| 1 |
% \iffalse |
| 2 |
% |
| 3 |
%% Copyright 2022, Boris Veytsman <[email protected]> |
| 4 |
%% This work may be distributed and/or modified under the |
| 5 |
%% conditions of the LaTeX Project Public License, either |
| 6 |
%% version 1.3 of this license or (at your option) any |
| 7 |
%% later version. |
| 8 |
%% The latest version of the license is in |
| 9 |
%% http://www.latex-project.org/lppl.txt |
| 10 |
%% and version 1.3 or later is part of all distributions of |
| 11 |
%% LaTeX version 2003/06/01 or later. |
| 12 |
%% |
| 13 |
%% This work has the LPPL maintenance status `maintained'. |
| 14 |
%% |
| 15 |
%% The Current Maintainer of this work is Boris Veytsman |
| 16 |
%% |
| 17 |
%% This work consists of the file adjmulticol.dtx and the |
| 18 |
%% derived file adjmulticol.sty, |
| 19 |
%% |
| 20 |
%% |
| 21 |
%% Since this package is based on the multicol package, |
| 22 |
%% Copyright 1989-2005 Frank Mittelbach, the following additional |
| 23 |
%% condition is added to the licensing terms. The term ``multicol'' |
| 24 |
%% here should be interpreted as ``multicol and/or adjmulticol'' |
| 25 |
%% package, as appropriate. |
| 26 |
%% |
| 27 |
%% In addition to the terms of LPPL any distributed version |
| 28 |
%% (unchanged or modified) of multicol has to keep the statement |
| 29 |
%% about the moral obligation for using multicol. In case of major |
| 30 |
%% changes where this would not be appropriate the author of the |
| 31 |
%% changed version should contact the copyright holder. |
| 32 |
%% |
| 33 |
%% |
| 34 |
%% Moral obligation for using multicol: |
| 35 |
%% ------------------------------------ |
| 36 |
%% |
| 37 |
%% Users of multicol who wish to include or use multicol or a modified |
| 38 |
%% version in a proprietary and commercially market product are asked |
| 39 |
%% under certain conditions (see below) for the payment of a license |
| 40 |
%% fee. The size of this fee is to be determined, in each instance, |
| 41 |
%% by the commercial user, depending on his/her judgment of the value of |
| 42 |
%% multicol for his/her product. |
| 43 |
%% |
| 44 |
%% |
| 45 |
%% The conditions for this are as follows: |
| 46 |
%% |
| 47 |
%% The producer of a proprietary and commercially market product |
| 48 |
%% that involves typesetting using multicol is asked to determine |
| 49 |
%% the value of a license fee for using multicol if |
| 50 |
%% |
| 51 |
%% - the product is a document and the producer has decided to |
| 52 |
%% include multicol to typeset (parts of) the document or has |
| 53 |
%% directed the author of the document to include multicol (for |
| 54 |
%% example, by providing a class file to be used by the author) |
| 55 |
%% |
| 56 |
%% - the product is a LaTeX class or package that includes multicol |
| 57 |
%% |
| 58 |
%% |
| 59 |
%% There is no moral obligation in case |
| 60 |
%% |
| 61 |
%% - the product is a document but producer has not directed |
| 62 |
%% the author to include multicol (in that case the moral obligation |
| 63 |
%% lies with the author of the document) |
| 64 |
%% |
| 65 |
%% - the product does not involve typesetting, e.g., consists, for |
| 66 |
%% example, of distributing multicol and its documentation. |
| 67 |
%% |
| 68 |
%% - the product is not proprietary, i.e., is made available as free |
| 69 |
%% software itself (which doesn't prohibit its commercial marketing) |
| 70 |
%% |
| 71 |
%% - multicol is used for non-commercial purposes |
| 72 |
%% |
| 73 |
%% |
| 74 |
%% Determinating a license fee might result in a license fee of zero |
| 75 |
%% (i.e., no payment) in case a producer has determined that the use |
| 76 |
%% of multicol has no enhancing effect on the product. This is a |
| 77 |
%% plausible scenario, i.e., in the above two cases the producer is |
| 78 |
%% only asked to evaluate the value of multicol for the product |
| 79 |
%% not for the payment of a license fee per se (which might or might |
| 80 |
%% not follow from this evaluation). |
| 81 |
%% |
| 82 |
%% The license fee, if any, can be payed either to the LaTeX3 fund |
| 83 |
%% (see ltx3info.txt in the base LaTeX distribution) or to the author of |
| 84 |
%% the program who can be contacted at |
| 85 |
%% |
| 86 |
%% [email protected] |
| 87 |
%% |
| 88 |
%<*gobble> |
| 89 |
% \fi |
| 90 |
% \CheckSum{0} |
| 91 |
% |
| 92 |
% |
| 93 |
%% \CharacterTable |
| 94 |
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 95 |
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 96 |
%% Digits \0\1\2\3\4\5\6\7\8\9 |
| 97 |
%% Exclamation \! Double quote \" Hash (number) \# |
| 98 |
%% Dollar \$ Percent \% Ampersand \& |
| 99 |
%% Acute accent \' Left paren \( Right paren \) |
| 100 |
%% Asterisk \* Plus \+ Comma \, |
| 101 |
%% Minus \- Point \. Solidus \/ |
| 102 |
%% Colon \: Semicolon \; Less than \< |
| 103 |
%% Equals \= Greater than \> Question mark \? |
| 104 |
%% Commercial at \@ Left bracket \[ Backslash \\ |
| 105 |
%% Right bracket \] Circumflex \^ Underscore \_ |
| 106 |
%% Grave accent \` Left brace \{ Vertical bar \| |
| 107 |
%% Right brace \} Tilde \~} |
| 108 |
% |
| 109 |
%\iffalse |
| 110 |
% \begin{macrocode} |
| 111 |
\documentclass{ltxdoc} |
| 112 |
\usepackage[breaklinks,colorlinks,linkcolor=black,citecolor=black, |
| 113 |
pagecolor=black,urlcolor=black]{hyperref} |
| 114 |
\usepackage{breakurl,adjmulticol} |
| 115 |
\PageIndex |
| 116 |
\CodelineIndex |
| 117 |
\RecordChanges |
| 118 |
\EnableCrossrefs |
| 119 |
\begin{document} |
| 120 |
\DocInput{adjmulticol.dtx} |
| 121 |
\end{document} |
| 122 |
% \end{macrocode} |
| 123 |
%</gobble> |
| 124 |
% \fi |
| 125 |
% \MakeShortVerb{|} |
| 126 |
% \GetFileInfo{adjmulticol.sty} |
| 127 |
% |
| 128 |
% \title{Adjusting Margins for Multicolumn and Unicolumn |
| 129 |
% Output\thanks{\copyright Boris Veytsman, 2022} \thanks{Note: This |
| 130 |
% package is released under terms which affect its use in commercial |
| 131 |
% applications. Please see the details at the top of the source file}} |
| 132 |
% \author{Boris Veytsman} |
| 133 |
% \date{\filedate, \fileversion} |
| 134 |
% \maketitle |
| 135 |
% |
| 136 |
% \begin{abstract} |
| 137 |
% This package provides an extension of the \textsf{multicol} |
| 138 |
% package~\cite{Mittelbach06:Multicol} with the option to change the |
| 139 |
% margins for multicolumn and unicolumn layout. The package understands the |
| 140 |
% difference between the even and odd margins for two side printing. |
| 141 |
% \end{abstract} |
| 142 |
% |
| 143 |
% \tableofcontents |
| 144 |
% |
| 145 |
% \clearpage |
| 146 |
% |
| 147 |
%\section{Introduction} |
| 148 |
%\label{sec:intro} |
| 149 |
% |
| 150 |
% |
| 151 |
% One of the common requests from the book designers is the |
| 152 |
% possibility to change the margins of the text in the midddle of the |
| 153 |
% page. The standard \LaTeX{} |list| environment does exactly this. |
| 154 |
% Thus it is not surprising that many packages creatively use this |
| 155 |
% tool to change the layout. An example is the \textsf{changepage} |
| 156 |
% package~\cite{Wilson09:Changepage}. Unfortunately this approach has |
| 157 |
% a seriour drawback: a list sets the margins globally. If the |
| 158 |
% material is split between the pages, the margins on the first page |
| 159 |
% are repeated on all the subsequent pages. While this is fine for |
| 160 |
% one-side printing, it leads to a catastrophe for the two-sided |
| 161 |
% one, as can be seen from the following example (provided by Ivo |
| 162 |
% Welch): |
| 163 |
% \begin{verbatim} |
| 164 |
% \documentclass{book} |
| 165 |
% \usepackage{lipsum,multicol} |
| 166 |
% \evensidemargin=1.5in |
| 167 |
% \oddsidemargin=-3em |
| 168 |
% \textwidth=5in |
| 169 |
% |
| 170 |
% \newenvironment{chmargin}[2]{% |
| 171 |
% \begin{list}{}{\topsep0pt\partopsep0pt\itemsep0pt\parsep\parskip% |
| 172 |
% \listparindent\parindent\itemindent\parindent |
| 173 |
% \leftmargin#1\rightmargin#2\relax}\item}% |
| 174 |
% {\end{list}} |
| 175 |
% |
| 176 |
% \begin{document} |
| 177 |
% |
| 178 |
% \chapter{Show} |
| 179 |
% \section{Normal} |
| 180 |
% \marginpar{I need a lot of outer margin space in the normal text.} |
| 181 |
% \lipsum[1-10] |
| 182 |
% \begin{chmargin}{0pt}{-160pt} |
| 183 |
% \section{End of Chapter Meterial} |
| 184 |
% \textbf{Now I want to use the outer margin because I need width.} |
| 185 |
% \lipsum[11-16] |
| 186 |
% \fbox{\textbf{\Large Darn---it extends into the inner spine margin now.}} |
| 187 |
% \lipsum[17-40] |
| 188 |
% \end{chmargin} |
| 189 |
% |
| 190 |
% \end{document} |
| 191 |
% \end{verbatim} |
| 192 |
% |
| 193 |
% |
| 194 |
% To remedy this problem, we need a completely different approach: we |
| 195 |
% need to change the output routine. This is done in this package. |
| 196 |
% |
| 197 |
% Since the text with the special layout is often typeset in the |
| 198 |
% multicolumn mode, we load the \textsf{multicol} |
| 199 |
% package~\cite{Mittelbach06:Multicol} and patch it to provide two |
| 200 |
% changes: |
| 201 |
% \begin{enumerate} |
| 202 |
% \item Margins changes, persistent over the pages. |
| 203 |
% \item The possibility of an one-column ``multicolumn'' layout. Of |
| 204 |
% course, this layout does not make sense in the context of the |
| 205 |
% original \textsf{multicol} package, but is useful when the |
| 206 |
% margins are changed. |
| 207 |
% \end{enumerate} |
| 208 |
% |
| 209 |
% Note that since this package uses the \textsf{multicol} package, it |
| 210 |
% inherits its special moral obligation for the commercial users. |
| 211 |
% Please see the source file for the details. |
| 212 |
% |
| 213 |
% This file was commissioned for by Prof.~Ivo Welch, |
| 214 |
% \url{http://www.ivo-welch.info/}. He also provided sample files |
| 215 |
% and patiently tested it. |
| 216 |
% |
| 217 |
%\section{User Interface} |
| 218 |
%\label{sec:interface} |
| 219 |
% |
| 220 |
% The installation of the class follows the usual |
| 221 |
% practice~\cite{TeXFAQ} for \LaTeX{} packages: |
| 222 |
% \begin{enumerate} |
| 223 |
% \item Run \textsf{latex} on |adjmulticol.ins|. This will produce the file |
| 224 |
% |adjmulticol.sty|. |
| 225 |
% \item Put the file |adjmulticol.sty| to |
| 226 |
% the place where \LaTeX{} can find them (see |
| 227 |
% \cite{TeXFAQ} or the documentation for your \TeX{} |
| 228 |
% system).\label{item:install} |
| 229 |
% \item Update the database of file names. Again, see \cite{TeXFAQ} |
| 230 |
% or the documentation for your \TeX{} system for the system-specific |
| 231 |
% details.\label{item:update} |
| 232 |
% \item The file |adjmulticol.pdf| provides the documentation for the |
| 233 |
% package (this is the file you are probably reading now). |
| 234 |
% \end{enumerate} |
| 235 |
% As an alternative to items~\ref{item:install} and~\ref{item:update} |
| 236 |
% you can just put the files in the working directory where your |
| 237 |
% |.tex| file is. |
| 238 |
% |
| 239 |
% |
| 240 |
% |
| 241 |
% To use this package, add to the preamble of your document |
| 242 |
% the line |\usepackage{adjmulticol}|. |
| 243 |
% |
| 244 |
% The package provides two new environments for adjusted multicolumn |
| 245 |
% layout. |
| 246 |
% |
| 247 |
% \DescribeEnv{adjmulticols} |
| 248 |
% The environment |adjmulticols| is similar to the environment |
| 249 |
% |multicols|, but it has three mandatory arguments instead of one: |
| 250 |
% \begin{quote} |
| 251 |
% |\begin{adjmulticols}|\marg{number}\marg{inner margin}\marg{outer |
| 252 |
% margin}\\ |
| 253 |
% \meta{text}\\ |
| 254 |
% |\end{adjmulticols}| |
| 255 |
% \end{quote} |
| 256 |
% For example, |
| 257 |
% \begin{verbatim} |
| 258 |
% \begin{adjmulticols}{2}{12pt}{-1in} |
| 259 |
% Text Text Text |
| 260 |
% \end{adjmulticols} |
| 261 |
% \end{verbatim} |
| 262 |
% Here \meta{number} is the number of columns. Unlike |multicols|, |
| 263 |
% |adjmulticols| environment allows this number to be 1. |
| 264 |
% |
| 265 |
% The \meta{inner margin} and \meta{outer margin} are calculated from |
| 266 |
% the current text area margins, so negative values mean the extension |
| 267 |
% of the text area. In one-sided printing \meta{inner margin} is the |
| 268 |
% left margin, and \meta{outer margin} is the right margin. You |
| 269 |
% probably would not want to use this package for one-sided printing, |
| 270 |
% since in this case \textsf{changepage} |
| 271 |
% package~\cite{Wilson09:Changepage} works fine. In two-sided |
| 272 |
% printing \meta{inner margin} is the margin on the spine side of the |
| 273 |
% page, and \meta{outer margin} is the margin on the other side. |
| 274 |
% |
| 275 |
% You can use the optional arguments of the |multicols| environment. |
| 276 |
% Note that the argument of the first optional argument, the header text |
| 277 |
% spread over all columns, is typeset with the \emph{normal} margins. |
| 278 |
% If you want to change margins for the header too, you may want to |
| 279 |
% use one-column |adjmulticols| environment instead. |
| 280 |
% |
| 281 |
% \DescribeEnv{adjmulticols*} |
| 282 |
% The starred version of the environment, |adjmulticols*| is similar |
| 283 |
% to the |multicols*| environment: it does not balance the columns on |
| 284 |
% the last page. |
| 285 |
% |
| 286 |
% |
| 287 |
% |
| 288 |
%\StopEventually{\clearpage |
| 289 |
% \bibliography{adjmulticol} |
| 290 |
% \bibliographystyle{unsrt}} |
| 291 |
% |
| 292 |
% \clearpage |
| 293 |
% |
| 294 |
% \section{Implementation} |
| 295 |
% \label{sec:implementation} |
| 296 |
% |
| 297 |
% |
| 298 |
%\subsection{Declarations} |
| 299 |
%\label{sec:decl} |
| 300 |
% |
| 301 |
% We start with declaration, who we are: |
| 302 |
% |
| 303 |
% |
| 304 |
% \begin{macrocode} |
| 305 |
%<style>\NeedsTeXFormat{LaTeX2e} |
| 306 |
%<*gobble> |
| 307 |
\ProvidesFile{adjmulticol.dtx} |
| 308 |
%</gobble> |
| 309 |
%<style>\ProvidesPackage{adjmulticol} |
| 310 |
%<*style> |
| 311 |
[2022/05/15 v1.5 Adjusted margins for multicolumn layout] |
| 312 |
% \end{macrocode} |
| 313 |
% |
| 314 |
% |
| 315 |
%\subsection{Options} |
| 316 |
%\label{sec:options} |
| 317 |
% |
| 318 |
% All options are sent to |multicols|: |
| 319 |
% \begin{macrocode} |
| 320 |
\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{multicol}} |
| 321 |
\ProcessOptions\relax |
| 322 |
% \end{macrocode} |
| 323 |
% |
| 324 |
% |
| 325 |
%\subsection{Loading Packages} |
| 326 |
%\label{sec:loading} |
| 327 |
% |
| 328 |
% We use |multicol| to get all the code from it: |
| 329 |
% \begin{macrocode} |
| 330 |
\RequirePackage{multicol} |
| 331 |
% \end{macrocode} |
| 332 |
% |
| 333 |
% |
| 334 |
%\subsection{Registers} |
| 335 |
%\label{sec:registers} |
| 336 |
% |
| 337 |
% \begin{macro}{\adjmc@inner} |
| 338 |
% Inner margin delta: left on odd pages, right on even pages for |
| 339 |
% two-sided typesetting, and left for one-sided typesetting. |
| 340 |
% \begin{macrocode} |
| 341 |
\newdimen\adjmc@inner |
| 342 |
% \end{macrocode} |
| 343 |
% \end{macro} |
| 344 |
% \begin{macro}{\adjmc@outer} |
| 345 |
% Outer margin delta: right on odd pages, left on even pages, and |
| 346 |
% right for two-sided typesetting |
| 347 |
% \begin{macrocode} |
| 348 |
\newdimen\adjmc@outer |
| 349 |
% \end{macrocode} |
| 350 |
% \end{macro} |
| 351 |
% |
| 352 |
% |
| 353 |
% \begin{macro}{\adjmc@saved@leftmargin} |
| 354 |
% We save the value of |\multicol@leftmargin| between the calls in |
| 355 |
% the register |\adjmc@savedleftmargin|: |
| 356 |
% \begin{macrocode} |
| 357 |
\newdimen\adjmc@saved@leftmargin |
| 358 |
% \end{macrocode} |
| 359 |
% |
| 360 |
% \end{macro} |
| 361 |
% |
| 362 |
%\subsection{Starting Environment} |
| 363 |
%\label{sec:start} |
| 364 |
% |
| 365 |
% \begin{macro}{\adjmulticols} |
| 366 |
% \changes{v1.3}{2022/03/27}{Do not try to balance one-column version} |
| 367 |
% \changes{v1.4}{2022/04/17}{Change the balancing of one-column} |
| 368 |
% We have three mandatory arguments instead of one for |multicols|: |
| 369 |
% the number of columns, the left margin delta and the right margin |
| 370 |
% delta: |
| 371 |
% \begin{macrocode} |
| 372 |
\def\adjmulticols#1#2#3{\col@number#1\relax |
| 373 |
\def\@tempa{#2}% |
| 374 |
\ifx\@tempa\@empty\adjmc@inner\z@\else\adjmc@inner#2\fi |
| 375 |
\def\@tempa{#3}% |
| 376 |
\ifx\@tempa\@empty\adjmc@outer\z@\else\adjmc@outer#3\fi |
| 377 |
% \end{macrocode} |
| 378 |
% The standard |multicols| have the minimum of two columns. We, of |
| 379 |
% course, want to consider one column layout too: |
| 380 |
% \begin{macrocode} |
| 381 |
\ifnum\col@number<\@ne |
| 382 |
\PackageWarning{adjmulticol}% |
| 383 |
{Using `\number\col@number' |
| 384 |
columns doesn't seem a good idea.^^J |
| 385 |
I therefore use one columns instead}% |
| 386 |
\col@number\@ne\fi |
| 387 |
\ifnum\col@number>10 |
| 388 |
\PackageError{adjmulticol}% |
| 389 |
{Too many columns}% |
| 390 |
{Current implementation doesn't |
| 391 |
support more than 10 columns.% |
| 392 |
\MessageBreak |
| 393 |
I therefore use 10 columns instead}% |
| 394 |
\col@number10 \fi |
| 395 |
\ifnum\col@number=\@ne\relax |
| 396 |
\let\balance@columns\adjmc@process@ne@column |
| 397 |
\fi |
| 398 |
% \end{macrocode} |
| 399 |
% |
| 400 |
% |
| 401 |
% As in the standard package we redefine the footnote making command: |
| 402 |
% \begin{macrocode} |
| 403 |
\ifx\@footnotetext\mult@footnotetext\else |
| 404 |
\let\orig@footnotetext\@footnotetext |
| 405 |
\let\@footnotetext\mult@footnotetext |
| 406 |
\fi |
| 407 |
% \end{macrocode} |
| 408 |
% And look for the optional arguments |
| 409 |
% \begin{macrocode} |
| 410 |
\@ifnextchar[\adjmult@cols{\adjmult@cols[]}} |
| 411 |
% \end{macrocode} |
| 412 |
% \end{macro} |
| 413 |
% |
| 414 |
% \begin{macro}{\adjmult@cols} |
| 415 |
% Looking for the second optional argument. Note that we use |
| 416 |
% |\premulticols| for the default: |
| 417 |
% \begin{macrocode} |
| 418 |
\def\adjmult@cols[#1]{\@ifnextchar[% |
| 419 |
{\adjmult@@cols{#1}}% |
| 420 |
{\adjmult@@cols{#1}[\premulticols]}} |
| 421 |
% \end{macrocode} |
| 422 |
% \end{macro} |
| 423 |
% |
| 424 |
% \begin{macro}{\adjmult@@cols} |
| 425 |
% And now we are gathered all arguments: |
| 426 |
% \begin{macrocode} |
| 427 |
\def\adjmult@@cols#1[#2]{% |
| 428 |
% \end{macrocode} |
| 429 |
% The macro |\prepare@multicols| uses the current value of |
| 430 |
% |\linewidth|. We do not change his, but rather change |\linewidth|: |
| 431 |
% \begin{macrocode} |
| 432 |
\advance\linewidth by -\adjmc@inner\relax |
| 433 |
\advance\linewidth by -\adjmc@outer\relax |
| 434 |
% \end{macrocode} |
| 435 |
% Then we redefine the output routines: |
| 436 |
% \begin{macrocode} |
| 437 |
\let\page@sofar=\adjmc@page@sofar |
| 438 |
% \end{macrocode} |
| 439 |
% and start the standard multicols: |
| 440 |
% \begin{macrocode} |
| 441 |
\mult@@cols#1[#2]} |
| 442 |
% \end{macrocode} |
| 443 |
% \end{macro} |
| 444 |
% |
| 445 |
% |
| 446 |
% |
| 447 |
% \begin{macro}{\set@mult@vsize} |
| 448 |
% \changes{v1.1}{2013/01/20}{Redefined macro} |
| 449 |
% The formula for |\vsize| in multicols seem to work only for |
| 450 |
% column number above 2. Here we add special case of 1. |
| 451 |
% \begin{macrocode} |
| 452 |
\def\set@mult@vsize#1{% |
| 453 |
\vsize\@colroom |
| 454 |
\@tempdima\baselineskip |
| 455 |
\advance\@tempdima-\topskip |
| 456 |
\advance\vsize\@tempdima |
| 457 |
\vsize\col@number\vsize |
| 458 |
\advance\vsize-\@tempdima |
| 459 |
\ifnum\col@number>1\relax |
| 460 |
\advance\vsize\col@number\baselineskip |
| 461 |
\else |
| 462 |
\advance\vsize-2\baselineskip |
| 463 |
\fi |
| 464 |
#1\advance\vsize |
| 465 |
\c@collectmore\baselineskip} |
| 466 |
% \end{macrocode} |
| 467 |
% \end{macro} |
| 468 |
% |
| 469 |
%\subsection{Ending Environment} |
| 470 |
%\label{sec:end} |
| 471 |
% |
| 472 |
% \begin{macro}{\endadjmulticols} |
| 473 |
% \changes{v1.2}{2020/03/06}{Redefined macro} |
| 474 |
% \changes{v1.3}{2022/03/27}{Added \cs{vfill} for one-column environment} |
| 475 |
% Here we use the standard environment end. Note that it uses |
| 476 |
% |\@checkend|, so we need to redefine it to fool the |
| 477 |
% check. We need to do it globally to work inside a box too. |
| 478 |
% \begin{macrocode} |
| 479 |
\def\endadjmulticols{% |
| 480 |
\global\let\@ADJMC@checkend\@checkend |
| 481 |
\gdef\@checkend##1{}% |
| 482 |
\ifnum\col@number=\@ne\relax\vfill\fi |
| 483 |
\endmulticols |
| 484 |
\global\let\@checkend\@ADJMC@checkend} |
| 485 |
% \end{macrocode} |
| 486 |
% \end{macro} |
| 487 |
% |
| 488 |
% |
| 489 |
% |
| 490 |
%\subsection{Output Routines} |
| 491 |
%\label{sec:output} |
| 492 |
% |
| 493 |
% \begin{macro}{\adjmc@page@sofar@orig} |
| 494 |
% First, we save the original declaration of |\page@sofar|: |
| 495 |
% \begin{macrocode} |
| 496 |
\let\adjmc@page@sofar@orig=\page@sofar |
| 497 |
% \end{macrocode} |
| 498 |
% |
| 499 |
% \end{macro} |
| 500 |
% |
| 501 |
% |
| 502 |
% \begin{macro}{\adjmc@page@sofar} |
| 503 |
% \changes{v1.4}{2022/04/17}{No longer copying boxes for one column |
| 504 |
% version} |
| 505 |
% We redefine |\page@sofar| to change the margins and allow for |
| 506 |
% one-column output: |
| 507 |
% \begin{macrocode} |
| 508 |
\def\adjmc@page@sofar{% |
| 509 |
% \end{macrocode} |
| 510 |
% We redefine |\multicol@leftmargin| to introduce the shift of the |
| 511 |
% box. We save the old code in |\adjmc@saved@leftmargin| |
| 512 |
% \begin{macrocode} |
| 513 |
\adjmc@saved@leftmargin=\multicol@leftmargin |
| 514 |
\if@twoside |
| 515 |
\ifodd\c@page |
| 516 |
\advance\multicol@leftmargin by \adjmc@inner\relax |
| 517 |
\else |
| 518 |
\advance \multicol@leftmargin by \adjmc@outer\relax |
| 519 |
\fi |
| 520 |
\else |
| 521 |
\advance \multicol@leftmargin by \adjmc@inner\relax |
| 522 |
\fi |
| 523 |
% \end{macrocode} |
| 524 |
% Then we invoke the original |\page@sofar| and restore the margin: |
| 525 |
% \begin{macrocode} |
| 526 |
\adjmc@page@sofar@orig |
| 527 |
\multicol@leftmargin=\adjmc@saved@leftmargin} |
| 528 |
% \end{macrocode} |
| 529 |
% |
| 530 |
% \end{macro} |
| 531 |
% |
| 532 |
% \begin{macro}{\adjmc@process@ne@column} |
| 533 |
% \changes{v1.4}{2022/04/17}{Added macro} |
| 534 |
% \changes{v1.5}{2022/05/15}{Added \cs{vfill}} |
| 535 |
% If we have one column, we do not need to balance it. Mostly stolen |
| 536 |
% from |multicol.sty| |
| 537 |
% \begin{macrocode} |
| 538 |
\def\adjmc@process@ne@column{% |
| 539 |
\setbox\mult@firstbox\vbox{\unvbox\mult@box\vfill}} |
| 540 |
% \end{macrocode} |
| 541 |
% |
| 542 |
% |
| 543 |
% \end{macro} |
| 544 |
% |
| 545 |
%\subsection{Not Balancing Columns} |
| 546 |
%\label{sec:not_balance} |
| 547 |
% |
| 548 |
% The starred versions do not balance the columns. |
| 549 |
% |
| 550 |
% \begin{macro}{\adjmulticols*} |
| 551 |
% \changes{v1.4}{2022/04/17}{Special code for one column version} |
| 552 |
% This follows the code of the \textsf{multicols} package with the |
| 553 |
% special check for one column: |
| 554 |
% \begin{macrocode} |
| 555 |
\newenvironment{adjmulticols*}{% |
| 556 |
\ifinner |
| 557 |
\PackageWarning{multicol}% |
| 558 |
{multicols* inside a box does |
| 559 |
not make sense.\MessageBreak |
| 560 |
Going to balance anyway}% |
| 561 |
\else |
| 562 |
\ifnum\col@number=\@ne\relax |
| 563 |
\let\balance@columns\adjmc@process@ne@column |
| 564 |
\else |
| 565 |
\let\balance@columns@out\multi@column@out |
| 566 |
\fi |
| 567 |
\fi |
| 568 |
\adjmulticols}{% |
| 569 |
\vfill |
| 570 |
\endadjmulticols} |
| 571 |
% \end{macrocode} |
| 572 |
% |
| 573 |
% \end{macro} |
| 574 |
% |
| 575 |
% |
| 576 |
%\subsection{Ending the Style} |
| 577 |
%\label{sec:end} |
| 578 |
% |
| 579 |
% |
| 580 |
% |
| 581 |
% \begin{macrocode} |
| 582 |
%</style> |
| 583 |
% \end{macrocode} |
| 584 |
%\Finale |
| 585 |
%\clearpage |
| 586 |
% |
| 587 |
%\PrintChanges |
| 588 |
%\clearpage |
| 589 |
%\PrintIndex |
| 590 |
% |
| 591 |
\endinput |