Debian Codegraph @

texmf-dist/fonts/source/public/esvect/vect5.mf

raw
1 %%
2 %% This is file `vect5.mf',
3 %% generated with the docstrip utility.
4 %%
5 %% The original source files were:
6 %%
7 %% esvect.dtx (with options: `mffilea')
8 %%
9 %% esvect package to typeset vectors.
10 %%
11 %% See also http://perso.wanadoo.fr/eddie.saudrais (in french)
12 %%
13 %% Run LaTeX on escevt.ins to generate files.
14 %%
15 %% Install the files:
16 %%
17 %% -- esvect.sty and uesvect.fd on TEXINPUT;
18 %% -- vect5.mf, vect6.mf, vect7.mf, vect8.mf, vect9.mf, vect10.mf on
19 %% MFINPUT;
20 %% -- generate tfm files running METAFONT on *.mf files, and put
21 %% *.tfm files on the right location.
22 %%
23 %% Run LaTeX on esvect.dtx to generate
24 %% documentation.
25 %%
26 if unknown cmbase: input cmbase fi
27
28 font_identifier:="VECT"; font_size 5pt#;
29
30 u#:=12.5/36pt#; % unit width
31 width_adj#:=0pt#; % width adjustment for certain characters
32 serif_fit#:=0pt#; % extra sidebar near lowercase serifs
33 cap_serif_fit#:=2/36pt#; % extra sidebar near uppercase serifs
34 letter_fit#:=10/36pt#; % extra space added to all sidebars
35
36 body_height#:=135/36pt#; % height of tallest characters
37 asc_height#:=125/36pt#; % height of lowercase ascenders
38 cap_height#:=123/36pt#; % height of caps
39 fig_height#:=116/36pt#; % height of numerals
40 x_height#:=77.5/36pt#; % height of lowercase without ascenders
41 math_axis#:=45/36pt#; % axis of symmetry for math symbols
42 bar_height#:=43.5/36pt#; % height of crossbar in lowercase e
43 comma_depth#:=35/36pt#; % depth of comma below baseline
44 desc_depth#:=35/36pt#; % depth of lowercase descenders
45
46 crisp#:=6/36pt#; % diameter of serif corners
47 tiny#:=6/36pt#; % diameter of rounded corners
48 fine#:=5/36pt#; % diameter of sharply rounded corners
49 thin_join#:=5/36pt#; % width of extrafine details
50 hair#:=7.5/36pt#; % lowercase hairline breadth
51 stem#:=15.5/36pt#; % lowercase stem breadth
52 curve#:=17.5/36pt#; % lowercase curve breadth
53 ess#:=12/36pt#; % breadth in middle of lowercase s
54 flare#:=18.5/36pt#; % diameter of bulbs or breadth of terminals
55 dot_size#:=22/36pt#; % diameter of dots
56 cap_hair#:=8/36pt#; % uppercase hairline breadth
57 cap_stem#:=18.5/36pt#; % uppercase stem breadth
58 cap_curve#:=20.5/36pt#; % uppercase curve breadth
59 cap_ess#:=13.5/36pt#; % breadth in middle of uppercase s
60 rule_thickness#:=.28pt#; % thickness of lines in math symbols
61
62 dish#:=.7/36pt#; % amount erased at top or bottom of serifs
63 bracket#:=10/36pt#; % vertical distance from serif base to tangent
64 jut#:=17/36pt#; % protrusion of lowercase serifs
65 cap_jut#:=20/36pt#; % protrusion of uppercase serifs
66 beak_jut#:=6/36pt#; % horizontal protrusion of beak serifs
67 beak#:=35/36pt#; % vertical protrusion of beak serifs
68 vair#:=6/36pt#; % vertical diameter of hairlines
69 notch_cut#:=5pt#; % maximum breadth above or below notches
70 bar#:=8/36pt#; % lowercase bar thickness
71 slab#:=8/36pt#; % serif and arm thickness
72 cap_bar#:=8/36pt#; % uppercase bar thickness
73 cap_band#:=8/36pt#; % uppercase thickness above/below lobes
74 cap_notch_cut#:=5pt#; % max breadth above/below uppercase notches
75 serif_drop#:=2/36pt#; % vertical drop of sloped serifs
76 stem_corr#:=.7/36pt#; % for small refinements of stem breadth
77 vair_corr#:=.5/36pt#; % for small refinements of hairline height
78 apex_corr#:=0pt#; % extra width at diagonal junctions
79
80 o#:=4/36pt#; % amount of overshoot for curves
81 apex_o#:=4/36pt#; % amount of overshoot for diagonal junctions
82
83 slant:=.25; % tilt ratio $(\Delta x/\Delta y)$
84 fudge:=1; % factor applied to weights of heavy characters
85 math_spread:=1; % extra openness of math symbols
86 superness:=1/sqrt2; % parameter for superellipses
87 superpull:=1/6; % extra openness inside bowls
88 beak_darkness:=11/30; % fraction of triangle inside beak serifs
89 ligs:=1; % level of ligatures to be included
90
91 square_dots:=false; % should dots be square?
92 hefty:=false; % should we try hard not to be overweight?
93 serifs:=true; % should serifs and bulbs be attached?
94 monospace:=false; % should all characters have the same width?
95 variant_g:=true; % should an italic-style g be used?
96 low_asterisk:=false; % should the asterisk be centered at the axis?
97 math_fitting:=true; % should math-mode spacing be used?
98
99 subs:=5/5; % subscripts to 5pt will normally be in 5pt type
100 rth#:=.4pt#; % assume that rules will come from cmex10
101 fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
102 math_axis#+3.51rth#+36/36pt#+subs*desc_depth#, % num1
103 math_axis#+1.51rth#+3/36pt#, % num2
104 math_axis#+1.51rth#+24/36pt#, % num3
105 -(math_axis#-3.51rth#-subs*fig_height#-63/36pt#), % denom1
106 -(math_axis#-1.51rth#-subs*fig_height#-3/36pt#), % denom2
107 5.99pt#-subs*asc_height#, % sup1
108 5.49pt#-subs*asc_height#, % sup2
109 53/36pt#, % sup3
110 36/36pt#, % sub1
111 72/36pt#, % sub2
112 subs*asc_height#-36/36pt#, % sup\_drop
113 18/36pt#, % sub\_drop
114 9.9pt#, % delim1
115 7.1pt#, % delim2
116 math_axis#; % axis\_height
117
118 generate mathvec % switch to the driver file
119 \endinput
120 %%
121 %% End of file `vect5.mf'.