Debian Codegraph @

texmf-dist/fonts/source/public/esrelation/esrelation10.mf

raw
1 %%
2 %% This is file `esrelation10.mf',
3 %% generated with the docstrip utility.
4 %%
5 %% The original source files were:
6 %%
7 %% esrelation.dtx (with options: `mf10')
8 %%
9 %% Copyright (C) 2015
10 %% by Byron Cook, Tauba Auerbach, and David Reinfurt
11 %%
12 %% This work may be distributed and/or modified under the conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is [here](http://www.latex-project.org/lppl.txt) and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later.
13 %%
14 if unknown cmbase: input cmbase fi
15
16 font_identifier:="VECT";
17 font_size 10pt#;
18
19 %% relation specific measures
20
21 em# := 10pt#; % ``M'' width
22 cap# := 7pt#; % cap height
23 sb# := 1/4pt#; % sidebearing
24 o# := 1/16pt#; % amt curves overshoot borders
25 penscaler# := 0.3pt#; % pen stroke scaler ** fix **
26
27 %% relation non-sharped values * fix *
28
29 %% u = (w-(2*sb))/8; % utility measurement
30 %% super = 3.9; % offset utility for curve roundness [2.8]
31
32 %% cm values from esvect
33
34 u#:=20/36pt#; % unit width
35 width_adj#:=0pt#; % width adjustment for certain characters
36 serif_fit#:=0pt#; % extra sidebar near lowercase serifs
37 cap_serif_fit#:=5/36pt#; % extra sidebar near uppercase serifs
38 letter_fit#:=0pt#; % extra space added to all sidebars
39
40 body_height#:=270/36pt#; % height of tallest characters
41 asc_height#:=250/36pt#; % height of lowercase ascenders
42 cap_height#:=246/36pt#; % height of caps
43 fig_height#:=232/36pt#; % height of numerals
44 x_height#:=155/36pt#; % height of lowercase without ascenders
45 math_axis#:=90/36pt#; % axis of symmetry for math symbols
46 bar_height#:=87/36pt#; % height of crossbar in lowercase e
47 comma_depth#:=70/36pt#; % depth of comma below baseline
48 desc_depth#:=70/36pt#; % depth of lowercase descenders
49
50 crisp#:=8/36pt#; % diameter of serif corners
51 tiny#:=8/36pt#; % diameter of rounded corners
52 fine#:=7/36pt#; % diameter of sharply rounded corners
53 thin_join#:=7/36pt#; % width of extrafine details
54 hair#:=9/36pt#; % lowercase hairline breadth
55 stem#:=24/36pt#; % lowercase stem breadth
56 curve#:=29/36pt#; % lowercase curve breadth
57 ess#:=27/36pt#; % breadth in middle of lowercase s
58 flare#:=32/36pt#; % diameter of bulbs or breadth of terminals
59 dot_size#:=38/36pt#; % diameter of dots
60 cap_hair#:=11/36pt#; % uppercase hairline breadth
61 cap_stem#:=30/36pt#; % uppercase stem breadth
62 cap_curve#:=35/36pt#; % uppercase curve breadth
63 cap_ess#:=33/36pt#; % breadth in middle of uppercase s
64 rule_thickness#:=.4pt#; % thickness of lines in math symbols
65
66 dish#:=1/36pt#; % amount erased at top or bottom of serifs
67 bracket#:=20/36pt#; % vertical distance from serif base to tangent
68 jut#:=30/36pt#; % protrusion of lowercase serifs
69 cap_jut#:=37/36pt#; % protrusion of uppercase serifs
70 beak_jut#:=10/36pt#; % horizontal protrusion of beak serifs
71 beak#:=70/36pt#; % vertical protrusion of beak serifs
72 vair#:=8/36pt#; % vertical diameter of hairlines
73 notch_cut#:=10pt#; % maximum breadth above or below notches
74 bar#:=11/36pt#; % lowercase bar thickness
75 slab#:=11/36pt#; % serif and arm thickness
76 cap_bar#:=11/36pt#; % uppercase bar thickness
77 cap_band#:=11/36pt#; % uppercase thickness above/below lobes
78 cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches
79 serif_drop#:=4/36pt#; % vertical drop of sloped serifs
80 stem_corr#:=1/36pt#; % for small refinements of stem breadth
81 vair_corr#:=1/36pt#; % for small refinements of hairline height
82 apex_corr#:=0pt#; % extra width at diagonal junctions
83
84 %% o#:=8/36pt#; % amount of overshoot for curves
85 apex_o#:=8/36pt#; % amount of overshoot for diagonal junctions
86
87 slant:=.25; % tilt ratio $(\Delta x/\Delta y)$
88 fudge:=1; % factor applied to weights of heavy characters
89 math_spread:=0; % extra openness of math symbols
90 superness:=1/sqrt2; % parameter for superellipses
91 superpull:=1/6; % extra openness inside bowls
92 beak_darkness:=11/30; % fraction of triangle inside beak serifs
93 ligs:=2; % level of ligatures to be included
94
95 square_dots:=false; % should dots be square?
96 hefty:=false; % should we try hard not to be overweight?
97 serifs:=true; % should serifs and bulbs be attached?
98 monospace:=false; % should all characters have the same width?
99 variant_g:=true; % should an italic-style g be used?
100 low_asterisk:=false; % should the asterisk be centered at the axis?
101 math_fitting:=true; % should math-mode spacing be used?
102
103 subs:=7/10; % subscripts to 10pt will normally be in 7pt type
104 rth#:=.4pt#; % assume that rules will come from cmex10
105 fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
106 math_axis#+3.51rth#+54/36pt#+subs*desc_depth#, % num1
107 math_axis#+1.51rth#+30/36pt#, % num2
108 math_axis#+1.51rth#+48/36pt#, % num3
109 -(math_axis#-3.51rth#-subs*fig_height#-124/36pt#), % denom1
110 -(math_axis#-1.51rth#-subs*fig_height#-30/36pt#), % denom2
111 8.99pt#-subs*asc_height#, % sup1
112 8.49pt#-subs*asc_height#, % sup2
113 104/36pt#, % sup3
114 54/36pt#, % sub1
115 -(8.49pt#-2subs*asc_height#-3.1rth#), % sub2
116 subs*asc_height#-36/36pt#, % sup\_drop
117 18/36pt#, % sub\_drop
118 23.9pt#, % delim1
119 10.1pt#, % delim2
120 math_axis#; % axis\_height
121
122 generate esrelation % switch to the driver file
123
124 \endinput
125 %%
126 %% End of file `esrelation10.mf'.