Debian Codegraph @

texmf-dist/source/latex/heria/heria.dtx

raw
1 % \iffalse meta-comment
2 %
3 % Copyright 2023-2025 Tristan Miller
4 % -----------------------------------
5 %
6 % This work may be distributed and/or modified under the
7 % conditions of the LaTeX Project Public License, either version 1.3c
8 % of this license or (at your option) any later version.
9 % The latest version of this license is in
10 % https://www.latex-project.org/lppl.txt
11 % and version 1.3c or later is part of all distributions of LaTeX
12 % version 2008 or later.
13 %
14 % \fi
15 %
16 % \iffalse
17 %<*driver>
18 \ProvidesFile{heria.dtx}
19 %</driver>
20 %<*class>
21 %% Copyright 2023-2025 Tristan Miller
22 %% Copyright 2016 John Kormylo
23 %%
24 %% This work may be distributed and/or modified under the
25 %% conditions of the LaTeX Project Public License, either version 1.3c
26 %% of this license or (at your option) any later version.
27 %% The latest version of this license is in
28 %% https://www.latex-project.org/lppl.txt
29 %% and version 1.3c or later is part of all distributions of LaTeX
30 %% version 2008 or later.
31 %%
32 %</class>
33 %<class>\NeedsTeXFormat{LaTeX2e}
34 %<class>\ProvidesClass{heria}
35 %<*class>
36 [2025-08-16 v4.0.1.0 Class for Horizon Europe (R)IA proposals]
37 %</class>
38 %
39 %<*driver>
40 \documentclass{ltxdoc}
41 \DisableCrossrefs
42 \CodelineIndex
43 \RecordChanges
44 \addtolength\marginparwidth{5ex}
45 \addtolength\oddsidemargin{6ex}
46 \addtolength\evensidemargin{6ex}
47 \begin{document}
48 \DocInput{heria.dtx}
49 \end{document}
50 %</driver>
51 % \fi
52 %
53 % \CheckSum{1521}
54 %
55 % \CharacterTable
56 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
57 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
58 % Digits \0\1\2\3\4\5\6\7\8\9
59 % Exclamation \! Double quote \" Hash (number) \#
60 % Dollar \$ Percent \% Ampersand \&
61 % Acute accent \' Left paren \( Right paren \)
62 % Asterisk \* Plus \+ Comma \,
63 % Minus \- Point \. Solidus \/
64 % Colon \: Semicolon \; Less than \<
65 % Equals \= Greater than \> Question mark \?
66 % Commercial at \@ Left bracket \[ Backslash \\
67 % Right bracket \] Circumflex \^ Underscore \_
68 % Grave accent \` Left brace \{ Vertical bar \|
69 % Right brace \} Tilde \~}
70 %
71 %
72 % \GetFileInfo{heria.dtx}
73 %
74 % \DoNotIndex{\newcommand,\newenvironment}
75 %
76 %
77 % \title{\textsf{heria}: A \LaTeX\ class for\\ Horizon Europe RIA and
78 % IA grant proposals\thanks{This document corresponds to
79 % \textsf{heria}~\fileversion, dated \filedate. See §\ref{sec:version}
80 % for an explanation of the versioning scheme.}}
81 %
82 % \author{Tristan Miller\\
83 % Department of Computer Science\\
84 % University of Manitoba\\
85 % \texttt{[email protected]}}
86 %
87 % \maketitle
88 % \tableofcontents
89 %
90 % \section{Introduction}\label{sec:introduction}
91 %
92 % This document describes the usage of \textsf{heria}, a \LaTeX\ class
93 % that facilitates the preparation of Research and Innovation Action
94 % (RIA) and Innovation Action (IA) funding proposals for the European
95 % Commission's~(EC) Horizon Europe program. The Commission prescribes
96 % a detailed, structured format for the technical description
97 % (``Part~B'') of these proposals, but provides templates only in Rich
98 % Text Format (RTF), a format that does not lend itself well to
99 % collaborative authorship and \mbox{(cross-)}reference management.
100 % The \textsf{heria} class is a conversion of the official Part~B
101 % template into \LaTeX; it preserves the formatting and most of the
102 % instructions of the original version, and has the additional feature
103 % that tables (listing the participants, work packages, deliverables,
104 % etc.)\ are programmatically generated according to data supplied by
105 % the user. The advantage of this becomes clear when one considers
106 % that much of the data is reused across multiple tables.
107 %
108 % The \textsf{heria} package can be used to write proposals using
109 % any of the following versions of the official Part~B template:
110 % \begin{itemize}
111 % \item 3.2 (2022-11-15)
112 % \item 3.3 (2023-09-27)
113 % \item 3.4 (2024-04-04)
114 % \item 4.0 (2024-12-16)
115 % \end{itemize}
116 %
117 % \bigskip
118 %
119 % \noindent Besides this technical manual, there is a journal article
120 % that describes the motivation for and development of \textsf{heria}:
121 %
122 % \begin{quote}
123 % Tristan
124 % Miller. \href{https://dx.doi.org/10.47397/tb/45-1/tb139miller-horizon}{Preparing
125 % Horizon Europe proposals in \LaTeX\ with
126 % \textsf{heria}}. \emph{TUGboat: The Communications of the \TeX\
127 % Users Group}, 45(1):\allowbreak 59–64, 2024. ISSN 0896-3207. DOI:
128 % \href{https://dx.doi.org/10.47397/tb/45-1/tb139miller-horizon}{10.47397/tb/45-1/tb139miller-horizon}.
129 % \end{quote}
130 %
131 % \noindent Please cite this journal article if you want to refer to
132 % \textsf{heria} in a publication.
133 %
134 % \section{Usage}
135 %
136 % The EC's official template is structured in such a way that form and
137 % content cannot be entirely separated. The best way of starting a new
138 % proposal is therefore to make a copy of \texttt{heria-proposal.tex},
139 % the skeleton proposal distributed with this package, and then adapt
140 % it to your project. The following subsections describe the various
141 % macros and environments provided by \textsf{heria}, roughly in the
142 % same order presented in the skeleton proposal.
143 %
144 % \subsection{Preamble}
145 %
146 % Your proposal document should begin with the following line if you
147 % want the template instructions to be included in the output:
148 % \begin{quote}\verb|\documentclass[showinstructions]{heria}|\end{quote}
149 % Otherwise you can omit the \verb|showinstructions| option:
150 % \begin{quote}\verb|\documentclass{heria}|\end{quote}
151 %
152 % The \verb|heria| class is based on the default \LaTeX\
153 % \verb|article| class, and so all of the macros and environments from
154 % the latter are available for you to use. The class automatically
155 % sets the font, margins, etc.\ mandated by the official instructions,
156 % and redefines some of the \verb|article| macros as described later
157 % in this document.
158 %
159 % \medskip
160 %
161 % \noindent Following \cs{documentclass} you should tell
162 % \textsf{heria} which version of the official Part~B template you
163 % want to use:
164 %
165 % \DescribeMacro{\templateversion} This macro sets the version of the
166 % official Part~B template the proposal should use. It takes a single
167 % argument; valid values are \verb|3.2|, \verb|3.3|, \verb|3.4|, and
168 % \verb|4.0|. If you omit this macro, \textsf{heria} will default to
169 % using the latest version of the template.
170 %
171 % \medskip
172 %
173 % \noindent You should then provide the proposal metadata using the
174 % following macros:
175 %
176 % \DescribeMacro{\title} This macro takes the title of the proposal as
177 % its sole argument. This title will be printed by the \cs{maketitle}
178 % macro (see below) and used for the PDF metadata.
179 %
180 % \DescribeMacro{\callname} This macro takes as its sole argument the
181 % official natural-language description of the call to which the
182 % proposal is being submitted. It will be printed in the page header.
183 %
184 % \DescribeMacro{\callidentifier} This macro takes as its sole
185 % argument the identifier of the call to which the proposal is being
186 % submitted, which will be printed in the page header. Call
187 % identifiers normally have the format
188 % \texttt{HORIZON-XX0-0000-XXXXX-00-XXXXX}.
189 %
190 % \DescribeMacro{\calltopic} This macro takes as its sole argument the
191 % identifier of the specific topic within the call to which the
192 % proposal is being submitted. Such identifiers normally have the
193 % format \texttt{HORIZON-XX0-0000-XXXXX-00-00}. The official template
194 % does not require proposals to mention the call topic, so you are
195 % free to omit the \cs{calltopic} macro. If you do use it, it will be
196 % printed by \cs{maketitle} below the proposal title.
197 %
198 % \subsection{Title}
199 %
200 % \DescribeMacro{\maketitle} This is generally the first macro that
201 % should be called in the main body of the document. As with the
202 % standard \verb|article| class, it typesets the title.
203 %
204 % \subsection{Section headings, tags, and instructions}
205 %
206 % \DescribeMacro{\heinstructions} When the \verb|showinstructions|
207 % options is passed to the document class, the \cs{heinstructions}
208 % macro prints instructions from the official EC template. These
209 % instructions are contained in files distributed with the
210 % \textsf{heria} class; the macro's sole argument is used to construct
211 % the name of one of these files. To suppress printing of individual
212 % instructions, you can simply remove or comment out the corresponding
213 % \cs{heinstructions} macro.
214 %
215 % \DescribeMacro{\opentag}\DescribeMacro{\closetag} The official
216 % template includes a number of ``tags'' that are used for the EC's
217 % ``internal processing of information, mostly for statistical
218 % gathering.'' The \cs{opentag} and \cs{closetag} macros are used to
219 % emit the tags at the appropriate places in the proposal, and so
220 % should be left in their original positions in the skeleton template.
221 % The EC asks that proposal authors ``not move, delete, re-order, or
222 % alter tags in any way''.
223 %
224 % \DescribeMacro{\section}\DescribeMacro{\subsection}\DescribeMacro{\subsubsection}
225 % These three macros take a mandatory argument specifying the title of
226 % the corresponding section, subsection, or subsubsection,
227 % respectively. These document subdivisions are fixed by the official
228 % template and so generally should not be renamed or reordered, though
229 % it is probably safe to add additional ones where it does not disrupt
230 % the numbering of the existing ones. Many sections and subsections
231 % \emph{must} be preceded or followed by certain tags, which are
232 % specified in the first and second optional arguments, respectively.
233 % The third optional argument contains the recommended page limit,
234 % when specified by the official template. The page limit will be
235 % printed only when the \verb|showinstructions| option is passed to
236 % the document class.
237 %
238 % \subsection{Participants}
239 %
240 % \DescribeMacro{\participant} Participants should be listed in the
241 % same order as in Part~A of the proposal, which is completed using an
242 % online form. Use one invocation of \cs{participant} for each
243 % participant, with the following three mandatory arguments, in order:
244 % the participant's full name, the participant's short name, and the
245 % participant's two-letter country code. The first participant will
246 % be marked in the participant table as the project coordinator. Note
247 % that while the short name is typeset in the proposal, it is also
248 % used internally by the \verb|heria| class as part of a \LaTeX\
249 % counter name, and so should generally consist only of ASCII letters.
250 %
251 % \DescribeMacro{\makeparticipantstable} This macro emits the table of
252 % participants using the data from the \cs{participant} macro.
253 % Participants are automatically numbered according to the order of
254 % the \cs{participant} macros.
255 %
256 % \subsection{Summary tableau}
257 %
258 % \DescribeEnv{summarycanvas} \DescribeEnv{summarybox} Proposals must
259 % include a summary tableau of six boxes that briefly describe the
260 % project's specific needs; expected results; dissemination,
261 % exploitation, and communication measures; target groups; outcomes;
262 % and impacts. The \verb|summarycanvas| and \verb|summaryenv|
263 % environments are provided for this purpose. Each \verb|summarybox|
264 % environment typesets a shaded box headed by its mandatory argument.
265 % Three such boxes can be grouped side by side into a single
266 % \verb|summarycanvas| environment. The skeleton proposal
267 % demonstrates how all six boxes can be placed in a floating figure on
268 % a single landscape page, though other arrangements seem to be
269 % permissible.
270 %
271 % \subsection{Work packages and deliverables}
272 %
273 % \DescribeMacro{\makeworkpackagestable} This macro emits the table of
274 % work packages, using the data from the \cs{workpackage} macros. Work
275 % packages are automatically numbered according to the order of the
276 % \cs{workpackage} macros.
277 %
278 % \DescribeMacro{\workpackage} This macro declares a work package, and
279 % takes five mandatory arguments: a unique identifier (used only
280 % internally by \verb|heria| for cross-referencing purposes), the work
281 % package title, the short name of the lead participant (as specified
282 % in the corresponding \cs{participant} macro), the numeric starting
283 % month (measured from the start of the project), and the numeric
284 % ending month. Since the unique identifier is used as part of a
285 % \LaTeX\ counter name, you should generally use only ASCII letters.
286 % Work packages are automatically numbered. You should use one
287 % \cs{workpackage} macro for each work package in your project.
288 %
289 % \DescribeEnv{objectives} This environment typesets a box containing
290 % an enumerated list of objectives for the most recently declared work
291 % package. Use the \cs{item} macro to begin each objective.
292 %
293 % \DescribeEnv{descriptionofwork} This environment typesets a box
294 % where you can describe the work program of the most recently
295 % declared work package. You can enter this information in free-form
296 % and\slash or use the \cs{task} macro to enumerate individual tasks.
297 %
298 % \DescribeMacro{\task} This macro typesets basic information about a
299 % work package task. The format used by this macro is not strictly
300 % mandated by the official template, but you may nonetheless find it
301 % useful. The macro takes three mandatory arguments: the task name,
302 % the short name of the lead participant (as specified in the
303 % corresponding \cs{participant} macro), a list of other participants
304 % (as free-form text, but advisedly using short names of participants
305 % where appropriate), and the starting and ending months for the task
306 % (as free-form text). You should use one \cs{task} macro for each
307 % task in your work package. You can, if you wish, follow each
308 % \cs{task} macro with a free-form description of the task.
309 %
310 % \DescribeMacro{\deliverable} This macro declares a deliverable for
311 % the most recently declared work package. There are six mandatory
312 % arguments: the deliverable name, a short description of the
313 % deliverable, the short name of the lead participant (as specified in
314 % the corresponding \cs{participant} macro), the deliverable type, the
315 % dissemination level, and the numeric delivery month (in months from
316 % the beginning of the project). The type and dissemination level
317 % arguments must be selected from the identifiers given in the
318 % template instructions.
319 %
320 % \DescribeMacro{\makedeliverablestable} This macro emits the table of
321 % deliverables, using the data from the \cs{deliverable}
322 % macros. Deliverables are automatically numbered according to the
323 % order of the \cs{deliverable} macros.
324 %
325 % \subsection{Milestones}
326 %
327 % \DescribeMacro{\milestone} This macro declares a project milestone.
328 % It takes four mandatory arguments: the milestone name, a free-form
329 % list of related work packages, the due date (in number of months
330 % from the start of the project), and a free-form means of
331 % verification. You should use one \cs{milestone} macro for each
332 % milestone in your project.
333 %
334 % \DescribeMacro{\makemilestonestable} This macro emits the table of
335 % milestones, using the data from the \cs{milestone}
336 % macros. Milestones are automatically numbered according to the order
337 % of the \cs{milestone} macros.
338 %
339 % \subsection{Critical risks}
340 %
341 % \DescribeMacro{\criticalrisk} This macro declares a critical risk
342 % for the project. It takes five mandatory arguments: a free-form
343 % description of the risk, the likelihood of the risk, the severity of
344 % the risk, and a free-form description of proposed mitigation
345 % measures. The likelihood and severity arguments must be selected
346 % from the identifiers given in the template instructions. You should
347 % use one \cs{criticalrisk} macro for each critical risk in your
348 % project.
349 %
350 % \DescribeMacro{\makecriticalriskstable} This macro emits the table
351 % of critical risks, using the data from the \cs{criticalrisk}
352 % macros. Critical risks are output in the order of the
353 % \cs{criticalrisk} macros.
354 %
355 % \subsection{Summary of staff effort}
356 %
357 % \DescribeMacro{\staffeffort} This macro declares the number of
358 % person-months a given project participant will spend on a given work
359 % package. It takes three mandatory arguments: the short name of the
360 % participant (as specified in the corresponding \cs{participant}
361 % macro), the short name of the work package (as specified in the
362 % corresponding \cs{workpackage} macro), and the number of months.
363 % You must provide one and only one \cs{staffeffort} macro for every
364 % possible combination of participant and work package in your project.
365 %
366 % \DescribeMacro{\makestaffefforttable} This macro emits the summary
367 % of staff effort table, using the data from the \cs{staffeffort}
368 % macros. The table rows and columns are automatically ordered
369 % according to the order of the \cs{participant} and \cs{workpackage}
370 % macros, respectively, and the total person-months per participant
371 % and total person-months per work package are automatically
372 % calculated.
373 %
374 % \subsection{Costs}
375 %
376 % \DescribeMacro{\subcontractingcost} This macro declares a
377 % subcontracting cost. It takes three mandatory arguments: the short
378 % name of a participant (as specified in the corresponding
379 % \cs{participant} macro), the amount of the subcontracting cost in
380 % euros, and a free-form description of the tasks and justification
381 % for the subcontracting cost. You should use one
382 % \cs{subcontractingcost} macro for each subcontracting cost in your
383 % project.
384 %
385 % \DescribeMacro{\makesubcontractingcoststable} This macro emits the
386 % tables of subcontracting costs, using the data from the
387 % \cs{subcontractingcost} macros. Subcontracting costs are
388 % automatically grouped by participant and then output according to
389 % the order of the \cs{participant} and \cs{subcontractingcost}
390 % macros.
391 %
392 % \DescribeMacro{\purchasecost} This macro declares the purchase costs
393 % for a participant. It takes eight mandatory arguments:
394 % \begin{quote}\cs{purchasecost}\marg{participant}\verb|%|\\
395 % \hspace*{5ex}\marg{goodscost}\marg{justification}\verb|%|\\
396 % \hspace*{5ex}\marg{travelcost}\marg{justification}\verb|%|\\
397 % \hspace*{5ex}\marg{equipmentcost}\marg{justification}\verb|%|\\
398 % \hspace*{5ex}\marg{remainingcosts}\end{quote}
399 % Here \meta{participant} is the short name of a participant (as
400 % specified in the corresponding \cs{participant} macro);
401 % \meta{goodscost}, \meta{travelcost}, \meta{equipmentcost}, and
402 % \meta{remainingcost} are the amount of the ``other goods, works and
403 % services'', ``travel and subsistence'', ``equipment'', and
404 % ``remaining purchase costs'', respectively, in euros; and the
405 % \meta{justification} arguments are free-form justifications for the
406 % immediately preceding cost. (According to the official template,
407 % the remaining purchase costs do not require a justification.) You
408 % should use one \cs{purchasecost} macro for each participant with
409 % purchase costs in your project.
410 %
411 % \DescribeMacro{\makepurchasecoststable} This macro emits the tables
412 % of purchase costs, using the data from the \cs{purchasecost} macros.
413 % Purchase costs are output according to the order of the
414 % \cs{participant} macros, and then in reverse order of the largest
415 % costs, with the ``remaining purchase costs'' output last.
416 %
417 % \DescribeMacro{\othercost} This macro declares an ``other'' cost
418 % (i.e.,\ in the ``other costs'' category). It takes three mandatory
419 % arguments: the short name of a participant (as specified in the
420 % corresponding \cs{participant} macro), the amount of the ``other''
421 % cost in euros, and a free-form justification for the cost. You
422 % should use one \cs{othercost} macro for each ``other'' cost in your
423 % project.
424 %
425 % \DescribeMacro{\makeothercoststable} This macro emits the tables of
426 % ``other'' costs, using the data from the \cs{othercost} macros.
427 % ``Other'' costs are automatically grouped by participant and then
428 % output according to the order of the \cs{participant} and
429 % \cs{othercost} macros.
430 %
431 % \DescribeMacro{\inkindcontribution} This macro declares an in-kind
432 % contribution. It takes five mandatory arguments: the short name of a
433 % participant (as specified in the corresponding \cs{participant}
434 % macro), the third party name, the category of the contribution
435 % (selected from \texttt{Seconded personnel}, \texttt{Travel and
436 % subsistence}, \texttt{Equipment}, \texttt{Other goods, works and
437 % services}, and \texttt{Internally invoiced goods and services}), the
438 % amount of the cost in euros, and a free-form justification for the
439 % in-kind contribution. You should use one \cs{inkindcontribution}
440 % macro for each in-kind contribution in your project.
441 %
442 % \DescribeMacro{\makeinkindcontributionstable} This macro emits the
443 % tables of in-kind contributions, using the data from the
444 % \cs{inkindcontribution} macros. In-kind contributions are
445 % automatically grouped by participant and then output according to
446 % the order of the \cs{participant} and \cs{inkindcontribution}
447 % macros.
448 %
449 % \section{Hints and tips}
450 %
451 % \paragraph{Part~A.} Some proposal data---in particular, the list of
452 % participants and the costs---must be entered not just in Part~B of
453 % the proposal, but also in the online Part~A form. It is your
454 % responsibility to ensure that this data is consistent across the two
455 % parts of the proposal.
456 %
457 % \paragraph{File structure.} Rather than putting all the work package
458 % data into your main proposal document, you may find it convenient to
459 % put the \cs{workpackage} macro, the \verb|objectives| environment,
460 % the \verb|descriptionofwork| environment, and the \cs{deliverable}
461 % macros corresponding to a single work package into a dedicated file,
462 % which you can then include in your main proposal document with the
463 % \cs{input} macro. This will make it easier for you to shuffle the
464 % order of work packages as you write your proposal. (You may wish to
465 % split off other sections of the proposal into their own files,
466 % though the official template gives considerably less freedom to
467 % reorder them.)
468 %
469 % \paragraph{Vertical spacing.} The \textsf{heria} class applies the
470 % same vertical spacing as the \textsf{article} class; this is
471 % particularly generous around section headings. If you find yourself
472 % running up against the page limit, you may wish to add some
473 % \cs{vspace} commands, with a negative length as the argument, to
474 % tighten up the spaces before section headings, and perhaps also the
475 % tables.
476 %
477 % \section{Limitations and caveats}
478 %
479 % \paragraph{Table 3.1h.} The instructions in the official template
480 % are ambiguous about the construction of the tables for purchase
481 % costs. In particular, it's not clear whether each individual cost
482 % exceeding 15\% of the personnel costs must be listed in a separate
483 % row, or whether all costs in each category (``travel and
484 % subsistence'', ``equipment'', etc.)\ should be combined into a
485 % single row. The \textsf{heria} class takes the latter
486 % interpretation; this may or may not be the same interpretation
487 % adopted by the funding agency and its reviewers.
488 %
489 % \paragraph{Error handling.} The class currently does very little
490 % error checking on its input. Usually invalid input (e.g., mistyping
491 % the short name of a participant or work package in a macro argument,
492 % or neglecting to provide a macro necessary to generate a table)
493 % \emph{will} result in an error that prevents the document from
494 % compiling, though the diagnostic message emitted by \LaTeX\ may be
495 % somewhat cryptic.
496 %
497 % \paragraph{Coverage of instructions.} The class reproduces most,
498 % but not all, of the instructions from the official template. In
499 % particular, it omits all the instructions occurring before the title
500 % of the proposal, including three pages of introductory material and
501 % definitions. You should not rely solely on the instructions emitted
502 % by the class, which are provided only as a convenience; be sure to
503 % also read the instructions in the official template (and in the text
504 % of the call to which you are applying).
505 %
506 % \section{Package development}
507 %
508 % \subsection{Source repository and bug tracker}
509 %
510 % For now, the package's source code is hosted on GitHub at
511 % \url{https://github.com/logological/heria}. There you will also
512 % find an issue tracker for reporting bugs and feature requests.
513 %
514 % \subsection{Versioning scheme}\label{sec:version}
515 %
516 % Each release of the \textsf{heria} class carries a version number in
517 % the format \textit{omaj.\allowbreak omin.\allowbreak maj.\allowbreak
518 % min}. Here \textit{omaj.omin} is the highest version number of the
519 % official Horizon Europe RIA template that the class implements, and
520 % \textit{maj} and \textit{min} represent, respectively, major and
521 % minor revisions to the class (including any ancillary files, such as
522 % the skeleton proposal and documentation). A major revision is one
523 % that includes potentially breaking changes or significant new
524 % features; minor revisions are for all other changes. While efforts
525 % will be made to preserve compatibility with earlier versions of the
526 % official template (via the \cs{templateversion} macro), any change
527 % to \textit{omaj.omin} could unavoidably introduce breaking changes
528 % to the class interface. Any such changes will be noted in the
529 % package documentation.
530 %
531 % \subsection{Version history}
532 %
533 % \begin{description}
534 % \item[v4.0.1.0 (2025-08-16)] Add support for version 4.0 of the
535 % official Part~B template.
536 % \item[v3.4.1.3 (2024-09-03)] Fixed a bug where the person-months in
537 % Table 3.1a were doubled.
538 % \item[v3.4.1.2 (2024-09-03)] Fixed a bug where the column totals in
539 % Table 3.1f were doubled.
540 % \item[v3.4.1.1 (2024-08-14)] Update documentation with a reference
541 % to the \emph{TUGboat} paper on \textsf{heria}.
542 % \item[v3.4.1.0 (2024-07-14)] Add support for version 3.4 of the
543 % official Part~B template and the \cs{templateversion} macro for
544 % backward compatibility with earlier versions.
545 % \item[v3.2.1.0 (2023-12-04)] Initial release.
546 % \end{description}
547 %
548 % \section{Disclaimer}
549 %
550 % The \textsf{heria} package is distributed in the hope that it will
551 % be useful, but WITHOUT ANY WARRANTY; without even the implied
552 % warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
553 % PURPOSE. (See the \LaTeX\ Project Public License for further
554 % details.) In particular, users should understand that the
555 % \textsf{heria} proposal template is wholly unofficial, and its
556 % author(s) accept no responsibility for any omissions, errors, or
557 % discrepancies with respect to the requirements set forth in the
558 % official Horizon Europe templates and associated documentation. If
559 % you produce a proposal with this template, then you alone are
560 % responsible for ensuring that it matches all the official
561 % requirements before submitting it to the funding body.
562 %
563 % \appendix
564 %
565 % \section{Implementation}
566 %
567 % \StopEventually{}
568 %
569 % \subsection*{Basic setup}
570 %
571 % Import the \verb|article| class and set up some basic features
572 % (margins, hyperlinks, etc.)
573 %
574 %\iffalse
575 %<*class>
576 %\fi
577 % \begin{macrocode}
578 \LoadClass[11pt,a4paper]{article}
579 \RequirePackage[T1]{fontenc} % T1 font encoding
580 \RequirePackage[left=15mm,
581 top=15mm,
582 bottom=15mm,
583 right=15mm,
584 includehead,
585 includefoot,
586 headheight=10pt,
587 headsep=5mm,
588 footskip=18pt,
589 ]{geometry}
590 \RequirePackage[pdftex]{graphicx} % For graphics
591
592 \RequirePackage[pdftex,pdfusetitle]{hyperref} % Hyperlinks
593 \hypersetup{%
594 colorlinks=true,
595 breaklinks=true,
596 urlcolor=black,
597 linkcolor=black,
598 citecolor=black,
599 pdfsubject={},
600 pdfkeywords={},
601 }
602
603 \RequirePackage{xfp} % Floating point numbers
604
605 % \end{macrocode}
606 %
607 % A helper function to display variables
608 %
609 % \begin{macrocode}
610 \newcommand{\disptoken}[1]{%
611 \csname#1\endcsname
612 }
613 % \end{macrocode}
614 %
615 % \subsection*{Tables and framed boxes}
616 %
617 % \begin{macrocode}
618 \RequirePackage{colortbl} % for shaded table rows
619 \RequirePackage{xltabular} % for breakable tables with var-width columns
620 \RequirePackage[table]{xcolor} % for colours and shaded table cells
621 \RequirePackage[breakable,raster]{tcolorbox} % for framed boxes
622 % \end{macrocode}
623 %
624 % \subsection*{Colours}
625 %
626 % \begin{macrocode}
627 \definecolor{taggrey}{HTML}{B5B5B5}
628 \definecolor{footergrey}{HTML}{D8D8D8}
629 \definecolor{tablegrey}{HTML}{F2F2F2}
630 \definecolor{summaryblue}{HTML}{00B0F0}
631 % \end{macrocode}
632 %
633 % \subsection*{Set official Horizon Europe template version}
634 %
635 % \begin{macrocode}
636 \gdef\@templateversion{4.0} % Default version
637 \def\@supportedtemplateversions{3.2,3.3,3.4,4.0} % Supported versions
638 \ExplSyntaxOn
639 \NewDocumentCommand{\templateversion}{m}{%
640 \clist_if_in:NnTF {\@supportedtemplateversions} {#1}
641 {\gdef\@templateversion{#1}}
642 {\PackageError{heria}%
643 {unsupported~template~version}%
644 {Use~one~of~\@supportedtemplateversions}
645 }%
646 }
647 \ExplSyntaxOff
648 % \end{macrocode}
649 % \subsection*{Basic proposal variables}
650 %
651 % \begin{macrocode}
652 \newcommand{\callname}[1]{\gdef\@callname{#1}}%
653 \newcommand{\callidentifier}[1]{\gdef\@callidentifier{#1}}%
654 \newcommand{\calltopic}[1]{\gdef\@calltopic{#1}}%
655 % \end{macrocode}
656 %
657 % \subsection*{Participants}
658 %
659 % \begin{macrocode}
660 \newcounter{@pcount} % Participant counter
661 \newcommand{\participant}[3]{%
662 \stepcounter{@pcount}%
663 \newcounter{@p#2num}%
664 \setcounter{@p#2num}{\value{@pcount}}%
665 \expandafter\xdef\csname @pFullName\arabic{@p#2num}\endcsname{#1}%
666 \expandafter\xdef\csname @pShortName\arabic{@p#2num}\endcsname{#2}%
667 \expandafter\xdef\csname @pCountry\arabic{@p#2num}\endcsname{#3}%
668 \newcounter{@pSubcontractingCosts\arabic{@p#2num}}%
669 \newcounter{@pPurchaseCosts\arabic{@p#2num}}%
670 \newcounter{@pOtherCosts\arabic{@p#2num}}%
671 \newcounter{@pInkindContributions\arabic{@p#2num}}%
672 }
673 % \end{macrocode}
674 %
675 % Get participant number from short name
676 %
677 % \begin{macrocode}
678 \newcommand{\getPnum}[1]{%
679 \@ifundefined{c@@p#1num}{}{\arabic{@p#1num}}%
680 }
681 % \end{macrocode}
682 %
683 % Participants table row
684 %
685 % \begin{macrocode}
686 \newcommand{\ptablerow}[1]{%
687 \stepcounter{#1}
688 \the\value{#1}
689 \ifthenelse{\value{#1}=1}{ (Coordinator) &}{&}%
690 \disptoken{@pFullName\arabic{#1}} (\disptoken{@pShortName\arabic{#1}}) &
691 \disptoken{@pCountry\arabic{#1}} \\
692 \hline%
693 }
694 % \end{macrocode}
695 %
696 % Participants table
697 %
698 % \begin{macrocode}
699 \newcommand{\makeparticipantstable}{%
700 \newcounter{@ptable}
701 \begin{center}
702 \begin{xltabular}{0.9\textwidth}{|l|X|l|}
703 \hline
704 \textbf{Participant No.} &
705 \textbf{Participant organisation name} &
706 \textbf{Country} \\
707 \hline
708 \whiledo%
709 {\value{@ptable}<\numexpr\value{@pcount}-1}%
710 {\ptablerow{@ptable}}%
711 \ptablerow{@ptable}
712 \end{xltabular}
713 \end{center}
714 }
715 % \end{macrocode}
716 %
717 % \subsection*{Work packages}
718 %
719 % \begin{macrocode}
720 \RequirePackage{atveryend}
721 \newcounter{@wpcount} % Work package counter
722 \newcommand{\workpackage}[5]{%
723 \stepcounter{@wpcount}%
724 \newcounter{@wp\arabic{@wpcount}deliverable}%
725 \newcounter{@wp\arabic{@wpcount}task}%
726 \newcounter{@wp#1num}%
727 \setcounter{@wp#1num}{\value{@wpcount}}%
728 \expandafter\xdef\csname %
729 @wpPersonMonths\arabic{@wp#1num}\endcsname{0}%
730 \expandafter\xdef\csname @wpShortName\arabic{@wp#1num}\endcsname{#1}%
731 \expandafter\xdef\csname @wpTitle\arabic{@wp#1num}\endcsname{#2}%
732 \expandafter\xdef\csname %
733 @wpLeadParticipantShortName\arabic{@wp#1num}\endcsname{#3}%
734 \expandafter\xdef\csname @wpStartMonth\arabic{@wp#1num}\endcsname{#4}%
735 \expandafter\xdef\csname @wpEndMonth\arabic{@wp#1num}\endcsname{#5}%
736 \@bsphack
737 \protected@write\@auxout{}%
738 {\string\makeworkpackagestable@data{\arabic{@wp#1num}
739 & #2 & \getPnum{#3} & #3 & %
740 \@ifundefined{@wpTotalPersonMonths\arabic{@wp#1num}}%
741 {\textbf{??}}%
742 {\fpeval{\disptoken{@wpTotalPersonMonths\arabic{@wp#1num}}/2}}%
743 & #4 & #5}}%
744 \@esphack
745 \ifthenelse{\arabic{@wp#1num}=1}{}{\bigskip}
746 \noindent\begin{tabularx}%
747 {1.0\linewidth}{|>{\columncolor{tablegrey}}l|X|}
748 \hline
749 \bfseries Work package number & \arabic{@wp#1num} \\
750 \hline
751 \bfseries Work package title & #2 \\
752 \hline
753 \end{tabularx}
754 }
755 \newcommand{\makeworkpackagestable@data}[1]{%
756 \g@addto@macro\makeworkpackagestable@body{#1 \\ \hline}%
757 }
758 \def\makeworkpackagestable@body{}% initialize
759 \AtBeginDocument{\global\let\makeworkpackagestable@body@startup%
760 \makeworkpackagestable@body}
761 \AtEndDocument{%
762 \global\let\makeworkpackagestable@body@end\@empty
763 \def\makeworkpackagestable@data#1%
764 {\g@addto@macro\makeworkpackagestable@body@end{#1 \\ \hline}}%
765 }
766 \AtVeryEndDocument{%
767 \ifx\makeworkpackagestable@body@startup%
768 \makeworkpackagestable@body@end\else
769 \@latex@warning{Rerun for \string\makeworkpackagestable}%
770 \fi
771 }
772 % \end{macrocode}
773 %
774 % Work packages table
775 %
776 % \begin{macrocode}
777 \RequirePackage{makecell}
778 \newcommand{\makeworkpackagestable}{%
779 \begin{center}
780 \renewcommand\theadfont{\normalsize\bfseries}
781 \begin{xltabular}{1.0\textwidth}{|c|X|c|c|c|c|c|}
782 \hline
783 \rowcolor{tablegrey}%
784 \thead{Work\\ package\\ No.} &
785 \thead{Work package title} &
786 \thead{Lead\\ participant\\ No.} &
787 \thead{Lead\\ participant\\ short name} &
788 \thead{Person-\\months} &
789 \thead{Start\\ month} &
790 \thead{End\\ month} \\
791 \hline
792 \makeworkpackagestable@body
793 \end{xltabular}
794 \end{center}
795 }
796 % \end{macrocode}
797 %
798 % Get work package number from short name
799 %
800 % \begin{macrocode}
801 \newcommand{\getWPnum}[1]{%
802 \@ifundefined{c@@wp#1num}{}{\arabic{@wp#1num}}%
803 }
804 % \end{macrocode}
805 %
806 % Work package objectives
807 %
808 % \begin{macrocode}
809 \newenvironment{objectives}{%
810 \begin{tcolorbox}[colback=white,
811 parbox=false,
812 boxrule=0.75pt,
813 boxsep=0mm,
814 breakable
815 ]%
816 \textsf{\textbf{Objectives}~~~}%
817 \begin{enumerate*}[nolistsep,noitemsep,itemjoin={~---~},%
818 label=\textbf{O\arabic{@wpcount}.\arabic*}]%
819 }{%
820 \end{enumerate*}%
821 \end{tcolorbox}%
822 }
823 % \end{macrocode}
824 %
825 % Work package description
826 %
827 % \begin{macrocode}
828 \newenvironment{descriptionofwork}{%
829 \begin{tcolorbox}[colback=white,
830 parbox=false,
831 boxrule=0.75pt,
832 boxsep=0mm,
833 breakable
834 ]%
835 \textsf{\textbf{Description of work}~~~}
836 }{%
837 \end{tcolorbox}%
838 }
839 % \end{macrocode}
840 %
841 % Tasks
842 %
843 % \begin{macrocode}
844 \NewDocumentCommand{\task}{mmmm}{%
845 \stepcounter{@wp\arabic{@wpcount}task}
846 \par\medskip\noindent\textbf{Task %
847 \arabic{@wpcount}.\arabic{@wp\arabic{@wpcount}task}: #1}
848 \textit{(Lead: #2; Participants: #3; Month: #4)}\hspace{1em}%
849 }
850 % \end{macrocode}
851 %
852 % \subsection*{Deliverables}
853 %
854 % \begin{macrocode}
855 \newcounter{@dcount} % Deliverable counter
856 \newcommand{\deliverable}[6]{%
857 \stepcounter{@wp\arabic{@wpcount}deliverable}%
858 \stepcounter{@dcount}%
859 \expandafter\xdef\csname @dNumber\arabic{@dcount}\endcsname%
860 {\arabic{@wpcount}.\arabic{@wp\arabic{@wpcount}deliverable}}%
861 \expandafter\xdef\csname %
862 @dWorkPackage\arabic{@dcount}\endcsname{\arabic{@wpcount}}%
863 \expandafter\xdef\csname @dName\arabic{@dcount}\endcsname{#1}%
864 \expandafter\gdef\csname @dDescription\arabic{@dcount}\endcsname{#2}%
865 \expandafter\xdef\csname @dLead\arabic{@dcount}\endcsname{#3}%
866 \expandafter\xdef\csname @dType\arabic{@dcount}\endcsname{#4}%
867 \expandafter\xdef\csname %
868 @dDisseminationLevel\arabic{@dcount}\endcsname{#5}%
869 \expandafter\xdef\csname @dDeliveryDate\arabic{@dcount}\endcsname{#6}%
870 }
871 % \end{macrocode}
872 %
873 % Deliverables table row
874 %
875 % \begin{macrocode}
876 \newcommand{\dtablerow}[1]{%
877 \stepcounter{#1}
878 \disptoken{@dNumber\arabic{#1}} &
879 \disptoken{@dName\arabic{#1}} &
880 \disptoken{@dDescription\arabic{#1}} &
881 \disptoken{@dWorkPackage\arabic{#1}} &
882 \disptoken{@dLead\arabic{#1}} &
883 \disptoken{@dType\arabic{#1}} &
884 \disptoken{@dDisseminationLevel\arabic{#1}} &
885 \disptoken{@dDeliveryDate\arabic{#1}} \\
886 \hline%
887 }
888 % \end{macrocode}
889 %
890 % Deliverables table
891 %
892 % \begin{macrocode}
893 \newcommand{\makedeliverablestable}{%
894 \newcounter{@dtable}
895 \begin{center}
896 \renewcommand\theadfont{\normalsize\bfseries}
897 \begin{xltabular}{1.0\textwidth}%
898 {|c|>{\raggedright\hsize=.667\hsize\linewidth=\hsize}X%
899 |>{\hsize=1.333\hsize\linewidth=\hsize}X|c|c|c|c|p{15mm}|}
900 \hline
901 \rowcolor{tablegrey}%
902 \thead{\#} &
903 \thead{Name} &
904 \thead{Short description} &
905 \thead{WP\\ \#} &
906 \thead{Lead\\ participant} &
907 \thead{Type} &
908 \thead{Dissem.\\ level} &
909 \thead{Delivery\\ month} \\
910 \hline
911 \whiledo%
912 {\value{@dtable}<\numexpr\value{@dcount}-1}%
913 {\dtablerow{@dtable}}%
914 \dtablerow{@dtable}
915 \end{xltabular}
916 \end{center}
917 }
918 % \end{macrocode}
919 %
920 % \subsection*{Milestones}
921 %
922 % \begin{macrocode}
923 \newcounter{@mcount} % Milestone counter
924 \newcommand{\milestone}[4]{%
925 \stepcounter{@mcount}%
926 \expandafter\gdef\csname @mName\arabic{@mcount}\endcsname{#1}%
927 \expandafter\xdef\csname @mWorkPackages\arabic{@mcount}\endcsname{#2}%
928 \expandafter\xdef\csname @mDueDate\arabic{@mcount}\endcsname{#3}%
929 \expandafter\xdef\csname %
930 @mMeansOfVerification\arabic{@mcount}\endcsname{#4}%
931 }
932 % \end{macrocode}
933 %
934 % Milestones table row
935 %
936 % \begin{macrocode}
937 \newcommand{\mtablerow}[1]{%
938 \stepcounter{#1}
939 \arabic{#1} &
940 \disptoken{@mName\arabic{#1}} &
941 \disptoken{@mWorkPackages\arabic{#1}} &
942 \disptoken{@mDueDate\arabic{#1}} &
943 \disptoken{@mMeansOfVerification\arabic{#1}} \\
944 \hline%
945 }
946 % \end{macrocode}
947 %
948 % Milestones table
949 %
950 % \begin{macrocode}
951 \newcommand{\makemilestonestable}{%
952 \newcounter{@mtable}
953 \begin{center}
954 \renewcommand\theadfont{\normalsize\bfseries}
955 \begin{xltabular}{1.0\textwidth}{|c|X|p{26mm}|c|p{26mm}|}
956 \hline
957 \rowcolor{tablegrey}%
958 \thead{\#} &
959 \thead{Milestone\\ name} &
960 \thead{Related\\ WP(s)} &
961 \thead{Month\\ due} &
962 \thead{Means of\\ verification} \\
963 \hline
964 \whiledo%
965 {\value{@mtable}<\numexpr\value{@mcount}-1}%
966 {\mtablerow{@mtable}}%
967 \mtablerow{@mtable}
968 \end{xltabular}
969 \end{center}
970 }
971 % \end{macrocode}
972 %
973 % \subsection*{Critical risks}
974 %
975 % \begin{macrocode}
976 \newtcbox{\risktag}[1][black]{%
977 fontupper=\scriptsize\sffamily\bfseries,%
978 on line,%
979 arc=3pt,%
980 colupper=white,%
981 colback=#1!50!black,%
982 colframe=#1!50!black,%
983 before upper={\rule[-3pt]{0pt}{10pt}},%
984 boxrule=1pt,%
985 boxsep=0pt,%
986 left=2pt,%
987 right=2pt,%
988 top=1pt,%
989 bottom=.5pt%
990 }
991 \newcounter{@crcount} % Critical risk counter
992 \newcommand{\criticalrisk}[5]{%
993 \stepcounter{@crcount}%
994 \expandafter\gdef\csname %
995 @crDescription\arabic{@crcount}\endcsname{#1}%
996 \expandafter\xdef\csname @crLikelihood\arabic{@crcount}\endcsname{#2}%
997 \expandafter\xdef\csname @crSeverity\arabic{@crcount}\endcsname{#3}%
998 \expandafter\xdef\csname %
999 @crWorkPackages\arabic{@crcount}\endcsname{#4}%
1000 \expandafter\gdef\csname @crMitigation\arabic{@crcount}\endcsname{#5}%
1001 }
1002 % \end{macrocode}
1003 %
1004 % Critical risk table row
1005 %
1006 % \begin{macrocode}
1007 \newcommand{\crtablerow}[1]{%
1008 \stepcounter{#1}%
1009 \disptoken{@crDescription\arabic{#1}}\newline
1010 \risktag[blue]{Likelihood: \disptoken{@crLikelihood\arabic{#1}}}
1011 \risktag[red]{Severity: \disptoken{@crSeverity\arabic{#1}}} &
1012 \disptoken{@crWorkPackages\arabic{#1}} &
1013 \disptoken{@crMitigation\arabic{#1}} \\
1014 \hline%
1015 }
1016 % \end{macrocode}
1017 %
1018 % Critical risks table
1019 %
1020 % \begin{macrocode}
1021 \newcommand{\makecriticalriskstable}{%
1022 \newcounter{@crtable}
1023 \begin{center}
1024 \renewcommand\theadfont{\normalsize\bfseries}
1025 \begin{xltabular}{1.0\textwidth}{|p{60mm}|c|X|}
1026 \hline
1027 \rowcolor{tablegrey}%
1028 \thead{Description of risk (indicate level of\\ %
1029 (i) likelihood, and (ii) severity:\\ %
1030 Low\slash Medium\slash High)} &
1031 \thead{WP(s)\\ involved} &
1032 \thead{Proposed risk-mitigation measures} \\
1033 \hline
1034 \whiledo%
1035 {\value{@crtable}<\numexpr\value{@crcount}-1}%
1036 {\crtablerow{@crtable}}%
1037 \crtablerow{@crtable}
1038 \end{xltabular}
1039 \end{center}
1040 }
1041 % \end{macrocode}
1042 %
1043 % \subsection*{Staff effort}
1044 %
1045 % \begin{macrocode}
1046 \newcommand{\staffeffort}[3]{%
1047 \expandafter\xdef\csname @se#1.#2\endcsname{#3}%
1048 }
1049 % \end{macrocode}
1050 %
1051 % Summary of staff effort table row
1052 %
1053 % \begin{macrocode}
1054 \newcommand{\setablerow}[1]{%
1055 \def\serowtotal{0}%
1056 \setcounter{@secolumn}{0}%
1057 \bfseries\the\value{#1} \disptoken{@pShortName\arabic{#1}}%
1058 \edef\serowtemp{}%
1059 \whiledo{\value{@secolumn}<\value{@wpcount}}{%
1060 \stepcounter{@secolumn}%
1061 \edef\sewpname{\disptoken{@wpShortName\the\value{@secolumn}}}%
1062 \edef\sewpcell%
1063 {\disptoken{@se\disptoken{@pShortName\the\value{#1}}.\sewpname}}%
1064 \edef\serowtotal%
1065 {\fpeval{\serowtotal + \sewpcell}}% Total PMs per participant
1066 \xdef\setotalpm{\fpeval{\setotalpm + \sewpcell}}% Total PMs
1067 \expandafter\xdef\csname %
1068 @wpPersonMonths\arabic{@secolumn}\endcsname{\fpeval{%
1069 \sewpcell+\csname %
1070 @wpPersonMonths\arabic{@secolumn}\endcsname}}% Total PMs per WP
1071 \IfEq% If...
1072 {\disptoken{@pShortName\the\value{#1}}}% ...the current PI
1073 {\disptoken{@wpLeadParticipantShortName%
1074 \the\value{@secolumn}}}% ...is the WP lead
1075 {\protected@edef\seformat{\bfseries}}% ...then apply boldface
1076 {\edef\seformat{}}% ...otherwise don't.
1077 \protected@edef\serowtemp%
1078 {\serowtemp&\seformat \sewpcell}% Print PI's PMs for this WP
1079 }%
1080 \protected@edef\serowtemp{\serowtemp&\fpeval{round(\serowtotal,0)}}%
1081 \serowtemp%
1082 \stepcounter{#1}%
1083 }
1084 % \end{macrocode}
1085 %
1086 % Summary of staff effort table
1087 %
1088 % \begin{macrocode}
1089 \newcommand{\makestaffefforttable}{%
1090 \newcounter{@setable}
1091 \stepcounter{@setable}
1092 \newcounter{@secolumn}
1093 \xdef\setotalpm{0}
1094 \edef\serowtemp{}
1095 \begin{center}
1096 \renewcommand\theadfont{\normalsize\bfseries}
1097 \begin{xltabular}{1.0\textwidth}%
1098 {|>{\columncolor{tablegrey}}l|*{\value{@wpcount}}{r|}%
1099 >{\columncolor{tablegrey}}r|}
1100 \hline
1101 % Table header
1102 \rowcolor{tablegrey}%
1103 \whiledo{\value{@secolumn}<\value{@wpcount}}{%
1104 \stepcounter{@secolumn}%
1105 \protected@edef\serowtemp%
1106 {\serowtemp&\protect\thead{WP\the\value{@secolumn}}}%
1107 }
1108 \serowtemp & \thead{Total PMs\\ per Participant} \\
1109 \hline
1110 % Participant rows
1111 \whiledo%
1112 {\value{@setable}<\numexpr\value{@pcount}}%
1113 {\setablerow{@setable}\\ \hline}%
1114 \setablerow{@setable} \\ \hline%
1115 % Total
1116 \rowcolor{tablegrey}%
1117 \setcounter{@secolumn}{0}
1118 \bfseries Total PMs
1119 \whiledo{\value{@secolumn}<\value{@wpcount}}{%
1120 \stepcounter{@secolumn}%
1121 \edef\serowtemp{\serowtemp&\fpeval{round(\csname %
1122 @wpPersonMonths\arabic{@secolumn}\endcsname/2,0)}}%
1123 \@bsphack
1124 \protected@write\@auxout{}%
1125 {\string\expandafter\string\expandafter\string\expandafter%
1126 \string\gdef\string\disptoken{@wpTotalPersonMonths%
1127 \arabic{@secolumn}}{\fpeval{round(\disptoken{@wpPersonMonths%
1128 \arabic{@secolumn}},0)}}}%
1129 \@esphack
1130 }
1131 \serowtemp & \fpeval{round(\setotalpm/2,0)} \\
1132 \hline
1133 \end{xltabular}
1134 \end{center}
1135 }
1136 % \end{macrocode}
1137 %
1138 % \subsection*{Subcontracting costs}
1139 %
1140 % \begin{macrocode}
1141 \newcommand{\subcontractingcost}[3]{%
1142 \stepcounter{@pSubcontractingCosts\getPnum{#1}}
1143 \expandafter\xdef\csname %
1144 @scCost\getPnum{#1}.\arabic{@pSubcontractingCosts\getPnum{#1}}%
1145 \endcsname{#2}%
1146 \expandafter\xdef\csname %
1147 @scJustification\getPnum{#1}.\arabic{@pSubcontractingCosts\getPnum%
1148 {#1}}\endcsname{#3}%
1149 }
1150 % \end{macrocode}
1151 %
1152 % Subcontracting costs table
1153 %
1154 % \begin{macrocode}
1155 \newcommand{\makesubcontractingcoststable}{%
1156 \newcounter{@scparticipant}
1157 \begin{center}
1158 % For each participant
1159 \whiledo{\value{@scparticipant}<\value{@pcount}}{%
1160 \stepcounter{@scparticipant}%
1161 \ifthenelse%
1162 {\value{@pSubcontractingCosts\arabic%
1163 {@scparticipant}}>0}% If they have subcontracting costs
1164 {\sctablesection%
1165 {@scparticipant}}% Print their subcontracting costs table
1166 {}% Otherwise, do nothing
1167 }%
1168 \end{center}
1169 }
1170 % \end{macrocode}
1171 %
1172 % Subcontracting costs table section
1173 %
1174 % \begin{macrocode}
1175 \newcommand{\sctablesection}[1]{%
1176 \newcounter{@sccost\arabic{#1}}
1177 \edef\scrowtemp{}
1178 \renewcommand\theadfont{\normalsize\bfseries}
1179 \begin{xltabular}{\textwidth}{|>{\columncolor{tablegrey}}l|r|X|}
1180 \hline
1181 \rowcolor{tablegrey}
1182 \multicolumn{3}{|l|}{\bfseries\the\value{#1} %
1183 \disptoken{@pShortName\arabic{#1}}} \\
1184 \hline
1185 \rowcolor{tablegrey}
1186 & \thead{Cost (€)}
1187 & \thead{Description of tasks and justification} \\
1188 \hline
1189 % For each subcontracting cost
1190 \whiledo%
1191 {\value{@sccost\arabic{#1}}<\numexpr\value%
1192 {@pSubcontractingCosts\arabic{#1}}-1}{%
1193 \stepcounter{@sccost\arabic{#1}}%
1194 \sctablerow{#1}{@sccost\arabic{#1}}%
1195 }%
1196 \stepcounter{@sccost\arabic{#1}}%
1197 \sctablerow{#1}{@sccost\arabic{#1}}%
1198 \end{xltabular}
1199 }
1200 % \end{macrocode}
1201 %
1202 % Subcontracting costs table row
1203 %
1204 % \begin{macrocode}
1205 \newcommand{\sctablerow}[2]{%
1206 \thead{Subcontracting} &
1207 \disptoken{@scCost\arabic{#1}.\arabic{#2}} &
1208 \disptoken{@scJustification\arabic{#1}.\arabic{#2}}
1209 \\ \hline
1210 }
1211 % \end{macrocode}
1212 %
1213 % \subsection*{Other costs}
1214 %
1215 % \begin{macrocode}
1216 \newcommand{\othercost}[3]{%
1217 \stepcounter{@pOtherCosts\getPnum{#1}}
1218 \expandafter\xdef\csname %
1219 @ocCost\getPnum{#1}.\arabic{@pOtherCosts\getPnum{#1}}\endcsname{#2}%
1220 \expandafter\xdef\csname %
1221 @ocJustification\getPnum{#1}.\arabic%
1222 {@pOtherCosts\getPnum{#1}}\endcsname{#3}%
1223 }
1224 % \end{macrocode}
1225 %
1226 % Other costs table
1227 %
1228 % \begin{macrocode}
1229 \newcommand{\makeothercoststable}{%
1230 \newcounter{@ocparticipant}
1231 \begin{center}
1232 % For each participant
1233 \whiledo{\value{@ocparticipant}<\value{@pcount}}{%
1234 \stepcounter{@ocparticipant}%
1235 \ifthenelse%
1236 {\value{@pOtherCosts\arabic%
1237 {@ocparticipant}}>0}% If they have other costs
1238 {\octablesection{@ocparticipant}}% Print their other costs table
1239 {}% Otherwise, do nothing
1240 }%
1241 \end{center}
1242 }
1243 % \end{macrocode}
1244 %
1245 % Other costs table section
1246 %
1247 % \begin{macrocode}
1248 \newcommand{\octablesection}[1]{%
1249 \newcounter{@occost\arabic{#1}}
1250 \edef\ocrowtemp{}
1251 \renewcommand\theadfont{\normalsize\bfseries}
1252 \begin{xltabular}{\textwidth}{|>{\columncolor{tablegrey}}l|r|X|}
1253 \hline
1254 \rowcolor{tablegrey}
1255 \multicolumn{3}{|l|}{\bfseries\the\value{#1} %
1256 \disptoken{@pShortName\arabic{#1}}} \\
1257 \hline
1258 \rowcolor{tablegrey}
1259 & \thead{Cost (€)} & \thead{Justification} \\
1260 \hline
1261 % For each other cost
1262 \whiledo%
1263 {\value{@occost\arabic{#1}}<\numexpr\value%
1264 {@pOtherCosts\arabic{#1}}-1}{%
1265 \stepcounter{@occost\arabic{#1}}%
1266 \octablerow{#1}{@occost\arabic{#1}}%
1267 }%
1268 \stepcounter{@occost\arabic{#1}}%
1269 \octablerow{#1}{@occost\arabic{#1}}%
1270 \end{xltabular}
1271 }
1272 % \end{macrocode}
1273 %
1274 % Other costs table row
1275 %
1276 % \begin{macrocode}
1277 \newcommand{\octablerow}[2]{%
1278 \thead{Internally invoiced\\ goods and services} &
1279 \disptoken{@ocCost\arabic{#1}.\arabic{#2}} &
1280 \disptoken{@ocJustification\arabic{#1}.\arabic{#2}}
1281 \\ \hline
1282 }
1283 % \end{macrocode}
1284 %
1285 % \subsection*{Purchase costs}
1286 %
1287 % \begin{macrocode}
1288 \newcommand{\purchasecost}[8]{%
1289 \stepcounter{@pPurchaseCosts\getPnum{#1}}
1290 \expandafter\xdef\csname @pcTravelCost\getPnum{#1}\endcsname{#2}%
1291 \expandafter\xdef\csname %
1292 @pcTravelJustification\getPnum{#1}\endcsname{#3}%
1293 \expandafter\xdef\csname @pcEquipmentCost\getPnum{#1}\endcsname{#4}%
1294 \expandafter\xdef\csname %
1295 @pcEquipmentJustification\getPnum{#1}\endcsname{#5}%
1296 \expandafter\xdef\csname @pcOtherCost\getPnum{#1}\endcsname{#6}%
1297 \expandafter\xdef\csname %
1298 @pcOtherJustification\getPnum{#1}\endcsname{#7}%
1299 \expandafter\xdef\csname @pcRemainingCost\getPnum{#1}\endcsname{#8}%
1300 \expandafter\xdef\csname %
1301 @pcTotalCost\getPnum{#1}\endcsname%
1302 {\the\numexpr #2+#4+#6+#8 \relax}% TO DO
1303 % \expandafter\xdef\csname @pcTotalCost\getPnum{#1}\endcsname{100}%
1304 }
1305 % \end{macrocode}
1306 %
1307 % Purchase costs table
1308 %
1309 % \begin{macrocode}
1310 \newcommand{\makepurchasecoststable}{%
1311 \newcounter{@pcparticipant}
1312 \begin{center}
1313 % For each participant
1314 \whiledo{\value{@pcparticipant}<\value{@pcount}}{%
1315 \stepcounter{@pcparticipant}%
1316 \ifthenelse%
1317 {\value{@pPurchaseCosts\arabic%
1318 {@pcparticipant}}>0}% If they have purchase costs
1319 {\pctablesection%
1320 {@pcparticipant}}% Print their purchase costs table
1321 {}% Otherwise, do nothing
1322 }%
1323 \end{center}
1324 }
1325 % \end{macrocode}
1326 %
1327 % Purchase costs table section
1328 %
1329 % \begin{macrocode}
1330 \newcommand\swap[2]{
1331 \let\pcTemp#1
1332 \let#1#2
1333 \let#2\pcTemp
1334 }
1335 \newcommand{\pctablesection}[1]{%
1336 \newcounter{@pccost\arabic{#1}}
1337 % Define table rows
1338 \def\pcRowA{%
1339 \thead{Travel and subsistence} &
1340 \disptoken{@pcTravelCost\arabic{#1}} &
1341 \disptoken{@pcTravelJustification\arabic{#1}}
1342 }%
1343 \edef\pcCostA{\disptoken{@pcTravelCost\arabic{#1}}}%
1344 \def\pcRowB{%
1345 \thead{Equipment} &
1346 \disptoken{@pcEquipmentCost\arabic{#1}} &
1347 \disptoken{@pcEquipmentJustification\arabic{#1}}
1348 }%
1349 \edef\pcCostB{\disptoken{@pcEquipmentCost\arabic{#1}}}%
1350 \def\pcRowC{%
1351 \thead{Other goods, works\\ and services} &
1352 \disptoken{@pcOtherCost\arabic{#1}} &
1353 \disptoken{@pcOtherJustification\arabic{#1}}
1354 }%
1355 \edef\pcCostC{\disptoken{@pcOtherCost\arabic{#1}}}%
1356 % Sort table rows
1357 \ifthenelse{\pcCostA<\pcCostC}{%
1358 \swap{\pcRowA}{\pcRowC}
1359 \swap{\pcCostA}{\pcCostC}
1360 }{}
1361 \ifthenelse{\pcCostA<\pcCostB}{%
1362 \swap{\pcRowA}{\pcRowB}
1363 \swap{\pcCostA}{\pcCostB}
1364 }{}
1365 \ifthenelse{\pcCostB<\pcCostC}{%
1366 \swap{\pcRowC}{\pcRowB}
1367 \swap{\pcCostC}{\pcCostB}
1368 }{}
1369
1370 \renewcommand\theadfont{\normalsize\bfseries}
1371 \begin{xltabular}{\textwidth}{|>{\columncolor{tablegrey}}p{43mm}|r|X|}
1372 \hline
1373 \rowcolor{tablegrey}
1374 \multicolumn{3}{|l|}{\bfseries\the\value{#1} %
1375 \disptoken{@pShortName\arabic{#1}}} \\
1376 \hline
1377 \rowcolor{tablegrey}
1378 & \thead{Cost (€)} & \thead{Justification} \\
1379 \hline
1380 % Output purchase costs in sorted order
1381 \pcRowA \\ \hline
1382 \pcRowB \\ \hline
1383 \pcRowC \\ \hline
1384 % Output remaining and total costs
1385 \thead{Remaining purchase\\ costs (<15\% of pers.\\ costs)}
1386 & \disptoken{@pcRemainingCost\arabic{#1}} \\
1387 \cline{1-2}
1388 \thead{Total} & \disptoken{@pcTotalCost\arabic{#1}} \\
1389 \cline{1-2}
1390 \end{xltabular}
1391 }
1392 % \end{macrocode}
1393 %
1394 % \subsection*{In-kind contributions}
1395 %
1396 % \begin{macrocode}
1397 \newcommand{\inkindcontribution}[5]{%
1398 \stepcounter{@pInkindContributions\getPnum{#1}}
1399 \expandafter\xdef\csname %
1400 @ikcThirdPartyName\getPnum{#1}.\arabic%
1401 {@pInkindContributions\getPnum{#1}}\endcsname{#2}%
1402 \expandafter\xdef\csname %
1403 @ikcCategory\getPnum{#1}.\arabic%
1404 {@pInkindContributions\getPnum{#1}}\endcsname{#3}%
1405 \expandafter\xdef\csname %
1406 @ikcCost\getPnum{#1}.\arabic%
1407 {@pInkindContributions\getPnum{#1}}\endcsname{#4}%
1408 \expandafter\xdef\csname %
1409 @ikcJustification\getPnum{#1}.\arabic%
1410 {@pInkindContributions\getPnum{#1}}\endcsname{#5}%
1411 }
1412 % \end{macrocode}
1413 %
1414 % In-kind contributions table
1415 %
1416 % \begin{macrocode}
1417 \newcommand{\makeinkindcontributionstable}{%
1418 \newcounter{@ikcparticipant}
1419 \begin{center}
1420 % For each participant
1421 \whiledo{\value{@ikcparticipant}<\value{@pcount}}{%
1422 \stepcounter{@ikcparticipant}%
1423 \ifthenelse%
1424 {\value{@pInkindContributions\arabic%
1425 {@ikcparticipant}}>0}% If they have in-kind contributions
1426 {\ikctablesection%
1427 {@ikcparticipant}}% Print their in-kind contributions table
1428 {}% Otherwise, do nothing
1429 }%
1430 \end{center}
1431 }
1432 % \end{macrocode}
1433 %
1434 % In-kind contributions table section
1435 %
1436 % \begin{macrocode}
1437 \newcommand{\ikctablesection}[1]{%
1438 \newcounter{@ikccost\arabic{#1}}
1439 \edef\ikcrowtemp{}
1440 \renewcommand\theadfont{\normalsize\bfseries}
1441 \begin{xltabular}{\textwidth}%
1442 {|>{\raggedright}p{40mm}|>{\raggedright}p{35mm}|r|X|}
1443 \hline
1444 \rowcolor{tablegrey}
1445 \multicolumn{4}{|l|}{\bfseries\the\value{#1} %
1446 \disptoken{@pShortName\arabic{#1}}} \\
1447 \hline
1448 \rowcolor{tablegrey}
1449 \thead{Third party name} & \thead{Category} &
1450 \thead{Cost (€)} & \thead{Justification} \\
1451 \hline
1452 % For each in-kind contribution
1453 \whiledo%
1454 {\value{@ikccost\arabic{#1}}<\numexpr\value%
1455 {@pInkindContributions\arabic{#1}}-1}{%
1456 \stepcounter{@ikccost\arabic{#1}}%
1457 \ikctablerow{#1}{@ikccost\arabic{#1}}%
1458 }%
1459 \stepcounter{@ikccost\arabic{#1}}%
1460 \ikctablerow{#1}{@ikccost\arabic{#1}}%
1461 \end{xltabular}
1462 }
1463 % \end{macrocode}
1464 %
1465 % In-kind contributions table row
1466 %
1467 % \begin{macrocode}
1468 \newcommand{\ikctablerow}[2]{%
1469 \disptoken{@ikcThirdPartyName\arabic{#1}.\arabic{#2}} &
1470 \disptoken{@ikcCategory\arabic{#1}.\arabic{#2}} &
1471 \disptoken{@ikcCost\arabic{#1}.\arabic{#2}} &
1472 \disptoken{@ikcJustification\arabic{#1}.\arabic{#2}}
1473 \\ \hline
1474 }
1475 % \end{macrocode}
1476 %
1477 % \subsection*{Summary canvas}
1478 %
1479 % \begin{macrocode}
1480 \RequirePackage{pdflscape} % PDF landscape for Summary canvas
1481 \newenvironment{summarycanvas}{%
1482 \begin{tcbraster}[%
1483 raster columns=3,
1484 ]%
1485 }{%
1486 \end{tcbraster}%
1487 }
1488 \newenvironment{summarybox}[1]{%
1489 \begin{tcolorbox}[%
1490 colframe=summaryblue,
1491 colbacktitle=summaryblue,
1492 %height fill,
1493 fonttitle=\bfseries\sffamily,
1494 halign title=center,
1495 title={#1}
1496 ]
1497 }{%
1498 \end{tcolorbox}%
1499 }
1500 % \end{macrocode}
1501 %
1502 % Code for sideways figures, adapted from
1503 % \url{https://tex.stackexchange.com/a/307142/22603}.
1504 % Copyright 2016 John Kormylo and licensed under the Creative Commons
1505 % Attribution-ShareAlike 4.0 license (CC~BY-SA~4.0), per personal
1506 % communication with Tristan Miller on 2023-12-02.
1507 %
1508 % \begin{macrocode}
1509 \RequirePackage{environ}
1510 \newcounter{abspage}% \thepage not reliab
1511 \newcommand{\newSFPage}[1]% #1 = \theabspage
1512 {\global\expandafter\let\csname SFPage@#1\endcsname\null}
1513 \NewEnviron{SidewaysFigure}{\begin{figure}[p]
1514 \protected@write\@auxout%
1515 {\let\theabspage=\relax}% delays expansion until shipout
1516 {\string\newSFPage{\theabspage}}%
1517 \ifdim\textwidth=\textheight
1518 \rotatebox{90}{\parbox[c][\textwidth][c]{\linewidth}{\BODY}}%
1519 \else
1520 \rotatebox{90}{\parbox[c][\textwidth][c]{\textheight}{\BODY}}%
1521 \fi
1522 \end{figure}}
1523 \AddToHook{shipout/background}{% check if sideways figure on this page
1524 \put(1in,-1in){%
1525 \ifdim\textwidth=\textheight
1526 \stepcounter{abspage}% already in landscape
1527 \else
1528 \@ifundefined{SFPage@\theabspage}{}{\global\pdfpageattr{/Rotate 0}}%
1529 \stepcounter{abspage}%
1530 \@ifundefined{SFPage@\theabspage}{}%
1531 {\global\pdfpageattr{/Rotate 90}}%
1532 \fi}%
1533 }
1534 % \end{macrocode}
1535 %
1536 % \subsection*{Font setup}
1537 %
1538 % \begin{macrocode}
1539 \RequirePackage{newtxtext} % Use Times for main text
1540 \RequirePackage{newtxmath} % Use Times for math
1541 \renewcommand*\ttdefault{lmvtt} % Latin Modern Typewriter Proportional
1542 % \end{macrocode}
1543 %
1544 % \subsection*{Page header and footer}
1545 %
1546 % \begin{macrocode}
1547 \RequirePackage{lastpage}
1548 \RequirePackage{fancyhdr}
1549 \newcommand{\Paragraph}[1]{\vspace*{-.45em}\paragraph{#1.}}
1550 \pagestyle{fancy}
1551 \renewcommand{\headrulewidth}{0pt} % Remove line at top
1552 \lhead{\sffamily\scriptsize Call: \@callidentifier\ --- \@callname}
1553 \rhead{}
1554 \chead{}
1555 \cfoot{\raisebox{\dimexpr(-\height+\ht\strutbox-\dp\strutbox)/2}{%
1556 \begin{tcolorbox}[nobeforeafter,
1557 fontupper=\scriptsize\sffamily,
1558 colback=footergrey,
1559 boxrule=0.75pt,
1560 halign=center,
1561 boxsep=0mm,
1562 ]%
1563 \strut Part~B -- Page \thepage\ of \pageref*{LastPage}%
1564 \end{tcolorbox}%
1565 }%
1566 }
1567 % \end{macrocode}
1568 %
1569 % \subsection*{Titles and section headings}
1570 %
1571 % Document title
1572 %
1573 % \begin{macrocode}
1574 \def\@maketitle{%
1575 \newpage%
1576 \noindent%
1577 \large%
1578 \framebox[\textwidth]%
1579 {\null\hfill\textsf{\textbf{\textsc{\@title}}}\hfill\null}%
1580 \par
1581 \vskip 1.5em\thispagestyle{fancy}%
1582 \ifdefined\@calltopic
1583 \vspace{-5mm}
1584 \begin{center}
1585 Topic: \@calltopic
1586 \end{center}
1587 \fi
1588 }
1589 % \end{macrocode}
1590 %
1591 % Format page limits used by the Horizon Europe template
1592 %
1593 % \begin{macrocode}
1594 \NewDocumentCommand{\showpagelimit}{m}
1595 {%
1596 \ifheria@showinstructions%
1597 {\normalfont\sffamily\itshape [e.g.\ #1]}%
1598 \fi%
1599 }
1600 % \end{macrocode}
1601 %
1602 % Format ``tags'' used by the Horizon Europe template
1603 %
1604 % \begin{macrocode}
1605 \ExplSyntaxOn
1606 \NewDocumentCommand{\hetag}{mm}
1607 {%
1608 \textcolor{taggrey}{\normalfont\sffamily\footnotesize%
1609 \clist_map_inline:nn { #2 } { \# #1 ##1 #1 \# ~}%
1610 }%
1611 }
1612 \ExplSyntaxOff
1613 \NewDocumentCommand{\opentag}{m}{\hetag{@}{#1}}
1614 \NewDocumentCommand{\closetag}{m}{\noindent\hetag{§}{#1}}
1615 % \end{macrocode}
1616 %
1617 % Format section titles, with optional opening and closing tags
1618 %
1619 % \begin{macrocode}
1620 \RequirePackage[explicit]{titlesec}
1621 \titleformat{\section}
1622 {\normalfont\normalsize\bfseries\sffamily}%
1623 {\thesection}{1em}{#1 \sectiontag\sectionpagelimit}
1624 \titleformat{\subsection}
1625 {\normalfont\normalsize\bfseries\sffamily}%
1626 {\thesubsection}{1em}{#1 \sectiontag\sectionpagelimit}
1627 \titleformat{\subsubsection}
1628 {\normalfont\normalsize\bfseries\sffamily}%
1629 {\thesubsubsection}{1em}{#1 \sectiontag\sectionpagelimit}
1630 \NewDocumentCommand{\extendedsection}{sO{#3}mooo}{%
1631 \IfValueTF{#4}%
1632 {\renewcommand{\sectiontag}{\opentag{#4}}}%
1633 {\renewcommand{\sectiontag}{}}%
1634 \IfValueTF{#6}%
1635 {\renewcommand{\sectionpagelimit}{\showpagelimit{#6}}}%
1636 {\renewcommand{\sectionpagelimit}{}}%
1637 \IfValueT{#5}{%
1638 \closetag{#5}%
1639 }%
1640 \IfBooleanTF{#1}{%
1641 \latexsection*{#3}%
1642 }{%
1643 \latexsection[#2]{#3}%
1644 }%
1645 }
1646 \NewDocumentCommand{\extendedsubsection}{sO{#3}mooo}{%
1647 \IfValueTF{#4}%
1648 {\renewcommand{\sectiontag}{\opentag{#4}}}%
1649 {\renewcommand{\sectiontag}{}}%
1650 \IfValueTF{#6}%
1651 {\renewcommand{\sectionpagelimit}{\showpagelimit{#6}}}%
1652 {\renewcommand{\sectionpagelimit}{}}%
1653 \IfValueT{#5}{%
1654 \closetag{#5}%
1655 }%
1656 \IfBooleanTF{#1}{%
1657 \latexsubsection*{#3}%
1658 }{%
1659 \latexsubsection[#2]{#3}%
1660 }%
1661 }
1662 \NewDocumentCommand{\extendedsubsubsection}{sO{#3}mooo}{%
1663 \IfValueTF{#4}%
1664 {\renewcommand{\sectiontag}{\opentag{#4}}}%
1665 {\renewcommand{\sectiontag}{}}%
1666 \IfValueTF{#6}%
1667 {\renewcommand{\sectionpagelimit}{\showpagelimit{#6}}}%
1668 {\renewcommand{\sectionpagelimit}{}}%
1669 \IfValueT{#5}{%
1670 \closetag{#5}%
1671 }%
1672 \IfBooleanTF{#1}{%
1673 \latexsubsubsection*{#3}%
1674 }{%
1675 \latexsubsubsection[#2]{#3}%
1676 }%
1677 }
1678 \newcommand{\sectiontag}{}
1679 \newcommand{\sectionpagelimit}{}
1680 \AtBeginDocument{%
1681 \NewCommandCopy{\latexsection}{\section}%
1682 \RenewCommandCopy{\section}{\extendedsection}%
1683 \NewCommandCopy{\latexsubsection}{\subsection}%
1684 \RenewCommandCopy{\subsection}{\extendedsubsection}%
1685 \NewCommandCopy{\latexsubsubsection}{\subsubsection}%
1686 \RenewCommandCopy{\subsubsection}{\extendedsubsubsection}%
1687 }
1688 % \end{macrocode}
1689 %
1690 % \subsection*{Official Horizon Europe template instructions}
1691 %
1692 % \begin{macrocode}
1693 \RequirePackage[inline]{enumitem} % For custom bullets
1694 \RequirePackage[normalem]{ulem} % For underlined text
1695 \RequirePackage{kvoptions}
1696 \SetupKeyvalOptions{
1697 family=heria,
1698 prefix=heria@
1699 }
1700 \DeclareBoolOption{showinstructions}
1701 \ProcessKeyvalOptions*
1702
1703 \RequirePackage{twemojis}
1704 \RequirePackage{xspace}
1705 \newcommand{\twarn}{\twemoji{warning}\xspace}
1706 \RequirePackage{verbatim}
1707 \newenvironment{instructions}{%
1708 \begin{tcolorbox}[fontupper=\sffamily,
1709 fonttitle=\sffamily\bfseries,
1710 colback=blue!5!white,
1711 colframe=blue!75!black,
1712 parbox=false,
1713 breakable
1714 ]%
1715 }{%
1716 \end{tcolorbox}%
1717 }
1718
1719 \newcommand{\heinstructions}[1]{%
1720 \ifheria@showinstructions%
1721 \begin{instructions}%
1722 \input{hi-#1}%
1723 \end{instructions}%
1724 \fi%
1725 }
1726 % \end{macrocode}
1727 %\iffalse
1728 %</class>
1729 %<*hi-annexes>
1730 \textbf{ANNEXES TO PROPOSAL PART~B}
1731
1732 Some calls may ask to upload annexes to proposal part~B. The annexes
1733 must be uploaded as separate documents in the submission system. The
1734 most common annexes to be uploaded in Horizon Europe are (standard
1735 templates are published in the Funding \& Tenders portal):
1736
1737 \begin{itemize}
1738 \item
1739 \textbf{CLINICAL TRIALS:} Annex with information on clinical trials
1740 \item
1741 \textbf{FINANCIAL SUPPORT TO THIRD PARTIES:} Annex with information on
1742 financial support to third parties.
1743 \item
1744 \textbf{CALLS FLAGGED AS SECURITY SENSITIVE:} Annex with information
1745 on security aspects.
1746 \item
1747 \textbf{ETHICS:} ethics self-assessment should be included in proposal
1748 part~A. However, in calls where several serious ethics issues are
1749 expected, the character limited in this section of proposal part~A may
1750 not be sufficient for participants to give all necessary information.
1751 In those cases, participants may include additional information in an
1752 annex to proposal part~B.
1753 \end{itemize}
1754 %</hi-annexes>
1755 %<*hi-capacity>
1756 \twarn \emph{The individual participants of the consortium are
1757 described in a separate section under Part~A. There is no need to
1758 repeat that information here.}
1759
1760 \begin{itemize}
1761 \item
1762 Describe the consortium. How does it match the project's objectives,
1763 and bring together the necessary disciplinary and inter-disciplinary
1764 knowledge? Show how this includes expertise in social sciences and
1765 humanities, open science practices, and gender aspects of R\&I, as
1766 appropriate. Include in the description affiliated entities and
1767 associated partners, if any.
1768 \item
1769 Show how the partners will have access to critical infrastructure
1770 needed to carry out the project activities.
1771 \item
1772 Describe how the members complement one another (and cover the value
1773 chain, where appropriate)
1774 \item
1775 In what way does each of them contribute to the project? Show that
1776 each has a valid role, and adequate resources in the project to fulfil
1777 that role.
1778 \item
1779 If applicable, describe the industrial\slash commercial involvement in the
1780 project to ensure exploitation of the results and explain why this is
1781 consistent with and will help to achieve the specific measures which
1782 are proposed for exploitation of the results of the project (see
1783 section~\ref{sec:measures}).
1784 \item
1785 \textbf{Other countries and international organisations}: If one or
1786 more of the participants requesting EU funding is based in a country
1787 or is an international organisation that is not automatically eligible
1788 for such funding (entities from Member States of the EU, from
1789 Associated Countries and from one of the countries in the exhaustive
1790 list included in the Work Programme General Annexes B are
1791 automatically eligible for EU funding), explain why the participation
1792 of the entity in question is essential to successfully carry out the
1793 project.
1794 \end{itemize}
1795 %</hi-capacity>
1796 %<*hi-criticalrisks>
1797 \begin{tcolorbox}[standard jigsaw,opacityback=0]
1798 \textbf{Definition critical risk:}
1799
1800 A critical risk is a plausible event or issue that could have a high
1801 adverse impact on the ability of the project to achieve its objectives.
1802
1803 \textbf{Level of likelihood to occur: Low\slash medium\slash high}
1804
1805 The likelihood is the estimated probability that the risk will
1806 materialise even after taking account of the mitigating measures put in
1807 place.
1808
1809 \textbf{Level of severity: Low\slash medium\slash high}
1810
1811 The relative seriousness of the risk and the significance of its effect.
1812 \end{tcolorbox}
1813 %</hi-criticalrisks>
1814 %<*hi-deliverables-key>
1815 \begin{tcolorbox}[standard jigsaw,opacityback=0]
1816 \textbf{KEY}
1817
1818 Deliverable numbers in order of delivery dates. Please use the numbering
1819 convention \textless WP number\textgreater.\textless number of
1820 deliverable within that WP\textgreater.
1821
1822 For example, deliverable 4.2 would be the second deliverable from work
1823 package 4.
1824
1825 \textbf{Type:}
1826
1827 Use one of the following codes:
1828
1829 \begin{quote}
1830 R: Document, report (excluding the periodic and final reports)
1831
1832 DEM: Demonstrator, pilot, prototype, plan designs
1833
1834 DEC: Websites, patents filing, press \& media actions, videos, etc.
1835
1836 DATA: Data sets, microdata, etc.
1837
1838 DMP: Data management plan
1839
1840 ETHICS: Deliverables related to ethics issues.
1841
1842 SECURITY: Deliverables related to security issues
1843
1844 OTHER: Software, technical diagram, algorithms, models, etc.
1845 \end{quote}
1846
1847 \textbf{Dissemination level:}
1848
1849 Use one of the following codes:
1850
1851 \begin{quote}
1852 PU -- Public, fully open, e.g.\ web (Deliverables flagged as public will
1853 be automatically published in CORDIS project's page)
1854
1855 SEN -- Sensitive, limited under the conditions of the Grant Agreement
1856
1857 Classified R-UE/EU-R -- EU RESTRICTED under the Commission Decision
1858 No2015/444
1859
1860 Classified C-UE/EU-C -- EU CONFIDENTIAL under the Commission Decision
1861 No2015/444
1862
1863 Classified S-UE/EU-S -- EU SECRET under the Commission Decision
1864 No2015/444
1865 \end{quote}
1866
1867 \textbf{Delivery date}
1868
1869 Measured in months from the project start date (month 1)
1870 \end{tcolorbox}
1871 %</hi-deliverables-key>
1872 %<*hi-deliverables>
1873 Only include deliverables that you consider essential for effective
1874 project monitoring.\footnote{You must include a data
1875 management plan (DMP) and a `plan for dissemination and exploitation
1876 including communication activities as distinct deliverables within the
1877 first 6 months of the project. The DMP will evolve during the lifetime
1878 of the project in order to present the status of the
1879 project\textquotesingle s reflections on data management. A template
1880 for such a plan is available in the
1881 \href{https://ec.europa.eu/info/funding-tenders/opportunities/docs/2021-2027/common/guidance/om_en.pdf}{Online
1882 Manual} on the Funding \& Tenders Portal.}
1883 %</hi-deliverables>
1884 %<*hi-excellence>
1885 \begin{tcolorbox}[standard jigsaw,opacityback=0]
1886 \textbf{Excellence – aspects to be taken into account.}
1887 \begin{itemize}
1888 \item Clarity and pertinence of the project’s objectives, and the
1889 extent to which the proposed work is ambitious, and goes beyond
1890 the state of the art.
1891 \item Soundness of the proposed methodology, including the
1892 underlying concepts, models, assumptions, interdisciplinary
1893 approaches, appropriate consideration of the gender dimension in
1894 research and innovation content, and the quality of open science
1895 practices, including sharing and management of research outputs
1896 and engagement of citizens, civil society and end users where
1897 appropriate.
1898 \end{itemize}
1899 \end{tcolorbox}
1900 \noindent \twarn The following aspects will be taken into account
1901 only to the extent that the proposed work is within the scope of the
1902 work programme topic.
1903 %</hi-excellence>
1904 %<*hi-impact>
1905 \begin{tcolorbox}[standard jigsaw,opacityback=0]
1906 \emph{\textbf{Impact -- aspects to be taken into account.}}
1907
1908 \begin{itemize}
1909 \item
1910 Credibility of the pathways to achieve the expected outcomes and
1911 impacts specified in the work programme, and the likely scale and
1912 significance of the contributions due to the project.
1913 \item
1914 Suitability and quality of the measures to maximise expected outcomes
1915 and impacts, as set out in the dissemination and exploitation plan,
1916 including communication activities.
1917 \end{itemize}
1918 \end{tcolorbox}
1919
1920 \noindent\emph{The results of your project should make a contribution to the
1921 expected outcomes set out for the work programme topic over the medium
1922 term, and to the wider expected impacts set out in the `destination'
1923 over the longer term.}
1924
1925 \emph{In this section you should show how your project could contribute
1926 to the outcomes and impacts described in the work programme, the likely
1927 scale and significance of this contribution, and the measures to
1928 maximise these impacts.}
1929 %</hi-impact>
1930 %<*hi-inkind>
1931 Please complete the table below for each participant that will make use
1932 of in-kind contributions (non-financial resources made available free of
1933 charge by third parties). In kind contributions provided by third
1934 parties free of charge are declared by the participants as eligible
1935 direct costs in the corresponding cost category (e.g.\ personnel costs or
1936 purchase costs for equipment).
1937 %</hi-inkind>
1938 %<*hi-measures>
1939 \begin{itemize}
1940 \item
1941 Describe the planned measures to maximise the impact of your project
1942 by providing a first version of your `\uline{plan for the
1943 dissemination and exploitation including communication activities'}.
1944 Describe the dissemination, exploitation and communication measures
1945 that are planned, and the target group(s) addressed (e.g.\ scientific
1946 community, end users, financial actors, public at large).
1947
1948 \begin{itemize}[label=\twarn]
1949 \item
1950 \emph{Please remember that this plan is an admissibility condition,
1951 unless the work programme topic explicitly states otherwise. In case
1952 your proposal is selected for funding, a more detailed `plan for
1953 dissemination and exploitation including communication activities'
1954 will need to be provided as a mandatory project deliverable within 6
1955 months after signature date. This plan shall be periodically updated
1956 in alignment with the project's progress.}
1957 \item
1958 \emph{\uline{Communication}}\footnote{For further guidance on
1959 communicating EU research and innovation for project participants,
1960 please refer to the
1961 \href{https://ec.europa.eu/info/funding-tenders/opportunities/docs/2021-2027/common/guidance/om_en.pdf}{Online
1962 Manual} on the Funding \& Tenders Portal} \emph{measures should
1963 promote the project throughout the full lifespan of the project. The
1964 aim is to inform and reach out to society and show the activities
1965 performed, and the use and the benefits the project will have for
1966 citizens. Activities must be strategically planned, with clear
1967 objectives, start at the outset and continue through the lifetime of
1968 the project. The description of the communication activities needs to
1969 state the main messages as well as the tools and channels that will be
1970 used to reach out to each of the chosen target groups.}
1971 \item
1972 \emph{All measures should be proportionate to the scale of the
1973 project, and should contain concrete actions to be implemented both
1974 during and after the end of the project, e.g.\ standardisation
1975 activities. Your plan should give due consideration to the possible
1976 follow-up of your project, once it is finished. In the justification,
1977 explain why each measure chosen is best suited to reach the target
1978 group addressed. Where relevant, and for innovation actions, in
1979 particular, describe the measures for a plausible path to
1980 commercialise the innovations.}
1981 \item
1982 \emph{If exploitation is expected primarily in non-associated third
1983 countries, justify by explaining how that exploitation is still in the
1984 Union's interest.}
1985 \item
1986 \emph{Describe possible feedback to policy measures generated by the
1987 project that will contribute to designing, monitoring, reviewing and
1988 rectifying (if necessary) existing policy and programmatic measures or
1989 shaping and supporting the implementation of new policy initiatives
1990 and decisions.}
1991 \end{itemize}
1992
1993 \item
1994 Outline your strategy for the management of intellectual property,
1995 foreseen protection measures, such as patents, design rights,
1996 copyright, trade secrets, etc., and how these would be used to support
1997 exploitation.
1998
1999 \begin{itemize}[label=\twarn]
2000 \item
2001 \emph{If your project is selected, you will need an appropriate
2002 consortium agreement to manage (amongst other things) the ownership
2003 and access to key knowledge (IPR, research data etc.). Where relevant,
2004 these will allow you, collectively and individually, to pursue market
2005 opportunities arising from the project.}
2006 \item
2007 \emph{If your project is selected, you must indicate the owner(s) of
2008 the results (results ownership list) in the final periodic report.}
2009 \end{itemize}
2010 \end{itemize}
2011
2012
2013 %</hi-measures>
2014 %<*hi-methodology>
2015 \begin{itemize}
2016 \item
2017 Describe and explain the overall methodology, including the concepts,
2018 models and assumptions that underpin your work. Explain how this will
2019 enable you to deliver your project's objectives. Refer to any
2020 important challenges you may have identified in the chosen methodology
2021 and how you intend to overcome them. \emph{[e.g.\ 10 pages]}
2022
2023 \begin{itemize}[label=\twarn]
2024 \item
2025 \emph{This section should be presented as a narrative. The detailed
2026 tasks and work packages are described below under `Implementation'.}
2027 \makeatletter
2028 \ifdim\@templateversion pt<4.0pt
2029 \item
2030 \emph{Where relevant, include how the project methodology complies
2031 with the `do no significant harm' principle as per Article 17 of
2032 \href{https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex:32020R0852}{Regulation
2033 (EU) No 2020/852} on the establishment of a framework to facilitate
2034 sustainable investment (i.e.\ the so-called \textquotesingle EU
2035 Taxonomy Regulation\textquotesingle). This means that the methodology
2036 is designed in a way it is not significantly harming any of the six
2037 environmental objectives of the EU Taxonomy Regulation.}
2038 \item
2039 \emph{If you plan to use, develop and\slash or deploy artificial
2040 intelligence (AI) based systems and\slash or techniques you must
2041 demonstrate their technical robustness. AI-based systems or techniques
2042 should be, or be developed to become:}
2043
2044 \begin{itemize}
2045 \item
2046 \emph{technically robust, accurate and reproducible, and able to
2047 deal with and inform about possible failures, inaccuracies and
2048 errors, proportionate to the assessed risk they pose}
2049 \item
2050 \emph{socially robust, in that they duly consider the context and
2051 environment in which they operate}
2052 \item
2053 \emph{reliable and function as intended, minimizing unintentional
2054 and unexpected harm, preventing unacceptable harm and safeguarding
2055 the physical and mental integrity of humans}
2056 \item
2057 \emph{able to provide a suitable explanation of their
2058 decision-making processes, whenever they can have a significant
2059 impact on people's lives.}
2060 \end{itemize}
2061 \fi
2062 \makeatother
2063 \end{itemize}
2064
2065 \item
2066 Describe any national or international research and innovation
2067 activities whose results will feed into the project, and how that link
2068 will be established; \emph{[e.g.\ 1 page]}
2069 \item
2070 Explain how expertise and methods from different disciplines will be
2071 brought together and integrated in pursuit of your objectives. If you
2072 consider that an inter-disciplinary approach is unnecessary in the
2073 context of the proposed work, please provide a justification.
2074 \emph{[e.g.\ 1/2 page]}
2075 \item
2076 For topics where the work programme indicates the need for the
2077 integration of social sciences and humanities, show the role of these
2078 disciplines in the project or provide a justification if you consider
2079 that these disciplines are not relevant to your proposed project.
2080 \emph{[e.g.\ 1/2 page]}
2081 \item
2082 Describe how the gender dimension (i.e.\ sex and\slash or gender analysis) is
2083 taken into account in the project's research and innovation content
2084 \emph{[e.g.\ 1 page].} If you do not consider such a gender
2085 dimension to be relevant in your project, please provide a
2086 justification.
2087
2088 \begin{itemize}[label=\twarn]
2089 \item
2090 \emph{Note: This section is mandatory except for topics which have
2091 been identified in the work programme as not requiring the integration
2092 of the gender dimension into R\&I content.}
2093 \item
2094 \emph{Remember that that this question relates to the \uline{content}
2095 of the planned research and innovation activities, and not to gender
2096 balance in the teams in charge of carrying out the project.}
2097 \item
2098 \emph{Sex and gender analysis refers to biological characteristics and
2099 social\slash cultural factors respectively. For guidance on methods of sex\slash
2100 gender analysis and the issues to be taken into account, please refer
2101 to}
2102 \url{https://ec.europa.eu/info/news/gendered-innovations-2-2020-nov-24_en}
2103 \end{itemize}
2104
2105 \item
2106 Describe how appropriate open science practices are implemented as an
2107 integral part of the proposed methodology. Show how the choice of
2108 practices and their implementation are adapted to the nature of your
2109 work, in a way that will increase the chances of the project
2110 delivering on its objectives \emph{[e.g.\ 1 page]}. If you believe
2111 that none of these practices are appropriate for your project, please
2112 provide a justification here.
2113
2114 \begin{itemize}[label=\twarn]
2115 \item
2116 \emph{Open science is an approach based on open cooperative work and
2117 systematic sharing of knowledge and tools as early and widely as
2118 possible in the process. Open science practices include early and open
2119 sharing of research (for example through preregistration, registered
2120 reports, pre-prints, or crowd-sourcing); research output management;
2121 measures to ensure reproducibility of research outputs; providing open
2122 access to research outputs (such as publications, data, software,
2123 models, algorithms, and workflows); participation in open peer-review;
2124 and involving all relevant knowledge actors including citizens, civil
2125 society and end users in the co-creation of R\&I agendas and contents
2126 (such as citizen science).}
2127 \item
2128 \emph{Please note that this question does not refer to outreach
2129 actions that may be planned as part of communication, dissemination
2130 and exploitation activities. These aspects should instead be described
2131 below under `Impact'.}
2132 \end{itemize}
2133
2134 \makeatletter
2135 \ifdim\@templateversion pt<4.0pt
2136 \item
2137 Research \textbf{data management and management of other research
2138 outputs:} Applicants generating\slash collecting data and\slash or other research
2139 outputs (except for publications) during the project must provide
2140 maximum 1 page on how the data\slash research outputs will be managed in
2141 line with the FAIR principles (Findable, Accessible, Interoperable,
2142 Reusable), addressing the following (the description should be
2143 specific to your project): \emph{[1 page]}
2144
2145 \begin{quote}
2146 \textbf{Types of data\slash research outputs} (e.g.\ experimental,
2147 observational, images, text, numerical) and their estimated size; if
2148 applicable, combination with, and provenance of, existing data.
2149
2150 \textbf{Findability of data\slash research outputs:} Types of persistent and
2151 unique identifiers (e.g.\ digital object identifiers) and trusted
2152 repositories that will be used.
2153
2154 \textbf{Accessibility of data\slash research outputs:} IPR considerations and
2155 timeline for open access (if open access not provided, explain why);
2156 provisions for access to restricted data for verification purposes.
2157
2158 \textbf{Interoperability of data\slash research outputs:} Standards, formats
2159 and vocabularies for data and metadata.
2160
2161 \textbf{Reusability of data\slash research outputs}: Licenses for data
2162 sharing and re-use (e.g.\ Creative Commons, Open Data
2163 Commons); availability of tools\slash software\slash models for data generation and
2164 validation\slash interpretation\slash re-use.
2165
2166 \textbf{Curation and storage\slash preservation costs}; person\slash team
2167 responsible for data management and quality assurance.
2168 \end{quote}
2169 \fi
2170 \makeatother
2171
2172 \begin{itemize}[label=\twarn]
2173 \item
2174 \emph{Proposals selected for funding under Horizon Europe will need to
2175 develop a detailed data management plan (DMP) for making their
2176 data\slash research outputs findable, accessible, interoperable and reusable
2177 (FAIR) as a deliverable by month 6 and revised towards the end of a
2178 project's lifetime.}
2179 \makeatletter
2180 \ifdim\@templateversion pt>3.4pt
2181 \emph{The DMP should describe how research outputs
2182 (especially research data) generated and\slash or collected during the
2183 project will be managed so as to ensure that they are findable,
2184 accessible, interoperable and reusable.}
2185 \fi
2186 \makeatother
2187 \item
2188 \emph{For guidance on open science practices and research data
2189 management, please refer to the relevant section of the
2190 \href{https://ec.europa.eu/info/funding-tenders/opportunities/docs/2021-2027/horizon/guidance/programme-guide_horizon_en.pdf}{HE
2191 Programme Guide} on the Funding \& Tenders Portal.}
2192 \end{itemize}
2193 \end{itemize}
2194 %</hi-methodology>
2195 %<*hi-milestones>
2196 \begin{tcolorbox}[standard jigsaw,opacityback=0]
2197 \textbf{KEY}
2198
2199 \textbf{Due date}
2200
2201 Measured in months from the project start date (month 1)
2202
2203 \textbf{Means of verification}
2204
2205 Show how you will confirm that the milestone has been attained. Refer to
2206 indicators if appropriate. For example: a laboratory prototype that is
2207 `up and running'; software released and validated by a user group; field
2208 survey complete and data quality validated.
2209 \end{tcolorbox}
2210 %</hi-milestones>
2211 %<*hi-objectives>
2212 \begin{itemize}
2213 \item
2214 Briefly describe the objectives of your proposed work. Why are they
2215 pertinent to the work programme topic? Are they measurable and
2216 verifiable? Are they realistically achievable?
2217 \item
2218 Describe how your project goes beyond the state-of-the-art, and the
2219 extent the proposed work is ambitious. Indicate any exceptional
2220 ground-breaking R\&I, novel concepts and approaches, new products,
2221 services or business and organisational models. Where relevant,
2222 illustrate the advance by referring to products and services already
2223 available on the market. Refer to any patent or publication search
2224 carried out.
2225 \item
2226 Describe where the proposed work is positioned in terms of R\&I
2227 maturity (i.e.\ where it is situated in the spectrum from `idea to
2228 application', or from `lab to market'). Where applicable, provide an
2229 indication of the Technology Readiness Level, if possible
2230 distinguishing the start and by the end of the project.
2231
2232 \begin{itemize}[label=\twarn]
2233 \item \emph{Please bear in mind that advances beyond the state of
2234 the art must be interpreted in the light of the positioning of
2235 the project. Expectations will not be the same for RIAs at
2236 lower TRL, compared with Innovation Actions at high TRLs. }
2237 \end{itemize}
2238 \end{itemize}
2239 %</hi-objectives>
2240 %<*hi-othercosts>
2241 Please complete the table below for each participant that would like to
2242 declare costs under other costs categories (e.g.\ internally invoiced
2243 goods and services), irrespective of the percentage of personnel costs.
2244 %</hi-othercosts>
2245 %<*hi-participant-numbering>
2246 Please use the same participant numbering and name as that used in the
2247 administrative proposal forms.
2248 %</hi-participant-numbering>
2249 %<*hi-participants>
2250 \twarn The consortium members are listed in part~A of the proposal
2251 (application forms). A summary list should also be provided in the
2252 table below.
2253 %</hi-participants>
2254 %<*hi-pathways>
2255 \begin{itemize}
2256 \item
2257 \begin{quote}
2258 Provide a \textbf{narrative} explaining how the project's results
2259 are expected to make a difference in terms of impact, beyond the
2260 immediate scope and duration of the project. The narrative should
2261 include the components below, tailored to your project.
2262 \end{quote}
2263
2264 \begin{enumerate}
2265 \def\labelenumi{(\alph{enumi})}
2266 \item
2267 Describe the unique contribution your project results would make
2268 towards (1)~the \textbf{outcomes} specified in this topic, and (2)~the
2269 \textbf{wider impacts}, in the longer term, specified in the
2270 respective destinations in the work programme.
2271
2272 \begin{itemize}[label=\twarn]
2273 \item
2274 \emph{Be specific, referring to the effects of your project, and not
2275 R\&I in general in this field.}
2276 \item
2277 \emph{State the target groups that would benefit. Even if target
2278 groups are mentioned in general terms in the work programme, you
2279 should be specific here, breaking target groups into particular
2280 interest groups or segments of society relevant to this project.}
2281 \item
2282 \emph{The outcomes and impacts of your project may:}
2283
2284 \begin{itemize}
2285 \item
2286 \emph{Scientific, e.g.\ contributing to specific scientific advances,
2287 across and within disciplines, creating new knowledge, reinforcing
2288 scientific equipment and instruments, computing systems (i.e.
2289 research infrastructures);}
2290 \item
2291 \emph{Economic\slash technological, e.g.\ bringing new products, services,
2292 business processes to the market, increasing efficiency, decreasing
2293 costs, increasing profits, contributing to standards' setting, etc.}
2294 \item
2295 \emph{Societal, e.g.\ decreasing CO\textsubscript{2} emissions,
2296 decreasing avoidable mortality, improving policies and decision
2297 making, raising consumer awareness.}
2298 \end{itemize}
2299
2300 \emph{Only include such outcomes and impacts where your project would
2301 make a significant and direct contribution. Avoid describing very
2302 tenuous links to wider impacts. However, include any potential
2303 negative environmental outcome or impact of the project including when
2304 expected results are brought at scale (such as at commercial level).
2305 Where relevant, explain how the potential harm can be managed.}
2306 \end{itemize}
2307
2308 \item
2309 Give an indication of the scale and significance of the project's
2310 contribution to the expected outcomes and impacts, should the project
2311 be successful. Provide quantified estimates where possible and
2312 meaningful.
2313
2314 \begin{itemize}[label=\twarn]
2315 \item
2316 `\emph{\uline{Scale'} refers to how widespread the outcomes and
2317 impacts are likely to be. For example, in terms of the size of the
2318 target group, or the proportion of that group, that should benefit
2319 over time; \uline{`Significance'} refers to the importance, or value,
2320 of those benefits. For example, number of additional healthy life
2321 years; efficiency savings in energy supply.}
2322
2323 \item
2324 \emph{Explain your baselines, benchmarks and assumptions used for
2325 those estimates. Wherever possible, quantify your estimation of the
2326 effects that you expect from your project. Explain assumptions that
2327 you make, referring for example to any relevant studies or statistics.
2328 Where appropriate, try to use only one methodology for calculating
2329 your estimates: not different methodologies for each partner, region
2330 or country (the extrapolation should preferably be prepared by one
2331 partner).}
2332
2333 \item
2334 \emph{Your estimate must relate to this project only~- the effect of
2335 other initiatives should not be taken into account.}
2336 \end{itemize}
2337
2338 \item
2339 Describe any requirements and potential barriers~- arising from
2340 factors beyond the scope and duration of the project~- that may
2341 determine whether the desired outcomes and impacts are achieved. These
2342 may include, for example, other R\&I work within and beyond Horizon
2343 Europe; regulatory environment; targeted markets; user behaviour.
2344 Indicate if these factors might evolve over time. Describe any
2345 mitigating measures you propose, within or beyond your project, that
2346 could be needed should your assumptions prove to be wrong, or to
2347 address identified barriers.
2348
2349 \begin{itemize}[label=\twarn]
2350 \item
2351 \emph{Note that this does not include the critical risks inherent to
2352 the management of the project itself , which should be described below
2353 under `Implementation'.}
2354 \end{itemize}
2355 \end{enumerate}
2356 \end{itemize}
2357 %</hi-pathways>
2358 %<*hi-purchasecosts>
2359 Please complete the table below for each participant if the purchase
2360 costs (i.e.\ the sum of the costs for 'travel and subsistence',
2361 `equipment', and `other goods, works and services') exceeds 15\% of the
2362 personnel costs for that participant (according to the budget table in
2363 proposal part~A). The record must list cost items in order of costs and
2364 starting with the largest cost item, up to the level that the remaining
2365 costs are below 15\% of personnel costs.
2366 %</hi-purchasecosts>
2367 %<*hi-quality>
2368 \begin{tcolorbox}[standard jigsaw,opacityback=0]
2369 \emph{\textbf{Quality and efficiency of the implementation -- aspects to
2370 be taken into account}}
2371
2372 \begin{itemize}
2373 \item
2374 \emph{Quality and effectiveness of the work plan, assessment of risks,
2375 and appropriateness of the effort assigned to work packages, and the
2376 resources overall}
2377 \item
2378 \emph{Capacity and role of each participant, and extent to which the
2379 consortium as a whole brings together the necessary expertise.}
2380 \end{itemize}
2381 \end{tcolorbox}
2382 %</hi-quality>
2383 %<*hi-staffeffort>
2384 \emph{Please indicate the number of person\slash months over the whole
2385 duration of the planned work, for each work package, for each
2386 participant. Identify the work-package leader for each WP by showing the
2387 relevant person-month figure in bold.}
2388 %</hi-staffeffort>
2389 %<*hi-subcontractingcosts>
2390 For each participant describe and justify the tasks to be subcontracted
2391 (please note that core tasks of the project should not be
2392 sub-contracted).
2393 %</hi-subcontractingcosts>
2394 %<*hi-summary>
2395 Provide a summary of this section by presenting in the canvas below the
2396 key elements of your project impact pathway and of the measures to
2397 maximise its impact.
2398 %</hi-summary>
2399 %<*hi-tables>
2400 \twarn \emph{Use plain text for the tables in section~\ref{sec:workplan}. If the proposal is
2401 invited to start Grant Agreement preparation, these tables will have to
2402 be encoded in the grant management IT tool, where no graphics or special
2403 formats are supported.}
2404 %</hi-tables>
2405 %<*hi-workplan>
2406 Please provide the following:
2407
2408 \begin{itemize}
2409 \item
2410
2411 brief presentation of the overall structure of the work plan;
2412 \item
2413
2414 timing of the different work packages and their components (Gantt
2415 chart or similar);
2416 \item
2417
2418 graphical presentation of the components showing how they inter-relate
2419 (Pert chart or similar).
2420 \item
2421
2422 detailed work description, i.e.:
2423
2424 \begin{itemize}
2425 \item
2426
2427 a list of work packages (table~3.1a);
2428 \item
2429
2430 a description of each work package (table~3.1b);
2431 \item
2432
2433 a list of deliverables (table~3.1c);
2434 \begin{itemize}[label=\twarn]
2435 \item
2436 \emph{Give full details. Base your account on the logical structure of
2437 the project and the stages in which it is to be carried out.}
2438 \makeatletter
2439 \ifdim\@templateversion pt<3.4pt
2440 \emph{The number of work packages should be proportionate to the scale
2441 and complexity of the project.}
2442 \item
2443 \emph{You should give enough detail in each work package to justify
2444 the proposed resources to be allocated and also quantified information
2445 so that progress can be monitored, including by the Commission}
2446 \else
2447 \emph{Each work package should be a substantial part of the work
2448 plan, and the number of work packages should be proportionate to
2449 the scale and complexity of the project.}
2450 \item \emph{Structure each work package by breaking it down into
2451 tasks. If tasks are not appropriate, work packages can be
2452 organised according to other criteria (e.g., according to the type
2453 of work or thematically). For each task or element of the work
2454 package, describe all activities to be carried out and quantify
2455 them (e.g., number of protocols, tests, measurements,
2456 combinations, study subjects, conferences, publications,
2457 etc.). Provide enough detail to clarify who will do this work and
2458 why it is needed for the project, (e.g., the level of
2459 qualification and number of person-months for personnel, as well
2460 as the requested equipment, consumables, meetings, etc.), to
2461 justify the proposed resources and so that progress can be
2462 monitored, including by the Commission.}
2463 \fi
2464 \makeatother
2465 \item
2466 \emph{Resources assigned to work packages should be in line with their
2467 objectives and deliverables. You are advised to include a distinct
2468 work package on `project management', and to give due visibility in
2469 the work plan to `data management' `dissemination and exploitation'
2470 and `communication activities', either with distinct tasks or distinct
2471 work packages.}
2472 \item
2473 \emph{You will be required to update the `plan for the dissemination
2474 and exploitation of results including communication activities', and a
2475 `data management plan', (this does not apply to topics where a plan
2476 was not required.) This should include a record of activities related
2477 to dissemination and exploitation that have been undertaken and those
2478 still planned.}
2479 \item
2480 \emph{Please make sure the information in this section matches the
2481 costs as stated in the budget table in section~\ref{sec:quality} of the application
2482 forms, and the number of person months, shown in the detailed work
2483 package descriptions.}
2484 \end{itemize}
2485 \end{itemize}
2486
2487 \item
2488 a list of milestones (table~3.1d);
2489
2490 \item
2491 a list of critical risks, relating to project implementation, that the
2492 stated project\textquotesingle s objectives may not be achieved.
2493 Detail any risk mitigation measures. You will be able to update the
2494 list of critical risks and mitigation measures as the project
2495 progresses (table~3.1e);
2496
2497 \item
2498 a table showing number of person months required (table~3.1f);
2499
2500 \item
2501 a table showing description and justification of subcontracting costs
2502 for each participant (table~3.1g);
2503
2504 \item
2505 a table showing justifications for `purchase costs' (table~3.1h) for
2506 participants where those costs exceed 15\% of the personnel costs
2507 (according to the budget table in proposal part~A);
2508
2509 \item
2510 if applicable, a table showing justifications for `other costs
2511 categories' (table~3.1i);
2512
2513 \item
2514 if applicable, a table showing in-kind contributions from third
2515 parties (table~3.1j)
2516 \end{itemize}
2517 %</hi-workplan>
2518 %<*hi-wp-description>
2519 \makeatletter
2520 \ifdim\@templateversion pt<3.4pt
2521 (where appropriate, broken down into tasks), lead partner and role of
2522 participants. Deliverables linked to each WP are listed in table~3.1c
2523 (no need to repeat the information here).
2524 \else
2525 (where appropriate, broken down into tasks), lead partner and role of participants. For each task, quantify the amount of work. Provide enough detail to justify the resources requested and clarify why the work is needed and who will do it. Deliverables linked to each WP are listed in table~3.1c (no need to repeat the information here).
2526 \fi
2527 \makeatother
2528 %</hi-wp-description>
2529 %<*hi-wp-objectives>
2530 \twarn \emph{Participants involved in each WP and their efforts are
2531 shown in table~3.1f. Lead participant and starting and end date of
2532 each WP are shown in table~3.1a.)}
2533 %</hi-wp-objectives>
2534 %<*heria-proposal>
2535 %% Copyright 2023, 2024 Tristan Miller
2536 %%
2537 %% This work may be distributed and/or modified under the
2538 %% conditions of the LaTeX Project Public License, either version 1.3c
2539 %% of this license or (at your option) any later version.
2540 %% The latest version of this license is in
2541 %% https://www.latex-project.org/lppl.txt
2542 %% and version 1.3c or later is part of all distributions of LaTeX
2543 %% version 2008 or later.
2544 %%
2545 \documentclass[showinstructions]{heria}
2546
2547 \templateversion{4.0}
2548
2549 \title{Skeleton Horizon Europe Proposal}
2550 \callname{insert call name}
2551 \callidentifier{HORIZON-XX0-0000-XXXXX-00-XXXXX}
2552 \calltopic{HORIZON-XX0-0000-XXXXX-00-00}
2553
2554 \begin{document}
2555 \maketitle
2556
2557 \heinstructions{participants}
2558
2559 \noindent\opentag{APP-FORM-HERIAIA}%
2560 \section*{List of participants}[][][1 page]\label{sec:listofparticipants}
2561
2562 \participant
2563 {University of Upper Freedonia} % Participant organisation name
2564 {UUF} % Participant short name
2565 {AT} % Country
2566
2567 \participant
2568 {Molvania State University} % Participant organisation name
2569 {MSU} % Participant short name
2570 {DE} % Country
2571
2572 \participant
2573 {Institute for Underwater Basket Weaving} % Participant organisation name
2574 {IUBW} % Participant short name
2575 {UK} % Country
2576
2577 \makeparticipantstable
2578
2579 \heinstructions{participant-numbering}
2580
2581 \section{Excellence}[REL-EVA-RE]\label{sec:excellence}
2582
2583 \heinstructions{excellence}
2584
2585 \subsection{Objectives and ambition}[PRJ-OBJ-PO][][4 pages]\label{sec:objectives}
2586
2587 \heinstructions{objectives}
2588
2589 \subsection{Methodology}[CON-MET-CM,COM-PLE-CP][PRJ-OBJ-PO][14 pages]\label{sec:methodology}
2590
2591 \heinstructions{methodology}
2592
2593 \subsubsection{Overall methodology}[][][10 pages]\label{sec:overallmethodology}
2594
2595 \subsubsection{Connections to other research activities}[][][1 page]\label{sec:connections}
2596
2597 \subsubsection{Interdisciplinarity}[][][1/2 page]\label{sec:interdisciplinarity}
2598
2599 \subsubsection{Gender dimension}[][][1/2 page]\label{sec:gender}
2600
2601 \subsubsection{Open science}[][][1 page]\label{sec:openscience}
2602
2603 \makeatletter
2604 \ifdim\@templateversion pt<4.0pt
2605 \subsubsection{Research data management}[][][1 page]\label{sec:rdm}
2606 \fi
2607 \makeatother
2608
2609 \section{Impact}[IMP-ACT-IA][CON-MET-CM,COM-PLE-CP,REL-EVA-RE]\label{sec:impact}
2610
2611 \heinstructions{impact}
2612
2613 \subsection{Project's pathways towards impact}[][][4 pages]\label{sec:pathways}
2614
2615 \heinstructions{pathways}
2616
2617 \subsection{Measures to maximise impact: Dissemination, exploitation and communication}[COM-DIS-VIS-CDV][][5 pages, including section~\ref{sec:summary}]\label{sec:measures}
2618
2619 \heinstructions{measures}
2620
2621 \subsection{Summary}\label{sec:summary}
2622
2623 \heinstructions{summary}
2624
2625 \closetag{COM-DIS-VIS-CDV}
2626
2627 \begin{SidewaysFigure}
2628 \begin{summarycanvas}%
2629 \begin{summarybox}{SPECIFIC NEEDS}
2630 \end{summarybox}%
2631 \begin{summarybox}{EXPECTED RESULTS}
2632 \end{summarybox}%
2633 \begin{summarybox}{D \& E \& C MEASURES}
2634 \end{summarybox}%
2635 \end{summarycanvas}%
2636 \begin{summarycanvas}%
2637 \begin{summarybox}{TARGET GROUPS}
2638 \end{summarybox}%
2639 \begin{summarybox}{OUTCOMES}
2640 \end{summarybox}%
2641 \begin{summarybox}{IMPACTS}
2642 \end{summarybox}%
2643 \end{summarycanvas}%
2644 \caption{Impact summary tableau}\label{fig:impact}
2645 \end{SidewaysFigure}
2646
2647 \section{Quality and efficiency of the implementation}[QUA-LIT-QL,WRK-PLA-WP][IMP-ACT-IA]\label{sec:quality}
2648
2649 \heinstructions{quality}
2650
2651 \subsection{Work plan and resources}[][][14 pages (19 pages for topics using lump sum funding)~-- including tables]\label{sec:workplan}
2652
2653 \heinstructions{workplan}
2654
2655 \subsubsection*{Table 3.1a: List of work packages}
2656
2657 \heinstructions{tables}
2658
2659 \makeworkpackagestable
2660
2661 \subsubsection*{Table 3.1b: Work package description}
2662
2663 \workpackage
2664 {ra} % unique ID (used only for cross-referencing deliverables, etc. in LaTeX)
2665 {Requirements analysis} % work package title
2666 {UUF}% Lead participant (using short name)
2667 {1}% Start month
2668 {6}% End month
2669
2670 \heinstructions{wp-objectives}
2671 \begin{objectives}
2672 \item First objective
2673 \item Second objective
2674 \item \dots
2675 \end{objectives}
2676
2677 \begin{descriptionofwork}
2678 \heinstructions{wp-description}
2679 \task
2680 {Literature survey} % task name
2681 {UUF} % short name of lead participant
2682 {MSU} % other participants (or "all participants", etc.)
2683 {1--6} % month(s)
2684 In this task, we will read a lot of books, and\dots
2685 \end{descriptionofwork}
2686
2687 \deliverable
2688 {dmp} % deliverable name
2689 {Data management plan} % short description
2690 {MSU} % short name of lead participant
2691 {DMP}% type; see Table 3.1c instructions for valid values
2692 {PU}% dissemination level; see Table 3.1c instructions for valid values
2693 {6}% delivery date (in months from beginning of project)
2694
2695 \workpackage%
2696 {integration}% Unique ID (used only for cross-referencing deliverables, etc. in LaTeX)
2697 {System integration}% Title
2698 {UUF}% Lead partner (using short name ID)
2699 {1}% Start month
2700 {20}% End month
2701
2702 \heinstructions{wp-objectives}
2703 \begin{objectives}
2704 \item First objective
2705 \item Second objective
2706 \item \dots
2707 \end{objectives}
2708
2709 \begin{descriptionofwork}
2710 \heinstructions{wp-description}
2711 \task
2712 {Develop prototype} % task name
2713 {UUF} % short name of lead participant
2714 {MSU} % other participants (or "all participants", etc.)
2715 {1--10} % month(s)
2716 In this task, we will do lots of coding, and\dots
2717 \end{descriptionofwork}
2718
2719 \deliverable
2720 {demo} % deliverable name
2721 {Working demo system} % short description
2722 {IUBW} % short name of lead participant
2723 {DEM}% type; see Table 3.1c instructions for valid values
2724 {SEN}% dissemination level; see Table 3.1c instructions for valid values
2725 {10}% delivery date (in months from beginning of project)
2726
2727 \workpackage%
2728 {dissemination}% Unique ID (used only for cross-referencing deliverables, etc. in LaTeX)
2729 {Dissemination and exploitation}% Title
2730 {UUF}% Lead partner (using short name ID)
2731 {7}% Start month
2732 {20}% End month
2733
2734 \heinstructions{wp-objectives}
2735 \begin{objectives}
2736 \item First objective
2737 \item Second objective
2738 \item \dots
2739 \end{objectives}
2740
2741 \begin{descriptionofwork}
2742 \heinstructions{wp-description}
2743 \task
2744 {Organise public workshop} % task name
2745 {MSU} % short name of lead participant
2746 {all participants} % other participants (or "all participants", etc.)
2747 {7--10} % month(s)
2748 In this task, we will unite the greatest minds\dots
2749 \end{descriptionofwork}
2750
2751 \deliverable
2752 {proceedings} % deliverable name
2753 {Workshop proceedings} % short description
2754 {MSU} % short name of lead participant
2755 {R}% type; see Table 3.1c instructions for valid values
2756 {PU}% dissemination level; see Table 3.1c instructions for valid values
2757 {11}% delivery date (in months from beginning of project)
2758
2759 \subsubsection*{Table 3.1c: List of deliverables}
2760
2761 \heinstructions{deliverables}
2762
2763 \makedeliverablestable
2764
2765 \heinstructions{deliverables-key}
2766
2767 \subsubsection*{Table 3.1d: List of milestones}
2768
2769 \milestone
2770 {Define use cases} % milestone name
2771 {WP1} % related work package(s)
2772 {12} % month due
2773 {expert review} % means of verification
2774
2775 \milestone
2776 {Minimum viable product (MVP)} % milestone name
2777 {WP2} % related work package(s)
2778 {20} % month due
2779 {expert review} % means of verification
2780
2781 \heinstructions{milestones}
2782 \makemilestonestable
2783
2784 \subsubsection*{Table 3.1e: Critical risks for implementation}[RSK-MGT-RM]
2785
2786 \criticalrisk
2787 {Datasets are not available} % description of risk
2788 {Low} % Likelihood
2789 {High} % Severity
2790 {WP1, WP2} % Work package(s) involved
2791 {We'll find new ones} % Proposed risk-mitigation measures
2792
2793 \heinstructions{criticalrisks}
2794 \makecriticalriskstable
2795
2796 \subsubsection*{Table 3.1f: Summary of staff effort}[][RSK-MGT-RM]
2797
2798 \staffeffort
2799 {UUF} % short name of participant
2800 {ra} % name of work package
2801 {23} % number of person-months
2802 \staffeffort{UUF}{integration}{6}
2803 \staffeffort{UUF}{dissemination}{11}
2804 \staffeffort{MSU}{ra}{18}
2805 \staffeffort{MSU}{integration}{17}
2806 \staffeffort{MSU}{dissemination}{1}
2807 \staffeffort{IUBW}{ra}{21}
2808 \staffeffort{IUBW}{integration}{14}
2809 \staffeffort{IUBW}{dissemination}{5}
2810
2811 \heinstructions{staffeffort}
2812 \makestaffefforttable
2813
2814 \subsubsection*{Table 3.1g: `Subcontracting costs' items}
2815
2816 \heinstructions{subcontractingcosts}
2817
2818 \subcontractingcost
2819 {UUF} % short name of participant
2820 {25000} % cost in euros
2821 {Design project website} % description of tasks and justification
2822
2823 \makesubcontractingcoststable
2824
2825 \subsubsection*{Table 3.1h: `Purchase costs' items (travel and subsistence, equipment and other goods, works and services)}
2826
2827 \heinstructions{purchasecosts}
2828
2829 \purchasecost
2830 {IUBW} % short name of participant
2831 {6125} % travel cost in euros
2832 {Attendance at two conferences} % justification
2833 {2120} % equipment cost in euros
2834 {Computing cluster} % justification
2835 {4775} % other costs in euros
2836 {Crowdsourcing study} % justification
2837 {1000} % remaining costs
2838
2839 \makepurchasecoststable
2840
2841 \subsubsection*{Table 3.1i: `Other costs categories' items (e.g., internally invoiced goods and services)}
2842
2843 \heinstructions{othercosts}
2844
2845 \othercost
2846 {UUF} % short name of participant
2847 {500} % cost in euros
2848 {Cookies for bribing reviewers} % justification
2849 \othercost
2850 {MSU} % short name of participant
2851 {15000} % cost in euros
2852 {Legal fees for defending bribery charges} % justification
2853
2854 \makeothercoststable
2855
2856 \subsubsection*{Table 3.1j: `In-kind contributions' provided by third parties}
2857
2858 \inkindcontribution
2859 {UUF} % short name of participant
2860 {Freedonian Ministry of Education} % third party name
2861 {Travel and subsistence} % category (see template instructions for list)
2862 {300} % cost in euros
2863 {Use of minister's private jet} % justification
2864
2865 \heinstructions{inkind}
2866 \makeinkindcontributionstable
2867
2868 \subsection{Capacity of participants and consortium as a whole}[CON-SOR-CS,PRJ-MGT-PM][][3 pages]\label{sec:capacity}
2869
2870 \heinstructions{capacity}
2871
2872 \closetag{CON-SOR-CS,PRJ-MGT-PM}
2873
2874 \closetag{QUA-LIT-QL,WRK-PLA-WP}
2875
2876 \heinstructions{annexes}
2877 \end{document}
2878 %</heria-proposal>
2879 % \fi
2880 % \Finale