Debian Codegraph @

texmf-dist/doc/latex/nl-interval/nl-interval.tex

raw
1 \documentclass{article}
2
3 \usepackage{fouriernc}
4 \usepackage[utf8]{inputenc}
5 \usepackage{nl-interval}
6 \usepackage{indentfirst}
7 \usepackage{fancyvrb}
8 \usepackage{siunitx}
9
10 \title{The {\bf nl-interval} package}
11 \author{Antero Neves}
12 \date{12 March 2021 \quad version 1.0}
13
14 \begin{document}
15 \maketitle
16
17 \begin{abstract}
18 This is a \LaTeX\ package that aims to simplify and agilize the process of representing intervals in the real axis.
19 Four commands are provided: \verb*|\nlAxisX|, \verb*|\nlnuminf|, \verb*|\nlinfnum| and \verb*|\nlnumnum|, they were built around the packages {\bf tkz-fct}, {\bf ifthen} and {\bf xparse} and require being used inside a \verb*|tikzpicture| environment.
20 \end{abstract}
21
22
23 \section{How to use}
24
25 \subsection{How to load the package}
26
27 The package is loaded as usual, through the command
28
29 \medskip
30
31 \verb*|\usepackage{nl-interval}|
32
33 \medskip
34
35 There are, at this time, no options available to include here.
36
37 \subsection{The commands}
38
39 The first command is \verb*|\nlAxisX| and it simply draws the \(x\) axis where the intervals are going to be represented. It has two mandatory inputs: the minimum and maximum of the axis, so, the full instruction is: \Verb*|\nlAxisX{min}{max}|:
40
41
42 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
43 \begin{tikzpicture}
44 \nlAxisX{-2}{5}
45 \end{tikzpicture}
46 \end{Verbatim}
47
48
49 would give the output:
50
51 \medskip
52
53 \begin{center}
54 \begin{tikzpicture}
55 \nlAxisX{-2}{5}
56 \end{tikzpicture}
57 \end{center}
58
59
60 After the axis is drawn, one can start placing the intervals. To do this we will consider two kinds of intervals, the ones with infinity, either \(-\infty\) or \(+\infty\) and the ones with two numbers.
61
62 \newpage
63
64
65 Let's start with the first group.
66
67 \begin{itemize}
68 \item \verb*|\nlinfnum| will draw intervals of the kind: \(\left]-\infty, number\right]\) or \(\left]-\infty, number\right[\).
69 \item \verb*|\nlnuminf| will draw intervals of the kind: \(\left[number, +\infty\right[\) or \(\left]number, +\infty\right[\).
70 \end{itemize}
71
72 These two commands also have two mandatory inputs: first one is the number ({\it always a decimal representation, so, something like \(\pi\) doesn't work but there is a workaround!}) and the second if it's an \underline{o}pen or \underline{c}losed interval at the number. So, for instance
73
74 \medskip
75
76 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
77 \begin{tikzpicture}
78 \nlAxisX{-2}{5}
79 \nlnuminf{3}{o}
80 \nlinfnum{1}{c}
81 \end{tikzpicture}
82 \end{Verbatim}
83
84 gives us
85
86 \medskip
87
88
89 \begin{center}
90 \begin{tikzpicture}
91 \nlAxisX{-2}{5}
92 \nlnuminf{3}{o}
93 \nlinfnum{1}{c}
94 \end{tikzpicture}
95 \end{center}
96
97 This time, there are a few optional inputs, the full commands are like this:
98
99 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
100 \nlnuminf[1]{number}[2]{o or c}[3]
101 \nlinfnum[1]{number}[2]{o or c}[3]
102 \end{Verbatim}
103
104 \begin{itemize}
105 \item in [1] you can put options like different colours or patters used;
106 \item in [2] you can substitute the number for a letter or an exact representation of the number, don't put it in math environment!;
107 \item in [3] you can change the height of the interval, which is \(0.5\si{\centi\meter}\) by default.
108 \end{itemize}
109
110
111 Let's try some of these options:
112
113 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
114 \begin{tikzpicture}
115 \nlAxisX{-2}{5}
116 \nlnuminf[pattern=north west lines]{1.4142}[\sqrt{2}]{c}[.7]
117 \nlinfnum[red!20]{3.1416}[\pi]{o}
118 \end{tikzpicture}
119 \end{Verbatim}
120
121
122 \begin{center}
123 \begin{tikzpicture}
124 \nlAxisX{-1}{4}
125 \nlnuminf[pattern=north west lines]{1.4142}[\sqrt{2}]{c}[.7]
126 \nlinfnum[red!20]{3.1416}[\pi]{o}
127 \end{tikzpicture}
128 \end{center}
129
130
131 \newpage
132
133 The second group of intervals, works with a single command:
134
135 \begin{itemize}
136 \item \verb*|\nlnumnum|
137 \end{itemize}
138
139 and, since it uses two numbers, we have four mandatory inputs: the numbers and the instruction of closed or open. It works like this:
140
141
142 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
143 \begin{tikzpicture}
144 \nlAxisX{-2}{5}
145 \nlnumnum{-1}{o}{3}{c}
146 \end{tikzpicture}
147 \end{Verbatim}
148
149 \begin{center}
150 \begin{tikzpicture}
151 \nlAxisX{-2}{5}
152 \nlnumnum{-1}{o}{3}{c}
153 \end{tikzpicture}
154 \end{center}
155
156 As with the previous commands, there are a few options, this time we have one more which allows us to change what is shown in the second number:
157
158
159 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
160 \begin{tikzpicture}
161 \nlAxisX{-2}{5}
162 \nlnumnum[red!20]{-1.4142}[-\sqrt{2}]{o}{3.1416}[\pi]{c}
163 \end{tikzpicture}
164 \end{Verbatim}
165
166
167 \begin{center}
168 \begin{tikzpicture}
169 \nlAxisX{-2}{5}
170 \nlnumnum[red!20]{-1.4142}[-\sqrt{2}]{o}{3.1416}[\pi]{c}
171 \end{tikzpicture}
172 \end{center}
173
174
175 \section{Conclusion}
176
177 This is a really simple package (my first attempt at a package) but one that, I hope, can help you draw stuff like:
178
179 \begin{center}
180 \begin{tikzpicture}
181 \nlAxisX{-2}{5}
182 \nlnumnum[red!20]{-1.4142}[-\sqrt{2}]{o}{3.1416}[\pi]{c}
183 \nlnuminf[pattern=north west lines]{1.4142}[\sqrt{2}]{c}[.7]
184 \nlinfnum{2}{o}[.3]
185 \end{tikzpicture}
186 \end{center}
187
188 somewhat quickly and easily. By the way, the instructions for this are:
189
190 \begin{Verbatim}[gobble=1,xleftmargin=5mm]
191 \begin{tikzpicture}
192 \nlAxisX{-2}{5}
193 \nlnumnum[red!20]{-1.4142}[-\sqrt{2}]{o}{3.1416}[\pi]{c}
194 \nlnuminf[pattern=north west lines]{1.4142}[\sqrt{2}]{c}[.7]
195 \nlinfnum{2}{o}[.3]
196 \end{tikzpicture}
197 \end{Verbatim}
198
199
200 \end{document}