| 1 |
% \iffalse meta-comment |
| 2 |
% epigraph.dtx |
| 3 |
% Author: Peter Wilson, Herries Press |
| 4 |
% Maintainer: Will Robertson (will dot robertson at latex-project dot org) |
| 5 |
% Copyright 1998--2004 Peter R. Wilson |
| 6 |
% Copyright 2011 Will Robertson |
| 7 |
% |
| 8 |
% This work may be distributed and/or modified under the |
| 9 |
% conditions of the LaTeX Project Public License, either |
| 10 |
% version 1.3c of this license or (at your option) any |
| 11 |
% later version: <http://www.latex-project.org/lppl.txt> |
| 12 |
% |
| 13 |
% This work has the LPPL maintenance status "maintained". |
| 14 |
% The Current Maintainer of this work is Will Robertson. |
| 15 |
% |
| 16 |
% This work consists of the files listed in the README file. |
| 17 |
% |
| 18 |
% |
| 19 |
%<*driver> |
| 20 |
\documentclass{ltxdoc} |
| 21 |
\EnableCrossrefs |
| 22 |
\CodelineIndex |
| 23 |
\setcounter{StandardModuleDepth}{1} |
| 24 |
\begin{document} |
| 25 |
\DocInput{epigraph.dtx} |
| 26 |
\end{document} |
| 27 |
%</driver> |
| 28 |
% |
| 29 |
% \fi |
| 30 |
% |
| 31 |
% \CheckSum{244} |
| 32 |
% |
| 33 |
% \DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath} |
| 34 |
% \DoNotIndex{\@centercr,\@cite} |
| 35 |
% \DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue} |
| 36 |
% \DoNotIndex{\@input,\@ixpt,\@m} |
| 37 |
% \DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint} |
| 38 |
% \DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb} |
| 39 |
% \DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt} |
| 40 |
% \DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt} |
| 41 |
% \DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace} |
| 42 |
% \DoNotIndex{\advance,\Alph,\alph} |
| 43 |
% \DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box} |
| 44 |
% \DoNotIndex{\bullet} |
| 45 |
% \DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption} |
| 46 |
% \DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass} |
| 47 |
% \DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist} |
| 48 |
% \DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} |
| 49 |
% \DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter} |
| 50 |
% \DoNotIndex{\fbox} |
| 51 |
% \DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef} |
| 52 |
% \DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} |
| 53 |
% \DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi} |
| 54 |
% \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi} |
| 55 |
% \DoNotIndex{\input} |
| 56 |
% \DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark} |
| 57 |
% \DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright} |
| 58 |
% \DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} |
| 59 |
% \DoNotIndex{\NeedsTeXFormat,\newdimen} |
| 60 |
% \DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number} |
| 61 |
% \DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@} |
| 62 |
% \DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip} |
| 63 |
% \DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} |
| 64 |
% \DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} |
| 65 |
% \DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} |
| 66 |
% \DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman} |
| 67 |
% \DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength} |
| 68 |
% \DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space} |
| 69 |
% \DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase} |
| 70 |
% \DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt} |
| 71 |
% \DoNotIndex{\viipt,\vipt,\vskip,\vspace} |
| 72 |
% \DoNotIndex{\wd,\xiipt,\year,\z@} |
| 73 |
% |
| 74 |
% \changes{v1.0}{1998/11/15}{First public release} |
| 75 |
% \changes{v1.1}{1998/11/29}{Added epigraphs before chapter headings} |
| 76 |
% \changes{v1.2}{1999/09/12}{Added cleartoevenpage and extended documentation} |
| 77 |
% \changes{v1.2a}{1999/12/01}{Extended documentation for epigraphs on Part pages} |
| 78 |
% \changes{v1.3}{1999/12/01}{Added \cs{dropchapter} and \cs{undodrop} commands} |
| 79 |
% \changes{v1.4}{2000/01/16}{Added flushleftright environment} |
| 80 |
% \changes{v1.5}{2000/02/20}{Generalised \cs{cleartoevenpage} command} |
| 81 |
% \changes{v1.5a}{2002/10/22}{Fixed class with ccaption package} |
| 82 |
% \changes{v1.5b}{2004/04/22}{Updated license and contact details} |
| 83 |
% \changes{v1.5c}{2009/09/02}{New maintainer (Will Robertson)} |
| 84 |
% \changes{v1.5d}{2011/08/07}{Load package `nextpage' for \cs{cleartoevenpage}} |
| 85 |
% |
| 86 |
% \def\dtxfile{epigraph.dtx} |
| 87 |
% \def\fileversion{v1.5} \def\filedate{2000/02/20} |
| 88 |
% \def\fileversion{v1.5a} \def\filedate{2002/10/22} |
| 89 |
% \def\fileversion{v1.5b} \def\filedate{2004/04/22} |
| 90 |
% \def\fileversion{v1.5c} \def\filedate{2009/09/02} |
| 91 |
% \def\fileversion{v1.5d} \def\filedate{2011/08/07} |
| 92 |
% \def\fileversion{v1.5e} \def\filedate{2020/01/02} |
| 93 |
% \newcommand*{\Lpack}[1]{\textsf {#1}} ^^A typeset a package |
| 94 |
% \newcommand*{\Lopt}[1]{\textsf {#1}} ^^A typeset an option |
| 95 |
% \newcommand*{\file}[1]{\texttt {#1}} ^^A typeset a file |
| 96 |
% \newcommand*{\Lcount}[1]{\textsl {\small#1}} ^^A typeset a counter |
| 97 |
% \newcommand*{\pstyle}[1]{\textsl {#1}} ^^A typeset a pagestyle |
| 98 |
% \newcommand*{\Lenv}[1]{\texttt {#1}} ^^A typeset an environment |
| 99 |
% ^^A fake a rhsepigraph for demo purposes |
| 100 |
% \newcommand{\tepi}[2]{\vspace{.5\baselineskip}\begin{flushright}\small |
| 101 |
% \begin{minipage}{2.5in} |
| 102 |
% \begin{minipage}{2.5in}\begin{flushleft} #1\\ |
| 103 |
% \rule[.5ex]{2.5in}{.4pt} |
| 104 |
% \end{flushleft}\end{minipage} \\ |
| 105 |
% \begin{minipage}{2.5in}\begin{flushright} #2 |
| 106 |
% \end{flushright}\end{minipage} |
| 107 |
% \end{minipage}\end{flushright}\vspace{.5\baselineskip}} |
| 108 |
% |
| 109 |
% \title{The \Lpack{epigraph} package\thanks{This |
| 110 |
% file (\texttt{\dtxfile}) has version number \fileversion, last revised |
| 111 |
% \filedate.}} |
| 112 |
% |
| 113 |
% \author{% |
| 114 |
% Author: Peter Wilson, Herries Press\\ |
| 115 |
% Maintainer: Will Robertson\\ |
| 116 |
% \texttt{will dot robertson at latex-project dot org} |
| 117 |
% } |
| 118 |
% \date{\fileversion\qquad\filedate} |
| 119 |
% \maketitle |
| 120 |
% \begin{abstract} |
| 121 |
% The \Lpack{epigraph} package can be used to typeset a relevant |
| 122 |
% quotation or saying as an \emph{epigraph}, usually just after a |
| 123 |
% sectional heading. Various handles are provided to tweak the appearance. |
| 124 |
% \end{abstract} |
| 125 |
% \tableofcontents |
| 126 |
% |
| 127 |
% \StopEventually{} |
| 128 |
% |
| 129 |
% |
| 130 |
% |
| 131 |
% \section{Introduction} |
| 132 |
% |
| 133 |
% \tepi{My soul, seek not the life of immortals; but enjoy to the full |
| 134 |
% the resources that are within your reach} |
| 135 |
% {\textit{Pythian Odes \\ Pindar}} |
| 136 |
% |
| 137 |
% Some authors like to add an interesting quotation at either the start |
| 138 |
% or end of a section. The \Lpack{epigraph} package provides commands |
| 139 |
% to assist in the typesetting of a single epigraph. Other authors like to |
| 140 |
% add many such quotations and the package provides environments to |
| 141 |
% cater for these as well. |
| 142 |
% |
| 143 |
% This manual is typeset according to the conventions of the |
| 144 |
% \LaTeX{} \textsc{docstrip} utility which enables the automatic |
| 145 |
% extraction of the \LaTeX{} macro source files~\cite{GOOSSENS94}. |
| 146 |
% |
| 147 |
% Section~\ref{sec:usc} describes the usage of the package. |
| 148 |
% Commented source code for the package is in Section~\ref{sec:code}. |
| 149 |
% |
| 150 |
% \section{The \Lpack{epigraph} package} \label{sec:usc} |
| 151 |
% |
| 152 |
% \tepi{The whole is more than the sum of the parts.} |
| 153 |
% {\textit{Metaphysica \\ Aristotle}} |
| 154 |
% |
| 155 |
% The \Lpack{epigraph} package provides commands for typesetting |
| 156 |
% a single epigraph and environments for typesetting a list of epigraphs. |
| 157 |
% Epigraphs can be typeset at either the left, the center or the right of |
| 158 |
% the typeblock. A few example epigraphs are exhibited here, and |
| 159 |
% others can be found in an article by |
| 160 |
% Christina Thiele~\cite{TTC199}. |
| 161 |
% |
| 162 |
% \subsection{The \texttt{epigraph} command} |
| 163 |
% |
| 164 |
% The original inspiration for |\epigraph| was Doug Schenck's |
| 165 |
% for the epigraphs in our book~\cite{EBOOK}. That was hard wired for |
| 166 |
% the purpose at hand. The version here provides much more flexibility. |
| 167 |
% |
| 168 |
% |
| 169 |
% |
| 170 |
% \DescribeMacro{\epigraph} |
| 171 |
% The command |\epigraph{|\meta{text}|}{|\meta{source}|}| |
| 172 |
% typesets |
| 173 |
% an epigraph using \meta{text} as the main text of the epigraph and |
| 174 |
% \meta{source} being the original author (or book, article, etc.) |
| 175 |
% of the quoted text. By default the epigraph is placed at the right hand |
| 176 |
% side of the textblock, and the \meta{source} is typeset at the bottom |
| 177 |
% right of the \meta{text}. |
| 178 |
% |
| 179 |
% |
| 180 |
% \subsection{The \texttt{epigraphs} environment} |
| 181 |
% |
| 182 |
% \DescribeEnv{epigraphs} |
| 183 |
% The |epigraphs| environment typesets a list of epigraphs, and by default |
| 184 |
% places them at the right hand side of the textblock. |
| 185 |
% |
| 186 |
% \DescribeMacro{\qitem} |
| 187 |
% Each epigraph in the list is specified by a |
| 188 |
% |\qitem{|\meta{text}|}{|\meta{source}|}| command (analogous to the |\item| |
| 189 |
% command in ordinary list environments). |
| 190 |
% By default, the \meta{source} is typeset at the bottom right of the |
| 191 |
% \meta{text}. |
| 192 |
% |
| 193 |
% |
| 194 |
% |
| 195 |
% \subsection{General} |
| 196 |
% |
| 197 |
% \tepi{Example is the school of mankind, and they will learn at no other.} |
| 198 |
% {\textit{Letters on a Regicide Peace}\\ \textsc{Edmund Burke}} |
| 199 |
% |
| 200 |
% The commands described in this section apply to both the |\epigraph| |
| 201 |
% command and the |epigraphs| environment. |
| 202 |
% |
| 203 |
% An epigraph immediately after a heading will cause the first paragraph |
| 204 |
% of the following text to be indented. |
| 205 |
% If you want the initial paragraph |
| 206 |
% to have no indentation, then start it with the |\noindent| command, or |
| 207 |
% \DescribeMacro{\epigraphnoindent} |
| 208 |
% add |\epigraphnoindent| to your document preamble. |
| 209 |
% (|\epigraphnoindentfalse| will reverse the setting.) |
| 210 |
% This command only affects the |\epigraph| command; for the |epigraphs| environment |
| 211 |
% the |\noindent| approach must still be used. |
| 212 |
% |
| 213 |
% \DescribeMacro{\epigraphwidth} |
| 214 |
% The epigraphs are typeset in a minipage of width |\epigraphwidth|. The default |
| 215 |
% value for this can be changed using the |\setlength| command. Typically, |
| 216 |
% epigraphs are typeset in a measure much less than the width of the textblock. |
| 217 |
% |
| 218 |
% \DescribeMacro{\textflush} |
| 219 |
% In order to avoid bad line breaks, the \meta{text} is normally typeset |
| 220 |
% ragged right. |
| 221 |
% The |\textflush| command controls the \meta{text} typesetting style, |
| 222 |
% and it can be redefined from its default value of |
| 223 |
% \texttt{flushleft} (which produces ragged right). The sensible values |
| 224 |
% are \texttt{center} for centered text, \texttt{flushright} for ragged left |
| 225 |
% text, and \texttt{flushepinormal} for normal justified text. |
| 226 |
% |
| 227 |
% If by any chance you want the \meta{text} to be typeset in some |
| 228 |
% other layout style, the easiest |
| 229 |
% way to do this is by defining a new environment which sets the paragraphing |
| 230 |
% parameters to your desired values. For example, as the \meta{text} is |
| 231 |
% typeset in a minipage, there is no paragraph indentation. If you |
| 232 |
% want the paragraphs to be indented and justified then define |
| 233 |
% a new environment like:\\ |
| 234 |
% |\newenvironment{myparastyle}{\setlength{\parindent}{1em}}{}| \\ |
| 235 |
% and use it as: \\ |
| 236 |
% |\renewcommand{\textflush}{myparastyle}|. |
| 237 |
% |
| 238 |
% \DescribeMacro{\epigraphflush} |
| 239 |
% As noted, the default position of epigraphs is at the right hand side |
| 240 |
% of the textblock. The positioning is controlled by |\epigraphflush| |
| 241 |
% whose default value is \texttt{flushright}. This can be changed |
| 242 |
% to \texttt{flushleft} for positioning at the left hand side or to |
| 243 |
% \texttt{center} for positioning at the center of the textblock. |
| 244 |
% |
| 245 |
% \DescribeMacro{\sourceflush} |
| 246 |
% The |\sourceflush| command controls the position of the \meta{source}. |
| 247 |
% The default value is \texttt{flushright}. It can be changed to |
| 248 |
% \texttt{flushleft}, \texttt{center} or \texttt{flushepinormal}. |
| 249 |
% |
| 250 |
% For example, to have epigraphs centered with the \meta{source} at the left, |
| 251 |
% add the following to your |
| 252 |
% document (after loading the \Lpack{epigraph} package): |
| 253 |
% \begin{verbatim} |
| 254 |
% \renewcommand{\epigraphflush}{center} |
| 255 |
% \renewcommand{\sourceflush}{flushleft} |
| 256 |
% \end{verbatim} |
| 257 |
% |
| 258 |
% \DescribeMacro{\epigraphsize} |
| 259 |
% Epigraphs are often typeset in a smaller font than the main text. The |
| 260 |
% |\epigraphsize| command sets the font size to be used. |
| 261 |
% If you don't like the default value, change it by redefining the command, |
| 262 |
% for example: \\ |
| 263 |
% | \renewcommand{\epigraphsize}{\footnotesize}| |
| 264 |
% |
| 265 |
% \DescribeMacro{\epigraphrule} |
| 266 |
% By default, a rule is drawn between the \meta{text} and \meta{source}, |
| 267 |
% with the rule thickness being given by the value of |\epigraphrule|. |
| 268 |
% The value can be changed by using the \LaTeX{} |\setlength| command. |
| 269 |
% A value of \texttt{0pt} will eliminate the rule. Personally, I dislike |
| 270 |
% the rule in the list environments. |
| 271 |
% |
| 272 |
% \DescribeMacro{\beforeepigraphskip} |
| 273 |
% \DescribeMacro{\afterepigraphskip} |
| 274 |
% The two |...skip| commands specify the amount of vertical space inserted |
| 275 |
% before and after typeset epigraphs. Again, these can be changed by |
| 276 |
% |\setlength|. It is desirable that the sum of their values should be an |
| 277 |
% integer multiple of the |\baselineskip|. |
| 278 |
% |
| 279 |
% Note that you can use normal \LaTeX{} commands in the \meta{text} and |
| 280 |
% \meta{source} arguments. You may wish to use different fonts for the |
| 281 |
% \meta{text} (say roman) and the \meta{source} (say italic). |
| 282 |
% |
| 283 |
% The epigraph at the start of this section can be specified as: |
| 284 |
% \begin{verbatim} |
| 285 |
% \epigraph{Example is the school of mankind, |
| 286 |
% and they will learn at no other.}% |
| 287 |
% {\textit{Letters on a Regicide Peace}\\ \textsc{Edmund Burke}} |
| 288 |
% \end{verbatim} |
| 289 |
% |
| 290 |
% \subsection{Epigraphs before chapter headings} |
| 291 |
% |
| 292 |
% The |\epigraph| command and the |epigraphs| environment typeset |
| 293 |
% an epigraph at the point in the text where they are placed. The |
| 294 |
% first thing that a |\chapter| command does is to start off a new page, |
| 295 |
% so another mechanism is provided for placing an epigraph just before |
| 296 |
% a chapter heading. |
| 297 |
% |
| 298 |
% \DescribeMacro{\epigraphhead} |
| 299 |
% The |\epigraphhead[|\meta{distance}|]{|\meta{text}|}| stores \meta{text} |
| 300 |
% for printing at \meta{distance} below the header on a page. |
| 301 |
% \meta{text} can be ordinary text or, more likely, can be either an |
| 302 |
% |\epigraph| command or an |epigraphs| environment. By default, the |
| 303 |
% epigraph will be typeset at the right-hand margin. |
| 304 |
% If the command is immediately preceded by a |\chapter| or |\chapter*| |
| 305 |
% command, the epigraph is typeset on the chapter title page. |
| 306 |
% |
| 307 |
% The default value for the optional \meta{distance} argument is set so |
| 308 |
% that an |\epigraph| consisting of a single line of quotation and a single |
| 309 |
% line denoting the source is aligned with the bottom of the `Chapter X' |
| 310 |
% line produced by the |\chapter| command. In other cases you will |
| 311 |
% have to experiment with the \meta{distance} value. The value for |
| 312 |
% \meta{distance} can be either a integer or a real number. The units |
| 313 |
% are in terms of the current value for |\unitlength|. A typical value |
| 314 |
% for \meta{distance} for a single line quotation and source for |
| 315 |
% a |\chapter*| might be about 70 (points). A positive value |
| 316 |
% of \meta{distance} places the epigraph below the page heading and a negative |
| 317 |
% value will raise it above the page heading. |
| 318 |
% |
| 319 |
% Here's some example code: |
| 320 |
% \begin{verbatim} |
| 321 |
% \chapter*{Celestial navigation} |
| 322 |
% \epigraphhead[70]{\epigraph{Star crossed lovers.}{\textit{The Bard}}} |
| 323 |
% \end{verbatim} |
| 324 |
% |
| 325 |
% The |\epigraphhead| command changes the page style for the page on |
| 326 |
% which it is specified, so there should be no text between the |
| 327 |
% |\chapter| and the |\epigraphhead| commands. |
| 328 |
% |
| 329 |
% The \meta{text} argument is put into a minipage of width |\epigraphwidth|. |
| 330 |
% If you use something other than |\epigraph| or |epigraphs| for the |
| 331 |
% \meta{text} argument, you may have to so some positioning of the text |
| 332 |
% yourself so that it is properly located in the minipage. For example |
| 333 |
% \begin{verbatim} |
| 334 |
% \chapter{Short} |
| 335 |
% \renewcommand{\epigraphflush}{center} |
| 336 |
% \epigraphhead{\centerline{Short quote}} |
| 337 |
% \end{verbatim} |
| 338 |
% |
| 339 |
% \changes{v1.3}{1999/12/01}{Added description of dropchapter and undodrop} |
| 340 |
% \DescribeMacro{\dropchapter} |
| 341 |
% \DescribeMacro{\undodrop} |
| 342 |
% If a long epigraph is placed before a chapter title it is possible that the |
| 343 |
% bottom of the epigraph may interfere with the chapter title. The command |
| 344 |
% |\dropchapter{|\meta{length}|}| will lower any subsequent chapter titles by |
| 345 |
% \meta{length}; a negative \meta{length} will raise the titles. |
| 346 |
% The command |\undodrop| restores subsequent chapter titles to their default |
| 347 |
% positions. For example: |
| 348 |
% \begin{verbatim} |
| 349 |
% \dropchapter{2in} |
| 350 |
% \chapter{Title} |
| 351 |
% \epigraphhead{long epigraph} |
| 352 |
% \undodrop |
| 353 |
% \end{verbatim} |
| 354 |
% |
| 355 |
% \changes{v1.2}{1999/09/12}{Added description of cleartoevenpage uses} |
| 356 |
% \DescribeMacro{\cleartoevenpage} |
| 357 |
% On occasions it may be desirable to put something (e.g., an epigraph, a map, |
| 358 |
% a picture) on the page facing the start |
| 359 |
% of a chapter, where the something belongs to the chapter that is about to |
| 360 |
% start rather than the chapter that has just ended. In order to do this |
| 361 |
% in a document that is going to be printed |
| 362 |
% double-sided, the chapter must start on an odd numbered page and the |
| 363 |
% pre-chapter material put on the immediately preceding even numbered page. |
| 364 |
% The |\cleartoevenpage| command is like the |\cleardoublepage| except |
| 365 |
% that the page following the command will be an even numbered page, and the |
| 366 |
% command takes an optional argument, i.e., |\cleartoevenpage{|[arg|]|, |
| 367 |
% which is applied to the skipped page (if any). |
| 368 |
% This command is provided by the \texttt{nextpage} package. |
| 369 |
% |
| 370 |
% Here is an example: |
| 371 |
% \begin{verbatim} |
| 372 |
% ... end previous chapter. |
| 373 |
% \cleartoevenpage |
| 374 |
% \begin{center} |
| 375 |
% \begin{picture}... \end{picture} |
| 376 |
% \end{center} |
| 377 |
% \chapter{Next chapter} |
| 378 |
% \end{verbatim} |
| 379 |
% If the style is such that chapter headings are put at the top of the pages, |
| 380 |
% then it would be advisable to include |\thispagestyle{empty}| (or |plain|) |
| 381 |
% immediately after |\cleartoevenpage| to avoid a heading related to the |
| 382 |
% previous chapter from appearing on the page. |
| 383 |
% |
| 384 |
% If the something is like a figure with a numbered caption and the numbering |
| 385 |
% depends on the chapter numbering, then the numbers have to be hand set (unless |
| 386 |
% you define a special chapter command for the purpose). For example: |
| 387 |
% \begin{verbatim} |
| 388 |
% ... end previous chapter. |
| 389 |
% \cleartoevenpage[\thispagestyle{empty}] % skipped page, if any, to be empty |
| 390 |
% \thispagestyle{plain} |
| 391 |
% \addtocounter{chapter}{1} % increment the chapter number |
| 392 |
% \setcounter{figure}{0} % initialise figure counter |
| 393 |
% \begin{figure} |
| 394 |
% ... |
| 395 |
% \caption{Pre chapter figure} |
| 396 |
% \end{figure} |
| 397 |
% |
| 398 |
% \addtocounter{chapter}{-1} % decrement the chapter number |
| 399 |
% \chapter{Next chapter} % increments chapter number, initialises figure number |
| 400 |
% \addtocounter{figure}{1} % to account for pre-chapter figure |
| 401 |
% \end{verbatim} |
| 402 |
% |
| 403 |
% |
| 404 |
% \subsection{Epigraphs on Part pages} |
| 405 |
% |
| 406 |
% The \Lpack{epigraph} package as it stands cannot put an epigraph on the |
| 407 |
% same page as a |\part| or |\part*| title page in |
| 408 |
% a \Lpack{book} or \Lpack{report} class. This is because the |\part| command |
| 409 |
% internally does some page flipping before and after the title page. |
| 410 |
% However, it is easy enough to put epigraphs on part pages. |
| 411 |
% |
| 412 |
% \begin{itemize} |
| 413 |
% \item Create a file called, say, \file{epipart.sty} which looks like this: |
| 414 |
% \begin{verbatim} |
| 415 |
% % epipart.sty |
| 416 |
% \let\@epipart\@endpart |
| 417 |
% \renewcommand{\@endpart}{\thispagestyle{epigraph}\@epipart} |
| 418 |
% \endinput |
| 419 |
% \end{verbatim} |
| 420 |
% |
| 421 |
% \item Start your document like: |
| 422 |
% \begin{verbatim} |
| 423 |
% \documentclass[...]{...} |
| 424 |
% \usepackage{epigraph} |
| 425 |
% \usepackage{epipart} |
| 426 |
% \end{verbatim} |
| 427 |
% |
| 428 |
% \item Immediately \emph{before} each |\part| command put an |
| 429 |
% |\epigraphhead| command. For example: |
| 430 |
% \begin{verbatim} |
| 431 |
% \epigraphhead[300]{Epigraph text} |
| 432 |
% \part{Part title} |
| 433 |
% \end{verbatim} |
| 434 |
% The value of the optional argument may need changing to vertically adjust |
| 435 |
% the position of the epigraph. If there is any |\part| that does not have an |
| 436 |
% epigraph then an empty |\epigraphhead| command (i.e., |\epigraphhead{}|) |
| 437 |
% must be placed immediately before the |\part| command. |
| 438 |
% |
| 439 |
% \end{itemize} |
| 440 |
% |
| 441 |
% A similar scheme may be used for epigraphs on other kinds of pages. |
| 442 |
% The essential |
| 443 |
% trick is to make sure that the \pstyle{epigraph} pagestyle is used for |
| 444 |
% the page. |
| 445 |
% |
| 446 |
% |
| 447 |
% \subsection{Epigraphed bibliographies} |
| 448 |
% \changes{v1.2}{1999/09/12}{Added application of an epigraph to a bibliography} |
| 449 |
% One author asked how to associate an epigraph with his bibliography. The |
| 450 |
% following is one way to do it (the example is based on the book class). |
| 451 |
% \begin{enumerate} |
| 452 |
% \item Copy the definition of the |thebibliography| environment from |
| 453 |
% \file{book.cls} to your own file called, say \file{epibib.sty}. |
| 454 |
% |
| 455 |
% \item Edit \file{epibib.sty} to include the definition of a vacuous |
| 456 |
% command called, say, |\bibadd|. Edit the definition of the |thebibliography| |
| 457 |
% to include |\bibadd| immediately before the |\list| command. The relevant |
| 458 |
% portions of \file{epibib.sty} will look like this: |
| 459 |
% \begin{verbatim} |
| 460 |
% % epibib.sty |
| 461 |
% ... |
| 462 |
% \newcommand{\bibadd}{} |
| 463 |
% \renewenvironment{thebibliography}[1] |
| 464 |
% {\chapter*{\bibname |
| 465 |
% \@mkboth{\MakeUppercase\bibname}{\MakeUppercase\bibname}}% |
| 466 |
% \bibadd |
| 467 |
% \list{\@biblabel ..... |
| 468 |
% \end{verbatim} |
| 469 |
% |
| 470 |
% \item In your document, start it off like this: |
| 471 |
% \begin{verbatim} |
| 472 |
% \documentclass... |
| 473 |
% \usepackage{epigraph} |
| 474 |
% \usepackage{epibib} |
| 475 |
% \end{verbatim} |
| 476 |
% At the point where the bibliography is to go, do something like the following: |
| 477 |
% \begin{verbatim} |
| 478 |
% ... |
| 479 |
% \newcommand{\bepi}{<definition of epigraph>} |
| 480 |
% \renewcommand{\bibadd}{\bepi} |
| 481 |
% \bepi % seems to be required if using \epigraphhead in \bepi |
| 482 |
% \begin{thebibliography}{...} % or \bibliography{...} |
| 483 |
% ... |
| 484 |
% \end{verbatim} |
| 485 |
% \end{enumerate} |
| 486 |
% The same idea can be applied to document elements like an abstract or an |
| 487 |
% index. Of course |\bibadd| can be defined to be anything you want to typeset |
| 488 |
% between the bibliography heading and the start of the reference list. |
| 489 |
% |
| 490 |
% |
| 491 |
% \section{The package code} \label{sec:code} |
| 492 |
% |
| 493 |
% \tepi{And now for something completely different.}{\textit{Monty Python}} |
| 494 |
% |
| 495 |
% Announce the name and version of the package, which requires |
| 496 |
% \LaTeXe. |
| 497 |
% \begin{macrocode} |
| 498 |
%<*usc> |
| 499 |
\NeedsTeXFormat{LaTeX2e} |
| 500 |
\ProvidesPackage{epigraph}[2020/01/02 v1.5e typesetting epigraphs] |
| 501 |
\RequirePackage{nextpage} |
| 502 |
% \end{macrocode} |
| 503 |
% |
| 504 |
% \begin{macro}{\beforeepigraphskip} |
| 505 |
% \begin{macro}{\afterepigraphskip} |
| 506 |
% \begin{macro}{\epigraphwidth} |
| 507 |
% \begin{macro}{\epigraphrule} |
| 508 |
% The several length commands, which can be changed by the user with |
| 509 |
% |\setlength|. |
| 510 |
% \begin{macrocode} |
| 511 |
\newlength{\beforeepigraphskip} |
| 512 |
\setlength{\beforeepigraphskip}{.5\baselineskip} |
| 513 |
\newlength{\afterepigraphskip} |
| 514 |
\setlength{\afterepigraphskip}{.5\baselineskip} |
| 515 |
\newlength{\epigraphwidth} |
| 516 |
\setlength{\epigraphwidth}{.4\textwidth} |
| 517 |
\newlength{\epigraphrule} |
| 518 |
\setlength{\epigraphrule}{.4\p@} |
| 519 |
% \end{macrocode} |
| 520 |
% \end{macro} |
| 521 |
% \end{macro} |
| 522 |
% \end{macro} |
| 523 |
% \end{macro} |
| 524 |
% |
| 525 |
% \begin{macro}{\epigraphsize} |
| 526 |
% The size of the font to be used. |
| 527 |
% \begin{macrocode} |
| 528 |
\newcommand{\epigraphsize}{\small} |
| 529 |
% \end{macrocode} |
| 530 |
% \end{macro} |
| 531 |
% |
| 532 |
% \begin{macro}{\epigraphnoindent} |
| 533 |
% \begin{macro}{\ifepigraphnoindent} |
| 534 |
% Whether to add \cs{noindent} (false by default for backwards compatibility). |
| 535 |
% \begin{macrocode} |
| 536 |
\newif\ifepigraphnoindent |
| 537 |
\newcommand\epigraphnoindent{\epigraphnoindenttrue} |
| 538 |
% \end{macrocode} |
| 539 |
% \end{macro} |
| 540 |
% \end{macro} |
| 541 |
% |
| 542 |
% \begin{macro}{\epigraphflush} |
| 543 |
% \begin{macro}{\textflush} |
| 544 |
% \begin{macro}{\sourceflush} |
| 545 |
% The three commands to position epigraphs in the textblock and to position |
| 546 |
% the components of the epigraph. |
| 547 |
% \begin{macrocode} |
| 548 |
\newcommand{\epigraphflush}{flushright} |
| 549 |
\newcommand{\textflush}{flushleft} |
| 550 |
\newcommand{\sourceflush}{flushright} |
| 551 |
|
| 552 |
% \end{macrocode} |
| 553 |
% \end{macro} |
| 554 |
% \end{macro} |
| 555 |
% \end{macro} |
| 556 |
% |
| 557 |
% \begin{environment}{flushleftright} |
| 558 |
% An environment for |\textflush| to use normal minipage typesetting. It |
| 559 |
% is vacuous. Defining this was a mistake as the \Lpack{ccaption} |
| 560 |
% package also defines |\flushleftright|. |
| 561 |
% \changes{v1.5a}{2002/10/22}{Made flushleftright environment an error} |
| 562 |
% \begin{macrocode} |
| 563 |
\AtBeginDocument{% |
| 564 |
\@ifundefined{flushleftright}{% |
| 565 |
\newenvironment{flushleftright}{% |
| 566 |
\PackageError{epigraph}% |
| 567 |
{The flushleftright environment has been removed.\MessageBreak |
| 568 |
Use the flushepinormal environment instead}{\@ehc}}{}}% |
| 569 |
{\PackageWarningNoLine{epigraph}% |
| 570 |
{flushleftright has been previously defined.\MessageBreak |
| 571 |
Use flushepinormal for epigraphs instead}}} |
| 572 |
|
| 573 |
% \end{macrocode} |
| 574 |
% \end{environment} |
| 575 |
% |
| 576 |
% \begin{environment}{flushepinormal} |
| 577 |
% An environment for |\textflush| to use normal minipage typesetting. It |
| 578 |
% is vacuous. |
| 579 |
% \changes{v1.5a}{2002/10/22}{Added flushepinormal environment} |
| 580 |
% \begin{macrocode} |
| 581 |
\newenvironment{flushepinormal}{}{} |
| 582 |
|
| 583 |
% \end{macrocode} |
| 584 |
% \end{environment} |
| 585 |
% |
| 586 |
% |
| 587 |
% \begin{macro}{\@epirule} |
| 588 |
% The internal command to draw a rule between text and source. |
| 589 |
% \begin{macrocode} |
| 590 |
\newcommand{\@epirule}{\rule[.5ex]{\epigraphwidth}{\epigraphrule}} |
| 591 |
% \end{macrocode} |
| 592 |
% \end{macro} |
| 593 |
% |
| 594 |
% \begin{macro}{\@epitext} |
| 595 |
% The internal command to typeset the \meta{text}. Put it into a minipage of the |
| 596 |
% right size and typeset per |\textflush|. |
| 597 |
% \begin{macrocode} |
| 598 |
\newcommand{\@epitext}[1]{% |
| 599 |
\begin{minipage}{\epigraphwidth}\begin{\textflush} #1\\ |
| 600 |
% \end{macrocode} |
| 601 |
% Draw a rule if it will be visible, otherwise add some extra vertical space. |
| 602 |
% \begin{macrocode} |
| 603 |
\ifdim\epigraphrule>\z@ \@epirule \else \vspace*{1ex} \fi |
| 604 |
\end{\textflush}\end{minipage}} |
| 605 |
% \end{macrocode} |
| 606 |
% \end{macro} |
| 607 |
% |
| 608 |
% \begin{macro}{\@episource} |
| 609 |
% The internal command for typesetting the \meta{source}, which is put |
| 610 |
% into a minipage and typeset according to |\sourceflush|. |
| 611 |
% \begin{macrocode} |
| 612 |
\newcommand{\@episource}[1]{% |
| 613 |
\begin{minipage}{\epigraphwidth}\begin{\sourceflush} #1\end{\sourceflush} |
| 614 |
\end{minipage}} |
| 615 |
% \end{macrocode} |
| 616 |
% \end{macro} |
| 617 |
% |
| 618 |
% \begin{macro}{\epigraph} |
| 619 |
% Having got the preliminaries out of the way, here's the user command |
| 620 |
% for a single epigraph. This is set in a minipage to prevent breaking |
| 621 |
% across a page. Position it according to |\epigraphflush|. |
| 622 |
% \begin{macrocode} |
| 623 |
\newcommand{\epigraph}[2]{% |
| 624 |
\vspace{\beforeepigraphskip} |
| 625 |
\vbox{% |
| 626 |
\epigraphsize |
| 627 |
\begin{\epigraphflush} |
| 628 |
\begin{minipage}{\epigraphwidth} |
| 629 |
\@epitext{#1}\\ |
| 630 |
\@episource{#2}% |
| 631 |
\end{minipage}% |
| 632 |
\end{\epigraphflush}% |
| 633 |
}% |
| 634 |
\nointerlineskip |
| 635 |
\vspace*{\afterepigraphskip}% |
| 636 |
\ifepigraphnoindent\@afterheading\fi |
| 637 |
} |
| 638 |
% \end{macrocode} |
| 639 |
% \end{macro} |
| 640 |
% |
| 641 |
% |
| 642 |
% \begin{macro}{\qitem} |
| 643 |
% \begin{macro}{\qitemlabel} |
| 644 |
% |\qitem| is the epigraph list version of |\item|. |
| 645 |
% Set everything inside a minipage. |
| 646 |
% \begin{macrocode} |
| 647 |
\newcommand{\qitem}[2]{{\raggedright\item \begin{minipage}{\epigraphwidth} |
| 648 |
\@epitext{#1}\\ \@episource{#2} |
| 649 |
\end{minipage}}} |
| 650 |
% \end{macrocode} |
| 651 |
% |\qitemlabel| is needed for a list as well. It is not going to |
| 652 |
% typeset anything. |
| 653 |
% \begin{macrocode} |
| 654 |
\newcommand{\qitemlabel}[1]{\hfill} |
| 655 |
% \end{macrocode} |
| 656 |
% \end{macro} |
| 657 |
% \end{macro} |
| 658 |
% |
| 659 |
% |
| 660 |
% \begin{environment}{epigraphs} |
| 661 |
% Now for the epigraph list. This is defined in terms of a |list| |
| 662 |
% environment. |
| 663 |
% \begin{macrocode} |
| 664 |
\newenvironment{epigraphs}{% |
| 665 |
% \end{macrocode} |
| 666 |
% Do the vertical space, set the font size, position according to |
| 667 |
% |\epigraphflush|, and put everyting into a minipage. |
| 668 |
% \begin{macrocode} |
| 669 |
\vspace{\beforeepigraphskip}\begin{\epigraphflush} |
| 670 |
\epigraphsize |
| 671 |
\begin{minipage}{\epigraphwidth} |
| 672 |
\list{}% |
| 673 |
% \end{macrocode} |
| 674 |
% Make the list just fit the minipage (i.e., no indents). |
| 675 |
% \begin{macrocode} |
| 676 |
{\itemindent\z@ \labelwidth\z@ \labelsep\z@ |
| 677 |
\leftmargin\z@ \rightmargin\z@ |
| 678 |
\let\makelabel\qitemlabel}}% |
| 679 |
{\endlist\end{minipage}\end{\epigraphflush} |
| 680 |
\vspace{\afterepigraphskip}% |
| 681 |
} |
| 682 |
% \end{macrocode} |
| 683 |
% \end{environment} |
| 684 |
% |
| 685 |
% \subsection{Epigraphs before a chapter title} |
| 686 |
% |
| 687 |
% \begin{macro}{\@epichapapp} |
| 688 |
% \begin{macro}{\dropchapter} |
| 689 |
% \begin{macro}{\undodrop} |
| 690 |
% \changes{v1.3}{1999/12/01}{Defined chapter dropping and support commands} |
| 691 |
% Commands to drop and restore positions of chapter titles. Dropping is |
| 692 |
% accomplished by inserting vertical space before the |\@chapapp| command. |
| 693 |
% \begin{macrocode} |
| 694 |
\newcommand{\dropchapter}[1]{% |
| 695 |
\let\@epichapapp\@chapapp |
| 696 |
\renewcommand{\@chapapp}{\vspace*{#1}\@epichapapp}} |
| 697 |
\newcommand{\undodrop}{\let\@chapapp\@epichapapp} |
| 698 |
% \end{macrocode} |
| 699 |
% \end{macro} |
| 700 |
% \end{macro} |
| 701 |
% \end{macro} |
| 702 |
% |
| 703 |
% Placing an epigraph before a chapter title uses the scheme outlined |
| 704 |
% by Piet van Oostrum~\cite{OOSTRUM96}. This is to put a zero sized |
| 705 |
% picture into the page header. |
| 706 |
% |
| 707 |
% \begin{macro}{\if@epirhs} |
| 708 |
% \begin{macro}{\if@epicenter} |
| 709 |
% Two booleans for testing whether an epigraph is to be at the RH margin, |
| 710 |
% centered, or at the LH margin. The default is RH margin. |
| 711 |
% \begin{macrocode} |
| 712 |
\newif\if@epirhs \@epirhstrue |
| 713 |
\newif\if@epicenter \@epicentertrue |
| 714 |
% \end{macrocode} |
| 715 |
% \end{macro} |
| 716 |
% \end{macro} |
| 717 |
% |
| 718 |
% \begin{macro}{\@epipos} |
| 719 |
% This routine sets the |\if@epi...| booleans according to the value of |
| 720 |
% |\epigraphflush|. If |\epigraphflush| is neither |center| nor |flushleft| |
| 721 |
% then it defaults to |flushright|. We have to use this to be upward |
| 722 |
% compatible with |\epigraphflush| being set by the user with |\renewcommand|. |
| 723 |
% \begin{macrocode} |
| 724 |
\newcommand{\@epipos}{ |
| 725 |
\long\def\@ept{flushleft} |
| 726 |
\ifx\epigraphflush\@ept |
| 727 |
\@epirhsfalse \@epicenterfalse |
| 728 |
\else |
| 729 |
\long\def\@ept{center} |
| 730 |
\ifx\epigraphflush\@ept |
| 731 |
\@epirhsfalse \@epicentertrue |
| 732 |
\else |
| 733 |
\@epirhstrue \@epicenterfalse |
| 734 |
\fi |
| 735 |
\fi} |
| 736 |
% \end{macrocode} |
| 737 |
% \end{macro} |
| 738 |
% |
| 739 |
% |
| 740 |
% \begin{macro}{\epigraphhead} |
| 741 |
% |\epigraphhead[|\meta{distance}|]{|\meta{text}|}| puts \meta{text} at |
| 742 |
% \meta{distance} (a number, not a length) below the header at the |
| 743 |
% page position specified by |\epigraphflush|. |
| 744 |
% \begin{macrocode} |
| 745 |
\newcommand{\epigraphhead}[2][95]{% |
| 746 |
% \end{macrocode} |
| 747 |
% We have to use |\def| instead of the normal \LaTeX{} definition commands |
| 748 |
% as we will keep on |
| 749 |
% (re)defining things. For reasons that are not fully clear to me \LaTeX{} |
| 750 |
% doesn't seem to like me using a |\savebox| for storing the epigraph text, |
| 751 |
% so I'll use a command instead. |
| 752 |
% \begin{macrocode} |
| 753 |
\def\@epitemp{\begin{minipage}{\epigraphwidth}#2\end{minipage}} |
| 754 |
% \end{macrocode} |
| 755 |
% Define an |epigraph| page style. |
| 756 |
% \begin{macrocode} |
| 757 |
\def\ps@epigraph{\let\@mkboth\@gobbletwo |
| 758 |
% \end{macrocode} |
| 759 |
% There are three possible definitions for |\@oddhead| depending on the |
| 760 |
% value of |\epigraphflush|. We call |\@epipos| to decide which one to do. |
| 761 |
% \begin{macrocode} |
| 762 |
\@epipos |
| 763 |
\if@epirhs |
| 764 |
\def\@oddhead{\hfil\begin{picture}(0,0) |
| 765 |
\put(0,-#1){\makebox(0,0)[r]{\@epitemp}} |
| 766 |
\end{picture}} |
| 767 |
\else |
| 768 |
\if@epicenter |
| 769 |
\def\@oddhead{\hfil\begin{picture}(0,0) |
| 770 |
\put(0,-#1){\makebox(0,0)[b]{\@epitemp}} |
| 771 |
\end{picture}\hfil} |
| 772 |
\else |
| 773 |
\def\@oddhead{\begin{picture}(0,0) |
| 774 |
\put(0,-#1){\makebox(0,0)[l]{\@epitemp}} |
| 775 |
\end{picture}\hfil} |
| 776 |
\fi |
| 777 |
\fi |
| 778 |
\let\@evenhead\@oddhead |
| 779 |
\def\@oddfoot{\reset@font\hfil\thepage\hfil} |
| 780 |
\let\@evenfoot\@oddfoot} |
| 781 |
% \end{macrocode} |
| 782 |
% Make |epigraph| be the page style for this page. |
| 783 |
% \begin{macrocode} |
| 784 |
\thispagestyle{epigraph}} |
| 785 |
% \end{macrocode} |
| 786 |
% \end{macro} |
| 787 |
% |
| 788 |
% |
| 789 |
% The end of this package. |
| 790 |
% \begin{macrocode} |
| 791 |
%</usc> |
| 792 |
% \end{macrocode} |
| 793 |
% |
| 794 |
% |
| 795 |
% \bibliographystyle{alpha} |
| 796 |
% |
| 797 |
% \begin{thebibliography}{GMS94} |
| 798 |
% |
| 799 |
% \bibitem[GMS94]{GOOSSENS94} |
| 800 |
% Michel Goossens, Frank Mittelbach, and Alexander Samarin. |
| 801 |
% \newblock {\em The LaTeX Companion}. |
| 802 |
% \newblock Addison-Wesley Publishing Company, 1994. |
| 803 |
% |
| 804 |
% \bibitem[vO96]{OOSTRUM96} |
| 805 |
% Piet van Oostrum |
| 806 |
% \newblock {\em Page layout in \LaTeX}, June 1996. |
| 807 |
% \newblock (Available from CTAN as file \texttt{fancyhdr.tex}). |
| 808 |
% |
| 809 |
% \bibitem[SW94]{EBOOK} |
| 810 |
% Douglas Schenck and Peter Wilson. |
| 811 |
% \newblock {\em Information Modeling the EXPRESS Way}. |
| 812 |
% \newblock Oxford University Press, 1994 (ISBN 0-19-508714-3). |
| 813 |
% |
| 814 |
% \bibitem[Thi99]{TTC199} |
| 815 |
% Christina Thiele. |
| 816 |
% \newblock \emph{The Treasure Chest: Package tours from CTAN}, |
| 817 |
% \newblock TUGboat, vol.~20, no.~1, pp~53--58, March 1999. |
| 818 |
% |
| 819 |
% \end{thebibliography} |
| 820 |
% |
| 821 |
% |
| 822 |
% \Finale |
| 823 |
% \PrintIndex |
| 824 |
% |
| 825 |
\endinput |
| 826 |
|
| 827 |
%% \CharacterTable |
| 828 |
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 829 |
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 830 |
%% Digits \0\1\2\3\4\5\6\7\8\9 |
| 831 |
%% Exclamation \! Double quote \" Hash (number) \# |
| 832 |
%% Dollar \$ Percent \% Ampersand \& |
| 833 |
%% Acute accent \' Left paren \( Right paren \) |
| 834 |
%% Asterisk \* Plus \+ Comma \, |
| 835 |
%% Minus \- Point \. Solidus \/ |
| 836 |
%% Colon \: Semicolon \; Less than \< |
| 837 |
%% Equals \= Greater than \> Question mark \? |
| 838 |
%% Commercial at \@ Left bracket \[ Backslash \\ |
| 839 |
%% Right bracket \] Circumflex \^ Underscore \_ |
| 840 |
%% Grave accent \` Left brace \{ Vertical bar \| |
| 841 |
%% Right brace \} Tilde \~} |
| 842 |
|
| 843 |
|