Debian Codegraph @

texmf-dist/fonts/source/public/gothic/yfrak.mf

raw
1 if unknown cmbase: input cmbase fi
2 input yfrabase; % -sl 15-3-1991
3
4 font_identifier:="yfrak"; font_size 10pt#;
5
6 u#:=20/36pt#; % unit width
7 lower_u#:=20/36pt#;
8 width_adj#:=0pt#; % width adjustment for certain characters
9 serif_fit#:=0pt#; % extra sidebar near lowercase serifs
10 cap_serif_fit#:=5/36pt#; % extra sidebar near uppercase serifs
11 letter_fit#:=0pt#; % extra space added to all sidebars
12
13 body_height#:=270/36pt#; % height of tallest characters
14 asc_height#:=250/36pt#; % height of lowercase ascenders
15 cap_height#:=246/36pt#; % height of caps
16 fig_height#:=232/36pt#; % height of numerals
17 x_height#:=167/36pt#; % height of lowercase without ascenders
18 %x_height#:=155/36pt#; % height of lowercase without ascenders
19 math_axis#:=90/36pt#; % axis of symmetry for math symbols
20 bar_height#:=87/36pt#; % height of crossbar in lowercase e
21 comma_depth#:=70/36pt#; % depth of comma below baseline
22 desc_depth#:=70/36pt#; % depth of lowercase descenders
23
24 crisp#:=0pt#; % diameter of serif corners
25 tiny#:=8/36pt#; % diameter of rounded corners
26 fine#:=7/36pt#; % diameter of sharply rounded corners
27 thin_join#:=7/36pt#; % width of extrafine details
28 hair#:=7/36pt#; % lowercase hairline breadth
29 %hair#:=9/36pt#; % lowercase hairline breadth
30 %stem#:=25/36pt#; % lowercase stem breadth
31 stem#:=24/36pt#; % lowercase stem breadth
32 curve#:=30/36pt#; % lowercase curve breadth
33 ess#:=27/36pt#; % breadth in middle of lowercase s
34 flare#:=33/36pt#; % diameter of bulbs or breadth of terminals
35 dot_size#:=38/36pt#; % diameter of dots
36 %cap_hair#:=11/36pt#; % uppercase hairline breadth
37 cap_hair#:=8/36pt#;
38 cap_amount#:=8/36pt#;
39 %cap_stem#:=32/36pt#; % uppercase stem breadth
40 cap_stem#:=32/36pt#;
41 cap_curve#:=37/36pt#; % uppercase curve breadth
42 cap_ess#:=35/36pt#; % breadth in middle of uppercase s
43 rule_thickness#:=.4pt#; % thickness of lines in math symbols
44
45 dish#:=1/36pt#; % amount erased at top or bottom of serifs
46 bracket#:=20/36pt#; % vertical distance from serif base to tangent
47 jut#:=28/36pt#; % protrusion of lowercase serifs
48 cap_jut#:=37/36pt#; % protrusion of uppercase serifs
49 beak_jut#:=10/36pt#; % horizontal protrusion of beak serifs
50 beak#:=70/36pt#; % vertical protrusion of beak serifs
51 vair#:=8/36pt#; % vertical diameter of hairlines
52 notch_cut#:=10pt#; % maximum breadth above or below notches
53 bar#:=11/36pt#; % lowercase bar thickness
54 slab#:=11/36pt#; % serif and arm thickness
55 cap_bar#:=11/36pt#; % uppercase bar thickness
56 cap_band#:=11/36pt#; % uppercase thickness above/below lobes
57 cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches
58 serif_drop#:=4/36pt#; % vertical drop of sloped serifs
59 stem_corr#:=1/36pt#; % for small refinements of stem breadth
60 vair_corr#:=1/36pt#; % for small refinements of hairline height
61 apex_corr#:=0pt#; % extra width at diagonal junctions
62
63 o#:=8/36pt#; % amount of overshoot for curves
64 apex_o#:=5/36pt#; % amount of overshoot for diagonal junctions
65
66 slant:=0; % tilt ratio $(\Delta x/\Delta y)$
67 fudge:=1; % factor applied to weights of heavy characters
68 math_spread:=0; % extra openness of math symbols
69 superness:=1/sqrt2; % parameter for superellipses
70 superpull:=1/6; % extra openness inside bowls
71 beak_darkness:=11/30; % fraction of triangle inside beak serifs
72 ligs:=2; % level of ligatures to be included
73
74 square_dots:=false; % should dots be square?
75 hefty:=false; % should we try hard not to be overweight?
76 serifs:=true; % should serifs and bulbs be attached?
77 monospace:=false; % should all characters have the same width?
78 variant_g:=false; % should an italic-style g be used?
79 low_asterisk:=false; % should the asterisk be centered at the axis?
80 math_fitting:=false; % should math-mode spacing be used?
81 numeric usual_right, usual_left;
82 usual_right#:=0.5u#;
83 usual_left#:=0.3u#;
84
85 granularity:=1.01;
86 %aspect_ratio:=2/3aspect_ratio;
87
88 mode_setup;
89 font_setup;
90 cap_amount:=8/36pt;
91 foot:=0.207x_height;
92 num_height:=1.242x_height;
93 cap_kern:=4/36pt;
94 boolean ligature; ligature:=false;
95 numeric alpha; alpha:=0;
96 numeric coef, gencoef; gencoef:=1;
97
98 %granularity:=1.01;
99
100 %readfrom("yfrakbase"); % -sl 15-3-1991
101 %currenttransform:=identity xscaled 1.1;
102 if proofing>1: generate ycurrent; fi % switch to the driver file%
103 %generate yfrakmisc;
104 generate yfrakmis; % -sl 15-3-1991
105 %generate yfraklower;
106 generate yfraklow; % -sl 15-3-1991
107 %generate yfrakupper; % switch to the driver file
108 generate yfrakupp; % -sl 15-3-1991
109 generate yfraknum;
110 %currenttransform:=identity;
111 %generate yfrakother;
112 generate yfrakoth; % -sl 15-3-1991
113
114 font_slant slant; font_x_height x_height#;
115 font_normal_space 6u#+2letter_fit#;
116 font_normal_stretch 3u#; font_normal_shrink 2u#;
117 font_quad 18u#+4letter_fit#;
118 font_extra_space 2u#;
119
120 %ligtable "a": "e"=:oct"032";
121 ligtable "c": "h"=:oct"205", "k"=:oct"206";
122 ligtable "f": "f"=:oct"204";
123 ligtable "s": ":"=:oct"215", "s"=:oct"201", "t"=:oct"202", "z"=:oct"032",
124 "f"=:oct"203", "b" kern 1.03u#, "d" kern 1.03u#, "h" kern 1.03u#, "k" kern 1.03u#,
125 "l" kern 1.03u#, "i" kern 0.4u#, "j" kern 0.4u#;
126 ligtable "t": "z"=:oct"213";
127 ligtable oct"042": "a"=:oct"212", "e"=:oct"221", "o"=:oct"232", "u"=:oct"237",
128 "s"=:oct"032";
129 ligtable "*": "a"=:oct"211", "e"=:oct"220", "o"=:oct"231", "u"=:oct"236";
130 ligtable "`": "`"=:oct"134";
131 ligtable "'": "'"=:oct"042";
132 ligtable "-": "-"=:oct"173";
133 ligtable oct"173": "-"=:oct"174";
134 ligtable oct"201": "b" kern 1.03u#, "d" kern 1.03u#, "h" kern 1.03u#, "k" kern 1.03u#
135 , "l" kern 1.03u#, "i" kern 0.4u#, "j" kern 0.4u#;
136
137 end.