Debian Codegraph @

texmf-dist/source/latex/fullblck/fullblck.dtx

raw
1 % \iffalse
2 %% File: fullblck.dtx Copyright 1998,1999 James H. Cloos, Jr. <[email protected]>
3 %
4 %<*preamble>
5 %
6 % (1) If you do not already have 'fullblck.ins'
7 % run 'fullblck.dtx' through LaTeX to create it.
8 %
9 % Now run 'fullblck.ins' through (La)TeX to get the package.
10 %
11 % [Or use 'docstrip' and extract 'fullblck.sty' from 'fullblck.dtx'
12 % using option 'package']
13 %
14 % (2) Then run 'fullblck.dtx' three times thought LaTeX
15 % to get the documentation 'fullblck.dvi'.
16 %
17 %
18 %
19 %%% ====================================================================
20 %%% @LaTeX-package-file{
21 %%% author = "James H. Cloos, Jr.",
22 %%% version = "1.03",
23 %%% date = "1999/May/25",
24 %%% time = "22:30:00 UTC",
25 %%% filename = "fullblck.dtx",
26 %%% address = "James H. Cloos, Jr.
27 %%% 6607 Brodie Ln #414
28 %%% Austin, TX 78745-4650
29 %%% US",
30 %%% telephone = "+1 888.612.7791",
31 %%% FAX = "+1 888.612.7791",
32 %%% email = "[email protected]",
33 %%% codetable = "ISO/ASCII",
34 %%% keywords = "letter, fullblock",
35 %%% supported = "yes",
36 %%% abstract = "This package defines commands for using
37 %%% standard SI units in all your texts. The
38 %%% package provides different options for the
39 %%% spacing of the units.",
40 %%% docstring = "This is based heavily on LaTeX2e's letter.dtx, which is:
41 %%% Copyright 1993 1994 1995 1996 1997 The LaTeX3 Project
42 %%% and any individual authors listed in letter.dtx.
43 %%% My modifications are Copyright 1998,1999 James H. Cloos, Jr.
44 %%% All rights reserved.",
45 %%% }
46 %%% ====================================================================
47 %
48 %
49 % IMPORTANT COPYRIGHT NOTICE:
50 %
51 % This package is based on letter.dtx from LaTeX2e and may be used and
52 % distributed under the same terms as LaTeX2e.
53 %
54 %</preamble>
55 %
56 %
57 %<*batchfile>
58 \begin{filecontents}{fullblck.ins}
59 \def\batchfile{fullblck.ins}
60 \input docstrip.tex
61 \keepsilent
62 \generate{\file{fullblck.sty}{\from{fullblck.dtx}{package}}}
63 \endbatchfile
64 \end{filecontents}
65 %</batchfile>
66 %
67 %<*driver>
68 \def\fileversion{1.03}
69 \def\filedate{1999/May/25}
70 \documentclass{ltxdoc}
71 %
72 \begin{document}
73 \DocInput{fullblck.dtx}
74 \end{document}
75 %</driver>
76 % \fi
77 %
78 %
79 % \CheckSum{0}
80 % \CharacterTable
81 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
82 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
83 % Digits \0\1\2\3\4\5\6\7\8\9
84 % Exclamation \! Double quote \" Hash (number) \#
85 % Dollar \$ Percent \% Ampersand \&
86 % Acute accent \' Left paren \( Right paren \)
87 % Asterisk \* Plus \+ Comma \,
88 % Minus \- Point \. Solidus \/
89 % Colon \: Semicolon \; Less than \<
90 % Equals \= Greater than \> Question mark \?
91 % Commercial at \@ Left bracket \[ Backslash \\
92 % Right bracket \] Circumflex \^ Underscore \_
93 % Grave accent \` Left brace \{ Vertical bar \|
94 % Right brace \} Tilde \~}
95 %
96 %
97 %
98 % \title{The \texttt{fullblck} package\thanks{This file
99 % has version number \fileversion, last revised \filedate.}}
100 %
101 % \author{James H. Cloos, Jr.}
102 % \date{1998/November/24}
103 % \maketitle
104 %
105 %
106 % \changes{v1.1}{1998/11/17}{Initial version.}%
107 % \changes{v1.2}{1998/11/24}{Coverted to \textsc{dtx} file.}%
108 %
109 % \begin{abstract}
110 % This article describes the \texttt{fullblck} package which modifies
111 % the \texttt{letter} class to use a full block layout.
112 % Specifically, this means that the return address,
113 % date and closing will be set at the left margin.
114 % \end{abstract}
115 %
116 % \section{Introduction}
117 % In the US, there are three common layouts used for business letters.
118 % \LaTeX2e's \texttt{letter} class implements the indented layout.
119 % This package modifies
120 % \LaTeX2e's \texttt{letter} class to set the letter in the fullblock
121 % layout. No attempt is made to support the semi-block layout.
122 %
123 %
124 % \section{How to use the package}
125 %
126 % Add \texttt{\char92usepackage\{fullblck\}} to the preamble of your letter.
127 % No options are required or supported, and no new commands are defined.
128 %
129 % \section{The implementation}
130 %
131 % First, the basic boilerplate for a \textsc{sty} file:
132 %
133 % \begin{macrocode}
134 %<*package>
135 \NeedsTeXFormat{LaTeX2e}[1996/06/01]
136 \ProvidesPackage{fullblck}
137 [1998/11/17 v1.1 JHCloos FullBlock Style for Letters]
138 % \end{macrocode}
139 %
140 % Now we set the \texttt{\char92longindentation} to zero;
141 % this puts the closing at the left margin.
142 %
143 % \begin{macrocode}
144 \longindentation=0pt%
145 % \end{macrocode}
146 %
147 % Finally we redefine \texttt{\char92opening} to just dump the return
148 % address and date at the left margin in \texttt{\char92raggedright}
149 % mode.
150 %
151 % \begin{macrocode}
152 \renewcommand*{\opening}[1]{\ifx\@empty\fromaddress
153 \thispagestyle{firstpage}%
154 {\raggedright\@date\par}%
155 \else % home address
156 \thispagestyle{empty}%
157 {\raggedright\ignorespaces
158 \fromaddress \\*[2\parskip]%
159 \@date \par}%
160 \fi
161 \vspace{2\parskip}%
162 {\raggedright \toname \\ \toaddress \par}%
163 \vspace{2\parskip}%
164 #1\par\nobreak}
165 %</package>
166 % \end{macrocode}
167 %
168 %
169 % \Finale
170