| 1 |
%\iffalse <Not read by DocStrip> |
| 2 |
% Copyright 1997,1998,1999 Christian Cornelssen |
| 3 |
% This program can be redistributed and/or modified under the terms |
| 4 |
% of the LaTeX Project Public License Distributed from CTAN |
| 5 |
% archives in directory macros/latex/base/lppl.txt; either |
| 6 |
% version 1 of the License, or any later version. |
| 7 |
%<*driver> |
| 8 |
\documentclass{ltxdoc} |
| 9 |
\begin{document} |
| 10 |
\DocInput{moresize.dtx} |
| 11 |
\end{document} |
| 12 |
%</driver> |
| 13 |
%\fi |
| 14 |
%\def\basename{moresize} |
| 15 |
%\def\fileversion{v1.9} |
| 16 |
%\def\filedate{1999/07/26} |
| 17 |
%\newcommand\testfile[1][.tex]{\fln{msizetst#1}} |
| 18 |
%\newcommand\fnt[1]{\textrm{#1}} ^^A for fonts |
| 19 |
%\newcommand\fln[1]{\texttt{#1}} ^^A for filenames |
| 20 |
%\newcommand\pkg[1]{\textsf{#1}} ^^A for packages |
| 21 |
%\newcommand\opt[1]{\texttt{#1}} ^^A for package options |
| 22 |
%\newcommand\env[1]{\texttt{#1}} ^^A for environments |
| 23 |
%\newcommand\this{\pkg{\basename}} ^^A for this package |
| 24 |
%\newcommand\thisfln[1]{\fln{\basename #1}} ^^A for related files |
| 25 |
%\newcommand\fntcm{\fnt{CM}} |
| 26 |
%\newcommand\fntdc{\fnt{DC}} |
| 27 |
%\newcommand\fntec{\fnt{EC}} |
| 28 |
%\newcommand\NFSS{\textrm{NFSS}} |
| 29 |
%\providecommand\MF{\textsc{Metafont}} |
| 30 |
%\title{\this: More font sizes with \LaTeX} |
| 31 |
%\author{Christian Cornelssen (\texttt{[email protected]})} |
| 32 |
%\date{\fileversion\ [\filedate]} |
| 33 |
%\maketitle |
| 34 |
%\section{Introduction} |
| 35 |
% When writing yet another \LaTeX\ introduction with a demonstration of |
| 36 |
% font sizes, I discovered that \cmd{\Huge} and \cmd{\huge} were set to |
| 37 |
% the same size. No good for a demonstration! I localized the definition |
| 38 |
% in the \fln{size12.clo} class option file and found that the font size |
| 39 |
% for \cmd{\Huge} had to be increased from 24.88pt to 29.86pt. |
| 40 |
% |
| 41 |
% \DescribeMacro{\HUGE} |
| 42 |
% Therefore, I produced a package \this\ redefining \cmd{\Huge} and |
| 43 |
% defining an even ``bigger'' font size command \cmd{\HUGE}, because I |
| 44 |
% wanted to be able to use font sizes up to 35.83pt, as provided by the |
| 45 |
% \fntec\ fonts' standard edition. |
| 46 |
% |
| 47 |
% \DescribeMacro{\ssmall} |
| 48 |
% Additionally, I defined a size command \cmd{\ssmall} filling the |
| 49 |
% gap between the sizes selectable by \cmd{\tiny} and \cmd{\scriptsize}. |
| 50 |
% |
| 51 |
% The documentation in the \LaTeXe\ distribution's source file |
| 52 |
% \fln{fontdef.dtx} reminded me to also declare math sizes for the new |
| 53 |
% text sizes. |
| 54 |
% When studying the docs, I found that the math script sizes defined in |
| 55 |
% \fln{fontdef.dtx} grew faster than the text sizes, and that at least |
| 56 |
% the script sizes for 24.88pt seemed to be absolutely inappropriate. |
| 57 |
% Therefore, I designed two sets of text/math size combinations |
| 58 |
% including the new 29.86pt and 35.83pt text sizes, |
| 59 |
% one set just fixing the 25pt math script and scriptscript sizes, |
| 60 |
% and another one with somewhat smaller scriptscript sizes in order to |
| 61 |
% maintain the typical $10:7:5$ ratio for text sizes from 10pt upwards. |
| 62 |
% The math size changings can be activated by means of options |
| 63 |
% passed to the \this\ package. |
| 64 |
% |
| 65 |
% For testing the new sizes and for visualizing the effects of the math size |
| 66 |
% settings, a \LaTeX\ file \testfile\ containing sample text and math |
| 67 |
% expressions at various sizes is provided. |
| 68 |
% |
| 69 |
%\section{User Interface} |
| 70 |
% The \this\ package can be loaded by the \LaTeXe\ command |
| 71 |
% \begin{quote} |
| 72 |
% |\usepackage|\oarg{options}|{|\thisfln{}|}| |
| 73 |
% \end{quote} |
| 74 |
% By default, \this\ neither redefines existing macros nor changes |
| 75 |
% the standard math size declarations. |
| 76 |
% However, the package provides the additional font size selection commands |
| 77 |
% \cmd{\HUGE} and \cmd{\ssmall}, and declares math sizes |
| 78 |
% for the new 29.86pt and 35.83pt text sizes. |
| 79 |
% |
| 80 |
% Available Options are: |
| 81 |
% \begin{description} |
| 82 |
% \item[\opt{10pt}] |
| 83 |
% This option provides the same settings as the default. |
| 84 |
% \cmd{\HUGE} is defined to select a 29.86pt font size, and |
| 85 |
% \cmd{\ssmall} is made to give 6pt. |
| 86 |
% These definitions continuously extend the set of size commands given in |
| 87 |
% the \fln{size10.clo} standard class option file. |
| 88 |
% |
| 89 |
% \item[\opt{11pt}] |
| 90 |
% This option makes \cmd{\HUGE} and \cmd{\ssmall} select 29.86pt and |
| 91 |
% 7pt, respectively, which is suitable for use with the settings given in |
| 92 |
% the \fln{size11.clo} standard class option file. |
| 93 |
% |
| 94 |
% \item[\opt{12pt}] |
| 95 |
% With this option, \cmd{\HUGE} and \cmd{\ssmall} are defined to |
| 96 |
% select 35.83pt and 7pt, respectively. |
| 97 |
% |
| 98 |
% Additionally, the size selection command \cmd{\Huge} is redefined |
| 99 |
% to give 29.86pt. |
| 100 |
% This is done because the setting given in the \fln{size12.clo} standard |
| 101 |
% class option file saturates the \cmd{\Huge} font size at the same level |
| 102 |
% as given by \cmd{\huge} (24.88pt)---presumably with the \fntcm\ font |
| 103 |
% restrictions of old \LaTeX~2.09 in mind. |
| 104 |
% Nowadays, with \LaTeXe's flexible \NFSS, font size selection commands |
| 105 |
% are not associated with a predetermined font family any longer, |
| 106 |
% hence such restrictions are out of place. |
| 107 |
% Note that \NFSS\ automatically resorts to lower sizes if a demanded font |
| 108 |
% size is not available, so standard \fntcm\ font users will not be |
| 109 |
% affected by the new size settings, but \fntec\ font users can benefit |
| 110 |
% from them. |
| 111 |
% |
| 112 |
% \item[\opt{ecpatch}] |
| 113 |
% This is a bug fix for the \fntec\ font declarations given in the |
| 114 |
% \LaTeXe\ releases from December 1996 through December 1997. |
| 115 |
% Therein, the declarations of the \fntec\ fonts do not include |
| 116 |
% font sizes above 24.88pt, although the \fntec\ font standard edition |
| 117 |
% provides font metrics files for 29.86pt and 35.83pt. |
| 118 |
% As a consequence, \NFSS\ would deny usage of those font sizes |
| 119 |
% and substitute 24.88pt instead. |
| 120 |
% |
| 121 |
% The \opt{ecpatch} option installs macros which override any declaration |
| 122 |
% of an \fntec\ font with an own declaration including the 29.86pt |
| 123 |
% and 35.83pt sizes. |
| 124 |
% |
| 125 |
% Regard this patch as a temporary bug fix; the proper way requires |
| 126 |
% updating the \LaTeXe\ distribution source file \fln{cmfonts.fdd} |
| 127 |
% from which the \fln{t1cm*.fd} files are generated, and remaking the |
| 128 |
% \LaTeXe\ format file. |
| 129 |
% Indeed, a proper fix has been incorporated into the \LaTeXe\ |
| 130 |
% distribution shortly after December 1997; therefore, recent distributions |
| 131 |
% should not require the \opt{ecpatch} option. |
| 132 |
% |
| 133 |
% As can be concluded from the above, the decision whether to use |
| 134 |
% \opt{ecpatch} or not should be determined by the availibility of |
| 135 |
% \fntec\ (\emph{not} \fntdc!) fonts and by the version of the |
| 136 |
% \LaTeXe\ base distribution both of which may vary independently from the |
| 137 |
% author's main \LaTeX\ input file. |
| 138 |
% Therefore, the appropriate spot for invoking \opt{ecpatch} |
| 139 |
% is a configuration file placed somewhere in the \LaTeXe\ input |
| 140 |
% directory tree with filename \thisfln{.cfg}, |
| 141 |
% containing a line like |
| 142 |
% \begin{quote} |
| 143 |
%\begin{verbatim} |
| 144 |
%\ExecuteOptions{ecpatch} |
| 145 |
%\end{verbatim} |
| 146 |
% \end{quote} |
| 147 |
% This frees authors of \LaTeXe\ input files from the need of specifying |
| 148 |
% \opt{ecpatch} themselves when using the \this\ package |
| 149 |
% and thus preserves the portability of \LaTeXe\ documents across |
| 150 |
% different \LaTeXe\ releases. |
| 151 |
% |
| 152 |
% Note that \opt{ecpatch} is useful only if the following conditions |
| 153 |
% are met: |
| 154 |
% \begin{enumerate} |
| 155 |
% \item |
| 156 |
% The ``official'' \fntec\ fonts are available, |
| 157 |
% including TFM files for the sizes 29.86pt and 35.83pt. |
| 158 |
% With \fntdc\ fonts instead, \opt{ecpatch} will not work |
| 159 |
% correctly.\footnote{ |
| 160 |
% \opt{ecpatch} may work with the last (``new'') |
| 161 |
% \fntdc\ font release if provided with TFM files for all standard |
| 162 |
% \fntec\ font sizes. |
| 163 |
% Typically, the 29.86pt size would be missing.} |
| 164 |
% \item |
| 165 |
% The \LaTeXe\ base has been configured to support \fntec\ fonts |
| 166 |
% (i.e.\ \fln{cmfonts.fdd} has been unpacked by \fln{ec.ins}\footnote{ |
| 167 |
% Using \fln{newdc.ins} for \fntdc\ fonts with all TFM files mentioned |
| 168 |
% above could also work.}). |
| 169 |
% \item |
| 170 |
% The \LaTeXe\ base (or at least its \fln{cmfonts.fdd}) has a release |
| 171 |
% date before 1998. Later releases do not need \opt{ecpatch}.\footnote{ |
| 172 |
% Applying \opt{ecpatch} to newer \LaTeXe\ releases has not caused |
| 173 |
% any harm in my testings so far.} |
| 174 |
% \end{enumerate} |
| 175 |
% Anyway---upgrading your system to a recent \LaTeXe\ base |
| 176 |
% with ``official'' \fntec\ fonts would be a better solution |
| 177 |
% than using \opt{ecpatch}. |
| 178 |
% |
| 179 |
% \item[\opt{normalscripts}] |
| 180 |
% This option decreases the script and scriptscript sizes associated |
| 181 |
% with the 24.88pt text size by one magstep, in order to damp the |
| 182 |
% script size explosion defined in the \LaTeXe\ source file |
| 183 |
% \fln{fontdef.dtx}. |
| 184 |
% With this setting, a formula like $\frac{X}{Y}$ within a \cmd{\Huge} |
| 185 |
% paragraph (e.\,g.\ a document title) does no longer affect line spacing, |
| 186 |
% as should be. |
| 187 |
% |
| 188 |
% \item[\opt{smallscripts}] |
| 189 |
% Starting from the \opt{normalscripts} math size settings, this option |
| 190 |
% further reduces the scriptscript sizes associated with text sizes of |
| 191 |
% 17.28pt and above. |
| 192 |
% The idea behind this is to maintain an approximate $10:7:5$ ratio |
| 193 |
% between text, script, and scriptscript sizes in bigger-than-normal |
| 194 |
% writings. |
| 195 |
% \end{description} |
| 196 |
% |
| 197 |
% The math script size option names roughly describe the changes to the |
| 198 |
% standard \LaTeX\ setup. |
| 199 |
% Therefore, \opt{normalscripts} may not look ``normal'' in the sense of |
| 200 |
% ``just right'', but differs from the standard setup in 24.88pt |
| 201 |
% writings only. |
| 202 |
% I prefer \opt{smallscripts} which results in scriptscript sizes that are |
| 203 |
% not really small---they are simply not as big as the standard ones. |
| 204 |
% Note that this option only affects math expressions with nested fractions |
| 205 |
% and/or sub-/superscripts in large writings (17.28pt text size and above), |
| 206 |
% e.\,g.\ in titles or section headers. |
| 207 |
% Therefore, it is quite likely that you have not encountered an example |
| 208 |
% of that kind so far. |
| 209 |
% But once you have, you should remember this package\dots |
| 210 |
% |
| 211 |
%\section{The test file \testfile} |
| 212 |
% A test file \testfile\ is provided for evaluating the math size |
| 213 |
% settings. You may rename it and then manipulate it as you wish, |
| 214 |
% typically for testing the options passed to the \this\ package. |
| 215 |
% The test document shows sample text and math expressions at various |
| 216 |
% sizes, each framed above and below by horizontal lines delimiting the |
| 217 |
% amount of vertical space that is normally available for math expressions |
| 218 |
% within paragraphs of text. |
| 219 |
% If the expressions overprint the delimiters, they are likely to cause |
| 220 |
% stretching of the baseline skip when used within a paragraph. |
| 221 |
% |
| 222 |
% However, the output for sizes above 24.88pt may be erroneous or |
| 223 |
% misleading under certain circumstances: |
| 224 |
% \begin{itemize} |
| 225 |
% \item |
| 226 |
% Even when using \fntec\ text fonts, math expressions may still use |
| 227 |
% \fntcm\ fonts which are limited to 24.88pt in their declarations |
| 228 |
% to \NFSS\@. |
| 229 |
% This does not matter for scripts and scriptscripts because even |
| 230 |
% \cmd{\HUGE} writings do not request script sizes greater than 24.88pt. |
| 231 |
% However, the main (i.\,e.\ non-script) symbols of math expressions in |
| 232 |
% \cmd{\HUGE}, or even in \cmd{\Huge} (for \opt{12pt} documents), |
| 233 |
% will be shrinked to 24.88pt size, |
| 234 |
% thereby issuing \NFSS\ warnings about unavailable font sizes |
| 235 |
% for OT1, OML, or OMS encodings. |
| 236 |
% (If there are messages about unavailable T1 font sizes, |
| 237 |
% you should try the \opt{ecpatch} option or get a recent |
| 238 |
% version of \LaTeX\ and of the \fntec\ fonts.) |
| 239 |
% |
| 240 |
% \item |
| 241 |
% As another effect of the main symbol size shrinking, |
| 242 |
% the vertical position of the main math axis is lowered, |
| 243 |
% thereby moving fraction rules towards the denominators. |
| 244 |
% |
| 245 |
% \item |
| 246 |
% The calculation of the amount of vertical space available within a |
| 247 |
% normal line yields wrong results if fonts with the desired size |
| 248 |
% are not available. |
| 249 |
% In detail, the appearant amount of free vertical space gets increased by |
| 250 |
% twice the difference between the requested font size and the size chosen |
| 251 |
% by \NFSS\@. |
| 252 |
% |
| 253 |
% If you use properly-declared \fntec\ fonts for testing the samples, |
| 254 |
% this problem should not occur. |
| 255 |
% \end{itemize} |
| 256 |
% |
| 257 |
% By adding extreme magnification factors to the \fntcm\ font declarations, |
| 258 |
% I have verified that the aforementioned artifacts disappear |
| 259 |
% when math fonts in the requested sizes are made available (though heavily |
| 260 |
% ``bolded'' by the magnification). |
| 261 |
% However, I have not included that hack for demonstration, |
| 262 |
% in order not to provide any means for over-using the \fntcm\ math fonts. |
| 263 |
% According to the \LaTeXe\ newsletters \fln{ltnews09.tex} |
| 264 |
% and \fln{ltnews11.tex}, \TeX\ users can look forward to a modern |
| 265 |
% math font concept allowing easy setup and use of alternate math fonts. |
| 266 |
% Therefore, making documents which explicitly misuse \fntcm\ fonts for |
| 267 |
% huge math expressions would be counterproductive. |
| 268 |
% However, even without math fonts at more than 24.88pt, the improvements |
| 269 |
% in typesetting huge math expressions can be demonstrated by varying |
| 270 |
% the options passed to the \this\ package in the test file \testfile. |
| 271 |
% |
| 272 |
%\StopEventually{} |
| 273 |
%\section{Package Code} |
| 274 |
% This section documents the contents of the ready-to-use package file |
| 275 |
% \thisfln{.sty}. |
| 276 |
% \begin{macrocode} |
| 277 |
%<*package> |
| 278 |
% \end{macrocode} |
| 279 |
% |
| 280 |
% \subsection{Preliminaries} |
| 281 |
% Announce the file as a \LaTeXe\ package. |
| 282 |
% \begin{macrocode} |
| 283 |
\ProvidesPackage{moresize}[1999/07/26 v1.9 (more font sizes)] |
| 284 |
% \end{macrocode} |
| 285 |
% |
| 286 |
% \begin{macro}{\@xxxpt} |
| 287 |
% \begin{macro}{\@xxxvipt} |
| 288 |
% As a convention, declare macros for the new point sizes. |
| 289 |
% \begin{macrocode} |
| 290 |
\providecommand\@xxxpt{29.86} |
| 291 |
\providecommand\@xxxvipt{35.83} |
| 292 |
% \end{macrocode} |
| 293 |
% \end{macro} |
| 294 |
% \end{macro} |
| 295 |
% |
| 296 |
% \subsection{Size Selection Commands} |
| 297 |
% \begin{macro}{\HUGE} |
| 298 |
% \begin{macro}{\ssmall} |
| 299 |
% Define the author commands \cmd{\HUGE} and \cmd{\ssmall}, |
| 300 |
% depending on the main document font size option. |
| 301 |
% In case of \opt{12pt}, fix the clipping of \cmd{\Huge} which |
| 302 |
% occurs in \fln{size12.clo} (\fln{classes.dtx}). |
| 303 |
% \begin{macrocode} |
| 304 |
\DeclareOption{10pt}{ |
| 305 |
\def\ssmall{\@setfontsize\ssmall\@vipt\@viipt} |
| 306 |
\def\HUGE{\@setfontsize\HUGE\@xxxpt{36}}} |
| 307 |
\DeclareOption{11pt}{ |
| 308 |
\def\ssmall{\@setfontsize\ssmall\@viipt\@viiipt} |
| 309 |
\def\HUGE{\@setfontsize\HUGE\@xxxpt{36}}} |
| 310 |
\DeclareOption{12pt}{ |
| 311 |
\def\ssmall{\@setfontsize\ssmall\@viipt\@viiipt} |
| 312 |
\def\Huge{\@setfontsize\Huge\@xxxpt{36}} |
| 313 |
\def\HUGE{\@setfontsize\HUGE\@xxxvipt{43}}} |
| 314 |
% \end{macrocode} |
| 315 |
% The definitions given here are similar to most size command definitions |
| 316 |
% in \LaTeXe's \fln{classes.dtx}. |
| 317 |
% The following rules have been observed and taken as guidelines: |
| 318 |
% \begin{itemize} |
| 319 |
% \item |
| 320 |
% Size commands other than \cmd{\footnotesize}--\cmd{\normalsize} are |
| 321 |
% not intended for typesetting document structures more complex |
| 322 |
% than paragraphs. |
| 323 |
% Therefore, their definitions do not contain specifications |
| 324 |
% of dimension parameters for list environments or displayed equations. |
| 325 |
% \item |
| 326 |
% Baselineskips for text sizes below 8pt are chosen to be |
| 327 |
% 1pt higher than the text size. |
| 328 |
% Baselineskips above 10pt are set to somewhat rounded pt sizes |
| 329 |
% around 1.2~times the text size. |
| 330 |
% \end{itemize} |
| 331 |
% \end{macro} |
| 332 |
% \end{macro} |
| 333 |
% |
| 334 |
% \subsection{Math Size Options} |
| 335 |
% Consider the declarations in \LaTeXe's \fln{fontdef.dtx}: |
| 336 |
% \begin{quote} |
| 337 |
%\begin{verbatim} |
| 338 |
%\DeclareMathSizes{\@xpt}{\@xpt}{7}{5} |
| 339 |
%\DeclareMathSizes{\@xipt}{\@xipt}{8}{6} |
| 340 |
%\DeclareMathSizes{\@xiipt}{\@xiipt}{8}{6} |
| 341 |
%\DeclareMathSizes{\@xivpt}{\@xivpt}{\@xpt}{7} |
| 342 |
%\DeclareMathSizes{\@xviipt}{\@xviipt}{\@xiipt}{\@xpt} |
| 343 |
%\DeclareMathSizes{\@xxpt}{\@xxpt}{\@xivpt}{\@xiipt} |
| 344 |
%\DeclareMathSizes{\@xxvpt}{\@xxvpt}{\@xxpt}{\@xviipt} |
| 345 |
%\end{verbatim} |
| 346 |
% \end{quote} |
| 347 |
% The script and scriptscript sizes for |\@xxvpt| are one magstep |
| 348 |
% bigger than the sizes extrapolated from the context. |
| 349 |
% This seems to be an error. And in fact, fractions like $\frac{X}{Y}$ |
| 350 |
% placed in 25pt text strech the baseline skip, whereas this does not |
| 351 |
% happen at lower sizes. |
| 352 |
% |
| 353 |
% This will be fixed when given the option \opt{normalscripts}: |
| 354 |
% \begin{macrocode} |
| 355 |
\DeclareOption{normalscripts}{ |
| 356 |
\DeclareMathSizes{\@xxvpt}{\@xxvpt}{\@xviipt}{\@xivpt}} |
| 357 |
% \end{macrocode} |
| 358 |
% |
| 359 |
% In any case, declare math sizes for the new point sizes. |
| 360 |
% \begin{macrocode} |
| 361 |
\DeclareMathSizes{\@xxxpt}{\@xxxpt}{\@xxpt}{\@xviipt} |
| 362 |
\DeclareMathSizes{\@xxxvipt}{\@xxxvipt}{\@xxvpt}{\@xxpt} |
| 363 |
% \end{macrocode} |
| 364 |
% |
| 365 |
% There remains a one-magstep ratio between the script and scriptscript |
| 366 |
% sizes for text sizes above |\@xivpt|, whereas for text sizes between |
| 367 |
% |\@xpt| and |\@xivpt|, approximately two magsteps are taken. |
| 368 |
% An option is defined for applying the two-magsteps rule to text sizes |
| 369 |
% above |\@xivpt|, including the new |\@xxxpt| and |\@xxxvipt| sizes. |
| 370 |
% \begin{macrocode} |
| 371 |
\DeclareOption{smallscripts}{ |
| 372 |
\DeclareMathSizes{\@xviipt}{\@xviipt}{\@xiipt}{8} |
| 373 |
\DeclareMathSizes{\@xxpt}{\@xxpt}{\@xivpt}{\@xpt} |
| 374 |
\DeclareMathSizes{\@xxvpt}{\@xxvpt}{\@xviipt}{\@xiipt} |
| 375 |
\DeclareMathSizes{\@xxxpt}{\@xxxpt}{\@xxpt}{\@xivpt} |
| 376 |
\DeclareMathSizes{\@xxxvipt}{\@xxxvipt}{\@xxvpt}{\@xviipt}} |
| 377 |
% \end{macrocode} |
| 378 |
% |
| 379 |
% \subsection{\fntec\ Font Declaration Patch} |
| 380 |
% \begin{macro}{\UndeclareFontFamily} |
| 381 |
% |\UndeclareFontFamily|\marg{ENC}\marg{family} makes \NFSS\ forget |
| 382 |
% the font information for the font family \meta{family} with encoding |
| 383 |
% \meta{ENC} and thus causes the corresponding font declaration file |
| 384 |
% (\fln{\meta{enc}\meta{family}.fd}) to be reloaded on demand. |
| 385 |
% \begin{macrocode} |
| 386 |
\newcommand\UndeclareFontFamily[2]{% |
| 387 |
\global\expandafter\let\csname#1+#2\endcsname\relax} |
| 388 |
% \end{macrocode} |
| 389 |
% \end{macro} |
| 390 |
% |
| 391 |
% The \fntec\ font declaration patch is an optional bug fix, |
| 392 |
% and possibly obsolete. |
| 393 |
% \begin{macrocode} |
| 394 |
\DeclareOption{ecpatch}{ |
| 395 |
\typeout |
| 396 |
{*** Using EC font declaration patch for pre-1998 LaTeX2e releases ***} |
| 397 |
% \end{macrocode} |
| 398 |
% |
| 399 |
% \begin{macro}{\EC@family} |
| 400 |
% Declaration of font families from the \fntec\ or the previously |
| 401 |
% released \fntdc\ edition is done by the macro \cmd{\EC@family}. |
| 402 |
% It is defined in the relevant font definition files by means of |
| 403 |
% \cmd{\providecommand}. |
| 404 |
% Hence, predefining this macro will override the definition given in the |
| 405 |
% \fln{fd} files. |
| 406 |
% Now take the original definition and complete the size specification |
| 407 |
% with 29.86pt and 35.83pt entries. |
| 408 |
% Since \cmd{\nfss@catcodes} have not been activated, white space in the |
| 409 |
% \cmd{\DeclareFontShape} call must be avoided. |
| 410 |
% \begin{macrocode} |
| 411 |
\def\EC@family#1#2#3#4#5{% |
| 412 |
\DeclareFontShape{#1}{#2}{#3}{#4}{% |
| 413 |
<5><6><7><8><9><10><10.95><12><14.4>% |
| 414 |
<17.28><20.74><24.88><29.86><35.83>genb*#5}{}} |
| 415 |
% \end{macrocode} |
| 416 |
% \end{macro} |
| 417 |
% \begin{macro}{\EC@ttfamily} |
| 418 |
% For the typewriter families, a similar macro is used. |
| 419 |
% \begin{macrocode} |
| 420 |
\def\EC@ttfamily#1#2#3#4#5{% |
| 421 |
\DeclareFontShape{#1}{#2}{#3}{#4}{% |
| 422 |
<5><6><7><8>#50800% |
| 423 |
<9><10><10.95><12><14.4><17.28><20.74><24.88>% |
| 424 |
<29.86><35.83>genb*#5}{}} |
| 425 |
% \end{macrocode} |
| 426 |
% \end{macro} |
| 427 |
% |
| 428 |
% Now undeclare font families that are usually mapped |
| 429 |
% to \fntec\ or \fntdc\ fonts. |
| 430 |
% On demand, they will be redeclared under control of the predefined |
| 431 |
% \cmd{\EC@family} or \cmd{\EC@ttfamily} macros. |
| 432 |
% \begin{macrocode} |
| 433 |
\UndeclareFontFamily{T1}{cmr} |
| 434 |
\UndeclareFontFamily{TS1}{cmr} |
| 435 |
\UndeclareFontFamily{T1}{cmss} |
| 436 |
\UndeclareFontFamily{TS1}{cmss} |
| 437 |
\UndeclareFontFamily{T1}{cmtt} |
| 438 |
\UndeclareFontFamily{TS1}{cmtt} |
| 439 |
\UndeclareFontFamily{T1}{cmvtt} |
| 440 |
\UndeclareFontFamily{TS1}{cmvtt} |
| 441 |
\UndeclareFontFamily{T1}{cmsc}% from `smallcap' package |
| 442 |
\UndeclareFontFamily{T1}{cmdh} |
| 443 |
\UndeclareFontFamily{T1}{cmfib} |
| 444 |
\UndeclareFontFamily{T1}{cmfr} |
| 445 |
% \end{macrocode} |
| 446 |
% The patch is now complete. |
| 447 |
% \begin{macrocode} |
| 448 |
} |
| 449 |
% \end{macrocode} |
| 450 |
% Of course, a proper way in \NFSS\ for adding size specifications to |
| 451 |
% existing font shape declarations would be appreciated. |
| 452 |
% But once the fonts are declared properly, this should not be necessary |
| 453 |
% at all. |
| 454 |
% |
| 455 |
% \subsection{Configuration} |
| 456 |
% In the standard classes, 10pt writing is the default. |
| 457 |
% Therefore, the same is assumed here. |
| 458 |
% Global options or explicitly given package options may override this. |
| 459 |
% \begin{macrocode} |
| 460 |
\ExecuteOptions{10pt} |
| 461 |
% \end{macrocode} |
| 462 |
% Before processing the package options, a configuration file |
| 463 |
% \thisfln{.cfg} may be input, |
| 464 |
% typically containing |\ExecuteOptions{ecpatch}| |
| 465 |
% for systems with installed \fntec\ fonts and a \LaTeXe\ version |
| 466 |
% released before 1998. |
| 467 |
% \begin{macrocode} |
| 468 |
\InputIfFileExists{moresize.cfg}{}{} |
| 469 |
\ProcessOptions |
| 470 |
%</package> |
| 471 |
% \end{macrocode} |
| 472 |
% |
| 473 |
%\section{Test Code} |
| 474 |
% This section documents the contents of the test document source file |
| 475 |
% \testfile. |
| 476 |
% \begin{macrocode} |
| 477 |
%<*testfile> |
| 478 |
% \end{macrocode} |
| 479 |
% |
| 480 |
% This is a \LaTeXe\ document. |
| 481 |
% \begin{macrocode} |
| 482 |
%% This is a test file for text and math size settings. |
| 483 |
%% You might want to test several configurations. Therefore, |
| 484 |
%% it might be a good idea to save different versions of this file |
| 485 |
%% under different names. |
| 486 |
\documentclass[11pt,a4paper]{article} |
| 487 |
\usepackage{exscale} %% for scaled \sum, \int etc. |
| 488 |
|
| 489 |
% \end{macrocode} |
| 490 |
% |
| 491 |
% Here the package of interest is loaded. |
| 492 |
% \begin{macrocode} |
| 493 |
%% Available options for the `moresize' package: |
| 494 |
%% 10pt, 11pt, 12pt (in \documentclass) determines font sizes |
| 495 |
%% normalscripts avoid script size explosion in huge writings |
| 496 |
%% smallscripts smaller, more appropriate script sizes |
| 497 |
%% ecpatch tell NFSS that huge EC fonts are available |
| 498 |
\usepackage[smallscripts]{moresize} |
| 499 |
|
| 500 |
% \end{macrocode} |
| 501 |
% |
| 502 |
% For testing the 29.86pt and 35.83pt sizes, the T1-encoded \fntec\ or |
| 503 |
% \fntdc\ fonts may be needed. |
| 504 |
% \begin{macrocode} |
| 505 |
%% Use the `t1enc' package for testing with DC/EC fonts |
| 506 |
\usepackage{t1enc} |
| 507 |
|
| 508 |
% \end{macrocode} |
| 509 |
% |
| 510 |
% \begin{macro}{\calcmathspace} |
| 511 |
% \begin{macro}{\mathht} |
| 512 |
% \begin{macro}{\mathdp} |
| 513 |
% The amount of vertical space usable for math expressions within |
| 514 |
% a paragraph without probably stretching the baseline skip |
| 515 |
% can be calculated by means of the macro \cmd{\calcmathspace}. |
| 516 |
% When called, \cmd{\calcmathspace} uses the caller's current text size |
| 517 |
% and \cmd{\baselineskip} settings as well as height and depth of the |
| 518 |
% characters |[| and |]| from the roman text font for estimating |
| 519 |
% the height and depth which an inline math expression may have. |
| 520 |
% The results are stored in the length parameters \cmd{\mathht} and |
| 521 |
% \cmd{\mathdp}, respectively. |
| 522 |
% \begin{macrocode} |
| 523 |
%% Consider a paragraph with a text line of depth d (below the baseline), |
| 524 |
%% followed by a line with an inline formula, |
| 525 |
%% followed by a text line with height h (above the baseline). |
| 526 |
%% Then the formula's height may not exceed \baselineskip - d, |
| 527 |
%% and its depth may not exceed \baselineskip - h, |
| 528 |
%% or the baseline skips will be stretched. |
| 529 |
%% The roman-text brackets `[' and `]' are used for estimating d and h. |
| 530 |
%% Note that the space for the formula seems to get larger if NFSS |
| 531 |
%% substitutes a smaller font, because \baselineskip does not shrink |
| 532 |
%% accordingly! |
| 533 |
\newlength\mathht %% height available for an inline formula |
| 534 |
\newlength\mathdp %% depth available for an inline formula |
| 535 |
\newcommand\calcmathspace{% |
| 536 |
\settodepth\mathht{\textrm{[}}% |
| 537 |
\setlength\mathht{-\mathht}% |
| 538 |
\addtolength\mathht{\baselineskip}% |
| 539 |
\settoheight\mathdp{\textrm{]}}% |
| 540 |
\setlength\mathdp{-\mathdp}% |
| 541 |
\addtolength\mathdp{\baselineskip}} |
| 542 |
|
| 543 |
% \end{macrocode} |
| 544 |
% \end{macro} |
| 545 |
% \end{macro} |
| 546 |
% \end{macro} |
| 547 |
% |
| 548 |
% \begin{macro}{\linebox} |
| 549 |
% The command \cmd{\linebox}\marg{text} typesets \meta{text} in a box |
| 550 |
% with fixed height and depth corresponding to a line that extends so high |
| 551 |
% and so deep that it just touches the preceding and following lines |
| 552 |
% which are assumed to contain ordinary text. |
| 553 |
% The upper and lower bounds of the box are delimited by horizontal lines. |
| 554 |
% \begin{macrocode} |
| 555 |
%% The following command shows its argument, typeset in text style, |
| 556 |
%% between two horizontal lines showing the available space in a text line. |
| 557 |
%% If the argument overprints the lines, it would stretch |
| 558 |
%% the baseline skip in a paragraph. |
| 559 |
\newcommand\linebox[1]{\calcmathspace\begin{tabular}{@{}l@{}}\hline |
| 560 |
\raisebox{0pt}[\mathht][\mathdp]{#1}\\\hline\end{tabular}} |
| 561 |
|
| 562 |
% \end{macrocode} |
| 563 |
% \end{macro} |
| 564 |
% |
| 565 |
% \begin{macro}{\msample} |
| 566 |
% The macro \cmd{\msample} should contain fairly simple math expressions |
| 567 |
% with nested sub- or superscripts and/or fractions which should fit |
| 568 |
% into paragraphs of text without stretching the baseline skip. |
| 569 |
% \begin{macrocode} |
| 570 |
%% A macro for sample math expressions. |
| 571 |
%% The original definition gives expressions which should fit into |
| 572 |
%% paragraphs without enlarging the baseline skip. |
| 573 |
%% For variable-sized \sum or \int symbols, \usepackage{exscale} is needed. |
| 574 |
%% Caution: Main (i.e. non-script) symbols are 24.88pt maximum |
| 575 |
%% with CM math fonts. You may try using text fonts instead, |
| 576 |
%% but some vertical positionings and spacings still go wrong then. |
| 577 |
\newcommand\msample{\ensuremath{ |
| 578 |
\frac{X}{Y} |
| 579 |
\, g^{i_1\ldots i_n}_{j_1\ldots j_n} |
| 580 |
\, \frac{t^2}{2!} |
| 581 |
\, e^{-\frac{t}{\tau}} |
| 582 |
}} |
| 583 |
|
| 584 |
% \end{macrocode} |
| 585 |
% \end{macro} |
| 586 |
% |
| 587 |
% \begin{macro}{\Size} |
| 588 |
% Interested testers may like to directly specify point sizes instead of |
| 589 |
% using author commands. |
| 590 |
% The command \cmd{\Size}\marg{font size}\marg{baselineskip} |
| 591 |
% is provided for easying such specifications. |
| 592 |
% \meta{font size} and \meta{baselineskip} must be specified as numbers |
| 593 |
% of pt, with the |pt| omitted. |
| 594 |
% \begin{macrocode} |
| 595 |
%% None of the size options 10pt, 11pt, and 12pt offers the entire spectrum |
| 596 |
%% of available font sizes. |
| 597 |
%% For example, the 10pt option offers no command for selecting 10.95pt, |
| 598 |
%% and the 12pt option does not provide a command for 9pt. |
| 599 |
%% The 11pt option fills both gaps, but misses the extremes 35.83pt and 5pt. |
| 600 |
%% Therefore, a shorthand for lower-level size switches is provided. |
| 601 |
%% E.g. \Size{20.74}{25} selects a 20.74pt font size with 25pt baselineskip. |
| 602 |
\newcommand\Size[2]{\fontsize{#1}{#2}\selectfont} |
| 603 |
|
| 604 |
% \end{macrocode} |
| 605 |
% \end{macro} |
| 606 |
% |
| 607 |
% Now typesetting can begin. Only one page should be needed. |
| 608 |
% Remember to echo the options used. |
| 609 |
% \begin{macrocode} |
| 610 |
\begin{document} |
| 611 |
\parindent0pt |
| 612 |
|
| 613 |
%% The test output should fit onto one page |
| 614 |
\pagestyle{empty} |
| 615 |
\enlargethispage{1in} |
| 616 |
|
| 617 |
%% Don't forget to list the moresize options in the test output! |
| 618 |
\textsf{moresize} options: |
| 619 |
%%[10pt] |
| 620 |
[11pt] |
| 621 |
%%[12pt] |
| 622 |
%%[normalscripts] |
| 623 |
[smallscripts] |
| 624 |
%%[ecpatch] |
| 625 |
|
| 626 |
%% Are you using HUGE fonts? |
| 627 |
%%Using CM fonts only. |
| 628 |
%%Using DC fonts for text, CM fonts for math. |
| 629 |
Using EC fonts for text, CM fonts for math. |
| 630 |
|
| 631 |
% \end{macrocode} |
| 632 |
% |
| 633 |
% Now comes a table containing samples at sizes down to 5pt. |
| 634 |
% The original font size directives are intended for use with the \opt{11pt} |
| 635 |
% option; with \opt{12pt} (\opt{10pt}) instead, the 35.83pt (5pt) size would |
| 636 |
% appear twice. |
| 637 |
% \begin{macrocode} |
| 638 |
\begin{center} |
| 639 |
\newcommand\n{\\\\[-1ex]} %% for separating the tabular lines |
| 640 |
\begin{tabular}{@{}ll@{}} |
| 641 |
\Size{35.83}{43}\linebox{36pt} |
| 642 |
& \Size{35.83}{43}\linebox{\msample} |
| 643 |
\n \HUGE\linebox{HUGE} & \HUGE\linebox{\msample} |
| 644 |
\n \Huge\linebox{Huge} & \Huge\linebox{\msample} |
| 645 |
\n \huge\linebox{huge} & \huge\linebox{\msample} |
| 646 |
\n \LARGE\linebox{LARGE} & \LARGE\linebox{\msample} |
| 647 |
\n \Large\linebox{Large} & \Large\linebox{\msample} |
| 648 |
\n \large\linebox{large} & \large\linebox{\msample} |
| 649 |
\n \normalsize\linebox{normalsize} |
| 650 |
& \normalsize\linebox{\msample} |
| 651 |
\n \small\linebox{small} & \small\linebox{\msample} |
| 652 |
\n \footnotesize\linebox{footnotesize} |
| 653 |
& \footnotesize\linebox{\msample} |
| 654 |
\n \scriptsize\linebox{scriptsize} |
| 655 |
& \scriptsize\linebox{\msample} |
| 656 |
\n \ssmall\linebox{ssmall} & \ssmall\linebox{\msample} |
| 657 |
\n \tiny\linebox{tiny} & \tiny\linebox{\msample} |
| 658 |
\n \Size{5}{6}\linebox{5pt} |
| 659 |
& \Size{5}{6}\linebox{\msample} |
| 660 |
\end{tabular} |
| 661 |
\end{center} |
| 662 |
% \end{macrocode} |
| 663 |
% |
| 664 |
% That's all on one test page. |
| 665 |
% \begin{macrocode} |
| 666 |
\end{document} |
| 667 |
%</testfile> |
| 668 |
% \end{macrocode} |
| 669 |
%\endinput |