| 1 |
% \iffalse meta-comment |
| 2 |
% |
| 3 |
% Copyright (C) 2019-2024 by Antoine Missier <[email protected]> |
| 4 |
% |
| 5 |
% This file may be distributed and/or modified under the conditions of |
| 6 |
% the LaTeX Project Public License, either version 1.3 of this license |
| 7 |
% or (at your option) any later version. The latest version of this |
| 8 |
% license is in: |
| 9 |
% |
| 10 |
% http://www.latex-project.org/lppl.txt |
| 11 |
% |
| 12 |
% and version 1.3 or later is part of all distributions of LaTeX version |
| 13 |
% 2005/12/01 or later. |
| 14 |
% \fi |
| 15 |
% |
| 16 |
% \iffalse |
| 17 |
%<*driver> |
| 18 |
\ProvidesFile{mismath.dtx} |
| 19 |
%</driver> |
| 20 |
%<*package> |
| 21 |
\NeedsTeXFormat{LaTeX2e}[2005/12/01] |
| 22 |
\ProvidesPackage{mismath} |
| 23 |
[2025/10/08 v3.2 .dtx Miscellaneous mathematical macros] |
| 24 |
%</package> |
| 25 |
%<*driver> |
| 26 |
\documentclass{ltxdoc} |
| 27 |
\usepackage[utf8]{inputenc} % run through XeLaTeX |
| 28 |
\usepackage[T1]{fontenc} |
| 29 |
\usepackage[english]{babel} |
| 30 |
%\usepackage{fontspec} |
| 31 |
\usepackage{fourier} % in case of font change, modify 2.1 (3rd §) |
| 32 |
\usepackage[ibrackets,decimalcomma,otherReIm]{mismath} |
| 33 |
%\usepackage{amssymb} % unnecessary with fourier |
| 34 |
\usepackage{multicol} |
| 35 |
\usepackage{sectsty} |
| 36 |
\usepackage{xcolor} |
| 37 |
\usepackage[pifont]{spacingtricks} |
| 38 |
\usepackage{array} |
| 39 |
\usepackage{metalogo} % for logos of XeLaTeX et LuaLaTeX |
| 40 |
|
| 41 |
\definecolor{darkbrown}{rgb}{0.5,0.1,0.1} |
| 42 |
\allsectionsfont{\color{darkbrown}} |
| 43 |
|
| 44 |
% Next command is used for showing original Latin Modern \i and \j in text mode: |
| 45 |
%\DeclareTextFontCommand{\extrafont}{\fontfamily{lmr}\selectfont} % useless with fourier |
| 46 |
|
| 47 |
% The following commands provide several shapes for pi |
| 48 |
\DeclareFontEncoding{LGR}{}{} |
| 49 |
\def\pilmr{\text{\usefont{LGR}{lmr}{m}{n}\symbol{112}}} |
| 50 |
\def\piAlegreya{\text{\usefont{LGR}{Alegreya-LF}{m}{n}\symbol{112}}} |
| 51 |
\def\piCochineal{\text{\usefont{LGR}{Cochineal-LF}{m}{n}\symbol{112}}} |
| 52 |
\def\piLibSerif{\text{\usefont{LGR}{LibertinusSerif-LF}{m}{n}\symbol{112}}} |
| 53 |
\def\piLibSans{\text{\usefont{LGR}{LibertinusSans-LF}{m}{n}\symbol{112}}} |
| 54 |
\def\pilmss{\text{\usefont{LGR}{lmss}{m}{n}\symbol{112}}} |
| 55 |
\def\pigentium{\text{\usefont{LGR}{gentium}{m}{n}\symbol{112}}} |
| 56 |
\def\pilato{\text{\usefont{LGR}{lato-LF}{m}{n}\symbol{112}}} |
| 57 |
\DeclareFontFamily{U}{eur}{\skewchar\font'177} |
| 58 |
\DeclareFontShape{U}{eur}{m}{n}{% |
| 59 |
<-6> eurm5 <6-8> eurm7 <8-> eurm10}{} |
| 60 |
\def\piEuler{\text{\usefont{U}{eur}{m}{n}\symbol{"19}}} |
| 61 |
\def\piSymbol{\text{\usefont{U}{psy}{m}{n}\symbol{`p}}} |
| 62 |
\def\piCharter{\text{\usefont{OML}{mdbch}{m}{n}\symbol{"19}}} |
| 63 |
\def\pikp{\text{\usefont{U}{jkpmia}{m}{it}\symbol{"19}}} |
| 64 |
\pinumber[otherpi] % fourier |
| 65 |
\def\pipx{\text{\usefont{U}{pxmia}{m}{it}\symbol{"19}}} |
| 66 |
\def\pitx{\text{\usefont{U}{txmia}{m}{it}\symbol{"19}}} |
| 67 |
|
| 68 |
\let\updelta\otherdelta |
| 69 |
|
| 70 |
\DisableCrossrefs |
| 71 |
%\CodelineIndex |
| 72 |
%\RecordChanges |
| 73 |
|
| 74 |
\usepackage{hyperref} |
| 75 |
\hypersetup{% |
| 76 |
colorlinks, |
| 77 |
linkcolor=blue, |
| 78 |
citecolor=red, |
| 79 |
pdftitle={mismath}, |
| 80 |
pdfsubject={LaTeX package}, |
| 81 |
pdfauthor={Antoine Missier} |
| 82 |
} |
| 83 |
\begin{document} |
| 84 |
\DocInput{mismath.dtx} |
| 85 |
%\PrintChanges |
| 86 |
%\PrintIndex |
| 87 |
\end{document} |
| 88 |
%</driver> |
| 89 |
% \fi |
| 90 |
% |
| 91 |
% \GetFileInfo{mismath.sty} |
| 92 |
% |
| 93 |
% \title{Miscellaneous mathematical macros \\The \textsf{mismath} package\thanks{This document |
| 94 |
% corresponds to \textsf{mismath}~\fileversion, dated \filedate. |
| 95 |
% Thanks to François Bastouil for initial help in English translation.}} |
| 96 |
% \author{Antoine Missier \\ \texttt{[email protected]}} |
| 97 |
% \date{October 8, 2025} |
| 98 |
% |
| 99 |
% \maketitle |
| 100 |
% \tableofcontents |
| 101 |
% |
| 102 |
% \section{Introduction} |
| 103 |
% |
| 104 |
% According to the International Standards ISO~31-0:1992 to ISO~31-13:1992 |
| 105 |
% (superseded by ISO~80000-2:2009), mathematical \emph{constants} $\e$, $\i$, $\pi$ |
| 106 |
% should be typeset in roman (upright shape) and not in italic like |
| 107 |
% variables (see~\cite{TYPMA}~\cite{NIST}~\cite{SI}~\cite{ICTNS}). |
| 108 |
% This package provides some tools to achieve this automatically. |
| 109 |
% |
| 110 |
% \medskip |
| 111 |
% Even though it is recommended to typeset vectors names |
| 112 |
% in bold italic style~\cite{NIST}~\cite{ICTNS}, |
| 113 |
% they are often represented with arrows, |
| 114 |
% especially in school documents or in physics. |
| 115 |
% To draw nice arrows above vectors, we use the \textsf{esvect} package |
| 116 |
% by Eddie Saudrais~\cite{VECT}. |
| 117 |
% Additionally we provide a few more macros related to vectors with arrows, |
| 118 |
% particularly to improve the typesetting of the norm: $\norm{\vect{AB}}$ |
| 119 |
% instead of the \LaTeX\ version $\lVert\vect{AB}\rVert$, which is not vertically adjusted, |
| 120 |
% or worse $\left\Vert \vect{AB} \right\Vert$ (when using |\left|\ldots |\right|). |
| 121 |
% |
| 122 |
% \smallskip |
| 123 |
% The package also offers other macros to typeset: |
| 124 |
% \begin{itemize} |
| 125 |
% \item tensors in sans serif bold italic shape |
| 126 |
% (ISO recommendation~\cite{TYPMA}~\cite{NIST}~\cite{SI}), |
| 127 |
% \item some standard operator names, |
| 128 |
% \item several commands with useful aliases, |
| 129 |
% \item improved spacings in mathematical formulas, |
| 130 |
% \item systems of equations and small matrices, |
| 131 |
% \item displaymath in double columns for lengthy calculations with short expressions. |
| 132 |
% \end{itemize} |
| 133 |
% |
| 134 |
% To avoid compatibility issues, most of our macros will only be defined |
| 135 |
% if there isn't already a command with the same name in the packages loaded |
| 136 |
% before \textsf{mismath}. If a macro is already defined, |
| 137 |
% a warning message will be displayed and the \textsf{mismath} definition |
| 138 |
% will be ignored. If you wish to keep the \textsf{mismath} or the existing command, |
| 139 |
% you can use |\let\|\meta{command}|\relax|, before loading \textsf{mismath}, or after. |
| 140 |
% |
| 141 |
% \medskip |
| 142 |
% \DescribeEnv{\oarg{options}} |
| 143 |
% The \textsf{mismath} package loads the \textsf{mleftright} |
| 144 |
% \footnote{The \textsf{mleftright} package defines variants \texttt{\string \mleft} |
| 145 |
% and \texttt{\string \mright} of \texttt{\string \left} and \texttt{\string \right}.} |
| 146 |
% package by Heiko Oberdiek~\cite{MLR} and also \textsf{mathtools} |
| 147 |
% \footnote{The \textsf{mathtools} package offers numerous helpful macros and improvements |
| 148 |
% of the \textsf{amsmath} package.} |
| 149 |
% by Morten Høgholm and Lars Madsen~\cite{TOOL} which in turn loads |
| 150 |
% the \mbox{\textsf{amsmath}} package~\cite{AMS}. |
| 151 |
% If you want to use \mbox{\textsf{amsmath}} or \textsf{mathtools} with specific options, |
| 152 |
% you can include these options as options of \mbox{\textsf{mismath}}, or |
| 153 |
% you can load \textsf{amsmath} or \textsf{mathtools} |
| 154 |
% with the desired options before loading \mbox{\textsf{mismath}}. |
| 155 |
% When using the package \mbox{\textsf{unicode-math}}~\cite{UNIC}, \textsf{mismath} |
| 156 |
% should be loaded before \textsf{unicode-math}, just like \textsf{amsmath}. |
| 157 |
% |
| 158 |
% \medskip |
| 159 |
% An ISO recommendation, although rarely followed, is to typeset uppercase |
| 160 |
% Greek letters in italic shape, |
| 161 |
% as for other variables~\cite{ICTNS}. This is automatically achieved, |
| 162 |
% for some particular fonts, with packages |
| 163 |
% such as \textsf{fixmath} by Walter Schmidt~\cite{FIXM}, |
| 164 |
% \mbox{\textsf{isomath}} by Günter Milde~\cite{ISOM} |
| 165 |
% or \textsf{pm-isomath} by Claudio Beccari~\cite{PMISO} and optionally with many others |
| 166 |
% (such as \textsf{mathpazo} or \textsf{mathptmx} with the option \texttt{slantedGreek}). |
| 167 |
% When running through \LuaLaTeX\ or \XeLaTeX\ you can also get this result |
| 168 |
% with the option \mbox{\texttt{math-style=ISO}} provided |
| 169 |
% by the \textsf{unicode-math} package. |
| 170 |
% We also have the new \mbox{\textsf{mathgreeks}} package~\cite{MGREEK} which offers |
| 171 |
% a wide range of fonts and different settings with Greek letters. |
| 172 |
% However this feature is not implemented here due to a conflicting rule in France, |
| 173 |
% where all capital letters in mathematics |
| 174 |
% are required to be typeset in upright shape |
| 175 |
% \footnote{The \textsf{frenchmath} package~\cite{FR} |
| 176 |
% ensures to follow the recommended French rules.}. |
| 177 |
% The user is free to choose loading one of these packages or not. |
| 178 |
% |
| 179 |
% |
| 180 |
% \section{Usage} |
| 181 |
% |
| 182 |
% \subsection{Mathematical constants} |
| 183 |
% |
| 184 |
% \DescribeMacro{\mathup} |
| 185 |
% As for classic functions identifiers, \emph{predefined} mathematical constants |
| 186 |
% should be typeset in upright shape (typically in roman family), |
| 187 |
% but this practice is not sufficiently respected, probably because it's a bit tedious. |
| 188 |
% A first solution is to use the |\mathup| macro, |
| 189 |
% which is preferable to |\mathrm| |
| 190 |
% \footnote{The \texttt{\string \mathup} macro is based on \texttt{\string \operatorfont}, |
| 191 |
% which comes from the |
| 192 |
% \textsf{amsopn} package, automatically loaded by \textsf{amsmath}. |
| 193 |
% In \textsf{beamer}, the default math font is sans serif, |
| 194 |
% but \texttt{\string \mathrm} produces a font with serifs, which might not match the |
| 195 |
% overall style of the presentation. Hence, using \texttt{\string \mathup} is indeed |
| 196 |
% a better choice in \textsf{beamer} presentations to ensure that mathematical |
| 197 |
% constants are typeset in upright shape and consistent |
| 198 |
% with the default sans serif math font.}, |
| 199 |
% for setting any group of letters in roman. For example you can use |
| 200 |
% |\mathup{e}| to get the Euler's number. |
| 201 |
% |
| 202 |
% \pagebreak |
| 203 |
% \DescribeMacro{\e} \DescribeMacro{\i} \DescribeMacro{\j} |
| 204 |
% To avoid cluttering a document that contains many occurrences of Euler's number $\e$, |
| 205 |
% or imaginary number $\i$, with |\mathup{e}| or |\mathup{i}|, |
| 206 |
% the package provides the |\e| command for Euler's number |
| 207 |
% and |\i| or |\j| for imaginary numbers. |
| 208 |
% Let us notice that |\i| and |\j| already exist in \LaTeX. In LR (left-to-right) mode, |
| 209 |
% they produce \mbox{`\i,\ \j'} without the dot, |
| 210 |
% allowing you to place accents on them. |
| 211 |
% However, in mathematical mode, they produce the warning |
| 212 |
% ``\texttt{LaTeX Warning: Command \string \i\space invalid in math mode on input line} |
| 213 |
% \meta{line}''. |
| 214 |
% With the new definition provided by the package, |\i| and |\j| will be redefined |
| 215 |
% specifically for mathematical mode. |
| 216 |
% |
| 217 |
% \medskip |
| 218 |
% \DescribeMacro{\MathUp} |
| 219 |
% Indeed, typing a lot of backslashes for constants like $\e$, $\i$, or $\j$ |
| 220 |
% in a document with numerous formulas using them can become tiresome. |
| 221 |
% To alleviate this, the package proposes another solution |
| 222 |
% with the macro |\MathUp|\marg{char}. |
| 223 |
% For example, when |\MathUp{e}| is called, any subsequent occurrence of $\e$ |
| 224 |
% will automatically be set in roman (upright shape), |
| 225 |
% without the need to type |\e| explicitly. The effect of this macro |
| 226 |
% can be either global or local, depending on whether it is used outside or inside an |
| 227 |
% environment or braces. |
| 228 |
% Furthermore, you can also call this macro in the preamble, then the change will apply |
| 229 |
% from the beginning of the document. This powerful command allows you |
| 230 |
% to bring a document up to the standards effortlessly and without changing anything |
| 231 |
% in your mathematical formulas. |
| 232 |
% In fact, |\MathUp| can be applied to any valid single character, |
| 233 |
% offering flexibility for various use cases |
| 234 |
% \footnote{Another use of it with probability |
| 235 |
% will be presented in section \ref{operators}.}. |
| 236 |
% |
| 237 |
% \medskip |
| 238 |
% \DescribeMacro{\MathIt} |
| 239 |
% When there are other occurrences of $e$, $i$ or $j$ as variables, |
| 240 |
% you can still obtain italicized $e$, $i$ or $j$ using \LaTeX\ |
| 241 |
% commands |\mathit| or |\mathnormal|, which are useful for a single use. |
| 242 |
% However, you also have the option to use the inverse switch |\MathIt|\marg{char}, |
| 243 |
% which has a global effect when used outside environments or braces, |
| 244 |
% or a local effect when used inside them. |
| 245 |
% Similar to |\MathUp|, |\MathIt| can be applied to any single character. |
| 246 |
% |
| 247 |
% \medskip |
| 248 |
% \DescribeMacro{\MathNumbers} \DescribeMacro{\MathNormal} |
| 249 |
% These macros enable you to set upright or normal (italic) typesetting |
| 250 |
% for multiple letters in a single command. |
| 251 |
% For instance, |\MathNumbers{e,i}| is equivalent to |\MathUp{e}\MathUp{i}|. |
| 252 |
% In |\MathNumbers|, the comma separator between letters can be modified |
| 253 |
% or removed as needed. In fact, this macro only affects the letters e, i, or j; |
| 254 |
% it has no effect on other characters. |
| 255 |
% On the other hand, |\MathNormal| accepts any comma-separated list of arguments. |
| 256 |
% This means you can apply the normal italic math mode typesetting to various letters |
| 257 |
% at once using |\MathNormal|. |
| 258 |
% |
| 259 |
% \medskip |
| 260 |
% \DescribeMacro{\enumber}\DescribeMacro{\inumber}\DescribeMacro{\jnumber} |
| 261 |
% These three commands, used until version 2.2 but only functioning within the preamble, |
| 262 |
% serve now as aliases for the commands |\MathUp{e}|, |\MathUp{i}| or |\MathUp{j}|, |
| 263 |
% so they can be used anywhere |
| 264 |
% in the document or preamble and has an inverse switch with |\MathIt|. |
| 265 |
% |
| 266 |
% \medskip |
| 267 |
% \DescribeMacro{\pinumber[\meta{option}]} |
| 268 |
% The constant $\pi$ should also be typeset in upright shape |
| 269 |
% (see~\cite{TYPMA}, \cite{NIST}, \cite{ICTNS}), which is different from italicized $\itpi$. |
| 270 |
% However, this recommendation is even less commonly followed compared to the one |
| 271 |
% concerning $\e$ and $\i$~\cite{TYPMA}. |
| 272 |
% Thanks to the |\pinumber| command, the italic $\itpi$ will be replaced |
| 273 |
% with an upright $\pi$ |
| 274 |
% each time |\pi| is called. Thus |\pinumber| makes your document compliant with standards |
| 275 |
% without changing the source code of your mathematical formulas. |
| 276 |
% It functions in two different ways. |
| 277 |
% |
| 278 |
% \begin{enumerate} |
| 279 |
% \item You can load a Greek letters package that provides the glyphs in upright shape. |
| 280 |
% There are many available. |
| 281 |
% Notably, let us mention \textsf{upgreek}~\cite{GREEK}, |
| 282 |
% \mbox{\textsf{mathdesign}}~\cite{DESIGN}, |
| 283 |
% \mbox{\textsf{kpfonts}}~\cite{KPF}, |
| 284 |
% \mbox{\textsf{fourier}}~\cite{FOUR} (used in the present document), but also |
| 285 |
% \mbox{\textsf{pxgreeks}} (using \textsf{pxfonts}~\cite{PX}), \mbox{\textsf{txgreeks}} |
| 286 |
% (using \textsf{txfonts}~\cite{TX}) |
| 287 |
% \footnote{When using \textsf{pxgreeks} or \textsf{txgreeks}, |
| 288 |
% they should be loaded \emph{after} \textsf{mismath} to avoid an error |
| 289 |
% due to conflict with the existing macros \texttt{\string\iint}, \texttt{\string\iiint}, |
| 290 |
% \texttt{\string\iiiint}, \texttt{\string\idotsint} in \textsf{amsmath}.}, |
| 291 |
% \mbox{\textsf{libertinust1math}}~\cite{LIB}, \textsf{libgreek}, etc. |
| 292 |
% A special mention goes to \textsf{lgrmath} of Jean-François Burnol~\cite{LGR} |
| 293 |
% which allows the use of any Greek LGR-encoded font in math mode, |
| 294 |
% an idea taken up in \textsf{mathgreeks}~\cite{MGREEK}. |
| 295 |
% Also note \textsf{newtxmath}~\cite{NTX} which has several font options. |
| 296 |
% These packages provide commands like |\uppi| (\textsf{upgreek}, \textsf{mathgreeks}), |
| 297 |
% |\piup| (\textsf{mathdesign}, \textsf{kpfonts}, \textsf{lgrmath}), |
| 298 |
% |\otherpi| (\textsf{fourier}), etc. |
| 299 |
% \footnote{They have also options to typeset all the Greek lowercase |
| 300 |
% letters in upright shape by default, but this in not our goal here.} |
| 301 |
% |
| 302 |
% In this case, |\pinumber| must be called in the preamble |
| 303 |
% with an optional argument being the name of the command, \emph{without the backslash}, |
| 304 |
% giving access to the upright pi: |
| 305 |
% \texttt{piup}, \texttt{uppi}, \texttt{otherpi}\ldots |
| 306 |
% However, installing such a Greek letters package will modify |
| 307 |
% all the other Greek letter glyphs. |
| 308 |
% ^^A even if, except for pi, they will be in italics. |
| 309 |
% |
| 310 |
% By calling in the preamble |\MathNumbers{ei}\pinumber[otherpi]| |
| 311 |
% (assuming the \textsf{fourier} package is loaded), |
| 312 |
% you can achieve the following result: |
| 313 |
% \begin{center} |
| 314 |
% |$e^{i\pi} = -1$| \quad yields \quad $\e^{\i\pi}=-1$. |
| 315 |
% \end{center} |
| 316 |
% |
| 317 |
% \item Without installing a package, it is possible to change only the glyph of pi |
| 318 |
% without altering the other Greek letters, |
| 319 |
% which are typically in italics. |
| 320 |
% |
| 321 |
% In this case, |\pinumber| must be called in the preamble with an optional argument |
| 322 |
% of the \texttt{key=value} type. The key name corresponds to a package |
| 323 |
% providing the same glyph. |
| 324 |
% The following table summarizes the available options. |
| 325 |
% When a key is given without a value, |\pinumber| will choose a default value |
| 326 |
% specified in the text list following the table. |
| 327 |
% |
| 328 |
% \begin{center} |
| 329 |
% \setlength{\extrarowheight}{1pt} |
| 330 |
% \begin{tabular}{>{\ttfamily}l>{$}c<{$}} |
| 331 |
% \hline |
| 332 |
% {\normalfont Option} lgrmath=... & \mbox{Result} \\ |
| 333 |
% \hline |
| 334 |
% Alegreya-LF & \piAlegreya \\ |
| 335 |
% Cochineal-LF & \piCochineal \\ |
| 336 |
% LibertinusSerif-LF & \piLibSerif \\ |
| 337 |
% LibertinusSans-LF & \piLibSans \\ |
| 338 |
% lmr & \pilmr \\ |
| 339 |
% lmss & \pilmss \\ |
| 340 |
% gentium & \pigentium\\ |
| 341 |
% lato-LF & \pilato \\ |
| 342 |
% \hline |
| 343 |
% \end{tabular} |
| 344 |
% \qquad |
| 345 |
% \begin{tabular}{>{\ttfamily}l>{$}c<{$}} |
| 346 |
% \hline |
| 347 |
% \normalfont Other options & \mbox{Result} \\ |
| 348 |
% \hline |
| 349 |
% fontspec=\ldots & \ldots \\ |
| 350 |
% upgreek=Euler & \piEuler \\ |
| 351 |
% upgreek=Symbol & \piSymbol \\ |
| 352 |
% mathdesign & \piCharter \\ |
| 353 |
% kpfonts & \pikp \\ |
| 354 |
% fourier & \pi\\ |
| 355 |
% pxfonts & \pipx \\ |
| 356 |
% txfonts & \pitx \\ |
| 357 |
% \hline |
| 358 |
% \end{tabular} |
| 359 |
% \end{center} |
| 360 |
% |
| 361 |
% \medskip |
| 362 |
% \begin{itemize} |
| 363 |
% |
| 364 |
% \item With the \texttt{lgrmath} key, we actually have numerous possibilities |
| 365 |
% for values (any Greek letters math font in LGR encoding). |
| 366 |
% The documentation of the \textsf{lgrmath} |
| 367 |
% package explains how to check an visualize all available fonts on your distribution. |
| 368 |
% We have only presented eight of them. The default value is \texttt{lmr}. |
| 369 |
% Other interesting values are \texttt{NotoSerif-LF}, \texttt{Clara-TLF}, |
| 370 |
% \texttt{droidserif}, \texttt{fct}, \texttt{llcmss}. |
| 371 |
% |
| 372 |
% \item When |\pinumber| is called without an argument in the preamble, |
| 373 |
% it corresponds to the option \texttt{lgrmath=lmr}. |
| 374 |
% This $\pilmr$ character is well-suited |
| 375 |
% for use with the Latin Modern font family |
| 376 |
% \footnote{It will look the same as the one provided by \texttt{lgrmath=cmr} or by |
| 377 |
% Günter Milde's \textsf{textalpha} package~\cite{ALPHA}.}. |
| 378 |
% |
| 379 |
% \item With the \texttt{fontspec} key, there are also many possible values, |
| 380 |
% corresponding to the TrueType or OpenType fonts installed on your system |
| 381 |
% (works with \LuaLaTeX\ or \XeLaTeX). |
| 382 |
% See the \textsf{mathgreeks} documentation for examples. |
| 383 |
|
| 384 |
% \item With the \texttt{upgreek} key, the default value is \texttt{Symbol}. |
| 385 |
% There is a third possible value, \texttt{Symbolsmallscale}, |
| 386 |
% which provides the same character as \texttt{Symbol} but reduced in size by 10\,\%. |
| 387 |
% |
| 388 |
% \item With the \texttt{mathdesign} key, there are actually 3 possible values: |
| 389 |
% \texttt{Utopia}, \texttt{Garamond} or \texttt{Charter} (the default value), |
| 390 |
% but the glyphs obtained for pi look quite similar. |
| 391 |
% |
| 392 |
% \item With the \texttt{kpfonts} key, we have two possible values: |
| 393 |
% \texttt{normal} (default) and \texttt{light}. The option \texttt{kpfonts=light} |
| 394 |
% provides a slightly less bold character. |
| 395 |
% |
| 396 |
% \item The last keys, \texttt{fourier} (based on Utopia), \texttt{pxfonts} |
| 397 |
% (based on Palatino), |
| 398 |
% \texttt{txfonts} (based on Times) |
| 399 |
% are booleans whose default value is \texttt{true} (when called). |
| 400 |
% The \texttt{txfonts} key yields the same glyph than \texttt{lgrmath=txr}. |
| 401 |
% |
| 402 |
% \end{itemize} |
| 403 |
% \end{enumerate} |
| 404 |
% |
| 405 |
% The \textsf{unicode-math} package~\cite{UNIC} provides |\uppi|, so you can use |
| 406 |
% |\pinumber[uppi]| to produce automatic upright pi in the selected math font, |
| 407 |
% but a math font must have been explicitly chosen with |\setmathfont|. |
| 408 |
% You can also use the \texttt{fontspec} key option, |
| 409 |
% \eg |\pinumber[fontspec=STIX Two Math]|, |
| 410 |
% to obtain pi in any font |
| 411 |
% that is supported by \textsf{unicode-math}. |
| 412 |
% |
| 413 |
% For other fonts, it can be quite complicated to make Greek letters packages |
| 414 |
% work with \textsf{unicode-math}. In any case, such a package must be loaded |
| 415 |
% after \textsf{unicode-math} and in |\AtBeginDocument|. |
| 416 |
% However, |\pinumber| supports \textsf{unicode-math} very well with any previous |
| 417 |
% \texttt{key=value} option, by calling |\pinumber|\oarg{option} |
| 418 |
% after \textsf{unicode-math}. |
| 419 |
% |
| 420 |
% \medskip |
| 421 |
% \DescribeMacro{\itpi} |
| 422 |
% When you activate |\pinumber|, the original italic $\itpi$ |
| 423 |
% is still accessible using |\itpi|. |
| 424 |
% |
| 425 |
% \medskip |
| 426 |
% \DescribeMacro{\pinormal} |
| 427 |
% In fact, |\pinumber| is a toggle, with its inverse toggle being |\pinormal|. |
| 428 |
% The latter restores the |\pi| command to its default behavior. |
| 429 |
% Thus, |\pinumber| can be used anywhere in the document (like |\pinormal|), |
| 430 |
% but then without arguments and provided it has been initially called in the preamble, |
| 431 |
% according to the procedures outlined above. |
| 432 |
% |
| 433 |
% \subsection{Vectors (and tensors)} |
| 434 |
% |
| 435 |
% \DescribeMacro{\vect} |
| 436 |
% By default, the |\vect| command |
| 437 |
% \footnote{The definition of most macros in this package, |
| 438 |
% will only take effect if the macro has not been previously |
| 439 |
% defined by another package. This ensures compatibility and avoids conflicts |
| 440 |
% when using the \textsf{mismath} package with other \LaTeX\ packages.}, |
| 441 |
% produces vectors with arrows |
| 442 |
% (thanks to the \textsf{esvect} package by Eddie Saudrais |
| 443 |
% \footnote{\textsf{esvect} provides the \texttt{\string \vv} macro |
| 444 |
% used by \texttt{\string \vect}.}) |
| 445 |
% which are more elegant than those produced by \LaTeX's |\overrightarrow| command. |
| 446 |
% The \textsf{esvect} package has an optional argument |
| 447 |
% (a single letter between \texttt{a} and \texttt{h}) to define |
| 448 |
% the desired type of arrow (see~\cite{VECT}). |
| 449 |
% In \textsf{mismath}, \textsf{esvect} is loaded with the option \texttt{b}: |
| 450 |
% |\vect{AB}| gives $\vect{AB}$. |
| 451 |
% If you wish to use a different type of arrow, you must call \textsf{esvect} |
| 452 |
% with the appropriate option \emph{before} loading \textsf{mismath}. |
| 453 |
% For example, using |\usepackage[d]{esvect}| |
| 454 |
% will provide the same arrows that are used by default in~\cite{VECT}. |
| 455 |
% |
| 456 |
% \medskip |
| 457 |
% \DescribeMacro{\boldvect} |
| 458 |
% The |\vect| macro allows vector names to be typeset using bold italic font, |
| 459 |
% as recommended by ISO~\cite{NIST}~\cite{SI}, instead of using arrows. |
| 460 |
% To achieve this, call the |\boldvect| command, it will modify the behavior of |\vect| |
| 461 |
% locally or globally, depending on its placement in the document (inside or outside |
| 462 |
% a group or an environment):\\[2ex] |
| 463 |
% \begin{minipage}{8cm} |
| 464 |
% \begin{verbatim} |
| 465 |
%\[ \boldvect \vect{v} |
| 466 |
% =\lambda\vect{e}_x+\mu\vect{e}_y \] |
| 467 |
% \end{verbatim} |
| 468 |
% \end{minipage} |
| 469 |
% \begin{minipage}{4cm}\vspace{-2ex} |
| 470 |
% $\boldvect \vect{v}=\lambda\vect{e}_x +\mu\vect{e}_y$ |
| 471 |
% \end{minipage} |
| 472 |
% |
| 473 |
% \DescribeMacro{\boldvectcommand} |
| 474 |
% By default |\boldvect| uses the |\boldsymbol| command |
| 475 |
% \footnote{\texttt{\string \mathbf} produces upright bold font, |
| 476 |
% even when used in combination with \texttt{\string \mathit}.} |
| 477 |
% from the \textsf{amsbsy} package, which is automatically loaded by \textsf{amsmath}. |
| 478 |
% However, you may prefer other packages that produce bold italic fonts, |
| 479 |
% such as \textsf{fixmath} with the |\mathbold| command, |
| 480 |
% \textsf{isomath} with |\mathbfit| |
| 481 |
% or \textsf{bm} with the |\bm| command; |
| 482 |
% \textsf{unicode-math} provides the |\symbfit| command. |
| 483 |
% To use an alternative command instead of |\boldsymbol| in \mbox{\textsf{mismath}}, |
| 484 |
% redefine |\boldvectcommand|, |
| 485 |
% for instance if \textsf{fixmath} is loaded: |
| 486 |
% |
| 487 |
% \medskip |
| 488 |
% \centeredline{|\renewcommand\boldvectcommand{\mathbold}|} |
| 489 |
% |
| 490 |
% \medskip |
| 491 |
% According to ISO rules, symbols for matrices are also in bold italic. |
| 492 |
% Therefore you can also use |\vect| with |\boldvect| for matrices, or create another alias. |
| 493 |
% |
| 494 |
% \medskip |
| 495 |
% \DescribeMacro{\arrowvect} |
| 496 |
% At any moment, you can revert to the default behavior using the inverse switch |
| 497 |
% |\arrowvect|. |
| 498 |
% These switches can be placed anywhere, whether |
| 499 |
% inside mathematical mode or within an environment (with a local effect) or outside |
| 500 |
% (with a global effect). |
| 501 |
% |
| 502 |
% \medskip |
| 503 |
% \DescribeMacro{\hvect} |
| 504 |
% When vectors with arrows are typeset side by side, |
| 505 |
% the arrows can be set up slightly higher using |\hvect| |
| 506 |
% (which places a vertical phantom box containing `$A$') |
| 507 |
% to prevent inelegant effects. For example, writing |
| 508 |
% \begin{itemize} |
| 509 |
% \item $\vect{AB}=\hvect{u} + \vect{AC}$, obtained with |\hvect{u}|, |
| 510 |
% looks better than $\vect{AB}=\vect{u}+ \vect{AC}$; |
| 511 |
% \item $\hvect{a} \cdot \vect{b}=0$, obtained with |\hvect{a}|, |
| 512 |
% looks better than $\vect{a} \cdot \vect{b}=0$. |
| 513 |
% \end{itemize} |
| 514 |
% This adjustment ensures a nicer appearance when vectors |
| 515 |
% with arrows are combined in an equation |
| 516 |
% \footnote{For a fine tuning you can also use the \texttt{\string\vstrut} or |
| 517 |
% \texttt{\string\cstrut} macros from the \textsf{spacingtricks} package~\cite{SPA}.}. |
| 518 |
% The |\boldvect| and |\arrowvect| switches have the same effect on |\hvect| |
| 519 |
% as they do on |\vect|. |
| 520 |
% |
| 521 |
% \DescribeMacro{\hvec} |
| 522 |
% In a similar way, |\hvec| raises the little arrow produced by |
| 523 |
% the \LaTeX\ command |\vec|, to the height of the letter `$A$' |
| 524 |
% (but |\boldvect| have no effect on |\vec| nor |\hvec|): |
| 525 |
% \begin{itemize} |
| 526 |
% \item $\mathcal{P}=\vec{f}\cdot\hvec{v}$, obtained with |\hvec{v}|, |
| 527 |
% seems better than $\mathcal{P}=\vec{f}\cdot\vec{v}$; |
| 528 |
% ^^A (the result of |\vec| with \textsf{fourier} may be bad with high letters, \eg $\vec{h}$) |
| 529 |
% \item $\vec{f} =m \hvec{a}$, obtained with |\hvec{a}|, |
| 530 |
% seems better than $\vec{f} =m \vec{a}$. |
| 531 |
% \end{itemize} |
| 532 |
% |
| 533 |
% \DescribeMacro{\norm} |
| 534 |
% The norm of a vector is conventionally represented using the delimiters |\lVert| and |\rVert| |
| 535 |
% (or |\|$\mid$ unless a plus (+) or minus (-) sign follows the opening delimiter) |
| 536 |
% or |\left\Vert| and |\right\Vert| |
| 537 |
% for adaptive delimiters. Unfortunately, these delimiters |
| 538 |
% are always vertically centered, relatively to the mathematical center line, |
| 539 |
% whereas vectors with arrows are asymmetric objects. |
| 540 |
% The code |$\norm{\vec{h}}$| raises the double bar to produce $\norm{\vec{h}}$ |
| 541 |
% instead of $\Vert\vec{h}\Vert$ or $\left\Vert \vec{h} \right\Vert$. |
| 542 |
% Let's notice that the height of the bars don't adjust to content, |
| 543 |
% but however to context: main text, subscripts or exponents, |
| 544 |
% \eg $X^{\norm{\vec{h}}}$. |
| 545 |
% This macro is useful only for arguments of special height, such as $\vec{h}$ or $\vect{AB}$ |
| 546 |
% and may give bad results in other situations. |
| 547 |
% |
| 548 |
% \medskip |
| 549 |
% \DescribeMacro{\mathbfsfit}\DescribeMacro{\tensor} |
| 550 |
% For tensors symbols, ISO rules recommend using |
| 551 |
% sans serif bold italic, but there |
| 552 |
% is no such math alphabet in the default \LaTeX\ mathematical style. |
| 553 |
% However, the \mbox{\textsf{mismath}} package defines this alphabet |
| 554 |
% (assuming the font encoding and package you use permits it) |
| 555 |
% and provides the macro |\mathbfsfit| or its alias |\tensor|. |
| 556 |
% By writing |\tensor{S}\otimes\tensor{T}|, you get $\tensor{S}\otimes\tensor{T}$. |
| 557 |
% |
| 558 |
% \subsection{Standard operator names}\label{operators} |
| 559 |
% |
| 560 |
% \DescribeMacro{\di} |
| 561 |
% The \emph{differential} operator should be typeset in upright shape, not in |
| 562 |
% italics, to distinguish it from variables |
| 563 |
% (as mentioned in \cite{TYPMA}~\cite{NIST}~\cite{ICTNS}~\cite{LSHORT}). |
| 564 |
% To achieve this, we provide the |\di| command. |
| 565 |
% Take a look at the following examples (notice the thin spaces before the d, |
| 566 |
% just like with classic function's names): \\[2ex] |
| 567 |
% \begin{minipage}{7cm} |
| 568 |
% \begin{verbatim} |
| 569 |
%\[ \iint xy\di x\di y \] |
| 570 |
% \end{verbatim} |
| 571 |
% \end{minipage} |
| 572 |
% \begin{minipage}{5cm} |
| 573 |
% \[ \iint xy\di x\di y \] |
| 574 |
% \end{minipage} |
| 575 |
% \\[0.5ex] |
| 576 |
% \begin{minipage}{7cm} |
| 577 |
% \begin{verbatim} |
| 578 |
%\[ m\frac{\di^2x}{\di t^2} |
| 579 |
% + h\frac{\di x}{\di t} + kx = 0 \] |
| 580 |
% \end{verbatim} |
| 581 |
% \end{minipage} |
| 582 |
% \begin{minipage}{5cm} |
| 583 |
% \[m\frac{\di^2x}{\di t^2}+h\frac{\di x}{\di t}+kx=0\] |
| 584 |
% \end{minipage} |
| 585 |
% |
| 586 |
% The command |\di| can also represent the \emph{distance}, hence its name: |
| 587 |
% \[\di(u, \cmmathcal{H}) = \frac{\abs{\langle u,v\rangle}}{\lVert v \rVert}.\] |
| 588 |
% |
| 589 |
% \DescribeMacro{\opDelta} \DescribeMacro{\opdelta} |
| 590 |
% Two other `difference' operators allow for expressing variations ($\opDelta$) |
| 591 |
% or small variations ($\opdelta$). |
| 592 |
% They are obtained using the |\opDelta| and |\opdelta| commands. |
| 593 |
% \begin{align*} |
| 594 |
% \opDelta f \approx \opDelta h = f'(x_0) \opDelta x && |
| 595 |
% \frac{\opdelta T}{T}=\frac{1}{2}\frac{\opdelta l}{l} && |
| 596 |
% h= \opdelta x\opdelta y |
| 597 |
% \end{align*} |
| 598 |
% |
| 599 |
% Like |\di|, these operators use specific spacing and are typeset using |
| 600 |
% the upright Greek letters given by |\updelta| and |\upDelta|. |
| 601 |
% By default |\upDelta| is an alias for |\Delta| (which is supposed to be in upright shape); |
| 602 |
% |\updelta| is not provided by \textsf{mismath} but can be obtained with |
| 603 |
% other packages such as \textsf{mathgreeks}~\cite{MGREEK}, |
| 604 |
% \mbox{\textsf{unicode-math}}~\cite{UNIC}, |
| 605 |
% or as an alias for the upright delta provided by other fonts |
| 606 |
% \footnote{With \textsf{fourier} (without the \texttt{upright} option) we have used |
| 607 |
% \texttt{\string\let\string\updelta\string\otherdelta}.}. |
| 608 |
% |
| 609 |
% \DescribeMacro{\P} \DescribeMacro{\E} |
| 610 |
% To refer to probability |
| 611 |
% \footnote{\LaTeX\ provides also \texttt{\string \Pr} which gives $\Pr$.} |
| 612 |
% and expectation the proper use is to typeset the capital letters $\P$, $\E$ |
| 613 |
% in roman just like any standard function identifier. |
| 614 |
% This can be achieved with |\P| and |\E| commands. |
| 615 |
% |
| 616 |
% \medskip |
| 617 |
% \DescribeMacro{\Par} |
| 618 |
% The |\P| command already existed to refer to the `end of paragraph' symbol (\Par) |
| 619 |
% and has been redefined, but this symbol can still be obtained with |\Par|. |
| 620 |
% |
| 621 |
% \medskip |
| 622 |
% \DescribeMacro{\V} |
| 623 |
% Variance is generally denoted by $\var$ or $\Var$ (see the following table), |
| 624 |
% but some authors prefer to use $\V$, which can be produced using |\V|. |
| 625 |
% |
| 626 |
% \DescribeMacro{\MathProba}\DescribeMacro{\MathNormal} |
| 627 |
% As for $\e$, $\i$ or $\j$, you can use |\MathUp{P}|, |\MathUp{E}| |
| 628 |
% or |\MathUp{V}| to avoid typing many |\P|, |\E| or |\V|. |
| 629 |
% However you can also achieve this in a single command with |\MathProba|, |
| 630 |
% for example |\MathProba{PE}|. We get the inverse toggle with |
| 631 |
% |\MathIt| for any individual letter or |\MathNormal| for a comma-separated list. |
| 632 |
% |
| 633 |
% \medskip |
| 634 |
% \DescribeMacro{\probastyle} |
| 635 |
% Some authors use double-struck font shape to represent probability, expectation |
| 636 |
% and variance: $\mathbb{P}, \mathbb{E}, \mathbb{V}$. |
| 637 |
% The |\probastyle| macro sets the appearance of |\P|, |\E| and |\V|. |
| 638 |
% For instance |\renewcommand\probastyle{\mathbb}| |
| 639 |
% \footnote{The effect of this redefinition is global or local to the container environment |
| 640 |
% in which it is used.} |
| 641 |
% brings the double-struck letters. |
| 642 |
% The |\mathbb| command is provided by \textsf{amsfonts} package |
| 643 |
% (which needs to be loaded in the preamble), but also by other complete math font |
| 644 |
% packages such as \mbox{\textsf{mathdesign}}, \textsf{kpfonts}, \textsf{fourier}, |
| 645 |
% \textsf{unicode-math}\ldots |
| 646 |
% \hypertarget{nofunction}{} |
| 647 |
% |
| 648 |
% \pagebreak |
| 649 |
% The following standard operator names are defined in \textsf{mismath}: |
| 650 |
% \begin{center} |
| 651 |
% \begin{tabular}{rlrlrl} |
| 652 |
% |\adj| & $\adj$ \qquad\mbox{} & |\End| & $\End$ \qquad\mbox{} & |\Res| & $\Res$ \\ |
| 653 |
% |\Aut| & $\Aut$ & |\erf| & $\erf$ & |\rot| & $\rot$ \\ |
| 654 |
% |\codim| & $\codim$ & |\grad| & $\grad$ & |\sgn| & $\sgn$ \\ |
| 655 |
% |\coker| & $\coker$ & |\id| & $\id$ & |\sinc| & $\sinc$ \\ |
| 656 |
% |\Conv| & $\Conv$ & |\Id| & $\Id$ & |\spa| & $\spa$ \\ |
| 657 |
% |\Cov| & $\Cov$ & |\im| & $\im$ & |\tr| & $\tr$ \\ |
| 658 |
% |\cov| & $\cov$ & |\lb| & $\lb$ & |\var| & $\var$ \\ |
| 659 |
% |\curl| & $\curl$ & |\lcm| & $ \lcm$ & |\Var| & $\Var$ \\ |
| 660 |
% |\divg| & $\divg$ & |\rank| & $\rank$ & |\Zu| & $\Zu$ |
| 661 |
% \end{tabular} |
| 662 |
% \end{center} |
| 663 |
% |
| 664 |
% By default, operators returning vectors, |\grad| and |\curl| (or its synonym |\rot| |
| 665 |
% rather used in Europe), are written with an arrow on the top. |
| 666 |
% When |\boldvect| is activated, they are typeset in bold style: |
| 667 |
% $\boldvect \grad, \curl, \rot$. |
| 668 |
% For the variance, the covariance and the identity function, |
| 669 |
% two notations are proposed, with or without a first capital letter, |
| 670 |
% because both are very common. |
| 671 |
% Please note that |\div| already exists ($\div$) and |\span| is a \TeX\ primitive; |
| 672 |
% they haven't been redefined. Therefore the provided macros are called |\divg| (divergence) |
| 673 |
% and |\spa| (span of a set of vectors). |
| 674 |
% Furthermore |\Z| is used to denote the set of integers (see \ref{aliases}), |
| 675 |
% which is why we propose |\Zu|, |
| 676 |
% to designate the center of a group: $\Zu(G)$ (from German Zentrum). |
| 677 |
% |
| 678 |
% \medskip |
| 679 |
% The \textsf{mismath} package also provides some (inverse) circular or hyperbolic functions, |
| 680 |
% that are missing in \LaTeX: |
| 681 |
% \begin{center} |
| 682 |
% \begin{tabular}{rlrlrl} |
| 683 |
% |\arccot| & $\arccot$\qquad\mbox{} & |\arsinh| & $\arsinh$\qquad\mbox{} |
| 684 |
% & |\arcoth| & $\arcoth$ \\ |
| 685 |
% |\sech| & $\sech$ & |\arcosh| & $\arcosh$ & |\arsech| & $\arsech$ \\ |
| 686 |
% |\csch| & $\csch$ & |\artanh| & $\artanh$ & |\arcsch| & $\arcsch$ |
| 687 |
% \end{tabular} |
| 688 |
% \end{center} |
| 689 |
% |
| 690 |
% \DescribeMacro{[nofunction]} |
| 691 |
% Some may find that the definition of all these operators and functions is not useful |
| 692 |
% for their needs. So, the definitions of standard operators and functions in both |
| 693 |
% previous tables can be disabled with the \texttt{nofunction} option. |
| 694 |
% \hypertarget{classicReIm}{} |
| 695 |
% |
| 696 |
% \medskip |
| 697 |
% \DescribeMacro{\Re} \DescribeMacro{\Im} |
| 698 |
% The |\Re| and |\Im| macros refer to real and imaginary part |
| 699 |
% of a complex number. They have been redefined to produce $\mathup{Re}$ and $\mathup{Im}$, |
| 700 |
% in place of outdated symbols $\oldRe$ and $\oldIm$. |
| 701 |
% Nevertheless, it is still possible to obtain the old symbols |
| 702 |
% with |\oldRe| and |\oldIm|. |
| 703 |
% |
| 704 |
% \DescribeMacro{[otherReIm]} |
| 705 |
% An alternative notation $\Re$, $\Im$ is provided by invoking the \texttt{otherReIm} |
| 706 |
% package option, |
| 707 |
% \DescribeMacro{[classicReIm]} |
| 708 |
% whereas the \texttt{classicReIm} option deactivates these redefinitions. |
| 709 |
% |
| 710 |
% \DescribeMacro{\bigO} \DescribeMacro{\bigo} \DescribeMacro{\lito} |
| 711 |
% Asymptotic comparison operators (in Bachmann-Landau notation) are obtained with |
| 712 |
% |\bigO| or |\bigo| and |\lito| commands. The first one uses |
| 713 |
% the |\cmmathcal| alphabet and the last two compose the letters `O' and `o' in |
| 714 |
% roman, as for any operator: |
| 715 |
% \[ n^2+\bigO(n\log n) \txt{or} n^2+\bigo(n\log n)\txt{and} |
| 716 |
% \e^x=1+x+\frac{x^2}{2}+\lito\bigl(x^2\bigr).\] |
| 717 |
% |
| 718 |
% \subsection{A few useful aliases} \label{aliases} |
| 719 |
% |
| 720 |
% In the tradition of Bourbaki and D.~Knuth, proper use requires |
| 721 |
% that classic sets of numbers are typeset in bold roman: |
| 722 |
% $\R, \C, \Z, \N, \Q$, |
| 723 |
% whereas double-struck letters |
| 724 |
% ($\mathbb{R}, \mathbb{C}, \mathbb{Z}, \mathbb{N}, \mathbb{Q}$) |
| 725 |
% are reserved for writing at the blackboard~\cite{LSHORT}. |
| 726 |
% Similarly, to designate a field we use $\F$ or $\K$ (Körper in German). |
| 727 |
% We obtain these symbols with the following macros: |
| 728 |
% \begin{center} |
| 729 |
% |\R|, |\C|, |\Z|, |\N|, |\Q|, |\F|, |\K|. |
| 730 |
% \end{center} |
| 731 |
% |
| 732 |
% \smallskip |
| 733 |
% \DescribeMacro{\mathset} |
| 734 |
% The |\mathset| command enables you to change the behavior |
| 735 |
% of all these macros in a global way. |
| 736 |
% By default, |\mathset| is an alias for |\mathbf|, but if you prefer double-struck letters, |
| 737 |
% you can simply use |\renewcommand\mathset{\mathbb}| (with local effect within |
| 738 |
% an environment or a pair of curly braces). |
| 739 |
% |
| 740 |
% \smallskip |
| 741 |
% \DescribeMacro{\onlymathC} |
| 742 |
% The macro |\onlymathC| is designed for cases when |\C| is already defined, |
| 743 |
% but only in text mode (usually with the Russian language). Then you get the message: |
| 744 |
% ``\texttt{Command \string\C\space invalid in math mode}''. |
| 745 |
% This macro preserves the original definition for text mode |
| 746 |
% and allows you to use |\C| for the complex number set in math mode. |
| 747 |
% Simply call |\onlymathC| once in the preamble or anywhere in the document. |
| 748 |
% |
| 749 |
% \medskip |
| 750 |
% \DescribeMacro{\ds} |
| 751 |
% The |\displaystyle| command is very common, so the |\ds| alias is provided. |
| 752 |
% Not only it eases typing but also it makes source code more readable. |
| 753 |
% |
| 754 |
% \medskip |
| 755 |
% Symbols with limits behave differently for in-line formulas or for displayed equations. |
| 756 |
% In the latter case, `limits' are placed under or above the symbol |
| 757 |
% whereas for in-line math mode, |
| 758 |
% they are placed on the right, as a subscript or exponent. Compare: |
| 759 |
% $\zeta(s)=\sum_{n=1}^{\infty }\frac{1}{n^s}$ with |
| 760 |
% \[\zeta(s)=\sum_{n=1}^{\infty}\frac{1}{n^s}.\] |
| 761 |
% |
| 762 |
% \DescribeMacro{\dlim} \DescribeMacro{\dsum} \DescribeMacro{\dprod} |
| 763 |
% \DescribeMacro{\dcup} \DescribeMacro{\dcap} |
| 764 |
% With in-line math mode, displaymath can be forced with |\displaystyle| |
| 765 |
% or its alias |\ds|. However, when using these commands, all the rest of the current |
| 766 |
% mathematical environment will be set in displaymath mode |
| 767 |
% (as shown in the previous example, where the fraction is expanded). |
| 768 |
% To limit the display style effect to the affected symbol only, |
| 769 |
% similar to the \textsf{amsmath} command |\dfrac|, |
| 770 |
% we can use the following macros: |
| 771 |
% |\dlim|, |\dsum|, |\dprod|, |\dcup|, |\dcap|. |
| 772 |
% So |
| 773 |
% \begin{center} |
| 774 |
% |$\dlim_{x\to +\infty}\frac{1}{x}$| \quad yields \quad $\dlim_{x \to +\infty}\frac{1}{x}$. |
| 775 |
% \end{center} |
| 776 |
% |
| 777 |
% \DescribeMacro{\lbar} \DescribeMacro{\hlbar} |
| 778 |
% Large bars over expressions are obtained with |\overline| |
| 779 |
% or its alias |\lbar|, to get for instance $\lbar{z_1z_2}$. |
| 780 |
% Similar to vectors, you can raise the bar (from the height of `$A$') with |
| 781 |
% the |\hlbar| command, to correct uneven bars heights. |
| 782 |
% \begin{center} |
| 783 |
% $\lbar{z+z'}=\hlbar{z}+\lbar{z'}$, obtained with |\hlbar{z}|, |
| 784 |
% looks better than $\lbar{z+z'}=\lbar{z}+\lbar{z'}$. |
| 785 |
% \end{center} |
| 786 |
% |
| 787 |
% \DescribeMacro{\eqdef} \DescribeMacro{\eqdef*} |
| 788 |
% The |\eqdef| macro writes the equality symbol topped with `def', |
| 789 |
% or with `$\scriptstyle \Delta$' for |\eqdef*| |
| 790 |
% (thanks to the \LaTeX\ command |\stackrel|):\\[2ex] |
| 791 |
% \begin{minipage}{7cm} |
| 792 |
% \begin{verbatim} |
| 793 |
%\[ \e^{\i\theta} \eqdef |
| 794 |
% \cos\theta + \i\sin\theta \] |
| 795 |
% \end{verbatim} |
| 796 |
% \end{minipage} |
| 797 |
% \begin{minipage}{5cm}\vspace{-3ex} |
| 798 |
% \[\e^{\i\theta}\eqdef\cos\theta + \i\sin\theta\] |
| 799 |
% \end{minipage} |
| 800 |
% |
| 801 |
% \noindent\begin{minipage}{7cm} |
| 802 |
% \begin{verbatim} |
| 803 |
%\[ \e^{\i\theta} \eqdef* |
| 804 |
% \cos\theta + \i\sin\theta \] |
| 805 |
% \end{verbatim} |
| 806 |
% \end{minipage} |
| 807 |
% \begin{minipage}{5cm}\vspace{-3ex} |
| 808 |
% \[\e^{\i\theta}\eqdef*\cos\theta + \i\sin\theta\] |
| 809 |
% \end{minipage} |
| 810 |
% |
| 811 |
% \DescribeMacro{\unbr} |
| 812 |
% |\unbr| is an alias for |\underbrace| |
| 813 |
% \footnote{The \textsf{mathtools} package by Morten Høgholm |
| 814 |
% and Lars Madsen~\cite{TOOL} provides a new and improved version |
| 815 |
% of the \texttt{\string \underbrace} command, along with many other useful macros. |
| 816 |
% It is loaded by \textsf{mismath}.}, |
| 817 |
% making source code more compact.\\[2ex] |
| 818 |
% \begin{minipage}{6.4cm} |
| 819 |
% \begin{verbatim} |
| 820 |
%\[ (QAP)^n = \unbr{QAP\mul QAP\mul |
| 821 |
% \cdots\mul QAP}_{n\text{ times}} \] |
| 822 |
% \end{verbatim} |
| 823 |
% \end{minipage} |
| 824 |
% \begin{minipage}{6cm}\vspace{-3ex} |
| 825 |
% \[ (QAP)^n = \unbr{QAP\mul QAP\mul\cdots\mul QAP}_{n\text{ times}} \] |
| 826 |
% \end{minipage} |
| 827 |
% |
| 828 |
% \DescribeMacro{\iif} |
| 829 |
% |\iif| is an alias for ``\iif'', to be used in text mode. |
| 830 |
% |
| 831 |
% \medskip |
| 832 |
% \DescribeMacro{\then} |
| 833 |
% This macro produces the symbol $\Longrightarrow$ surrounded by large spaces, |
| 834 |
% like the standard macro |\iff| does it with $\Longleftrightarrow$. |
| 835 |
% It's just an alias for the \textsf{amsmath} |\implies| macro. |
| 836 |
% |
| 837 |
% \subsection{Improved spacing in mathematical formulas} |
| 838 |
% |
| 839 |
% \DescribeMacro{\txt} |
| 840 |
% The |\txt| macro, based on |\text| from the \textsf{amstext} package |
| 841 |
% (loaded by \textsf{amsmath}), |
| 842 |
% leaves em quad spaces (|\quad|) around the text. See the following example: |
| 843 |
% \begin{center} |
| 844 |
% |\[ \ln x=a \then x=\e^a, \txt{rather than}| \\ |
| 845 |
% | \ln x=a \Longrightarrow x=\e^a \]| \\[1ex] |
| 846 |
% $ \ln x=a \then x=\e^a, \txt{rather than} \ln x=a \Longrightarrow x=\e^a$ |
| 847 |
% \end{center} |
| 848 |
% |
| 849 |
% \DescribeMacro{\mul} |
| 850 |
% The multiplication symbol obtained with |\times| produces the same spacing as addition |
| 851 |
% or subtraction operators, whereas division obtained with $/$ is closer to its operands. |
| 852 |
% This actually hides the priority of multiplication over $+$ and $-$. |
| 853 |
% That's why we provide the |\mul| macro, to avoid the large space surrounding |\times|: |
| 854 |
% \begin{center} |
| 855 |
% $\lambda+\alpha \mul b-\beta \mul c$, obtained with |\mul|, |
| 856 |
% looks better than $\lambda+\alpha \times b-\beta \times c$. |
| 857 |
% \end{center} |
| 858 |
% |
| 859 |
% Using |\mul| before a function name works also fine (since v3.1) without the need |
| 860 |
% of curly braces to avoid the additional space before the operator name: |
| 861 |
% |$x\mul\sin x$| yields $x\mul{\sin x}$. |
| 862 |
% |
| 863 |
% \medskip |
| 864 |
% When using a |\left| \ldots |\right| structure, |
| 865 |
% \TeX\ sets additional surrounding space in some situations. |
| 866 |
% The \textsf{mleftright}~\cite{MLR} package, loaded by \textsf{mismath}, |
| 867 |
% offers the variants |\mleft| and |\mright| |
| 868 |
% to address these spacing issues of inner formulas. |
| 869 |
% It also provides the |\mleftright| macro that redefines |\left| as |\mleft| |
| 870 |
% and |\right| as |\mright|. |
| 871 |
% |
| 872 |
% \begin{center} |
| 873 |
% Compare $\sin\left(\frac{\pi}{3}\right)\mul 2$ with |
| 874 |
% $\sin\mleft(\frac{\pi}{3}\mright)\mul 2$ obtained with |
| 875 |
% |$\sin\mleft(\frac{\pi}{3}\mright)}\mul 2$|. |
| 876 |
% \end{center} |
| 877 |
% |
| 878 |
% \DescribeMacro{\pow} |
| 879 |
% In the same way, when typesetting an exponent after a closing \emph{big} |
| 880 |
% parenthesis produced by |\right)|, |
| 881 |
% the exponent appears to be a little to far from the parenthesis. |
| 882 |
% To address this issue, the |\pow|\marg{expr}\marg{pow} command is provided |
| 883 |
% \footnote{This macro gives bad results with \emph{normal-sized} parenthesis.}, |
| 884 |
% which places \meta{expr} in a pair of parenthesis and |
| 885 |
% sets the positioning of the exponent \meta{pow} |
| 886 |
% slightly closer to the right parenthesis. |
| 887 |
% Compare: |
| 888 |
% \[ \e^a =\lim_{n \to +\infty}\pow{1+\frac{a}{n}}{n} |
| 889 |
% \txt{obtained with \texttt{\string \pow}, rather than} |
| 890 |
% \e^a =\lim_{n \to +\infty}\left(1+\frac{a}{n}\right)^{n}.\] |
| 891 |
% |
| 892 |
% \DescribeMacro{\abs} \DeleteShortVerb{\|} |
| 893 |
% The \cs{abs} command typesets the absolute value while properly managing the spacing, |
| 894 |
% which \texttt{|}\ldots\texttt{|} does not. Compare $\abs{-x}$, |
| 895 |
% obtained with \cs{abs}, to $|-x|$ without. |
| 896 |
% Using the delimiters \cs{lvert} and \cs{rvert} presents another issue when |
| 897 |
% the absolute value follows a function name; \eg \verb@\ln\lvert x\rvert@ yields |
| 898 |
% $\ln \lvert x\rvert$ |
| 899 |
% instead of $\ln\abs{x}$ (with \verb@\ln\abs{x}@). |
| 900 |
% Moreover, with \cs{abs}, the size of the delimiters adapts to the content |
| 901 |
% \footnote{We could also define \texttt{\string \abs} |
| 902 |
% using \texttt{\string \DeclarePairedDelimiter} |
| 903 |
% from the \mbox{\textsf{mathtools}} package~\cite{TOOL}.}. |
| 904 |
% \MakeShortVerb{\|} |
| 905 |
% |
| 906 |
% \medskip |
| 907 |
% \DescribeMacro{\lfrac} |
| 908 |
% The |\lfrac| macro behaves like |\frac| |
| 909 |
% but with additional spacing around the arguments, |
| 910 |
% making the corresponding fraction bar slightly longer. |
| 911 |
% This macro has an optional parameter |\lfrac|\oarg{space}\marg{num}\marg{denom} |
| 912 |
% to adjust the length of the fraction bar. The optional \meta{space} argument must be given |
| 913 |
% with \emph{math units} (\texttt{mu}); |
| 914 |
% the default value is \texttt{7mu} (equivalent to |\:\,|). |
| 915 |
% See the following examples; |
| 916 |
% the last one is obtained with |\lfrac[4mu]{1}{\sqrt{x}}|. |
| 917 |
% \[ \lbar{Z} = \lfrac{\lbar{z_1-z_2}}{\lbar{z_1+z_2}} \qquad |
| 918 |
% u(x)= \lfrac{\frac{1-2x}{5}}{x^2+1} \qquad |
| 919 |
% y'+xy=\lfrac[4mu]{1}{\sqrt{x}} |
| 920 |
% \] |
| 921 |
% \pagebreak ^^A to get footnotes at the right page |
| 922 |
% \hypertarget{ibrackets}{} |
| 923 |
% |
| 924 |
% \DescribeMacro{[ibrackets]} |
| 925 |
% Open intervals are commonly represented with parenthesis, \eg $(0, +\infty)$, |
| 926 |
% but sometimes square brackets are used, especially in French mathematics: $]0, +\infty[$. |
| 927 |
% In that case, the space around the square brackets is generally inappropriate, |
| 928 |
% as in the expression $x \in \mathclose{]} 0, +\infty[$. |
| 929 |
% To address this issue, we have redefined the brackets in the \mbox{\textsf{ibrackets}} |
| 930 |
% package~\cite{BRACKET}. |
| 931 |
% This one can be optionally |
| 932 |
% loaded by \textsf{mismath} using the \texttt{ibrackets} package option. |
| 933 |
% Thus |$x\in ]-\pi,0[ \cup ]2\pi,3\pi[$| |
| 934 |
% \begin{align*} |
| 935 |
% \mbox{yields \ } |
| 936 |
% x\in ]-\pi, 0[ \cup ]2\pi, 3\pi[ & \mbox{\ with \textsf{ibrackets}}, \\ |
| 937 |
% \mbox{instead of \ } |
| 938 |
% x\in \mathclose{]}-\pi, 0 \mathopen{[} \cup |
| 939 |
% \mathclose{]} 2\pi, 3\pi \mathopen{[} |
| 940 |
% &\mbox{\ without \textsf{ibrackets}}. |
| 941 |
% \end{align*} |
| 942 |
% |
| 943 |
% In our code, the symbols $[$ and $]$ are set as `active' characters, |
| 944 |
% behaving like ordinary characters and not as delimiters in most cases. |
| 945 |
% Therefore, a line break could occur between the two brackets, but |
| 946 |
% it is always possible to transform them |
| 947 |
% into delimiters using |\left| and |\right|. |
| 948 |
% |
| 949 |
% However, when a bracket is \emph{immediately} followed by a + or - character, |
| 950 |
% it becomes an open delimiter. |
| 951 |
% Therefore, when the left bound contains an operator sign, |
| 952 |
% \emph{you don't have to leave a space between the first bracket and the sign}, |
| 953 |
% otherwise, the spaces surrounding the operator will be too large. |
| 954 |
% For example if you write |$x \in ] -\infty, 0]$|, it yields $x \in ] -\infty, 0]$ |
| 955 |
% instead of $x \in ]-\infty, 0]$. |
| 956 |
% Conversely, when dealing with algebraic expressions involving intervals, |
| 957 |
% \emph{you must leave a blank space between the second bracket and the} +/- |
| 958 |
% \emph{operation}. |
| 959 |
% For instance |$[a,b] +[c,d]$| yields $[a,b] +[c,d]$ |
| 960 |
% but |$[a,b]+ [c,d]$| yields $[a, b]+ [c, d]$. |
| 961 |
% |
| 962 |
% \medskip |
| 963 |
% Note that there are other ways to proceed, |
| 964 |
% for example with |\interval|, |
| 965 |
% from the \textsf{interval} package~\cite{INT}, |
| 966 |
% or with |\DeclarePairedDelimiter| |
| 967 |
% \footnote{You cannot use \texttt{\string\DeclarePairedDelimiter} with square brackets |
| 968 |
% when \textsf{ibrackets} is loaded.} |
| 969 |
% from \mbox{\textsf{mathtools}}~\cite{TOOL}. |
| 970 |
% \hypertarget{decimalcomma}{} |
| 971 |
% |
| 972 |
% \medskip |
| 973 |
%\DescribeMacro{[decimalcomma]} |
| 974 |
% In many countries, except notably in English-speaking countries, |
| 975 |
% the comma is used as a decimal separator for numbers. |
| 976 |
% However, in the math mode of \LaTeX, the comma is always, by default, |
| 977 |
% treated as a punctuation symbol and therefore is followed by a space. |
| 978 |
% This is appropriate in intervals: |$[a,b]$| results in $[a,b]$, |
| 979 |
% but not for numbers where the comma represents the decimal separator. |
| 980 |
% For example, |$12,5$| is displayed as $12, 5$ instead of $12{,}5$. |
| 981 |
% |
| 982 |
% Two very convenient packages allow handling the decimal comma in math mode: |
| 983 |
% \textsf{icomma} by Walter Schmidt~\cite{ICOMMA} and |
| 984 |
% \textsf{ncccomma} by Alexander I.~Rozhenko~\cite{NCC}. |
| 985 |
% The second package takes a more generic approach, |
| 986 |
% however it poses several compatibility issues, |
| 987 |
% in particular when running through Lua\LaTeX, using \textsf{unicode-math} |
| 988 |
% and calling |\setmathfont|. |
| 989 |
% Therefore we propose the \textsf{decimalcomma} package~\cite{DEC}, |
| 990 |
% functionally identical to that of \textsf{ncccomma} but |
| 991 |
% without the aforementioned incompatibility. |
| 992 |
% It can be loaded by \textsf{mismath} using the \texttt{decimalcomma} |
| 993 |
% package option. |
| 994 |
% |
| 995 |
% \subsection{Environments for systems of equations and small matrices} |
| 996 |
% |
| 997 |
% \DescribeEnv{system} |
| 998 |
% The \texttt{system} environment, defined in the \textsf{mismath} package, |
| 999 |
% is used to represent a system of equations:\\[2ex] |
| 1000 |
% \begin{minipage}{6.5cm} |
| 1001 |
% \begin{verbatim} |
| 1002 |
%\[ \begin{system} |
| 1003 |
% x=1+2t \\ y=2-t \\ z=-3-t |
| 1004 |
% \end{system} \] |
| 1005 |
% \end{verbatim} |
| 1006 |
% \end{minipage} |
| 1007 |
% \begin{minipage}{5cm} \vspace{-3ex} |
| 1008 |
% \[ \begin{system} x=1+2t \\ y=2-t \\z=-3-t \end{system} \] |
| 1009 |
% \end{minipage} |
| 1010 |
% |
| 1011 |
% \medskip |
| 1012 |
% \DescribeMacro{\systemsep} |
| 1013 |
% This first example could also have been achieved using the \texttt{cases} environment |
| 1014 |
% from the \textsf{amsmath} package, although \texttt{cases} places mathematical expressions |
| 1015 |
% closer to the curly brace. |
| 1016 |
% The |\systemsep| length allows to adjust the gap between |
| 1017 |
% the bracket and the math expressions. |
| 1018 |
% By default, the gap is set to |\medspace|. You can reduce this gap by redefining |
| 1019 |
% the command, \eg |\renewcommand{\systemsep}{\thinspace}|. |
| 1020 |
% Alternatively you can increase the gap using |\thickspace|; |
| 1021 |
% the same spacing as of the \texttt{cases} environment |
| 1022 |
% being obtained with |\renewcommand{\systemsep}{}|. |
| 1023 |
% So the |\systemsep| command allows for greater flexibility in adjusting the spacing |
| 1024 |
% within the \texttt{system} environment. |
| 1025 |
% |
| 1026 |
% \medskip |
| 1027 |
% \DescribeEnv{system\oarg{coldef}} |
| 1028 |
% By default, a system is written like an \texttt{array} environment with only one column, |
| 1029 |
% left aligned. However the \texttt{system} environment has an optional |
| 1030 |
% argument that allows to create systems with multiple columns, |
| 1031 |
% specifying their alignment using the same syntax as the \texttt{array} environment in |
| 1032 |
% \LaTeX. For instance, using |\begin{system}[cl]| will produce a two-column system, |
| 1033 |
% with the first column centered and |
| 1034 |
% the second column left-aligned, as shown in the following example:\\[2ex] |
| 1035 |
% \begin{minipage}{7cm} |
| 1036 |
% \begin{verbatim} |
| 1037 |
%\[ \begin{system}[cl] |
| 1038 |
% y & =\dfrac{1}{2}x-2 \\[1ex] |
| 1039 |
% (x,y) & \neq (0,-2) |
| 1040 |
% \end{system} \] |
| 1041 |
% \end{verbatim} |
| 1042 |
% \end{minipage} |
| 1043 |
% \begin{minipage}{5cm}\vspace{-2ex} |
| 1044 |
% \[ \begin{system}[cl] y&=\dfrac{1}{2}x-2 \\[1ex] (x,y)&\neq (0,-2) \end{system}\] |
| 1045 |
% \end{minipage} |
| 1046 |
% |
| 1047 |
% \DescribeMacro{\systemstretch} |
| 1048 |
% The default spacing between the lines of a \texttt{system} environment has been slightly |
| 1049 |
% enlarged compared to the one used in \texttt{array} environments (using a factor of 1.2). |
| 1050 |
% This can be adjusted by using |
| 1051 |
% |\renewcommand{\systemstretch}|\marg{stretch}, where \meta{stretch} is the desired factor |
| 1052 |
% for the spacing. You can place this command |
| 1053 |
% inside the current mathematical environment for a local change, or outside |
| 1054 |
% for a global change. The default value for is 1.2. |
| 1055 |
% Furthermore you can also use the end of the line with a spacing option, as |
| 1056 |
% demonstrated above with |\\[1ex]|, to control the spacing between specific lines in |
| 1057 |
% the system. |
| 1058 |
% |
| 1059 |
% Another example with |\begin{system}[rl@{\quad}l]| |
| 1060 |
% \footnote{\texttt{@\{\ldots\}} sets inter-column space.}: |
| 1061 |
% \begin{equation*} |
| 1062 |
% \begin{system}[rl@{\quad}l] |
| 1063 |
% x+3y+5z&=0 & R_1\\ 2x+2y-z&=3 & R_2\\ 3x-y+z&=2 & R_3 |
| 1064 |
% \end{system} |
| 1065 |
% \iff |
| 1066 |
% \begin{system}[rl@{\quad}l] |
| 1067 |
% x+3y+5z&=0 & R_1\\ |
| 1068 |
% 4y+11z&=3 & R_2 \gets 2R_1-R_2 \\ |
| 1069 |
% 5y+7z&=-1 & R_3 \gets \frac{1}{2}\left(3R_1-R_3\right) |
| 1070 |
% \end{system} |
| 1071 |
% \end{equation*} |
| 1072 |
% |
| 1073 |
% Let's also mention the \textsf{systeme} package~\cite{SYST} which provides |
| 1074 |
% a lighter syntax and automatic alignments for linear systems. |
| 1075 |
% Additionally, there is the \textsf{spalign} package~\cite{SPAL}, |
| 1076 |
% which offers a convenient and easy syntax for systems and matrices with |
| 1077 |
% visually appealing alignments. |
| 1078 |
% |
| 1079 |
% \medskip |
| 1080 |
% \DescribeEnv{spmatrix} |
| 1081 |
% The \textsf{amsmath} package offers several environments to typeset matrices : |
| 1082 |
% For example, the \texttt{pmatrix} environment surrounds the matrix with parenthesis, |
| 1083 |
% and the \texttt{smallmatrix} environment creates a smaller matrix suitable for insertion |
| 1084 |
% within a text line. We provide a combination of the these both |
| 1085 |
% functionalities with the \texttt{spmatrix} environment: |
| 1086 |
% |$\vec{u}\begin{spmatrix}-1\\2\end{spmatrix}$| yielding |
| 1087 |
% $\vec{u}\begin{spmatrix}-1\\2\end{spmatrix}$. |
| 1088 |
% |
| 1089 |
% The \textsf{mathtools} package enhances the \textsf{amsmath} matrix environments |
| 1090 |
% and also provides a small matrix environment with parenthesis: \texttt{psmallmatrix}. |
| 1091 |
% Moreover, with the starred version |\begin{psmallmatrix*}|\oarg{col}, |
| 1092 |
% you can choose the alignment inside the columns (\texttt{c}, \texttt{l} or \texttt{r}). |
| 1093 |
% However, the space before the left parenthesis is unfortunately too narrow |
| 1094 |
% compared to the space inside the parenthesis. |
| 1095 |
% To illustrate this, consider the following comparison: |
| 1096 |
% $\vec{u}\begin{spmatrix}-1\\2\end{spmatrix}$ (using \textsf{mismath}'s \texttt{spmatrix}) |
| 1097 |
% vs.\@ $\vec{u}\begin{psmallmatrix}-1\\2\end{psmallmatrix}$ |
| 1098 |
% (using \textsf{mathtools} \texttt{psmallmatrix}). |
| 1099 |
% |
| 1100 |
% \medskip |
| 1101 |
% For typesetting various kinds of matrices, let's mention the excellent |
| 1102 |
% \textsf{nicematrix} package by François Pantigny~\cite{NMATX}. |
| 1103 |
% |
| 1104 |
% \subsection{Displaymath in double columns} |
| 1105 |
% |
| 1106 |
% \DescribeEnv{mathcols} |
| 1107 |
% The \texttt{mathcols} environment allows you to arrange |
| 1108 |
% lengthy calculations with short expressions across two columns |
| 1109 |
% separated by a vertical line, |
| 1110 |
% as shown in the following example. |
| 1111 |
% However, to use this feature, the \textsf{multicol} package must be loaded in the preamble. |
| 1112 |
% The \texttt{mathcols} environment activates mathematical mode |
| 1113 |
% in display style and uses the \texttt{aligned} environment (from \textsf{amsmath}). |
| 1114 |
% \begin{mathcols} |
| 1115 |
% & \frac{1}{2 \mul {\pow{\frac{1}{4}}{n}} + 1} \geq 0.999 \\ |
| 1116 |
% \iff\ & 1 \geq 1.998 \pow{\frac{1}{4}}{n} + 0.999 \\ |
| 1117 |
% \iff\ & 0.001 \geq \frac{1.998}{4^n} \\ |
| 1118 |
% \changecol |
| 1119 |
% & \iff 4^n \geq 1998 \\ |
| 1120 |
% & \iff n \ln 4 \geq \ln(1998) \\ |
| 1121 |
% & \iff n \geq \frac{\ln(1998)}{\ln 4} \approx 5.4 \\ |
| 1122 |
% & \iff n \geq 6 |
| 1123 |
% \end{mathcols} |
| 1124 |
% |
| 1125 |
% \DescribeMacro{\changecol} |
| 1126 |
% The |\changecol| macro is used to switch to the next column, |
| 1127 |
% and alignments within the columns is done using the classic delimiters |
| 1128 |
% |&|, to separate entries, and |\\|, to start a new row. |
| 1129 |
% |
| 1130 |
% \begin{verbatim} |
| 1131 |
%\begin{mathcols} |
| 1132 |
% & \frac{1}{2 \mul {\pow{\frac{1}{4}}{n}} + 1} \geq 0.999 \\ |
| 1133 |
% \iff\ & 1 \geq 1.998 \pow{\frac{1}{4}}{n} + 0.999 \\ |
| 1134 |
% \iff\ & 0.001 \geq \frac{1.998}{4^n} \\ |
| 1135 |
%\changecol |
| 1136 |
% & \iff 4^n \geq 1998 \\ |
| 1137 |
% & \iff n \ln 4 \geq \ln(1998) \\ |
| 1138 |
% & \iff n \geq \frac{\ln(1998)}{\ln 4} \approx 5.4 \\ |
| 1139 |
% & \iff n \geq 6 |
| 1140 |
%\end{mathcols} |
| 1141 |
% \end{verbatim} |
| 1142 |
% |
| 1143 |
% \vspace{-4ex} |
| 1144 |
% \subsection{Summary of the package options} |
| 1145 |
% |
| 1146 |
% The following table summarizes the possible package options. |
| 1147 |
% You can add to them any option you want to pass to \textsf{amsmath} or \textsf{mathtools}. |
| 1148 |
% The hyperlinks (in blue) redirect to the paragraphs in the documentation |
| 1149 |
% where these options are described. |
| 1150 |
% \begin{center} |
| 1151 |
% \setlength{\extrarowheight}{1pt} |
| 1152 |
% \begin{tabular}{>{\ttfamily}ll} |
| 1153 |
% \hline |
| 1154 |
% \normalfont Option & \mbox{Effect} \\ |
| 1155 |
% \hline |
| 1156 |
% \hyperlink{nofunction}{nofunction} & don't load some additional function definitions \\ |
| 1157 |
% \hyperlink{classicReIm}{otherReIm} & typesets |\Re| and |\Im| as $\Re$ and $\Im$ \\ |
| 1158 |
% \hyperlink{classicReIm}{classicReIm} & preserves |\Re| and |\Im| as $\oldRe$ and $\oldIm$ \\ |
| 1159 |
% \hyperlink{ibrackets}{ibrackets} & loads the \textsf{ibrackets} package\\ |
| 1160 |
% \hyperlink{decimalcomma}{decimalcomma} & loads the \textsf{decimalcomma} package \\ |
| 1161 |
% \hline |
| 1162 |
% \end{tabular} |
| 1163 |
% \end{center} |
| 1164 |
% \StopEventually{} |
| 1165 |
% |
| 1166 |
% \section{Implementation} |
| 1167 |
% |
| 1168 |
% We load certain packages conditionally to avoid `option clash' errors in cases |
| 1169 |
% where these packages have been previously loaded with other options. |
| 1170 |
% The \textsf{amsmath} package is loaded by \textsf{mathtools}. |
| 1171 |
% The \textsf{xparse} package provides |\NewDocumentCommand|, |
| 1172 |
% redefined in \LaTeX3 kernel. So this package is obsolete |
| 1173 |
% with the October 2020 \LaTeX\ release. |
| 1174 |
% \begin{macrocode} |
| 1175 |
\newif\ifmm@ibrackets % initialized to false |
| 1176 |
\DeclareOption{ibrackets}{\mm@ibracketstrue} |
| 1177 |
\newif\ifmm@decimalcomma |
| 1178 |
\DeclareOption{decimalcomma}{\mm@decimalcommatrue} |
| 1179 |
\newif\ifmm@nofunction |
| 1180 |
\DeclareOption{nofunction}{\mm@nofunctiontrue} |
| 1181 |
\newif\ifmm@otherReIm |
| 1182 |
\DeclareOption{otherReIm}{\mm@otherReImtrue} |
| 1183 |
\newif\ifmm@classicReIm |
| 1184 |
\DeclareOption{classicReIm}{\mm@classicReImtrue} |
| 1185 |
\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{mathtools}} |
| 1186 |
\ProcessOptions \relax |
| 1187 |
|
| 1188 |
%\@ifpackageloaded{amsmath}{}{\RequirePackage{amsmath}} |
| 1189 |
\@ifpackageloaded{mathtools}{}{\RequirePackage{mathtools}} |
| 1190 |
\@ifpackageloaded{esvect}{}{\RequirePackage[b]{esvect}} |
| 1191 |
\RequirePackage{mleftright} |
| 1192 |
\RequirePackage{ifthen} |
| 1193 |
\providecommand\IfFormatAtLeastTF{\@ifl@t@r\fmtversion} |
| 1194 |
\IfFormatAtLeastTF{2020-10-01}{}{\RequirePackage{xparse}} |
| 1195 |
% xparse provides \NewDocumentCommand, now in LaTeX3 |
| 1196 |
\RequirePackage{xspace} % for \iif command |
| 1197 |
\RequirePackage{iftex} |
| 1198 |
\RequirePackage{etoolbox} % provides \AtEndPreamble |
| 1199 |
\RequirePackage{xkeyval} % for \pinumber options |
| 1200 |
|
| 1201 |
% \end{macrocode} |
| 1202 |
% |
| 1203 |
% The package \textsf{unicode-math} causes some compatibility issues |
| 1204 |
% with \textsf{ibrackets} and \textsf{decimalcomma}: theses packages |
| 1205 |
% must be loaded \emph{after} \textsf{unicode-math}, |
| 1206 |
% but \textsf{mismath} (like \textsf{amsmath}) should be loaded \emph{before} |
| 1207 |
% \textsf{unicode-math}. |
| 1208 |
% And to complicate matters, \mbox{\textsf{unicode-math}} defines all its commands |
| 1209 |
% by |\AtBeginDocument|. |
| 1210 |
% Therefore we used the command |\AtEndPreamble|, from the \textsf{etoolbox} package, |
| 1211 |
% which makes the job (because both \textsf{ibrackets} and \textsf{decimalcomma} |
| 1212 |
% work also in |\AtBeginDocument|). |
| 1213 |
% |
| 1214 |
% Moreover the command |\mathbfsfit| (used for tensors) is already defined |
| 1215 |
% in \textsf{unicode-math} and will not be redefined if \textsf{unicode-math} |
| 1216 |
% is loaded. |
| 1217 |
% \begin{macrocode} |
| 1218 |
\@ifpackageloaded{unicode-math}{ |
| 1219 |
\PackageWarningNoLine{mismath}{The package unicode-math\MessageBreak |
| 1220 |
should be loaded after mismath} |
| 1221 |
}{} |
| 1222 |
\newif\ifmm@unicodemath |
| 1223 |
\newif\ifmm@multicol |
| 1224 |
\AtEndPreamble{% necessary to work with unicode-math |
| 1225 |
\ifmm@decimalcomma\RequirePackage{decimalcomma}\fi |
| 1226 |
\ifmm@ibrackets\RequirePackage{ibrackets}\fi |
| 1227 |
\@ifpackageloaded{multicol}{\mm@multicoltrue}{} |
| 1228 |
\@ifpackageloaded{unicode-math}{\mm@unicodemathtrue}{ |
| 1229 |
\DeclareMathAlphabet{\mathbfsfit}{\encodingdefault}% |
| 1230 |
{\sfdefault}{bx}{it}} |
| 1231 |
} |
| 1232 |
|
| 1233 |
% \end{macrocode} |
| 1234 |
% |
| 1235 |
% \medskip |
| 1236 |
% \DescribeMacro{\bslash} |
| 1237 |
% The |\bslash| macro originates from Frank Mittelbach's \textsf{doc.sty} package. |
| 1238 |
% It can be employed in other documents as an alternative to |\textbackslash|, |
| 1239 |
% especially in situations where |\textbackslash| does not work correctly, such as |
| 1240 |
% inside warning messages. |
| 1241 |
% \begin{macrocode} |
| 1242 |
{\catcode`\|=\z@ \catcode`\\=12 |gdef|bslash{\}} % \bslash command |
| 1243 |
|
| 1244 |
% \end{macrocode} |
| 1245 |
% |
| 1246 |
% \DescribeMacro{\mm@warning} \DescribeMacro{\mm@macro} \DescribeMacro{\mm@operator} |
| 1247 |
% The next three internal macros serve as meta commands for |
| 1248 |
% conditionally defining macros while providing a warning message if the macro already exists. |
| 1249 |
% |
| 1250 |
% \medskip |
| 1251 |
% \begin{macrocode} |
| 1252 |
\newcommand\mm@warning[1]{ |
| 1253 |
\PackageWarningNoLine{mismath}{Command \bslash #1 already exist |
| 1254 |
\MessageBreak and will not be redefined} |
| 1255 |
} |
| 1256 |
\newcommand\mm@macro[2]{ |
| 1257 |
\@ifundefined{#1}{ |
| 1258 |
\expandafter\def\csname #1\endcsname{#2} |
| 1259 |
}{\mm@warning{#1}} |
| 1260 |
} |
| 1261 |
\NewDocumentCommand\mm@operator{O{#3}mm}{% |
| 1262 |
\@ifundefined{#1}{ |
| 1263 |
\DeclareMathOperator{#2}{#3} |
| 1264 |
}{\mm@warning{#1}} |
| 1265 |
} |
| 1266 |
|
| 1267 |
% \end{macrocode} |
| 1268 |
% |
| 1269 |
% To produce the correct upright shape font when working |
| 1270 |
% with the \textsf{beamer} package, you don't have to use |\mathrm| |
| 1271 |
% but rather |\mathup| (based on |\operatorfont| from the \textsf{amsopn} package). |
| 1272 |
% This command also works fine with other sans serif fonts like \textsf{cmbright}. |
| 1273 |
% |
| 1274 |
% Moreover for \textsf{beamer}, which changes the default font family (to sans serif), |
| 1275 |
% |\e|, |\i|, |\j| have no effect without |\AtBeginDocument| and |
| 1276 |
% |\AtBeginDocument| is also necessary to redefine |\i| when calling |
| 1277 |
% the \textsf{hyperref} package which overwrites the |\i| definition. |
| 1278 |
% \medskip |
| 1279 |
% \begin{macrocode} |
| 1280 |
\@ifundefined{mathup}{ |
| 1281 |
\providecommand*{\mathup}[1]{{\operatorfont #1}} |
| 1282 |
}{\mm@warning{mathup} } % also in kpfonts and unicode-math |
| 1283 |
\mm@macro{e}{\mathup{e}} |
| 1284 |
\AtBeginDocument{\let\oldi\i \let\oldj\j |
| 1285 |
\renewcommand{\i}{\TextOrMath{\oldi}{\mathup{i}}} |
| 1286 |
\renewcommand{\j}{\TextOrMath{\oldj}{\mathup{j}}} } |
| 1287 |
|
| 1288 |
% \end{macrocode} |
| 1289 |
% |
| 1290 |
% \DescribeMacro{\MathFamily} |
| 1291 |
% The following macros |\MathUp| and |\MathIt| are toggles that transform |
| 1292 |
% any chosen letter in math mode to roman or italic style. |
| 1293 |
% These switches can be used anywhere in the document or the preamble. |
| 1294 |
% They are based on the generic macro |\MathFamily|. |
| 1295 |
% To obtain a letter in roman style instead of italic, we need to change the |
| 1296 |
% mathcode digit that represents the font family: 1 to 0. |
| 1297 |
% |
| 1298 |
% For example, except for \LuaLaTeX, mathcode of the `e' letter is: |
| 1299 |
% e="7165 (decimal 29029), with the second digit `1' indicating ``italic'' style. |
| 1300 |
% To get a roman `e', we need to change its mathcode to "7065. |
| 1301 |
% |
| 1302 |
% When used in the preamble, we call |\MathFamily| by |\AtBeginDocument| |
| 1303 |
% for working with the \textsf{beamer} package. |
| 1304 |
% Let's notice that |\MathFamily| has an erratic behavior when \textsf{unicode-math} |
| 1305 |
% is loaded, but fortunately, in that case, the |\DeclareMathSymbol| can be |
| 1306 |
% used instead, even outside the preamble. |
| 1307 |
% \medskip |
| 1308 |
% \begin{macrocode} |
| 1309 |
\newcount\mm@charcode |
| 1310 |
\newcount\mm@charclass |
| 1311 |
\newcount\mm@charfam |
| 1312 |
\newcount\mm@charslot |
| 1313 |
|
| 1314 |
\newcommand*\MathFamily[2]{% |
| 1315 |
\mm@charfam=#2 |
| 1316 |
\ifluatex |
| 1317 |
\mm@charclass=\Umathcharclass`#1 |
| 1318 |
%\mm@charfam=\Umathcharfam`#1 |
| 1319 |
\mm@charslot=\Umathcharslot`#1 |
| 1320 |
\Umathcode`#1= \mm@charclass \mm@charfam \mm@charslot |
| 1321 |
\else |
| 1322 |
\mm@charcode=\mathcode`#1 |
| 1323 |
% extract charclass |
| 1324 |
\@tempcnta=\mm@charcode |
| 1325 |
\divide\@tempcnta by "1000 |
| 1326 |
\multiply\@tempcnta by "1000 % charclass |
| 1327 |
\mm@charclass=\@tempcnta |
| 1328 |
% extract charslot |
| 1329 |
\@tempcnta=\mm@charcode |
| 1330 |
\@tempcntb=\mm@charcode |
| 1331 |
\divide\@tempcnta by "100 |
| 1332 |
\multiply\@tempcnta by "100 % charclass + charfam |
| 1333 |
\advance\@tempcntb by -\@tempcnta % charslot |
| 1334 |
\mm@charslot=\@tempcntb |
| 1335 |
% construct charcode |
| 1336 |
\mm@charcode=\mm@charclass |
| 1337 |
\multiply\mm@charfam by "100 |
| 1338 |
\advance\mm@charcode by \mm@charfam |
| 1339 |
\advance\mm@charcode by \mm@charslot |
| 1340 |
\mathcode`#1=\mm@charcode |
| 1341 |
\fi |
| 1342 |
} |
| 1343 |
|
| 1344 |
\newcommand*\MathUp[1]{% |
| 1345 |
\ifx\@onlypreamble\@notprerr % not in preamble |
| 1346 |
\ifmm@unicodemath |
| 1347 |
\DeclareMathSymbol{#1}{\mathalpha}{operators}{`#1} |
| 1348 |
\else |
| 1349 |
\MathFamily{#1}{0} |
| 1350 |
\fi |
| 1351 |
\else % in preamble |
| 1352 |
\AtBeginDocument{ |
| 1353 |
\ifmm@unicodemath |
| 1354 |
\DeclareMathSymbol{#1}{\mathalpha}{operators}{`#1} |
| 1355 |
\else |
| 1356 |
\MathFamily{#1}{0} |
| 1357 |
\fi |
| 1358 |
} |
| 1359 |
\fi |
| 1360 |
} |
| 1361 |
|
| 1362 |
\newcommand*\MathIt[1]{% |
| 1363 |
\ifx\@onlypreamble\@notprerr % not in preamble |
| 1364 |
\ifmm@unicodemath |
| 1365 |
\DeclareMathSymbol{#1}{\mathalpha}{letters}{`#1} |
| 1366 |
\else |
| 1367 |
\MathFamily{#1}{1} |
| 1368 |
\fi |
| 1369 |
\else % in preamble |
| 1370 |
\AtBeginDocument{ |
| 1371 |
\ifmm@unicodemath |
| 1372 |
\DeclareMathSymbol{#1}{\mathalpha}{letters}{`#1} |
| 1373 |
\else |
| 1374 |
\MathFamily{#1}{1} |
| 1375 |
\fi |
| 1376 |
} |
| 1377 |
\fi |
| 1378 |
} |
| 1379 |
|
| 1380 |
% \end{macrocode} |
| 1381 |
% With a similar approach we could also create additional macros to set any letter |
| 1382 |
% in bold or sans serif. However, there is no default family number associated |
| 1383 |
% with these typefaces. The family number depends on the font package being loaded and |
| 1384 |
% may vary depending on specific |\DeclareSymbolFont| used. |
| 1385 |
% Therefore, setting letters in bold or sans serif requires additional consideration |
| 1386 |
% and may not have a straightforward solution. |
| 1387 |
% |
| 1388 |
% \medskip |
| 1389 |
% In addition to |\MathUp| and |\MathIt|, we also offer the following command |
| 1390 |
% to set a group of letters, among `e, i, j', in roman typeface. |
| 1391 |
% \begin{macrocode} |
| 1392 |
\newcommand*\MathNumbers[1]{% |
| 1393 |
\in@{e}{#1} \ifin@ \MathUp{e} \fi |
| 1394 |
\in@{i}{#1} \ifin@ \MathUp{i} \fi |
| 1395 |
\in@{j}{#1} \ifin@ \MathUp{j} \fi |
| 1396 |
} |
| 1397 |
|
| 1398 |
% \end{macrocode} |
| 1399 |
% \DescribeMacro{\apply} |
| 1400 |
% With the inverse switch |\MathNormal|, you can apply the normal (italic) style |
| 1401 |
% on any comma-separated list of characters. This is achieved using |
| 1402 |
% the |\apply| macro, \eg |\apply\macro{arg1,arg2}| |
| 1403 |
% expands to |\macro{arg1}\macro{arg2}|. |
| 1404 |
% Thus |\apply\MathUp{e,i,j}| is equivalent to |\MathUp{e}\MathUp{i}\MathUp{j}|. |
| 1405 |
% I discovered this powerfull macro on \texttt{iterate190.rssing.com} by searching for |
| 1406 |
% ``TeX How to iterate over a comma separated list''. |
| 1407 |
% The answer was posted under the pseudonym `wipet' on 2021/02/26. |
| 1408 |
% Let its author, Petr Ol\v{s}ák, be thanked. |
| 1409 |
% This macro allows to accomplish tasks that |
| 1410 |
% usual loop instructions like |\@for| or |\foreach| cannot achieve due to |
| 1411 |
% errors like ``\texttt{!~Improper alphabetic constant}''. |
| 1412 |
% For instance, if you try |\def\letter{A} \MathUp{\letter}| it will fail |
| 1413 |
% because the control sequence |\letter| is not strictly |
| 1414 |
% equivalent here to the single character `A'. |
| 1415 |
% |
| 1416 |
% \medskip |
| 1417 |
% \begin{macrocode} |
| 1418 |
\def\apply#1#2{\apply@#1#2,\apply@,} |
| 1419 |
\def\apply@#1#2,{\ifx\apply@#2\empty |
| 1420 |
\else #1{#2}\afterfi@{\apply@#1}\fi} |
| 1421 |
\def\afterfi@#1#2\fi{\fi#1} |
| 1422 |
|
| 1423 |
\newcommand*\MathNormal[1]{% list argument |
| 1424 |
\apply\MathIt{#1} |
| 1425 |
} |
| 1426 |
|
| 1427 |
% \end{macrocode} |
| 1428 |
% |
| 1429 |
% The following commands were used originally (until version 2.2) |
| 1430 |
% to set the math letters e, i or j in upright shape, |
| 1431 |
% but only worked in the preamble. |
| 1432 |
% This is now managed by the more powerful |\MathUp| command, but |
| 1433 |
% the old commands are maintained as alias for |\MathUp|. |
| 1434 |
% \medskip |
| 1435 |
% |
| 1436 |
% \begin{macrocode} |
| 1437 |
\newcommand{\enumber}{\MathUp{e}} |
| 1438 |
\newcommand{\inumber}{\MathUp{i}} |
| 1439 |
\newcommand{\jnumber}{\MathUp{j}} |
| 1440 |
|
| 1441 |
% \end{macrocode} |
| 1442 |
% |
| 1443 |
% Obtaining an upright Greek letter $\pi$ must be handled differently. |
| 1444 |
% The toggles are called |\pinumber| and |\pinormal| |
| 1445 |
% and can be used anywhere in the document. |
| 1446 |
% |
| 1447 |
% But |\pinumber| must be called first in the preamble with an optional argument. |
| 1448 |
% This argument can be a valid command name that produces an upright pi letter |
| 1449 |
% (after having loading an appropriate package). |
| 1450 |
% Compatibility with \textsf{unicode-math} is a bit tricky! |
| 1451 |
% When given without an argument in the preamble, |
| 1452 |
% |\pinumber| uses an LGR font encoding called \texttt{lmr}. |
| 1453 |
% A new feature (v2.11) for |\pinumber| is provided with keyval options to |
| 1454 |
% use many other Greek pi letters without loading |
| 1455 |
% a whole package, thus without altering the other (italic) Greek letters. |
| 1456 |
% We achieve this with |\DeclareSymbolFont| and |\DeclareMathSymbol|. |
| 1457 |
% We just have to know the `name' of the desired symbol font. |
| 1458 |
% |
| 1459 |
% \medskip |
| 1460 |
% \begin{macrocode} |
| 1461 |
\newif\ifmm@lgr |
| 1462 |
\define@cmdkey{pifonts}[mm@]{lgrmath}[lmr]{\mm@lgrtrue} |
| 1463 |
\newif\ifmm@upgreek |
| 1464 |
\define@choicekey{pifonts}{upgreek}[\mm@upgreek@option]% |
| 1465 |
{Euler,Symbol,Symbolsmallscale}[Symbol]{\mm@upgreektrue} |
| 1466 |
\newif\ifmm@mathdesign |
| 1467 |
\define@choicekey{pifonts}{mathdesign}[\mm@mathdesign@option]% |
| 1468 |
{Utopia,Garamond,Charter}[Charter]{\mm@mathdesigntrue} |
| 1469 |
\newif\ifmm@kpfonts |
| 1470 |
\define@choicekey{pifonts}{kpfonts}[\mm@kp@option]% |
| 1471 |
{normal,light}[normal]{\mm@kpfontstrue} |
| 1472 |
\define@boolkeys{pifonts}[mm@]{fourier,pxfonts,txfonts}[true] |
| 1473 |
\newif\ifmm@fontspec |
| 1474 |
\define@cmdkey{pifonts}[mm@]{fontspec}[GFS Didot]{\mm@fontspectrue} |
| 1475 |
|
| 1476 |
\newcommand*\pifonts[1]{% |
| 1477 |
\setkeys{pifonts}{#1} |
| 1478 |
\let\pi\relax |
| 1479 |
|
| 1480 |
\ifmm@lgr |
| 1481 |
\DeclareFontEncoding{LGR}{}{} |
| 1482 |
\DeclareSymbolFont{mmupgr}{LGR}{\mm@lgrmath}{m}{n} |
| 1483 |
% may work with bold (b) instead of m |
| 1484 |
\DeclareMathSymbol{\pi}{\mathord}{mmupgr}{112} |
| 1485 |
|
| 1486 |
\else\ifmm@fontspec |
| 1487 |
\@ifpackageloaded{fontspec}{}{ |
| 1488 |
\PackageError{mismath}{\string\pinumber\space with |
| 1489 |
the `fontspec' option\MessageBreak |
| 1490 |
needs the fontspec package,\MessageBreak |
| 1491 |
which must be run with LuaLaTeX or XeLaTeX}{} |
| 1492 |
} |
| 1493 |
\newfontfamily\mismathgreekfont{\mm@fontspec}[NFSSFamily=mgr] |
| 1494 |
\DeclareSymbolFont{mmupgr}{TU}{mgr}{m}{n} |
| 1495 |
\Umathchardef\pi="7 \symmmupgr "03C0 |
| 1496 |
|
| 1497 |
\else\ifmm@upgreek |
| 1498 |
\ifdefstring{\mm@upgreek@option}{Euler}{ |
| 1499 |
\DeclareFontFamily{U}{eur}{\skewchar\font'177} |
| 1500 |
\DeclareFontShape{U}{eur}{m}{n}{% |
| 1501 |
<-6> eurm5 <6-8> eurm7 <8-> eurm10}{} |
| 1502 |
\DeclareSymbolFont{mmupgr}{U}{eur}{m}{n} |
| 1503 |
\DeclareMathSymbol{\pi}{\mathord}{mmupgr}{"19} |
| 1504 |
}{ |
| 1505 |
\ifdefstring{\mm@upgreek@option}{Symbol}{ |
| 1506 |
\DeclareSymbolFont{mmupgr}{U}{psy}{m}{n} |
| 1507 |
\DeclareMathSymbol{\pi}{\mathord}{mmupgr}{`p} |
| 1508 |
}{ |
| 1509 |
\ifdefstring{\mm@upgreek@option}{Symbolsmallscale}{ |
| 1510 |
\DeclareFontFamily{U}{fsy}{} |
| 1511 |
\DeclareFontShape{U}{fsy}{m}{n}{<->s*[.9]psyr}{} |
| 1512 |
\DeclareSymbolFont{mmupgr}{U}{fsy}{m}{n} |
| 1513 |
\DeclareMathSymbol{\pi}{\mathord}{mmupgr}{`p} |
| 1514 |
}{}}} |
| 1515 |
|
| 1516 |
\else\ifmm@mathdesign |
| 1517 |
\ifdefstring{\mm@mathdesign@option}{Utopia}{ |
| 1518 |
\DeclareSymbolFont{mmupgr}{OML}{mdput}{m}{n} |
| 1519 |
}{ |
| 1520 |
\ifdefstring{\mm@mathdesign@option}{Garamond}{ |
| 1521 |
\DeclareSymbolFont{mmupgr}{OML}{mdugm}{m}{n} |
| 1522 |
}{ |
| 1523 |
\ifdefstring{\mm@mathdesign@option}{Charter}{ |
| 1524 |
\DeclareSymbolFont{mmupgr}{OML}{mdbch}{m}{n} |
| 1525 |
}{}}} |
| 1526 |
|
| 1527 |
\else\ifmm@fourier |
| 1528 |
\DeclareFontEncoding{FML}{}{} |
| 1529 |
\DeclareSymbolFont{mmupgr}{FML}{futm}{m}{it} |
| 1530 |
|
| 1531 |
\else\ifmm@kpfonts |
| 1532 |
\ifdefstring{\mm@kp@option}{normal}{ |
| 1533 |
\DeclareSymbolFont{mmupgr}{U}{jkpmia}{m}{it} |
| 1534 |
}{ |
| 1535 |
\ifdefstring{\mm@kp@option}{light}{ |
| 1536 |
\DeclareSymbolFont{mmupgr}{U}{jkplmia}{m}{it} |
| 1537 |
}{}} |
| 1538 |
|
| 1539 |
\else\ifmm@pxfonts |
| 1540 |
\DeclareSymbolFont{mmupgr}{U}{pxmia}{m}{it} |
| 1541 |
|
| 1542 |
\else\ifmm@txfonts |
| 1543 |
\DeclareSymbolFont{mmupgr}{U}{txmia}{m}{it} |
| 1544 |
|
| 1545 |
\fi\fi\fi\fi\fi |
| 1546 |
\DeclareMathSymbol{\pi}{\mathord}{mmupgr}{"19} |
| 1547 |
\fi\fi\fi |
| 1548 |
} |
| 1549 |
|
| 1550 |
\newcommand*\pinumber[1][]{% |
| 1551 |
\ifthenelse{\equal{#1}{}}{% no argument given |
| 1552 |
\ifx\@onlypreamble\@notprerr % not in preamble |
| 1553 |
\@ifundefined{savedpi}{ |
| 1554 |
\PackageWarning{mismath}{% |
| 1555 |
\string\pinumber\space |
| 1556 |
must be used in the preamble first} |
| 1557 |
}{\let\pi\savedpi} |
| 1558 |
\else % in the preamble |
| 1559 |
\AtEndPreamble{\AtBeginDocument{ |
| 1560 |
\let\itpi\pi |
| 1561 |
\pifonts{lgrmath} |
| 1562 |
\let\savedpi\pi |
| 1563 |
}} |
| 1564 |
\fi |
| 1565 |
}{% command name or keyval options, necessarily in the preamble |
| 1566 |
\AtEndPreamble{\AtBeginDocument{% must be here with unicode-math |
| 1567 |
\let\itpi\pi |
| 1568 |
\@ifundefined{#1}{% |
| 1569 |
\pifonts{#1} |
| 1570 |
}{ |
| 1571 |
\ifmm@unicodemath |
| 1572 |
\ifthenelse{\equal{#1}{uppi}}{% or "1D70B |
| 1573 |
\renewcommand\pi{\symup{\symbol{"03C0}}} |
| 1574 |
\renewcommand\itpi{\symit{\symbol{"03C0}}} |
| 1575 |
}{\renewcommand{\pi}{\csname #1\endcsname}} |
| 1576 |
\else |
| 1577 |
\renewcommand{\pi}{\csname #1\endcsname} |
| 1578 |
\fi |
| 1579 |
} |
| 1580 |
\let\savedpi\pi |
| 1581 |
}} |
| 1582 |
} |
| 1583 |
} |
| 1584 |
|
| 1585 |
\newcommand{\pinormal}{% |
| 1586 |
\@ifundefined{itpi}{ |
| 1587 |
\PackageWarning{mismath}{Command \string\itpi\space undefined, |
| 1588 |
\MessageBreak |
| 1589 |
use \string\pinumber\space in the preamble first} |
| 1590 |
}{ |
| 1591 |
\ifmm@unicodemath |
| 1592 |
\@ifundefined{savedpi}{ |
| 1593 |
\PackageError{mismath}{Before using \string \pinormal, |
| 1594 |
\MessageBreak |
| 1595 |
you must call \string\pinumber\space in the preamble}{}} |
| 1596 |
\fi |
| 1597 |
\let\pi\itpi |
| 1598 |
} |
| 1599 |
} |
| 1600 |
|
| 1601 |
% \end{macrocode} |
| 1602 |
% When |\pinumber|\oarg{keyval} has been called, you can also get |
| 1603 |
% some other mathematical constants using Greek letters in the same font (\texttt{mmupgr}) |
| 1604 |
% \eg $\othergamma$, the Euler-Mascheroni constant: |
| 1605 |
% \begin{verbatim} |
| 1606 |
% \let\gamma\relax |
| 1607 |
% \DeclareMathSymbol{\gamma}{\mathord}{mmupgr}{"0D} |
| 1608 |
% \end{verbatim} |
| 1609 |
% \vspace{-2ex} |
| 1610 |
% If \textsf{unicode-math} is used, you must put these commands inside |
| 1611 |
% |\AtBeginDocument|. |
| 1612 |
% The hexadecimal code |"0D| depends on the option passed to |\pinumber| |
| 1613 |
% in the preamble (see the command |\pifonts| above and search in package docs). |
| 1614 |
% And to get the golden ratio $\othervarphi$: |
| 1615 |
% \begin{verbatim} |
| 1616 |
% \let\varphi\relax |
| 1617 |
% \DeclareMathSymbol{\varphi}{\mathord}{mmupgr}{"27} |
| 1618 |
% \end{verbatim} |
| 1619 |
% \vspace{-2ex} |
| 1620 |
% I you want to preserve the original $\gamma$ or $\varphi$, |
| 1621 |
% you can define |\upgamma| or |\upvarphi| instead. |
| 1622 |
% |
| 1623 |
% \medskip |
| 1624 |
% Commands for vectors and tensors follow. |
| 1625 |
% \medskip |
| 1626 |
% \begin{macrocode} |
| 1627 |
\newboolean{arrowvect} |
| 1628 |
\setboolean{arrowvect}{true} |
| 1629 |
\newcommand{\arrowvect}{\setboolean{arrowvect}{true}} |
| 1630 |
\newcommand{\boldvect}{\setboolean{arrowvect}{false}} |
| 1631 |
\newcommand{\boldvectcommand}{\boldsymbol} % from amsbsy package |
| 1632 |
\mm@macro{vect}{\ifthenelse{\boolean{arrowvect}}{ |
| 1633 |
\vv}{\boldvectcommand}} % doesn't work well with \if... \fi |
| 1634 |
\newcommand*{\hvect}[1]{\vect{\vphantom{A}#1}} |
| 1635 |
\newcommand*{\hvec}[1]{\vec{\vphantom{A}#1}} |
| 1636 |
|
| 1637 |
\newcommand*{\@norm}[1]{ |
| 1638 |
\mbox{\raisebox{1.75pt}{\small$\bigl\Vert$}} #1 |
| 1639 |
\mbox{\raisebox{1.75pt}{\small$\bigr\Vert$}} } |
| 1640 |
% works better than with relative length |
| 1641 |
\newcommand*{\@@norm}[1]{ |
| 1642 |
\mbox{\footnotesize\raisebox{1pt}{$\Vert$}} #1 |
| 1643 |
\mbox{\footnotesize\raisebox{1pt}{$\Vert$}} } |
| 1644 |
\newcommand*{\@@@norm}[1]{ |
| 1645 |
\mbox{\tiny\raisebox{1pt}{$\Vert$}} #1 |
| 1646 |
\mbox{\tiny\raisebox{1pt}{$\Vert$}} } |
| 1647 |
\@ifundefined{norm}{\providecommand*{\norm}[1]{ |
| 1648 |
\mathchoice{\@norm{#1}}{\@norm{#1}}{\@@norm{#1}}{\@@@norm{#1}} |
| 1649 |
} |
| 1650 |
}{\mm@warning{norm}} % bad result with libertinust1math |
| 1651 |
|
| 1652 |
\newcommand{\tensor}{\mathbfsfit} % isomath uses \mathsfbfit |
| 1653 |
|
| 1654 |
% \end{macrocode} |
| 1655 |
% |
| 1656 |
% `Operators', as for example common function names, are generally defined |
| 1657 |
% using the |\DeclareMathOperator| command or |\operatorname| for occasional use. |
| 1658 |
% Operators are then typeset in roman (upright) shape and with appropriate thin space |
| 1659 |
% before and after the operator name. |
| 1660 |
% However, for the `differential' operator d, no space should be left after it |
| 1661 |
% to obtain, for example, `$\di x$' instead of `$\operatorname{d} x$'. |
| 1662 |
% |
| 1663 |
% \medskip |
| 1664 |
% Two other operators, suggested by `quark67', representing differences |
| 1665 |
% or variations are defined by the macros |\opDelta| and |\opdelta|. |
| 1666 |
% They use the Greek letters $\upDelta$ and $\updelta$ with appropriate spacing, |
| 1667 |
% similar to |\di|. |
| 1668 |
% By default |\upDelta| will be an alias for |\Delta|. |
| 1669 |
% Generally, the uppercase Delta is upright |
| 1670 |
% unless a package is loaded to change this, but the lowercase delta |
| 1671 |
% is italic by default. |
| 1672 |
% |
| 1673 |
% To use the |\opdelta| macro, it is therefore necessary |
| 1674 |
% to load a package that provides the lowercase delta in upright shape, |
| 1675 |
% such as \textsf{mathgreeks} or \textsf{unicode-math}, |
| 1676 |
% or you can use the same symbol font \texttt{mmupgr} as seen above for the upright pi |
| 1677 |
% (if |\pinumber|\oarg{keyval} has been called previously). |
| 1678 |
% So you could get the upright delta with: |
| 1679 |
% \begin{verbatim} |
| 1680 |
% \DeclareMathSymbol{\updelta}{\mathord}{mmupgr}{"0E} |
| 1681 |
% \end{verbatim} \vspace{-2ex} |
| 1682 |
% The hexadecimal code |"0E| depends on the option passed to |\pinumber|. |
| 1683 |
% If you have loaded a package that provides upright shapes of Delta and delta, |
| 1684 |
% it may be necessary to create new aliases for |\upDelta| or |\updelta|, |
| 1685 |
% \eg |\let\updelta\|\meta{mydelta}. |
| 1686 |
% \begin{macrocode} |
| 1687 |
\mm@macro{di}{\operatorname{d}\mathopen{}} |
| 1688 |
\mm@macro{upDelta}{\Delta} |
| 1689 |
\mm@macro{opDelta}{\operatorname{\upDelta}\mathopen{}} |
| 1690 |
\mm@macro{opdelta}{\operatorname{\updelta}\mathopen{}} |
| 1691 |
|
| 1692 |
% \end{macrocode} |
| 1693 |
% For the field of probability, we provide the macros |\P|, |\E|, and |\V|, |
| 1694 |
% which are defined as operators. They are typeset in normal roman font, |
| 1695 |
% but can be changed to double-struck style (or another style) if desired. |
| 1696 |
% \begin{macrocode} |
| 1697 |
\newcommand\probastyle{} |
| 1698 |
\let\Par\P % end of paragraph symbol |
| 1699 |
\renewcommand{\P}{\operatorname{\probastyle{P}}} |
| 1700 |
\mm@macro{E}{\operatorname{\probastyle{E}}} |
| 1701 |
\mm@macro{V}{\operatorname{\probastyle{V}}} |
| 1702 |
|
| 1703 |
\newcommand*\MathProba[1]{% |
| 1704 |
\in@{P}{#1} \ifin@ \MathUp{P} \fi |
| 1705 |
\in@{E}{#1} \ifin@ \MathUp{E} \fi |
| 1706 |
\in@{V}{#1} \ifin@ \MathUp{V} \fi |
| 1707 |
} |
| 1708 |
|
| 1709 |
% \end{macrocode} |
| 1710 |
% Classic operators or function identifiers are presented below. They will be defined only |
| 1711 |
% if the option \texttt{nofunction} has not been activated. |
| 1712 |
% As for |\DeclareMathOperator| both arguments are generally similar. |
| 1713 |
% \medskip |
| 1714 |
% \begin{macrocode} |
| 1715 |
\ifmm@nofunction\else |
| 1716 |
\mm@operator{\adj}{adj} |
| 1717 |
\mm@operator{\Aut}{Aut} |
| 1718 |
\mm@operator{\codim}{codim} |
| 1719 |
\mm@operator{\coker}{coker} |
| 1720 |
\mm@operator{\Conv}{Conv} |
| 1721 |
\mm@operator{\cov}{cov} |
| 1722 |
\mm@operator{\Cov}{Cov} |
| 1723 |
\mm@macro{curl}{\operatorname{\vect{\mathup{curl}}}} |
| 1724 |
\mm@operator[divg]{\divg}{div} |
| 1725 |
|
| 1726 |
\mm@operator{\End}{End} |
| 1727 |
\mm@operator{\erf}{erf} |
| 1728 |
\mm@macro{grad}{\operatorname{\vect{\mathup{grad}}}} |
| 1729 |
\mm@operator{\id}{id} % mathop or mathord? |
| 1730 |
\mm@operator{\Id}{Id} |
| 1731 |
\mm@operator{\im}{im} |
| 1732 |
\mm@operator{\lb}{lb} |
| 1733 |
\mm@operator{\lcm}{lcm} |
| 1734 |
\mm@operator{\rank}{rank} |
| 1735 |
|
| 1736 |
\mm@operator{\Res}{Res} |
| 1737 |
\mm@macro{rot}{\operatorname{\vect{\mathup{rot}}}} |
| 1738 |
\mm@operator{\sgn}{sgn} |
| 1739 |
\mm@operator{\sinc}{sinc} |
| 1740 |
\mm@operator[spa]{\spa}{span} |
| 1741 |
\mm@operator{\tr}{tr} |
| 1742 |
\mm@operator{\var}{var} |
| 1743 |
\mm@operator{\Var}{Var} |
| 1744 |
\mm@operator[Zu]{\Zu}{Z} |
| 1745 |
|
| 1746 |
\mm@operator{\arccot}{arccot} |
| 1747 |
\mm@operator{\sech}{sech} |
| 1748 |
\mm@operator{\csch}{csch} |
| 1749 |
\mm@operator{\arsinh}{arsinh} |
| 1750 |
\mm@operator{\arcosh}{arcosh} |
| 1751 |
\mm@operator{\artanh}{artanh} |
| 1752 |
\mm@operator{\arcoth}{arcoth} |
| 1753 |
\mm@operator{\arsech}{arsech} |
| 1754 |
\mm@operator{\arcsch}{arcsch} |
| 1755 |
\fi |
| 1756 |
|
| 1757 |
% \end{macrocode} |
| 1758 |
% |
| 1759 |
% The |\mathcal| alphabet, from the original Computer Modern font family, |
| 1760 |
% is used here to produce $\Re$, $\Im$ and $\bigO$. |
| 1761 |
% Several font packages redefine this alphabet producing glyphs that may seem less |
| 1762 |
% suitable for the commands below. |
| 1763 |
% We have therefore retained the original |\cmmathcal| math alphabet, |
| 1764 |
% which can be used for other letters. |
| 1765 |
% If \textsf{unicode-math} is called, it will redefine the commands |\Re| and |\Im| |
| 1766 |
% in |\AtBeginDocument|, hence the use of |\AtEndPreamble{\AtBeginDocument{|\ldots |
| 1767 |
% to ensure that the \textsf{mismath} redefinitions occur after the actions |
| 1768 |
% of \textsf{unicode-math}. |
| 1769 |
% |
| 1770 |
% \begin{macrocode} |
| 1771 |
\DeclareFontFamily{U}{cmsy}{\skewchar\font48 } |
| 1772 |
\DeclareFontShape{U}{cmsy}{m}{n}{% from mathalpha |
| 1773 |
<-5.5> cmsy5% |
| 1774 |
<5.5-6.5> cmsy6% |
| 1775 |
<6.5-7.5> cmsy7% |
| 1776 |
<7.5-8.5> cmsy8% |
| 1777 |
<8.5-9.5> cmsy9% |
| 1778 |
<9.5-> cmsy10}{} |
| 1779 |
\DeclareMathAlphabet{\cmmathcal}{U}{cmsy}{m}{n} |
| 1780 |
|
| 1781 |
\AtEndPreamble{\AtBeginDocument{ |
| 1782 |
\ifmm@classicReIm\else |
| 1783 |
\let\oldRe\Re |
| 1784 |
\let\oldIm\Im |
| 1785 |
\ifmm@otherReIm |
| 1786 |
\renewcommand{\Re}{\cmmathcal{R}\mathit{e}} |
| 1787 |
\renewcommand{\Im}{\cmmathcal{I}\mathit{m}} |
| 1788 |
\else |
| 1789 |
\renewcommand{\Re}{\operatorname{Re}} |
| 1790 |
\renewcommand{\Im}{\operatorname{Im}} |
| 1791 |
\fi\fi |
| 1792 |
}} |
| 1793 |
|
| 1794 |
\mm@operator[bigO]{\bigO}{\cmmathcal{O}} |
| 1795 |
\mm@operator[bigo]{\bigo}{O} |
| 1796 |
\mm@operator[lito]{\lito}{o} |
| 1797 |
|
| 1798 |
% \end{macrocode} |
| 1799 |
% And finally we present the remaining macros. |
| 1800 |
% |
| 1801 |
% With Cyrillic languages, the command |\C| may already be defined |
| 1802 |
% but works only in text mode. |
| 1803 |
% Then, it will not be redefined by \textsf{mismath}. However, the command |
| 1804 |
% |\onlymathC| allows to use our |\C| macro in math mode, |
| 1805 |
% without interfering the definition of the text |\C| that is already defined. |
| 1806 |
% |
| 1807 |
% When using \XeTeX\ or \LuaTeX\ engines with the \textsf{hyperref} package, |
| 1808 |
% |\C| will be already defined and |
| 1809 |
% you get the message ``\texttt{Command \string\C\space unavailable in encoding TU}''. |
| 1810 |
% Therefore |\onlymathC| is automatically called in that case. |
| 1811 |
% \medskip |
| 1812 |
% \begin{macrocode} |
| 1813 |
\mm@macro{mathset}{\mathbf} |
| 1814 |
\mm@macro{R}{\mathset{R}} |
| 1815 |
\mm@macro{C}{\mathset{C}} |
| 1816 |
\AtBeginDocument{% \iftutex = LuaTex or XeTeX engines |
| 1817 |
\@ifpackageloaded{hyperref}{\iftutex\onlymathC\fi}{} } |
| 1818 |
\providecommand\onlymathC{\let\oldC\C |
| 1819 |
\renewcommand{\C}{\TextOrMath{\oldC}{\mathset{C}}} } |
| 1820 |
\mm@macro{N}{\mathset{N}} |
| 1821 |
\mm@macro{Z}{\mathset{Z}} |
| 1822 |
\mm@macro{Q}{\mathset{Q}} |
| 1823 |
\mm@macro{F}{\mathset{F}} |
| 1824 |
\mm@macro{K}{\mathset{K}} |
| 1825 |
|
| 1826 |
\mm@macro{ds}{\displaystyle} |
| 1827 |
\mm@macro{dlim}{\lim\limits} |
| 1828 |
\mm@macro{dsum}{\sum\limits} |
| 1829 |
\mm@macro{dprod}{\prod\limits} |
| 1830 |
\mm@macro{dcup}{\bigcup\limits} |
| 1831 |
\mm@macro{dcap}{\bigcap\limits} |
| 1832 |
|
| 1833 |
\mm@macro{lbar}{\overline} |
| 1834 |
\@ifundefined{hlbar}{ |
| 1835 |
\providecommand*{\hlbar}[1]{\overline{\vphantom{A}#1}}}{ |
| 1836 |
\mm@warning{hlbar} } |
| 1837 |
\newcommand\@eqdef{\stackrel{\mathup{def}}{=}} |
| 1838 |
\newcommand\@@eqdef{\stackrel{\upDelta}{=}} |
| 1839 |
\mm@macro{eqdef}{\@ifstar{\@@eqdef}{\@eqdef}} |
| 1840 |
\mm@macro{unbr}{\underbrace} |
| 1841 |
\mm@macro{iif}{if and only if\xspace} |
| 1842 |
\mm@macro{then}{\implies} |
| 1843 |
|
| 1844 |
\@ifundefined{txt}{ |
| 1845 |
\providecommand*{\txt}[1]{\quad\text{#1}\quad} }{ |
| 1846 |
\mm@warning{txt} } |
| 1847 |
\mm@macro{mul}{\mathclose{}\mathord{\times}\mathopen{}} |
| 1848 |
\@ifundefined{pow}{ |
| 1849 |
\providecommand*{\pow}[2]{\left( #1 \right)^{\!#2}} }{ |
| 1850 |
\mm@warning{pow} } |
| 1851 |
% \end{macrocode} |
| 1852 |
% For |\abs|, the |\left...\right| structure is inserted within a pair of curly braces |
| 1853 |
% to prevent incorrect spacing before the first delimiter when it follows a function name, |
| 1854 |
% in cases where the package \textsf{mleftright} is used |
| 1855 |
% with the command |\mleftright| activated. |
| 1856 |
% This issue was pointed out by `quark67'. |
| 1857 |
% \begin{macrocode} |
| 1858 |
\@ifundefined{abs}{ |
| 1859 |
\providecommand*{\abs}[1]{{\left\vert#1\right\vert}} }{ |
| 1860 |
\mm@warning{abs} } |
| 1861 |
\@ifundefined{lfrac}{ |
| 1862 |
\providecommand*{\lfrac}[3][7mu]{% |
| 1863 |
\frac{\mkern#1#2\mkern#1}{\mkern#1#3\mkern#1}} }{ |
| 1864 |
\mm@warning{lfrac} } |
| 1865 |
|
| 1866 |
\newcommand{\systemstretch}{1.2} |
| 1867 |
\newcommand{\systemsep}{\medspace} |
| 1868 |
\newenvironment{system}[1][l]{ |
| 1869 |
\renewcommand{\arraystretch}{\systemstretch} |
| 1870 |
\setlength{\arraycolsep}{0.15em} |
| 1871 |
\left\{\begin{array}{@{\systemsep}#1@{}} % |
| 1872 |
}{\end{array}\right.} |
| 1873 |
|
| 1874 |
\newenvironment{spmatrix}{ |
| 1875 |
\left(\begin{smallmatrix} |
| 1876 |
}{\end{smallmatrix}\right)} |
| 1877 |
|
| 1878 |
\newenvironment{mathcols}{% needs multicol package |
| 1879 |
\ifmm@multicol |
| 1880 |
\renewcommand{\columnseprule}{0.1pt} |
| 1881 |
\begin{multicols}{2} |
| 1882 |
\par\noindent\hfill |
| 1883 |
\begin{math}\begin{aligned}\displaystyle |
| 1884 |
\else |
| 1885 |
\PackageError{mismath}{The mathcols environment |
| 1886 |
needs the multicol package}{Call the package multicol |
| 1887 |
in your preamble.} |
| 1888 |
\fi |
| 1889 |
}{ \end{aligned}\end{math} \hfill\mbox{} |
| 1890 |
\end{multicols} |
| 1891 |
} |
| 1892 |
\newcommand{\changecol}{% |
| 1893 |
\end{aligned}\end{math} \hfill\mbox{} |
| 1894 |
\par\noindent\hfill |
| 1895 |
\begin{math}\begin{aligned}\displaystyle} |
| 1896 |
% \end{macrocode} |
| 1897 |
% |
| 1898 |
% \section*{Change History} |
| 1899 |
% |
| 1900 |
% \begin{multicols}{2}\begin{raggedright} |
| 1901 |
% \renewcommand\changes[3]{\item[#1 \ (#2)] \mbox{}\\ #3} |
| 1902 |
% \setlength{\compactlistindent}{-1em} |
| 1903 |
% \begin{list}{}{\setlength\labelwidth{1.4em}\setlength{\leftmargin}{2em} |
| 1904 |
% \setlength{\parsep}{0pt}} |
| 1905 |
% |
| 1906 |
% \changes{v0.1}{2011/12/27}{First personal version.} |
| 1907 |
% |
| 1908 |
% \changes{v1.0}{2019/04/11}{Initial published version.} |
| 1909 |
% |
| 1910 |
% \changes{v1.1}{2019/04/20}{ |
| 1911 |
% Changing the default font for \cs{pinumber} from Euler to Symbol.} |
| 1912 |
% |
| 1913 |
% \changes{v1.2}{2019/04/27}{ |
| 1914 |
% \begin{compactlist} |
| 1915 |
% \item commands \cs{enumber}, \cs{inumber}, \cs{jnumber} in \cs{AtBeginDocument}\\ |
| 1916 |
% \hand works fine with \textsf{beamer} now, |
| 1917 |
% \item new general \cs{mm@operator} macro, |
| 1918 |
% \item using \cs{mathup} instead of \cs{mathrm}, |
| 1919 |
% \item including \textsf{mathtools}, |
| 1920 |
% \item in \cs{DeclareSymbolFont} 'Roman' changed to 'up', |
| 1921 |
% \item changes in the documentation, |
| 1922 |
% \item replacing \cs{PEroman} by \cs{PEupright}. |
| 1923 |
% \end{compactlist}} |
| 1924 |
% |
| 1925 |
% \changes{v1.3}{2019/05/08}{ |
| 1926 |
% \begin{compactlist} |
| 1927 |
% \item using \cs{bslash} in the internal \cs{mm@warning} macro |
| 1928 |
% to type out a control sequence whose name is given as parameter, |
| 1929 |
% \item including the \textsf{mathfixs} package, |
| 1930 |
% \item many corrections in the documentation. |
| 1931 |
% \end{compactlist}} |
| 1932 |
% |
| 1933 |
% \changes{v1.4}{2019/05/22}{ |
| 1934 |
% In \cs{DeclareSymbolFont} 'up' chan\-ged to 'UpSh' |
| 1935 |
% to prevent incompatibility with \textsf{unicode-math}.} |
| 1936 |
% |
| 1937 |
% \changes{v1.5}{2019/05/30}{ |
| 1938 |
% \begin{compactlist} |
| 1939 |
% \item a solution for using \cs{mul} with \cs{frac} \hand use braces, |
| 1940 |
% \item addition of the \cs{paren} macro. |
| 1941 |
% \end{compactlist}} |
| 1942 |
% |
| 1943 |
% \changes{v1.6}{2019/09/06}{ |
| 1944 |
% Removing the \textsf{mathfixs} package because of problems with fractions.} |
| 1945 |
% |
| 1946 |
% \changes{v1.7}{2019/12/27}{ |
| 1947 |
% Adding a table of contents to the documentation.} |
| 1948 |
% |
| 1949 |
% \changes{v1.8}{2020/11/15}{ |
| 1950 |
% Small changes in the documentation, in particular |
| 1951 |
% an incompatibility is mentioned when using `i' with accent in \textsf{beamer} titles: |
| 1952 |
% (use \texttt{\textbackslash\textasciicircum i} instead of î).} |
| 1953 |
% |
| 1954 |
% \changes{v1.9}{2022/10/17}{ |
| 1955 |
% \begin{compactlist} |
| 1956 |
% \item in \cs{DeclareSymbolFont} 'UpSh' replaced by 'operators' |
| 1957 |
% \item\cs{PackageWarning} replaced by \cs{PackageWarningNoLine} for existing macros, |
| 1958 |
% \item \cs{thickspace} replaces \cs{medspace} in \cs{lfrac}, |
| 1959 |
% \item changing the documentation font: from lmodern to Palatino (\textsf{mathpazo}). |
| 1960 |
% \end{compactlist}} |
| 1961 |
% |
| 1962 |
% \changes{v1.10}{2022/10/25}{ |
| 1963 |
% \cs{pinumber} code updated to prevent incompatibility |
| 1964 |
% with the new version of the \textsf{frenchmath} package |
| 1965 |
% (in which the default 'upgreek' option has been changed from Symbol to Euler).} |
| 1966 |
% |
| 1967 |
% \changes{v2.0}{2022/11/11}{ |
| 1968 |
% \begin{compactlist} |
| 1969 |
% \item enhancing \cs{pinumber} to use other Greek letters packages |
| 1970 |
% (it is no longer compatible with the older), |
| 1971 |
% \item \cs{paren} has been removed (useless), |
| 1972 |
% \item \cs{hvect} and \cs{hlbar} have been slightly modified (\cs{phantom}\texttt{\{t\}} |
| 1973 |
% instead of \cs{phantom}\texttt{\{h\}}), |
| 1974 |
% \item several changes in the documentation |
| 1975 |
% (now the Charter font is used, with the \textsf{mathdesign} package). |
| 1976 |
% \end{compactlist}} |
| 1977 |
% |
| 1978 |
% \changes{v2.1}{2022/12/26}{ |
| 1979 |
% \begin{compactlist} |
| 1980 |
% \item including the \textsf{ibrackets} package to improve |
| 1981 |
% the management of square brackets, |
| 1982 |
% \item new macros \cs{codim}, \cs{sinc}, \cs{var}, \cs{eqdef*}, |
| 1983 |
% \item removing the warning for the obsolete \cs{paren} command, |
| 1984 |
% \item a small change in the \cs{norm} command (bars in small size), |
| 1985 |
% \item several changes in documentation. |
| 1986 |
% \end{compactlist}} |
| 1987 |
% |
| 1988 |
% \changes{v2.2}{2023/01/06}{ |
| 1989 |
% New option \texttt{ibrackets} to load the \textsf{ibrackets} package |
| 1990 |
% \emph{optionally} because of errors |
| 1991 |
% when using \cs{DeclarePairedDelimiter} with square brackets.} |
| 1992 |
% |
| 1993 |
% \changes{v2.3}{2023/02/09}{ |
| 1994 |
% Introducing keyval options as an alternative to \cs{enumber}, |
| 1995 |
% \cs{inumber}, \cs{jnumber}, \cs{PEupright}, |
| 1996 |
% and also for using ibrackets, \cs{boldvect} and \cs{arrowvect}.} |
| 1997 |
% |
| 1998 |
% \changes{v2.4}{2023/02/18}{ |
| 1999 |
% \begin{compactlist} |
| 2000 |
% \item new powerful macros \cs{MathUp}, \cs{MathIt}, |
| 2001 |
% (and \cs{MathNumbers}, \cs{MathProba}, \cs{MathNormal}), |
| 2002 |
% \item keyval options are no longer useful and have been removed, |
| 2003 |
% \item loading the package \textsf{ifthen} has been forgotten in v2.3 |
| 2004 |
% (causing possible issues), |
| 2005 |
% \item no more incompatibility when using `i' with accent in \textsf{beamer} titles. |
| 2006 |
% \end{compactlist}} |
| 2007 |
% |
| 2008 |
% \changes{v2.5}{2023/02/23}{ |
| 2009 |
% \begin{compactlist} |
| 2010 |
% \item unification of the code of \cs{MathUp} and \cs{MathIt}, |
| 2011 |
% \item a new powerful macro \cs{apply} is used in \cs{MathNormal} to act on a list, |
| 2012 |
% \item new \cs{tensor} command. |
| 2013 |
% \end{compactlist}} |
| 2014 |
% |
| 2015 |
% \changes{v2.6}{2023/03/01}{ |
| 2016 |
% \begin{compactlist} |
| 2017 |
% \item bug fix in \cs{mm@macro}, |
| 2018 |
% \item solving incompatibility of the \cs{C} macro when using \textsf{babel} with Russian |
| 2019 |
% (thanks to Murray Eisenberg for this bug report on TeX StackExchange), |
| 2020 |
% \item \cs{mathrm} added in the macro \cs{eqdef*}. |
| 2021 |
% \end{compactlist}} |
| 2022 |
% |
| 2023 |
% \changes{v2.7}{2023/03/05}{ |
| 2024 |
% \begin{compactlist} |
| 2025 |
% \item macros for sets of numbers (\cs{R}, \cs{C}\ldots) now available only in math mode |
| 2026 |
% (following remarks by David Carlisle and Enrico Gregorio), |
| 2027 |
% \item special warning when loading \textsf{babel} with Russian |
| 2028 |
% (\cs{C} will not be defined in that case). |
| 2029 |
% \end{compactlist}} |
| 2030 |
% |
| 2031 |
% \changes{v2.8}{2023/07/26}{ |
| 2032 |
% New macro \cs{onlymathC} designed for using \cs{C} in pmath mode |
| 2033 |
% when Russian language is loaded.} |
| 2034 |
% |
| 2035 |
% \changes{v2.9}{2023/12/19}{ |
| 2036 |
% New option \texttt{decimalcomma}.} |
| 2037 |
% |
| 2038 |
% \changes{v2.10}{2024/02/20}{ |
| 2039 |
% \begin{compactlist} |
| 2040 |
% \item better compatibility with \textsf{unicode-math}: |
| 2041 |
% for the options \texttt{ibrackets}, \texttt{decimalcomma} |
| 2042 |
% and the commands \cs{MathUp}, \cs{MathIt}, |
| 2043 |
% \item explicit error message when using \texttt{mathcols} |
| 2044 |
% without loading the \textsf{multicol} package. |
| 2045 |
% \end{compactlist}} |
| 2046 |
% |
| 2047 |
% \changes{v2.11}{2024/02/26}{ |
| 2048 |
% \begin{compactlist}\setlength\compactlistindent{-0.5em} |
| 2049 |
% \item enhancements of the \cs{pinumber} macro with keyval options: |
| 2050 |
% \begin{compactlist}[\dash] |
| 2051 |
% \item no necessity to load a Greek letters package, |
| 2052 |
% \item improvements of compatibility with \textsf{unicode-math}; |
| 2053 |
% \end{compactlist} |
| 2054 |
% \item changing the font to Adobe Utopia with the package \textsf{fourier}. |
| 2055 |
% \end{compactlist}} |
| 2056 |
% |
| 2057 |
% \changes{v2.12}{2024/02/29}{ |
| 2058 |
% \begin{compactlist} |
| 2059 |
% \item the \textsf{xparse} package has been removed by mistake in v2.11, |
| 2060 |
% causing some compatibility issues, it is loaded again by \textsf{mismath}, |
| 2061 |
% \item improvements to make \cs{pinumber} work better with \textsf{unicode-math}. |
| 2062 |
% \end{compactlist}} |
| 2063 |
% |
| 2064 |
% \changes{v3.0}{2024/03/15}{ |
| 2065 |
% \begin{compactlist} |
| 2066 |
% \item rewriting the \cs{pinumber} command with a new \cs{pifonts} macro, |
| 2067 |
% \item presenting other \texttt{lgrmath} values for \cs{pinumber} in the doc, |
| 2068 |
% \item The \cs{C} macro is now inside \cs{AtBeginDocument}, |
| 2069 |
% \item \textsf{amsmath} isn't loaded explicitly because \textsf{mathtools} loads it, |
| 2070 |
% \item bug fix with options \texttt{decimalcomma} and \texttt{ibrackets}, |
| 2071 |
% \item new option \texttt{nofunction} to lighten the package loading, |
| 2072 |
% \item addition of macros \cs{coker} and \cs{Res} as standard operator names, |
| 2073 |
% \item new option \texttt{classicReIm} to deactivate \cs{Im} and \cs{Re} redefinition, |
| 2074 |
% \item new option \texttt{otherReIm} to provide an alternative writing |
| 2075 |
% with \texttt{cmsy} font, |
| 2076 |
% \item removing the \cs{PEupright} command, |
| 2077 |
% \item default space in the \cs{lfrac} macro increased from \texttt{\textbackslash:} |
| 2078 |
% (5mu) to 7mu, |
| 2079 |
% \item new optional parameter for adjusting the space in \cs{lfrac}, |
| 2080 |
% \item changing the \cs{vphantom} argument in \cs{hvect}, \cs{hvec} and \cs{lbar} |
| 2081 |
% from `t' to `A', looks better. |
| 2082 |
% \end{compactlist}} |
| 2083 |
% |
| 2084 |
% \changes{v3.1}{2024/06/16}{ |
| 2085 |
% \begin{compactlist}\setlength\compactlistindent{-0.5em} |
| 2086 |
% \item adding a change history, |
| 2087 |
% \item bug fix with the \cs{C} macro when using \textsf{hyperref} with |
| 2088 |
% \LuaTeX{} or \XeTeX{} engines, |
| 2089 |
% \item the $\upDelta$ produced in \cs{eqdef*} is now obtained with \cs{upDelta} |
| 2090 |
% (\cs{mathrm}, used before, doesn't work generally), |
| 2091 |
% \item several relevant suggestions and remarks by `quark67': |
| 2092 |
% \begin{compactlist}[\dash] |
| 2093 |
% \item new macros for variations \cs{opDelta} and small variations \cs{opdelta}, |
| 2094 |
% \item redefinition of \cs{then} as an alias for \cs{implies}, |
| 2095 |
% \item improvement of the \cs{abs} macro, |
| 2096 |
% \item including the \textsf{mleftright} package; |
| 2097 |
% \end{compactlist} |
| 2098 |
% \item new implementation of \cs{di}, |
| 2099 |
% \item improvement of the \cs{mul} macro. |
| 2100 |
% \end{compactlist}} |
| 2101 |
% |
| 2102 |
% \changes{v3.2}{2025/10/08}{ |
| 2103 |
% \begin{compactlist} |
| 2104 |
% \item conditional loading of the \textsf{xparse} package since it is obsolete |
| 2105 |
% with the October 2020 \LaTeX\ release, |
| 2106 |
% \item when used in the preamble \cs{pinumber} in now called within \cs{AtEndPreamble} |
| 2107 |
% to preserve its effect when used in combination with the \textsf{mathgreeks} package. |
| 2108 |
% \end{compactlist}} |
| 2109 |
% |
| 2110 |
% \end{list}\end{raggedright} |
| 2111 |
% \end{multicols} |
| 2112 |
% |
| 2113 |
% \begin{thebibliography}{35} |
| 2114 |
% \begin{raggedright} |
| 2115 |
% \bibitem{TYPMA} \emph{Typesetting mathematics for science and technology according |
| 2116 |
% to ISO 31/XI}, Claudio Beccari, TUGboat Volume 18 (1997), No.~1. |
| 2117 |
% \url{http://www.tug.org/TUGboat/tb18-1/tb54becc.pdf}. |
| 2118 |
% \bibitem{NIST} \emph{Typefaces for Symbols in Scientific Manuscripts}, |
| 2119 |
% \url{https://www.physics.nist.gov/cuu/pdf/typefaces.pdf}. |
| 2120 |
% \bibitem{SI} \emph{Guide for the Use of the International System of Units (SI)}, |
| 2121 |
% NIST (National Institute of Standards and Technology), updated March 4, 2020 |
| 2122 |
% \url{https://www.nist.gov/pml/special-publication-811}. |
| 2123 |
% \bibitem{ICTNS} \emph{On the Use of Italic and up Fonts for Symbols in Scientific Text}, |
| 2124 |
% I.M.~Mills and W.V.~Metanomski, ICTNS (Interdivisional Committee |
| 2125 |
% on Terminology, Nomenclature and Symbols), dec 1999, |
| 2126 |
% \url{https://old.iupac.org/standing/idcns/italic-roman_dec99.pdf}. |
| 2127 |
% \bibitem{VECT} \emph{\textsf{esvect} -- Typesetting vectors with beautiful |
| 2128 |
% arrow with \LaTeXe}, Eddie Saudrais, CTAN, v1.3 2013/07/11. |
| 2129 |
% \bibitem{MLR} \emph{The \textsf{mleftright} package}, Heiko Oberdiek, CTAN, v1.2 2019/12/03. |
| 2130 |
% \bibitem{TOOL} \emph{The \textsf{mathtools} package}, Morten Høgholm, Lars Madsen, CTAN, |
| 2131 |
% v1.29 2022/06/29. |
| 2132 |
% \bibitem{AMS} \emph{\textsf{amsmath} -- \AmS\ mathmatical facilities for \LaTeX}, |
| 2133 |
% Frank Mittelbach, Rainer Schöpf, Michael Downes, Davis M.~Jones, David Carlisle, |
| 2134 |
% CTAN, v2.17n 2022/04/08. |
| 2135 |
% \bibitem{UNIC} \emph{Experimental Unicode mathematical typesetting: |
| 2136 |
% The \textsf{unicode-math} package}, Will Robertson, Philipp Stephani, Joseph Wright, |
| 2137 |
% Khaled Hosny, and others, CTAN, v0.8r 2023/08/13. |
| 2138 |
% \bibitem{FIXM} \emph{The \textsf{fixmath} package for \LaTeXe}, Walter Schmidt, |
| 2139 |
% CTAN, v0.9 2000/04/11. |
| 2140 |
% \bibitem{ISOM} \emph{\textsf{isomath} -- Mathematical style for science and technology}, |
| 2141 |
% Günter Milde, CTAN, v0.6.1 2012/09/04. |
| 2142 |
% \bibitem{PMISO} \emph{\textsf{PM-ISOmath}, The Poor Man ISO math bundle}, |
| 2143 |
% the \textsf{pm-isomath} package by Claudio Beccari, CTAN, v1.2.00 2021/08/04. |
| 2144 |
% \bibitem{MGREEK} \emph{The \textsf{mathgreeks} package}, Antoine Missier, CTAN, |
| 2145 |
% v1.2 2024/05/07. |
| 2146 |
% \bibitem{GREEK} \emph{The \textsf{upgreek} package for \LaTeXe}, Walter Schmidt, |
| 2147 |
% CTAN, v2.0 2003/02/12. |
| 2148 |
% \bibitem{DESIGN} \emph{The \textsf{mathdesign} package}, |
| 2149 |
% Paul Pichaureau, CTAN, v2.31 2013/08/29. |
| 2150 |
% \bibitem{KPF} \emph{\textsf{Kp-Fonts} -- The Johannes Kepler project}, |
| 2151 |
% Christophe Caignaert, CTAN, v3.34 20/09/2022. |
| 2152 |
% \bibitem{FOUR} \textsf{Fourier-GUT\hspace{-0.1em}\emph{enberg}}, |
| 2153 |
% Michel Bovani, CTAN, v1.3 2005/01/30. |
| 2154 |
% \bibitem{PX} \emph{\textsf{PX Fonts} -- Palatino-like fonts in support of mathematics}, |
| 2155 |
% Young Ryu, CTAN, 2000/12/14. |
| 2156 |
% \bibitem{TX} \emph{\textsf{TX Fonts} -- Times-like fonts in support of mathematics}, |
| 2157 |
% Young Ryu, CTAN, 2000/12/15. |
| 2158 |
% \bibitem{LIB} \emph{The LibertinusT1 Math Package}, Michael Sharpe, CTAN, v2.0.4 2024/01/14. |
| 2159 |
% \bibitem{LGR} \emph{The \textsf{lgrmath} package}, Jean-François B., CTAN, v1.0 2022/11/16. |
| 2160 |
% \bibitem{NTX} \emph{New TX font package}, Micahel Sharpe, CTAN, v1.735 2024/03/01. |
| 2161 |
% \bibitem{ALPHA} \emph{The \textsf{textalpha} package} |
| 2162 |
% (part of the \textsf{greek-fontenc} bundle), Günter Milde, CTAN, v2.1 2022/06/14. |
| 2163 |
% \bibitem{SPA} \emph{The \textsf{spacingtricks} package}, Antoine Missier, CTAN, |
| 2164 |
% v1.8 2023/12/06. |
| 2165 |
% \bibitem{BRACKET} \emph{Intelligent brackets -- The \textsf{ibrackets} package}, |
| 2166 |
% Antoine Missier, CTAN, v1.2, 2023/07/26. |
| 2167 |
% \bibitem{INT} \emph{The \textsf{interval} package}, Lars Madsen, CTAN, |
| 2168 |
% v0.4 2019/03/06. |
| 2169 |
% \bibitem{ICOMMA} \emph{The \textsf{icomma} package for \LaTeXe}, |
| 2170 |
% Walter Schmidt, CTAN, v2.0 2002/03/10. |
| 2171 |
% \bibitem{NCC} \emph{The \textsf{ncccomma} package}, Alexander I.~Rozhenko, |
| 2172 |
% CTAN, v1.0 2005/02/10. |
| 2173 |
% \bibitem{DEC} \emph{The \textsf{decimalcomma} package}, Antoine Missier, |
| 2174 |
% CTAN, v1.4 2023/12/30. |
| 2175 |
% \bibitem{SYST} \emph{L'extension pour \TeX\ et \LaTeX\ \textsf{systeme}}, |
| 2176 |
% Christian Tellechea, CTAN, v0.32 2019/01/13. |
| 2177 |
% \bibitem{SPAL} \emph{The \textsf{spalign} package}, Joseph Rabinoff, CTAN, 2016/10/05. |
| 2178 |
% \bibitem{NMATX} \emph{The package \textsf{nicematrix}}, François Pantigny, CTAN, |
| 2179 |
% v6.14 2023/02/18. |
| 2180 |
% \bibitem{FR} \emph{L'extension \textsf{frenchmath}}, Antoine Missier, CTAN, v3.0 2024/05/04. |
| 2181 |
% \bibitem{LSHORT} \emph{The Not So Short Introduction to \LaTeXe}, |
| 2182 |
% the \textsf{lshort} package by |
| 2183 |
% Tobias Oetiker, Hubert Partl, Irene Hyna and Elisabeth Schlegl, CTAN, v6.4 2021/04/09. |
| 2184 |
% \url{http://tug.ctan.org/info/lshort/english/lshort.pdf}. |
| 2185 |
% \bibitem{COMP} \emph{The \LaTeX\ Companion}, Frank Mittelbach, Michel Goossens, |
| 2186 |
% Johannes Braams, David Carlisle, Chris Rowley, 2nd edition, Pearson Education, 2004. |
| 2187 |
% \end{raggedright} |
| 2188 |
% \end{thebibliography} |
| 2189 |
|
| 2190 |
% \Finale |
| 2191 |
\endinput |