Debian Codegraph @

texmf-dist/source/fonts/dozenal/dozenal.dtx

raw
1 % \iffalse
2 % +AMDG This document was begun on 14 November 2008, the
3 % feast of St. Josaphat, and it is humbly dedicated to him
4 % and to the Immaculate Heart of Mary for their prayers, and
5 % to the Sacred Heart of Jesus for His mercy.
6 %
7 % This document is copyright 2008-2018 by Donald P. Goodman, and is
8 % released publicly under the LaTeX Project Public License. The
9 % distribution and modification of this work is constrained by the
10 % conditions of that license. See
11 % http://www.latex-project.org/lppl.txt
12 % for the text of the license. This document is released
13 % under version 1.3 of that license, and this work may be distributed
14 % or modified under the terms of that license or, at your option, any
15 % later version.
16 %
17 % This work has the LPPL maintenance status 'maintained'.
18 %
19 % The Current Maintainer of this work is Donald P. Goodman
20 % ([email protected]).
21 %
22 % This work consists of the files listed in dozenalfilelist.txt.
23 % \fi
24
25 % \iffalse
26 %<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
27 %<package>\ProvidesPackage{dozenal}[2018/05/11 v7.2 support for dozenal fonts]
28 %<*driver>
29
30 \documentclass{ltxdoc}
31 \usepackage{doc}
32 \usepackage{verbatim}
33 \usepackage{url}
34 \usepackage[typeone]{dozenal}
35 \usepackage{mflogo}
36 \usepackage{makeidx}
37 \makeindex
38 \long\def\demonstrate#1#2{%
39 \bigskip%
40 \hrule%
41 \hbox to\linewidth{%
42 \hbox to0.5\linewidth{%
43 \vbox to2in{\vfil#1\vfil}%
44 }\hbox to0.5\linewidth{%
45 \vbox to2in{\vfil#2\vfil}%
46 }%
47 }%
48 \hrule%
49 \bigskip%
50 }
51
52 \begin{document}
53 \DocInput{dozenal.dtx}
54 \end{document}
55 %</driver>
56 % \fi
57 % \title{The \texttt{dozenal} Package, v7.2}
58 % \author{Donald P.\ Goodman III}
59 % \date{\today}
60 %
61 % \maketitle
62 % \begin{abstract}\noindent
63 % The |dozenal| package provides some simple mechanisms for
64 % working with the dozenal (duodecimal or ``base 12'')
65 % numerical system. It redefines all basic \LaTeX\
66 % counters, provides a command for converting arbitrary
67 % decimal numbers into dozenal, and provides new, real
68 % \MF\ characters for ten and eleven, though the
69 % commands for producing them can be redefined to produce
70 % any figure. As of v2.0, it also includes Type 1 versions
71 % of the fonts, selected (as of v5.0) with the |typeone|
72 % package option. This package uses the |\basexii|
73 % algorithm by David Kastrup.
74 % \end{abstract}
75 %
76 % \tableofcontents
77 %
78 % \section{Introduction}
79 % \label{sect:intro}
80 %
81 % While most would probably call it at best overoptimistic and
82 % at worst foolish, some people (the author included) do still
83 % find themselves attracted to the dozenal (base-twelve)
84 % system. These people, however, have been pretty hard
85 % up\footnote{This is an Americanism for ``out of luck'' or
86 % ``in difficult circumstances,'' for those who do not
87 % know.} in the \LaTeX\ world. There is no package file
88 % available which produces dozenal counters, like page and
89 % chapter numbers, nor were there \emph{any} (I made a
90 % pretty diligent search) dozenal characters for ten and
91 % eleven, leaving dozenalists forced to use such makeshift
92 % ugliness as the ``X/E'' or ``T/E'' or ``*/\#'' or whatever
93 % other standard they decided to use. While this sort of
94 % thing may be acceptable in ASCII, it's absolutely
95 % unacceptable in a beautiful, typeset document.
96 %
97 % Enter the |dozenal| package. This package automates all
98 % the messiness of being a dozenalist and using \LaTeX. It
99 % redefines all the counters (though you'll have to redefine
100 % them yourself if you're using your own), provides an
101 % algorithm (generously donated by the intrepid David
102 % Kastrup) for converting arbitrary positive whole numbers
103 % into dozenal (this is e\TeX, but all modern distributions
104 % will compile that), and finally, it includes original
105 % dozenal characters, specifically designed to blend in well
106 % with Knuth's Computer Modern fonts, though they should do
107 % fine with a few other common body fonts, as well.
108 %
109 % This document was typeset in accordance with the \LaTeX\
110 % \textsc{docstrip} utility, which allows automatic
111 % extraction of source code and documentation from the same
112 % source.
113 %
114 % \section{Basic Functionality}
115 % \label{sect:func}
116 %
117 % The |dozenal| package performs several basic tasks, which
118 % are the core of its functionality. A brief listing of
119 % them will help the user understand the options available,
120 % which are explained later on in this document.
121 %
122 % \begin{itemize}
123 % \item Provides commands for converting decimal numbers to
124 % dozenal and back again. (The ``back again,'' conversion
125 % of dozenal back to decimal, only works in limited
126 % circumstances.)
127 % \item Provides default characters for the two transdecimal
128 % digits, ``\x'' for ten and ``\e'' for eleven; these
129 % correspond to the accepted Unicode standard digits
130 % ``turned digit two'' and ``turned digit three,'' which (as
131 % of June 11\e\e) are now part of the Unicode standard.
132 % These characters copy-paste as ``X'' and
133 % ``E,'' the (somewhat) standard ASCII representations of
134 % these two digits. However, other characters can easily be
135 % substituted if desired.
136 % \item Redefines the counters in standard \LaTeX\ document
137 % classes (such as |article|, |book|, and so forth) to use
138 % dozenal rather than decimal. This behavior can be shut
139 % off if desired.
140 % \item Provides macros for converting dozenal numbers to
141 % words; e.g., ``3\e'' to ``three dozen eleven.''
142 % \item Provides macros for converting numbers to ``doman''
143 % numerals; that is, a dozenal version of Roman numerals.
144 % \end{itemize}
145 %
146 % That covered, we can now move on to how these features are
147 % exploited by the user.
148 %
149 % \subsection{Base Conversion}
150 % \label{sub:numconv}
151 %
152 % The |dozenal| package provides several new commands for
153 % base conversion. The first, and by far the most important
154 % given the purpose and content of this package, is
155 % |\basexii|\DescribeMacro{\basexii}. This is a very simple
156 % command which takes the following structure:
157 % \begin{quote}
158 % \cs{basexii}\marg{number}\marg{ten symbol}\marg{eleven symbol}
159 % \end{quote}
160 % What the above means is that the command is |\basexii| and
161 % it takes three mandatory arguments: first, the number to
162 % be converted into dozenal; second, the symbol that should
163 % be used for ten; and third, the symbol that should be used
164 % for eleven. This number should be positive and whole;
165 % that is, it should be zero or higher, and it should not
166 % contain a fractional part. \TeX\ is a typesetting
167 % program, after all; if you want a robust decimal to
168 % dozenal converter, there are many options that any
169 % dozenalists caring enough to use this package will already
170 % know about.
171 %
172 % This |\basexii| algorithm was produced by David Kastrup,
173 % well known and admired in the \TeX\ world for his many
174 % useful packages and other contributions. He posted this
175 % algorithm on comp.text.tex; it is included here with his
176 % kind and generous permission.
177 %
178 % \label{page:dozens}
179 % That one would want to use the same ten and eleven symbols
180 % throughout a document seems a reasonable assumption;
181 % therefore, I have provided a simplified version of the
182 % |\basexii| command, |\dozens|\DescribeMacro{\dozens}.
183 % |\dozens| takes only a single argument, the number to be
184 % converted; the ten and eleven symbols used are those
185 % produced by the commands |\x| and |\e|, to which we'll get
186 % in a moment.
187 %
188 % Finally, as of v5.0, we can convert numbers back to
189 % decimal from dozenal, if we wish. We do this with the
190 % \DescribeMacro{\basex}|\basex| macro, which takes a single
191 % argument, which is the dozenal number you wish to convert
192 % to decimal. This is subject to a pretty harsh
193 % restriction, however: the only tokens allowed in
194 % the number are 0--9, |X|, and |E|; putting in anything
195 % else will cause violent choking with ``expected a
196 % number''-type errors.
197 %
198 % To illustrate these limitations, let's define a new
199 % counter and dozenize it. Here, we define the counter and
200 % give it a nice value which will ensure that its dozenal
201 % value will have an |\e| in it:
202 %
203 % \newcounter{testcount}\setcounter{testcount}{47}
204 % \begin{quotation}
205 % |\newcounter{testcount}\setcounter{testcount}{47}|
206 % \end{quotation}
207 %
208 % In dozenal, of course, ``47'' is ``3\e.'' Now, let's
209 % redefine that counter so that its results will be dozenal:
210 %
211 % \renewcommand\thetestcount{\basexii{\value{testcount}}{\x}{\e}}
212 % \begin{quotation}
213 % |\renewcommand\thetestcount{\basexii{\value{testcount}}{\x}{\e}}|
214 % \end{quotation}
215 %
216 % Now |dozenal| allow us to do lovely things like the following:
217 %
218 % \begin{quotation}
219 % |\thetestcount| = \thetestcount
220 % \end{quotation}
221 %
222 % It's tempting to try to put that number into |\basex| to
223 % get it in decimal; but don't try it;
224 % |\basex{\thetestcount}| doesn't work because it contains
225 % expanded versions of |\x| and |\e|. Fortunately, you
226 % don't need it; \LaTeX\ already has the value of the
227 % |testcount| counter in its innards, and is quite used to
228 % outputting it in decimal:
229 %
230 % \begin{quotation}
231 % |\arabic{testcount}| = \arabic{testcount}
232 % \end{quotation}
233 %
234 % On the other hand, if you have an actual string you want
235 % converted, you can send it directly to |\basex|:
236 %
237 % \begin{quotation}
238 % |\basex{3E}| = \basex{3E}
239 % \end{quotation}
240 %
241 % So |\basex| is of limited utility, but it's a nice tool to
242 % add to the box.
243 %
244 % \subsection{Numbers to Words}
245 % \label{sub:numtowords}
246 %
247 % |dozenal| allows you to easily convert counters into
248 % \emph{words}, by supplying said counter's name to the
249 % \DescribeMacro{\doznumtoword}|\doznumtoword| macro. It
250 % takes as its argument the name of a \emph{counter} (not a
251 % number itself!) and converts this into words:
252 %
253 % \newcounter{somecount}\setcounter{somecount}{851}
254 % \begin{quote}
255 % |This page's number is ``\doznumtoword{page}.''| \\
256 % This page's number is ``\doznumtoword{page}.''
257 % \end{quote}
258 %
259 % This macro works with much larger numbers, as well.
260 % Purely for exemplary purposes, let's define a counter
261 % |somecount| with |\newcounter{somecount}|, and set it
262 % equal to (decimal) 851 with |\setcounter{somecount}{851}|.
263 % ``851''
264 % in dozenal is ``5\x\e.'' Therefore,
265 % |\doznumtoword{somecount}| will yield
266 % ``\doznumtoword{somecount}.'' If you want to change the
267 % capitalization, use other macros; e.g.,
268 % \DescribeMacro{\DOZnumtoword}|\DOZnumtoword{somecount}| gives
269 % ``\DOZnumtoword{somecount},'' while
270 % \DescribeMacro{\Doznumtoword}|\Doznumtoword{somecount}| gives
271 % ``\Doznumtoword{somecount}.''
272 %
273 % |\doznumtoword| (and friends) do act correctly when there
274 % are zeroes in the middle of the number, e.g., when
275 % |somecount| is equal to decimal 6977, which is dozenal
276 % 4055, it will output
277 % \setcounter{somecount}{6977}``\doznumtoword{somecount}.''
278 % When there's a zero at the \emph{end} of the number, that
279 % zero is still output: |\doznumtoword{somecount}| where
280 % |somecount|\setcounter{somecount}{144} is equal to 144 gives
281 % ``\doznumtoword{somecount},'' not simply ``one biqua.'' I
282 % haven't decided yet if this is a bug or a feature; when I
283 % do, I'll act accordingly.
284 %
285 % The rank words (``unqua,'' ``biqua,'' and so forth) are
286 % all customizable by user-level commands, which are named
287 % |\dozrankoneword| for ``unqua,'' |\dozranktwoword| for
288 % ``biqua,'' and so forth. Simply redefine them like so:
289 %
290 % \begin{quote}
291 % |\def\dozrankoneword{dozen}|\def\dozrankoneword{dozen} \\
292 % |\setcounter{somecount}{51}|\setcounter{somecount}{51} \\
293 % |\doznumtoword{somecount}| = \doznumtoword{somecount}
294 % \end{quote}
295 % \def\dozrankoneword{unqua}
296 %
297 % This type of macro is useful for putting page numbers in
298 % both digits and words, for example.
299 %
300 % \subsection{Doman Numerals}
301 % \label{sub:domannums}
302 %
303 % Dozenalists have also come up with some ideas for how to
304 % use Roman numerals in a decimal way; therefore, the
305 % |dozenal| package provides some macros to assist with
306 % that, as well.
307 %
308 % To form ``Doman'' numerals, we simply alter the values of
309 % the traditional Roman characters into more
310 % dozenal-friendly alternatives. So ``v'' is 6, ``x'' is
311 % 10, and so on. Then, to avoid stringing four of the same
312 % character together, we extend the subtractive principle to
313 % allow up to \emph{two} lower characters prior to a
314 % higher-value character. So, e.g., ``iiv'' is $6 - 2$, or
315 % 4, while ``iv'' is $6 - 1$, or 5.
316 %
317 % The macros |\Doman|\DescribeMacro{\Doman}\ and
318 % |\doman|\DescribeMacro{\doman}\ are equivalent to |\Roman|
319 % and |\roman|, giving either capitalized or lowercase
320 % dozenal Roman numerals.
321 %
322 % \newcounter{testdoman}\setcounter{testdoman}{1}
323 % \renewcommand\thetestdoman{\doman{\value{testdoman}}}
324 %
325 % \begin{center}
326 % \begin{tabular}{cccccccccccccc}
327 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
328 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
329 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
330 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
331 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
332 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
333 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
334 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
335 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
336 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
337 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
338 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
339 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
340 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
341 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
342 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
343 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
344 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
345 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
346 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
347 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
348 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
349 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
350 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
351 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
352 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
353 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
354 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
355 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
356 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
357 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
358 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
359 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
360 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
361 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
362 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
363 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
364 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
365 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
366 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
367 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
368 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
369 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
370 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
371 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
372 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
373 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
374 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
375 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
376 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
377 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
378 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
379 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
380 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
381 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
382 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
383 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
384 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
385 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
386 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
387 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
388 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
389 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
390 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
391 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
392 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
393 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
394 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
395 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
396 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
397 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} &
398 % \dozens{\value{testdoman}} & \thetestdoman\stepcounter{testdoman} \\
399 % \end{tabular}
400 % \end{center}
401 %
402 % In the table above, the Doman numerals 1--60 are
403 % displayed, along with their Hindu-Arabic equivalents. This
404 % table was produced entirely using a new \LaTeX\ counter,
405 % |testdoman|; |\thetestdoman| was defined by saying
406 %
407 % \begin{quote}
408 % |\renewcommand\thetestdoman{\doman{\value{testdoman}}}|
409 % \end{quote}
410 %
411 % The Hindu-Arabic columns were displayed with
412 % |\dozens{\value{testdoman}}|. Every two table cells,
413 % |testdoman| is increased by one. The whole table was
414 % produced without manually entering a single number in
415 % either form.
416 %
417 % Most commonly, Roman numerals are seen in part numbers and
418 % in the page numbering of frontmatter.
419 % To achieve that result, do:
420 %
421 % \begin{quote}
422 % |\renewcommand\thepage{\doman{\arabic{page}}}|
423 % \end{quote}
424 %
425 % You can reset this to normal dozenal numerals (or whatever
426 % else you'd prefer) when you reach your mainmatter.
427 %
428 % \section{Dozenal Characters and Fonts}
429 % \label{sect:fonts}
430 %
431 % \subsection{Shorthands for Dozenal Characters}
432 % \label{sub:shorthands}
433 %
434 % To make use of the |\dozens| shorthand discussed
435 % earlier,\footnote{See supra, Section \ref{sub:numconv},
436 % at page \pageref{page:dozens}.} you need to have the
437 % commands |\x| and |\e| defined. Fortunately, this package
438 % does that for you.
439 %
440 % |\x|\DescribeMacro{\x}\ and |\e|\DescribeMacro{\e}\ are
441 % the commands used to quickly and easily access the symbols
442 % for ten and eleven. They default to using the special
443 % dozenal characters that are part of this package; they
444 % could be easily redefined if for some reason you don't
445 % like the Pitman characters (which are soon to be included
446 % in Unicode) in the following manner:
447 % \begin{quote}
448 % |\renewcommand\x{X}|
449 % \end{quote}
450 % Or whichever characters you like to use. If you prefer
451 % the Dozenal Society of America's proposed characters (a
452 % stylized X and E), then this package will disappoint you.
453 % May I suggest |$\chi$| ($\chi$) and |$\xi$| ($\xi$) as a
454 % stopgap while you locate or produce real characters of
455 % your own? Sorry; I'm an American myself, but I much
456 % prefer the Pitman characters for a variety of reasons
457 % (feel free to email me if you care), and creating fonts in
458 % \MF, even small and inconsequential ones like this, is too
459 % much work for characters that I don't even like.
460 %
461 % \subsection{The \texttt{dozenal} Fonts}
462 % \label{sub:dozfonts}
463 %
464 % The fonts provided by the dozenal package are essentially
465 % complete fonts which contain only the Pitman dozenal
466 % characters; these are \x\ for ten and \e\ for eleven.
467 % These characters are designed to blend well with the
468 % Computer Modern fonts; they work passably well with
469 % Times-type fonts and with kpfonts, and possibly with
470 % others.
471 %
472 % The characters also come in all the appropriate shapes and
473 % sizes; a few examples follow.
474 %
475 % \begin{center}
476 % \begin{tabular}{lccc}
477 % {} & Roman & \textit{Italic} & \textbf{Boldface} \\
478 % \footnotesize Footnotesize & \footnotesize\x\ \e & \footnotesize\itshape
479 % \x\ \e & \footnotesize\bfseries \x \e \\
480 % \normalsize Normalsize & \normalsize\x\ \e & \normalsize\itshape
481 % \x\ \e & \normalsize\bfseries \x \e \\
482 % \LARGE LARGE & \LARGE\x\ \e & \LARGE\itshape
483 % \x\ \e & \LARGE\bfseries \x \e \\
484 % \Huge Huge & \Huge\x\ \e & \Huge\itshape
485 % \x\ \e & \Huge\bfseries \x \e \\
486 % \end{tabular}
487 % \end{center}
488 %
489 % They will work in paragraph or math mode without
490 % distinction.
491 %
492 % \subsection{Tally Marks}
493 % \label{sub:tallymarks}
494 %
495 % As of v4.0, |dozenal| also includes fonts for tally marks
496 % specifically designed for use in the dozenal base. In many
497 % European countries tallies are kept in a very similar way;
498 % this font demonstrates a way that such tally marks can be
499 % made consistent as well as dozenal.
500 %
501 % \begin{center}
502 % \begin{tabular}{cccccc}
503 % 1 & 2 & 3 & 4 & 5 & 6 \\
504 % \Huge\tally{1} & \Huge\tally{2} & \Huge\tally{3} & \Huge\tally{4} & \Huge\tally{5} & \Huge\tally{6} \\
505 % \end{tabular}
506 % \end{center}
507 %
508 % These are accessed by the \DescribeMacro{\tally}|\tally|
509 % command, which takes one argument: the number, 1--6,
510 % which you want to put in tallies. Entering ``X'' or ``E''
511 % will yield ``\x'' or ``\e'' respectively. Other
512 % characters will produce nothing.
513 %
514 % As of v6.0, there are separate, hand-written versions of
515 % the tally marks, accessed by putting tallies in italic:
516 %
517 % \begin{center}\itshape
518 % \begin{tabular}{cccccc}
519 % 1 & 2 & 3 & 4 & 5 & 6 \\
520 % \Huge\tally{1} & \Huge\tally{2} & \Huge\tally{3} & \Huge\tally{4} & \Huge\tally{5} & \Huge\tally{6} \\
521 % \end{tabular}
522 % \end{center}
523 %
524 % In other words, to get these shapes, say
525 % |\textit{\tally{6}}|; this will give you
526 % ``\textit{\tally{6}}.''
527 %
528 % The fonts are all prefixed |dozch|, if for some reason
529 % direct access to them is needed.
530 %
531 % \subsection{Dozenal Radix Point}
532 % \label{sub:dozradixpoint}
533 %
534 % Lastly, |dozenal| allows the use of the common dozenal
535 % radix point, ``;'', to work properly in math mode. Some
536 % dozenalists prefer to use ``;'' rather than ``.'' (or
537 % ``,'') to mark the transition from integers to fractions
538 % in numbers; e.g., three-and-a-half is ``3;6.'' In math
539 % mode, however, this doesn't work; a semicolon in math
540 % mode is punctuation, and a spurious space is inserted
541 % (quite correctly) afterward. We don't want this space
542 % when we're using it as a radix point. So |dozenal| (using
543 % code adapted from Walter Schmidt's |icomma| package) fixes
544 % this:
545 %
546 % |$3;6$| = 3;6
547 %
548 % And all is right with the world.
549 %
550 % \section{Package Options}
551 % \label{sect:packopts}
552 %
553 % The |dozenal| package redefines all the standard
554 % \LaTeX\ counters, such as |section| and |enumii|. If
555 % you've defined your own counters, you'll need to dozenize
556 % them yourself; however, this is an easy matter:
557 % \begin{quote}
558 % |\renewcommand\thecounter{\basexii{\arabic{counter}}{\x}{\e}}|
559 % \end{quote}
560 % For example. Of course, you can fill in the |\x| and |\e|
561 % with whatever you want (though it would make more sense to
562 % simply redefine |\x| and |\e|, so that all the counters
563 % would use the same characters), or you could use the
564 % |\dozens| command instead. Whatever your pleasure might
565 % be.
566 %
567 % If you \emph{don't} want all the counters to be redefined,
568 % or if you're using a class which doesn't include basic
569 % \LaTeX\ counters, you'll want to use the |nocounters|
570 % option. The |nocounters|\DescribeMacro{nocounters}\
571 % option to the package prevents the redefinition of these
572 % counters. The effect of this is that the commands of the
573 % package (|\basexii|, |\dozens|, etc.) are made available,
574 % but all the counters will still be in decimal. This
575 % permits using dozenal characters in an otherwise decimal
576 % document; it also proves useful in document classes in
577 % which these counters are undefined (e.g., |minimal|).
578 %
579 % The |dozenal| fonts were designed in \MF, and they are
580 % distributed in both \MF-generated bitmaps and autotraced
581 % Postscript Type1 fonts. The
582 % |typeone|\DescribeMacro{typeone}\ option forces |dozenal|
583 % to provide Postscript Type 1 fonts rather than \MF\
584 % bitmaps to \TeX. Both of these are produced from the same
585 % font files, though, so the difference is very slight.
586 % However, the Type1 fonts do generally look better on
587 % screen; the |typeone| option will probably be used most of
588 % the time that |dozenal| itself is used.
589 %
590 % \section{Implementation}
591 % \label{sect:code}
592 %
593 % Make sure that we have |fixltx2e| loaded, so that the
594 % |\TextOrMath| magic will work. Also, as of v6.0, we also
595 % require |xstring| to use |\IfStrEq| in the number-to-word
596 % code.
597 % \begin{macrocode}
598 \RequirePackage{fixltx2e}
599 \RequirePackage{xstring}
600 % \end{macrocode}
601 % Now we ensure that |ifpdf| is loaded, so that we can test
602 % for pdf or dvi modes. We also make sure we have
603 % |ifluatex|, so that |dozenal| won't choke when you use it
604 % with the |typeone| option. We'll take care of the
605 % |luatex| stuff right away, while we're at it:
606 % \begin{macrocode}
607 \RequirePackage{ifpdf}
608 \RequirePackage{ifluatex}
609 \ifluatex
610 \protected\def\pdfmapfile {\pdfextension mapfile }
611 \fi
612 % \end{macrocode}
613 % We also require |mfirstuc|, because it's \emph{great}:
614 % \begin{macrocode}
615 \RequirePackage{mfirstuc}
616 % \end{macrocode}
617 % Now we declare the option ``nocounters'', which prevents
618 % |dozenal| from redefining all the counters. This prevents
619 % errors in document classes which don't have these counters,
620 % such as |minimal|. Defines the command |\nocounters| if
621 % and only if the options is named.
622 % \begin{macrocode}
623 \DeclareOption{nocounters}{%
624 \def\nocounters{}%
625 }%
626 % \end{macrocode}
627 % Now we define the |typeone| option, which forces the use
628 % of the Type 1 versions of the dozenal fonts.
629 % \begin{macrocode}
630 \newif\iftypeone\typeonefalse
631 \DeclareOption{typeone}{\typeonetrue}
632 \ProcessOptions\relax
633 % \end{macrocode}
634 % We then define the font that we're using for our
635 % \MF-produced Pitman characters. Incidentally, we also
636 % define the command |\doz|, though I can't foresee any
637 % decent use for it except in packages and preambles; it is
638 % then used to define |\x| and |\e|, which provide the ten
639 % and eleven symbols for all the counter redefinitions.
640 % This includes definitions for both T1 and OT1 encodings,
641 % so it will work with either.
642 % \begin{macrocode}
643 \iftypeone%
644 \ifpdf
645 \pdfmapfile{=dozenal.map}
646 \fi
647 \DeclareFontFamily{T1}{dozch}{}
648 \DeclareFontShape{T1}{dozch}{m}{n}{<-6> dozchars6
649 <7> dozchars7 <8> dozchars8 <9> dozchars9 <10-11>
650 dozchars10 <12-16> dozchars12 <17-> dozchars17 }{}
651 \DeclareFontShape{T1}{dozch}{b}{n}{<-> dozchb10 }{}
652 \DeclareFontShape{T1}{dozch}{bx}{n}{<-6> dozchbx6
653 <7> dozchbx7 <8> dozchbx8 <9> dozchbx9 <10-11>
654 dozchbx10 <12-> dozchbx12 }{}
655 \DeclareFontShape{T1}{dozch}{m}{sl}{<-8> dozchsl8
656 <9> dozchsl9 <10-11> dozchsl10 <12-> dozchsl12 }{}
657 \DeclareFontShape{T1}{dozch}{bx}{sl}{<-> dozchbxsl10 }{}
658 \DeclareFontShape{T1}{dozch}{m}{it}{<-7> dozchit7
659 <8> dozchit8 <9> dozchit9 <10-11> dozchit10
660 <12-> dozchit12 }{}
661 \DeclareFontShape{T1}{dozch}{bx}{it}{<-> dozchbxi10 }{}
662 \def\doz#1{{\fontfamily{dozch}\fontencoding{T1}\selectfont #1}}%
663 \DeclareSymbolFont{dozens}{T1}{dozch}{m}{n}
664 \else%
665 \DeclareFontFamily{OT1}{dozch}{}
666 \DeclareFontShape{OT1}{dozch}{m}{n}{<-6> dozchars6
667 <7> dozchars7 <8> dozchars8 <9> dozchars9 <10-11>
668 dozchars10 <12-16> dozchars12 <17-> dozchars17 }{}
669 \DeclareFontShape{OT1}{dozch}{b}{n}{<-> dozchb10 }{}
670 \DeclareFontShape{OT1}{dozch}{bx}{n}{<-6> dozchbx6
671 <7> dozchbx7 <8> dozchbx8 <9> dozchbx9 <10-11>
672 dozchbx10 <12-> dozchbx12 }{}
673 \DeclareFontShape{OT1}{dozch}{m}{sl}{<-8> dozchsl8
674 <9> dozchsl9 <10-11> dozchsl10 <12-> dozchsl12 }{}
675 \DeclareFontShape{OT1}{dozch}{bx}{sl}{<-> dozchbxsl10 }{}
676 \DeclareFontShape{OT1}{dozch}{m}{it}{<-7> dozchit7
677 <8> dozchit8 <9> dozchit9 <10-11> dozchit10
678 <12-> dozchit12 }{}
679 \DeclareFontShape{OT1}{dozch}{bx}{it}{<-> dozchbxi10 }{}
680 \def\doz#1{{\fontfamily{dozch}\fontencoding{OT1}\selectfont #1}}%
681 \DeclareSymbolFont{dozens}{OT1}{dozch}{m}{n}
682 \fi%
683 \newcommand\x{\unexpanded{\TextOrMath{\protect\doz{{X}}}{\doz@X}}}%
684 \newcommand\e{\unexpanded{\TextOrMath{\protect\doz{{E}}}{\doz@E}}}%
685 \DeclareMathSymbol{\doz@X}{\mathord}{dozens}{88}%
686 \DeclareMathSymbol{\doz@E}{\mathord}{dozens}{69}%
687 % \end{macrocode}
688 % Put in some additional code for the tally marks.
689 % \begin{macrocode}
690 \newcommand\tally[1]{%
691 % \usefont{OT1}{dozch}{m}{n}\selectfont{#1}%
692 \doz{#1}%
693 }%
694 % \end{macrocode}
695 % Then we define our command which will produce the dozenal
696 % numbers from decimal sources. This algorithm was taken
697 % directly from the publicly available archives of
698 % comp.text.tex, where it was posted by the well-known and
699 % redoubtable David Kastrup. We also define the |\dozens|
700 % command, a simplified |\basexii| (which, in fact, depends
701 % utterly upon |\basexii|), just to make it easy for
702 % everyone.
703 % \begin{macrocode}
704 \def\basexii#1#2#3{\ifcase\numexpr(#1)\relax
705 0\or1\or2\or3\or4\or5\or6\or7\or8\or9\or#2\or#3\else
706 \expandafter\basexii\expandafter{\number\numexpr((#1)-6)/12}{#2}{#3}\expandafter\basexii\expandafter{\number\numexpr(#1)-((#1)-6)/12*12}{#2}{#3}\fi}
707 \newcommand\dozens[1]{\basexii{#1}{\x}{\e}}
708 % \end{macrocode}
709 % Now that we can convert numbers \emph{to} dozenal, let's
710 % set it up so that we can convert them \emph{from} dozenal.
711 % I use |xstring| here, replacing a messy macro mesh from
712 % the last version (5.3).
713 % \begin{macrocode}
714 \newcount\doz@countchar
715 \def\doz@charcount#1{%
716 \StrLen{#1}[\doz@filler]%
717 \doz@countchar=\doz@filler%
718 }%
719 % \end{macrocode}
720 % Now we develop our conversion routines for |\basex|. For
721 % v6.0, these were hugely simplified by using the |xstring|
722 % package instead of trying to bash through in plain
723 % \TeX, which eventually worked but was \emph{not} pretty.
724 % We start by defining a few counters to help us out:
725 % \begin{macrocode}
726 \newcount\doz@lfiller\doz@lfiller=-1%
727 \newcount\doz@total\doz@total=0%
728 \newcount\doz@loopi\doz@loopi=0%
729 \newcount\doz@multiplier\doz@multiplier=1%
730 % \end{macrocode}
731 % Next we adopt a macro from TeX.SE question 140476, from
732 % user "Dan", which works like a charm even when using
733 % counter values rather than simple integers. These macros
734 % let us grab an individual character from a string; in this
735 % case, from the argument of |\basex|.
736 % \begin{macrocode}
737 % macro from TeX.SE question 140476, posted by user "Dan"
738 \def\ninthofmany#1#2#3#4#5#6#7#8#9{#9\gobbletorelax}
739 \def\gobbletorelax#1\relax{}
740 \def\doz@CharAt#1#2{%
741 \expandafter\ninthofmany\romannumeral\numexpr(9000-\number#1000)#2\relax}
742 % end "Dan" macro
743 % \end{macrocode}
744 % Here's where the money happens. We loop through each
745 % digit of the argument, multiplying it by the appropriate
746 % factor of 10 (the dozen, of course), and then add that to
747 % a rolling total. At the end, we output the number.
748 % \begin{macrocode}
749 \def\doz@ten{X}%
750 \def\doz@elv{E}%
751 \def\doz@basex#1{%
752 \doz@total=0%
753 \doz@loopi=\doz@countchar%
754 \doz@multiplier=1%
755 \def\doz@wholenum{#1}%
756 \loop\ifnum\doz@loopi>0%
757 \def\doz@currchar{\doz@CharAt{\number\doz@loopi}{\doz@wholenum}}%
758 \if\doz@currchar\doz@ten%
759 \doz@lfiller=10%
760 \else\if\doz@currchar\doz@elv%
761 \doz@lfiller=11%
762 \else%
763 \doz@lfiller=\doz@currchar%
764 \fi\fi%
765 \multiply\doz@lfiller by\doz@multiplier%
766 \multiply\doz@multiplier by12%
767 \advance\doz@total by\doz@lfiller%
768 \advance\doz@loopi by-1%
769 \repeat%
770 \the\doz@total%
771 }%
772 \def\basex#1{%
773 \doz@charcount{#1}%
774 \doz@loopi=0%
775 \doz@basex{#1}%
776 \doz@multiplier=1%
777 \doz@total=0%
778 }%
779 % \end{macrocode}
780 % Finally, we define the macros for creating ``Doman''
781 % (dozenal Roman) numerals. One, of course, is defined in
782 % terms of the other. First, though, we need a modulus
783 % operator:
784 % \begin{macrocode}
785 \newcount\doz@modulus%
786 \def\doz@modulo#1#2{%
787 \doz@modulus=#1%
788 \divide\doz@modulus by#2%
789 \multiply\doz@modulus by#2%
790 \multiply\doz@modulus by-1%
791 \advance\doz@modulus by#1\relax%
792 }%
793 \newcount\doz@quotient%
794 \def\doz@quot#1#2{%
795 \doz@quotient=#1%
796 \divide\doz@quotient by#2%
797 }%
798 % \end{macrocode}
799 % Now we can move on to the meat of the operation:
800 % \begin{macrocode}
801 \newcount\doz@romct%
802 \newif\ifdoz@domancaps%
803 \def\doz@doman#1{%
804 \doz@romct=#1%
805 \doz@quot{\doz@romct}{1728}%
806 \loop\ifnum\doz@quotient>0%
807 \ifdoz@domancaps M\else m\fi%
808 \advance\doz@quotient by-1%
809 \advance\doz@romct by-1728%
810 \repeat
811 \ifnum\doz@romct>1440
812 \ifnum\doz@romct<1584
813 \ifdoz@domancaps CCM\else ccm\fi%
814 \advance\doz@romct by-1440
815 \else%\ifnum\doz@romct>1583
816 \ifdoz@domancaps CM\else cm\fi%
817 \advance\doz@romct by-1584
818 \fi
819 \fi
820 \ifnum\doz@romct>575%
821 \ifnum\doz@romct<719
822 \ifdoz@domancaps CCD\else ccd\fi%
823 \advance\doz@romct by-576
824 \else
825 \ifnum\doz@romct<864%
826 \ifdoz@domancaps CD\else cd\fi%
827 \advance\doz@romct by-720%
828 \fi
829 \fi
830 \else
831 \ifnum\doz@romct>719
832 \ifdoz@domancaps D\else d\fi%
833 \advance\doz@romct by-719%
834 \fi
835 \fi
836 \doz@quot{\doz@romct}{144}%
837 \loop\ifnum\doz@quotient>0%
838 \ifdoz@domancaps C\else c\fi%
839 \advance\doz@quotient by-1%
840 \advance\doz@romct by-144%
841 \repeat
842 \ifnum\doz@romct>119
843 \ifnum\doz@romct<132
844 \ifdoz@domancaps XXC\else xxc\fi%
845 \advance\doz@romct by-120
846 \else
847 \ifdoz@domancaps XC\else xc\fi%
848 \advance\doz@romct by-132
849 \fi
850 \fi
851 \ifnum\doz@romct>71
852 \ifdoz@domancaps L\else l\fi%
853 \advance\doz@romct by-72
854 \fi
855 \ifnum\doz@romct>47%
856 \ifnum\doz@romct>59%
857 \ifdoz@domancaps XL\else xl\fi%
858 \advance\doz@romct by-60%
859 \else
860 \ifdoz@domancaps XXL\else xxl\fi%
861 \advance\doz@romct by-48%
862 \fi
863 \fi
864 \doz@quot{\doz@romct}{12}%
865 \loop\ifnum\doz@quotient>0%
866 \ifdoz@domancaps X\else x\fi%
867 \advance\doz@quotient by-1%
868 \advance\doz@romct by-12%
869 \repeat
870 \doz@modulo{\doz@romct}{12}%
871 \ifnum\doz@modulus=10
872 \ifdoz@domancaps IIX\else iix\fi%
873 \advance\doz@romct by-10
874 \fi
875 \ifnum\doz@modulus=11
876 \ifdoz@domancaps IX\else ix\fi%
877 \advance\doz@romct by-11
878 \fi
879 \ifnum\doz@romct>5
880 \ifdoz@domancaps V\else v\fi%
881 \advance\doz@romct by-6
882 \fi
883 \ifnum\doz@romct>3%
884 \ifnum\doz@romct=4%
885 \ifdoz@domancaps IIV\else iiv\fi%
886 \advance\doz@romct by-4%
887 \else
888 \ifnum\doz@romct=5%
889 \ifdoz@domancaps IV\else iv\fi%
890 \advance\doz@romct by-5%
891 \fi
892 \ifnum\doz@romct=6%
893 \ifdoz@domancaps V\else v\fi%
894 \advance\doz@romct by-6
895 \fi
896 \fi
897 \fi
898 \doz@quot{\doz@romct}{1}%
899 \loop\ifnum\doz@quotient>0%
900 \ifdoz@domancaps I\else i\fi%
901 \advance\doz@quotient by-1%
902 \advance\doz@romct by-1%
903 \repeat
904 }
905 \protected\def\doman#1{%
906 \doz@domancapsfalse%
907 \doz@doman{#1}%
908 }%
909 \protected\def\Doman#1{%
910 \doz@domancapstrue%
911 \doz@doman{#1}%
912 }%
913 % \end{macrocode}
914 % Now, of course, we simply redefine all the counters. This
915 % covers only those counters included in the basic \LaTeX\
916 % document classes, however, so if you've written your own,
917 % you'll need to redefine them yourself.
918 %
919 % This first bit ensures that the counters are redefined
920 % even if the command |\mainmatter| is not defined. We have
921 % to do this outside of the |\g@addto@macro| below;
922 % otherwise, in documents where |\mainmatter| is defined but
923 % not used, the counters will not be redefined. This way,
924 % they're redefined in all cases.
925 %
926 % This also takes care of ensuring that the counters are
927 % only redefined if the ``nocounters'' options was
928 % \emph{not} specified.
929 % \begin{macrocode}
930 \@ifundefined{nocounters}{%
931 \@ifundefined{c@page}{}{%
932 \renewcommand\thepage{\basexii{\value{page}}{\x}{\e}}}
933 \@ifundefined{c@footnote}{}{%
934 \renewcommand\thefootnote{%
935 \basexii{\value{footnote}}{\x}{\e}}}
936 \@ifundefined{c@part}{}{%
937 \renewcommand\thepart{%
938 \basexii{\value{part}}{\x}{\e}}}
939 \@ifundefined{c@subparagraph}{}{%
940 \renewcommand\thesubparagraph{%
941 \basexii{\value{subparagraph}}{\x}{\e}}}
942 \@ifundefined{c@paragraph}{}{%
943 \renewcommand\theparagraph{%
944 \basexii{\value{paragraph}}{\x}{\e}}}
945 \@ifundefined{c@equation}{}{%
946 \renewcommand\theequation{%
947 \basexii{\value{equation}}{\x}{\e}}}
948 \@ifundefined{c@figure}{}{%
949 \renewcommand\thefigure{%
950 \basexii{\value{figure}}{\x}{\e}}}
951 \@ifundefined{c@table}{}{%
952 \renewcommand\thetable{%
953 \basexii{\value{table}}{\x}{\e}}}
954 \@ifundefined{c@table}{}{%
955 \renewcommand\thempfootnote{%
956 \basexii{\value{mpfootnote}}{\x}{\e}}}
957 \@ifundefined{c@enumi}{}{%
958 \renewcommand\theenumi{%
959 \basexii{\value{enumi}}{\x}{\e}}}
960 \@ifundefined{c@enumii}{}{%
961 \renewcommand\theenumii{%
962 \basexii{\value{enumii}}{\x}{\e}}}
963 \@ifundefined{c@enumiii}{}{%
964 \renewcommand\theenumiii{%
965 \basexii{\value{enumiii}}{\x}{\e}}}
966 \@ifundefined{c@enumiv}{}{%
967 \renewcommand\theenumiv{%
968 \basexii{\value{enumiv}}{\x}{\e}}}
969 \@ifundefined{c@chapter}{%
970 \renewcommand\thesection{%
971 \basexii{\value{section}}{\x}{\e}}
972 \renewcommand\thesubsection{%
973 \thesection.\basexii{\value{subsection}}{\x}{\e}}
974 \renewcommand\thesubsubsection{%
975 \thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
976 }{
977 \renewcommand\thechapter{%
978 \basexii{\value{chapter}}{\x}{\e}}
979 \renewcommand\thesection{%
980 \thechapter.\basexii{\value{section}}{\x}{\e}}
981 \renewcommand\thesubsection{%
982 \thesection.\basexii{\value{subsection}}{\x}{\e}}
983 \renewcommand\thesubsubsection{%
984 \thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
985 }
986 % \end{macrocode}
987 % Finally, if the |\mainmatter| command is used, we need to
988 % make sure that it doesn't mess up our numbering scheme.
989 % \begin{macrocode}
990 \@ifundefined{mainmatter}{}{%
991 \g@addto@macro\mainmatter{%
992 \@ifundefined{c@page}{}{%
993 \renewcommand\thepage{\basexii{\value{page}}{\x}{\e}}}
994 \@ifundefined{c@footnote}{}{%
995 \renewcommand\thefootnote{\basexii{\value{footnote}}{\x}{\e}}}
996 \@ifundefined{c@part}{}{%
997 \renewcommand\thepart{\basexii{\value{part}}{\x}{\e}}}
998 \@ifundefined{c@subparagraph}{}{%
999 \renewcommand\thesubparagraph{%
1000 \basexii{\value{subparagraph}}{\x}{\e}}}
1001 \@ifundefined{c@paragraph}{}{%
1002 \renewcommand\theparagraph{%
1003 \basexii{\value{paragraph}}{\x}{\e}}}
1004 \@ifundefined{c@equation}{}{%
1005 \renewcommand\theequation{%
1006 \basexii{\value{equation}}{\x}{\e}}}
1007 \@ifundefined{c@figure}{}{%
1008 \renewcommand\thefigure{%
1009 \basexii{\value{figure}}{\x}{\e}}}
1010 \@ifundefined{c@table}{}{%
1011 \renewcommand\thetable{%
1012 \basexii{\value{table}}{\x}{\e}}}
1013 \@ifundefined{c@table}{}{%
1014 \renewcommand\thempfootnote{%
1015 \basexii{\value{mpfootnote}}{\x}{\e}}}
1016 \@ifundefined{c@enumi}{}{%
1017 \renewcommand\theenumi{%
1018 \basexii{\value{enumi}}{\x}{\e}}}
1019 \@ifundefined{c@enumii}{}{%
1020 \renewcommand\theenumii{%
1021 \basexii{\value{enumii}}{\x}{\e}}}
1022 \@ifundefined{c@enumiii}{}{%
1023 \renewcommand\theenumiii{%
1024 \basexii{\value{enumiii}}{\x}{\e}}}
1025 \@ifundefined{c@enumiv}{}{%
1026 \renewcommand\theenumiv{%
1027 \basexii{\value{enumiv}}{\x}{\e}}}
1028 \@ifundefined{c@chapter}{
1029 \renewcommand\thesection{%
1030 \basexii{\value{section}}{\x}{\e}}
1031 \renewcommand\thesubsection{%
1032 \thesection.\basexii{\value{subsection}}{\x}{\e}}
1033 \renewcommand\thesubsubsection{%
1034 \thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
1035 }{
1036 \renewcommand\thechapter{%
1037 \basexii{\value{chapter}}{\x}{\e}}
1038 \renewcommand\thesection{%
1039 \thechapter.\basexii{\value{section}}{\x}{\e}}
1040 \renewcommand\thesubsection{%
1041 \thesection.\basexii{\value{subsection}}{\x}{\e}}
1042 \renewcommand\thesubsubsection{%
1043 \thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
1044 } % end if it's defined
1045 }
1046 }
1047 }{} % end redefinition of counters block
1048 % \end{macrocode}
1049 % Now we begin the number-to-word macros. First, we define
1050 % the macros which allow the user to specify his own words
1051 % for each rank:
1052 % \begin{macrocode}
1053 \def\dozrankoneword{unqua}
1054 \def\dozranktwoword{biqua}
1055 \def\dozrankthreeword{triqua}
1056 \def\dozrankfourword{quadqua}
1057 \def\dozrankfiveword{pentqua}
1058 \def\dozranksixword{hexqua}
1059 \def\dozranksevenword{septqua}
1060 \def\dozrankeightword{octqua}
1061 \def\dozranknineword{ennqua}
1062 \def\dozranktenword{decqua}
1063 \def\dozrankelvword{elvqua}
1064 % \end{macrocode}
1065 % Then we define some |\if|s to help us decide how we should
1066 % capitalize the end result.
1067 % \begin{macrocode}
1068 \newif\ifDOZcaps\DOZcapsfalse
1069 \newif\ifDozcaps\Dozcapsfalse
1070 % \end{macrocode}
1071 % Then, we give some utility macros:
1072 % \begin{macrocode}
1073 \def\doz@expandloop#1{\doz@xloop#1\relax}
1074 \def\doz@xloop#1{%
1075 \ifx\relax#1\else%
1076 \doz@numword#1%
1077 \expandafter\doz@xloop\fi%
1078 }
1079 \def\printdozrankword{}
1080 \def\doz@rankword{%
1081 \ifnum\doz@countchar=12
1082 \def\printdozrankword{\dozrankelvword}%
1083 \fi
1084 \ifnum\doz@countchar=11
1085 \def\printdozrankword{\dozranktenword}%
1086 \fi
1087 \ifnum\doz@countchar=10
1088 \def\printdozrankword{\dozranknineword}%
1089 \fi
1090 \ifnum\doz@countchar=9
1091 \def\printdozrankword{\dozrankeightword}%
1092 \fi
1093 \ifnum\doz@countchar=8
1094 \def\printdozrankword{\dozranksevenword}%
1095 \fi
1096 \ifnum\doz@countchar=7
1097 \def\printdozrankword{\dozranksixword}%
1098 \fi
1099 \ifnum\doz@countchar=6
1100 \def\printdozrankword{\dozrankfiveword}%
1101 \fi
1102 \ifnum\doz@countchar=5
1103 \def\printdozrankword{\dozrankfourword}%
1104 \fi
1105 \ifnum\doz@countchar=4
1106 \def\printdozrankword{\dozrankthreeword}%
1107 \fi
1108 \ifnum\doz@countchar=3
1109 \def\printdozrankword{\dozranktwoword}%
1110 \fi
1111 \ifnum\doz@countchar=2
1112 \def\printdozrankword{\dozrankoneword}%
1113 \fi
1114 \ifnum\doz@countchar=1
1115 \def\printdozrankword{\relax}%
1116 \fi
1117 \advance\doz@countchar by-1
1118 \ifDOZcaps
1119 \edef\printdozrankword{\uppercase{\printdozrankword}}%
1120 \fi
1121 \ifDozcaps
1122 \edef\printdozrankword{\capitalisewords{\printdozrankword}}%
1123 \fi
1124 \ifnum\doz@countchar>0
1125 \ \printdozrankword\ %
1126 \else
1127 \printdozrankword%
1128 \fi
1129 }%
1130 \def\doz@numword#1{%
1131 \IfStrEq{#1}{0}{\def\doz@numberword{zero}}{}%
1132 \IfStrEq{#1}{1}{\def\doz@numberword{one}}{}%
1133 \IfStrEq{#1}{2}{\def\doz@numberword{two}}{}%
1134 \IfStrEq{#1}{3}{\def\doz@numberword{three}}{}%
1135 \IfStrEq{#1}{4}{\def\doz@numberword{four}}{}%
1136 \IfStrEq{#1}{5}{\def\doz@numberword{five}}{}%
1137 \IfStrEq{#1}{6}{\def\doz@numberword{six}}{}%
1138 \IfStrEq{#1}{7}{\def\doz@numberword{seven}}{}%
1139 \IfStrEq{#1}{8}{\def\doz@numberword{eight}}{}%
1140 \IfStrEq{#1}{9}{\def\doz@numberword{nine}}{}%
1141 \IfStrEq{#1}{X}{\def\doz@numberword{ten}}{}%
1142 \IfStrEq{#1}{E}{\def\doz@numberword{eleven}}{}%
1143 \ifDOZcaps
1144 \edef\doz@numberword{\uppercase{\doz@numberword}}%
1145 \fi
1146 \ifDozcaps
1147 \edef\doz@numberword{\makefirstuc{\doz@numberword}}%
1148 \fi
1149 \doz@numberword%
1150 \doz@rankword%
1151 }%
1152 \def\doznumtoword#1{%
1153 \edef\thenumber{\basexii{\value{#1}}{X}{E}}%
1154 \expandafter\doz@charcount\expandafter{\thenumber}%
1155 \expandafter\doz@expandloop\expandafter{\thenumber}%
1156 \doz@countchar=0%
1157 }%
1158 \def\DOZnumtoword#1{%
1159 \DOZcapstrue%
1160 \doznumtoword{#1}%
1161 \DOZcapsfalse%
1162 }%
1163 \def\Doznumtoword#1{%
1164 \Dozcapstrue%
1165 \doznumtoword{#1}%
1166 \Dozcapsfalse%
1167 }%
1168 % \end{macrocode}
1169 % Our last job is to make sure the semicolon (Humphrey
1170 % point) works correctly as a radix point in math mode.
1171 % This code is adapted from the |icomma| package by Walter
1172 % Schmidt.
1173 % \begin{macrocode}
1174 \AtBeginDocument{%
1175 \mathchardef\humphrey\mathcode`\;%
1176 \mathcode`\;="8000 %
1177 }
1178 {\catcode`;=\active
1179 \gdef;{\futurelet\@let@token\sm@rtsemi}
1180 }
1181 \def\sm@rtsemi{%
1182 \ifx\@let@token\@sptoken \else
1183 \ifx\@let@token\space \else
1184 \mathord\fi\fi \humphrey}
1185 % \end{macrocode}
1186 % And that's the end. Thanks for reading,
1187 % folks; please email me with any suggestions or improvements.