| 1 |
% \iffalse meta-comment |
| 2 |
% |
| 3 |
% Copyright (C) 2005 by Scott Pakin <[email protected]> |
| 4 |
% ------------------------------------------------------- |
| 5 |
% |
| 6 |
% This file may be distributed and/or modified under the |
| 7 |
% conditions of the LaTeX Project Public License, either version 1.2 |
| 8 |
% of this license or (at your option) any later version. |
| 9 |
% The latest version of this license is in: |
| 10 |
% |
| 11 |
% http://www.latex-project.org/lppl.txt |
| 12 |
% |
| 13 |
% and version 1.2 or later is part of all distributions of LaTeX |
| 14 |
% version 1999/12/01 or later. |
| 15 |
% |
| 16 |
% \fi |
| 17 |
% |
| 18 |
% \iffalse |
| 19 |
%<*driver> |
| 20 |
\ProvidesFile{listliketab.dtx} |
| 21 |
%</driver> |
| 22 |
%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01] |
| 23 |
%<package>\ProvidesPackage{listliketab} |
| 24 |
%<*package> |
| 25 |
[2005/01/09 v1.0a Create list-like tabulars] |
| 26 |
%</package> |
| 27 |
% |
| 28 |
%<*driver> |
| 29 |
\documentclass{ltxdoc} |
| 30 |
\usepackage{listliketab} |
| 31 |
\usepackage{tabularx} |
| 32 |
\usepackage{amstext} |
| 33 |
\usepackage{hyperref} |
| 34 |
\EnableCrossrefs |
| 35 |
\CodelineIndex |
| 36 |
\RecordChanges |
| 37 |
\begin{document} |
| 38 |
\DocInput{listliketab.dtx} |
| 39 |
\phantomsection |
| 40 |
\addcontentsline{toc}{section}{Change History} |
| 41 |
\PrintChanges |
| 42 |
\phantomsection |
| 43 |
\addcontentsline{toc}{section}{Index} |
| 44 |
\PrintIndex |
| 45 |
\end{document} |
| 46 |
%</driver> |
| 47 |
% \fi |
| 48 |
% |
| 49 |
% \CheckSum{100} |
| 50 |
% |
| 51 |
% \CharacterTable |
| 52 |
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 53 |
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 54 |
% Digits \0\1\2\3\4\5\6\7\8\9 |
| 55 |
% Exclamation \! Double quote \" Hash (number) \# |
| 56 |
% Dollar \$ Percent \% Ampersand \& |
| 57 |
% Acute accent \' Left paren \( Right paren \) |
| 58 |
% Asterisk \* Plus \+ Comma \, |
| 59 |
% Minus \- Point \. Solidus \/ |
| 60 |
% Colon \: Semicolon \; Less than \< |
| 61 |
% Equals \= Greater than \> Question mark \? |
| 62 |
% Commercial at \@ Left bracket \[ Backslash \\ |
| 63 |
% Right bracket \] Circumflex \^ Underscore \_ |
| 64 |
% Grave accent \` Left brace \{ Vertical bar \| |
| 65 |
% Right brace \} Tilde \~} |
| 66 |
% |
| 67 |
% |
| 68 |
% \changes{v1.0}{2000/09/08}{Initial version} |
| 69 |
% \changes{v1.0a}{2005/01/09}{Cleaned up the \string\texttt{.dtx} file} |
| 70 |
% |
| 71 |
% \GetFileInfo{listliketab.dtx} |
| 72 |
% |
| 73 |
% \DoNotIndex{\begin,\catcode,\DeclareRobustCommand,\def,\dp,\end} |
| 74 |
% \DoNotIndex{\expandafter,\gdef,\global,\hfill,\hspace,\ht} |
| 75 |
% \DoNotIndex{\ignorespaces,\ignorespacesafterend,\item} |
| 76 |
% \DoNotIndex{\newenvironment,\newlength,\newsavebox,\noindent} |
| 77 |
% \DoNotIndex{\ratio,\renewcommand,\setlength,\strip@pt,\strutbox} |
| 78 |
% \DoNotIndex{\vspace,\xdef} |
| 79 |
% |
| 80 |
% |
| 81 |
% \title{The \textsf{listliketab} package\thanks{This document |
| 82 |
% corresponds to \textsf{listliketab}~\fileversion, dated \filedate.}} |
| 83 |
% \author{Scott Pakin \\ \texttt{[email protected]}} |
| 84 |
% |
| 85 |
% \hypersetup{^^A |
| 86 |
% pdftitle={The listliketab package}, |
| 87 |
% pdfauthor={Scott Pakin <[email protected]>}, |
| 88 |
% pdfsubject={LaTeX package to make tabulars look like lists}, |
| 89 |
% pdfkeywords={tabulars, tables, lists, itemize, enumerate, columns} |
| 90 |
% } |
| 91 |
% |
| 92 |
% \maketitle |
| 93 |
% \sloppy |
| 94 |
% |
| 95 |
% ^^A Define an environment for command/environment delcarations. |
| 96 |
% \newsavebox{\declbox} |
| 97 |
% \newenvironment{decl}{% |
| 98 |
% \begin{lrbox}{\declbox}\begin{tabular}{l}}{% |
| 99 |
% \end{tabular}\end{lrbox}% |
| 100 |
% \vspace{3ex}\noindent\hspace*{-3em}\fbox{\usebox{\declbox}}\vspace*{2ex}} |
| 101 |
% |
| 102 |
% \begin{abstract} |
| 103 |
% The \texttt{listliketab} package helps the user make list-like |
| 104 |
% \texttt{tabular}s, i.e., a \texttt{tabular} that is indistinguishable |
| 105 |
% from an \texttt{itemize} or \texttt{enumerate} environment. |
| 106 |
% The advantage of using a \texttt{tabular} is that the user can add |
| 107 |
% additional columns to each entry in the list. |
| 108 |
% \end{abstract} |
| 109 |
% |
| 110 |
% \section{Introduction} |
| 111 |
% |
| 112 |
% Here's an itemized list: |
| 113 |
% |
| 114 |
% \begin{itemize} |
| 115 |
% \item Fee |
| 116 |
% \item Fi |
| 117 |
% \item Fo |
| 118 |
% \item Fum |
| 119 |
% \end{itemize} |
| 120 |
% |
| 121 |
% \noindent |
| 122 |
% Here's another itemized list: |
| 123 |
% |
| 124 |
% \storestyleof{itemize} |
| 125 |
% \begin{listliketab} |
| 126 |
% \begin{tabular}{LlR} |
| 127 |
% \textbullet & Fee \\ |
| 128 |
% \textbullet & Fi \\ |
| 129 |
% \textbullet & Fo \\ |
| 130 |
% \textbullet & Fum |
| 131 |
% \end{tabular} |
| 132 |
% \end{listliketab} |
| 133 |
% |
| 134 |
% What's the difference? The two look identical, but the first was typeset |
| 135 |
% in the ordinary way, with an \texttt{itemize} environment. The second |
| 136 |
% was typeset within a \texttt{tabular} environment, using the |
| 137 |
% \texttt{listliketab} package. Because the second is a \texttt{tabular}, |
| 138 |
% it can contain additional columns on each line: |
| 139 |
% |
| 140 |
% \begin{listliketab} |
| 141 |
% \begin{tabular}{Ll@{\hspace*{2cm}}|lR} |
| 142 |
% \textbullet & Fee & |
| 143 |
% We can have additional text (and rules) with each item. \\ |
| 144 |
% \textbullet & Fi & |
| 145 |
% Try doing \emph{that} in an \texttt{itemize} environment! \\ |
| 146 |
% \textbullet & Fo \\ |
| 147 |
% \textbullet & Fum & |
| 148 |
% Not so easy, is it? |
| 149 |
% \end{tabular} |
| 150 |
% \end{listliketab} |
| 151 |
% |
| 152 |
% \texttt{listliketab} works with enumerated lists, too: |
| 153 |
% |
| 154 |
% \storestyleof{enumerate} |
| 155 |
% \begin{listliketab} |
| 156 |
% \newcounter{lltenum}\setcounter{lltenum}{0} |
| 157 |
% \newcommand{\nextnum}{\addtocounter{lltenum}{1}\thelltenum.} |
| 158 |
% \begin{tabularx}{\linewidth}{LX@{\qquad}lR} |
| 159 |
% & & \multicolumn{1}{c}{Due date} \\ \cline{3-3} |
| 160 |
% \nextnum & Clean desk. & 2005/01/10 \\ |
| 161 |
% \nextnum & Sort ``in'' pile. & 2005/01/11 \\ |
| 162 |
% \nextnum & Discard random applications from ``in'' pile. & 2005/01/11 \\ |
| 163 |
% \nextnum & Move applications from ``in'' pile to ``out'' pile, stamping |
| 164 |
% each one with a different official-looking stamp. |
| 165 |
% & 2005/01/15 \\ |
| 166 |
% \nextnum & Write and mail meaningless memos. & 2005/01/16 \\ |
| 167 |
% \nextnum & Update r\'esum\'e. & 2005/01/20 \\ |
| 168 |
% \end{tabularx} |
| 169 |
% \end{listliketab} |
| 170 |
% |
| 171 |
% \section{Usage} |
| 172 |
% |
| 173 |
% There are two steps involved in making list-like \texttt{tabulars}: |
| 174 |
% First, you store a list environment's parameters. And second, you |
| 175 |
% create a \texttt{tabular} using the stored parameters. The following |
| 176 |
% are the commands and environments needed to perform these operations. |
| 177 |
% |
| 178 |
% \begin{decl} |
| 179 |
% |\storestyleof| \marg{environment} |
| 180 |
% \end{decl} |
| 181 |
% |
| 182 |
% |\storestyleof| is the easier to use of the two commands that store a list's |
| 183 |
% formatting style. Merely pass this command the name of an existing list |
| 184 |
% environment---generally either \texttt{itemize} or \texttt{enumerate}---as |
| 185 |
% its \meta{environment} parameter. |\storestyleof| will then remember the |
| 186 |
% formatting of that list environment for later use in a \texttt{tabular}. |
| 187 |
% |
| 188 |
% \begin{decl} |
| 189 |
% |\storeliststyle| |
| 190 |
% \end{decl} |
| 191 |
% |
| 192 |
% Sometimes, you have a list environment that takes parameters. |
| 193 |
% |\storestyleof| has no mechanism for passing parameters to such an |
| 194 |
% environment. In this situation, you can manually create a list of the |
| 195 |
% appropriate type and call |\storeliststyle| from within that list. |
| 196 |
% For example: |
| 197 |
% |
| 198 |
% \begin{verbatim} |
| 199 |
% \begin{mylistenvironment}{something}{something else} |
| 200 |
% \item[] \storeliststyle{} |
| 201 |
% \end{mylistenvironment} |
| 202 |
% \end{verbatim} |
| 203 |
% \vspace*{-\baselineskip} |
| 204 |
% |
| 205 |
% Note that the above will probably leave some blank space in your document. |
| 206 |
% |\storestyleof|---which uses |\storeliststyle|, incidentally---gets around |
| 207 |
% that problem by building the list within a \texttt{minipage} within an |
| 208 |
% \texttt{lrbox}. As you can tell, |\storestyleof| is a lot more convenient |
| 209 |
% to use, when applicable. |
| 210 |
% |
| 211 |
% \begin{decl} |
| 212 |
% |\begin{listliketab}| \\ |
| 213 |
% \meta{tabular} \\ |
| 214 |
% |\end{listliketab}| |
| 215 |
% \end{decl} |
| 216 |
% |
| 217 |
% Once you've stored a list environment's style with |\storestyleof| or |
| 218 |
% |\storeliststyle|, you're ready to typeset list-like \texttt{tablular}s. |
| 219 |
% The \texttt{listliketab} environment adjusts the internal and external |
| 220 |
% spacing of a \texttt{tablular} to match that of the previously given list. |
| 221 |
% It also defines two new field types: |L| and |R|\@. |L| inserts spacing |
| 222 |
% corresponding to the list's left margin, a right-justified parbox of the |
| 223 |
% same size as the list's label field, and spacing to separate the label |
| 224 |
% from the remaining fields. |R| inserts spacing corresponding to the list's |
| 225 |
% right margin, and is more useful in \texttt{tabularx} environments than |
| 226 |
% in ordinary \texttt{tabular}s. |
| 227 |
% |
| 228 |
% Speaking of which, the \meta{tabular} you put inside \texttt{listliketab} |
| 229 |
% can be any environment that's compatible with the \texttt{array} package. |
| 230 |
% This includes \texttt{tabular}, \texttt{tabularx}, \texttt{longtable}, and |
| 231 |
% probably others, as well. Basically, \texttt{listliketab} needs to call |
| 232 |
% |\newcolumntype| to define the |L| and |R| fields. |
| 233 |
% |
| 234 |
% The styles stored by |\storestyleof| and |\storeliststyle| are valid |
| 235 |
% until the next call to one of those commands. Hence, any number of |
| 236 |
% \texttt{listliketab} environments can follow a single |\storestyleof| |
| 237 |
% or |\storeliststyle|. |
| 238 |
% |
| 239 |
% \section{Examples} |
| 240 |
% |
| 241 |
% Here's a simple bullet list: |
| 242 |
% |
| 243 |
% \begin{verbatim} |
| 244 |
% \storestyleof{itemize} |
| 245 |
% \begin{listliketab} |
| 246 |
% \begin{tabular}{Ll} |
| 247 |
% \textbullet & One \\ |
| 248 |
% \textbullet & Two \\ |
| 249 |
% \textbullet & Three \\ |
| 250 |
% \end{tabular} |
| 251 |
% \end{listliketab} |
| 252 |
% \end{verbatim} |
| 253 |
% \vspace*{-\baselineskip} |
| 254 |
% |
| 255 |
% \noindent |
| 256 |
% and its output: |
| 257 |
% |
| 258 |
% \storestyleof{itemize} |
| 259 |
% \begin{listliketab} |
| 260 |
% \begin{tabular}{Ll} |
| 261 |
% \textbullet & One \\ |
| 262 |
% \textbullet & Two \\ |
| 263 |
% \textbullet & Three \\ |
| 264 |
% \end{tabular} |
| 265 |
% \end{listliketab} |
| 266 |
% |
| 267 |
% \bigskip\noindent |
| 268 |
% Here's an enumerated list that contains multiple columns after the label: |
| 269 |
% |
| 270 |
% \begin{verbatim} |
| 271 |
% \storestyleof{enumerate} |
| 272 |
% \begin{listliketab} |
| 273 |
% \newcounter{tabenum}\setcounter{tabenum}{0} |
| 274 |
% \newcommand{\nextnum}{\addtocounter{tabenum}{1}\thetabenum.} |
| 275 |
% \begin{tabular}{L>{\bf}l@{~or~}>{\bf}l@{~or~}>{\bf}l} |
| 276 |
% \nextnum & Red & green & blue \\ |
| 277 |
% \nextnum & Short & stout & tall \\ |
| 278 |
% \nextnum & Happy & sad & confused \\ |
| 279 |
% \end{tabular} |
| 280 |
% \end{listliketab} |
| 281 |
% \end{verbatim} |
| 282 |
% \vspace*{-\baselineskip} |
| 283 |
% |
| 284 |
% \noindent |
| 285 |
% and what it produces: |
| 286 |
% |
| 287 |
% \storestyleof{enumerate} |
| 288 |
% \begin{listliketab} |
| 289 |
% \newcounter{tabenum}\setcounter{tabenum}{0} |
| 290 |
% \newcommand{\nextnum}{\addtocounter{tabenum}{1}\thetabenum.} |
| 291 |
% \begin{tabular}{L>{\bf}l@{~or~}>{\bf}l@{~or~}>{\bf}l} |
| 292 |
% \nextnum & Red & green & blue \\ |
| 293 |
% \nextnum & Short & stout & tall \\ |
| 294 |
% \nextnum & Happy & sad & confused \\ |
| 295 |
% \end{tabular} |
| 296 |
% \end{listliketab} |
| 297 |
% |
| 298 |
% \bigskip\noindent |
| 299 |
% And finally, here's an example using \texttt{tabularx}: |
| 300 |
% |
| 301 |
% \begin{verbatim} |
| 302 |
% \storestyleof{itemize} |
| 303 |
% \begin{listliketab} |
| 304 |
% \begin{tabularx}{0.5\linewidth}{% |
| 305 |
% LX@{\raisebox{-2pt}{\framebox(12,12){}}}R} |
| 306 |
% \textbullet & Milk \\ |
| 307 |
% \textbullet & Flour \\ |
| 308 |
% \textbullet & Sugar \\ |
| 309 |
% \textbullet & Butter \\ |
| 310 |
% \textbullet & Eggs \\ |
| 311 |
% \end{tabularx} |
| 312 |
% \end{listliketab} |
| 313 |
% \end{verbatim} |
| 314 |
% \vspace*{-\baselineskip} |
| 315 |
% |
| 316 |
% \noindent |
| 317 |
% and the generated list: |
| 318 |
% |
| 319 |
% \storestyleof{itemize} |
| 320 |
% \begin{listliketab} |
| 321 |
% \begin{tabularx}{0.5\linewidth}{% |
| 322 |
% LX@{\raisebox{-2pt}{\framebox(12,12){}}}R} |
| 323 |
% \textbullet & Milk \\ |
| 324 |
% \textbullet & Flour \\ |
| 325 |
% \textbullet & Sugar \\ |
| 326 |
% \textbullet & Butter \\ |
| 327 |
% \textbullet & Eggs \\ |
| 328 |
% \end{tabularx} |
| 329 |
% \end{listliketab} |
| 330 |
% |
| 331 |
% \StopEventually{^^A |
| 332 |
% \section{Future work} |
| 333 |
% |
| 334 |
% The \texttt{listliketab} environment is too inflexible in terms of |
| 335 |
% defining the |L| and |R| column types for the user's \texttt{tabular} |
| 336 |
% environments. First, the user should be able to choose what letters |
| 337 |
% to use, in case he has already assigned a meaning to |L| or |R|\@. |
| 338 |
% Second, |L| always formats the label as a right-justified parbox, |
| 339 |
% while there may be a case in which the user wants the label to be |
| 340 |
% formatted differently. |
| 341 |
% |
| 342 |
% The next limitation that should be addressed in a later version of |
| 343 |
% \texttt{listliketab} is that the user must manually insert |
| 344 |
% |\textbullet|s (when mimicking \texttt{itemize}) or numbers (when |
| 345 |
% mimicking \texttt{enumerate}) into the ``label'' field of his |
| 346 |
% \texttt{tabular}. It would be nice if the \texttt{listliketab} |
| 347 |
% environment could do this automatically. |
| 348 |
% |
| 349 |
% Finally, there is no support for nested lists. Those would probably |
| 350 |
% be tricky to mimic properly in a \texttt{tabular}, but could |
| 351 |
% occasionally be useful to have. |
| 352 |
% } |
| 353 |
% |
| 354 |
% |
| 355 |
% \section{Implementation} |
| 356 |
% |
| 357 |
% This section contains the complete source code for \texttt{listliketab}. |
| 358 |
% Most users will not get much out of it, but it should be of use to |
| 359 |
% those who need more precise documentation and those who want to extend |
| 360 |
% the \texttt{listliketab} package. |
| 361 |
% |
| 362 |
% \subsection{Required packages} |
| 363 |
% \label{sec:packages} |
| 364 |
% |
| 365 |
% \texttt{listliketab} requires that the following packages be loaded: |
| 366 |
% |
| 367 |
% \begin{macrocode} |
| 368 |
\RequirePackage{calc} |
| 369 |
\RequirePackage{array} |
| 370 |
% \end{macrocode} |
| 371 |
% |
| 372 |
% \subsection{List parameter storage} |
| 373 |
% |
| 374 |
% Once we're inside a list environment, we'll need some (global) locations |
| 375 |
% in which to store the local values of various list parameters. |
| 376 |
% |
| 377 |
% \begin{macro}{\llt@labelwidth} |
| 378 |
% \begin{macro}{\llt@labelsep} |
| 379 |
% \begin{macro}{\llt@topsep} |
| 380 |
% \begin{macro}{\llt@rightmargin} |
| 381 |
% These are the global equivalents of |\labelwidth|, |\labelsep|, |\topsep|, |
| 382 |
% and |\rightmargin|, respectively. They're stored by the |\storeliststyle| |
| 383 |
% command from within a list environment. |
| 384 |
% \begin{macrocode} |
| 385 |
\newlength{\llt@labelwidth} |
| 386 |
\newlength{\llt@labelsep} |
| 387 |
\newlength{\llt@topsep} |
| 388 |
\newlength{\llt@rightmargin} |
| 389 |
% \end{macrocode} |
| 390 |
% \end{macro} |
| 391 |
% \end{macro} |
| 392 |
% \end{macro} |
| 393 |
% \end{macro} |
| 394 |
% |
| 395 |
% \begin{macro}{\llt@tab@indent} |
| 396 |
% |\llt@tab@indent| is the indentation of the entire list. It |
| 397 |
% corresponds to the space to the left of the label or, more precisely, |
| 398 |
% |\leftmargin|-|\labelsep|-|\labelwidth|. |
| 399 |
% \begin{macrocode} |
| 400 |
\newlength{\llt@tab@indent} |
| 401 |
% \end{macrocode} |
| 402 |
% \end{macro} |
| 403 |
% |
| 404 |
% \begin{macro}{\llt@bot@sep} |
| 405 |
% |\llt@bot@sep| is the amount of space to add at the end of a list. |
| 406 |
% It is set to |\itemsep|+|\parsep| by |\storeliststyle|. |
| 407 |
% (I'm not actually positive this is the right amount of space to add, |
| 408 |
% but it looks okay to me.) |
| 409 |
% \begin{macrocode} |
| 410 |
\newlength{\llt@bot@sep} |
| 411 |
% \end{macrocode} |
| 412 |
% \end{macro} |
| 413 |
% |
| 414 |
% \subsection{Other variables} |
| 415 |
% |
| 416 |
% \begin{macro}{\llt@arraystretch} |
| 417 |
% \begin{macro}{\llt@arraystretch@clean} |
| 418 |
% |\llt@arraystretch| is the value we need to assign to |\arraystretch| to |
| 419 |
% make \texttt{tabular} spacing mimic the spacing used in the given list. |
| 420 |
% |\llt@arraystretch@clean| is the same as |\llt@arraystretch|, except it |
| 421 |
% is ordinary text instead of a length and does not end in ``|pt|''. |
| 422 |
% \begin{macrocode} |
| 423 |
\newlength{\llt@arraystretch} |
| 424 |
\def\llt@arraystretch@clean{} |
| 425 |
% \end{macrocode} |
| 426 |
% \end{macro} |
| 427 |
% \end{macro} |
| 428 |
% |
| 429 |
% \begin{macro}{\llt@list@box} |
| 430 |
% This box is used by |\storestyleof| to hold a throwaway list. |
| 431 |
% \begin{macrocode} |
| 432 |
\newsavebox{\llt@list@box} |
| 433 |
% \end{macrocode} |
| 434 |
% \end{macro} |
| 435 |
% |
| 436 |
% \subsection{Author commands and environments} |
| 437 |
% |
| 438 |
% \begin{macro}{\storeliststyle} |
| 439 |
% When |\storeliststyle| is invoked within a list environment, it does |
| 440 |
% two things. First, it copies the current settings of various list |
| 441 |
% parameters into global variables, so they can be used outside the list. |
| 442 |
% And second, it calculates a value for |\arraystretch| to match the list's |
| 443 |
% inter-item spacing. |
| 444 |
% \begin{macrocode} |
| 445 |
\DeclareRobustCommand{\storeliststyle}{ |
| 446 |
% \end{macrocode} |
| 447 |
% Storing list parameters is fairly straightforward. |
| 448 |
% \begin{macrocode} |
| 449 |
\setlength{\llt@tab@indent}{\leftmargin-\labelsep-\labelwidth} |
| 450 |
\global\llt@tab@indent=\llt@tab@indent |
| 451 |
\setlength{\llt@bot@sep}{\itemsep+\parsep} |
| 452 |
\global\llt@bot@sep=\llt@bot@sep |
| 453 |
|
| 454 |
\global\llt@labelwidth=\labelwidth |
| 455 |
\global\llt@labelsep=\labelsep |
| 456 |
\global\llt@rightmargin=\rightmargin |
| 457 |
\global\llt@topsep=\topsep |
| 458 |
% \end{macrocode} |
| 459 |
% Determining an appropriate value for |\arraystretch| takes a bit of |
| 460 |
% explanation. Rows of a \texttt{tabular} environment normally have the |
| 461 |
% same height and depth as a strut. Entries in a list are also one strut |
| 462 |
% high/deep, but are separated by |\itemsep|+|\parsep|'s worth of glue. |
| 463 |
% Hence, to get the new value of |\arraystretch|, we have to take: |
| 464 |
% \newcommand{\strutfunc}[1]{\text{#1}(\text{strut})} |
| 465 |
% \begin{eqnarray*} |
| 466 |
% |\arraystretch| & = & \frac{\text{total space between baselines in a |
| 467 |
% list}}% |
| 468 |
% {\text{total space between baselines in a |
| 469 |
% \texttt{tabular}}} \\[2ex] |
| 470 |
% & = & \frac{\text{item height + item depth + |
| 471 |
% inter-item spacing}}% |
| 472 |
% {\text{row height + row depth}} \\[2ex] |
| 473 |
% & = & \frac{\strutfunc{height} + \strutfunc{depth} + |
| 474 |
% \texttt{\bslash itemsep} + |
| 475 |
% \texttt{\bslash parsep}}% |
| 476 |
% {\strutfunc{height} + \strutfunc{depth}} |
| 477 |
% \end{eqnarray*} |
| 478 |
% \begin{macrocode} |
| 479 |
\setlength{\llt@arraystretch}{% |
| 480 |
1.0pt*\ratio{\ht\strutbox+\dp\strutbox+\itemsep+\parsep} |
| 481 |
{\ht\strutbox+\dp\strutbox}} |
| 482 |
% \end{macrocode} |
| 483 |
% |\arraystretch| takes a unitless fixed-point number as an argument. |
| 484 |
% Unfortunately, \TeX\ doesn't support such a thing. So we use |
| 485 |
% \LaTeXe's |\strip@pt| macro to convert from a length to the equivalent |
| 486 |
% text, dropping the units in the process. |
| 487 |
% ^^A |
| 488 |
% \makeatletter |
| 489 |
% \changes{v1.0a}{2005/01/09}{Modified to use \string\LaTeXe's |
| 490 |
% \string\texttt\string{\string\string\string\strip@pt\string} macro |
| 491 |
% instead of defining the equivalent ourselves.} |
| 492 |
% \makeatother |
| 493 |
% \begin{macrocode} |
| 494 |
\xdef\llt@arraystretch@clean{\strip@pt\llt@arraystretch}% |
| 495 |
} |
| 496 |
% \end{macrocode} |
| 497 |
% \end{macro} |
| 498 |
% |
| 499 |
% \begin{macro}{\storestyleof} |
| 500 |
% The problem with |\storeliststyle| is that it can be called only from |
| 501 |
% within a list. What if you don't have a list to use as a template? Well, |
| 502 |
% you have to make one. Unfortunately, that list then winds up in your |
| 503 |
% document. |\storestyleof| to the rescue! This convenience function creates |
| 504 |
% a list of type |#1| (probably either \texttt{itemize} or \texttt{enumerate}) |
| 505 |
% containing a call to |\storeliststyle|, but then discards the list |
| 506 |
% environment, so you never see it. (More accurately, |\storelist| |
| 507 |
% constructs the list within an \texttt{lrbox} that it never typesets.) |
| 508 |
% \begin{macrocode} |
| 509 |
\DeclareRobustCommand{\storestyleof}[1]{% |
| 510 |
\begin{lrbox}{\llt@list@box} |
| 511 |
\noindent |
| 512 |
\begin{minipage}{\linewidth} |
| 513 |
\begin{#1} |
| 514 |
\item[] \storeliststyle{} |
| 515 |
\end{#1} |
| 516 |
\end{minipage} |
| 517 |
\end{lrbox}\ignorespacesafterend |
| 518 |
} |
| 519 |
% \end{macrocode} |
| 520 |
% \end{macro} |
| 521 |
% |
| 522 |
% \begin{environment}{listliketab} |
| 523 |
% The \texttt{listliketab} environment defines a new \texttt{tabular} |
| 524 |
% column type, |L|, which corresponds to the list's indentation, the label |
| 525 |
% (a right justified parbox), and the separation between the label and the |
| 526 |
% list body. |L| should be the first field in the user's \texttt{tabular} |
| 527 |
% environment. Similarly, \text{listliketab} defines |R|, which is the |
| 528 |
% spacing on the right side of the list. |R| is useful when the user is |
| 529 |
% using \texttt{tabularx} instead of \texttt{tabular}. In that case, a good |
| 530 |
% \texttt{tabularx} format string is ``|LXR|'', possibly with other fields |
| 531 |
% between the |X| and the |R|. |
| 532 |
% |
| 533 |
% \texttt{listliketab} also stretches the array appropriately and suppresses |
| 534 |
% paragraph indentation. (The |L| field will ensure the \texttt{tabular} is |
| 535 |
% properly indented.) |
| 536 |
% \begin{macrocode} |
| 537 |
\newenvironment{listliketab}{% |
| 538 |
\newcolumntype{L}{% |
| 539 |
@{\hspace*{\llt@tab@indent}}% |
| 540 |
>{\hfill}p{\llt@labelwidth}% |
| 541 |
@{\hspace*{\llt@labelsep}}}% |
| 542 |
\newcolumntype{R}{% |
| 543 |
@{\hspace*{\llt@rightmargin}}}% |
| 544 |
\renewcommand{\arraystretch}{\llt@arraystretch@clean}% |
| 545 |
\vspace{\llt@topsep}% |
| 546 |
\noindent\ignorespaces |
| 547 |
}{% |
| 548 |
\vspace{\llt@bot@sep}% |
| 549 |
} |
| 550 |
% \end{macrocode} |
| 551 |
% \end{environment} |
| 552 |
% |
| 553 |
% |
| 554 |
% \Finale |
| 555 |
\endinput |