| 1 |
% \iffalse |
| 2 |
% |
| 3 |
% This is file `hc.dtx'. |
| 4 |
% |
| 5 |
%% Copyright (C) 1998--2000 Christian Siefkes <[email protected]> |
| 6 |
%% |
| 7 |
%% Updates are available via http://tal.cs.tu-berlin.de/error/TeX/ |
| 8 |
%% |
| 9 |
%% This file is part of the HC Bundle for LaTeX2e. |
| 10 |
%% ----------------------------------------------- |
| 11 |
%% |
| 12 |
%% This file is free software; you can redistribute it and/or modify |
| 13 |
%% it under the terms of the GNU Library General Public License as |
| 14 |
%% published by the Free Software Foundation; either version 2 of the |
| 15 |
%% License, or (at your option) any later version. |
| 16 |
%% |
| 17 |
%% This document is distributed in the hope that it will be useful, but |
| 18 |
%% WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 |
%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 20 |
%% General Public License for more details. |
| 21 |
%% |
| 22 |
%% You should have received a copy of the GNU General Public License |
| 23 |
%% along with this program; see the file COPYING. If not, write to |
| 24 |
%% the Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| 25 |
%% Boston, MA 02111-1307, USA. |
| 26 |
%% |
| 27 |
% \CharacterTable |
| 28 |
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 29 |
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 30 |
% Digits \0\1\2\3\4\5\6\7\8\9 |
| 31 |
% Exclamation \! Double quote \" Hash (number) \# |
| 32 |
% Dollar \$ Percent \% Ampersand \& |
| 33 |
% Acute accent \' Left paren \( Right paren \) |
| 34 |
% Asterisk \* Plus \+ Comma \, |
| 35 |
% Minus \- Point \. Solidus \/ |
| 36 |
% Colon \: Semicolon \; Less than \< |
| 37 |
% Equals \= Greater than \> Question mark \? |
| 38 |
% Commercial at \@ Left bracket \[ Backslash \\ |
| 39 |
% Right bracket \] Circumflex \^ Underscore \_ |
| 40 |
% Grave accent \` Left brace \{ Vertical bar \| |
| 41 |
% Right brace \} Tilde \~} |
| 42 |
% |
| 43 |
%<class>\NeedsTeXFormat{LaTeX2e}[1995/12/01] |
| 44 |
%<*dtx> |
| 45 |
\ProvidesFile{hc.dtx}% |
| 46 |
%</dtx> |
| 47 |
%<german>\ProvidesFile{german.hld}% |
| 48 |
%<hcart>\ProvidesClass{hcart}% |
| 49 |
%<hcletter>\ProvidesClass{hcletter}% |
| 50 |
%<hcreport>\ProvidesClass{hcreport}% |
| 51 |
%<hcslides>\ProvidesClass{hcslides}% |
| 52 |
% \fi |
| 53 |
% \ProvidesFile{hc.dtx}% |
| 54 |
[2000/03/23 v1.07 LaTeX2e HC Bundle] |
| 55 |
% \iffalse |
| 56 |
% |
| 57 |
%<*driver> |
| 58 |
\documentclass[paper]{hcart} |
| 59 |
\usepackage{doc} |
| 60 |
\begin{document} |
| 61 |
\DocInput{hc.dtx} |
| 62 |
\end{document} |
| 63 |
%</driver> |
| 64 |
% \fi |
| 65 |
% |
| 66 |
% \newcommand{\cs}[1]{\texttt{\backslash #1}} |
| 67 |
% \changes{v0.9}{1999/09/09}{First public prerelease} |
| 68 |
% \changes{v1.0}{1999/11/01}{First official public version} |
| 69 |
% \changes{v1.01}{1999/11/05}{better PDF support, |
| 70 |
% \cs{keywords} and \cs{hyperinfo} commands added} |
| 71 |
% \changes{v1.02}{1999/11/28}{author's email \& homepage made |
| 72 |
% hyperlinks, \cs{phyp} and \cs{arrow} commands added} |
| 73 |
% \changes{v1.02a}{1999/12/23}{bugs fixed (load \texttt{babel} after |
| 74 |
% \texttt{natbib} package; correct formatting of \cs{tit(sub)info)}} |
| 75 |
% \changes{v1.02b}{1999/12/26}{\cs{bibfirst} command removed} |
| 76 |
% \changes{v1.02c}{2000/01/02}{\cs{addrdiv} command added} |
| 77 |
% \changes{v1.02d}{2000/01/04}{\cs{enge} command added, |
| 78 |
% \cs{bibmov} command modified} |
| 79 |
% \changes{v1.02e}{2000/01/05}{\cs{etal} command modified} |
| 80 |
% \changes{v1.02f}{2000/01/30}{bug fixed (\texttt{german} option)} |
| 81 |
% \changes{v1.03}{2000/01/31}{\cs{cfcite} command added} |
| 82 |
% \changes{v1.04}{2000/02/23}{\texttt{xspace} package support added} |
| 83 |
% \changes{v1.04a}{2000/02/24}{\texttt{mathpple} package support added} |
| 84 |
% \changes{v1.04b}{2000/02/29}{output of \cs{noyear} and \cs{noplace} |
| 85 |
% commands changed} |
| 86 |
% \changes{v1.05}{2000/03/04}{\texttt{dialog} environment and \cs{newspeaker} |
| 87 |
% command added} |
| 88 |
% \changes{v1.06}{2000/03/10}{\texttt{fnbib} option and \cs{f} command added} |
| 89 |
% \changes{v1.06a}{2000/03/11}{bug fixed (\texttt{fnbib} option)} |
| 90 |
% \changes{v1.06b}{2000/03/13}{implementation of (\texttt{bib} option changed)} |
| 91 |
% \changes{v1.06c}{2000/03/14}{\cs{ps@headings} macro changed)} |
| 92 |
% \changes{v1.07}{2000/03/23}{\cs{see} macro added)} |
| 93 |
% \GetFileInfo{hc.dtx} |
| 94 |
% |
| 95 |
% \tit[\filedate]{The HC Bundle for \LaTeXe\\\fileversion} |
| 96 |
% |
| 97 |
% \MakeShortVerb{\|} |
| 98 |
% \newcommand{\descOpt}[1]{\marginbox{#1}} |
| 99 |
% \newcommand{\descCom}[1]{\marginbox{\tt\textbackslash #1}} |
| 100 |
% \newcommand{\descEnv}[2][] |
| 101 |
% {\marginbox{\texttt{\textbackslash begin{\tt\string{}#2{\tt\string}}}#1}} |
| 102 |
% \newcommand{\comdiv}{\\ \tt\textbackslash} |
| 103 |
% \newcommand{\m}[1]{\mbox{\it #1\/}} |
| 104 |
% \renewcommand{\arg}[1]{{\tt\string{}\m{#1}{\tt\string}}} |
| 105 |
% \newcommand{\oarg}[1]{{\tt[}\m{#1}{\tt]}} |
| 106 |
% \newcommand{\rarg}[1]{<\m{#1}>} |
| 107 |
% |
| 108 |
% \section{Introduction} |
| 109 |
% The HC Bundle for \LaTeXe\ provides the following four classes as |
| 110 |
% replacement for the \LaTeX\ default classes: |
| 111 |
% \begin{flexlist}{hcreport.cls} |
| 112 |
% \item[hcart.cls] substitute for the |article| class,\\ |
| 113 |
% based upon the |scrartcl| class from the KoMa-Script bundle; |
| 114 |
% \item[hcreport.cls] substitute for the |report| class,\\ |
| 115 |
% based upon the |scrreprt| class from the KoMa-Script bundle; |
| 116 |
% \item[hcletter.cls] substitute for the |letter| class,\\ |
| 117 |
% based upon the |scrlettr| class from the KoMa-Script bundle; |
| 118 |
% \item[hcslides.cls] substitute for the |slides| class,\\ |
| 119 |
% based upon the |seminar| class. |
| 120 |
% \end{flexlist} |
| 121 |
% \begin{macrocode} |
| 122 |
%<*hcart> |
| 123 |
\newcommand{\thisclass}{hcart} |
| 124 |
\newcommand{\superclass}{scrartcl} |
| 125 |
%</hcart> |
| 126 |
%<*hcletter> |
| 127 |
\newcommand{\thisclass}{hcletter} |
| 128 |
\newcommand{\superclass}{scrlettr} |
| 129 |
%</hcletter> |
| 130 |
%<*hcreport> |
| 131 |
\newcommand{\thisclass}{hcreport} |
| 132 |
\newcommand{\superclass}{scrreprt} |
| 133 |
%</hcreport> |
| 134 |
%<*hcslides> |
| 135 |
\newcommand{\thisclass}{hcslides} |
| 136 |
\newcommand{\superclass}{seminar} |
| 137 |
%</hcslides> |
| 138 |
% \end{macrocode} |
| 139 |
% \section{Options} |
| 140 |
% \subsection{General Options} |
| 141 |
% \descOpt{german\\english} |
| 142 |
% Loads a language. Default is English. At the moment no other languages are |
| 143 |
% supported. Requires the |babel| package. |
| 144 |
% \begin{macrocode} |
| 145 |
%<*class> |
| 146 |
\newif\if@german |
| 147 |
\@germanfalse |
| 148 |
\newif\if@deflang |
| 149 |
\@deflangtrue |
| 150 |
\DeclareOption{german}{\@deflangfalse\@germantrue |
| 151 |
\PassOptionsToPackage{ngerman}{babel} |
| 152 |
\PassOptionsToPackage{german}{fancyref} |
| 153 |
\AtEndOfClass{\input{german.hld}}} |
| 154 |
\DeclareOption{english}{\@deflangfalse |
| 155 |
\PassOptionsToPackage{\CurrentOption}{babel}} |
| 156 |
% \end{macrocode} |
| 157 |
% \descOpt{a4paper\\letterpaper} |
| 158 |
% Use the DIN~A4 (default) or the letter paper format? At the moment no other |
| 159 |
% paper formats are supported. |
| 160 |
% \begin{macrocode} |
| 161 |
\newif\if@defpaper |
| 162 |
\@defpapertrue |
| 163 |
\DeclareOption{a4paper}{ |
| 164 |
%<hcart|hcletter|hcreport>\PassOptionsToClass{\CurrentOption}{\superclass} |
| 165 |
%<hcslides>\PassOptionsToClass{a4}{\superclass} |
| 166 |
\PassOptionsToPackage{\CurrentOption}{hyperref} |
| 167 |
\@defpaperfalse} |
| 168 |
\DeclareOption{letterpaper}{ |
| 169 |
%<hcart|hcletter|hcreport>\PassOptionsToClass{\CurrentOption}{\superclass} |
| 170 |
\PassOptionsToPackage{\CurrentOption}{hyperref} |
| 171 |
\@defpaperfalse} |
| 172 |
% \end{macrocode} |
| 173 |
% \descOpt{palatino\\nopalatino} |
| 174 |
% Use the Palatino or the Standard \TeX\ font? Palatino is default (requires |
| 175 |
% the |palatino| and the |mathpple| packages). |
| 176 |
% \begin{macrocode} |
| 177 |
\newif\if@palatino |
| 178 |
\@palatinotrue |
| 179 |
\DeclareOption{palatino}{\@palatinotrue} |
| 180 |
\DeclareOption{nopalatino}{\@palatinofalse} |
| 181 |
% \end{macrocode} |
| 182 |
% \descOpt{ding} |
| 183 |
% Provide some fancy lists and symbols using the Dingbat symbols (requires |
| 184 |
% the |pifont| style of the |psnfss| package)? |
| 185 |
% \begin{macrocode} |
| 186 |
\newif\if@ding |
| 187 |
\@dingfalse |
| 188 |
\DeclareOption{ding}{\@dingtrue} |
| 189 |
% \end{macrocode} |
| 190 |
% \descOpt{euro\\noeuro} |
| 191 |
% Provide the Euro symbol \E\ (default, requires the |eurofont| package)? |
| 192 |
% \begin{macrocode} |
| 193 |
\newif\if@euro |
| 194 |
\@eurotrue |
| 195 |
\DeclareOption{euro}{\@eurotrue} |
| 196 |
\DeclareOption{noeuro}{\@eurofalse} |
| 197 |
% \end{macrocode} |
| 198 |
% \descOpt{fancyref\\nofancyref} |
| 199 |
% Provide fancy reference commands (default, requires the |fancyref| and the |
| 200 |
% |varioref| packages)? |
| 201 |
% \begin{macrocode} |
| 202 |
\newif\if@fancyref |
| 203 |
\@fancyreftrue |
| 204 |
\DeclareOption{fancyref}{\@fancyreftrue} |
| 205 |
\DeclareOption{nofancyref}{\@fancyreffalse} |
| 206 |
% \end{macrocode} |
| 207 |
% \descOpt{html\\nohtml} |
| 208 |
% Provide HTML commands (default, requires the |html| package bundled with |
| 209 |
% \LaTeX2HTML)? |
| 210 |
% \begin{macrocode} |
| 211 |
\newif\if@html |
| 212 |
\@htmltrue |
| 213 |
\DeclareOption{html}{\@htmltrue} |
| 214 |
\DeclareOption{nohtml}{\@htmlfalse} |
| 215 |
%</class> |
| 216 |
% \end{macrocode} |
| 217 |
% \subsection{Options for the hcart and hcreport classes} |
| 218 |
% \descOpt{headsepline\\headnosepline} |
| 219 |
% Draw a horizontal line below the header line (default)? |
| 220 |
% \begin{macrocode} |
| 221 |
%<*hcart|hcreport> |
| 222 |
\newif\if@defhsl |
| 223 |
\@defhsltrue |
| 224 |
\DeclareOption{headsepline}{\PassOptionsToClass |
| 225 |
{\CurrentOption}{\superclass}\@defhslfalse} |
| 226 |
\DeclareOption{headnosepline}{\PassOptionsToClass |
| 227 |
{\CurrentOption}{\superclass}\@defhslfalse} |
| 228 |
% \end{macrocode} |
| 229 |
% \descOpt{onecolumn\\twocolumn} |
| 230 |
% Set the text in one or two columns (default is one)? |
| 231 |
% \begin{macrocode} |
| 232 |
\DeclareOption{onecolumn}{\PassOptionsToClass |
| 233 |
{\CurrentOption}{\superclass}} |
| 234 |
\DeclareOption{twocolumn}{\PassOptionsToClass |
| 235 |
{\CurrentOption}{\superclass}} |
| 236 |
% \end{macrocode} |
| 237 |
% \descOpt{hcarea\\hcnoarea} |
| 238 |
% Set the default area to 240mm $\times$ 150mm (default)? Otherwise, |
| 239 |
% the default value from the |scrartcl| resp. |scrreprt| classes is used |
| 240 |
% if you do not set the area manually (e.g. with the |\areaset| command). |
| 241 |
% \begin{macrocode} |
| 242 |
\newif\if@hcarea |
| 243 |
\@hcareatrue |
| 244 |
\DeclareOption{hcarea}{\@hcareatrue} |
| 245 |
\DeclareOption{hcnoarea}{\@hcareafalse} |
| 246 |
% \end{macrocode} |
| 247 |
% \descOpt{hcfootnotes\\hcnofootnotes} |
| 248 |
% Nicer formatting of footnotes (default)? |
| 249 |
% \begin{macrocode} |
| 250 |
\newif\if@hcfootnotes |
| 251 |
\@hcfootnotestrue |
| 252 |
\DeclareOption{hcfootnotes}{\@hcfootnotestrue} |
| 253 |
\DeclareOption{hcnofootnotes}{\@hcfootnotesfalse} |
| 254 |
% \end{macrocode} |
| 255 |
% \descOpt{magazine} |
| 256 |
% Provide commands for magazine or newspaper articles? This sets the |
| 257 |
% |html| option too. |
| 258 |
% \begin{macrocode} |
| 259 |
\newif\if@magazine |
| 260 |
\@magazinefalse |
| 261 |
\DeclareOption{magazine}{\@magazinetrue\@htmltrue} |
| 262 |
% \end{macrocode} |
| 263 |
% \descOpt{parskip} |
| 264 |
% Skip paragraphs instead of indenting them? |
| 265 |
% \begin{macrocode} |
| 266 |
\newif\if@parskip |
| 267 |
\@parskipfalse |
| 268 |
\DeclareOption{parskip}{\@parskiptrue} |
| 269 |
% \end{macrocode} |
| 270 |
% \descOpt{wide} |
| 271 |
% Use a wide line distance (ca. 1.5)? |
| 272 |
% \begin{macrocode} |
| 273 |
\newif\if@wide |
| 274 |
\@widefalse |
| 275 |
\DeclareOption{wide}{\@widetrue} |
| 276 |
%</hcart|hcreport> |
| 277 |
% \end{macrocode} |
| 278 |
% \subsection{Options for the hcart, hcreport and hcletter classes} |
| 279 |
% \descOpt{10pt\\11pt\\12pt} |
| 280 |
% Use a font size of 10, 11, or 12 (default) points? |
| 281 |
% \begin{macrocode} |
| 282 |
%<*hcart|hcreport|hcletter> |
| 283 |
\newif\if@defsize |
| 284 |
\@defsizetrue |
| 285 |
\DeclareOption{10pt}{\PassOptionsToClass{\CurrentOption}{\superclass} |
| 286 |
\@defsizefalse} |
| 287 |
\DeclareOption{11pt}{\PassOptionsToClass{\CurrentOption}{\superclass} |
| 288 |
\@defsizefalse} |
| 289 |
\DeclareOption{12pt}{\PassOptionsToClass{\CurrentOption}{\superclass} |
| 290 |
\@defsizefalse} |
| 291 |
%</hcart|hcreport|hcletter> |
| 292 |
% \end{macrocode} |
| 293 |
% \subsection{Options for the hcart, hcreport and hcslides classes} |
| 294 |
% \descOpt{bib\\nobib} |
| 295 |
% Use \BibTeX? |
| 296 |
% \begin{macrocode} |
| 297 |
%<*hcart|hcreport|hcslides> |
| 298 |
\newif\if@bib |
| 299 |
\@bibfalse |
| 300 |
\DeclareOption{bib}{\@bibtrue} |
| 301 |
\DeclareOption{nobib}{\@bibfalse} |
| 302 |
% \end{macrocode} |
| 303 |
% \descOpt{fnbib\\autbib\\numbib} |
| 304 |
% \BibTeX\ references are written in footnotes (default) or in |
| 305 |
% author-year or in numerical style. |
| 306 |
% These options set the |bib| option too. |
| 307 |
% \begin{macrocode} |
| 308 |
\newif\if@fnbib |
| 309 |
\@fnbibtrue |
| 310 |
\newif\if@autbib |
| 311 |
\@autbibfalse |
| 312 |
\newif\if@numbib |
| 313 |
\@numbibfalse |
| 314 |
\DeclareOption{fnbib}{\@fnbibtrue\@autbibfalse\@numbibfalse\@bibtrue} |
| 315 |
\DeclareOption{autbib}{\@fnbibfalse\@autbibtrue\@numbibfalse\@bibtrue} |
| 316 |
\DeclareOption{numbib}{\@fnbibfalse\@autbibfalse\@numbibtrue\@bibtrue} |
| 317 |
% \end{macrocode} |
| 318 |
% \descOpt{htmlbib\\nohtmlbib} |
| 319 |
% Use the |html| package for online references with \BibTeX\ (default)? |
| 320 |
% This loads the |html| option too. |
| 321 |
% \begin{macrocode} |
| 322 |
\newif\if@htmlbib |
| 323 |
\@htmlbibtrue |
| 324 |
\DeclareOption{htmlbib}{\@htmlbibtrue\@htmltrue} |
| 325 |
\DeclareOption{nohtmlbib}{\@htmlbibfalse} |
| 326 |
% \end{macrocode} |
| 327 |
% \descOpt{paper} |
| 328 |
% Provide formatting and commands for a scientific paper? This sets the |
| 329 |
% |bib| and |html| options too. |
| 330 |
% \begin{macrocode} |
| 331 |
\newif\if@paper |
| 332 |
\@paperfalse |
| 333 |
\DeclareOption{paper}{\@papertrue\@bibtrue\@htmltrue} |
| 334 |
% \end{macrocode} |
| 335 |
% \descOpt{pdf\\nopdf} |
| 336 |
% Prepare file for the PDF format? This loads the |hyperref| package. |
| 337 |
% This option is set automagically by running |pdflatex|. |
| 338 |
% \begin{macrocode} |
| 339 |
\newif\if@pdf |
| 340 |
\ifx\pdfoutput\undefined |
| 341 |
\@pdffalse |
| 342 |
\else |
| 343 |
\@pdftrue |
| 344 |
\fi |
| 345 |
\DeclareOption{pdf}{\@pdftrue} |
| 346 |
\DeclareOption{nopdf}{\@pdffalse} |
| 347 |
%</hcart|hcreport|hcslides> |
| 348 |
% \end{macrocode} |
| 349 |
% \subsection{Options for the hcreport class} |
| 350 |
% \descOpt{openany\\openright} |
| 351 |
% Start new chapters always on a right page (not by default)? |
| 352 |
% \begin{macrocode} |
| 353 |
%<*hcreport> |
| 354 |
\DeclareOption{openany} |
| 355 |
{\PassOptionsToClass{\CurrentOption}{\superclass}} |
| 356 |
\DeclareOption{openright} |
| 357 |
{\PassOptionsToClass{\CurrentOption}{\superclass}} |
| 358 |
%</hcreport> |
| 359 |
% \end{macrocode} |
| 360 |
% \subsection{Options for the hcslides class} |
| 361 |
% \descOpt{twotoc\\onetoc} |
| 362 |
% Print table of contents in two columns (requires the |multicol| package)? |
| 363 |
% \begin{macrocode} |
| 364 |
%<*hcslides> |
| 365 |
\newif\if@twotoc |
| 366 |
\@twotocfalse |
| 367 |
\DeclareOption{twotoc}{\@twotoctrue} |
| 368 |
\DeclareOption{onetoc}{\@twotocfalse} |
| 369 |
%</hcslides> |
| 370 |
% \end{macrocode} |
| 371 |
% \subsection{Other Options} |
| 372 |
% Other options are ignored. |
| 373 |
% \begin{macrocode} |
| 374 |
%<*class> |
| 375 |
\DeclareOption*{\ClassWarning{\thisclass}% |
| 376 |
{Unknown Option: `\CurrentOption '}% |
| 377 |
} |
| 378 |
% \end{macrocode} |
| 379 |
% Options not implemented: |
| 380 |
% \begin{widedesc} |
| 381 |
% \item[scrartcl, scrlettr, scrreprt] |
| 382 |
% paper sizes except a4 and letter (a5paper, b5paper, legalpaper, |
| 383 |
% executivepaper ...); oneside, twoside; |
| 384 |
% \item[scrartcl, scrreprt] |
| 385 |
% DIV\dots, DIVcalc, DIVclassic, BCOR; headinclude, headexclude, footinclude, |
| 386 |
% footexclude; footsepline, footnosepline; |
| 387 |
% bigheadings, normalheadings, smallheadings; |
| 388 |
% pointednumbers, pointlessnumbers; abstracton, abstractoff; |
| 389 |
% titlepage, notitlepage; leqno, fleqn; openbib; portrait, landscape; |
| 390 |
% draft, final; bibtotocnumbered; |
| 391 |
% \item[scrlettr] |
| 392 |
% orgdate; wlocfield, slocfield; |
| 393 |
% \item[seminar] |
| 394 |
% portrait, landscape; article, slidesonly, notes, |
| 395 |
% notesonly; semlayer, semcolor. |
| 396 |
% \end{widedesc} |
| 397 |
% \section{Commands and Environments} |
| 398 |
% \subsection{Configuration} |
| 399 |
% \descCom{defaulttitle\arg{title}\comdiv |
| 400 |
% defaultauthor\arg{author}\comdiv |
| 401 |
% defaultaddress\arg{address}\comdiv |
| 402 |
% defaultemail\arg{mail-address}\comdiv |
| 403 |
% defaulthomepage\arg{website}} |
| 404 |
% Used if no author information is specified. |
| 405 |
% They are all empty by default. Renew them in one of the config files |
| 406 |
% (see below). |
| 407 |
% \descCom{autdiv} |
| 408 |
% Use instead of |\\| in |\defaultauthor|. |
| 409 |
% \descCom{autinfodiv} |
| 410 |
% Use instead of |\\| in |\defaultaddress| etc. |
| 411 |
% \begin{macrocode} |
| 412 |
\newcommand{\defaulttitle}{} |
| 413 |
\newcommand{\defaultauthor}{} |
| 414 |
\newcommand{\defaultaddress}{} |
| 415 |
\newcommand{\defaultemail}{} |
| 416 |
\newcommand{\defaulthomepage}{} |
| 417 |
\newcommand{\currenttitle}{\defaulttitle} |
| 418 |
\newcommand{\currentauthor}{\defaultauthor} |
| 419 |
\newcommand{\autdiv}{\\[-0.4ex]\normalfont\Large} |
| 420 |
\newcommand{\autinfodiv}{\\[-1ex]\normalfont\normalsize} |
| 421 |
\ProcessOptions\relax |
| 422 |
%</class> |
| 423 |
%<*hcart|hcreport> |
| 424 |
\if@defhsl |
| 425 |
\PassOptionsToClass{headsepline}{\superclass} |
| 426 |
\fi |
| 427 |
% \end{macrocode} |
| 428 |
% The |twoside|, |pointlessnumbers|, |
| 429 |
% |liststotoc|, |bibtotoc| and |idxtotoc| |
| 430 |
% options are always used with the |hcart| and |hcreport| classes. |
| 431 |
% The |hcletter| class always uses the |wlocfield| option. |
| 432 |
% \begin{macrocode} |
| 433 |
\PassOptionsToClass{twoside,pointlessnumbers,liststotoc, |
| 434 |
bibtotoc,idxtotoc}{\superclass} |
| 435 |
%</hcart|hcreport> |
| 436 |
%<hcletter>\PassOptionsToClass{wlocfield}{\superclass} |
| 437 |
%<*hcart|hcreport|hcletter> |
| 438 |
\if@defsize |
| 439 |
\PassOptionsToClass{12pt}{\superclass} |
| 440 |
\fi |
| 441 |
%</hcart|hcreport|hcletter> |
| 442 |
%<*class> |
| 443 |
\if@deflang |
| 444 |
\PassOptionsToPackage{english}{babel} |
| 445 |
\fi |
| 446 |
\if@defpaper |
| 447 |
%<hcart|hcreport> \PassOptionsToClass{a4paper}{\superclass} |
| 448 |
%<hcslides> \PassOptionsToClass{a4}{\superclass} |
| 449 |
\PassOptionsToPackage{a4paper}{hyperref} |
| 450 |
\fi |
| 451 |
\LoadClass{\superclass} |
| 452 |
% \end{macrocode} |
| 453 |
% The normal spacing is used after the end of a sentence. |
| 454 |
% \begin{macrocode} |
| 455 |
\sloppy |
| 456 |
\clubpenalty9999 |
| 457 |
\@clubpenalty\clubpenalty |
| 458 |
\widowpenalty9999 |
| 459 |
\displaywidowpenalty1000 |
| 460 |
\brokenpenalty1000 |
| 461 |
\frenchspacing |
| 462 |
% \end{macrocode} |
| 463 |
% The modern font encoding (T1) and the latin1 input encoding are used |
| 464 |
% (this requires the |T1| and |latin1| packages). The |ifthen|, |
| 465 |
% the |babel| and the |xspace| packages are always used. |
| 466 |
% The |bib| option loads the |natbib| package. |
| 467 |
% \begin{macrocode} |
| 468 |
%<hcart|hcreport|hcslides>\RequirePackage{natbib} |
| 469 |
\RequirePackage[T1]{fontenc} |
| 470 |
\RequirePackage[latin1]{inputenc} |
| 471 |
\RequirePackage{ifthen} |
| 472 |
\RequirePackage{babel} |
| 473 |
\RequirePackage{xspace} |
| 474 |
% \end{macrocode} |
| 475 |
% The config file |hc.cfg| is used by all classes. Every class also |
| 476 |
% uses a config file with its own name, e.g. the hcart class uses |
| 477 |
% |hcart.cfg|. The settings in |hc.cfg| may be overwritten by the |
| 478 |
% class specific config files. |
| 479 |
% \begin{macrocode} |
| 480 |
\InputIfFileExists{hc.cfg}{% |
| 481 |
\ClassInfo{\thisclass} |
| 482 |
{Loading configuration file hc.cfg}}{% |
| 483 |
\ClassInfo{\thisclass} |
| 484 |
{Configuration file hc.cfg not found}} |
| 485 |
\InputIfFileExists{\thisclass.cfg}{% |
| 486 |
\ClassInfo{\thisclass} |
| 487 |
{Loading configuration file \thisclass.cfg}}{% |
| 488 |
\ClassInfo{\thisclass} |
| 489 |
{Configuration file \thisclass.cfg not found}} |
| 490 |
% \end{macrocode} |
| 491 |
% \subsection{General Commands and Environments} |
| 492 |
% \descCom{q\arg{quote}} |
| 493 |
% \rarg{quote} is put into quotation marks. May be nested: A quote inside |
| 494 |
% another quote uses inner quotation marks. |
| 495 |
% \begin{macrocode} |
| 496 |
\newcommand{\nextstartq}{`} |
| 497 |
\newcommand{\nextendq}{'} |
| 498 |
\newcommand{\otherstartq}{``} |
| 499 |
\newcommand{\otherendq}{''} |
| 500 |
\newcommand{\tmpq}{} |
| 501 |
\newcommand{\q}[1]{\nextstartq{}% |
| 502 |
\let\tmpq\nextstartq% |
| 503 |
\let\nextstartq\otherstartq% |
| 504 |
\let\otherstartq\tmpq% |
| 505 |
\let\tmpq\nextendq% |
| 506 |
\let\nextendq\otherendq% |
| 507 |
\let\otherendq\tmpq% |
| 508 |
#1% |
| 509 |
\let\tmpq\nextstartq% |
| 510 |
\let\nextstartq\otherstartq% |
| 511 |
\let\otherstartq\tmpq% |
| 512 |
\let\tmpq\nextendq% |
| 513 |
\let\nextendq\otherendq% |
| 514 |
\let\otherendq\tmpq% |
| 515 |
\nextendq{}% |
| 516 |
} |
| 517 |
% \end{macrocode} |
| 518 |
% \descCom{hq\arg{quote}} |
| 519 |
% \rarg{quote} is always put into inner (\hq{half}) quotation marks. |
| 520 |
% \begin{macrocode} |
| 521 |
\newcommand{\hq}[1]{``#1''} |
| 522 |
% \end{macrocode} |
| 523 |
% \descCom{fq\arg{quote}} |
| 524 |
% \rarg{quote} is always put into outer (\fq{full}) quotation marks. |
| 525 |
% \begin{macrocode} |
| 526 |
\newcommand{\fq}[1]{`#1'} |
| 527 |
% \end{macrocode} |
| 528 |
% \descCom{dash\arg{text}} |
| 529 |
% \rarg{text} is put between dashes. |
| 530 |
% \begin{macrocode} |
| 531 |
\newcommand{\dash}[1]{---#1---} |
| 532 |
% \end{macrocode} |
| 533 |
% \descEnv[\oarg{separator}\arg{longest-title}]{flexlist} |
| 534 |
% A list environment similar to the |description| environment. |
| 535 |
% All items are indented by the width of \rarg{longest-title}. |
| 536 |
% The default \rarg{separator} is \q{:}. |
| 537 |
% \begin{macrocode} |
| 538 |
\newenvironment{flexlist}[2][:] |
| 539 |
{\begin{list}{} |
| 540 |
{\settowidth{\labelwidth}{\sffamily\bfseries #2#1 } |
| 541 |
\setlength{\leftmargin}{\labelwidth} |
| 542 |
\addtolength{\leftmargin}{\labelsep} |
| 543 |
\renewcommand{\makelabel}[1] |
| 544 |
{\sffamily\bfseries ##1#1 \hfill}}} |
| 545 |
{\end{list}} |
| 546 |
% \end{macrocode} |
| 547 |
% \descEnv[\oarg{separator}]{widedesc} |
| 548 |
% A variation of the |flexlist| environment. |
| 549 |
% All items are indented by the width of a date (\q{00.00.0000}). |
| 550 |
% The default \rarg{separator} is \q{:}. |
| 551 |
% \begin{macrocode} |
| 552 |
\newenvironment{widedesc}[1][:] |
| 553 |
{\begin{flexlist}[#1]{00.00.0000}} |
| 554 |
{\end{flexlist}} |
| 555 |
% \end{macrocode} |
| 556 |
% \descCom{pcent\arg{value}} |
| 557 |
% Prints \rarg{value} followed by the percent symbol \%. |
| 558 |
% \begin{macrocode} |
| 559 |
\newcommand{\pcent}[1]{#1\,\%} |
| 560 |
% \end{macrocode} |
| 561 |
% \descCom{qdots} |
| 562 |
% Prints the scientific omission symbol \qdots. |
| 563 |
% \begin{macrocode} |
| 564 |
\newcommand{\qdots}{\mbox{[\dots]}\xspace} |
| 565 |
% \end{macrocode} |
| 566 |
% \descCom{phyp} |
| 567 |
% Prints a (part of a) word in parenthesis, ended by a hypen, like |
| 568 |
% \phyp{love}letter. |
| 569 |
% \begin{macrocode} |
| 570 |
\newcommand{\phyp}[1] |
| 571 |
{(#1\textormath{\leavevmode\hbox{-}}{-})\hskip\z@skip} |
| 572 |
% \end{macrocode} |
| 573 |
% \descCom{arrow} |
| 574 |
% Prints an arrow: \arrow. |
| 575 |
% \begin{macrocode} |
| 576 |
\newcommand{\arrow}{\ensuremath{\rightarrow}\xspace} |
| 577 |
% \end{macrocode} |
| 578 |
% \descCom{f\comdiv ff} |
| 579 |
% Print the abbreviations for \q{the following page(s)} |
| 580 |
% (\q{f} resp. \q{ff} after a small space). |
| 581 |
% \begin{macrocode} |
| 582 |
\newcommand{\f}{\,f} |
| 583 |
\newcommand{\ff}{\,ff} |
| 584 |
% \end{macrocode} |
| 585 |
% \descCom{distance} |
| 586 |
% Starts a new un-indented paragraph following an empty line. |
| 587 |
% \begin{macrocode} |
| 588 |
\newcommand{\distance}{\par\bigskip\noindent} |
| 589 |
% \end{macrocode} |
| 590 |
% \descCom{stardistance} |
| 591 |
% Starts a new un-indented paragraph following three centered stars. |
| 592 |
% \begin{macrocode} |
| 593 |
\newcommand{\stardistance} |
| 594 |
{\par\bigskip{\centering *~~~*~~~*\par}\bigskip\noindent} |
| 595 |
% \end{macrocode} |
| 596 |
% \descCom{linedistance} |
| 597 |
% Starts a new un-indented paragraph following an horizontal rule. |
| 598 |
% \begin{macrocode} |
| 599 |
\newcommand{\linedistance}{% |
| 600 |
\begin{center} |
| 601 |
\begin{tabular}{p{0.33\textwidth}} |
| 602 |
\hrule |
| 603 |
\end{tabular} |
| 604 |
\end{center} |
| 605 |
\medskip\noindent% |
| 606 |
} |
| 607 |
% \end{macrocode} |
| 608 |
% \descCom{sig\arg{name}} |
| 609 |
% Prints \rarg{name} as signature (flushright in italics). |
| 610 |
% \begin{macrocode} |
| 611 |
\newcommand{\sig}[1]{\par{\raggedleft\emph{#1}\par}} |
| 612 |
% \end{macrocode} |
| 613 |
% \descCom{intro\arg{text}} |
| 614 |
% \rarg{text} is centered in an extra paragraph, using a bold font. |
| 615 |
% Followed by some space. |
| 616 |
% \begin{macrocode} |
| 617 |
\newcommand{\intro}[1]{{\par\centering\textbf{#1}\par} |
| 618 |
\medskip\noindent\ignorespaces} |
| 619 |
% \end{macrocode} |
| 620 |
% \descCom{hint\arg{text}} |
| 621 |
% \rarg{text} is centered in an extra paragraph, using a large font. |
| 622 |
% \begin{macrocode} |
| 623 |
\newcommand{\hint}[1]{{\par\centering\LARGE #1\par} |
| 624 |
\noindent\ignorespaces} |
| 625 |
% \end{macrocode} |
| 626 |
% \descCom{cen\arg{text}} |
| 627 |
% An alternative to the |center| environment using less space before and after. |
| 628 |
% \begin{macrocode} |
| 629 |
\newcommand{\cen}[1] |
| 630 |
{{\par\centering #1\par}\noindent\ignorespaces} |
| 631 |
% \end{macrocode} |
| 632 |
% \descCom{marginbox\arg{text}} |
| 633 |
% A text in a box, set out into the margin. Lines are divided by |\\|. |
| 634 |
% \begin{macrocode} |
| 635 |
\newcommand{\marginbox}[1]% |
| 636 |
{\par\small\addvspace{4.5ex plus 1ex}% |
| 637 |
\vskip -\parskip |
| 638 |
%<hcart|hcletter|hcreport> \noindent\hspace{-.75\leftmargini}% |
| 639 |
%<hcslides> \noindent |
| 640 |
\begin{tabular}{|l|}\hline\ignorespaces |
| 641 |
#1 |
| 642 |
\\\hline\end{tabular}\nobreak\par\nobreak |
| 643 |
\vspace{2.3ex}\vskip -\parskip\noindent\ignorespaces} |
| 644 |
% \end{macrocode} |
| 645 |
% \descCom{rightaddress} |
| 646 |
% Like the |\verse| environment, but moved to the right as far as possible. |
| 647 |
% Lines are divided by |\\|. |
| 648 |
% \begin{macrocode} |
| 649 |
\newcommand{\rightaddress}[1]{% |
| 650 |
\par\medskip |
| 651 |
{\raggedleft \begin{tabular}{l}\ignorespaces |
| 652 |
#1 |
| 653 |
\end{tabular} |
| 654 |
\medskip\par}\noindent\ignorespaces% |
| 655 |
} |
| 656 |
% \end{macrocode} |
| 657 |
% \descCom{shorttoday} |
| 658 |
% Prints the short form (YY/MM/DD) of the current date (|\today|). |
| 659 |
% \begin{macrocode} |
| 660 |
\newcounter{shortyear} |
| 661 |
\setcounter{shortyear}{\the\year} |
| 662 |
\addtocounter{shortyear}{-1900} |
| 663 |
\whiledo{\theshortyear>99}{\addtocounter{shortyear}{-100}} |
| 664 |
\newcommand{\shorttoday} |
| 665 |
{\two@digits{\theshortyear}/\the\month/\the\day\xspace} |
| 666 |
% \end{macrocode} |
| 667 |
% \descEnv{dialog} |
| 668 |
% An environment for dialogues and screenplay-like scenes. |
| 669 |
% Use the |\newspeaker| command to make the persons you want to |
| 670 |
% use in the dialogues. |
| 671 |
% \begin{macrocode} |
| 672 |
\newenvironment{dialog} |
| 673 |
{\begin{flexlist}[\normalfont\emph{:}]{i} |
| 674 |
\setlength{\itemsep}{0ex}} |
| 675 |
{\end{flexlist}} |
| 676 |
\makeatletter |
| 677 |
% \end{macrocode} |
| 678 |
% \descCom{newspeaker\arg{command-name}\arg{speaker's-name}} |
| 679 |
% Produces the command \rarg{command-name} to mark the speeches of |
| 680 |
% \rarg{speaker's-name} in a dialogue. \rarg{command-name} must begin |
| 681 |
% with a backslash, like all commands.\\ |
| 682 |
% Then the command \rarg{command-name} may be called in a |dialog| |
| 683 |
% environment as follows:\\ |
| 684 |
% |command-name\oarg{optional-explanation}\arg{speech-contribution}| |
| 685 |
% \begin{macrocode} |
| 686 |
\newcommand{\newspeaker}[2]{\newcommand{#1}[2][] |
| 687 |
{\item[\normalfont\emph{#2\ifthenelse{\equal{##1}{}} |
| 688 |
{}{ (##1)}}] ##2}} |
| 689 |
% \end{macrocode} |
| 690 |
% \descCom{enge\arg{English text}\arg{German text}} |
| 691 |
% Prints \arg{English text}. With the |german| option, \rarg{German text} |
| 692 |
% is printed instead. |
| 693 |
% \begin{macrocode} |
| 694 |
\newcommand{\enge}[2]{#1} |
| 695 |
% \end{macrocode} |
| 696 |
% Some language specific texts. |
| 697 |
% \begin{macrocode} |
| 698 |
\newcommand{\versiontext}{Version date:} |
| 699 |
\newcommand{\onlinetext}{Online:} |
| 700 |
\newcommand{\accesstext}{Access date:} |
| 701 |
\newcommand{\cftext}{cf.} |
| 702 |
\newcommand{\bibvoltext}{of} |
| 703 |
\newcommand{\bvtext}{vol.} |
| 704 |
\newcommand{\bibdir}{Director } |
| 705 |
\newcommand{\bibmovtext}{Movie} |
| 706 |
\newcommand{\bibactorsbefore}{With} |
| 707 |
\newcommand{\bibactorsafter}{et~al} |
| 708 |
\newcommand{\noyear}{n.d.} |
| 709 |
\newcommand{\noaddress}{n.p.} |
| 710 |
\newcommand{\otherabstractname}{Zusammenfassung} |
| 711 |
\newcommand{\keywordsname}{Keywords} |
| 712 |
% \end{macrocode} |
| 713 |
% \subsubsection{The palatino option} |
| 714 |
% \begin{macrocode} |
| 715 |
\if@palatino |
| 716 |
\RequirePackage{palatino} |
| 717 |
\RequirePackage{mathpple} |
| 718 |
\fi |
| 719 |
% \end{macrocode} |
| 720 |
% \subsubsection{The ding option} |
| 721 |
% \begin{macrocode} |
| 722 |
\if@ding |
| 723 |
\RequirePackage{pifont} |
| 724 |
% \end{macrocode} |
| 725 |
% \descCom{tick} |
| 726 |
% Prints a tick. |
| 727 |
% \begin{macrocode} |
| 728 |
\newcommand{\tick}{\ding{52}} |
| 729 |
% \end{macrocode} |
| 730 |
% \descCom{cross} |
| 731 |
% Prints a cross. |
| 732 |
% \begin{macrocode} |
| 733 |
\newcommand{\cross}{\ding{56}} |
| 734 |
% \end{macrocode} |
| 735 |
% \descCom{checkbox} |
| 736 |
% Prints a checkbox. |
| 737 |
% \begin{macrocode} |
| 738 |
\newcommand{\checkbox}{\ding{114}} |
| 739 |
% \end{macrocode} |
| 740 |
% \descEnv{ticklist} |
| 741 |
% A item environment which uses a tick as label |
| 742 |
% (e.g. for lists of do's). |
| 743 |
% \begin{macrocode} |
| 744 |
\newenvironment{ticklist} |
| 745 |
{\begin{dinglist}{52}}{\end{dinglist}} |
| 746 |
% \end{macrocode} |
| 747 |
% \descEnv{crosslist} |
| 748 |
% A item environment which uses a cross as label |
| 749 |
% (e.g. for lists of don't). |
| 750 |
% \begin{macrocode} |
| 751 |
\newenvironment{crosslist} |
| 752 |
{\begin{dinglist}{56}}{\end{dinglist}} |
| 753 |
% \end{macrocode} |
| 754 |
% \descEnv{checklist} |
| 755 |
% A item environment which uses a checkbox as label |
| 756 |
% (e.g. for check lists). |
| 757 |
% \begin{macrocode} |
| 758 |
\newenvironment{checklist} |
| 759 |
{\begin{dinglist}{114}}{\end{dinglist}} |
| 760 |
\fi |
| 761 |
% \end{macrocode} |
| 762 |
% \subsubsection{The euro option} |
| 763 |
% \descCom{E} |
| 764 |
% Prints the Euro symbol \E. |
| 765 |
% \descCom{Es\arg{value}} |
| 766 |
% Prints the Euro symbol followed by \rarg{value}. |
| 767 |
% \begin{macrocode} |
| 768 |
\if@euro |
| 769 |
\RequirePackage[right,notextcomp]{eurofont} |
| 770 |
\newcommand{\E}{\textsf{\makefakelighteuro}\xspace} |
| 771 |
\newcommand{\Es}[1]{\E\nobreak\,#1} |
| 772 |
\fi |
| 773 |
% \end{macrocode} |
| 774 |
% \subsubsection{The fancyref option} |
| 775 |
% Loads the |fancyref| package which provides the command |
| 776 |
% |\fref|\arg{prefix:labelname}. This prints not only the number, but also |
| 777 |
% the type of a reference. The following prefixes (types) are recognized: |
| 778 |
% |chap| (Chapter), |
| 779 |
% |sec| (Section), |
| 780 |
% |eq| (Equation), |
| 781 |
% |fig| (Figure), |
| 782 |
% |tab| (Table), |
| 783 |
% |enum| (Enumeration), |
| 784 |
% |fn| (Footnote). |
| 785 |
% At the beginning of a sentence use |\Fref| instead, which gives upper-case |
| 786 |
% output (in German documents there is no difference). |
| 787 |
% \begin{macrocode} |
| 788 |
\if@fancyref |
| 789 |
\RequirePackage{fancyref} |
| 790 |
\fi |
| 791 |
% \end{macrocode} |
| 792 |
% \descCom{see\arg{reference}} |
| 793 |
% Prints \q{see \rarg{reference}} in a footnote, using the |\fref| command |
| 794 |
% to print \rarg{reference}. |
| 795 |
% \begin{macrocode} |
| 796 |
\newcommand{\seetext}{see} |
| 797 |
\newcommand{\see}[1]{\footnote{\seetext\ \fref{#1}}} |
| 798 |
% \end{macrocode} |
| 799 |
% \subsubsection{The html option} |
| 800 |
% \descCom{htlink\arg{linked text}\arg{url}} |
| 801 |
% Prints \rarg{linked text} followed by the \rarg{url}. With the |paper| |
| 802 |
% option, a footnote is used. In the HTML version |
| 803 |
% \rarg{linked text} becomes an active link to \rarg{url}. |
| 804 |
% \descCom{hturl\arg{url}} |
| 805 |
% Prints \rarg{url} nice and makes it an active link in the |
| 806 |
% HTML version. |
| 807 |
% \descCom{htmail\arg{mail-adress}} |
| 808 |
% Prints \rarg{mail-adress} nice and makes it an active email link in the |
| 809 |
% HTML version. |
| 810 |
% \begin{macrocode} |
| 811 |
\if@html |
| 812 |
%</class> |
| 813 |
%<*hcletter> |
| 814 |
\newcounter{part} |
| 815 |
\newcounter{section} |
| 816 |
\newcounter{subsection} |
| 817 |
\newcounter{subsubsection} |
| 818 |
\newcounter{paragraph} |
| 819 |
\newcommand{\part}{} |
| 820 |
\newcommand{\section}{} |
| 821 |
\newcommand{\subsection}{} |
| 822 |
\newcommand{\subsubsection}{} |
| 823 |
\newcommand{\paragraph}{} |
| 824 |
\newcommand{\subparagraph}{} |
| 825 |
\RequirePackage{html} |
| 826 |
\newcommand{\htlink}[2] |
| 827 |
{{\htmladdnormallink{#1 \texttt{<#2>}}{#2}}} |
| 828 |
%</hcletter> |
| 829 |
%<*hcart|hcreport|hcslides> |
| 830 |
\RequirePackage{html} |
| 831 |
\if@paper |
| 832 |
\newcommand{\htlink}[2] |
| 833 |
{\htmladdnormallink{#1}{#2}% |
| 834 |
\footnote{\htmladdnormallink{\texttt{#2}}{#2}}} |
| 835 |
\else |
| 836 |
\newcommand{\htlink}[2] |
| 837 |
{{\htmladdnormallink{#1 \texttt{<#2>}}{#2}}} |
| 838 |
\fi |
| 839 |
%</hcart|hcreport|hcslides> |
| 840 |
%<*class> |
| 841 |
\newcommand{\hturl}[1] |
| 842 |
{{\htmladdnormallink{\texttt{#1}}{#1}}} |
| 843 |
\newcommand{\htmail}[1] |
| 844 |
{{\htmladdnormallink{\texttt{#1}}{mailto:#1}}} |
| 845 |
\fi |
| 846 |
%</class> |
| 847 |
% \end{macrocode} |
| 848 |
% \subsection{Commands and Environments for the hcart and hcreport classes} |
| 849 |
% The default depth of section numbering and table of contents is three. |
| 850 |
% |headings| is the default page style. The page number is printed in the |
| 851 |
% header line, the footer line is empty. |
| 852 |
% \begin{macrocode} |
| 853 |
%<*hcart|hcreport> |
| 854 |
\setcounter{secnumdepth}{3} |
| 855 |
\setcounter{tocdepth}{3} |
| 856 |
\RequirePackage[breakwords]{truncate} |
| 857 |
\newlength{\rightmarklength} |
| 858 |
\def\ps@headings{\let\@mkboth\markboth |
| 859 |
\def\@evenhead{\vbox{\hsize=\textwidth |
| 860 |
\hb@xt@ \textwidth{% |
| 861 |
{\pnumfont\thepage\hfil\headfont\truncate{0.92\textwidth}% |
| 862 |
{\raggedleft\strut\leftmark}}}% |
| 863 |
\if@hsl \vskip 1.5\p@ \hrule \fi}} |
| 864 |
\def\@oddhead{\settowidth{\rightmarklength}{\rightmark}% |
| 865 |
\vbox{\hsize=\textwidth |
| 866 |
\hb@xt@ \textwidth{{\headfont\truncate{0.92\textwidth}% |
| 867 |
{\strut\ifthenelse{\lengthtest{\rightmarklength=0em}}% |
| 868 |
{\leftmark{}}{\rightmark{}}% |
| 869 |
\hfil}\hfil\pnumfont\thepage}}% |
| 870 |
\if@hsl \vskip 1.5\p@ \hrule \fi}} |
| 871 |
\def\@evenfoot{\vbox{\hsize=\textwidth |
| 872 |
\if@fsl \hrule \vskip 3\p@ \fi |
| 873 |
\hb@xt@ \textwidth{{\pnumfont\hfil}}}}% |
| 874 |
\def\@oddfoot{\vbox{\hsize=\textwidth |
| 875 |
\if@fsl \hrule \vskip 3\p@ \fi |
| 876 |
\hb@xt@ \textwidth{{\pnumfont\hfil}}}}% |
| 877 |
%<hcreport> \def\chaptermark##1{% |
| 878 |
%<hcreport> \markboth {\ifnum \c@secnumdepth >\m@ne |
| 879 |
%<hcreport> \chaptermarkformat\fi |
| 880 |
%<hcreport> ##1}{}}% |
| 881 |
%<hcreport> \def\sectionmark##1{% |
| 882 |
%<hcreport> \markright {\ifnum \c@secnumdepth >\z@ |
| 883 |
%<hcreport> \sectionmarkformat\fi |
| 884 |
%<hcreport> ##1}}} |
| 885 |
%<hcart> \def\sectionmark##1{% |
| 886 |
%<hcart> \markboth {\ifnum \c@secnumdepth >\z@% |
| 887 |
%<hcart> \sectionmarkformat\fi ##1}{}} |
| 888 |
%<hcart> \def\subsectionmark##1{% |
| 889 |
%<hcart> \markright {\ifnum \c@secnumdepth >\@ne% |
| 890 |
%<hcart> \subsectionmarkformat\fi ##1}}} |
| 891 |
\pagestyle{headings} |
| 892 |
% \end{macrocode} |
| 893 |
% \subsubsection{The hcarea option} |
| 894 |
% \begin{macrocode} |
| 895 |
\if@hcarea |
| 896 |
\RequirePackage{typearea} |
| 897 |
\areaset[15mm]{150mm}{240mm} |
| 898 |
\fi |
| 899 |
% \end{macrocode} |
| 900 |
% \subsubsection{The hcfootnotes option} |
| 901 |
% \begin{macrocode} |
| 902 |
\if@hcfootnotes |
| 903 |
\deffootnote{1em}{0.5em} |
| 904 |
{\textsuperscript{\normalfont\thefootnotemark}\,} |
| 905 |
\fi |
| 906 |
% \end{macrocode} |
| 907 |
% \subsubsection{The magazine option} |
| 908 |
% \descCom{articletitle\arg{title}} |
| 909 |
% Prints the article \rarg{title}. |
| 910 |
% \descCom{subjecttitle\arg{subject}\arg{title}} |
| 911 |
% Prints before the article \rarg{title} the \rarg{subject} in a smaller font. |
| 912 |
% \descCom{titlesubject\arg{title}\arg{subject}} |
| 913 |
% Prints after the article \rarg{title} the \rarg{subject} in a smaller font. |
| 914 |
% \descCom{articlesection\arg{heading}} |
| 915 |
% Prints a heading within an article (actually, a |\subsection*|). |
| 916 |
% \descEnv[\oarg{signature}\arg{title}]{art} |
| 917 |
% A magazine article set in two columns with a \rarg{title} (using |
| 918 |
% |\articletitle|) and an optional \rarg{signature} (using |\sig|). |
| 919 |
% Requires the |multicol| package. |
| 920 |
% \descEnv[\oarg{signature}\arg{subject}\arg{title}]{artsubtit} |
| 921 |
% Like the |art| environment, but uses |\subjecttitle| instead of |
| 922 |
% |\articletitle|. |
| 923 |
% \descEnv[\oarg{signature}\arg{title}\arg{subject}]{arttitsub} |
| 924 |
% Like the |art| environment, but uses |\titlesubject| instead of |
| 925 |
% |\articletitle|. |
| 926 |
% \begin{macrocode} |
| 927 |
\if@magazine |
| 928 |
\RequirePackage{multicol} |
| 929 |
\newcommand{\articletitle}[1] |
| 930 |
{\addsec[#1]{\LARGE #1}} |
| 931 |
\newcommand{\subjecttitle}[2] |
| 932 |
{\addsec[#2]{{\large #1}\\{\LARGE #2}}} |
| 933 |
\newcommand{\titlesubject}[2] |
| 934 |
{\addsec[#1]{{\LARGE #1}\\{\large #2}}} |
| 935 |
\newcommand{\articlesection}[1]{\subsection*{#1}} |
| 936 |
\newcommand{\currentsig}{} |
| 937 |
\newenvironment{@art}[2][]{% |
| 938 |
\begin{multicols}{2}[#2] |
| 939 |
\renewcommand{\currentsig}{#1}% |
| 940 |
}{% |
| 941 |
\ifthenelse{\equal{\currentsig}{}} |
| 942 |
{} |
| 943 |
{\sig{\currentsig}} |
| 944 |
\end{multicols}% |
| 945 |
} |
| 946 |
\newenvironment{art}[2][] |
| 947 |
{\begin{@art}[#1]{\articletitle{#2}}}{\end{@art}} |
| 948 |
\newenvironment{artsubtit}[3][] |
| 949 |
{\begin{@art}[#1]{\subjecttitle{#2}{#3}}}{\end{@art}} |
| 950 |
\newenvironment{arttitsub}[3][] |
| 951 |
{\begin{@art}[#1]{\titlesubject{#2}{#3}}}{\end{@art}} |
| 952 |
\fi |
| 953 |
% \end{macrocode} |
| 954 |
% \subsubsection{The parskip option} |
| 955 |
% \begin{macrocode} |
| 956 |
\if@parskip |
| 957 |
\setlength\parskip{\medskipamount} |
| 958 |
\setlength\parindent{0pt} |
| 959 |
\fi |
| 960 |
% \end{macrocode} |
| 961 |
% \subsubsection{The wide option} |
| 962 |
% \begin{macrocode} |
| 963 |
\if@wide |
| 964 |
\linespread{1.3} |
| 965 |
\fi |
| 966 |
%</hcart|hcreport> |
| 967 |
% \end{macrocode} |
| 968 |
% \subsection{Commands and Environments for the hcart, hcreport and |
| 969 |
% hcslides classes} |
| 970 |
% \subsubsection{The bib option} |
| 971 |
% With the |fnbib| option (default), the |\cite| and |\citet| and |\cite| |
| 972 |
% commands all work the same. |
| 973 |
% |
| 974 |
% With the |autbib| option, |\cite| always works like |\citep|, |
| 975 |
% i.\,e. puts the citation in brackets. |
| 976 |
% Use |\citet| if you do not want this. |
| 977 |
% |
| 978 |
% Commands like |\cite| should always be used \emph{without} a space between |
| 979 |
% them and the preceeding text. |
| 980 |
% \begin{macrocode} |
| 981 |
%<class>\newcommand{\bibliostyle}{hc-en} |
| 982 |
%<*hcart|hcreport|hcslides> |
| 983 |
\if@bib |
| 984 |
\if@fnbib |
| 985 |
\bibpunct[, ]{}{}{;}{a}{}{,} |
| 986 |
\renewcommand\NAT@cite% |
| 987 |
[3]{\footnote{\ifNAT@swa\NAT@@open\if*#2*\else#2\ \fi |
| 988 |
#1\if*#3*\else\NAT@cmt#3\fi\NAT@@close\else#1\fi}\endgroup} |
| 989 |
\let\@cite\NAT@cite |
| 990 |
\fi |
| 991 |
\if@autbib |
| 992 |
\bibpunct[, ]{ [}{]}{;}{a}{}{,} |
| 993 |
\let\cite\citep |
| 994 |
\fi |
| 995 |
\if@numbib |
| 996 |
\bibpunct[, ]{ [}{]}{;}{n}{}{,} |
| 997 |
\fi |
| 998 |
% \end{macrocode} |
| 999 |
% \descCom{cfcite\oarg{pages}\arg{source}} |
| 1000 |
% Shortcut for |\cite|\oarg{\cftext}\oarg{pages}\arg{source}. |
| 1001 |
% \begin{macrocode} |
| 1002 |
\newcommand{\cfcite}[2][]{\cite[\cftext][#1]{#2}} |
| 1003 |
% \end{macrocode} |
| 1004 |
% \descCom{biblio\oarg{style}\arg{bib files}} |
| 1005 |
% Writes the bibliography. \rarg{bib files} is a comma-separated list |
| 1006 |
% of bib files, \rarg{style} the \BibTeX\ style file (by default |
| 1007 |
% |hc-en| for English documents). |
| 1008 |
% \begin{macrocode} |
| 1009 |
%<hcart|hcslides>\if@paper |
| 1010 |
%<hcart|hcslides> \newcommand{\beforebiblio}{\newpage} |
| 1011 |
%<hcart|hcslides>\else |
| 1012 |
%<hcart|hcslides> \newcommand{\beforebiblio}{\vfill} |
| 1013 |
%<hcart|hcslides>\fi |
| 1014 |
\newcommand{\biblio}[2][\bibliostyle]{% |
| 1015 |
%<hcart|hcslides> \beforebiblio |
| 1016 |
\bibliographystyle{#1} |
| 1017 |
\bibliography{#2}% |
| 1018 |
} |
| 1019 |
% \end{macrocode} |
| 1020 |
% \descCom{qu\oarg{pages}\arg{source}\arg{quotation}} |
| 1021 |
% A \rarg{quotation} in quotes followed by the reference {[}\rarg{source}, |
| 1022 |
% \rarg{pages}{]}. |
| 1023 |
% \begin{macrocode} |
| 1024 |
\newcommand{\qu}[3][]{\q{#3}\cite[#1]{#2}} |
| 1025 |
% \end{macrocode} |
| 1026 |
% \descCom{qul\oarg{pages}\arg{source}\arg{quotation}} |
| 1027 |
% Like |\qu| but inside a |quote| environment (for longer quotions). |
| 1028 |
% \begin{macrocode} |
| 1029 |
\newcommand{\qul}[3][]{\begin{quote} |
| 1030 |
\qu[#1]{#2}{#3} |
| 1031 |
\end{quote}} |
| 1032 |
% \end{macrocode} |
| 1033 |
% \descCom{biburl\arg{url}\arg{access date}} |
| 1034 |
% \rarg{url} and \rarg{access date} of online documents. |
| 1035 |
% For online-only documents use a \textsc{manual} entry with |\biburl| |
| 1036 |
% in the \textsc{organization} field. |
| 1037 |
% For other documents put it in the \textsc{note} field. |
| 1038 |
% \begin{macrocode} |
| 1039 |
\if@htmlbib |
| 1040 |
\newcommand{\biburl}[2]{\onlinetext\\ |
| 1041 |
{\small\hturl{#1}}\\\accesstext\ #2} |
| 1042 |
\else |
| 1043 |
\newcommand{\biburl}[2]{\onlinetext\\ |
| 1044 |
{\small\texttt{#1}}\\\accesstext\ #2} |
| 1045 |
\fi |
| 1046 |
% \end{macrocode} |
| 1047 |
% \descCom{bibdiv} |
| 1048 |
% Separator between the title and subtitle of a document. |
| 1049 |
% \begin{macrocode} |
| 1050 |
\newcommand{\bibdiv}{. } |
| 1051 |
% \end{macrocode} |
| 1052 |
% \descCom{bibvol\oarg{separating word}\arg{volume number}\arg{serial title}} |
| 1053 |
% Use at the end of the \textsc{title} field (without space before) |
| 1054 |
% if the output of the \textsc{volume} and \textsc{series} fields |
| 1055 |
% is not convincing. Interesting |
| 1056 |
% especially for German documents where \q{der} instead of \q{von} |
| 1057 |
% is used as \rarg{separating word} (English: \q{of}). |
| 1058 |
% \begin{macrocode} |
| 1059 |
\newcommand{\bibvol}[3][\bibvoltext] |
| 1060 |
{\emph{, \bvtext~#2 #1} #3} |
| 1061 |
% \end{macrocode} |
| 1062 |
% \descCom{addrdiv} |
| 1063 |
% Separator between different places in a \BibTeX\ entry's |
| 1064 |
% \textsc{address} field. |
| 1065 |
% \begin{macrocode} |
| 1066 |
\newcommand{\addrdiv}{ -- } |
| 1067 |
% \end{macrocode} |
| 1068 |
% \descCom{etal\oarg{year}} |
| 1069 |
% Ends a list (e.\,g. of places in a \BibTeX\ entry's \textsc{address} field) |
| 1070 |
% which is not complete \mbox{(\q{\etal})}. A \rarg{year} can be given which |
| 1071 |
% is printed afterwards. |
| 1072 |
% \begin{macrocode} |
| 1073 |
\newcommand{\etal}[1][]{ et~al% |
| 1074 |
\ifthenelse{\equal{#1}{}}{}{. #1}% |
| 1075 |
} |
| 1076 |
% \end{macrocode} |
| 1077 |
% \descCom{noyear\comdiv noaddress} |
| 1078 |
% Use in the \textsc{year} resp. \textsc{address} field of a \BibTeX\ entry |
| 1079 |
% when no year resp. address is known. |
| 1080 |
% \minisec{The following commands are for movie databases |
| 1081 |
% (use \textsc{manual} entry):} |
| 1082 |
% \descCom{bibdir} |
| 1083 |
% Give the director in the \textsc{author} field in the following way:\\ |
| 1084 |
% |Surname, \bibdir, Christian Name| |
| 1085 |
% \descCom{bibmov\arg{country}\arg{studio}\arg{main actors}} |
| 1086 |
% Put in the \textsc{organization} field. |
| 1087 |
% \begin{macrocode} |
| 1088 |
\newcommand{\bibmov}[3]{\bibmovtext\bibdiv\ #2, #1\bibdiv\ |
| 1089 |
\bibactorsbefore\ #3 \bibactorsafter} |
| 1090 |
\fi |
| 1091 |
% \end{macrocode} |
| 1092 |
% \subsubsection{The pdf option} |
| 1093 |
% \begin{macrocode} |
| 1094 |
\newcommand{\hypertitle}{} |
| 1095 |
\newcommand{\hyperauthor}{} |
| 1096 |
\newcommand{\hyperabstract}{} |
| 1097 |
\newcommand{\hyperkeywords}{} |
| 1098 |
\if@pdf |
| 1099 |
\AtEndOfClass{\RequirePackage[hyperindex,colorlinks=true, |
| 1100 |
pdftex,latex2html,extension=pdf]{hyperref}} |
| 1101 |
\AtBeginDocument{% |
| 1102 |
\let\oldautdiv\autdiv |
| 1103 |
\renewcommand{\autdiv}{, } |
| 1104 |
\ifthenelse{\equal{\hypertitle}{}} |
| 1105 |
{\renewcommand{\hypertitle}{\currenttitle}}{} |
| 1106 |
\ifthenelse{\equal{\hyperauthor}{}} |
| 1107 |
{\renewcommand{\hyperauthor}{\currentauthor}}{} |
| 1108 |
\ifthenelse{\equal{\hyperabstract}{}} |
| 1109 |
{\renewcommand{\hyperabstract}{\abstext}}{} |
| 1110 |
\ifthenelse{\equal{\hyperkeywords}{}} |
| 1111 |
{\renewcommand{\hyperkeywords}{\keywordstext}}{} |
| 1112 |
\pdfinfo{ |
| 1113 |
/Title (\hypertitle) |
| 1114 |
/Author (\hyperauthor) |
| 1115 |
/Subject (\hyperabstract) |
| 1116 |
/Keywords (\hyperkeywords) |
| 1117 |
} |
| 1118 |
\let\autdiv\oldautdiv |
| 1119 |
} |
| 1120 |
\fi |
| 1121 |
%</hcart|hcreport|hcslides> |
| 1122 |
% \end{macrocode} |
| 1123 |
% \subsubsection{Title commands} |
| 1124 |
% \descCom{toc} |
| 1125 |
% Puts the table of contents at the end of the current page (i.e. after |
| 1126 |
% a vertical fill and before a pagebreak). |
| 1127 |
% With the |paper| option the table of contents is generated automatically, |
| 1128 |
% so |\toc| does nothing at all. |
| 1129 |
% \begin{macrocode} |
| 1130 |
%<*hcart|hcslides> |
| 1131 |
\if@paper |
| 1132 |
\newcommand{\@toc}{% |
| 1133 |
\newpage |
| 1134 |
%<hcart> \thispagestyle{empty} |
| 1135 |
%<hcslides> \slidepagestyle{HC} |
| 1136 |
%<hcart> \if@wide \linespread{1} \fi |
| 1137 |
\tableofcontents |
| 1138 |
%<hcart> \if@wide \linespread{1.3} \fi |
| 1139 |
\newpage% |
| 1140 |
} |
| 1141 |
\newcommand{\toc}{} |
| 1142 |
\else |
| 1143 |
\newcommand{\@toc}{% |
| 1144 |
\vfill |
| 1145 |
%<hcart> \thispagestyle{empty} |
| 1146 |
%<hcslides> \slidepagestyle{HC} |
| 1147 |
%<hcart> \if@wide \linespread{1} \fi |
| 1148 |
\tableofcontents |
| 1149 |
%<hcart> \if@wide \linespread{1.3} \fi |
| 1150 |
\newpage% |
| 1151 |
} |
| 1152 |
\newcommand{\toc}{\@toc} |
| 1153 |
\fi |
| 1154 |
%</hcart|hcslides> |
| 1155 |
%<*hcreport> |
| 1156 |
\newcommand{\@toc}{ |
| 1157 |
\if@wide \linespread{1} \fi |
| 1158 |
\tableofcontents |
| 1159 |
\if@wide \linespread{1.3} \fi |
| 1160 |
\thispagestyle{empty} |
| 1161 |
} |
| 1162 |
\if@paper |
| 1163 |
\newcommand{\toc}{} |
| 1164 |
\else |
| 1165 |
\newcommand{\toc}{\@toc} |
| 1166 |
\fi |
| 1167 |
%</hcreport> |
| 1168 |
% \end{macrocode} |
| 1169 |
% \descCom{titsubinfo\arg{main title}\arg{sub title}\arg{more info}\comdiv |
| 1170 |
% titsub\arg{main title}\arg{sub title}\comdiv |
| 1171 |
% titinfo\arg{main title}\arg{more info} |
| 1172 |
% } |
| 1173 |
% They should be used in the premable -- |
| 1174 |
% call |\tit[ver]| or |\titaut[ver]| in the document body. |
| 1175 |
% Use if your document has a main title and a sub title and/or you want to |
| 1176 |
% give additional information. Leave |
| 1177 |
% the \rarg{title} parameter of |\tit|\texttt{\qdots} empty. |
| 1178 |
% \rarg{more info} is printed below the \rarg{(sub) title} |
| 1179 |
% in a small font. |
| 1180 |
% \begin{macrocode} |
| 1181 |
%<*hcart|hcreport|hcslides> |
| 1182 |
\if@paper |
| 1183 |
\newcommand{\titsubinfo}[3]{ |
| 1184 |
\renewcommand{\defaulttitle}{% |
| 1185 |
#1\vfill |
| 1186 |
{\Large #2\vfill} |
| 1187 |
\vfill {\normalsize #3\vfill}% |
| 1188 |
} |
| 1189 |
\renewcommand{\currenttitle}{#1}% |
| 1190 |
} |
| 1191 |
\newcommand{\titsub}[2]{ |
| 1192 |
\renewcommand{\defaulttitle}{% |
| 1193 |
#1\vfill |
| 1194 |
{\Large #2\vfill\vfill}% |
| 1195 |
} |
| 1196 |
\renewcommand{\currenttitle}{#1}% |
| 1197 |
} |
| 1198 |
\newcommand{\titinfo}[2]{ |
| 1199 |
\renewcommand{\defaulttitle}{% |
| 1200 |
#1\vfill |
| 1201 |
\vfill {\normalsize #2\vfill}% |
| 1202 |
} |
| 1203 |
\renewcommand{\currenttitle}{#1}% |
| 1204 |
} |
| 1205 |
\else |
| 1206 |
\newcommand{\titsubinfo}[3]{ |
| 1207 |
\renewcommand{\defaulttitle}{#1\\[0.8ex] |
| 1208 |
{\Large #2\\[0.8ex]} |
| 1209 |
{\normalsize #3\\}% |
| 1210 |
} |
| 1211 |
\renewcommand{\currenttitle}{#1}% |
| 1212 |
} |
| 1213 |
\newcommand{\titsub}[2]{ |
| 1214 |
\renewcommand{\defaulttitle}{#1\\[0.8ex] |
| 1215 |
{\Large #2\\[0.8ex]}% |
| 1216 |
} |
| 1217 |
\renewcommand{\currenttitle}{#1}% |
| 1218 |
} |
| 1219 |
\newcommand{\titinfo}[2]{ |
| 1220 |
\renewcommand{\defaulttitle}{#1\\[0.8ex] |
| 1221 |
{\normalsize #2\\}% |
| 1222 |
} |
| 1223 |
\renewcommand{\currenttitle}{#1}% |
| 1224 |
} |
| 1225 |
\fi |
| 1226 |
% \end{macrocode} |
| 1227 |
% \descCom{autinfo\arg{author}\arg{address}\arg{email}\arg{homepage}} |
| 1228 |
% Should be used in the premable -- |
| 1229 |
% call |\tit|, |\titaut| or |\titautver| in the document body. |
| 1230 |
% Specifies information about the author (name, address, mail-address and |
| 1231 |
% homepage). Use |\autdiv| resp. |\autinfodiv| instead of |\\|. |
| 1232 |
% \begin{macrocode} |
| 1233 |
\newcommand{\autinfo}[4]{% |
| 1234 |
\renewcommand{\defaultauthor}{#1} |
| 1235 |
\renewcommand{\defaultaddress}{#2} |
| 1236 |
\renewcommand{\defaultemail}{#3} |
| 1237 |
\renewcommand{\defaulthomepage}{#4} |
| 1238 |
\renewcommand{\currentauthor}{#1} |
| 1239 |
} |
| 1240 |
% \end{macrocode} |
| 1241 |
% \descCom{abs\oarg{other-language abstract}\arg{abstract}} |
| 1242 |
% Should be used in the premable -- |
| 1243 |
% call |\tit|, |\titaut| or |\titautver| in the document body. |
| 1244 |
% Prints an abstract text. Optionally an additional abstract in another |
| 1245 |
% language is printed below. The title of the other-language abstract |
| 1246 |
% may be changed by redefining |\otherabstractname|. By default |
| 1247 |
% \q{\otherabstractname} is used (German). |
| 1248 |
% \begin{macrocode} |
| 1249 |
\newcommand{\abstext}{} |
| 1250 |
\newcommand{\otherabstext}{} |
| 1251 |
\newcommand{\abs}[2][]{% |
| 1252 |
\renewcommand{\otherabstext}{#1} |
| 1253 |
\renewcommand{\abstext}{#2} |
| 1254 |
} |
| 1255 |
% \end{macrocode} |
| 1256 |
% \descCom{keywords\arg{keywords}} |
| 1257 |
% Should be used in the premable -- |
| 1258 |
% call |\tit|, |\titaut| or |\titautver| in the document body. |
| 1259 |
% Prints a list of keywords. |
| 1260 |
% \begin{macrocode} |
| 1261 |
\newcommand{\keywordstext}{} |
| 1262 |
\newcommand{\keywords}[1]{% |
| 1263 |
\renewcommand{\keywordstext}{#1} |
| 1264 |
} |
| 1265 |
% \end{macrocode} |
| 1266 |
% \descCom{hyperinfo\arg{title}\arg{author}\arg{abstract}\arg{keywords}} |
| 1267 |
% An alternative way to specify document information for the PDF version. |
| 1268 |
% Use when the default document information extracted from |
| 1269 |
% |\tit[sub][info]|, |\autinfo|, |
| 1270 |
% |\abs| and |\keywords| does not work as it should. |
| 1271 |
% If one of the parameters is left empty the default information |
| 1272 |
% is used instead. |
| 1273 |
% Do not use any formatting or special commands. |
| 1274 |
% Must be used in the premable. Without the |pdf| option this command |
| 1275 |
% is ignored. |
| 1276 |
% \begin{macrocode} |
| 1277 |
\if@pdf |
| 1278 |
\newcommand{\hyperinfo}[4]{ |
| 1279 |
\renewcommand{\hypertitle}{#1} |
| 1280 |
\renewcommand{\hyperauthor}{#2} |
| 1281 |
\renewcommand{\hyperabstract}{#3} |
| 1282 |
\renewcommand{\hyperkeywords}{#4} |
| 1283 |
} |
| 1284 |
\else |
| 1285 |
\newcommand{\hyperinfo}[4]{} |
| 1286 |
\fi |
| 1287 |
% \end{macrocode} |
| 1288 |
% \descCom{titaut\oarg{date}\arg{title}\arg{author}} |
| 1289 |
% Replacement for: |
| 1290 |
% |\title|\arg{title} |
| 1291 |
% |\author|\arg{author} |
| 1292 |
% |\date|\arg{date} |
| 1293 |
% |\maketitle|\\ |
| 1294 |
% Default date is |\today|. With the |paper| option, a titlepage and |
| 1295 |
% a table of contents are generated. |
| 1296 |
% \begin{macrocode} |
| 1297 |
\if@paper |
| 1298 |
\newcommand{\titaut}[3][\today]{% |
| 1299 |
%<hcart|hcreport> \if@wide \linespread{1} \fi |
| 1300 |
%<hcslides> \slidepagestyle{empty}\setcounter{slide}{0} |
| 1301 |
\ifthenelse{\equal{#2}{}} |
| 1302 |
{} |
| 1303 |
{\renewcommand{\defaulttitle}{#2} |
| 1304 |
\renewcommand{\currenttitle}{#2}} |
| 1305 |
\title{\normalfont\huge \defaulttitle \vfill} |
| 1306 |
\ifthenelse{\equal{#3}{}} |
| 1307 |
{} |
| 1308 |
{\renewcommand{\defaultauthor}{#3} |
| 1309 |
\renewcommand{\currentauthor}{#3}} |
| 1310 |
\author{\normalfont\Large \defaultauthor\\[0.8ex] |
| 1311 |
\normalfont\normalsize \defaultaddress\\[0.4ex] |
| 1312 |
\normalfont\normalsize |
| 1313 |
\htmladdnormallink{\defaultemail}{mailto:\defaultemail}\\[-1ex] |
| 1314 |
\normalfont\normalsize |
| 1315 |
\htmladdnormallink{\defaulthomepage}{\defaulthomepage} |
| 1316 |
} |
| 1317 |
\date{\vfill\vfill \normalfont\normalsize #1} |
| 1318 |
%<hcreport> \lowertitleback{% |
| 1319 |
%<hcreport> \ifthenelse{\equal{\otherabstext}{}}{}% |
| 1320 |
%<hcreport> {\minisec{\centering\abstractname} |
| 1321 |
%<hcreport> \abstext}% |
| 1322 |
%<hcreport> \ifthenelse{\equal{\otherabstext}{}}{}% |
| 1323 |
%<hcreport> {\minisec{\centering\otherabstractname} |
| 1324 |
%<hcreport> \otherabstext}% |
| 1325 |
%<hcreport> \ifthenelse{\equal{\keywordstext}{}}{}% |
| 1326 |
%<hcreport> {\minisec{\centering\keywordsname} |
| 1327 |
%<hcreport> \cen{\keywordstext}}% |
| 1328 |
%<hcreport> } |
| 1329 |
\maketitle |
| 1330 |
\ifthenelse{\isundefined{\currentdate}} |
| 1331 |
{\newcommand{\currentdate}{#1}}{} |
| 1332 |
%<hcart|hcslides> \setcounter{page}{0} |
| 1333 |
%<hcart|hcslides> \thispagestyle{empty} |
| 1334 |
%<hcart|hcslides> \ifthenelse{\equal{\abstext}{}}{% |
| 1335 |
%<hcart|hcslides> \ifthenelse{\equal{\keywordstext}{}}{}{ |
| 1336 |
%<hcart|hcslides> \vfill\vfill |
| 1337 |
%<hcart|hcslides> \minisec{\centering\keywordsname} |
| 1338 |
%<hcart|hcslides> \cen{\keywordstext}} |
| 1339 |
%<hcart|hcslides> }{% |
| 1340 |
%<hcart|hcslides> \vfill\vfill |
| 1341 |
%<hcart|hcslides> \minisec{\centering\abstractname} |
| 1342 |
%<hcart|hcslides> \abstext |
| 1343 |
%<hcart|hcslides> \ifthenelse{\equal{\otherabstext}{}}{} |
| 1344 |
%<hcart|hcslides> {\minisec{\centering\otherabstractname} |
| 1345 |
%<hcart|hcslides> \otherabstext} |
| 1346 |
%<hcart|hcslides> \ifthenelse{\equal{\keywordstext}{}}{} |
| 1347 |
%<hcart|hcslides> {\minisec{\centering\keywordsname} |
| 1348 |
%<hcart|hcslides> \cen{\keywordstext}} |
| 1349 |
%<hcart|hcslides> } |
| 1350 |
\setcounter{page}{0} |
| 1351 |
\thispagestyle{empty} |
| 1352 |
\@toc% |
| 1353 |
%<hcart|hcreport> \if@wide \linespread{1.3} \fi |
| 1354 |
%<hcslides> \slidepagestyle{HC}% |
| 1355 |
} |
| 1356 |
\else |
| 1357 |
\newcommand{\titaut}[3][\today]{% |
| 1358 |
%<hcart|hcreport> \if@wide \linespread{1} \fi |
| 1359 |
%<hcslides> \slidepagestyle{empty}\setcounter{slide}{0} |
| 1360 |
\ifthenelse{\equal{#2}{}} |
| 1361 |
{} |
| 1362 |
{\renewcommand{\defaulttitle}{#2} |
| 1363 |
\renewcommand{\currenttitle}{#2}} |
| 1364 |
\title{\normalfont\huge \defaulttitle} |
| 1365 |
\ifthenelse{\equal{#3}{}} |
| 1366 |
{} |
| 1367 |
{\renewcommand{\defaultauthor}{#3} |
| 1368 |
\renewcommand{\currentauthor}{#3}} |
| 1369 |
\author{\normalfont\Large \defaultauthor} |
| 1370 |
\date{\normalfont\normalsize #1} |
| 1371 |
%<hcreport> \lowertitleback{% |
| 1372 |
%<hcreport> \ifthenelse{\equal{\otherabstext}{}}{}% |
| 1373 |
%<hcreport> {\minisec{\centering\abstractname} |
| 1374 |
%<hcreport> \abstext}% |
| 1375 |
%<hcreport> \ifthenelse{\equal{\otherabstext}{}}{}% |
| 1376 |
%<hcreport> {\minisec{\centering\otherabstractname} |
| 1377 |
%<hcreport> \otherabstext}% |
| 1378 |
%<hcreport> \ifthenelse{\equal{\keywordstext}{}}{}% |
| 1379 |
%<hcreport> {\minisec{\centering\keywordsname} |
| 1380 |
%<hcreport> \cen{\keywordstext}}% |
| 1381 |
%<hcreport> } |
| 1382 |
\maketitle |
| 1383 |
\ifthenelse{\isundefined{\currentdate}} |
| 1384 |
{\newcommand{\currentdate}{#1}}{} |
| 1385 |
%<hcart|hcslides> \setcounter{page}{0} |
| 1386 |
%<hcart|hcslides> \thispagestyle{empty} |
| 1387 |
%<hcart|hcslides> \ifthenelse{\equal{\abstext}{}}{}{ |
| 1388 |
%<hcart|hcslides> \minisec{\centering\abstractname} |
| 1389 |
%<hcart|hcslides> \abstext |
| 1390 |
%<hcart|hcslides> \ifthenelse{\equal{\otherabstext}{}}{} |
| 1391 |
%<hcart|hcslides> {\minisec{\centering\otherabstractname} |
| 1392 |
%<hcart|hcslides> \otherabstext} |
| 1393 |
%<hcart|hcslides> } |
| 1394 |
%<hcart|hcslides> \ifthenelse{\equal{\keywordstext}{}}{} |
| 1395 |
%<hcart|hcslides> {\minisec{\centering\keywordsname} |
| 1396 |
%<hcart|hcslides> \cen{\keywordstext}} |
| 1397 |
\setcounter{page}{0} |
| 1398 |
\thispagestyle{empty}% |
| 1399 |
%<hcart|hcreport> \if@wide \linespread{1.3} \fi |
| 1400 |
%<hcslides> \newpage\slidepagestyle{HC}% |
| 1401 |
} |
| 1402 |
\fi |
| 1403 |
% \end{macrocode} |
| 1404 |
% \descCom{tit\oarg{date}\arg{title}} |
| 1405 |
% Calls |\titaut| with the default author information. |
| 1406 |
% \begin{macrocode} |
| 1407 |
\newcommand{\tit}[2][\today]{\titaut[#1]{#2}{}} |
| 1408 |
% \end{macrocode} |
| 1409 |
% \descCom{titautver\oarg{version |
| 1410 |
% date}\arg{title}\arg{author}\arg{general date}} |
| 1411 |
% Prints a general date (e.g. of first release) and a version date |
| 1412 |
% (default: |\today|). |
| 1413 |
% \begin{macrocode} |
| 1414 |
\newcommand{\titautver}[4][\today]{ |
| 1415 |
\newcommand{\currentdate}{#1}% |
| 1416 |
\titaut[#4\\\versiontext\ #1]{#2}{#3} |
| 1417 |
} |
| 1418 |
% \end{macrocode} |
| 1419 |
% \descCom{titver\oarg{version date}\arg{title}\arg{general date}} |
| 1420 |
% Calls |\titautver| with the default author information. |
| 1421 |
% \begin{macrocode} |
| 1422 |
\newcommand{\titver}[3][\today]{\titautver[#1]{#2}{}{#3}} |
| 1423 |
% \end{macrocode} |
| 1424 |
% \subsubsection{Sectioning Commands} |
| 1425 |
% \descCom{fictionsec} |
| 1426 |
% A sectioning command producing just a number, no text -- useful e.g. |
| 1427 |
% for fiction without section headings. |
| 1428 |
% When a new |\section| starts the counter is reset. |
| 1429 |
% \begin{macrocode} |
| 1430 |
\newcounter{fictionsec}[section] |
| 1431 |
\newcommand{\fictionsec}{\addtocounter{fictionsec}{1}% |
| 1432 |
\subsection*{\centering\thefictionsec}} |
| 1433 |
%</hcart|hcreport|hcslides> |
| 1434 |
% \end{macrocode} |
| 1435 |
% \subsection{Commands and Environments for the hcart class} |
| 1436 |
% A |\part| command starts a new page. |
| 1437 |
% \begin{macrocode} |
| 1438 |
%<*hcart> |
| 1439 |
\renewcommand\part{\clearpage |
| 1440 |
\@afterindentfalse |
| 1441 |
\secdef\@part\@spart} |
| 1442 |
%</hcart> |
| 1443 |
% \end{macrocode} |
| 1444 |
% \subsection{Settings for the hcletter class} |
| 1445 |
% No fold marks are printed. |
| 1446 |
% \begin{macrocode} |
| 1447 |
%<*hcletter> |
| 1448 |
\foldmarksoff |
| 1449 |
%</hcletter> |
| 1450 |
% \end{macrocode} |
| 1451 |
% \subsection{Commands and Environments for the hcreport class} |
| 1452 |
% The first page of a chapter and the title page of a part do not |
| 1453 |
% have a page number. |
| 1454 |
% \begin{macrocode} |
| 1455 |
%<*hcreport> |
| 1456 |
\renewcommand\chapter |
| 1457 |
{\if@openright\cleardoublepage\else\clearpage\fi |
| 1458 |
\thispagestyle{empty}% |
| 1459 |
\global\@topnum\z@ |
| 1460 |
\@afterindentfalse |
| 1461 |
\secdef\@chapter\@schapter} |
| 1462 |
\renewcommand\addchap |
| 1463 |
{\if@openright\cleardoublepage\else\clearpage\fi |
| 1464 |
\thispagestyle{empty}% |
| 1465 |
\global\@topnum\z@ |
| 1466 |
\@afterindentfalse |
| 1467 |
\secdef\@addchap\@saddchap} |
| 1468 |
\renewcommand\part |
| 1469 |
{\if@openright\cleardoublepage\else\clearpage\fi |
| 1470 |
\thispagestyle{empty}% |
| 1471 |
\if@twocolumn |
| 1472 |
\onecolumn |
| 1473 |
\@tempswatrue |
| 1474 |
\else |
| 1475 |
\@tempswafalse |
| 1476 |
\fi |
| 1477 |
\null\vfil |
| 1478 |
\secdef\@part\@spart} |
| 1479 |
%</hcreport> |
| 1480 |
% \end{macrocode} |
| 1481 |
% \subsection{Commands and Environments for the hcslides class} |
| 1482 |
% A new page is started by a section or manually with the |\newslide| |
| 1483 |
% command. |
| 1484 |
% |
| 1485 |
% Everything is printed sans serif. |
| 1486 |
% The |HC| pagestyle is always used. |
| 1487 |
% The |fancybox| package is required for drawing an shadowed box around |
| 1488 |
% sections. |
| 1489 |
% \descCom{addsec\oarg{toc-entry}\arg{heading}} |
| 1490 |
% For compatibily with the |hcart| and |hcreport| classes. |
| 1491 |
% Should always be used instead of the |\section*| command. |
| 1492 |
% \descCom{minisec\arg{heading}} |
| 1493 |
% For compatibily with the |hcart| and |hcreport| classes. |
| 1494 |
% Sectioning level between |\subsubsection| and |\paragraph|. |
| 1495 |
% \begin{macrocode} |
| 1496 |
%<*hcslides> |
| 1497 |
\AtBeginDocument{\begin{slide}} |
| 1498 |
\AtEndDocument{\end{slide}} |
| 1499 |
\renewcommand{\rmdefault}{\sfdefault} |
| 1500 |
\raggedslides[5em] |
| 1501 |
\newcommand{\addsec}[2][]{% |
| 1502 |
\section*{#2} |
| 1503 |
\ifthenelse{\equal{#1}{}} |
| 1504 |
{\addcontentsline{toc}{section}{#2}} |
| 1505 |
{\addcontentsline{toc}{section}{#1}}% |
| 1506 |
} |
| 1507 |
\newcommand\minisec[1]{\@afterindentfalse \vskip 1.5ex |
| 1508 |
{\parindent \z@ \raggedright\sffamily\bfseries #1\par\nobreak}% |
| 1509 |
\@afterheading} |
| 1510 |
\setlength{\slideheight}{0.74\paperwidth} |
| 1511 |
\setlength{\slidewidth}{0.84\paperheight} |
| 1512 |
\renewcommand{\slidetopmargin}{0.12\paperwidth} |
| 1513 |
\renewcommand{\slidebottommargin}{0.12\paperwidth} |
| 1514 |
\renewcommand{\slideleftmargin}{0.08\paperheight} |
| 1515 |
\renewcommand{\sliderightmargin}{0.08\paperheight} |
| 1516 |
\slideframe{none} |
| 1517 |
\AtBeginDocument{ |
| 1518 |
\ifthenelse{\equal{\defaultemail}{}} |
| 1519 |
{\newcommand{\@email}{}} |
| 1520 |
{\newcommand{\@email} |
| 1521 |
{ \texttt{<}\htmail{\defaultemail}\texttt{>}}} |
| 1522 |
\newpagestyle{HC}% |
| 1523 |
{\parbox[b]{\textwidth}% |
| 1524 |
{\currenttitle\hfill\currentdate\\[-.6ex]% |
| 1525 |
\rule{\textwidth}{0.6pt}}} |
| 1526 |
{\parbox[t]{\textwidth}{\rule{\textwidth}{0.6pt}\\[.6ex]% |
| 1527 |
\renewcommand{\autdiv}{, }% |
| 1528 |
\currentauthor\@email\hfill\thepage}} |
| 1529 |
\pagestyle{HC} |
| 1530 |
} |
| 1531 |
\RequirePackage{fancybox} |
| 1532 |
\setcounter{tocdepth}{3} |
| 1533 |
\renewcommand\section{\@startsection {section}{1}{\z@}% |
| 1534 |
{-3.5ex \@plus -1ex \@minus -.2ex}% |
| 1535 |
{2.3ex \@plus.2ex}% |
| 1536 |
{\newslide\normalfont\Large\bfseries\shadowbox}} |
| 1537 |
\renewcommand\part{\clearpage |
| 1538 |
\if@twocolumn |
| 1539 |
\onecolumn |
| 1540 |
\@tempswatrue |
| 1541 |
\else |
| 1542 |
\@tempswafalse |
| 1543 |
\fi |
| 1544 |
\secdef\@part\@spart} |
| 1545 |
% \end{macrocode} |
| 1546 |
% \subsubsection{The twotoc option} |
| 1547 |
% \begin{macrocode} |
| 1548 |
\if@twotoc |
| 1549 |
\RequirePackage{multicol} |
| 1550 |
\renewcommand*\tableofcontents{% |
| 1551 |
\newlength{\old@columnseprule} |
| 1552 |
\setlength{\old@columnseprule}{\columnseprule} |
| 1553 |
\setlength{\columnseprule}{0.4pt} |
| 1554 |
\begin{multicols}{2}[\section*{\contentsname}] |
| 1555 |
\@starttoc{toc}% |
| 1556 |
\end{multicols} |
| 1557 |
\setlength{\columnseprule}{\old@columnseprule} |
| 1558 |
} |
| 1559 |
\fi |
| 1560 |
%</hcslides> |
| 1561 |
% \end{macrocode} |
| 1562 |
% \section{German Language Definitions} |
| 1563 |
% The |babel| package is loaded with the new German orthograpy (option |
| 1564 |
% |ngerman|: this requires a rather new version of |babel|). The commands |
| 1565 |
% |\q|, |\hq|, |\dash|, |\Es| and |\shorttoday| |
| 1566 |
% are adapted to the German typography. The |\enge| command is redefined. |
| 1567 |
% The German \BibTeX\ style |hc-de| is used by default. |
| 1568 |
% The language specific texts are redefined. The German redefinitions of the |
| 1569 |
% |varioref| package do not seem to work, so the are repeated. |
| 1570 |
% \begin{macrocode} |
| 1571 |
%<*german> |
| 1572 |
\addto{\captionsngerman}{% |
| 1573 |
\renewcommand{\nextstartq}{\guillemotright} |
| 1574 |
\renewcommand{\nextendq}{\guillemotleft} |
| 1575 |
\renewcommand{\otherstartq}{\guilsinglright} |
| 1576 |
\renewcommand{\otherendq}{\guilsinglleft} |
| 1577 |
\renewcommand{\hq}[1]{\guilsinglright{}#1\guilsinglleft{}} |
| 1578 |
\renewcommand{\fq}[1]{\guillemotright{}#1\guillemotleft{}} |
| 1579 |
\renewcommand{\dash}[1]{--~#1~--} |
| 1580 |
\renewcommand{\shorttoday} |
| 1581 |
{\the\day.\the\month.\two@digits{\theshortyear}\xspace} |
| 1582 |
\renewcommand{\enge}[2]{#2} |
| 1583 |
\renewcommand{\bibliostyle}{hc-de} |
| 1584 |
\renewcommand{\contentsname}{Inhalt} |
| 1585 |
\renewcommand{\versiontext}{Version vom} |
| 1586 |
\renewcommand{\accesstext}{Zugriff am} |
| 1587 |
\renewcommand{\cftext}{vgl.} |
| 1588 |
\renewcommand{\bibvoltext}{der} |
| 1589 |
\renewcommand{\bvtext}{Bd.} |
| 1590 |
\renewcommand{\bibdir}{Regie } |
| 1591 |
\renewcommand{\bibmovtext}{Spielfilm} |
| 1592 |
\renewcommand{\bibactorsbefore}{Mit} |
| 1593 |
\renewcommand{\bibactorsafter}{u.a} |
| 1594 |
\renewcommand{\noyear}{o.J.} |
| 1595 |
\renewcommand{\noaddress}{o.O.} |
| 1596 |
\renewcommand{\otherabstractname}{Abstract} |
| 1597 |
\renewcommand{\keywordsname}{Schl\"usselw\"orter} |
| 1598 |
\renewcommand{\seetext}{siehe} |
| 1599 |
} |
| 1600 |
\if@euro |
| 1601 |
\addto{\captionsngerman}{% |
| 1602 |
\renewcommand{\Es}[1]{#1\nobreak\,\E} |
| 1603 |
} |
| 1604 |
\fi |
| 1605 |
\if@fancyref |
| 1606 |
\def\reftextfaceafter {auf der n\"achsten Seite}% |
| 1607 |
\def\reftextfacebefore{auf der vorherigen Seite}% |
| 1608 |
\let\reftextafter \reftextfaceafter |
| 1609 |
\let\reftextbefore \reftextfacebefore |
| 1610 |
\def\reftextcurrent {auf dieser Seite}% |
| 1611 |
\def\reftextfaraway#1{auf Seite~\pageref{#1}}% |
| 1612 |
\def\reftextpagerange#1#2{auf |
| 1613 |
Seiten~\pageref{#1}--\pageref{#2}}% |
| 1614 |
\def\reftextlabelrange#1#2{\ref{#1} bis~\ref{#2}}% |
| 1615 |
\fi |
| 1616 |
%</german> |
| 1617 |
% \end{macrocode} |
| 1618 |
% |
| 1619 |
% \StopEventually |
| 1620 |
% \Finale |
| 1621 |
% |
| 1622 |
\endinput |
| 1623 |
% |
| 1624 |
% End of File `hc.dtx' |