint}. |
| 2376 |
% This means it is tested on invalid characters and on a mantissa and |
| 2377 |
% an exponent. |
| 2378 |
% The first argument is the current character while |#2| is the rest |
| 2379 |
% of the argument, not parsed yet. |
| 2380 |
% \begin{macrocode} |
| 2381 |
\def\nprt@testcharacter#1#2\@empty{% |
| 2382 |
% \end{macrocode} |
| 2383 |
% Store the second argument to a macro. |
| 2384 |
% \begin{macrocode} |
| 2385 |
\edef\nprt@argtwo{#2}% |
| 2386 |
% \end{macrocode} |
| 2387 |
% Test whether the current character is a valid one. |
| 2388 |
% \begin{macrocode} |
| 2389 |
\nprt@IfCharInString{#1}{% |
| 2390 |
\nprt@numberlist\nprt@dotlist\nprt@explist\nprt@signlist\nprt@ignorelist}{% |
| 2391 |
% \end{macrocode} |
| 2392 |
% Yes, it is valid. |
| 2393 |
% |
| 2394 |
% Now, test whether it is one of the ignored characters. |
| 2395 |
% \begin{macrocode} |
| 2396 |
\nprt@IfCharInString{#1}{\nprt@ignorelist}{% |
| 2397 |
\nprt@debug{Character `\noexpand#1' ignored}% |
| 2398 |
}{% |
| 2399 |
% \end{macrocode} |
| 2400 |
% Yes, it is valid. |
| 2401 |
% |
| 2402 |
% Now, test whether it is one of the characters that start the |
| 2403 |
% exponent. |
| 2404 |
% If yes, set \cs{ifnprt@expfound} to ``true''. |
| 2405 |
% If in addition, this has been done before, you have used more than |
| 2406 |
% one exponent starting character; produce an error message. |
| 2407 |
% \begin{macrocode} |
| 2408 |
\nprt@IfCharInString{#1}{\nprt@explist}{% |
| 2409 |
\ifnprt@expfound |
| 2410 |
\nprt@error{Character for exponent (`\nprt@explist') used |
| 2411 |
more than once}{The argument of \string\numprint\space may |
| 2412 |
only contain one of following characters: `\nprt@explist'}% |
| 2413 |
\fi |
| 2414 |
\nprt@expfoundtrue |
| 2415 |
}{% |
| 2416 |
% \end{macrocode} |
| 2417 |
% If the current character is not an exponent-starting character it |
| 2418 |
% is either a part of the mantissa or the exponent, depending on |
| 2419 |
% whether the exponent has been started before. |
| 2420 |
% Add the current character to the corresponding command that stores |
| 2421 |
% the mantissa resp.\ the exponent. |
| 2422 |
% \begin{macrocode} |
| 2423 |
\ifnprt@expfound |
| 2424 |
\g@addto@macro\nprt@exponent{#1}% |
| 2425 |
\else |
| 2426 |
\g@addto@macro\nprt@mantissa{#1}% |
| 2427 |
\fi |
| 2428 |
}% |
| 2429 |
}% |
| 2430 |
% \end{macrocode} |
| 2431 |
% If we have not reached the end of the argument, call |
| 2432 |
% \cs{nprt@testcharacter} recursively. |
| 2433 |
% \begin{macrocode} |
| 2434 |
\ifx\nprt@argtwo\@empty |
| 2435 |
\else |
| 2436 |
\nprt@testcharacter#2\@empty\@empty\@empty |
| 2437 |
\fi |
| 2438 |
}{% |
| 2439 |
% \end{macrocode} |
| 2440 |
% If the character is not valid produce an error message. |
| 2441 |
% \begin{macrocode} |
| 2442 |
\nprt@error{Invalid characters `#1' in mandatory argument |
| 2443 |
of\MessageBreak |
| 2444 |
\string\numprint. Allowed are\MessageBreak |
| 2445 |
`\nprt@numberlist\nprt@dotlist\nprt@explist\nprt@signlist\nprt@ignorelist'}{% |
| 2446 |
You may only use the specified characters in the argument.}% |
| 2447 |
}% |
| 2448 |
} |
| 2449 |
% \end{macrocode} |
| 2450 |
% \end{macro} |
| 2451 |
% |
| 2452 |
% |
| 2453 |
% \subsection{Table alignment} |
| 2454 |
% |
| 2455 |
% \subsubsection{Aligned numbers, also for ordinary text} |
| 2456 |
% |
| 2457 |
% Define some lengths that help to calculate the width of a number. |
| 2458 |
% \begin{macrocode} |
| 2459 |
\newlength{\nprt@digitwidth}% |
| 2460 |
\newlength{\nprt@sepwidth}% |
| 2461 |
\newlength{\nprt@decimalwidth}% |
| 2462 |
\newlength{\nprt@blockwidth}% |
| 2463 |
% \end{macrocode} |
| 2464 |
% \begin{macro}{\nprt@calcblockwidth} |
| 2465 |
% Define \cs{nprt@calcblockwidth\marg{Number |
| 2466 |
% type}\marg{Position}\marg{Math mode}}, where |
| 2467 |
% \meta{Number type} is either ``mantissa'' or ``exponent'', |
| 2468 |
% \meta{Position} is the position relative to the decimal sign |
| 2469 |
% (``before'' or ``after''), \meta{Math mode} is a math mode command |
| 2470 |
% (\cs{displaystyle}, \cs{textstyle}, \cs{scriptstyle}, or |
| 2471 |
% \cs{scriptscriptstyle}). |
| 2472 |
% |
| 2473 |
% This macro calculates the width of a block if aligned output is |
| 2474 |
% requested. |
| 2475 |
% The resulted width is stored in the length \cs{nprt@blockwidth}. |
| 2476 |
% \begin{macrocode} |
| 2477 |
\newcommand*\nprt@calcblockwidth[3]{% |
| 2478 |
% \end{macrocode} |
| 2479 |
% Store the arguments in macros. |
| 2480 |
% \begin{macrocode} |
| 2481 |
\edef\nprt@argone{#1}% |
| 2482 |
\edef\nprt@argtwo{#2}% |
| 2483 |
\edef\nprt@argthree{#3}% |
| 2484 |
% \end{macrocode} |
| 2485 |
% Define a macro with the contents ``mantissa'' to be able to compare |
| 2486 |
% it. |
| 2487 |
% \begin{macrocode} |
| 2488 |
\edef\nprt@mantissaname{mantissa}% |
| 2489 |
% \end{macrocode} |
| 2490 |
% Define a macro with the contents ``after'' to be able to compare |
| 2491 |
% it. |
| 2492 |
% \begin{macrocode} |
| 2493 |
\edef\nprt@aftername{after}% |
| 2494 |
% \end{macrocode} |
| 2495 |
% If the width for the mantissa is to be calculated, enter this code |
| 2496 |
% part. |
| 2497 |
% \begin{macrocode} |
| 2498 |
\ifx\nprt@argone\nprt@mantissaname |
| 2499 |
% \end{macrocode} |
| 2500 |
% The width of the digits and separators changes between text and |
| 2501 |
% math mode. |
| 2502 |
% If math mode is active, proceed here. |
| 2503 |
% \begin{macrocode} |
| 2504 |
\ifmmode |
| 2505 |
% \end{macrocode} |
| 2506 |
% Calculate the width of digits. |
| 2507 |
% It is assumed that all digits have the same width as a zero. |
| 2508 |
% First, execute parameter \verb|#3| to switch to the current math |
| 2509 |
% style. |
| 2510 |
% This is be done that way since it is not possible to export length |
| 2511 |
% values from \cs{mathchoice}. |
| 2512 |
% \begin{macrocode} |
| 2513 |
\settowidth{\nprt@digitwidth}{$#3% |
| 2514 |
0$}% |
| 2515 |
% \end{macrocode} |
| 2516 |
% Calculate the width of the separators. |
| 2517 |
% This may differ from before and after the decimal sign. |
| 2518 |
% \begin{macrocode} |
| 2519 |
\settowidth{\nprt@sepwidth}{$#3% |
| 2520 |
\csname nprt@separator@#2\endcsname$}% |
| 2521 |
% \end{macrocode} |
| 2522 |
% Calculate the width of the decimal sign. |
| 2523 |
% \begin{macrocode} |
| 2524 |
\settowidth{\nprt@decimalwidth}{$#3% |
| 2525 |
\nprt@decimal$}% |
| 2526 |
\else |
| 2527 |
% \end{macrocode} |
| 2528 |
% Do the same for text mode. |
| 2529 |
% \begin{macrocode} |
| 2530 |
\settowidth{\nprt@digitwidth}{0}% |
| 2531 |
\settowidth{\nprt@sepwidth}{\csname nprt@separator@#2\endcsname}% |
| 2532 |
\settowidth{\nprt@decimalwidth}{\nprt@decimal}% |
| 2533 |
\fi |
| 2534 |
% \end{macrocode} |
| 2535 |
% The same for the exponent. |
| 2536 |
% \begin{macrocode} |
| 2537 |
\else |
| 2538 |
\ifmmode |
| 2539 |
\settowidth{\nprt@digitwidth}{$#3% |
| 2540 |
{}^{0}$}% |
| 2541 |
\settowidth{\nprt@sepwidth}{$#3% |
| 2542 |
{}^{\csname nprt@separator@#2\endcsname}$}% |
| 2543 |
\settowidth{\nprt@decimalwidth}{$#3% |
| 2544 |
{}^{\nprt@decimal}$}% |
| 2545 |
\else |
| 2546 |
\settowidth{\nprt@digitwidth}{\textsuperscript{0}}% |
| 2547 |
\settowidth{\nprt@sepwidth}{% |
| 2548 |
\textsuperscript{\csname nprt@separator@#2\endcsname}}% |
| 2549 |
\settowidth{\nprt@decimalwidth}{\textsuperscript{\nprt@decimal}}% |
| 2550 |
\fi |
| 2551 |
\fi |
| 2552 |
% \end{macrocode} |
| 2553 |
% Output to the log file. |
| 2554 |
% \begin{macrocode} |
| 2555 |
\nprt@debug{Widths for #1 #2 decimal sign |
| 2556 |
(\ifx\nprt@argthree\@empty text mode\else math mode #3\fi):\MessageBreak |
| 2557 |
digits \the\nprt@digitwidth, |
| 2558 |
separators \the\nprt@sepwidth,\MessageBreak |
| 2559 |
decimal sign \the\nprt@decimalwidth}% |
| 2560 |
% \end{macrocode} |
| 2561 |
% Produce a warning if the current number exceeds the reserved space. |
| 2562 |
% Signs ($+-\pm$) are not taken into account. |
| 2563 |
% \begin{macrocode} |
| 2564 |
\ifnum\csname nprt@#1@fixeddigits@#2\endcsname<% |
| 2565 |
\csname thenprt@#1@digits#2\endcsname |
| 2566 |
\PackageWarning{numprint}{#1 exceeds reserved space |
| 2567 |
#2\MessageBreak |
| 2568 |
decimal sign}% |
| 2569 |
\fi |
| 2570 |
% \end{macrocode} |
| 2571 |
% \changes{1.34}{2004/12/13}{Fix a bug invoked in version~1.33. Found |
| 2572 |
% by Stefan Salewski}% |
| 2573 |
% Calculate the width of the given number of digits without |
| 2574 |
% separators. |
| 2575 |
% \begin{macrocode} |
| 2576 |
\setlength{\nprt@blockwidth}{% |
| 2577 |
\csname nprt@#1@fixeddigits@#2\endcsname\nprt@digitwidth}% |
| 2578 |
% \end{macrocode} |
| 2579 |
% Calculate how many separators are put into the number. |
| 2580 |
% \begin{macrocode} |
| 2581 |
\setcounter{nprt@blockcnt}{\csname nprt@#1@fixeddigits@#2\endcsname}% |
| 2582 |
\advance\c@nprt@blockcnt by -1\relax |
| 2583 |
\divide\c@nprt@blockcnt 3% |
| 2584 |
% \end{macrocode} |
| 2585 |
% If four-digit length numbers are not separated, delete the number of |
| 2586 |
% separators again. |
| 2587 |
% \begin{macrocode} |
| 2588 |
\ifnprt@numsepfour |
| 2589 |
\else |
| 2590 |
\ifnum\csname nprt@#1@fixeddigits@before\endcsname<5 |
| 2591 |
\ifnum\csname nprt@#1@fixeddigits@after\endcsname<5 |
| 2592 |
\setcounter{nprt@blockcnt}{0}% |
| 2593 |
\fi |
| 2594 |
\fi |
| 2595 |
\fi |
| 2596 |
% \end{macrocode} |
| 2597 |
% Add the width of the separators to the width. |
| 2598 |
% \begin{macrocode} |
| 2599 |
\addtolength{\nprt@blockwidth}{\thenprt@blockcnt\nprt@sepwidth}% |
| 2600 |
% \end{macrocode} |
| 2601 |
% Add the width of the decimal sign to the width if it is after the |
| 2602 |
% decimal sign and there shall be digits after the decimal sign. |
| 2603 |
% \begin{macrocode} |
| 2604 |
\ifx\nprt@argtwo\nprt@aftername |
| 2605 |
\expandafter\ifnum\csname nprt@#1@fixeddigits@after\endcsname>0 |
| 2606 |
\addtolength{\nprt@blockwidth}{\the\nprt@decimalwidth}% |
| 2607 |
\fi |
| 2608 |
\fi |
| 2609 |
} |
| 2610 |
% \end{macrocode} |
| 2611 |
% \end{macro} |
| 2612 |
% |
| 2613 |
% \begin{macro}{\npunit} |
| 2614 |
% The \cs{npunit} command takes as argument a unit that is printed in |
| 2615 |
% every cell of a table when using the (new) |n| or |N| column types. |
| 2616 |
% \begin{macrocode} |
| 2617 |
\newcommand*\npunit[1]{\def\nprt@unit{#1}} |
| 2618 |
% \end{macrocode} |
| 2619 |
% \end{macro} |
| 2620 |
% \begin{macro}{\npnounit} |
| 2621 |
% Initialize \cs{nprt@unit}. |
| 2622 |
% \begin{macrocode} |
| 2623 |
\edef\nprt@unit{\@empty} |
| 2624 |
% \end{macrocode} |
| 2625 |
% \end{macro} |
| 2626 |
% |
| 2627 |
% \begin{macro}{\npafternum} |
| 2628 |
% The \cs{npunit} command takes as argument some text that is printed |
| 2629 |
% after the number in every cell of a table when using the (new) |n| |
| 2630 |
% or |N| column types. |
| 2631 |
% \begin{macrocode} |
| 2632 |
\newcommand*\npafternum[1]{\def\nprt@afternum{#1}} |
| 2633 |
% \end{macrocode} |
| 2634 |
% \end{macro} |
| 2635 |
% \begin{macro}{\nprt@afternum} |
| 2636 |
% Initialize \cs{nprt@afternum}. |
| 2637 |
% \begin{macrocode} |
| 2638 |
\edef\nprt@afternum{\@empty} |
| 2639 |
% \end{macrocode} |
| 2640 |
% \end{macro} |
| 2641 |
% \begin{macro}{\npmakebox} |
| 2642 |
% \changes{1.10}{2003/10/12}{Declare \cs{npmakebox} command}% |
| 2643 |
% The \cs{npmakebox} is similar to the \cs{makebox} command but it |
| 2644 |
% takes a text as first optional argument instead of a length. |
| 2645 |
% The width of the box is calculated by the width of this text. |
| 2646 |
% \begin{macrocode} |
| 2647 |
\DeclareRobustCommand*\npmakebox{% |
| 2648 |
\@ifnextchar[% ] |
| 2649 |
{\nprt@makebox}{\makebox}% |
| 2650 |
} |
| 2651 |
% \end{macrocode} |
| 2652 |
% \end{macro} |
| 2653 |
% \begin{macro}{\nprt@makebox} |
| 2654 |
% The internal part of the \cs{npmakebox} command. |
| 2655 |
% \begin{macrocode} |
| 2656 |
\newcommand*\nprt@makebox{} |
| 2657 |
\def\nprt@makebox[#1]{% |
| 2658 |
\settowidth\@tempdima{#1}% |
| 2659 |
\makebox[\@tempdima]% |
| 2660 |
} |
| 2661 |
% \end{macrocode} |
| 2662 |
% \end{macro} |
| 2663 |
% |
| 2664 |
% \changes{1.10}{2003/10/12}{Define math version \texttt{npbold}}% |
| 2665 |
% Declare a bold math alphabet |npbold| that aligns with normal |
| 2666 |
% digits. |
| 2667 |
% \begin{macrocode} |
| 2668 |
\ifnprt@npbold |
| 2669 |
\DeclareMathVersion{npbold} |
| 2670 |
\SetSymbolFont{operators}{npbold}{OT1}{cmr} {b}{n} |
| 2671 |
\SetSymbolFont{letters} {npbold}{OML}{cmm} {b}{it} |
| 2672 |
\SetSymbolFont{symbols} {npbold}{OMS}{cmsy}{b}{n} |
| 2673 |
\SetMathAlphabet\mathsf{npbold}{OT1}{cmss}{b}{n} |
| 2674 |
\SetMathAlphabet\mathit{npbold}{OT1}{cmr}{b}{it} |
| 2675 |
% \end{macrocode} |
| 2676 |
% \begin{macro}{\npboldmath} |
| 2677 |
% Switch to that bold math alphabet. |
| 2678 |
% \begin{macrocode} |
| 2679 |
\def\npboldmath{\@nomath\npboldmath |
| 2680 |
\mathversion{npbold}} |
| 2681 |
\fi |
| 2682 |
% \end{macrocode} |
| 2683 |
% \end{macro} |
| 2684 |
% |
| 2685 |
% |
| 2686 |
% \subsubsection{Auxilliary routines for the new column types} |
| 2687 |
% |
| 2688 |
% This code has been developed starting from the \texttt{rccol} |
| 2689 |
% package by Eckhart Guth\"ohrlein~\cite{guthoehrlein2000a}. |
| 2690 |
% Some small bugs of that package have been corrected here, too. |
| 2691 |
% |
| 2692 |
% \begin{macro}{\nprt@digittoks} |
| 2693 |
% Token list that will contain all characters of a tabular cell that |
| 2694 |
% are allowed for \cs{numprint}. |
| 2695 |
% \begin{macrocode} |
| 2696 |
\newtoks\nprt@digittoks |
| 2697 |
% \end{macrocode} |
| 2698 |
% \end{macro} |
| 2699 |
% \begin{macro}{\nprt@pretoks} |
| 2700 |
% Token list with all tokens before the number itself. |
| 2701 |
% \begin{macrocode} |
| 2702 |
\newtoks\nprt@pretoks |
| 2703 |
% \end{macrocode} |
| 2704 |
% \end{macro} |
| 2705 |
% \begin{macro}{\nprt@posttoks} |
| 2706 |
% Token list with all tokens after the number itself. |
| 2707 |
% \begin{macrocode} |
| 2708 |
\newtoks\nprt@posttoks |
| 2709 |
% \end{macrocode} |
| 2710 |
% \end{macro} |
| 2711 |
% \begin{macro}{\ifnprt@numfound} |
| 2712 |
% Has the number already been found in the parsing of the tabular |
| 2713 |
% cell? |
| 2714 |
% \begin{macrocode} |
| 2715 |
\newif\ifnprt@numfound |
| 2716 |
% \end{macrocode} |
| 2717 |
% \end{macro} |
| 2718 |
% \begin{macro}{\nprt@begin} |
| 2719 |
% This macro is executed at the begin of each tabular cell. |
| 2720 |
% \begin{macrocode} |
| 2721 |
\def\nprt@begin{% |
| 2722 |
% \end{macrocode} |
| 2723 |
% Initialize the tokens and macros. |
| 2724 |
% \begin{macrocode} |
| 2725 |
\nprt@digittoks={}% |
| 2726 |
\nprt@pretoks={}% |
| 2727 |
\nprt@posttoks={}% |
| 2728 |
\edef\nprt@unit{\@empty}% |
| 2729 |
\edef\nprt@afternum{\@empty}% |
| 2730 |
\nprt@numfoundfalse |
| 2731 |
% \end{macrocode} |
| 2732 |
% Set the allowed characters. |
| 2733 |
% This macro is made empty when the number itself is read-in totally. |
| 2734 |
% \begin{macrocode} |
| 2735 |
\edef\nprt@allowedchars{\nprt@numberlist\nprt@dotlist\nprt@explist |
| 2736 |
\nprt@signlist\nprt@ignorelist}% |
| 2737 |
% \end{macrocode} |
| 2738 |
% Start to parse the tabular cell. |
| 2739 |
% \begin{macrocode} |
| 2740 |
\nprt@getnexttok |
| 2741 |
} |
| 2742 |
% \end{macrocode} |
| 2743 |
% \end{macro} |
| 2744 |
% \begin{macro}{\nprt@saveothertok} |
| 2745 |
% Adds the current token to the list of tokens before or after the |
| 2746 |
% number. |
| 2747 |
% \begin{macrocode} |
| 2748 |
\def\nprt@saveothertok#1{% |
| 2749 |
\ifnprt@numfound |
| 2750 |
% \end{macrocode} |
| 2751 |
% If the number has already been found it is ended now. |
| 2752 |
% This is marked by clearing the list of allowed characters. |
| 2753 |
% \begin{macrocode} |
| 2754 |
\def\nprt@allowedchars{}% |
| 2755 |
\nprt@posttoks=\expandafter{\the\nprt@posttoks#1}% |
| 2756 |
\else |
| 2757 |
\nprt@pretoks=\expandafter{\the\nprt@pretoks#1}% |
| 2758 |
\fi |
| 2759 |
} |
| 2760 |
% \end{macrocode} |
| 2761 |
% \end{macro} |
| 2762 |
% \begin{macro}{\nprt@getnexttok} |
| 2763 |
% \changes{1.31}{2004/08/18}{Bugfix: The numprint column types did not |
| 2764 |
% like empty cells in the last column of a tabular}% |
| 2765 |
% Parse the tabular cell. |
| 2766 |
% The argument is the next token of the tabular cell. |
| 2767 |
% Inside this command, the end of the tabular cell is detected by |
| 2768 |
% different possibilities to end a cell. |
| 2769 |
% \begin{macrocode} |
| 2770 |
\def\nprt@getnexttok#1{% |
| 2771 |
% \end{macrocode} |
| 2772 |
% If the current token is \cs{tabularnewline} or |\\| |
| 2773 |
% (which is the same) the tabular cell is finished. |
| 2774 |
% \begin{macrocode} |
| 2775 |
\ifx\tabularnewline#1% |
| 2776 |
% \end{macrocode} |
| 2777 |
% Redefine the \cs{nprt@next} command that is called at the end of |
| 2778 |
% this command to execute the found \cs{tabularnewline} command. |
| 2779 |
% \begin{macrocode} |
| 2780 |
\let\nprt@next\tabularnewline |
| 2781 |
\else |
| 2782 |
% \end{macrocode} |
| 2783 |
% If this tabular cell is not in the last column and a |&| is found, |
| 2784 |
% the \cs{nprt@end} command is found that is inserted into this cell |
| 2785 |
% using the |<| specifier by the columnn types. |
| 2786 |
% \begin{macrocode} |
| 2787 |
\ifx\end#1% |
| 2788 |
% \end{macrocode} |
| 2789 |
% Redefine \cs{nprt@next} to execute \cs{nprt@end} at the end of this |
| 2790 |
% command. |
| 2791 |
% \begin{macrocode} |
| 2792 |
\let\nprt@next\end |
| 2793 |
\else |
| 2794 |
% \end{macrocode} |
| 2795 |
% If this is the last cell of the tabular, the \cs{end} part of |
| 2796 |
% \cs{end\{tabular\}} or \cs{end\{tabular*\}} is found. |
| 2797 |
% \begin{macrocode} |
| 2798 |
\ifx\nprt@end#1% |
| 2799 |
% \end{macrocode} |
| 2800 |
% Test whether it is the normal or the star version of the |
| 2801 |
% environment. |
| 2802 |
% Is this really necessary? |
| 2803 |
% \begin{macrocode} |
| 2804 |
\let\nprt@next\nprt@end |
| 2805 |
\else |
| 2806 |
% \end{macrocode} |
| 2807 |
% If this is the last cell of the tabular and the tabular has been |
| 2808 |
% called using \cs{tabular} \ldots\ \cs{endtabular} instead of using |
| 2809 |
% the environment call, \cs{endtabular} is found. |
| 2810 |
% \begin{macrocode} |
| 2811 |
\ifx\endtabular#1% |
| 2812 |
\let\nprt@next\endtabular |
| 2813 |
\else |
| 2814 |
% \end{macrocode} |
| 2815 |
% For |tabularx|, a test on \cs{csname} has to be added. |
| 2816 |
% \begin{macrocode} |
| 2817 |
\ifx\csname#1% |
| 2818 |
\let\nprt@next\csname |
| 2819 |
\else |
| 2820 |
% \end{macrocode} |
| 2821 |
% If the last cell of a line is empty, \cs{relax} will be found. |
| 2822 |
% \begin{macrocode} |
| 2823 |
\ifx\relax#1% |
| 2824 |
\let\nprt@next\relax |
| 2825 |
\else |
| 2826 |
% \end{macrocode} |
| 2827 |
% If no command is found that ends the tabular cell, we are not yet at |
| 2828 |
% the end of the cell. |
| 2829 |
% Redefine \cs{nprt@next} to start this command recursively for |
| 2830 |
% parsing the next token. |
| 2831 |
% \begin{macrocode} |
| 2832 |
\let\nprt@next\nprt@getnexttok |
| 2833 |
% \end{macrocode} |
| 2834 |
% Test if this token is one of the allowed characters of a number. |
| 2835 |
% \begin{macrocode} |
| 2836 |
\nprt@IfCharInString{#1}{\nprt@allowedchars}{% |
| 2837 |
% \end{macrocode} |
| 2838 |
% If yes, append this character to the token list of the number and |
| 2839 |
% set the flag that the number has been found. |
| 2840 |
% \begin{macrocode} |
| 2841 |
\nprt@numfoundtrue |
| 2842 |
\nprt@digittoks=\expandafter{\the\nprt@digittoks#1}% |
| 2843 |
}{% |
| 2844 |
% \end{macrocode} |
| 2845 |
% If it is no character of a number, store it for the tokens before or |
| 2846 |
% after the number. |
| 2847 |
% \begin{macrocode} |
| 2848 |
\nprt@saveothertok{#1}% |
| 2849 |
}% |
| 2850 |
\fi % \relax |
| 2851 |
\fi % \csname |
| 2852 |
\fi % \endtabular |
| 2853 |
\fi % \nprt@end |
| 2854 |
\fi % \end |
| 2855 |
\fi % \tabularnewline |
| 2856 |
% \end{macrocode} |
| 2857 |
% Call the previously saved command (recursion or end of the tabular |
| 2858 |
% cell). |
| 2859 |
% \begin{macrocode} |
| 2860 |
\nprt@next |
| 2861 |
} |
| 2862 |
% \end{macrocode} |
| 2863 |
% Boolean to decide if math mode is active outside the tabular cell. |
| 2864 |
% This is true for the |array| environment. |
| 2865 |
% \begin{macrocode} |
| 2866 |
\newif\ifnprt@mathtabular |
| 2867 |
% \end{macrocode} |
| 2868 |
% \end{macro} |
| 2869 |
% \begin{macro}{\nprt@end} |
| 2870 |
% This macro is called at the end of each tabular cell. |
| 2871 |
% The arguments are used as follows: \meta{digits before}, |
| 2872 |
% \meta{digits after} the decimal sign for the mantissa; |
| 2873 |
% \meta{digits before}, \meta{digits after} the decimal sign for the |
| 2874 |
% exponent; commands inserted \meta{before} and \meta{after} the |
| 2875 |
% \cs{numprint} command. |
| 2876 |
% The arguments five and six are empty for printing the number in text |
| 2877 |
% mode and contain ``|$|'' both for printing the number in math mode. |
| 2878 |
% \begin{macrocode} |
| 2879 |
\def\nprt@end#1#2#3#4#5#6{% |
| 2880 |
% \end{macrocode} |
| 2881 |
% First, print the tokens before the number. |
| 2882 |
% \begin{macrocode} |
| 2883 |
\the\nprt@pretoks |
| 2884 |
% \end{macrocode} |
| 2885 |
% Print the number in a group in order to save the tokens before and |
| 2886 |
% after the number to be influenced by its settings. |
| 2887 |
% \begin{macrocode} |
| 2888 |
\begingroup |
| 2889 |
% \end{macrocode} |
| 2890 |
% Set the digits for the alignment of the mantissa. |
| 2891 |
% \begin{macrocode} |
| 2892 |
% \npnodigits |
| 2893 |
\npdigits{#1}{#2}% |
| 2894 |
% \end{macrocode} |
| 2895 |
% Set the digits for the alignment of the exponent if given. |
| 2896 |
% If no number of digits is given, they are set negativ. |
| 2897 |
% \begin{macrocode} |
| 2898 |
\npnoexponentdigits |
| 2899 |
\ifnum#3<0 |
| 2900 |
\nprt@debug{no exponent alignment in tabular}% |
| 2901 |
\else |
| 2902 |
\ifnum#4<0 |
| 2903 |
\nprt@debug{exponent alignment in tabular with #3 digits}% |
| 2904 |
\npexponentdigits{#3}% |
| 2905 |
\else |
| 2906 |
\nprt@debug{exponent alignment in tabular with #3.#4 digits}% |
| 2907 |
\npexponentdigits[#4]{#3}% |
| 2908 |
\fi |
| 2909 |
\fi |
| 2910 |
% \end{macrocode} |
| 2911 |
% Omit the section that prints the number if no number has been |
| 2912 |
% given. |
| 2913 |
% \begin{macrocode} |
| 2914 |
\ifnprt@numfound |
| 2915 |
% \end{macrocode} |
| 2916 |
% Print the pre-command if defined. |
| 2917 |
% Since the pre-command is fixed to nothing or ``|$|'' to switch to |
| 2918 |
% math mode, this is only done if the math mode is not active, |
| 2919 |
% before. |
| 2920 |
% Set the boolean \cs{ifnprt@mathtabular} according to the previous |
| 2921 |
% status in order to close the math mode if necessary. |
| 2922 |
% \begin{macrocode} |
| 2923 |
\ifmmode |
| 2924 |
\nprt@mathtabulartrue |
| 2925 |
\else |
| 2926 |
\nprt@mathtabularfalse |
| 2927 |
#5% |
| 2928 |
\fi |
| 2929 |
% \end{macrocode} |
| 2930 |
% Print the number, with unit if one has been given. |
| 2931 |
% \begin{macrocode} |
| 2932 |
\ifx\nprt@unit\@empty |
| 2933 |
\numprint{\the\nprt@digittoks}% |
| 2934 |
\else |
| 2935 |
\numprint[\nprt@unit]{\the\nprt@digittoks}% |
| 2936 |
\fi |
| 2937 |
% \end{macrocode} |
| 2938 |
% Switch off math mode if it has not been active before. |
| 2939 |
% \begin{macrocode} |
| 2940 |
\ifnprt@mathtabular |
| 2941 |
\else |
| 2942 |
#6% |
| 2943 |
\fi |
| 2944 |
% \end{macrocode} |
| 2945 |
% Print a message to the log file if no number has been specified. |
| 2946 |
% \begin{macrocode} |
| 2947 |
\else |
| 2948 |
\PackageInfo{numprint}{No number in tabular cell}% |
| 2949 |
\fi |
| 2950 |
% \end{macrocode} |
| 2951 |
% Do the rest outside the group in order to prevent the post-texts |
| 2952 |
% from being formatted as the number. |
| 2953 |
% \begin{macrocode} |
| 2954 |
\endgroup |
| 2955 |
% \end{macrocode} |
| 2956 |
% Print the tokens after the number. |
| 2957 |
% \begin{macrocode} |
| 2958 |
\the\nprt@posttoks |
| 2959 |
% \end{macrocode} |
| 2960 |
% Print the contents defined with \cs{npafternum}. |
| 2961 |
% \begin{macrocode} |
| 2962 |
\ifx\nprt@afternum\@empty |
| 2963 |
\else |
| 2964 |
\nprt@afternum |
| 2965 |
\fi |
| 2966 |
} |
| 2967 |
% \end{macrocode} |
| 2968 |
% \end{macro} |
| 2969 |
% |
| 2970 |
% |
| 2971 |
% \subsubsection{New column types} |
| 2972 |
% \changes{1.10}{2003/10/12}{New tabular alignment mechanism}% |
| 2973 |
% |
| 2974 |
% Define the new column types. |
| 2975 |
% \begin{macrocode} |
| 2976 |
\ifnprt@newcolumntype |
| 2977 |
% \end{macrocode} |
| 2978 |
% |
| 2979 |
% Declare a new column type |N| which prints a number in text mode and |
| 2980 |
% does not need to repeat \cs{numprint} in each tabular cell. |
| 2981 |
% This is declared empty because all executing macros are redefined |
| 2982 |
% anyway. |
| 2983 |
% \begin{macrocode} |
| 2984 |
\newcolumntype{N}{} |
| 2985 |
% \end{macrocode} |
| 2986 |
% \begin{macro}{\NC@rewrite@N} |
| 2987 |
% Redefine this command to parse the declaration of the |N| column |
| 2988 |
% type to look for an optional argument. |
| 2989 |
% If none is given, set both optional arguments to ``|-1|''. |
| 2990 |
% \begin{macrocode} |
| 2991 |
\def\NC@rewrite@N{% |
| 2992 |
\nprt@digittoks{}% |
| 2993 |
\nprt@pretoks{}% |
| 2994 |
% \end{macrocode} |
| 2995 |
% If no optional argument is given, set both optional arguments to |
| 2996 |
% ``|-1|''. |
| 2997 |
% \begin{macrocode} |
| 2998 |
\@ifnextchar[{% ] |
| 2999 |
\nprt@rewrite@{}{}% |
| 3000 |
}{% |
| 3001 |
\nprt@rewrite@@{}{}{-1}[-1]% |
| 3002 |
}% |
| 3003 |
} |
| 3004 |
% \end{macrocode} |
| 3005 |
% \end{macro} |
| 3006 |
% Declare a new column type |n| which prints a number and does not |
| 3007 |
% need to repeat \cs{numprint} in each tabular cell. |
| 3008 |
% This is declared empty because all executing macros are redefined |
| 3009 |
% anyway. |
| 3010 |
% \begin{macrocode} |
| 3011 |
\newcolumntype{n}{} |
| 3012 |
% \end{macrocode} |
| 3013 |
% \begin{macro}{\NC@rewrite@n} |
| 3014 |
% Same as \cs{NC@rewrite@N}, but give ``|$|'' twice for math mode. |
| 3015 |
% \begin{macrocode} |
| 3016 |
\def\NC@rewrite@n{% |
| 3017 |
\nprt@digittoks{}% |
| 3018 |
\nprt@pretoks{}% |
| 3019 |
\@ifnextchar[{% ] |
| 3020 |
\nprt@rewrite@{$}{$}% |
| 3021 |
}{% |
| 3022 |
\nprt@rewrite@@{$}{$}{-1}[-1]% |
| 3023 |
}% |
| 3024 |
} |
| 3025 |
% \end{macrocode} |
| 3026 |
% \end{macro} |
| 3027 |
% \begin{macro}{\nprt@rewrite@} |
| 3028 |
% Look for the second optional argument. |
| 3029 |
% \begin{macrocode} |
| 3030 |
\def\nprt@rewrite@#1#2[#3]{% |
| 3031 |
\@ifnextchar[{%] |
| 3032 |
\nprt@rewrite@@{#1}{#2}{#3}% |
| 3033 |
}{% |
| 3034 |
\nprt@rewrite@@{#1}{#2}{#3}[-1]% |
| 3035 |
}% |
| 3036 |
} |
| 3037 |
% \end{macrocode} |
| 3038 |
% \end{macro} |
| 3039 |
% \begin{macro}{\nprt@rewrite@@} |
| 3040 |
% The arguments are used as follows: |
| 3041 |
% commands inserted \meta{before} and \meta{after} the |
| 3042 |
% \cs{numprint} command; \meta{digits before}, \meta{digits after} the |
| 3043 |
% decimal sign for the mantissa; \meta{digits before}, \meta{digits |
| 3044 |
% after} the decimal sign for the exponent. |
| 3045 |
% \begin{macrocode} |
| 3046 |
\def\nprt@rewrite@@#1#2#3[#4]#5#6{% |
| 3047 |
% \end{macrocode} |
| 3048 |
% Add the definition for the current column to the already made column |
| 3049 |
% definitions that are stored in \cs{@temptokena}. |
| 3050 |
% Before the column itself, the starting command for the parsing, |
| 3051 |
% \cs{nprt@begin}, is inserted. |
| 3052 |
% At the end of the column, start the final work, command |
| 3053 |
% \cs{nprt@end}. |
| 3054 |
% These commands shall not be expanded, yet. |
| 3055 |
% \begin{macrocode} |
| 3056 |
\edef\nprt@rewrite@scratch{\the\@temptokena |
| 3057 |
>{\noexpand\nprt@begin\noexpand\ignorespaces}l% |
| 3058 |
<{\noexpand\nprt@end{#5}{#6}{#3}{#4}{#1}{#2}}% |
| 3059 |
}% |
| 3060 |
% \end{macrocode} |
| 3061 |
% Set \cs{@temptokena} to the preceding and the current column |
| 3062 |
% definition. |
| 3063 |
% This is implicitely used by the |array| package. |
| 3064 |
% \begin{macrocode} |
| 3065 |
\@temptokena\expandafter{\nprt@rewrite@scratch}% |
| 3066 |
% \end{macrocode} |
| 3067 |
% Parse for next column in the definition. |
| 3068 |
% \begin{macrocode} |
| 3069 |
\NC@find |
| 3070 |
} |
| 3071 |
% \end{macrocode} |
| 3072 |
% \end{macro} |
| 3073 |
% |
| 3074 |
% |
| 3075 |
% \subsubsection{Old column types for compatibility} |
| 3076 |
% |
| 3077 |
% Define the old column types. |
| 3078 |
% \begin{macrocode} |
| 3079 |
\else |
| 3080 |
% \end{macrocode} |
| 3081 |
% The column type \verb|n| aligns the base number but not the exponent. |
| 3082 |
% \begin{macrocode} |
| 3083 |
\newcolumntype{n}[2]{>{\npdigits{#1}{#2}$}l<{$}} |
| 3084 |
% \end{macrocode} |
| 3085 |
% The column type \verb|N| aligns the base number as well as the exponent. |
| 3086 |
% \begin{macrocode} |
| 3087 |
\newcolumntype{N}[3]{% |
| 3088 |
>{\npdigits{#1}{#2}\npexponentdigits{#3}$}l<{$}% |
| 3089 |
} |
| 3090 |
% \end{macrocode} |
| 3091 |
% End of column type section. |
| 3092 |
% \begin{macrocode} |
| 3093 |
\fi |
| 3094 |
% \end{macrocode} |
| 3095 |
% |
| 3096 |
% |
| 3097 |
% \subsection{Round numbers}% |
| 3098 |
% \label{sec:code:round}% |
| 3099 |
% |
| 3100 |
% Stores if the currenct digit has to be rounded up. |
| 3101 |
% \begin{macrocode} |
| 3102 |
\newif\ifnprt@roundup |
| 3103 |
% \end{macrocode} |
| 3104 |
% Declare the counter used inside \cs{nprt@round@after} and |
| 3105 |
% \cs{nprt@round@before}. |
| 3106 |
% \begin{macrocode} |
| 3107 |
\newcount\nprt@thisdigit |
| 3108 |
% \end{macrocode} |
| 3109 |
% \begin{macro}{\nprt@round@after} |
| 3110 |
% Does the rounding of the number after the decimal sign. |
| 3111 |
% The first argument contains the current digit, the second the rest |
| 3112 |
% of the number. |
| 3113 |
% |
| 3114 |
% This routine is a little bit complicated. |
| 3115 |
% It is called recursively. |
| 3116 |
% In the forward rund, it just counts the number of digits, it has |
| 3117 |
% parsed already. |
| 3118 |
% In the backward rund the rounding is done. |
| 3119 |
% \begin{macrocode} |
| 3120 |
\def\nprt@round@after#1#2\@empty{% |
| 3121 |
% \end{macrocode} |
| 3122 |
% Store the arguments in macros. |
| 3123 |
% \begin{macrocode} |
| 3124 |
\edef\nprt@argone{#1}% |
| 3125 |
\edef\nprt@argtwo{#2}% |
| 3126 |
% \end{macrocode} |
| 3127 |
% Count the parsed digits. |
| 3128 |
% \begin{macrocode} |
| 3129 |
\advance \nprt@curpos by 1 |
| 3130 |
% \end{macrocode} |
| 3131 |
% If the end of the number is reached an internal error has been |
| 3132 |
% occured since enough zeros are appended to the number before. |
| 3133 |
% \begin{macrocode} |
| 3134 |
\ifx\nprt@argone\@empty |
| 3135 |
\nprt@error{Rounding: End of number has been reached}{This may |
| 3136 |
not happen}% |
| 3137 |
\else |
| 3138 |
% \end{macrocode} |
| 3139 |
% If the current digit is one behind the last digit to be printed it |
| 3140 |
% decides if the last printed digit is rounded or not. |
| 3141 |
% This decision is stored in \cs{ifnprt@roundup}. |
| 3142 |
% If this position is reached, stop the recursion. |
| 3143 |
% \begin{macrocode} |
| 3144 |
\ifnum\nprt@curpos>\nprt@rndpos |
| 3145 |
\ifnum\nprt@argone>4 |
| 3146 |
\nprt@rounduptrue |
| 3147 |
\fi |
| 3148 |
\else |
| 3149 |
% \end{macrocode} |
| 3150 |
% The position has not been reached, yet. |
| 3151 |
% Thus, call this routine recursively. |
| 3152 |
% \begin{macrocode} |
| 3153 |
\expandafter\nprt@round@after#2\@empty\@empty |
| 3154 |
% \end{macrocode} |
| 3155 |
% The following lines are executed in the backward run when rounding. |
| 3156 |
% |
| 3157 |
% Store the current digit in a number in order to be able to calculate |
| 3158 |
% with it. |
| 3159 |
% \begin{macrocode} |
| 3160 |
\nprt@thisdigit=#1 |
| 3161 |
% \end{macrocode} |
| 3162 |
% If this number is to be rounded up do it by advancing it by one. |
| 3163 |
% \begin{macrocode} |
| 3164 |
\ifnprt@roundup |
| 3165 |
\advance \nprt@thisdigit by 1 |
| 3166 |
% \end{macrocode} |
| 3167 |
% Reset \cs{ifnprt@roundup} since the preceeding digit is not to be |
| 3168 |
% rounded, normally. |
| 3169 |
% \begin{macrocode} |
| 3170 |
\nprt@roundupfalse |
| 3171 |
% \end{macrocode} |
| 3172 |
% If the digit has been rounded from 9 to 10, it has to be a ``0'' and |
| 3173 |
% the preceeding digit has to be rounded up. |
| 3174 |
% \begin{macrocode} |
| 3175 |
\ifnum\nprt@thisdigit=10 |
| 3176 |
\nprt@thisdigit=0 |
| 3177 |
\nprt@rounduptrue |
| 3178 |
\fi |
| 3179 |
\fi |
| 3180 |
% \end{macrocode} |
| 3181 |
% Store the modificated current digit to the new number by putting it |
| 3182 |
% into \cs{nprt@newnum} before all digits that have been stored |
| 3183 |
% before. |
| 3184 |
% \begin{macrocode} |
| 3185 |
\expandafter\xdef\expandafter\nprt@newnum{% |
| 3186 |
\the\nprt@thisdigit\nprt@newnum}% |
| 3187 |
\fi |
| 3188 |
\fi |
| 3189 |
} |
| 3190 |
% \end{macrocode} |
| 3191 |
% \end{macro} |
| 3192 |
% \begin{macro}{\nprt@round@before} |
| 3193 |
% Does the rounding of the number after the decimal sign. |
| 3194 |
% The first argument contains the current digit, the second the rest |
| 3195 |
% of the number. |
| 3196 |
% This routine works as \cs{nprt@round@after} but stops at its end in |
| 3197 |
% contrast to a given number. |
| 3198 |
% \begin{macrocode} |
| 3199 |
\def\nprt@round@before#1#2\@empty{% |
| 3200 |
% \end{macrocode} |
| 3201 |
% Store the arguments. |
| 3202 |
% \begin{macrocode} |
| 3203 |
\edef\nprt@argone{#1}% |
| 3204 |
\edef\nprt@argtwo{#2}% |
| 3205 |
% \end{macrocode} |
| 3206 |
% Do the recursion until the end of the number. |
| 3207 |
% This routine does not have to decide whether the number has to be |
| 3208 |
% rounded since it knows that by \cs{ifnprt@roundup}, set by |
| 3209 |
% \cs{nprt@round@after}. |
| 3210 |
% \begin{macrocode} |
| 3211 |
\ifx\nprt@argtwo\@empty |
| 3212 |
\else |
| 3213 |
\expandafter\nprt@round@before#2\@empty |
| 3214 |
\fi |
| 3215 |
% \end{macrocode} |
| 3216 |
% Store the current digit into a counter and use zero if the number |
| 3217 |
% before the decimal sign is empty. |
| 3218 |
% \begin{macrocode} |
| 3219 |
\ifx\nprt@argone\@empty |
| 3220 |
\nprt@thisdigit=0 |
| 3221 |
\else |
| 3222 |
\nprt@thisdigit=#1 |
| 3223 |
\fi |
| 3224 |
% \end{macrocode} |
| 3225 |
% Add one to the number if it has to be rounded. |
| 3226 |
% \begin{macrocode} |
| 3227 |
\ifnprt@roundup |
| 3228 |
\advance \nprt@thisdigit by 1 |
| 3229 |
% \end{macrocode} |
| 3230 |
% Reset the rounding of the next number. |
| 3231 |
% \begin{macrocode} |
| 3232 |
\nprt@roundupfalse |
| 3233 |
% \end{macrocode} |
| 3234 |
% If rounded from 9 to 10, set this digit to ``0'' and give the |
| 3235 |
% information to the next digit. |
| 3236 |
% \begin{macrocode} |
| 3237 |
\ifnum\nprt@thisdigit=10 |
| 3238 |
\nprt@thisdigit=0 |
| 3239 |
\nprt@rounduptrue |
| 3240 |
\fi |
| 3241 |
\fi |
| 3242 |
% \end{macrocode} |
| 3243 |
% If the number is empty, the new number has to be added and the |
| 3244 |
% counter adjusted. |
| 3245 |
% \begin{macrocode} |
| 3246 |
\ifx\nprt@argone\@empty |
| 3247 |
\xdef\nprt@newnum{\the\nprt@thisdigit}% |
| 3248 |
% \stepcounter{nprt@\nprt@numname @digitsbefore}% |
| 3249 |
\advance\csname c@nprt@\nprt@numname @digitsbefore\endcsname 1\relax |
| 3250 |
\else |
| 3251 |
% \end{macrocode} |
| 3252 |
% Insert the current digit before the already stored digits in |
| 3253 |
% \cs{nprt@newnum}. |
| 3254 |
% \begin{macrocode} |
| 3255 |
\expandafter\xdef\expandafter\nprt@newnum{% |
| 3256 |
\the\nprt@thisdigit\nprt@newnum}% |
| 3257 |
\fi |
| 3258 |
} |
| 3259 |
% \end{macrocode} |
| 3260 |
% \end{macro} |
| 3261 |
% Two new counters for the round position and the current postion in |
| 3262 |
% \cs{nprt@round@after}. |
| 3263 |
% \begin{macrocode} |
| 3264 |
\newcount\nprt@curpos |
| 3265 |
\newcount\nprt@rndpos |
| 3266 |
% \end{macrocode} |
| 3267 |
% \begin{macro}{\nprt@round} |
| 3268 |
% Round a number. |
| 3269 |
% The first argument is the Number type (``mantissa'' resp.\ |
| 3270 |
% ``exponent''), the second is the number of digits to be printed |
| 3271 |
% after the decimal sign. |
| 3272 |
% \begin{macrocode} |
| 3273 |
\newcommand*\nprt@round[2]{% |
| 3274 |
\begingroup |
| 3275 |
% \end{macrocode} |
| 3276 |
% Store the Number type for use in \cs{nprt@round@before} and |
| 3277 |
% \cs{nprt@round@after}. |
| 3278 |
% \begin{macrocode} |
| 3279 |
\edef\nprt@numname{#1}% |
| 3280 |
% \end{macrocode} |
| 3281 |
% If the number of printed digits after the decimal sign is negative, |
| 3282 |
% no rounding will be performed. |
| 3283 |
% \begin{macrocode} |
| 3284 |
\ifnum#2<0 |
| 3285 |
\else |
| 3286 |
% \end{macrocode} |
| 3287 |
% Print a debug message. |
| 3288 |
% \begin{macrocode} |
| 3289 |
\nprt@debug{\string\nprt@round: Round after #2 digits for #1}% |
| 3290 |
% \end{macrocode} |
| 3291 |
% Set the number of digits after the decimal sign to the given value |
| 3292 |
% since this number of digits will be printed later. |
| 3293 |
% \begin{macrocode} |
| 3294 |
\setcounter{nprt@#1@digitsafter}{#2}% |
| 3295 |
% \end{macrocode} |
| 3296 |
% Append enough zeros to the after-decimal-sign part in order to have |
| 3297 |
% enough digits that \cs{nprt@round@after} will not reach the end of |
| 3298 |
% the number. |
| 3299 |
% \begin{macrocode} |
| 3300 |
\expandafter\g@addto@macro\csname nprt@#1@after\endcsname{% |
| 3301 |
\nprt@roundnull}% |
| 3302 |
% \end{macrocode} |
| 3303 |
% Set the number of digits after the decimal sign. |
| 3304 |
% \begin{macrocode} |
| 3305 |
\nprt@rndpos=#2 |
| 3306 |
% \end{macrocode} |
| 3307 |
% Default not to round. |
| 3308 |
% \begin{macrocode} |
| 3309 |
\nprt@roundupfalse |
| 3310 |
% \end{macrocode} |
| 3311 |
% Define the ``working'' number for the subroutines. |
| 3312 |
% \begin{macrocode} |
| 3313 |
\edef\nprt@tmpnum{\csname nprt@#1@after\endcsname}% |
| 3314 |
% \end{macrocode} |
| 3315 |
% The new number starts empty and will be filled by |
| 3316 |
% \cs{nprt@round@after}. |
| 3317 |
% \begin{macrocode} |
| 3318 |
\edef\nprt@newnum{}% |
| 3319 |
% \end{macrocode} |
| 3320 |
% Do the rounding after the decimal sign. |
| 3321 |
% \begin{macrocode} |
| 3322 |
\expandafter\nprt@round@after\nprt@tmpnum\@empty\@empty |
| 3323 |
% \end{macrocode} |
| 3324 |
% Copy the new number after the decimal sign to the ``official'' |
| 3325 |
% command storing it. |
| 3326 |
% \begin{macrocode} |
| 3327 |
\expandafter\xdef\csname nprt@#1@after\endcsname{\nprt@newnum}% |
| 3328 |
% \end{macrocode} |
| 3329 |
% If the integer part has to be modificated, too, do it. |
| 3330 |
% \begin{macrocode} |
| 3331 |
\ifnprt@roundup |
| 3332 |
% \end{macrocode} |
| 3333 |
% Copy the number to the working number. |
| 3334 |
% \begin{macrocode} |
| 3335 |
\edef\nprt@tmpnum{\csname nprt@#1@before\endcsname}% |
| 3336 |
% \end{macrocode} |
| 3337 |
% Clear the new number. |
| 3338 |
% \begin{macrocode} |
| 3339 |
\edef\nprt@newnum{}% |
| 3340 |
% \end{macrocode} |
| 3341 |
% Do the rounding before the decimal sign. |
| 3342 |
% \begin{macrocode} |
| 3343 |
\expandafter\nprt@round@before\nprt@tmpnum\@empty\@empty |
| 3344 |
% \end{macrocode} |
| 3345 |
% If the first digit has been rounded up from 9 a new digit ``1'' has |
| 3346 |
% to be inserted before the number. |
| 3347 |
% \begin{macrocode} |
| 3348 |
\ifnprt@roundup |
| 3349 |
\expandafter\xdef\expandafter\nprt@newnum{1\nprt@newnum}% |
| 3350 |
% \stepcounter{nprt@#1@digitsbefore}% |
| 3351 |
\advance\csname c@nprt@#1@digitsbefore\endcsname by 1\relax |
| 3352 |
\fi |
| 3353 |
% \end{macrocode} |
| 3354 |
% Copy the new number before the decimal sign to the ``official'' |
| 3355 |
% command storing it. |
| 3356 |
% \begin{macrocode} |
| 3357 |
\expandafter\xdef\csname nprt@#1@before\endcsname{\nprt@newnum}% |
| 3358 |
\fi |
| 3359 |
\fi |
| 3360 |
\endgroup |
| 3361 |
% \end{macrocode} |
| 3362 |
% Set the boolean for a found decimal sign according to the number of |
| 3363 |
% printed decimals. |
| 3364 |
% \begin{macrocode} |
| 3365 |
\ifnum#2<0 |
| 3366 |
\else |
| 3367 |
% \end{macrocode} |
| 3368 |
% If rounded to no digits after the decimal sign, switch off printing |
| 3369 |
% of it. |
| 3370 |
% \begin{macrocode} |
| 3371 |
\ifnum#2=0 |
| 3372 |
\csname nprt@#1@decimalfoundfalse\endcsname |
| 3373 |
\else |
| 3374 |
% \end{macrocode} |
| 3375 |
% If one or more digits are printed, a decimal sign has to be printed. |
| 3376 |
% \begin{macrocode} |
| 3377 |
\csname nprt@#1@decimalfoundtrue\endcsname |
| 3378 |
\fi |
| 3379 |
\fi |
| 3380 |
}% |
| 3381 |
% \end{macrocode} |
| 3382 |
% \end{macro} |
| 3383 |
% \begin{macro}{\nprt@lpad} |
| 3384 |
% Pad a number with a character on the left side. |
| 3385 |
% The first argument contains the number, the second is the desired length |
| 3386 |
% and the third the padding character. |
| 3387 |
% \begin{macrocode} |
| 3388 |
\newcommand*\nprt@lpad[3]{% |
| 3389 |
% \end{macrocode} |
| 3390 |
% If the count of digits is negative, no padding will be performed. |
| 3391 |
% \begin{macrocode} |
| 3392 |
\ifnum#2<0 |
| 3393 |
\else |
| 3394 |
% \end{macrocode} |
| 3395 |
% Print a debug message. |
| 3396 |
% \begin{macrocode} |
| 3397 |
\nprt@debug{\string\nprt@lpad: Padding #1 with #3 to a length of #2}% |
| 3398 |
% \end{macrocode} |
| 3399 |
% If the number has less than the desired length, add the padding character |
| 3400 |
% to the left and call this function recursively. |
| 3401 |
% \begin{macrocode} |
| 3402 |
\ifnum\csname thenprt@#1@digitsbefore\endcsname<#2 |
| 3403 |
\expandafter\xdef\csname nprt@#1@before\endcsname{% |
| 3404 |
#3\csname nprt@#1@before\endcsname}% |
| 3405 |
% \stepcounter{nprt@#1@digitsbefore}% |
| 3406 |
\advance\csname c@nprt@#1@digitsbefore\endcsname by 1\relax |
| 3407 |
\nprt@lpad{#1}{#2}{#3}% |
| 3408 |
\fi |
| 3409 |
\fi |
| 3410 |
}% |
| 3411 |
% \end{macrocode} |
| 3412 |
% \end{macro} |
| 3413 |
% |
| 3414 |
% |
| 3415 |
% \subsection{Print the numbers} |
| 3416 |
% |
| 3417 |
% \begin{macro}{\nprt@sign@+} |
| 3418 |
% \begin{macro}{\nprt@sign@-} |
| 3419 |
% \begin{macro}{\nprt@sign@+-} |
| 3420 |
% Define commands for printing the signs in math mode. This ensures |
| 3421 |
% that the printed signs really are signs and not hyphens. Compare |
| 3422 |
% ``-'' to ``\ensuremath{-}''. |
| 3423 |
% \changes{1.39}{2012/08/20}{Move group around sign into the specific |
| 3424 |
% sign macros in order to allow colour again}% |
| 3425 |
% \begin{macrocode} |
| 3426 |
\expandafter\newcommand\csname nprt@sign@+\endcsname{{\ensuremath{+}}} |
| 3427 |
\expandafter\newcommand\csname nprt@sign@-\endcsname{{\ensuremath{-}}} |
| 3428 |
\expandafter\newcommand\csname nprt@sign@+-\endcsname{{\ensuremath{\pm}}} |
| 3429 |
% \end{macrocode} |
| 3430 |
% \end{macro} |
| 3431 |
% \end{macro} |
| 3432 |
% \end{macro} |
| 3433 |
% \begin{macro}{\nprt@printsign} |
| 3434 |
% Print a sign. |
| 3435 |
% The first argument contains the number type (``mantissa'' or |
| 3436 |
% ``exponent''). |
| 3437 |
% The second argument contains the sign as in source code. |
| 3438 |
% \begin{macrocode} |
| 3439 |
\newcommand*\nprt@printsign[2]{% |
| 3440 |
% \end{macrocode} |
| 3441 |
% Write sign to log file. |
| 3442 |
% \begin{macrocode} |
| 3443 |
\nprt@debug{\string\nprt@printsign: `#2'}% |
| 3444 |
% \end{macrocode} |
| 3445 |
% Set command in a group to prevent the defined macros from being |
| 3446 |
% global. |
| 3447 |
% \begin{macrocode} |
| 3448 |
\edef\nprt@marg{#2}% |
| 3449 |
% \end{macrocode} |
| 3450 |
% If a plus is to be added do it if no sign given. |
| 3451 |
% \begin{macrocode} |
| 3452 |
\csname ifnprt@addplus@#1\endcsname |
| 3453 |
\ifx\nprt@marg\@empty |
| 3454 |
\edef\nprt@marg{+}% |
| 3455 |
\fi |
| 3456 |
\fi |
| 3457 |
% \end{macrocode} |
| 3458 |
% Do nothing if still no sign given. |
| 3459 |
% \begin{macrocode} |
| 3460 |
\ifx\nprt@marg\@empty |
| 3461 |
\else |
| 3462 |
% \end{macrocode} |
| 3463 |
% If a macro \cs{nprt@sign@\meta{sign}} is defined for the given sign, |
| 3464 |
% e.g., \cs{nprt@sign@+}, print it; if not, print the sign itself. |
| 3465 |
% \changes{1.22}{2004/08/08}{Print sign in a group to avoid additional space |
| 3466 |
% for an operator (for nbaseprt)}% |
| 3467 |
% \changes{1.39}{2012/08/20}{Move group around sign into the specific |
| 3468 |
% sign macros in order to allow colour again}% |
| 3469 |
% \begin{macrocode} |
| 3470 |
\@ifundefined{nprt@sign@\nprt@marg}{% |
| 3471 |
\PackageWarning{numprint}{% |
| 3472 |
Unknown sign `\nprt@marg'. Print as typed in}% |
| 3473 |
\nprt@marg |
| 3474 |
}{% |
| 3475 |
\csname nprt@sign@\nprt@marg\endcsname% |
| 3476 |
}% |
| 3477 |
\fi |
| 3478 |
} |
| 3479 |
% \end{macrocode} |
| 3480 |
% \end{macro} |
| 3481 |
% Internal counters for printing. |
| 3482 |
% \begin{macrocode} |
| 3483 |
\newcounter{nprt@digitsfirstblock} |
| 3484 |
\newcounter{nprt@blockcnt} |
| 3485 |
% \end{macrocode} |
| 3486 |
% Internal boolean. |
| 3487 |
% \begin{macrocode} |
| 3488 |
\newif\ifnprt@shortnumber |
| 3489 |
% \end{macrocode} |
| 3490 |
% \begin{macro}{\nprt@printbefore} |
| 3491 |
% Print the number before the decimal sign. |
| 3492 |
% The argument is the Number type (``mantissa'' or ``exponent''). |
| 3493 |
% When this macro is called, everything is parsed already. |
| 3494 |
% Thus, it is known whether a decimal sign has been found, which and |
| 3495 |
% how many digits are before resp.\ after the decimal sign etc. |
| 3496 |
% \begin{macrocode} |
| 3497 |
\newcommand*\nprt@printbefore[1]{% |
| 3498 |
% \end{macrocode} |
| 3499 |
% If missing zeros shall be added and there is no digit before the |
| 3500 |
% decimal sign store that ``0'' into the corresponding command and |
| 3501 |
% store in the counter that the number of digits before the decimal |
| 3502 |
% sign is one, know. |
| 3503 |
% \begin{macrocode} |
| 3504 |
\ifnprt@addmissingzero |
| 3505 |
\ifnum\csname thenprt@#1@digitsbefore\endcsname=0 |
| 3506 |
\expandafter\edef\csname nprt@#1@before\endcsname{0}% |
| 3507 |
% \stepcounter{nprt@#1@digitsbefore}% |
| 3508 |
\advance\csname c@nprt@#1@digitsbefore\endcsname by 1\relax |
| 3509 |
\fi |
| 3510 |
\fi |
| 3511 |
% \end{macrocode} |
| 3512 |
% I'm not sure why I have added the group here. |
| 3513 |
% But it works and I won't change it, therefore. |
| 3514 |
% \begin{macrocode} |
| 3515 |
\begingroup |
| 3516 |
% \end{macrocode} |
| 3517 |
% Store the number to be printed in \cs{nprt@numbertoprint} in order |
| 3518 |
% to have simpler calls in this routine than using \cs{csname}\ldots |
| 3519 |
% \begin{macrocode} |
| 3520 |
\edef\nprt@numbertoprint{\csname nprt@#1@before\endcsname}% |
| 3521 |
% \end{macrocode} |
| 3522 |
% If four-digit numbers are not to be separated and both, the integer |
| 3523 |
% and the real parts, are shorter than 5 digits, set the boolean |
| 3524 |
% \cs{ifnprt@shortnumber} to ``true'' that the number is printed |
| 3525 |
% without separators, later. |
| 3526 |
% \begin{macrocode} |
| 3527 |
\ifnprt@numsepfour |
| 3528 |
\else |
| 3529 |
\ifnum\csname thenprt@#1@digitsbefore\endcsname<5 |
| 3530 |
\ifnum\csname thenprt@#1@digitsafter\endcsname<5 |
| 3531 |
\nprt@shortnumbertrue |
| 3532 |
\fi |
| 3533 |
\fi |
| 3534 |
\fi |
| 3535 |
% \end{macrocode} |
| 3536 |
% If the number is short according to the preceeding code, just print |
| 3537 |
% that number by calling \cs{nprt@numbertoprint}. |
| 3538 |
% \begin{macrocode} |
| 3539 |
\ifnprt@shortnumber |
| 3540 |
\nprt@numbertoprint |
| 3541 |
\else |
| 3542 |
% \end{macrocode} |
| 3543 |
% If the number will get separators, calculate how many separators |
| 3544 |
% will be inserted. |
| 3545 |
% \begin{macrocode} |
| 3546 |
% ganze Bloecke |
| 3547 |
\setcounter{nprt@blockcnt}{% |
| 3548 |
\csname thenprt@#1@digitsbefore\endcsname}% |
| 3549 |
\advance\c@nprt@blockcnt by -1\relax |
| 3550 |
\divide\c@nprt@blockcnt 3% |
| 3551 |
% \end{macrocode} |
| 3552 |
% Then, calculate how many digits are in the first block (one, two, or |
| 3553 |
% three). |
| 3554 |
% Use \cs{c@nprt@cntprint} as temporary variable. |
| 3555 |
% \begin{macrocode} |
| 3556 |
\setcounter{nprt@digitsfirstblock}{% |
| 3557 |
\csname thenprt@#1@digitsbefore\endcsname}% |
| 3558 |
\setcounter{nprt@cntprint}{\thenprt@blockcnt}% |
| 3559 |
\multiply \c@nprt@cntprint 3% |
| 3560 |
\advance\c@nprt@digitsfirstblock by -\thenprt@cntprint\relax |
| 3561 |
% \end{macrocode} |
| 3562 |
% Depending on that number, call \cs{nprt@printone}, |
| 3563 |
% \cs{nprt@printtwo}, resp.\ \cs{nprt@printthree} which do what you |
| 3564 |
% may expect with that names. |
| 3565 |
% \begin{macrocode} |
| 3566 |
\ifnum\thenprt@digitsfirstblock=1 |
| 3567 |
\expandafter\nprt@printone\nprt@numbertoprint\@empty |
| 3568 |
\else |
| 3569 |
\ifnum\thenprt@digitsfirstblock=2 |
| 3570 |
\expandafter\nprt@printtwo\nprt@numbertoprint\@empty |
| 3571 |
\else |
| 3572 |
\ifnum\thenprt@digitsfirstblock=3 |
| 3573 |
\expandafter\nprt@printthree\nprt@numbertoprint\@empty |
| 3574 |
\else |
| 3575 |
\ifnum\thenprt@digitsfirstblock=0 |
| 3576 |
\else |
| 3577 |
\PackageError{numprint}{internal error}{}% |
| 3578 |
\fi |
| 3579 |
\fi |
| 3580 |
\fi |
| 3581 |
\fi |
| 3582 |
\fi |
| 3583 |
\endgroup |
| 3584 |
} |
| 3585 |
% \end{macrocode} |
| 3586 |
% \end{macro} |
| 3587 |
% \begin{macro}{\nprt@printthree} |
| 3588 |
% Print three digits. |
| 3589 |
% If the command has not reached the end of the string, print a |
| 3590 |
% separator \cs{nprt@separator@before} and call this routine |
| 3591 |
% recursively. |
| 3592 |
% Surprisingly, this routine does not work if |#1#2#3| is the first |
| 3593 |
% command in some cases. |
| 3594 |
% Thus, \cs{def}cs{nprt@tmp} has been moved in front of it. |
| 3595 |
% Make sure that this works in all cases. |
| 3596 |
% Same applies for \cs{nprt@printtwo}, \cs{nprt@printone}, and |
| 3597 |
% \cs{nprt@printthreeafter}. |
| 3598 |
% \begin{macrocode} |
| 3599 |
\def\nprt@printthree#1#2#3#4\@empty{% |
| 3600 |
\def\nprt@tmp{#4}% |
| 3601 |
#1#2#3% |
| 3602 |
\ifx\nprt@tmp\empty |
| 3603 |
\else |
| 3604 |
\nprt@separator@before% |
| 3605 |
\nprt@printthree#4\@empty\@empty\@empty |
| 3606 |
\fi |
| 3607 |
} |
| 3608 |
% \end{macrocode} |
| 3609 |
% \end{macro} |
| 3610 |
% \begin{macro}{\nprt@printtwo} |
| 3611 |
% The same but start with two instead of three digits. |
| 3612 |
% \begin{macrocode} |
| 3613 |
\def\nprt@printtwo#1#2#3\@empty{% |
| 3614 |
\def\nprt@tmp{#3}% |
| 3615 |
#1#2% |
| 3616 |
\ifx\nprt@tmp\empty |
| 3617 |
\else |
| 3618 |
\nprt@separator@before% |
| 3619 |
\nprt@printthree#3\@empty\@empty\@empty |
| 3620 |
\fi |
| 3621 |
} |
| 3622 |
% \end{macrocode} |
| 3623 |
% \end{macro} |
| 3624 |
% \begin{macro}{\nprt@printone} |
| 3625 |
% The same but start with one instead of three digits. |
| 3626 |
% \begin{macrocode} |
| 3627 |
\def\nprt@printone#1#2\@empty{% |
| 3628 |
\def\nprt@tmp{#2}% |
| 3629 |
#1% |
| 3630 |
\ifx\nprt@tmp\empty |
| 3631 |
\else |
| 3632 |
\nprt@separator@before% |
| 3633 |
\nprt@printthree#2\@empty\@empty\@empty |
| 3634 |
\fi |
| 3635 |
} |
| 3636 |
% \end{macrocode} |
| 3637 |
% \end{macro} |
| 3638 |
% \begin{macro}{\nprt@printafter} |
| 3639 |
% Print the number after the decimal sign. |
| 3640 |
% The argument is the Number type (``mantissa'' or ``exponent''). |
| 3641 |
% This macro works similarly as \cs{nprt@printbefore}. |
| 3642 |
% \begin{macrocode} |
| 3643 |
\newcommand*\nprt@printafter[1]{% |
| 3644 |
% \end{macrocode} |
| 3645 |
% If a missing zero shall be added do it if no digits are given after |
| 3646 |
% the decimal sign if a decimal sign has been given. |
| 3647 |
% If no decimal sign has been given, the number is pure integer and |
| 3648 |
% does not get a real part. |
| 3649 |
% \begin{macrocode} |
| 3650 |
\csname ifnprt@#1@decimalfound\endcsname |
| 3651 |
\ifnprt@addmissingzero |
| 3652 |
\ifnum\csname thenprt@#1@digitsafter\endcsname=0 |
| 3653 |
\expandafter\edef\csname nprt@#1@after\endcsname{0}% |
| 3654 |
% \stepcounter{nprt@#1@digitsafter}% |
| 3655 |
\advance\csname c@nprt@#1@digitsafter\endcsname by 1\relax |
| 3656 |
\fi |
| 3657 |
\fi |
| 3658 |
% \end{macrocode} |
| 3659 |
% If a after-decimal zero will be replaced by another command but the |
| 3660 |
% real part is empty, put a ``0'' after the comma (same as |
| 3661 |
% ``addmissingzero'', but here it is just a hack in order to enable |
| 3662 |
% the replacement command to take effect later). |
| 3663 |
% \begin{macrocode} |
| 3664 |
\ifx\nprt@replacenull\@empty |
| 3665 |
\else |
| 3666 |
\ifnum\csname thenprt@#1@digitsafter\endcsname=0 |
| 3667 |
\expandafter\edef\csname nprt@#1@after\endcsname{0}% |
| 3668 |
% \stepcounter{nprt@#1@digitsafter}% |
| 3669 |
\advance\csname c@nprt@#1@digitsafter\endcsname by 1\relax |
| 3670 |
\fi |
| 3671 |
\fi |
| 3672 |
\fi |
| 3673 |
% \end{macrocode} |
| 3674 |
% Store the number in \cs{nprt@numbertoprint} and continue only if it |
| 3675 |
% is not empty. |
| 3676 |
% \begin{macrocode} |
| 3677 |
\begingroup |
| 3678 |
\edef\nprt@numbertoprint{\csname nprt@#1@after\endcsname}% |
| 3679 |
\ifx\nprt@numbertoprint\@empty |
| 3680 |
\else |
| 3681 |
% \end{macrocode} |
| 3682 |
% Find out whether separators have to be inserted. |
| 3683 |
% \begin{macrocode} |
| 3684 |
\ifnprt@numsepfour |
| 3685 |
\else |
| 3686 |
\ifnum\csname thenprt@#1@digitsbefore\endcsname<5 |
| 3687 |
\ifnum\csname thenprt@#1@digitsafter\endcsname<5 |
| 3688 |
\nprt@shortnumbertrue |
| 3689 |
\fi |
| 3690 |
\fi |
| 3691 |
\fi |
| 3692 |
% \end{macrocode} |
| 3693 |
% If a zero has to be replaced by a replacement text, and if the after |
| 3694 |
% comma part has the numerical value ``0'' (= it contains of zeros |
| 3695 |
% only), do the replacement. |
| 3696 |
% \begin{macrocode} |
| 3697 |
\ifx\nprt@replacenull\@empty |
| 3698 |
\else |
| 3699 |
\ifnum\nprt@numbertoprint=0 |
| 3700 |
\nprt@shortnumbertrue |
| 3701 |
\edef\nprt@numbertoprint{\nprt@replacenull}% |
| 3702 |
\fi |
| 3703 |
\fi |
| 3704 |
% \end{macrocode} |
| 3705 |
% If the number is short (without separators) just print it. |
| 3706 |
% \begin{macrocode} |
| 3707 |
\ifnprt@shortnumber |
| 3708 |
\nprt@numbertoprint |
| 3709 |
\else |
| 3710 |
% \end{macrocode} |
| 3711 |
% Print the number with separators. |
| 3712 |
% The choice between different block sizes does not have to be done |
| 3713 |
% because the after-decimal-sign part starts with three-digit block |
| 3714 |
% from the left end. |
| 3715 |
% \begin{macrocode} |
| 3716 |
\expandafter\nprt@printthree@after% |
| 3717 |
\nprt@numbertoprint\@empty\@empty\@empty |
| 3718 |
\fi |
| 3719 |
\fi |
| 3720 |
\endgroup |
| 3721 |
} |
| 3722 |
% \end{macrocode} |
| 3723 |
% \end{macro} |
| 3724 |
% \begin{macro}{\nprt@printthree@after} |
| 3725 |
% The same as \cs{nprt@printthree} but with another separator. |
| 3726 |
% \begin{macrocode} |
| 3727 |
\def\nprt@printthree@after#1#2#3#4\@empty{% |
| 3728 |
\def\nprt@tmp{#4}% |
| 3729 |
#1#2#3% |
| 3730 |
\ifx\nprt@tmp\empty |
| 3731 |
\else |
| 3732 |
\nprt@separator@after |
| 3733 |
\nprt@printthree@after#4\@empty\@empty\@empty |
| 3734 |
\fi |
| 3735 |
} |
| 3736 |
% \end{macrocode} |
| 3737 |
% \end{macro} |
| 3738 |
% |
| 3739 |
% |
| 3740 |
% \subsection{The main command}% |
| 3741 |
% \label{sec:code:main}% |
| 3742 |
% |
| 3743 |
% \begin{macro}{\numprint} |
| 3744 |
% The main macro of the package. |
| 3745 |
% The mandatory argument takes a number and prints it as described |
| 3746 |
% above. |
| 3747 |
% The optional argument may contain a unit which then is printed, |
| 3748 |
% too. |
| 3749 |
% \begin{macrocode} |
| 3750 |
\DeclareRobustCommand*\numprint[2][\@empty]{% |
| 3751 |
% \end{macrocode} |
| 3752 |
% Switch off the error flag. |
| 3753 |
% This should not be necessary but is done for stability reasons. |
| 3754 |
% \begin{macrocode} |
| 3755 |
\nprt@argumenterrorfalse |
| 3756 |
% \end{macrocode} |
| 3757 |
% Clear the mantissa and the exponent. |
| 3758 |
% \begin{macrocode} |
| 3759 |
\xdef\nprt@exponent{\@empty}% |
| 3760 |
\xdef\nprt@mantissa{\@empty}% |
| 3761 |
% \end{macrocode} |
| 3762 |
% Do everything inside a group to avoid defining too many temporary |
| 3763 |
% macros that are not deleted after the macro. |
| 3764 |
% \begin{macrocode} |
| 3765 |
\begingroup |
| 3766 |
% \end{macrocode} |
| 3767 |
% Store the mandatory argument into a macro. |
| 3768 |
% Redefine \cs{,} and |~| to do nothing as to ignore them. |
| 3769 |
% Because the argument is expanded this does not work with the ignore |
| 3770 |
% list for characters. |
| 3771 |
% This again has to be done inside a group to preserve the two macros |
| 3772 |
% for later usage. |
| 3773 |
% \begin{macrocode} |
| 3774 |
\begingroup |
| 3775 |
\def\,{}% |
| 3776 |
\catcode`\~=\active % tilde is active |
| 3777 |
\def~{}% |
| 3778 |
\xdef\nprt@marg{#2}% |
| 3779 |
\endgroup |
| 3780 |
% \end{macrocode} |
| 3781 |
% Don't expand the unit because that may cause trouble. |
| 3782 |
% \begin{macrocode} |
| 3783 |
\def\nprt@oarg{#1}% |
| 3784 |
% \end{macrocode} |
| 3785 |
% Declare some commands to detect empty arguments. |
| 3786 |
% \begin{macrocode} |
| 3787 |
\def\nprt@@empty{\@empty}% |
| 3788 |
\def\nprt@nix{}% |
| 3789 |
\def\nprt@nixleer{ }% |
| 3790 |
% \end{macrocode} |
| 3791 |
% Some debug information. |
| 3792 |
% \begin{macrocode} |
| 3793 |
\ifx\nprt@oarg\nprt@@empty |
| 3794 |
\nprt@debug{\string\numprint{\protect#2}}% |
| 3795 |
\else |
| 3796 |
\nprt@debug{\string\numprint[\protect#1]{\protect#2}}% |
| 3797 |
\fi |
| 3798 |
% \end{macrocode} |
| 3799 |
% Test for an empty mandatory argument. |
| 3800 |
% \begin{macrocode} |
| 3801 |
\ifx\nprt@marg\nprt@nix |
| 3802 |
\nprt@error{empty argument}{You have to specify a number in |
| 3803 |
the argument of \string\numprint}% |
| 3804 |
\fi |
| 3805 |
\ifx\nprt@marg\nprt@nixleer |
| 3806 |
\nprt@error{empty argument}{You have to specify a number in |
| 3807 |
the argument of \string\numprint}% |
| 3808 |
\fi |
| 3809 |
% \end{macrocode} |
| 3810 |
% Test whether only valid characters have been used and devide the |
| 3811 |
% argument in the mantissa and the exponent. |
| 3812 |
% \begin{macrocode} |
| 3813 |
\expandafter\nprt@testcharacter\nprt@marg\@empty\@empty |
| 3814 |
% \end{macrocode} |
| 3815 |
% If there are invalid characters in the argument, just print the |
| 3816 |
% argument without formatting it. |
| 3817 |
% Redefine \cs{pm} to avoid an additional error in text mode. |
| 3818 |
% \begin{macrocode} |
| 3819 |
\ifnprt@argumenterror |
| 3820 |
\begingroup\def\pm{+-}#2\endgroup |
| 3821 |
\else |
| 3822 |
% \end{macrocode} |
| 3823 |
% If everything is okay, proceed with parsing. |
| 3824 |
% |
| 3825 |
% \changes{1.31}{2004/08/18}{Bugfix: \cs{numprint\{e123\}} reprinted the |
| 3826 |
% last used sign}% |
| 3827 |
% If the mantissa is empty don't work on it but reset the sign of the |
| 3828 |
% mantissa to avoid to reprint the old sign when using |
| 3829 |
% \cs{numprint\{e123\}}. |
| 3830 |
% If it is not empty, parse it for a sign and a number. |
| 3831 |
% \begin{macrocode} |
| 3832 |
\ifx\nprt@mantissa\@empty |
| 3833 |
\def\nprt@mantissa@sign{\@empty}% |
| 3834 |
\else |
| 3835 |
\nprt@testsign{mantissa}{\nprt@mantissa}% |
| 3836 |
\fi |
| 3837 |
% \end{macrocode} |
| 3838 |
% If the mantissa contains only a sign, \cs{nprt@mantissa} is set to |
| 3839 |
% \cs{@empty} and thus empty even if it wasn't 4 lines above. |
| 3840 |
% If the mantissa only contains of a sign and an exponent is given, |
| 3841 |
% everything is fine. |
| 3842 |
% If no exponent is given, the input format is invalid. |
| 3843 |
% \begin{macrocode} |
| 3844 |
\ifx\nprt@mantissa\@empty |
| 3845 |
\ifx\nprt@exponent\@empty |
| 3846 |
\nprt@error{Invalid number format. Printing the |
| 3847 |
argument\MessageBreak |
| 3848 |
verbatim}{Something is wrong in the format of the number}% |
| 3849 |
\else |
| 3850 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3851 |
\fi |
| 3852 |
\else |
| 3853 |
% \end{macrocode} |
| 3854 |
% Round the mantissa if necessary. |
| 3855 |
% \begin{macrocode} |
| 3856 |
\nprt@round{mantissa}{\nprt@rounddigits}% |
| 3857 |
% \end{macrocode} |
| 3858 |
% Pad the mantissa if necessary. |
| 3859 |
% \begin{macrocode} |
| 3860 |
\nprt@lpad{mantissa}{\nprt@lpaddigits}{\nprt@lpadchar}% |
| 3861 |
\fi |
| 3862 |
% \end{macrocode} |
| 3863 |
% If an exponent has been found, parse this like the mantissa. |
| 3864 |
% \begin{macrocode} |
| 3865 |
\ifnprt@expfound |
| 3866 |
% \end{macrocode} |
| 3867 |
% Test whether an exponent character was given but no exponent. |
| 3868 |
% \begin{macrocode} |
| 3869 |
\ifx\nprt@exponent\@empty |
| 3870 |
\nprt@error{Empty exponent}{If you specify an exponent |
| 3871 |
using one of the characters `\nprt@explist' you |
| 3872 |
have\MessageBreak |
| 3873 |
to give an exponent, too.}% |
| 3874 |
\else |
| 3875 |
\nprt@testsign{exponent}{\nprt@exponent}% |
| 3876 |
\nprt@round{exponent}{\nprt@roundexpdigits}% |
| 3877 |
\fi |
| 3878 |
\fi |
| 3879 |
% \end{macrocode} |
| 3880 |
% If either the mantissa or the exponent produces an error, just print |
| 3881 |
% the argument as is. |
| 3882 |
% Redefine \cs{pm} to avoid an additional error in text mode. |
| 3883 |
% \begin{macrocode} |
| 3884 |
\ifnprt@argumenterror |
| 3885 |
\begingroup\def\pm{+-}#2\endgroup |
| 3886 |
\else |
| 3887 |
% \end{macrocode} |
| 3888 |
% Print the mantissa if present. |
| 3889 |
% \begin{macrocode} |
| 3890 |
\ifx\nprt@mantissa\@empty |
| 3891 |
\else |
| 3892 |
% \end{macrocode} |
| 3893 |
% Print the part before the decimal sign. |
| 3894 |
% |
| 3895 |
% If the number shall be printed in a box (table alignment) some |
| 3896 |
% special things have to be done. |
| 3897 |
% \begin{macrocode} |
| 3898 |
\ifnprt@mantissa@fixeddigits |
| 3899 |
\ifmmode |
| 3900 |
% \end{macrocode} |
| 3901 |
% In math mode, it must be decided which math style is active because |
| 3902 |
% the width of the box depends on that. |
| 3903 |
% The \cs{mathchoice} command does the formatting for all styles and |
| 3904 |
% typesets the active one then. |
| 3905 |
% \begin{macrocode} |
| 3906 |
\mathchoice{% |
| 3907 |
% \end{macrocode} |
| 3908 |
% Calculate the width of the block for the \cs{displaystyle}. |
| 3909 |
% \begin{macrocode} |
| 3910 |
\nprt@calcblockwidth{mantissa}{before}{\displaystyle}% |
| 3911 |
% \end{macrocode} |
| 3912 |
% Generate a box with the calculated width and the corresponding math |
| 3913 |
% style. |
| 3914 |
% \begin{macrocode} |
| 3915 |
\makebox[\the\nprt@blockwidth][r]{$\displaystyle |
| 3916 |
% \end{macrocode} |
| 3917 |
% Print the sign if present. |
| 3918 |
% \begin{macrocode} |
| 3919 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3920 |
% \end{macrocode} |
| 3921 |
% Print the integer part into the box. |
| 3922 |
% \begin{macrocode} |
| 3923 |
\nprt@printbefore{mantissa}$}% |
| 3924 |
}{% |
| 3925 |
% \end{macrocode} |
| 3926 |
% Do the same for \cs{textstyle}. |
| 3927 |
% \begin{macrocode} |
| 3928 |
\nprt@calcblockwidth{mantissa}{before}{\textstyle}% |
| 3929 |
\makebox[\the\nprt@blockwidth][r]{$\textstyle |
| 3930 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3931 |
\nprt@printbefore{mantissa}$}% |
| 3932 |
}{% |
| 3933 |
% \end{macrocode} |
| 3934 |
% Do the same for \cs{scriptstyle}. |
| 3935 |
% \begin{macrocode} |
| 3936 |
\nprt@calcblockwidth{mantissa}{before}{\scriptstyle}% |
| 3937 |
\makebox[\the\nprt@blockwidth][r]{$\scriptstyle |
| 3938 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3939 |
\nprt@printbefore{mantissa}$}% |
| 3940 |
}{% |
| 3941 |
% \end{macrocode} |
| 3942 |
% Do the same for \cs{scriptscriptstyle}. |
| 3943 |
% \begin{macrocode} |
| 3944 |
\nprt@calcblockwidth{mantissa}{before}{\scriptscriptstyle}% |
| 3945 |
\makebox[\the\nprt@blockwidth][r]{$\scriptscriptstyle |
| 3946 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3947 |
\nprt@printbefore{mantissa}$}% |
| 3948 |
}% |
| 3949 |
\else |
| 3950 |
% \end{macrocode} |
| 3951 |
% If the number is printed in text mode, the size is preserved inside |
| 3952 |
% the box. |
| 3953 |
% Thus, no hack as for math mode is necessary. |
| 3954 |
% \begin{macrocode} |
| 3955 |
\nprt@calcblockwidth{mantissa}{before}{\@empty}% |
| 3956 |
\makebox[\the\nprt@blockwidth][r]{% |
| 3957 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3958 |
\nprt@printbefore{mantissa}% |
| 3959 |
}% |
| 3960 |
\fi |
| 3961 |
\else |
| 3962 |
% \end{macrocode} |
| 3963 |
% If the number is printed without fixed width, just print it. |
| 3964 |
% \begin{macrocode} |
| 3965 |
\nprt@printsign{mantissa}{\nprt@mantissa@sign}% |
| 3966 |
\nprt@printbefore{mantissa}% |
| 3967 |
\fi |
| 3968 |
% \end{macrocode} |
| 3969 |
% Print the after-decimal-sign digits. |
| 3970 |
% This works exactly as the integer part. |
| 3971 |
% \begin{macrocode} |
| 3972 |
\ifnprt@mantissa@fixeddigits |
| 3973 |
\ifmmode |
| 3974 |
\mathchoice{% |
| 3975 |
\nprt@calcblockwidth{mantissa}{after}{\displaystyle}% |
| 3976 |
\makebox[\the\nprt@blockwidth][l]{$\displaystyle |
| 3977 |
\ifnprt@mantissa@decimalfound |
| 3978 |
\nprt@decimal |
| 3979 |
\fi |
| 3980 |
\nprt@printafter{mantissa}$}% |
| 3981 |
}{% |
| 3982 |
\nprt@calcblockwidth{mantissa}{after}{\textstyle}% |
| 3983 |
\makebox[\the\nprt@blockwidth][l]{$\textstyle |
| 3984 |
\ifnprt@mantissa@decimalfound |
| 3985 |
\nprt@decimal |
| 3986 |
\fi |
| 3987 |
\nprt@printafter{mantissa}$}% |
| 3988 |
}{% |
| 3989 |
\nprt@calcblockwidth{mantissa}{after}{\scriptstyle}% |
| 3990 |
\makebox[\the\nprt@blockwidth][l]{$\scriptstyle |
| 3991 |
\ifnprt@mantissa@decimalfound |
| 3992 |
\nprt@decimal |
| 3993 |
\fi |
| 3994 |
\nprt@printafter{mantissa}$}% |
| 3995 |
}{% |
| 3996 |
\nprt@calcblockwidth{mantissa}{after}{\scriptscriptstyle}% |
| 3997 |
\makebox[\the\nprt@blockwidth][l]{$\scriptscriptstyle |
| 3998 |
\ifnprt@mantissa@decimalfound |
| 3999 |
\nprt@decimal |
| 4000 |
\fi |
| 4001 |
\nprt@printafter{mantissa}$}% |
| 4002 |
}% |
| 4003 |
\else |
| 4004 |
\nprt@calcblockwidth{mantissa}{after}{\@empty}% |
| 4005 |
\makebox[\the\nprt@blockwidth][l]{% |
| 4006 |
\ifnprt@mantissa@decimalfound |
| 4007 |
\nprt@decimal |
| 4008 |
\fi |
| 4009 |
\nprt@printafter{mantissa}% |
| 4010 |
}% |
| 4011 |
\fi |
| 4012 |
\else |
| 4013 |
\ifnprt@mantissa@decimalfound |
| 4014 |
\nprt@decimal |
| 4015 |
\fi |
| 4016 |
\nprt@printafter{mantissa}% |
| 4017 |
\fi |
| 4018 |
\fi |
| 4019 |
% \end{macrocode} |
| 4020 |
% If an exponent is defined it has to be printed later. |
| 4021 |
% Therefore, define the command \cs{nprt@printexp} that just prints |
| 4022 |
% its argument. |
| 4023 |
% \begin{macrocode} |
| 4024 |
\ifnprt@expfound |
| 4025 |
\def\nprt@printexp##1{##1}% |
| 4026 |
% \end{macrocode} |
| 4027 |
% If a sign but no number has been given for the exponent |
| 4028 |
% \cs{nprt@exponent} is empty but \cs{ifnprt@expfound} true. |
| 4029 |
% Test for this case here. |
| 4030 |
% \begin{macrocode} |
| 4031 |
\ifx\nprt@exponent\@empty |
| 4032 |
\nprt@error{Invalid number format in |
| 4033 |
exponent. Printing\MessageBreak |
| 4034 |
garbage}{Something is wrong in the format of the exponent}% |
| 4035 |
\fi |
| 4036 |
\else |
| 4037 |
% \end{macrocode} |
| 4038 |
% If there is no exponent but digits reserved for it, define the |
| 4039 |
% \cs{nprt@printexp} so that is just needs that space but does not |
| 4040 |
% print anything. |
| 4041 |
% \begin{macrocode} |
| 4042 |
\ifnprt@exponent@fixeddigits |
| 4043 |
\def\nprt@printexp##1{\hphantom{##1}}% |
| 4044 |
\else |
| 4045 |
% \end{macrocode} |
| 4046 |
% If there is no exponent and no reserved digits, don't print the |
| 4047 |
% exponent. |
| 4048 |
% \begin{macrocode} |
| 4049 |
\def\nprt@printexp##1{}% |
| 4050 |
\fi |
| 4051 |
\fi |
| 4052 |
% \end{macrocode} |
| 4053 |
% If\label{page:code:color} negative numbers are printed in red (as |
| 4054 |
% shown in section~\ref{sec:negative-red}), a positive mantissa with a |
| 4055 |
% negative exponent would normally lead to a black mantissa with a |
| 4056 |
% red exponent. |
| 4057 |
% To avoid that the \cs{color} command is redefined to do nothing |
| 4058 |
% here. |
| 4059 |
% Do it in a group to restrain this to the exponent itself. |
| 4060 |
% \changes{1.22}{2004/08/08}{Restrain empty \cs{color} command to |
| 4061 |
% exponent}% |
| 4062 |
% \begin{macrocode} |
| 4063 |
\begingroup |
| 4064 |
\def\color##1{}% |
| 4065 |
% \end{macrocode} |
| 4066 |
% Call the command that either print the exponent, reserves space as |
| 4067 |
% it were printed or does nothing. |
| 4068 |
% \begin{macrocode} |
| 4069 |
\nprt@printexp{% |
| 4070 |
% \end{macrocode} |
| 4071 |
% If not mantissa is specified, print the short version, e.g., |
| 4072 |
% $10^{123}$ and thus leave out the product sign. |
| 4073 |
% \begin{macrocode} |
| 4074 |
\ifx\nprt@mantissa\@empty |
| 4075 |
\else |
| 4076 |
% \end{macrocode} |
| 4077 |
% Print out the product sign, if there is a mantissa. |
| 4078 |
% \begin{macrocode} |
| 4079 |
\nprt@prod |
| 4080 |
\fi |
| 4081 |
% \end{macrocode} |
| 4082 |
% Print ``10'' and the exponent. |
| 4083 |
% This is different between text and math mode. |
| 4084 |
% \begin{macrocode} |
| 4085 |
\ifmmode 10^\else 10\expandafter\textsuperscript\fi{% |
| 4086 |
% \end{macrocode} |
| 4087 |
% Print the number before the decimal sign. |
| 4088 |
% As the mantissa. |
| 4089 |
% \begin{macrocode} |
| 4090 |
\ifnprt@exponent@fixeddigits |
| 4091 |
\ifmmode |
| 4092 |
\mathchoice{% |
| 4093 |
\nprt@calcblockwidth{exponent}{before}{\displaystyle}% |
| 4094 |
\makebox[\the\nprt@blockwidth][r]{$\displaystyle |
| 4095 |
\nprt@printsign{exponent}{\nprt@exponent@sign}% |
| 4096 |
\nprt@printbefore{exponent}$}% |
| 4097 |
}{% |
| 4098 |
\nprt@calcblockwidth{exponent}{before}{\textstyle}% |
| 4099 |
\makebox[\the\nprt@blockwidth][r]{$\textstyle |
| 4100 |
\nprt@printsign{exponent}{\nprt@exponent@sign}% |
| 4101 |
\nprt@printbefore{exponent}$}% |
| 4102 |
}{% |
| 4103 |
\nprt@calcblockwidth{exponent}{before}{\scriptstyle}% |
| 4104 |
\makebox[\the\nprt@blockwidth][r]{$\scriptstyle |
| 4105 |
\nprt@printsign{exponent}{\nprt@exponent@sign}% |
| 4106 |
\nprt@printbefore{exponent}$}% |
| 4107 |
}{% |
| 4108 |
\nprt@calcblockwidth{exponent}{before}{\scriptscriptstyle}% |
| 4109 |
\makebox[\the\nprt@blockwidth][r]{$\scriptscriptstyle |
| 4110 |
\nprt@printsign{exponent}{\nprt@exponent@sign}% |
| 4111 |
\nprt@printbefore{exponent}$}% |
| 4112 |
}% |
| 4113 |
\else |
| 4114 |
\nprt@calcblockwidth{exponent}{before}{\@empty}% |
| 4115 |
\makebox[\the\nprt@blockwidth][r]{% |
| 4116 |
\nprt@printsign{exponent}{\nprt@exponent@sign}% |
| 4117 |
\nprt@printbefore{exponent}% |
| 4118 |
}% |
| 4119 |
\fi |
| 4120 |
\else |
| 4121 |
\nprt@printsign{exponent}{\nprt@exponent@sign}% |
| 4122 |
\nprt@printbefore{exponent}% |
| 4123 |
\fi |
| 4124 |
% \end{macrocode} |
| 4125 |
% Produce a warning since this is uncommon in exponents. |
| 4126 |
% \begin{macrocode} |
| 4127 |
\ifnprt@exponent@decimalfound |
| 4128 |
\PackageWarning{numprint}{Non-integer exponent}% |
| 4129 |
\fi |
| 4130 |
% \end{macrocode} |
| 4131 |
% Print the part after the decimal sign. |
| 4132 |
% \begin{macrocode} |
| 4133 |
\ifnprt@exponent@fixeddigits |
| 4134 |
\ifmmode |
| 4135 |
\mathchoice{% |
| 4136 |
\nprt@calcblockwidth{exponent}{after}{\displaystyle}% |
| 4137 |
\makebox[\the\nprt@blockwidth][l]{$\displaystyle |
| 4138 |
\ifnprt@exponent@decimalfound |
| 4139 |
\nprt@decimal |
| 4140 |
\fi |
| 4141 |
\nprt@printafter{exponent}$}% |
| 4142 |
}{% |
| 4143 |
\nprt@calcblockwidth{exponent}{after}{\textstyle}% |
| 4144 |
\makebox[\the\nprt@blockwidth][l]{$\textstyle |
| 4145 |
\ifnprt@exponent@decimalfound |
| 4146 |
\nprt@decimal |
| 4147 |
\fi |
| 4148 |
\nprt@printafter{exponent}$}% |
| 4149 |
}{% |
| 4150 |
\nprt@calcblockwidth{exponent}{after}{\scriptstyle}% |
| 4151 |
\makebox[\the\nprt@blockwidth][l]{$\scriptstyle |
| 4152 |
\ifnprt@exponent@decimalfound |
| 4153 |
\nprt@decimal |
| 4154 |
\fi |
| 4155 |
\nprt@printafter{exponent}$}% |
| 4156 |
}{% |
| 4157 |
\nprt@calcblockwidth{exponent}{after}{\scriptscriptstyle}% |
| 4158 |
\makebox[\the\nprt@blockwidth][l]{$\scriptscriptstyle |
| 4159 |
\ifnprt@exponent@decimalfound |
| 4160 |
\nprt@decimal |
| 4161 |
\fi |
| 4162 |
\nprt@printafter{exponent}$}% |
| 4163 |
}% |
| 4164 |
\else |
| 4165 |
\nprt@calcblockwidth{exponent}{after}{\@empty}% |
| 4166 |
\makebox[\the\nprt@blockwidth][l]{% |
| 4167 |
\ifnprt@exponent@decimalfound |
| 4168 |
\nprt@decimal |
| 4169 |
\fi |
| 4170 |
\nprt@printafter{exponent}% |
| 4171 |
}% |
| 4172 |
\fi |
| 4173 |
\else |
| 4174 |
\ifnprt@exponent@decimalfound |
| 4175 |
\nprt@decimal |
| 4176 |
\fi |
| 4177 |
\nprt@printafter{exponent}% |
| 4178 |
\fi |
| 4179 |
}% 10^ |
| 4180 |
}% \nprt@printexp |
| 4181 |
\endgroup |
| 4182 |
\fi |
| 4183 |
\fi |
| 4184 |
% \end{macrocode} |
| 4185 |
% If the unit is not empty, print it, too. |
| 4186 |
% \begin{macrocode} |
| 4187 |
\ifx\nprt@oarg\nprt@@empty |
| 4188 |
\else |
| 4189 |
% \end{macrocode} |
| 4190 |
% All units expect the degree symbol are separated from the number. |
| 4191 |
% Detect whether the degree symbol is used. |
| 4192 |
% |
| 4193 |
% \changes{1.22}{2004/08/08}{Produce a warning rather than an error |
| 4194 |
% when using \cs{textdegree} as unit}% |
| 4195 |
% The \cs{textdegree} command is not useable in math mode. |
| 4196 |
% Redeclare it to generate a warning and to use \cs{tcdegree} |
| 4197 |
% instead. |
| 4198 |
% \begin{macrocode} |
| 4199 |
\def\textdegree{% |
| 4200 |
\PackageWarning{numprint}{The unit is typeset in mathmode. Use |
| 4201 |
\string\tcdegree\space of\MessageBreak |
| 4202 |
the mathcomp package or \string\degree\space of the |
| 4203 |
gensymb\MessageBreak |
| 4204 |
package}% |
| 4205 |
% \end{macrocode} |
| 4206 |
% Call \cs{tcdegree} via \cs{csname} in order to avoid a second error |
| 4207 |
% message if \cs{tcdegree} is not present (because of not loading |
| 4208 |
% |mathcomp.sty|. |
| 4209 |
% \begin{macrocode} |
| 4210 |
\csname tcdegree\endcsname |
| 4211 |
}% |
| 4212 |
% \end{macrocode} |
| 4213 |
% \changes{1.22}{2004/08/08}{Enable to use \cs{textcelsius}, |
| 4214 |
% \cs{textohm}, \cs{textmu}, and \cs{textperthousand} in the unit}% |
| 4215 |
% \changes{1.32}{2004/09/13}{Produce an error rather than a warning |
| 4216 |
% when using \texttt{textcomp} symbols in the unit if |
| 4217 |
% \texttt{mathcomp} or \texttt{gensymb} is not loaded}% |
| 4218 |
% Handle \cs{textcelsius}, \cs{textohm}, \cs{textmu}, and |
| 4219 |
% \cs{textperthousand} in the same way as \cs{textdegree}. |
| 4220 |
% \begin{macrocode} |
| 4221 |
\def\nprt@PackageError##1##2{\PackageWarning{numprint}{##1}}% |
| 4222 |
\def\textcelsius{% |
| 4223 |
\begingroup |
| 4224 |
\@ifundefined{tccelsius}{\@ifundefined{celsius}{% |
| 4225 |
\def\nprt@PackageError####1####2{% |
| 4226 |
\PackageError{numprint}{####1}{####2}}% |
| 4227 |
}{\celsius}}{\tccelsius}% |
| 4228 |
\nprt@PackageError{The unit is typeset in |
| 4229 |
mathmode. Use \string\tccelsius\space of\MessageBreak |
| 4230 |
the mathcomp package or \string\celsius\space of the |
| 4231 |
gensymb\MessageBreak |
| 4232 |
package}{If you load the mathcomp package |
| 4233 |
\string\textcelsius\space is substituted by |
| 4234 |
\string\tccelsius. If you load the gensymb package |
| 4235 |
\string\textcelsius\space is substituted by \string\celsius.}% |
| 4236 |
\endgroup |
| 4237 |
}% |
| 4238 |
\def\textohm{% |
| 4239 |
\begingroup |
| 4240 |
\@ifundefined{tcohm}{\@ifundefined{ohm}{% |
| 4241 |
\def\nprt@PackageError####1####2{% |
| 4242 |
\PackageError{numprint}{####1}{####2}}% |
| 4243 |
}{\ohm}}{\tcohm}% |
| 4244 |
\nprt@PackageError{The unit is typeset in |
| 4245 |
mathmode. Use \string\tcohm\space of\MessageBreak |
| 4246 |
the mathcomp package or \string\ohm\space of the |
| 4247 |
gensymb\MessageBreak |
| 4248 |
package}{If you load the mathcomp package |
| 4249 |
\string\textohm\space is substituted by |
| 4250 |
\string\tcohm. If you load the gensymb package |
| 4251 |
\string\textohm\space is substituted by \string\ohm.}% |
| 4252 |
\endgroup |
| 4253 |
}% |
| 4254 |
\def\textmu{% |
| 4255 |
\begingroup |
| 4256 |
\@ifundefined{tcmu}{% |
| 4257 |
\def\nprt@PackageError####1####2{% |
| 4258 |
\PackageError{numprint}{####1}{####2}}% |
| 4259 |
}{\tcmu}% |
| 4260 |
\nprt@PackageError{The unit is typeset in |
| 4261 |
mathmode. Use \string\tcmu\space of\MessageBreak |
| 4262 |
the mathcomp package}{If you load the mathcomp package |
| 4263 |
\string\textmu\space is substituted by \string\tcmu.}% |
| 4264 |
\endgroup |
| 4265 |
}% |
| 4266 |
\def\textperthousand{% |
| 4267 |
\begingroup |
| 4268 |
\@ifundefined{tcperthousand}{\@ifundefined{perthousand}{% |
| 4269 |
\def\nprt@PackageError####1####2{% |
| 4270 |
\PackageError{numprint}{####1}{####2}}% |
| 4271 |
}{\perthousand}}{\tcperthousand}% |
| 4272 |
\nprt@PackageError{The unit is typeset in |
| 4273 |
mathmode. Use \string\tcperthousand\MessageBreak |
| 4274 |
of the mathcomp package or \string\perthousand\space of |
| 4275 |
the\MessageBreak |
| 4276 |
gensymb package}{If you load the mathcomp package |
| 4277 |
\string\textperthousand\space is substituted by |
| 4278 |
\string\tcperthousand. If you load the gensymb package |
| 4279 |
\string\textperthousand\space is substituted by |
| 4280 |
\string\perthousand.}% |
| 4281 |
\endgroup |
| 4282 |
}% |
| 4283 |
% \end{macrocode} |
| 4284 |
% If the unit is \cs{tcdegree} from the \texttt{mathcomp} package, the |
| 4285 |
% unit is a degree sign. |
| 4286 |
% Then print the separator \cs{nprt@degreesep} instead of |
| 4287 |
% \cs{nprt@unitsep}. |
| 4288 |
% \begin{macrocode} |
| 4289 |
\def\nprt@tmpunit{\tcdegree}% |
| 4290 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4291 |
\ensuremath{\nprt@degreesep}% |
| 4292 |
\else |
| 4293 |
% \end{macrocode} |
| 4294 |
% If the unit is \cs{degree} from the \texttt{gensymb} package, the |
| 4295 |
% unit is a degree sign. |
| 4296 |
% Then print the separator \cs{nprt@degreesep} instead of |
| 4297 |
% \cs{nprt@unitsep}. |
| 4298 |
% \begin{macrocode} |
| 4299 |
\def\nprt@tmpunit{\degree}% |
| 4300 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4301 |
\ensuremath{\nprt@degreesep}% |
| 4302 |
\else |
| 4303 |
% \end{macrocode} |
| 4304 |
% If the unit is \cs{textdegree} from the \texttt{textcomp} package, the |
| 4305 |
% unit is a degree sign. |
| 4306 |
% Then print the separator \cs{nprt@degreesep} instead of |
| 4307 |
% \cs{nprt@unitsep}. |
| 4308 |
% \begin{macrocode} |
| 4309 |
\def\nprt@tmpunit{\textdegree}% |
| 4310 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4311 |
\ensuremath{\nprt@degreesep}% |
| 4312 |
\else |
| 4313 |
% \end{macrocode} |
| 4314 |
% If the unit is \cs{tccelsius} from the \texttt{mathcomp} package, the |
| 4315 |
% unit is degree centigrade. |
| 4316 |
% Then print the separator \cs{nprt@celsiussep} instead of |
| 4317 |
% \cs{nprt@unitsep}. |
| 4318 |
% \begin{macrocode} |
| 4319 |
\def\nprt@tmpunit{\tccelsius}% |
| 4320 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4321 |
\ensuremath{\nprt@celsiussep}% |
| 4322 |
\else |
| 4323 |
% \end{macrocode} |
| 4324 |
% If the unit is \cs{celsius} from the \texttt{gensymb} package, the |
| 4325 |
% unit is degree centigrade. |
| 4326 |
% Then print the separator \cs{nprt@celsiussep} instead of |
| 4327 |
% \cs{nprt@unitsep}. |
| 4328 |
% \begin{macrocode} |
| 4329 |
\def\nprt@tmpunit{\celsius}% |
| 4330 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4331 |
\ensuremath{\nprt@celsiussep}% |
| 4332 |
\else |
| 4333 |
% \end{macrocode} |
| 4334 |
% If the unit is \cs{textcelsius} from the \texttt{textcomp} package, the |
| 4335 |
% unit is degree centigrade. |
| 4336 |
% Then print the separator \cs{nprt@celsiussep} instead of |
| 4337 |
% \cs{nprt@unitsep}. |
| 4338 |
% \begin{macrocode} |
| 4339 |
\def\nprt@tmpunit{\textcelsius}% |
| 4340 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4341 |
\ensuremath{\nprt@celsiussep}% |
| 4342 |
\else |
| 4343 |
% \end{macrocode} |
| 4344 |
% If the unit is \cs{\%}, the unit is a percent sign. |
| 4345 |
% Then print the separator \cs{nprt@percentsep} instead of |
| 4346 |
% \cs{nprt@unitsep}. |
| 4347 |
% \begin{macrocode} |
| 4348 |
\def\nprt@tmpunit{\%}% |
| 4349 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4350 |
\ensuremath{\nprt@percentsep}% |
| 4351 |
\else |
| 4352 |
% \end{macrocode} |
| 4353 |
% If the unit is \cs{tcperthousand} from the \texttt{mathcomp} package, the |
| 4354 |
% unit is a permil sign. |
| 4355 |
% Then print the separator \cs{nprt@percentsep} instead of |
| 4356 |
% \cs{nprt@unitsep}. |
| 4357 |
% \begin{macrocode} |
| 4358 |
\def\nprt@tmpunit{\tcperthousand}% |
| 4359 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4360 |
\ensuremath{\nprt@percentsep}% |
| 4361 |
\else |
| 4362 |
% \end{macrocode} |
| 4363 |
% If the unit is \cs{perthousand} from the \texttt{gensymb} package, the |
| 4364 |
% unit is a permil sign. |
| 4365 |
% Then print the separator \cs{nprt@percentsep} instead of |
| 4366 |
% \cs{nprt@unitsep}. |
| 4367 |
% \begin{macrocode} |
| 4368 |
\def\nprt@tmpunit{\perthousand}% |
| 4369 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4370 |
\ensuremath{\nprt@percentsep}% |
| 4371 |
\else |
| 4372 |
% \end{macrocode} |
| 4373 |
% If the unit is \cs{textperthousand} from the \texttt{textcomp} package, the |
| 4374 |
% unit is a permil sign. |
| 4375 |
% Then print the separator \cs{nprt@percentsep} instead of |
| 4376 |
% \cs{nprt@unitsep}. |
| 4377 |
% \begin{macrocode} |
| 4378 |
\def\nprt@tmpunit{\textperthousand}% |
| 4379 |
\ifx\nprt@oarg\nprt@tmpunit |
| 4380 |
\ensuremath{\nprt@percentsep}% |
| 4381 |
\else |
| 4382 |
% \end{macrocode} |
| 4383 |
% Else, print \cs{nprt@unitsep}. |
| 4384 |
% \begin{macrocode} |
| 4385 |
\ensuremath{\nprt@unitsep}% |
| 4386 |
\fi |
| 4387 |
\fi |
| 4388 |
\fi |
| 4389 |
\fi |
| 4390 |
\fi |
| 4391 |
\fi |
| 4392 |
\fi |
| 4393 |
\fi |
| 4394 |
\fi |
| 4395 |
\fi |
| 4396 |
% \end{macrocode} |
| 4397 |
% Finally, print the unit. |
| 4398 |
% \begin{macrocode} |
| 4399 |
\npunitcommand{\nprt@oarg}% |
| 4400 |
\fi |
| 4401 |
\endgroup |
| 4402 |
} |
| 4403 |
% \end{macrocode} |
| 4404 |
% \end{macro} |
| 4405 |
% |
| 4406 |
% |
| 4407 |
% \subsection{Print lengths and counters}% |
| 4408 |
% \label{sec:code:lenprint}% |
| 4409 |
% |
| 4410 |
% \begin{macro}{\cntprint} |
| 4411 |
% The macro for printing counters. |
| 4412 |
% The mandatory argument takes a \LaTeX\ counter. |
| 4413 |
% The optional argument may contain a unit which is printed, too. |
| 4414 |
% \begin{macrocode} |
| 4415 |
\newcounter{nprt@cntprint} |
| 4416 |
\DeclareRobustCommand*\cntprint[2][\@empty]{% |
| 4417 |
\@ifundefined{c@#2}{\@nocounterr{#2}}{% |
| 4418 |
\numprint[#1]{\arabic{#2}}% |
| 4419 |
}% |
| 4420 |
} |
| 4421 |
% \end{macrocode} |
| 4422 |
% \end{macro} |
| 4423 |
% \begin{macro}{\lenprint} |
| 4424 |
% The macro for printing lengths. |
| 4425 |
% The mandatory argument takes a \TeX\ dimension or a counter. |
| 4426 |
% The optional argument may contain a unit that is used to convert the |
| 4427 |
% unit from |pt| to the given value and which then is printed, too. |
| 4428 |
% \begin{macrocode} |
| 4429 |
\DeclareRobustCommand*\lenprint[2][\@empty]{% |
| 4430 |
% \end{macrocode} |
| 4431 |
% Do everything in a group to avoid macros to resist outside. |
| 4432 |
% \begin{macrocode} |
| 4433 |
\begingroup |
| 4434 |
% \end{macrocode} |
| 4435 |
% Save the optional argument in \cs{nprt@oarg} and expand it. |
| 4436 |
% \begin{macrocode} |
| 4437 |
\edef\nprt@oarg{#1}% |
| 4438 |
% \end{macrocode} |
| 4439 |
% If no optional argument has been given, change it to |pt|. |
| 4440 |
% This cannot be done as default argument in the |
| 4441 |
% \cs{DeclareRobustCommand*} definition since printing of counters |
| 4442 |
% does not have |pt| as default. |
| 4443 |
% \begin{macrocode} |
| 4444 |
\edef\nprt@tmp{\@empty}% |
| 4445 |
\ifx\nprt@oarg\nprt@tmp |
| 4446 |
\def\nprt@oarg{pt}% |
| 4447 |
\fi |
| 4448 |
% \end{macrocode} |
| 4449 |
% If the chosen unit is not defined produce an error message and fall |
| 4450 |
% back to |pt|. |
| 4451 |
% \begin{macrocode} |
| 4452 |
\@ifundefined{nprt@factor@\nprt@oarg}{% |
| 4453 |
\PackageError{numprint}{Invalid unit `#1'}{% |
| 4454 |
The requested unit is not defined using \string\npdefunit.^^J% |
| 4455 |
Using `pt' instead.}% |
| 4456 |
\def\nprt@oarg{pt}% |
| 4457 |
}{}% |
| 4458 |
% \end{macrocode} |
| 4459 |
% For later printing, a length is used that is fixed to |pt| as |
| 4460 |
% length. |
| 4461 |
% If another unit has been chosen a fake length has to be calculated |
| 4462 |
% that is as many |pt| long as the original length is in the given |
| 4463 |
% unit. |
| 4464 |
% Thus, multiply the mandatory argument by the specific factor for the |
| 4465 |
% given unit. |
| 4466 |
% \begin{macrocode} |
| 4467 |
\setlength{\@tempdima}{#2}% |
| 4468 |
\setlength{\@tempdima}{\csname nprt@factor@\nprt@oarg\endcsname\@tempdima}% |
| 4469 |
% \end{macrocode} |
| 4470 |
% If the unit name for the given unit is not defined but the factor |
| 4471 |
% is an internal error has occured. |
| 4472 |
% Produce an error message. |
| 4473 |
% \begin{macrocode} |
| 4474 |
\@ifundefined{nprt@unit@\nprt@oarg}{% |
| 4475 |
\PackageError{numprint}{Unknown unit name `\nprt@oarg'}{% |
| 4476 |
Send a bug report to [email protected] with a short |
| 4477 |
example showing this bug.}% |
| 4478 |
}{% |
| 4479 |
% \end{macrocode} |
| 4480 |
% Store the unit name in \cs{nprt@oarg}. |
| 4481 |
% \begin{macrocode} |
| 4482 |
\edef\nprt@oarg{\csname nprt@unit@\nprt@oarg\endcsname}% |
| 4483 |
}% |
| 4484 |
% \end{macrocode} |
| 4485 |
% Finally, call \cs{numprint}. |
| 4486 |
% The two \cs{expandafter} are necessary since \cs{numprint} also uses |
| 4487 |
% \cs{nprt@oarg} and produces an infinite loop otherwise. |
| 4488 |
% \begin{macrocode} |
| 4489 |
\expandafter\numprint\expandafter[\nprt@oarg]{\strip@pt\@tempdima}% |
| 4490 |
\endgroup |
| 4491 |
} |
| 4492 |
% \end{macrocode} |
| 4493 |
% \end{macro} |
| 4494 |
% \begin{macro}{\npdefunit} |
| 4495 |
% Define a new unit for usage with \cs{lenprint}. |
| 4496 |
% First argument: name in the sourcecode. |
| 4497 |
% Second argument: printed unit. |
| 4498 |
% Third argument: factor from |pt| to the new unit or |*| to preserve |
| 4499 |
% old factor. |
| 4500 |
% \begin{macrocode} |
| 4501 |
\newcommand*\npdefunit[3]{% |
| 4502 |
% \end{macrocode} |
| 4503 |
% If the third argument is not |*| define the factor for this unit in |
| 4504 |
% \cs{nprt@factor@\meta{\#1}}. |
| 4505 |
% \begin{macrocode} |
| 4506 |
\if#3* |
| 4507 |
\else |
| 4508 |
\expandafter\def\csname nprt@factor@#1\endcsname{#3}% |
| 4509 |
\fi |
| 4510 |
% \end{macrocode} |
| 4511 |
% Define the unit name for this unit in \cs{nprt@unit@\meta{\#1}}. |
| 4512 |
% \begin{macrocode} |
| 4513 |
\expandafter\def\csname nprt@unit@#1\endcsname{#2}% |
| 4514 |
} |
| 4515 |
% \end{macrocode} |
| 4516 |
% \end{macro} |
| 4517 |
% Declare the standard units. |
| 4518 |
% \cs{!} is used to delete the unit separator again. |
| 4519 |
% This is a hack and does not work in all cases correctly. |
| 4520 |
% \begin{macrocode} |
| 4521 |
\npdefunit{pt}{pt}{1.00000000000} |
| 4522 |
\npdefunit{bp}{bp}{0.99626400996} |
| 4523 |
\npdefunit{in}{in}{0.01383700013} |
| 4524 |
\npdefunit{ft}{ft}{0.00115308334} |
| 4525 |
\npdefunit{mm}{mm}{0.35145980351} |
| 4526 |
\npdefunit{cm}{cm}{0.03514598035} |
| 4527 |
\npdefunit{m}{m}{0.0003514598035} |
| 4528 |
\npdefunit{km}{km}{0.0000003514598035} |
| 4529 |
% \end{macrocode} |
| 4530 |
% |
| 4531 |
% |
| 4532 |
% \subsection{Internationalization} |
| 4533 |
% |
| 4534 |
% \begin{macro}{\nprt@ifundefined} |
| 4535 |
% The normal \cs{@ifundefined} command defines the tested macro as |
| 4536 |
% side effect. |
| 4537 |
% This command is better. |
| 4538 |
% Sometimes it will hopefully be unnecessary and supported by the |
| 4539 |
% standard (with a different name, of course). |
| 4540 |
% \begin{macrocode} |
| 4541 |
\newcommand*\nprt@ifundefined[1]{% |
| 4542 |
\begingroup\expandafter\expandafter\expandafter\endgroup |
| 4543 |
\expandafter\ifx\csname #1\endcsname\relax |
| 4544 |
\expandafter\@firstoftwo |
| 4545 |
\else |
| 4546 |
\expandafter\@secondoftwo |
| 4547 |
\fi |
| 4548 |
} |
| 4549 |
% \end{macrocode} |
| 4550 |
% \end{macro} |
| 4551 |
% \begin{macro}{\nprt@addto} |
| 4552 |
% Adds the code of the second argument to the macro defined in the |
| 4553 |
% first argument. |
| 4554 |
% This argument has to be specified without the preceeding backslash. |
| 4555 |
% The code is added only if the command is defined, already. |
| 4556 |
% \begin{macrocode} |
| 4557 |
\newcommand\nprt@addto[2]{% |
| 4558 |
\expandafter\nprt@ifundefined{#1}{}{% |
| 4559 |
\expandafter\addto\expandafter{\csname #1\endcsname}{#2}% |
| 4560 |
}% |
| 4561 |
} |
| 4562 |
% \end{macrocode} |
| 4563 |
% \end{macro} |
| 4564 |
% \begin{macro}{\npaddtolanguage} |
| 4565 |
% Define \cs{npaddtolanguage\marg{Language}\marg{Language |
| 4566 |
% definitions}}. |
| 4567 |
% Adds the \meta{Language definitions} specified in argument two to |
| 4568 |
% the \meta{Language} of argument one. |
| 4569 |
% The language definitions have to be provided in a command with the |
| 4570 |
% name \cs{npstyle}\meta{Language definitions}. |
| 4571 |
% The switching-on command is added to \cs{extras\meta{Language}} |
| 4572 |
% while the switching-off command \cs{npstyledefault} is added to |
| 4573 |
% \cs{noextras\meta{Language}}. |
| 4574 |
% |
| 4575 |
% For example, \cs{npaddtolanguage\{UKenglish\}\{english\}} adds the |
| 4576 |
% command \cs{npstyleenglish} to \cs{extrasUKenglish} and |
| 4577 |
% \cs{npstyledefault} to \cs{noextrasUKenglish}. |
| 4578 |
% |
| 4579 |
% The \cs{npstyle\meta{Language definitions}} commands are described |
| 4580 |
% below. |
| 4581 |
% \begin{macrocode} |
| 4582 |
\newcommand\npaddtolanguage[2]{% |
| 4583 |
\nprt@addto{extras#1}{\csname npstyle#2\endcsname}% |
| 4584 |
\nprt@addto{noextras#1}{\npstyledefault}% |
| 4585 |
} |
| 4586 |
% \end{macrocode} |
| 4587 |
% \end{macro} |
| 4588 |
% \begin{macro}{\npstyledefault} |
| 4589 |
% Set the default values for the separators. |
| 4590 |
% They are set to the German language because of compatibility with |
| 4591 |
% older versions. |
| 4592 |
% \begin{macrocode} |
| 4593 |
\newcommand*\npstyledefault{% |
| 4594 |
\npthousandsep{\,}% |
| 4595 |
\npdecimalsign{,}% |
| 4596 |
\npproductsign{\cdot}% |
| 4597 |
\npunitseparator{\,}% |
| 4598 |
\npdegreeseparator{}% |
| 4599 |
\npcelsiusseparator{\nprt@unitsep}% |
| 4600 |
\nppercentseparator{\nprt@unitsep}% |
| 4601 |
} |
| 4602 |
% \end{macrocode} |
| 4603 |
% \end{macro} |
| 4604 |
% Set the default settings (that are actually the same as German). |
| 4605 |
% \begin{macrocode} |
| 4606 |
\npstyledefault |
| 4607 |
% \end{macrocode} |
| 4608 |
% \begin{macro}{\npstylegerman} |
| 4609 |
% Sets the parameters to German habit. |
| 4610 |
% \begin{macrocode} |
| 4611 |
\newcommand*\npstylegerman{% |
| 4612 |
\npthousandsep{\,}% |
| 4613 |
\npdecimalsign{,}% |
| 4614 |
\npproductsign{\cdot}% |
| 4615 |
\npunitseparator{\,}% |
| 4616 |
\npdegreeseparator{}% |
| 4617 |
\npcelsiusseparator{\nprt@unitsep}% |
| 4618 |
\nppercentseparator{\nprt@unitsep}% |
| 4619 |
} |
| 4620 |
% \end{macrocode} |
| 4621 |
% \end{macro} |
| 4622 |
% \begin{macro}{\npstyleenglish} |
| 4623 |
% Sets the parameters to English habit. |
| 4624 |
% \begin{macrocode} |
| 4625 |
\newcommand*\npstyleenglish{% |
| 4626 |
\npthousandsep{,}% |
| 4627 |
\npdecimalsign{.}% |
| 4628 |
\npproductsign{\times}% |
| 4629 |
\npunitseparator{\,}% |
| 4630 |
\npdegreeseparator{}% |
| 4631 |
\npcelsiusseparator{\nprt@unitsep}% |
| 4632 |
\nppercentseparator{\nprt@unitsep}% |
| 4633 |
} |
| 4634 |
% \end{macrocode} |
| 4635 |
% \end{macro} |
| 4636 |
% \begin{macro}{\npstyleportuguese} |
| 4637 |
% \changes{1.37}{2007/01/08}{Change thousand separator for Portuguese |
| 4638 |
% from ``\cs{,}'' to ``\texttt{.}''}% |
| 4639 |
% Sets the parameters to Portuguese habit. |
| 4640 |
% \begin{macrocode} |
| 4641 |
\newcommand*\npstyleportuguese{% |
| 4642 |
\npthousandsep{.}% |
| 4643 |
\npdecimalsign{,}% |
| 4644 |
\npproductsign{\cdot}% |
| 4645 |
\npunitseparator{\,}% |
| 4646 |
\npdegreeseparator{}% |
| 4647 |
\npcelsiusseparator{\nprt@unitsep}% |
| 4648 |
\nppercentseparator{\nprt@unitsep}% |
| 4649 |
} |
| 4650 |
% \end{macrocode} |
| 4651 |
% \end{macro} |
| 4652 |
% \begin{macro}{\npstyledutch} |
| 4653 |
% Sets the parameters to Dutch habit. |
| 4654 |
% \begin{macrocode} |
| 4655 |
\newcommand*\npstyledutch{% |
| 4656 |
\npthousandsep{\,}% |
| 4657 |
\npdecimalsign{,}% |
| 4658 |
\npproductsign{\cdot}% |
| 4659 |
\npunitseparator{\,}% |
| 4660 |
\npdegreeseparator{}% |
| 4661 |
\npcelsiusseparator{\nprt@unitsep}% |
| 4662 |
\nppercentseparator{}% |
| 4663 |
} |
| 4664 |
% \end{macrocode} |
| 4665 |
% \end{macro} |
| 4666 |
% \begin{macro}{\npstylefrench} |
| 4667 |
% Sets the parameters to French habit. |
| 4668 |
% \begin{macrocode} |
| 4669 |
\newcommand*\npstylefrench{% |
| 4670 |
\npthousandsep{~}% |
| 4671 |
\npdecimalsign{,}% |
| 4672 |
\npproductsign{\cdot}% |
| 4673 |
\npunitseparator{\,}% |
| 4674 |
\npdegreeseparator{}% |
| 4675 |
\npcelsiusseparator{\nprt@unitsep}% |
| 4676 |
\nppercentseparator{\nprt@unitsep}% |
| 4677 |
} |
| 4678 |
% \end{macrocode} |
| 4679 |
% \end{macro} |
| 4680 |
% Do the following actions at \cs{begin\{document\}} to ensure that it |
| 4681 |
% is done after loading \texttt{babel.sty} if it is loaded at all. |
| 4682 |
% \begin{macrocode} |
| 4683 |
\AtBeginDocument{% |
| 4684 |
% \end{macrocode} |
| 4685 |
% By default, automatic language support is switched off for |
| 4686 |
% compatiblity reasons. |
| 4687 |
% Proceed only if it is switched on. |
| 4688 |
% \begin{macrocode} |
| 4689 |
\ifnprt@autolanguage |
| 4690 |
% \end{macrocode} |
| 4691 |
% Automatic language support only works with babel. |
| 4692 |
% \begin{macrocode} |
| 4693 |
\@ifpackageloaded{babel}{% |
| 4694 |
% \end{macrocode} |
| 4695 |
% Adds the language settings to the known languages if they are |
| 4696 |
% provided by babel. |
| 4697 |
% The current version knows all German, English, Portuguese, Dutch, |
| 4698 |
% and French dialects. |
| 4699 |
% \begin{macrocode} |
| 4700 |
\npaddtolanguage{UKenglish}{english}% |
| 4701 |
\npaddtolanguage{USenglish}{english}% |
| 4702 |
\npaddtolanguage{afrikaans}{dutch}% |
| 4703 |
\npaddtolanguage{american}{english}% |
| 4704 |
\npaddtolanguage{austrian}{german}% |
| 4705 |
\npaddtolanguage{british}{english}% |
| 4706 |
\npaddtolanguage{canadian}{english}% |
| 4707 |
\npaddtolanguage{dutch}{dutch}% |
| 4708 |
\npaddtolanguage{english}{english}% |
| 4709 |
\npaddtolanguage{german}{german}% |
| 4710 |
\npaddtolanguage{naustrian}{german}% |
| 4711 |
\npaddtolanguage{ngerman}{german}% |
| 4712 |
\npaddtolanguage{brazil}{portuguese}% |
| 4713 |
\npaddtolanguage{brazilian}{portuguese}% |
| 4714 |
\npaddtolanguage{portuges}{portuguese}% |
| 4715 |
\npaddtolanguage{portuguese}{portuguese}% |
| 4716 |
\npaddtolanguage{francais}{french}% |
| 4717 |
\npaddtolanguage{canadien}{french}% |
| 4718 |
\npaddtolanguage{acadian}{french}% |
| 4719 |
\npaddtolanguage{french}{french}% |
| 4720 |
\npaddtolanguage{frenchb}{french}% |
| 4721 |
% \end{macrocode} |
| 4722 |
% Set the active language again to activate the extras section. |
| 4723 |
% \begin{macrocode} |
| 4724 |
\expandafter\selectlanguage\expandafter{\languagename}% |
| 4725 |
}{% |
| 4726 |
% \end{macrocode} |
| 4727 |
% If |babel| is not loaded but automatic language support is |
| 4728 |
% activated, switch to English as default: |
| 4729 |
% \begin{macrocode} |
| 4730 |
\npstyleenglish |
| 4731 |
}% |
| 4732 |
\fi |
| 4733 |
} |
| 4734 |
% \end{macrocode} |
| 4735 |
% Load configuration file if present. |
| 4736 |
% \begin{macrocode} |
| 4737 |
\InputIfFileExists{numprint.cfg}{% |
| 4738 |
\message{Configuration file `numprint.cfg' loaded.}% |
| 4739 |
}{% |
| 4740 |
\message{No configuration file `numprint.cfg' found.}% |
| 4741 |
} |
| 4742 |
% \end{macrocode} |
| 4743 |
% \begin{macro}{\nprt@renameerror} |
| 4744 |
% A command for producing an error message for redefined macros. |
| 4745 |
% \begin{macrocode} |
| 4746 |
\newcommand*\nprt@renameerror[1]{% |
| 4747 |
\expandafter\def\csname #1\endcsname{% |
| 4748 |
\PackageError{numprint}{This command has been renamed |
| 4749 |
to\MessageBreak |
| 4750 |
\string\np #1}{In order to avoid problems with other |
| 4751 |
packages and for consistency, this\MessageBreak |
| 4752 |
command has been renamed in this version.}% |
| 4753 |
}% |
| 4754 |
} |
| 4755 |
% \end{macrocode} |
| 4756 |
% \end{macro} |
| 4757 |
% \begin{macro}{\fourdigitsep} |
| 4758 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npfourdigitsep}}% |
| 4759 |
% \begin{macro}{\fourdigitnosep} |
| 4760 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npfourdigitnosep}}% |
| 4761 |
% \begin{macro}{\addmissingzero} |
| 4762 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npaddmissingzero}}% |
| 4763 |
% \begin{macro}{\noaddmissingzero} |
| 4764 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npnoaddmissingzero}}% |
| 4765 |
% \begin{macro}{\digits} |
| 4766 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npdigits}}% |
| 4767 |
% \begin{macro}{\nodigits} |
| 4768 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npnodigits}}% |
| 4769 |
% \begin{macro}{\exponentdigits} |
| 4770 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npexponentdigits}}% |
| 4771 |
% \begin{macro}{\noexponentdigits} |
| 4772 |
% \changes{1.00}{2003/10/07}{Renamed to \cs{npnoexponentdigits}}% |
| 4773 |
% Define replacements for the old commands that produce error |
| 4774 |
% messages. |
| 4775 |
% \begin{macrocode} |
| 4776 |
\nprt@renameerror{fourdigitsep} |
| 4777 |
\nprt@renameerror{fourdigitnosep} |
| 4778 |
\nprt@renameerror{addmissingzero} |
| 4779 |
\nprt@renameerror{noaddmissingzero} |
| 4780 |
\nprt@renameerror{digits} |
| 4781 |
\nprt@renameerror{nodigits} |
| 4782 |
\nprt@renameerror{exponentdigits} |
| 4783 |
\nprt@renameerror{noexponentdigits} |
| 4784 |
% \end{macrocode} |
| 4785 |
% \end{macro} |
| 4786 |
% \end{macro} |
| 4787 |
% \end{macro} |
| 4788 |
% \end{macro} |
| 4789 |
% \end{macro} |
| 4790 |
% \end{macro} |
| 4791 |
% \end{macro} |
| 4792 |
% \end{macro} |
| 4793 |
% |
| 4794 |
% \iffalse |
| 4795 |
%</package> |
| 4796 |
% \fi |
| 4797 |
% \Finale |
| 4798 |
|