Debian Codegraph @

texmf-dist/source/latex/ijmart/ijmart.dtx

raw
1 % \iffalse
2 % $Id: ijmart.dtx,v 1.52 2013-06-25 03:33:52 boris Exp $
3 %
4 % Copyright 2007-2010, The Hebrew University Magnes Press
5 % This work may be distributed and/or modified under the
6 % conditions of the LaTeX Project Public License, either
7 % version 1.3 of this license or (at your option) any
8 % later version.
9 % The latest version of the license is in
10 % http://www.latex-project.org/lppl.txt
11 % and version 1.3 or later is part of all distributions of
12 % LaTeX version 2005/12/01 or later.
13 %
14 % This work has the LPPL maintenance status `maintained'.
15 %
16 % The Current Maintainer of this work is Boris Veytsman,
17 % <[email protected]>
18 %
19 % This work consists of the file ijmart.dtx and the
20 % derived file ijmart.cls
21 %
22 % \fi
23 % \CheckSum{861}
24 %
25 %
26 %% \CharacterTable
27 %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
28 %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
29 %% Digits \0\1\2\3\4\5\6\7\8\9
30 %% Exclamation \! Double quote \" Hash (number) \#
31 %% Dollar \$ Percent \% Ampersand \&
32 %% Acute accent \' Left paren \( Right paren \)
33 %% Asterisk \* Plus \+ Comma \,
34 %% Minus \- Point \. Solidus \/
35 %% Colon \: Semicolon \; Less than \<
36 %% Equals \= Greater than \> Question mark \?
37 %% Commercial at \@ Left bracket \[ Backslash \\
38 %% Right bracket \] Circumflex \^ Underscore \_
39 %% Grave accent \` Left brace \{ Vertical bar \|
40 %% Right brace \} Tilde \~}
41 %
42 %\iffalse
43 % Taken from xkeyval.dtx
44 %\fi
45 %\makeatletter
46 %\def\DescribeOption#1{\leavevmode\@bsphack
47 % \marginpar{\raggedleft\PrintDescribeOption{#1}}%
48 % \SpecialOptionIndex{#1}\@esphack\ignorespaces}
49 %\def\PrintDescribeOption#1{\strut\emph{option}\\\MacroFont #1\ }
50 %\def\SpecialOptionIndex#1{\@bsphack
51 % \index{#1\actualchar{\protect\ttfamily#1}
52 % (option)\encapchar usage}%
53 % \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
54 % usage}\@esphack}
55 %\def\DescribeOptions#1{\leavevmode\@bsphack
56 % \marginpar{\raggedleft\strut\emph{options}%
57 % \@for\@tempa:=#1\do{%
58 % \\\strut\MacroFont\@tempa\SpecialOptionIndex\@tempa
59 % }}\@esphack\ignorespaces}
60 %\makeatother
61 %
62 % \MakeShortVerb{|}
63 % \GetFileInfo{ijmart.dtx}
64 % \newcommand{\progname}[1]{\textsf{#1}}
65 % \title{\LaTeX{} Class for \emph{The Israel Journal of Mathematics}\thanks{\copyright 2007, The Hebrew University Magnes Press}}
66 % \author{Boris Veytsman\thanks{%
67 % \href{mailto:[email protected]}{\texttt{[email protected]}},
68 % \href{mailto:[email protected]}{\texttt{[email protected]}}}}
69 % \date{\filedate, \fileversion}
70 % \maketitle
71 % \begin{abstract}
72 % This package provides a class for typesetting articles for
73 % \emph{The Israel Journal of Mathematics}
74 % \end{abstract}
75 % \tableofcontents
76 %
77 % \clearpage
78 %
79 % \changes{v0.2}{2007/08/20}{First fully functional version}
80 % \changes{v0.3}{2007/08/23}{Documentation update}
81 % \changes{v1.0}{2007/09/03}{Documentation update}
82 % \changes{v1.1a}{2007/10/14}{Documentation update}
83 % \changes{v1.3}{2008/01/27}{Documented the use of qedhere and mqedhere}
84 % \changes{v1.6}{2010/10/28}{Documentation updates: illustrations and
85 % bibliography}
86 % \changes{v1.7}{2013/06/23}{Change in a sample file}
87 %
88 %\section{Introduction}
89 %\label{sec:intro}
90 %
91 % \emph{The Israel Journal of Mathematics} is published by \emph{The
92 % Hebrew University Magnes Press}. This class provides \LaTeX{}
93 % support for its authors and editors. It strives to achieve the
94 % distinct ``look and feel'' of the journal, while having the
95 % interface similar to the one of the \progname{amsart} document
96 % class~\cite{Downes04:amsart}. This will help the authors already
97 % familiar with \progname{amsart} to easily submit manuscripts for \emph{The
98 % Israel Journal of Mathematics} or to put the preprints in
99 % \url{http://www.arxiv.org} with minimal changes in the \LaTeX{}
100 % source.
101 %
102 % This goal determined the implementation approach. We load the
103 % \progname{amsart} class and redefine some of its internals on the fly. There
104 % are some additional commands added to support the features specific
105 % to the journal, but we aimed to keep their number minimal.
106 %
107 % An author well acquainted with AMS\LaTeX{} should find this package
108 % easy to use and configurable. The User Manual below illustrates the
109 % basic use of the class and discusses the differences with \progname{amsart}.
110 % For an in-depth tutorial of AMS\LaTeX{} I could recommend the
111 % excellent book~\cite{Graetzer00:MathIntoLaTeX}.
112 %
113 %
114 %\section{User's Guide}
115 %\label{sec:manual}
116 %
117 %
118 %\subsection{Installation}
119 %\label{sec:installation}
120 %
121 % The installation of the class follows the usual
122 % practice~\cite{TeXFAQ} for \LaTeX{} packages:
123 % \begin{enumerate}
124 % \item Run \progname{latex} on |ijmart.ins|. This will produce the file
125 % |ijmart.cls|.
126 % \item Put the files |ijmart.cls| and |ijmart.bst| to
127 % the places where \LaTeX{} and Bib\TeX{} can find them (see
128 % \cite{TeXFAQ} or the documentation for your \TeX{}
129 % system).\label{item:install}
130 % \item Update the database of file names. Again, see \cite{TeXFAQ}
131 % or the documentation for your \TeX{} system for the system-specific
132 % details.\label{item:update}
133 % \item The file |ijmart.pdf| provides the documentation for the
134 % package (this is the file you are probably reading now).
135 % \end{enumerate}
136 % As an alternative to items~\ref{item:install} and~\ref{item:update}
137 % you can just put the files in the working directory where your
138 % |.tex| file is.
139 %
140 %
141 % The class uses some other \LaTeX{} classes or packages. Most
142 % probably, they are already installed on your system. If not (or if
143 % their versions are very old), you need to download and
144 % install them. Here is the list:
145 % \begin{enumerate}
146 % \item \progname{amsart} class and related packages~\cite{Downes04:amsart},
147 % \item \progname{ifpdf} package~\cite{Oberdiek06:Ifpdf},
148 % \item \progname{fancyhdr} package~\cite{Oostrum04:Fancyhdr},
149 % \item \progname{lastpage} package~\cite{Goldberg94:Lastpage}.
150 % \end{enumerate}
151 %
152 %
153 %\subsection{Invocation}
154 %\label{sec:invocation}
155 %
156 % To use the class, put in the preamble of your document
157 % \begin{flushleft}
158 % |\documentclass[|\meta{options}|]{ijmart}|
159 % \end{flushleft}
160 % The class internally loads \progname{amsart}, so all facilities of
161 % \progname{amsart}~\cite{Graetzer00:MathIntoLaTeX, amsldoc} can be used in the
162 % source.
163 %
164 %
165 % \DescribeOption{french}
166 % Most of the options are just passed to
167 % \progname{amsart} (see~\cite{Graetzer00:MathIntoLaTeX, amsldoc} for their
168 % description). The class \progname{ijmart} adds one new option |french|. If
169 % it is chosen, some words in the top matter will be typeset in
170 % French. Note that this option does \emph{not} change the names of
171 % the table of contents and references. An author should also include
172 % a call, for example, to the Babel package~\cite{Braams05:Babel},
173 % which takes care of these and other details of international
174 % typesetting.
175 %
176 % If the author indeed chooses \progname{babel}, then the option
177 % |french| is passed to the package. Therefore the following works:
178 % \begin{verbatim}
179 % \documentclass[french]{ijmart}
180 % \usepackage{babel} % the french option is passed to the package
181 % \end{verbatim}
182 % Please note that \progname{babel} scans the global options first,
183 % but the main language of the document must be the last one.
184 % Therefore if the paper is written in French, but uses English
185 % quotations, the proper way to call \progname{babel} is the following:
186 % \begin{verbatim}
187 % \documentclass[french]{ijmart}
188 % \usepackage[english,french]{babel}
189 % \end{verbatim}
190 %
191 %
192 %
193 % By default \progname{babel} redefines French captions for figures
194 % and tables to use \textsc{Fig.} and \textsc{Tab.} correspondingly.
195 % If this is not
196 % acceptable, the authors should add to the preamble \emph{after} the
197 % call to \progname{babel} the following:
198 % \begin{verbatim}
199 % \addto\captionsfrench{%
200 % \renewcommand{\figurename}{Figure}%
201 % \renewcommand{\tablename}{Table}}%
202 % \end{verbatim}
203 %
204 % \DescribeOptions{draft,final}
205 % The options |draft| and |final| work in the same way as for
206 % \progname{amsart} and standard \LaTeX. If the option |draft| is
207 % chosen, the overfull lines are marked by black boxes on the margins
208 % \emph{and} the |\includegraphics| prints blank placeholders for the
209 % images. The option |final| (default) switches off the marking of
210 % overfull lines and restores the behavior of |\includegraphics|. To
211 % switch on just the overfull marks, without changing the behavior of
212 % |\includegraphics|, one can either explicitly pass the option final
213 % to \progname{graphics} package:
214 % \begin{verbatim}
215 % \documentclass[draft]{ijmart}
216 % \usepackage[final]{graphics}
217 % \end{verbatim}
218 % or add in the beginning of the document
219 % \begin{verbatim}
220 % \overfullrule=5pt
221 % \end{verbatim}
222 %
223 %
224 %
225 % \DescribeOptions{8pt,9pt,10pt,11pt,12pt}
226 % The size-changing options of \progname{amsart} class (|8pt|, |9pt|,
227 % \dots, |12pt|) have no effect other than producing a warning in the
228 % log since the journal is designed for
229 % only one type size (roughly corresponding to |10pt| of
230 % \progname{amsart}).
231 %
232 %
233 %
234 % The journal uses a special paper size. If you process the
235 % manuscript with \progname{pdflatex} to produce PDF output, the paper
236 % dimensions will be automatically set up by the class. However, if
237 % you use \progname{latex} and \progname{dvips}, you need to tell
238 % \progname{dvips} what paper size to choose. One way to do this is
239 % to add to the \progname{dvips} options the following:
240 % \begin{verbatim}
241 % -T 5.964in,8.844in -O -0in,0.1in
242 % \end{verbatim}
243 %
244 %
245 %\subsection{Top Matter}
246 %\label{sec:top_matter}
247 %
248 % Top matter contains the information about the paper: authors, title,
249 % affiliations, etc. The interface for \progname{ijmart} top matter is very
250 % close to the one used by \progname{amsart}. We added a couple of commands to
251 % deal with the information specific to the \emph{The Israel Journal of
252 % Mathematics} and changed the behavior of several other commands to
253 % suit the style of the journal. These changes are documented below.
254 %
255 % There are two kinds of top matter commands: the ones used primarily
256 % for authors and the ones used primarily for editors. We describe
257 % them separately.
258 %
259 %
260 %\subsubsection{Commands for Authors}
261 %\label{sec:authors_commands}
262 %
263 % \DescribeMacro{\title}
264 % The command |\title|, as in \progname{amsart} class, has two arguments: one
265 % optional, and one mandatory:
266 % \begin{flushleft}
267 % |\title[|\meta{ShortTitle}|]{|\meta{FullTitle}|}|
268 % \end{flushleft}
269 % The mandatory argument is the full title of the article. The
270 % optional argument, if present, defines the shorter version of the
271 % title for running heads. If the optional argument is absent, the
272 % full title is used instead. Note that the titles are typeset in
273 % upper case, but you do not need to input them in capital letters:
274 % the class does the conversion automatically.
275 %
276 % The optional argument should be used in two cases: when the full
277 % title is too long to fit in the running head, \emph{and} when the
278 % author wants to add a footnote or linebreaks to the title. Unlike
279 % \progname{amsart}, \progname{ijmart} allows the command |\thanks|
280 % inside |\title| and |\author| commands. However, the footnote
281 % belongs to the title typeset in the top matter, not to the running
282 % head version. The optional argument in this case helps, as in the
283 % following example:
284 % \begin{verbatim}
285 % \title[Some properties of $\sigma$-algebras]{%
286 % Some properties of $\sigma$-algebras\thanks{%
287 % The work was supported by grant from NSF No.~123456789-MMMM}}
288 % \end{verbatim}
289 % The line breaks in the title, if neccessary, are introduced by the
290 % command |\linebreak| in the second (mandatory) argument of |\title|:
291 % \begin{verbatim}
292 % \title[Title with line breaks]{Title \linebreak with line breaks}
293 % \end{verbatim}
294 %
295 %
296 %
297 %
298 % \DescribeMacro{\author} \DescribeMacro{\address}
299 % \DescribeMacro{\curraddr} \DescribeMacro{\email}
300 % \DescribeMacro{\urladdr} The interface for specifying the authors
301 % and their affiliations is close the the one of
302 % \progname{amsart}~\cite{instr-l} (and different from the standard \LaTeX).
303 % For each author a separate command |\author| should be used,
304 % followed by |\address| and (optionally) |\curraddr|, |\email| and
305 % |\urladdr|. The lines in the address should be divided by |\\|.
306 % Like the newer versions of \progname{amsart}, \progname{ijmart} does
307 % \emph{not}
308 % require the doubling of the |@| symbols in the e-mail addresses.
309 % The macro |\author| has two arguments, similarly to |\title|:
310 % \begin{flushleft}
311 % |\author[|\meta{AbbrevName}|]{|\meta{FullName}|}|
312 % \end{flushleft}
313 % The optional argument defines the shorter form of the author's name
314 % to be included in the running head. Similarly to |\title|, the
315 % command |\author| allows the use of |\thanks|. Again, to show that
316 % the footnote does not belong to the running head, the optional
317 % argument is used.
318 %
319 % \DescribeMacro{\shortauthors}
320 % In some cases the authors list may be too long for the running head,
321 % even if the abbreviated forms are used for each author. In this
322 % case it is possible to change the running head by a
323 % \emph{redefinition} of the command |\shortauthors|. This
324 % redefinition must be done after all |\author| commands, but before
325 % |\maketitle|:
326 % \begin{verbatim}
327 % \renewcommand{\shortauthors}{A.~Smith et al}
328 % \end{verbatim}
329 %
330 %
331 % \DescribeMacro{\thanks}
332 % As discussed above, the behavior of the |\thanks| command in
333 % \progname{ijmart} is different from the one in \progname{amsart}.
334 % This command is
335 % allowed within the scope of the top matter commands. If it is used
336 % in the scope of the main argument of the commands |\author| and
337 % |\title|, the optional argument should be used to correctly typeset
338 % the running heads.
339 %
340 % Sometimes it is necessary to have a |\thanks| footnote referring to
341 % more than one author. In this case the usual \LaTeX{} command
342 % |\footnotemark|\oarg{number} can help:
343 % \begin{verbatim}
344 % \author{A.~Uthor\thanks{The first and the third author were
345 % supported by NSA grant~123456789}
346 % \author{W.~Riter\thanks{The second author was supported by NSF
347 % grant~987654321}
348 % \author{C.~Orrespondent\footnotemark[1]}
349 % \address{Noname University\\ Nowhere, RI\\ USA}
350 % \email{[email protected], [email protected] and
351 % [email protected]}
352 % \end{verbatim}
353 %
354 % The command |\title| might have no more than one |\thanks| command
355 % in its scope.
356 %
357 % \DescribeEnv{abstract}
358 % The abstract of the paper must be put between |\begin{abstract}| and
359 % |\end{abstract}|. Note that to change the abstract name to
360 % R\'esum\'e, the authors should use Babel. Similarly to \progname{amsart}
361 % class, abstract must precede |\maketitle|.
362 %
363 % \DescribeMacro{\maketitle}
364 % The macro |\maketitle| typesets the top matter. All top matter
365 % information should be specified before this command.
366 %
367 % \DescribeMacro{\tableofcontents}
368 % \changes{v1.2}{2007/11/14}{Added documentation for table of contents
369 % formatting}
370 % The authors are encouraged to include |\tableofcontents| for long
371 % papers. By default only the sections are included in the table. If
372 % the authors wish to have a more detailed table of contents, they
373 % could change the counter |tocdepth|, for example:
374 % \begin{verbatim}
375 % \setcounter{tocdepth}{1} % The default: only sections are included
376 % \setcounter{tocdepth}{2} % Sections and subsections
377 % \setcounter{tocdepth}{3} % Sections, subsections and subsubsections
378 % ...
379 % \end{verbatim}
380 % If |tocdepth| is greater than the default value of 1, the formatting
381 % of the table of contents changes: the section entries then are
382 % typeset bold.
383 %
384 %
385 %\subsubsection{Commands for Editors}
386 %\label{sec:editors_commands}
387 %
388 % The commands described in this section should be used by the editors
389 % to insert the information about the published paper. They must be
390 % put before the |\maketitle| command.
391 %
392 % \DescribeMacro{\issueinfo}
393 % The command |\issueinfo| has the same format as in the \progname{amsart}
394 % document class:
395 % \begin{flushleft}
396 % |\issueinfo{|\meta{volume}|}{|\meta{number}|}{|\meta{month}|}{|\meta{year}|}|
397 % \end{flushleft}
398 % Note that at present the class uses only the first and the last
399 % arguments of this command (volume and year) for the actual typesetting.
400 % However, we keep the original format of this command, first, for
401 % compatibility reasons, and second, to facilitate a possible automatic
402 % processing of journal issues in the future.
403 %
404 % Example of this command:
405 % \begin{verbatim}
406 % \issueinfo{159}{1}{January}{2007}
407 % \end{verbatim}
408 %
409 %
410 % \DescribeMacro{\pagespan}
411 % The command |\pagespan| has two arguments, setting the first and the
412 % last page numbers of the article. If the last argument is empty, the last
413 % page number is calculated automatically. If the first argument is
414 % negative, the page numbering is done in Roman numerals, for example,
415 % for editorial materials. Here are examples of this command:
416 % \begin{verbatim}
417 % \pagespan{5}{15} % Explicit page span
418 % \pagespan{5}{} % The last page is calculated automatically
419 % \pagespan{-5}{} % Page numbers are Roman numerals v, vi, ...
420 % \pagespan{-5}{xx} % Page numbers are Roman numerals v, vi, ..., xx
421 % \end{verbatim}
422 %
423 % \DescribeMacro{\date}
424 % The command |\date| is used to put the editorial information
425 % about the manuscript, usually the date when the manuscript was
426 % received. For example:
427 % \begin{verbatim}
428 % \date{Received March 12, 2006 and in revised form December 6, 2006.}
429 % \end{verbatim}
430 %
431 % \DescribeMacro{\doiinfo}
432 % The command |\doiinfo| is used to specify the DOI number of the
433 % article, for example
434 % \begin{verbatim}
435 % \doiinfo{10.1007/s11856-007-0037-3}
436 % \end{verbatim}
437 %
438 %
439 %
440 %\subsection{Theorems, Lemmas, etc.}
441 % \label{sec:ijmthm_descr}
442 %
443 % \changes{v1.1}{2007/09/30}{Updated documentation for theorems}
444 %
445 % The class \progname{amsart} defines three theorem styles: |plain|,
446 % |remark| and |definition|. They are redefined by \progname{ijmart}
447 % to conform to the style of \emph{The Israel Jorunal of Mathematics.}
448 % Otherwise the usage of the theorem-like environments is the same as
449 % for \progname{amsart}. Note that \emph{The Israel Journal of
450 % Mathematics} usually recommends |definition| style for remarks,
451 % while |remark| style is used for steps, facts, cases, etc.
452 %
453 % \DescribeMacro{\qedhere}
454 % The environment |proof| has the same syntax and meaning as for
455 % \progname{amsart} package. According to the journal style, the QED
456 % symbol in proofs is not flushed left, like in \progname{amsart}, but
457 % is typeset at the last line of the proof at some distance from the
458 % text. If a proof ends by a nested environment, this might lead to
459 % an ugly position of the QED symbol. The command |\qedhere| inside a
460 % proof can be used to improve the situaiton\footnote{It is actually
461 % defined in \progname{amsart} too, but is not documented in the
462 % user's documentation there.}. It causes the immediate typesetting
463 % of the QED symbol and deletes the QED symbol at the end of the
464 % current proof. For example
465 % \begin{verbatim}
466 % \begin{proof}
467 % This proof ends by an enumerated list:
468 % \begin{enumerate}
469 % \item Item
470 % \item Item \qedhere
471 % \end{enumerate}
472 % \end{proof}
473 % \end{verbatim}
474 % Compare this to the similar code without |\qedhere|.
475 %
476 % The command |\qedhere| should be used if a proof ends by a math
477 % display:
478 % \begin{verbatim}
479 % \begin{proof}
480 % This proof ends by a displayed math:
481 % \begin{gather}
482 % a = b\\
483 % c = d\qedhere
484 % \end{gather}
485 % \end{proof}
486 % \end{verbatim}
487 % \DescribeMacro{\mqedhere}
488 % The exception is the |multline| environment, where the special
489 % version |\mqedhere| should be used:
490 % \begin{verbatim}
491 % \begin{proof}
492 % This proof ends with a multline:
493 % \begin{multline}
494 % a = b + c + d + e + f + g + h + i +\\
495 % j + k + l + m + n + o + p + q +\\
496 % r + s + t + u + v + w + x + y + z\mqedhere
497 % \end{multline}
498 % \end{proof}
499 % \end{verbatim}
500 %
501 %
502 % \DescribeEnv{namedprop}
503 % \DescribeEnv{namedprop*}
504 % Sometimes authors use non-standard names for their theorem-like
505 % propositions. The documentation~\cite{amsthdoc} recommends the use
506 % of |\newtheorem*|:
507 % \begin{verbatim}
508 % \newtheorem*{KL}{Klein's Lemma}
509 % \end{verbatim}
510 % However, if the number of such special environments is large enough,
511 % this might be too cumbersome. The package progname{ijmart} provides
512 % two environments, |namedprop| and |namedprop*| to define such
513 % these propositions on the fly.
514 %
515 % The environment |namedprop| is used for numbered named propositions
516 % (admittedly such propositions are less frequent than unnumbered
517 % ones). It has the following syntax:
518 % \begin{quote}
519 % |\begin{namedprop}|\marg{style}\marg{numbered-as}\marg{name}\oarg{note}\\
520 % \dots\\
521 % |\end{namedprop}|
522 % \end{quote}
523 % where |style| is the style of the proposition (|plain|, |remark|,
524 % etc.), |nmubered-as| is the name of (already defined) theorem-like
525 % environment, that shares the numbering with this proposition, |name|
526 % is the name to use instead of ``Theorem'', ``Lemma'', and |note| is
527 % the note after the heading. For example,
528 % \begin{verbatim}
529 % \begin{namedprop}{plain}{thm}{Klein's Lemma}[as restated in~\cite{a-l}]
530 % ...
531 % \end{namedprop}
532 % \end{verbatim}
533 %
534 % The nevironment |\namedprop*| is used for \emph{unnumbered} named
535 % propositions:
536 % \begin{quote}
537 % |\begin{namedprop*}|\marg{style}\marg{name}\oarg{note}\\
538 % \dots\\
539 % |\end{namedprop*}|
540 % \end{quote}
541 % For example,
542 % \begin{verbatim}
543 % \begin{namedprop*}{plain}{Klein's Lemma}[as restated in~\cite{a-l}]
544 % ...
545 % \end{namedprop*}
546 % \end{verbatim}
547 %
548 %
549 %\subsection{Bibliography}
550 %\label{sec:bilbio}
551 %
552 % The sample paper in the distribution shows the journal style for the
553 % list of references. For those authors who wish to use Bib\TeX, the
554 % style |ijmart.bst| is included in the distribution. It should be
555 % noted that the journal style requires full journal titles in
556 % references. Following MathSciNet
557 % (\url{http://www.ams.org/mathscinet/} conventions, the style
558 % correctly processes article entries with both |journal| and
559 % |fjournal| fields, for example
560 % \begin{verbatim}
561 % @article {MR2663320,
562 % AUTHOR = {Farkas, J. Z. and Green, D. M. and Hinow, P.},
563 % TITLE = {Semigroup analysis of structured parasite populations},
564 % JOURNAL = {Math. Model. Nat. Phenom.},
565 % FJOURNAL = {Mathematical Modelling of Natural Phenomena},
566 % VOLUME = {5},
567 % YEAR = {2010},
568 % NUMBER = {3},
569 % PAGES = {94--114},
570 % ISSN = {0973-5348},
571 % MRCLASS = {92D25 (35B35 35Q92 47D06 47N60)},
572 % MRNUMBER = {2663320},
573 % DOI = {10.1051/mmnp/20105307},
574 % URL = {http://dx.doi.org/10.1051/mmnp/20105307},
575 % }
576 % \end{verbatim}
577 % If an entry has only the |journal| field, it is used for the journal
578 % title. However, if the entry has also the |fjournal| field, the
579 % style assumes that this field contains the full (unabbreviated)
580 % title, and uses it for formatting bibliography.
581 %
582 %\subsection{Illustrations}
583 %\label{sec:illustrations}
584 %
585 % The authors can use the \progname{graphics}, \progname{graphicx},
586 % \progname{PSTricks}, \progname{pgf/tikz}, \progname{Metapost} or
587 % other tools to include illustrations
588 % (see~\cite{Goossens97:LateXGraphicsCompanion} for a comprehensive
589 % discussion of \LaTeX{} graphics possibilities).
590 %
591 % Note that the journal uses \progname{dvips} for internal processing.
592 % If the authors submit their illustrations in the PNG, JPEG of PDF
593 % formats, they are converted to the EPS format by the technical
594 % editors. Sometimes this conversion may lead to the loss of quality
595 % and resolution. Therefore the authors are advised to submit the
596 % illustrations in the EPS format.
597 %
598 %
599 % \StopEventually{%
600 % \clearpage
601 % \section{Acknowledgements}
602 % \label{sec:acks}
603 %
604 % I am grateful to the editorial staff of \emph{the Israel Journal of
605 % Mathematics} for the very careful copy editing of this manuscript
606 % and their patient explanations of the requirements of the journal.
607 %
608 % The Editors of the Journal and our Magnes colleagues wish to thank
609 % Professors Moshe Jarden and Gregory Cherlin for writing the original
610 % Journal package when the Journal came into the ownership of Magnes
611 % Press (in 1991). We would also like to thank Guy Jarden for his
612 % meticulous work, and for keeping the IJM package updated throughout
613 % the last 15 years.
614 %
615 % As a result of their efforts, the Journal was not only saved from
616 % extinction, but it has expanded and is considered a leader in its
617 % field. With the recent change in the production procedure to a more
618 % global format, we have moved to another program, building on the
619 % sturdy basis which they created.
620 %
621 % \bibliography{ijmart}
622 % \bibliographystyle{unsrt}}
623 %
624 % \clearpage
625 %
626 %
627 %\section{Implementation}
628 %\label{sec:impl}
629 %
630 %\subsection{Identification}
631 %\label{sec:ident}
632 %
633 % We start with the declaration who we are. Most |.dtx| files put
634 % driver code in a separate driver file |.drv|. We roll this code into the
635 % main file, and use the pseudo-guard |<gobble>| for it.
636 % \begin{macrocode}
637 %<class>\NeedsTeXFormat{LaTeX2e}
638 %<*gobble>
639 \ProvidesFile{ijmart.dtx}
640 %</gobble>
641 %<class>\ProvidesClass{ijmart}
642 [2013/06/23 v1.7 Typesetting articles for The Israel Journal of Mathematics]
643 % \end{macrocode}
644 %
645 % \begin{macro}{\@classname}
646 % \changes{v0.3}{2007/08/24}{Introduced macro}
647 % We also store the current class name in |\@classname|:
648 % \begin{macrocode}
649 %<class>\def\@classname{ijmart}%
650 % \end{macrocode}
651 %
652 % \end{macro}
653 %
654 %
655 % And the driver code:
656 % \begin{macrocode}
657 %<*gobble>
658 \documentclass{ltxdoc}
659 \usepackage{array}
660 \usepackage{url,amsfonts}
661 \usepackage[breaklinks,colorlinks,linkcolor=black,citecolor=black,
662 pagecolor=black,urlcolor=black,hyperindex=false]{hyperref}
663 \PageIndex
664 \CodelineIndex
665 \RecordChanges
666 \EnableCrossrefs
667 \begin{document}
668 \DocInput{ijmart.dtx}
669 \end{document}
670 %</gobble>
671 %<*class>
672 % \end{macrocode}
673 %
674 %
675 %\subsection{Options}
676 %\label{sec:options}
677 %
678 % \begin{macro}{\ifijm@french}
679 % First, the language option. We do not know whether the author
680 % chooses to use \progname{babel}, so we define it in the way, which
681 % is compatible with \progname{babel}, but works without it too.
682 % \begin{macrocode}
683 \newif\ifijm@french
684 \ijm@frenchfalse
685 \DeclareOption{french}{\ijm@frenchtrue}
686 % \end{macrocode}
687 % \end{macro}
688 %
689 % The size-changing options produce a warning:
690 % \begin{macrocode}
691 \long\def\ijm@size@warning#1{%
692 \ClassWarning{\@classname}{Size-changing option #1 will not be
693 honored}}%
694 \DeclareOption{8pt}{\ijm@size@warning{\CurrentOption}}%
695 \DeclareOption{9pt}{\ijm@size@warning{\CurrentOption}}%
696 \DeclareOption{10pt}{\ijm@size@warning{\CurrentOption}}%
697 \DeclareOption{11pt}{\ijm@size@warning{\CurrentOption}}%
698 \DeclareOption{12pt}{\ijm@size@warning{\CurrentOption}}%
699 % \end{macrocode}
700 %
701 %
702 %
703 % All other options are passed to \progname{amsart}:
704 % \begin{macrocode}
705 \DeclareOption*{\PassOptionsToClass{\CurrentOption}{amsart}}
706 % \end{macrocode}
707 %
708 % Now we read the configuration file
709 % \begin{macrocode}
710 \InputIfFileExists{ijmart.cfg}{%
711 \ClassInfo{ijmart}{%
712 Loading configuration file ijmart.cfg}}{%
713 \ClassInfo{ijmart}{%
714 Configuration file ijmart.cfg is not found}}
715 % \end{macrocode}
716 % And process the options:
717 % \begin{macrocode}
718 \ProcessOptions\relax
719 % \end{macrocode}
720 %
721 %
722 %\subsection{Loading Class and Packages}
723 %\label{sec:loading}
724 %
725 % We start with the base class
726 % \begin{macrocode}
727 \PassOptionsToClass{10pt}{amsart}
728 \LoadClass{amsart}
729 % \end{macrocode}
730 %
731 % A bunch of packages:
732 % \begin{macrocode}
733 \RequirePackage{ifpdf, fancyhdr, lastpage}
734 % \end{macrocode}
735 %
736 %\subsection{Fonts}
737 %\label{sec:fonts}
738 %
739 % The \progname{amsart} class defines several options for different
740 % font sizes (10pt, 11pt, etc). We have just one design size for the
741 % articles corresponding to the 10pt option of \progname{amsart}, but
742 % with larger |\baselineskip|.
743 %
744 % \begin{macro}{\@typesizes}
745 % \changes{v0.3}{2007/08/23}{Redefined \progname{amsart} defaults}
746 % The font information in \progname{amsart} is stored in
747 % |\@typesizes| macro. It has 11 typesizes: 5 below and 5 above
748 % |\normalsize| .
749 % \begin{macrocode}
750 \def\@typesizes{%
751 \or{5}{7}\or{6}{8}\or{7}{9}\or{8}{11.2}\or{9}{12.6}%
752 \or{10}{14}% normalsize
753 \or{\@xipt}{15}\or{\@xiipt}{16.8}\or{\@xivpt}{19.8}%
754 \or{\@xviipt}{23.3}\or{\@xxpt}{28}}%
755 \normalsize \linespacing=\baselineskip
756 % \end{macrocode}
757 % \end{macro}
758 %
759 %
760 %
761 %\subsection{Page Dimensions and Paragraphing}
762 %\label{sec:page}
763 %
764 % \begin{macro}{\paperheight}
765 % \begin{macro}{\paperwidth}
766 % The journal has rather narrow pages:
767 % \begin{macrocode}
768 \setlength{\paperheight}{636.77bp}
769 \setlength{\paperwidth}{429.41bp}
770 % \end{macrocode}
771 % \end{macro}
772 % \end{macro}
773 % \begin{macro}{\pdfpaperheight}
774 % \begin{macro}{\pdfpaperwidth}
775 % \begin{macro}{\pdfvorigin}
776 % \begin{macro}{\pdfhorigin}
777 % \changes{v0.3}{2007/08/23}{Changed offsets}
778 % \changes{v0.4}{2007/09/02}{Changed offsets}
779 % If we deal with \progname{pdftex}, we can use this information more
780 % creatively. This was inspired by
781 % \progname{memoir}~\cite{Wilson04:Memoir}.
782 % \begin{macrocode}
783 \ifpdf\relax
784 \pdfpageheight=\paperheight
785 \pdfpagewidth=\paperwidth
786 \pdfvorigin=0.9in
787 \pdfhorigin=1in
788 \fi
789 % \end{macrocode}
790 % \end{macro}
791 % \end{macro}
792 % \end{macro}
793 % \end{macro}
794 %
795 % \begin{macro}{\headheight}
796 % We leave generous header space:
797 % \begin{macrocode}
798 \setlength{\headheight}{32pt}
799 % \end{macrocode}
800 %
801 % \end{macro}
802 %
803 % \begin{macro}{\footskip}
804 % \changes{v0.3}{2007/08/23}{Redefined}
805 % \changes{v0.4}{2007/09/02}{Changed}
806 % The footer is slightly larger than in \progname{amsart}
807 % \begin{macrocode}
808 \setlength{\footskip}{42pt}%
809 % \end{macrocode}
810 % \end{macro}
811 %
812 %
813 %
814 % \begin{macro}{\topmargin}
815 % The top margin is 50 bp:
816 % \changes{v0.4}{2007/09/02}{Changed offsets}
817 % \begin{macrocode}
818 \setlength\topmargin{50bp}
819 \addtolength\topmargin{-0.9in}
820 \addtolength\topmargin{-\topskip}
821 \addtolength\topmargin{-\headsep}
822 \@settopoint\topmargin
823 % \end{macrocode}
824 % \end{macro}
825 % \begin{macro}{\textheight}
826 % \changes{v0.4}{2007/09/02}{Changed}
827 % This code is similar to the one in~\cite{classes}. |\textheight|
828 % is the height of the text including footnotes, but excluding
829 % running head and foot. We start with |\paperheight| and subtract
830 % margins, running heads and foots:
831 % \begin{macrocode}
832 \setlength\@tempdima{\paperheight}
833 \addtolength\@tempdima{-\topmargin}
834 \addtolength\@tempdima{-26bp} % Bottom margin
835 \addtolength\@tempdima{-\headheight}
836 \addtolength\@tempdima{-\headsep}
837 \addtolength\@tempdima{-\footskip}
838 \addtolength\@tempdima{-1in}
839 % \end{macrocode}
840 % We want this length to contain an integer number of lines:
841 % \begin{macrocode}
842 \divide\@tempdima\baselineskip
843 \@tempcnta=\@tempdima
844 \setlength\textheight{\@tempcnta\baselineskip}
845 % \end{macrocode}
846 % Now we take care of the first line height:
847 % \begin{macrocode}
848 \addtolength\textheight{\topskip}
849 % \end{macrocode}
850 % \end{macro}
851 %
852 % \begin{macro}{\evensidemargin}
853 % \begin{macro}{\oddsidemargin}
854 % The margins on even and odd pages are 43 bp:
855 % \begin{macrocode}
856 \setlength\evensidemargin{43bp}
857 \addtolength{\evensidemargin}{-1in}
858 \setlength\oddsidemargin{43bp}
859 \addtolength{\oddsidemargin}{-1in}
860 % \end{macrocode}
861 % \end{macro}
862 % \end{macro}
863 % \begin{macro}{\textwidth}
864 % The way to set up the right margin is slightly different:
865 % \begin{macrocode}
866 \setlength\textwidth{\paperwidth}
867 \addtolength{\textwidth}{-1in}
868 \addtolength\textwidth{-\evensidemargin}
869 \addtolength\textwidth{-43bp} % right margin
870 \@settopoint\textwidth
871 % \end{macrocode}
872 % \end{macro}
873 %
874 % \begin{macro}{\parindent}
875 % The paragraph indentation is 1em:
876 % \begin{macrocode}
877 \setlength\parindent{1em}
878 % \end{macrocode}
879 % \end{macro}
880 %
881 %
882 %
883 %
884 %\subsection{Headers}
885 %\label{sec:headers}
886 %
887 %
888 % \begin{macro}{\headrulewidth}
889 % \begin{macro}{\footrulewidth}
890 % We do not want decorative rules in the journal:
891 % \begin{macrocode}
892 \renewcommand{\headrulewidth}{0pt}
893 \renewcommand{\footrulewidth}{0pt}
894 % \end{macrocode}
895 % \end{macro}
896 % \end{macro}
897 %
898 % It is easy to set up headers with \progname{fancyhdr}:
899 % \begin{macrocode}
900 \pagestyle{fancy}
901 \fancyhead[LO]{\footnotesize Vol.~\currentvolume, \currentyear}
902 \fancyhead[CO]{\footnotesize\shorttitle}
903 \fancyhead[RO]{\footnotesize\thepage}
904 \fancyhead[LE]{\footnotesize\thepage}
905 \fancyhead[CE]{\footnotesize\shortauthors}
906 \fancyhead[RE]{\footnotesize Isr. J. Math.}
907 \fancyfoot{}
908 % \end{macrocode}
909 %
910 % The first page has the special headers. The style |firstpage| is
911 % invoked by \progname{amsart}; here we just redefine it.
912 % \begin{macrocode}
913 \fancypagestyle{firstpage}{%
914 \fancyhf{}%
915 \chead{\tiny%
916 ISRAEL JOURNAL OF MATHEMATICS \textbf{\currentvolume}
917 (\currentyear),
918 \start@page--\end@page\\[0.5ex]
919 DOI: \@doiinfo}%
920 \cfoot{\thepage}}%
921 % \end{macrocode}
922 %
923 %\subsection{Top Matter Macros}
924 %\label{sec:top_matter_code}
925 %
926 % Most top matter macros are defined in \progname{amsart}. Here we
927 % just add some new macros and redefine some.
928 %
929 % \begin{macro}{\author}
930 % The macro |\author| provided by \progname{amsart} is almost what
931 % we need. ``Almost'' because we want to add author's name(s) to
932 % the address list to typeset them together.
933 %
934 % Another note: \progname{amsart} stores the list of all authors in
935 % the macro |\authors|. We need it now only to check whether the
936 % list is empty
937 % \begin{macrocode}
938 \renewcommand{\author}[2][]{%
939 \ifx\@empty\authors
940 \gdef\authors{#2}%
941 \gdef\addresses{\author{#2}}%
942 \else
943 \g@addto@macro\authors{\and#2}%
944 \g@addto@macro\addresses{\and\author{#2}}%
945 \fi
946 \def\@tempa{#1}%
947 \ifx\@tempa\@empty\relax
948 \ifx\@empty\shortauthors
949 \gdef\shortauthors{#2}%
950 \else
951 \g@addto@macro\shortauthors{\and#2}%
952 \fi
953 \else
954 \ifx\@empty\shortauthors
955 \gdef\shortauthors{#1}%
956 \else
957 \g@addto@macro\shortauthors{\and#1}%
958 \fi
959 \fi
960 }%
961 % \end{macrocode}
962 %
963 %
964 % \end{macro}
965 %
966 %
967 % \begin{macro}{abstract}
968 % \changes{v0.3}{2007/08/23}{Changed spacing}
969 % The following code is mostly from~\cite{Downes04:amsart} with the
970 % changes due to our style. The comments are mostly from the same
971 % source.
972 %
973 % {\itshape In AMS-derived document classes, the abstract should be placed
974 % before |\maketitle| (otherwise the desired ordering of frontmatter
975 % elements cannot be ensured in all cases).}
976 % \begin{macrocode}
977 \newbox\abstractbox
978 % \end{macrocode}
979 % {\itshape We start by checking whether |\maketitle| has already been used
980 % (in which case it was reset to \cs{relax}); if so, we give a
981 % warning that the abstract should be placed before |\maketitle|.}
982 % \begin{macrocode}
983 \renewenvironment{abstract}{%
984 \ifx\maketitle\relax
985 \ClassWarning{\@classname}{Abstract should precede
986 \protect\maketitle\space in AMS-derived document classes; reported}%
987 \fi
988 \global\setbox\abstractbox=\vtop \bgroup
989 \vglue 10pt plus 6pt minus 6pt%
990 \normalfont\tiny
991 \centering\MakeUppercase{\abstractname}\par%
992 \Small
993 \list{}{\labelwidth\z@
994 \leftmargin3pc \rightmargin\leftmargin
995 \listparindent\normalparindent \itemindent\z@
996 \parsep\z@ \@plus\p@
997 % \end{macrocode}
998 % {\itshape In order to get equation numbers indented with the rest of the
999 % abstract, we have to do this:}
1000 % \begin{macrocode}
1001 \let\fullwidthdisplay\relax
1002 }%
1003 \item[]%
1004 }{%
1005 \vspace*{-10pt}
1006 \endlist\egroup
1007 % \end{macrocode}
1008 % {\itshape If the abstract was supposed to be typeset earlier, then
1009 % \cs{@setabstract} is now equal to \cs{relax}, and we had better
1010 % drop the contents of the abstract box onto the page immediately, to
1011 % salvage the situation as best we can.}
1012 % \begin{macrocode}
1013 \ifx\@setabstract\relax \@setabstracta \fi
1014 }%
1015 % \end{macrocode}
1016 %
1017 % \end{macro}
1018 %
1019 %
1020 % \begin{macro}{\pagespan}
1021 % This macro is different from the one provided by \progname{amsart}
1022 % because we want to have the option of automatic calculation of the
1023 % last page number.
1024 % \begin{macrocode}
1025 \def\pagespan#1#2{\pagenumbering{arabic}\setcounter{page}{#1}%
1026 \def\start@page{#1}%
1027 \ifnum\c@page<\z@ \pagenumbering{roman}\setcounter{page}{-#1}%
1028 \def\start@page{\romannumeral#1}%
1029 \fi%
1030 \def\@tempa{#2}%
1031 \ifx\@tempa\@empty\def\end@page{\pageref{LastPage}}%
1032 \else\def\end@page{#2}\fi}
1033 \pagespan{1}{}
1034 % \end{macrocode}
1035 % \end{macro}
1036 %
1037 % \begin{macro}{\doiinfo}
1038 % This is the doi number of the article:
1039 % \begin{macrocode}
1040 \def\doiinfo#1{\gdef\@doiinfo{#1}}
1041 \doiinfo{10.1007/s000000000000000000000000}
1042 % \end{macrocode}
1043 % \end{macro}
1044 %
1045 %
1046 % \begin{macro}{\thanks}
1047 % \changes{v0.3}{2007/08/23}{Changed size}
1048 % The macro |\thanks| is redefined in \progname{amsart}. Here is
1049 % the adapted original definition from the \LaTeX{} kernel. Note
1050 % that the footnotes on the title page are typeset in |\small| size,
1051 % rather than in |\footnotesize|.
1052 % \begin{macrocode}
1053 \def\thanks#1{\footnotemark
1054 \protected@xdef\thankses{\thankses
1055 \protect\footnotetext[\the\c@footnote]{\small#1}}%
1056 }
1057 \let\@thanks\@empty
1058 % \end{macrocode}
1059 %
1060 % \end{macro}
1061 %
1062 %\subsection{Typesetting Top Matter}
1063 %\label{sec:maketitle}
1064 %
1065 %
1066 % \begin{macro}{\@maketitle@hook}
1067 % \changes{v0.3}{2007/08/23}{Changed footnotes formatting}
1068 % \changes{v1.0}{2007/09/03}{Deleted rlap from footnotemark}
1069 % The |\@maketitle@hook| is called by |\maketitle| in
1070 % \progname{amsart}. We use it to a number of redefinitions.
1071 % \begin{macrocode}
1072 \def\@maketitle@hook{%
1073 % \end{macrocode}
1074 % At this point we collected all authors in |\shortauthors|, so we
1075 % can uppercase it:
1076 % \begin{macrocode}
1077 \uppercasenonmath\shortauthors
1078 % \end{macrocode}
1079 %
1080 % The footnote numbering on the title page is rather interesting. It
1081 % is $\ast$, then $\ast\ast$, then $\dagger$, then $\dagger\dagger$,
1082 % etc.
1083 % \begin{macrocode}
1084 \renewcommand\thefootnote{\ifcase\c@footnote\relax
1085 \or\@fnsymbol{1}%
1086 \or\@fnsymbol{1}\@fnsymbol{1}%
1087 \or\@fnsymbol{2}%
1088 \or\@fnsymbol{2}\@fnsymbol{2}%
1089 \or\@fnsymbol{3}%
1090 \or\@fnsymbol{3}\@fnsymbol{3}%
1091 \or\@fnsymbol{4}%
1092 \or\@fnsymbol{4}\@fnsymbol{4}%
1093 \or\@fnsymbol{5}%
1094 \or\@fnsymbol{5}\@fnsymbol{5}%
1095 \or\@fnsymbol{6}%
1096 \or\@fnsymbol{6}\@fnsymbol{6}%
1097 \fi}%
1098 \def\@makefnmark{\@textsuperscript{\normalfont\@thefnmark}}%
1099 \long\def\@makefntext##1{\noindent\hangindent=2em\hangafter=1
1100 \hb@xt@2em{%
1101 \hss\@textsuperscript{\normalfont\footnotesize\@thefnmark\space}}##1}%
1102 \def\footnoterule{\kern-3pt\hrule width 2in\kern 2.6pt}
1103 \setcounter{footnote}{0}%
1104 }%
1105 % \end{macrocode}
1106 % \end{macro}
1107 %
1108 %
1109 % \begin{macro}{\@adminfootnotes}
1110 % \progname{amsart} typesets the footnotes \emph{before} typesetting
1111 % the authors and title. Since we form the footnotes later, we must
1112 % delay this till the end of the top matter:
1113 % \begin{macrocode}
1114 \def\@adminfootnotes{}%
1115 % \end{macrocode}
1116 %
1117 % \end{macro}
1118 %
1119 % \begin{macro}{\andify}
1120 % In the US the common style for lists is ``Tom, Dick, and Harry''.
1121 % It is hard-coded into \progname{amsart}. However, our journal
1122 % style is ``Tom, Dick and Harry'' (is it the British usage?).
1123 % Therefore we need to redefine the function |\andify|:
1124 % \begin{macrocode}
1125 \renewcommand{\andify}{%
1126 \nxandlist{\unskip, }{\unskip{} \@@and~}{\unskip{} \@@and~}}
1127 % \end{macrocode}
1128 %
1129 % \end{macro}
1130 %
1131 % \begin{macro}{\@@and}
1132 % Normally the macro |\@@and| is expanded just to 'and'. However,
1133 % if |french| option is selected, we want the french version:
1134 % \begin{macrocode}
1135 \def\@@and{AND}
1136 \ifijm@french\def\@@and{ET}\fi
1137 % \end{macrocode}
1138 % \end{macro}
1139 % \begin{macro}{\@@by}
1140 % Same with |\@@by|:
1141 % \begin{macrocode}
1142 \def\@@by{BY}
1143 \ifijm@french\def\@@by{PAR}\fi
1144 % \end{macrocode}
1145 % \end{macro}
1146 %
1147 % \begin{macro}{\curraddrname}
1148 % \begin{macro}{\emailaddrname}
1149 % \begin{macro}{\urladdrname}
1150 % The keywords for the specific parts of the address (e-mail,
1151 % current address, etc.) depend on the language chosen.
1152 % \begin{macrocode}
1153 \def\curraddrname{Current address:}%
1154 \def\emailaddrname{e-mail:}%
1155 \def\urladdrname{URL:}%
1156 \ifijm@french
1157 \def\curraddrname{Adresse actuelle:}%
1158 \def\emailaddrname{courriel:}%
1159 \fi
1160 % \end{macrocode}
1161 %
1162 % \end{macro}
1163 % \end{macro}
1164 % \end{macro}
1165 %
1166 %
1167 % \begin{macro}{\@settitle}
1168 % The title is set in large font uppercase. There is a problem,
1169 % however: uppercasing title means uppercasing \emph{everything},
1170 % including thanks! We solve this problem in the following way: we
1171 % typeset the title twice, once invisibly in the lowercase, and
1172 % again in uppercase, but without typesetting the footnote text.
1173 % \begin{macrocode}
1174 \def\@settitle{%
1175 \begin{center}%
1176 \makebox[0pt]{\hphantom{\@title}}%
1177 \def\thanks##1{\addtocounter{footnote}{-1}\footnotemark}%
1178 \uppercasenonmath\@title
1179 \Large\baselineskip=14pt\lineskiplimit=2pt\lineskip=2pt\@title%
1180 \end{center}}%
1181 % \end{macrocode}
1182 % \end{macro}
1183 %
1184 %
1185 % \begin{macro}{\@setauthors}
1186 % While we call this macro |\@setauthors|, in fact it is setting the
1187 % names \emph{and} addresses of the authors.
1188 %
1189 % The authors' block is centered:
1190 % \begin{macrocode}
1191 \def\@setauthors{\vglue 21pt plus 6pt minus 3pt%
1192 \begin{center}%
1193 % \end{macrocode}
1194 %
1195 % We need to properly treat the current address, e-mail and URL of the
1196 % authors. Note that \progname{amsart} uses an optional first
1197 % argument to these macros; we silently drop it.
1198 % \begin{macrocode}
1199 \def\curraddr##1##2{\begingroup
1200 \@ifnotempty{##2}{\par\curraddrname{}\par
1201 ##2\par}\endgroup}%
1202 \def\email##1##2{\begingroup
1203 \@ifnotempty{##2}{\par\emailaddrname{}~%
1204 ##2\par}\endgroup}%
1205 \def\urladdr##1##2{\begingroup
1206 \@ifnotempty{##2}{\par\urladdrname{}~%
1207 ##2\par}\endgroup}%
1208 % \end{macrocode}
1209 %
1210 % We print the word ``by'' only if there is at least one author.
1211 % I am not sure how it can be that a manuscript has no authors, but
1212 % has addresses defined. Maybe official editorial?
1213 % \begin{macrocode}
1214 \if\authors\@empty\relax\else{\normalfont\tiny\@@by}\par\medskip
1215 % \end{macrocode}
1216 % The authors are typeset in small caps:
1217 % \begin{macrocode}
1218 \def\author##1{{\normalsize\scshape##1}\par\medskip}
1219 % \end{macrocode}
1220 % The keyword ``and'' is typeset like ``by'' with large skip:
1221 % \begin{macrocode}
1222 \def\and{\par\bigskip{\normalfont\tiny\@@and}\par\medskip}
1223 % \end{macrocode}
1224 % And everything else is typeset in italics:
1225 % \begin{macrocode}
1226 \small\itshape\addresses
1227 % \end{macrocode}
1228 % \begin{macrocode}
1229 \end{center}}%
1230 % \end{macrocode}
1231 % \end{macro}
1232 %
1233 %
1234 % \begin{macro}{\@maketitle}
1235 % \changes{v0.3}{2007/08/23}{Changed size for date}
1236 % We typeset footnotes at the end of the top matter typesetting.
1237 % Note the larger type size for the |\@date| footnote.
1238 % \begin{macrocode}
1239 \let\@origmaketitle=\@maketitle
1240 \def\@maketitle{\@origmaketitle
1241 \thankses
1242 \ifx\@date\@empty\else
1243 \def\thefootnote{}%
1244 \footnotetext{\small\@date}\fi%
1245 \gdef\thefootnote{\@arabic\c@footnote}}
1246 % \end{macrocode}
1247 % \end{macro}
1248 %
1249 % \begin{macro}{\enddoc@text}
1250 % In \progname{amsart} the macro |\enddoc@text| typesets addresses
1251 % at the end of the document. We do not need it:
1252 % \begin{macrocode}
1253 \def\enddoc@text{}
1254 % \end{macrocode}
1255 % \end{macro}
1256 %
1257 %
1258 %
1259 %\subsection{Table of Contents}
1260 %\label{sec:toc}
1261 % By default we include in the table of contents only sections:
1262 % \begin{macrocode}
1263 \setcounter{tocdepth}{1}
1264 % \end{macrocode}
1265 % \begin{macro}{\contentsnamefont}
1266 % The table of contents is typeset smaller than in
1267 % \progname{amsart}:
1268 % \begin{macrocode}
1269 \renewcommand\contentsnamefont{\scshape\footnotesize}
1270 % \end{macrocode}
1271 % \end{macro}
1272 %
1273 % \begin{macro}{\@starttoc}
1274 % \changes{v1.2}{2007/11/15}{Redefined}
1275 % \changes{v1.5}{2010/03/02}{Added |\makeatletter| to make compatible
1276 % with |babel|}
1277 % We also rewrite |\@starttoc| to make the type smaller. The
1278 % comments are again from \progname{amsart}:
1279 % \begin{macrocode}
1280 \def\@starttoc#1#2{\begingroup
1281 \setTrue{#1}%
1282 % \end{macrocode}
1283 % {\itshape Remove the skip after the abstract so that we can
1284 % substitute another.}
1285 % \begin{macrocode}
1286 \par\removelastskip\vskip\z@skip
1287 % \end{macrocode}
1288 % {\itshape The first two arguments of \cs{@startsection} here are
1289 % special values
1290 % that cause different internal branches to be taken.}
1291 %\begin{verbatim}
1292 % Arguments: {} = name = empty
1293 % \@M = no number should be used and no table of contents entry
1294 % \z@ = indent amount
1295 % 12pt + 12pt = vskip before
1296 % 6pt = vskip after
1297 % \centering\contentsnamefont = format
1298 %\end{verbatim}
1299 % \begin{macrocode}
1300 \@startsection{}\@M\z@{\linespacing\@plus\linespacing}%
1301 {.5\linespacing}{\centering\contentsnamefont}{#2}%
1302 % \end{macrocode}
1303 % {\itshape If we have a list of figures or list of tables we want to put
1304 % them in the main table of contents, but we don't want to put an
1305 % entry there for the main table of contents itself. So we check
1306 % to see if argument 2 is |\contentsname| and if it is then
1307 % we refrain from doing |\addcontentsline|.}
1308 % \begin{macrocode}
1309 \ifx\contentsname#2%
1310 \else \addcontentsline{toc}{section}{#2}\fi
1311 % \end{macrocode}
1312 % We want the table of contents to have the same width as the abstract
1313 % \begin{macrocode}
1314 \list{}{\labelwidth\z@
1315 \leftmargin2.4pc \rightmargin\leftmargin
1316 \listparindent\z@ \itemindent\z@
1317 \parsep\z@ \@plus\p@}%
1318 \item[]\makeatletter%
1319 \small\@input{\jobname.#1}\endlist%
1320 \if@filesw
1321 \@xp\newwrite\csname tf@#1\endcsname
1322 \immediate\@xp\openout\csname tf@#1\endcsname \jobname.#1\relax
1323 \fi
1324 \global\@nobreakfalse \endgroup
1325 \addvspace{32\p@\@plus14\p@}%
1326 \let\tableofcontents\relax
1327 }%
1328 % \end{macrocode}
1329 % \end{macro}
1330 %
1331 % \begin{macro}{\@dotsep}
1332 % Separation between the dots for table of contents:
1333 % \begin{macrocode}
1334 \newcommand\@dotsep{4.5}
1335 % \end{macrocode}
1336 %
1337 % \end{macro}
1338 %
1339 % \begin{macro}{\@tocline}
1340 % We want dots in the table of contents\dots
1341 % \begin{macrocode}
1342 \def\@tocline#1#2#3#4#5#6#7{\relax
1343 \ifnum #1>\c@tocdepth % then omit
1344 \else
1345 \par \addpenalty\@secpenalty\addvspace{#2}%
1346 \begingroup \hyphenpenalty\@M
1347 \@ifempty{#4}{%
1348 \@tempdima\csname r@tocindent\number#1\endcsname\relax
1349 }{%
1350 \@tempdima#4\relax
1351 }%
1352 \parindent\z@ \leftskip#3\relax \advance\leftskip\@tempdima\relax
1353 \rightskip\@pnumwidth plus4em \parfillskip-\@pnumwidth
1354 #5\leavevmode\hskip-\@tempdima #6\nobreak\relax
1355 \leaders\hbox{$\m@th
1356 \mkern \@dotsep mu\hbox{.}\mkern \@dotsep
1357 mu$}\hfill
1358 \hbox to\@pnumwidth{\@tocpagenum{#7}}\par
1359 \nobreak
1360 \endgroup
1361 \fi}%
1362 % \end{macrocode}
1363 % \end{macro}
1364 %
1365 %
1366 % \begin{macro}{\l@section}
1367 % \changes{v1.2}{2007/11/15}{Redefined to check whether subsections
1368 % are present}
1369 % The actual formatting of section entries depend whether
1370 % subsections are included in toc. If yes, the sections are bold.
1371 % \begin{macrocode}
1372 \def\l@section{%
1373 \@tocline{1}{0pt}{1pc}{}{%
1374 \ifnum\c@tocdepth>1\bfseries\fi}}
1375 % \end{macrocode}
1376 % \end{macro}
1377 %
1378 % \begin{macro}{\l@subsection}
1379 % \begin{macro}{\l@subsubsection}
1380 % \changes{v1.2}{2007/11/14}{Added indentation}
1381 % \changes{v1.3}{2008/02/12}{Changed indentation}
1382 % These entries are indented.
1383 % \begin{macrocode}
1384 \def\l@subsection{\@tocline{2}{0pt}{2.8pc}{}{}}
1385 \def\l@subsubsection{\@tocline{3}{0pt}{4.6pc}{}{}}
1386 % \end{macrocode}
1387 % \end{macro}
1388 % \end{macro}
1389 %
1390 %
1391 %
1392 %\subsection{Captions}
1393 %\label{sec:captions}
1394 %
1395 % \begin{macro}{\@captionheadfont}
1396 % \changes{v0.3}{2007/08/23}{Redefined}
1397 % The captions in \progname{amsart} are in small caps. In this
1398 % journal they are not:
1399 % \begin{macrocode}
1400 \def\@captionheadfont{\normalfont}
1401 % \end{macrocode}
1402 %
1403 % \end{macro}
1404 %
1405 %\subsection{Sectioning}
1406 %\label{sec:sections}
1407 %
1408 % \begin{macro}{\@secnumfont}
1409 % It is possible in \progname{amsart} to have section numbers in the
1410 % font different from the title font. We do not want this:
1411 % \begin{macrocode}
1412 \let\@secnumfont\@empty
1413 % \end{macrocode}
1414 %
1415 % \end{macro}
1416 %
1417 % Now we redefine sections. The arguments of the |\@startsection|
1418 % commands are
1419 %\begin{verbatim}
1420 % #1 #2 #3 #4 #5 #6
1421 % {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}
1422 %\end{verbatim}
1423 %
1424 % \begin{macro}{\section}
1425 % Most sections are not centered, unlike \progname{amsart} ones:
1426 % \begin{macrocode}
1427 \def\section{\@startsection{section}{1}%
1428 \z@{20pt plus 4pt minus 4pt}{0.5\linespacing}%
1429 {\normalfont\bfseries}}%
1430 % \end{macrocode}
1431 % \end{macro}
1432 %
1433 %
1434 % \begin{macro}{\centeredsection}
1435 % \changes{v0.3}{2007/08/23}{Added macro}
1436 % However, there are special centered sections, for example,
1437 % ``References'':
1438 % \begin{macrocode}
1439 \def\centeredsection{\@startsection{section}{1}%
1440 \z@{20pt plus 4pt minus 4pt}{0.5\linespacing}%
1441 {\normalfont\bfseries\centering}}%
1442 % \end{macrocode}
1443 % \end{macro}
1444 %
1445 % \begin{macro}{\subsection}
1446 % Subsections are in small caps on the line with text.
1447 % \begin{macrocode}
1448 \def\subsection{\@startsection{subsection}{2}%
1449 \z@{.5\linespacing\@plus.7\linespacing}{-0.5em}%
1450 {\normalfont\scshape}}%
1451 % \end{macrocode}
1452 % \end{macro}
1453 %
1454 % \begin{macro}{\subsubsection}
1455 % Subsubsection heads are in italics
1456 % \begin{macrocode}
1457 \def\subsubsection{\@startsection{subsubsection}{3}%
1458 \z@{.5\linespacing\@plus.7\linespacing}{-0.5em}%
1459 {\normalfont\itshape}}%
1460 % \end{macrocode}
1461 % \end{macro}
1462 % \begin{macro}{\paragraph}
1463 % \begin{macro}{\subparagraph}
1464 % Paragraphs and subparagraphs are in normal font:
1465 % \begin{macrocode}
1466 \def\paragraph{\@startsection{paragraph}{4}%
1467 \z@\z@{-0.5em}%
1468 {\normalfont}}%
1469 \def\subparagraph{\@startsection{subparagraph}{5}%
1470 \z@\z@{-0.5em}%
1471 {\normalfont}}%
1472 % \end{macrocode}
1473 % \end{macro}
1474 % \end{macro}
1475 %
1476 %\begin{macro}{\if@afterindent}
1477 % \changes{v0.3}{2007/08/23}{Deleted first indent after the section head}
1478 % The first paragraph after section head is \emph{not} indented,
1479 % like in standard \LaTeX---but \emph{unlike} \progname{amsart}.
1480 % The code below is inspired by David Carlisle's package
1481 % \progname{indentfirst}~\cite{Carlisle95:indentfirst} (of course
1482 % David wanted to \emph{have} the first indent, and we want
1483 % the opposite):
1484 % \begin{macrocode}
1485 \let\@afterindenttrue\@afterindentfalse
1486 \@afterindentfalse
1487 % \end{macrocode}
1488 % \end{macro}
1489 %
1490 % \begin{macro}{\appendix}
1491 % \changes{v1.4}{2009/11/10}{Redefined the macro to delete ugly indent
1492 % in TOC}
1493 % The standard \progname{amsart} macro |\@tochangmeasure| measures
1494 % the width of the TOC label for the hanging indentation of TOC
1495 % entries. However, for appendices this label includes the word
1496 % ``Appendix'', which leads to an ugly indent of TOC entries.
1497 % Therefore we stop measuring in appendices:
1498 % \begin{macrocode}
1499 \def\appendix{\par\c@section\z@ \c@subsection\z@
1500 \let\sectionname\appendixname
1501 \def\thesection{\@Alph\c@section}%
1502 \def\@tochangmeasure##1{}}
1503 % \end{macrocode}
1504 %
1505 % \end{macro}
1506 %
1507 %
1508 %
1509 %\subsection{Theorem Styles}
1510 %\label{sec:theorem_code}
1511 %
1512 % Here we redefine three main style of \progname{amsart}. Here are
1513 % the arguments of |\newtheoremstyle| from~\cite{Downes04:amsart}:
1514 %\begin{verbatim}
1515 % #1
1516 % \newtheoremstyle{NAME}%
1517 % #2 #3 #4
1518 % {ABOVESPACE}{BELOWSPACE}{BODYFONT}%
1519 % #5 #6 #7 #8
1520 % {INDENT}{HEADFONT}{HEADPUNCT}{HEADSPACE}%
1521 % #9
1522 % {CUSTOM-HEAD-SPEC}
1523 %\end{verbatim}
1524 %
1525 %
1526 %
1527 % In the |plain| style the name (``theorem'') and number are
1528 % printed in small caps, the optional note is in
1529 % upright, and the text is slanted.
1530 % \begin{macrocode}
1531 \newtheoremstyle{plain}{0.5\linespacing}{0.5\linespacing}{\slshape}{0pt}%
1532 {\scshape}{:}{0.5em}{\thmname{#1}\thmnumber{ #2}\thmnote{\upshape{} (#3)}}
1533 % \end{macrocode}
1534 %
1535 %
1536 % In the |definition| style the name, the number is slanted, and the
1537 % text and the note are upright.
1538 % \begin{macrocode}
1539 \newtheoremstyle{definition}{0.5\linespacing}{0.5\linespacing}%
1540 {\upshape}{0pt}%
1541 {\slshape}{:}{0.5em}{\thmname{#1}\thmnumber{ #2}\thmnote{\upshape{} (#3)}}
1542 % \end{macrocode}
1543 %
1544 %
1545 % In the |remark| style the name and the number are in small caps,
1546 % the note and the text text is upright.
1547 % \changes{v0.4}{2007/09/03}{Redefined remark and definition styles:
1548 % the note is now upright.}
1549 % \begin{macrocode}
1550 \newtheoremstyle{remark}{0.5\linespacing}{0.5\linespacing}%
1551 {\upshape}{0pt}%
1552 {\scshape}{:}{0.5em}{\thmname{#1}\thmnumber{ #2}\thmnote{\upshape{} (#3)}}
1553 % \end{macrocode}
1554 %
1555 %
1556 %
1557 % \begin{macro}{proof}
1558 % \changes{v0.3}{2007/08/23}{Redefined \progname{amsart} defaults}
1559 % We want to have the word ``proof'' slanted rather than italicized:
1560 % \begin{macrocode}
1561 \renewenvironment{proof}[1][\proofname]{\par
1562 \pushQED{\qed}%
1563 \normalfont \topsep6\p@\@plus6\p@\relax
1564 \trivlist
1565 \item[\hskip\labelsep
1566 \slshape
1567 #1\@addpunct{.}]\ignorespaces
1568 }{%
1569 \popQED\endtrivlist\@endpefalse
1570 }
1571 % \end{macrocode}
1572 % \end{macro}
1573 %
1574 %
1575 % \begin{macro}{\qed}
1576 % \changes{v0.3}{2007/08/24}{Redefined \progname{amsart} default}
1577 % \changes{v1.3}{2008/01/27}{Changed math mode branch}
1578 % Unlike \progname{amsart}, we do not want the QED symbol to be
1579 % flushed right:
1580 % \begin{macrocode}
1581 \DeclareRobustCommand{\qed}{%
1582 \leavevmode\unskip\penalty9999 \hbox{}\nobreak
1583 \ifmmode
1584 \makebox[0pt][l]{\qquad\hbox{\qedsymbol}}%
1585 \else
1586 \qquad\hbox{\qedsymbol}\fi}%
1587 % \end{macrocode}
1588 % \end{macro}
1589 %
1590 % \begin{macro}{\mqedhere}
1591 % \changes{v1.3}{2008/01/27}{Introduced the command}
1592 % Normally |\qedhere| is typeset with zero effective width in math
1593 % mode to present centering alignment in equations. This presents
1594 % problems in |multline| environment, where the last line is flushed
1595 % right, so |\qedhere| would be typeset on the margin. The following
1596 % command switches to text mode:
1597 % \begin{macrocode}
1598 \def\mqedhere{\ensuremath{\text{\qedhere}}}%
1599 % \end{macrocode}
1600 %
1601 % \end{macro}
1602 %
1603 %
1604 % \begin{macro}{\qedsymbol}
1605 % \changes{v0.3}{2007/08/24}{Redefined \progname{amsart} default}
1606 % The QED symbol itself is a small closed box:
1607 % \begin{macrocode}
1608 \def\qedsymbol{\rule[0.47pt]{4pt}{6pt}}%
1609 % \end{macrocode}
1610 %
1611 % \end{macro}
1612 %
1613 % \begin{macro}{\namedprop}
1614 % \changes{v1.1}{2007/09/30}{Introduced macro}
1615 % This is the unstarred version of the macro. It calls the command
1616 % and then closes the group opened by |\namedprop@|
1617 % \begin{macrocode}
1618 \newenvironment{namedprop}{%
1619 \namedprop@}{%
1620 \end{namedprop@thm}%
1621 \egroup}
1622 % \end{macrocode}
1623 % \end{macro}
1624 %
1625 % \begin{macro}{\namedprop*}
1626 % \changes{v1.1}{2007/09/30}{Introduced macro}
1627 % The starred version is similar:
1628 % \begin{macrocode}
1629 \newenvironment{namedprop*}{%
1630 \namedprop@star@}{%
1631 \end{namedprop@thm}%
1632 \egroup}
1633 % \end{macrocode}
1634 % \end{macro}
1635 %
1636 % \begin{macro}{\namedprop@star@}
1637 % \changes{v1.1}{2007/09/30}{Introduced macro}
1638 % The starred version has two mandatory arguments: style and and
1639 % name, and one optional argument: note.
1640 % \begin{macrocode}
1641 \def\namedprop@star@#1#2{%
1642 \@ifnextchar[{\namedprop@star@@{#1}{#2}}{\namedprop@star@@{#1}{#2}[]}}%
1643 % \end{macrocode}
1644 % \end{macro}
1645 % \begin{macro}{\namedprop@star@@}
1646 % \changes{v1.1}{2007/09/30}{Introduced macro}
1647 % This is the command that does the real work:
1648 % \begin{macrocode}
1649 \def\namedprop@star@@#1#2[#3]{%
1650 \bgroup
1651 \let\namedprop@thm\relax
1652 \theoremstyle{#1}
1653 \newtheorem*{namedprop@thm}{#2}
1654 \begin{namedprop@thm}[#3]}
1655 % \end{macrocode}
1656 % \end{macro}
1657 % \begin{macro}{\namedprop@}
1658 % \changes{v1.1}{2007/09/30}{Introduced macro}
1659 % This is the unstarred version of the macro. It has three
1660 % mandatory arguments: style, counter and the name, and one
1661 % optional argument: the note.
1662 % \begin{macrocode}
1663 \def\namedprop@#1#2#3{%
1664 \@ifnextchar[{\namedprop@@{#1}{#2}{#3}}{\namedprop@@{#1}{#2}{#3}[]}}%
1665 % \end{macrocode}
1666 % \end{macro}
1667 % \begin{macro}{\namedprop@@}
1668 % \changes{v1.1}{2007/09/30}{Introduced macro}
1669 % And the real macro:
1670 % \begin{macrocode}
1671 \def\namedprop@@#1#2#3[#4]{%
1672 \bgroup
1673 \let\namedprop@thm\relax
1674 \theoremstyle{#1}
1675 \newtheorem{namedprop@thm}[#2]{#3}
1676 \begin{namedprop@thm}[#4]}
1677 % \end{macrocode}
1678 % \end{macro}
1679 %
1680 %\subsection{Bibliography}
1681 %\label{sec:biblio_code}
1682 %
1683 % \begin{macro}{\@bibtitlestyle}
1684 % \changes{v0.3}{2007/08/23}{Redefined to have centered heading}
1685 % Unlike other section heads, the word ``References'' in the journal
1686 % is centered:
1687 % \begin{macrocode}
1688 \renewcommand{\@bibtitlestyle}{%
1689 \@xp\centeredsection\@xp*\@xp{\refname}%
1690 }%
1691 % \end{macrocode}
1692 % \end{macro}
1693 %
1694 %\subsection{End of Class}
1695 %\label{end}
1696 %
1697 %
1698 % \begin{macrocode}
1699 %</class>
1700 % \end{macrocode}
1701 %
1702 %\Finale
1703 %\clearpage
1704 %
1705 %\PrintChanges
1706 %\clearpage
1707 %\PrintIndex
1708 %
1709 \endinput