| 1 |
% \iffalse |
| 2 |
%<newvbtm>%% Style file `newvbtm'. |
| 3 |
%<varvbtm>%% Style file `varvbtm'. |
| 4 |
%% Copyright (C) 1999-2002 Hiroshi Nakashima <[email protected]> |
| 5 |
%% (Toyohashi Univ. of Tech.) |
| 6 |
%% |
| 7 |
%% This program can be redistributed and/or modified under the terms |
| 8 |
%% of the LaTeX Project Public License distributed from CTAN |
| 9 |
%% archives in directory macros/latex/base/lppl.txt; either |
| 10 |
%% version 1 of the License, or any later version. |
| 11 |
%% |
| 12 |
% \fi |
| 13 |
% |
| 14 |
% \CheckSum{578} |
| 15 |
%% \CharacterTable |
| 16 |
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 17 |
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 18 |
%% Digits \0\1\2\3\4\5\6\7\8\9 |
| 19 |
%% Exclamation \! Double quote \" Hash (number) \# |
| 20 |
%% Dollar \$ Percent \% Ampersand \& |
| 21 |
%% Acute accent \' Left paren \( Right paren \) |
| 22 |
%% Asterisk \* Plus \+ Comma \, |
| 23 |
%% Minus \- Point \. Solidus \/ |
| 24 |
%% Colon \: Semicolon \; Less than \< |
| 25 |
%% Equals \= Greater than \> Question mark \? |
| 26 |
%% Commercial at \@ Left bracket \[ Backslash \\ |
| 27 |
%% Right bracket \] Circumflex \^ Underscore \_ |
| 28 |
%% Grave accent \` Left brace \{ Vertical bar \| |
| 29 |
%% Right brace \} Tilde \~} |
| 30 |
%% |
| 31 |
% \iffalse |
| 32 |
%% |
| 33 |
%<*dtx> |
| 34 |
\ProvidesFile{newvbtm.dtx} |
| 35 |
%</dtx> |
| 36 |
%<newvbtm|varvbtm>\newif\ifnvb@LaTeXe |
| 37 |
%<newvbtm|varvbtm>\def\next{LaTeX2e} |
| 38 |
%<newvbtm|varvbtm>\ifx\fmtname\next \nvb@LaTeXetrue |
| 39 |
%<newvbtm|varvbtm>\def\next{ |
| 40 |
%<newvbtm|varvbtm>\NeedsTeXFormat{LaTeX2e}[1994/12/01] |
| 41 |
%<newvbtm>\ProvidesPackage{newvbtm}} |
| 42 |
%<varvbtm>\ProvidesPackage{varvbtm}} |
| 43 |
%<newvbtm|varvbtm>\else \nvb@LaTeXefalse |
| 44 |
%<newvbtm|varvbtm>\def\next[#1]{}\fi |
| 45 |
%<newvbtm|varvbtm>\next |
| 46 |
%<driver>\ProvidesFile{newvbtm-man.tex} |
| 47 |
% \fi |
| 48 |
% \ProvidesFile{newvbtm.dtx} |
| 49 |
[2002/04/08 v1.1 ] |
| 50 |
% \iffalse |
| 51 |
%<*driver> |
| 52 |
\documentclass{ltxdoc} |
| 53 |
\usepackage{varvbtm} |
| 54 |
\DisableCrossrefs |
| 55 |
\PageIndex |
| 56 |
\CodelineNumbered |
| 57 |
\RecordChanges |
| 58 |
%</driver> |
| 59 |
%<driver>\OnlyDescription |
| 60 |
%<driver>\def\ONLYDESCRIPTION{} |
| 61 |
%<*driver> |
| 62 |
\advance\textwidth4em |
| 63 |
\begin{document} |
| 64 |
\DocInput{newvbtm.dtx} |
| 65 |
\end{document} |
| 66 |
%</driver> |
| 67 |
% \fi |
| 68 |
% \changes{v0.1}{1991/12/18} |
| 69 |
% {The macros for tabbing verbatim etc. has already been born.} |
| 70 |
% \changes{v0.2}{1992/03/26} |
| 71 |
% {The style defverbatim is born.} |
| 72 |
% \changes{v0.3}{1992/10/27} |
| 73 |
% {The style newverbatim has already been born.} |
| 74 |
% \changes{v1.0}{1999/07/14} |
| 75 |
% {The Style and macros are merged into newvbtm.dtx and rewritten.} |
| 76 |
% \changes{v1.1}{2002/04/08} |
| 77 |
% {The following are to fix the bug revealed in LaTeX-2.09.} |
| 78 |
% |
| 79 |
% \errorcontextlines10000 |
| 80 |
% \GetFileInfo{newvbtm.dtx} |
| 81 |
% \setcounter{IndexColumns}{2} |
| 82 |
% |
| 83 |
% \def\bottomfraction{.9} |
| 84 |
% \def\cs#1{\hbox{\tt\char\escapechar#1}} |
| 85 |
% \def\Item{\vskip-\itemsep\vskip-\parsep\vskip0pt\item} |
| 86 |
% |
| 87 |
% \makeatletter |
| 88 |
% \def\nosv{\catcode`\|12} |
| 89 |
% |
| 90 |
% \def\eqnarray{\stepcounter{equation}\let\@currentlabel=\theequation |
| 91 |
% \global\@eqnswtrue |
| 92 |
% \global\@eqcnt\z@\tabskip\@centering\let\\=\@eqncr |
| 93 |
% $$\halign to \displaywidth\bgroup\hskip\@centering |
| 94 |
% $\displaystyle\tabskip\z@{##}$\@eqnsel&\global\@eqcnt\@ne |
| 95 |
% \hfil$\;{##}\;$\hfil |
| 96 |
% &\global\@eqcnt\tw@ $\displaystyle\tabskip\z@{##}$\hfil |
| 97 |
% \tabskip\@centering&\llap{##}\tabskip\z@\cr} |
| 98 |
% |
| 99 |
% \def\Meta#1{\penalty\@highpenalty |
| 100 |
% \hbox{{\tt\char`\{}{\it\meta{#1}}{\tt\char`\}}}} |
| 101 |
% \def\opt#1{{\tt[}{\it\meta{#1}}{\tt]}} |
| 102 |
% \def\optn#1{{\tt[#1]}} |
| 103 |
% \def\arg#1{{\tt\char`\{#1\char`\}}} |
| 104 |
% |
| 105 |
% \let\latex@addmarginpar\@addmarginpar |
| 106 |
% \let\latex@latex@warning@no@line\@latex@warning@no@line |
| 107 |
% \def\@addmarginpar{\let\@latex@warning@no@line\@gobble |
| 108 |
% \latex@addmarginpar |
| 109 |
% \let\@latex@warning@no@line\latex@latex@warning@no@line} |
| 110 |
% \let\@font@warning\@gobble |
| 111 |
% |
| 112 |
% \long\def\m@cro@#1#2{\endgroup \topsep\MacroTopsep \trivlist |
| 113 |
% \edef\saved@macroname{\string#2} |
| 114 |
% \def\makelabel##1{\llap{##1\hskip\@totalleftmargin}} |
| 115 |
% \if@inlabel |
| 116 |
% \let\@tempa\@empty \count@\macro@cnt |
| 117 |
% \loop \ifnum\count@>\z@ |
| 118 |
% \edef\@tempa{\@tempa\hbox{\strut}}\advance\count@\m@ne \repeat |
| 119 |
% \edef\makelabel##1{\llap{\vtop to\baselineskip |
| 120 |
% {\@tempa\hbox{##1}\vss} |
| 121 |
% \hskip\@totalleftmargin}} |
| 122 |
% \advance \macro@cnt \@ne |
| 123 |
% \else \macro@cnt\@ne \fi |
| 124 |
% \edef\@tempa{\noexpand\item[ |
| 125 |
% #1 |
| 126 |
% \noexpand\PrintMacroName |
| 127 |
% \else |
| 128 |
% \noexpand\PrintEnvName |
| 129 |
% \fi |
| 130 |
% {\string#2}]} |
| 131 |
% \@tempa |
| 132 |
% \global\advance\c@CodelineNo\@ne |
| 133 |
% #1 |
| 134 |
% \SpecialMainIndex{#2}\nobreak |
| 135 |
% \DoNotIndex{#2} |
| 136 |
% \else |
| 137 |
% \SpecialMainEnvIndex{#2}\nobreak |
| 138 |
% \fi |
| 139 |
% \global\advance\c@CodelineNo\m@ne |
| 140 |
% \ignorespaces} |
| 141 |
% |
| 142 |
% \def\dummymacro{\topsep\MacroTopsep \trivlist \item[]} |
| 143 |
% \let\enddummymacro\endtrivlist |
| 144 |
% |
| 145 |
% \def\DescribeOpt{\leavevmode\@bsphack\begingroup\MakePrivateLetters |
| 146 |
% \Describe@Opt} |
| 147 |
% \def\Describe@Opt#1{\endgroup \Describe@pt{#1}} |
| 148 |
% \def\Describe@pt#1#2{ |
| 149 |
% \marginpar{\raggedleft\PrintDescribeMacro{#1}} |
| 150 |
% \SpecialOptUsageIndex{#1}{#2}} |
| 151 |
% \def\SpecialOptUsageIndex#1#2{ |
| 152 |
% \index{#1\actualchar{\protect\ttfamily#1} (#2)\encapchar usage} |
| 153 |
% \index{#2s:\levelchar{\protect\ttfamily#1}\encapchar usage} |
| 154 |
% \@esphack\ignorespaces} |
| 155 |
% \def\SpecialOptMainIndex#1#2{ |
| 156 |
% \index{#1\actualchar{\protect\ttfamily#1} (#2)\encapchar main} |
| 157 |
% \index{#2s:\levelchar{\protect\ttfamily#1}\encapchar main} |
| 158 |
% \@esphack\ignorespaces} |
| 159 |
% \def\SpecialOptIndex#1#2{ |
| 160 |
% \index{#1\actualchar{\protect\ttfamily#1} (#2)} |
| 161 |
% \index{#2s:\levelchar{\protect\ttfamily#1}} |
| 162 |
% \@esphack\ignorespaces} |
| 163 |
% \def\SpecialOptIndexS#1#2{ |
| 164 |
% \index{#1\actualchar{\protect\ttfamily#1} (#2)} |
| 165 |
% \index{#2es:\levelchar{\protect\ttfamily#1}} |
| 166 |
% \@esphack\ignorespaces} |
| 167 |
% |
| 168 |
% \begingroup |
| 169 |
% \gdef\@sverbcat{\catcode`\@\active\catcode`\#\active} |
| 170 |
% \catcode`\@\active \gdef@{\char`\@\penalty\exhyphenpenalty} |
| 171 |
% \catcode`\#\active \gdef#{\penalty\exhyphenpenalty} |
| 172 |
% \endgroup |
| 173 |
% \let\latex@sverb\@sverb |
| 174 |
% \def\@sverb{\@sverbcat\latex@sverb} |
| 175 |
% |
| 176 |
% \def\theglossary{\onecolumn \glossary@prologue |
| 177 |
% \GlossaryParms \let\item\@idxitem \ignorespaces} |
| 178 |
% \def\endtheglossary{\relax} |
| 179 |
% |
| 180 |
% |
| 181 |
% |
| 182 |
% \def\bracepair{`{\tt\char`\{\char`\}'}} |
| 183 |
% |
| 184 |
% \ifx\ONLYDESCRIPTION\undefined\else |
| 185 |
% \let\SpecialUsageIndex\SpecialMainIndex |
| 186 |
% \let\SpecialOptUsageIndex\SpecialOptMainIndex |
| 187 |
% \fi |
| 188 |
% \newverbatim{iverbatim}{\begin{itemize}\item[]\ttfamily}{}{}{\end{itemize}} |
| 189 |
% |
| 190 |
% |
| 191 |
% |
| 192 |
% \title{\textsf{newvbtm} and \textsf{varvbtm}\\ |
| 193 |
% Packages for Variants of \texttt{verbatim} Environment\thanks{ |
| 194 |
% This file has version number \fileversion, last revised \filedate.}} |
| 195 |
% \author{Hiroshi Nakashima\\(Toyohashi Univ. of Tech.)} |
| 196 |
% \date{\filedate} |
| 197 |
% \maketitle |
| 198 |
% |
| 199 |
% \begin{abstract} |
| 200 |
% This file provides two style files; \textsf{newvbtm} to define |
| 201 |
% |verbatim|-like environments; \textsf{varvbtm} to provide set of macros |
| 202 |
% for variants of |verbatim|, e.g.\ in which \texttt{\char`\^I} acts as a tab. |
| 203 |
% \end{abstract} |
| 204 |
% |
| 205 |
% \tableofcontents |
| 206 |
% \newpage |
| 207 |
% |
| 208 |
% |
| 209 |
% |
| 210 |
% \section{Introduction} |
| 211 |
% \label{sec:intro} |
| 212 |
% |
| 213 |
% \SpecialOptIndex{verbatim}{environment} |
| 214 |
% \LaTeX{} users often have trouble when they wish to have their own |
| 215 |
% customized |verbatim|-like environment. Probably you once wished to have |
| 216 |
% an indented-footnotesize-|verbatim| instead of always typing; |
| 217 |
% |
| 218 |
%\begin{iverbatim} |
| 219 |
%\begin{itemize}\item[]\footnotesize |
| 220 |
%\begin{verbatim} |
| 221 |
%... |
| 222 |
%\end{verbatim} |
| 223 |
%\end{itemize} |
| 224 |
%\end{iverbatim} |
| 225 |
% |
| 226 |
% and tried the following just to know it does not work. |
| 227 |
% |
| 228 |
%\begin{iverbatim} |
| 229 |
%\newenvironment{myverbatim}{\begin{itemize}\item[]\footnotesize |
| 230 |
% \begin{verbatim}}% |
| 231 |
% {\end{verbatim}\end{itemize}} |
| 232 |
%\end{iverbatim} |
| 233 |
% |
| 234 |
% Another trouble you probablly have had is that what you see in |verbatim| |
| 235 |
% text with |<TAB>| is not what you get because |<TAB>| does not acts as an |
| 236 |
% tab but a space. |
| 237 |
% |
| 238 |
% Of course it is possible to define your own |verbatim|-like environments |
| 239 |
% if you have enough knowledge of the implementation of |verbatim| including |
| 240 |
% dirty tricks with |\catcode|. However, even a \TeX{}pert should be bored |
| 241 |
% with typing a dirty code like; |
| 242 |
% |
| 243 |
%\begin{iverbatim} |
| 244 |
%\begingroup \catcode`\|=0 \catcode`\[=1 \catcode`\]=2 |
| 245 |
%\catcode`\{=12 \catcode`\}=12 \catcode`\\=12 |
| 246 |
%|long|def|@myxverbatim##1\end{myverbatim}[##1|end[myverbatim]] |
| 247 |
%|endgroup |
| 248 |
%\end{iverbatim} |
| 249 |
% |
| 250 |
% \DescribeOpt{newvbtm}{style file} |
| 251 |
% \DescribeOpt{varvbtm}{style file} |
| 252 |
% The style files distributed with this document will solve these problems. |
| 253 |
% You will have two style files, \textsf{newvbtm.sty} and |
| 254 |
% \textsf{varvbtm.sty}, by processing \textsf{newvbtm.dtx} with |
| 255 |
% \textsf{docstrip}, or simply doing the following. |
| 256 |
% |
| 257 |
%\begin{iverbatim} |
| 258 |
%% tex newvbtm.ins |
| 259 |
%\end{iverbatim} |
| 260 |
% |
| 261 |
% The former style provides you |\(re)newverbatim| command to (re)define |
| 262 |
% your own |verbatim|-like environment easily. The latter gives you a set |
| 263 |
% of various macros for tab-emulation, page break control, etc. |
| 264 |
% |
| 265 |
% |
| 266 |
% |
| 267 |
% \section{Usage} |
| 268 |
% \label{sec:usage} |
| 269 |
% \subsection{Loading Style Files} |
| 270 |
% \label{sec:usage-load} |
| 271 |
% |
| 272 |
% Both style files are usable to both \LaTeXe{} and \LaTeX-2.09 |
| 273 |
% users with their standard package loading declaration. If you use |
| 274 |
% \LaTeXe{} and wish to load, for example, \textsf{newvbtm}, simply do the |
| 275 |
% following. |
| 276 |
% |
| 277 |
% \SpecialUsageIndex{\usepackage} |
| 278 |
%\begin{iverbatim} |
| 279 |
%\usepackage{newvbtm} |
| 280 |
%\end{iverbatim} |
| 281 |
% |
| 282 |
% If you still love \LaTeX-2.09, the following is what you have to do. |
| 283 |
% |
| 284 |
% \begin{quote} |
| 285 |
% \SpecialUsageIndex{\documentstyle} |
| 286 |
% |\documentstyle[..,newvbtm,...]|\Meta{main-style} |
| 287 |
% \end{quote} |
| 288 |
% |
| 289 |
% Note that loading \textsf{varvbtm} automatically loads \textsf{newvbtm} |
| 290 |
% too. Thus you may not load both though doing so is safe. |
| 291 |
% |
| 292 |
% |
| 293 |
% |
| 294 |
% \subsection{\textsf{newvbtm}: Define \texttt{verbatim}-like Environments} |
| 295 |
% \label{sec:usage-new} |
| 296 |
% |
| 297 |
% \SpecialOptIndex{newvbtm}{style file} |
| 298 |
% \DescribeMacro{\newverbatim} |
| 299 |
% The command; |
| 300 |
% |
| 301 |
% \begin{quote} |
| 302 |
% |\newverbatim|\Meta{env}\opt{n-args} |
| 303 |
% \Meta{beg-def-outer}\Meta{beg-def-inner}|%|\\ |
| 304 |
% \phantom{\texttt{+newverbatim}\Meta{env}\opt{n-args}} |
| 305 |
% \Meta{end-def-inner}\Meta{end-def-outer} |
| 306 |
% \end{quote} |
| 307 |
% |
| 308 |
% defines an environment named \meta{env} with \meta{n-args} arguments |
| 309 |
% (optionally), and acting conceptually as follows: |
| 310 |
% |
| 311 |
% \begin{quote} |
| 312 |
% \meta{beg-def-outer}|\begin{verbatim}|\meta{beg-def-inner}\\ |
| 313 |
% \meta{body-of-environment}\\ |
| 314 |
% \meta{end-def-inner}|\end{verbatim}|\meta{end-def-outer} |
| 315 |
% \end{quote} |
| 316 |
% |
| 317 |
% Thus to have indented-footnotesize-|verbatim| named, say |indfnsverbatim|, |
| 318 |
% you may simply do the following. |
| 319 |
% |
| 320 |
%\begin{iverbatim} |
| 321 |
%\newverbatim{indfnsverbatim}{\begin{itemize}\item[]\footnotesize}{}{}% |
| 322 |
% {\end{itemize}} |
| 323 |
%\end{iverbatim} |
| 324 |
% |
| 325 |
% Since |\newverbatim| defines not only \meta{env} but also its starred |
| 326 |
% counterpart \meta{env}\texttt{*} that acts like |verbatim*|, the |
| 327 |
% definition above also defines |indfnsverbatim*| environment. |
| 328 |
% |
| 329 |
% If you use \LaTeXe{}, you may make \meta{env} have an optional argument |
| 330 |
% whose default value is \meta{default} by; |
| 331 |
% |
| 332 |
% \begin{itemize}\item[] |
| 333 |
% |\newverbatim|\Meta{env}\opt{n-args}\opt{default} |
| 334 |
% \Meta{beg-def-outer}\Meta{beg-def-inner}|%|\\ |
| 335 |
% \phantom{\texttt{+newverbatim}\Meta{env}\opt{n-args}\opt{default}} |
| 336 |
% \Meta{end-def-inner}\Meta{end-def-outer} |
| 337 |
% \end{itemize} |
| 338 |
% |
| 339 |
% For example, our |indfnsverbatim| environment can have an optional |
| 340 |
% argument to specify a font size other than |\footnotesize| by the |
| 341 |
% following definition. |
| 342 |
% |
| 343 |
%\begin{iverbatim} |
| 344 |
%\newverbatim{indfnsverbatim}[1][\footnotesize]% |
| 345 |
% {\begin{itemize}\item[]#1}{}{}{\end{itemize}} |
| 346 |
%\end{iverbatim} |
| 347 |
% |
| 348 |
% The argument \meta{beg-def-inner} is for \TeX{}perts who wish to do |
| 349 |
% something overriding what \LaTeX's |\verbatim| does. Even if you don't |
| 350 |
% have much confidence in your \TeX{}pertise, however, you can do some |
| 351 |
% useful thing with this argument. For example, the following is obtained |
| 352 |
% by itself. |
| 353 |
% |
| 354 |
% \begin{itemize}\item[] |
| 355 |
%\newverbatim{slverbatim}{\ttfamily}{\slshape}{}{} |
| 356 |
%\begin{slverbatim} |
| 357 |
%\newverbatim{slverbatim}{}{\slshape}{}{} |
| 358 |
%\end{slverbatim} |
| 359 |
% \end{itemize} |
| 360 |
% |
| 361 |
% Also you will find a few commands for this argument in |
| 362 |
% \S\ref{sec:usage-var}. |
| 363 |
% |
| 364 |
% The needs of \meta{end-def-inner} is much more limited. One example is to |
| 365 |
% check if |\end{verbatim}| is at the beginning of a line. This examination |
| 366 |
% is done by; |
| 367 |
% |
| 368 |
% \begin{quote} |
| 369 |
% |\newverbatim{myverbatim}{...}{...}%|\\ |
| 370 |
% | {\ifvmode |\meta{at-bol}| \else |\meta{not-at-bol}| \fi}{...}| |
| 371 |
% \end{quote} |
| 372 |
% |
| 373 |
% \DescribeMacro{\renewverbatim} |
| 374 |
% You may redefine your own |verbatim|-like environment, or even |verbatim| |
| 375 |
% itself, by |\renewverbatim| whose arguments are same as those of |
| 376 |
% |\newenvironment|. |
| 377 |
% |
| 378 |
% |
| 379 |
% |
| 380 |
% \subsection{\textsf{varvbtm}: To Make Variants of \texttt{verbatim}} |
| 381 |
% \label{sec:usage-var} |
| 382 |
% |
| 383 |
% \subsubsection{Tab Emulation} |
| 384 |
% \label{sec:usage-var-tab} |
| 385 |
% |
| 386 |
% \DescribeMacro{\newtabverbatim} |
| 387 |
% \DescribeMacro{\renewtabverbatim} |
| 388 |
% The commands |\(re)newtabverbatim| is to (re)define a |verbatim|-like |
| 389 |
% environment in which |<TAB>| acts as a tab. The syntax of the command is |
| 390 |
% same as that of |\(re)newverbatim|, and its operation is equivalent to; |
| 391 |
% |
| 392 |
% \begin{itemize}\item[] |
| 393 |
% |\(re)newverbatim|\Meta{env}\opt{n-args}\opt{default}\\ |
| 394 |
% \mbox{}\qquad\qquad\Meta{beg-def-outer}|%|\\ |
| 395 |
% \mbox{}\qquad\qquad|{|\meta{beg-def-inner}\meta{beg-def-for-tab}|}%|\\ |
| 396 |
% \mbox{}\qquad\qquad|{|\meta{end-def-for-tab}\meta{end-def-inner}|}%|\\ |
| 397 |
% \mbox{}\qquad\qquad\Meta{end-def-outer} |
| 398 |
% \end{itemize} |
| 399 |
% |
| 400 |
% For example; |
| 401 |
% |
| 402 |
%\begin{iverbatim} |
| 403 |
%\newtabverbatim{tabverbatim}{}{}{}{} |
| 404 |
%\end{iverbatim} |
| 405 |
% |
| 406 |
% defines |tabverbatim| environment just to make |<TAB>| act as a tab. |
| 407 |
% Another example to have tab emulation version of |indfnsverbatim| with |
| 408 |
% optional argument, say |indfnstabverbatim| is; |
| 409 |
% |
| 410 |
%\begin{iverbatim} |
| 411 |
%\newtabverbatim{indfnstabverbatim}[1][\footnotesize]% |
| 412 |
% {\begin{itemize}\item[]#1}{}{}{\end{itemize}} |
| 413 |
%\end{iverbatim} |
| 414 |
% |
| 415 |
% Note that in the starred version, e.g. |tabverbatim*|, a |<TAB>| is |
| 416 |
% translated into a sequence of \verb*! !. |
| 417 |
% |
| 418 |
% \DescribeOpt{VVBtabwidth}{counter} |
| 419 |
% The distance between tab stops is the width of eight characters of the |
| 420 |
% font used in the environment, i.e. typewriter font usually. If you want |
| 421 |
% to change this default value, set the counter |VVBtabwidth| to the number |
| 422 |
% of characters of the distance. |
| 423 |
% |
| 424 |
% \DescribeMacro{\VVBbegintab} |
| 425 |
% \DescribeMacro{\VVBendtab} |
| 426 |
% The magical stuff for \meta{beg-def-for-tab} and \meta{end-def-for-tab} |
| 427 |
% is also accessible through commands |\VVBbegintab| and |\VVBendtab| for |
| 428 |
% \TeX{}perts who wish to do something with |\(re)newverbatim| rather than |
| 429 |
% |\(re)newtabverbatim|. |
| 430 |
% |
| 431 |
% |
| 432 |
% |
| 433 |
% \subsubsection{Form Feed Character} |
| 434 |
% \label{sec:usage-var-ff} |
| 435 |
% |
| 436 |
% \DescribeMacro{\VVBprintFF} |
| 437 |
% \DescribeMacro{\VVBprintFFas} |
| 438 |
% You might have found that |<FF>| (or |^L|) in |verbatim| caused a |
| 439 |
% mysterious error; |
| 440 |
% |
| 441 |
%\begin{iverbatim} |
| 442 |
%! Forbidden control sequence found while scanning use of \@xverbatim. |
| 443 |
%\end{iverbatim} |
| 444 |
% |
| 445 |
% This is because |<FF>| is not {\em verbatimized}. Giving the command |
| 446 |
% |\VVBprintFF| to $\langle$\textit{beg-def-}\allowbreak |
| 447 |
% \textit{outer}$\rangle$ (or \meta{beg-def-inner}) of |\newverbatim| does |
| 448 |
% it for you and makes |<FF>| printed as |^L| in default. You may change |
| 449 |
% this default print image by; |
| 450 |
% |
| 451 |
% \begin{quote} |
| 452 |
% |\VVBprintFFas|\Meta{str} |
| 453 |
% \end{quote} |
| 454 |
% where \meta{str} is a sequence of any printable characters other than |{| |
| 455 |
% and |}|. Note that this command is very {\em fragile} as |\verb| and |
| 456 |
% |\index|, and thus should not be used in an argument of other commands |
| 457 |
% including |\(re)newverbatim|. |
| 458 |
% |
| 459 |
% \DescribeMacro{\VVBbreakatFF} |
| 460 |
% \DescribeMacro{\VVBbreakatFFonly} |
| 461 |
% The other way to make |<FF>| acceptable is to give it a useful and natural |
| 462 |
% job, i.e.\ page breaking. This is done by giving |\VVBbreakatFF| to |
| 463 |
% \meta{beg-def-inner} (not {\em outer}). Its more powerful relative, |
| 464 |
% |\VVBbreakatFFonly|, is also available to allow page breaking at |<FF>| |
| 465 |
% only. Unfortunately, these two commands are incompatible with |
| 466 |
% |\(re)newtabverbatim| and thus you have to use |\(re)newverbatim| with |
| 467 |
% |\VVBbegintab| {\em followed by} them. |
| 468 |
% |
| 469 |
% |
| 470 |
% |
| 471 |
% \subsubsection{Non-Verbatim Stuff in \texttt{verbatim}-like Environment} |
| 472 |
% \label{sec:usage-var-nonverb} |
| 473 |
% |
| 474 |
% \DescribeMacro{\VVBnonverb} |
| 475 |
% You might have once wished to insert a few non-verbatim stuff, for example |
| 476 |
% math stuff. The command, to be given to \meta{beg-def-outer}; |
| 477 |
% |
| 478 |
%\begin{quote} |
| 479 |
%\newverbatim{verbatimwithnv}{\VVBnonverb{\!}\ttfamily}{}{}{} |
| 480 |
%\begin{verbatimwithnv} |
| 481 |
%\VVBnonverb{\!$\langle\mbox{\textit{char}}\rangle$!} |
| 482 |
%\end{verbatimwithnv} |
| 483 |
%\end{quote} |
| 484 |
% |
| 485 |
% makes it possible. For example, the author just did the following to |
| 486 |
% produce the result shown above. |
| 487 |
% |
| 488 |
%\begin{iverbatim} |
| 489 |
%\newverbatim{verbatimwithnv}{\VVBnonverb{\!}}{}{}{} |
| 490 |
%\begin{verbatimwithnv} |
| 491 |
%\VVBnonverb{\!$\langle\mbox{\textit{char}}\rangle$!} |
| 492 |
%\end{verbatimwithnv} |
| 493 |
%\end{iverbatim} |
| 494 |
% |
| 495 |
% As shown in the example above, the non-verbatim staff is surrounded by |
| 496 |
% a pair of \meta{char}, the letter `|!|' in this case. Note that |
| 497 |
% \meta{char} has to be preceded by `|\|' when it is given as the argument of |
| 498 |
% |\VVBnonbverb|, and \meta{char} should not be `|\|'. Also note that the |
| 499 |
% default font for the non-verbatim part % is not that for verbatim part, |
| 500 |
% but the font used outside the environment |
| 501 |
% |
| 502 |
% \footnote{Strictly speaking, the font used when \cs{VVBnonverb} is |
| 503 |
% invoked. Thus if \cs{VVBnonverb} is preceded by a font changing command, |
| 504 |
% the fond chosen by the command will be used.}. |
| 505 |
% |
| 506 |
% \DescribeMacro{\VVBnonverbmath} |
| 507 |
% As mentioned above, math stuffs will be most desirable to be |
| 508 |
% non-verbatim. Thus the macro; |
| 509 |
% |
| 510 |
%\begin{quote} |
| 511 |
%\newverbatim{verbatimwithnv}{\VVBnonverbmath\ttfamily}{}{}{} |
| 512 |
%\begin{verbatimwithnv} |
| 513 |
%\VVBnonverbmath[\$\langle\mbox{\textit{char}}\rangle$] |
| 514 |
%\end{verbatimwithnv} |
| 515 |
%\end{quote} |
| 516 |
% gives you a shorthand to typeset the stuff surrounded by a pair of |
| 517 |
% \meta{char} in math mode. Since the default of \meta{char} is |$| as |
| 518 |
% expected, the example above may be; |
| 519 |
% |
| 520 |
%\begin{iverbatim} |
| 521 |
%\newverbatim{verbatimwithnv}{\VVBnonverbmath}{}{}{} |
| 522 |
%\begin{verbatimwithnv} |
| 523 |
%\VVBnonverb{\$\langle\mbox{\textit{char}}\rangle$} |
| 524 |
%\end{verbatimwithnv} |
| 525 |
%\end{iverbatim} |
| 526 |
% |
| 527 |
% |
| 528 |
% |
| 529 |
% \subsubsection{Verbatim Input} |
| 530 |
% \label{sec:usage-var-input} |
| 531 |
% |
| 532 |
% The last thing \textsf{varvbtm} gives you is; |
| 533 |
% |
| 534 |
% \begin{itemize}\item[] |
| 535 |
% |\(re)newverbatiminput|\Meta{command}\opt{n-args}\opt{default}|%|\\ |
| 536 |
% \phantom{\texttt{+(re)newverbatiminput}} |
| 537 |
% \Meta{beg-def-outer}\Meta{beg-def-inner}|%|\\ |
| 538 |
% \phantom{\texttt{+(re)newverbatiminput}} |
| 539 |
% \Meta{end-def-inner}\Meta{end-def-outer} |
| 540 |
% \end{itemize} |
| 541 |
% |
| 542 |
% to define a \meta{command} to |\input| a file. Since this define a |
| 543 |
% \meta{command} instead of an environment, \meta{command} should have `|\|' |
| 544 |
% as its prefix. The \meta{command} has at least one mandatory argument, |
| 545 |
% \meta{file} to be input, which can be referred as first argument if |
| 546 |
% \opt{default} is not supplied, or as second otherwise. Note that, |
| 547 |
% however, if the \meta{command} does not have any other arguments, you can |
| 548 |
% omit \opt{n-arg}. |
| 549 |
% |
| 550 |
% For example; |
| 551 |
% |
| 552 |
%\begin{iverbatim} |
| 553 |
%\newverbatiminput{\vinput}{}{}{}{} |
| 554 |
%\end{iverbatim} |
| 555 |
% |
| 556 |
% defines |\vinput|\Meta{file} (and |\vinput*|) that |\input| a \meta{file} |
| 557 |
% as if the \meta{file} has |\begin|\slash|\end{verbatim}| at its first and |
| 558 |
% last lines. A little bit more complicated example; |
| 559 |
% |
| 560 |
%\begin{iverbatim} |
| 561 |
%\newverbatiminput{\indfnsvinput}[2][\footnotesize]% |
| 562 |
% {\begin{itemize}\item[]#1}{}{}{\end{itemize}} |
| 563 |
%\end{iverbatim} |
| 564 |
% |
| 565 |
% defines a indented-footnotesize-by-default version of |\vinput|. |
| 566 |
% |
| 567 |
% |
| 568 |
% |
| 569 |
% \IndexPrologue{\newpage\section*{Index} |
| 570 |
% Underlined number refers to the page where the specification of |
| 571 |
% corresponding entry is described.} |
| 572 |
% \StopEventually{ |
| 573 |
% \section*{Acknowledgments} |
| 574 |
% |
| 575 |
% The author thanks to Noboru Matsuda and Carlos Puchol whose posts to |
| 576 |
% news groups triggered writing very first version of macros in |
| 577 |
% \textsf{newvbtm} and \textsf{varvbtm}. |
| 578 |
% |
| 579 |
% For the implementation of these style files, the author refers the base |
| 580 |
% implementations of the macros for \texttt{verbatim} environment. |
| 581 |
% These macros are written by Leslie Lamport as a part of |
| 582 |
% \LaTeX-2.09 and \LaTeXe{} (1997/12/01) to which Johannes Braams and other |
| 583 |
% authors also contributed. |
| 584 |
% |
| 585 |
% \PrintIndex} |
| 586 |
% |
| 587 |
% |
| 588 |
% |
| 589 |
% \newpage |
| 590 |
% \section{Implementation} |
| 591 |
% \label{sec:imp} |
| 592 |
% \subsection{Tricks for Compatibility} |
| 593 |
% \label{sec:imp-compat} |
| 594 |
% |
| 595 |
% \begin{macro}{\ifnvb@LaTeXe} |
| 596 |
% At the very beginning of each style file, we check whether it is loaded by |
| 597 |
% \LaTeXe{} or \LaTeX-2.09, declare the flag |\ifnvb@LaTeXe| and set it to |
| 598 |
% true or false, and then declare |\NeedsTeXFormat| and |\ProvidesPackage| |
| 599 |
% if \LaTeXe{}. This part is embedded at the beginning of |
| 600 |
% \textsf{newvbtm.dtx} in a tricky manner to let \textsf{docstrip} produce |
| 601 |
% the following code, for example for \textsf{newvbtm}. |
| 602 |
% \SpecialIndex{\NeedsTeXFormat} |
| 603 |
% \SpecialIndex{\ProvidesPackage} |
| 604 |
% \end{macro} |
| 605 |
% |
| 606 |
%\begin{itemize}\item[] |
| 607 |
%\begin{verbatim} |
| 608 |
%\newif\ifnvb@LaTeXe |
| 609 |
%\def\next{LaTeX2e} |
| 610 |
%\ifx\fmtname\next \nvb@LaTeXetrue |
| 611 |
%\def\next{ |
| 612 |
%\NeedsTeXFormat{LaTeX2e}[1994/12/01] |
| 613 |
%\ProvidesPackage{newvbtm}} |
| 614 |
%\else \nvb@LaTeXefalse |
| 615 |
%\def\next[#1]{}\fi |
| 616 |
%\next |
| 617 |
%[2002/04/08 v1.1 ] |
| 618 |
%\end{verbatim} |
| 619 |
%\end{itemize} |
| 620 |
% |
| 621 |
% \SpecialIndex{\RequirePackage} |
| 622 |
% In \textsf{varvbtm}, loading \textsf{newvbtm} also takes care of the |
| 623 |
% compatibility. That is, \textsf{newvbtm} is loaded by |\RequirePackage| if |
| 624 |
% \LaTeXe, while simply by |\input| otherwise. Since \textsf{newvbtm} does |
| 625 |
% not modifies any existential macros nor declares anything by |\new| except |
| 626 |
% for |\newif|\footnote{ |
| 627 |
% |
| 628 |
% Multiple \cs{newif} for a flag is safe, and thus we do it for |
| 629 |
% \cs{nvb@LaTeXe} both in \textsf{newvbtm} and \textsf{varvbtm}.}, |
| 630 |
% |
| 631 |
% it is safe even if |\newvbtm| is loaded multiple times in \LaTeX-2.09. |
| 632 |
% |
| 633 |
% \iffalse |
| 634 |
%<*varvbtm> |
| 635 |
% \fi |
| 636 |
% \begin{macrocode} |
| 637 |
|
| 638 |
\ifnvb@LaTeXe |
| 639 |
\RequirePackage{newvbtm} |
| 640 |
\else |
| 641 |
\input{newvbtm.sty} |
| 642 |
\fi |
| 643 |
% \end{macrocode} |
| 644 |
% \iffalse |
| 645 |
%</varvbtm> |
| 646 |
% \fi |
| 647 |
% |
| 648 |
% |
| 649 |
% |
| 650 |
% \subsection{\textsf{newvbtm}} |
| 651 |
% \label{sec:imp-new} |
| 652 |
% |
| 653 |
% \iffalse |
| 654 |
%<*newvbtm> |
| 655 |
% \fi |
| 656 |
% \begin{macro}{\newverbatim} |
| 657 |
% \begin{macro}{\renewverbatim} |
| 658 |
% \begin{macro}{\nvb@newenv} |
| 659 |
% \begin{macro}{\nvb@Xnewverbatim} |
| 660 |
% The macros |\newverbatim| and |\renewverbatim| call a macro |
| 661 |
% |\nvb@newverbatim| after |\nvb@newenv| and |\nvb@Xnewverbatim| are made |
| 662 |
% |\let|-equal to appropriate macros. That is, |\nvb@newenv| is either |
| 663 |
% |\newenvironment| or |\renewenvironment|, and |\nvb@Xnewverbatim| is, in |
| 664 |
% both cases, |\nvb@xnewverbatim| that is the body of our environment |
| 665 |
% definition as explained later. Note that |\nvb@Xnewverbatim| will be set |
| 666 |
% differently in the macros defined in \textsf{varvbtm}. |
| 667 |
% \end{macro}\end{macro}\end{macro}\end{macro} |
| 668 |
% |
| 669 |
% \begin{macro}{\nvb@newverbatim} |
| 670 |
% \begin{macro}{\nvb@inewverbatim} |
| 671 |
% The common macro |\nvb@newverbatim| checks the existence of \opt{n-args} |
| 672 |
% and then calls |\nvb@inewverbatim| to check that of \opt{default}. Note |
| 673 |
% that since \LaTeX-2.09's |\(re)newenvironment| does not have |
| 674 |
% \opt{default}, these macros have definitions slightly different from those |
| 675 |
% for \LaTeXe{} to pass an empty argument to |\nvb@Xnewverbatim| always. |
| 676 |
% \end{macro}\end{macro} |
| 677 |
% |
| 678 |
% \begin{macrocode} |
| 679 |
|
| 680 |
\def\newverbatim{\let\nvb@newenv\newenvironment |
| 681 |
\let\nvb@Xnewverbatim\nvb@xnewverbatim \nvb@newverbatim} |
| 682 |
\def\renewverbatim{\let\nvb@newenv\renewenvironment |
| 683 |
\let\nvb@Xnewverbatim\nvb@xnewverbatim \nvb@newverbatim} |
| 684 |
|
| 685 |
\ifnvb@LaTeXe |
| 686 |
\def\nvb@newverbatim#1{\@ifnextchar[%] |
| 687 |
{\nvb@inewverbatim{#1}}{\nvb@inewverbatim{#1}[0]}} |
| 688 |
\def\nvb@inewverbatim#1[#2]{\@ifnextchar[%] |
| 689 |
{\nvb@Xnewverbatim{#1}[#2]}{\nvb@Xnewverbatim{#1}[#2][]}} |
| 690 |
\else |
| 691 |
\def\nvb@newverbatim#1{\@ifnextchar[%] |
| 692 |
{\nvb@inewverbatim{#1}}{\nvb@Xnewverbatim{#1}[0][]}} |
| 693 |
\def\nvb@inewverbatim#1[#2]{\nvb@Xnewverbatim{#1}[#2][]} |
| 694 |
\fi |
| 695 |
|
| 696 |
% \end{macrocode} |
| 697 |
% |
| 698 |
% \begin{macro}{\nvb@xnewverbatim} |
| 699 |
% \changes{v1.1}{2002/04/05} |
| 700 |
% {\cs{@tempa} is replaced by \cs{nvb@tempa} to avoid conflict in 2.09.} |
| 701 |
% \begin{macro}{\nvb@currenvir} |
| 702 |
% \begin{macro}{\nvb@defxverbatim} |
| 703 |
% \begin{macro}{\nvb@xverbatim} |
| 704 |
% \begin{macro}{\nvb@beginhook} |
| 705 |
% \begin{macro}{\nvb@endinhook} |
| 706 |
% \begin{macro}{\nvb@endouthook} |
| 707 |
% The macro |\nvb@xnewverbatim| performs the essential part of the function |
| 708 |
% to define a verbatim-like environment. First it checks if \meta{default} |
| 709 |
% is empty so that this optional argument is not passed to |
| 710 |
% |\(re)newenvironment|, especially of \LaTeX-2.09. Then it calls |
| 711 |
% |\(re)newenvironment| to define \meta{env} which performs the following in |
| 712 |
% \meta{beg-def} part. |
| 713 |
% |
| 714 |
% \begin{enumerate} |
| 715 |
% \def\labelenumi{b\arabic{enumi}.} |
| 716 |
% \item |
| 717 |
% |\def|-ine |\nvb@currenvir| to let it have \meta{env} as its body, so that |
| 718 |
% the name of environment can be referred by the macros in \textsf{varvbtm}. |
| 719 |
% |
| 720 |
% \item |
| 721 |
% Execute \meta{beg-def-outer}. |
| 722 |
% |
| 723 |
% \item |
| 724 |
% Open a group to localize assignments in \LaTeX's |\@verbatim|, especially |
| 725 |
% those of flags referred in |\list|-related macros. |
| 726 |
% |
| 727 |
% \item |
| 728 |
% Perform what \LaTeX's |\verbatim| does, i.e.\ |\@verbatim| etc., except for |
| 729 |
% |\@xverbatim|. In starred-version, only |\@verbatim| is called in this |
| 730 |
% step. |
| 731 |
% |
| 732 |
% \item |
| 733 |
% Call |\nvb@defxverbatim| to define |\nvb@xverbatim| that performs what |
| 734 |
% \LaTeX's \hbox{|\@xverbatim|} does but its argument terminator is |
| 735 |
% ``|\end|\Meta{env}''. The definition of |\nvb@defxverbatim| is done in a |
| 736 |
% group in which `|\|', `|{|' and `|}|' have ``other'' |\catcode| with the |
| 737 |
% well-known technique using `\verb!|!', `|[|' and `|]|'. |
| 738 |
% |
| 739 |
% \item |
| 740 |
% Call |\nvb@beginhook|, which is usually |\relax| but will not be if |
| 741 |
% |\VVBnonverb| is executed in \meta{beg-def-outer} as described in |
| 742 |
% \S\ref{sec:imp-var-nonverb}. |
| 743 |
% |
| 744 |
% \item |
| 745 |
% Execute \meta{beg-def-inner}. |
| 746 |
% |
| 747 |
% \item |
| 748 |
% Call |\nvb@xverbatim| to typeset the body of environment verbatim. |
| 749 |
% \end{enumerate} |
| 750 |
% |
| 751 |
% The \meta{end-def} part for \meta{env} performs the following. |
| 752 |
% |
| 753 |
% \begin{enumerate} |
| 754 |
% \def\labelenumi{e\arabic{enumi}.} |
| 755 |
% \item |
| 756 |
% Execute \meta{end-def-inner}. |
| 757 |
% |
| 758 |
% \item |
| 759 |
% Call |\nvb@endinhook|, which is |\relax| now but could do something if |
| 760 |
% necessary. |
| 761 |
% |
| 762 |
% \item |
| 763 |
% Call |\endverbatim| to close the |\trivlist| opened by |\@verbatim|. |
| 764 |
% |
| 765 |
% \item |
| 766 |
% Close the group opened by \meta{beg-def}. |
| 767 |
% |
| 768 |
% \item |
| 769 |
% Execute \meta{end-def-outer}. |
| 770 |
% |
| 771 |
% \item |
| 772 |
% Call |\nvb@endouthook|, which is also |\relax| now but might not be. |
| 773 |
% |
| 774 |
% \item |
| 775 |
% Turn |\if@endpe| true to tell |\end| that \meta{env} is list-like. |
| 776 |
% \end{enumerate} |
| 777 |
% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}\end{macro}\end{macro} |
| 778 |
% |
| 779 |
% \begin{macrocode} |
| 780 |
\long\def\nvb@xnewverbatim#1[#2][#3]#4#5#6#7{\def\nvb@tempa{#3}% |
| 781 |
\ifx\nvb@tempa\@empty \def\nvb@tempa{[#2]}% |
| 782 |
\else \def\nvb@tempa{[#2][#3]}\fi |
| 783 |
\def\@tempb{\nvb@newenv{#1}}% |
| 784 |
\expandafter\@tempb\nvb@tempa |
| 785 |
{\def\nvb@currenvir{#1}% |
| 786 |
#4\begingroup \@verbatim \frenchspacing \@vobeyspaces |
| 787 |
\nvb@defxverbatim{#1}\nvb@beginhook #5\nvb@xverbatim}% |
| 788 |
{#6\nvb@endinhook \endverbatim \endgroup |
| 789 |
#7\nvb@endouthook \@endpetrue}% |
| 790 |
\def\@tempb{\nvb@newenv{#1*}}% |
| 791 |
\expandafter\@tempb\nvb@tempa |
| 792 |
{\def\nvb@currenvir{#1*}% |
| 793 |
#4\begingroup \@verbatim |
| 794 |
\nvb@defxverbatim{#1*}\nvb@beginhook #5\nvb@xverbatim}% |
| 795 |
{\@nameuse{end#1}}} |
| 796 |
\let\nvb@beginhook\relax |
| 797 |
\let\nvb@endinhook\relax |
| 798 |
\let\nvb@endouthook\relax |
| 799 |
|
| 800 |
\begingroup \catcode`\|\z@ \catcode`\[\@ne \catcode`\]\tw@ |
| 801 |
\@makeother\{ \@makeother\} \@makeother\\ |
| 802 |
|gdef|nvb@defxverbatim#1[|long|def|nvb@xverbatim##1\end{#1}[##1|end[#1]]] |
| 803 |
|endgroup |
| 804 |
% \end{macrocode} |
| 805 |
% |
| 806 |
% \iffalse |
| 807 |
%</newvbtm> |
| 808 |
% \fi |
| 809 |
% |
| 810 |
% |
| 811 |
% |
| 812 |
% \subsection{\textsf{varvbtm}} |
| 813 |
% \label{sec:imp-var} |
| 814 |
% |
| 815 |
% \iffalse |
| 816 |
%<*varvbtm> |
| 817 |
% \fi |
| 818 |
% |
| 819 |
% \subsubsection{Tab Emulation} |
| 820 |
% \label{sec:imp-var-tab} |
| 821 |
% |
| 822 |
% For tab emulation, we declare the following registers. |
| 823 |
% |
| 824 |
% \begin{itemize} |
| 825 |
% \item |
| 826 |
% \begin{macro}{\c@VVBtabwidth} |
| 827 |
% The count register |\c@VVBtabwidth| that has the number of characters |
| 828 |
% between tab stops. The default value 8 is set. |
| 829 |
% \end{macro} |
| 830 |
% |
| 831 |
% \item |
| 832 |
% \begin{macro}{\vvb@tabwidth} |
| 833 |
% The dimen register |\vvb@tabwidth| that has the distance between tab |
| 834 |
% stops. |
| 835 |
% \end{macro} |
| 836 |
% |
| 837 |
% \item |
| 838 |
% \begin{macro}{\vvb@everypar} |
| 839 |
% The toks register |\vvb@everypar| to save the contents of |\everypar|, |
| 840 |
% though it is usually ineffective. |
| 841 |
% \end{macro} |
| 842 |
% |
| 843 |
% \item |
| 844 |
% \begin{macro}{\vvb@tabbox} |
| 845 |
% The box register |\vvb@tabbox| that contains stuffs between the beginning |
| 846 |
% of line or a tab stop and the end of line or another tab stop. |
| 847 |
% \end{macro} |
| 848 |
% \end{itemize} |
| 849 |
% |
| 850 |
% \begin{macrocode} |
| 851 |
|
| 852 |
%% Tab Emulation |
| 853 |
|
| 854 |
\newcounter{VVBtabwidth}\c@VVBtabwidth8 |
| 855 |
\newdimen\vvb@tabwidth |
| 856 |
\newtoks\vvb@everypar |
| 857 |
\newbox\vvb@tabbox |
| 858 |
|
| 859 |
% \end{macrocode} |
| 860 |
% |
| 861 |
% \begin{macro}{\VVBbegintab} |
| 862 |
% \begin{macro}{\vvb@tabfil} |
| 863 |
% \begin{macro}{\vvb@tabdef} |
| 864 |
% The macro |\VVBbegintab|, which should be called from \meta{beg-def-inner} |
| 865 |
% part, performs a few preprocessing for tabbing some of which override the |
| 866 |
% definition in |\@verbatim|. |
| 867 |
% |
| 868 |
% A line in a tabbing verbatim environment is |
| 869 |
% enclosed in a box |\vvb@tabbox| so that we can know the horizontal |
| 870 |
% position of a tab. Thus, we let |\everypar| call |\vvb@tabbol| to |
| 871 |
% open the box, and |\par| be |\vvb@tabeol| to close. Note that |
| 872 |
% |\obeylines| after the |\let| for |\par| is necessary to make `|^M|' |
| 873 |
% |\let|-equal to our own |\par|. |
| 874 |
% |
| 875 |
% Then we set |\vvb@tabwidth| to |
| 876 |
% $|\c@VVBtabwidth|\times\hbox{\meta{width-of-\texttt{A}}}$. We also |
| 877 |
% |\def|-ine |\vvb@tabfil| to produce a sequence of `\verb*! !' in the case |
| 878 |
% of starred environment, i.e.\ the |\catcode| of space is not |\active|. |
| 879 |
% |
| 880 |
% Finally, we make |^I| active and |\let|-equal to |\vvb@tab| by |
| 881 |
% |\vvb@tabdef|. |
| 882 |
% \end{macro}\end{macro}\end{macro} |
| 883 |
% |
| 884 |
% \begin{macro}{\VVBendtab} |
| 885 |
% The macro |\VVBendtab|, which should be called from \meta{end-def-inner} |
| 886 |
% part, closes the box |\vvb@tabbox| if necessary, i.e.\ |\end|\Meta{env} is |
| 887 |
% not at the beginning of a line and thus not in vertical mode. |
| 888 |
% \end{macro} |
| 889 |
% |
| 890 |
% \begin{macrocode} |
| 891 |
\def\VVBbegintab{\vvb@everypar\everypar |
| 892 |
\everypar{\vvb@tabbol \the\vvb@everypar}% |
| 893 |
\let\par\vvb@tabeol \obeylines |
| 894 |
\settowidth\vvb@tabwidth{A}\multiply\vvb@tabwidth\c@VVBtabwidth |
| 895 |
\ifnum\catcode`\ =\active \let\vvb@tabfil\relax |
| 896 |
\else \def\vvb@tabfil{\leaders\hbox{\char`\ }}\fi |
| 897 |
\catcode`\^^I\active \vvb@tabdef} |
| 898 |
{\catcode`\^^I\active \gdef\vvb@tabdef{\let^^I\vvb@tab}} |
| 899 |
\def\VVBendtab{\ifvmode\else \par \fi} |
| 900 |
|
| 901 |
% \end{macrocode} |
| 902 |
% |
| 903 |
% \begin{macro}{\vvb@tabbol} |
| 904 |
% \begin{macro}{\vvb@tabeol} |
| 905 |
% The macro |\vvb@tabbol| opens the box |\vvb@tabbox|, while |\vvb@tabeol| |
| 906 |
% closes it after |\leavevmode| to ensure the box is opened and puts the |
| 907 |
% contents of the box as the last (and maybe only one) element of a |
| 908 |
% paragraph terminated by |\@@par|. The flag |\if@tempswa|, which |\@verbatim| |
| 909 |
% initiated to false, is examined in order to prevent |^M| just |
| 910 |
% following |\begin|\Meta{env} from making an empty line. Since the flag is |
| 911 |
% turned true by both |\vvb@tabbol| and |\vvb@tabeol|, a |^M| is in effect |
| 912 |
% in other cases. |
| 913 |
% \end{macro}\end{macro} |
| 914 |
% |
| 915 |
% \begin{macrocode} |
| 916 |
\def\vvb@tabbol{\@tempswatrue \setbox\vvb@tabbox\hbox\bgroup} |
| 917 |
\def\vvb@tabeol{\if@tempswa |
| 918 |
\leavevmode \egroup \box\vvb@tabbox \@@par \penalty\interlinepenalty |
| 919 |
\fi \@tempswatrue} |
| 920 |
|
| 921 |
% \end{macrocode} |
| 922 |
% |
| 923 |
% \begin{macro}{\vvb@tab} |
| 924 |
% The macro |\vvb@tab|, to which |^I| is made |\let|-equal, is the heart of |
| 925 |
% tabbing. It first closes |\vvb@tabbox| after |\leavevmode| to ensure its |
| 926 |
% opening. Then it moves to the next tab stop by putting a box of $(\lfloor |
| 927 |
% w/t\rfloor+1)\times t$ wide, where $w$ is the width of |\vvb@tabbox| and |
| 928 |
% $t$ is |\vvb@tabwidth|. In the box, the contents of |\vvb@tabbox| is |
| 929 |
% flushed left by |\vvb@tabfil#\hfil|, which makes invisible space in |
| 930 |
% non-starred environment because |\vvb@tabfil| is relax, while produces a |
| 931 |
% sequence of `\verb*! !' by |\leaders| in starred environment. After the |
| 932 |
% box is put, it opens |\vvb@tabbox| again by |\vvb@tabbol|. |
| 933 |
% \end{macro} |
| 934 |
% |
| 935 |
% \begin{macrocode} |
| 936 |
\def\vvb@tab{\leavevmode \egroup |
| 937 |
\@tempdima\wd\vvb@tabbox \divide\@tempdima\vvb@tabwidth |
| 938 |
\multiply\@tempdima\vvb@tabwidth \advance\@tempdima\vvb@tabwidth |
| 939 |
\hbox to\@tempdima{\unhbox\vvb@tabbox \vvb@tabfil\hfil}\vvb@tabbol} |
| 940 |
|
| 941 |
% \end{macrocode} |
| 942 |
% |
| 943 |
% \begin{macro}{\newtabverbatim} |
| 944 |
% \begin{macro}{\renewtabverbatim} |
| 945 |
% \begin{macro}{\vvb@xnewtabverbatim} |
| 946 |
% Finally, we define |\newtabverbatim| and |\renewtabverbatim| for tabbing |
| 947 |
% verbatim environment definition. They call the common macro |
| 948 |
% |\nvb@newverbatim| described in \S\ref{sec:imp-new} to check the existence |
| 949 |
% of optional arguments as |\(re)newverbatim| does, but |\nvb@Xnewverbatim| |
| 950 |
% is made |\let|-equal to |\vvb@xnewtabverbatim| that simply calls |
| 951 |
% |\nvb@xnewverbatim| attaching |\VVBbegintab| and |\VVBendtab| to |
| 952 |
% \meta{beg-def-inner} and \meta{end-def-inner} respectively. |
| 953 |
% \end{macro}\end{macro}\end{macro} |
| 954 |
% |
| 955 |
% \begin{macrocode} |
| 956 |
\def\newtabverbatim{\let\nvb@newenv\newenvironment |
| 957 |
\let\nvb@Xnewverbatim\vvb@xnewtabverbatim \nvb@newverbatim} |
| 958 |
\def\renewtabverbatim{\let\nvb@newenv\renewenvironment |
| 959 |
\let\nvb@Xnewverbatim\vvb@xnewtabverbatim \nvb@newverbatim} |
| 960 |
\def\vvb@xnewtabverbatim#1[#2][#3]#4#5#6{% |
| 961 |
\nvb@xnewverbatim{#1}[#2][#3]{#4}{#5\VVBbegintab}{\VVBendtab#6}} |
| 962 |
|
| 963 |
%%^L |
| 964 |
% \end{macrocode} |
| 965 |
% |
| 966 |
% |
| 967 |
% |
| 968 |
% \subsubsection{Form Feed Character} |
| 969 |
% \label{sec:imp-var-ff} |
| 970 |
% |
| 971 |
% \begin{macro}{\VVBprintFF} |
| 972 |
% \begin{macro}{\vvb@printFF} |
| 973 |
% \begin{macro}{\VVBprintFFas} |
| 974 |
% \begin{macro}{\vvb@printFFas} |
| 975 |
% The macro |\VVBprintFF| simply makes |^L| |\let|-equal to |\vvb@printFF| |
| 976 |
% whose body is print image of |^L| and is defined by |\VVBprintFFas|. |
| 977 |
% Since the body of |\VVBprintFF| has |^L| that usually cannot appear in |
| 978 |
% the body of a macro because of its |\active|-ness and {\em outerness}, its |
| 979 |
% |\def|-inition is enclosed in a group in which |^L| is made |\relax| |
| 980 |
% together with that of |\VVBbreakatFF|. |
| 981 |
% |
| 982 |
% The macro |\VVBprintFFas|, cooperating with |\VVB@printFFas|, defines its |
| 983 |
% argument \meta{str} verbatim as the body of |\vvb@printFF| by a well-known |
| 984 |
% trick with grouping and \hbox{|\@sanitize|} used in, for example, |\index|. |
| 985 |
% The default print image ``|^L|'' is also defined by |\VVBprintFFas|. |
| 986 |
% \end{macro}\end{macro}\end{macro}\end{macro} |
| 987 |
% |
| 988 |
% \begin{macro}{\VVBbreakatFF} |
| 989 |
% \begin{macro}{\vvb@FFpar} |
| 990 |
% \begin{macro}{\vvb@breakFF} |
| 991 |
% \begin{macro}{\vvb@parafterFF} |
| 992 |
% The macro |\VVBbreakatFF| makes |^L| |\let|-equal to |\vvb@breakFF| and |
| 993 |
% saves the definition of |\par| in |\vvb@FFpar| because it will be modified |
| 994 |
% by |\vvb@breakFF|\@. The macro |\vvb@breakFF| breaks the current page and |
| 995 |
% then makes |\par|, and |^M| by |\obeylines|, |\let|-equal to |
| 996 |
% |\vvb@parafterFF|\@. Since |\vvb@parafterFF| will do |\par| saved in |
| 997 |
% |\vvb@FFpar| only when horizontal mode, |^M| just following |^L| will not |
| 998 |
% produce an empty line at the beginning of the new page. After the first |
| 999 |
% |^M| in the page, |\par| and |^M| regain their original definitions. |
| 1000 |
% \end{macro}\end{macro}\end{macro}\end{macro} |
| 1001 |
% |
| 1002 |
% \begin{macro}{\VVBbreakatFFonly} |
| 1003 |
% \begin{macro}{\vvb@FF@par} |
| 1004 |
% \begin{macro}{\vvb@FFpenalty} |
| 1005 |
% \begin{macro}{\vvb@parnobreak} |
| 1006 |
% The macro |\VVBbreakatFFonly| does what |\VVBbreakatFF| by calling it but |
| 1007 |
% before that it makes |\par| |\let|-equal to |\vvb@parnobreak| saving its |
| 1008 |
% definition in |\vvb@FF@par|. The macro |\vvb@parnobreak| temporarily |
| 1009 |
% makes |\penalty| |\let|-equal to |\@tempcnta| in order that |
| 1010 |
% |\penalty|\meta{num} in original |\par| saved in |\vvb@FF@par| do |
| 1011 |
% nothing. Then it restores |\penalty| from |\vvb@FFpenalty| and inserts |
| 1012 |
% |\nobreak| to inhibit page break at |^M|. The temporary modification of |
| 1013 |
% |\penalty| is done |\global|-ly because of the compatibility with the |
| 1014 |
% tabbing verbatim. |
| 1015 |
% \end{macro}\end{macro}\end{macro}\end{macro} |
| 1016 |
% |
| 1017 |
% \begin{macrocode} |
| 1018 |
|
| 1019 |
%% Form Feed Character |
| 1020 |
|
| 1021 |
\begingroup \let^^L\relax |
| 1022 |
\gdef\VVBprintFF{\let^^L\vvb@printFF} |
| 1023 |
\gdef\VVBbreakatFF{\let^^L\vvb@breakFF \let\vvb@FFpar\par} |
| 1024 |
\endgroup |
| 1025 |
|
| 1026 |
\def\VVBprintFFas{\begingroup \@sanitize \vvb@printFFas} |
| 1027 |
\def\vvb@printFFas#1{\endgroup \def\vvb@printFF{#1}} |
| 1028 |
\VVBprintFFas{^L} |
| 1029 |
|
| 1030 |
\def\vvb@breakFF{\par \vfil \break \let\par\vvb@parafterFF \obeylines} |
| 1031 |
\def\vvb@parafterFF{\ifhmode \vvb@FFpar \fi \let\par\vvb@FFpar \obeylines} |
| 1032 |
|
| 1033 |
\gdef\VVBbreakatFFonly{\let\vvb@FF@par\par |
| 1034 |
\let\par\vvb@parnobreak \obeylines \VVBbreakatFF} |
| 1035 |
\let\vvb@FFpenalty\penalty |
| 1036 |
\def\vvb@parnobreak{\global\let\penalty\@tempcnta \vvb@FF@par |
| 1037 |
\global\let\penalty\vvb@FFpenalty \nobreak} |
| 1038 |
|
| 1039 |
%%^L |
| 1040 |
% \end{macrocode} |
| 1041 |
% |
| 1042 |
% |
| 1043 |
% |
| 1044 |
% \subsubsection{Non-Verbatim} |
| 1045 |
% \label{sec:imp-var-nonverb} |
| 1046 |
% |
| 1047 |
% \begin{macro}{\VVBnonverb} |
| 1048 |
% \begin{macro}{\vvb@nvfont} |
| 1049 |
% \begin{macro}{\vvb@currsize} |
| 1050 |
% \begin{macro}{\vvb@beginhook} |
| 1051 |
% The macro |\VVBnonverb| saves the current font in |\vvb@nvfont|. If |
| 1052 |
% \LaTeXe, its body will be a sequence of |\fontencoding|\meta{curr-encoding} |
| 1053 |
% and its relatives followed by |\selectfont|. Otherwise, its body will be |
| 1054 |
% the current font size command saved in |\vvb@currsize| followed by the |
| 1055 |
% current font produced by |\the\font|. Then |\VVBnonverb| defines |
| 1056 |
% |\nvb@beginhook| so as to call |\vvb@nonverb| with the argument |
| 1057 |
% |\|\meta{char} just before \meta{beg-def-inner} is executed. |
| 1058 |
% \end{macro}\end{macro}\end{macro}\end{macro} |
| 1059 |
% |
| 1060 |
% \begin{macro}{\VVBnonverbmath} |
| 1061 |
% \begin{macro}{\vvb@nonverbmath} |
| 1062 |
% \begin{macro}{\vvb@@bnonverb} |
| 1063 |
% \begin{macro}{\vvb@@enonverb} |
| 1064 |
% The macro |\VVBnonverbmath| examines the existence of its optional |
| 1065 |
% argument |\|\meta{char} and calls |\VVBnonverb| via |\vvb@nonverbmath| |
| 1066 |
% with it or with |\$| if omitted. Prior to the call, it makes both |
| 1067 |
% |\vvb@@bnonverb| and |\vvb@@enonverb| |\let|-equal to `|$|' so that the |
| 1068 |
% non-verbatim part is surrounded by them. |
| 1069 |
% \end{macro}\end{macro}\end{macro}\end{macro} |
| 1070 |
% |
| 1071 |
% \begin{macrocode} |
| 1072 |
|
| 1073 |
%% Non-Verbatim |
| 1074 |
|
| 1075 |
\def\VVBnonverb#1{\ifnvb@LaTeXe |
| 1076 |
\edef\vvb@nvfont{\noexpand\fontencoding{\f@encoding}% |
| 1077 |
\noexpand\fontfamily{\f@family}% |
| 1078 |
\noexpand\fontseries{\f@series}% |
| 1079 |
\noexpand\fontshape{\f@shape}% |
| 1080 |
\noexpand\fontsize{\f@size}{\noexpand\f@baselineskip}% |
| 1081 |
\noexpand\selectfont}% |
| 1082 |
\else |
| 1083 |
\let\vvb@currsize\@currsize |
| 1084 |
\edef\vvb@nvfont{\noexpand\vvb@currsize \the\font}\fi |
| 1085 |
\def\nvb@beginhook{\vvb@nonverb#1}} |
| 1086 |
\def\VVBnonverbmath{\@ifnextchar[%] |
| 1087 |
{\vvb@nonverbmath}{\vvb@nonverbmath[\$]}} |
| 1088 |
\def\vvb@nonverbmath[#1]{\let\vvb@@bnonverb$\let\vvb@@enonverb$\VVBnonverb#1} |
| 1089 |
|
| 1090 |
% \end{macrocode} |
| 1091 |
% |
| 1092 |
% \begin{macro}{\vvb@nonverb} |
| 1093 |
% \begin{macro}{\vvb@bnonverb} |
| 1094 |
% \begin{macro}{\vvb@enonverb} |
| 1095 |
% \begin{macro}{\vvb@@bnonverb} |
| 1096 |
% \begin{macro}{\vvb@@enonverb} |
| 1097 |
% \begin{macro}{\do} |
| 1098 |
% \begin{macro}{\vvb@regaincat} |
| 1099 |
% The macro |\vvb@nonverb| defines the |\active| \meta{char} to open a |
| 1100 |
% |\hbox| after |\leavevmode| and then to call |\vvb@bnonverb| to do the |
| 1101 |
% following. First it selects the font saved in |\vvb@nvfont| and then |
| 1102 |
% restores |\catcode| of special characters by |\vvb@regaincat|. Since the |
| 1103 |
% body of |\vvb@regaincat| is the expansion result of |\dospecials| with the |
| 1104 |
% defintion of |\do| as; |
| 1105 |
% |
| 1106 |
%\begin{iverbatim} |
| 1107 |
%\def\do#1{\catcode`\noexpand#1\number\catcode`#1\relax} |
| 1108 |
%\end{iverbatim} |
| 1109 |
% |
| 1110 |
% it should be the sequence of ``\verb*!\catcode`\ 10!'' and so on. The |
| 1111 |
% macro |\vvb@bnoverb| also set |\catcode| of characters in |
| 1112 |
% |\verbatim@nolig@list| if exists or `|`|' otherwise to 12 (other). Then |
| 1113 |
% the |\catcode| of \meta{char} is made |\active| because it might not be by |
| 1114 |
% the preceding |\catcode| modification. Finaly it calls |\vvb@enonverb| to |
| 1115 |
% get non-verbatim stuff. |
| 1116 |
% |
| 1117 |
% The macro |\vvb@enonverb|, which is also defined in |\vvb@nonverb|, gets |
| 1118 |
% everything before \meta{char}, puts it in the |\hbox| surrounding it by |
| 1119 |
% |\vvb@@bnonverb| and |\vvb@@enonverb|, which are both `|$|' in the case of |
| 1120 |
% |\VVBnonverbmath| but |\relax| otherwise, and then closes the |\hbox|. |
| 1121 |
% |
| 1122 |
% Since the definitions of the \meta{char} and |\vvb@enonverb| should have |
| 1123 |
% |\active| \meta{char}, we use the trick with |\lowercase| in which the |
| 1124 |
% |\lccode| of `|~|' is the code of \meta{char}. |
| 1125 |
% |
| 1126 |
% After the definitions, the character `|\|' is made |\active| and |
| 1127 |
% |\let|-equal to |\vvb@esc| by |\vvb@escdef| so that we can find |
| 1128 |
% ``|end|\Meta{env}'', stored in |\vvb@endenvir| by |\vvb@enddef|, following |
| 1129 |
% `|\|'. Note that we cannot use the conventional scheme to get everything |
| 1130 |
% in the body of \meta{env} by |\nvb@xverbatim| because the |\catcode| of |
| 1131 |
% special characters are modified in non-verbatim part. Thus we make `|\|' |
| 1132 |
% active and |\vvb@xverbatim| |\relax|. |
| 1133 |
% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}\end{macro}\end{macro} |
| 1134 |
% |
| 1135 |
% \begin{macrocode} |
| 1136 |
\def\vvb@nonverb#1{\catcode`#1\active \begingroup \lccode`\~`#1\relax |
| 1137 |
\lowercase{\endgroup |
| 1138 |
\def~{\leavevmode \hbox\bgroup \vvb@bnonverb#1}% |
| 1139 |
\def\vvb@enonverb##1~{\vvb@@bnonverb |
| 1140 |
##1\vvb@@enonverb \egroup}}% |
| 1141 |
\catcode`\\\active \vvb@escdef \vvb@enddef \let\nvb@xverbatim\relax} |
| 1142 |
\def\vvb@bnonverb#1{\vvb@nvfont \vvb@regaincat |
| 1143 |
\ifx\verbatim@nolig@list\undefined \@makeother\`\relax |
| 1144 |
\else \let\do\@makeother \verbatim@nolig@list \fi |
| 1145 |
\catcode`#1\active \vvb@enonverb} |
| 1146 |
\let\vvb@@bnonverb\relax |
| 1147 |
\let\vvb@@enonverb\relax |
| 1148 |
\def\do#1{\catcode`\noexpand#1\number\catcode`#1\relax} |
| 1149 |
\edef\vvb@regaincat{\dospecials} |
| 1150 |
|
| 1151 |
% \end{macrocode} |
| 1152 |
% |
| 1153 |
% \begin{macro}{\vvb@escdef} |
| 1154 |
% \begin{macro}{\vvb@enddef} |
| 1155 |
% \begin{macro}{\vvb@endenvir} |
| 1156 |
% The macro |\vvb@escdef| simply let |\active| character `|\|' act as the |
| 1157 |
% macro |\vvb@esc|, while |\vvb@enddef| defines the macro |\vvb@endenvir| as |
| 1158 |
% ``|end|\Meta{env}'' referring the environment name saved in |
| 1159 |
% |\vvb@currenvir|. Since these two macros has `|\|', `|{|' and `|}|' of |
| 1160 |
% ``other'' category, the well-known technique replacing them is used. |
| 1161 |
% \end{macro}\end{macro}\end{macro} |
| 1162 |
% |
| 1163 |
% \begin{macrocode} |
| 1164 |
\begingroup \catcode`\|\z@ \catcode`\[\@ne \catcode`\]\tw@ |
| 1165 |
\@makeother\{ \@makeother\} \catcode`\\|active |
| 1166 |
|gdef|vvb@escdef[|let\|vvb@esc] |
| 1167 |
|gdef|vvb@enddef[|edef|vvb@endenvir[end{|nvb@currenvir}]] |
| 1168 |
|endgroup |
| 1169 |
|
| 1170 |
% \end{macrocode} |
| 1171 |
% |
| 1172 |
% \begin{macro}{\vvb@esc} |
| 1173 |
% \begin{macro}{\vvb@checkend} |
| 1174 |
% The macro |\vvb@esc| for `|\|' in |\active| examines if it is followed by |
| 1175 |
% |end|\Meta{env} stored in |\vvb@endenvir|. The examination is done in |
| 1176 |
% character-by-character manner by |\vvb@checkend| because we might have a |
| 1177 |
% partially matching sequence followed by non-verbatim stuff which cannot be |
| 1178 |
% picked before the |\catcode| modification. The comparison for the |
| 1179 |
% examination is done by |\ifx| because we might have an |\active| character. |
| 1180 |
% |
| 1181 |
% If we find the terminator, we call |\end|\Meta{env} to close the |
| 1182 |
% environment. Otherwise, the |\char|-acter `|\|' followed by the partial |
| 1183 |
% matched (possibly empty) sequence followed by the unmatched character are |
| 1184 |
% inserted back. |
| 1185 |
% \end{macro}\end{macro} |
| 1186 |
% |
| 1187 |
% \begin{macrocode} |
| 1188 |
\def\vvb@esc{\let\@tempa\vvb@endenvir \let\@tempb\@empty \vvb@checkend} |
| 1189 |
\def\vvb@checkend#1{\edef\@tempc{\expandafter\@car\@tempa\@nil}% |
| 1190 |
\def\@tempd{#1}\ifx\@tempc\@tempd |
| 1191 |
\edef\@tempa{\expandafter\@cdr\@tempa\@nil}% |
| 1192 |
\ifx\@tempa\@empty |
| 1193 |
\edef\next{\noexpand\end{\nvb@currenvir}}% |
| 1194 |
\else |
| 1195 |
\edef\@tempb{\@tempb#1}\let\next\vvb@checkend \fi |
| 1196 |
\else \def\next{\char`\\\@tempb#1}\fi |
| 1197 |
\next} |
| 1198 |
|
| 1199 |
%%^L |
| 1200 |
% \end{macrocode} |
| 1201 |
% |
| 1202 |
% |
| 1203 |
% |
| 1204 |
% \subsubsection{Verbatim Input} |
| 1205 |
% \label{sec:imp-var-input} |
| 1206 |
% |
| 1207 |
% \begin{macro}{\newverbatiminput} |
| 1208 |
% \begin{macro}{\renewverbatiminput} |
| 1209 |
% \begin{macro}{\vvb@Xnewverbatim} |
| 1210 |
% The macros |\newverbatiminput| and |\renewverbatiminput| call the common |
| 1211 |
% macro |\nvb@newverbatim| described in \S\ref{sec:imp-new} to check the |
| 1212 |
% existence of optional arguments, making |\nvb@Xnewverbatim| |\let|-equal |
| 1213 |
% to their own version, |\nvb@xnewvinput|. |
| 1214 |
% \end{macro}\end{macro}\end{macro} |
| 1215 |
% |
| 1216 |
% \begin{macrocode} |
| 1217 |
|
| 1218 |
%% Verbatim Input |
| 1219 |
|
| 1220 |
\def\newverbatiminput{\let\nvb@newenv\newenvironment |
| 1221 |
\let\nvb@Xnewverbatim\vvb@xnewvinput \nvb@newverbatim} |
| 1222 |
\def\renewverbatiminput{\let\nvb@newenv\renewenvironment |
| 1223 |
\let\nvb@Xnewverbatim\vvb@xnewvinput \nvb@newverbatim} |
| 1224 |
|
| 1225 |
% \end{macrocode} |
| 1226 |
% |
| 1227 |
% \begin{macro}{\nvb@xnewvinput} |
| 1228 |
% \begin{macro}{\nvb@xnewvinputnodef} |
| 1229 |
% \begin{macro}{\nvb@xnewvinputdefault} |
| 1230 |
% The macro |\nvb@xnewvinput| defines environments of weird names, |
| 1231 |
% \meta{command} name followed by a space and a `|*|' for starred-version. |
| 1232 |
% The \meta{command} itself is defined to call |\begin|\Meta{env} or |
| 1233 |
% |\begin{|\meta{env}|*}|, where \meta{env} is what we now define, according |
| 1234 |
% to the existence of `|*|' following the \meta{command}. |
| 1235 |
% |
| 1236 |
% Prior to defining \meta{env}, we check if the optional \meta{n-args} is |
| 1237 |
% zero, and makes it one if so for the argument \meta{file}. We also check |
| 1238 |
% the existence of the \meta{default} argument, because if omitted |
| 1239 |
% \meta{file} is the first argument as |\vvb@xnewvinputnodef| defines, while |
| 1240 |
% the second otherwise as |\vvb@xnewvinputdefault| does. The core of the |
| 1241 |
% definition is in the \meta{beg-def-inner} part given to |
| 1242 |
% |\nvb@xnewverbatim|. In this part, we redefine |\nvb@xverbatim| as |
| 1243 |
% |\end|\Meta{env} and then |\input| the \meta{file} so that the environment |
| 1244 |
% is immediately closed after the \meta{file} is read verbatim. |
| 1245 |
% \end{macro}\end{macro}\end{macro} |
| 1246 |
% |
| 1247 |
% \begin{macrocode} |
| 1248 |
\def\vvb@xnewvinput#1[#2][#3]{% |
| 1249 |
\edef\@tempa{\expandafter\@cdr\string#1\@nil\space} |
| 1250 |
\edef#1{\noexpand\@ifstar{\noexpand\begin{\@tempa*}}% |
| 1251 |
{\noexpand\begin{\@tempa}}}% |
| 1252 |
\ifnum#2=\z@ |
| 1253 |
\edef\@tempa{\noexpand\nvb@xnewverbatim{\@tempa}[1]} |
| 1254 |
\else |
| 1255 |
\edef\@tempa{\noexpand\nvb@xnewverbatim{\@tempa}[#2]}\fi |
| 1256 |
\def\@tempb{#3}\ifx\@tempb\@empty \let\@tempb\vvb@xnewvinputnodef |
| 1257 |
\else \let\@tempb\vvb@xnewvinputdefault \fi |
| 1258 |
\@tempb[#3]} |
| 1259 |
\def\vvb@xnewvinputnodef[#1]#2#3{% |
| 1260 |
\@tempa[#1]{#2}{#3% |
| 1261 |
\edef\nvb@xverbatim{\noexpand\end{\nvb@currenvir}}\input{##1}}} |
| 1262 |
\def\vvb@xnewvinputdefault[#1]#2#3{% |
| 1263 |
\@tempa[#1]{#2}{#3% |
| 1264 |
\edef\nvb@xverbatim{\noexpand\end{\nvb@currenvir}}\input{##2}}} |
| 1265 |
% \end{macrocode} |
| 1266 |
% |
| 1267 |
% \iffalse |
| 1268 |
%</varvbtm> |
| 1269 |
% \fi |
| 1270 |
% |
| 1271 |
% |
| 1272 |
% |
| 1273 |
% \IndexPrologue{\newpage\section*{Index} |
| 1274 |
% Italicized number refers to the page where the specification and usage of |
| 1275 |
% corresponding entry is described, while underlined is for the |
| 1276 |
% implementation of the entry.} |
| 1277 |
% \Finale |
| 1278 |
% \GlossaryPrologue{\newpage\section*{Revision History}} |
| 1279 |
% \PrintChanges |
| 1280 |
\endinput |