| 1 |
\vfill% |
| 2 |
\subsubsection{\texorpdfstring{\ding{224} \itshape The other contents}{The other contents}}\vspace{6pt}% |
| 3 |
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% |
| 4 |
For all the \textit{other contents} available for the cells of the periodic table, two keys can be set: \red{<content name> color} and \red{<content name> font}. |
| 5 |
\\ [10pt]\tikz{\node[text width=\linewidth-.6666em,fill=cItemList!5!white,draw=cItemList,rounded corners=2pt] {\textbf{The \red{<content name>}'s list}: |
| 6 |
\\ [5pt]\begin{minipage}{.45\linewidth}\footnotesize |
| 7 |
\begin{itemlist} |
| 8 |
%\item\red{\textbf{name}}:\hspace{.5ex}element name |
| 9 |
\item\red{\textbf{R}}:\hspace{.5ex}atomic radius |
| 10 |
\item\red{\textbf{Rcov}}:\hspace{.5ex}covalent radius |
| 11 |
\item\red{\textbf{Rion}}:\hspace{.5ex}ionic radius |
| 12 |
\item\red{\textbf{Ei}}:\hspace{.5ex}first ionization energy |
| 13 |
\item\red{\textbf{eneg}}:\hspace{.5ex}electronegativity (Pauling) |
| 14 |
\item\red{\textbf{eaff}}:\hspace{.5ex}electroaffnity |
| 15 |
%\item\red{\textbf{O}}:\hspace{.5ex}oxidation states |
| 16 |
\item\red{\textbf{Tmelt}}:\hspace{.5ex}melting point (Kelvin) |
| 17 |
\item\red{\textbf{TmeltC}}:\hspace{.5ex}melting point (Celsius degrees) |
| 18 |
\item\red{\textbf{Tboil}}:\hspace{.5ex}boiling point (Kelvin) |
| 19 |
\item\red{\textbf{TboilC}}:\hspace{.5ex}boiling point (Celsius degrees) |
| 20 |
\end{itemlist} |
| 21 |
\end{minipage}\begin{minipage}{.55\linewidth}\footnotesize |
| 22 |
\begin{itemlist} |
| 23 |
\item\red{\textbf{eConfign}}:\hspace{.5ex}electronic configuration (increasing n) |
| 24 |
\item\red{\textbf{eConfignl}}:\hspace{.5ex}electronic configuration (increasing n+$\ell$) |
| 25 |
%\item\red{\textbf{d}}:\hspace{.5ex}density |
| 26 |
\item\red{\textbf{Cp}}:\hspace{.5ex}specific heat capacity |
| 27 |
\item\red{\textbf{kT}}:\hspace{.5ex}thermal conductivity |
| 28 |
\item\red{\textbf{lsa}}:\hspace{.5ex}lattice constant -- a |
| 29 |
\item\red{\textbf{lsb}}:\hspace{.5ex}lattice constant -- b |
| 30 |
\item\red{\textbf{lsc}}:\hspace{.5ex}lattice constant -- c |
| 31 |
\item\red{\textbf{lsca}}:\hspace{.5ex}lattice c/a ratio |
| 32 |
\item\red{\textbf{DiscC}}:\hspace{.5ex}country of discovery |
| 33 |
\item\red{\textbf{spectra}}:\hspace{.5ex}visible range spectral lines |
| 34 |
\end{itemlist} |
| 35 |
\end{minipage} |
| 36 |
};}\vfill% |
| 37 |
% <content name> color |
| 38 |
\pgfPTMoption{4}{<content name> color}{black}{% |
| 39 |
Sets the \red{<content name>} color. |
| 40 |
} |
| 41 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[Z list={1,...,36},name color=blue]% |
| 42 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Z list={1,...,36},name color=blue]}}% |
| 43 |
\\ [5pt]\pgfPTendoption% |
| 44 |
\vfill% |
| 45 |
% <content name> font |
| 46 |
\newpage\ \\ [-32pt]% |
| 47 |
\pgfPTMoption{4}{<content name> font}{\string\tiny\string\bfseries}{% |
| 48 |
Sets the \red{<content name>} font. |
| 49 |
} |
| 50 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[Z list={1,...,36},name font=\string\tiny\string\itshape]% |
| 51 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Z list={1,...,36},name font=\tiny\itshape]}}% |
| 52 |
\\ [5pt]\pgfPTendoption% |
| 53 |
% cell font (style) all fonts except Z, CS |
| 54 |
\pgfPTMstyle{4}{cell font}{\string\bfseries\string\tiny}% |
| 55 |
{Style to set the font for all cell contents, except for the Z and Chemical Symbol fonts.}% |
| 56 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[Z list={1,...,36},cell font=\string\tiny\string\itshape]% |
| 57 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Z list={1,...,36},cell font=\tiny\itshape]}}% |
| 58 |
\\ [5pt]\pgfPTendstyle% |
| 59 |
% cell color (style) all colors except Z, CS |
| 60 |
\pgfPTMstyle{4}{cell color}{black}% |
| 61 |
{Style to set the color for all cell contents, except for the Z and Chemical Symbol colors.}% |
| 62 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[Z list={1,...,36},cell color=blue]% |
| 63 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Z list={1,...,36},cell color=blue]}}% |
| 64 |
\\ [5pt]\pgfPTendstyle% |
| 65 |
\vfill%\\ [10pt] |
| 66 |
The precision of the \textit{other contents}, which have numerical values, can also be set by a key. \textit{Atomic radius, covalent radius, and ionic radius all have integer values, so precision does not apply to them}. |
| 67 |
\vfill% |
| 68 |
\newpage\ \\ [-32pt]% |
| 69 |
% E precision |
| 70 |
\pgfPTMoption{4}{E precision}{-1}{% |
| 71 |
Sets the first ionization energy and the electroaffnity precision, \ie, the decimal places displayed in their value, performing the respective rounding, without zero padding the value. |
| 72 |
\\ [10pt]\tikz{\node[text width=\linewidth-.6666em,fill=orange!5!white,draw=orange,rounded corners=2pt] {\textbf{\red{NOTE}}:\\ Rounding is performed over energy values witch actually have a maximum of 3 decimal places. So giving this key a value of -1 (the value of the energy as-is) or 3 has the same effect. |
| 73 |
\\ \textit{Therefore the values provided to this key should be any integer between -1 and 2, \ie, -1, 0, 1 or 2. Any other integer provided will be processed as -1.}};} |
| 74 |
} |
| 75 |
\vfill%\\ [10pt] |
| 76 |
\pgfPTresetstyle\pgfPTMbuildcellstyle{myE}(5,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-2.5;Ei), % |
| 77 |
(5;2.5-3;eaff)]% |
| 78 |
\pgfPTbuildcellstyle{myE}(5,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-2.5;Ei),(5;2.5-3;eaff)]% |
| 79 |
\\ [-4pt]\pgfPTMmacrobox[l]{pgfPTstyle}[Z list={1,...,54},cell style=myE,show title=false]% |
| 80 |
\pgfPTstyle[Z list={1,...,54},cell style=myE,show title=false]% |
| 81 |
\\ [-4pt]\pgfPTMmacrobox{pgfPT}[]% |
| 82 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT}}% |
| 83 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[E precision=0]% |
| 84 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[E precision=0]}}% |
| 85 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[E precision=1]% |
| 86 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[E precision=1]}}% |
| 87 |
\vfill% |
| 88 |
\newpage%\\ [10pt] |
| 89 |
\pgfPTMmacrobox{pgfPT}[E precision=2]% |
| 90 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[E precision=2]}}% |
| 91 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[E precision=3]% |
| 92 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[E precision=3]}}% |
| 93 |
\\ [0pt]\pgfPTendoption% |
| 94 |
% T precision |
| 95 |
\pgfPTMoption{4}{T precision}{-1}{% |
| 96 |
Sets the melting point an boiling point precision, \ie, the decimal places displayed in their value, performing the respective rounding, without zero padding the value. |
| 97 |
\\ [10pt]\tikz{\node[text width=\linewidth-.6666em,fill=orange!5!white,draw=orange,rounded corners=2pt] {\textbf{\red{NOTE}}:\\ Rounding is performed over melting or boiling point values witch actually have a maximum, res\-pectively, of 4 or 2 decimal places. So giving this key a value of -1 (the value of the melting or boiling point as-is) or, respectively, 4 or 2 has the same effect. |
| 98 |
\\ \textit{Therefore the values provided to this key should be any integer between -1 and 3 or 2. Any other integer provided will be processed as -1.}};} |
| 99 |
} |
| 100 |
\\ [10pt]\pgfPTMbuildcellstyle{myT}(6,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-2.5;Tmelt), % |
| 101 |
(5;2.5-3;Tboil),(6;1-2.5;TmeltC),(6;2.5-3;TboilC)]% |
| 102 |
\pgfPTbuildcellstyle{myT}(6,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-2.5;Tmelt),(5;2.5-3;Tboil),(6;1-2.5;TmeltC),(6;2.5-3;TboilC)]% |
| 103 |
\\ [-4pt]\pgfPTMmacrobox[l]{pgfPTstyle}[Z list={1,...,36},cell style=myT,Tmelt color=blue!50!black,TmeltC color=blue,Tboil color=red!50!black,TboilC color=red,show title=false]% |
| 104 |
\pgfPTstyle[Z list={1,...,36},cell style=myT,Tmelt color=blue!50!black,TmeltC color=blue,Tboil color=red!50!black,TboilC color=red,show title=false]% |
| 105 |
\\ [-4pt]\pgfPTMmacrobox{pgfPT}[]% |
| 106 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT}}% |
| 107 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[T precision=0]% |
| 108 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[T precision=0]}}% |
| 109 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[T precision=1]% |
| 110 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[T precision=1]}}% |
| 111 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[T precision=2]% |
| 112 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[T precision=2]}}% |
| 113 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[T precision=3]% |
| 114 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[T precision=3]}}% |
| 115 |
\\ [5pt]\pgfPTMmacrobox{pgfPT}[T precision=4]% |
| 116 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[T precision=4]}}% |
| 117 |
\\ [0pt]\pgfPTendoption% |
| 118 |
\newpage\ \\ [-32pt]% |
| 119 |
% Cp precision |
| 120 |
\pgfPTMoption{4}{Cp precision}{-1}{% |
| 121 |
Sets the specific heat capacity precision, \ie, the decimal places displayed in their value, performing the respective rounding, without zero padding the value. |
| 122 |
\\ [10pt]\tikz{\node[text width=\linewidth-.6666em,fill=orange!5!white,draw=orange,rounded corners=2pt] {\textbf{\red{NOTE}}:\\ Rounding is performed over density values witch actually have a maximum 3 decimal places. So giving this key a value of -1 (the value of the melting or boiling point as-is) or 3 has the same effect. |
| 123 |
\\ \textit{Therefore the values provided to this key should be any integer between -1 and 2. Any other integer provided will be processed as -1.}};} |
| 124 |
} |
| 125 |
\vfill%\\ [10pt] |
| 126 |
\pgfPTMbuildcellstyle{myCp}(5,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-3;Cp)]% |
| 127 |
\pgfPTbuildcellstyle{myCp}(5,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-3;Cp)]% |
| 128 |
\\ [-4pt]\pgfPTMmacrobox[l]{pgfPTstyle}[Z list={1,...,36},cell style=myCp]% |
| 129 |
\pgfPTstyle[Z list={1,...,36},cell style=myCp]% |
| 130 |
\\ [-4pt]\pgfPTMmacrobox{pgfPT}[]% |
| 131 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT}}% |
| 132 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[Cp precision=0]% |
| 133 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Cp precision=0]}}% |
| 134 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[Cp precision=1]% |
| 135 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Cp precision=1]}}% |
| 136 |
\vfill% |
| 137 |
\newpage%\\ [10pt] |
| 138 |
\pgfPTMmacrobox{pgfPT}[Cp precision=2]% |
| 139 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Cp precision=2]}}% |
| 140 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[Cp precision=3]% |
| 141 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[Cp precision=3]}}% |
| 142 |
\\ [0pt]\pgfPTendoption% |
| 143 |
% kT precision |
| 144 |
\vfill\vfill% |
| 145 |
\pgfPTMoption{4}{kT precision}{-1}{% |
| 146 |
Sets the thermal condutivity precision, \ie, the decimal places displayed in their value, performing the respective rounding, without zero padding the value. |
| 147 |
\\ [10pt]\tikz{\node[text width=\linewidth-.6666em,fill=orange!5!white,draw=orange,rounded corners=2pt] {\textbf{\red{NOTE}}:\\ Rounding is performed over density values witch actually have a maximum 5 decimal places. So giving this key a value of -1 (the value of the melting or boiling point as-is) or 5 has the same effect. |
| 148 |
\\ \textit{Therefore the values provided to this key should be any integer between -1 and 4. Any other integer provided will be processed as -1.}};} |
| 149 |
} |
| 150 |
\\ [10pt]\pgfPTMbuildcellstyle{mykT}(5,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-3;kT)]% |
| 151 |
\pgfPTbuildcellstyle{mykT}(5,3)[(1;1-2;Z),(1;3;radio),(2-3;1.5-3.5;CS),(4;1-3;name),(5;1-3;kT)]% |
| 152 |
\\ [-4pt]\pgfPTMmacrobox[l]{pgfPTstyle}[Z list={1,...,36},cell style=mykT,show title=false]% |
| 153 |
\pgfPTstyle[Z list={1,...,36},cell style=mykT,show title=false]% |
| 154 |
\\ [-4pt]\pgfPTMmacrobox{pgfPT}[]% |
| 155 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT}}% |
| 156 |
\vfill% |
| 157 |
\newpage%\\ [10pt] |
| 158 |
\pgfPTMmacrobox{pgfPT}[kT precision=0]% |
| 159 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[kT precision=0]}}% |
| 160 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[kT precision=1]% |
| 161 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[kT precision=1]}}% |
| 162 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[kT precision=2]% |
| 163 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[kT precision=2]}}% |
| 164 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[kT precision=3]% |
| 165 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[kT precision=3]}}% |
| 166 |
\\ [10pt]\pgfPTMmacrobox{pgfPT}[kT precision=4]% |
| 167 |
\\ [0pt]\vbox to 0pt{\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[kT precision=4]}}}% |
| 168 |
\newpage%\\ [10pt] |
| 169 |
\pgfPTMmacrobox{pgfPT}[kT precision=5]% |
| 170 |
\\ [10pt]\makebox[\linewidth][c]{\scalebox{.6}{\pgfPT[kT precision=5]}}% |
| 171 |
\\ [0pt]\pgfPTendoption% |
| 172 |
\\ [10pt]\pgfPTMmacrobox[l]{pgfPTresetstyle}[]% |
| 173 |
\pgfPTresetstyle% |
| 174 |
\endinput |