Debian Codegraph @

texmf-dist/source/latex/latexdemo/latexdemo.dtx

raw
1 % \iffalse meta-comment
2 % !TeX spellcheck = en-US
3 %
4 % File: latexdemo.sty
5 % Version: 2023/03/26 v0.2
6 % Author: Matthias Pospiech
7 % Email: <[email protected]>
8 %
9 % Copyright (C) 2023 by Matthias Pospiech ([email protected])
10 % ---------------------------------------------------------------------------
11 % This work may be distributed and/or modified under the
12 % conditions of the LaTeX Project Public License, either version 1.3
13 % of this license or (at your option) any later version.
14 % The latest version of this license is in
15 % http://www.latex-project.org/lppl.txt
16 % and version 1.3 or later is part of all distributions of LaTeX
17 % version 2005/12/01 or later.
18 %
19 % This work has the LPPL maintenance status `maintained'.
20 %
21 % The Current Maintainer of this work is Matthias Pospiech.
22 %
23 % This work consists of the files latexdemo.dtx and latexdemo.ins
24 % and the derived filebase latexdemo.sty.
25 %
26 % \fi
27 %
28 % \iffalse
29 %<*driver>
30 \ProvidesFile{latexdemo.dtx}
31 %</driver>
32 %<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
33 %<package>\ProvidesPackage{latexdemo}
34 %<*package>
35 [2023/03/26 v0.2 typeset code and resulting output]
36 %</package>
37 %
38 %<*driver>
39 \documentclass{ltxdoc}
40 \usepackage{hypdoc}
41 \RequirePackage{latexdemo}
42 \usepackage{lmodern}
43 %%%% Additional packages
44 \usepackage{soulutf8}
45 %
46 %%% Configures doc.sty and its (outdated) index generation, which does
47 % not work together with any modern package and has no hyperref support
48 % and thus no links. Furthermore it is conflicts with the index macros
49 % of doctools.
50 %
51 \EnableCrossrefs % (default) Every new macro name used within a macrocode or
52 % macrocode∗ environment will produce an index entry.
53 % \DisableCrossrefs % turn off this feature
54 %
55 % If an index is created is determined by the use of the following
56 % declarations in the driver file preamble; if neither is used, no index is
57 % produced.
58 \PageIndex % all index entries refer to their page number
59 % \CodelineIndex % index entries produced by \DescribeMacro and \DescribeEnv
60 % refer to page number but those produced by the macro
61 % environment refer to the code lines,
62 % which will be numbered automatically.
63 % \CodelineNumbered % no index is created, but the code lines are numbered
64
65 \RecordChanges
66
67 \listfiles
68
69 \begin{document}
70 \DocInput{latexdemo.dtx}
71 \PrintChanges
72 \PrintIndex
73 \end{document}
74 %</driver>
75 % \fi
76 %
77 % \CheckSum{0}
78 %
79 % \CharacterTable
80 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
81 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
82 % Digits \0\1\2\3\4\5\6\7\8\9
83 % Exclamation \! Double quote \" Hash (number) \#
84 % Dollar \$ Percent \% Ampersand \&
85 % Acute accent \' Left paren \( Right paren \)
86 % Asterisk \* Plus \+ Comma \,
87 % Minus \- Point \. Solidus \/
88 % Colon \: Semicolon \; Less than \<
89 % Equals \= Greater than \> Question mark \?
90 % Commercial at \@ Left bracket \[ Backslash \\
91 % Right bracket \] Circumflex \^ Underscore \_
92 % Grave accent \` Left brace \{ Vertical bar \|
93 % Right brace \} Tilde \~}
94 %
95 %
96 % \changes{v0.1}{2012/12/01}{initial version (converted to dtx file)}
97 %
98 % \DoNotIndex{\newcommand,\newenvironment}
99 %
100 % \providecommand*{\url}{\texttt}
101 % \GetFileInfo{latexdemo.dtx}
102 % \title{The \textsf{latexdemo} package}
103 % \author{Matthias Pospiech \\ \url{[email protected]}}
104 % \date{\fileversion~from \filedate}
105 %
106 % \maketitle
107 % \section{Introduction}
108 % In order to demonstrate \latex{} code it is very useful to have the code and
109 % the resulting output together in the same document.
110 % \package{latexdemo}
111 % is a package that provides configurable tools to print out \latex{} code and the
112 % resulting output in the same document.
113 %
114 % The difference to other similar packages is the support of
115 % verbatim material inside a conditional sequence and the consequence that each
116 % code must be written to an external file.
117 %
118 % The commands provided by this package are based on the packages
119 % \package{listings}, \package{mdframed} and the enviroment \environment{filecontents}.
120 %
121 % \section{Basic example}
122 % \label{sec:example:basic}
123 % Below is a principle example,
124 % which demonstrates the usage of the package by showing some commands of a
125 % package (\package{soul}) with the resulting code side by side:
126 %
127 % \iffalse
128 %<*example>
129 % \fi
130 \begin{DefineCode}
131 \so{letterspacing}, \\
132 \ul{underlining}, \\
133 \st{overstriking} \\
134 and \hl{highlighting}.
135 \end{DefineCode}
136 % \iffalse
137 %</example>
138 % \fi
139 %
140 % \PrintDemo{style=parallel}
141 %
142 % which is created with the code of this package using \cs{ifcsdef} from etoolbox
143 % to test if the code will run through or fail because of unkown commands.
144 %
145 % \iffalse
146 %<*example>
147 % \fi
148 \begin{lstlisting}[style=demostyle]
149 \begin{DefineCode}
150 \so{letterspacing}, \\
151 \ul{underlining}, \\
152 \st{overstriking} \\
153 and \hl{highlighting}.
154 \end{DefineCode}
155
156 \ifcsdef{so}{%
157 %
158 \PrintDemo{style=parallel}
159 %
160 }{%
161 \DemoError{Command \cs{so} of package%
162 \package{soul} not available.
163 Probably the package was not loaded.
164 }
165 }%
166 \end{lstlisting}
167 % \iffalse
168 %</example>
169 % \fi
170 %
171 % \section{Usage}
172 %
173 % \subsection{Define code}
174 % This package requires the example code to be written to an external file. The
175 % filename is saved in the command sequence \cs{democodefile}. The output is done
176 % with the \environment{DefineCode} environment:
177 %
178 % \iffalse
179 %<*example>
180 % \fi
181 \begin{lstlisting}[style=demostyle]
182 \begin{DefineCode}
183 ... code ...
184 \end{DefineCode}
185 \end{lstlisting}
186 % \iffalse
187 %</example>
188 % \fi
189 %
190 % The requirement for an external file originates from the problem that verbatim
191 % content cannot be saved in normal tex macros since the line breaks and white
192 % spaces get lost. Furthermore, any solution which would solve this problem would
193 % fails finally because saving such contend cannot be included in conditional
194 % code statements\footnote{See discussion on:
195 % \url{http://tex.stackexchange.com/questions/29256/}}.
196 %
197 % The content in the file defined by \cs{democodefile} is further read for the
198 % printing of the code and the corresponding output.
199 %
200 % \subsection{Print code and result}
201 %
202 % \DescribeMacro{\PrintDemo}\arg{style=\meta{option}} \AfterLastParam%
203 % This is the macro for the output of code and result.
204 % The layout of both is defined with the style option.
205 % The following options are possible
206 % \begin{Optionlist}
207 % \option{parallel} & code and result side by side. \\
208 % \option{stacked} & (default) code and result with 100\,\% text width
209 % stacked.\\
210 % \option{lines} & like \texttt{stacked}, but with lines on
211 % top and bottom of the result instead of a
212 % surrounding box. \\
213 % \option{none} & like \texttt{stacked}, but with nothing around the
214 % result. \\
215 % \option{page} & result on a single page.\\
216 % \end{Optionlist}
217 %
218 % You should use \option{parallel} for small examples and \option{stacked}
219 % otherwise. The options \option{lines} and \option{none} is primarily
220 % for those cases where a surrounding box is disturbing or impossible.
221 % The latter occurs for example in cases where content is written across
222 % the text width boundaries. The option \option{page} is obviously for
223 % those cases where the output is very large or written to another page anyway.
224 %
225 % \subsubsection{Examples}
226 % The following code is used in the examples
227 % \iffalse
228 %<*example>
229 % \fi
230 \begin{lstlisting}[style=demostyle]
231 \begin{DefineCode}
232 This code shows some basic math: $a^2 + b^2 = c^2$.
233 \end{DefineCode}
234 \end{lstlisting}
235 %
236 \begin{DefineCode}
237 This code shows some basic math: $a^2 + b^2 = c^2$.
238 \end{DefineCode}
239 % \iffalse
240 %</example>
241 % \fi
242 %
243 % \begin{itemize}
244 % \item \cs{PrintDemo}\{style=parallel\}
245 % \PrintDemo{style=parallel}
246 %
247 % \item \cs{PrintDemo}\{style=stacked\}
248 % \PrintDemo{style=stacked}
249 %
250 % \item \cs{PrintDemo}\{style=lines\}
251 % \PrintDemo{style=lines}
252 %
253 % \item \cs{PrintDemo}\{style=none\}
254 % \PrintDemo{style=none}
255 % \end{itemize}
256 %
257 % The prefix text for code and result and the filename can be changed. The
258 % commands are introduced in section~\ref{sec:setup}. Commands for the output of
259 % content such as the name of of a package, a command, an environment or a
260 % generalized error message are introduced in section~\ref{sec:commands:output}.
261 %
262 % \subsection{Setup}
263 % \label{sec:setup}
264 %
265 % The following commands define the name for the temporary file or the strings
266 % used for the printing of code or results. Use \cs{renewcommand} to change the
267 % definitions.
268 %
269 % \DescribeMacro{\democodefile}%
270 % Filename for the temporary file required for code and results printing.
271 % \Default{democode}
272 %
273 % \DescribeMacro{\democodeprefix}%
274 % Prefix text for output of code.
275 % \Default{Code: }
276 %
277 % \DescribeMacro{\demoresultprefix}%
278 % Prefix text for output of the result.
279 % \Default{Result: }
280 %
281 % \subsection{Output commands}
282 % \label{sec:commands:output}
283 %
284 % The following commands are provided for the user to print out and format
285 % commands, environments, packages and errors. Some are provided by the
286 % \package{doctools} package.
287 %
288 % \DescribeMacro{\command} \marg{cmd} \AfterLastParam
289 % Prints out the argument \cs{command}\arg{foo} as \cs{foo}.
290 %
291 % \DescribeMacro{\cs} \marg{cmd} \AfterLastParam
292 % Shortcut for \cs{command}.
293 %
294 % \DescribeMacro{\arg} \marg{cmd} \AfterLastParam
295 % Prints out an argument in curled brackets without the use of
296 % angle brackets as in \cs{marg} or \cs{oarg}.
297 % Thus prints \cs{arg}\arg{foo} as \arg{foo}.
298 %
299 % \DescribeMacro{\environment} \marg{environment} \AfterLastParam
300 % Prints out an environment name as \environment{environment}.
301 %
302 % \DescribeMacro{\env} \marg{environment} \AfterLastParam
303 % Shortcut for \cs{environment}
304 %
305 % \DescribeMacro{\package} \marg{package} \AfterLastParam
306 % Prints out a package name as \package{package}.
307 %
308 % \DescribeMacro{\DemoError}%
309 % prints out the given error message
310 % \Example{\DemoError{foo}}
311 %
312 %
313 % \StopEventually{}
314 %
315 % \clearpage
316 % \section{Implementation}
317 %
318 % \iffalse
319 %<*latexdemo.sty>
320 % \fi
321 %
322 % \begin{macrocode}
323 \NeedsTeXFormat{LaTeX2e}
324 \ProvidesPackage{latexdemo}[2012/12/01 v0.1 typeset code and resulting output]
325 \@ifpackageloaded{hypdoc}
326 {\RequirePackage[loadHyperref=true,%
327 createIndexEntries=false,%
328 applyLayout=false]{doctools}}
329 {\@ifpackageloaded{doc}
330 {\RequirePackage[loadHyperref=false,%
331 createIndexEntries=false,%
332 applyLayout=false]{doctools}}
333 {}}
334 %%% listings (must be loaded before \AtBeginDocument)
335 \RequirePackage{listings}
336 \PassOptionsToPackage{table}{xcolor}
337 % This code needs to be executed at the beginning
338 % of the document because some packages (eg. xcolor)
339 % could lead to option clashes otherwise
340 %
341 %% Programming
342 \RequirePackage{xspace}
343 \RequirePackage{etoolbox}
344 %% Packages for frames
345 \RequirePackage{mdframed}
346 \RequirePackage{framed}
347 %
348 \AtBeginDocument{%
349 % \end{macrocode}
350 % \subsection{Preamble}
351 % \subsubsection{Packages}
352 %
353 % \begin{macrocode}
354 %% Package for colors
355 \RequirePackage{xcolor}
356 %
357 %% load doctools without hyperref if not loaded and no documentation
358 %% package was loaded.
359 \@ifpackageloaded{doctools}{}
360 {\RequirePackage[loadHyperref=false,%
361 createIndexEntries=true,%
362 applyLayout=false]{doctools}}
363 % \end{macrocode}
364 %
365 % \subsubsection{Colors}
366 %
367 % \begin{macrocode}
368 %% Colors
369 \colorlet{demo@stringcolor}{green!40!black!100}
370 \colorlet{demo@commentcolor}{green!50!black!100}
371 \colorlet{demo@numbercolor}{white!50!black!100}
372 \colorlet{demo@codebackcolor}{white!95!black!100}
373 \colorlet{demo@resultbackcolor}{white}
374 \definecolor{demo@keywordcolor}{rgb}{0,0.47,0.80}
375 \definecolor{demo@rulecolor}{rgb}{0,0.4,0.5}
376 \definecolor{demo@code@rulecolor}{rgb}{0.5,0.5,0.5}
377 % \end{macrocode}
378 %
379 % \subsection{Commands}
380 %
381 % \begin{macrocode}
382 %% === Simple Commands ===============================
383 % \end{macrocode}
384 %
385 % \begin{macro}{\democodefile}
386 % Saves the filename for temporary file output.
387 % \begin{macrocode}
388 \newcommand{\democodefile}{democode}
389 % \end{macrocode}
390 % \end{macro}
391 %
392 % \begin{macro}{\democodeprefix}
393 % Prefix text for code output.
394 % \begin{macrocode}
395 \newcommand{\democodeprefix}{Code: }
396 % \end{macrocode}
397 % \end{macro}
398 %
399 % \begin{macro}{\demoresultprefix}
400 % Prefix text for result output.
401 % \begin{macrocode}
402 \newcommand{\demoresultprefix}{\noindent Result:}
403 % \end{macrocode}
404 % \end{macro}
405 %
406 % \begin{macro}{\DemoError}
407 % Output and formatting of error messages.
408 % \begin{macrocode}
409 %% Print Error
410 \newcommand{\DemoError}[1]{
411 \ifcsdef{textcolor}
412 {\textcolor{red}{Error:~}}
413 {Error:~}
414 #1 \par\noindent
415 }
416 % \end{macrocode}
417 % \end{macro}
418 %
419 % \subsection{Define keys}
420 %
421 % \begin{macrocode}
422 %% === Define Keys ===================================
423 \RequirePackage{kvoptions-patch}
424 \RequirePackage{kvoptions} % options
425 \RequirePackage{pdftexcmds} % string comparison
426 \SetupKeyvalOptions{family=demo,prefix=demo@}
427 % \end{macrocode}
428 % Define default option for style key: \emph{stacked}
429 % \begin{macrocode}
430 \DeclareStringOption[stacked]{style}
431 \ProcessKeyvalOptions{demo}
432 % \end{macrocode}
433 %
434 % \begin{macro}{\PrintDemoUsingKeys}
435 % Evaluate key and execute corresponding commands
436 % \begin{macrocode}
437 \newcommand{\PrintDemoUsingKeys}{%
438 \ifnum\pdf@strcmp{\demo@style}{parallel}=0%
439 \PrintCodeAndResultsParallel%
440 \else\ifnum\pdf@strcmp{\demo@style}{stacked}=0%
441 \PrintCodeAndResultsStacked%
442 \else\ifnum\pdf@strcmp{\demo@style}{lines}=0%
443 \PrintCodeAndResultsStackedLines%
444 \else\ifnum\pdf@strcmp{\demo@style}{page}=0%
445 \PrintCodeAndResultsPage%
446 \else\ifnum\pdf@strcmp{\demo@style}{none}=0%
447 \PrintCodeAndResultsNone%
448 \else%
449 \PackageError{latexdemo}{%
450 \MessageBreak%
451 value >\tplbugs@style< unkown \MessageBreak%
452 }{}%
453 \fi\fi\fi\fi\fi%
454 }%
455 % \end{macrocode}
456 % \end{macro}
457 %
458 % \begin{environment}{DefineCode}
459 % Define code for demonstration using the enviroment \environment{DefineCode} which is based on the enviroment \environment{filecontents*}.
460 % \begin{macrocode}
461 \newenvironment{DefineCode}{%
462 \csname filecontents*\endcsname[overwrite]{\democodefile}%
463 }{%
464 \csname endfilecontents*\endcsname%
465 }
466 % \end{macrocode}
467 % \end{environment}
468 %
469 % \begin{macro}{\PrintDemo}
470 % Print code and result using the key-value syntax
471 % \begin{macrocode}
472 \newcommand{\PrintDemo}[1]{%
473 \begingroup
474 \setkeys{demo}{#1}%
475 \PrintDemoUsingKeys
476 \endgroup
477 }
478 % \end{macrocode}
479 % \end{macro}
480 %
481 % \subsection{listings package style}
482 % \begin{macrocode}
483 %% === Listings style ================================
484 %% reuses style from doctools
485 \lstdefinestyle{demostyle}{
486 ,style=lstDemoStyleLaTeXCode%
487 ,numbers=none%
488 }
489 \lstloadlanguages{[LaTeX]TeX}
490 % \end{macrocode}
491 %
492 % \subsection{mdframed package style}
493 %
494 % \begin{macrocode}
495 %% === Mdframed style ================================
496 \mdfdefinestyle{DemoStyleFrames}{
497 linecolor=demo@rulecolor,%
498 linewidth=0.8pt,
499 skipabove=0.5\baselineskip,
500 skipbelow=0.5\baselineskip,
501 leftmargin =-3.5pt,
502 rightmargin=-3.5pt,
503 innerleftmargin=3pt,
504 innerrightmargin=3pt,
505 needspace=3\baselineskip,
506 }%
507 % \end{macrocode}
508 %
509 % \subsection{Commands for the formatting}
510 %
511 % \begin{macro}{\preResultSkip}
512 % Default skip at the beginning of a result
513 % \begin{macrocode}
514 %% === Formating commands ============================
515 \newcommand{\preResultSkip}{}%\vspace*{-0.5\baselineskip}
516 % \end{macrocode}
517 % \end{macro}
518 %
519 %
520 % \begin{environment}{latexresult}
521 % Environment to print the result in a box
522 % \begin{macrocode}
523 \newenvironment{latexresult}{%
524 \demoresultprefix
525 \nopagebreak[4]
526 \preResultSkip
527 \mdframed[%
528 style=DemoStyleFrames,
529 backgroundcolor=demo@resultbackcolor,%
530 usetwoside=false,
531 ]%
532 }{
533 \endmdframed
534 \noindent
535 }
536 % \end{macrocode}
537 % \end{environment}
538 %
539 %
540 % \begin{macro}{\resultline}
541 %% Single Line for results
542 % \begin{macrocode}
543 \newcommand{\resultline}{%
544 \nopagebreak[4]
545 %% Insert single line
546 \mdframed[%
547 style=DemoStyleFrames,
548 skipabove=3pt,
549 skipbelow=3pt,
550 topline=true,bottomline=false,leftline=false,rightline=false,
551 backgroundcolor=white,%
552 ]\mbox{}\endmdframed
553 \nopagebreak[4]
554 }
555 % \end{macrocode}
556 % \end{macro}
557 %
558 % % \subsection{Low level commands for printing of code and result}
559 %
560 % \begin{macro}{\printlatexcode}
561 % Prints the code using \cs{lstinputlisting}
562 % \begin{macrocode}
563 %% === Output commands ===============================
564 %% Print Code with prefix
565 \newcommand{\printlatexcode}[1][\democodefile]{%
566 \def\demoInputFile{#1}%
567 \IfFileExists{\demoInputFile.tex}{%
568 \democodeprefix%
569 \lstinputlisting[style=demostyle,nolol=true]{\demoInputFile}}{}%
570 }%
571 % \end{macrocode}
572 % \end{macro}
573 %
574 %
575 % \begin{macro}{\printlatexresult}
576 % Prints the result enclosed in the \environment{latexresult} environment.
577 % The evaluation of the code is simply achieved by loading the file with
578 % \cs{input}.
579 % \begin{macrocode}
580 %% Print Result with standard box
581 \newcommand{\printlatexresult}[1][\democodefile]{%
582 \def\demoInputFile{#1}%
583 \begin{latexresult}%
584 \IfFileExists{\demoInputFile.tex}{\input{\demoInputFile.tex}}{}%
585 \end{latexresult}%
586 }%
587 % \end{macrocode}
588 % \end{macro}
589 %
590 %
591 % \begin{macro}{\printlatexresultlines}
592 % Like \cs{printlatexresult} but with lines above and below instead of a
593 % surrounding box.
594 % \begin{macrocode}
595 %% Print result with lines
596 \newcommand{\printlatexresultlines}{%
597 \demoresultprefix
598 \nopagebreak[4] \resultline \nopagebreak[4]
599 \IfFileExists{\democodefile}{\input{\democodefile}}{}%
600 \nopagebreak[4] \resultline \nopagebreak[4]
601 }%
602 % \end{macrocode}
603 % \end{macro}
604 %
605 % \subsection{Output of code and result}
606 %
607 % \begin{macro}{\PrintCodeAndResultsParallel}
608 % \begin{macrocode}
609 %% === Output commands for code and result ===========
610 \newcommand{\PrintCodeAndResultsParallel}{%
611 \nopagebreak[4]
612 \vspace*{0.5em}\par\noindent
613 \begin{minipage}[t]{0.48\linewidth}
614 \printlatexcode
615 \end{minipage} \hfill
616 \begin{minipage}[t]{0.48\linewidth}
617 \printlatexresult
618 \end{minipage}
619 \par\noindent
620 }
621 % \end{macrocode}
622 % \end{macro}
623 %
624 %
625 % \begin{macro}{\PrintCodeAndResultsStacked}
626 % \begin{macrocode}
627 \newcommand{\PrintCodeAndResultsStacked}{%
628 \nopagebreak[4]
629 \vspace*{0.5em}\par\noindent
630 \printlatexcode%
631 \printlatexresult%
632 \par\noindent
633 }%
634 % \end{macrocode}
635 % \end{macro}
636 %
637 %
638 % \begin{macro}{\PrintCodeAndResultsStackedLines}
639 % \begin{macrocode}
640 \newcommand{\PrintCodeAndResultsStackedLines}{%
641 \nopagebreak[4]
642 \vspace*{0.5em}\par\noindent
643 \printlatexcode%
644 \printlatexresultlines%
645 \vspace*{0.5em}\par\noindent
646 }%
647 % \end{macrocode}
648 % \end{macro}
649 %
650 %
651 % \begin{macro}{\PrintCodeAndResultsNone}
652 % \begin{macrocode}
653 \newcommand{\PrintCodeAndResultsNone}{%
654 \nopagebreak[4]
655 \vspace*{0.5em}\par\noindent
656 \printlatexcode%
657 % \end{macrocode}
658 %
659 % \begin{macrocode}
660 \demoresultprefix
661 \nopagebreak[4]
662 \par\noindent
663 \IfFileExists{\democodefile}{\input{\democodefile}}{}%
664 % \end{macrocode}
665 %
666 % \begin{macrocode}
667 \vspace*{0.5em}\par\noindent
668 }%
669 % \end{macrocode}
670 % \end{macro}
671 %
672 %
673 % \begin{macro}{\PrintCodeAndResultsPage}
674 % \begin{macrocode}
675 \newcommand{\PrintCodeAndResultsPage}{%
676 \nopagebreak[4]
677 \vspace*{0.5em}\par\noindent
678 \printlatexcode%
679 \demoresultprefix: Shown on the following page.
680 \newpage
681 \IfFileExists{\democodefile}{\input{\democodefile}}{}%
682 \newpage
683 }%
684 % \end{macrocode}
685 %
686 % \begin{macrocode}
687 } % end of \AtBeginDocument
688 % \end{macrocode}
689 % \end{macro}
690 %
691 %
692 % \iffalse
693 %</latexdemo.sty>
694 % \fi
695 %
696 % \Finale
697 \endinput
698