Debian Codegraph @

texmf-dist/source/latex/mucproc/mucproc.dtx

raw
1 % \iffalse meta-comment
2 %
3 % Copyright (C) 2017 by Marei Peischl <[email protected]>
4 %
5 % This work may be distributed and/or modified under the
6 % conditions of the LaTeX Project Public License, either version 1.3
7 % of this license or (at your option) any later version.
8 % The latest version of this license is in
9 % http://www.latex-project.org/lppl.txt
10 % and version 1.3 or later is part of all distributions of LaTeX
11 % version 2005/12/01 or later.
12 %
13 % This work has the LPPL maintenance status `maintained'.
14 %
15 % The Current Maintainer of this work is Marei Peischl.
16 %
17 % This work consists of the files mucproc.dtx and mucproc.ins
18 % and the derived files mucproc.cls and mucfontsize10pt.clo.
19 %
20 % \fi
21 %
22 % \iffalse
23 %
24 %<*!font-clo>
25 \def\mucprocVersion{1.02}
26 %<*driver>
27 \ProvidesFile{mucproc.dtx}[2017/03/09 v\mucprocVersion\ MuC-conference proceedings]
28 %</driver>
29
30 %<*class>
31 \NeedsTeXFormat{LaTeX2e}[2014/05/01]
32 \ProvidesClass{mucproc}
33 [2017/03/09 v\mucprocVersion\ conference proceedings for the German MuC-conference]
34 %</class>
35 %
36 %<*driver>
37 \documentclass[english]{ltxdoc}
38 \usepackage{selinput}\SelectInputMappings{adieresis={ä},germandbls={ß}}
39 \usepackage[T1]{fontenc}
40 \usepackage{babel}
41 \EnableCrossrefs
42 \CodelineIndex
43 \RecordChanges
44 \usepackage{xparse}
45 \makeatletter
46 % Redefine theglossary environment to create single column change history
47 \renewenvironment{theglossary}{%
48 \glossary@prologue%
49 \GlossaryParms\let\item\@idxitem\ignorespaces}{}
50 \makeatother
51 \begin{document}
52 \DocInput{mucproc.dtx}
53 \end{document}
54 %</driver>
55 % \fi
56 %
57 %
58 % \CharacterTable
59 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
60 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
61 % Digits \0\1\2\3\4\5\6\7\8\9
62 % Exclamation \! Double quote \" Hash (number) \#
63 % Dollar \$ Percent \% Ampersand \&
64 % Acute accent \' Left paren \( Right paren \)
65 % Asterisk \* Plus \+ Comma \,
66 % Minus \- Point \. Solidus \/
67 % Colon \: Semicolon \; Less than \<
68 % Equals \= Greater than \> Question mark \?
69 % Commercial at \@ Left bracket \[ Backslash \\
70 % Right bracket \] Circumflex \^ Underscore \_
71 % Grave accent \` Left brace \{ Vertical bar \|
72 % Right brace \} Tilde \~}
73 %
74 %
75 % \changes{v1.0}{2017/02/20}{Initial version}
76 % \changes{v1.01}{2017/03/01}{Small bugfix concerning the support of English as main language}
77 %
78 % \GetFileInfo{mucproc.dtx}
79 %
80 % \DoNotIndex{\newcommand,\newenvironment}
81 %
82 %
83 % \title{The \textsf{mucproc} class\thanks{This document
84 % corresponds to \textsf{mucproc}~\fileversion, dated \filedate.}}
85 % \author{Marei Peischl \\ \texttt{[email protected]}}
86 % \date{March 9, 2017}
87 % \maketitle
88 %
89 % \section{Introduction}
90 %
91 % The \textsf{mucproc} class provides a document class which allows to use the \LaTeX{} document preparation system for contributions to the German ``Mensch und Compuer 2017'' conference.
92 % It corresponds to the Word-template offered via the conference's homepage \url{http://muc2017.mensch-und-computer.de/} for the year 2017.
93 % By offering this document class and an additional usage demonstration file (\texttt{mucproc\_demo.tex}) we want to offer an easy to use possibility to prepare conference contributions in \LaTeX.
94 %
95 % The goal of this document class is to create PDF-files which look like those created with the Word-template.
96 % Most of the contributions are still expected to be typeset in Word, that's why the \textsf{mucproc} class uses the historically grown formatting guidelines which have been created for Word-Users.
97 % Therefore the settings of this document class might not always be the typographically best.
98 %
99 % \section{Usage}
100 % A complete example of use can be found on the github repository for this project: \url{https://github.com/Blubu/mucproc/}
101 %
102 % \textsf{mucproc} already configures all features needed for the usually required elements of a contribution to the MuC-conference. It loads a bunch of packages to simplify this process. Though the Syntax of the document using this class doesn't differ from classic \LaTeX{} documents.
103 %
104 % \subsection{Class options}
105 % \DescribeMacro{\documentclass}
106 % Start your document by loading the \textsf{mucproc} class with an option for the document's main language.
107 % The class will expect either \texttt{ngerman} or \texttt{english} as main language.
108 % Otherwise an error message will be thrown.
109 %
110 % For the language settings this class uses the \textsf{babel} package and loads \textsf{csquotes} for context sensitive quotations. The language option will also be used to configure the bibliography.
111 %
112 % The other class option which can be used by authors is \texttt{anonymous=\textit{truth value}}. It activates the anonymous-mode which shall be used for the submission to the review process before a contribution may be accepted.
113 % This option disables the author-field for the title and the additional author information as will be described later.
114 %
115 % The third type of class option is not meant to be used by the authors themselves.
116 % It rather provides a possibility to force a document to be compiled in the final mode and enables some additional features of the document class.
117 % The option \texttt{forcefinal=\textit{truth value}} will be used for a recompilation process for the preparation of the final version for the publication process of the proceedings.
118 % It can be passed to the class via command line interface and will disable a manually set anonymous-mode.
119 %
120 % \subsection{Title creation}
121 %
122 % \DescribeMacro{\title}
123 % The |\title| command behaves identically to most popular document classes. There may be line breaks created with |\\| or |\newline| inside the argument.
124 % Other formatting macros shall not be used, since this argument is also used for the metadata of the final PDF-file.
125 %
126 % \DescribeMacro{\author}
127 % \DescribeMacro{\and}
128 % The |author| macro can also be used similar to standard \LaTeX{} documents.
129 % If the document has more than one author, the names shall be separated with |\and|.
130 % \DescribeMacro{\thanks}
131 % The |\thanks| command shall be used to add the corresponding institution.
132 % It can be used similar to the standard \LaTeX{} definition, though it also can process an optional argument.
133 % The optional argument takes a label to reference an institution of another author.
134 % This prevents multiple mention of institutions.
135 % \DescribeMacro{\thanksref}
136 % This macro is used to reference the labels set with the |\thanks| command.
137 % The implementation of the institution reference is very different from the usual label/ref mechanism.
138 % That's why the reference is only defined after the label was set. If the argument of |\thanksref| isn't a known Label an error will occur.
139 %
140 % \begin{verbatim}
141 % \author{John Doe\thanks[inst:1]{Institution 1}\and
142 % Jane Doe\thanks{Institution 2}\and
143 % John Doe II\thanksref{inst:1}
144 % \end{verbatim}
145 % In contrast to the standard classes, \textsf{mucproc} doesn't place the footnotes created by |\thanks| on the bottom of the page, they are positioned directly below the author field of the title.
146 %
147 % Other possible entries for the title (e.\,g. |\date|)are ignored.
148 %
149 % \DescribeMacro{\maketitle} The title has to be created by calling the |\maketitle| command as usual.
150 %
151 % \subsection{Additional author information}
152 % For the final version the authors of contributions have the possibility to add additional information about all authors. For this the \textsf{mucproc} class provides the |authoraddendum| environment.
153 %
154 % \DescribeEnv{authoraddendum}
155 % This environment can take up to 2 arguments, one optional containing the path to a corresponding photograph and a mandatory one for the Authors name.
156 % \begin{verbatim}
157 % \begin{authoraddendum}[john_doe.png]{Doe, John}
158 % Text describing the author.
159 % \end{authoraddendum}
160 % \end{verbatim}
161 % If the optional picture argument ist left empty the text will be typeset over the whole |\textwidth|, otherwise there will be a 3\,cm column on the left side containing the photograph.
162 %
163 % \StopEventually{\PrintChanges\PrintIndex}
164 %
165 % \section{Implementation}
166 % This section contains the source code to the \textsf{mucproc.cls}. It will be tried to explain how the class breaks the tasks.
167 % \subsubsection{Compatibility mode}
168 % This document class intends to be compiled on as many different distributions as possible. Basically this class compiles on releases newer than 2014/05/01 without errors.
169 % Nevertheless some specific fallback tests require a the \textsf{expl3} package version of 2015/09/07 or newer.
170 % A compatibility mode test is implemented first and deactivates all problematic features of the class.
171 % \begin{macrocode}
172 \RequirePackage{expl3}
173 \ExplSyntaxOn
174 \bool_new:N \g_MUC@compatibility_mode
175 \@ifpackagelater{expl3}{2015/09/07}{
176 \bool_gset_false:N \g_MUC@compatibility_mode
177 }{
178 \msg_new:nnn {mucproc}{compatibility}{
179 Your~ LaTeX-Distribution~ seems~ to~ be~ outdated.\\\\
180 Enabling~ compatibility~ Mode.\\\\
181 Some~ features~ won't~ be~ available.
182 }
183 \msg_warning:nn {mucproc}{compatibility}
184 \bool_gset_true:N \g_MUC@compatibility_mode
185 }
186
187 \RequirePackage{xparse}
188 % \end{macrocode}
189 % The boolean |\g_MUC@compatibility_mode| is set true, if the \textsf{expl3} is older than required.
190 % \subsection{Class options}
191 % The key-value class options are implemented using the \textsf{scrbase} package defining a Family called \texttt{MUC}.
192 % \begin{macrocode}
193 \RequirePackage{scrbase}
194 \DefineFamily{MUC}
195 \DefineFamilyMember{MUC}
196 \bool_new:N \g_MUC@pdfa_bool
197 % \end{macrocode}
198 % The Options |anonymous| and |forcefinal| are implemented using the basic \textsf{scrbase} mechanism for boolean options:
199 % \begin{macrocode}
200 \FamilyBoolKey{MUC}{anonymous}{MUC@anonymous}
201 \FamilyBoolKey{MUC}{forcefinal}{MUC@final}
202 \FamilyBoolKey{MUC}{headline}{MUC@headline}
203 \FamilyBoolKey{MUC}{copyrightinfo}{MUC@copyrightinfo}
204 \FamilyBoolKey{MUC}{pagestyle}{MUC@pagestyle}
205 % \end{macrocode}
206 % Set up the default boolean values before processing options.
207 % \begin{macrocode}
208 \MUC@headlinetrue
209 \MUC@copyrightinfotrue
210 \MUC@pagestyletrue
211
212 \FamilyProcessOptions{MUC}
213 % \end{macrocode}
214 % The |pagestyle| settings can be disabled if |headline| and |copyrightinfo| are set false.
215 % \begin{macrocode}
216 \ifMUC@headline
217 \else
218 \ifMUC@copyrightinfo
219 \else
220 \MUC@pagestylefalse
221 \fi
222 \fi
223 % \end{macrocode}
224 % If the |forcefinal| option is set, all global options containing the substring ``draft'' or both of the substrings``final'' and ``false'' are removed to avoid any global draft mode.
225 % \begin{macrocode}
226 \ifMUC@final
227 \bool_if:NTF \g_MUC@compatibility_mode {
228 \msg_new:nnn {mucproc} {compatibility-final-error} {
229 forcefinal~ is~ not~ possible~ in~ compatibility~ mode.\\\\
230 Update~ your~ TeX~ distribution~ and retry!}
231 \msg_error:nn {mucproc} {compatibility-final-error}
232
233 }{
234 \sys_if_engine_luatex:F {
235 \msg_new:nnn {mucproc} {luatex-required} {
236 forcefinal~ requires~ LuaLaTeX~ for~ correct~ PDF/A~ output.\\\\
237 Remove~ forcefinal~ option~ or~ change~ the~ compiler.
238 }
239 \msg_error:nn {mucproc} {luatex-required}
240 }
241 \clist_new:N \l_MUC@globalopts_clist
242
243 \msg_new:nnn {mucproc} {force-final} {
244 forcefinal~ option~ is~ enabled.\\\\
245 Ignoring~ all~ global~ complementary~ options.}
246 \msg_warning:nn {mucproc} {force-final}
247 \msg_new:nnn {mucproc} {remove-draft}{
248 forcefinal~ enabled:~ The~ global~ Option~ #1~ is~ ignored,~
249 because~ it~ seems~ to~ activate draft~ mode!}
250
251 \exp_args:Nx \clist_map_inline:nn {\@classoptionslist} {
252 \tl_if_in:nnTF {#1} {draft}
253 {\msg_warning:nnx {mucproc} {remove-draft} {#1}}
254 {\clist_put_right:Nn \l_MUC@globalopts_clist {#1}}
255 \tl_if_in:nnTF {#1} {final}
256 {\tl_if_in:nnTF {#1} {false}
257 {\msg_warning:nnx {mucproc} {remove-draft} {#1}}
258 {\clist_put_right:Nn \l_MUC@globalopts_clist {#1}}
259 }
260 {\clist_put_right:Nn \l_MUC@globalopts_clist {#1}}
261 }
262
263
264 \edef\@classoptionslist{\clist_use:Nn \l_MUC@globalopts_clist {,}}
265 % \end{macrocode}
266 % Additionally enable PDF/A-mode and metadata generation and disable anonymization.
267 % \begin{macrocode}
268 \bool_gset_true:N \g_MUC@pdfa_bool
269 \MUC@anonymousfalse
270 }
271 \fi
272 % \end{macrocode}
273 % \subsection{Basic Setup}
274
275
276
277
278 % The next step is loading \textsf{scrartcl} as base class. According to the formatting rules we pass some options and use the \texttt{mucfontsize10pt.clo} file for setting up the font sizes.
279 % \begin{macrocode}
280 \newcommand*{\@fontsizefilebase}{mucfontsize}
281 \PassOptionsToClass{abstract=true,parskip=full,fontsize=10pt,
282 twoside=semi}{scrartcl}
283 \LoadClass{scrartcl}
284 \setparsizes{0pt}{7pt plus 7 pt}{1em plus 1 fill}
285 \raggedbottom
286 % \end{macrocode}
287 %
288 % Now the other required packages can be loaded.
289 % \begin{macrocode}
290 \RequirePackage{graphicx}
291 \RequirePackage{babel}
292 \PassOptionsToPackage{babel}{csquotes}
293 \bbl@frenchspacing
294 \RequirePackage{csquotes}
295
296 \RequirePackage{geometry}% setup margins
297 \geometry{paper=a4paper,top=4.8cm, bottom=5.7cm,left=3.8cm,right=4cm,
298 head=12.045pt,headsep=\dimexpr1cm-12.045pt\relax}
299 % \end{macrocode}
300
301 % \subsection{Bibliography setup}
302 % The bibliography will be created using \textsf{biblatex} with \textsf{biber} as backend.
303 % \begin{macrocode}
304 \PassOptionsToPackage{backend=biber}{biblatex}
305 \PassOptionsToPackage{citestyle=authoryear-comp}{biblatex}
306 \PassOptionsToPackage{bibstyle=apa}{biblatex}
307 \RequirePackage{biblatex}
308 % \end{macrocode}
309 % The APA-style requires a Language mapping. It is set for both supported main languages.
310 % \begin{macrocode}
311 \DeclareLanguageMapping{english}{english-apa}
312 \DeclareLanguageMapping{ngerman}{ngerman-apa}
313 % \end{macrocode}
314 % Set up additional Settings to get an equal output, like the Word-version.
315 % \begin{macrocode}
316 \defcaptionname{ngerman,german}{\refname}{Literaturverzeichnis}
317
318 \renewcommand*{\nameyeardelim}{\addcomma\space}
319 % \end{macrocode}
320 %
321 % \subsection{Font Choice}
322 % The formatting guidelines request Times New Roman as font. Since on most operating systems it is installed as a system font.
323 % We check if it is present and the currently used compiler supports the \textsf{fontspec} package.
324 % \begin{macrocode}
325 \bool_new:N \g_MUC@fontspec_bool
326 % \end{macrocode}
327 % These tests basically use the \textsf{expl3} methods, but also a fallback for older distributions is implemented to support older distributions. First we implement the compatibility-version.
328 % \begin{macrocode}
329 \bool_if:NTF \g_MUC@compatibility_mode {
330 % \end{macrocode}
331 % To test if PDF\TeX{} is used, we check if |\pdfmatch| is defined.
332 % \begin{macrocode}
333 \expandafter\ifx\csname pdfmatch\endcsname\relax
334 \else
335 \PassOptionsToPackage{utf8}{inputenc}
336 \RequirePackage{inputenc}
337 \fi
338 \bool_gset_false:N \g_MUC@fontspec_bool
339 % \end{macrocode}
340 % Next step is the mechanism to check if the used compiler supports \textsf{fontspec}.
341 % \begin{macrocode}
342 }{
343 \sys_if_engine_luatex:TF {
344 \bool_gset_true:N \g_MUC@fontspec_bool
345 }{
346 \sys_if_engine_xetex:TF{
347 \bool_gset_true:N \g_MUC@fontspec_bool
348 }{
349 \sys_if_engine_pdftex:T {
350 \bool_gset_false:N \g_MUC@fontspec_bool
351 \PassOptionsToPackage{utf8}{inputenc}
352 \RequirePackage{inputenc}
353 }
354 }
355 }
356 }
357 % \end{macrocode}
358 % The font fallback is saved in a macro. This prevents the code to be written twice. It is executed when either \textsc{fontspec} is not supported or Times New Roman isn't installed.
359 % \begin{macrocode}
360 \cs_new:Nn \MUC@font_Fallback: {
361 \PassOptionsToPackage{T1}{fontenc}
362 \RequirePackage{fontenc}
363 \IfFileExists{txfonts.sty}{\RequirePackage{txfonts}}{}
364 }
365
366 \if_bool:N \g_MUC@fontspec_bool
367 \RequirePackage{fontspec}
368 \fontspec_font_if_exist:nTF {Times~ New~ Roman}
369 {\setmainfont{Times~ New~ Roman}}
370 {\MUC@font_Fallback:}
371 \else:
372 \MUC@font_Fallback:
373 \fi:
374 % \end{macrocode}
375
376 % \subsection{PDF/A-mode and metadata creation}
377 % The PDF archiving mode is created using the \textsf{pdfx} package. For the correct creation the PDF/A format and the \texttt{.xmpdata} file for metadata specific system settings may be required.
378 % Therefore this mode is only active if the |forcefinal| mode is enabled.
379 % \begin{macrocode}
380 \if_bool:N \g_MUC@pdfa_bool
381 \PassOptionsToPackage{a-1b}{pdfx}
382 \RequirePackage{pdfx}
383 \hypersetup{hidelinks}
384 \iow_new:N \MUC@xmpdata_stream
385 \iow_open:Nn \MUC@xmpdata_stream {\jobname.xmpdata}
386 \tl_new:N \g_MUC@xmp_title
387 \tl_new:N \g_MUC@xmp_author
388
389 \newcommand*{\MUC@passTitleData}{
390 \begingroup
391 \def\newline{}
392 \def\\{}
393 \xdef\MUC@author{\@author}
394 \xdef\MUC@title{\@title}
395 \cs_set:Npn \and {\exp_not:n {\exp_not:N \sep}}
396 \tl_gset:Nx \g_MUC@xmp_title {\@title}
397 \tl_gset:Nx \g_MUC@xmp_author {\@author}
398 \endgroup
399 \iow_now:Nx \MUC@xmpdata_stream
400 {
401 \exp_not:N \Title{\tl_use:N \g_MUC@xmp_title}
402 ^^J
403 \exp_not:N \Author{\tl_use:N \g_MUC@xmp_author}
404 ^^J
405 \exp_not:N \Org{Mensch~ und~ Computer~ 2017}
406 }
407 }
408 % \end{macrocode}
409 % If no PDF/A shall be created, the |\maketitle| data will only be passed to the headline.
410 % \begin{macrocode}
411 \else:
412 \msg_new:nnn {mucproc} {no-pdfa}{The~ mucproc~ class~ won't~ create~ PDF/A-mode.}
413 \msg_info:nn {mucproc} {no-pdfa}
414 \newcommand*{\MUC@passTitleData}{
415 \begingroup
416 \def\newline{}
417 \def\\{}
418 \xdef\MUC@author{\@author}
419 \xdef\MUC@title{\@title}
420 \endgroup
421 }
422 \fi:
423 % \end{macrocode}
424 %
425 % \section{Title creation}
426 % The title creation process also invokes the mechanism to pass the title data to headline and metadata.
427 % It can be initialized calling |\maketitle|.
428 % \subsection{Institution footnotes}
429 % The MuC formatting guidelines request the institutions typeset similar to footnotes, though they shouldn't be placed at the bottom of the page.
430 % The standard footnote mechanism is quite complicated, though we use the \LaTeX3 clist datatype to create a special mechanism implementing these ``footnotes''.
431 % The mechanism is called inside |\maketitle| but created outside of that macro definition to leave the code more readable.
432 %
433 % All Arguments of the |\thanks| command will be saved in the comma list called |\l_MUC@thanks_clist|.
434 % \begin{macrocode}
435 \clist_new:N \l_MUC@thanks_clist
436 % \end{macrocode}
437 % The value of the footnote counter has to be expanded when the |\thanks| macro is called. Otherwise the footnotemarks might not match.
438 % To achieve this expansion order the |\MUC@thanks:nn| command takes the counter value as first argument and the institution name as second.
439 % \begin{macrocode}
440 \cs_set:Nn \MUC@thanks:nn {
441 \clist_gput_right:Nn \l_MUC@thanks_clist
442 {{#2\def\@thefnmark{#1}\@makefnmark}
443 }}
444 % \end{macrocode}
445 % Inside the real |\thanks| macro the first argument will be expanded directly.
446 % Additionally |\MUC@thanks| sets its own first (optional) argument as a label for the property list |\g_MUC@InstRef_prof|.
447 % This allows the footnote counter value to be accessed through the label.
448 % \begin{macrocode}
449 \bool_if:NTF \g_MUC@compatibility_mode
450 {\NewDocumentCommand{\MUC@thanks}{om}{
451 \footnotemark%
452 \exp_args:Nx \MUC@thanks:nn {\thefootnote}{#2}
453 }
454 }{
455 \NewDocumentCommand{\MUC@thanks}{om}{
456 \footnotemark%
457 \IfNoValueF{#1}{
458 \prop_if_exist:NF \g_MUC@InstRef_prop {
459 \prop_new:N \g_MUC@InstRef_prop}
460 \prop_put:Nnx \g_MUC@InstRef_prop {#1} {\thefootnote}
461 }
462 \exp_args:Nx \MUC@thanks:nn {\thefootnote}{#2}
463 }
464 }
465 % \end{macrocode}
466 % The mechanism seems to work like the typical \LaTeX{} label/ref though no backref is supported.
467 % To inform the user about this an error will be thrown when a label is accessed which does not exist.
468 % \begin{macrocode}
469 \bool_if:NTF \g_MUC@compatibility_mode {
470 \msg_new:nnn {mucproc} {thanksref-unavailable} {
471 Compatibilty~ mode~ enabled.\\\\
472 The~ institution~ reference~ mechanism~ is~ not available.\\\\
473 Update~ Your~ TeX~ distribution~ to~ be~ able~
474 to~ use~ this~ feature.
475 }
476 \msg_warning:nn {mucproc} {thanksref-unavailable}
477 \newcommand\MUC@thanksref[1]{$\dagger$}
478 }{
479 \msg_new:nnn {mucproc} {thanks-label-missing} {
480 No~ institute~ labeled~ '#1'.\\\\
481 Add~ a~ label~ using~ the~ optional~ argument~
482 of~ the~ \thanks~ command.
483 }
484
485 \NewDocumentCommand\MUC@thanksref{m}{
486 \prop_if_in:NnTF \g_MUC@InstRef_prop {#1} {
487 \def\@thefnmark{\prop_item:Nn \g_MUC@InstRef_prop {#1}}%
488 \@makefnmark
489 }
490 {\msg_error:nn {mucproc} {thanks-label-missing}}
491 }
492 }
493 % \end{macrocode}
494 % After the title has been set, the institutional notes shall be typeset.
495 % \begin{macrocode}
496 \newcommand*\typeset@MUC@thanks {
497 \clist_use:Nn \l_MUC@thanks_clist {\rule{0pt}{0pt}\\}}
498 % \end{macrocode}
499 % \subsection{Typesetting the title}
500 % As written before, |\maketitle| has to execute additional jobs.
501 % Since the title fields also can contain other macros or even line breaks, the expansion process has to be controlled carefully.
502 % \begin{macrocode}
503 \renewcommand*{\maketitle}{
504 \begingroup
505 % \end{macrocode}
506 % Before passing the data to the headlines or metadata using the earlier defined |\MUC@passTitleData| we need some redefinitions for the commands, which can be used inside the title fields.
507 % \begin{macrocode}
508 \DeclareExpandableDocumentCommand{\thanks}{om}{}
509 \def\thanksref##1{}
510 \def\and{\unskip,~\ignorespaces}
511 \MUC@passTitleData
512 % \end{macrocode}
513 % Not the actual title creation begins redefining the user macros to those prepared for that purpose.
514 % \begin{macrocode}
515 \let\titlepage@restore\relax
516 \renewcommand*\thefootnote{\@arabic\c@footnote}
517 \let\thanks\MUC@thanks
518 \let\thanksref\MUC@thanksref
519 % \end{macrocode}
520 % Now only the title fields have to be typeset.
521 % \begin{macrocode}
522 \global\@topnum=\z@
523 \setparsizes{\z@}{\z@}{\z@\@plus 1fil}\par@updaterelative
524 \null
525 \vskip 41pt
526 {\usekomafont{title}{\Huge \@title \par}}%
527 {\ifx\@subtitle\@empty\else\vskip .5em\usekomafont{subtitle}%
528 \Large\@subtitle\par\fi}%
529 \vskip 7pt
530 {%
531 \usekomafont{author}{%
532 \lineskip .5em%
533 \@author
534 \par
535 }%
536 }%
537 \par
538 \vskip 8pt
539 \bool_if:NTF \g_MUC@compatibility_mode
540 {\thispagestyle{empty}}
541 {\thispagestyle{MUC@titlepagestyle}}
542 \typeset@MUC@thanks
543 \par
544 \vspace{8pt}
545 \endgroup
546 \setcounter{footnote}{0}%
547 \global\let\and\relax
548 \global\let\thanksref\relax
549 }
550 % \end{macrocode}
551
552 % \subsection{Anonymization and additional author information}
553 % The anonymization is realized checking the setting using the corresponding if-expression.
554 % The |\@author| information to the language dependent meaning of |\MUCanonymousauthor|.
555 % \begin{macrocode}
556 \ifMUC@anonymous
557 \providecaptionname{english}{\MUCanonymousauthor}{anonymous~ version}
558 \providecaptionname{german,ngerman}{\MUCanonymousauthor}{Anonymisierte~ Fassung}
559 \def\@author{\MUCanonymousauthor}
560 \def\author#1{\relax}
561 % \end{macrocode}
562 % \changes{v1.02}{2017/03/09}{Bugfix of anonymous mode}
563 % The |authoraddendum| environment shall create no output, if the anonymous mode is active.
564 % \begin{macrocode}
565 \RequirePackage{comment}
566 \excludecomment{authoraddendum}
567 \else
568 % \end{macrocode}
569 % \begin{environment}{authoraddendum}
570 % The Implementation works via the typical xparse mechanisms.
571 % \begin{macrocode}
572 \NewDocumentEnvironment{authoraddendum}{d<>om}{
573 \par
574 \IfNoValueTF{#2}{
575 {\usekomafont{authoraddendum}#3}\par\medskip
576 }{
577 \begin{minipage}[t]{3cm}
578 \vspace{0pt}
579 \IfNoValueTF{#1}{
580 \includegraphics[width=\linewidth]{#2}
581 }{
582 \includegraphics[#1]{#2}
583 }
584 \end{minipage}\hfill%
585 \begin{minipage}[t]{\dimexpr\linewidth-3.5cm\relax}
586 \vspace{0pt}
587 {\usekomafont{authoraddendum}#3}\par\medskip%
588 }
589 \usekomafont{authoraddendum}\ignorespaces
590 }{
591 \IfNoValueF{#2}{\end{minipage}}
592 \par
593 }
594 \fi
595 % \end{macrocode}
596 % \changes{v1.02}{2017/03/09}{Fix boxwidth to no longer generate an overfull hbox.}
597 % \end{environment}
598 %
599 %
600
601 % \subsection{Visible adjustment of sizes and spacing}
602 % To match the Word template we have to adjust a bunch of spacing settings as well as font sizes. The easiest way to achieve this is using the KOMA-Script mechanisms.
603 % \subsection{Structure Settings}
604 % Word indents the section headings independent from the width of the section number. To achieve this a macro called |\MUC@sectionnumberbox| is created and all section formats are redefined.
605 % In compatibility mode these settings will be ignored.
606 % \begin{macrocode}
607 \reverse_if:N \if_bool:N \g_MUC@compatibility_mode
608 \newcommand*{\MUC@sectionnumberbox}[1]{\makebox[28bp][l]{#1\autodot}}
609 \renewcommand*{\sectionformat}{
610 \MUC@sectionnumberbox{\thesection}}
611 \renewcommand*{\subsectionformat}{
612 \MUC@sectionnumberbox{\thesubsection}}
613 \renewcommand*{\subsubsectionformat}{
614 \MUC@sectionnumberbox{\thesubsubsection}}
615 % \end{macrocode}
616 % The spacing around the headings also has to be adjusted:
617 % \begin{macrocode}
618 \RedeclareSectionCommand[afterskip=1.5ex plus .2ex,%
619 beforeskip=-3.6ex plus -1ex minus -.2ex]{section}
620 \RedeclareSectionCommand[afterskip=.5ex plus .2ex,%
621 beforeskip=-1ex plus -1ex minus -.2ex]{subsection}
622 \RedeclareSectionCommand[afterskip=.5ex plus .2ex,%
623 beforeskip=-1ex plus -1ex minus -.2ex]{subsubsection}
624 \RedeclareSectionCommand[afterskip=1em,%
625 beforeskip=1ex plus 1ex minus .2ex]{paragraph}
626 \RedeclareSectionCommand[afterskip=1em,%
627 beforeskip=1ex plus 1ex minus .2ex]{subparagraph}
628 \fi:
629 \ExplSyntaxOff
630 % \end{macrocode}
631 % The font settings will be done together with all other font settings in the next subsection.
632 %
633 % \subsection{Font Settings}
634 % Adjusting the font settings to match the Word version:
635 % \begin{macrocode}
636 \setkomafont{disposition}{}
637 \setkomafont{title}{}
638 \setkomafont{author}{\large}
639 \setkomafont{section}{\LARGE}
640 \setkomafont{subsection}{\Large}
641 \setkomafont{caption}{\footnotesize\itshape}
642 \setkomafont{captionlabel}{\usekomafont{caption}}
643 \newkomafont{abstractcontent}{\small}
644 \newkomafont{abstract}{\normalsize\bfseries}
645 \newkomafont{authoraddendum}{\small}
646 % \end{macrocode}
647 %
648 % \subsection{Abstract}
649 % The |abstract| environment is redefined to match the Word version.
650 % \begin{macrocode}
651 \renewenvironment{abstract}{%
652 \setparsizes{0pt}{4pt}{0pt plus 1 fill}{%
653 \usekomafont{abstract}%
654 \abstractname}\par%
655 \usekomafont{abstractcontent}}{}
656 % \end{macrocode}
657
658 % \subsection{Pagestyle}
659 % The demo document shows a headline containing author and document title. To achieve this that information was passed inside the |\maketitle| macro and saved in the |\MUC@author| and |\MUC@title| macros.
660 % There is also a possibility to set a copyright-information box similar to the Word template.
661 % \begin{macrocode}
662 \ifMUC@pagestyle
663 \PassOptionsToPackage{headsepline}{scrlayer-scrpage}
664 \RequirePackage{scrlayer-scrpage}
665 \ifMUC@copyrightinfo
666 % \end{macrocode}
667 % Nowadays it is possible to write the complete content for the scrlayers directly inside the definition.
668 % To support older distributions as well the content is wrapped into a box.
669 % The most absolute length values have been extracted from different measurements to match the Word version.
670 % \begin{macrocode}
671 \newsavebox\MUC@copyrightbox
672 \begin{lrbox}{\MUC@copyrightbox}
673 \setlength{\fboxrule}{.7bp}%
674 \setlength{\fboxsep}{6.5pt}%
675 \fbox{\hspace*{.8pt}\parbox[t][\dimexpr2cm-2\fboxsep
676 -2\fboxrule\relax][t]{%
677 \dimexpr\textwidth-2\fboxsep-2\fboxrule%
678 -1.6pt\relax}{%
679 Platzhalter für DOI und ggf. Copyright Text.
680 (Bitte nicht entfernen).\par
681 \vspace{7pt}
682 Name, Vorname (2017): Titel.%
683 Tagungsband Mensch und Computer 2017.
684 Gesellschaft für Informatik.%
685 DOI: xxxxxx}%
686 }
687 \end{lrbox}
688 \DeclareNewLayer[align=tl,area={\dimexpr 1in
689 + \hoffset + \oddsidemargin\relax}{%
690 \dimexpr\paperheight-3.9cm\relax}{\textwidth}{2cm},
691 contents={\usebox\MUC@copyrightbox}]{copyright}
692 \DeclareNewPageStyleByLayers{MUC@titlepagestyle}{copyright}
693 \else
694 \DeclareNewPageStyleAlias{MUC@titlepagestyle}{empty}
695 \fi
696 \clearpairofpagestyles
697 \ifMUC@headline
698 \lohead{\MUC@title}
699 \rehead{\csname MUC@author\endcsname}
700 \fi
701 \setkomafont{pagehead}{\normalfont}
702 \setkomafont{pagefoot}{}
703 \fi
704 % \end{macrocode}
705 %\iffalse
706 %</!font-clo>
707 %<*font-clo>
708 \ProvidesFile{mucfontsize10pt.clo}[2017/01/30 v1.0 mucproc font size class option (10pt)]
709
710 \def\normalsize{%
711 \@setfontsize\normalsize{10}{12bp}
712 \abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
713 \abovedisplayshortskip \z@ \@plus3\p@
714 \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
715 \belowdisplayskip \abovedisplayskip
716 \let\@listi\@listI
717 }
718 \def\small{%
719 \@setfontsize\small{9bp}{12bp}%
720 \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@
721 \abovedisplayshortskip \z@ \@plus2\p@
722 \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
723 \def\@listi{\leftmargin\leftmargini
724 \topsep 4\p@ \@plus2\p@ \@minus2\p@
725 \parsep 2\p@ \@plus\p@ \@minus\p@
726 \itemsep \parsep}%
727 \belowdisplayskip \abovedisplayskip
728 }
729 \def\footnotesize{%
730 \@setfontsize\footnotesize{\dimexpr18bp-10pt\relax}{\dimexpr21.6bp-12pt\relax}%
731 \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@
732 \abovedisplayshortskip \z@ \@plus\p@
733 \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@
734 \def\@listi{\leftmargin\leftmargini
735 \topsep 3\p@ \@plus\p@ \@minus\p@
736 \parsep 2\p@ \@plus\p@ \@minus\p@
737 \itemsep \parsep}%
738 \belowdisplayskip \abovedisplayskip
739 }
740 \def\scriptsize{\@setfontsize\scriptsize{7}{8}}
741 \def\tiny{\@setfontsize\tiny{5}{6}}
742 \def\large{\@setfontsize\large{12bp}{14.4bp}}
743 \def\Large{\@setfontsize\Large{14bp}{18}}
744 \def\LARGE{\@setfontsize\LARGE{\dimexpr10pt + 6bp\relax}{\dimexpr12pt+7,2bp\relax}}
745 \def\huge{\@setfontsize\huge{20}{24}}
746 \def\Huge{\@setfontsize\Huge{24bp}{30}}
747 \normalsize
748 \setlength\footnotesep {6.65\p@}
749 \setlength{\skip\footins} {9\p@ \@plus 4\p@ \@minus 2\p@}
750 \setlength\floatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
751 \setlength\textfloatsep {20\p@ \@plus 2\p@ \@minus 4\p@}
752 \setlength\intextsep {12\p@ \@plus 2\p@ \@minus 2\p@}
753 \setlength\dblfloatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
754 \setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
755 \setlength\@fptop {0\p@ \@plus 1fil}
756 \setlength\@fpsep {8\p@ \@plus 2fil}
757 \setlength\@fpbot {0\p@ \@plus 1fil}
758 \setlength\@dblfptop {0\p@ \@plus 1fil}
759 \setlength\@dblfpsep {8\p@ \@plus 2fil}
760 \setlength\@dblfpbot {0\p@ \@plus 1fil}
761 \setlength\partopsep {2\p@ \@plus 1\p@ \@minus 1\p@}
762 \def\@listi{\leftmargin\leftmargini
763 \parsep 4\p@ \@plus2\p@ \@minus\p@
764 \topsep 8\p@ \@plus2\p@ \@minus4\p@
765 \itemsep4\p@ \@plus2\p@ \@minus\p@}
766 \let\@listI\@listi
767 \def\@listii {\leftmargin\leftmarginii
768 \labelwidth\leftmarginii
769 \advance\labelwidth-\labelsep
770 \topsep 4\p@ \@plus2\p@ \@minus\p@
771 \parsep 2\p@ \@plus\p@ \@minus\p@
772 \itemsep \parsep}
773 \def\@listiii{\leftmargin\leftmarginiii
774 \labelwidth\leftmarginiii
775 \advance\labelwidth-\labelsep
776 \topsep 2\p@ \@plus\p@\@minus\p@
777 \parsep \z@
778 \partopsep \p@ \@plus\z@ \@minus\p@
779 \itemsep \topsep}
780 \def\@listiv {\leftmargin\leftmarginiv
781 \labelwidth\leftmarginiv
782 \advance\labelwidth-\labelsep}
783 \def\@listv {\leftmargin\leftmarginv
784 \labelwidth\leftmarginv
785 \advance\labelwidth-\labelsep}
786 \def\@listvi {\leftmargin\leftmarginvi
787 \labelwidth\leftmarginvi
788 \advance\labelwidth-\labelsep}
789 \endinput
790 %</font-clo>
791 %\fi
792 % \Finale
793 \endinput