| 1 |
\section{Controlling Bounding Box} |
| 2 |
From the \tkzimp{PgfManual} : |
| 3 |
|
| 4 |
"When you add the clip option, the current path is used for clipping subsequent drawings. Clipping never enlarges the clipping area. Thus, when you clip against a certain path and then clip again against another path, you clip against the intersection of both. |
| 5 |
The only way to enlarge the clipping path is to end the {pgfscope} in which the clipping was done. At the end of a {pgfscope} the clipping path that was in force at the beginning of the scope is reinstalled." |
| 6 |
|
| 7 |
|
| 8 |
First of all, you don't have to deal with \TIKZ\ the size of the bounding box. Early versions of \tkzNamePack{tkz-euclide} did not control the size of the bounding box, now with \tkzNamePack{\tkznameofpack} 4 the size of the bounding box is limited. |
| 9 |
|
| 10 |
The initial bounding box after using the macro \tkzcname{tkzInit} is defined by the rectangle based on the points $(0,0)$ and $(10,10)$. The \tkzcname{tkzInit} macro allows this initial bounding box to be modified using the arguments (\tkzname{xmin}, \tkzname{xmax}, \tkzname{ymin}, and \tkzname{ymax}). Of course any external trace modifies the bounding box. \TIKZ\ maintains that bounding box. It is possible to influence this behavior either directly with commands or options in \TIKZ\ such as a command like \tkzcname{useasboundingbox} or the option \tkzname{use as bounding box}. A possible consequence is to reserve a box for a figure but the figure may overflow the box and spread over the main text. |
| 11 |
The following command \tkzcname{pgfresetboundingbox} clears a bounding box and establishes a new one. |
| 12 |
|
| 13 |
\subsection{Utility of \tkzcname{tkzInit}} |
| 14 |
However, it is sometimes necessary to control the size of what will be displayed. |
| 15 |
To do this, you need to have prepared the bounding box you are going to work in, this is the role of the macro \tkzNameMacro{tkzInit}. For some drawings, it is interesting to fix the extreme values (xmin,xmax,ymin and ymax) and to \code{clip} the definition rectangle in order to control the size of the figure as well as possible. |
| 16 |
|
| 17 |
The two macros that are useful for controlling the bounding box: |
| 18 |
\begin{itemize} |
| 19 |
\item \tkzcname{tkzInit} |
| 20 |
\item \tkzcname{tkzClip} |
| 21 |
\end{itemize} |
| 22 |
\vspace{20pt} |
| 23 |
|
| 24 |
To this, I added macros directly linked to the bounding box. You can now view it, backup it, restore it (see the section Bounding Box). |
| 25 |
|
| 26 |
\subsection{\tkzcname{tkzInit}} |
| 27 |
|
| 28 |
\begin{NewMacroBox}{tkzInit}{\oarg{local options}}\hypertarget{init}{}% |
| 29 |
\begin{tabular}{lll}% |
| 30 |
options & default & definition \\ |
| 31 |
\midrule |
| 32 |
\TOline{xmin} {0} {minimum value of the abscissae in cm} |
| 33 |
\TOline{xmax} {10} {maximum value of the abscissae in cm} |
| 34 |
\TOline{xstep}{1} {difference between two graduations in $x$} |
| 35 |
\TOline{ymin} {0} {minimum y-axis value in cm } |
| 36 |
\TOline{ymax} {10} {maximum y-axis value in cm} |
| 37 |
\TOline{ystep}{1} {difference between two graduations in $y$} |
| 38 |
\bottomrule |
| 39 |
\end{tabular} |
| 40 |
|
| 41 |
\medskip |
| 42 |
|
| 43 |
The role of \tkzcname{tkzInit} is to define a \textcolor{red}{orthogonal} coordinates system and a rectangular part of the plane in which you will place your drawings using Cartesian coordinates. |
| 44 |
This macro allows you to define your working environment as with a calculator. With \tkzname{\tkznameofpack} 4 \tkzcname{xstep} and \tkzcname{ystep} are always 1. Logically it is no longer useful to use \tkzcname{tkzInit}, except for an action like \code{Clipping Out}. |
| 45 |
\end{NewMacroBox} |
| 46 |
|
| 47 |
|
| 48 |
\subsection{\tkzcname{tkzClip}} |
| 49 |
|
| 50 |
\begin{NewMacroBox}{tkzClip}{\oarg{local options}} |
| 51 |
The role of this macro is to make invisible what is outside the rectangle defined by (xmin~;~ymin) and (xmax~;~ymax). |
| 52 |
|
| 53 |
\medskip |
| 54 |
\begin{tabular}{lll} |
| 55 |
\hline |
| 56 |
options & default & definition \\ |
| 57 |
\midrule |
| 58 |
\TOline{space} {1} {added value on the right, left, bottom and top of the background} |
| 59 |
\bottomrule |
| 60 |
\end{tabular} |
| 61 |
|
| 62 |
\medskip |
| 63 |
|
| 64 |
The role of the \tkzname{space} option is to enlarge the visible part of the drawing. This part becomes the rectangle defined by (xmin-space~;~ymin-space) and (xmax+space~;~ymax+space). \tkzname{space} can be negative! The unit is cm and should not be specified. |
| 65 |
\end{NewMacroBox} |
| 66 |
|
| 67 |
|
| 68 |
|
| 69 |
The role of this macro is to \code{clip} the initial rectangle so that only the paths contained in this rectangle are drawn. |
| 70 |
|
| 71 |
\begin{tkzexample}[latex=8cm,small] |
| 72 |
\begin{tikzpicture} |
| 73 |
\tkzInit[xmax=4, ymax=3] |
| 74 |
\tkzDefPoints{-1/-1/A,5/2/B} |
| 75 |
\tkzDrawX \tkzDrawY |
| 76 |
\tkzGrid |
| 77 |
\tkzClip |
| 78 |
\tkzDrawSegment(A,B) |
| 79 |
\end{tikzpicture} |
| 80 |
\end{tkzexample} |
| 81 |
|
| 82 |
It is possible to add a bit of space |
| 83 |
\begin{tkzltxexample}[] |
| 84 |
\tkzClip[space=1] |
| 85 |
\end{tkzltxexample} |
| 86 |
|
| 87 |
\subsection{\tkzcname{tkzClip} and the option \tkzname{space}} |
| 88 |
This option allows you to add some space around the \code{clipped} rectangle. |
| 89 |
\begin{tkzexample}[latex=8cm,small] |
| 90 |
\begin{tikzpicture} |
| 91 |
\tkzInit[xmax=4, ymax=3] |
| 92 |
\tkzDefPoints{-1/-1/A,5/2/B} |
| 93 |
\tkzDrawX \tkzDrawY |
| 94 |
\tkzGrid |
| 95 |
\tkzClip[space=1] |
| 96 |
\tkzDrawSegment(A,B) |
| 97 |
\end{tikzpicture} |
| 98 |
\end{tkzexample} |
| 99 |
The dimensions of the \code{clipped} rectangle are \tkzname{xmin-1}, \tkzname{ymin-1}, \tkzname{xmax+1} and \tkzname{ymax+1}. |
| 100 |
|
| 101 |
%<---------------------------------------------------------------------------> |
| 102 |
% tkzShowBB |
| 103 |
%<---------------------------------------------------------------------------> |
| 104 |
\subsection{tkzShowBB} |
| 105 |
The simplest macro. |
| 106 |
\begin{NewMacroBox}{tkzShowBB}{\oarg{local options}}% |
| 107 |
This macro displays the bounding box. A rectangular frame surrounds the bounding box. This macro accepts \TIKZ\ options. |
| 108 |
\end{NewMacroBox} |
| 109 |
|
| 110 |
|
| 111 |
\subsubsection{Example with \tkzcname{tkzShowBB}} |
| 112 |
\begin{tkzexample}[latex=8cm,small] |
| 113 |
\begin{tikzpicture}[scale=.5] |
| 114 |
\tkzInit[ymax=5,xmax=8] |
| 115 |
\tkzGrid |
| 116 |
\tkzDefPoint(3,0){A} |
| 117 |
\begin{scope} |
| 118 |
\tkzClipBB |
| 119 |
\tkzDefCircle[R](A,5) \tkzGetPoint{a} |
| 120 |
\tkzDrawCircle(A,a) |
| 121 |
\tkzShowBB[line width = 4pt,fill=teal!10,% |
| 122 |
opacity=.4] |
| 123 |
\end{scope} |
| 124 |
\tkzDefCircle[R](A,4) \tkzGetPoint{b} |
| 125 |
\tkzDrawCircle[red](A,b) |
| 126 |
\end{tikzpicture} |
| 127 |
\end{tkzexample} |
| 128 |
%<---------------------------------------------------------------------------> |
| 129 |
% tkzClipBB |
| 130 |
%<---------------------------------------------------------------------------> |
| 131 |
\subsection{tkzClipBB} |
| 132 |
\begin{NewMacroBox}{tkzClipBB}{}% |
| 133 |
The idea is to limit future constructions to the current bounding box. |
| 134 |
\end{NewMacroBox} |
| 135 |
|
| 136 |
\subsubsection{Example with \tkzcname{tkzClipBB} and the bisectors} |
| 137 |
|
| 138 |
\begin{tkzexample}[latex=6cm,small] |
| 139 |
\begin{tikzpicture} |
| 140 |
\tkzInit[xmin=-3,xmax=6, ymin=-1,ymax=6] |
| 141 |
\tkzDefPoint(0,0){O}\tkzDefPoint(3,1){I} |
| 142 |
\tkzDefPoint(1,4){J} |
| 143 |
\tkzDefLine[bisector](I,O,J) \tkzGetPoint{i} |
| 144 |
\tkzDefLine[bisector out](I,O,J) \tkzGetPoint{j} |
| 145 |
\tkzDrawPoints(O,I,J,i,j) |
| 146 |
\tkzClipBB |
| 147 |
\tkzDrawLines[add = 1 and 2,color=orange](O,I O,J) |
| 148 |
\tkzDrawLines[add = 1 and 2](O,i O,j) |
| 149 |
\tkzShowBB |
| 150 |
\end{tikzpicture} |
| 151 |
\end{tkzexample} |
| 152 |
|
| 153 |
|
| 154 |
\newpage |
| 155 |
|
| 156 |
\section{Clipping different objects} |
| 157 |
|
| 158 |
\subsection{Clipping a polygon} |
| 159 |
\begin{NewMacroBox}{tkzClipPolygon}{\oarg{local options}\parg{points list}}% |
| 160 |
This macro makes it possible to contain the different plots in the designated polygon. |
| 161 |
|
| 162 |
\medskip |
| 163 |
\begin{tabular}{lll}% |
| 164 |
\toprule |
| 165 |
arguments & example & explanation \\ |
| 166 |
\midrule |
| 167 |
\TAline{\parg{pt1,pt2,pt3,\dots}}{\parg{A,B,C}}{} |
| 168 |
\midrule |
| 169 |
options & default & definition \\ |
| 170 |
\midrule |
| 171 |
\TOline{out} {} {allows to clip the outside of the object} |
| 172 |
\end{tabular} |
| 173 |
\end{NewMacroBox} |
| 174 |
|
| 175 |
\subsubsection{\tkzcname{tkzClipPolygon}} |
| 176 |
|
| 177 |
\begin{tkzexample}[latex=7cm,small] |
| 178 |
\begin{tikzpicture}[scale=1.25] |
| 179 |
\tkzDefPoint(0,0){A} |
| 180 |
\tkzDefPoint(4,0){B} |
| 181 |
\tkzDefPoint(1,3){C} |
| 182 |
\tkzDrawPolygon(A,B,C) |
| 183 |
\tkzDefPoint(0,2){D} |
| 184 |
\tkzDefPoint(2,0){E} |
| 185 |
\tkzDrawPoints(D,E) |
| 186 |
\tkzLabelPoints(D,E) |
| 187 |
\tkzClipPolygon(A,B,C) |
| 188 |
\tkzDrawLine[new](D,E) |
| 189 |
\end{tikzpicture} |
| 190 |
\end{tkzexample} |
| 191 |
|
| 192 |
\subsubsection{\tkzcname{tkzClipPolygon[out]}} |
| 193 |
|
| 194 |
\begin{tkzexample}[latex=7cm,small] |
| 195 |
\begin{tikzpicture}[scale=1] |
| 196 |
\tkzDefPoint(0,0){P1} |
| 197 |
\tkzDefPoint(4,0){P2} |
| 198 |
\tkzDefPoint(4,4){P3} |
| 199 |
\tkzDefPoint(0,4){P4} |
| 200 |
\tkzDefPoint(1,1){Q1} |
| 201 |
\tkzDefPoint(3,1){Q2} |
| 202 |
\tkzDefPoint(3,3){Q3} |
| 203 |
\tkzDefPoint(1,3){Q4} |
| 204 |
\tkzDrawPolygon(P1,P2,P3,P4) |
| 205 |
\begin{scope} |
| 206 |
\tkzClipPolygon[out](Q1,Q2,Q3,Q4) |
| 207 |
\tkzFillPolygon[teal!20](P1,P2,P3,P4) |
| 208 |
\end{scope} |
| 209 |
\tkzDrawPolygon(Q1,Q2,Q3,Q4) |
| 210 |
\end{tikzpicture} |
| 211 |
\end{tkzexample} |
| 212 |
|
| 213 |
\subsubsection{Example: use of \code{Clip} for Sangaku in a square} |
| 214 |
\begin{tkzexample}[latex=7cm, small] |
| 215 |
\begin{tikzpicture}[scale=.75] |
| 216 |
\tkzDefPoint(0,0){A} \tkzDefPoint(8,0){B} |
| 217 |
\tkzDefSquare(A,B) \tkzGetPoints{C}{D} |
| 218 |
\tkzDefPoint(4,8){F} |
| 219 |
\tkzDefTriangle[equilateral](C,D) |
| 220 |
\tkzGetPoint{I} |
| 221 |
\tkzDefPointBy[projection=onto B--C](I) |
| 222 |
\tkzGetPoint{J} |
| 223 |
\tkzInterLL(D,B)(I,J) \tkzGetPoint{K} |
| 224 |
\tkzDefPointBy[symmetry=center K](B) |
| 225 |
\tkzGetPoint{M} |
| 226 |
\tkzClipPolygon(B,C,D,A) |
| 227 |
\tkzFillPolygon[color = orange](A,B,C,D) |
| 228 |
\tkzFillCircle[color = yellow](M,I) |
| 229 |
\tkzFillCircle[color = blue!50!black](F,D) |
| 230 |
\end{tikzpicture} |
| 231 |
\end{tkzexample} |
| 232 |
|
| 233 |
\subsection{Clipping a disc} |
| 234 |
|
| 235 |
\begin{NewMacroBox}{tkzClipCircle}{\oarg{local options}\parg{A,B}}% |
| 236 |
\begin{tabular}{lll}% |
| 237 |
\toprule |
| 238 |
arguments & example & explanation \\ |
| 239 |
\midrule |
| 240 |
\TAline{\parg{A,B}}{\parg{A,B}} {AB radius} |
| 241 |
\bottomrule |
| 242 |
\end{tabular} |
| 243 |
|
| 244 |
\medskip |
| 245 |
\begin{tabular}{lll}% |
| 246 |
options & default & definition \\ |
| 247 |
\midrule |
| 248 |
\TOline{out} {} {allows to clip the outside of the object} |
| 249 |
\bottomrule |
| 250 |
\end{tabular} |
| 251 |
|
| 252 |
\medskip |
| 253 |
It is not necessary to put \tkzname{radius} because that is the default option. |
| 254 |
\end{NewMacroBox} |
| 255 |
|
| 256 |
\subsubsection{Simple clip} |
| 257 |
\begin{tkzexample}[latex=6cm,small] |
| 258 |
\begin{tikzpicture}[scale=.5] |
| 259 |
\tkzDefPoint(0,0){A} \tkzDefPoint(2,2){O} |
| 260 |
\tkzDefPoint(4,4){B} \tkzDefPoint(5,5){C} |
| 261 |
\tkzDrawPoints(O,A,B,C) |
| 262 |
\tkzLabelPoints(O,A,B,C) |
| 263 |
\tkzDrawCircle(O,A) |
| 264 |
\tkzClipCircle(O,A) |
| 265 |
\tkzDrawLine(A,C) |
| 266 |
\tkzDrawCircle[fill=teal!10,opacity=.5](C,O) |
| 267 |
\end{tikzpicture} |
| 268 |
\end{tkzexample} |
| 269 |
|
| 270 |
\subsection{Clip out} |
| 271 |
|
| 272 |
\begin{tkzexample}[latex=6cm,small] |
| 273 |
\begin{tikzpicture} |
| 274 |
\tkzInit[xmin=-3,ymin=-2,xmax=4,ymax=3] |
| 275 |
\tkzDefPoint(0,0){O} |
| 276 |
\tkzDefPoint(-4,-2){A} |
| 277 |
\tkzDefPoint(3,1){B} |
| 278 |
\tkzDefCircle[R](O,2) \tkzGetPoint{o} |
| 279 |
\tkzDrawPoints(A,B) % to have a good bounding box |
| 280 |
\begin{scope} |
| 281 |
\tkzClipCircle[out](O,o) |
| 282 |
\tkzDrawLines(A,B) |
| 283 |
\end{scope} |
| 284 |
\end{tikzpicture} |
| 285 |
\end{tkzexample} |
| 286 |
|
| 287 |
\subsection{Intersection of disks} |
| 288 |
|
| 289 |
\begin{tkzexample}[latex=6cm,small] |
| 290 |
\begin{tikzpicture} |
| 291 |
\tkzDefPoints{0/0/O,4/0/A,0/4/B} |
| 292 |
\tkzDrawPolygon[fill=teal](O,A,B) |
| 293 |
\tkzClipPolygon(O,A,B) |
| 294 |
\tkzClipCircle(A,O) |
| 295 |
\tkzClipCircle(B,O) |
| 296 |
\tkzFillPolygon[white](O,A,B) |
| 297 |
\end{tikzpicture} |
| 298 |
\end{tkzexample} |
| 299 |
|
| 300 |
see a more complex example about clipping here : \ref{About clipping circles} |
| 301 |
|
| 302 |
\subsection{Clipping a sector} |
| 303 |
\tkzHandBomb\ Attention the arguments vary according to the options. |
| 304 |
\begin{NewMacroBox}{tkzClipSector}{\oarg{local options}\parg{O,\dots}\parg{\dots}}% |
| 305 |
\begin{tabular}{lll}% |
| 306 |
options & default & definition \\ |
| 307 |
\midrule |
| 308 |
\TOline{towards}{towards}{$O$ is the center and the sector starts from $A$ to $(OB)$} |
| 309 |
\TOline{rotate} {towards}{The sector starts from $A$ and the angle determines its amplitude. } |
| 310 |
\TOline{R}{towards}{We give the radius and two angles} |
| 311 |
\bottomrule |
| 312 |
\end{tabular} |
| 313 |
|
| 314 |
\medskip |
| 315 |
You have to add, of course, all the styles of \TIKZ\ for tracings... |
| 316 |
|
| 317 |
\medskip |
| 318 |
\begin{tabular}{lll}% |
| 319 |
\toprule |
| 320 |
options & arguments & example \\ |
| 321 |
\midrule |
| 322 |
\TOline{towards}{\parg{pt,pt}\parg{pt}}{\tkzcname{tkzClipSector(O,A)(B)}} |
| 323 |
\TOline{rotate} {\parg{pt,pt}\parg{angle}}{\tkzcname{tkzClipSector[rotate](O,A)(90)}} |
| 324 |
\TOline{R}{\parg{pt,$r$}\parg{angle 1,angle 2}}{\tkzcname{tkzClipSector[R](O,2)(30,90)}} |
| 325 |
\end{tabular} |
| 326 |
\end{NewMacroBox} |
| 327 |
|
| 328 |
\subsubsection{Example 1} |
| 329 |
\begin{tkzexample}[latex=7cm,small] |
| 330 |
\begin{tikzpicture}[scale=0.5] |
| 331 |
\tkzDefPoint(0,0){a} |
| 332 |
\tkzDefPoint(12,0){b} |
| 333 |
\tkzDefPoint(4,10){c} |
| 334 |
\tkzInterCC[R](a,6)(b,8) |
| 335 |
\tkzGetFirstPoint{AB1} \tkzGetSecondPoint{AB2} |
| 336 |
\tkzInterCC[R](a,6)(c,6) |
| 337 |
\tkzGetFirstPoint{AC1} \tkzGetSecondPoint{AC2} |
| 338 |
\tkzInterCC[R](b,8)(c,6) |
| 339 |
\tkzGetFirstPoint{BC1} \tkzGetSecondPoint{BC2} |
| 340 |
\tkzDrawArc(a,AB2)(AB1) |
| 341 |
\tkzDrawArc(b,AB1)(AB2) |
| 342 |
\tkzDrawArc(a,AC2)(AC1) |
| 343 |
\tkzDrawArc(c,AC1)(AC2) |
| 344 |
\tkzDrawArc(b,BC2)(BC1) |
| 345 |
\tkzDrawArc(c,BC1)(BC2) |
| 346 |
\begin{scope} |
| 347 |
\tkzClipSector(b,BC2)(BC1) |
| 348 |
\tkzFillSector[teal!40!white](c,BC1)(BC2) |
| 349 |
\end{scope} |
| 350 |
\begin{scope} |
| 351 |
\tkzClipSector(a,AB2)(AB1) |
| 352 |
\tkzFillSector[teal!40!white](b,AB1)(AB2) |
| 353 |
\end{scope} |
| 354 |
\begin{scope} |
| 355 |
\tkzClipSector(a,AC2)(AC1) |
| 356 |
\tkzFillSector[teal!40!white](c,AC1)(AC2) |
| 357 |
\end{scope} |
| 358 |
\end{tikzpicture} |
| 359 |
\end{tkzexample} |
| 360 |
|
| 361 |
\subsubsection{Example 2} |
| 362 |
\begin{tkzexample}[latex=7cm,small] |
| 363 |
\begin{tikzpicture}[scale=1.5] |
| 364 |
\tkzDefPoint(0,0){O} |
| 365 |
\tkzDefPoint(2,-1){A} |
| 366 |
\tkzDefPoint(1,1){B} |
| 367 |
\tkzDrawSector[new,dashed](O,A)(B) |
| 368 |
\tkzDrawSector[new](O,B)(A) |
| 369 |
\begin{scope} |
| 370 |
\tkzClipSector(O,B)(A) |
| 371 |
\tkzDefSquare(O,B) \tkzGetPoints{B'}{O'} |
| 372 |
\tkzDrawPolygon[color=teal,fill=teal!20](O,B,B',O') |
| 373 |
\end{scope} |
| 374 |
\tkzDrawPoints(A,B,O) |
| 375 |
\end{tikzpicture} |
| 376 |
\end{tkzexample} |
| 377 |
|
| 378 |
|
| 379 |
\subsection{Options from \TIKZ: trim left or right} |
| 380 |
See the \tkzimp{pgfmanual} |
| 381 |
|
| 382 |
\subsection{\TIKZ\ Controls \tkzcname{pgfinterruptboundingbox} and \tkzcname{endpgfinterruptboundingbox}} |
| 383 |
This command temporarily interrupts the calculation of the box and configures a new box. |
| 384 |
See the \tkzimp{pgfmanual} |
| 385 |
|
| 386 |
\subsubsection{Example about contolling the bouding box} |
| 387 |
\begin{tkzexample}[latex=7cm,small] |
| 388 |
\begin{tikzpicture} |
| 389 |
\tkzDefPoint(0,5){A}\tkzDefPoint(5,4){B} |
| 390 |
\tkzDefPoint(0,0){C}\tkzDefPoint(5,1){D} |
| 391 |
\tkzDrawSegments(A,B C,D A,C) |
| 392 |
\pgfinterruptboundingbox |
| 393 |
\tkzInterLL(A,B)(C,D)\tkzGetPoint{I} |
| 394 |
\endpgfinterruptboundingbox |
| 395 |
\tkzClipBB |
| 396 |
\tkzDrawCircle(I,B) |
| 397 |
\end{tikzpicture} |
| 398 |
\end{tkzexample} |
| 399 |
|
| 400 |
\subsection{Reverse clip: tkzreverseclip} |
| 401 |
|
| 402 |
In order to use this option, a bounding box must be defined. |
| 403 |
|
| 404 |
\begin{tkzltxexample}[] |
| 405 |
\tikzset{tkzreverseclip/.style={insert path={ |
| 406 |
(current bounding box.south west) --(current bounding box.north west) |
| 407 |
--(current bounding box.north east) -- (current bounding box.south east) |
| 408 |
-- cycle} }} |
| 409 |
\end{tkzltxexample} |
| 410 |
|
| 411 |
\subsubsection{Example with \tkzcname{tkzClipPolygon[out]}} |
| 412 |
\tkzcname{tkzClipPolygon[out]}, \tkzcname{tkzClipCircle[out]} use this option. |
| 413 |
\begin{tkzexample}[vbox,small] |
| 414 |
\begin{tikzpicture}[scale=1] |
| 415 |
\tkzInit[xmin=-5,xmax=5,ymin=-4,ymax=6] |
| 416 |
\tkzClip |
| 417 |
\tkzDefPoints{-.5/0/P1,.5/0/P2} |
| 418 |
\foreach \i [count=\j from 3] in {2,...,7}{% |
| 419 |
\tkzDefShiftPoint[P\i]({45*(\i-1)}:1){P\j}} |
| 420 |
\tkzClipPolygon[out](P1,P...,P8) |
| 421 |
\tkzCalcLength(P1,P5)\tkzGetLength{r} |
| 422 |
\begin{scope}[blend group=screen] |
| 423 |
\foreach \i in {1,...,8}{% |
| 424 |
\tkzDefCircle[R](P\i,\r) \tkzGetPoint{x} |
| 425 |
\tkzFillCircle[color=teal](P\i,x)} |
| 426 |
\end{scope} |
| 427 |
\end{tikzpicture} |
| 428 |
\end{tkzexample} |
| 429 |
|
| 430 |
\endinput |