Debian Codegraph @

texmf-dist/fonts/source/public/mxedruli/xuc10.mf

raw
1 % Xucuri Font 10 point Normal Face `xuc10.mf'
2 %
3 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
4 % Designed by Johannes Heinecke %
5 % <[email protected]> %
6 % This software is under the LaTeX Project Public License %
7 % Please send any improvements, corrections, suggestions, enhancements etc %
8 % to the Author! %
9 % %
10 % Version 0.3 as of 17th July 1998 %
11 % %
12 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
13 %
14 % Based on the parameters as in CMR10
15
16 % if unknown cmbase: input cmbase fi
17 if unknown xucbase: input xucbase fi
18
19 font_identifier:="XUC"; font_size 10pt#;
20
21 u#:=20/36pt#; % unit width
22 if known cmbase:
23 width_adj#:=0pt#; % width adjustment for certain characters
24 serif_fit#:=0pt#; % extra sidebar near lowercase serifs
25 cap_serif_fit#:=5/36pt#; % extra sidebar near uppercase serifs
26 letter_fit#:=0pt#; % extra space added to all sidebars
27
28 body_height#:=270/36pt#; % height of tallest characters
29 asc_height#:=250/36pt#; % height of lowercase ascenders
30 cap_height#:=246/36pt#; % height of caps
31 fig_height#:=232/36pt#; % height of numeralsx_height#:=155/36pt#; % height of lowercase without ascenders
32 math_axis#:=90/36pt#; % axis of symmetry for math symbols
33 bar_height#:=87/36pt#; % height of crossbar in lowercase e
34 comma_depth#:=70/36pt#; % depth of comma below baseline
35 desc_depth#:=70/36pt#; % depth of lowercase descenders
36
37 crisp#:=0pt#; % diameter of serif corners
38 tiny#:=8/36pt#; % diameter of rounded corners
39 fine#:=7/36pt#; % diameter of sharply rounded corners
40 thin_join#:=7/36pt#; % width of extrafine details
41 hair#:=9/36pt#; % lowercase hairline breadth
42 stem#:=25/36pt#; % lowercase stem breadth
43 curve#:=30/36pt#; % lowercase curve breadth
44 ess#:=27/36pt#; % breadth in middle of lowercase s
45 flare#:=33/36pt#; % diameter of bulbs or breadth of terminals
46 dot_size#:=38/36pt#; % diameter of dots
47 cap_hair#:=11/36pt#; % uppercase hairline breadth
48 cap_stem#:=32/36pt#; % uppercase stem breadth
49 cap_curve#:=37/36pt#; % uppercase curve breadth
50 cap_ess#:=35/36pt#; % breadth in middle of uppercase s
51 rule_thickness#:=.4pt#; % thickness of lines in math symbols
52
53 dish#:=1/36pt#; % amount erased at top or bottom of serifs
54 bracket#:=20/36pt#; % vertical distance from serif base to tangent
55 jut#:=28/36pt#; % protrusion of lowercase serifs
56 cap_jut#:=37/36pt#; % protrusion of uppercase serifs
57 beak_jut#:=10/36pt#; % horizontal protrusion of beak serifs
58 beak#:=70/36pt#; % vertical protrusion of beak serifs
59 vair#:=8/36pt#; % vertical diameter of hairlines
60 notch_cut#:=10pt#; % maximum breadth above or below notches
61 bar#:=11/36pt#; % lowercase bar thickness
62 slab#:=11/36pt#; % serif and arm thickness
63 cap_bar#:=11/36pt#; % uppercase bar thickness
64 cap_band#:=11/36pt#; % uppercase thickness above/below lobes
65 cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches
66 serif_drop#:=4/36pt#; % vertical drop of sloped serifs
67 stem_corr#:=1/36pt#; % for small refinements of stem breadth
68 vair_corr#:=1/36pt#; % for small refinements of hairline height
69 apex_corr#:=0pt#; % extra width at diagonal junctions
70
71 o#:=8/36pt#; % amount of overshoot for curves
72 apex_o#:=8/36pt#; % amount of overshoot for diagonal junctions
73
74 slant:=0; % tilt ratio $(\Delta x/\Delta y)$
75 fudge:=1; % factor applied to weights of heavy characters
76 math_spread:=0; % extra openness of math symbols
77 superness:=1/sqrt2; % parameter for superellipses
78 superpull:=1/6; % extra openness inside bowls
79 beak_darkness:=11/30; % fraction of triangle inside beak serifs
80 ligs:=2; % level of ligatures to be included
81
82 square_dots:=false; % should dots be square?
83 hefty:=false; % should we try hard not to be overweight?
84 serifs:=true; % should serifs and bulbs be attached?
85 monospace:=false; % should all characters have the same width?
86 variant_g:=false; % should an italic-style g be used?
87 low_asterisk:=false; % should the asterisk be centered at the axis?
88 math_fitting:=false; % should math-mode spacing be used?
89 fi
90
91 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
92 % These are the real Xucuri Parameters
93 boolean mxcap;
94 %mxcap:=false; % No capitals
95
96 mxu#:= 2.5u#; % was 2.7u# % the unit, which where used to design this fonts
97 mxlittle#:= 3mxu#; % height of letters without ascenders
98 mxtop#:= 2mxu#; % the height of the ascenders
99 mxheight#:=mxtop#+mxlittle#;
100
101 mxhalf#:=mxu#; % Half width of the letter 'a'
102 mxone#:=2mxhalf#;
103 mxmiddle#:=2/3mxlittle#; % strokes not reaching the baseline, as in 'o'
104 mxthird#:=1/3mxlittle#;
105 mxfeet#:= .4mxhalf#; % The feet of 'i' and 'o' etc are slightly
106 % bent to the middle
107 mxlow#:= 1.8mxu#; %war 2mxu# % max depth below the baseline
108 %mxzw#:= .65mxu#; % Seperation of two letters
109 mxzw#:= 1.65mxu#; % Seperation of two letters
110
111 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
112 % Parameters for Xucuri Minuscles
113 xuclu#:=.8mxu#;
114 xucllittle#:= 3xuclu#; % height of letters without ascenders
115 xucltop#:= 2/3xucllittle#; % the height of the ascenders
116 xuclheight#:=xucltop#+xucllittle#;
117
118 xuclhalf#:=.9xuclu#; % Half width of the letter 'a'
119 xuclone#:=2xuclhalf#;
120 xuclmiddle#:=2/3xucllittle#; % strokes not reaching the baseline, as in 'o'
121 xuclthird#:=1/3xucllittle#;
122 xuclfeet#:= .4xuclhalf#; % The feet of 'i' and 'o' etc are slightly
123 % bent to the middle
124 xucllow#:= 2xuclu#; % max depth below the baseline
125 xuclzw#:= 1.65xuclu#; % Seperation of two letters
126
127
128 px1#:=.75mxu#; % pen 1 xscaling (Uppercase)
129 py1#:=.21mxu#; % pen 1 yscaling
130 px2#:=.65mxu#; % pen 2 xscaling (Lowercase)
131 py2#:=.15mxu#; % pen 2 yscaling
132
133 mxserifonset# := .4mxu#;
134 % mxserifonset# := 2py1#;
135 mxseriffoot# := .02mxu#;
136
137 dpx1#:=px1#; % digitpen xscaling
138 dpy1#:=py1#; % digitpen yscaling
139 pdot#:=.74mxu#; % pen for dots
140 pdash#:=.40mxu#; % pen for dashes
141 pcomma#:=.15mxu#; % pen for commas
142 slant:=0;
143
144 input xuc; % switch to the driver file
145 bye.