Debian Codegraph @

texmf-dist/source/latex/eqlist/eqlist.dtx

raw
1 % \def\fileversion{2.1}\def\filedate{2002/08/15}\def\docdate{2013/11/26}
2 %\iffalse These lines are necessary for the doc and docstrip utilities
3 %<*metainfo>
4
5 % With this package you can write lists with equal indentation.
6 % This package requires the eqparbox package.
7 %
8 % Author:
9 %
10 % M. V\"ath [email protected]
11 %
12 % The package may be distributed and/or modified under the conditions of
13 % the LaTeX Project Public License (version 1.3c or later).
14
15 %\fi
16 %
17 % \def\basename{eqlist}
18 %
19 %% \CharacterTable
20 %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
21 %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
22 %% Digits \0\1\2\3\4\5\6\7\8\9
23 %% Exclamation \! Double quote \" Hash (number) \#
24 %% Dollar \$ Percent \% Ampersand \&
25 %% Acute accent \' Left paren \( Right paren \)
26 %% Asterisk \* Plus \+ Comma \,
27 %% Minus \- Point \. Solidus \/
28 %% Colon \: Semicolon \; Less than \<
29 %% Equals \= Greater than \> Question mark \?
30 %% Commercial at \@ Left bracket \[ Backslash \\
31 %% Right bracket \] Circumflex \^ Underscore \_
32 %% Grave accent \` Left brace \{ Vertical bar \|
33 %% Right brace \} Tilde \~}
34 %
35 % \CheckSum{180}
36 %
37 % \newcommand{\cmdcite}[1]{\texttt{\textbackslash#1}}
38 % \newcommand{\envcite}[1]{\texttt{\{#1\}}}
39 % \newcommand{\optcite}[1]{\texttt{#1}}
40 % \newcommand{\filecite}[1]{\texttt{#1}}
41 % \newcommand{\bracemeta}[1]{\texttt{\{}\meta{#1}\texttt{\}}}
42 %
43 % \iffalse
44 % \RecordChanges
45 % \fi
46 % \def\ChangesTab{}\let\orichanges\changes
47 % \def\changes#1#2#3{\orichanges{#1}{#2}{#3}
48 % \expandafter\def\expandafter\ChangesTab\expandafter{\ChangesTab
49 % \item[v#1 {\mdseries(\emph{#2})}] {#3.}}}
50 %
51 % \changes{2.1}{2013/11/26}{Update email, add license. Date/version remains the
52 % same since only commments and documentation are modified}
53 % \changes{2.1}{2002/08/18}{Added \cmdcite{longitem} and the related
54 % \cmdcite{eqlistauto} mechanism. The latter was suggested by
55 % Rolf Niepraschk \texttt{[email protected]}. Changed default
56 % of \cmdcite{eqlistlabel} and gave some comments on spaces at the end of
57 % labels in the documentation. Documented special usage of
58 % \cmdcite{makelabel}}
59 % \changes{1.2}{2001/08/17}{Added the \envcite{Eqlist} and \envcite{Eqlist*}
60 % environments}
61 % \changes{1.1}{2001/08/16}{First release}
62 %
63 % \iffalse
64 %</metainfo>
65 %
66 % Everything between the following lines %<*driver> and %</driver> goes
67 % into the file eqlist.tex. Also, this is the only code executed, if
68 % this file here is run through latex.
69 %
70 %<*driver>
71 \documentclass{ltxdoc}
72 \OnlyDescription%% Comment this out, or
73 %%\AlsoImplementation%% uncomment this line, if you want to see the source.
74
75 %% If you want an index, uncomment one of the following lines.
76 %% After running latex a first time, you have to use
77 %% makeindex -s gind.ist eqlist
78 %% Then run latex again.
79 %%\CodelineIndex% comment this out if you want an index referring to codelines
80 %%\PageIndex% comment this out if you want an index referring to pages
81 %%\OldMakeindex% uncomment this line, if your MakeIndex is pre-v2.9
82
83 \setlength\hfuzz{15pt}
84 \hbadness=7000
85 \begin{document}
86 \DocInput{eqlist.dtx}
87 \end{document}
88 %</driver>
89 %<*metainfo>
90 % \fi
91 %
92 % \MakeShortVerb{"}
93 % \def\itemcmd#1{\item[\mdseries\texttt{\textbackslash#1}]}
94 %
95 % \title{The \texttt{eqlist} package\thanks
96 % {This package has version number \fileversion{}, last revised \filedate.
97 % The package may be distributed and/or modified under the conditions of the
98 % LaTeX Project Public License, either version 1.3c of this license or (at
99 % your option) any later version. The latest version of this license is in
100 % \texttt{http://www.latex-project.org/lppl.txt}, and version 1.3c or later
101 % is part of all distributions of LaTeX version 2005/12/01 or later.}}
102 % \author{Martin V\"ath\\{\texttt{[email protected]}}}
103 % \date{\docdate}
104 % \maketitle
105
106 % \begin{abstract}
107 % With this package you can write lists with equal indentation.
108 % This package requires the \filecite{eqparbox} package.
109 % \end{abstract}
110 %
111 % You may copy this package freely, as long as you distribute only unmodified
112 % and complete versions.
113 %
114 % \iffalse\tableofcontents\par\pagebreak\par\fi
115 %
116 % \section{Changes}
117 %
118 % \begin{description}
119 % \ChangesTab
120 % \end{description}
121 %
122 % \section{Description}
123 %
124 % This package provides a list environment which sets a description-like list
125 % but with the difference that the indentation corresponds to the longest item
126 % of the list. The usage is simply
127 % \begin{quote}
128 % \DescribeEnv{eqlist}"\begin{eqlist}["\meta{optional modifications}"]"\\
129 % "\item[First item] Text"\\
130 % "\item[Second item] Text"\\
131 % "\longitem[A special very long item] Text"\\
132 % \dots\\
133 % "\end{eqlist}"
134 % \end{quote}
135 % and there is also the environment \DescribeEnv{eqlist*}\envcite{eqlist*}
136 % which is similar but has slightly different defaults
137 % (which make the list appear more compact).
138 % There is also the alternative call
139 % \begin{quote}
140 % \DescribeEnv{Eqlist}"\begin{Eqlist}["\meta{optional modifications}"]"\relax
141 %\bracemeta{tag}\\
142 % "\item[First item] Text"\\
143 % "\item[Second item] Text"\\
144 % "\longitem[A special very long item] Text"\\
145 % \dots\\
146 % "\end{eqlist}"
147 % \end{quote}
148 % and a corresponding \DescribeEnv{Eqlist*}\envcite{Eqlist*} environment.\par
149 %
150 % All texts within the list are indented by the length of the largest label
151 % (i.e.\ "\item" entry) plus "\labelsep". For the "Eqlist" or "Eqlist*"
152 % environment, all lists with the same \meta{tag} are treated equally in the
153 % sense that the indentation of these lists is determined by the largest
154 % "\item" of all these lists. In this case, you may also use the \meta{tag}
155 % for the \filecite{eqparbox} package to read or modify the length of the
156 % largest "\item" (which is internally treated as a "\eqparbox").\par
157 %
158 % \DescribeMacro{\longitem}"\longitem" is like "\item", but the corresponding
159 % label is excluded from the calculation of the longest "\item".
160 % The intention of "\longitem" is to allow exceptionally long labels to
161 % occur without forcing a corresponding extreme indentation
162 % of the whole list. If you want \LaTeX\ to decide automatically
163 % whether "\longitem" or "\item" should be used, you can use the
164 % "\eqlistauto" mechanism which is described later.
165 %
166 % The \meta{optional modifications} are any commands which are used to
167 % initialize the list: You can modify here essentially the same variables as
168 % for any \LaTeXe\ list. If this argument is not given, the default
169 % initializations \DescribeMacro{\eqlistinit}"\eqlistinit" respectively
170 % \DescribeMacro{\eqliststarinit}"\eqliststarinit" (for \envcite{eqlist*}
171 % and \envcite{Eqlist*}) are used:
172 % You can just modify these definitions to change the defaults.
173 % If you have given the argument \meta{optional modifications} and additionally
174 % want to use the defaults, you have to include the command "\eqlistinit"
175 % respectively "\eqliststarinit" into the argument
176 % \meta{optional modifications} (see the examples below).\par
177 %
178 % The macros "\eqlistinit" and "\eqliststarinit" both call
179 % \DescribeMacro{\eqlistinitpar}"\eqlistinitpar" which sets the values for
180 % "\parindent" and "\parskip" to the values outside the list
181 % (this is not standard in \LaTeXe, but I prefer this style; if you do not like
182 % this, use "\let\eqlistinit\relax").
183 %
184 % Currently, this is all which is done by "\eqlistinit"; for
185 % "\eqliststarinit" additionally the values of
186 % \DescribeMacro{\topsep}"\topsep" and \DescribeMacro{\itemsep}"\itemsep" are
187 % set to $0$. Note that currently \DescribeMacro{\partopsep}"\partopsep" is
188 % not changed from the \LaTeXe\ default. Note that the latter is by default
189 % positive which means that if you are in vertical mode before the list
190 % (e.g.\ if you have a "\par" in front of the list), you get slightly more
191 % space above the list.\par
192 %
193 % Before \meta{optional modifications} (or "\eqlistinit" respectively
194 % "\eqliststarinit") are expanded, the length of the largest label is already
195 % stored in
196 % \DescribeMacro{\labelwidth}"\labelwidth" and
197 % \DescribeMacro{\leftmargin}"\leftmargin". After your modifications,
198 % \DescribeMacro{\labelsep}"\labelsep" is added to the actual value of
199 % "\leftmargin".
200 %
201 % As usual, the layout of "\item"s is done by the command
202 % \DescribeMacro{\makelabel}"\makelabel". If you want, you can change the
203 % default initialization of this command in the \meta{optional modifications}
204 % argument. However, it is \emph{not} admissible to redefine this macro
205 % within the list.
206 % If you really want to change the layout of "\item"s in the middle of a list,
207 % you can initialize "\makelabel" to expand to another command whose
208 % definition you can change within the list instead of "\makelabel"
209 % (an example will be given later).
210 % The default value of \DescribeMacro{\makelabel}"\makelabel" is the
211 % content of \DescribeMacro{\eqlistlabel}"\eqlistlabel" which in turn is
212 % by default defined with
213 % \begin{verbatim}
214 % \def\eqlistlabel#1{#1}\end{verbatim}
215 %
216 % In version 1.1 and 1.2 of this package, the default was different:
217 % A space was added at the end. This has been changed, because by a bug
218 % (or feature?) in "\eqparbox" spaces at the end of an "\item" are
219 % ignored anyway.
220 % If you want to force a space at the end which will not be ignored,
221 % you have to hide it in a box:
222 % \begin{verbatim}
223 % \def\eqlistlabel#1{\mbox{#1 }}\end{verbatim}
224 % will force a space at the end of every "\item".\bigskip
225 %
226 % There is a special mechanism provided which will automatically decide for
227 % an "\item" depending on the length of its label whether it is treated as
228 % normal or whether it should be treated like a "\longitem": If you want to
229 % use this mechanism, you only have to insert the command
230 % \begin{quote}
231 % \DescribeMacro{\eqlistauto}"\eqlistauto{"\meta{maximal length}"}"
232 % \end{quote}
233 % either inside the \meta{optional modifications} argument or within the list.
234 % Here, \meta{maximal length} must be in a format which can be used within
235 % \TeX's internal "\ifdim" command. It describes the maximal length of the
236 % label such that the corresponding "\item" will be treated as usual---for
237 % longer labels the corresponding "\item" will be treated as a "\longitem".
238 % If you want to switch off the "\eqlistauto"-mechanism again, you can use
239 % the command
240 % \begin{quote}
241 % \DescribeMacro{\eqlistnoauto}"\eqlistnoauto"
242 % \end{quote}
243 % The commands "\eqlistauto" and "\eqlistnoauto" need not occur in matching
244 % pairs, and they can also be used several times within the same list:
245 % Only the latest of the corresponding commands takes effect for a
246 % corresponding "\item".
247 %
248 % Unfortunately, the "\eqlistauto" mechanism has a disadvantage: As long as
249 % it is in effect, the corresponding "\makelabel"s for the "\item"s are
250 % always executed twice (once to calculate the length and once for the actual
251 % typesetting). This can cause problems if e.g.\ counters in "\item"s are
252 % increased.
253 %
254 % The "\eqlistauto" mechanism only effects the "\item" command, not
255 % "\longitem": Even if the "\eqlistauto" mechanism is active, you can use
256 % "\longitem" which will have its original meaning (independent of the
257 % length of the label). This means in particular that the "\makelabel" is
258 % executed only once by "\longitem", no matter whether the "\eqlistauto"
259 % mechanism is active or not.
260 %
261 % \section{Examples}
262 % \begin{verbatim}
263 % \begin{eqlist}[\eqliststarinit\def\makelabel#1{\bfseries#1:}\labelsep1em]
264 % \item[Short label] Descriptive text
265 % \item[A longer label] Descriptive text
266 % \longitem[An exceptionally long label] Descriptive text
267 % \item[Short again] Descriptive text
268 % \end{eqlist}\end{verbatim}
269 % will produce an output like\medskip\newline
270 % \begin{tabular}{@{}l@{}l}
271 % \bfseries Short label:\hspace{1em}\null&Descriptive text\\
272 % \bfseries A longer label:\hspace{1em}\null&Descriptive text\\
273 % \multicolumn{2}{@{}l}{{\bfseries An exceptionally
274 % long label:\hspace{1em}}\null Descriptive text}\\
275 % \bfseries Short again:\hspace{1em}\null&Descriptive text
276 % \end{tabular}\bigskip\par
277 %
278 % The same output can be obtained using the "\eqlistauto" mechanism
279 % \begin{verbatim}
280 % \begin{eqlist}[\eqliststarinit
281 % \def\makelabel#1{\bfseries#1:}\labelsep1em\eqlistauto{3cm}]
282 % \item[Short label] Descriptive text
283 % \item[A longer label] Descriptive text
284 % \item[An exceptionally long label] Descriptive text
285 % \item[Short again] Descriptive text
286 % \end{eqlist}\end{verbatim}
287 % or by using the "\eqlistauto" mechanism only locally:
288 % \begin{verbatim}
289 % \begin{eqlist}[\eqliststarinit\def\makelabel#1{\bfseries#1:}\labelsep1em]
290 % \item[Short label] Descriptive text
291 % \item[A longer label] Descriptive text
292 % \eqlistauto{0pt}
293 % \item[An exceptionally long label] Descriptive text
294 % \eqlistnoauto
295 % \item[Short again] Descriptive text
296 % \end{eqlist}\end{verbatim}
297 %
298 % The next example demonstrates how one can change the layout of labels
299 % within the list. Recall that it is forbidden to redefine "\makelabel".
300 % \begin{verbatim}
301 % \begin{eqlist}[\eqliststarinit
302 % \def\mylabel#1{\bfseries#1:}\def\makelabel{\mylabel}\labelsep1em]
303 % \item[First label] Descriptive text
304 % \item[Second label] Descriptive text
305 % \def\mylabel#1{\slshape#1:}
306 % \item[First new-style label] Descriptive text
307 % \longitem[Second new-style label which is long] Descriptive text
308 % \end{eqlist}\end{verbatim}
309 % The above example will produce an output as follows.\bigskip\newline
310 % \begin{tabular}{@{}l@{}l}
311 % \bfseries First label:\hspace{1em}\null&Descriptive text\\
312 % \bfseries Second label:\hspace{1em}\null&Descriptive text\\
313 % \slshape First new-style label:\hspace{1em}\null&Descriptive text\\
314 % \multicolumn{2}{@{}l}{{\slshape Second new-style label
315 % which is long:\hspace{1em}}\null Descriptive text}
316 % \end{tabular}
317 %
318 % \iffalse
319 %</metainfo>
320 % \fi
321 % \iffalse--------------------------------------------------------------\fi
322 % \StopEventually{\PrintChanges}
323 % \section{Implementation}
324 %
325 % \newcommand{\nocomment}{}
326 % \setcounter{CodelineNo}{0}
327 % \iffalse--------------------------------------------------------------
328 %
329 %
330 %<*eqlist>
331 % \fi
332 % \begin{macrocode}
333
334 \typeout{eqlist.sty by M. Vaeth: Revision 2.1}
335 \NeedsTeXFormat{LaTeX2e}
336 \ProvidesPackage{eqlist}[2002/08/15 v2.1]
337
338 \RequirePackage{eqparbox}
339
340 % \end{macrocode}
341 % \begin{macro}{eqlist}\nocomment
342 % \begin{macrocode}
343 \newenvironment{eqlist}[1][\eqlistinit]{\eql@start{#1}}{\eql@end}
344 % \end{macrocode}
345 % \end{macro}
346 % \begin{macro}{eqlist*}\nocomment
347 % \begin{macrocode}
348 \newenvironment{eqlist*}[1][\eqliststarinit]{\eql@start{#1}}{\eql@end}
349 % \end{macrocode}
350 % \end{macro}
351 % \begin{macro}{Eqlist}\nocomment
352 % \begin{macrocode}
353 \newenvironment{Eqlist}[2][\eqlistinit]{\eql@startp{#1}{#2}}{\eql@end}
354 % \end{macrocode}
355 % \end{macro}
356 % \begin{macro}{Eqlist*}\nocomment
357 % \begin{macrocode}
358 \newenvironment{Eqlist*}[2][\eqliststarinit]{\eql@startp{#1}{#2}}{\eql@end}
359
360 % \end{macrocode}
361 % \end{macro}
362 % \begin{macro}{\eqlistinitpar}\nocomment
363 % \begin{macrocode}
364 \ifx\eqlistinitpar\undefined
365 \def\eqlistinitpar{\relax\listparindent\parindent\relax\parsep\parskip\relax}
366 \fi
367 % \end{macrocode}
368 % \end{macro}
369 % \begin{macro}{\eqlistinit}\nocomment
370 % \begin{macrocode}
371 \ifx\eqlistinit\undefined
372 \def\eqlistinit{\eqlistinitpar}
373 \fi
374 % \end{macrocode}
375 % \end{macro}
376 % \begin{macro}{\eqliststarinit}\nocomment
377 % \begin{macrocode}
378 \ifx\eqliststarinit\undefined
379 \def\eqliststarinit{\topsep0pt\relax\itemsep0pt\relax%\partopsep0pt\relax
380 \eqlistinitpar}
381 \fi
382 % \end{macrocode}
383 % \end{macro}
384 % \begin{macro}{\eqlistlabel}\nocomment
385 % \begin{macrocode}
386 \ifx\eqlistlabel\undefined
387 \def\eqlistlabel#1{#1}
388 \fi
389
390 % \end{macrocode}
391 % \end{macro}
392 % \begin{macro}{\eql@cnt}
393 % The counter "\eql@cnt" is used to generate ``unique'' names for the labels.
394 % \begin{macrocode}
395 \newcount\eql@cnt\relax\eql@cnt=0
396
397 % \end{macrocode}
398 % \end{macro}
399 % \begin{macro}{\eql@start}
400 % The macro "\eql@start" advances the counter "\eql@cnt" (globally!) and then
401 % starts a list, where for the initialization "\eql@mainprep" is called with
402 % the corresponding ``unique'' name and the argument.
403 % \begin{macrocode}
404 \long\def\eql@start#1{\global\advance\eql@cnt by1\begin{list}{}{\expandafter
405 \eql@mainprepn\expandafter{\romannumeral\eql@cnt}{#1}}}
406 % \end{macrocode}
407 % \end{macro}
408 % \begin{macro}{\eql@startp}
409 % The macro "\eql@startp" is similar to "\eql@start" with the difference that
410 % the first argument is used as the ``unique'' name instead of a counter.
411 % Thus, "\eql@startp" starts a list, where for the initialization
412 % "\eql@mainprep" is used with the corresponding arguments.
413 % \begin{macrocode}
414 \long\def\eql@startp#1#2{\begin{list}{}{\eql@mainprep{#2}{#1}}}
415 % \end{macrocode}
416 % \end{macro}
417 % \begin{macro}{\eql@end}
418 % \begin{macrocode}
419 \def\eql@end{\end{list}}
420
421 % \end{macrocode}
422 % \end{macro}
423 % \begin{macro}{\eql@mainprep}
424 % In "\eql@mainprep", we allow the environment-specific commands and
425 % initialize
426 % \begin{macro}{\eql@makelabel}"\eql@makelabel"\end{macro}
427 % which will become later our actual "\makelabel".
428 % We also save this definition into
429 % \begin{macro}{\eql@normal}"\eql@normal"\end{macro}
430 % and (as always if "\eql@makelabel" is changed non-temporary) we also save it
431 % into
432 % \begin{macro}{\eql@current}"\eql@current".\end{macro}
433 % Finally, "\makelabel" is initialized to "\eqlistlabel", and the
434 % length of the label (and the left margin) is initialized with
435 % the length of the corresponding eqparbox with the ``unique'' name "#1".
436 % Then the (default or user) initialization "#2" is executed.
437 % After this, "\makelabel" is replaced by "\eql@makelabel". The
438 % ``user'' definition of "\makelabel" is before saved into
439 % \begin{macro}{\eql@long}"\eql@long".\end{macro}
440 % \begin{macrocode}
441 \long\def\eql@mainprep#1#2{\let\longitem\eql@longitem
442 \let\eqlistauto\eql@auto
443 \let\eqlistnoauto\eql@noauto
444 \def\eql@makelabel##1{\eqparbox[b]{#1}{\eql@long{##1}}\hfil}%
445 \let\eql@normal\eql@makelabel
446 \let\eql@current\eql@makelabel
447 \setlength{\labelwidth}{\eqboxwidth{#1}}%
448 \setlength{\leftmargin}{\labelwidth}%
449 \let\makelabel\eqlistlabel
450 #2\addtolength{\leftmargin}{\labelsep}%
451 \let\eql@long\makelabel\def\makelabel{\eql@makelabel}}
452 % \end{macrocode}
453 % \end{macro}
454 % \begin{macro}{\eql@mainprepn}
455 % Despite of its definition, "\eql@mainprepn" actually expects two arguments:
456 % "\eql@mainprepn" does the same as "\eql@mainprep" with the difference that
457 % the first argument should be a unique roman number instead of a ``unique''
458 % name: The actual name is then obtained by prepending the text "eqlistbox"
459 % to the number. Note that the number must actually be roman, since otherwise
460 % (some release(s) of) the \filecite{eqparbox} package becomes confused.
461 % \begin{macrocode}
462 \def\eql@mainprepn#1{\eql@mainprep{eqlistbox#1}}
463
464 % \end{macrocode}
465 % \end{macro}
466 % \begin{macro}{\longitem}
467 % "\longitem" is essentially a call of "\item" with the difference that we
468 % redefine "\eql@makelabel" temporarily. To avoid usage outside of the intended
469 % environment, the actual code is put into
470 % \begin{macro}{\eql@longitem}"\eql@longitem".\end{macro}
471 % \begin{macrocode}
472 \newcommand{\longitem}{\eql@illlegal\longitem\item}
473 \def\eql@longitem[#1]{\let\eql@makelabel\eql@long
474 \item[#1]\let\eql@makelabel\eql@current}
475
476 % \end{macrocode}
477 % \end{macro}
478 % \begin{macro}{\eqlistauto}
479 % To avoid usage outside of the intended environment,
480 % the actual code is put into
481 % \begin{macro}{\eql@auto}"\eql@auto".\end{macro}
482 % \begin{macrocode}
483 \newcommand{\eqlistauto}[1]{\eql@illegal\eqlistauto}
484 \def\eql@auto#1{\def\eql@makelabel##1{\setbox0\hbox{\eql@long{##1}}%
485 \ifdim#1>\wd0\relax
486 \expandafter\eql@normal
487 \else
488 \expandafter\eql@long
489 \fi{##1}}%
490 \let\eql@current\eql@makelabel}
491 % \end{macrocode}
492 % \end{macro}
493 % \begin{macro}{\eqlistnoauto}
494 % To avoid usage outside of the intended environment,
495 % the actual code is put into
496 % \begin{macro}{\eql@noauto}"\eql@noauto".\end{macro}
497 % \begin{macrocode}
498 \newcommand{\eqlistnoauto}{\eql@illegal\eqlistnoauto}
499 \def\eql@noauto{\let\eql@makelabel\eql@normal\let\eql@current\eql@makelabel}
500 % \end{macrocode}
501 % \end{macro}
502 % \begin{macro}{\eql@illegal}
503 % Write error message in case a command is used outside of the intended
504 % environment.
505 % \begin{macrocode}
506 \def\eql@illegal#1{\errmessage{\string#1
507 can only be used in eqlist or Eqlist environment}}
508
509 % \end{macrocode}
510 % \end{macro}
511 % \iffalse
512 %</eqlist>
513 % \fi
514 %
515 % \Finale\PrintIndex
516 %
517 % \iffalse
518 %<*metainfo>
519 % \fi
520 \iffalse -------------------------------------------------------------
521 %
522 % Just in case that for some reason the file `eqlist.ins' got lost:
523 % The content of this file is between the lines %<*insfile> and %</insfile>:
524 %
525 %\iffalse
526 %</metainfo>
527 %<*insfile>
528 \def\batchfile{eqlist.ins}
529 \input docstrip.tex
530 \keepsilent
531 \nopreamble
532 \generateFile{eqlist.sty}{f}{\from{eqlist.dtx}{eqlist}}
533 \generateFile{eqlist.tex}{f}{\from{eqlist.dtx}{driver}}
534 %%\generateFile{eqlist.ins.dup}{f}{\from{eqlist.dtx}{insfile}}
535
536 \Msg{***************************************************************}
537 \Msg{*}
538 \Msg{* To finish the installation, you have to move the}
539 \Msg{* file 'eqlist.sty' in a directory searched by TeX.}
540 \Msg{*}
541 \Msg{*}
542 \Msg{* Run the file 'eqlist.tex' through LaTeX to produce the}
543 \Msg{* documentation}
544 \Msg{*}
545 \Msg{*}
546 \Msg{***************************************************************}
547 \endbatchfile
548 %</insfile>
549 %<*metainfo>
550 % \fi
551 \fi
552 % \iffalse
553 %</metainfo>
554 % \fi
555 \endinput
556
557 %%% Local Variables:
558 %%% mode: latex
559 %%% TeX-master: "eqlist.tex"
560 %%% End: