Debian Codegraph @

texmf-dist/source/fonts/feyn/feyn.dtx

raw
1 % \iffalse
2 % This is feyn.dtx, which manages the use of the feyn Metafont
3 %
4 %% This software is copyright 1991, 1994, 2001-2, 2005, 2008-17, Norman Gray.
5 %% It is distributed under the terms of the 2-clause BSD Licence;
6 %% see the file LICENCE for details.
7 %
8 %<+package|driver>%% VCS Info: Mercurial revision 0a471f8ed572, 2022-07-20 11:23 +0100, tag 0.4.3 + 0
9 %<+package>\NeedsTeXFormat{LaTeX2e}
10 %<+package>\ProvidesPackage{feyn}[2022/07/20 0.4.3]
11 %<+package>\typeout{Package: `feyn' 0.4.3 <2022/07/20>}
12 %
13 %<*driver>
14 \documentclass{ltxdoc}
15 \usepackage{feyn}
16 \title{The feyn font}
17 \author{Norman Gray\\(\texttt{https://nxg.me.uk})}
18 \date{Version 0.4.3, 2022 July 20}
19 \newcommand\Lopt[1]{\textsf {#1}}
20 \newcommand\file[1]{\texttt {#1}}
21 \newcommand\Lcount[1]{\textsl {\small#1}}
22 \newcommand\pstyle[1]{\textsl {#1}}
23 %% \url macro (url.sty does this better)
24 \def\setpathdots{\discretionary{.}{}{.}}
25 \def\setpathslash{\discretionary{/}{}{/}}
26 {\catcode`\.=\active
27 \catcode`\/=\active
28 \gdef\pathcats{%
29 \catcode`\%=12 \catcode`\~=12
30 \catcode`\.=\active \let.\setpathdots
31 \catcode`\/=\active \let/\setpathslash
32 \catcode`\#=12 \catcode`\_=12}%
33 }
34 \def\setpath#1{\ttfamily <\nobreak #1\nobreak>\endgroup}
35 \def\url{\begingroup\pathcats\setpath}
36 %\RecordChanges
37 \OnlyDescription
38 \parskip=\medskipamount
39 \parindent=0pt
40 \begin{document}
41 \maketitle
42 \DocInput{feyn.dtx}
43 \end{document}
44 %</driver>
45 %
46 % \fi
47 %
48 %
49 %
50 %% \CharacterTable
51 %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
52 %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
53 %% Digits \0\1\2\3\4\5\6\7\8\9
54 %% Exclamation \! Double quote \" Hash (number) \#
55 %% Dollar \$ Percent \% Ampersand \&
56 %% Acute accent \' Left paren \( Right paren \)
57 %% Asterisk \* Plus \+ Comma \,
58 %% Minus \- Point \. Solidus \/
59 %% Colon \: Semicolon \; Less than \<
60 %% Equals \= Greater than \> Question mark \?
61 %% Commercial at \@ Left bracket \[ Backslash \\
62 %% Right bracket \] Circumflex \^ Underscore \_
63 %% Grave accent \` Left brace \{ Vertical bar \|
64 %% Right brace \} Tilde \~}
65 %
66 % \CheckSum{680}
67 %
68 %
69 %
70 %
71 % \newcommand{\pslash}{p\llap{/\kern-0.3pt}}
72 % \newcommand{\feynx}{\pstyle{feyn}}
73 % \newcommand{\metafont}{Metafont}
74 %
75 %
76 %
77 % This document describes the font \feynx, which can be used to produce relatively
78 % simple Feynman diagrams within equations in a \LaTeX\ document. The
79 % package and font aims to be capable of producing all of the diagrams
80 % of one- and two-loop QED and QCD, plus $\phi^4$ theory.
81 %
82 % The other Feynman diagram package which exists is Thorsten Ohl's
83 % \textsl{feynmf}/\textsl{feynmp} package. That
84 % works by creating \metafont\ or MetaPost figures using a preprocessor.
85 % It's more general than this package, but is at its best when
86 % creating relatively large diagrams, for figures.
87 % In contrast, the present system consists of a carefully-designed font
88 % with which you can easily write simple diagrams, within equations or within text,
89 % in a size matching the surrounding text size.
90 %
91 % \iftrue
92 % \textbf{Contents:}
93 % \def\numberline#1{\space\emph{\S#1}~}
94 % \def\contentsline#1#2#3{#2,~p#3;}
95 % \makeatletter \@starttoc{toc} \makeatother
96 % \fi
97 %
98 % \subsection*{Status}
99 %
100 % The propagators and vertices which are implemented are those of one-
101 % and two-loop QED and QCD, plus $\phi^4$ theory, plus a few extras
102 % which commonly appear in non-figure displays (the practical
103 % definition of `commonly appear' is: `which I wanted' or `which
104 % people asked me for'). I'd be delighted to add others which folk
105 % feel would be useful, as long as they're still in the rather simple
106 % scope of the font.
107 %
108 % \newpage
109 % \section{Description}
110 %
111 % You use the font by including the package \texttt{feyn.sty}, as in
112 % \begin{verbatim}
113 % \usepackage{feyn}
114 % \end{verbatim}
115 % If you use the `amsmath' package, you should load that before
116 % loading the `feyn' package.\footnote{Because of a slight peculiarity
117 % of the amsmath package, the active~`!' command described below will
118 % not work properly within amsmath |{align}| or |{align*}|
119 % environments unless the~`!' is made active globally. This is done
120 % by default if the `amsmath' package is loaded first, and not done by
121 % default otherwise. If you have to override this behaviour for some
122 % very arcane reason, then you can force the global or local declaration
123 % of~`!' using the \Lopt{globalbang} and \Lopt{noglobalbang} options
124 % to the \texttt{$\backslash$usepackage\{feyn\}} command.}
125 %
126 % You write Feynman diagrams in text by writing a sequence of letters
127 % in the maths-mode \feynx\ font, selected with |\Feyn{...}| in text
128 % style and |\feyn{...}| in displays. Most of the characters in the
129 % font are selected using ligatures, so that |\feyn{f}| produces a
130 % fermion propagator, $\feyn{f}$., but |\feyn{fs}| produces a short
131 % fermion, $\feyn{fs}$ and |\feyn{fA}| produces an arrowed one,
132 % $\feyn{fA}$. See below for more detailed description of how to use
133 % the font.
134 %
135 % \makeatletter
136 % \def\refptcirc{\lower\feyn@maxis \hbox to 0pt{\hss$\circ$\hss}}
137 % \makeatother
138 % \begin{table}
139 % \def\tableskip{\noalign{\smallskip}}
140 % \halign{$\refptcirc\Feyn{#}$%
141 % \hfil\quad & $#$\hfil\quad & # \hfil\qquad && # \cr
142 % \omit Character & \omit & Name & Width & Height & Depth \cr
143 % \noalign{\smallskip\hrule\smallskip}
144 % f & f & fermion$^{\dag}$
145 % & 2 & 0 & 0 \cr \tableskip
146 % fs & fs & short fermion
147 % & 1 & 0 & 0 \cr \tableskip
148 % fl & fl & fermion loop$^{\dag\ddag}$
149 % & 0 & $2-$ & 0 \cr \tableskip
150 % flS & flS & fermion loop (small)$^{\dag\ddag}$
151 % & 0 & 1 & 0 \cr \tableskip
152 % flo & flo & fermion loop (for $\phi^4$ theory)$^{\dag}$
153 % & 0 & 2 & 0 \cr \tableskip
154 % fu & fu & upward fermion$^\dag$ (45$^\circ$)
155 % & $\sqrt2$ & $\sqrt2$ & 0 \cr \tableskip
156 % fd & fd & downward fermion$^\dag$
157 % & $\sqrt2$ & $\sqrt2$ & 0 \cr \tableskip
158 % fv & fv & vertical fermion$^\dag$
159 % & 0 & 2 & 0 \cr \tableskip
160 % f0 & f0 & spacer
161 % & 2 & 0 & 0 \cr \tableskip
162 % fs0 & fs0 & short spacer
163 % & 1 & 0 & 0 \cr \tableskip
164 % g & g & gluon/photon$^{\dag}$
165 % & 2 & 0 & 0 \cr \tableskip
166 % gl & gl & gluon loop$^{\dag\ddag}$
167 % & 0 & $2-$ & 0 \cr \tableskip
168 % glB & glB & gluon loop (big)$^{\dag}$
169 % & 0 & 2.67 & 0 \cr \tableskip
170 % glS & glS & gluon loop (small)$^{\dag}$
171 % & 0 & 1.33 & 0 \cr \tableskip
172 % g1\quad g2 & g1, g2 & gluon loop, 1st \& 2nd quadrants$^{\dag}$
173 % & 0 & 2 & 0 \cr \tableskip
174 % g4\quad g3 & g4, g3 & gluon loop, 4th \& 3rd quadrants$^{\dag}$
175 % & 0 & 0 & -2 \cr \tableskip
176 % gu & gu & upward gluon$^\dag$ (45$^\circ$)
177 % & $\sqrt2$ & $\sqrt2$ & 0 \cr \tableskip
178 % gd & gd & downward gluon$^\dag$
179 % & $\sqrt2$ & $\sqrt2$ & 0 \cr \tableskip
180 % gv & gv & vertical gluon$^\dag$
181 % & 0 & 2 & 0 \cr \tableskip
182 % m & m & massive fermion$^{\dag}$
183 % & 2 & 0 & 0 \cr \tableskip
184 % ms & ms & short massive fermion
185 % & 1 & 0 & 0 \cr \tableskip
186 % h & h & ghost$^{\dag}$
187 % & 2 & 0 & 0 \cr \tableskip
188 % hs & hs & short ghost
189 % & 1 & 0 & 0 \cr \tableskip
190 % hu & hu & upward ghost$^{\dag}$ (45$^\circ$)
191 % & $\sqrt2$ & $\sqrt2$ & 0 \cr \tableskip
192 % hd & hd & downward ghost$^{\dag}$
193 % & $\sqrt2$ & $\sqrt2$ & 0 \cr \tableskip
194 % hl & hl & ghost loop$^{\dag\ddag}$
195 % & 0 & $2-$ & 0 \cr\tableskip
196 % x & x & counterterm vertex & 0 & $a$ & $-a$ \cr \tableskip
197 % p & p & proper vertex & - & - & - \cr \tableskip
198 % P & P & proper vertex (variant) & - & - & - \cr \tableskip
199 % c & c & complete vertex & - & - & - \cr \tableskip
200 % a & a & arrow$^\dag$ & 0 & 0 & 0 \cr
201 % }
202 % \caption{\label{chars} The characters in font \feynx, and their
203 % reference points, marked with circles. Characters
204 % marked~$\dag$ have arrowed variants indicated with~`A' and~`V' suffixes;
205 % and characters marked~$\ddag$ have an upside-down variant
206 % indicated with a `u' suffix. The `u' must come before the `A' or
207 % `V'. Character `a' has an `arrowed variant' in the sense that `aV'
208 % produces a backward arrow. A length of `$2-$' indicates a length
209 % slightly less than two units, for aesthetic reasons.}
210 % \end{table}
211 %
212 % The characters in the font are shown in table~\ref{chars}.
213 % These are shown in textstyle size, but all characters are also available in
214 % displaystyle size.
215 % All of the displaystyle characters are additionally offset vertically
216 % up to the math axis, which has height~$a$.
217 % All the dimensions are shown as multiples of the
218 % length of a module which is the length of the short fermion.
219 % The~$\circ$ shows the reference point of each character.
220 % The proper vertex and the complete vertex are specified
221 % in terms of a `blob-radius' which is about half a module.
222 % They have a width of 2~radii, and a height and depth of 1~radius.
223 %
224 % Each of the characters marked with a~$\dag$ in the table has two
225 % arrowed variants, so that |\feyn{fA + gV}| produces $\feyn{fA +
226 % gV}$. The `A' variants produce arrows pointing rightwards or
227 % upwards, and the `V' variants arrows pointing leftwards or
228 % downwards. The characters marked with a~$\ddag$ also have an
229 % upside-down variant, thus `flu' is an upside-down variant of the
230 % fermion loop, and `fluV' an arrowed variant.
231 %
232 % Note that the fermion, gluon and ghost half-loop characters are
233 % slightly shorter than the height you might expect. These characters
234 % are deliberately slightly squashed partly because that makes them
235 % look slightly better (in my opinion!) in a one-loop self-energy
236 % diagram, but also so that the `gl glu' or `fl flu' loop in a
237 % two-loop diagram looks better. The loop formed by the pair of `g1
238 % g2' is the size you might expect. See section~\ref{s:examples} below
239 % for some illustrations of this.
240 %
241 % The unnassigned positions in the \feynx\ font are filled
242 % with an obviously wrong dummy character, so that |$\feyn{A}$|, for example,
243 % produces $\feyn{fs0Afs0}$. This should help at least some
244 % mistypings stand out.
245 %
246 % If you were to print out a font table, you would discover that many
247 % of the glyphs in the font can be obtained using single
248 % characters, rather than the ligatures mentioned in the table. Do
249 % not be tempted to use this as a shortcut, since the assignment of
250 % glyphs to character positions may be changed without warning from release to
251 % release, as long as the ligature maps remain valid.
252 %
253 % The file \file{feyn.sty} additionally defines a number of macros,
254 % described here.
255 % \begin{description}
256 % \item[\cs{feyn}] Selects the diagram font, in display style -- that
257 % is, suitable for a displayed equation. This must be used
258 % within math mode. \cs{Feyn} selects the textstyle diagram font.
259 % \item[\cs{momentum}\{ch\}\{text\}] sets the character
260 % `ch', which may be a ligature, and puts the given text at the recommended
261 % annotation position for that character. |\momentum[pos]{ch}{text}|
262 % is the same, except that the optional argument indicates the
263 % position relative to the annotation position. It must be one of
264 % `top', `urt', `lrt', `bot', `llft' or `ulft'. This is rarely
265 % used as such, since the |\feyn| and |\Feyn|
266 % commands make~`!' a temporarily active character, and define it
267 % to be |\momentum|. See section~\ref{s:examples} for
268 % examples and further discussion.
269 % \item[\cs{belowl\{\}}] A common pattern in diagrams is to have a pair
270 % of incoming or outgoing propagators. If the lower one of this
271 % pair is enclosed within |\belowl{...}|, then it is set so that it
272 % occupies zero horizontal space, and moved leftwards and
273 % downwards, to fit under the upper of the pair of propagators.
274 % The command |\belowr{...}| is the same, except that the argument
275 % is moved rightwards.
276 % See examples below.
277 % \item[\cs{Diagram\{\}}] This is for building more complicated diagrams. It
278 % takes one argument, which is like the contents of an \texttt{\{array\}}
279 % environment---a series of formulae separated by \&'s and \verb-\\-. See
280 % below for an example. The result is a box on the math-axis.
281 % \item[\cs{maxis}] Raises a formula to the math-axis, which is
282 % occasionally useful within in-text equations: eg
283 % |$\Feyn{fglf} - \maxis{\Feyn{faf}}$| produces
284 % $\Feyn{fglf} - \maxis{\Feyn{faf}}$.
285 % \item[\cs{vertexlabel\{p\}\{text\}}] Allows you to label a vertex. If
286 % the first parameter~$p$ is~$\wedge$, the~\emph{text} is placed above the
287 % point at which the command is given, if it is~\texttt{\_}, it is
288 % placed below. For example, |$\feyn{f\vertexlabel^{a}}$| produces
289 % $\feyn{f\vertexlabel^{a}}$. More often used within |\Diagram|
290 % than elsewhere.
291 % \item[\cs{feynstrut\{h\}\{d\}}] For use within an (eqn)array environment, or
292 % the like. It modifies the control sequence \verb-\strut- to be a strut of
293 % height~$h$ and depth~$d$ modules, which can therefore be used to
294 % space the array out. Note that it modifies |\strut|, rather
295 % than being the strut itself.
296 % \item[\cs{annotate\{x\}\{y\}\{text\}}] Puts the \emph{text}, between dollars,
297 % in a zero width box at offset~$(x,y)$ modules from the position of the
298 % |\annotate| command (which is generally the first command(s) after
299 % entering math-mode). Because the \emph{text} is in math-mode, anything
300 % that is not maths should be in an |\mbox|. You will probably
301 % use this only rarely, as the |\momentum| command supports most
302 % of the annotation you will need.
303 % \end{description}
304 %
305 % The \feynx\ font is modular, in the sense that all the
306 % dimensions are in terms of a module of 10pt, and all sizes given
307 % below are in units of modules. As well as 10pt, the font has
308 % versions for 11pt, 12pt, 18pt and 24pt text, and the most
309 % appropriate one is selected depending on the text size declared (or
310 % defaulted) in the |\documentclass| command. This range of sizes
311 % seems to be appropriate for the sizes required, but the author would
312 % welcome comments on this. The distribution
313 % contains a sample file using the 18pt \feynx\ font in a
314 % \texttt{foiltex} document.
315 %
316 % You draw a diagram by going into math-mode (between \$\dots\$), and selecting
317 % the diagrams font by the font-changing command \verb-\feyn{}-
318 % (exactly as you might use \verb-\mathrm- in math-mode). With a couple of
319 % exceptions, all the characters are obtained by typing a single
320 % letter, or a couple of letters which form a ligature, so that the
321 % letter~$f$ in the diagrams font (\verb-$\feyn{f}$-) produces a
322 % fermion of length~2 (modules), and~$fs$ produces a short fermion of
323 % length~1. As usual in maths mode, space characters are ignored, so
324 % you can add whitespace as required to make the expressions more
325 % legible. Some of the more heavily used characters are available in
326 % both display size and text size, with the text-size version invoked
327 % by |\Feyn{...}|, so that |\feyn{fglf}| gives $\feyn{fglf}$ and
328 % |\Feyn{fglf}| gives $\Feyn{fglf}$. The displaystyle characters
329 % are all on the math-axis, the textstyle ones are on the text line.
330 %
331 % The display and text sizes of diagrams (that is, as produced by
332 % |\feyn| and |\Feyn| respectively) are intended to be used
333 % within equations, and they are sized accordingly. When diagrams
334 % have significantly complicated annotation, however, this size can
335 % look unhelpfully cramped, and it is for this case that there is an
336 % `extended' set of diagram characters, which are approximately double
337 % the size, and are available, in |\displaystyle| only, with the
338 % |\FEYN| and |\DIAGRAM| macros. These are used exactly like the
339 % |\feyn| and |\Diagram| macros. Note
340 % that the line width, the module used by the (rare) |\annotate| command, and the math
341 % axis, do not change from the sizes they have for the |\feyn|
342 % command. That is, this font is \emph{not} the appropriate one to
343 % use if you simply want a larger font size -- in that case, simply
344 % increase the \LaTeX\ font size and the \feynx\ font will change in
345 % size accordingly. See below for an example of the use of |\FEYN|.
346 %
347 % \subsection{More complicated diagrams}
348 %
349 % \newdimen\halftextwidth
350 % \halftextwidth=\textwidth
351 % \advance\halftextwidth by -\tabcolsep
352 % \advance\halftextwidth by -\arrayrulewidth
353 % \divide\halftextwidth by 2
354 % \newenvironment{codeexample}
355 % {\vskip\medskipamount
356 % \def\Becomes{\cr
357 % \noalign{\vrule width \arrayrulewidth \hskip\tabcolsep}}
358 % \valign\bgroup
359 % \hrule height 0pt depth 0pt width \halftextwidth
360 % \hsize=\halftextwidth
361 % \vfil ## \vfil \cr}
362 % {\crcr\egroup
363 % \vskip\medskipamount}
364 % \newenvironment{examplerhs}{\begin{minipage}[t]{\halftextwidth}}
365 % {\\ \end{minipage}}
366 %
367 %
368 % The \feynx\ font is designed so that simple diagrams are simple to
369 % produce, and are as far as possible writable as a single line of
370 % characters. There are a couple of more complicated diagrams which
371 % are drawable without too much effort.
372 %
373 % A common pattern in diagrams is to have a pair
374 % of incoming or outgoing propagators. If the lower one of this
375 % pair is enclosed within |\belowl{...}|, then it is set so that it
376 % occupies zero horizontal space, and moved leftwards and
377 % downwards, to fit under the upper of the pair of propagators. For
378 % example the sequence |\feyn{f gu \belowl{fd}}| would put the downward
379 % fermion directly below the upward gauge boson. See below for this
380 % and other examples.
381 %
382 % The second way of composing more complicated diagrams is to use the
383 % |\Diagram| macro. This allows you to lay out a diagram in an
384 % array-like environment, each cell of which is set within a
385 % |\feyn{...}| macro. On the right is the same diagram drawn with
386 % lines indicating the boundaries between the cells.
387 % \begin{codeexample}
388 % \begin{verbatim}
389 % \Diagram{ & x \\
390 % fs & gv f & gu \\
391 % & & fd }
392 % \end{verbatim}
393 % \Becomes
394 % \begin{examplerhs}$
395 % \Diagram{ & x \\
396 % fs & gv f & gu \\
397 % & & fd }
398 % \qquad\left(\quad
399 % \makeatletter
400 % \Diagram{ &\vrule x &\vrule height \feyn@maxis \\
401 % \hline fs &\vrule gv f &\vrule height \feyn@module gu \\
402 % \hline &\vrule height 0.7\feyn@module &\vrule fd \\
403 % \iffalse \hline &\vrule height \feyn@module &\vrule\fi
404 % }
405 % \quad\right)
406 % $\end{examplerhs}
407 % \end{codeexample}
408 %
409 % The |\Diagram| and |\DIAGRAM| macros take an optional argument of
410 % either `centre' or `bottom': with `centre', the diagram is centred
411 % on the math axis, with `bottom' the reference point of the diagram
412 % is the reference point of the bottom-most row of the array. The
413 % default is `centre'.
414 %
415 % Before the introduction of the |\belowl| macro in \feynx~v0.4, this
416 % was the only way to produce this pair of angled propagators one on
417 % top of the other. With |\belowl|, however, an alternative way of
418 % producing this diagram is as shown below.
419 % \begin{codeexample}
420 % \begin{verbatim}
421 % \feyn{fs
422 % \Diagram[bottom]{x\\gv}
423 % f gu\belowl{fd}}
424 % \end{verbatim}
425 % \Becomes
426 % \begin{examplerhs}$
427 % \feyn{fs
428 % \Diagram[bottom]{x\\gv}
429 % f gu\belowl{fd}}
430 % $\end{examplerhs}
431 % \end{codeexample}
432 %
433 % Diagrams much more complicated than this are probably better dealt
434 % with using Thorsten Ohl's \textsl{feynmf/feynmp} package.
435 %
436 % \section{Examples}
437 % \label{s:examples}
438 %
439 % A simple propagator:
440 % \begin{codeexample}
441 % \begin{verbatim}
442 % \feyn{\vertexlabel^a
443 % !{fA}p \vertexlabel^b}
444 % = \displaystyle
445 % \frac{i\delta^{ab}}
446 % {\pslash-m_0}}
447 % \end{verbatim}
448 % \Becomes
449 % \begin{examplerhs}$
450 % \feyn{\vertexlabel^a
451 % !{fA}p \vertexlabel^b}
452 % = \displaystyle
453 % \frac{i\delta^{ab}}{\pslash-m_0}
454 % $\end{examplerhs}
455 % \end{codeexample}
456 %
457 % The |\Diagram| command lays out its arguments as an array.
458 % \begin{codeexample}
459 % \begin{verbatim}
460 % \Diagram{\vertexlabel^a \\
461 % fd \\
462 % & g\vertexlabel_{\mu,c} \\
463 % \vertexlabel_b fu\\
464 % }
465 % = ig\gamma_\mu (T^c)_{ab}
466 % \end{verbatim}
467 % \Becomes
468 % \begin{examplerhs}$
469 % \Diagram{\vertexlabel^a \\
470 % fd \\
471 % & g\vertexlabel_{\mu,c} \\
472 % \vertexlabel_b fu\\
473 % }
474 % = ig\gamma_\mu (T^c)_{ab}
475 % $\end{examplerhs}
476 % \end{codeexample}
477 % The |\Diagram| is here necessary only for the vertex labels.
478 % Without those, it would be as simple as:
479 % \begin{codeexample}
480 % \begin{verbatim}
481 % \feyn{fd \belowl{fu} g
482 % = ig\gamma_\mu (T^c)_{ab}}
483 % \end{verbatim}
484 % \Becomes
485 % \begin{examplerhs}$
486 % \feyn{fd \belowl{fu} g} = ig\gamma_\mu (T^c)_{ab}
487 % $\end{examplerhs}
488 % \end{codeexample}
489 %
490 % An assortment of two-loop diagrams:
491 % \begin{codeexample}
492 % \begin{verbatim}
493 % \feyn{fs f gl f glu f fs}
494 % \end{verbatim}
495 % \Becomes
496 % $\feyn{fs f gl f glu f fs}$
497 % \end{codeexample}
498 % This is a ``short-fermion fermion gluon-loop fermion
499 % gluon-loop-upsidedown fermion short-fermion''.
500 %
501 % We can include vertical gluons:
502 % \begin{codeexample}
503 % \begin{verbatim}
504 % \feyn{ms mA g1 gv g2 ms x f}
505 % \end{verbatim}
506 % \Becomes
507 % $\feyn{ms mA g1 gv g2 ms x f}$
508 % \end{codeexample}
509 % Note, in this example, that the gluon loop is formed by a pair of
510 % `g1 g2' characters. This is because the `gl' half-loop character is
511 % deliberately slightly squashed, and wouldn't meet the vertical gluon
512 % properly. The half-loop character is squashed (as are
513 % the fermion and ghost half-loops) partly because it looks
514 % slightly better in a one-loop self-energy diagram, but also so that
515 % the `gl glu' two-gluon loop in a two-loop diagram looks better:
516 % \begin{codeexample}
517 % \begin{verbatim}
518 % \Diagram{&gl glu\\
519 % fsf g1 f&f g2 ffs \\}
520 % \end{verbatim}
521 % \Becomes
522 % \begin{examplerhs}$
523 % \Diagram{&gl glu\\
524 % fsf g1 f&f g2 ffs \\}
525 % $\end{examplerhs}
526 % \end{codeexample}
527 % The diagrams for `hl hlu' or `flA fluV', for example, are very similar.
528 %
529 % The |\momentum| command (more usually called with simply the~`!'
530 % character) allows you to annotate a propagator with a momentum or a
531 % particle label. For example
532 % \begin{codeexample}
533 % \begin{verbatim}
534 % \feyn{fA + !{fA}{p} + ![bot]{fA}{p}}
535 % \end{verbatim}
536 % \Becomes
537 % \begin{examplerhs}$
538 % \feyn{fA + !{fA}{p} + ![bot]{fA}{p}}
539 % $\end{examplerhs}
540 % \end{codeexample}
541 %
542 % \begin{codeexample}
543 % \begin{verbatim}
544 % \feyn{f !{g1A}1 !{g2V}2
545 % !{g3A}3 !{g4V}4 f},
546 % \feyn{fs f !{flA}{p}
547 % !{fluV}{k} f fs}
548 % \end{verbatim}
549 % \Becomes
550 % \begin{examplerhs}$
551 % \feyn{f !{g1A}1 !{g2V}2
552 % !{g3A}3 !{g4V}4 f},
553 % \feyn{fs f !{flA}{p}
554 % !{fluV}{k} f fs}
555 % $\end{examplerhs}
556 % \end{codeexample}
557 %
558 % \begin{codeexample}
559 % \begin{verbatim}
560 % \feyn{!{fA}p
561 % f!{glBV}k !{glSA}l
562 % a\vertexlabel_{p+k-l} ff}
563 % \end{verbatim}
564 % \Becomes
565 % \begin{examplerhs}$
566 % \feyn{!{fA}p
567 % f!{glBV}k !{glSA}l
568 % a\vertexlabel_{p+k-l} ff}
569 % $\end{examplerhs}
570 % \end{codeexample}
571 %
572 % \newenvironment{bigdisplay}[1]
573 % {\endgraf
574 % \penalty 50 \vskip 0.5\baselineskip plus 0.5\textheight
575 % \vbox\bgroup
576 % #1\endgraf \smallskip
577 % \vbox{\hrule\hbox to \textwidth{\vrule height 1.5ex\hfil\vrule}}%
578 % \parskip0pt}
579 % {\vbox{\hbox to \textwidth{\vrule height 1.5ex \hfil\vrule}\hrule}
580 % \egroup}
581 %
582 % \begin{bigdisplay}{Bremsstrahlung:}
583 % \begin{verbatim}
584 % \[
585 % \Diagram{ & x \\
586 % & ![ulft]{gvV}{q=p'+k-p} & !{guA}k \\
587 % ![bot]{fA}p & ![bot]{fA}{p'+k} & ![lrt]{fA}{p'} \\
588 % }
589 % +
590 % \Diagram{ & !{guA}k \\
591 % !{fA}p & ![bot]{fA}{p-k} fs & !{fA}{p'} \\
592 % & & ![lrt]{gvA}{q=p'+k-p} \\
593 % & & x\\
594 % }
595 % \]
596 % \end{verbatim}
597 % \hrule
598 % \[
599 % \Diagram{ & x \\
600 % & ![ulft]{gvV}{q=p'+k-p} & !{guA}k \\
601 % ![bot]{fA}p & ![bot]{fA}{p'+k} & ![lrt]{fA}{p'} \\
602 % }
603 % +
604 % \Diagram{ & !{guA}k \\
605 % !{fA}p & ![bot]{fA}{p-k} fs & !{fA}{p'} \\
606 % & & ![lrt]{gvA}{q=p'+k-p} \\
607 % & & x\\
608 % }
609 % \]
610 % \end{bigdisplay}
611 %
612 % \begin{bigdisplay}{And now the same, with
613 % \texttt{\textbackslash belowl} and \texttt{\textbackslash belowr}:}
614 % \begin{verbatim}
615 % \[
616 % \def\stack#1#2{\Diagram[bottom]{#1\\#2}}
617 % \feyn{
618 % !{fA}p
619 % \stack{x}{![ulft]{gvV}{q=p'+k-p}}
620 % ![bot]{fA}{p'+k}
621 % \stack{!{guA}k}{![lrt]{fA}{p'}}
622 % +
623 % !{fA}p
624 % \belowr{![llft]{gdA}k} !{fA}{p-k}
625 % fs
626 % \stack x{!{gvV}{q=p'+k-p}} !{fA}{p'}}
627 % \]
628 % \end{verbatim}
629 % \hrule
630 % \[
631 % \def\stack#1#2{\Diagram[bottom]{#1\\#2}}
632 % \feyn{
633 % !{fA}p
634 % \stack{x}{![ulft]{gvV}{q=p'+k-p}}
635 % ![bot]{fA}{p'+k}
636 % \stack{!{guA}k}{![lrt]{fA}{p'}}
637 % +
638 % !{fA}p
639 % \belowr{![llft]{gdA}k} !{fA}{p-k}
640 % fs
641 % \stack x{!{gvV}{q=p'+k-p}} !{fA}{p'}}
642 % \]
643 % \end{bigdisplay}
644 %
645 % The |\stack| macro isn't defined by the \feynx\ package, but
646 % it is useful enough that you might want to define it as one of your
647 % own macros.
648 %
649 % \iffalse
650 % We can also have diagrams in the text, like~$\Feyn{fsfglffs}$, and we can
651 % annotate the diagrams
652 % \begin{codeexample}
653 % \begin{verbatim}
654 % \annotate{2}{-0.5}
655 % {\mbox{counterterm}}
656 % \feyn{ms m gl ![llft]{gv}l
657 % ms x f}
658 % \end{verbatim}
659 % \Becomes
660 % \begin{examplerhs} $
661 % \annotate{2}{-0.5}
662 % {\mbox{counterterm}}
663 % \feyn{ms m gl ![llft]{gv}l
664 % ms x f}
665 % $\end{examplerhs}
666 % \end{codeexample}
667 % This is a ``short-massive massive gluon-loop gluon-vertical
668 % short-massive counterterm fermion''.
669 % \fi
670 %
671 % \begin{bigdisplay}{The expression for the heavy-fermion self-energy in the \textsc{ope} is:}
672 % \begin{verbatim}
673 % \def\bracket#1{\langle #1 \rangle}
674 % \def\stack#1#2{\Diagram[bottom]{#1\\#2}}
675 % \begin{eqnarray*}
676 % -i\Sigma_{\rm ope} &=&
677 % \left[ \feyn{faf + fsfglffs + \cdots} \right] 1
678 % \feynstrut{1}{1}\strut \\
679 % && \quad{}+ \left[ \feyn{ fxfs0glfs0xf + \cdots} \right]
680 % \bracket{\overline\psi M \psi} \\
681 % && \quad{}+ \left[
682 % \feyn{fs \stack x{gv} fs \stack x{gv} fs} + \cdots
683 % \right]
684 % \bracket{G_{\mu\nu}^a G_{\mu\nu}^a}\\
685 % \end{eqnarray*}
686 % \end{verbatim}
687 % \hrule
688 % \def\bracket#1{\langle #1 \rangle}
689 % \def\stack#1#2{\Diagram[bottom]{#1\\#2}}
690 % \begin{eqnarray*}
691 % -i\Sigma_{\rm ope} &=&
692 % \left[ \feyn{faf + fsfglffs + \cdots} \right] 1
693 % \feynstrut{1}{1}\strut \\
694 % && \quad{}+ \left[ \feyn{ fxfs0glfs0xf + \cdots} \right]
695 % \bracket{\overline\psi M \psi} \\
696 % && \quad{}+ \left[
697 % \feyn{fs \stack x{gv} fs \stack x{gv} fs} + \cdots
698 % \right]
699 % \bracket{G_{\mu\nu}^a G_{\mu\nu}^a}\\
700 % \end{eqnarray*}
701 % \end{bigdisplay}
702 %
703 % Now for two examples using |\FEYN|:
704 % \begin{codeexample}
705 % \begin{verbatim}
706 % \feyn{f gu \belowl{fd}}
707 % \end{verbatim}
708 % \Becomes
709 % \begin{examplerhs}$
710 % \feyn{f gu \belowl{fd}}
711 % $\end{examplerhs}
712 % \end{codeexample}
713 % \begin{codeexample}
714 % \begin{verbatim}
715 % \FEYN{
716 % !{fA}s !{gu}{W^-_\mu}
717 % \belowl{!{fdA}u}
718 % }
719 % \end{verbatim}
720 % \Becomes
721 % \begin{examplerhs}$
722 % \FEYN{
723 % !{fA}s !{gu}{W^-_\mu} \belowl{!{fdA}u}
724 % }
725 % $\end{examplerhs}
726 % \end{codeexample}
727 % \begin{codeexample}
728 % \begin{verbatim}
729 % \DIAGRAM{
730 % !{fA}s &!{gu}{W^-_\mu}\\
731 % & !{fdA}u
732 % }
733 % \end{verbatim}
734 % \Becomes
735 % \begin{examplerhs}$
736 % \DIAGRAM{!{fA}s &!{gu}{W^-_\mu}\\ & !{fdA}u}
737 % $\end{examplerhs}
738 % \end{codeexample}
739 %
740 % \begin{bigdisplay}{The Feynman Rules are as follows:}
741 % \begin{verbatim}
742 % \def\arraystretch{3} \arraycolsep=0.2cm
743 % \[ \begin{array}{rcl}
744 % \feyn{\vertexlabel^a !{fA}p \vertexlabel^b} % quark prop
745 % &=& \displaystyle
746 % {i\delta^{ab} \over \pslash- m_0} \\
747 %
748 % \Diagram{\vertexlabel^a \\ fd \\ & g\vertexlabel_{\mu,c} \\
749 % \vertexlabel_b fu\\} % 3-point vertex
750 % &=& \displaystyle
751 % ig\gamma_\mu (t^c)_{ab} \\
752 %
753 % \feyn{\vertexlabel_{\mu, a} !{gA}k \vertexlabel_{\nu, b}} % gluon prop
754 % &=& \displaystyle
755 % {-i\over k^2} \left[g_{\mu\nu} + (a_0 - 1) {k_\mu k_\nu \over k^2}\right]
756 % \delta^{ab} \\
757 %
758 % \Diagram{\vertexlabel^{\alpha,a} \\
759 % !{gdA}p \\
760 % & !{gA}r \vertexlabel_{\gamma,c} \\
761 % !{guA}q \\
762 % \vertexlabel_{\beta,b}
763 % } % 3-gluon vertex
764 % &=& \displaystyle
765 % -g f^{abc} (
766 % g_{\beta\gamma} (q-r)_\alpha +
767 % g_{\gamma\alpha} (r-p)_\beta +
768 % g_{\alpha\beta} (p-q)_\gamma
769 % ) \\
770 %
771 % \feyn{\vertexlabel^a !hp \vertexlabel^b} % ghost prop
772 % &=& \displaystyle
773 % {i \over p^2} \delta_{ab} \\
774 %
775 % \Diagram{\vertexlabel^b \\ hd \\ & g\vertexlabel^{\mu,a} \\
776 % \vertexlabel_c hu\\} % ghost-gluon vertex
777 % &=& \displaystyle
778 % -g f^{abc}p_\mu
779 % \quad\raise 1ex\hbox{\vtop{\hsize=15em
780 % where $p$ is the momentum of the outgoing positive energy
781 % ghost\par}}
782 % \end{array} \]
783 % \end{verbatim}
784 % \end{bigdisplay}
785 %
786 % \begin{bigdisplay}{\dots giving:}
787 % \def\arraystretch{3} \arraycolsep=0.2cm
788 % \[ \begin{array}{rcl}
789 % \feyn{\vertexlabel^a !{fA}p \vertexlabel^b}
790 % &=& \displaystyle
791 % {i\delta^{ab} \over \pslash- m_0} \\
792 %
793 % \Diagram{\vertexlabel^a \\ fd \\ & g\vertexlabel_{\mu,c} \\
794 % \vertexlabel_b fu\\}
795 % &=& \displaystyle
796 % ig\gamma_\mu (t^c)_{ab} \\
797 %
798 % \feyn{\vertexlabel_{\mu, a} !{gA}k \vertexlabel_{\nu, b}}
799 % &=& \displaystyle
800 % {-i\over k^2} \left[g_{\mu\nu} + (a_0 - 1) {k_\mu k_\nu \over k^2}\right]
801 % \delta^{ab} \\
802 %
803 % \Diagram{\vertexlabel^{\alpha,a} \\
804 % !{gdA}p \\
805 % & !{gA}r \vertexlabel_{\gamma,c} \\
806 % !{guA}q \\
807 % \vertexlabel_{\beta,b}
808 % }
809 % &=& \displaystyle
810 % -g f^{abc} (
811 % g_{\beta\gamma} (q-r)_\alpha +
812 % g_{\gamma\alpha} (r-p)_\beta +
813 % g_{\alpha\beta} (p-q)_\gamma
814 % ) \\
815 %
816 % \feyn{\vertexlabel^a !hp \vertexlabel^b}
817 % &=& \displaystyle
818 % {i \over p^2} \delta_{ab} \\
819 %
820 % \Diagram{\vertexlabel^b \\ hd \\ & g\vertexlabel^{\mu,a} \\
821 % \vertexlabel_c hu\\}
822 % &=& \displaystyle
823 % -g f^{abc}p_\mu
824 % \quad\raise 1ex\hbox{\vtop{\hsize=15em
825 % where $p$ is the momentum of the outgoing positive energy
826 % ghost\par}}
827 % \end{array} \]
828 % \end{bigdisplay}
829 %
830 % \begin{bigdisplay}{The diagrams can very naturally appear as parts of equations
831 % (as is perhaps by now obvious):}
832 % \begin{verbatim}
833 % \begin{eqnarray}
834 % \feyn{fcf} &=& \feyn{faf + fpf + fpfpf + \cdots} \\
835 % &=& \sum_{n=0}^\infty \feyn{fsafs ( pfsafs)}^n \\
836 % &=& \feyn{\frac{fsafs}{1-(pfsafs)}}.
837 % \end{eqnarray}
838 % \end{verbatim}
839 % \hrule
840 % \begin{eqnarray}
841 % \feyn{fcf} &=& \feyn{faf + fpf + fpfpf + \cdots} \\
842 % &=& \sum_{n=0}^\infty \feyn{fsafs ( pfsafs)}^n \\
843 % &=& \feyn{\frac{fsafs}{1-(pfsafs)}}.
844 % \end{eqnarray}
845 % \end{bigdisplay}
846 %
847 % \section{Installation}
848 %
849 % The nominal distribution point for the Feyn package is CTAN,
850 % under \texttt{fonts/feyn}\footnote{\url{https://ctan.org/pkg/feyn}}.
851 %
852 % The feyn package is included in the TeXLive distribution\footnote{\url{https://www.tug.org/texlive/}}, so
853 % you may have it on your machine already. If not, or if you need a
854 % more up-to-date version, read on.
855 %
856 % Since the package is on CTAN, it should be easily installed and
857 % updated using the tools which support this in your TeX distribution.
858 % For TeXLive, that's
859 % `tlmgr'\footnote{\url{https://www.tug.org/texlive/tlmgr.html}}, and
860 % for MikTeX see the maintenance section of the
861 % manual\footnote{\url{https://docs.miktex.org/}}.
862 %
863 % \subsection{Installing by hand}
864 %
865 % If, for some reason, you need to install the package by hand, then
866 % you should be able to find generic instructions for installing
867 % \LaTeX\ files at \url{https://texfaq.org/#installing}.
868 %
869 % In brief: If you have not done so already, you need to extract the package
870 % file from the distribution file using |latex feyn.ins|. The
871 % resulting \file{feyn.sty} should be installed in the usual location
872 % for style files -- that is, something like
873 % \file{texmf.local/tex/latex/feyn.sty}. The \metafont\ source files
874 % \file{*.mf} should be installed in a directory with a location such as
875 % \file{texmf.local/fonts/source/feyn/}. That should be all you need
876 % to do as regards the installation of the fonts -- if your \TeX\
877 % setup is installed correctly, then the usual font-generation
878 % commands (such as \file{mktexpk} for example) should work as normal,
879 % and these will usually be invoked by default when \LaTeX\ or
880 % pdf\LaTeX\ is run.
881 %
882 % If you are using a \TeX\ system based on TeXLive (which is true of most Unix
883 % installations, and most macOS installations), then you can
884 % determine the style-file and \metafont\ search paths using the commands
885 % \begin{verbatim}
886 % % kpsepath tex
887 % % kpsepath mf
888 % \end{verbatim}
889 % respectively. After you have installed them, you will probably need
890 % to give the command \texttt{mktexlsr} to rebuild the paths database,
891 % and you can confirm that the files are findable with the commands
892 % \texttt{kpsewhich feyn.sty} and \texttt{kpsewhich feyn10.mf}.
893 %
894 % \section{Licence}
895 %
896 % The following is the text of the BSD 2-clause licence.
897 %
898 % All rights reserved.
899 %
900 % Redistribution and use in source and binary forms, with or without
901 % modification, are permitted provided that the following conditions are
902 % met:
903 %
904 % 1. Redistributions of source code must retain the above copyright
905 % notice, this list of conditions and the following disclaimer.
906 %
907 % 2. Redistributions in binary form must reproduce the above copyright
908 % notice, this list of conditions and the following disclaimer in the
909 % documentation and/or other materials provided with the distribution.
910 %
911 % This software is provided by the copyright holders and contributors
912 % ``as is'' and any express or implied warranties, including, but not
913 % limited to, the implied warranties of merchantability and fitness for
914 % a particular purpose are disclaimed. in no event shall the copyright
915 % holder or contributors be liable for any direct, indirect, incidental,
916 % special, exemplary, or consequential damages (including, but not
917 % limited to, procurement of substitute goods or services; loss of use,
918 % data, or profits; or business interruption) however caused and on any
919 % theory of liability, whether in contract, strict liability, or tort
920 % (including negligence or otherwise) arising in any way out of the use
921 % of this software, even if advised of the possibility of such damage.
922 %
923 %
924 % \subsection*{Acknowledgements}
925 %
926 % Thanks to Purnendu Chakraborty, Fabio Correa, Bryan Chen, Hoang
927 % Nghia Nguyen and Luciano Pandola for
928 % suggestions and testing (and encouragement) at various times.
929 %
930 %
931 % \StopEventually{}
932 %
933 % \section{Implementation}
934 % \begin{macrocode}
935 %<*package>
936 % \end{macrocode}
937 %
938 % Start off with the available options.
939 %
940 % A wrinkle is that the |{align}| environment, which is defined
941 % in the amsmath package, reads its contents before processing them,
942 % which means that a `!' within the environment has its catcode fixed
943 % before it can be changed by |\feyn| or |\diagram|. To handle this
944 % situation, we support \Lopt{globalbang} and \Lopt{noglobalbang}
945 % options, which cause the `!' character to be redefined globally or
946 % not. The default depends on whether the amsmath package was loaded
947 % before this one was.
948 % \begin{macrocode}
949 \newif\ifFeyn@globalbang
950 \@ifpackageloaded{amsmath}{\Feyn@globalbangtrue}{\Feyn@globalbangfalse}
951 \DeclareOption{globalbang}{\Feyn@globalbangtrue}
952 \DeclareOption{noglobalbang}{\Feyn@globalbangfalse}
953 % \end{macrocode}
954 %
955 % Now process the options specified in the package command.
956 % \begin{macrocode}
957 \ProcessOptions
958 % \end{macrocode}
959 %
960 % Declare the feyn math font family. The |\skewchar| for this font
961 % (see the \TeX book, p431) can be set to zero, since it's a
962 % completely upright maths font (the least of its peculiarities). We
963 % don't have the font in much of a range of sizes.
964 % \begin{macrocode}
965 \DeclareFontFamily{OMS}{feyn}{\skewchar\font'000}
966 \DeclareFontShape{OMS}{feyn}{m}{n}{%
967 <-10.5>feyn10%
968 <10.5-11.5>feyn11%
969 <11.5-15>feyn12%
970 <15-21>feyn18%
971 <21->feyn24%
972 }{}
973 % \end{macrocode}
974 %
975 % Now do the same for the text-size fonts, declaring the textfeyn math
976 % font family.
977 % \begin{macrocode}
978 \DeclareFontFamily{OMS}{textfeyn}{\skewchar\font'000}
979 \DeclareFontShape{OMS}{textfeyn}{m}{n}{%
980 <-10.5>feyntext10%
981 <10.5-11.5>feyntext11%
982 <11.5-15>feyntext12%
983 <15-21>feyntext18%
984 <21->feyntext24%
985 }{}
986 % \end{macrocode}
987 %
988 % Finally, do the same for the extended-size fonts, declaring the
989 % feynx math font family.
990 % \begin{macrocode}
991 \DeclareFontFamily{OMS}{feynx}{\skewchar\font'000}
992 \DeclareFontShape{OMS}{feynx}{m}{n}{%
993 <-10.5>feynx10%
994 <10.5-11.5>feynx11%
995 <11.5-15>feynx12%
996 <15-21>feynx18%
997 <21->feynx24%
998 }{}
999 % \end{macrocode}
1000 %
1001 % XXX It would be nice to arrange things so that superscripts in
1002 % the feyn font were drawn from cmmi7, or something. The original
1003 % feyn.sty arranged this with |\scriptfont\diagramfam=\ninmi|, but
1004 % it's not clear what the analogue in the FSS is.
1005 %
1006 % Now declare the `feynman' symbol font, and make the command |\feyn|
1007 % set its argument in that font. Similarly have |\Feyn| invoke the
1008 % feynman symbol font for the text sizes.
1009 % \begin{macrocode}
1010 \DeclareSymbolFont{feynman}{OMS}{feyn}{m}{n}
1011 \DeclareSymbolFontAlphabet{\feyn@alphabet}{feynman}
1012 \DeclareSymbolFont{textfeynman}{OMS}{textfeyn}{m}{n}
1013 \DeclareSymbolFontAlphabet{\Feyn@alphabet}{textfeynman}
1014 \DeclareSymbolFont{feynmanextended}{OMS}{feynx}{m}{n}
1015 \DeclareSymbolFontAlphabet{\FEYN@alphabet}{feynmanextended}
1016 % \end{macrocode}
1017 %
1018 % Now use these font-setting commands, defining |\feyn| and |\Feyn| to
1019 % switch to the given alphabets, defining ! as a shortcut for
1020 % |\momentum| (so that |!{x}{y}| is interpreted as |\momentum{x}{y}|).
1021 % We have to make sure that the `!' character produces that character
1022 % everywhere except within |\feyn| or |\Feyn|. How we do this depends
1023 % on the value of the |\ifFeyn@globalbang| switch.
1024 % \begin{macro}{\feyn}
1025 % \begin{macrocode}
1026 \ifFeyn@globalbang
1027 \catcode`\!=\active
1028 \def!{\char`\!} % ! produces this character everywhere
1029 \def\feyn{\begingroup
1030 \let!\momentum % ...except within \feyn
1031 \feyn@}
1032 \def\Feyn{\begingroup
1033 \let!\momentum % ...or \Feyn
1034 \Feyn@}
1035 \def\FEYN{\begingroup
1036 \let!\momentum % ...or \FEYN
1037 \FEYN@}
1038 \else
1039 {\catcode`\!=\active % only make ! active within \feyn
1040 \gdef\feyn{%
1041 \begingroup % ends in \feyn@
1042 \catcode`\!=\active
1043 \let!=\momentum
1044 \feyn@}
1045 \gdef\Feyn{%
1046 \begingroup % ends in \Feyn@
1047 \catcode`\!=\active
1048 \let!=\momentum
1049 \Feyn@}
1050 \gdef\FEYN{%
1051 \begingroup % ends in \FEYN@
1052 \catcode`\!=\active
1053 \let!=\momentum
1054 \FEYN@}}
1055 \fi
1056 \def\feyn@#1{\let\feyn@mfmodule\feyn@mfbasemodule
1057 \feyn@alphabet{#1}\endgroup}
1058 \def\Feyn@#1{\let\feyn@mfmodule\feyn@mfbasemodule
1059 \Feyn@alphabet{#1}\endgroup}
1060 \def\FEYN@#1{\let\feyn@mfmodule\feyn@mfextendedmodule
1061 \FEYN@alphabet{#1}\endgroup}
1062 % \end{macrocode}
1063 % \end{macro}
1064 %
1065 %
1066 % Now get the size of the `module' (the length of the fermion), and the
1067 % height of the math-axis, from the font. You might think that the
1068 % math-axis is obtainable from |\fontdimen22| of the font, but we do
1069 % not load it as an |{operator}| font when we invoke
1070 % |\DeclareSymbolFont|, so it does not have all 22 parameters that a
1071 % symbol font (as the \TeX book uses the term, rather than \LaTeXe's
1072 % NFSS). I confess I don't \emph{really} understand the ins and outs
1073 % of this, but this route is robust and not wrong.
1074 %
1075 % The character |"20| in the feyn font is a dummy charcter, with width
1076 % |module#| and height |a#| (using the dimensions of the font
1077 % file). Use this to set the |\feyn@module| and |\feyn@maxis|. Note
1078 % that the `module' used in this package file is twice the module used
1079 % in the \metafont\ files themselves.
1080 % \begin{macro}{\feyn@module}
1081 % \begin{macro}{\feyn@maxis}
1082 % \begin{macrocode}
1083 \DeclareMathSymbol{\FeynSpaceChar}{\mathord}{feynman}{"20}
1084 \setbox0=\hbox{$\FeynSpaceChar$}
1085 \newdimen\feyn@mfbasemodule \feyn@mfbasemodule=\wd0
1086 \newdimen\feyn@module \feyn@module=2\wd0
1087 \newdimen\feyn@maxis \feyn@maxis=\ht0
1088 \DeclareMathSymbol{\FeynxSpaceChar}{\mathord}{feynmanextended}{"20}
1089 \setbox0=\hbox{$\FeynxSpaceChar$}
1090 \newdimen\feyn@mfextendedmodule \feyn@mfextendedmodule=\wd0
1091 % \end{macrocode}
1092 % \end{macro}
1093 % \end{macro}
1094 %
1095 % \begin{macro}{\Diagram}
1096 % Define the |\Diagram| macro, which lays out a semi-complicated
1097 % diagram in 2-d. The macro takes an optional argument which can be
1098 % either |[bottom]| or |[centre]|
1099 % \begin{macrocode}
1100 {\catcode`\!=\active
1101 \gdef\Diagram{%
1102 \begingroup % ends in \Diagram@
1103 \catcode`\!=\active
1104 \let!\momentum
1105 % \Diagram@
1106 \@ifnextchar[\Diagram@{\Diagram@[centre]}%]
1107 }}
1108 \let\Diagram@pos@centre\vcenter
1109 \let\Diagram@pos@center\vcenter %for Webster fans
1110 \let\Diagram@pos@bottom\relax
1111 \def\Diagram@[#1]#2{\setbox0=\hbox{\vbox{\offinterlineskip \let\\\cr
1112 \halign{&$\displaystyle\feyn{##}$\cr #2\crcr}}}%
1113 % \end{macrocode}
1114 % At this point, |\box0| has zero depth. It must be an hbox, because
1115 % we're fiddling with its height within a enclosing |\vbox|. See the
1116 % \TeX book pp 388--389. This takes advantage of appx G, rule 8 to
1117 % move box0 down by the height of the math axis. The construction
1118 % |\dp0 = -2\fontdimen22 \textfont2| also works, in the sense of
1119 % moving the box onto the math axis, but makes the box too small,
1120 % which means that surrounding text can encroach.
1121 % \begin{macrocode}
1122 \@tempdima=\ht0
1123 \advance\@tempdima by 2\feyn@maxis \ht0=\@tempdima
1124 % no error checking -- unrecognised placement specifiers just expand to \relax
1125 \csname Diagram@pos@#1\endcsname{\box0}%
1126 \endgroup}% end group begun in \Diagram
1127 % \end{macrocode}
1128 % \end{macro}
1129 %
1130 % Define |\DIAGRAM| identically, except for using |\FEYN| rather than |\feyn|.
1131 % \begin{macrocode}
1132 {\catcode`\!=\active
1133 \gdef\DIAGRAM{%
1134 \begingroup % ends in \Diagram@
1135 \catcode`\!=\active
1136 \let!\momentum
1137 % \DIAGRAM@
1138 \@ifnextchar[\DIAGRAM@{\DIAGRAM@[centre]}%]
1139 }}
1140 \def\DIAGRAM@[#1]#2{\setbox0=\hbox{\vbox{\offinterlineskip \let\\\cr
1141 \halign{&$\displaystyle\FEYN{##}$\cr #2\crcr}}}%
1142 \@tempdima=\ht0
1143 \advance\@tempdima by 2\feyn@maxis \ht0=\@tempdima
1144 \csname Diagram@pos@#1\endcsname{\box0}%
1145 \endgroup}% end group begun in \Diagram
1146 % \end{macrocode}
1147 %
1148 % \begin{macro}{\maxis}
1149 % Raise the argument to the math axis.
1150 % \begin{macrocode}
1151 \def\maxis#1{\raise\feyn@maxis \hbox{$#1$}}
1152 % \end{macrocode}
1153 % \end{macro}
1154 %
1155 % \iffalse
1156 % I feel that something like the following is surely somehow useful,
1157 % but the spacing doesn't quite work out with what I've got here.
1158 % \def\fstack#1{\vbox{\baselineskip=0pt \@fstack#1,,}}
1159 % \def\@fstack#1,{%
1160 % \def\@tempa{#1}%
1161 % \ifx\@tempa\@empty
1162 % \let\@next\relax
1163 % \else
1164 % \hbox{$\feyn{#1}$}%
1165 % \let\@next\@fstack
1166 % \fi
1167 % \@next
1168 % }
1169 % \[
1170 % \feyn{fsfg1\fstack{f0 gl,f0 glu,gv,ff}g2ffs \showlists}
1171 % \]
1172 % \fi
1173 %
1174 % \begin{macro}{\belowl}
1175 % The argument of the |\belowl| macro is a string of characters in the
1176 % \feynx\ font. They are set in a box, and then moved so that the box
1177 % takes up zero horizontal width, and is moved downwards by its height
1178 % -- that is, it is moved diagonally downwards and leftwards. It
1179 % means that the bottom half of a pair of incoming or outgoing
1180 % propagators can be set immediately belowl the upper half, without
1181 % having to use the |\Diagram| macro.
1182 % \begin{macrocode}
1183 \def\belowl#1{%
1184 \ifdim\feyn@mfmodule=\feyn@mfbasemodule
1185 \let\@next\feyn
1186 \else
1187 \let\@next\FEYN
1188 \fi
1189 \setbox0\hbox{$\@next{#1}$}%
1190 \hskip-\wd0 \lower\ht0\box0
1191 }
1192 % \end{macrocode}
1193 % \end{macro}
1194 % \begin{macro}{\belowr}
1195 % The |\belowr| macro is almost exactly the same, except that the
1196 % argument is shifted rightwards, which is sometimes more natural to
1197 % express.
1198 % \begin{macrocode}
1199 \def\belowr#1{%
1200 \ifdim\feyn@mfmodule=\feyn@mfbasemodule
1201 \let\@next\feyn
1202 \else
1203 \let\@next\FEYN
1204 \fi
1205 \setbox0\hbox{$\@next{#1}$}%
1206 \@tempdima=\wd0
1207 \lower\ht0\box0
1208 \hskip-\@tempdima
1209 }
1210 % \end{macrocode}
1211 % \end{macro}
1212 %
1213 % \begin{macro}{\momentum}
1214 % Manages annotation of characters. |\momentum{ch}{text}| sets the character
1215 % ch, which may be a ligature, and puts the given text at the recommended
1216 % annotation position for that character. |\momentum[pos]{ch}{text}|
1217 % is the same, except that the optional argument indicates the
1218 % position relative to the annotation position. It must be one of
1219 % `top', `urt', `lrt', `bot', `llft' or `ulft'.
1220 %
1221 % First, some support macros.
1222 %
1223 % |\feyn@nudge| is a small amount
1224 % which is added to the annotation positions, to keep them clear of the
1225 % point they're annotating.
1226 % \begin{macrocode}
1227 \newdimen\feyn@nudge
1228 \feyn@nudge=\feyn@mfbasemodule \divide\feyn@nudge by 3
1229 % \end{macrocode}
1230 %
1231 % The various |\feyn@pos@<x>| macros position their third argument
1232 % adjacent to a point offset by an amount |(#1,#2)| from the current
1233 % position. The macro |\feyn@pos@top| has the third argument adjacent
1234 % and above the point, |\feyn@pos@urt| has it to the upper-right, and
1235 % so on.
1236 % \begin{macrocode}
1237 \def\feyn@pos@top#1#2#3{% top
1238 \leavevmode
1239 \@tempdima=#2\feyn@mfmodule \advance\@tempdima\feyn@nudge
1240 \setbox1=\hbox{\raise \@tempdima\hbox to 0pt{%
1241 \hskip #1\feyn@mfmodule
1242 \hbox to 0pt{\hss$\scriptstyle #3$\hss}\hss}}%
1243 \ht1=0pt \dp1=0pt \box1}
1244 \def\feyn@pos@urt#1#2#3{% urt
1245 \leavevmode
1246 \@tempdima=#2\feyn@mfmodule \advance\@tempdima\feyn@nudge
1247 \setbox1=\hbox{\raise \@tempdima\hbox to 0pt{%
1248 \hskip #1\feyn@mfmodule \hskip\feyn@nudge $\scriptstyle #3$\hss}}%
1249 \ht1=0pt \dp1=0pt \box1}
1250 \def\feyn@pos@lrt#1#2#3{% lrt
1251 \leavevmode
1252 \setbox0=\hbox to 0pt{\hskip\feyn@nudge $\scriptstyle #3$\hss}%
1253 \@tempdima=#2\feyn@mfmodule
1254 \advance\@tempdima -\ht0
1255 \advance\@tempdima-\feyn@nudge
1256 \setbox1=\hbox{\raise \@tempdima\hbox to 0pt{%
1257 \hskip #1\feyn@mfmodule \box0\hss}}%
1258 \ht1=0pt \dp1=0pt \box1}
1259 \def\feyn@pos@bot#1#2#3{% bot
1260 \leavevmode
1261 \setbox0=\hbox to 0pt{\hss$\scriptstyle #3$\hss}%
1262 \@tempdima=#2\feyn@mfmodule
1263 \advance\@tempdima -\ht0
1264 \advance\@tempdima-\feyn@nudge
1265 \setbox1=\hbox{\raise \@tempdima\hbox to 0pt{%
1266 \hskip #1\feyn@mfmodule \box0\hss}}%
1267 \ht1=0pt \dp1=0pt \box1}
1268 \def\feyn@pos@llft#1#2#3{% llft
1269 \leavevmode
1270 \setbox0=\hbox to 0pt{\hss$\scriptstyle #3$\hskip\feyn@nudge}%
1271 \@tempdima=#2\feyn@mfmodule
1272 \advance\@tempdima -\ht0
1273 \advance\@tempdima-\feyn@nudge
1274 \setbox1=\hbox{\raise \@tempdima\hbox to 0pt{%
1275 \hskip #1\feyn@mfmodule \box0\hss}}%
1276 \ht1=0pt \dp1=0pt \box1}
1277 \def\feyn@pos@ulft#1#2#3{% ulft
1278 \leavevmode
1279 \@tempdima=#2\feyn@mfmodule \advance\@tempdima\feyn@nudge
1280 \setbox1=\hbox{\raise \@tempdima\hbox to 0pt{%
1281 \hskip #1\feyn@mfmodule
1282 \hbox to 0pt{\hss$\scriptstyle #3$\hskip\feyn@nudge}\hss}}%
1283 \ht1=0pt \dp1=0pt \box1}
1284 % \end{macrocode}
1285 %
1286 % Now include the definitions of the annotation positions, as extracted
1287 % from the Metafont file. These define macros |\feyn@ann@#1|,
1288 % where argument |#1| is a given character (or ligature) at the
1289 % position |(#2,#3)|, using the various |\feyn@pos@<x>| macros. The
1290 % |<x>| is either the value of argument |#4|, or the contents of
1291 % |\@tempa| if that has been set non-empty by |\momentum@|.
1292 % \begin{macrocode}
1293 \def\feyn@annotation#1#2#3#4{%
1294 \expandafter\def\csname feyn@ann@#1\endcsname##1{%
1295 \csname feyn@pos@\ifx\@tempa\@empty #4\else\@tempa\fi\endcsname
1296 {#2}{#3}{##1}%
1297 #1}}
1298 % \end{macrocode}
1299 % Now read in the collection of annotation positions. These are
1300 % generated by the \texttt{./parse-ligtables} script, and inserted
1301 % into this file by the Makefile when \file{feyn.dtx} is generated.
1302 % \begin{macrocode}
1303 % @FEYNANNOTATIONS@
1304 % commands generated by parse-ligtables...
1305 \feyn@annotation{f}{0.99974}{0.35}{top}% 102 = "f"
1306 \feyn@annotation{fA}{0.99974}{0.35}{top}% 70 = "F"
1307 \feyn@annotation{fV}{0.99974}{0.35}{top}% 6 = 6
1308 \feyn@annotation{flo}{0}{2.25}{top}% 107 = "k"
1309 \feyn@annotation{floA}{0}{2.25}{top}% 75 = "K"
1310 \feyn@annotation{floV}{0}{2.25}{top}% 11 = 11
1311 \feyn@annotation{fu}{0.70692}{0.95692}{ulft}% 101 = "e"
1312 \feyn@annotation{fuA}{0.70692}{0.95692}{ulft}% 69 = "E"
1313 \feyn@annotation{fuV}{0.70692}{0.95692}{ulft}% 5 = 5
1314 \feyn@annotation{fd}{0.70692}{0.95692}{urt}% 100 = "d"
1315 \feyn@annotation{fdA}{0.70692}{0.95692}{urt}% 68 = "D"
1316 \feyn@annotation{fdV}{0.70692}{0.95692}{urt}% 4 = 4
1317 \feyn@annotation{fv}{0}{1.24974}{urt}% 98 = "b"
1318 \feyn@annotation{fvA}{0}{1.24974}{urt}% 66 = "B"
1319 \feyn@annotation{fvV}{0}{1.24974}{urt}% 2 = 2
1320 \feyn@annotation{m}{0.99974}{0.32802}{top}% 109 = "m"
1321 \feyn@annotation{mA}{0.99974}{0.32802}{top}% 77 = "M"
1322 \feyn@annotation{mV}{0.99974}{0.32802}{top}% 13 = 13
1323 \feyn@annotation{ms}{0.49986}{0.32802}{top}% 35 = "#"
1324 \feyn@annotation{fl}{0}{1.75}{top}% 108 = "l"
1325 \feyn@annotation{flA}{0}{1.75}{top}% 76 = "L"
1326 \feyn@annotation{flV}{0}{1.75}{top}% 12 = 12
1327 \feyn@annotation{flu}{0}{-1.25}{bot}% 110 = "n"
1328 \feyn@annotation{fluA}{0}{-1.25}{bot}% 78 = "N"
1329 \feyn@annotation{fluV}{0}{-1.25}{bot}% 14 = 14
1330 \feyn@annotation{flS}{0}{1.16667}{top}% 111 = "o"
1331 \feyn@annotation{flSA}{0}{1.16667}{top}% 79 = "O"
1332 \feyn@annotation{flSV}{0}{1.16667}{top}% 15 = 15
1333 \feyn@annotation{flSu}{0}{-0.83334}{bot}% 119 = "w"
1334 \feyn@annotation{flSuA}{0}{-0.83334}{bot}% 87 = "W"
1335 \feyn@annotation{flSuV}{0}{-0.83334}{bot}% 23 = 23
1336 \feyn@annotation{g}{0.99974}{0.45}{top}% 103 = "g"
1337 \feyn@annotation{gA}{0.99974}{0.45}{top}% 71 = "G"
1338 \feyn@annotation{gV}{0.99974}{0.45}{top}% 7 = 7
1339 \feyn@annotation{gu}{0.70692}{0.95692}{ulft}% 117 = "u"
1340 \feyn@annotation{guA}{0.70692}{0.95692}{ulft}% 85 = "U"
1341 \feyn@annotation{guV}{0.70692}{0.95692}{ulft}% 21 = 21
1342 \feyn@annotation{gd}{0.70692}{0.95692}{urt}% 118 = "v"
1343 \feyn@annotation{gdA}{0.70692}{0.95692}{urt}% 86 = "V"
1344 \feyn@annotation{gdV}{0.70692}{0.95692}{urt}% 22 = 22
1345 \feyn@annotation{gv}{0}{1.24974}{urt}% 125 = "}"
1346 \feyn@annotation{gvA}{0}{1.24974}{urt}% 93 = "]"
1347 \feyn@annotation{gvV}{0}{1.24974}{urt}% 29 = 29
1348 \feyn@annotation{g1}{-1}{1.98206}{ulft}% 113 = "q"
1349 \feyn@annotation{g1A}{-1}{1.98206}{ulft}% 81 = "Q"
1350 \feyn@annotation{g1V}{-1}{1.98206}{ulft}% 17 = 17
1351 \feyn@annotation{g2}{1.41422}{1.66422}{urt}% 114 = "r"
1352 \feyn@annotation{g2A}{1.41422}{1.66422}{urt}% 82 = "R"
1353 \feyn@annotation{g2V}{1.41422}{1.66422}{urt}% 18 = 18
1354 \feyn@annotation{g3}{1.41422}{-1.16422}{lrt}% 115 = "s"
1355 \feyn@annotation{g3A}{1.41422}{-1.16422}{lrt}% 83 = "S"
1356 \feyn@annotation{g3V}{1.41422}{-1.16422}{lrt}% 19 = 19
1357 \feyn@annotation{g4}{-1}{-1.48206}{llft}% 116 = "t"
1358 \feyn@annotation{g4A}{-1}{-1.48206}{llft}% 84 = "T"
1359 \feyn@annotation{g4V}{-1}{-1.48206}{llft}% 20 = 20
1360 \feyn@annotation{gl}{0}{1.75}{urt}% 121 = "y"
1361 \feyn@annotation{glA}{0}{1.75}{urt}% 89 = "Y"
1362 \feyn@annotation{glV}{0}{1.75}{urt}% 25 = 25
1363 \feyn@annotation{glu}{0}{-1.25}{llft}% 122 = "z"
1364 \feyn@annotation{gluA}{0}{-1.25}{llft}% 90 = "Z"
1365 \feyn@annotation{gluV}{0}{-1.25}{llft}% 26 = 26
1366 \feyn@annotation{glB}{1.02051}{2.71367}{urt}% 123 = "{"
1367 \feyn@annotation{glBA}{1.02051}{2.71367}{urt}% 91 = "["
1368 \feyn@annotation{glBV}{1.02051}{2.71367}{urt}% 27 = 27
1369 \feyn@annotation{glS}{0}{1.5833}{llft}% 124 = "|"
1370 \feyn@annotation{glSA}{0}{1.5833}{llft}% 92 = "\"
1371 \feyn@annotation{glSV}{0}{1.5833}{llft}% 28 = 28
1372 \feyn@annotation{h}{0.99974}{0.25}{top}% 104 = "h"
1373 \feyn@annotation{hA}{0.99974}{0.25}{top}% 72 = "H"
1374 \feyn@annotation{hV}{0.99974}{0.25}{top}% 8 = 8
1375 \feyn@annotation{hu}{0.70464}{0.95464}{ulft}% 105 = "i"
1376 \feyn@annotation{huA}{0.70464}{0.95464}{ulft}% 73 = "I"
1377 \feyn@annotation{huV}{0.70464}{0.95464}{ulft}% 9 = 9
1378 \feyn@annotation{hd}{0.70464}{0.95464}{urt}% 106 = "j"
1379 \feyn@annotation{hdA}{0.70464}{0.95464}{urt}% 74 = "J"
1380 \feyn@annotation{hdV}{0.70464}{0.95464}{urt}% 10 = 10
1381 \feyn@annotation{hl}{0}{1.75}{top}% 126 = "~"
1382 \feyn@annotation{hlA}{0}{1.75}{top}% 94 = "^"
1383 \feyn@annotation{hlV}{0}{1.75}{top}% 30 = 30
1384 \feyn@annotation{hlu}{0}{-1.25}{top}% 127 = 127
1385 \feyn@annotation{hluA}{0}{-1.25}{top}% 95 = "_"
1386 \feyn@annotation{hluV}{0}{-1.25}{top}% 31 = 31
1387 \feyn@annotation{hs}{0.49986}{0.25}{top}% 34 = """
1388 \feyn@annotation{c}{0.65044}{0.90044}{top}% 99 = "c"
1389 \feyn@annotation{p}{0.65}{0.9}{top}% 112 = "p"
1390 \feyn@annotation{P}{0.65044}{0.90044}{top}% 80 = "P"
1391 \feyn@annotation{x}{0}{0.55641}{top}% 120 = "x"
1392 % \end{macrocode}
1393 %
1394 %
1395 % The |\momentum| macro (finally) invokes its worker macro
1396 % |\momentum@|, defaulting that macro's optional argument to empty.
1397 % In fact the macro |\momentum| should be only rarely
1398 % invoked, since ! is made active and bound to it within |\feyn|.
1399 %
1400 % The |\momentum@| macro takes two arguments, and expands to a call to
1401 % macro |\feyn@ann@#1|, acting on the second argument. This macro is
1402 % one of those defined by |\feyn@annotation| above. There is an
1403 % optional argument, giving the position for the annotation, if it has
1404 % turned out that the default position for this character is
1405 % inappropriate. The adjusted position may be one of `top', `urt',
1406 % `lrt', `bot', `llft' or `ulft'.
1407 % \begin{macrocode}
1408 \def\momentum{\@ifnextchar[\momentum@{\momentum@[]}}
1409 \def\momentum@[#1]#2#3{%
1410 \def\@tempa{#1}
1411 \ifx\@tempa\@empty \else
1412 \@ifundefined{feyn@pos@#1}
1413 {\@latex@error{No annotation position #1}%
1414 {You cannot call \string\momentum[#1]{...}^^J(must be one
1415 of top, urt, lrt, bot, llft, ulft)}%
1416 #2}%
1417 \fi
1418 \@ifundefined{feyn@ann@#2}%
1419 {\@latex@error{No annotation defined for #2}%
1420 {You cannot call \string\momentum{#2}{...}}%
1421 #2}%
1422 {\csname feyn@ann@#2\endcsname{#3}}}
1423 % \end{macrocode}
1424 % \end{macro}
1425 %
1426 % \begin{macro}{\vertexlabel}
1427 % The command |\vertexlabel^{text}| or |\vertexlabel_{text}| positions
1428 % the |{text}| in maths mode either above or below, respectively, the
1429 % current position. It's used between characters to label a vertex.
1430 % \begin{macrocode}
1431 \def\vertexlabel#1#2{\setbox0=\hbox to 0pt{\hss$\scriptstyle #2$\hss}
1432 \ifcat #1^
1433 \vbox to 0pt{\vss\box0\nointerlineskip\kern2\feyn@maxis}
1434 \else\ifcat #1_
1435 \vbox to 0pt{\kern\feyn@maxis\nointerlineskip\box0\vss}
1436 \else
1437 \PackageError{feyn}
1438 {Bad arguments for \string\vertexlabel}
1439 {Usage: \string\vertexlabel^{text} or \string\vertexlabel_{text}}
1440 \fi\fi
1441 }
1442 % \end{macrocode}
1443 % \end{macro}
1444 %
1445 % \begin{macro}{\annotate}
1446 % The |\annotate| command takes $x$ and $y$ coordinates in units of
1447 % modules, and text (in math mode) to be placed on a |\diagram|.
1448 % Deprecated, now that the characters have annotation built in to them.
1449 % \begin{macrocode}
1450 \def\annotate#1#2#3{\vcenter to 0pt{\vss
1451 \hbox to 0pt{\hskip #1\feyn@module\hbox to 0pt{\hss$\scriptstyle #3$\hss}\hss
1452 }\vskip #2\feyn@module}}
1453 % \end{macrocode}
1454 % \end{macro}
1455 % \begin{macro}{\tannotate}
1456 % The |\tannotate| command is just the same, but the annotating text
1457 % is in horizontal mode.
1458 % \begin{macrocode}
1459 \def\tannotate#1#2#3{\vcenter to 0pt{\vss
1460 \hbox to 0pt{\hskip #1\feyn@module\hbox to 0pt{\hss #3\hss}\hss
1461 }\vskip #2\feyn@module}}
1462 % \end{macrocode}
1463 % \end{macro}
1464 %
1465 % \begin{macro}{\feynstrut}
1466 % The macro |\feynstrut#1#2| defines |\strut| to have a height
1467 % |#1| modules, and depth |#2| modules.
1468 % \begin{macrocode}
1469 \def\feynstrut#1#2{\setbox\strutbox=\hbox{\vrule
1470 height #1\feyn@module depth #2\feyn@module width 0pt}}
1471 % \end{macrocode}
1472 % \end{macro}
1473 %
1474 % \begin{macro}{\arrow}
1475 % The command |\arrow#1#2#3| puts an arrow of gradient |#3|${}\times 45^\circ$
1476 % at position |(#1,#2)|(modules). This doesn't work -- the |\char|
1477 % results in a |\rm| character appearing, rather than a |\feyn|
1478 % character. Putting in a symbol like `+' has the same effect, but
1479 % putting in, say, `a' works as expected. In other words, it's to do
1480 % with the character's mathcode, and the |\char|
1481 % should be replaced by a |\mathchar"7?\@tempcnta| somehow. The
1482 % problem is that that depends on the parameter |\fam| having a
1483 % suitable value. It's not clear to me what this corresponds to in
1484 % \LaTeXe. See the \TeX book, chapter 17.
1485 % \begin{macrocode}
1486 \def\arrow#1#2#3{\@latex@error{Do not use the \string\arrow macro any more}{}}
1487 % \end{macrocode}
1488 % \end{macro}
1489 %
1490 % Declare symbols. All of these are ligatures.
1491 % \begin{macrocode}
1492 \DeclareMathSymbol{\wfermion}{0}{feynman}{"64}
1493 %\DeclareMathSymbol{\Wfermion}{0}{feynman}{"44}
1494 \DeclareMathSymbol{\hfermion}{0}{feynman}{"6B}
1495 %\DeclareMathSymbol{\Hfermion}{0}{feynman}{"4B}
1496 \DeclareMathSymbol{\shfermion}{0}{feynman}{"6C}
1497 %\DeclareMathSymbol{\sHfermion}{0}{feynman}{"4C}
1498 \DeclareMathSymbol{\whfermion}{0}{feynman}{"6D}
1499 %\DeclareMathSymbol{\wHfermion}{0}{feynman}{"4D}
1500 \DeclareMathSymbol{\gvcropped}{0}{feynman}{"07}
1501 % \end{macrocode}
1502 % But the following are not ligatures.
1503 % \begin{macrocode}
1504 \DeclareMathSymbol{\bigbosonloop}{0}{feynman}{"7B}
1505 %\DeclareMathSymbol{\Bigbosonloop}{7}{feynman}{"21}
1506 \DeclareMathSymbol{\smallbosonloop}{0}{feynman}{"7C}
1507 \DeclareMathSymbol{\bigbosonloopA}{0}{feynman}{"5B}
1508 \DeclareMathSymbol{\smallbosonloopA}{0}{feynman}{"5C}
1509 \DeclareMathSymbol{\bigbosonloopV}{0}{feynman}{"1B}
1510 \DeclareMathSymbol{\smallbosonloopV}{0}{feynman}{"1C}
1511 % \end{macrocode}
1512 %
1513 %
1514 % \Finale
1515 \endinput