Debian Codegraph @

texmf-dist/source/latex/fixdif/fixdif.dtx

raw
1 % \iffalse meta-comment
2 %
3 % Copyright (C) 2022-2023 by Zhang Tingxuan <[email protected]>
4 %
5 % This work may be distributed and/or modified under the
6 % conditions of the LaTeX Project Public License, either
7 % version 1.3c of this license or (at your option) any later
8 % version. The latest version of this license is in:
9 %
10 % http://www.latex-project.org/lppl.txt
11 %
12 % and version 1.3 or later is part of all distributions of
13 % LaTeX version 2005/12/01 or later.
14 %
15 % This work has the LPPL maintenance status `maintained'.
16 %
17 % The Current Maintainer of this work is Zhang Tingxuan.
18 %
19 % This work consists of the files fixdif.dtx,
20 % and the derived files fixdif.ins,
21 % fixdif.sty,
22 % fixdif.pdf,
23 % and README.md.
24 %
25 %<*internal>
26 \iffalse
27 %</internal>
28 %
29 %<*readme>
30 # The `fixdif` Package
31
32 The `fixdif` package provides an interface for defining the style of differential operators.
33
34 The basic commands are:
35
36 - `\d`: for differential operator "d" in math mode and under-dot accent in text;
37 - `\partial`: a "fixed" partial differential operator command;
38 - `\letdif`: an interface for defining new commands for differential operators;
39 - `\mathdif`: a commmand in math mode, you can use it just like `\mathop`, etc.
40
41 See `fixdif.pdf` for more. Happy TeXing!
42
43 ## License
44
45 This work may be distributed and/or modified under the conditions of
46 the [LaTeX Project Public License](http://www.latex-project.org/lppl.txt),
47 either version 1.3c of this license or (at your option) any later version.
48
49 ------
50
51 Copyright (C) 2022-2023 by Zhang Tingxuan <[email protected]>.
52 %</readme>
53 %
54 %<*internal>
55 \fi
56 \begingroup
57 \def\NameOfLaTeXe{LaTeX2e}
58 \expandafter\endgroup\ifx\NameOfLaTeXe\fmtname\else
59 \csname fi\endcsname
60 %</internal>
61 %
62 %<*install>
63 \input docstrip.tex
64 \keepsilent
65
66 \preamble
67
68 Copyright (C) 2022-2023 by Zhang Tingxuan <[email protected]>
69
70 This work may be distributed and/or modified under the
71 conditions of the LaTeX Project Public License, either
72 version 1.3c of this license or (at your option) any later
73 version. The latest version of this license is in:
74
75 http://www.latex-project.org/lppl.txt
76
77 and version 1.3 or later is part of all distributions of
78 LaTeX version 2005/12/01 or later.
79
80 This work has the LPPL maintenance status `maintained'.
81
82 The Current Maintainer of this work is Zhang Tingxuan.
83
84 This work consists of the files fixdif.dtx,
85 and the derived files fixdif.ins,
86 fixdif.sty,
87 fixdif.pdf,
88 and README.md.
89
90 \endpreamble
91
92 \generate{
93 \usedir{tex/latex/fixdif}
94 \file{\jobname.sty} {\from{\jobname.dtx}{package}}
95 %</install>
96 %<*internal>
97 \usedir{source/latex/fixdif}
98 \file{\jobname.ins} {\from{\jobname.dtx}{install}}
99 %</internal>
100 %<*install>
101 \usedir{doc/latex/fixdif}
102 \nopreamble\nopostamble
103 \file{README.md} {\from{\jobname.dtx}{readme}}
104 }
105
106 \obeyspaces
107 \Msg{****************************************************}
108 \Msg{* *}
109 \Msg{* To finish the installation you have to move the *}
110 \Msg{* following file into a directory searched by TeX: *}
111 \Msg{* *}
112 \Msg{* fixdif.sty *}
113 \Msg{* *}
114 \Msg{* The recommended directory is *}
115 \Msg{* TDS:tex/latex/fixdif *}
116 \Msg{* *}
117 \Msg{* To produce the documentation run the file *}
118 \Msg{* fixdif.dtx through pdfLaTeX/XeLaTeX/LuaLaTeX. *}
119 \Msg{* XeLaTeX and LuaLaTeX are recommended if you *}
120 \Msg{* hope the PDF file to be smaller. *}
121 \Msg{* *}
122 \Msg{* Happy TeXing! *}
123 \Msg{* *}
124 \Msg{****************************************************}
125
126 \endbatchfile
127 %</install>
128 %
129 %<*internal>
130 \fi
131 %</internal>
132 %
133 %<*driver>
134 \ProvidesFile{fixdif.dtx}[2023/03/20 (c) Copyright 2022-2023 by Zhang Tingxuan]
135 \documentclass{ltxdoc}
136 \usepackage{xcolor}
137 \definecolor{titlecolor}{RGB}{0,12,160}
138 \usepackage{doc}
139 \usepackage{fancyvrb}
140 \fvset{xleftmargin=2.5em,fontsize=\small,gobble=2}
141 \MakeShortVerb|
142 \usepackage{hologo}
143 \def\XeTeX{\hologo{XeTeX}}
144 \def\LuaTeX{\hologo{LuaTeX}}
145 \def\pkg{\textsf}
146 \def\opt{\texttt}
147 \title{The \pkg{fixdif} Package}
148 \author{Zhang Tingxuan}
149 \date{2023/03/20\quad Version 2.1\thanks{\url{https://github.com/AlphaZTX/fixdif}}}
150 \usepackage{hyperref}
151 \hypersetup{
152 pdftitle = {The fixdif Package},
153 pdfauthor = {Zhang Tingxuan},
154 pdfcreator = {pdfLaTeX/XeLaTeX/LuaLaTeX},
155 linkcolor = black,
156 urlcolor = titlecolor!80!black,
157 }
158 \def\pkg{\textsf}
159 \makeatletter
160 \renewcommand\section{\@startsection{section}{1}{\z@}%
161 {-2.5ex plus -1ex minus -.2ex}%
162 {1ex plus .2ex}%
163 {\normalfont\Large\bfseries\color{titlecolor}}}
164 \renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
165 {-2ex plus -1ex minus -.2ex}%
166 {.5ex plus .2ex}%
167 {\normalfont\normalsize\bfseries\color{titlecolor}}}
168 \renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
169 {.8ex plus .4ex minus .2ex}%
170 {-1em}%
171 {\normalfont\normalsize\bfseries\color{titlecolor}}}
172 \def\UrlAlphabet{%
173 \do\a\do\b\do\c\do\d\do\e\do\f\do\g\do\h\do\i\do\j%
174 \do\k\do\l\do\m\do\n\do\o\do\p\do\q\do\r\do\s\do\t%
175 \do\u\do\v\do\w\do\x\do\y\do\z\do\A\do\B\do\C\do\D%
176 \do\E\do\F\do\G\do\H\do\I\do\J\do\K\do\L\do\M\do\N%
177 \do\O\do\P\do\Q\do\R\do\S\do\T\do\U\do\V\do\W\do\X%
178 \do\Y\do\Z}
179 \def\UrlDigits{\do\1\do\2\do\3\do\4\do\5\do\6\do\7\do\8\do\9\do\0}
180 \g@addto@macro{\UrlBreaks}{\UrlOrds}
181 \g@addto@macro{\UrlBreaks}{\UrlAlphabet}
182 \g@addto@macro{\UrlBreaks}{\UrlDigits}
183 \ifdefined\Umathcode
184 \usepackage{unicode-math}
185 \fi
186 \makeatother
187 \usepackage{fixdif}
188 \linespread{1.05}
189 \parskip6pt plus 2pt minus 1pt
190 \parindent2.5em
191 \begin{document}
192 \DocInput{\jobname.dtx}
193 \end{document}
194 %</driver>
195 % \fi
196 %
197 % \maketitle
198 %
199 % \begin{abstract}
200 % The \pkg{fixdif} package redefines the \cs{d} command in \LaTeX\ and
201 % provides an interface to define commands for differential operators.
202 %
203 % The package does well with pdf\TeX, \XeTeX\ and \LuaTeX, only works
204 % with \LaTeX\ format. Furthermore, this package is compatible with
205 % \pkg{unicode-math} package in \XeTeX\ and \LuaTeX.
206 % \end{abstract}
207 %
208 % {\parskip1pt plus 1pt\tableofcontents}
209 %
210 % \section{The background}
211 % It's usually recommended that a small skip should be reserved between
212 % the differential operator and the expression before it\footnote{See
213 % \url{https://tex.stackexchange.com/questions/14821/whats-the-proper-way-to-typeset-a-differential-operator}.}.
214 % Take the following line as an example:
215 % \[f(x)\mathrm{d}x\qquad\hbox{and}\qquad f(x)\d x.\]
216 % We usually consider that the example on the right side is better than the
217 % one on left side. The small skip between $f(x)$ and $\d x$ can be
218 % regarded as a binary operator.
219 %
220 % Some users prefer to define a macro like this:
221 % \begin{Verbatim}
222 % \renewcommand\d{\mathop{\mathrm{d}}\!}
223 % \end{Verbatim}
224 % This macro works well in display math and text math, but still appears with
225 % the following three problems:
226 % \begin{enumerate}
227 % \item The skip before ``$\d$'' still exists before the denominator in
228 % ``text fraction''. This is what we do not hope to see. For example,
229 % |$\d y/\d x$| produces $\mathrm{d}y/\,\mathrm{d}x$.
230 %
231 % \item |\d| is defined as a text accent command in \LaTeXe\ kernel. If we
232 % defined like this, |\d{o}| could not produce ``\d{o}'' in text.
233 %
234 % \item The skip before ``d'' should behave like skips around a binary operator.
235 % It should disappear in script math and script script math. For example,
236 % |$a+b$| yields $a+b$ while |$^{a+b}$| yields $^{a+b}$, the skips around ``$+$''
237 % disappear in superscript. But in the definition above, |$^{f(x)\d x}$|
238 % yields $^{f(x)\,\mathrm{d}x}$ but not $^{f(x)\d x}$.
239 % \end{enumerate}
240 % To solve these problems, you can try this package.
241 %
242 % \section{Introduction}
243 % To load this package, write
244 % \begin{Verbatim}
245 % \usepackage{fixdif}
246 % \end{Verbatim}
247 % in the preamble. \pkg{fixdif} allows you to write this line anywhere in the
248 % preamble since version 2.0. In your document,
249 % \begin{Verbatim}
250 % \[ f(x)\d x,\quad\frac{\d y}{\d x},\quad\d y/\d x,\quad a^{y\d x}. \]
251 % \end{Verbatim}
252 % will produce
253 % \[f(x)\d x,\quad \frac{\d y}{\d x},\quad \d y/\d x,\quad a^{y\d x}.\]
254 %
255 % \subsection{Basic commands and package options}
256 % \DescribeMacro{\d}
257 % The \pkg{fixdif} package provides a \cs{d} command for the differential
258 % operator ``d'' in math mode. When in text, \cs{d} behaves just like
259 % the old \cs{d} command in \LaTeX\ or plain \TeX\ as an accent command.
260 % For example,
261 % \begin{Verbatim}
262 % $\d x$ and \d x
263 % \end{Verbatim}
264 % tields ``$\d x$ and \d x''.
265 %
266 % \paragraph{Set the font of \cs{d}}
267 % There are two package options to control the style of \cs{d} in math mode~---
268 % \opt{rm} and \opt{normal}. The default option is \opt{rm}, in which case
269 % |$f(x)\d x$| produces $f(x)\d x$. If you chose the \opt{normal} option,
270 % that is
271 % \begin{Verbatim}
272 % \usepackage[normal]{fixdif}
273 % \end{Verbatim}
274 % |$f(x)\d x$| yields $f(x)\,dx$.
275 %
276 % \DescribeMacro{\resetdfont}
277 % Regardless of the two options above, you can reset the font of \cs{d}
278 % through \cs{resetdfont} command in preamble:
279 % \begin{Verbatim}
280 % \resetdfont{\mathsf}
281 % \end{Verbatim}
282 % then |$\d x$| yields $\mathsf{d}x$. Notice that the argument of
283 % \cs{resetdfont} should be a command with \emph{one} argument.
284 %
285 % \paragraph{Control the behavior of \cs{partial}}
286 % \DescribeMacro{\partial}
287 % In default, \cs{partial} will be regarded as a differential operator
288 % after you load \pkg{fixdif}. If you don't like this default setting,
289 % you can use the \opt{nopartial} option:
290 % \begin{Verbatim}
291 % \usepackage[nopartial]{fixdif}
292 % \end{Verbatim}
293 % If you choose to use the default settings, \cs{partialnondif} yields
294 % the ordinary symbol ``$\partialnondif$''.
295 %
296 % \section{Define commands for differential operators}
297 % \noindent\emph{Attention! The commands in this section
298 % can be used in preamble only!}
299 %
300 % \subsection{Define commands with a single command name}
301 % \noindent\textcolor{titlecolor}{\cs{letdif}\marg{cmd}\marg{csname}}\DescribeMacro{\letdif}
302 % \hfill(preamble only)
303 %
304 % The \cs{letdif} command takes two arguments~--- the first is the newly-defined
305 % command and the second is the control sequence \emph{name} of a math character,
306 % that is, a command without its backslash. For example,
307 % \begin{Verbatim}
308 % \letdif{\vr}{delta}
309 % \end{Verbatim}
310 % then |\vr| will produce a $\delta$ (|\delta|) with automatic skip
311 % before it.
312 %
313 % Through the \cs{letdif} command, we can redefine a math character command
314 % by its name. For example,
315 % \begin{Verbatim}
316 % \letdif{\delta}{delta}
317 % \end{Verbatim}
318 % then |\delta| itself will be a differential operator.
319 %
320 % The second argument \meta{csname} of \cs{letdif} command can be used
321 % repeatedly. If you want to get the ordinary symbol of
322 % \texttt{\char`\\\textnormal{\meta{csname}}}, you can input
323 % \texttt{\char`\\\textnormal{\meta{csname}}nondif} in math mode.
324 % For example, in default, \DescribeMacro{\partialnondif}\cs{partialnondif}
325 % yields the old partial symbol ``$\partialnondif$''.
326 %
327 % \noindent\textcolor{titlecolor}{\cs{letdif*}\marg{cmd}\marg{csname}}
328 % \hfill(preamble only)
329 %
330 % This command is basically the same as \cs{letdif}, but this command will
331 % patch a correction after the differential operator. This is very useful
332 % when a math font is setted through \pkg{unicode-math} package. For example,
333 % \begin{Verbatim}
334 % \usepackage{unicode-math}
335 % \setmathfont{TeX Gyre Termes Math}
336 % \usepackage{fixdif}
337 % \letdif{\vr}{updelta}
338 % \end{Verbatim}
339 % this will cause bad negative skip after |\vr|, but if you change the last
340 % line into
341 % \begin{Verbatim}
342 % \letdif*{\vr}{updelta}
343 % \end{Verbatim}
344 % you will get the result correct.
345 %
346 % \subsection{Define commands with multi commands or a string}
347 %
348 % \noindent\textcolor{titlecolor}{\cs{newdif}\marg{cmd}\marg{multi-cmd}}\DescribeMacro{\newdif}
349 % \hfill(without correction, preamble only)\\
350 % \noindent\textcolor{titlecolor}{\cs{newdif*}\marg{cmd}\marg{multi-cmd}}
351 % \hfill(with correction, preamble only)
352 %
353 % The first argument of these commands is the newly-defined command; and the
354 % second argument should contain \emph{more than one} tokens.
355 % For example, if you have loaded the \pkg{xcolor} package,
356 % you can use the following line:
357 % \begin{Verbatim}
358 % \newdif{\redsfd}{\textsf{\color{red}d}}
359 % \end{Verbatim}
360 % Then you get the |\redsfd| as a differential operator. Take another example,
361 % \begin{Verbatim}
362 % \newdif{\D}{\mathrm{D}}
363 % \end{Verbatim}
364 % Then you get |\D| for an uppercase upright ``D'' as a differential operator.
365 %
366 % If your second argument contains only one command like |\Delta|,
367 % it's recommended to use \cs{letdif} or \cs{letdif*} instead.
368 %
369 % \cs{newdif} and \cs{newdif*} will check whether \meta{cmd} has been defined
370 % already. If so, an error message will be given.
371 %
372 % \noindent\textcolor{titlecolor}{\cs{renewdif}\marg{cmd}\marg{multi-cmd}}\DescribeMacro{\renewdif}
373 % \hfill(without correction, preamble only)\\
374 % \noindent\textcolor{titlecolor}{\cs{renewdif*}\marg{cmd}\marg{multi-cmd}}
375 % \hfill(with correction, preamble only)
376 %
377 % These two commands are basically the same as \cs{newdif} and \cs{newdif*}.
378 % The only difference is that \cs{renewdif} and \cs{renewdif*} will check
379 % whether \meta{cmd} has \emph{not} been defined yet. If so, an error message
380 % will be given.
381 %
382 % \section{Using differential operators temporarily}
383 %
384 % \noindent\textcolor{titlecolor}{\cs{mathdif}\marg{symbol}}\DescribeMacro{\mathdif}
385 % \hfill(without correction, in math mode only)\\
386 %\noindent\textcolor{titlecolor}{\cs{mathdif*}\marg{symbol}}
387 % \hfill(with correction, in math mode only)
388 %
389 % These two commands can be used in math mode only, more specifically,
390 % after \verb|\begin{document}|. For example, \verb|$x\mathdif{\Delta}\psi$|
391 % will get $x\mathdif{\Delta}\psi$.
392 %
393 % \section{Examples}
394 %
395 % This section shows how to use this package properly in your document.
396 %
397 % Take the two examples below:
398 % \begin{Verbatim}
399 % \letdif{\Delta}{Delta} % Example 1, in preamble
400 % \letdif{\nabla}{nabla} % Example 2, in preamble
401 % \end{Verbatim}
402 % Actually, the second example is more reasonable.
403 % Sometimes, we take ``$\Delta$'' as laplacian (equivalent to $\nabla^2$),
404 % while ``$\Delta$'' can also be regarded as a variable
405 % or function at some other times. Consequently, it's better to save
406 % a different command for ``$\Delta$'' as laplacian while reserve
407 % \verb|\Delta| as a command for an ordinary math symbol ``$\Delta$''.
408 % However, in the vast majority of cases, ``$\nabla$'' is regarded as
409 % nabla operator so there is no need to save a different command for
410 % ``$\nabla$''. Then we can correct the code above:
411 % \begin{Verbatim}
412 % \letdif{\laplacian}{Delta} % Example 1, corrected, in preamble
413 % \end{Verbatim}
414 % With the \pkg{xparse} package, we can define the command in another method:
415 % \begin{Verbatim}
416 % \letdif{\nabla}{nabla}
417 % \DeclareDocumentCommand{ \laplacian }{ s }{
418 % \IfBooleanTF{#1}{\mathdif{\Delta}}{\nabla^2}
419 % }
420 % \end{Verbatim}
421 % Then \verb|\laplacian| produces $\nabla^2$ and \verb|\laplacian*|
422 % produces $\Delta$.
423 %
424 % \paragraph{Dealing with ``$+$'' and ``$-$''}
425 % If you input \verb|$-\d x$|, you'll get ``$-\d x$'' in your document.
426 % However, if you think ``$-{\d x}$'' is better, you can input
427 % \verb|-{\d x}|. The ``\verb|\d x|'' in a \emph{group} will be
428 % regarded \textsl{ordinary} but not \textsl{inner} so that the
429 % small skip will disappear. Maybe ``$-\d x$'' is just okay.
430 %
431 % \section{The source code}
432 % \begin{macrocode}
433 %<*package>
434 % \end{macrocode}
435 % Check the \TeX{} format and provides the package name.
436 % \begin{macrocode}
437 \NeedsTeXFormat{LaTeX2e}
438 \ProvidesPackage{fixdif}[2023/03/20 Interface for defining differential operators.]
439 % \end{macrocode}
440 %
441 % \subsection{Control the skip between slashes and differential operator}
442 % Change the math code of slash ($/$) and backslash ($\backslash$) so that the skip
443 % between slashes and differential operators can be ignored.
444 %
445 % If the \pkg{unicode-math} package was loaded, use the \XeTeX/\LuaTeX{} primitive
446 % \cs{Umathcode} to change the type of slashes. The numeral ``4'' stands for ``open''.
447 % If \pkg{unicode-math} was not loaded but \pkg{fontspec} loaded, check if
448 % \pkg{fontspec} had reset math fonts, that is to say, the |no-math| option.
449 % \begin{macrocode}
450 \AtBeginDocument{%
451 \ifcsname symbf\endcsname%
452 \csname bool_if:cF\endcsname{g__um_main_font_defined_bool}%
453 {\csname __um_load_lm:\endcsname}%
454 \def\fd@patchUmathcode#1{% 16777216 = 16^6
455 \@tempcnta=\numexpr(\the\Umathcodenum#1-#1)/16777216\relax
456 \Umathcode #1 = "4 \@tempcnta #1}%
457 \fd@patchUmathcode{"2F}%
458 \fd@patchUmathcode{"5C}%
459 \else\ifcsname fontspec\endcsname
460 \csname bool_if:cT\endcsname{g__fontspec_math_bool}%
461 {%
462 \everymath{\mathcode`\/="413D\relax}%
463 \PackageWarning{fixdif}{Requires `no-math' option of fontspec!\MessageBreak}%
464 }% fontspec only influences "/"
465 \fi\fi}
466 % \end{macrocode}
467 % Use \cs{mathcode} to change the type of slashes. The \cs{backslash} needs to be
468 % redefined through \cs{delimiter} too.
469 % \begin{macrocode}
470 \mathcode`\/="413D
471 \mathcode`\\="426E% \backslash
472 \protected\def\backslash{\delimiter"426E30F\relax}
473 % \end{macrocode}
474 %
475 % \subsection{Patch the skips around the differential operator}
476 % \DescribeMacro{\fd@mu@p}
477 % The following \cs{fd@mu@p} patches the skip after the differential operator.
478 % \begin{macrocode}
479 \def\fd@mu@p{\mathchoice{\mskip-\thinmuskip}{\mskip-\thinmuskip}{}{}{}}
480 % \end{macrocode}
481 % The \cs{s@fd@mu@p} patches the commands with star (\cs{letdif*}, etc).
482 % \begin{macrocode}
483 \def\s@fd@mu@p{\mathchoice{}{}{\hbox{}}{\hbox{}}}
484 % \end{macrocode}
485 %
486 % \subsection{Declare the package options}
487 % \begin{macrocode}
488 \DeclareOption{rm}{%
489 \AtBeginDocument{\ifcsname symbf\endcsname%
490 \gdef\@fd@dif{\symrm{d}}\fi}%
491 \gdef\@fd@dif{\mathrm{d}}}
492 \DeclareOption{normal}{\gdef\@fd@dif{d}}
493 \DeclareOption{partial}{\@tempswatrue}
494 \DeclareOption{nopartial}{\@tempswafalse}
495 \ExecuteOptions{rm,partial}
496 \ProcessOptions\relax
497 \if@tempswa
498 \AtEndOfPackage{\letdif{\partial}{partial}}
499 \fi
500 % \end{macrocode}
501 % \DescribeMacro{\resetdfont}
502 % Define the \cs{resetdfont} command.
503 % \begin{macrocode}
504 \gdef\resetdfont#1{\AtBeginDocument{\let\@fd@dif\relax\gdef\@fd@dif{#1{d}}}}
505 % \end{macrocode}
506 %
507 % \subsection{Deal with the \cs{d} command}
508 % \DescribeMacro{\fd@dif}
509 % \cs{fd@dif} is the differential operator produced by \cs{d} in math mode.
510 % Here we prefer \cs{mathinner} to |\mathbin| to make the skip.
511 % \begin{macrocode}
512 \def\fd@dif{\mathinner{\@fd@dif}\fd@mu@p}
513 % \end{macrocode}
514 % \DescribeMacro{\fd@d@acc}
515 % Restore the \cs{d} command in text by \cs{fd@d@acc} with \cs{let}.
516 % \begin{macrocode}
517 \AtBeginDocument{\let\fd@d@acc\d
518 % \end{macrocode}
519 % \DescribeMacro{\d}
520 % Redefine the \cs{d} command. In text, we need to expand the stuffs after \cs{d}
521 % \begin{macrocode}
522 \DeclareRobustCommand\d{\ifmmode\fd@dif\else\expandafter\fd@d@acc\fi}}
523 % \end{macrocode}
524 %
525 % \subsection{User's interface for defining new differential operators}
526 % \DescribeMacro{\letdif}
527 % Define the \cs{letdif} command. The internal version of \cs{letdif}
528 % is \cs{@letdif} and \cs{s@letdif}.
529 %
530 % |#1| is the final command; |#2| is the ``control sequence name'' of |#1|'s initial definition.
531 % Here we create a command (\cs{csname}|#2nonfif|\cs{endcsname}) to restore |#2|.
532 % \begin{macrocode}
533 \def\@letdif#1#2{\AtBeginDocument{%
534 \ifcsname #2nondif\endcsname\else%
535 \expandafter\let\csname #2nondif\expandafter\endcsname
536 \csname #2\endcsname%
537 \fi%
538 \DeclareRobustCommand#1{\mathinner{\csname #2nondif\endcsname}\fd@mu@p}%
539 }}
540 % \end{macrocode}
541 % The definition of \cs{s@letdif} is similar, but with the patch for negative skips.
542 % \begin{macrocode}
543 \def\s@letdif#1#2{\AtBeginDocument{%
544 \ifcsname #2nondif\endcsname\else%
545 \expandafter\let\csname #2nondif\expandafter\endcsname
546 \csname #2\endcsname%
547 \fi%
548 \DeclareRobustCommand#1{\mathinner{\s@fd@mu@p\csname #2nondif\endcsname\hbox{}}\fd@mu@p}%
549 }}
550 \DeclareRobustCommand\letdif{\@ifstar\s@letdif\@letdif}
551 \@onlypreamble\letdif
552 % \end{macrocode}
553 % \DescribeMacro{\newdif}
554 % Define the \cs{newdif} command. |#1| is the final command; |#2| is the ``long'' argument.
555 % \begin{macrocode}
556 \long\def\@newdif#1#2{\AtBeginDocument{%
557 \ifdefined#1
558 \PackageError{fixdif}{\string#1 is already defined}
559 {Try another command instead of \string#1.}%
560 \else
561 \DeclareRobustCommand#1{\mathinner{#2}\fd@mu@p}%
562 \fi%
563 }}
564 \long\def\s@newdif#1#2{\AtBeginDocument{%
565 \ifdefined#1
566 \PackageError{fixdif}{\string#1 is already defined}
567 {Try another command instead of \string#1.}%
568 \else
569 \DeclareRobustCommand#1{\s@fd@mu@p\mathinner{#2\hbox{}}\fd@mu@p}%
570 \fi%
571 }}
572 \DeclareRobustCommand\newdif{\@ifstar\s@newdif\@newdif}
573 \@onlypreamble\newdif
574 % \end{macrocode}
575 % \DescribeMacro{\renewdif}
576 % Define the \cs{renewdif} command.
577 % \begin{macrocode}
578 \long\def\@renewdif#1#2{\AtBeginDocument{%
579 \ifdefined#1
580 \DeclareRobustCommand#1{\mathinner{#2}\fd@mu@p}%
581 \else
582 \PackageError{fixdif}{\string#1 has not been defined yet}
583 {You should use \string\newdif instead of \string\renewdif.}%
584 \fi%
585 }}
586 \long\def\s@renewdif#1#2{\AtBeginDocument{%
587 \ifdefined#1
588 \DeclareRobustCommand#1{\s@fd@mu@p\mathinner{#2\hbox{}}\fd@mu@p}%
589 \else
590 \PackageError{fixdif}{\string#1 has not been defined yet}
591 {You should use \string\newdif instead of \string\renewdif.}%
592 \fi%
593 }}
594 \DeclareRobustCommand\renewdif{\@ifstar\s@renewdif\@renewdif}
595 \@onlypreamble\renewdif
596 % \end{macrocode}
597 % \subsection{In-document commands: \cs{mathdif}}
598 % \begin{macrocode}
599 \def\@mathdif#1{\mathinner{#1}\fd@mu@p}
600 \def\s@mathdif#1{\s@fd@mu@p\mathinner{#1\mbox{}}\fd@mu@p}
601 \DeclareRobustCommand\mathdif{\@ifstar\s@mathdif\@mathdif}
602 % \end{macrocode}
603 % End of the package.
604 % \begin{macrocode}
605 %</package>
606 % \end{macrocode}
607 \endinput