Debian Codegraph @

texmf-dist/source/latex/nidanfloat/nidanfloat.dtx

raw
1 % \iffalse
2 %% File: nidanfloat.dtx
3 %
4 % Copyright 1994 ASCII Co.
5 % Copyright (c) 2010 ASCII MEDIA WORKS
6 % Copyright (c) 2016-2018 Japanese TeX Development Community
7 %
8 % This file is part of the pLaTeX2e system (community edition).
9 % -------------------------------------------------------------
10 %
11 % \fi
12 %
13 % \iffalse
14 %<*driver>
15 \ifx\JAPANESEtrue\undefined
16 \expandafter\newif\csname ifJAPANESE\endcsname
17 \JAPANESEtrue
18 \fi
19 \def\eTeX{$\varepsilon$-\TeX}
20 \def\pTeX{p\kern-.15em\TeX}
21 \def\epTeX{$\varepsilon$-\pTeX}
22 \def\pLaTeX{p\kern-.05em\LaTeX}
23 \def\pLaTeXe{p\kern-.05em\LaTeXe}
24 %</driver>
25 % \fi
26 %
27 % \setcounter{StandardModuleDepth}{1}
28 %
29 % \StopEventually{}
30 %
31 % \iffalse
32 % \changes{v1.10}{1994/04/07}{platex2.09用}
33 % \changes{v2.2}{1997/10/22}{platex2e用に修正}
34 % \changes{v2.3}{2000/12/20}{一段抜きのフロートを混ぜるとエラーに
35 % なるのを修正(ありがとう、倉沢@QUIPUさん)}
36 % \changes{v2.4}{2001/02/19}{最終ページで左右の行間が揃わない部分を修正}
37 % \changes{v2.4}{2001/02/19}{柱が出ないのを修正}
38 % \changes{v2.4}{2001/07/23}{ページの大きさが小さくなるのを修正}
39 % \changes{v2.5}{2001/09/14}{パッケージオプション(balance,nobalance)を追加}
40 % \changes{v2.6}{2003/05/15}{\cs{@fstype}を\cs{@fstyle}とタイプミスしていた
41 % のを修正(ありがとう、川上@航空宇宙研究所さん)}
42 % \changes{v2.7}{2005/12/09}{必須フォーマットファイルをpLaTeX2eからLaTeX2eへ変更}
43 % \changes{v2.8}{2017/05/01}{\cs{@rightfixht}を追加}
44 % \changes{v2.8}{2017/05/01}{\cs{@outputbox}を作るときの
45 % \texttt{to \cs{@fixht}}の高さ指定をやめた}
46 % \changes{v2.8}{2017/05/01}{\cs{vss}の位置を移動}
47 % \changes{v2.8}{2017/05/01}{右カラム用の処理を丸ごと追加}
48 % \changes{v2.8}{2017/05/01}{右カラムでは\cs{@rightfixht}の高さで
49 % 組み立て、\cs{@colht}も更新するようにした}
50 % \changes{v2.9}{2018/07/28}{Add English documentation
51 % (no code change; thanks David Carlisle)}
52 % \fi
53 %
54 % \iffalse
55 \NeedsTeXFormat{LaTeX2e}
56 %<*driver>
57 \NeedsTeXFormat{pLaTeX2e}
58 \ProvidesFile{nidanfloat.dtx}
59 %</driver>
60 %<core>\ProvidesPackage{nidanfloat}%
61 [2018/07/28 v2.9 Put double-floats at top/bottom within twocolumn mode]
62 %
63 %<*driver>
64 \documentclass{jltxdoc}
65 \GetFileInfo{nidanfloat.dtx}
66 \ifJAPANESE
67 \title{TOP, BOTTOM指定が可能な2段抜きフロート\\
68 バージョン \space\fileversion}
69 \date{作成日:\filedate}
70 \author{中野 賢\footnote{株式会社 アスキー 出版技術部
71 (メールアドレス:ken-na at ascii.co.jp)}}
72 \else
73 \title{TOP, BOTTOM specifiable 2 column floats\\
74 Version \fileversion}
75 \date{Date:\filedate}
76 \author{Ken Nakano\footnote{%
77 Publishing Engineering Department, ASCII Corporation
78 (email: ken-na at ascii.co.jp)}}
79 \fi
80 \begin{document}
81 \maketitle
82 \DocInput{\filename}
83 \end{document}
84 %</driver>
85 % \fi
86 %
87 %\ifJAPANESE
88 % \file{nidanfloat}パッケージは、二段組時に段抜きのフロートをページ下部にも
89 % 配置可能にする。もともとp\LaTeX{}の一部として配布されていましたが、
90 % 全てのフォーマットをサポートできることから、
91 % 2018年以降は独立して配布することにしました。
92 %
93 % English documentation is available as ``nidanfloat-en.pdf''
94 % (thanks David Carlisle).
95 %\else
96 % The package \textsf{nidanfloat} enables bottom (|b|) placement option
97 % for double float in two column mode (\emph{nidan-kumi}).
98 % This package was originally part of Japanese \pLaTeX,
99 % and now is distributed as a separate package because
100 % it supports all \LaTeX\ formats.
101 %
102 % 日本語版ドキュメントは``nidanfloat.pdf``です。
103 %\fi
104 %
105 % [TODO] This package needs adjustment for \LaTeXe\ 2015/01/01 changes
106 % of the float order in two column mode!
107 %
108 %\ifJAPANESE
109 % \section{コード}
110 %\else
111 % \section{Code}
112 %\fi
113 %
114 %\ifJAPANESE
115 % \subsection{パッケージオプション}
116 %\else
117 % \subsection{Package Options}
118 %\fi
119 %
120 %\ifJAPANESE
121 % \changes{v2.5}{2001/09/14}{パッケージオプションを追加}
122 % \file{nidanfloat}パッケージでは、最終ページの左右カラムの高さを
123 % 均一に振り分けるようにしている。しかし、この機能の影響により、
124 % 最終ページでの|\newpage|と|\clearpage|コマンドが正しく動作しない。
125 % そこで、この機能を使うかどうかを指定するオプションを導入した。
126 % パッケージ指定時にオプション``balance''を指定すると、
127 % 最終ページの自動調整を行なうようになる。デフォルトでは行なわない。
128 %\else
129 % In the \file{nidanfloat} package, the height of the left and right columns
130 % of the last page set is designed to be equalised.
131 % However, due to the effect of this function, the
132 % |\newpage| and |\clearpage| commands on last page do not work properly.
133 % We introduced an option to specify whether or not to use this function.
134 % If you specify the option `` balance'' when specifying a package,
135 % automatic adjustment of last page will be done. It is not done by default.
136 %\fi
137 % \begin{macrocode}
138 %<*core>
139 \DeclareOption{balance}{\AtEndDocument{\let\clearpage\balanceclearpage}}
140 \DeclareOption{nobalance}{\relax}
141 \ExecuteOptions{nobalance}
142 \ProcessOptions
143 % \end{macrocode}
144 %
145 %\ifJAPANESE
146 % \subsection{フロートパラメータ}
147 % ここでは、段抜きのフロートをページ下部に置くために作成したパラメータに
148 % ついて説明をする。
149 %\else
150 % \subsection{Float parameters}
151 % Here, we explain the parameters created to place a floating float
152 % at the bottom of the page.
153 %\fi
154 %
155 % \begin{macro}{\dblbotfraction}
156 %\ifJAPANESE
157 % 2段組時にページ下部に占めることのできる、二段抜きフロートの割合。
158 % デフォルトは0.5、すなわちページ半分を占めることができるようにしている。
159 %\else
160 % Percentage of a page that may be occupied by a two-column float.
161 % The default is 0.5, which means that it can occupy half of the page.
162 %\fi
163 % \begin{macrocode}
164 \newcommand\dblbotfraction{0.5}
165 % \end{macrocode}
166 % \end{macro}
167 %
168 % \begin{macro}{\c@dblbotnumber}
169 %\ifJAPANESE
170 % ページ下部に入れることのできる、二段抜きフロートの数。
171 % デフォルトでは、二つの図を置くことができるようにしている。
172 % |\c@dblbotnumber|はカウンタ|dblnumber|の内部形式。
173 %\else
174 % Number of two-column floats that can be placed at the bottom of the page.
175 % By default this is set to 2.
176 % |\c@dblbotnumber| is the internal format of the counter |dblnumber|.
177 %\fi
178 % \begin{macrocode}
179 \newcount\c@dblbotnumber
180 \setcounter{dblbotnumber}{2}
181 % \end{macrocode}
182 % \end{macro}
183 %
184 % \begin{macro}{\@dblbotroom}
185 % \begin{macro}{\@dblbotnum}
186 %\ifJAPANESE
187 % |\@dblbotroom|は、ページ下部に占めることのできる、
188 % 二段抜きフロートの割合を示す長さ変数。
189 % |\@dblbotnum|は、ページ下部に入れることのできる、
190 % 二段抜きフロートの数を保持するカウンタ。
191 %\else
192 % |\@dblbotroom|: Length variable indicating the percentage
193 % of the page a two-column float can occupy at the bottom of the page.
194 % |\@dblbotnum|: Counter that holds the number of two-column floats
195 % that can be placed at the bottom of the page.
196 %\fi
197 % \begin{macrocode}
198 \newdimen\@dblbotroom
199 \newcount\@dblbotnum
200 % \end{macrocode}
201 % \end{macro}
202 % \end{macro}
203 %
204 % \begin{macro}{\@dblfloatplacement}
205 %\ifJAPANESE
206 % 二段組用のフロートパラメータを設定するマクロを、新たに追加したパラメータ
207 % も設定するように再定義する。
208 %\else
209 % Redefine this macro to set the newly added parameters.
210 %\fi
211 % \begin{macrocode}
212 \def\@dblfloatplacement{%
213 \global\@dbltopnum\c@dbltopnumber
214 \global\@dblbotnum\c@dblbotnumber % added
215 \global\@dbltoproom\dbltopfraction\@colht
216 \global\@dblbotroom\dblbotfraction\@colht % added
217 \@textmin\@colht
218 \advance\@textmin-\@dbltoproom
219 \advance\@textmin-\@dblbotroom % added
220 \@fpmin\dblfloatpagefraction\textheight
221 \@fptop\@dblfptop
222 \@fpsep\@dblfpsep
223 \@fpbot\@dblfpbot
224 }
225 % \end{macrocode}
226 % \end{macro}
227 %
228 %\ifJAPANESE
229 % \subsection{フロートリストへの登録}
230 % 二段抜きフロートの定義は、クラスファイルで次のようにして行なわれる。
231 %\else
232 % \subsection{Define float lists}
233 % The definition of a double column float should be done in
234 % a class file, as follows.
235 %\fi
236 %\begin{verbatim}
237 % \newenvironment{figure*}
238 % {\@dblfloat{figure}}
239 % {\end@dblfloat}
240 %\end{verbatim}
241 %\ifJAPANESE
242 % 文章中で|figure*|環境で囲まれた部分は、フロート保持用のリストに登録される。
243 % この節では、段抜きフロートをページ下部にも置けるようにするために拡張した
244 % マクロについて説明をする。
245 %\else
246 % The content of |figure*| environment is registered in the two-column float
247 % holding list.
248 % In this section, we expand it so that you can put a float at the bottom of the page.
249 %\fi
250 % \begin{macro}{\@dblbotlist}
251 % \begin{macro}{\L@toplist}
252 % \begin{macro}{\R@toplist}
253 % \begin{macro}{\L@botlist}
254 % \begin{macro}{\R@botlist}
255 %\ifJAPANESE
256 % 二段組のページ下部に置くフロートを保持するために|\@dblbotlist|を追加する。
257 % また、カラムの上下に置くフロート用には、左側と右側で区別をするため、
258 % |\L@toplist|, |\R@toplist|, |\L@botlist|, |\R@botlist|を追加する。
259 %\else
260 % Add the |\@dblbotlist| to hold the float to be placed at the bottom of
261 % the two-column page.
262 % In addition, for floats to be placed above and below the column,
263 % distinguish between the left side and the right side,
264 %\fi
265 % \begin{macrocode}
266 \gdef\@dblbotlist{}
267 \gdef\L@toplist{}
268 \gdef\R@toplist{}
269 \gdef\L@botlist{}
270 \gdef\R@botlist{}
271 % \end{macrocode}
272 % \end{macro}
273 % \end{macro}
274 % \end{macro}
275 % \end{macro}
276 % \end{macro}
277 %
278 % \begin{macro}{\@dblfloat}
279 % \begin{macro}{\@dbflt}
280 % \begin{macro}{\end@dblfloat}
281 %\ifJAPANESE
282 % |\@dblfloat|から呼び出される、|\@dbflt|を再定義し、位置指定が省略された
283 % ときのパラメータを``tb''とする。また、|\end@dblfloat|を|\end@float|にして、
284 % 現在ページの下部にフロートを置けるようにする。
285 %\else
286 % |\@dblfloat|, |\@dbflt| is redefined so that the default position
287 % argument is set to ``tb''. Also, set |\end@dblfloat| to |\end@float| to
288 % allow floats to be placed at the bottom of the page.
289 %\fi
290 % \begin{macrocode}
291 \def\@dblfloat{%
292 \if@twocolumn\let\reserved@a\@dbflt\else\let\reserved@a\@float\fi
293 \reserved@a}
294 \def\@dbflt#1{\@ifnextchar[{\@xdblfloat{#1}}{\@xdblfloat{#1}[tb]}}
295 \def\@xdblfloat#1[#2]{%
296 \@xfloat{#1}[#2]\hsize\textwidth\linewidth\textwidth}
297 \let\end@dblfloat\end@float
298 % \end{macrocode}
299 % \end{macro}
300 % \end{macro}
301 % \end{macro}
302 %
303 % \begin{macro}{\@addtocurcol}
304 %\ifJAPANESE
305 % |\@xdblfloat|から呼び出された、|\@xfloat|は位置指定オプションの評価を行ない、
306 % フロートオブジェクトの組み立てを開始する。
307 % フロートオブジェクトの組み立ては|\end@float|で終了する。
308 % |\end@float|は、ペナルティ値を$-10004$にして|\output|ルーチンを起動する。
309 % この値での|\output|ルーチンは|\@specialoutput|を起動する。
310 % |\@specialoutput|は|\@addtocurcol|を呼び出し、フロートの内容を現在ページに
311 % 出力できるのならば出力をする。そうでなければ、別の可能性を探る。
312 %\else
313 % Called from | @xdblfloat|, |\@xfloat| evaluates the position specification option,
314 % and start building the float object.
315 % Assembling a float object ends with |\end@float|.
316 % |\end@float| starts the |\output| routine with a penalty value of $-10004$.
317 % The |\output| routine with this value invokes |\@specialoutput|.
318 % |\@specialoutput| calls |\@addtocurcol| to move the contents of the float to
319 % the current page.
320 % If it can be output, then do so; otherwise we explore another possibility.
321 %\fi
322 % \begin{macrocode}
323 \def\@addtocurcol{%
324 % \end{macrocode}
325 %\ifJAPANESE
326 % このパッケージの場合、段抜きのフロートが渡される可能性があるので、まず、
327 % それをチェックする。フロートの幅がカラム幅よりも大きい場合は、強制的に
328 % 段抜きフロートとして扱う。
329 %\else
330 % In the case of this package, there is a possibility that a double column
331 % float may be passed, so check it. If the width of the float is larger
332 % than the column width, forcibly treat as starred, double column float.
333 %\fi
334 % \begin{macrocode}
335 \ifdim\wd\@currbox>\columnwidth
336 \@addtodblcol
337 \else
338 % \end{macrocode}
339 %\ifJAPANESE
340 % それ以外の場合は、元の動作とほとんど同じである。
341 %\else
342 % Otherwise, it is almost the same as the original version.
343 %\fi
344 % \begin{macrocode}
345 \@insertfalse
346 \@setfloattypecounts
347 \ifnum\@fpstype=8 % is only `!p'
348 \else
349 \ifnum\@fpstype=24 % is only `p'
350 \else
351 \@flsettextmin
352 \advance\@textmin\@textfloatsheight
353 \@reqcolroom\@pageht
354 \ifdim\@textmin>\@reqcolroom \@reqcolroom\@textmin\fi
355 \advance\@reqcolroom\ht\@currbox
356 \ifdim\@colroom>\@reqcolroom
357 \@flsetnum\@colnum
358 \ifnum\@colnum>\z@
359 \@bitor\@currtype\@deferlist
360 \if@test
361 \else
362 % \end{macrocode}
363 %\ifJAPANESE
364 % ページ下部のフロートを保持しているフロートリストの名前が異なる。
365 %\else
366 % The only difference from \LaTeX\ is the name of float list,
367 %\fi
368 % \begin{macrocode}
369 \@bitor\@currtype{\L@botlist\R@botlist}%
370 \if@test
371 \@addtobot
372 \else
373 \ifodd\count\@currbox
374 \advance\@reqcolroom\intextsep
375 \ifdim\@colroom>\@reqcolroom
376 \global\advance\@colnum\m@ne
377 \global\advance\@textfloatsheight\ht\@currbox
378 \global\advance\@textfloatsheight 2\intextsep
379 \@cons\@midlist\@currbox
380 \if@nobreak
381 \nobreak
382 \@nobreakfalse
383 \everypar{}%
384 \else
385 \addpenalty \interlinepenalty
386 \fi
387 \vskip\intextsep
388 \box\@currbox
389 \penalty\interlinepenalty
390 \vskip\intextsep
391 \ifnum\outputpenalty<-\@Mii \vskip-\parskip \fi
392 \outputpenalty\z@
393 \@inserttrue
394 \fi
395 \fi
396 \if@insert\else\@addtotoporbot\fi
397 \fi
398 \fi
399 \fi
400 \fi
401 \fi
402 \fi
403 \if@insert\else\@resethfps\@cons\@deferlist\@currbox\fi
404 \fi
405 }
406 % \end{macrocode}
407 % \end{macro}
408 %
409 % \begin{macro}{\@addtotoporbot}
410 %\ifJAPANESE
411 % フロートを保持しているリスト変数の修正。
412 % \changes{v2.3}{2000/12/20}{%
413 % タイプミスの修正と\cs{@flcheckspace}の呼び出しを変更}
414 %\else
415 % Update variables holding float lists.
416 %\fi
417 % \begin{macrocode}
418 \def\@addtotoporbot{%
419 \@getfpsbit \tw@
420 \ifodd\@tempcnta
421 \@flsetnum\@topnum
422 \ifnum\@topnum>\z@
423 \@tempswafalse
424 \@flcheckspace\@toproom\@toplist\L@toplist\R@toplist
425 \if@tempswa
426 \@bitor\@currtype{\@midlist\L@botlist\R@botlist}%
427 \if@test\else
428 \if@firstcolumn
429 \@flupdates \@topnum \@toproom \L@toplist
430 \else
431 \@flupdates \@topnum \@toproom \R@toplist
432 \fi
433 \@inserttrue
434 \fi
435 \fi
436 \fi
437 \fi
438 \if@insert\else\@addtobot\fi
439 }
440 % \end{macrocode}
441 % \end{macro}
442 %
443 % \begin{macro}{\@addtobot}
444 %\ifJAPANESE
445 % フロートを保持しているリスト変数の修正。
446 % \changes{v2.3}{2000/12/20}{\cs{@flcheckspace}の呼び出しを変更}
447 %\else
448 % Update variables holding float lists.
449 %\fi
450 % \begin{macrocode}
451 \def\@addtobot{%
452 \@getfpsbit 4\relax
453 \ifodd\@tempcnta
454 \@flsetnum\@botnum
455 \ifnum\@botnum>\z@
456 \@tempswafalse
457 \@flcheckspace\@botroom\@botlist\L@botlist\R@botlist
458 \if@tempswa
459 \global\maxdepth\z@
460 \if@firstcolumn
461 \@flupdates \@botnum \@botroom \L@botlist
462 \else
463 \@flupdates \@botnum \@botroom \R@botlist
464 \fi
465 \@inserttrue
466 \fi
467 \fi
468 \fi
469 }
470 % \end{macrocode}
471 % \end{macro}
472 %
473 % \begin{macro}{\org@addtonextcol}
474 % \begin{macro}{\@addtonextcol}
475 %\ifJAPANESE
476 % これらは、挿入に失敗したフロートや`p'指定のフロートを出力するために、
477 % |\@startcolumn|で用いられる。このパッケージでは、カラム幅よりも大きい幅を
478 % 持つフロートに対しては、段抜きフロートリストとして出力するようにしている。
479 %\else
480 % These macros are used inside |\@startcolumn|, to output a float
481 % that failed to be inserted or a float specified by `p'.
482 % In this package, a width larger than the column width
483 % signals the float should be added to the double column float list.
484 %\fi
485 % \begin{macrocode}
486 \let\org@addtonextcol\@addtonextcol
487 \def\@addtonextcol{%
488 \ifdim\wd\@currbox>\columnwidth
489 \@addtodblcol
490 \else
491 \org@addtonextcol
492 \fi
493 }
494 % \end{macrocode}
495 % \end{macro}
496 % \end{macro}
497 %
498 % \begin{macro}{\@addtodblcol}
499 %\ifJAPANESE
500 % |\@addtodblcol|マクロは、フロートオブジェクトが現在ページに入るかどうか
501 % を確認し、入るのであれば|\@addtodbltoporbot|を呼び出す。そうでなければ、
502 % |\@dbldeferlist|に登録する。
503 %
504 % まず|@insert|フラグを偽にする。そして、フロートタイプを|\@fpstype|に得る。
505 % フロートタイプが8または24の場合、位置オプションは`!p'か`p'だけであるので、
506 % 無条件に|\@dbldeferlist|に加える。
507 %\else
508 % The |\@addtodblcol| macro determines whether the float object fits in
509 % the current page and calls |\@addtodbltoporbot| if it would fit.
510 % Otherwise, adds to |\@dbldeferlist|.
511 %
512 % First set |@insert| flag to false, obtain the float type as |\@fpstype|.
513 % If the float type is 8 or 24, the position option is only `!p 'or `p', so
514 % unconditionally add to |\@dbldeferlist|.
515 %\fi
516 % \begin{macrocode}
517 \def\@addtodblcol{%
518 \begingroup
519 \@insertfalse
520 \@setfloattypecounts
521 \ifnum\@fpstype=8 % is only `!p'
522 \else
523 \ifnum\@fpstype=24 % is only `p'
524 \else
525 % \end{macrocode}
526 %\ifJAPANESE
527 % そうでなければ、同タイプのフロートで未出力のものがあるかどうかを確認する。
528 % 同タイプのフロートでまだ出力していないものがある場合は、現在のフロートを
529 % 出力しない。ただし、同タイプであってもカラム幅のフロートについては考慮
530 % しない。出力することができるのならば、|\@addtodblbotortop|を呼び出す。
531 %\else
532 % Otherwise, check whether there are unplaced ones of the same float type.
533 % If there is a float of the same type that has not been output yet,
534 % do not output. However, even with the same type, consider the float column width.
535 % If you can output it, call |\@addtodblbotortop|.
536 %\fi
537 % \begin{macrocode}
538 \@bitor\@currtype{\@dbldeferlist}
539 %\@bitor\@currtype{\@deferlist\@dbldeferlist}
540 \if@test
541 \else
542 \@tempswafalse
543 \@checkdblspace
544 \if@tempswa
545 \@addtodbltoporbot
546 \fi
547 \fi
548 \fi
549 \fi
550 \if@insert\else\@cons\@dbldeferlist\@currbox\fi
551 \endgroup
552 }
553 % \end{macrocode}
554 % \end{macro}
555 %
556 % \begin{macro}{\@addtodbltoporbot}
557 %\ifJAPANESE
558 % まず、`t'の指定があるかと、ページ上部に入れる数を越えていないかを確認する。
559 %\else
560 % First, check whether there is a specification of `t',
561 % and whether it exceeds the number allowed at the top of the page.
562 %\fi
563 % \begin{macrocode}
564 \def\@addtodbltoporbot{%
565 \@getfpsbit \tw@
566 \ifodd\@tempcnta
567 \@flsetnum\@dbltopnum
568 \ifnum\@dbltopnum>\z@
569 % \end{macrocode}
570 %\ifJAPANESE
571 % そして、ページ上部あるいは下部に同タイプのフロートが出力される可能性が
572 % あるのかを調べる。二段組フロートは一段組フロートの上部に置かれることに注意。
573 %\else
574 % Then, check whether the same type of float may be output at the top or
575 % bottom of the page.
576 % Note that two-column floats are placed on the top of a one-column floats.
577 %\fi
578 % \begin{macrocode}
579 \@bitor\@currtype{%
580 \L@toplist\R@toplist\L@botlist\R@botlist\@dblbotlist}
581 \if@test
582 \else
583 % \end{macrocode}
584 %\ifJAPANESE
585 % 配置可能ならば、出力するだけのスペースがあるのかを確認する。
586 %\else
587 % If possible, check if there is enough space to output the float.
588 %\fi
589 % \begin{macrocode}
590 \@tempswafalse
591 \@dblflcheckspace \@dbltoproom \@dbltoplist
592 % \end{macrocode}
593 %\ifJAPANESE
594 % スペースがあれば、段抜きフロートが上部に占めることのできる高さから、
595 % その分を引く。また、上部に入れる段抜きフロートの数を減らし、
596 % 上部段抜き用のフロートリストに登録をする。
597 %\else
598 % If there is a space, subtract the height of the float from
599 % the space available for top floats. Also, reduce the number of
600 % starred floats to put in the top,
601 % and update the float list for double column top floats.
602 %\fi
603 % \begin{macrocode}
604 \if@tempswa
605 \@tempdima-\ht\@currbox
606 \advance\@tempdima
607 -\ifx\@dbltoplist\@empty \dbltextfloatsep\else\dblfloatsep\fi
608 \global\advance\@dbltoproom\@tempdima
609 \global\advance\@dbltopnum\m@ne
610 \@cons\@dbltoplist\@currbox
611 % \end{macrocode}
612 %\ifJAPANESE
613 % 左カラムのときは、カラムの高さ|\@colroom|からフロート分を引く。
614 %\else
615 % For the left column, subtract the float from the column height |\@colroom|.
616 %\fi
617 % \begin{macrocode}
618 \if@firstcolumn
619 \advance\@colroom\@tempdima
620 \global\advance\@colroom\maxdepth
621 % \end{macrocode}
622 %\ifJAPANESE
623 % 右カラムのときは、新規の段抜きフロート分だけでなく、これを挿入すること
624 % によって、左カラムから移動してくるテキストの高さも引く。
625 %\else
626 % In the case of the right column, insert not only the new float,
627 % also the height of the text moved from the left column is decreased.
628 %\fi
629 % \begin{macrocode}
630 \else
631 \@tempdima\textheight
632 \@chkdblfloatht\advance\@tempdima-\@floatht
633 \L@chkfloatht\advance\@tempdima-\@floatht
634 \vbadness=\@M \splittopskip=\topskip \splitmaxdepth=\maxdepth
635 \setbox\z@=\vbox{\unvcopy\@leftcolumn}%
636 \setbox\@ne=\vsplit\z@ to\@tempdima
637 \advance\@colroom-\ht\z@
638 \global\advance\@colroom-\dp\z@
639 \fi
640 % \end{macrocode}
641 %\ifJAPANESE
642 % 最後に、|@insert|フラグを真にする。
643 %\else
644 % Finally, set the |@insert| flag to true.
645 %\fi
646 % \begin{macrocode}
647 \@inserttrue
648 \fi
649 \fi
650 \fi
651 \fi
652 \if@insert\else\@addtodblbot\fi
653 }
654 % \end{macrocode}
655 % \end{macro}
656 %
657 % \begin{macro}{\@addtodblbot}
658 %\ifJAPANESE
659 % ページ下部に段抜きフロートを置くときも、上部と同じである。
660 % ただし、二段組フロートは最下部に置かれるので、他の出力用リストを調べる
661 % 必要はないことが異なる。
662 %\else
663 % Placing a two-column float at the bottom of the page is
664 % similar to the preceding section.
665 % However, because a two-column float is placed at the very bottom,
666 % we don't have to examine other output lists.
667 %\fi
668 % \begin{macrocode}
669 \def\@addtodblbot{%
670 \@getfpsbit 4\relax
671 \ifodd\@tempcnta
672 \@flsetnum\@botnum
673 \ifnum\@botnum>\z@
674 \@tempswafalse
675 \@dblflcheckspace \@dbltoproom \@dbltoplist
676 \if@tempswa
677 \@tempdima-\ht\@currbox \advance\@tempdima
678 -\ifx\@dblbotlist\@empty \dbltextfloatsep\else\dblfloatsep\fi
679 \global\advance\@dblbotroom\@tempdima
680 \global\advance\@dblbotnum\m@ne
681 \@cons\@dblbotlist\@currbox
682 \if@firstcolumn
683 \advance\@colroom\@tempdima
684 \global\advance\@colroom\maxdepth
685 \else
686 \@tempdima\textheight
687 \@chkdblfloatht\advance\@tempdima-\@floatht
688 \L@chkfloatht\advance\@tempdima-\@floatht
689 \vbadness=\@M \splittopskip=\topskip \splitmaxdepth=\maxdepth
690 \setbox\z@=\vbox{\unvcopy\@leftcolumn}%
691 \setbox\@ne=\vsplit\z@ to\@tempdima
692 \advance\@colroom-\ht\z@
693 \global\advance\@colroom-\dp\z@
694 \fi
695 \@inserttrue
696 \fi
697 \fi
698 \fi
699 }
700 % \end{macrocode}
701 % \end{macro}
702 %
703 %\ifJAPANESE
704 % \subsection{フロートの高さを計算するマクロ}
705 %\else
706 % \subsection{Macro to calculate float height}
707 %\fi
708 %
709 % \begin{macro}{\@floatht}
710 %\ifJAPANESE
711 % |\@floatht|は、出力リストに格納されているフロートの高さを格納するのに用いる。
712 %\else
713 % |\@floatht| is used to store the float height stored in the output list.
714 %\fi
715 % \begin{macrocode}
716 \global\newdimen\@floatht \@floatht\z@
717 % \end{macrocode}
718 % \end{macro}
719 %
720 % \begin{macro}{\@flcheckspace}
721 %\ifJAPANESE
722 % \changes{v2.3}{2000/12/20}{状況別に場合わけするようにした}
723 %\fi
724 % \begin{macrocode}
725 \def \@flcheckspace #1#2#3#4{%
726 \advance \@reqcolroom
727 \if@twocolumn
728 \if@firstcolumn
729 \ifx #3\@empty \textfloatsep \else \floatsep \fi
730 \else
731 \ifx #4\@empty \textfloatsep \else \floatsep \fi
732 \fi
733 \else
734 \ifx #2\@empty \textfloatsep \else \floatsep \fi
735 \fi
736 \ifdim \@colroom>\@reqcolroom
737 \ifdim #1>\ht\@currbox
738 \@tempswatrue
739 \else
740 \ifnum \@fpstype<\sixt@@n
741 \@tempswatrue
742 \fi
743 \fi
744 \fi
745 }
746 % \end{macrocode}
747 % \end{macro}
748 %
749 % \begin{macro}{\@dblflcheckspace}
750 %\ifJAPANESE
751 % 段抜きフロートがページ上部あるいは下部に占めることのできる割合を越えて
752 % いないかをチェックする。越えていなければ|\@tempswa|を真にする。
753 % \changes{v2.6}{2003/05/15}{\cs{@fstype}を\cs{@fstyle}とタイプミスしていた}
754 %\else
755 % Check if the percentage that can be occupied by floats
756 % on the top or bottom of the page has been exceeded.
757 % If not, |\@tempswa| will be made true.
758 %\fi
759 % \begin{macrocode}
760 \def\@dblflcheckspace#1#2{%
761 \@tempdima=#1\relax
762 \advance\@tempdima
763 -\ifx #2\@empty \dbltextfloatsep\else\dblfloatsep\fi
764 \ifdim\@tempdima>\ht\@currbox
765 \@tempswatrue
766 \else
767 \ifnum\@fpstype<\sixt@@n
768 \advance\@tempdima\@textmin
769 \if \@tempdima>\ht\@currbox
770 \@tempswatrue
771 \fi
772 \fi
773 \fi
774 }
775 % \end{macrocode}
776 % \end{macro}
777 %
778 % \begin{macro}{\@checkdblspace}
779 %\ifJAPANESE
780 % 段抜きフロートと段抜きフロート間スペース(あるいは段抜きフロートとテキストと
781 % の間のスペース)を入れる余裕があるかを調べる。
782 %
783 % まず、現在、組み立ててあるテキストの高さと、最小限入らなくてはならない
784 % テキストの量とを比較し、大きいほうを|\@tempdima|に格納する。
785 % 右カラムにいるときは、左カラムのテキストの高さも加える。
786 %\else
787 % Check whether the float would fit in the space allocated to text page floats.
788 %
789 % First, compare the height of text currently assembled with the amount of text
790 % that must be minimized, and store the larger one in |\@tempdima|.
791 % If you are in the right column, also add the height of the text in the left column.
792 %\fi
793 % \begin{macrocode}
794 \def\@checkdblspace{%
795 \@tempdima\@pageht\advance\@tempdima\@pagedp
796 \@tempdimb\textfraction\@colht
797 \ifdim\@tempdima<\@tempdimb \@tempdima\@tempdimb\fi
798 \if@firstcolumn\else
799 \advance\@tempdima\ht\@leftcolumn
800 \advance\@tempdima\dp\@leftcolumn
801 \fi
802 % \end{macrocode}
803 %\ifJAPANESE
804 % そして、出力する予定のカラム幅フロートと段抜きフロートの高さを加える。
805 % このとき、段抜き用のフロートの高さは二倍する。
806 %\else
807 % Then add the height of the column width float and
808 % two-column float that are to be output.
809 % At this time, double the height of the two-column float.
810 %\fi
811 % \begin{macrocode}
812 \L@chkfloatht\advance\@tempdima\@floatht
813 \R@chkfloatht\advance\@tempdima\@floatht
814 \@chkdblfloatht\advance\@tempdima\tw@\@floatht
815 % \end{macrocode}
816 %\ifJAPANESE
817 % それから、現在のフロートの高さと必要なスペースを加える。
818 % このときも、それらの高さを二倍する。
819 %\else
820 % Then add the current float height and required space.
821 % Again, double their heights.
822 %\fi
823 % \begin{macrocode}
824 \@tempdimb\ht\@currbox\advance\@tempdimb\dp\@currbox
825 \advance\@tempdimb
826 \ifdim\@floatht>\z@ \dbltextfloatsep\else\dblfloatsep\fi
827 \multiply\@tempdimb\tw@ \advance\@tempdima\@tempdimb
828 % \end{macrocode}
829 %\ifJAPANESE
830 % これらすべての要素分の高さが|\textheight|の2倍よりも小さければ、
831 % 現在のフロートを置くことができると判断する。
832 %\else
833 % If the height of all these elements is less than twice the |\textheight|,
834 % we can place the current float.
835 %\fi
836 % \begin{macrocode}
837 \ifdim\@tempdima>\tw@\textheight
838 \@tempswafalse
839 \else
840 \@tempswatrue
841 \fi
842 }
843 % \end{macrocode}
844 % \end{macro}
845 %
846 % \begin{macro}{\tmp@comflelt}
847 % \begin{macro}{\tmp@comdblflelt}
848 %\ifJAPANESE
849 % 出力リストに格納されているフロートの高さを計るために用いる。
850 % それぞれ、|\@comfelt|, |\@comdblflelt|と同じだが、フロートの内容が
851 % 失われないように|\copy|をしているのが異なる。
852 %\else
853 % Used to measure the height of the float stored in the output list.
854 % Almost the same as |\@comfelt|, |\@comdblflelt| respectively, but
855 % use |\copy| so that the original box is not lost.
856 %\fi
857 % \begin{macrocode}
858 \def\tmp@comflelt#1{%
859 \setbox\@tempboxa
860 \vbox{\unvbox\@tempboxa\copy #1\vskip\floatsep}%
861 }
862 \def\tmp@comdblflelt#1{%
863 \setbox\@tempboxa
864 \vbox{\unvbox\@tempboxa\copy #1\vskip\dblfloatsep}%
865 }
866 % \end{macrocode}
867 % \end{macro}
868 % \end{macro}
869 %
870 % \begin{macro}{\L@chkfloatht}
871 % \begin{macro}{\R@chkfloatht}
872 %\ifJAPANESE
873 % それぞれ、左カラムと右カラムに出力するフロートの高さを計算するのに用いる。
874 % 計算結果は|\@floatht|に格納する。
875 %\else
876 % Used to calculate the height of the float to be output to the left and
877 % right column, respectively.
878 % The calculation result is stored in |\@floatht|.
879 %\fi
880 % \begin{macrocode}
881 \def\L@chkfloatht{\@floatht\z@
882 \ifx\L@toplist\@empty\else
883 \let\@elt\tmp@comflelt\setbox\@tempboxa\vbox{}\L@toplist
884 \setbox\@ne\vbox{\boxmaxdepth\maxdepth
885 \unvbox\@tempboxa\vskip-\floatsep\topfigrule\vskip\textfloatsep
886 }%
887 \let\@elt\relax \advance\@floatht\ht\@ne \advance\@floatht\dp\@ne
888 \fi
889 \ifx\L@botlist\@empty\else
890 \let\@elt\tmp@comflelt\setbox\@tempboxa\vbox{}\L@botlist
891 \setbox\@ne\vbox{\boxmaxdepth\maxdepth
892 \vskip\textfloatsep\botfigrule\unvbox\@tempboxa\vskip-\floatsep
893 }%
894 \let\@elt\relax \advance\@floatht\ht\@ne \advance\@floatht\dp\@ne
895 \fi
896 \global\@floatht\@floatht
897 }
898 \def\R@chkfloatht{\@floatht\z@
899 \ifx\R@toplist\@empty\else
900 \let\@elt\tmp@comflelt\setbox\@tempboxa\vbox{}\R@toplist
901 \setbox\@ne\vbox{\boxmaxdepth\maxdepth
902 \unvbox\@tempboxa\vskip-\floatsep\topfigrule\vskip\textfloatsep
903 }%
904 \let\@elt\relax \advance\@floatht\ht\@ne \advance\@floatht\dp\@ne
905 \fi
906 \ifx\R@botlist\@empty\else
907 \let\@elt\tmp@comflelt\setbox\@tempboxa\vbox{}\R@botlist
908 \setbox\@ne\vbox{\boxmaxdepth\maxdepth
909 \vskip\textfloatsep\botfigrule\unvbox\@tempboxa\vskip-\floatsep
910 }%
911 \let\@elt\relax \advance\@floatht\ht\@ne \advance\@floatht\dp\@ne
912 \fi
913 \global\@floatht\@floatht
914 }
915 % \end{macrocode}
916 % \end{macro}
917 % \end{macro}
918 %
919 % \begin{macro}{\@chkdblfloatht}
920 %\ifJAPANESE
921 % ページ上部と下部に出力する段抜きフロートの高さを計算し、
922 % 結果を|\@floatht|に格納する。
923 %\else
924 % Calculate the height of the double float output on the top and bottom
925 % of the page, store the result in |\@floatht|.
926 %\fi
927 % \begin{macrocode}
928 \def\@chkdblfloatht{\@floatht\z@
929 \ifx\@dbltoplist\@empty\else
930 \let\@elt\tmp@comdblflelt\setbox\@tempboxa\vbox{}\@dbltoplist
931 \setbox\@ne\vbox{\boxmaxdepth\maxdepth
932 \unvbox\@tempboxa
933 \vskip-\dblfloatsep
934 \dblfigrule
935 \vskip\dbltextfloatsep
936 }%
937 \let\@elt\relax \advance\@floatht\ht\@ne \advance\@floatht\dp\@ne
938 \fi
939 \ifx\@dblbotlist\@empty\else
940 \let\@elt\tmp@comdblflelt\setbox\@tempboxa\vbox{}\@dblbotlist
941 \setbox\@ne\vbox{\boxmaxdepth\maxdepth
942 \vskip\dbltextfloatsep
943 \dblfigrule
944 \unvbox\@tempboxa
945 \vskip-\dblfloatsep
946 }%
947 \let\@elt\relax \advance\@floatht\ht\@ne \advance\@floatht\dp\@ne
948 \fi
949 \global\@floatht\@floatht
950 }
951 % \end{macrocode}
952 % \end{macro}
953 %
954 %\ifJAPANESE
955 % \subsection{フロートとテキストのマージ}
956 %\else
957 % \subsection{Merging float and text}
958 %\fi
959 %
960 % \begin{macro}{\@fixht}
961 %\ifJAPANESE
962 % |\@fixht|は、左カラムの高さを格納するのに用いる。
963 %\else
964 % |\@fixht| is used to store the height of the left column.
965 %\fi
966 % \begin{macrocode}%
967 \global\newdimen\@fixht
968 % \end{macrocode}
969 % \end{macro}
970 %
971 % \begin{macro}{\@rightfixht}
972 %\ifJAPANESE
973 % \emph{日本語\TeX{}開発コミュニティによる追加}:
974 % |\@rightfixht|は、右カラムの高さを格納するのに用いる。
975 % \changes{v2.8}{2017/05/01}{\cs{@rightfixht}を追加}
976 %\else
977 % \emph{Added by the Japanese \TeX\ development community}:
978 % |\@rightfixht| is used to store the height of the right column.
979 %\fi
980 % \begin{macrocode}
981 \global\newdimen\@rightfixht
982 % \end{macrocode}
983 % \end{macro}
984 %
985 % \begin{macro}{\@combinefloats}
986 %\ifJAPANESE
987 % \changes{v2.4}{2001/07/23}{\cs{boxmaxdepth}を\cs{maxdepth}にしないようにした}
988 % |\@combinefloats|は、カラム単位で、テキストとフロートをマージする。
989 % このマクロは右カラムのときに実行する。
990 %\else
991 % This macro is executed in the right column.
992 %\fi
993 % \begin{macrocode}
994 \def\@combinefloats{%
995 %%\boxmaxdepth\maxdepth
996 \if@twocolumn
997 \if@firstcolumn
998 \else
999 % \end{macrocode}
1000 %\ifJAPANESE
1001 % 左カラムのテキスト、上下のカラム幅フロート、上下の段抜きフロートの高さの
1002 % 合計を|\@fixht|に格納する。
1003 %\else
1004 % Store the total height of left column text, upper and lower column width float,
1005 % upper and lower double column float height in |\@fixht|.
1006 %\fi
1007 % \begin{macrocode}
1008 \@fixht\ht\@leftcolumn \advance\@fixht\dp\@leftcolumn
1009 \@chkdblfloatht \@tempdima\@floatht
1010 \L@chkfloatht \advance\@tempdima\@floatht
1011 \advance\@fixht\@tempdima
1012 % \end{macrocode}
1013 %\ifJAPANESE
1014 % |\@fixht|の高さが|\textheight|よりも大きい場合、テキストを分割し、入らない
1015 % 部分を右カラムに移す。
1016 %\else
1017 % If |\@fixht| is greater than |\textheight|, split the text and
1018 % transfer the remaining to the right column.
1019 %\fi
1020 % \begin{macrocode}
1021 \ifdim\@fixht>\textheight
1022 % \end{macrocode}
1023 %\ifJAPANESE
1024 % 左カラムに残す部分の高さを|\@fixht|に格納する。
1025 %\else
1026 % Stores the height of the part left in the left column in |\@fixht|.
1027 %\fi
1028 % \begin{macrocode}
1029 \@fixht\textheight
1030 \advance\@fixht-\@tempdima
1031 \advance\@fixht\maxdepth
1032 % \end{macrocode}
1033 %\ifJAPANESE
1034 % |\@fixht|分のテキストをボックス0に格納する。
1035 %\else
1036 % Store the text of height |\@fixht| in box 0.
1037 %\fi
1038 % \begin{macrocode}
1039 \vbadness=\@M \splittopskip=\topskip \splitmaxdepth=\maxdepth
1040 \setbox\z@=\vsplit\@leftcolumn to\@fixht
1041 % \end{macrocode}
1042 %\ifJAPANESE
1043 % 移動する部分は|\@leftcolumn|に残っているので、
1044 % それを右カラム(|\@outputbox|)に入れる。
1045 % また、ボックス0の内容を左カラムに戻す。
1046 % \changes{v2.4}{2001/02/19}{行間が揃わない部分を修正}
1047 % \changes{v2.4}{2001/02/19}{柱が出ないのを修正}
1048 % \changes{v2.8}{2017/05/01}{\cs{@outputbox}を作るときの
1049 % \texttt{to \cs{@fixht}}の高さ指定をやめた}
1050 %\else
1051 % Since the part to be moved remains in |\@leftcolumn|,
1052 % place it in the right column (|\@outputput|).
1053 % Also, return the contents of box 0 to the left column.
1054 %\fi
1055 % \begin{macrocode}
1056 \advance\@fixht-\maxdepth
1057 \@tempdima\baselineskip \advance\@tempdima-\topskip
1058 \setbox\@outputbox=\vbox{%
1059 \ifvoid\@leftcolumn
1060 \else
1061 \unvbox\@leftcolumn\vskip\@tempdima
1062 \fi\relax
1063 \unvbox\@outputbox}% \vss moved from here
1064 % \end{macrocode}0
1065 %\ifJAPANESE
1066 % \changes{v2.5}{2001/09/14}{\cs{vsplit}時、infiniteエラーになるのを修正}
1067 % |\@leftcolumn|を作成するときに用いていた|\vss|が
1068 %
1069 % The |\vss| used to create |\@leftcolumn|
1070 %\begin{verbatim}
1071 % ! Infinite glue shrinkage found in box being split.
1072 %\end{verbatim}
1073 % のエラーを起こすことがあるので削除した。
1074 %
1075 % \emph{日本語\TeX{}開発コミュニティによる修正}:
1076 % この場所のすぐ上にあるコードの|\unvbox\@outputbox|の直後にあった|vss|を
1077 % こちらに持ってきました。
1078 % \changes{v2.8}{2017/05/01}{\cs{vss}の位置を移動}
1079 %\else
1080 % \emph{Modified by the Japanese \TeX{} development community}:
1081 % the |\vss| that was immediately after |\unvbox\@outputbox|
1082 % of the code immediately above this location was moved here.
1083 %\fi
1084 % \begin{macrocode}
1085 \setbox\@leftcolumn=\vbox to\@fixht{\unvbox\z@\vss}% to here (2017/05/01)
1086 \fi
1087 % \end{macrocode}
1088 %\ifJAPANESE
1089 % 左カラムのテキストサイズに左カラムに入るフロートの高さを加えることで、
1090 % 左カラムの高さを|\@fixht|に格納します。
1091 %\else
1092 % Stores the height of the left column in |\@fixht|,
1093 % by adding the height of the float that enters the left column to
1094 % the text height of the left column.
1095 %\fi
1096 % \begin{macrocode}
1097 \@fixht\ht\@leftcolumn
1098 \advance\@fixht\dp\@leftcolumn \advance\@fixht\@floatht
1099 % \end{macrocode}
1100 %\ifJAPANESE
1101 % \emph{日本語\TeX{}開発コミュニティによる追加}:
1102 % 右カラムについても同様に処理します。これで、古くからあった
1103 % 右カラムとフロートが重なるバグを解消しました。
1104 % \changes{v2.8}{2017/05/01}{右カラム用の処理を丸ごと追加}
1105 %\else
1106 % \emph {Added by the Japanese \TeX\ development community}:
1107 % Process the right column as well.
1108 % Fixed a longstanding bug where the right column overlapped with the float.
1109 %\fi
1110 % \begin{macrocode}
1111 \@rightfixht\ht\@outputbox \advance\@rightfixht\dp\@outputbox
1112 \@chkdblfloatht \@tempdima\@floatht
1113 \R@chkfloatht \advance\@tempdima\@floatht
1114 \advance\@rightfixht\@tempdima
1115 \ifdim\@rightfixht>\textheight
1116 \@rightfixht\textheight
1117 \advance\@rightfixht-\@tempdima
1118 \advance\@rightfixht\maxdepth
1119 \vbadness=\@M \splittopskip=\topskip \splitmaxdepth=\maxdepth
1120 \setbox\z@=\vsplit\@outputbox to\@rightfixht
1121 \advance\@rightfixht-\maxdepth
1122 \unvbox\@outputbox
1123 \setbox\@outputbox=\vbox to\@rightfixht{\unvbox\z@\vss}%
1124 \fi
1125 \@rightfixht\ht\@outputbox
1126 \advance\@rightfixht\dp\@outputbox \advance\@rightfixht\@floatht
1127 % \end{macrocode}
1128 %\ifJAPANESE
1129 % 左右、それぞれテキストとカラム幅フロートを組み立てる。
1130 %\else
1131 % Assemble text and column width floats, for left and right respectively.
1132 %\fi
1133 % \begin{macrocode}
1134 \ifx\L@toplist\@empty\else\L@cflt\fi
1135 \ifx\L@botlist\@empty\else\L@cflb\fi
1136 \ifx\R@toplist\@empty\else\R@cflt\fi
1137 \ifx\R@botlist\@empty\else\R@cflb\fi
1138 \fi
1139 % \end{macrocode}
1140 %\ifJAPANESE
1141 % 二段組でないときは従来どおりの動作をする。
1142 %\else
1143 % When it is not a two-column float, it operates as usual.
1144 %\fi
1145 % \begin{macrocode}
1146 \else
1147 \ifx\@toplist\@empty\else\@cflt\fi
1148 \ifx\@botlist\@empty\else\@cflb\fi
1149 \fi
1150 }
1151 % \end{macrocode}
1152 % \end{macro}
1153 %
1154 % \begin{macro}{\L@cflt}
1155 % \begin{macro}{\L@cflb}
1156 % \begin{macro}{\R@cflt}
1157 % \begin{macro}{\R@cflb}
1158 %\ifJAPANESE
1159 % 左カラムと右カラムを組み立てるのに用いる。
1160 %
1161 % \emph{日本語\TeX{}開発コミュニティによる追加}:
1162 % 左カラムでは|\@fixht|、右カラムでは|\@rightfixht|の高さになるように
1163 % します。また、|\@colht|をこれらの高さに更新します。
1164 % \changes{v2.3}{2000/12/20}{\cs{gdef}を\cs{global}\cs{let}に変更}
1165 % \changes{v2.8}{2017/05/01}{右カラムでは\cs{@rightfixht}の高さで
1166 % 組み立て、\cs{@colht}も更新するようにした}
1167 %\else
1168 % Used to assemble left and right columns.
1169 %
1170 % \emph {Added by the Japanese \TeX\ development community}:
1171 % Update the height of |\@fixht| in the left column,
1172 % |\@rightfixht| in the right column.
1173 % Also update |\@colht| to these heights.
1174 %\fi
1175 % \begin{macrocode}
1176 \def\L@cflt{%
1177 \let\@elt\@comflelt\setbox\@tempboxa\vbox{}\L@toplist
1178 \setbox\@leftcolumn\vbox to\@fixht{\boxmaxdepth\maxdepth
1179 \unvbox\@tempboxa
1180 \vskip-\floatsep\topfigrule\vskip\textfloatsep\unvbox\@leftcolumn
1181 \vss}%
1182 \let\@elt\relax
1183 \xdef\@freelist{\@freelist\L@toplist}\global\let\L@toplist\@empty
1184 \@colht\@fixht
1185 }
1186 \def\L@cflb{%
1187 \let\@elt\@comflelt\setbox\@tempboxa\vbox{}\L@botlist
1188 \setbox\@leftcolumn\vbox to\@fixht{\boxmaxdepth\maxdepth
1189 \unvbox\@leftcolumn
1190 \vskip\textfloatsep\botfigrule\unvbox\@tempboxa\vskip-\floatsep
1191 \vss}%
1192 \let\@elt\relax
1193 \xdef\@freelist{\@freelist\L@botlist}\global\let\L@botlist\@empty
1194 \@colht\@fixht
1195 }
1196 \def\R@cflt{%
1197 \let\@elt\@comflelt\setbox\@tempboxa\vbox{}\R@toplist
1198 \setbox\@outputbox\vbox to\@rightfixht{\boxmaxdepth\maxdepth
1199 \unvbox\@tempboxa
1200 \vskip-\floatsep\topfigrule\vskip\textfloatsep\unvbox\@outputbox
1201 \vss}%
1202 \let\@elt\relax
1203 \xdef\@freelist{\@freelist\R@toplist}\global\let\R@toplist\@empty
1204 \@colht\@rightfixht
1205 }
1206 \def\R@cflb{%
1207 \let\@elt\@comflelt\setbox\@tempboxa\vbox{}\R@botlist
1208 \setbox\@outputbox\vbox to\@rightfixht{\boxmaxdepth\maxdepth
1209 \unvbox\@outputbox
1210 \vskip\textfloatsep\botfigrule\unvbox\@tempboxa\vskip-\floatsep
1211 \vss}%
1212 \let\@elt\relax
1213 \xdef\@freelist{\@freelist\R@botlist}\global\let\R@botlist\@empty
1214 \@colht\@rightfixht
1215 }
1216 % \end{macrocode}
1217 % \end{macro}
1218 % \end{macro}
1219 % \end{macro}
1220 % \end{macro}
1221 %
1222 % \begin{macro}{\@combinedblfloats}
1223 %\ifJAPANESE
1224 % テキストと段抜きフロートをマージする。このパッケージでは、ページ下部の
1225 % 段抜きフロートもマージするように拡張している。
1226 %\else
1227 % Merge text and float.
1228 % In this package, double column float at the bottom of the page are also merged.
1229 %\fi
1230 % \begin{macrocode}
1231 %\def\@comdblflelt#1{\setbox\@tempboxa
1232 % \vbox{\unvbox\@tempboxa\box#1\vskip\dblfloatsep}}
1233 %
1234 \def\@combinedblfloats{%
1235 \ifx\@dbltoplist\@empty
1236 \else
1237 \let\@elt\@comdblflelt\setbox\@tempboxa\vbox{}\@dbltoplist
1238 \setbox\@outputbox\vbox{\boxmaxdepth\maxdepth
1239 \unvbox\@tempboxa
1240 \vskip-\dblfloatsep
1241 \dblfigrule
1242 \vskip\dbltextfloatsep
1243 \box\@outputbox}%
1244 \let\@elt\relax\xdef\@freelist{\@freelist\@dbltoplist}%
1245 \global\let\@dbltoplist\@empty
1246 \fi
1247 \ifx\@dblbotlist\@empty
1248 \else
1249 \let\@elt\@comdblflelt\setbox\@tempboxa\vbox{}\@dblbotlist
1250 \setbox\@outputbox\vbox{\boxmaxdepth\maxdepth
1251 \box\@outputbox
1252 \vskip\dbltextfloatsep
1253 \dblfigrule
1254 \unvbox\@tempboxa
1255 \vskip-\dblfloatsep
1256 }%
1257 \let\@elt\relax\xdef\@freelist{\@freelist\@dblbotlist}%
1258 \global\let\@dblbotlist\@empty
1259 \fi
1260 \global\setbox\@outputbox\vbox to\textheight{\unvbox\@outputbox}%
1261 }
1262 % \end{macrocode}
1263 % \end{macro}
1264 %
1265 %\ifJAPANESE
1266 % \subsection{二段組の出力}
1267 %\else
1268 % \subsection{Output of two columns}
1269 %\fi
1270 %
1271 % \begin{macro}{\if@balance}
1272 %\ifJAPANESE
1273 % 左右のカラムを均等にして出力するかどうかを示すフラグ。
1274 %\else
1275 % Flag indicating whether the left and right columns are to be balanced.
1276 %\fi
1277 % \begin{macrocode}
1278 \newif\if@balance \@balancefalse
1279 % \end{macrocode}
1280 % \end{macro}
1281 %
1282 % \begin{macro}{\@outputdblcol}
1283 %\ifJAPANESE
1284 % 左右のカラムを連結し、出力するのは|\@outputdblcol|が行なう。
1285 % このパッケージでは、左右のカラムを均等に分割するためのルーチンを加えてある。
1286 %\else
1287 % Concatenate left and right columns and output them by |\@outputdblcol|.
1288 % In this package, a routine for equally dividing the left and right
1289 % columns has been added.
1290 %\fi
1291 % \begin{macrocode}
1292 \newbox\@combinebox
1293 % \end{macrocode}
1294 %\ifJAPANESE
1295 % 左カラムを組み立てただけの時点では、それを|\@leftcolumn|に格納するだけで
1296 % 出力はしない。
1297 % \changes{v2.4}{2001/02/19}{最終ページで左右の行間が揃わない部分を修正}
1298 % \changes{v2.4}{2001/02/19}{柱が出ないのを修正}
1299 %\else
1300 % Just store the assembled left column in |\@leftcolumn|,
1301 % do not output it yet.
1302 %\fi
1303 % \begin{macrocode}
1304 \def\@outputdblcol{%
1305 \if@firstcolumn
1306 \global\@firstcolumnfalse
1307 \global\setbox\@leftcolumn\box\@outputbox
1308 \@colht\textheight
1309 \@chkdblfloatht\global\advance\@colht-\@floatht
1310 \else
1311 \global\@firstcolumntrue
1312 % \end{macrocode}
1313 %\ifJAPANESE
1314 % ここからが左右カラムを均等に分割するコード。
1315 %\else
1316 % Here starts the code that balances the left and right columns.
1317 %\fi
1318 % \begin{macrocode}
1319 \if@balance
1320 \@tempdima\baselineskip
1321 \advance\@tempdima-\topskip
1322 \setbox\@combinebox=\vbox{%
1323 \unvbox\@leftcolumn\vskip\@tempdima\unvbox\@outputbox}%
1324 \@tempdima\ht\@combinebox
1325 \advance\@tempdima\dp\@combinebox
1326 \divide\@tempdima\tw@
1327 \vbadness=\@M \splittopskip=\topskip \splitmaxdepth=\maxdepth
1328 \setbox\@leftcolumn=\vsplit\@combinebox to\@tempdima
1329 \setbox\@outputbox=\vtop{\unvbox\@combinebox}
1330 \setbox\@leftcolumn=\vtop{\unvbox\@leftcolumn}
1331 \fi
1332 % \end{macrocode}
1333 %\ifJAPANESE
1334 % 整形する。
1335 %\else
1336 % Format it.
1337 %\fi
1338 % \begin{macrocode}
1339 \@tempdima\ht\@leftcolumn
1340 \setbox\@outputbox\vbox to\@tempdima{%
1341 \hb@xt@\textwidth{%
1342 \hb@xt@\columnwidth{%
1343 \vbox to\@tempdima{\box\@leftcolumn\vss}\hss}%
1344 \hfil
1345 \vrule width\columnseprule
1346 \hfil
1347 \hb@xt@\columnwidth{%
1348 \vbox to\@tempdima{\box\@outputbox\vss}\hss}%
1349 }%
1350 \vss
1351 }%
1352 \@combinedblfloats
1353 \@outputpage
1354 \begingroup
1355 \@dblfloatplacement
1356 \@startdblcolumn
1357 \@whilesw\if@fcolmade \fi{\@outputpage\@startdblcolumn}%
1358 \endgroup
1359 \fi
1360 \global\@balancefalse
1361 }
1362 % \end{macrocode}
1363 % \end{macro}
1364 %
1365 % \begin{macro}{\@startdblcolumn}
1366 %\ifJAPANESE
1367 % 二段組を開始するとき、まだ出力をしていないフロートを出力する。
1368 % それらは|\@sdblcolelt|を通じて、|\@addtonextcol|で出力される。
1369 % このパッケージでは、カラムの高さを|\textheight|からフロートの高さを
1370 % 引いたものに設定するように再定義する。
1371 %\else
1372 % When starting a two-column page, output a float that has not yet been output.
1373 % They are output by |\@addtonextcol| via |\@sdblcolelt|.
1374 % In this package, update the height of the column
1375 % by subtracting the height of the float from |\textheight|.
1376 %\fi
1377 % \begin{macrocode}
1378 \def\@startdblcolumn{%
1379 \global\@colht\textheight
1380 \@tryfcolumn\@dbldeferlist
1381 \if@fcolmade
1382 \else
1383 \begingroup
1384 \let\reserved@b\@dbldeferlist
1385 \global\let\@dbldeferlist\@empty
1386 \let\@elt\@sdblcolelt
1387 \reserved@b
1388 \endgroup
1389 \fi
1390 \@chkdblfloatht
1391 \global\advance\@colht-\@floatht
1392 }
1393 % \end{macrocode}
1394 % \end{macro}
1395 %
1396 % \begin{macro}{\@doclearpage}
1397 %\ifJAPANESE
1398 % 出力フロート用リストの初期化をするために、|\@doclearpage|を再定義する。
1399 %\else
1400 % Redefine |\@doclearpage| to initialize output float list.
1401 %\fi
1402 % \begin{macrocode}
1403 \def\@doclearpage{%
1404 \ifvoid\footins
1405 \setbox\@tempboxa\vsplit\@cclv to\z@ \unvbox\@tempboxa
1406 \setbox\@tempboxa\box\@cclv
1407 \xdef\@deferlist{%
1408 \L@toplist\R@toplist\L@botlist\R@botlist\@deferlist}%
1409 \global\let\L@toplist\@empty % changed from \@toplist
1410 \global\let\R@toplist\@empty % added
1411 \global\let\L@botlist\@empty % changed from \@botlist
1412 \global\let\R@botlist\@empty % added
1413 \global\@colroom\@colht
1414 \ifx\@currlist\@empty
1415 \else
1416 \@latexerr{Float(s) lost}\@ehb
1417 \global\let\@currlist\@empty
1418 \fi
1419 \@makefcolumn\@deferlist
1420 \@whilesw\if@fcolmade \fi{\@opcol\@makefcolumn\@deferlist}%
1421 \if@twocolumn
1422 \if@firstcolumn
1423 % added \@dblbotlist
1424 \xdef\@dbldeferlist{\@dbltoplist\@dblbotlist\@dbldeferlist}%
1425 \global\let\@dbltoplist\@empty
1426 \global\let\@dblbotlist\@empty % added
1427 \global\@colht\textheight
1428 \begingroup
1429 \@dblfloatplacement
1430 \@makefcolumn\@dbldeferlist
1431 \@whilesw\if@fcolmade \fi{\@outputpage
1432 \@makefcolumn\@dbldeferlist}%
1433 \endgroup
1434 \else
1435 \vbox{}\clearpage
1436 \fi
1437 \fi
1438 \else
1439 \setbox\@cclv\vbox{\box\@cclv\vfil}%
1440 \@makecol\@opcol
1441 \clearpage
1442 \fi
1443 }
1444 % \end{macrocode}
1445 % \end{macro}
1446 %
1447 % \begin{macro}{\@topnewpage}
1448 %\ifJAPANESE
1449 % |\@dblbotroom|と|dblbotnumber|を初期化するために|\@topnewpage|を再定義する。
1450 %\else
1451 % Redefine |\@topnewpage| to initialize |\@dblbotroom| and |dblbotnumber|.
1452 %\fi
1453 % \begin{macrocode}
1454 \long\def\@topnewpage[#1]{%
1455 %\@nodocument
1456 \@next\@currbox\@freelist{}{}%
1457 \global\setbox\@currbox
1458 \color@vbox
1459 \normalcolor
1460 \vbox{\hsize\textwidth
1461 \@parboxrestore
1462 \col@number\@ne
1463 #1%
1464 \vskip-\dbltextfloatsep}%
1465 \color@endbox
1466 \ifdim\ht\@currbox>\textheight
1467 \ht\@currbox\textheight
1468 \fi
1469 \global\count\@currbox\tw@
1470 \@tempdima-\ht\@currbox
1471 \advance\@tempdima-\dbltextfloatsep
1472 \global\advance\@colht\@tempdima
1473 \ifx\@dbltoplist\@empty
1474 \else
1475 \@latexerr{Float(s) lost}\@ehb
1476 \let\@dbltoplist\@empty
1477 \fi
1478 \@cons\@dbltoplist\@currbox
1479 \global\@dbltopnum\m@ne
1480 \global\@dblbotnum\m@ne % added
1481 \ifdim\@colht<2.5\baselineskip
1482 \@latex@warning@no@line {Optional argument of \noexpand\twocolumn
1483 too tall on page \thepage}%
1484 \@emptycol
1485 \if@firstcolumn
1486 \else
1487 \@emptycol
1488 \fi
1489 \else
1490 \global\vsize\@colht
1491 \global\@colroom\@colht
1492 \@floatplacement
1493 \fi
1494 %\global\@dbltoproom\maxdimen
1495 %\global\@dblbotroom\maxdimen
1496 %\@addtodblcol
1497 }
1498 % \end{macrocode}
1499 % \end{macro}
1500 %
1501 % \begin{macro}{\balancenewpage}
1502 % \begin{macro}{\balanceclearpage}
1503 %\ifJAPANESE
1504 % テキストを均等に分割して出力するためのマクロ。
1505 % ただし、このマクロを用いた場合、そのページ内での|\newpage|や
1506 % |\clearpage|コマンドが無効になることに注意。
1507 %\else
1508 % Macro for evenly dividing text and outputting it.
1509 % However, when using this macro, |\newpage| or |\clearpage|
1510 % are not allowed on the current page.
1511 %\fi
1512 % \begin{macrocode}
1513 \def\balancenewpage{\par\vfil\global\@balancetrue\penalty-\@M}
1514 \def\balanceclearpage{\balancenewpage
1515 \write\m@ne{}\vbox{}\global\@balancetrue\penalty-\@Mi}
1516 \endinput
1517 %</core>
1518 % \end{macrocode}
1519 % \end{macro}
1520 % \end{macro}
1521 %
1522 % \Finale
1523 %
1524 % \endinput