Debian Codegraph @

texmf-dist/fonts/source/public/concmath-fonts/xccam9.mf

raw
1 % Concrete version of msam9, the first extra symbol font in AMSFonts 2.x.
2 % [ heavily borrowed from D. E. Knuth ]
3
4 % Copyright (C) 1995--1999 Ulrik Vieth
5 %
6 % This file is part of the `concmath' package.
7 %
8 % This program is free software; you can redistribute it and/or
9 % modify it under the terms of the LaTeX Project Public License
10 % as described in lppl.txt in the base LaTeX distribution; either
11 % version 1 of the License, or (at your option) any later version.
12
13 if unknown cmbase: input cmbase fi
14
15 font_identifier:="CCAM"; font_size 9pt#;
16
17 u#:=18.5/36pt#; % unit width
18 width_adj#:=0pt#; % width adjustment for certain characters
19 serif_fit#:=1/36pt#; % extra sidebar near lowercase serifs
20 cap_serif_fit#:=2.8/36pt#; % extra sidebar near uppercase serifs
21 letter_fit#:=0pt#; % extra space added to all sidebars
22
23 body_height#:=243/36pt#; % height of tallest characters
24 asc_height#:=225/36pt#; % height of lowercase ascenders
25 cap_height#:=221.4/36pt#; % height of caps
26 fig_height#:=208.8/36pt#; % height of numerals
27 x_height#:=148.5/36pt#; % height of lowercase without ascenders
28 math_axis#:=81/36pt#; % axis of symmetry for math symbols
29 bar_height#:=78.3/36pt#; % height of crossbar in lowercase e
30 comma_depth#:=63/36pt#; % depth of comma below baseline
31 desc_depth#:=63/36pt#; % depth of lowercase descenders
32
33 crisp#:=0pt#; % diameter of serif corners
34 tiny#:=10/36pt#; % diameter of rounded corners
35 fine#:=6/36pt#; % diameter of sharply rounded corners
36 thin_join#:=17/36pt#; % width of extrafine details
37 hair#:=20/36pt#; % lowercase hairline breadth
38 stem#:=24/36pt#; % lowercase stem breadth
39 curve#:=26/36pt#; % lowercase curve breadth
40 ess#:=24/36pt#; % breadth in middle of lowercase s
41 flare#:=26/36pt#; % diameter of bulbs or breadth of terminals
42 dot_size#:=35/36pt#; % diameter of dots
43 cap_hair#:=20/36pt#; % uppercase hairline breadth
44 cap_stem#:=26/36pt#; % uppercase stem breadth
45 cap_curve#:=27/36pt#; % uppercase curve breadth
46 cap_ess#:=24/36pt#; % breadth in middle of uppercase s
47 rule_thickness#:=.38pt#; % thickness of lines in math symbols
48
49 dish#:=0/36pt#; % amount erased at top or bottom of serifs
50 bracket#:=5/36pt#; % vertical distance from serif base to tangent
51 jut#:=27/36pt#; % protrusion of lowercase serifs
52 cap_jut#:=29/36pt#; % protrusion of uppercase serifs
53 beak_jut#:=9.2/36pt#; % horizontal protrusion of beak serifs
54 beak#:=63/36pt#; % vertical protrusion of beak serifs
55 vair#:=20/36pt#; % vertical diameter of hairlines
56 notch_cut#:=27/36pt#; % maximum breadth above or below notches
57 bar#:=20/36pt#; % lowercase bar thickness
58 slab#:=20/36pt#; % serif and arm thickness
59 cap_bar#:=20/36pt#; % uppercase bar thickness
60 cap_band#:=20/36pt#; % uppercase thickness above/below lobes
61 cap_notch_cut#:=.9pt#; % max breadth above/below uppercase notches
62 serif_drop#:=3.6/36pt#; % vertical drop of sloped serifs
63 stem_corr#:=1/36pt#; % for small refinements of stem breadth
64 vair_corr#:=1/36pt#; % for small refinements of hairline height
65 apex_corr#:=0pt#; % extra width at diagonal junctions
66
67 o#:=4/36pt#; % amount of overshoot for curves
68 apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions
69
70 slant:=.25; % tilt ratio $(\Delta x/\Delta y)$
71 fudge:=.95; % factor applied to weights of heavy characters
72 math_spread:=.2; % extra openness of math symbols
73 superness:=8/11; % parameter for superellipses
74 superpull:=1/15; % extra openness inside bowls
75 beak_darkness:=4/30; % fraction of triangle inside beak serifs
76 ligs:=2; % level of ligatures to be included
77
78 square_dots:=false; % should dots be square?
79 hefty:=false; % should we try hard not to be overweight?
80 serifs:=true; % should serifs and bulbs be attached?
81 monospace:=false; % should all characters have the same width?
82 variant_g:=true; % should an italic-style g be used?
83 low_asterisk:=false; % should the asterisk be centered at the axis?
84 math_fitting:=true; % should math-mode spacing be used?
85
86 % include these parameters to shrink R and S so they fit inside a circle
87 % (parameters taken from msam9 without further tuning for Concrete)
88
89 lower.u#:=14.5/36pt#; % unit width
90 lower.width_adj#:=0pt#; % width adjustment for certain characters
91 lower.cap_serif_fit#:=3.4/36pt#;% extra sidebar near uppercase serifs
92 lower.letter_fit#:=3.5/36pt#; % extra space added to all sidebars
93
94 lower.body_height#:=173/36pt#; % height of tallest characters
95 lower.cap_height#:=170.4/36pt#; % height of caps
96 lower.x_height#:=100.5/36pt#; % height of lowercase without ascenders
97 lower.bar_height#:=56.3/36pt#; % height of crossbar in lowercase e
98 lower.comma_depth#:=45/36pt#; % depth of comma below baseline
99
100 lower.flare#:=22/36pt#; % diameter of bulbs or breadth of terminals
101 lower.cap_hair#:=8.6/36pt#; % uppercase hairline breadth
102 lower.stem#:=19/36pt#; % lowercase stem breadth
103 lower.cap_stem#:=23.5/36pt#; % uppercase stem breadth
104 lower.cap_curve#:=28/36pt#; % uppercase curve breadth
105 lower.cap_ess#:=24/36pt#; % breadth in middle of uppercase s
106
107 lower.cap_jut#:=23/36pt#; % protrusion of uppercase serifs
108 lower.beak_jut#:=6.2/36pt#; % horizontal protrusion of beak serifs
109 lower.beak#:=45/36pt#; % vertical protrusion of beak serifs
110 lower.slab#:=8.6/36pt#; % serif and arm thickness
111 lower.cap_bar#:=8.6/36pt#; % uppercase bar thickness
112 lower.cap_band#:=8.6/36pt#; % uppercase thickness above/below lobes
113 lower.cap_notch_cut#:=9pt#; % max breadth above/below uppercase notches
114
115 lower.o#:=4.5/36pt#; % amount of overshoot for curves
116 lower.apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions
117
118 lower.fudge:=1; % factor applied to weights of heavy characters
119
120 % the following font parameters are explained in {\sl The \TeX book}, Appendix G
121 subs:=6/9; % subscripts to 9pt will normally be in 6pt type
122 rth#:=.4pt#; % assume that rules will come from cmex10
123 fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
124 math_axis#+3.51rth#+36/36pt#+subs*desc_depth#, % num1
125 math_axis#+1.51rth#+30/36pt#, % num2
126 math_axis#+1.51rth#+43/36pt#, % num3
127 -(math_axis#-3.51rth#-subs*fig_height#-111/36pt#), % denom1
128 -(math_axis#-1.51rth#-subs*fig_height#-30/36pt#), % denom2
129 8.49pt#-subs*asc_height#, % sup1
130 7.99pt#-subs*asc_height#, % sup2
131 93/36pt#, % sup3
132 36/36pt#, % sub1
133 -(7.99pt#-2subs*asc_height#-3.1rth#), % sub2
134 subs*asc_height#-36/36pt#, % sup\_drop
135 18/36pt#, % sub\_drop
136 23.9pt#, % delim1
137 9.1pt#, % delim2
138 math_axis#; % axis\_height
139
140 generate amsya % switch to the driver file