Debian Codegraph @

texmf-dist/source/latex/apa6e/apa6e.dtx

raw
1 % \iffalse meta-comment
2 %
3 % Copyright (C) 2011 by Nathaniel J. Smith <[email protected]>
4 % --------------------------------------------------------
5 %
6 % Redistribution and use in source and binary forms, with or without
7 % modification, are permitted provided that the following conditions are
8 % met:
9 %
10 % 1. Redistributions of source code must retain the above copyright
11 % notice, this list of conditions and the following disclaimer.
12 %
13 % 2. Redistributions in binary form must reproduce the above
14 % copyright notice, this list of conditions and the following
15 % disclaimer in the documentation and/or other materials provided
16 % with the distribution.
17 %
18 % THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 % ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20 % LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
21 % A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
22 % HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
23 % SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
24 % LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25 % DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26 % THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27 % (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
28 % OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 %
30 % \fi
31 %
32 % \iffalse
33 %<*driver>
34 \ProvidesFile{apa6e.dtx}
35 %</driver>
36 %<class>\NeedsTeXFormat{LaTeX2e}
37 %<class>\ProvidesClass{apa6e}
38 %<*class>
39 [2011/03/03 v0.3 APA 6e manuscript formatting]
40 %</class>
41 %
42 %<*driver>
43 \documentclass{ltxdoc}
44 \usepackage{url}
45 \EnableCrossrefs
46 \CodelineIndex
47 \RecordChanges
48 \begin{document}
49 \DocInput{apa6e.dtx}
50 \end{document}
51 %</driver>
52 % \fi
53 %
54 % \CharacterTable
55 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
56 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
57 % Digits \0\1\2\3\4\5\6\7\8\9
58 % Exclamation \! Double quote \" Hash (number) \#
59 % Dollar \$ Percent \% Ampersand \&
60 % Acute accent \' Left paren \( Right paren \)
61 % Asterisk \* Plus \+ Comma \,
62 % Minus \- Point \. Solidus \/
63 % Colon \: Semicolon \; Less than \<
64 % Equals \= Greater than \> Question mark \?
65 % Commercial at \@ Left bracket \[ Backslash \\
66 % Right bracket \] Circumflex \^ Underscore \_
67 % Grave accent \` Left brace \{ Vertical bar \|
68 % Right brace \} Tilde \~}
69 %
70 %
71 % \changes{v0.1}{2011/02/12}{Initial version}
72 %
73 % \changes{v0.2}{2011/03/01}{Added support for appendices}
74 %
75 % \changes{v0.3}{2011/07/02}{Added \texttt{floatmarkers}
76 % option. Increased |\headheight| to make \textsc{fancyhdr}
77 % happy. Made it possible to refer to appendices by
78 % label. Implemented the rule that if there is only a single
79 % appendix, it is simply called ``Appendix'', not ``Appendix
80 % A''. Fixed a bug where floats were sometimes labeled as being in
81 % an appendix (like ``Figure A1'') even when they weren't (thanks to
82 % J.~Olson and Alex Sommerfeldt for the report and fix).}
83 %
84 % \GetFileInfo{apa6e.dtx}
85 %
86 % \DoNotIndex{\newcommand,\renewcommand}
87 %
88 %
89 % \title{The \textsf{apa6e} class\thanks{This document
90 % corresponds to \textsf{apa6e}~\fileversion, dated \filedate.}}
91 % \author{Nathaniel J.~Smith \\ \texttt{[email protected]}}
92 %
93 % \maketitle
94 %
95 % \section{Introduction}
96 %
97 % This is a minimalist class file for formatting manuscripts in the
98 % style described the American Psychological Association (APA) 6th
99 % edition guidelines. Perhaps someday the more capable
100 % \textsf{apa.cls} will gain support for 6th edition APA formatting,
101 % in which case you should probably use it instead. But in the mean
102 % time, this class may be useful.
103 %
104 % Note that this class relies heavily on existing \LaTeX\ packages to
105 % do its work. If you're using a reasonably complete \LaTeX\
106 % distribution like \TeX\ Live then you probably have them already,
107 % but if not then they can all be retrieved from CTAN.
108 %
109 % \section{Usage}
110 %
111 % Here's a sample document to get you started:
112 % \begin{verbatim}
113 % \documentclass{apa6e}
114 % \usepackage{apacite} % This is not done automatically!
115 % \bibliographystyle{apacite}
116 % \title{A simple, correct explanation for every aspect of mental function}
117 % \shorttitle{Psychology: the end}
118 % \author{Over J.~Optimistic\\Pie in the Sky University}
119 % \authornote{\dots}
120 % \abstract{\dots}
121 % \begin{document}
122 % \maketitle
123 % I have discovered a truly remarkable theory which
124 % this example is too small to contain.
125 % \bibliography{my-refs}
126 % \end{document}
127 % \end{verbatim}
128 % Pretty simple, really. But for a few more details, read on.
129 %
130 % \section{Appendices}
131 %
132 % In APA style, appendices are not named. So to get appendices, use
133 % the same mechanism as normal \LaTeX (i.e., type |\appendix| to
134 % switch to `appendix mode' and then use |\section| to start each
135 % appendix), but note that the section title will be ignored. You can
136 % type |\section{Stimuli}| or |\section{La La La}| or just
137 % |\section{}| and you'll get the same result regardless (something
138 % like ``Appendix B'').
139 %
140 % \subsection{References}
141 %
142 % This class does not provide any built-in support for formatting
143 % references in APA style; I suggest using either the classic
144 % \textsf{apacite} package, or the \textsf{biblatex-apa} package
145 % (which more accurately implements current APA guidelines, but
146 % depends on use of the new \textsf{biblatex} system).
147 %
148 % If you do use \textsf{apacite}, then this package will automatically
149 % make sure that it uses the appropriate style of header. If you use
150 % \textsf{biblatex-apa}, then you're on your own --- if you try this,
151 % please let me know whether you had to adjust anything!
152 %
153 % \subsection{Class options}
154 %
155 % This class supports several options.
156 %
157 % \subsubsection{\texttt{leavefloats}}
158 % When reading drafts, I find the APA manuscript format quite
159 % usable, except that I find it very annoying to have to flip back and
160 % forth between the text and tables/figures/their captions. Use this
161 % option if you want to let \LaTeX do use normal handling of floats,
162 % e.g.: |\documentclass[leavefloats]{apa6e}|.
163 %
164 % To make sure you don't forget to take it out before submitting,
165 % this also inserts a large note on the front page to remind you that
166 % you are looking at a draft with illegitimate formatting.
167 %
168 % \subsubsection{\texttt{floatmarkers}}
169 % Some people like to leave little markers in the text that say
170 % ``Figure 3 about here'' and so on. As far as I can tell, this
171 % is actually not part of APA 6e style, but if you want to do it
172 % anyway, then this option is here for you:
173 % |\documentclass{floatmarkers}{apa6e}|.
174 %
175 % \subsubsection{\texttt{endnotes}}
176 % APA style allows footnotes to either be formatted as footnotes
177 % directly in the text, or placed at the end in a `Footnotes'
178 % section. By default we do the former; if you really want the latter
179 % for some reason, then enable this option:
180 % |\documentclass[endnotes]{apa6e}|.
181 %
182 % Of course, if you want multiple, then you can accomplish that in the
183 % usual way: |\documentclass[leavefloats,endnotes]{apa6e}|.
184 %
185 % \subsection{Known limitations}
186 %
187 % We currently make no attempt to alter the standard list
188 % environments (|itemize|, |enumerate|). As far as I can tell they are
189 % already APA compliant, but they might introduce enough extra
190 % vertical spacing as to be visually unpleasant. If this bothers you
191 % and you find a good solution, let me know. (Also, we don't even
192 % attempt to reproduce \textsf{apa.cls}'s |seriate| environment. I'm
193 % not sure why one would use it in the first place.)
194 %
195 % We only format manuscripts; in particular, there is no equivalent to
196 % \textsf{apa.cls}'s |jou| or |doc| modes. I don't really see the
197 % point, personally, so I'm unlikely to fix this, but if you find
198 % one of these modes useful and want to write some code for it, then
199 % contributions are welcome.
200 %
201 % \subsection{Known \textit{Non}-limitations}
202 %
203 % In \textsf{apa.cls}, you cannot have any blank lines around
204 % |\maketitle|, or formatting gets screwed up. When using
205 % \textsf{apa6e.cls}, you can use as many blank lines as you like. Go
206 % crazy.
207 %
208 % In \textsf{apa.cls}, you must be careful about where you place your
209 % captions inside a floating environment --- they must go at the top
210 % of |table| environments, and at the bottom of |figure|
211 % environments. In \textsf{apa6e.cls}, you can put your captions
212 % where-ever you want, and they'll still come out in the right
213 % place. One less thing to worry about.
214 %
215 % \subsection{New macros}
216 %
217 % \DescribeMacro{\mspart}
218 % This class defines just one new macro, and you shouldn't need to use
219 % it. But just in case\dots\ |\mspart| is a new sectioning command,
220 % designed to format the header at the beginning of each APA
221 % manuscript `part' --- e.g., the abstract, the main body, the
222 % references, etc. The syntax is exactly the same as for |\section|
223 % and friends, e.g.: |\mspart{Abstract}|. However, since all the
224 % standard manuscript parts are generated automatically by other
225 % macros, this is unlikely to be useful.
226 %
227 % \StopEventually{\PrintChanges\PrintIndex}
228 %
229 % \section{Implementation}
230 %
231 % Define our options, and then load up the standard \textsf{article} class.
232 % \begin{macrocode}
233 \DeclareOption{endnotes}{\def\apaSIXe@endnotes\relax}
234 \DeclareOption{leavefloats}{\def\apaSIXe@leavefloats\relax}
235 \DeclareOption{floatmarkers}{\def\apaSIXe@floatmarkers\relax}
236 % \end{macrocode}
237 % All unrecognized options are passed through to \textsf{article}.
238 % \begin{macrocode}
239 \DeclareOption*{%
240 \PassOptionsToClass{\CurrentOption}{article}%
241 }
242 \ProcessOptions\relax
243 \LoadClass[12pt]{article}
244 % \end{macrocode}
245 % We want to typeset everything in Times, including math.
246 % \begin{macrocode}
247 \RequirePackage{times}
248 \RequirePackage{mathptmx}
249 % \end{macrocode}
250 % Set margins and justification. If |\headheight| is less than 15 pt,
251 % \textsc{fancyhdr} will complain.
252 % \begin{macrocode}
253 \RequirePackage[margin=1in,headheight=15pt]{geometry}
254 \RequirePackage[document]{ragged2e}
255 % \end{macrocode}
256 % APA 6e says that indents should be ``5--7 spaces, or 1/2
257 % inch''. We'll use the latter.
258 % \begin{macrocode}
259 \setlength{\RaggedRightParindent}{0.5in}
260 % \end{macrocode}
261 % Doublespacing: The \textsf{setspace} package has the good taste to
262 % disable doublespacing for things like captions and footnotes; the
263 % APA doesn't. Which is totally reasonable, but it means that we can't
264 % use \textsf{setspace}. I stole this magic number from the
265 % \textsf{setspace} code --- it is only correct for 12 pt font. But
266 % we only support 12 pt font anyway.
267 % \begin{macrocode}
268 \newcommand{\@doublespacing}{\linespread{1.655}}
269 \@doublespacing
270 % \end{macrocode}
271 % Set up the running header.
272 % \begin{macrocode}
273 \RequirePackage{fancyhdr}
274 \setlength{\headheight}{15.2pt}
275 \fancyhf{}
276 \renewcommand{\headrulewidth}{0pt}
277 \rhead{\thepage}
278 \fancypagestyle{titlepage}{\lhead{Running head: \MakeUppercase{\@shorttitle}}}
279 \fancypagestyle{otherpage}{\lhead{\MakeUppercase{\@shorttitle}}}
280 \pagestyle{otherpage}
281 % \end{macrocode}
282 % \subsection{The title page}
283 % The commands to capture the various bits of the title page and
284 % abstract.
285 % \begin{macrocode}
286 \newcommand{\shorttitle}[1]{\def\@shorttitle{#1}}
287 \renewcommand{\title}[1]{\def\@title{#1}}
288 \renewcommand{\author}[1]{\def\@author{#1}}
289 \newcommand{\authornote}[1]{\def\@authornote{#1}}
290 \renewcommand{\abstract}[1]{\def\@abstract{#1}}
291 % \end{macrocode}
292 % And here's how we actually format the title page.
293 % \begin{macrocode}
294 \renewcommand{\maketitle}{%
295 \thispagestyle{titlepage}%
296 \vspace*{1in}%
297 \Centering\@title\\\@author%
298 \vfill%
299 \ifdefined%
300 \apaSIXe@leavefloats%
301 {\large\textbf{\textit{A helpful reminder, courtesy \texttt{apa6e.cls}:} Figures and tables are currently mixed in with
302 your text for easier reading. Don't forget to remove the
303 \texttt{leavefloats} option before you submit!}\vfill}%
304 \fi
305 Author Note\par\RaggedRight\@authornote%
306 \mspart{Abstract}%
307 \@abstract%
308 \mspart{\@title}}
309 % \end{macrocode}
310 % By default, the \textsf{apacite} package will format the beginning
311 % of the references as if a section, by calling
312 % |\section{References}|. But that would be wrong. So we override the
313 % internal command that it uses to do this.
314 % \begin{macrocode}
315 \AtBeginDocument{\def\st@rtbibsection{\mspart{References}}}
316 % \end{macrocode}
317 % \subsection{Captions}
318 % Caption formatting is complicated. For tables, captions go above the
319 % float body, and are formatted like:
320 % \begin{center}
321 % \framebox{\begin{tabular}{ll}Table 3 \\ \textit{My fabulous table}\end{tabular}}
322 % \end{center}
323 % For figures, captions go below the float body, and are formatted like:
324 % \begin{center}
325 % \framebox{\textit{Figure 7:} My smashing graph.}
326 % \end{center}
327 % \begin{macrocode}
328 \RequirePackage{float}
329 \floatstyle{plaintop}
330 \restylefloat{table}
331 \floatstyle{plain} % This puts captions below the figure
332 \restylefloat{figure}
333 \RequirePackage[singlelinecheck=off,justification=RaggedRight]{caption}
334 \DeclareCaptionLabelFormat{tablelabel}{\hspace{-\RaggedRightParindent}#1 #2}
335 \DeclareCaptionLabelFormat{figurelabel}{\hspace{-\RaggedRightParindent}\textit{#1 #2}}
336 \DeclareCaptionTextFormat{tabletext}{\hspace{-\RaggedRightParindent}\textit{#1}}
337 \captionsetup[table]{position=above,labelformat=tablelabel,labelsep=newline,
338 textformat=tabletext}
339 \captionsetup[figure]{position=below,labelformat=figurelabel}
340 % \end{macrocode}
341 % \subsection{Sectioning}
342 % First, disable section numbering.
343 % \begin{macrocode}
344 \setcounter{secnumdepth}{0}
345 % \end{macrocode}
346 % Now, redefine the various sectioning commands to look like APA
347 % titles --- |\section| is APA level 1, |\subsection| is APA level 2,
348 % etc. This requires we use the |\@startsection| macro, which is very
349 % confusing. Apparently it is documented in something called
350 % \texttt{rep10.doc}; I found the relevant snippet at
351 % \url{http://help-csli.stanford.edu/tex/latex-sections.shtml} and
352 % reproduce it here for reference:
353 %
354 % \begin{verbatim}
355 % \@startsection {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}
356 % optional * [ALTHEADING]{HEADING}
357 % Generic command to start a section.
358 % NAME : e.g., 'subsection'
359 % LEVEL : a number, denoting depth of section -- e.g., chapter=1,
360 % section = 2, etc. A section number will be printed if
361 % and only if LEVEL < or = the value of the secnumdepth
362 % counter.
363 % INDENT : Indentation of heading from left margin
364 % BEFORESKIP : Absolute value = skip to leave above the heading.
365 % If negative, then paragraph indent of text following
366 % heading is suppressed.
367 % AFTERSKIP : if positive, then skip to leave below heading,
368 % else - skip to leave to right of run-in heading.
369 % STYLE : commands to set style
370 % If '*' missing, then increments the counter. If it is present, then
371 % there should be no [ALTHEADING] argument. A sectioning command
372 % is normally defined to \@startsection + its first six arguments.
373 % \end{verbatim}
374 %
375 % \begin{macro}{\section}
376 % \begin{macro}{\subsection}
377 % Now, the code. For level 1 and 2 titles, we give them just a
378 % \textit{little} bit of extra vertical room --- I find it makes them
379 % much easier to read.
380 % \begin{macrocode}
381 \renewcommand{\section}{\@startsection {section}{1}{\z@}%
382 {0.2\baselineskip \@plus 0.2ex \@minus 0.2ex}%
383 {0.2\baselineskip \@plus .2ex}%
384 {\Centering\normalfont\normalsize\bfseries}}
385 \renewcommand{\subsection}{\@startsection{subsection}{2}{\z@}%
386 {0.2\baselineskip \@plus 0.2ex \@minus 0.2ex}%
387 {0.2\baselineskip \@plus 0.2ex}%
388 {\normalfont\normalsize\bfseries}}
389 % \end{macrocode}
390 % \end{macro}
391 % \end{macro}
392 % \begin{macro}{\subsubsection}
393 % \begin{macro}{\paragraph}
394 % \begin{macro}{\subparagraph}
395 % For levels 3--5, we don't add any extra vertical spacing, but we do
396 % add just a little bit of extra horizontal space between the section
397 % name and the text. And of course, we need to handle the obligatory
398 % period.
399 % \begin{macrocode}
400 \renewcommand{\subsubsection}[1]{\@startsection{subsubsection}{3}{\parindent}%
401 {0\baselineskip \@plus 0.2ex \@minus 0.2ex}%
402 {-\z@}%
403 {\normalfont\normalsize\bfseries}{#1}\textbf{.}\hspace{0.2em}}
404 \renewcommand{\paragraph}[1]{\@startsection{paragraph}{4}{\parindent}%
405 {0\baselineskip \@plus 0.2ex \@minus 0.2ex}%
406 {-\z@}%
407 {\normalfont\normalsize\bfseries\itshape}{#1}\textbf{\textit{.}}\hspace{0.2em}}
408 \renewcommand{\subparagraph}[1]{\@startsection{subparagraph}{5}{\parindent}%
409 {0\baselineskip \@plus 0.2ex \@minus 0.2ex}%
410 {-\z@}%
411 {\normalfont\normalsize\itshape}{#1}\textit{.}\hspace{0.2em}}
412 % \end{macrocode}
413 % \end{macro}
414 % \end{macro}
415 % \end{macro}
416 % \begin{macro}{\mspart}
417 % And we define a new sectioning command, for beginning 'manuscript
418 % parts' (e.g., abstract, main body, references). Unlike section
419 % headings, these should \textit{not} be bolded, but we do disable
420 % following indentation. (Note that we cheat and re-use the section
421 % counter, which doesn't matter since sections are unnumbered anyway.)
422 % \begin{macrocode}
423 \newcommand{\mspart}{\newpage\@startsection {section}{1}{\z@}%
424 {-0.2\baselineskip \@plus -0.2ex \@minus -0.2ex}%
425 {0.2\baselineskip \@plus .2ex}%
426 {\Centering\normalfont\normalsize}}
427 % \end{macrocode}
428 % \end{macro}
429 % \begin{macro}{\appendix}
430 % Appendix handling is pretty straightforward, except that we have to
431 % rearrange how floats are numbered (they go A1, A2, ... within
432 % appendix A), and this is complicated by the need to work properly
433 % with \textsc{endfloat}. So if the \textsc{leavefloats} option is in
434 % effect, we'll want to change numbering immediately, but if we're
435 % putting floats at the end, then we need to arrange for the numbering
436 % changes to happen when \textsc{endfloat} is part of the way through
437 % processing the floats. This is done by defining
438 % |\apaSIXe@appendixfloats@setup| appropriately in the two cases,
439 % below.
440 %
441 % The other slightly messy bit is that if there is only one appendix,
442 % it is called ``Appendix'', but if there is more than one, then the
443 % first is called ``Appendix A''. So we need to keep track of how many
444 % appendices the document contains. We do this using a nasty |\label|
445 % hack to get the necessary information into the \texttt{.aux} file.
446 % \begin{macrocode}
447 \RequirePackage{ifthen}
448 \renewcommand{\appendix}{\setcounter{section}{0}
449 \renewcommand{\section}[1]{\addtocounter{section}{1}
450 \ifthenelse{\equal{\value{section}}{2}}
451 {\label{apaSIXe@has@multiple@appendices}}
452 {}
453 \apaSIXe@appendixfloats@setup{\Alph{section}}
454 \def\@currentlabel{\Alph{section}}
455 \ifdefined\r@apaSIXe@has@multiple@appendices
456 \mspart{Appendix \Alph{section}}
457 \else
458 \mspart{Appendix}
459 \fi}}
460 \newcommand{\apaSIXe@appendixfloats@figureson}[1]{%
461 \setcounter{figure}{0}%
462 \renewcommand{\thefigure}{#1\arabic{figure}}}
463 \newcommand{\apaSIXe@appendixfloats@tableson}[1]{%
464 \setcounter{table}{0}%
465 \renewcommand{\thetable}{#1\arabic{table}}}
466 % \end{macrocode}
467 % \end{macro}
468 % \subsection{Endnotes}
469 % If the user requested endnotes, then set them up here. I'm not sure
470 % why you'd want this, but I wrote the code before realizing that
471 % ordinary footnotes were legal, so you get the benefit of my
472 % mistake.
473 % \begin{macrocode}
474 \ifdefined\apaSIXe@endnotes
475 \RequirePackage{endnotes}
476 \renewcommand{\enoteheading}{\mspart{Footnotes}}
477 \def\enotesize{\normalsize}
478 \renewcommand{\footnote}[1]{\def\apaSIXe@hasendnotes\relax{}\endnote{#1}}
479 \AtEndDocument{\ifdefined \apaSIXe@hasendnotes \theendnotes \fi}
480 \fi
481 % \end{macrocode}
482 % \subsection{Floats at the end}
483 % This must come after the endnotes handling above, since they both
484 % use |\AtEndDocument| and floats are supposed to come after
485 % footnotes.
486 %
487 % If \textsc{endfloat} is in use, then we have to arrange for
488 % |\apaSIXe@appendixfloats@figureson| and
489 % |\apaSIXe@appendixfloats@tableson| to be called partly through the
490 % floats being processed. We accomplish this by writing out a calls to
491 % them in the \texttt{fff} and \texttt{ttt} files that
492 % \textsc{endfloat} uses. (Note that it's important to have two
493 % different commands --- we used to have just one, but then whichever
494 % file was loaded first turned on the appendix mode half-way through,
495 % and then appendix mode was in effect for \textit{all} of the other
496 % file.) If \texttt{floatmarkers} option is in effect, then we also
497 % need to make sure that the markers for floats in the appendix use
498 % the right numbers --- and these use different counters.
499 % \begin{macrocode}
500 \ifdefined\apaSIXe@leavefloats
501 \newcommand{\apaSIXe@appendixfloats@setup}[1]{%
502 \apaSIXe@appendixfloats@tableson{#1}%
503 \apaSIXe@appendixfloats@figureson{#1}%
504 }
505 \else
506 \ifdefined\apaSIXe@floatmarkers
507 \relax
508 \else
509 \PassOptionsToPackage{nomarkers}{endfloat}
510 \fi
511 \RequirePackage[nolists,noheads,tablesfirst]{endfloat}
512 \AtBeginDelayedFloats{\@doublespacing}
513 \newcommand{\apaSIXe@appendixfloats@setup}[1]{%
514 \setcounter{postfig}{0}%
515 \renewcommand{\thepostfig}{#1\arabic{postfig}}%
516 \setcounter{posttbl}{0}%
517 \renewcommand{\theposttbl}{#1\arabic{posttbl}}%
518 \efloat@iwrite{fff}{%
519 \string\makeatletter\string\apaSIXe@appendixfloats@figureson{#1}\string\makeatother}%
520 \efloat@iwrite{ttt}{%
521 \string\makeatletter\string\apaSIXe@appendixfloats@tableson{#1}\string\makeatother}}
522 \fi
523 % \end{macrocode}
524 %
525 % \Finale
526 \endinput