Debian Codegraph @

texmf-dist/source/fonts/archaic/oands.dtx

raw
1 % \iffalse meta-comment
2 %
3 % oands.dtx
4 %
5 % Author: Peter Wilson (Herries Press) herries dot press at earthlink dot net
6 % Copyright 2000--2005 Peter R. Wilson
7 %
8 % This work may be distributed and/or modified under the
9 % conditions of the Latex Project Public License, either
10 % version 1.3 of this license or (at your option) any
11 % later version.
12 % The latest version of the license is in
13 % http://www.latex-project.org/lppl.txt
14 % and version 1.3 or later is part of all distributions of
15 % LaTeX version 2003/06/01 or later.
16 %
17 % This work has the LPPL maintenance status "author-maintained".
18 %
19 % This work consists of the files listed in the README file.
20 %
21 %
22 % If you do not have the docmfp package (available from CTAN in
23 % tex-archive/macros/latex/contrib), comment out the
24 % \usepackage{docmfp} line below and uncomment the line following it.
25 %
26 %<*driver>
27 \documentclass[twoside]{ltxdoc}
28 \usepackage{docmfp}
29 %%%%%% \providecommand{\DescribeVariable}[1]{} \newenvironment{routine}[1]{}{}
30 \usepackage{url}
31 \usepackage[draft=false,
32 plainpages=false,
33 pdfpagelabels,
34 bookmarksnumbered,
35 hyperindex=false
36 ]{hyperref}
37 \providecommand{\phantomsection}{}
38 \OnlyDescription %% comment this out for the full glory
39 \EnableCrossrefs
40 \CodelineIndex
41 \setcounter{StandardModuleDepth}{1}
42 \makeatletter
43 \@mparswitchfalse
44 \makeatother
45 \renewcommand{\MakeUppercase}[1]{#1}
46 \pagestyle{headings}
47 \newenvironment{addtomargins}[1]{%
48 \begin{list}{}{%
49 \topsep 0pt%
50 \addtolength{\leftmargin}{#1}%
51 \addtolength{\rightmargin}{#1}%
52 \listparindent \parindent
53 \itemindent \parindent
54 \parsep \parskip}%
55 \item[]}{\end{list}}
56 \begin{document}
57 \raggedbottom
58 \DocInput{oands.dtx}
59 \end{document}
60 %</driver>
61 %
62 % \fi
63 %
64 % \CheckSum{34}
65 %
66 % \DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath}
67 % \DoNotIndex{\@centercr,\@cite}
68 % \DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
69 % \DoNotIndex{\@input,\@ixpt,\@m}
70 % \DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint}
71 % \DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
72 % \DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
73 % \DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
74 % \DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
75 % \DoNotIndex{\advance,\Alph,\alph}
76 % \DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
77 % \DoNotIndex{\bullet}
78 % \DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
79 % \DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
80 % \DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
81 % \DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
82 % \DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
83 % \DoNotIndex{\fbox}
84 % \DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
85 % \DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
86 % \DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
87 % \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
88 % \DoNotIndex{\input}
89 % \DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
90 % \DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
91 % \DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
92 % \DoNotIndex{\NeedsTeXFormat,\newdimen}
93 % \DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
94 % \DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
95 % \DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
96 % \DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
97 % \DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
98 % \DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font}
99 % \DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman}
100 % \DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength}
101 % \DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
102 % \DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
103 % \DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
104 % \DoNotIndex{\viipt,\vipt,\vskip,\vspace}
105 % \DoNotIndex{\wd,\xiipt,\year,\z@}
106 %
107 % \changes{v1.0}{2000/08/19}{First public release}
108 % \changes{v1.1}{2005/04/02}{Minor circumstantial changes and for Postscript}
109 %
110 % \def\fileversion{v1.0} \def\filedate{2000/08/19}
111 % \def\fileversion{v1.1} \def\filedate{2005/04/02}
112 % \newcommand*{\Lpack}[1]{\textsf {#1}} ^^A typeset a package
113 % \newcommand*{\Lopt}[1]{\textsf {#1}} ^^A typeset an option
114 % \newcommand*{\file}[1]{\texttt {#1}} ^^A typeset a file
115 % \newcommand*{\Lcount}[1]{\textsl {\small#1}} ^^A typeset a counter
116 % \newcommand*{\pstyle}[1]{\textsl {#1}} ^^A typeset a pagestyle
117 % \newcommand*{\Lenv}[1]{\texttt {#1}} ^^A typeset an environment
118 % \newcommand*{\AD}{\textsc{ad}}
119 % \newcommand*{\thisfont}{OandS}
120 %
121 % \title{The \Lpack{OandS} fonts\thanks{This
122 % file has version number \fileversion, last revised
123 % \filedate.}}
124 %
125 % \author{%
126 % Peter Wilson\thanks{\texttt{herries dot press at earthlink dot net}}\\
127 % Herries Press
128 % }
129 % \date{\filedate}
130 % \maketitle
131 % \begin{abstract}
132 % The \Lpack{oands} bundle provides a set of
133 % miscellaneous characters for use when transliterating ancient scripts.
134 % This is one in a series for archaic scripts.
135 % \end{abstract}
136 % \tableofcontents
137 %
138 % \section{Introduction}
139 %
140 % The \Lpack{oands} bundle provides a Postscript Type1 version of an
141 % original Metafont~\cite{METAFONT} design
142 % of the \thisfont{} fonts. These are odd characters used in transliterating
143 % archaic scripts, like Hieroglyphic, into a modern alphabet. The font is
144 % part of a project to provide fonts showing the development of the
145 % modern Latin alphabet from ancient times.
146 %
147 % This manual is typeset according to the conventions of the
148 % \LaTeX{} \textsc{docstrip} utility which enables the automatic
149 % extraction of the \LaTeX{} macro source files~\cite{GOOSSENS94}.
150 % The \Lpack{docmfp} package is used for documenting the Metafont portions
151 % of the distribution~\cite{DOCMFP}.
152 %
153 % Section~\ref{sec:usc} describes the usage of the package.
154 % Commented code for the fonts and package may be in later sections.
155 %
156 %
157 % \subsection{The \thisfont{} script}
158 %
159 % The \thisfont{} font currently consists of just two characters. One is
160 % a `mirrored apostrophe' accessed via the single left quote character.
161 % The other is a sign representing a glottal stop; it looks like the numeral 3
162 % with a flat top and is accessed via the lowercase z character.
163 %
164 % \section{The \Lpack{oands} package} \label{sec:usc}
165 %
166 % The \thisfont{} font family is called |oands|. The font is supplied
167 % both upright and italic forms and in both
168 % OT1 and T1 encodings.
169 %
170 %
171 % \DescribeMacro{\oandsfamily}
172 % The |\oandsfamily| declaration starts typesetting with the \thisfont{} fonts.
173 % Use of the \thisfont{} font will continue until either there is another |\...family|
174 % declaration or the current group (e.g., environment) is closed.
175 %
176 % \DescribeMacro{\textoands}
177 % The command |\textoands{|\meta{text}|}| will typeset \meta{text} using the
178 % \thisfont{} fonts.
179 %
180 % The complete font may be printed by |\textoands{` z}|.
181 %
182 %
183 % \StopEventually{
184 % \bibliographystyle{alpha}
185 % \renewcommand{\refname}{Bibliography}
186 % \begin{thebibliography}{GMS94}
187 % \addcontentsline{toc}{section}{\refname}
188 %
189 % \bibitem[Knu92]{METAFONT}
190 % Donald E.~Knuth.
191 % \newblock \emph{The METAFONTbook}.
192 % \newblock Addison-Wesley, 1992.
193 %
194 % \bibitem[Knu87]{CM}
195 % Donald E.~Knuth.
196 % \newblock \emph{Computer Modern Typefaces}.
197 % \newblock Addison-Wesley, 1987.
198 %
199 % \bibitem[GMS94]{GOOSSENS94}
200 % Michel Goossens, Frank Mittelbach, and Alexander Samarin.
201 % \newblock \emph{The LaTeX Companion}.
202 % \newblock Addison-Wesley Publishing Company, 1994.
203 %
204 % \bibitem[Wil99]{DOCMFP}
205 % Peter R.~Wilson.
206 % \newblock \emph{The DOCMFP Package}.
207 % \newblock (Available from CTAN in \texttt{macros/latex/contrib}).
208 % \newblock 1999.
209 %
210 % \end{thebibliography}
211 %
212 % \PrintIndex
213 %
214 % }
215 %
216 %
217 %
218 % \section{The Metafont code} \label{sec:mf}
219 %
220 %
221 % \subsection{The parameter file}
222 %
223 % We deal with the parameter files first, and start by announcing
224 % what they are for. The \thisfont{} font comes in one size as a normal
225 % and italic font.
226 %
227 % \begin{macrocode}
228 %<*base10|base10i>
229 %<base10>%%% OANDSU10.MF oands upright font at 10 point design size.
230 %<base10i>%%% OANDSI10.MF oands italic font at 10 point design size.
231 %
232 % \end{macrocode}
233 % The parameters from CMR are used~\cite{CM}. We also
234 % make sure that \Lpack{cmbase} is loaded as well
235 % as plain Metafont.
236 % \begin{macrocode}
237 if unknown cmbase: input cmbase fi
238
239 % \end{macrocode}
240 %
241 % \begin{routine}{mirror_comma}
242 % We need an additional routine for a `mirrored' comma. It might
243 % just as well go here as the number of families is very limited and it
244 % will save on a file. The code is based on Knuth's \file{cmbase.mf}.
245 % \begin{macrocode}
246 def mirror_comma(suffix $, @)(expr dot_size, jut, depth) =
247 pickup fine.nib;
248 pos$(dot_size,90);
249 if square_dots:
250 pos$'(dot_size,0);
251 z$'=z$;
252 dot($',$); % squarish dot
253 comma_join_ := max(fine.breadth, floor .7dot_size);
254 comma_bot_ := max(fine.breadth, floor .5dot_size);
255 pos@0(comma_join_, 0); pos@1(comma_join_, 0); pos@2(comma_bot_, 0);
256 y@0=y$; y@1=y$1; y@2=y@1-depth;
257 x@0r=x@1r=x$'r;
258 rt x@2r=good.x(x$-eps);
259 filldraw stroke z@[email protected]@2e; % tail
260 else:
261 pos@1(vair,-90); pos@2(vair,0); pos@3(vair,45);
262 z@1r=z$r; lft x@2l=hround(x$-.5dot_size-jut)-2eps; x@3=x$+.5u;
263 y@2=1/3[y@1,y@3]; bot y@3r=vround(y$-.5dot_size-depth);
264 y_ := ypart((z@1{left}...z@2{down}...z@3)
265 intersectiontimes (z$r{left}..{right}z$l));
266 if y_ < 0: y_ :=1; fi
267 filldraw z$l{right}..subpath (0,y_) of (z$r{left}..{right}z$l)--cycle; % dot
268 filldraw stroke z@1e{left}...z@2e{down}...z@3e; % tail
269 fi
270 penlabels(@1,@2,@3);
271 enddef;
272
273 % \end{macrocode}
274 % \end{routine}
275 %
276 % Now for the parameters.
277 % \begin{macrocode}
278 %<base10>font_identifier:="OANDSU"; font_size 10pt#;
279 %<base10i>font_identifier:="OANDSI"; font_size 10pt#;
280
281 % \end{macrocode}
282 %
283 % \DescribeVariable{u}
284 % The unit width.
285 % \begin{macrocode}
286 %<base10> u# := 20/36pt#; % unit width
287 %<base10i> u# := 18.4/36pt#; % unit width
288 % \end{macrocode}
289 %
290 % \DescribeVariable{width_adj}
291 % \DescribeVariable{serif_fit}
292 % \DescribeVariable{cap_serif_fit}
293 % \DescribeVariable{letter_fit}
294 % The majority of these parameters and values are constant.
295 % They are for fine adjustements of characters.
296 % \begin{macrocode}
297 width_adj#:=0pt#; % width adjustment for certain characters
298 serif_fit#:=0pt#; % extra sidebar near lowercase serifs
299 cap_serif_fit#:=3.5/36pt#; % extra sidebar near uppercase serifs
300 %<base10> letter_fit#:=9.2/36pt#; % extra space added to all sidebars
301 %<base10i> letter_fit#:=0pt#; % extra space added to all sidebars
302
303 % \end{macrocode}
304 %
305 % \DescribeVariable{body_height}
306 % \DescribeVariable{asc_height}
307 % \DescribeVariable{cap_height}
308 % \DescribeVariable{fig_height}
309 % \DescribeVariable{x_height}
310 % \DescribeVariable{math_axis}
311 % \DescribeVariable{bar_height}
312 % \DescribeVariable{comma_depth}
313 % \DescribeVariable{desc_depth}
314 % This set of parameters defines the upper and lower limits
315 % on the characters.
316 % \begin{macrocode}
317 body_height# := 270/36pt#; % Height of tallest character
318 asc_height# := 250/36pt#; % Height of lowercase ascenders
319 cap_height# := 246/36pt#; % Height of caps
320 fig_height# := 232/36pt#; % Height of numerals
321 x_height# := 155/36pt#; % Height of lowercase without ascenders
322 math_axis# := 90/36pt#; % axis of symmetry for math symbols
323 bar_height# := 87/36pt#; % height of crossbar in lowercase e
324 comma_depth# := 70/36pt#; % depth of comma below baseline
325 desc_depth# := 70/36pt#; % depth of lowercase descenders
326
327 % \end{macrocode}
328 %
329 % \DescribeVariable{crisp}
330 % \DescribeVariable{tiny}
331 % \DescribeVariable{fine}
332 % \DescribeVariable{thin_join}
333 % \DescribeVariable{hair}
334 % \begin{macrocode}
335 crisp# := 0pt#; % diameter of serif corners
336 tiny# := 8/36pt#; % diameter of rounded corners
337 fine# := 7/36pt#; % diameter of sharply rounded corners
338 thin_join# := 7/36pt#; % width of extrafine details
339 hair# := 9/36pt#; % lowercase hairline breadth
340 % \end{macrocode}
341 %
342 % \DescribeVariable{stem}
343 % \DescribeVariable{curve}
344 % \DescribeVariable{ess}
345 % \DescribeVariable{flare}
346 % \DescribeVariable{dot_size}
347 % \begin{macrocode}
348 stem# := 25/36pt#; % lowercase stem breadth
349 curve# := 30/36pt#; % lowercase curve breadth
350 ess# := 27/36pt#; % breadth in middle of lowercase s
351 flare# := 33/36pt#; % diameter of bulbs or breadth of terminals
352 dot_size# := 38/36pt#; % diameter of dots
353 % \end{macrocode}
354 %
355 % \DescribeVariable{cap_hair}
356 % \DescribeVariable{cap_stem}
357 % \DescribeVariable{cap_curve}
358 % \DescribeVariable{cap_ess}
359 % \DescribeVariable{rule_thickness}
360 % \begin{macrocode}
361 cap_hair# := 11/36pt#; % uppercase hairline breadth
362 cap_stem# := 32/36pt#; % uppercase stem breadth
363 cap_curve# := 37/36pt#; % uppercase curve breadth
364 cap_ess# := 35/36pt#; % breadth in middle of uppercase S
365 rule_thickness# := 0.4pt#; % thickness of lines in math symbols
366 % \end{macrocode}
367 %
368 % \DescribeVariable{dish}
369 % \DescribeVariable{bracket}
370 % \DescribeVariable{jut}
371 % \DescribeVariable{cap_jut}
372 % \DescribeVariable{beak_jut}
373 % \begin{macrocode}
374 dish# := 1/36pt#; % amount erased at top or bottom of serifs
375 bracket# := 20/36pt#; % vertical distance from serif base to tangent
376 jut# := 28/36pt#; % protrusion of lowercase serifs
377 cap_jut# := 37/36pt#; % protrusion of uppercase serifs
378 beak_jut# := 10/36pt#; % horizontal protrusion of beak serifs
379 % \end{macrocode}
380 %
381 % \DescribeVariable{beak}
382 % \DescribeVariable{vair}
383 % \DescribeVariable{notch_cut}
384 % \DescribeVariable{bar}
385 % \DescribeVariable{slab}
386 % \begin{macrocode}
387 beak# := 70/36pt#; % vertical protrusion of beak serifs
388 vair# := 8/36pt#; % vertical diameter of hairlines
389 notch_cut# := 10pt#; % max breadth above/below notches
390 bar# := 11/36pt#; % lowercase bar thickness
391 slab# := 11/36pt#; % serif and arm thickness
392 % \end{macrocode}
393 %
394 % \DescribeVariable{cap_bar}
395 % \DescribeVariable{cap_band}
396 % \DescribeVariable{cap_notch_cut}
397 % \DescribeVariable{serif_drop}
398 % \DescribeVariable{stem_corr}
399 % \begin{macrocode}
400 cap_bar# := 11/36pt#; % uppercase bar thickness
401 cap_band# := 11/36pt#; % uppercase thickness above/below lobes
402 cap_notch_cut# := 10pt#; % max breadth above/below uppercase notches
403 serif_drop# := 4/36pt#; % vertical drop of sloped serifs
404 stem_corr# := 1/36pt#; % small refinement of stem breadth
405 % \end{macrocode}
406 %
407 % \DescribeVariable{vair_corr}
408 % \DescribeVariable{apex_corr}
409 % \DescribeVariable{o}
410 % \DescribeVariable{apex_o}
411 % \DescribeVariable{slant}
412 % \begin{macrocode}
413 vair_corr# := 1/36pt#; % small refinement of hairline height
414 apex_corr# := 0pt#; % extra width at diagonal junctions
415 o# := 8/36pt#; % amount of overshoot for curves
416 apex_o# := 8/36pt#; % amount of overshoot for diagonal junctions
417 %<base10> slant := 0; % tilt ratio (\Delta x / \Delta y)
418 %<base10i> slant := 0.25; % tilt ratio (\Delta x / \Delta y)
419 % \end{macrocode}
420 %
421 % \DescribeVariable{fudge}
422 % \DescribeVariable{math_spread}
423 % \DescribeVariable{superness}
424 % \DescribeVariable{superpull}
425 % \DescribeVariable{beak_darkness}
426 % \begin{macrocode}
427 fudge := 1; % facto applied to weights of heavy characters
428 math_spread := 0; % extra openness of math symbols
429 superness := 1/sqrt2; % parameter for superellipses
430 superpull := 1/6; % extra openness inside bowls
431 beak_drakness := 11/30; % fraction of triangle inside beak serifs
432 % \end{macrocode}
433 %
434 % \DescribeVariable{ligs}
435 % \DescribeVariable{square_dots}
436 % \DescribeVariable{hefty}
437 % \DescribeVariable{serifs}
438 % \DescribeVariable{monospace}
439 % \begin{macrocode}
440 ligs := 2; % level of ligatures to be included
441 square_dots := false; % should dots be square?
442 hefty := false; % should we try hard not to be overweight?
443 serifs := true; % should serifs and bulbs be attached?
444 monospace := false; % should all characyers have the same width?
445 % \end{macrocode}
446 %
447 % \DescribeVariable{variant_g}
448 % \DescribeVariable{low_asterisk}
449 % \DescribeVariable{math_fitting}
450 % \begin{macrocode}
451 %<base10> variant_g := false; % should an italic-style g be used?
452 %<base10i> variant_g := true; % should an italic-style g be used?
453 low_asterisk := false; % should the asterisk be centered at the axis?
454 math_fitting := false; % should math-mode spacing be used?
455
456 % \end{macrocode}
457 %
458 %
459 % Finally, call the driver file for the font.
460 % \begin{macrocode}
461 %<base10> generate oandsup %% switch to the driver file
462 %<base10i> generate oandsit %% switch to the driver file
463
464 % \end{macrocode}
465 %
466 % The end of this code section.
467 % \begin{macrocode}
468 %</base10|base10i>
469 % \end{macrocode}
470 %
471 %
472 % \subsection{The driver files}
473 %
474 % The driver file sets up the font parameters and also contains
475 % the macros used in the definition of the characters.
476 %
477 % \begin{macrocode}
478 %<*mfdu>
479 % OANDSUP.MF setup for the upright OANDS font.
480
481 % \end{macrocode}
482 % This file is based on Knuth's \file{roman.mf}.
483 %
484 % \begin{macrocode}
485
486 if ligs>1: font_coding_scheme:="TeX text";
487 else: font_coding_scheme:=if ligs=0: "TeX typewriter text"
488 else: "TeX text without f-ligatures"
489 fi;
490 fi
491
492 mode_setup; font_setup;
493
494 input oandsym;
495
496 font_slant slant; font_x_height x_height#;
497 if monospace: font_normal_space 9u#; % no stretching or shrinking
498 font_quad 18u#;
499 font_extra_space 9u#;
500 else: font_normal_space 6u#+2letter_fit#;
501 font_normal_stretch 3u#; font_normal_shrink 2u#;
502 font_quad 18u#+4letter_fit#;
503 font_extra_space 2u#;
504 k#:=-.5u#; kk#:=-1.5u#; kkk#:=-2u#; % three degrees of kerning
505 % \end{macrocode}
506 % There are no ligatures at this time.
507 % \begin{macrocode}
508 fi
509
510 bye.
511
512 %</mfdu>
513 % \end{macrocode}
514 %
515 % Now the italic driver file, which is based on Knuth's \file{textit.mf}.
516 %
517 % \begin{macrocode}
518 %<*mfdi>
519 % file OANDSIT.MF Italic setup for OANDS font
520
521 mode_setup; font_setup;
522
523 if ligs>1: font_coding_scheme:="TeX text";
524 else: font_coding_scheme:=if ligs=0: "TeX typewriter text"
525 else: "TeX text without f-ligatures"
526 fi;
527 fi
528
529 font_slant slant; font_x_height x_height#;
530 if monospace: font_normal_space 9u#; % no stretching or shrinking
531 font_quad 18u#;
532 font_extra_space 9u#;
533 letter_fit#:=letter_fit:=0;
534 else: font_normal_space 6u#+2letter_fit#;
535 font_normal_stretch 3u#; font_normal_shrink 2u#;
536 font_quad 18u#+4letter_fit#;
537 font_extra_space 2u#; fi
538
539 input oandsym;
540
541 if not monospace:
542 k#:=-.5u#; kk#:=-1.5u#; kkk#:=-2u#; % three degrees of kerning
543 % \end{macrocode}
544 % There are no ligatures at this time.
545 % \begin{macrocode}
546 fi
547
548 bye.
549
550 %</mfdi>
551 % \end{macrocode}
552 %
553 %
554 % \subsection{The code for the characters}
555 %
556 % The following code is for the characters making up the font.
557 %
558 % \begin{macrocode}
559 %<*min>
560 % OANDSYM.MF Program file for oands characters
561 %
562
563 % \end{macrocode}
564 %
565 %
566 % \begin{routine}{`}
567 % A mirrored apostrophe, based on Knuth's apostrophe from \file{punct.mf}.
568 % \begin{macrocode}
569 cmchar "Mirrored apostrophe";
570 beginchar("`",5u#,asc_height#,0);
571 italcorr asc_height#*slant+.5dot_size#-2u#;
572 adjust_fit(0,0);
573 x1-.5dot_size=hround(.5w-.5dot_size); y1+.5dot_size=h;
574 if monospace:
575 mirror_comma(1,a,dot_size,.28u,vround 1.5comma_depth); % large one
576 else:
577 mirror_comma(1,a,dot_size,.25u,comma_depth); % normal one
578 fi
579 penlabels(1);
580 endchar;
581
582 % \end{macrocode}
583 % \end{routine}
584 %
585 % \begin{routine}{z}
586 % A representation of a glottal stop. It looks somewhat like an oldstyle
587 % digit 3 with a flat top, or the way I handwrite a lowercase z with a tail.
588 % It is based on a combination of 3 and 7 from Knuth's \file{olddig.mf} file.
589 % \changes{v1.1}{2005/04/02}{Slimmed down the glottal stop}
590 % \begin{macrocode}
591 cmchar "The glottal stop z";
592 beginchar("z",9u#,x_height#,desc_depth#);
593 italcorr .8x_height#*slant-.4u#;
594 adjust_fit(0,0);
595 numeric top_thickness,mid_thickness,bot_thickness;
596 top_thickness=max(fine.breadth,vround(slab-2vair_corr));
597 mid_thickness=max(fine.breadth,vround 2/3vair);
598 bot_thickness=max(fine.breadth,vround(slab-vair_corr));
599 pickup fine.nib;
600 % \end{macrocode}
601 % The lower bowl from the 3 character.
602 % \begin{macrocode}
603 pos5(vair,-90);
604 pos6(mid_thickness,90);
605 x6=x8=.5[1.5u,x7];
606 pos7(cap_curve,0); rt x7r=hround(w-.75u);
607 lft x5=min(hround 3u,lft x6);
608 pos8(bot_thickness,-90); bot y8r=-d-o;
609 y7=.5[bot y6l,top y8l];
610 top y5l=vround(.54[-d,h]+.5vair); y5r=y6l;
611 filldraw z5r--z6l--z6r--z5l---cycle; % middle tip
612 filldraw stroke pulled_super_arc.e(6,7)(.5superpull)
613 & pulled_super_arc.e(7,8)(.5superpull); % lower bowl
614 if serifs:
615 numeric bulb_diam[];
616 bulb_diam2=flare+cap_stem-stem;
617 pos10(bulb_diam2,-180);
618 pos9(cap_hair,-180);
619 lft x10r=hround .75u; y10=max(.1[-d,h]+.5bulb_diam2,.3[-d,h]-.5bulb_diam2);
620 bulb(8,9,10); % lower bulb
621 else:
622 pos9(bot_thickness,angle(-2u,-h-d));
623 lft x9r=hround .75u; top y9l=(vround .25[-d,h])-o;
624 y9r:=good.y y9r-eps; x9l:=good.x x9l;
625 filldraw stroke term.e(8,9,left,1,4); % lower terminal
626 fi
627 % \end{macrocode}
628 % The top half of the 7 character.
629 % \begin{macrocode}
630 numeric arm_thickness, bot_width, top_shift, top_hair;
631 %%%if hefty: arm_thickness=Vround(slab+2stem_corr); top_shift=0;
632 %%% bot_width=hround .51[curve,cap_curve]; top_hair=.4[thin_join,bot_width];
633 %%%else: arm_thickness=Vround .4[stem,cap_stem]; top_shift=.5u;
634 %%% bot_width=flare; top_hair=cap_hair; fi
635 if hefty: arm_thickness=Vround(vair-vair_corr); top_shift=0;
636 bot_width=hround .51[curve,cap_curve]; top_hair=.4[thin_join,bot_width];
637 else: arm_thickness=vair; top_shift=.5u;
638 bot_width=flare; top_hair=cap_hair; fi
639 if top_hair<tiny.breadth: top_hair:=tiny.breadth; fi
640 pickup crisp.nib;
641 pos2(arm_thickness,90);
642 pos1(hair,180);
643 top y2r=h; rt x2=hround(w-.75u+top_shift);
644 lft x1r=hround(.75u+.5top_shift); y1=good.y(y2l-beak/2)-eps;
645 arm(2,1,a,.3beak_darkness,-beak_jut); % arm and beak
646 pos3(hair,180); y3=good.y(y2r+beak/6)+eps; z3r=whatever[z1r,z.a0];
647 penpos2'(2epsilon,-90); z2'=z2r;
648 arm(2',3,b,beak_darkness,x3r-x.a0); % upward extension of beak
649 pickup tiny.nib;
650 pos4(top_hair,0);
651 bot y4=max(h-arm_thickness,h-slab,bot y2l); rt x4r=crisp.rt x2;
652 if hefty:
653 else:
654 erase fill rt z4r--z4r--z5r--(rt x4r,y5)--cycle; % erase excess at top
655 filldraw stroke z4e---z5e; % stroke
656 fi
657 penlabels(0,1,2,3,4,5,6,7,8,9,10);
658 endchar;
659
660 % \end{macrocode}
661 % \end{routine}
662 %
663 %
664 % The end of this file
665 % \begin{macrocode}
666 %</min>
667 % \end{macrocode}
668 %
669 %
670 % \section{The font definition files} \label{sec:fd}
671 %
672 % The font comes in normal and italic only.
673 %
674 % \begin{macrocode}
675 %<*fdot1>
676 \DeclareFontFamily{OT1}{oands}{}
677 \DeclareFontShape{OT1}{oands}{m}{n}{ <-> oandsu10 }{}
678 \DeclareFontShape{OT1}{oands}{bx}{n}{ <-> sub oands/m/n }{}
679 \DeclareFontShape{OT1}{oands}{b}{n}{ <-> sub oands/m/n }{}
680 \DeclareFontShape{OT1}{oands}{m}{it}{ <-> oandsi10 }{}
681 \DeclareFontShape{OT1}{oands}{m}{sl}{ <-> sub oands/m/it }{}
682 %</fdot1>
683 % \end{macrocode}
684 %
685 %
686 % \begin{macrocode}
687 %<*fdt1>
688 \DeclareFontFamily{T1}{oands}{}
689 \DeclareFontShape{T1}{oands}{m}{n}{ <-> oandsu10 }{}
690 \DeclareFontShape{T1}{oands}{bx}{n}{ <-> sub oands/m/n }{}
691 \DeclareFontShape{T1}{oands}{b}{n}{ <-> sub oands/m/n }{}
692 \DeclareFontShape{T1}{oands}{m}{it}{ <-> oandsi10 }{}
693 \DeclareFontShape{T1}{oands}{m}{sl}{ <-> sub oands/m/it }{}
694 %</fdt1>
695 % \end{macrocode}
696 %
697 % \section{The package code} \label{sec:code}
698 %
699 % \subsection{The \Lpack{oands} package}
700 %
701 % The \Lpack{oands} package is for typesetting short pieces of text
702 % in the \thisfont{} fonts.
703 %
704 % Announce the name and version of the package, which requires
705 % \LaTeXe{}.
706 % \begin{macrocode}
707 %<*usc>
708 \NeedsTeXFormat{LaTeX2e}
709 \ProvidesPackage{oands}[2000/08/19 v1.0 package for OandS fonts]
710 % \end{macrocode}
711 %
712 % \begin{macro}{\Tienc}
713 % A macro for testing the value of |\encodingdefault|.
714 % \begin{macrocode}
715 \providecommand{\Tienc}{T1}
716 % \end{macrocode}
717 % \end{macro}
718 %
719 %
720 % \begin{macro}{\oandsfamily}
721 % Selects the \thisfont{} font family in the OT1 or T1 encoding.
722 % \begin{macrocode}
723 \ifx\Tienc\encodingdefault
724 \newcommand{\oandsfamily}{\usefont{T1}{oands}{m}{n}}
725 \else
726 \newcommand{\oandsfamily}{\usefont{OT1}{oands}{m}{n}}
727 \fi
728 % \end{macrocode}
729 % \end{macro}
730 %
731 % \begin{macro}{\textoands}
732 % Text command for the \thisfont{} font family.
733 % \begin{macrocode}
734 \DeclareTextFontCommand{\textoands}{\oandsfamily}
735 % \end{macrocode}
736 % \end{macro}
737 %
738 % The end of this package.
739 % \begin{macrocode}
740 %</usc>
741 % \end{macrocode}
742 %
743 % \section{Postscript Type1 map file}
744 %
745 % Just a line or two.
746 % \changes{v1.1}{2005/04/02}{Added map file}
747 % \begin{macrocode}
748 %<*map>
749 oandsu10 Archaic-OandS <oandsu10.pfb
750 oandsi10 Archaic-OandS-Italic <oandsi10.pfb
751 %</map>
752 % \end{macrocode}
753 %
754 %
755 % \Finale
756 % ^^A \PrintIndex
757 %
758 \endinput
759
760 %% \CharacterTable
761 %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
762 %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
763 %% Digits \0\1\2\3\4\5\6\7\8\9
764 %% Exclamation \! Double quote \" Hash (number) \#
765 %% Dollar \$ Percent \% Ampersand \&
766 %% Acute accent \' Left paren \( Right paren \)
767 %% Asterisk \* Plus \+ Comma \,
768 %% Minus \- Point \. Solidus \/
769 %% Colon \: Semicolon \; Less than \<
770 %% Equals \= Greater than \> Question mark \?
771 %% Commercial at \@ Left bracket \[ Backslash \\
772 %% Right bracket \] Circumflex \^ Underscore \_
773 %% Grave accent \` Left brace \{ Vertical bar \|
774 %% Right brace \} Tilde \~}
775
776