| 1 |
% \iffalse meta-comment |
| 2 |
% |
| 3 |
% |
| 4 |
% (c) 1998 Jürgen Schlegelmilch <[email protected]> |
| 5 |
% (c) 2000 Walter Schmidt <[email protected]> |
| 6 |
% (c) 2002-2004 Rolf Niepraschk <[email protected]> and |
| 7 |
% Hubert Gäßlein |
| 8 |
% (c) 2012-2024 Rolf Niepraschk <[email protected]> |
| 9 |
% |
| 10 |
% This file may be distributed and/or modified under the |
| 11 |
% conditions of the LaTeX Project Public License, either version 1.3 |
| 12 |
% of this license or (at your option) any later version. |
| 13 |
% The latest version of this license is in: |
| 14 |
% |
| 15 |
% http://www.latex-project.org/lppl.txt |
| 16 |
% |
| 17 |
% and version 1.3 or later is part of all distributions of LaTeX |
| 18 |
% version 2003/12/01 or later. |
| 19 |
% |
| 20 |
% \fi |
| 21 |
% |
| 22 |
% \iffalse |
| 23 |
%<class>\ProvidesClass{leaflet} |
| 24 |
%<class> [2024/03/12 v2.1c LaTeX document class (JS,WaS,RN,HjG)] |
| 25 |
% |
| 26 |
%<*driver|manual> |
| 27 |
%<driver>\def\filename{leaflet.dtx} |
| 28 |
%<manual>\def\filename{leaflet-manual.tex} |
| 29 |
\def\fileversion{v2.1c} % change this when leaflet-manual changed, too. |
| 30 |
\def\filedate{2024/03/12} |
| 31 |
\def\docdate {2024/03/12} % change this when leaflet-manual changed, too. |
| 32 |
%</driver|manual> |
| 33 |
%<*driver> |
| 34 |
\listfiles |
| 35 |
\errorcontextlines5 |
| 36 |
\documentclass[a4paper]{ltxdoc} |
| 37 |
\IfFileExists{geometry.sty}{% |
| 38 |
\usepackage[left=\marginparwidth,textwidth=1.15\textwidth,% |
| 39 |
top=20mm,bottom=30mm]{geometry}}{} |
| 40 |
\IfFileExists{url.sty}{\usepackage{url}} |
| 41 |
{\newcommand\url[1]{\texttt{#1}}} |
| 42 |
%\OnlyDescription |
| 43 |
%\AlsoImplementation |
| 44 |
\EnableCrossrefs |
| 45 |
\CodelineIndex |
| 46 |
\RecordChanges |
| 47 |
\setlength\emergencystretch{3em} |
| 48 |
\begin{document} |
| 49 |
\DocInput{leaflet.dtx} |
| 50 |
\end{document} |
| 51 |
%</driver> |
| 52 |
% \fi |
| 53 |
% |
| 54 |
% \CheckSum{1291} |
| 55 |
% |
| 56 |
% \CharacterTable |
| 57 |
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 58 |
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 59 |
% Digits \0\1\2\3\4\5\6\7\8\9 |
| 60 |
% Exclamation \! Double quote \" Hash (number) \# |
| 61 |
% Dollar \$ Percent \% Ampersand \& |
| 62 |
% Acute accent \' Left paren \( Right paren \) |
| 63 |
% Asterisk \* Plus \+ Comma \, |
| 64 |
% Minus \- Point \. Solidus \/ |
| 65 |
% Colon \: Semicolon \; Less than \< |
| 66 |
% Equals \= Greater than \> Question mark \? |
| 67 |
% Commercial at \@ Left bracket \[ Backslash \\ |
| 68 |
% Right bracket \] Circumflex \^ Underscore \_ |
| 69 |
% Grave accent \` Left brace \{ Vertical bar \| |
| 70 |
% Right brace \} Tilde \~} |
| 71 |
% |
| 72 |
% \changes{v0.8c}{2004/01/16}{Repacked as dtx file. (RN)} |
| 73 |
% \changes{v0.9d}{2004/05/29}{M-x delete-trailing-whitespace (HjG)} |
| 74 |
% \changes{v0.9d}{2004/05/29}{LPPL 1.3 (HjG)} |
| 75 |
% \changes{v0.9d}{2004/05/29}{More code documentation; some caveats. (HjG)} |
| 76 |
% \changes{v0.9e}{2004/06/11}{Add option `finish'. (RN/HjG)} |
| 77 |
% \changes{v0.9f}{2004/06/25}{Merge v0.9d and v0.9e (hastily). (HjG)} |
| 78 |
% \changes{v0.9g}{2004/06/25}{Rename option `finish' to `combine'. (RN/HjG)} |
| 79 |
% \changes{v1.0pre1}{2004/06/26}{Redefinition of \cmd{\immediate}, |
| 80 |
% \cmd{\write}, \cmd{\openout} and \cmd{\closeout}. (RN)} |
| 81 |
% \changes{v1.0pre2}{2004/06/26}{eTeX support. (RN)} |
| 82 |
% \changes{v1.0pre3}{2004/07/07}{Options `landscape' and `portait'. (RN)} |
| 83 |
% \changes{v1.0}{2004/08/06}{CTAN release. (RN/HjG)} |
| 84 |
% \changes{v1.0a}{2004/08/08}{Option `debug'. (RN)} |
| 85 |
% \changes{v1.0d}{2012/06/04}{Options `twopart/notwopart' suggested |
| 86 |
% by Luis Rivera. No more `final' in \cmd{\ExecuteOptions} suggested |
| 87 |
% by Axel Berger (RN)} |
| 88 |
% \changes{v2.0d}{2020/10/25}{Using UTF8 in the preamble for author names |
| 89 |
% to prevent unpacking issue. (RN)} |
| 90 |
% |
| 91 |
% \DoNotIndex{\newcommand,\renewcommand,\newenvironment,\renewenvironment} |
| 92 |
% \DoNotIndex{\providecommand,\def,\edef,\let,\gdef,\xdef,\global,\newtoks} |
| 93 |
% \DoNotIndex{\newif,\newsavebox} |
| 94 |
% \DoNotIndex{\RequirePackage,\DeclareOption,\ProcessOptions,\ExecuteOptions} |
| 95 |
% \DoNotIndex{\CurrentOption,\OptionNotUsed} |
| 96 |
% \DoNotIndex{\LoadClass,\ClassError,\ClassInfo,\ClassWarningNoLine} |
| 97 |
% \DoNotIndex{\documentclass,\usepackage,\document} |
| 98 |
% \DoNotIndex{\input,\InputIfFileExists,\IfFileExists,\listfiles} |
| 99 |
% \DoNotIndex{\@ifdefinable,\@ifundefined,\@percentchar,\@empty} |
| 100 |
% \DoNotIndex{\AtBeginDocument,\AtEndDocument,\AtEndOfPackage} |
| 101 |
% \DoNotIndex{\MessageBreak,\typeout,\begin,\end,\noindent} |
| 102 |
% \DoNotIndex{\wd,\dp,\ht,\par,\@gobble,\g@addto@macro} |
| 103 |
% \DoNotIndex{\z@,\z@skip,\p@,\@ne,\tw@,\thr@@,\@iv,\strip@pt,\@plus} |
| 104 |
% ^^A ,\@cclv |
| 105 |
% \DoNotIndex{\the,\if,\else,\or,\fi,\ifnum,\ifdim,\ifcase,\ifodd} |
| 106 |
% \DoNotIndex{\advance,\multiply,\divide} |
| 107 |
% \DoNotIndex{\addtolength,\setlength,\usebox,\setbox,\box,\hbox,\vbox,\hb@xt@} |
| 108 |
% \DoNotIndex{\usecounter,\setcounter,\undefined,\@undefined,\loop,\repeat} |
| 109 |
% \DoNotIndex{\vspace,\hspace,\vfill,\hfill,\put,\string} |
| 110 |
% \DoNotIndex{\csname,\endcsname,\begingroup,\endgroup,\@nameuse} |
| 111 |
% \DoNotIndex{\expandafter,\afterassignment,\aftergroup,\noexpand} |
| 112 |
% \DoNotIndex{\@tempdima,\@tempdimb,\@tempdimc,\@tempcnta,\@tempcntb} |
| 113 |
% \DoNotIndex{\@tempboxa,\@temptokena,\toks@,\mbox,\makebox} |
| 114 |
% \DoNotIndex{\reserved@a,\relax,\protect,\space,\@spaces} |
| 115 |
% \DoNotIndex{\romannumeral,\Roman,\section,\subsection,\tableofcontents} |
| 116 |
% \DoNotIndex{\if@tempswa,\@tempswatrue,\@tempswafalse,\if,\ifx,\@ifstar} |
| 117 |
% \DoNotIndex{\bfseries,\normalfont,\normalsize,\small,\large,\Huge} |
| 118 |
% \DoNotIndex{\parindent,\parskip,\parsep,\clearpage,\newpage,\thanks,\title} |
| 119 |
% |
| 120 |
% \DoNotIndex{\TEXT,\author,\maketitle} |
| 121 |
% |
| 122 |
% \title{The \textsf{leaflet} document class} |
| 123 |
% |
| 124 |
% \author{\makebox[.25\textwidth][r]{J\"urgen Schlegelmilch} \and |
| 125 |
% Hubert G\"a\ss{}lein \and |
| 126 |
% \makebox[.25\textwidth][l]{Rolf Niepraschk} \and |
| 127 |
% Walter Schmidt} |
| 128 |
% |
| 129 |
% \date{\filedate} |
| 130 |
% |
| 131 |
% \maketitle |
| 132 |
% |
| 133 |
% \tableofcontents |
| 134 |
% |
| 135 |
% \section{Usage} |
| 136 |
% Process the file |leaflet-manual.tex| with \LaTeX\ to see |
| 137 |
% details of usage and layout. |
| 138 |
% |
| 139 |
% \StopEventually{\PrintChanges\PrintIndex} |
| 140 |
% |
| 141 |
% |
| 142 |
% \section{Implementation} |
| 143 |
% |
| 144 |
% \begin{macrocode} |
| 145 |
%<*class> |
| 146 |
% \end{macrocode} |
| 147 |
% |
| 148 |
% \subsection{Test whether the LaTeX format is new enough} |
| 149 |
% We use the 'shipout/before' hook. |
| 150 |
% \begin{macrocode} |
| 151 |
\providecommand\IfFormatAtLeastTF{\@ifl@t@r\fmtversion} |
| 152 |
\IfFormatAtLeastTF{2020/10/01}{}{% |
| 153 |
\ClassError{leaflet}{% |
| 154 |
LaTeX version equal to or newer \MessageBreak |
| 155 |
than '2020/10/01' is required% |
| 156 |
}{% |
| 157 |
Renew your TeX installation.% |
| 158 |
}% |
| 159 |
} |
| 160 |
% \end{macrocode} |
| 161 |
% \subsection{Saving some internal macros\dots} |
| 162 |
% |
| 163 |
% \begin{macrocode} |
| 164 |
\let\LL@begindvi\@begindvi |
| 165 |
% \end{macrocode} |
| 166 |
% \subsection{Option processing} |
| 167 |
% |
| 168 |
% \changes{v1.0b}{2004/08/12}{New option |
| 169 |
% \texttt{nospecialtricks} for testing purposes. (RN)} |
| 170 |
% \changes{v2.0a}{2020/10/13}{The macro \cmd{\LenToUnit} is no longer |
| 171 |
% required. (RN)} |
| 172 |
% \begin{macrocode} |
| 173 |
\@ifundefined{iflandscape}{\newif\iflandscape}{}% |
| 174 |
\@ifundefined{iftumble}{\newif\iftumble}{}% |
| 175 |
\@ifundefined{iftwopart}{\newif\iftwopart}{}% |
| 176 |
\@ifundefined{iffoldcorr}{\newif\iffoldcorr}{}% |
| 177 |
\newlength\LL@tempdima |
| 178 |
\newcommand\LL@debug@info[1]{}% |
| 179 |
\DeclareOption{dvips}{\PassOptionsToPackage{\CurrentOption}{graphics}} |
| 180 |
\DeclareOption{pdftex}{\PassOptionsToPackage{\CurrentOption}{graphics}} |
| 181 |
\DeclareOption{vtex}{\PassOptionsToPackage{\CurrentOption}{graphics}} |
| 182 |
\DeclareOption{dvipdfm}{\PassOptionsToPackage{\CurrentOption}{graphics}} |
| 183 |
\DeclareOption{twoside}{\OptionNotUsed} |
| 184 |
\DeclareOption{twocolumn}{\OptionNotUsed} |
| 185 |
\DeclareOption{landscape}{\landscapetrue} |
| 186 |
\DeclareOption{portrait}{\landscapefalse} |
| 187 |
\DeclareOption{debug}{\let\LL@debug@info\typeout} |
| 188 |
\DeclareOption{twopart}{\twoparttrue} |
| 189 |
\DeclareOption{notwopart}{\twopartfalse} |
| 190 |
\DeclareOption{nospecialtricks}{% |
| 191 |
\AtEndOfClass{% |
| 192 |
\ifLL@combine |
| 193 |
\let\immediate\@@@immediate\let\write\@@@write |
| 194 |
\let\openout\@@@openout\let\closeout\@@@closeout |
| 195 |
\let\special\@@@special\let\@@@exec@outs\relax |
| 196 |
\fi}} |
| 197 |
% \end{macrocode} |
| 198 |
% \begin{macro}{\LL@setPaperSize} |
| 199 |
% Some paper sizes are not supported by the article class. |
| 200 |
% Hence this work-around. |
| 201 |
% These page dimensions \emph{must} be given in landscape orientation! |
| 202 |
% \begin{macrocode} |
| 203 |
\newcommand*\LL@setPaperSize{} |
| 204 |
\DeclareOption{a3paper}{\def\LL@setPaperSize{% |
| 205 |
\paperwidth=420mm\paperheight=297mm\relax}}% |
| 206 |
\@ifdefinable\ifLL@combine{\newif\ifLL@combine} |
| 207 |
\DeclareOption{combine}{\LL@combinetrue} |
| 208 |
\DeclareOption{nocombine}{\LL@combinefalse} |
| 209 |
% \end{macrocode} |
| 210 |
% \end{macro} |
| 211 |
% \begin{macro}{\LL@selectOutput} |
| 212 |
% \begin{macrocode} |
| 213 |
\newcommand*\LL@selectOutput{} |
| 214 |
\DeclareOption{frontside}{\def\LL@selectOutput#1#2{#1}} |
| 215 |
\DeclareOption{backside}{\def\LL@selectOutput#1#2{#2}} |
| 216 |
\DeclareOption{bothsides}{\def\LL@selectOutput#1#2{#1#2}} |
| 217 |
% \end{macrocode} |
| 218 |
% \end{macro} |
| 219 |
% \begin{macrocode} |
| 220 |
\DeclareOption{tumble}{\tumbletrue} |
| 221 |
\DeclareOption{notumble}{\tumblefalse} |
| 222 |
% \end{macrocode} |
| 223 |
% \begin{macro}{\LL@foldmark} |
| 224 |
% Drawing code for the fold mark. |
| 225 |
% (Will be called within a |picture| environment.) |
| 226 |
% \begin{macrocode} |
| 227 |
\newcommand*\LL@foldmark{} |
| 228 |
\DeclareOption{foldmark}{% |
| 229 |
\def\LL@foldmark{% |
| 230 |
\begingroup |
| 231 |
\linethickness{\foldmarkrule}% |
| 232 |
\@tempdima=\dimexpr\paperheight-\LL@tmargin |
| 233 |
\put(0,\@tempdima){% |
| 234 |
\line(0,-1){\foldmarklength}}% |
| 235 |
\endgroup}% |
| 236 |
} |
| 237 |
% \end{macrocode} |
| 238 |
% \changes{v1.0d}{2004/12/22}{Invalid code for option ``nofoldmark'' |
| 239 |
% changed. Thanks to Una Smith. (RN)} |
| 240 |
% \begin{macrocode} |
| 241 |
\DeclareOption{nofoldmark}{\def\LL@foldmark{}}% |
| 242 |
% \end{macrocode} |
| 243 |
% \end{macro} |
| 244 |
% \changes{v1.1a}{2015/12/27}{New options `foldcorr/nofoldcorr' suggested by |
| 245 |
% Walter Schmidt. (RN)} |
| 246 |
% \begin{macrocode} |
| 247 |
\DeclareOption{foldcorr}{\foldcorrtrue} |
| 248 |
\DeclareOption{nofoldcorr}{\foldcorrfalse} |
| 249 |
% \end{macrocode} |
| 250 |
% \begin{macrocode} |
| 251 |
\newcommand*\LL@toomanypages[2]{} |
| 252 |
\DeclareOption{draft}{\PassOptionsToClass{\CurrentOption}{article}% |
| 253 |
\AtEndOfClass{% |
| 254 |
\def\LL@toomanypages#1#2{% |
| 255 |
\ClassWarningNoLine{leaflet}{#1.\MessageBreak#2}}% |
| 256 |
}% |
| 257 |
} |
| 258 |
\DeclareOption{final}{\PassOptionsToClass{\CurrentOption}{article}% |
| 259 |
\AtEndOfClass{% |
| 260 |
\ifLL@combine |
| 261 |
\def\LL@toomanypages#1#2{% |
| 262 |
\ClassError{leaflet}{#1}{#2.}}% |
| 263 |
\else |
| 264 |
\def\LL@toomanypages#1#2{% |
| 265 |
\ClassWarningNoLine{leaflet}{#1.\MessageBreak#2}}% |
| 266 |
\fi |
| 267 |
}% |
| 268 |
} |
| 269 |
\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}} |
| 270 |
\PassOptionsToClass{landscape,a4paper}{article} |
| 271 |
\ExecuteOptions{tumble,foldmark,bothsides,combine,landscape,notwopart} |
| 272 |
\ProcessOptions\relax |
| 273 |
\ifLL@combine |
| 274 |
% \end{macrocode} |
| 275 |
% \begin{macro}{\LL@rotate@I} |
| 276 |
% \begin{macro}{\LL@rotate@II} |
| 277 |
% Rotates the output pages. |
| 278 |
% \begin{macrocode} |
| 279 |
\newcommand*\LL@rotate@I{}\newcommand*\LL@rotate@II{}% |
| 280 |
\iflandscape |
| 281 |
\def\LL@rotate@I#1{#1}% |
| 282 |
\iftumble |
| 283 |
\def\LL@rotate@II#1{\rotatebox[origin=c]{180}{#1}}% |
| 284 |
\else |
| 285 |
\def\LL@rotate@II#1{#1}% |
| 286 |
\fi |
| 287 |
\else |
| 288 |
\def\LL@rotate@I#1{\rotatebox[origin=c]{90}{#1}}% |
| 289 |
\iftumble |
| 290 |
\def\LL@rotate@II#1{\rotatebox[origin=c]{270}{#1}}% |
| 291 |
\else |
| 292 |
\def\LL@rotate@II#1{\rotatebox[origin=c]{90}{#1}}% |
| 293 |
\fi |
| 294 |
\fi |
| 295 |
% \end{macrocode} |
| 296 |
% \end{macro} |
| 297 |
% \end{macro} |
| 298 |
% \begin{macro}{\immediate} |
| 299 |
% \begin{macro}{\write} |
| 300 |
% \begin{macro}{\openout} |
| 301 |
% \begin{macro}{\closeout} |
| 302 |
% In the following we redefine the \TeX{} primitives \cmd{\immediate}, |
| 303 |
% \cmd{\write}, \cmd{\openout}, and \cmd{\closeout}. All of them not |
| 304 |
% ``immediate'' executed statements are added to the macro |
| 305 |
% \cmd{\@@@pending@outs} (comma list). So especially the \cmd{\write} |
| 306 |
% statements independent of \TeX's \cmd{\shipout} run at a convenient time. For |
| 307 |
% V\TeX\ we must keep in mind that \cmd{\immediate}\cmd{\special} exist. |
| 308 |
% \changes{v1.0b}{2004/08/12}{\cmd{\special} must be processed similar |
| 309 |
% to e.\,g. \cmd{\write} (V\TeX). (RN)} |
| 310 |
% \begin{macrocode} |
| 311 |
\def\@@@pending@outs{}\let\@@@immediate\immediate |
| 312 |
\let\@@@write\write \let\@@@special\special |
| 313 |
\let\@@@openout\openout \let\@@@closeout\closeout |
| 314 |
\def\immediate{% |
| 315 |
\let\write\immediate@write% |
| 316 |
\let\openout\immediate@openout% |
| 317 |
\let\closeout\immediate@closeout% |
| 318 |
\let\special\immediate@special}% |
| 319 |
\def\reset@immediate{% |
| 320 |
\let\write\pending@write% |
| 321 |
\let\openout\pending@openout% |
| 322 |
\let\closeout\pending@closeout% |
| 323 |
\let\special\@@@special}% |
| 324 |
\long\def\pending@write#1#{\pending@@write{#1}} |
| 325 |
\def\immediate@write{% |
| 326 |
\reset@immediate\@@@immediate\@@@write}% |
| 327 |
\def\immediate@openout{% |
| 328 |
\reset@immediate\@@@immediate\@@@openout}% |
| 329 |
\def\immediate@closeout{% |
| 330 |
\reset@immediate\@@@immediate\@@@closeout}% |
| 331 |
\def\immediate@special{% |
| 332 |
\reset@immediate\@@@immediate\@@@special}% |
| 333 |
\let\write\pending@write |
| 334 |
\let\openout\pending@openout |
| 335 |
\let\closeout\pending@closeout |
| 336 |
% \end{macrocode} |
| 337 |
% \begin{macro}{\@dummy@whatsit} |
| 338 |
% Makes our redefined primitives more like ``whatsits'' (???). |
| 339 |
% `\cmd{\special}|{}|' is also possible for pdf\TeX\ but we get a lot of |
| 340 |
% strange warnings (``|Non-PDF special ignored!|'') in this case. |
| 341 |
% \begin{macrocode} |
| 342 |
\def\@dummy@whatsit{\special{}} |
| 343 |
\begingroup\@ifundefined{pdfoutput}% |
| 344 |
{\endgroup} |
| 345 |
{\endgroup |
| 346 |
\ifnum\pdfoutput>\z@\def\@dummy@whatsit{\pdfliteral{}}\fi} |
| 347 |
% \end{macrocode} |
| 348 |
% \end{macro} |
| 349 |
% \begin{macrocode} |
| 350 |
\begingroup\expandafter\expandafter\expandafter\endgroup |
| 351 |
\expandafter\ifx\csname eTeXversion\endcsname\relax |
| 352 |
%%% Test is from Markus Kohm (d.c.t.t, 29 Jun 2004) |
| 353 |
\ClassWarningNoLine{leaflet}{% |
| 354 |
*************************************\MessageBreak |
| 355 |
* It's very recommended to use eTeX \MessageBreak |
| 356 |
* with this package! \MessageBreak |
| 357 |
*************************************}% |
| 358 |
% \end{macrocode} |
| 359 |
% \begin{macro}{\pending@@write} |
| 360 |
% Doesn't work correctly without any \cmd{\mark} or \cmd{\special} |
| 361 |
% or \cmd{\pdfliteral} command inside. |
| 362 |
% \begin{macrocode} |
| 363 |
\long\def\pending@@write#1#2{% |
| 364 |
\@dummy@whatsit |
| 365 |
\g@addto@macro\@@@pending@outs{\@@@immediate\@@@write\number#1{#2},}}% |
| 366 |
% \end{macrocode} |
| 367 |
% \end{macro} |
| 368 |
% \begin{macro}{\pending@openout} |
| 369 |
% \begin{macrocode} |
| 370 |
\def\pending@openout#1 {% |
| 371 |
\@dummy@whatsit |
| 372 |
\g@addto@macro\@@@pending@outs{\@@@immediate\@@@openout\number#1,}}% |
| 373 |
% \end{macrocode} |
| 374 |
% \end{macro} |
| 375 |
% \begin{macro}{\pending@closeout} |
| 376 |
% \begin{macrocode} |
| 377 |
\def\pending@closeout#1{% |
| 378 |
\@dummy@whatsit |
| 379 |
\g@addto@macro\@@@pending@outs{\@@@immediate\@@@closeout\number#1,}}% |
| 380 |
% \end{macrocode} |
| 381 |
% \end{macro} |
| 382 |
% \begin{macro}{\@@@exec@outs} |
| 383 |
% Note to this implementation: The out commands and the page breaks are not |
| 384 |
% allways in sync, which means possible wrong page references. |
| 385 |
% \begin{macrocode} |
| 386 |
\newcommand*\@@@exec@outs{% |
| 387 |
\@@@pending@outs\gdef\@@@pending@outs{}% |
| 388 |
\LL@debug@info{% |
| 389 |
>>> execute the output commands of the current page <<<}}% |
| 390 |
% \end{macrocode} |
| 391 |
% \end{macro} |
| 392 |
% \begin{macrocode} |
| 393 |
\else |
| 394 |
\RequirePackage{etex} |
| 395 |
% \end{macrocode} |
| 396 |
% Allocation of a new mark class. |
| 397 |
% \begin{macrocode} |
| 398 |
\globmarks\@@@out@mark |
| 399 |
\newcounter{@@total@outs}\setcounter{@@total@outs}{0} |
| 400 |
\newcounter{@@last@exec}\setcounter{@@last@exec}{0} |
| 401 |
% \end{macrocode} |
| 402 |
% \begin{macro}{\pending@@write} |
| 403 |
% Doesn't work correctly without any \cmd{\mark} or \cmd{\special} |
| 404 |
% or \cmd{\pdfliteral} command inside. |
| 405 |
% \begin{macrocode} |
| 406 |
\long\def\pending@@write#1#2{% |
| 407 |
\global\advance\c@@@total@outs\@ne% |
| 408 |
\marks\@@@out@mark{\the\c@@@total@outs}% |
| 409 |
\g@addto@macro\@@@pending@outs{\@@@immediate\@@@write\number#1{#2},}}% |
| 410 |
% \end{macrocode} |
| 411 |
% \end{macro} |
| 412 |
% \begin{macro}{\pending@openout} |
| 413 |
% \begin{macro}{\pending@@openout} |
| 414 |
% \begin{macro}{\pending@@@openout} |
| 415 |
% \begin{macro}{\@ifequalsign} |
| 416 |
% \begin{macrocode} |
| 417 |
\def\pending@openout#1 {% |
| 418 |
\global\advance\c@@@total@outs\@ne% |
| 419 |
\marks\@@@out@mark{\the\c@@@total@outs}% |
| 420 |
\g@addto@macro\@@@pending@outs{\@@@immediate\@@@openout\number#1,}}% |
| 421 |
% \end{macrocode} |
| 422 |
% \end{macro} |
| 423 |
% \end{macro} |
| 424 |
% \end{macro} |
| 425 |
% \end{macro} |
| 426 |
% \begin{macro}{\pending@closeout} |
| 427 |
% \begin{macrocode} |
| 428 |
\def\pending@closeout#1{% |
| 429 |
\global\advance\c@@@total@outs\@ne% |
| 430 |
\marks\@@@out@mark{\the\c@@@total@outs}% |
| 431 |
\g@addto@macro\@@@pending@outs{\@@@immediate\@@@closeout\number#1,}}% |
| 432 |
% \end{macrocode} |
| 433 |
% \end{macro} |
| 434 |
% \begin{macro}{\@@@exec@outs} |
| 435 |
% With the call of \cmd{\@@@exec@outs} we simulate \TeX's |
| 436 |
% execution of non-immediate output commands. The number of pending |
| 437 |
% commands which can be executed must be decremented by |
| 438 |
% $\cmd{\value}|{@@total@outs}| - \cmd{\botmarks}\cmd{\@@@out@mark}$. The |
| 439 |
% remaining commands must still wait until the next output page is |
| 440 |
% ready. It works only for output commands in the main text which moved to |
| 441 |
% the next page but not for floating output commands. |
| 442 |
% \changes{v2.0c}{2020/10/14}{Missing \cmd{\set@display@protect} (RN)} |
| 443 |
% \begin{macrocode} |
| 444 |
\newcommand*\@@@exec@outs{% |
| 445 |
\begingroup |
| 446 |
% \end{macrocode} |
| 447 |
% Pending io's $=\cmd{\@tempcntb} = \mbox{TOTAL-OUTS}\,-\,\mbox{LAST-EXEC}$ |
| 448 |
% \begin{macrocode} |
| 449 |
\@tempcntb\c@@@total@outs\advance\@tempcntb-\c@@@last@exec% |
| 450 |
\edef\reserved@a{\botmarks\@@@out@mark}% |
| 451 |
\ifx\reserved@a\@empty\@tempcnta\z@\else\@tempcnta\reserved@a\fi% |
| 452 |
\LL@debug@info{PENDING-OUTS:\the\@tempcntb\space\space |
| 453 |
TOTAL-OUTS:\the\c@@@total@outs\space\space |
| 454 |
LAST-EXEC:\the\c@@@last@exec\space\space |
| 455 |
TOPMARK:\topmarks\@@@out@mark\space\space |
| 456 |
FIRSTMARK:\firstmarks\@@@out@mark\space\space |
| 457 |
BOTMARK:\botmarks\@@@out@mark}% |
| 458 |
% \end{macrocode} |
| 459 |
% Last valid pending entry $ = \cmd{\@tempcntb} = |
| 460 |
% \mbox{PENDING-OUTS}\,-\,\mbox{TOTAL-OUTS}\,+\,\mbox{BOTMARK} $ |
| 461 |
% \par\noindent |
| 462 |
% Number of invalid (moved) out's $ = \cmd{\@tempcnta} = |
| 463 |
% \mbox{TOTAL-OUTS}\,-\,\mbox{BOTMARK} $ |
| 464 |
% \begin{macrocode} |
| 465 |
\advance\@tempcnta-\c@@@total@outs \advance\@tempcntb\@tempcnta |
| 466 |
\@tempcnta-\@tempcnta% |
| 467 |
\ifnum\@tempcnta>\z@ |
| 468 |
\LL@debug@info{% |
| 469 |
>>> resave \the\@tempcnta\space output command(s). |
| 470 |
Too early to execute! <<<}% |
| 471 |
\fi |
| 472 |
\@tempcnta\z@ \def\reserved@b{}% |
| 473 |
\set@display@protect |
| 474 |
\@for\reserved@a :=\@@@pending@outs\do{% |
| 475 |
\ifx\reserved@a\@empty\else |
| 476 |
\ifnum\@tempcnta<\@tempcntb% |
| 477 |
\reserved@a% execute output's related to the current page box. |
| 478 |
\global\advance\c@@@last@exec\@ne |
| 479 |
\LL@debug@info{>>> execute output command number |
| 480 |
\the\c@@@last@exec\space<<<}% |
| 481 |
\else |
| 482 |
% \end{macrocode} |
| 483 |
% Other output's must be resaved and still pending. |
| 484 |
% \begin{macrocode} |
| 485 |
\expandafter\g@addto@macro\expandafter\reserved@b\expandafter{% |
| 486 |
\reserved@a,}% |
| 487 |
\fi |
| 488 |
\advance\@tempcnta\@ne% |
| 489 |
\fi}% |
| 490 |
\expandafter\@temptokena\expandafter{\reserved@b}% |
| 491 |
\xdef\@@@pending@outs{\the\@temptokena}% |
| 492 |
\endgroup}% |
| 493 |
% \end{macrocode} |
| 494 |
% \end{macro} |
| 495 |
% \begin{macrocode} |
| 496 |
\fi% end of eTeX test. |
| 497 |
% \end{macrocode} |
| 498 |
% \end{macro} |
| 499 |
% \end{macro} |
| 500 |
% \end{macro} |
| 501 |
% \end{macro} |
| 502 |
% \begin{macro}{\protected@write} |
| 503 |
% Because our redefined \cmd{\write} is expandable we must protect |
| 504 |
% it inside of \LaTeX's \cmd{\protected@write}. |
| 505 |
% \begin{macrocode} |
| 506 |
\long\def\protected@write#1#2#3{% |
| 507 |
\begingroup |
| 508 |
\let\thepage\relax |
| 509 |
#2% |
| 510 |
\let\protect\@unexpandable@protect |
| 511 |
\edef\reserved@a{\noexpand\write#1{#3}}% |
| 512 |
\reserved@a% |
| 513 |
\endgroup |
| 514 |
\if@nobreak\ifvmode\nobreak\fi\fi}% |
| 515 |
% \end{macrocode} |
| 516 |
% \end{macro} |
| 517 |
% \begin{macro}{\@begindvi} |
| 518 |
% Delay \cmd{\@begindvi} to be executed until the real page output. |
| 519 |
% \begin{macrocode} |
| 520 |
\let\@begindvi\@empty |
| 521 |
\fi% end of \ifLL@combine |
| 522 |
% \end{macrocode} |
| 523 |
% \end{macro} |
| 524 |
% \begin{macro}{\LL@toomanypages} |
| 525 |
% Now elsewhere \dots |
| 526 |
% \end{macro} |
| 527 |
% \changes{v1.1a}{2015/12/27}{Using \cmd{\dimexpr} instead of |
| 528 |
% package `calc'.(RN)} |
| 529 |
% \begin{macrocode} |
| 530 |
\LoadClass{article} |
| 531 |
\RequirePackage{graphicx} |
| 532 |
% \end{macrocode} |
| 533 |
% \begin{macro}{\LL@pagesize@specials} |
| 534 |
% Now the graphics driver is known. |
| 535 |
% We will check the graphics driver and set special code for page |
| 536 |
% dimensions and other. |
| 537 |
% \changes{v1.0e}{2013/11/06}{Patch from Toby Thurston for XeLaTeX. (RN)} |
| 538 |
% \changes{v1.1b}{2017/03/17}{Adding code for LuaTeX \textgreater 0.85. |
| 539 |
% Thanks to Knut Lickert for his bug report. (RN)} |
| 540 |
% \begin{macrocode} |
| 541 |
\newcommand*\LL@pagesize@specials[2]{} |
| 542 |
\@ifundefined{Gin@driver}{}{% |
| 543 |
\ifx\Gin@driver\@empty\else% |
| 544 |
\filename@parse{\Gin@driver}\@tempswafalse% |
| 545 |
\def\reserved@a{dvips}% |
| 546 |
\ifx\filename@base\reserved@a\@tempswatrue\fi% |
| 547 |
\def\reserved@a{dvipdfm}% |
| 548 |
\ifx\filename@base\reserved@a\@tempswatrue\fi% |
| 549 |
\if@tempswa |
| 550 |
\ClassInfo{leaflet}{Generating code for dvips}% |
| 551 |
\def\LL@pagesize@specials#1#2{% |
| 552 |
\@tempdima=#1\@tempdimb=#2 % |
| 553 |
\AtBeginDvi{\special{papersize=\the\@tempdima,\the\@tempdimb}}}% |
| 554 |
\fi |
| 555 |
\def\reserved@a{pdftex}% |
| 556 |
\ifx\filename@base\reserved@a |
| 557 |
\ClassInfo{leaflet}{Generating code for pdfTeX}% |
| 558 |
\def\LL@pagesize@specials#1#2{% |
| 559 |
\@tempdima=#1\@tempdimb=#2 % |
| 560 |
\pdfpagewidth\@tempdima\pdfpageheight\@tempdimb}% |
| 561 |
\fi |
| 562 |
\def\reserved@a{luatex}% |
| 563 |
\ifx\filename@base\reserved@a |
| 564 |
\ClassInfo{leaflet}{Generating code for LuaTeX}% |
| 565 |
\ifx\pdfpagewidth\@undefined |
| 566 |
\def\LL@pagesize@specials#1#2{% |
| 567 |
\@tempdima=#1\@tempdimb=#2 % |
| 568 |
\pagewidth\@tempdima\pageheight\@tempdimb}% |
| 569 |
\else |
| 570 |
\def\LL@pagesize@specials#1#2{% |
| 571 |
\@tempdima=#1\@tempdimb=#2 % |
| 572 |
\pdfpagewidth\@tempdima\pdfpageheight\@tempdimb}% |
| 573 |
\fi |
| 574 |
\fi |
| 575 |
\def\reserved@a{xetex}% |
| 576 |
\ifx\filename@base\reserved@a |
| 577 |
\ClassInfo{leaflet}{Generating code for XeTeX}% |
| 578 |
\def\LL@pagesize@specials#1#2{% |
| 579 |
\@tempdima=#1\@tempdimb=#2% |
| 580 |
\pdfpagewidth\@tempdima\pdfpageheight\@tempdimb}% |
| 581 |
\fi |
| 582 |
\def\reserved@a{vtex}% |
| 583 |
\ifx\filename@base\reserved@a |
| 584 |
\ClassInfo{leaflet}{Generating code for VTeX}% |
| 585 |
\def\LL@pagesize@specials#1#2{% |
| 586 |
\@tempdima=#1\@tempdimb=#2% |
| 587 |
\mediawidth\@tempdima\mediaheight\@tempdimb}% |
| 588 |
\fi |
| 589 |
\fi |
| 590 |
} |
| 591 |
% \end{macrocode} |
| 592 |
% \end{macro} |
| 593 |
% |
| 594 |
% \begin{macro}{\LL@CmdIgnored} |
| 595 |
% \begin{macrocode} |
| 596 |
\newcommand*\LL@CmdIgnored[1]{% |
| 597 |
\ClassWarning{leaflet}{% |
| 598 |
`\string#1' ignored}} |
| 599 |
% \end{macrocode} |
| 600 |
% \end{macro} |
| 601 |
% \subsection{Changing the class properties} |
| 602 |
% \begin{macrocode} |
| 603 |
\setlength{\parskip}{1ex plus 2pt} |
| 604 |
\@listi% |
| 605 |
\setlength{\labelwidth}{\leftmargin} |
| 606 |
\addtolength{\labelwidth}{-\labelsep} |
| 607 |
\pagestyle{empty} |
| 608 |
\AddToHook{cmd/maketitle/after}{\thispagestyle{empty}}% |
| 609 |
\headheight\z@ |
| 610 |
\headsep\z@ |
| 611 |
\footskip\z@ |
| 612 |
\marginparwidth\z@ |
| 613 |
\marginparsep\z@ |
| 614 |
\sloppy |
| 615 |
\setcounter{secnumdepth}{0} |
| 616 |
%\renewcommand\marginpar[2][]{\LL@CmdIgnored{\marginpar}} |
| 617 |
\renewcommand\twocolumn[1][]{\LL@CmdIgnored{\twocolumn}} |
| 618 |
\renewcommand\onecolumn{\LL@CmdIgnored{\onecolumn}} |
| 619 |
\renewcommand\topfraction{0.7} |
| 620 |
\renewcommand\bottomfraction{0.7} |
| 621 |
\setlength{\textfloatsep}{10pt plus 4pt minus 3pt} |
| 622 |
\setlength{\parindent}{\z@} |
| 623 |
\setlength{\leftmargini}{1.5em} |
| 624 |
\setlength{\leftmarginii}{1.5em} |
| 625 |
\setlength{\leftmarginiii}{1.5em} |
| 626 |
\setlength{\leftmarginiv}{1.5em} |
| 627 |
\setlength{\leftmarginv}{1.5em} |
| 628 |
\setlength{\leftmarginvi}{1.5em} |
| 629 |
\setlength{\labelsep}{.5em} |
| 630 |
\setlength \labelwidth{\leftmargini} |
| 631 |
\addtolength\labelwidth{-\labelsep} |
| 632 |
% \end{macrocode} |
| 633 |
% \begin{macro}{\noparskip} |
| 634 |
% \begin{macrocode} |
| 635 |
\def\noparskip{\par\vspace{-\parskip}} |
| 636 |
% \end{macrocode} |
| 637 |
% \end{macro} |
| 638 |
% Modification of list and section parameters for a more compact layout. |
| 639 |
% \begin{macrocode} |
| 640 |
\let\old@small\small |
| 641 |
\renewcommand{\small}{\old@small\let\@listi\@listI} |
| 642 |
\let\old@footnotesize\footnotesize |
| 643 |
\renewcommand{\footnotesize}{\old@footnotesize\let\@listi\@listI} |
| 644 |
% \end{macrocode} |
| 645 |
% \begin{macro}{\sectfont} |
| 646 |
% User macro for changing the font of the typesetted parameter of |
| 647 |
% the \cmd{\?section} commands. |
| 648 |
% \begin{macrocode} |
| 649 |
\newcommand{\sectfont}{\bfseries} |
| 650 |
% \end{macrocode} |
| 651 |
% \end{macro} |
| 652 |
% \begin{macrocode} |
| 653 |
\renewcommand\section{\@startsection{section}{1}{\z@}% |
| 654 |
{-3.5ex \@plus -.75ex}% |
| 655 |
{1ex} %{1.5ex}% |
| 656 |
{\normalfont\large\sectfont}} |
| 657 |
\renewcommand\subsection{\@startsection{subsection}{2}{\z@}% |
| 658 |
{-2.5ex plus -.5ex}% |
| 659 |
{1\p@} %{1ex}% |
| 660 |
{\normalfont\normalsize\sectfont}} |
| 661 |
\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}% |
| 662 |
{-2.5ex plus -.5ex}% |
| 663 |
{-1em}% |
| 664 |
{\normalfont\normalsize\sectfont}} |
| 665 |
\def\part{\LL@CmdIgnored{\part}\secdef\@part\@spart} |
| 666 |
\def\@part[#1]#2{} |
| 667 |
\def\@spart#1{} |
| 668 |
|
| 669 |
\renewcommand*\descriptionlabel[1]{% |
| 670 |
\hspace\labelsep\normalfont\descfont #1} |
| 671 |
% \end{macrocode} |
| 672 |
% \begin{macro}{\descfont} |
| 673 |
% User macro for changing the font of the description label. |
| 674 |
% \begin{macrocode} |
| 675 |
\newcommand*\descfont{\bfseries} |
| 676 |
% \end{macrocode} |
| 677 |
% \end{macro} |
| 678 |
% \begin{macrocode} |
| 679 |
\iffalse |
| 680 |
% Doesn't work! |
| 681 |
\g@addto@macro\enumerate{\parsep2\p@\@plus2\p@\@minus\z@} |
| 682 |
\g@addto@macro\itemize{\parsep2\p@\@plus2\p@\@minus\z@} |
| 683 |
\g@addto@macro\description{\parsep2\p@\@plus2\p@\@minus\z@} |
| 684 |
\else |
| 685 |
\newcommand*\LL@listsetup{% |
| 686 |
% \parsep.445ex\@plus.445ex\@minus.2225ex% |
| 687 |
% \parsep.5ex\@plus.5ex\@minus.25ex% |
| 688 |
\parsep1ex\@plus.5ex\@minus.25ex% |
| 689 |
\LL@debug@info{***parsep=\the\parsep}% |
| 690 |
% \itemsep.25\parsep |
| 691 |
\itemsep\z@ |
| 692 |
\LL@debug@info{***itemsep=\the\itemsep}% |
| 693 |
\topsep\z@ |
| 694 |
\LL@debug@info{***topsep=\the\topsep}% |
| 695 |
% \partopsep\z@ |
| 696 |
\LL@debug@info{***partopsep=\the\partopsep}% |
| 697 |
} |
| 698 |
\def\enumerate{% |
| 699 |
\ifnum \@enumdepth >\thr@@\@toodeep\else |
| 700 |
\advance\@enumdepth\@ne |
| 701 |
\edef\@enumctr{enum\romannumeral\the\@enumdepth}% |
| 702 |
\expandafter |
| 703 |
\list |
| 704 |
\csname label\@enumctr\endcsname |
| 705 |
{\usecounter\@enumctr |
| 706 |
\def\makelabel##1{\hss\llap{##1}}% |
| 707 |
%\def\makelabel##1{##1\hfill}% |
| 708 |
%\def\makelabel##1{\hss##1}% |
| 709 |
\LL@listsetup |
| 710 |
}% |
| 711 |
\fi} |
| 712 |
\def\itemize{% |
| 713 |
\ifnum \@itemdepth >\thr@@\@toodeep\else |
| 714 |
\advance\@itemdepth\@ne |
| 715 |
\edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% |
| 716 |
\expandafter |
| 717 |
\list |
| 718 |
\csname\@itemitem\endcsname |
| 719 |
{% |
| 720 |
\def\makelabel##1{\hss\llap{##1}}% |
| 721 |
%\def\makelabel##1{##1\hfill}% |
| 722 |
%\def\makelabel##1{\hss##1}% |
| 723 |
\LL@listsetup |
| 724 |
}% |
| 725 |
\fi} |
| 726 |
\renewenvironment{description} |
| 727 |
{\list{}{\labelwidth\z@ \itemindent-\leftmargin |
| 728 |
\let\makelabel\descriptionlabel |
| 729 |
\LL@listsetup}} |
| 730 |
{\endlist} |
| 731 |
\fi |
| 732 |
% \end{macrocode} |
| 733 |
% |
| 734 |
% \subsection{Changing the page dimensions} |
| 735 |
% |
| 736 |
% \begin{macro}{\setmargins} |
| 737 |
% User command to specify the margins. (o, u, l, r) |
| 738 |
% |
| 739 |
% |\setmargins|\marg{top}\marg{bottom}\marg{left}\marg{right} |
| 740 |
% |
| 741 |
% The new user interface! |
| 742 |
% By default, the \textsf{leaflet} class does not use headings, |
| 743 |
% footings and marginal notes. |
| 744 |
% If the user desires, these can be restored by setting the respective |
| 745 |
% lengths \emph{before} calling |\setmargins|. |
| 746 |
% Setting the margins should \emph{always} be done using |\setmargins|; |
| 747 |
% if the user assigns to any of the length registers |\topmargin|, |
| 748 |
% |\evensidemargin|, |\oddsidemargin| using |\setlength|, chaos will |
| 749 |
% happen. |
| 750 |
% |
| 751 |
% \begin{macrocode} |
| 752 |
\newcommand*\setmargins[4]{% |
| 753 |
% \end{macrocode} |
| 754 |
% temp. top! |
| 755 |
% \begin{macrocode} |
| 756 |
\setlength\topmargin{#1}% |
| 757 |
\edef\LL@tmargin{\the\topmargin}% |
| 758 |
% \end{macrocode} |
| 759 |
% temp. bottom! |
| 760 |
% \begin{macrocode} |
| 761 |
\setlength\evensidemargin{#2}% |
| 762 |
\textheight=\dimexpr\paperheight |
| 763 |
-\topmargin-\evensidemargin-\headheight-\headsep-\footskip |
| 764 |
% \end{macrocode} |
| 765 |
% temp. left! |
| 766 |
% \begin{macrocode} |
| 767 |
\setlength\oddsidemargin{#3}% |
| 768 |
% \end{macrocode} |
| 769 |
% temp. right! |
| 770 |
% \begin{macrocode} |
| 771 |
\setlength\evensidemargin{#4}% |
| 772 |
\textwidth=\dimexpr\paperwidth |
| 773 |
-\oddsidemargin-\evensidemargin-\marginparwidth-\marginparsep |
| 774 |
% \end{macrocode} |
| 775 |
% real top! |
| 776 |
% \begin{macrocode} |
| 777 |
\addtolength\topmargin{-1in}% |
| 778 |
% \end{macrocode} |
| 779 |
% real left! |
| 780 |
% \begin{macrocode} |
| 781 |
\addtolength\oddsidemargin{-1in}% |
| 782 |
% \end{macrocode} |
| 783 |
% probably not necessary |
| 784 |
% \begin{macrocode} |
| 785 |
\evensidemargin\oddsidemargin |
| 786 |
} |
| 787 |
% \end{macrocode} |
| 788 |
% \end{macro} |
| 789 |
% The dimensions of a single small page. |
| 790 |
% \begin{macrocode} |
| 791 |
\LL@setPaperSize |
| 792 |
\paperwidth=0.333333334\paperwidth |
| 793 |
\setmargins{11mm}{11mm}{8mm}{8mm} |
| 794 |
% \end{macrocode} |
| 795 |
% |
| 796 |
% \subsection{Additional user macros} |
| 797 |
% |
| 798 |
% \begin{macro}{\foldmarkrule} |
| 799 |
% \begin{macro}{\foldmarklength} |
| 800 |
% The dimension of the foldmark between page~2 and page~3. |
| 801 |
% \begin{macrocode} |
| 802 |
\newcommand*\foldmarkrule{0.4pt} |
| 803 |
\newcommand*\foldmarklength{2mm} |
| 804 |
% \end{macrocode} |
| 805 |
% \end{macro} |
| 806 |
% \end{macro} |
| 807 |
% \begin{macro}{\AddToBackground} |
| 808 |
% \begin{macro}{\AddToBackground*} |
| 809 |
% Adds the given parameter~|#2| (some picture commands) to a |
| 810 |
% macro which will be used inside a zero-dimensional picture environment |
| 811 |
% located at the lower left corner of a page. Parameter~|#1| |
| 812 |
% selects the page number. The star version adds the picture commands to the |
| 813 |
% background of one of the combined large pages instead of one of the small |
| 814 |
% pages. |
| 815 |
% \begin{macrocode} |
| 816 |
\newcommand\AddToBackground{% |
| 817 |
\@ifstar{\@tempswatrue\LL@AddToBackground} |
| 818 |
{\@tempswafalse\LL@AddToBackground}} |
| 819 |
\@onlypreamble\AddToBackground |
| 820 |
\newcommand\LL@AddToBackground[2]{% |
| 821 |
\if@tempswa\def\@tempa{LL@largePic}\else\def\@tempa{LL@smallPic}\fi |
| 822 |
\expandafter\providecommand\csname\@tempa\@Roman{#1}\endcsname{}% |
| 823 |
\expandafter\g@addto@macro\csname\@tempa\@Roman{#1}\endcsname{#2}} |
| 824 |
% \end{macrocode} |
| 825 |
% \end{macro} |
| 826 |
% \end{macro} |
| 827 |
% \begin{macro}{\CutLine} |
| 828 |
% \changes{v2.1a}{2020/11/06}{Optional parameter for line type} |
| 829 |
% \begin{macro}{\CutLine*} |
| 830 |
% \begin{macro}{\Scissors} |
| 831 |
% Adds a line with two scissors on the left side of the page given as |
| 832 |
% parameter |#1|. The starred version draws only the line. |
| 833 |
% \begin{macrocode} |
| 834 |
\newcommand*\CutLine{% |
| 835 |
\@ifstar{\@tempswafalse\LL@CutLine}{\@tempswatrue\LL@CutLine}} |
| 836 |
\@onlypreamble\CutLine |
| 837 |
\newcommand*\LL@CutLine[2][.]{% |
| 838 |
\ifLL@combine |
| 839 |
\ifx\Scissors\@empty\@tempswafalse\fi |
| 840 |
\if .#1% |
| 841 |
\def\@tempa{\dotfill}% |
| 842 |
\else\if -#1% |
| 843 |
\def\@tempa{\hrulefill}% |
| 844 |
\fi\fi |
| 845 |
\edef\@tempb{% |
| 846 |
\noexpand\AddToBackground{#2}{% |
| 847 |
\noexpand\put(0,0){% |
| 848 |
\noexpand\rotatebox{90}{\noexpand\makebox(\paperheight,0){% |
| 849 |
\noexpand\normalsize\@tempa\if@tempswa\noexpand\Scissors% |
| 850 |
\@tempa\@tempa\noexpand\Scissors\@tempa\fi}}}}% |
| 851 |
}% |
| 852 |
\@tempb |
| 853 |
\fi} |
| 854 |
\IfFileExists{pifont.sty} |
| 855 |
{\RequirePackage{pifont}% |
| 856 |
\newcommand*\Scissors{\raisebox{-0.85ex}{\large\ding{34}}}}% |
| 857 |
{\newcommand*\Scissors{}} |
| 858 |
% \end{macrocode} |
| 859 |
% \end{macro} |
| 860 |
% \end{macro} |
| 861 |
% \end{macro} |
| 862 |
% Adds the fold mark code between page~2 and page~3. |
| 863 |
% \begin{macrocode} |
| 864 |
\AddToBackground{3}{\LL@foldmark} |
| 865 |
% \end{macrocode} |
| 866 |
% |
| 867 |
% \subsection{Page construction and output} |
| 868 |
% |
| 869 |
% \subsubsection{Intercepting the small pages} |
| 870 |
% |
| 871 |
% \begin{macro}{\vb@xt@} |
| 872 |
% Similar to \cmd{\hb@xt@} (should be part of the \LaTeX\ kernel). |
| 873 |
% \begin{macrocode} |
| 874 |
\providecommand*\vb@xt@{\vbox to} |
| 875 |
% \end{macrocode} |
| 876 |
% \end{macro} |
| 877 |
% We use our own page saving macro instead of real \LaTeX\ output. |
| 878 |
% \begin{macrocode} |
| 879 |
\AtBeginDocument{\AddToHook{shipout/before}{\LL@processPage}} |
| 880 |
% \end{macrocode} |
| 881 |
% \begin{macro}{LL@page} |
| 882 |
% A counter for the small pages (absolute counting). |
| 883 |
% \begin{macrocode} |
| 884 |
\newcounter{LL@page}\setcounter{LL@page}{1} |
| 885 |
\newcommand\LL@tempa{} |
| 886 |
% \end{macrocode} |
| 887 |
% \end{macro} |
| 888 |
% \begin{macro}{\LL@processPage} |
| 889 |
% With ``combine'' option the six small pages will be saved in box registers |
| 890 |
% (\cmd{\LL@boxI}\dots \cmd{\LL@boxVI}). |
| 891 |
% The \cmd{\ShipoutBox} with the page content must be a bit moved to get a |
| 892 |
% ``normal-sized'' box. In ``nocombine'' mode only put the background picture. |
| 893 |
% \changes{v1.1a}{2015/12/27}{Additions for new option `foldcorr'. (RN)} |
| 894 |
% \changes{v2.0a}{2020/10/13}{Do not call \cmd{\@@@exec@outs} temporarily. (RN)} |
| 895 |
% \changes{v2.0a}{2020/10/13}{Using \LaTeX's new 'shipout/before' hook. (RN)} |
| 896 |
% \changes{v2.0b}{2020/10/14}{Renamed \cmd{\LL@savePage} to |
| 897 |
% \cmd{\LL@processPage}. (RN)} |
| 898 |
% \changes{v2.0c}{2020/10/14}{Activated \cmd{\@@@exec@outs} again. (RN)} |
| 899 |
% \begin{macrocode} |
| 900 |
\newcommand*\LL@processPage{% |
| 901 |
\ifLL@combine\DiscardShipoutBox\fi |
| 902 |
\ifnum\c@LL@page<7\relax |
| 903 |
\LL@tempdima=\paperwidth |
| 904 |
\ifLL@combine |
| 905 |
\iffoldcorr |
| 906 |
\@tempswafalse |
| 907 |
\ifnum\c@LL@page=4\relax |
| 908 |
\@tempswatrue |
| 909 |
\else |
| 910 |
\ifnum\c@LL@page=5\relax |
| 911 |
\@tempswatrue |
| 912 |
\fi |
| 913 |
\fi |
| 914 |
\if@tempswa\LL@tempdima=0.9797979798\paperwidth |
| 915 |
\else\LL@tempdima=1.0101010101\paperwidth \fi |
| 916 |
\fi |
| 917 |
\@@@exec@outs |
| 918 |
\expandafter\newsavebox\csname LL@box\Roman{LL@page}\endcsname% |
| 919 |
\setbox\ShipoutBox=\vbox{\vskip1in\unvbox\ShipoutBox}% |
| 920 |
\setbox\ShipoutBox=\vbox{\moveright1in\box\ShipoutBox}% |
| 921 |
\setbox\ShipoutBox=\hb@xt@\paperwidth{\box\ShipoutBox\hss}% |
| 922 |
\iffoldcorr |
| 923 |
\setbox\ShipoutBox=\hb@xt@\LL@tempdima{\hss\box\ShipoutBox\hss}\fi |
| 924 |
% \end{macrocode} |
| 925 |
% Add a background picture to a single small page (`combine'). |
| 926 |
% \begin{macrocode} |
| 927 |
\setbox\ShipoutBox=\vb@xt@\paperheight{% |
| 928 |
\vbox{% |
| 929 |
\pictur@(0,0)(0,\paperheight)% |
| 930 |
\begingroup |
| 931 |
\set@typeset@protect |
| 932 |
\paperwidth=\LL@tempdima |
| 933 |
\@nameuse{LL@smallPic\Roman{LL@page}}% |
| 934 |
\endgroup |
| 935 |
\endpicture |
| 936 |
}% |
| 937 |
\nointerlineskip\box\ShipoutBox\vss |
| 938 |
}% |
| 939 |
\global\expandafter\setbox |
| 940 |
\csname LL@box\Roman{LL@page}\endcsname=\box\ShipoutBox |
| 941 |
\typeout{\@spaces[\the\c@LL@page] ==> [\Roman{LL@page}]}% |
| 942 |
\else |
| 943 |
% \end{macrocode} |
| 944 |
% Add a background picture to a single small page (`nocombine'). |
| 945 |
% \begin{macrocode} |
| 946 |
\setbox\ShipoutBox\vbox{% |
| 947 |
\vbox{\@tempdima=1in\relax |
| 948 |
\@tempdimb=\paperheight\advance\@tempdimb-\@tempdima |
| 949 |
\pictur@(0,0)(\@tempdima,\@tempdimb)% |
| 950 |
\begingroup |
| 951 |
\set@typeset@protect |
| 952 |
\@nameuse{LL@smallPic\Roman{LL@page}}% |
| 953 |
\endgroup |
| 954 |
\endpicture |
| 955 |
}% |
| 956 |
\nointerlineskip\box\ShipoutBox |
| 957 |
}% |
| 958 |
\fi |
| 959 |
\fi |
| 960 |
\ifnum\c@LL@page=7\relax |
| 961 |
% \end{macrocode} |
| 962 |
% Make this an error or warning message, depending on class option. |
| 963 |
% (|-->| warning in all cases?) |
| 964 |
% \begin{macrocode} |
| 965 |
\begingroup |
| 966 |
\set@typeset@protect |
| 967 |
\LL@toomanypages{% |
| 968 |
The text you supplied fills more than six pages\MessageBreak |
| 969 |
and will therefore not fit onto a single flyer}{% |
| 970 |
Try using smaller fonts or reducing vertical space}% |
| 971 |
\endgroup |
| 972 |
\fi |
| 973 |
\stepcounter{LL@page}} |
| 974 |
% \end{macrocode} |
| 975 |
% \end{macro} |
| 976 |
% |
| 977 |
% \noindent NOTE TO OURSELVES: |
| 978 |
% All the following must be done if the document code is already |
| 979 |
% processed. |
| 980 |
% |
| 981 |
% \changes{v2.0b}{2020/10/14}{Using hooks instead of redefinition |
| 982 |
% of \cmd{\@@end}. (RN)} |
| 983 |
% \begin{macro}{\LL@add@empty@pages} |
| 984 |
% Generating missing small pages |
| 985 |
% \begin{macrocode} |
| 986 |
\newcommand*\LL@add@empty@pages{% |
| 987 |
\clearpage\pagestyle{empty}% |
| 988 |
\loop\ifnum\c@LL@page<7\relax |
| 989 |
\ClassInfo{leaflet}{Generating empty page \the\c@page}% |
| 990 |
\null\newpage |
| 991 |
\repeat |
| 992 |
} |
| 993 |
% \end{macrocode} |
| 994 |
% \end{macro} |
| 995 |
% \begin{macro}{\LL@shipout@combined@pages} |
| 996 |
% \begin{macrocode} |
| 997 |
\newcommand*\LL@shipout@combined@pages{% |
| 998 |
% \end{macrocode} |
| 999 |
% |
| 1000 |
% \subsubsection{Reassembling the small pages} |
| 1001 |
% |
| 1002 |
% Suppresses all shipout hook's clients (removing other kinds of |
| 1003 |
% background pictures). Our page saving macro is still needed for |
| 1004 |
% the next step and must be set again. |
| 1005 |
% \changes{v2.0b}{2020/10/14}{Suppress other background images. (RN)} |
| 1006 |
% \begin{macrocode} |
| 1007 |
\RemoveFromHook{shipout/foreground}[*] |
| 1008 |
\RemoveFromHook{shipout/background}[*] |
| 1009 |
\RemoveFromHook{shipout/lastpage}[*] |
| 1010 |
\RemoveFromHook{shipout/before}[*] |
| 1011 |
\AddToHook{shipout/before}{\LL@processPage} |
| 1012 |
% \end{macrocode} |
| 1013 |
% Create empty pages if necessary. |
| 1014 |
% \begin{macrocode} |
| 1015 |
\LL@add@empty@pages |
| 1016 |
% \end{macrocode} |
| 1017 |
% Here begins the real output. LaTeX's \cmd{\shipout} will no more suppressed. |
| 1018 |
% The begin dvi hook is reactivated. Final removing content from the hook. |
| 1019 |
% \begin{macrocode} |
| 1020 |
\RemoveFromHook{shipout/before}[*] |
| 1021 |
\let\@begindvi\LL@begindvi |
| 1022 |
\paperwidth=3\paperwidth |
| 1023 |
\iflandscape |
| 1024 |
\LL@pagesize@specials{\paperwidth}{\paperheight}% |
| 1025 |
\else |
| 1026 |
\LL@pagesize@specials{\paperheight}{\paperwidth}% |
| 1027 |
\fi |
| 1028 |
% \end{macrocode} |
| 1029 |
% \begin{macro}{\LL@shipoutPage} |
| 1030 |
% \changes{v1.0c}{2004/08/13}{Fix \cmd{\protect}-ion problems. (RN/HjG)} |
| 1031 |
% This is similar to \LaTeX's \cmd{\@outputpage}, but without a group; |
| 1032 |
% \cmd{\set@display@protect} seems to work as well. |
| 1033 |
% \begin{macro}{\LL@preparePages} |
| 1034 |
% \begin{macro}{\LL@preparePage} |
| 1035 |
% Helper macros for page output: reassemble the small pages. |
| 1036 |
% |
| 1037 |
% \begin{macrocode} |
| 1038 |
\newcommand*\LL@shipoutPage[1]{% |
| 1039 |
% \set@display@protect |
| 1040 |
\let \protect \noexpand |
| 1041 |
\shipout\vb@xt@\paperheight{% |
| 1042 |
\set@typeset@protect |
| 1043 |
\vskip-1in% |
| 1044 |
\@begindvi\hb@xt@\paperwidth{\hskip-1in##1\hss}\vss}}% |
| 1045 |
\newcommand*\LL@preparePages[3]{% |
| 1046 |
\typeout{[\@Roman{##1}\space\@Roman{##2}\space\@Roman{##3}] ==>}% |
| 1047 |
% \end{macrocode} |
| 1048 |
% Add a background picture to a large page. |
| 1049 |
% \begin{macrocode} |
| 1050 |
\pictur@(0,0)\@nameuse{LL@largePic\Roman{page}}\endpicture% |
| 1051 |
\LL@preparePage{##1}\LL@preparePage{##2}\LL@preparePage{##3}}% |
| 1052 |
\newcommand*\LL@preparePage[1]{% |
| 1053 |
\expandafter\box\csname LL@box\@Roman{##1}\endcsname}% |
| 1054 |
% \end{macrocode} |
| 1055 |
% \end{macro} |
| 1056 |
% \end{macro} |
| 1057 |
% \end{macro} |
| 1058 |
% Combine and output the frontside and the backside. |
| 1059 |
% The option two part arranges the pages in a different than the ``natural'' |
| 1060 |
% order, to allow the typesetting of a 4 page leaflet and a detachable 2 page |
| 1061 |
% form, for summaries, fill-in forms, applications, questionnaires, etc. |
| 1062 |
% \begin{macrocode} |
| 1063 |
\LL@selectOutput |
| 1064 |
\iftwopart |
| 1065 |
{\setcounter{page}{1}% |
| 1066 |
\LL@shipoutPage{\LL@rotate@I{\LL@preparePages{6}{4}{1}}}}% |
| 1067 |
{\setcounter{page}{2}% |
| 1068 |
\LL@shipoutPage{\LL@rotate@II{\LL@preparePages{2}{3}{5}}}}% |
| 1069 |
\else |
| 1070 |
{\setcounter{page}{1}% |
| 1071 |
\LL@shipoutPage{\LL@rotate@I{\LL@preparePages{5}{6}{1}}}}% |
| 1072 |
{\setcounter{page}{2}% |
| 1073 |
\LL@shipoutPage{\LL@rotate@II{\LL@preparePages{2}{3}{4}}}}% |
| 1074 |
\fi |
| 1075 |
}% |
| 1076 |
% \end{macrocode} |
| 1077 |
% \end{macro} |
| 1078 |
% \begin{macrocode} |
| 1079 |
\ifLL@combine |
| 1080 |
\AddToHook{enddocument/end}{\LL@shipout@combined@pages} |
| 1081 |
\else |
| 1082 |
% \end{macrocode} |
| 1083 |
% Create empty pages if necessary and then call the normal \LaTeX\ end. |
| 1084 |
% \begin{macrocode} |
| 1085 |
\LL@pagesize@specials{\paperwidth}{\paperheight}% |
| 1086 |
\AtEndDocument{% |
| 1087 |
\LL@add@empty@pages |
| 1088 |
} |
| 1089 |
\fi |
| 1090 |
%</class> |
| 1091 |
% \end{macrocode} |
| 1092 |
% Done. Phew! (Did you hear that deep-drawn sigh?) |
| 1093 |
% |
| 1094 |
% \Finale |
| 1095 |
%\endinput |
| 1096 |
% |
| 1097 |
% And here comes the user manual ... |
| 1098 |
%<*manual> |
| 1099 |
\listfiles |
| 1100 |
\errorcontextlines=99 |
| 1101 |
\documentclass[ |
| 1102 |
%%notumble, |
| 1103 |
%%nofoldmark, |
| 1104 |
%%dvipdfm, |
| 1105 |
%%portrait, |
| 1106 |
%%titlepage, |
| 1107 |
%%nocombine, |
| 1108 |
%%a3paper, |
| 1109 |
%%debug, |
| 1110 |
%%nospecialtricks, |
| 1111 |
%%draft, |
| 1112 |
]{leaflet} |
| 1113 |
|
| 1114 |
%\setcounter{secnumdepth}{1} |
| 1115 |
|
| 1116 |
\renewcommand*\foldmarkrule{.3mm} |
| 1117 |
\renewcommand*\foldmarklength{5mm} |
| 1118 |
%\setmargins{11mm}{3in}{8mm}{20mm} |
| 1119 |
% |
| 1120 |
%\pagestyle{plain} |
| 1121 |
|
| 1122 |
\usepackage[T1]{fontenc} |
| 1123 |
\usepackage{textcomp} |
| 1124 |
\usepackage{mathptmx} |
| 1125 |
\usepackage[scaled=0.9]{helvet} |
| 1126 |
% the TeX and LaTeX logos for use with Times |
| 1127 |
\makeatletter |
| 1128 |
\def\ptmTeX{T\kern-.1667em\lower.5ex\hbox{E}\kern-.075emX\@} |
| 1129 |
\DeclareRobustCommand{\ptmLaTeX}{L\kern-.3em |
| 1130 |
{\setbox0\hbox{T}% |
| 1131 |
%\vb@xt@ % :-) |
| 1132 |
\vbox to\ht0{\hbox{% |
| 1133 |
\csname S@\f@size\endcsname |
| 1134 |
\fontsize\sf@size\z@ |
| 1135 |
\math@fontsfalse\selectfont |
| 1136 |
A}% |
| 1137 |
\vss}% |
| 1138 |
}% |
| 1139 |
\kern-.12em |
| 1140 |
\ptmTeX} |
| 1141 |
\makeatother |
| 1142 |
\let\TeX=\ptmTeX |
| 1143 |
\let\LaTeX=\ptmLaTeX |
| 1144 |
\usepackage{shortvrb} |
| 1145 |
\MakeShortVerb{\|} |
| 1146 |
\usepackage{url} |
| 1147 |
\usepackage{graphicx} |
| 1148 |
\usepackage[svgnames]{xcolor} |
| 1149 |
|
| 1150 |
%%%%\renewcommand{\descfont}{\normalfont} |
| 1151 |
\newcommand\Lpack[1]{\textsf{#1}} |
| 1152 |
\newcommand\Lclass[1]{\textsf{#1}} |
| 1153 |
\newcommand\Lopt[1]{\texttt{#1}} |
| 1154 |
\newcommand\Lprog[1]{\textit{#1}} |
| 1155 |
|
| 1156 |
\newcommand*\defaultmarker{\textsuperscript\textasteriskcentered} |
| 1157 |
|
| 1158 |
\title{The document class \Lclass{leaflet}} |
| 1159 |
\author{% |
| 1160 |
Rolf Niepraschk\\ |
| 1161 |
Walter Schmidt\\ |
| 1162 |
Hubert G\"a\ss lein} |
| 1163 |
\date{Last updated~\docdate\\printed \today} |
| 1164 |
|
| 1165 |
\CutLine*{1}% Dotted line without scissors (same as \CutLine*[.]{1}) |
| 1166 |
\CutLine[-]{6}% Solid line with scissors |
| 1167 |
|
| 1168 |
\AddToBackground{5}{% Background of a small page |
| 1169 |
\put(0,0){\textcolor{LightSkyBlue}{\rule{\paperwidth}{\paperheight}}}} |
| 1170 |
|
| 1171 |
\AddToBackground*{2}{% Background of a large page |
| 1172 |
\put(.5\paperwidth,.5\paperheight){% |
| 1173 |
\makebox(0,0)[c]{% |
| 1174 |
\resizebox{.9\paperwidth}{!}{\rotatebox{35.26}{% |
| 1175 |
\textsf{\textbf{\textcolor{LightGray}{BACKGROUND}}}}}}}} |
| 1176 |
|
| 1177 |
\begin{document} |
| 1178 |
|
| 1179 |
\maketitle |
| 1180 |
|
| 1181 |
%%\LARGE |
| 1182 |
|
| 1183 |
%%\tableofcontents |
| 1184 |
|
| 1185 |
|
| 1186 |
\section{Overview} |
| 1187 |
|
| 1188 |
The document class \Lclass{leaflet} creates a document of (up to) six |
| 1189 |
small pages in portrait orientation, arranged physically on two |
| 1190 |
``normal-size'' pages. The target page sizes supported by the standard |
| 1191 |
\LaTeX{} \Lclass{article} are available, plus |a3paper|. Printing these |
| 1192 |
to both sides of a sheet and folding appropriately will yield a six-page |
| 1193 |
leaflet. |
| 1194 |
|
| 1195 |
%% TEST: These commands are no longer disabled! |
| 1196 |
\iffalse |
| 1197 |
\reversemarginpar |
| 1198 |
\marginpar[XXX]{YYY} |
| 1199 |
\fi |
| 1200 |
%% TEST: These commands are disabled! |
| 1201 |
\onecolumn |
| 1202 |
\twocolumn[WWW] |
| 1203 |
%% end of TEST |
| 1204 |
|
| 1205 |
\section{Requirements} |
| 1206 |
|
| 1207 |
Using the \Lclass{leaflet} class requires that the final |
| 1208 |
document is created in PostScript or PDF format, using |
| 1209 |
\begin{itemize} |
| 1210 |
\item \TeX{} and \Lprog{dvips}, or |
| 1211 |
\item pdf\TeX{}, or |
| 1212 |
\item V\TeX{} in PS or PDF mode. |
| 1213 |
\end{itemize} |
| 1214 |
(Some other drivers supported by standard \LaTeX{} work as well.) |
| 1215 |
|
| 1216 |
\section{Features} |
| 1217 |
|
| 1218 |
Basically the \Lclass{leaflet} class provides the same features as the |
| 1219 |
standard \Lclass{article} class. There are, however, a number of |
| 1220 |
differences and restrictions, as well as some additional facilities and |
| 1221 |
peculiarities: |
| 1222 |
|
| 1223 |
\begin{itemize} |
| 1224 |
|
| 1225 |
\item |
| 1226 |
The sectioning level |\part| is not available. |
| 1227 |
The other sectioning levels are not numbered by default. |
| 1228 |
|
| 1229 |
\item |
| 1230 |
References to the page where floating objects are located may come out |
| 1231 |
wrong (this includes |\pageref| as well as |\listof...| commends). |
| 1232 |
|
| 1233 |
\item |
| 1234 |
Section headers are typeset in a smaller font size than in the |
| 1235 |
standard classes. |
| 1236 |
|
| 1237 |
\item |
| 1238 |
You may use list-like environments just as in the standard classes. |
| 1239 |
The left margins have been adjusted to work well with the |
| 1240 |
\Lopt{a4paper} and \Lopt{letterpaper} class options. |
| 1241 |
With other target page sizes, you'll have to adjust them. |
| 1242 |
|
| 1243 |
Here's a small demo: |
| 1244 |
\begin{description} |
| 1245 |
\item[Uncle Meat] First entry in a description environment. |
| 1246 |
\item[King Kong] Second entry. |
| 1247 |
\begin{itemize} |
| 1248 |
\item First entry in an itemize environment. |
| 1249 |
\begin{enumerate} |
| 1250 |
\item First entry in an enumerate environment. |
| 1251 |
\item Second entry. |
| 1252 |
\begin{enumerate} |
| 1253 |
\item First entry in an enumerate environment. |
| 1254 |
\begin{enumerate} |
| 1255 |
\item First entry in an enumerate environment. |
| 1256 |
\item Second entry. |
| 1257 |
\end{enumerate} |
| 1258 |
\item Second entry. |
| 1259 |
\begin{itemize} |
| 1260 |
\item First entry in an itemize environment. |
| 1261 |
\item Second entry. |
| 1262 |
\end{itemize} |
| 1263 |
\item Another entry. |
| 1264 |
\end{enumerate} |
| 1265 |
\item Another entry. |
| 1266 |
\end{enumerate} |
| 1267 |
\item Second entry. |
| 1268 |
\item Another entry. |
| 1269 |
\end{itemize} |
| 1270 |
\item[Frunobulax] Another entry. |
| 1271 |
\end{description} |
| 1272 |
|
| 1273 |
\item |
| 1274 |
Marginal notes are pointless on the given page size and |
| 1275 |
are disabled. |
| 1276 |
|
| 1277 |
\item |
| 1278 |
Two-column typesetting is not supported for the same reason. |
| 1279 |
|
| 1280 |
\item |
| 1281 |
By default, there are no page headers, page footers or page numbers, |
| 1282 |
nor is there any space reserved for these. |
| 1283 |
|
| 1284 |
However, you can restore them, if you like. |
| 1285 |
To do so, use |\pagestyle| as with the standard classes, |
| 1286 |
and |\setlength| to adjust the corresponding parameters (like |
| 1287 |
|\headheight|). |
| 1288 |
At last, you have to call the new macro \par |
| 1289 |
| \setmargins{top}{bottom}{left}{right}|. |
| 1290 |
|
| 1291 |
\item |
| 1292 |
Paragraphs are separated by vertical space; the first line |
| 1293 |
of a paragraph is not indented by default. |
| 1294 |
|
| 1295 |
\item |
| 1296 |
By default, all paragraphs are typeset as if you had |
| 1297 |
specified |\sloppy| in the document preamble. |
| 1298 |
|
| 1299 |
\item |
| 1300 |
A small folding mark is created between the second and the |
| 1301 |
third page. |
| 1302 |
|
| 1303 |
\item |
| 1304 |
The macro |\CutLine| draws a vertical dotted line with |
| 1305 |
scissor symbols between the page indicated by its argument and the |
| 1306 |
preceding one. The optional parameter |[-]| changes the dotted line to a |
| 1307 |
solid one. The starred version omits the scissors symbols. |
| 1308 |
|
| 1309 |
\item |
| 1310 |
In case the text does not fit on six pages, a warning (or error, |
| 1311 |
depending on some class option, see below) will be issued. |
| 1312 |
|
| 1313 |
\item |
| 1314 |
To add some background picture to individual pages, you can use |
| 1315 |
|\AddToBackground| commands. Its first argument specifies the page, |
| 1316 |
the second one the picture commands. |
| 1317 |
The starred version puts the picture on the combined pages. |
| 1318 |
|
| 1319 |
\end{itemize} |
| 1320 |
|
| 1321 |
|
| 1322 |
\section{Customization} |
| 1323 |
|
| 1324 |
The typeface to be used for the section headings is given by the macro |
| 1325 |
|\sectfont|, and the typeface to be used for the labels of the |
| 1326 |
|description| environment is given by |\descfont|. |
| 1327 |
Both macros default to |\bfseries| and can be changed using |
| 1328 |
|\renewcommand*|. |
| 1329 |
|
| 1330 |
The horizontal and vertical margins of the (small) pages |
| 1331 |
have the standard sizes 8 mm and 11 mm, respectively, and can be changed |
| 1332 |
using |\setmargins|, as explained above. |
| 1333 |
This may be useful, if the printing engine exhibits larger unprintable |
| 1334 |
margins. |
| 1335 |
|
| 1336 |
The macros |\foldmarkrule| and |\foldmarklength| determine the stroke |
| 1337 |
width and the length of the fold mark, which is printed between the |
| 1338 |
second and the third page. |
| 1339 |
They default to 0.4\,pt and 2\,mm, respectively, and can be changed |
| 1340 |
using |\renewcommand*| (\emph{not} |\setlength|!). |
| 1341 |
See also the class options \Lopt{foldmark} and \Lopt{nofoldmark}. |
| 1342 |
|
| 1343 |
|
| 1344 |
\section{Class options} |
| 1345 |
|
| 1346 |
Default options are marked with an asterisk: |
| 1347 |
\begin{description} |
| 1348 |
\item[\Lopt{tumble}{\defaultmarker}, \Lopt{notumble}] |
| 1349 |
By default, the contents of the back side of the final sheet is |
| 1350 |
printed upside down. |
| 1351 |
The option \Lopt{notumble} suppresses that. |
| 1352 |
Doing so may be necessary to suit the behavior of certain printing |
| 1353 |
engines. |
| 1354 |
Specifying \Lopt[notumble] may also be useful during the writing of |
| 1355 |
a document, to enable proof-reading on the screen. |
| 1356 |
\item[\Lopt{frontside}, \Lopt{backside}, \Lopt{bothsides}{\defaultmarker}] |
| 1357 |
These options control whether only the front page, the back page or |
| 1358 |
both pages of the final sheet are to be be created. |
| 1359 |
Thus, you can create separate files for the front an back side of |
| 1360 |
the sheet. |
| 1361 |
\item[\Lopt{foldmark}{\defaultmarker}, \Lopt{nofoldmark}] |
| 1362 |
These options specifiy whether or not a fold mark is to be printed. |
| 1363 |
\item[\Lopt{combine}{\defaultmarker}, \Lopt{nocombine}] |
| 1364 |
These options specify whether the (small) pages should be output |
| 1365 |
combined on a (large) target page (\Lopt{combine}) or as individual |
| 1366 |
pages (\Lopt{nocombine}). |
| 1367 |
|
| 1368 |
At the same time, the determine behaviour in case the text does not |
| 1369 |
fit on six (small) pages. |
| 1370 |
By default (\Lopt{combine}), an error is raised---and the surplus pages |
| 1371 |
will be gobbled. |
| 1372 |
Otherwise (\Lopt{nocombine}), just a warning will be issued; |
| 1373 |
shortening the text appropriately is left to the user. |
| 1374 |
\item[\Lopt{twopart}, \Lopt{notwopart}{\defaultmarker}] |
| 1375 |
Allows the typesetting of a four page leaflet (first part) and a two page |
| 1376 |
detachable form (second part), for fill-in forms, questionnaires, applications, |
| 1377 |
etc. |
| 1378 |
\item[\Lopt{foldcorr}, \Lopt{nofoldcorr}{\defaultmarker}] |
| 1379 |
Decreases the width of pages 4 and 5 by 2\,\% (A4 paper: 2\,mm) and |
| 1380 |
increases the other pages by 1\,\% (A4 paper: 1\,mm) for easier |
| 1381 |
folding in combine mode. |
| 1382 |
\end{description} |
| 1383 |
|
| 1384 |
Other options are passed to the \Lclass{article} class. |
| 1385 |
|
| 1386 |
|
| 1387 |
\section{Changes over version 0.3} |
| 1388 |
|
| 1389 |
The present release of the \Lclass{leaflet} class differs basically |
| 1390 |
from its predecessor, version~0.3, which had been developed originally |
| 1391 |
by J\"urgen Schlegelmilch. |
| 1392 |
|
| 1393 |
The main change is, that no more post-processing is required to |
| 1394 |
arrange the pages on the sheet. |
| 1395 |
Furthermore, the overall layout has been changed slightly to suit the |
| 1396 |
small page size better. |
| 1397 |
In general, documents that were written for version~0.3 will exhibit |
| 1398 |
different line and page breaks when typeset using the new version of |
| 1399 |
this document class. |
| 1400 |
|
| 1401 |
\begin{thebibliography}{000} |
| 1402 |
\bibitem{cit:latex-man} |
| 1403 |
\textsc{L.\,Lamport}: \LaTeX. A Document Preparation System. |
| 1404 |
\textit{User's Guide And Reference Manual.} Second Edition. 1994. |
| 1405 |
\end{thebibliography} |
| 1406 |
|
| 1407 |
\loggingall |
| 1408 |
\end{document} |
| 1409 |
%</manual> |
| 1410 |
\endinput |
| 1411 |
|