Debian Codegraph @

texmf-dist/source/latex/exsol/exsol.dtx

raw
1 % \iffalse meta-comment
2 %
3 % Copyright (C) 2025 by Walter Daems <[email protected]>
4 %
5 % This work may be distributed and/or modified under the conditions of
6 % the LaTeX Project Public License, either version 1.3 of this license
7 % or (at your option) any later version. The latest version of this
8 % license is in:
9 %
10 % http://www.latex-project.org/lppl.txt
11 %
12 % and version 1.3 or later is part of all distributions of LaTeX version
13 % 2005/12/01 or later.
14 %
15 % This work has the LPPL maintenance status `maintained'.
16 %
17 % The Current Maintainer of this work is Walter Daems.
18 %
19 % This work consists of the files exsol.dtx and exsol.ins and the derived
20 % files:
21 % - exsol.sty
22 % - example.tex
23 % - example-solutionbook.tex
24 % - example-formulacollection.tex
25 % - example-local.tex
26 % \fi
27 %
28 % \iffalse
29 %
30 %<package|driver>\NeedsTeXFormat{LaTeX2e}
31 %<driver>\ProvidesFile{exsol.dtx}
32 %<package>\ProvidesPackage{exsol}
33 %<package|driver> [2025/02/14 v1.7 ExSol - Exercises and Solutions package (DMW)]
34 %<*driver>
35 \documentclass[10pt,a4paper]{ltxdoc}
36 \usepackage[english]{babel}
37 \usepackage[exercisesfontsize=small]{exsol}
38 \usepackage{booktabs}
39 \usepackage{metalogo}
40 \EnableCrossrefs
41 \CodelineIndex
42 \RecordChanges
43 \usepackage{makeidx}
44 \usepackage{alltt}
45 \IfFileExists{tocbibind.sty}{\usepackage{tocbibind}}{}
46 \IfFileExists{hyperref.sty}{\usepackage[bookmarksopen]{hyperref}}{}
47 \EnableCrossrefs
48 \CodelineIndex
49 \RecordChanges
50 \newcommand{\exsol}{\textsc{ExSol}}
51 \StopEventually{\PrintChanges\PrintIndex}
52 \def\fileversion{1.7}
53 \def\filedate{2025/02/14}
54 \begin{document}
55 \DocInput{exsol.dtx}
56 \end{document}
57 %</driver>
58 % \fi
59 %
60 % \CheckSum{0}
61 %
62 % \CharacterTable
63 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
64 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
65 % Digits \0\1\2\3\4\5\6\7\8\9
66 % Exclamation \! Double quote \" Hash (number) \#
67 % Dollar \$ Percent \% Ampersand \&
68 % Acute accent \' Left paren \( Right paren \)
69 % Asterisk \* Plus \+ Comma \,
70 % Minus \- Point \. Solidus \/
71 % Colon \: Semicolon \; Less than \<
72 % Equals \= Greater than \> Question mark \?
73 % Commercial at \@ Left bracket \[ Backslash \\
74 % Right bracket \] Circumflex \^ Underscore \_
75 % Grave accent \` Left brace \{ Vertical bar \|
76 % Right brace \} Tilde \~}
77 %
78 %
79 % \changes{v0.1}{2012/01/05}{\@ Initial version}
80 % \changes{v0.2}{2012/01/06}{\@ Minor bug fixes based on first use by
81 % Paul Levrie}
82 % \changes{v0.3}{2012/01/07}{\@ Minor bug fixes based on second use by
83 % Paul}
84 % \changes{v0.4}{2012/01/09}{\@ Allowed for non-list formatting of
85 % exercises (as default)}
86 % \changes{v0.5}{2012/01/15}{\@ Added option to also send exercises to
87 % solutions file}
88 % \changes{v0.6}{2013/05/12}{\@ Prepared for CTAN publication}
89 % \changes{v0.7}{2014/07/14}{\@ Fixed UTF8 compatibility issues}
90 % \changes{v0.8}{2014/07/15}{\@ Fixed missing babel tag and running out
91 % of write handles}
92 % \changes{v0.9}{2014/07/28}{\@ Changed default behavior
93 % w.r.t. minipage-wrapping of exercises}
94 % \changes{v0.91}{2014/08/31}{\@ Corrected minipage dependence, made }
95 % \changes{v1.0}{2015/09/16}{\@ First stable release}
96 % \changes{v1.1}{2015/12/30}{\@ Bugfix release}
97 % \changes{v1.2}{2016/05/05}{\@ Implemented multicolumn option for
98 % exercises, introduced new options (local, nolabels), separate
99 % counter for exerciseseries (only for use local mode), introduced
100 % local mode}
101 % \changes{v1.3}{2016/08/09}{\@ Correction of spacings and counters}
102 % \changes{v1.4}{2018/10/23}{\@ Allowed for adding exerciseseries label in
103 % solutionseries using option 'usesolutionserieslabels'}
104 % \changes{v1.5}{2019/01/02}{\@ Added inline and external mode}
105 % \changes{v1.6}{2024/01/07}{\@ Added check to see if babel was
106 % loaded, and issue appropriate error}
107 % \changes{v1.7}{2025/02/14}{\@ Ensured compatibility with spelatex package}
108 %
109 % \DoNotIndex{\newcommand,\newenvironment}
110 % \setlength{\parindent}{0em}
111 % \addtolength{\parskip}{0.5\baselineskip}
112 %
113 % \title{The \exsol{} package\thanks{This document
114 % corresponds to exsol~\fileversion, dated \filedate.}}
115 % \author{Walter Daems (\texttt{[email protected]})}
116 % \date{}
117 %
118 % \maketitle
119 %
120 % \section{Introduction}
121 % %%%%%%%%%%%%%%%%%%%%%%
122 %
123 % \subsection{Package goal}
124 % The package \exsol{} provides macros to allow
125 % embedding exercises and solutions in the \LaTeX{} source of an
126 % instructional text (e.g., a book or a course text) while keeping the
127 % exercises and the solutions seperately in the typeset result.
128 %
129 % In \emph{global mode} (the default), this corresponds to generating
130 % the following separate documents:
131 % \begin{itemize}
132 % \item your original text that only contains the exercises, and
133 % \item a solution book that only contains the solutions to the
134 % exercises (a package option exists to also copy the exercises
135 % themselves to the solution book).
136 % \end{itemize}
137 % The former is generated when running \LaTeX{} on your document. This
138 % run writes the solutions to a secondary file that can be included
139 % into a simple document harness, such that when running \LaTeX{} on
140 % the latter, you can generate a nice solution book.
141 %
142 % In \emph{external mode} both the exercises and the solutions are
143 % written to secondary files that can be included in a simple document
144 % harness, such that when running \LaTeX{} on these, you can generate
145 % an exercise as well as a solution book.
146 %
147 % In \emph{local mode} (invoked by specifying the package option 'local'),
148 % this corresponds to inserting the saved solutions in the current
149 % document at a later stage in the text.
150 %
151 % In \emph{inline mode} (invoked by specifying the package option
152 % 'inline'), the solutions are inserted 'on the spot'.
153 %
154 % This has been conveniently summarized in the table below:
155 % \begin{center}
156 % \begin{tabular}{ccc}
157 % \toprule
158 % \bf mode & \bf exercises & \bf solutions\\
159 % \midrule
160 % global & on the spot & in separate document\\
161 % external & in separate document & in separate document\\
162 % local & on the spot & later in the same document\\
163 % inline & on the spot & on the spot \\
164 % \bottomrule
165 % \end{tabular}
166 % \end{center}
167 % \subsection{Why use \exsol{}?}
168 % \begin{itemize}
169 % \item It allows to keep the \LaTeX{} source of your exercises and their
170 % solutions together in a single file, next to each other. Away with
171 % the nightmare to keep your solutions in sync with the exercises!
172 % \item It separates exercises and solutions, allowing you
173 % \begin{itemize}
174 % \item to only release the solution book to the instructors of the
175 % course (using global mode);
176 % \item to encourage students to first try solving the exercises
177 % without peeking into the list of solutions (or the solution book).
178 % \end{itemize}
179 % \end{itemize}
180 %
181 % \subsection{Credits}
182 % The code of the \exsol{} package was taken almost literally
183 % from \textsf{fancyvrb} \cite{fancyvrb}. Therefore, all credits go to
184 % the authors/maintainers of \textsf{fancyvrb}.
185 %
186 % Thanks to Paul Levrie, Pieter Pareit, Pekka Pere, Benjamin
187 % Grinstein and Philippe Marti for signaling problems and making
188 % suggestions for the improvement of the package and the
189 % documentation.
190 %
191 % \subsection{Note}
192 % As of version 1.2, the package also contains facilities for
193 % generating a formula collection. The only limitation is that
194 % exercises and solutions cannot be part of the formula collection.
195 % Though this is a restriction, it is not a severe one in my
196 % opinion. Formula collections should be as concise as they can be.
197 %
198 % Though generating formula collections goes beyond exercises and
199 % solutions, I chose not to change the package's name
200 % \exsol{}. Einstein's name was also not changed into Relativistic
201 % Einstein when he got to understand the theory of relativity.
202 %
203 % \section{Installation}
204 % %%%%%%%%%%%%%%%%%%%%%%%%
205 % Either you are a package manager and then you'll know how to
206 % prepare an installation package for \exsol{}.
207 %
208 % Either you are a normal user and then you have two options. First,
209 % check if there is a package that your favorite \LaTeX{}
210 % distributor has prepared for you. Second, grab the TDS package
211 % from CTAN \cite{CTAN} (|exsol.tds.zip|) and unzip it
212 % somewhere in your own TDS tree, regenerate your filename database
213 % and off you go.
214 % In any case, make sure that \LaTeX{} finds the |exsol.sty|
215 % file.
216 %
217 % The \exsol{} package uses some auxiliary packages:
218 % \textsf{fancyvrb},
219 % \textsf{ifthen}, \textsf{kvoptions} and, optionally,
220 % \textsf{babel}. Fetch them from CTAN \cite{CTAN} if your \TeX{}
221 % distributor does not provide them.
222 %
223 % \section{Usage}
224 % %%%%%%%%%%%%%%%%%
225 %
226 % \subsection{Preparing your document source}
227 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
228 %
229 % \subsubsection{Loading the package}
230 % The macro package exsol can be loaded with:
231 % \begin{verbatim}
232 % \usepackage{babel}
233 % \usepackage{exsol}
234 % \end{verbatim}
235 %
236 % Note before we start that you need to load the babel package before
237 % you load the exsol package! This is to allow you to load the
238 % appropriate languages for your text.
239 %
240 % OK, now let's get started.
241 %
242 % Your first choice to make is where you want your solutions to
243 % appear. The primary objective of the exsol package was 'global
244 % mode', i.e. separating your solutions from the exercises,
245 % gathering the solutions in a separate book.
246 % To this end, don't specify the package option '|[local]|', or
247 % specify '|[local=false]|'.
248 %
249 % A second mode of operation is 'local mode'. This allows grouping
250 % your exercises in series and including them later in your text.
251 % Gathering exercises in (numbered) series and 'loading' them locally
252 % in your text, allows for simplifying the
253 % individual exercise numbers (omitting their prefix containing,
254 % chapter number, section number, subsection number a.s.o.).
255 %
256 % A third mode of operation is 'inline mode', in which the
257 % solution is inserted in the main text 'on the spot'. You can trigger
258 % this, by specifying the package option 'inline'.
259 %
260 % \subsubsection{Global mode - flat grouping exercises}
261 % Adding exercises together with their solutions in your document is
262 % easy. Just embed them in a
263 % |exercise| and a corresponding |solution| environment.
264 % Optionally, you may embed several of them in a |exercises|
265 % environment to make them stand out in your text.
266 %
267 % \begin{verbatim}
268 % \begin{exercises}[columns=2]
269 %
270 % \begin{exercise}
271 % Calculate $y = 5 + 7$
272 % \end{exercises}
273 % \begin{solution}
274 % $y = 12$
275 % \end{solution}
276 %
277 % \begin{exercise}
278 % Calculate $y = 7 - 12$
279 % \end{exercises}
280 % \begin{solution}
281 % $y = -5$
282 % \end{solution}
283 %
284 % \end{exercises}
285 % \end{verbatim}
286 %
287 % The optional argument of the exercises environment allows specifying
288 % the typesetting in multiple columns.
289 %
290 % On how to generate a solution book, take a look at the examples in
291 % section~\ref{examplesglobal}.
292 %
293 % \subsubsection{Local mode - grouping of exercises in series}
294 % One might also consider to keep the solutions in the same text, in
295 % local mode. In this case, we advise to gather the exercises in
296 % series (e.g. according to their degree of difficulty). This can be
297 % done by using the |exerciseseries| environment instead of the
298 % |exercises| environment.
299 % This environment takes and also takes a mandatory label argument.
300 % In addition it takes two optional arguments:
301 % \begin{itemize}
302 % \item |columns| to specify the amount of clumns
303 % \item |exsubrule| to specify the creation of a horizontal rule below
304 % the exercise series.
305 % \item |solsubrule| to specify the creation of a horizontal rule below
306 % the solution series.
307 % \item |subrule| to specify the creation of a horizontal rule below
308 % the exercise and the solution series.
309 % \end{itemize}
310 %
311 %
312 % \begin{verbatim}
313 % \begin{exerciseseries}[columns=2,subrule=\hrule]{Easy exercises}
314 %
315 % \begin{exercise}
316 % Calculate $y = 5 + 7$
317 % \end{exercise}
318 % \begin{solution}
319 % $y = 12$
320 % \end{solution}
321 %
322 % \begin{exercise}
323 % Calculate $y = 7 - 12$
324 % \end{exercise}
325 % \begin{solution}
326 % $y = -5$
327 % \end{solution}
328 %
329 % \end{exerciseseries}
330 %
331 % \begin{exerciseseries}{Difficult exercises}
332 %
333 % \begin{exercise}
334 % Calculate $y = 5 \cdot 7$
335 % \end{exercise}
336 % \begin{solution}
337 % $y = 35$
338 % \end{solution}
339 %
340 % \begin{exercise}
341 % Calculate $y = 8 / 4$
342 % \end{exercise}
343 % \begin{solution}
344 % $y = 2$
345 % \end{solution}
346 %
347 % \end{exerciseseries}
348 % \end{verbatim}
349 %
350 % As an alternative, you can specify the 'inine' option to include
351 % the solutions on the spot where you specified them.
352 %
353 % \subsection{Examples}
354 %
355 % \subsubsection{Global mode}
356 % \label{examplesglobal}
357 % Below, you can find an example of a file that contains a number of
358 % exercises and solutions, with the goal to generate a separate
359 % solution book. Note that referencing exercises works just as you
360 % would expect it.
361 %
362 % \begin{Verbatim}[fontsize=\footnotesize]
363 %<*example>
364 \documentclass[a4paper,10pt]{article}
365
366 \usepackage{a4wide}
367 \usepackage[english]{babel}
368 \usepackage[copyexercisesinsolutions]{exsol}
369
370 \title{Gobal example, from the \textsf{ExSol} package}
371 \author{Walter Daems}
372 \setlength{\parindent}{0em}
373 \begin{document}
374 \maketitle
375
376 \section{Introduction}
377
378 In this text we explain how to solve second-order polynomial
379 equations.
380
381 \section{Solving second-order polynomial equations}
382
383 \begin{informulacollectiononly}
384 \section*{Solving second-order polynomial equations}
385 \end{informulacollectiononly}
386 \begin{informulacollection}
387 The roots of the following equation
388 \begin{equation}
389 a x^2 + bx + c = 0
390 \end{equation}
391 can be determined as:
392 \begin{equation}
393 x_{1,2} = \frac{-b \pm \sqrt{b^2 - 4 a c}}{2 a}
394 \end{equation}
395 \end{informulacollection}
396
397 To make sure you master calculating the roots of second-order
398 equation, please solve exercise \ref{ex:1}.
399
400
401 \begin{exercises}[columns = 2]
402
403 \begin{exercise}
404 \label{ex:1}
405 Solve the following equation for $x \in C$, with $C$ the set of
406 complex numbers:
407 \begin{equation}
408 5 x^2 -3 x = 5
409 \end{equation}
410 \end{exercise}
411 \begin{solution}
412 Let's start by rearranging the equation, a bit:
413 \begin{eqnarray}
414 5.7 x^2 - 3.1 x &=& 5.3\\
415 5.7 x^2 - 3.1 x -5.3 &=& 0
416 \end{eqnarray}
417 The equation is now in the standard form:
418 \begin{equation}
419 a x^2 + b x + c = 0
420 \end{equation}
421 For quadratic equations in the standard form, we know that two
422 solutions exist:
423 \begin{equation}
424 x_{1,2} = \frac{ -b \pm \sqrt{d}}{2a}
425 \end{equation}
426 with
427 \begin{equation}
428 d = b^2 - 4 a c
429 \end{equation}
430 If we apply this to our case, we obtain:
431 \begin{equation}
432 d = (-3.1)^2 - 4 \cdot 5.7 \cdot (-5.3) = 130.45
433 \end{equation}
434 and
435 \begin{eqnarray}
436 x_1 &=& \frac{3.1 + \sqrt{130.45}}{11.4} = 1.27\\
437 x_2 &=& \frac{3.1 - \sqrt{130.45}}{11.4} = -0.73
438 \end{eqnarray}
439 The proposed values $x = x_1, x_2$ are solutions to the given equation.
440 \end{solution}
441 \begin{exercise}
442 \label{ex:2}
443 Consider a 2-dimensional vector space equipped with a Euclidean
444 distance function. Given a right-angled triangle, with the sides
445 $A$ and $B$ adjacent to the right angle having lengths, $3$ and
446 $4$, calculate the length of the hypotenuse, labeled $C$.
447 \end{exercise}
448 \begin{solution}
449 This calls for application of Pythagoras' theorem, which
450 tells us:
451 \begin{equation}
452 \left\|A\right\|^2 + \left\|B\right\|^2 = \left\|C\right\|^2
453 \end{equation}
454 and therefore:
455 \begin{eqnarray}
456 \left\|C\right\|
457 &=& \sqrt{\left\|A\right\|^2 + \left\|B\right\|^2}\\
458 &=& \sqrt{3^2 + 4^2}\\
459 &=& \sqrt{25} = 5
460 \end{eqnarray}
461 Therefore, the length of the hypotenuse equals $5$.
462 \end{solution}
463 \end{exercises}
464
465 And now, we can come to the conclusion.
466 \section{Conclusion}
467 Solving second-order polynomial equations is very easy.
468 \end{document}
469 %</example>
470 %\end{Verbatim}
471 %
472 % The result in the original document, can be seen in the file
473 % |example.pdf|. As you can see, the formulacollection entry and the
474 % exercise appear. There's no trace of the solution.
475 %
476 % The solution can be recovered by including the |example.sol.tex|
477 % file in an appropriate harness. This is explained in
478 % section~\ref{harnesses}.
479 %
480 % \subsubsection{external mode}
481 % \label{examplesexternal}
482 % Below, you can find an example of a file that contains a number of
483 % exercises and solutions, with the goal to generate a separate
484 % exercise and solution book.
485 %
486 % \begin{Verbatim}[fontsize=\footnotesize]
487 %<*example-external>
488 \documentclass[a4paper,10pt]{article}
489
490 \usepackage{a4wide}
491 \usepackage[english]{babel}
492 \usepackage[external]{exsol}
493
494 \title{External example, from the \textsf{ExSol} package}
495 \author{Walter Daems}
496 \setlength{\parindent}{0em}
497 \begin{document}
498 \maketitle
499
500 \section{Introduction}
501
502 In this text we explain how to solve second-order polynomial
503 equations.
504
505 \section{Solving second-order polynomial equations}
506
507 \begin{informulacollectiononly}
508 \section*{Solving second-order polynomial equations}
509 \end{informulacollectiononly}
510 \begin{informulacollection}
511 The roots of the following equation
512 \begin{equation}
513 a x^2 + bx + c = 0
514 \end{equation}
515 can be determined as:
516 \begin{equation}
517 x_{1,2} = \frac{-b \pm \sqrt{b^2 - 4 a c}}{2 a}
518 \end{equation}
519 \end{informulacollection}
520
521 \begin{exercises}[columns = 2]
522
523 \begin{exercise}
524 Solve the following equation for $x \in C$, with $C$ the set of
525 complex numbers:
526 \begin{equation}
527 5 x^2 -3 x = 5
528 \end{equation}
529 \end{exercise}
530 \begin{solution}
531 Let's start by rearranging the equation, a bit:
532 \begin{eqnarray}
533 5.7 x^2 - 3.1 x &=& 5.3\\
534 5.7 x^2 - 3.1 x -5.3 &=& 0
535 \end{eqnarray}
536 The equation is now in the standard form:
537 \begin{equation}
538 a x^2 + b x + c = 0
539 \end{equation}
540 For quadratic equations in the standard form, we know that two
541 solutions exist:
542 \begin{equation}
543 x_{1,2} = \frac{ -b \pm \sqrt{d}}{2a}
544 \end{equation}
545 with
546 \begin{equation}
547 d = b^2 - 4 a c
548 \end{equation}
549 If we apply this to our case, we obtain:
550 \begin{equation}
551 d = (-3.1)^2 - 4 \cdot 5.7 \cdot (-5.3) = 130.45
552 \end{equation}
553 and
554 \begin{eqnarray}
555 x_1 &=& \frac{3.1 + \sqrt{130.45}}{11.4} = 1.27\\
556 x_2 &=& \frac{3.1 - \sqrt{130.45}}{11.4} = -0.73
557 \end{eqnarray}
558 The proposed values $x = x_1, x_2$ are solutions to the given equation.
559 \end{solution}
560 \begin{exercise}
561 Consider a 2-dimensional vector space equipped with a Euclidean
562 distance function. Given a right-angled triangle, with the sides
563 $A$ and $B$ adjacent to the right angle having lengths, $3$ and
564 $4$, calculate the length of the hypotenuse, labeled $C$.
565 \end{exercise}
566 \begin{solution}
567 This calls for application of Pythagoras' theorem, which
568 tells us:
569 \begin{equation}
570 \left\|A\right\|^2 + \left\|B\right\|^2 = \left\|C\right\|^2
571 \end{equation}
572 and therefore:
573 \begin{eqnarray}
574 \left\|C\right\|
575 &=& \sqrt{\left\|A\right\|^2 + \left\|B\right\|^2}\\
576 &=& \sqrt{3^2 + 4^2}\\
577 &=& \sqrt{25} = 5
578 \end{eqnarray}
579 Therefore, the length of the hypotenuse equals $5$.
580 \end{solution}
581 \end{exercises}
582 And now, we can come to conclusion.
583
584 \section{Conclusion}
585 Solving second-order polynomial equations is very easy.
586 \end{document}
587 %</example-external>
588 %\end{Verbatim}
589 %
590 % The result in the original document, can be seen in the file
591 % |example-external.pdf|. As you can see, only the formulacollection
592 % entry appears. There's no trace of the exercises or the solutions.
593 %
594 % \subsubsection{Harnesses}
595 % \label{harnesses}
596 %
597 % When running \LaTeX{} on your document in global or external mode
598 % (e.g., the file example-external.tex as part of the exsol package,
599 % as a side effect files with the
600 % extension |.sol.tex|, |.exc.tex| and/or |.fc.tex| have been written
601 % to disk (in our case, the files |example-external.sol.tex|,
602 % |example-external.exc.tex| and |example-external.fc.tex|),
603 % containing all exercises, solutions and entries for the formula
604 % collection in sequence.
605 %
606 % Generating an exercises/solution book is as simple as including the
607 % exercise/solution file into a simple \LaTeX{} harness, that allows
608 % you giving it a proper title page and to add other bells and whistles.
609 % As an example, you can find a harness for a solution book below.
610 %
611 % \begin{Verbatim}[fontsize=\footnotesize]
612 %<*examplesol>
613 \documentclass[a4paper,10pt]{article}
614
615 \usepackage{a4wide}
616 \usepackage[english]{babel}
617 \usepackage{exsol}
618
619 \setlength{\parindent}{0em}
620
621 \title{Solutions to the exercises, specified in the example of the
622 \textsf{ExSol} package}
623 \author{Walter Daems}
624
625 \begin{document}
626
627 \maketitle
628
629 \input{example.sol.tex}
630
631 \end{document}
632 %</examplesol>
633 % \end{Verbatim}
634 %
635 % Similar harnesses can be used for the exercise book and the formula
636 % collection.
637 %
638 % \begin{Verbatim}[fontsize=\footnotesize]
639 %<*examplefor>
640 \documentclass[a4paper,10pt]{article}
641
642 \usepackage{a4wide}
643 \usepackage[english]{babel}
644 \usepackage{exsol}
645
646 \setlength{\parindent}{0em}
647
648 \title{Formula collection, specified in the example of the
649 \textsf{ExSol} package}
650 \author{Walter Daems}
651
652 \begin{document}
653
654 \maketitle
655
656 \input{example.fc.tex}
657
658 \end{document}
659 %</examplefor>
660 % \end{Verbatim}
661 %
662 % \begin{Verbatim}[fontsize=\footnotesize]
663 %<*exampleexc>
664 \documentclass[a4paper,10pt]{article}
665
666 \usepackage{a4wide}
667 \usepackage[english]{babel}
668 \usepackage{exsol}
669
670 \setlength{\parindent}{0em}
671
672 \title{Exercise book, specified in the example-external of the
673 \textsf{ExSol} package}
674 \author{Walter Daems}
675
676 \begin{document}
677
678 \maketitle
679
680 \input{example-external.exc.tex}
681
682 \end{document}
683 %</exampleexc>
684 % \end{Verbatim}
685 %
686 %
687 % \subsubsection{Local mode}
688 %
689 % Below, you can find an example of a file that contains a number of
690 % exercises and solutions, with the goal to include them later in the
691 % same document.
692 % This is done by issuing the |loadSolutions| macro at the very end of
693 % the file. This macro can be called multiple times and will gobble up
694 % and include all solutions so far. As a consequence the solutions
695 % file is emptied and can be filled again by specifying new
696 % exercise/solution pairs.
697 %
698 %
699 % \begin{Verbatim}[fontsize=\footnotesize]
700 %<*example-local>
701 \documentclass[a4paper,10pt]{article}
702
703 \usepackage{a4wide}
704 \usepackage[german]{babel}
705 \usepackage[local,nolabels,exerciseaslist,usesolutionserieslabels]{exsol}
706 \usepackage{enumitem}
707
708 \setlength{\exsolexercisetopbottomsep}{0pt plus 0pt minus 1pt}
709 \setlength{\exsolexerciseleftmargin}{2em}
710 \setlength{\exsolexerciserightmargin}{1em}
711 \setlength{\exsolexerciseparindent}{0em}
712 \setlength{\exsolexerciselabelsep}{1ex}
713 \setlength{\exsolexerciselabelwidth}{30pt}
714 \setlength{\exsolexerciseitemindent}{0pt}
715 \setlength{\exsolexerciseparsep}{\parskip}
716
717 \title{Local example, from the \textsf{ExSol} package}
718 \author{Philippe Marti}
719 \setlength{\parindent}{0em}
720 \begin{document}
721 \maketitle
722
723 \section{\exercisesname}
724
725 \begin{exerciseseries}[columns=2,solsubrule=\hrule]{Gleichungen $|$ Gleichungssysteme}
726
727 \begin{exercise}
728 Die Summe zweier Zahlen ist 17 und ihre Differenz 7. Bestimme die
729 beiden Zahlen!
730 \end{exercise}
731 \begin{solution}
732 5 und 12
733 \end{solution}
734
735 \begin{exercise}
736 Die Differenz einer Zahl und dem Dreifachen einer zweiten Zahl ist
737 14. Bestimme die beiden Zahlen, falls die zweite Zahl ein Zehntel
738 der ersten ist.
739 \end{exercise}
740 \begin{solution}
741 20 und 2
742 \end{solution}
743
744 \end{exerciseseries}
745
746 \begin{exerciseseries}[columns=2]{Geraden}
747 \begin{exercise}
748 Berechne den Schnittpunkt von \mbox{$y=3x+1$} und \mbox{$y=3x-7$}.
749 \end{exercise}
750 \begin{solution}
751 Es gibt keinen Schnittpunkt
752 \end{solution}
753
754 \begin{exercise}
755 Die Familie Meier fordert Offerten f\"ur eine Heizungsreparatur
756 ein. Firma A berechnet f\"ur die Fahrtkosten Fr. 42.- und f\"ur
757 jede Arbeitsstunde 76.-. Bei der Firma B sind die Fahrtkosten
758 Fr. 35.- und jede Arbeitsstunde wird mit Fr. 80.- berechnet.
759 \begin{enumerate}[label=\alph*)]
760 \item Welche Kosten entstehen f\"ur beide Firmen, wenn ein Monteur
761 3.5 Stunden
762 f\"ur die Arbeit benötigt? Welche Firma ist in diesem Fall
763 kostengünstiger?
764
765 \item Wie lauten die Gleichungen derjenigen zwei linearen
766 Funktionen, die jeder Arbeitszeit $x$ (in Stunden) die
767 entstehenden Kosten $y$ (in Franken) zuordnet?
768
769 \item Berechne, bei welcher Arbeitszeit die Kosten bei beiden
770 Firmen gleich sind.
771 \end{enumerate}
772 \end{exercise}
773 \begin{solution}
774 \begin{enumerate}[label=\alph*)]
775 \item Firma A: 308.- $|$ Firma B: 315.-
776 \item A: $y=76x+42$ $|$ B: $y=80x+35$
777 \item Bei $1\frac{3}{4}$ Stunden
778 \end{enumerate}
779 \end{solution}
780 \end{exerciseseries}
781
782 \section{\solutionsname}
783 \loadSolutions
784
785 \end{document}
786 %</example-local>
787 % \end{Verbatim}
788 %
789 %
790 % \subsubsection{Inline mode}
791 %
792 % Below, you can find an example of a file that contains a number of
793 % exercises and solutions, with the goal to include the solutions on
794 % the spot.
795 %
796 %
797 % \begin{Verbatim}[fontsize=\footnotesize]
798 %<*example-inline>
799 \documentclass[11pt,a4paper]{article}
800
801 \usepackage[german]{babel}
802 \usepackage[inline,usesolutionserieslabels]{exsol}
803 \usepackage{enumitem}
804
805 \setlength{\exsolexercisetopbottomsep}{0pt plus 0pt minus 1pt}
806 \setlength{\exsolexerciseleftmargin}{2em}
807 \setlength{\exsolexerciserightmargin}{1em}
808 \setlength{\exsolexerciseparindent}{0em}
809 \setlength{\exsolexerciselabelsep}{1ex}
810 \setlength{\exsolexerciselabelwidth}{30pt}
811 \setlength{\exsolexerciseitemindent}{0pt}
812 \setlength{\exsolexerciseparsep}{\parskip}
813
814 \title{Local inline example, from the \textsf{ExSol} package}
815 \author{Philippe Marti}
816 \setlength{\parindent}{0em}
817 \begin{document}
818 \maketitle
819
820 \section{Gleichungssysteme und Geraden}
821
822 Ein bisschen Theorie\ldots
823
824 \begin{exerciseseries}[solsubrule=\hrule]{Gleichungssysteme}
825 \begin{exercise}
826 Die Summe zweier Zahlen ist 17 und ihre Differenz 7. Bestimme die
827 beiden Zahlen!
828 \end{exercise}
829 \begin{solution}
830 5 und 12
831 \end{solution}
832
833 \begin{exercise}
834 Die Differenz einer Zahl und dem Dreifachen einer zweiten Zahl ist
835 14. Bestimme die beiden Zahlen, falls die zweite Zahl ein Zehntel
836 der ersten ist.
837 \end{exercise}
838 \begin{solution}
839 20 und 2
840 \end{solution}
841 \end{exerciseseries}
842 ~\\
843 Etwas mehr Theorie\ldots
844
845 \begin{exerciseseries}{Geraden}
846 \begin{exercise}
847 Berechne den Schnittpunkt von \mbox{$y=3x+1$} und \mbox{$y=3x-7$}.
848 \end{exercise}
849 \begin{solution}
850 Es gibt keinen Schnittpunkt
851 \end{solution}
852
853 \begin{exercise}
854 Die Familie Meier fordert Offerten f\"ur eine Heizungsreparatur
855 ein. Firma A berechnet f\"ur die Fahrtkosten Fr. 42.- und f\"ur
856 jede Arbeitsstunde 76.-. Bei der Firma B sind die Fahrtkosten
857 Fr. 35.- und jede Arbeitsstunde wird mit Fr. 80.- berechnet.
858 \begin{enumerate}[label=\alph*)]
859 \item Welche Kosten entstehen f\"ur beide Firmen, wenn ein Monteur
860 3.5 Stunden
861 f\"ur die Arbeit benötigt? Welche Firma ist in diesem Fall
862 kostengünstiger?
863
864 \item Wie lauten die Gleichungen derjenigen zwei linearen
865 Funktionen, die jeder Arbeitszeit $x$ (in Stunden) die
866 entstehenden Kosten $y$ (in Franken) zuordnet?
867
868 \item Berechne, bei welcher Arbeitszeit die Kosten bei beiden
869 Firmen gleich sind.
870 \end{enumerate}
871 \end{exercise}
872 \begin{solution}
873 \begin{enumerate}[label=\alph*)]
874 \item Firma A: 308.- $|$ Firma B: 315.-
875 \item A: $y=76x+42$ $|$ B: $y=80x+35$
876 \item Bei $1\frac{3}{4}$ Stunden
877 \end{enumerate}
878 \end{solution}
879 \end{exerciseseries}
880
881 \end{document}
882 %</example-inline>
883 % \end{Verbatim}
884 %
885 %
886 % \subsection{Fiddling with the spacing}
887 %
888 % The default spacing provided by the \textsf{ExSol} package should be
889 % fine for most users. However, if you like to tweak, below you can
890 % find the controls.
891 %
892 % As the formula collection generation is intended to interfere as
893 % little as possible with the flow of the main document, you will
894 % notice that it is impossible to control the extra spacing, as no
895 % extra spacing should originate from using the
896 % |informulacollection| environment.
897 %
898 % \subsubsection{Spacing before and after the \texttt{exercises} environment}
899 %
900 % The lengths below control the spacing of the |exercises| environment:
901 % \begin{itemize}
902 % \item |exsolexerciseaboveskip|: rubber length controlling the
903 % vertical space after the top marker line of the environment
904 % \item |exsolexercisebelowskip|: rubber length controlling the
905 % vertical space before the bottom marker line of the environment
906 % \end{itemize}
907 %
908 % You can simply specify them like:
909 % \begin{verbatim}
910 % \setlength{\exsolexercisesaboveskip}{1ex plus 1pt minus 1pt}
911 % \setlength{\exsolexercisesbelowskip}{1ex plus 1pt minus 1pt}
912 % \end{verbatim}
913 % The spacings specified here are the package defaults.
914 %
915 % \subsubsection{Spacing of the individual exercises}
916 % Caution: the spacing can only be tuned, when one invokes the
917 % |exerciseaslist| package option!
918 %
919 % Then lengths below control the spacing of the |exercise| environment:
920 % \begin{itemize}
921 % \item |exercisetopbottomsep|: rubber length controlling the vertical
922 % space before and after individual exercises
923 % \item |exerciseleftmargin|: length controlling the horizontal
924 % space between the surrounding environment's left margin (most
925 % often the page margin) and the left edge of the exercise
926 % environment
927 % \item |exerciseleftmargin|: length controlling the horizontal
928 % space between the surrounding environment's right margin (most
929 % often the page margin) and the right edge of the exercise
930 % environment
931 % \item |exerciseitemindent|: length controlling the first-line
932 % indentation of the first paragraph in the exercise environment
933 % (actually, the label is set w.r.t. this position, that we will
934 % conveniently call position 'x')
935 % \item |exerciseparindent|: length controlling the first-line
936 % indentation of the other paragraphs in the exercise environment.
937 % \item |exerciselabelsep|: length controlling the distance between
938 % the label and position 'x'
939 % \item |exerciselabelwidth|: minimal width of the (internally
940 % right-alligned) box to use for the exercises label; if the box is
941 % not sufficiently big, position 'x' is shifted to the right
942 % \item |exerciseparsep|: internal paragraph separation (vertically)
943 % \end{itemize}
944 %
945 % You can simply specify them like:
946 % \begin{verbatim}
947 % \setlength{\exsolexercisetopbottomsep}{0pt plus 0pt minus 1pt}
948 % \setlength{\exsolexerciseleftmargin}{1em}
949 % \setlength{\exsolexerciserightmargin}{1em}
950 % \setlength{\exsolexerciseparindent}{0em}
951 % \setlength{\exsolexerciselabelsep}{0.5em}
952 % \setlength{\exsolexerciselabelwidth}{0pt}
953 % \setlength{\exsolexerciseitemindent}{0pt}
954 % \setlength{\exsolexerciseparsep}{\parskip}
955 % \end{verbatim}
956 % The spacings specified here are the package defaults.
957 %
958 % \subsection{Tips and tricks}
959 %
960 % If you want to include the solutions all at the
961 % end of the current document in global mode, you need to explicitly
962 % close the solution stream before including it:
963 % \begin{verbatim}
964 % \closeout\solutionstream\input{\jobname.sol.tex}
965 % \end{verbatim}
966 %
967 % If you want to avoid exercises being split by a page boundary, then
968 % provide the package option 'minipage'. This causes the exercises to
969 % be wrapped in a minipage environment.
970 %
971 % \clearpage
972 %
973 % \section{Implementation}
974 % %%%%%%%%%%%%%%%%%%%%%%%
975 % \begin{macrocode}
976 %<*package>
977 % \end{macrocode}
978 %
979 % \subsection{Auxiliary packages}
980 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
981 % The package uses some auxiliary packages:
982 % \begin{macrocode}
983 \RequirePackage{ifmtarg}
984 \RequirePackage{fancyvrb}
985 \RequirePackage{ifthen}
986 \RequirePackage{kvoptions}
987 \RequirePackage{multicol}
988 \RequirePackage{varwidth}
989 \@ifpackageloaded{babel}{\typeout{Good: you loaded babel first!}}{\PackageError{exsol}{You forgot to load the
990 babel package before exsol}{}}
991 % \end{macrocode}
992 %
993 % \subsection{Package options}
994 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%
995 % The package offers some options:
996 %
997 % \changes{v1.2}{2016/05/05}{Added option local}
998 % \begin{macro}{local}
999 % This boolean option (true, false) allows setting the mode of the
1000 % package into local, i.e. that the numbering of the exercises is not
1001 % related to the position in the document, but uses it's own local
1002 % counter in combination with a exerciseseries counter.
1003 % \begin{macrocode}
1004 \DeclareBoolOption[false]{local}
1005 % \end{macrocode}
1006 % \end{macro}
1007 %
1008 % \changes{v1.5}{2019/01/02}{Added option external}
1009 % \begin{macro}{external}
1010 % This boolean option (true, false) allows setting the mode of the
1011 % package into external, i.e. that the both exercises and solutions
1012 % will be written to separate files.
1013 % \begin{macrocode}
1014 \DeclareBoolOption[false]{external}
1015 % \end{macrocode}
1016 % \end{macro}
1017 %
1018 % \changes{v1.5}{2019/01/02}{Added option inline}
1019 % \begin{macro}{inline}
1020 % This boolean option (true, false) allows setting the mode of the
1021 % package into inline, i.e. that the solutions will be included 'on
1022 % the spot'.
1023 % \begin{macrocode}
1024 \DeclareBoolOption[false]{inline}
1025 % \end{macrocode}
1026 % \end{macro}
1027 %
1028 % \changes{v1.2}{2016/05/05}{Added option nolabels}
1029 % \begin{macro}{nolabels}
1030 % This boolean option (true, false) allows suppressing the 'Exercise'
1031 % and 'Solution' label that normally appear before the exercise and
1032 % solution number.
1033 % \begin{macrocode}
1034 \DeclareBoolOption[false]{nolabels}
1035 % \end{macrocode}
1036 % \end{macro}
1037 %
1038 % \changes{v0.2}{2012/01/06}{Added option exercisesfont}
1039 % \changes{v0.4}{2012/01/09}{Changed name of option to
1040 % exercisesfontsize}
1041 %
1042 % \begin{macro}{exercisesfontsize}
1043 % This option allows setting the font of the |exercises|
1044 % environment. You may chopse one of tiny, scriptsize, footnotesize,
1045 % small, normalsize, large, etc.\\
1046 % E.g., |[exercisesfontsize=small]|.
1047 % \begin{macrocode}
1048 \DeclareStringOption[normalsize]{exercisesfontsize}
1049 % \end{macrocode}
1050 % \end{macro}
1051 %
1052 % \changes{v0.4}{2012/01/06}{Added option exercisesinlist}
1053 % \changes{v0.5}{2012/01/09}{Changed option exercisesinlist to exerciseaslist}
1054 %
1055 % \begin{macro}{exerciseaslist}
1056 % This boolean option (true, false) allows setting the typesetting of
1057 % the |exercises| in a list environment. This causes the
1058 % exercises to be typeset in a more compact fashion, with indented
1059 % left and right margin.
1060 % \begin{macrocode}
1061 \DeclareBoolOption[false]{exerciseaslist}
1062 % \end{macrocode}
1063 % \end{macro}
1064 %
1065 % \changes{v0.5}{2012/01/09}{Added option copyexercisesinsolutions}
1066 % \begin{macro}{copyexercisesinsolutions}
1067 % This boolean option (true, false) allows copying the exercises in
1068 % the solutions file, to allow for making a complete stand-alone
1069 % exercises bundle.
1070 % \begin{macrocode}
1071 \DeclareBoolOption[false]{copyexercisesinsolutions}
1072 % \end{macrocode}
1073 % \end{macro}
1074 %
1075 % \changes{v0.9}{2014/07/28}{. Changed default behavior
1076 % w.r.t. minipage-wraping of exercises}
1077 % \begin{macro}{minipage}
1078 % This boolean option (true, false) causes the exercises to be
1079 % wrapped in minipages. This avoids them getting split by a page
1080 % boundary.
1081 % \begin{macrocode}
1082 \DeclareBoolOption[false]{minipage}
1083 % \end{macrocode}
1084 % \end{macro}
1085 %
1086 % \changes{v1.4}{2018/10/23}{. added 'usesolutionserieslabels' option}
1087 % \begin{macro}{usesolutionserieslabels}
1088 % This boolean options (true,false) causes the exerciseseries label
1089 % to be reused when inserting the corresponding solutionseries.
1090 % \begin{macrocode}
1091 \DeclareBoolOption[false]{usesolutionserieslabels}
1092 % \end{macrocode}
1093 % \end{macro}
1094 %
1095 % The options are processed using:
1096 % \begin{macrocode}
1097 \ProcessKeyvalOptions*
1098 % \end{macrocode}
1099 %
1100 % The options are subsequently handled
1101 % \begin{macrocode}
1102 \newcommand{\exercisesfontsize}{\csname \exsol@exercisesfontsize\endcsname}
1103 % \end{macrocode}
1104 %
1105 %
1106 % \subsection{Customization of lengths}
1107 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1108 % The commands below allow customizing many lengths that control the
1109 % typesetting of the exercises.
1110 %
1111 % \changes{v0.91}{2014/08/31}{added user-accessible lengths}
1112 % First some lengths to control the spacing before and after |exercises|.
1113 % \begin{macrocode}
1114 \newlength{\exsolexercisesaboveskip}
1115 \setlength{\exsolexercisesaboveskip}{0ex plus 1pt minus 1pt}
1116 \addtolength{\exsolexercisesaboveskip}{-2\baselineskip}
1117 \newlength{\exsolexercisesbelowskip}
1118 \setlength{\exsolexercisesbelowskip}{0ex plus 1pt minus 1pt}
1119 \addtolength{\exsolexercisesbelowskip}{\baselineskip}
1120 % \end{macrocode}
1121 %
1122 % Then some lengths to control the spacing for a single
1123 % exercise. These lengths only work when the |exerciseaslist| package
1124 % option has been specified. Sensible defaults have been set.
1125 % \begin{macrocode}
1126 \newlength{\exsolexercisetopbottomsep}
1127 \setlength{\exsolexercisetopbottomsep}{0pt plus 0pt minus 1pt}
1128 \newlength{\exsolexerciseleftmargin}
1129 \setlength{\exsolexerciseleftmargin}{1em}
1130 \newlength{\exsolexerciserightmargin}
1131 \setlength{\exsolexerciserightmargin}{1em}
1132 \newlength{\exsolexerciseparindent}
1133 \setlength{\exsolexerciseparindent}{0em}
1134 \newlength{\exsolexerciselabelsep}
1135 \setlength{\exsolexerciselabelsep}{0.5em}
1136 \newlength{\exsolexerciselabelwidth}
1137 \setlength{\exsolexerciselabelwidth}{0pt}
1138 \newlength{\exsolexerciseitemindent}
1139 \setlength{\exsolexerciseitemindent}{0pt}
1140 \newlength{\exsolexerciseparsep}
1141 \setlength{\exsolexerciseparsep}{\parskip}
1142 % \end{macrocode}
1143 %
1144 %
1145 % \subsection{Con- and destruction of the auxiliary streams}
1146 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1147 % At the beginning of your document, we start by opening a stream to a
1148 % file that will be used to write the solutions to. At the end of your
1149 % document, the package closes the stream.
1150 % \changes{v0.8}{2014/07/15}{moved newwrite of exercise stream to this
1151 % spot to avoid consuming all handles}
1152 % \begin{macrocode}
1153 \AtBeginDocument{
1154 \typeout{Writing solutions to solution file \jobname.sol.tex}
1155 \newwrite\solutionstream
1156 \immediate\openout\solutionstream=\jobname.sol.tex
1157 \ifexsol@external
1158 \typeout{Writing exercises to exercise file \jobname.exc.tex}
1159 \newwrite\exercisestream
1160 \immediate\openout\exercisestream=\jobname.exc.tex
1161 \else
1162 \typeout{Using intermediate exercise file \jobname.exc.tex}
1163 \newwrite\exercisestream
1164 \fi
1165 \typeout{Writing formulae to formula collection file \jobname.fc.tex}
1166 \newwrite\formulacollectionstream
1167 \immediate\openout\formulacollectionstream=\jobname.fc.tex
1168 \typeout{Using intermediate formula file \jobname.for.tex}
1169 \newwrite\formulastream
1170 }
1171 \AtEndDocument{
1172 \immediate\closeout\formulacollectionstream
1173 \immediate\closeout\solutionstream
1174 }
1175 % \end{macrocode}
1176 %
1177 %
1178 % In local mode we also want to close the solutionstream, read it and
1179 % open it again:
1180 % \begin{macrocode}
1181 \newcommand\loadSolutions{
1182 \immediate\closeout\solutionstream
1183 \input{\jobname.sol.tex}
1184 % \immediate\openout\solutionstream=\jobname.sol.tex
1185 }
1186 % \end{macrocode}
1187 %
1188 % \subsection{Series counter}
1189 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1190 % By providing an exerciseseries counter, proper numbering of the
1191 % exercise series is provided. Note that separate series, render the
1192 % numbering of the exercises from document-global, to series-local,
1193 % therefore hindering the concordance of solutions to exercises.
1194 %
1195 % \changes{v1.2}{2016/05/05}{Added series counter}
1196 % \begin{macrocode}
1197 \newcounter{exerciseseries}[subsubsection]
1198 \setcounter{exerciseseries}{0}
1199 \renewcommand{\theexerciseseries}{\arabic{exerciseseries}}
1200 % \end{macrocode}
1201 %
1202 %
1203 % \subsection{Exercise counter}
1204 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1205 % By providing an exercise counter, proper numbering of the exercises
1206 % is provided to allow for good cross referencing of the solutions to
1207 % the exercises.
1208 % \changes{v0.2}{2012/01/06}{Removed dash in counter when in document
1209 % without sectioning commands}
1210 % \begin{macrocode}
1211 \newcounter{exercise}[exerciseseries]
1212 \setcounter{exercise}{0}
1213 \renewcommand{\theexercise}{%
1214 \ifexsol@local
1215 \arabic{exerciseseries}.\arabic{exercise}%
1216 \else
1217 \@ifundefined{c@chapter}{}{\if0\arabic{chapter}\else\arabic{chapter}.\fi}%
1218 \if0\arabic{section}\else\arabic{section}\fi%
1219 \if0\arabic{subsection}\else.\arabic{subsection}\fi%
1220 \if0\arabic{subsubsection}\else.\arabic{subsubsection}\fi%
1221 \if0\arabic{exercise}\else%
1222 \@ifundefined{c@chapter}%
1223 {\if0\arabic{section}\else-\fi}%
1224 {-}%
1225 \arabic{exercise}%
1226 \fi
1227 \fi
1228 }
1229 % \end{macrocode}
1230 %
1231 %
1232 % \subsection{Detokenization in order to cope with utf8}
1233 %
1234 % Combining old-school \LaTeX{} (before \XeTeX{} and \LuaTeX{}) and
1235 % UTF-8 is a pain.
1236 % Detokenization has been suggested by Geoffrey Poore to solve issues
1237 % with UTF-8 characters messing up the |fancyvrb| internals.
1238 % \changes{v0.7}{2014/07/14}{Added detokenized writing}
1239 % \changes{v1.0}{2014/09/13}{Added detokenized writing of formula and
1240 % formula collection stream}
1241 % \begin{macrocode}
1242 \newcommand{\GPES@write@detok}[1]{%
1243 \immediate\write\exercisestream{\detokenize{#1}}}%
1244 \newcommand{\GPSS@write@detok}[1]{%
1245 \immediate\write\solutionstream{\detokenize{#1}}}%
1246 \newcommand{\GPESS@write@detok}[1]{%
1247 \GPES@write@detok{#1}%
1248 \GPSS@write@detok{#1}}%
1249 \newcommand{\GPFORCOL@write@detok}[1]{%
1250 \immediate\write\formulacollectionstream{\detokenize{#1}}%
1251 \immediate\write\formulastream{\detokenize{#1}}}%
1252 \newcommand{\GPFORCOLONLY@write@detok}[1]{%
1253 \immediate\write\formulacollectionstream{\detokenize{#1}}}%
1254 % \end{macrocode}
1255 %
1256 %
1257 % \section{The user environments}
1258 %
1259 % \begin{macro}{exercise}
1260 % The |exercise| environment is used to typeset your
1261 % exercises, provide them with a nice label and allow for copying
1262 % the exercise to the solutions file (if the package option
1263 % |copyexercisesinsolution|) is set. The label can be
1264 % set by redefining the \cs{exercisename} macro, or by relying on
1265 % the \textsf{Babel} provisions. The code is almost litteraly
1266 % taken from the \textsf{fancyvrb} package.
1267 % \begin{macrocode}
1268 \def\exercise{\FV@Environment{}{exercise}}
1269 \def\FVB@exercise{%
1270 \refstepcounter{exercise}%
1271 \ifexsol@external\else
1272 \immediate\openout\exercisestream=\jobname.exc.tex
1273 \fi
1274 \ifexsol@local
1275 % \immediate\write\solutionstream{}
1276 \else
1277 % \immediate\write\solutionstream{\string\vspace*\string{2ex\string}%
1278 % \string\quad\string\newline}
1279 \fi
1280 \ifexsol@copyexercisesinsolutions
1281 \immediate\write\solutionstream{\string\begin{exsol@exercise}{\theexercise}}
1282 \fi
1283 \immediate\write\exercisestream{\string\begin{exsol@exercise}{\theexercise}}
1284 \@bsphack
1285 \begingroup
1286 \FV@UseKeyValues
1287 \FV@DefineWhiteSpace
1288 \def\FV@Space{\space}%
1289 \FV@DefineTabOut
1290 \ifexsol@copyexercisesinsolutions
1291 \let\FV@ProcessLine\GPESS@write@detok %
1292 \else
1293 \let\FV@ProcessLine\GPES@write@detok %
1294 \fi
1295 \relax
1296 \let\FV@FontScanPrep\relax
1297 \let\@noligs\relax
1298 \FV@Scan
1299 }
1300 \def\FVE@exercise{
1301 \endgroup\@esphack
1302 \immediate\write\exercisestream{\string\end{exsol@exercise}}
1303 \ifexsol@copyexercisesinsolutions
1304 \immediate\write\solutionstream{\string\end{exsol@exercise}}
1305 \fi
1306 \ifexsol@external\else
1307 \immediate\closeout\exercisestream
1308 \input{\jobname.exc.tex}
1309 \fi
1310 }
1311 \DefineVerbatimEnvironment{exercise}{exercise}{}
1312 % \end{macrocode}
1313 % \end{macro}
1314 %
1315 % \begin{macro}{exsol@exercise}
1316 % The |exsol@exercise| environment is an internal macro used
1317 % to typeset your exercises and provide them with a nice label and
1318 % number. Do not use it directly. Use the proper environment
1319 % |exercise| instead.
1320 % \changes{v0.2}{2012/01/06}{Attempted to fix MiKTeX formatting problems}
1321 % \changes{v0.3}{2012/01/08}{Fixed labelsep to avoid cluttered
1322 % itemize environments}
1323 % \changes{v0.4}{2012/01/06}{Added option exercisesinlist such that
1324 % default results in non list formatting of exercise}
1325 % \changes{v0.5}{2012/01/09}{Changed implementation to allow for
1326 % copying the exercises to the solutions file.}
1327 % \changes{v1.3}{2017/01/08}{Corrected formatting error in case of
1328 % options exerciseaslist}
1329 % \begin{macrocode}
1330 \newenvironment{exsol@exercise}[1]
1331 {%
1332 \ifthenelse{\boolean{exsol@minipage}}{\begin{minipage}[t]{\textwidth}}{}%
1333 \ifthenelse{\boolean{exsol@exerciseaslist}}
1334 {
1335 \begin{list}%
1336 {}
1337 {%
1338 \setlength{\topsep}{\exsolexercisetopbottomsep}%
1339 \setlength{\leftmargin}{\exsolexerciseleftmargin}%
1340 \setlength{\rightmargin}{\exsolexerciserightmargin}%
1341 \setlength{\listparindent}{\exsolexerciseparindent}%
1342 \setlength{\itemindent}{\exsolexerciseitemindent}%
1343 \setlength{\parsep}{\exsolexerciseparsep}
1344 \setlength{\labelsep}{\exsolexerciselabelsep}
1345 \setlength{\labelwidth}{\exsolexerciselabelwidth}}
1346 \item[\ifexsol@nolabels~#1:\else\exercisename{}~#1:\fi]%
1347 }
1348 {\ifexsol@nolabels #1:\else%
1349 \subparagraph{\exercisename{}~#1:}\fi}
1350 }
1351 {%
1352 \ifthenelse{\boolean{exsol@exerciseaslist}}%
1353 {\end{list}}{}%
1354 \ifthenelse{\boolean{exsol@minipage}}{\end{minipage}}{\par}%
1355 }
1356 % \end{macrocode}
1357 % \end{macro}
1358 %
1359 %
1360 % \begin{macro}{solution}
1361 % The |solution| environment is used to typeset your solutions
1362 % and provide them with a nice label and number that corresponds to
1363 % the exercise that preceeded this solution. Theno label can be
1364 % set by redefining the \cs{solutionname} macro, or by relying on
1365 % the \textsf{Babel} provisions. The code is almost litteraly
1366 % taken from the \textsf{fancyvrb} package.
1367 % \begin{macrocode}
1368 \def\solution{\FV@Environment{}{solution}}
1369 \def\FVB@solution{%
1370 % \typeout{Writing solution to \jobname.sol.tex}
1371 % WDSC
1372 \ifexsol@copyexercisesinsolutions
1373 \immediate\write\solutionstream{\string\begin{exsol@solution}{}}
1374 \else
1375 \ifexsol@inline
1376 \immediate\write\solutionstream{\string\begin{exsol@solution}{}}
1377 \else
1378 \immediate\write\solutionstream{\string\begin{exsol@solution}{\theexercise}}
1379 \fi
1380 \fi
1381 % \ifexsol@copyexercisesinsolutions
1382 % \immediate\write\solutionstream{\string\begin{exsol@solution}{}}
1383 % \else
1384 % \immediate\write\solutionstream{\string\begin{exsol@solution}{\theexercise}}
1385 % \fi
1386 \@bsphack
1387 \begingroup
1388 \FV@UseKeyValues
1389 \FV@DefineWhiteSpace
1390 \def\FV@Space{\space}%
1391 \FV@DefineTabOut
1392 \let\FV@ProcessLine\GPSS@write@detok %
1393 \relax
1394 \let\FV@FontScanPrep\relax
1395 \let\@noligs\relax
1396 \FV@Scan
1397 }
1398 \def\FVE@solution{
1399 \endgroup\@esphack
1400 \immediate\write\solutionstream{\string\end{exsol@solution}}
1401 \ifexsol@inline
1402 \immediate\closeout\solutionstream
1403 \input{\jobname.sol.tex}
1404 \immediate\openout\solutionstream=\jobname.sol.tex
1405 \fi
1406 }
1407 \DefineVerbatimEnvironment{solution}{solution}{}
1408 % \end{macrocode}
1409 % \end{macro}
1410 %
1411 % \begin{macro}{exsol@solution}
1412 % The |exsol@solution| environment is an internal macro used
1413 % to typeset your solutions. Do not use it directly. Use the proper
1414 % environment |solution| instead.
1415 % \changes{v1.2}{2016/05/05}{Added |exsol@solution| environment for
1416 % improved control on solution typesetting}
1417 % \begin{macrocode}
1418 \newenvironment{exsol@solution}[1]
1419 {%
1420 \ifthenelse{\boolean{exsol@minipage}}{\begin{minipage}[t]{\textwidth}}{}%
1421 \ifthenelse{\boolean{exsol@exerciseaslist}}
1422 {\begin{list}%
1423 {%
1424 }%
1425 {%
1426 \setlength{\topsep}{\exsolexercisetopbottomsep}%
1427 \setlength{\leftmargin}{\exsolexerciseleftmargin}%
1428 \setlength{\rightmargin}{\exsolexerciserightmargin}%
1429 \setlength{\listparindent}{\exsolexerciseparindent}%
1430 \setlength{\itemindent}{\exsolexerciseitemindent}%
1431 \setlength{\parsep}{\exsolexerciseparsep}
1432 \setlength{\labelsep}{\exsolexerciselabelsep}
1433 \setlength{\labelwidth}{\exsolexerciselabelwidth}}
1434 \item[\ifexsol@nolabels #1:\else%
1435 \solutionname{}\@ifmtarg{#1}{}{~}#1:\fi]
1436 }%
1437 {\ifexsol@nolabels #1:\else%
1438 \subparagraph{\solutionname{}\@ifmtarg{#1}{}{~}#1:}\fi}
1439 }
1440 {%
1441 \ifthenelse{\boolean{exsol@exerciseaslist}}%
1442 {\end{list}}{}%
1443 \ifthenelse{\boolean{exsol@minipage}}{\end{minipage}}{\par}%
1444 }
1445 % \end{macrocode}
1446 % \end{macro}
1447 %
1448 %
1449 % \begin{macro}{exercises}
1450 % The |exercises| environment helps typesetting your exercises to
1451 % stand out from the rest of the text. You may use it at the end of
1452 % a chapter, or just to group some exercises in the text.
1453 % \changes{v0.2}{2012/01/06}{Attempted to fix MiKTeX formatting problems}
1454 % \changes{v0.3}{2012/01/07}{Added some extra whitespace below
1455 % exercisesname}
1456 % \changes{v1.2}{2016/05/05}{Added multicolumn feature}
1457 % \begin{macrocode}
1458 \define@key{exercises}{columns}{\renewcommand\columncount{#1}}
1459 \define@key{exercises}{exsubrule}{\renewcommand\exsubrule{#1}}
1460 \define@key{exercises}{solsubrule}{\renewcommand\solsubrule{#1}}
1461 \define@key{exercises}{subrule}{\renewcommand\exsubrule{#1}\renewcommand\solsubrule{#1}}
1462 \newenvironment{exercises}[1][]
1463 {%
1464 \newcommand\columncount{1}% default
1465 \newcommand\exsubrule{}% default
1466 \newcommand\solsubrule{}% default
1467 \setkeys{exercises}{#1}%
1468 \exercisesfontsize\rule{.25\linewidth}{0.15mm}%
1469 \vspace*{-1.5\baselineskip}%
1470 \paragraph{\exercisesname}~\\*
1471 \ifthenelse{\columncount > 1}{\begin{multicols}{\columncount}}{}%
1472 }%
1473 {
1474 \ifthenelse{\columncount > 1}{\end{multicols}}{}\relax%
1475 \vspace*{-\baselineskip}\vspace*{\exsolexercisesbelowskip}%
1476 \exsubrule\par}
1477 % \end{macrocode}
1478 % \end{macro}
1479 %
1480 % \changes{v1.2}{2016/05/05}{Added exerciseseries environment}
1481 % \begin{macro}{exerciseseries}
1482 % The |exerciseseries| environment helps typesetting your
1483 % exercises in series.
1484 % \begin{macrocode}
1485 \define@key{exerciseseries}{columns}{\renewcommand\columncount{#1}}
1486 \define@key{exerciseseries}{exsubrule}{\renewcommand\exsubrule{#1}}
1487 \define@key{exerciseseries}{solsubrule}{\renewcommand\solsubrule{#1}}
1488 \define@key{exerciseseries}{subrule}{\renewcommand\exsubrule{#1}\renewcommand\solsubrule{#1}}
1489 \newenvironment{exerciseseries}[2][]
1490 {
1491 \refstepcounter{exerciseseries}%
1492 \newcommand\columncount{1} % default
1493 \newcommand\exsubrule{} % default
1494 \newcommand\solsubrule{} % default
1495 \setkeys{exerciseseries}{#1}%
1496 \paragraph{\seriesname~\theexerciseseries:~#2}~\par
1497 \ifthenelse{\columncount > 1}{\begin{multicols}{\columncount}}{}
1498 \ifexsol@inline\else
1499 \immediate\write\solutionstream{\string\begin\string{solutionseries\string}%
1500 \string[#1\string]\string{#2\string}\string{\theexerciseseries\string}}
1501 \fi
1502 }
1503 {
1504 \ifthenelse{\columncount > 1}{\end{multicols}}{}\relax
1505 \exsubrule\par
1506 \ifexsol@inline\else
1507 \immediate\write\solutionstream{\string\end\string{solutionseries\string}}
1508 \fi
1509 }
1510 % \end{macrocode}
1511 % \end{macro}
1512 % \changes{v1.2}{2016/05/05}{Added solutionseries environment}
1513 % \changes{v1.4}{2018/10/23}{. Implemented option to display
1514 % solutionserieslabels when option 'usersolutionserieslabels' is true}
1515 % \begin{macro}{solutionseries}
1516 % The |solutionseries| environment helps typesetting your
1517 % solutions in series. You don't need to use this function
1518 % explicitly. The package does this for you.
1519 % \begin{macrocode}
1520 \newenvironment{solutionseries}[3][]
1521 {
1522 \newcommand\columncount{1} % default
1523 \newcommand\exsubrule{} % default
1524 \newcommand\solsubrule{} % default
1525 \setkeys{exercises}{#1}%
1526 \paragraph{\seriesname~#3\ifexsol@usesolutionserieslabels: #2\fi}~\par
1527 \ifthenelse{\columncount > 1}{\begin{multicols}{\columncount}}{}
1528 }
1529 {
1530 \ifthenelse{\columncount > 1}{\end{multicols}}{}
1531 \solsubrule\par
1532 }
1533 % \end{macrocode}
1534 % \end{macro}
1535 %
1536 % \begin{macro}{informulacollection}
1537 % The |informulacollection| environment is used to write its
1538 % contents to the formula collection stream and load back into the
1539 % main text for typesetting. The code is almost litteraly
1540 % taken from the \textsf{fancyvrb} package.
1541 % \begin{macrocode}
1542 \def\informulacollection{\FV@Environment{}{informulacollection}}
1543 \def\FVB@informulacollection{%
1544 \immediate\openout\formulastream=\jobname.for.tex
1545 %\typeout{Writing formula to \jobname.for.tex and \jobname.fc.tex}
1546 \@bsphack
1547 \begingroup
1548 \FV@UseKeyValues
1549 \FV@DefineWhiteSpace
1550 \def\FV@Space{\space}%
1551 \FV@DefineTabOut
1552 \let\FV@ProcessLine\GPFORCOL@write@detok %
1553 \relax
1554 \let\FV@FontScanPrep\relax
1555 \let\@noligs\relax
1556 \FV@Scan
1557 }
1558 \def\FVE@informulacollection{
1559 \endgroup\@esphack
1560 \immediate\closeout\formulastream
1561 \input{\jobname.for.tex}
1562 }
1563 \DefineVerbatimEnvironment{informulacollection}{informulacollection}{}
1564 % \end{macrocode}
1565 % \end{macro}
1566 %
1567 % \begin{macro}{informulacollectiononly}
1568 % The |informulacollectiononly| environment is used to write its
1569 % contents to the formula collection stream \emph{without} loading
1570 % it back into the main text for typesetting. The code is almost litteraly
1571 % taken from the \textsf{fancyvrb} package.
1572 % \begin{macrocode}
1573 \def\informulacollectiononly{\FV@Environment{}{informulacollectiononly}}
1574 \def\FVB@informulacollectiononly{%
1575 %\typeout{Writing special to \jobname.fc.tex}
1576 \@bsphack
1577 \begingroup
1578 \FV@UseKeyValues
1579 \FV@DefineWhiteSpace
1580 \def\FV@Space{\space}%
1581 \FV@DefineTabOut
1582 \let\FV@ProcessLine\GPFORCOLONLY@write@detok %
1583 \relax
1584 \let\FV@FontScanPrep\relax
1585 \let\@noligs\relax
1586 \FV@Scan
1587 }
1588 \def\FVE@informulacollectiononly{
1589 \endgroup\@esphack
1590 }
1591 \DefineVerbatimEnvironment{informulacollectiononly}{informulacollectiononly}{}
1592 % \end{macrocode}
1593 % \end{macro}
1594 %
1595 % \subsection{Some Babel provisions}
1596 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1597 % \changes{v0.2}{2012/01/06}{Fixed babel errors}
1598 % \begin{macrocode}
1599 \newcommand{\exercisename}{Exercise}
1600 \newcommand{\exercisesname}{Exercises}
1601 \newcommand{\solutionname}{Solution}
1602 \newcommand{\solutionsname}{Solutions}
1603 \newcommand{\seriesname}{Series}
1604 % \end{macrocode}
1605 %
1606 %
1607 % You may redefine these macros, but to help you out a little bit, we
1608 % provide with some basic Babel auxiliaries. If you're a true polyglot
1609 % and are willing to help me out by providing translations for other
1610 % languages, I'm very willing to incorporate them into the code.
1611 %
1612 % \changes{v0.7}{2014/07/14}{Added Finnish language support}
1613 % \changes{v1.2}{2016/05/05}{Added Spanish language support}
1614 % \changes{v1.2}{2016/05/05}{Completed German language support
1615 % (i.e. new spelling ngerman) support}
1616 % \begin{macrocode}
1617 \addto\captionsdutch{%
1618 \renewcommand{\exercisename}{Oefening}%
1619 \renewcommand{\exercisesname}{Oefeningen}%
1620 \renewcommand{\solutionname}{Oplossing}%
1621 \renewcommand{\solutionsname}{Oplossingen}%
1622 \renewcommand{\seriesname}{Reeks}%
1623 }
1624 \addto\captionsgerman{%
1625 \renewcommand{\exercisename}{Aufgabe}%
1626 \renewcommand{\exercisesname}{Aufgaben}%
1627 \renewcommand{\solutionname}{L\"osung}%
1628 \renewcommand{\solutionsname}{L\"osungen}%
1629 \renewcommand{\seriesname}{Serie}%
1630 }
1631 \addto\captionsngerman{%
1632 \renewcommand{\exercisename}{Aufgabe}%
1633 \renewcommand{\exercisesname}{Aufgaben}%
1634 \renewcommand{\solutionname}{L\"osung}%
1635 \renewcommand{\solutionsname}{L\"osungen}%
1636 \renewcommand{\seriesname}{Serie}%
1637 }
1638 \addto\captionsfrench{%
1639 \renewcommand{\exercisename}{Exercice}%
1640 \renewcommand{\exercisesname}{Exercices}%
1641 \renewcommand{\solutionname}{Solution}%
1642 \renewcommand{\solutionsname}{Solutions}%
1643 \renewcommand{\seriesname}{Serie}%
1644 }
1645 \addto\captionsfinnish{
1646 \renewcommand{\exercisename}{Teht\"av\"a}%
1647 \renewcommand{\exercisesname}{Teht\"avi\"a}%
1648 \renewcommand{\solutionname}{Ratkaisu}%
1649 \renewcommand{\solutionsname}{Ratkaisut}%
1650 \renewcommand{\seriesname}{Sarja}
1651 }
1652 \addto\captionsspanish{%
1653 \renewcommand{\exercisename}{Ejercicio}%
1654 \renewcommand{\exercisesname}{Ejercicios}%
1655 \renewcommand{\solutionname}{Soluci\'on}%
1656 \renewcommand{\solutionsname}{Soluciones}%
1657 \renewcommand{\seriesname}{Serie}%
1658 }
1659 % \end{macrocode}
1660 %
1661 %
1662 %
1663 % Now the final hack overloads the basic sectioning commands to make
1664 % sure that they are copied into your solution book.
1665 %
1666 % \changes{v1.0}{2015/09/16}{Added congruence of chaptercounter of
1667 % main document and chapter counter of exercises document}
1668 % \changes{v1.1}{2015/09/16}{Corrected congruence of chaptercounter of
1669 % main document and chapter counter of exercises document (taking
1670 % intou account alphanumbered chapters}
1671 % \changes{v1.3}{2016/08/09}{Corrected counter in solutionstream}
1672 % \changes{v1.3}{2016/08/09}{Added macro to suppress chapter in
1673 % solution stream}
1674 % \changes{v1.5}{2019/01/02}{Added writing the sectioning code to the
1675 % exercise stream in external mode}
1676 % \changes{v1.7}{2025/02/14}{Changed makechapterhead into @chapter to avoid incompatibility with spelatex}
1677 % \begin{macrocode}
1678 \newif\ifnoexinchapter
1679 \noexinchapterfalse
1680 \ifexsol@local
1681 \else
1682 \ifx\chapter\@undefined\else
1683 \let\exsol@@chapter\@chapter
1684 \def\@chapter[#1]#2{%
1685 \exsol@@chapter[#1]{#2}
1686 \ifnoexinchapter
1687 \noexinchapterfalse
1688 \else
1689 \addtocounter{chapter}{-1}
1690 \immediate\write\solutionstream{\string\setcounter{chapter}{\arabic{chapter}}%
1691 \string\chapter{#1}}%
1692 \ifexsol@external
1693 \immediate\write\exercisestream{\string\setcounter{chapter}{\arabic{chapter}}%
1694 \string\chapter{#1}}%
1695 \fi
1696 \addtocounter{chapter}{1}
1697 \fi
1698 }
1699 \fi
1700
1701 \ifdefined\frontmatter
1702 \let\exsol@@frontmatter\frontmatter
1703 \def\frontmatter{%
1704 \immediate\write\solutionstream{\string\frontmatter}%
1705 \ifexsol@external%
1706 \immediate\write\exercisestream{\string\frontmatter}%
1707 \fi%
1708 \exsol@@frontmatter
1709 }
1710 \fi
1711 \ifdefined\frontmatter
1712 \let\exsol@@mainmatter\mainmatter
1713 \def\mainmatter{%
1714 \immediate\write\solutionstream{\string\mainmatter}%
1715 \ifexsol@external%
1716 \immediate\write\exercisestream{\string\mainmatter}%
1717 \fi%
1718 \exsol@@mainmatter
1719 }
1720 \fi
1721 \ifdefined\backmatter
1722 \let\exsol@@backmatter\backmatter
1723 \def\backmatter{%
1724 \immediate\write\solutionstream{\string\backmatter}%
1725 \ifexsol@external%
1726 \immediate\write\exercisestream{\string\backmatter}%
1727 \fi%
1728 \exsol@@backmatter
1729 }
1730 \fi
1731 \ifdefined\appendix
1732 \let\exsol@@appendix\appendix
1733 \def\appendix{%
1734 \immediate\write\solutionstream{\string\appendix}%
1735 \ifexsol@external%
1736 \immediate\write\exercisestream{\string\appendix}%
1737 \fi%
1738 \exsol@@appendix
1739 }
1740 \fi
1741 \fi
1742 % \end{macrocode}
1743 %
1744 % \begin{macro}{\noexercisesinnextchapter}
1745 % If you have chapters without exercises, you may want to leave them
1746 % out of your solution book. You can do this by putting the
1747 % |\noexercisesinnextchapter| macro before your chapter mark.
1748 % \begin{macrocode}
1749 \newcommand{\noexercisesinnextchapter}
1750 {
1751 \noexinchaptertrue
1752 }
1753 % \end{macrocode}
1754 % \end{macro}
1755 %
1756 % \begin{macro}{\noexercisesinnextchapter}
1757 % As an alternative you may just want to put this marker in your
1758 % text to cause the printing of the sentence ``No exercises in this
1759 % chapter'' in your solution book.
1760 % \begin{macrocode}
1761 \newcommand{\noexercisesinchapter}
1762 {
1763 \immediate\write\solutionstream{No exercises in this chapter}
1764 \ifexsol@external%
1765 \immediate\write\exercisestream{No exercises in this chapter}%
1766 \fi%
1767 }
1768 % \end{macrocode}
1769 % \end{macro}
1770 %
1771 % \begin{macrocode}
1772 %</package>
1773 % \end{macrocode}
1774 %
1775 % \bibliographystyle{alpha}
1776 %
1777 % \begin{thebibliography}{99}
1778 %
1779 % \bibitem{fancyvrb}
1780 % Timothy Van Zandt, Herbert Vo\ss, Denis Girou, Sebastian Rahtz, Niall
1781 % Mansfield
1782 % \newblock The \texttt{fancyvrb} package.
1783 % \newblock \url{http://ctan.org/pkg/fancyvrb}.
1784 % \newblock online, accessed in January 2012.
1785 %
1786 % \bibitem{CTAN}
1787 % The Comprehensive TeX Archive Network.
1788 % \newblock \url{http://www.ctan.org}.
1789 % \newblock online, accessed in January 2012.
1790 %
1791 % \end{thebibliography}
1792 %
1793 % \Finale
1794 \endinput