Debian Codegraph @

texmf-dist/doc/latex/milsymb/milsymb.tex

raw
1 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
2 %% MilSymb Manual File %%
3 %%-------------------- %%
4 %% Version: 1.03 %%
5 %% Last Updated: 2023-03-27 %%
6 %% Github: https://github.com/ralphieraccoon/MilSymb %%
7 %% Copyright: Damian Crosby 2018 %%
8 %% Licence: Creative Commons Attribution-ShareAlike 4.0 International License %%
9 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
10
11 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
12 % WARNING! Typesetting tables can cause memory overflow. Set --extra-mem-top=10000000 in Typesetting or texmf.cnf %
13 % Table typesetting also takes a very long time. Consider commenting out \pyc commands when editing the rest of the document. %
14 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
15
16 \documentclass[a4paper, titlepage]{article}
17 \usepackage{milsymb, arev, ltablex, makecell, multirow, tikzpagenodes, vhistory, titlesec, float, forest, tocloft, alltt, array, tikz-dimline, threeparttable, textcomp, pifont, colortbl, caption, enumitem, graphicx, pdflscape, adjustbox, graphicx}
18 \keepXColumns
19 \usepackage[a4paper, margin=1.75cm]{geometry}
20 \usepackage[colorlinks=true, urlcolor=blue]{hyperref}
21 \usepackage[gobble=auto]{pythontex}
22 \usetikzlibrary{calc, arrows.meta, matrix}
23 \newcolumntype{n}{>{\raggedright\arraybackslash}m{5cm}}
24 \newcolumntype{s}{>{\centering\arraybackslash}m{1.75cm}}
25 \newcommand\MilSymb{\textbf{\texttt{MilSymb}}}
26 \newcommand\DocLink{\href{https://web.archive.org/web/20150921231042/http://armawiki.zumorc.de/files/NATO/APP-6(C).pdf}{APP6-(C)}}
27 \renewcommand\theadfont{\bfseries}
28 \newenvironment{writett}{\ttfamily}{\par}
29 \setcounter{secnumdepth}{4}
30 \setcounter{tocdepth}{4}
31 \setlength{\cftsubsecnumwidth}{3em}
32 \setlength{\cftsubsubsecnumwidth}{4em}
33 \setlength{\cftparanumwidth}{5em}
34 \DeclareGraphicsExtensions{.png}
35 \title{MilSymb}
36 \author{Damian Crosby}
37 \begin{document}
38 \thispagestyle{empty}
39 \begin{center}
40 \begin{tikzpicture}[remember picture]
41
42 \coordinate (NE) at ($(current page text area.north east)-(1.5, 1.5)$);
43 \coordinate (NW) at ($(current page text area.north west)-(-1.5, 1.5)$);
44 \coordinate (SE) at ($(current page text area.south east)-(1.5, -1.5)$);
45 \coordinate (SW) at ($(current page text area.south west)-(-1.5, -1.5)$);
46
47 \MilLand[faction=hostile, echelon=team, main=infantry, scale=2](NE)
48 \MilAir[faction=friendly, main=military fixed wing, upper=jammer, lower=light, scale=2](NW)
49 \MilSeaSurface[faction=neutral, main=hazardous material transport ship, lower=fast, scale=2](SE)
50 \MilActivity[faction=unknown, main=searching, upper=house to house, scale=2](SW)
51
52 \MilLand[faction=unknown, echelon=battalion, main=armoured, upper=missile, lower=long range, scale=2]($(NE)!0.33!(NW)$)
53 \MilEquipment[faction=neutral, main=heavy machine gun, mobility=pack animal, scale=2]($(NE)!0.66!(NW)$)
54
55 \MilSpace[faction=hostile, main=military earth observation satellite, upper=low earth orbit, lower=radar, scale=2]($(SE)!0.33!(SW)$)
56 \MilInstallation[faction=friendly, main=electric power, upper=nuclear energy, scale=2]($(SE)!0.66!(SW)$)
57
58 \MilSeaSubsurface[faction=friendly, main=snorkelling submarine, upper=auxiliary, lower=nuclear type 5, scale=2]($(NE)!0.2!(SE)$)
59 \MilLand[faction=neutral, echelon=platoon, main=supply, supply={2}{4}, scale=2]($(NE)!0.4!(SE)$)
60 \MilActivity[faction=hostile, main=attempted criminal activity, upper=rape, scale=2]($(NE)!0.6!(SE)$)
61 \MilEquipment[faction=unknown, main=tank recovery vehicle, mobility=wheeled semi trailer, scale=2]($(NE)!0.8!(SE)$)
62
63 \MilMissile[faction=hostile, left=sub surface, right=launched, scale=2]($(NW)!0.2!(SW)$)
64 \MilInstallation[faction=unknown, main=civilian telecommunications, upper=television, scale=2]($(NW)!0.4!(SW)$)
65 \MilSpace[faction=friendly, main=civilian space station, upper=geosynchronous orbit, scale=2]($(NW)!0.6!(SW)$)
66 \MilLand[faction=neutral, echelon=corps, main=armoured, upper=missile, lower=long range, scale=2]($(NW)!0.8!(SW)$)
67
68 \pgfresetboundingbox
69 \path[use as bounding box] (0,0);
70
71 \end{tikzpicture}
72
73 {\let\newpage\relax\maketitle}
74 \end{center}
75
76 \clearpage
77
78 \begin{versionhistory}
79 \renewcommand \vhAuthorColWidth{6cm}
80 \vhEntry{1.0}{2018-04-29}{Damian Crosby}{Creation.}
81 \vhEntry{1.01}{2019-05-07}{Damian Crosby}{Added clarification on DVI output, added clarification that multiple class symbols are found in \texttt{multi}.}
82 \vhEntry{1.02}{2020-03-15}{Damian Crosby}{Fixed scaling and placement errors in the \texttt{speed leader} key code, added note to define \texttt{scale} first in manual when using \texttt{speed leader}, fixed compilation issues in \texttt{landgroup} and \texttt{landheadqurters} to account for updated \texttt{xparse} package, fixed issue with \texttt{frame status} and \texttt{scale} keys not always being updated between commands, changed datestamps to be ISO 8601 compliant as per CTAN request.}
83 \vhEntry{1.03}{2023-03-27}{Damian Crosby}{Hotfix to remove deprecated use of the \texttt{shapes.Symbols} TikZ library alias (now only case-sensitive \texttt{shapes.symbols} is permitted).}
84 \end{versionhistory}
85
86 \clearpage
87
88 \section*{Acknowledgments}
89
90 The author would particularly like to thank the following members of the \TeX\ stack exchange community for their solutions to problems during this package\rq{}s development:
91
92 \begin{itemize}
93 \item \href{https://tex.stackexchange.com/users/39222}{cfr}
94 \item \href{https://tex.stackexchange.com/users/9335}{Kpym}
95 \item \href{https://tex.stackexchange.com/users/586}{Torbj\o rn T.}
96 \item \href{https://tex.stackexchange.com/users/2388}{Ulrike Fischer}
97 \end{itemize}
98
99 \section*{Attributions}
100
101 \begin{itemize}
102 \item The \texttt{combatant} icon in the \textbf{\texttt{MilSeaSurface}} command has been adapated from a \href{https://commons.wikimedia.org/wiki/File:Small_battle_symbol.svg}{work} on Wikimedia Commons by \href{https://commons.wikimedia.org/wiki/User:Kathovo}{Kathovo} under the \href{https://creativecommons.org/licenses/by-sa/3.0/}{CC BY-SA 3.0} licence.
103 \item The Structure of 1\textsuperscript{st} Marine Division (Figure \ref{org}) receration is based on an \href{https://commons.wikimedia.org/wiki/File:1st_US_Marine_Division.png}{image} created by \href{https://commons.wikimedia.org/wiki/User:Noclador}{Noclador} under the \href{https://creativecommons.org/licenses/by-sa/3.0/}{CC BY-SA 3.0} licence.
104 \end{itemize}
105
106 \section*{Licence}
107 In order to comply with the attributions listed above, this package is licenced under \href{https://creativecommons.org/licenses/by-sa/4.0/}{CC BY-SA 4.0}.
108
109 \clearpage
110
111 \tableofcontents
112
113 \clearpage
114
115 \begin{pycode}
116 from manual_scripts import gen_symbol_tables, gen_multiple_class, gen_hidden
117
118 symbol_tables = gen_symbol_tables()
119 multi = gen_multiple_class()
120 hidden = gen_hidden()
121
122 \end{pycode}
123
124 \section{Introduction}
125
126 \subsection{Package Summary}
127
128 This package allows for the drawing of symbols from the \textit{NATO Joint Military Symbology} library, as detailed in the document \DocLink. It is designed to replicate the \lq\lq{}building block\rq\rq{} nature of the symbols in its command syntax using \texttt{pgf} keys, allowing the user to generate the entire symbol, including additional text fields, in one compact command.
129
130 \subsection{Package Dependencies}
131
132 The \MilSymb\ package uses the following packages as dependencies:
133
134 \begin{itemize}
135 \item \texttt{tikz}
136 \item \texttt{fontenc}
137 \item \texttt{fix-cm}
138 \item \texttt{arevmath}
139 \item \texttt{marvosym}
140 \item \texttt{acronym}
141 \item \texttt{amssymb}
142 \item \texttt{xifthen}
143 \item \texttt{xparse}
144 \end{itemize}
145
146 \subsection{Using \MilSymb}
147
148 To use \MilSymb\ in your document, just include \texttt{\textbackslash usepackage\{milsymb\}} in your preamble. \MilSymb\ has only been tested on \LaTeX, other \TeX\ flavours will probably not work. All \MilSymb\ symbols must be placed inside a TikZ environment, either as part of an inline \texttt{tikz} command or an \texttt{tikzpicture} enviroment. As with other packages that use TikZ or other postscript based drawing programs, DVI format is not directly supported, though some DVI viewers are able to display TikZ images by embedding postscript.
149
150 \subsubsection{Package Options}
151
152 Currently, there are no package options specified for \MilSymb.
153
154 \subsubsection{Symbol Construction}
155
156 \textit{NATO Joint Military Symbology} uses a \lq\lq{}building block\rq\rq{} philosophy when constructing military symbols, so each symbol can be broken into individual components. Only a brief overview will be given here, more information can be found in \DocLink. These components are shown in Figure \ref{Annotate}.
157
158 \begin{figure}[H]
159 \centering
160 \begin{tikzpicture}
161 \MilLand[faction=friendly, main=armoured engineer, upper=survey, lower=bicycle equipped, frame status=normal, echelon=platoon, scale=2, movement={2}{2,-3}, unique designation=EX1, country indicator=GBR, altitude value=150, evaluation rating=A1, staff comments=EXAMPLE, higher formation=ENG 21]
162 \draw [red, {Circle[length=5pt]}-] (-1,-0.75) -- ++(225:1) -- ++(180:2) node[anchor=east]{Frame};
163 \draw [red, {Circle[length=5pt]}-] (0.1,0) -- ++(180:2) node[anchor=east]{Icon};
164 \draw [red, {Circle[length=5pt]}-] (0.05,0.62) -- ++(135:1) -- ++(180:2.7) node[anchor=east]{Modifier};
165 \draw [red, {Circle[length=5pt]}-] (0.05,-0.62) -- ++(225:2) -- ++(180:2) node[anchor=east]{Modifier};
166 \draw [red, {Circle[length=5pt]}-{Circle[length=5pt]}] (-2,-0.6) -- ++(180:1) -- ++(135:0.9) coordinate(A) -- ++(45:0.9) -- ++(0:1);
167 \draw [red, {Circle[length=5pt]}-{Circle[length=5pt]}] (3,0.65) -- ++(0:1) -- ++(315:0.9) coordinate(B) -- ++(225:0.9) -- ++(180:1.5);
168 \draw [shift={(-1,0.7)}, red, {Circle[length=5pt]}-] (3,0.65) -- ++(0:1.3) -- ++(315:1);
169 \draw [shift={(-1,-0.67)}, red, {Circle[length=5pt]}-] (3,-0.65) -- ++(0:1.3) -- ++(45:1);
170 \draw [red] (A) -- ++(180:1) node[anchor=east]{Amplifiers};
171 \draw [red] (B) -- ++(0:1) node[anchor=west]{Amplifiers};
172 \draw [red, {Circle[length=5pt]}-] (0,1.2) -- ++(90:1) node[anchor=south]{Amplifier};
173 \draw [red, {Circle[length=5pt]}-] (0,-1.9) -- ++(270:1) node[anchor=north]{Amplifier};
174 \end{tikzpicture}
175 \caption{Annotation of symbol components.}
176 \label{Annotate}
177 \end{figure}
178
179 \begin{itemize}
180 \item The \textbf{Frame} consists of a filled shape encompassing the icon and modifiers, denoting the type (land, sea surface, air, etc.) and faction (friendly, hostile, neutral, unknown) of the symbol. In some situations this is optional.
181 \item The \textbf{Icon} denotes the entity the symbol represents (infantry, tank, mine, etc.). It is always placed in the centre of the symbol.
182 \item The \textbf{Modifiers} are symbols that go above and below the icon (or to the left and right in the case of missile symbols, and just below the frame in the case of equipment symbols). These \lq\lq{}modify\rq\rq{} the entity with additional features or information (equipped with rocket launchers, extra heavy, etc.) These are usually optional.
183 \item The \textbf{Amplifiers} are text and symbols that go outside the frame, and denote additional attributes of the symbol (country of origin, military echelon, speed and direction, etc.). These are always optional.
184 \end{itemize}
185
186 \section{Symbol Commands}
187
188 \subsection{General Command Structure}
189
190 The general structure of a \MilSymb\ command is as follows. Syntax in \textit{italics} is optional:\\
191
192 \texttt{\textbackslash command[key, key=value]\textit{(location)(name)\{label\}}}
193
194 \begin{itemize}
195 \item \texttt{command} is the name of the command. All are prefixed with \texttt{Mil}-, and end with \texttt{Air}, \texttt{Missile}, \texttt{Land}, \texttt{Equipment}, \texttt{Installation}, \texttt{SeaSurface}, \texttt{SeaSubsurface}, \texttt{Mine}, \texttt{Space}, \texttt{Debris} and\\ \texttt{Activity}. These mostly correspond to the categories found in \DocLink, except for \texttt{Missile}, \texttt{Mine} and \texttt{Debris}, which have been broken off from \texttt{Air}, \texttt{SeaSubsurface} and \texttt{Space} for convenience. The \texttt{OwnShip} command is an exception to this rule, and does not have the \texttt{Mil}- prefix.
196
197 \item \texttt{key} and \texttt{key=value} are the options used to build the symbol, such as faction, icons, modifiers, and amplifiers. Keys with no value define boolean switches, such as \texttt{unclear}. Keys with values can have one parameter, such as \texttt{faction}, or two parameters, such as \texttt{speed leader}. In the latter case, the syntax is \texttt{key=\{value1\}\{value2\}}.
198 \item \texttt{location} is an optional coordinate or coordinate reference to place the symbol. This is generally needed when placing multiple symbols in one \texttt{tikzpicture}.
199 \item \texttt{name} is an optional reference label that acts just like the \texttt{name} property of a node in TikZ. It exposes standard rectangle node anchors such as \texttt{north} and \texttt{south}, allowing connectors to be drawn between symbols. This is useful when drawing organisation charts and similar (see Example \ref{org}).
200 \item \texttt{label} is an optional text label that is added to the right of the symbol.
201 \end{itemize}
202
203 \subsubsection{Shared Keys}
204
205 These are all the keys that are shared by multiple \MilSymb\ commands. Not all keys are shared by all commands, please see Table \ref{shared} for details about which keys are used by which commands.
206
207 \begin{table}[H]
208 \centering
209 \begin{tabular}{|c|c|c|c|c|c|c|c|c|c|c|c|c|}
210 \hline
211 \multirow{10}{*}{\thead{Command}} & \multicolumn{12}{c|}{\thead{Shared Key}} \\ \cline{2-13}
212 & \rotatebox{90}{\thead{\texttt{faction}}} & \rotatebox{90}{\thead{\texttt{main}}} & \rotatebox{90}{\thead{\texttt{upper}}} & \rotatebox{90}{\thead{\texttt{lower}}} & \rotatebox{90}{\thead{\texttt{frame status}}} & \rotatebox{90}{\thead{\texttt{monochrome}}} & \rotatebox{90}{\thead{\texttt{scale}}} & \rotatebox{90}{\thead{\texttt{no frame}}} & \rotatebox{90}{\thead{\texttt{speed leader}}} & \rotatebox{90}{\thead{\texttt{offset, movement}}~} & \rotatebox{90}{\thead{\texttt{feint or dummy}}} & \rotatebox{90}{\thead{\texttt{headquarters}}}\\ \hline
213 \texttt{MilAir} & & & & & & & & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} \\ \hline
214 \texttt{MilMissile} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & & & & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black}\\ \hline
215 \texttt{MilLand} & & & & & & & & \cellcolor{black} & \cellcolor{black} & & & 2 \\ \hline
216 \texttt{MilEquipment} & & & \cellcolor{black} & \cellcolor{black} & 1 & & & & \cellcolor{black} & & & \cellcolor{black} \\ \hline
217 \texttt{MilInstallation} & & & & \cellcolor{black} & & & & \cellcolor{black} & \cellcolor{black} & & & 2\\ \hline
218 \texttt{MilSeaSurface} & & & & & & & & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black}& \cellcolor{black}\\ \hline
219 \texttt{MilSeaSubSurface} & & & & & & & & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black}\\ \hline
220 \texttt{MilMine} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & 1 & & & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} \\ \hline
221 \texttt{MilSpace} & & & & & & & & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black}\\ \hline
222 \texttt{MilActivity} & & & & \cellcolor{black} & & & & \cellcolor{black} & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black}\\ \hline
223 \texttt{MilDebris} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black}\\ \hline
224 \texttt{OwnShip} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black} & \cellcolor{black}\\ \hline
225 \end{tabular}
226 \begin{tablenotes}
227 \item \textsuperscript{1}Not functional when the \texttt{no frame} option is used.
228 \item \textsuperscript{2}Only functional when \texttt{faction=friendly}.
229 \end{tablenotes}
230 \caption{Table of which keys are used in which commands.}
231 \label{shared}
232 \end{table}
233
234 \paragraph{\texttt{main}}
235
236 This key defines the icon to use in the centre of the frame. See the individual command icon and modifier tables for the list of available values.
237
238 \paragraph{\texttt{upper}}
239
240 This key defines the modifier to use above the icon defined by \texttt{main}. See the individual command icon and modifier tables for the list of available values.
241
242 \paragraph{\texttt{lower}}
243
244 This key defines the modifier to use below the icon defined by \texttt{main}. See the individual command icon and modifier tables for the list of available values.
245
246 \paragraph{\texttt{frame status}}
247
248 This key modifies the border of the frame to allow for the expression of both the full set of \lq\lq{}standard identities\rq\rq{}, and the planned status as seen in \DocLink. The \texttt{unclear} value creates a black and white dotted line to display the alternate identities of each faction (assumed friend for friendly, suspect for hostile and pending for unknown, neutral should not use this value). The \texttt{anticipated} value create a longer dashed line to display the planned status. If the \texttt{frame status} key is not set, a standard solid border is used.
249
250 \begin{figure}[H]
251 \centering
252 \begin{tikzpicture}
253 \matrix[column sep=5mm, row sep=5mm]{
254 \MilLand[faction=friendly, main=signal radio teletype centre, frame status=normal, scale=2] & \MilLand[faction=friendly, main=signal radio teletype centre, frame status=uncertain, scale=2] & \MilLand[faction=friendly, main=signal radio teletype centre, frame status=anticipated, scale=2]\\
255 \node{normal}; & \node{\texttt{frame status=unclear}}; & \node{\texttt{frame status=anticipated}}; \\
256 };
257 \end{tikzpicture}
258 \caption{Example of the \texttt{frame status} key in use.}
259 \end{figure}
260
261
262 \paragraph{\texttt{faction}}
263
264 This key selects the military faction of the symbol relative to the user, which determines the colour and shape of the frame, or the colour of the icon and modifiers if \texttt{no frame} is specified. The values available are \texttt{friendly}, \texttt{hostile}, \texttt{neutral} and \texttt{unknown}.
265
266 \begin{table}[H]
267 \centering
268 \begin{tabular}{|c|c|c|c|c|}
269 \hline
270 \multirow{2.5}{*}{\thead{Command}} & \multicolumn{4}{c|}{\thead{Faction Frame}} \\ \cline{2-5}
271 & \thead{Friendly} & \thead{Hostile} & \thead{Neutral} & \thead{Unknown}\\
272 \hline
273 \texttt{MilAir} + \texttt{MilMissile} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilAir[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilAir[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilAir[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilAir[faction=unknown]}}\\
274 \hline
275 \texttt{MilLand} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown]}}\\
276 \hline
277 \texttt{MilEquipment}* + \texttt{MilSeaSurface} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilEquipment[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilEquipment[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilEquipment[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown]}}\\
278 \hline
279 \texttt{MilInstallation} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilInstallation[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilInstallation[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilInstallation[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilInstallation[faction=unknown]}}\\
280 \hline
281 \texttt{MilSeaSubsurface} + \texttt{MilMine}* & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSeaSubsurface[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSeaSubsurface[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSeaSubsurface[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSeaSubsurface[faction=unknown]}}\\
282 \hline
283 \texttt{MilSpace} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSpace[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSpace[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSpace[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilSpace[faction=unknown]}}\\
284 \hline
285 \texttt{MilActivity} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilActivity[faction=friendly]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilActivity[faction=hostile]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilActivity[faction=neutral]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilActivity[faction=unknown]}}\\
286 \hline
287 \end{tabular}
288 \begin{tablenotes}
289 \item \qquad \quad *Can be used without a frame using the \texttt{no frame} option.
290 \end{tablenotes}
291 \caption{Table of all the \MilSymb\ command frames.}
292 \end{table}
293
294 \paragraph{\texttt{monochrome}}
295
296 This boolean switch key allows the symbol to be generated in a monochrome format. All faction colours are instead rendered as an off-white colour as specified in \DocLink.
297
298 \begin{figure}[H]
299 \centering
300 \begin{tikzpicture}
301 \matrix[column sep=5mm, row sep=5mm]{
302 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2] & \MilLand[faction=friendly, main=signal radio teletype centre, monochrome, scale=2]\\
303 \node{normal}; & \node{\texttt{monochrome}}; \\
304 };
305 \end{tikzpicture}
306 \caption{Example of the \texttt{monochrome} key in use.}
307 \end{figure}
308
309 \paragraph{\texttt{scale}}
310
311 This key allows you to scale the resulting symbol by a multiple. By default (\texttt{scale=1}) the boundary octagon is precisely 1cm in diameter.
312
313 \begin{figure}[H]
314 \centering
315 \begin{tikzpicture}
316 \matrix[column sep=5mm, row sep=5mm]{
317 \MilLand[faction=friendly, main=signal radio teletype centre, scale=0.5] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=1] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2]\\
318 \node{\texttt{scale=0.5}}; & \node{\texttt{scale=1}}; & \node{\texttt{scale=2}}; \\
319 };
320 \end{tikzpicture}
321 \caption{Example of the \texttt{scale} key in use.}
322 \end{figure}
323
324 \paragraph{\texttt{no frame}}
325
326 This boolean switch key allows for specific commands (namely \textbf{\texttt{MilEquipment}} and \textbf{\texttt{MilMine}}) to be used without a faction frame. Instead, the icon and modifiers are recoloured with a fluorescent version of the faction colour, as per \DocLink.
327
328 \begin{figure}[H]
329 \centering
330 \begin{tikzpicture}
331 \matrix[column sep=5mm, row sep=5mm]{
332 \MilEquipment[faction=friendly, main=mine clearing vehicle, mobility=wheeled and tracked, scale=2] & \MilEquipment[faction=friendly, main=mine clearing vehicle, mobility=wheeled and tracked, scale=2, no frame]\\
333 \node{normal}; & \node{\texttt{no frame}}; \\
334 };
335 \end{tikzpicture}
336 \caption{Example of the \texttt{no frame} key in use.}
337 \end{figure}
338
339 \paragraph{\texttt{speed leader} (Amplifier)}
340
341 This key draws a line from the centre of the symbol at a specified heading for a specified length. This is used to denote the speed (length) and direction (heading) of the symbol. This key takes two arguments, the first is the length and the second is the heading, as shown below:\\
342
343 \texttt{speed leader=\{\textit{heading}\}\{\textit{length}\}}\\
344
345 \textit{When using this key along with the \texttt{scale} key, the \texttt{scale} key should be defined first. This is because the \texttt{speed leader} key immediately executes code that uses the \texttt{scale} key.}
346
347 \begin{figure}[H]
348 \centering
349 \begin{tikzpicture}
350 \matrix[column sep=5mm, row sep=5mm]{
351 \MilAir[faction=friendly, main=military rotary wing, speed leader={35}{3}, scale=2] & \MilAir[faction=friendly, main=military rotary wing, speed leader={118}{4}, scale=2] & \MilAir[faction=friendly, main=military rotary wing, speed leader={335}{2}, scale=2] \\
352 \node{\texttt{speed leader=\{35\}\{3\}}}; & \node{\texttt{speed leader=\{118\}\{4\}}}; & \node{\texttt{speed leader=\{335\}\{2\}}}; \\
353 };
354 \end{tikzpicture}
355 \caption{Example of the \texttt{speed leader} key in use.}
356 \end{figure}
357
358 \paragraph{\texttt{offset}, \texttt{movement} (Amplifier)}
359
360 This key draws a \lq\lq{}leader line\rq\rq{} down from the centre of the symbol, then another to a specified position \textit{offset} from the centre of the symbol. The \texttt{offset} key should be used to denote precise location, and the \texttt{movement} key should be used to indicate direction of movement (in the case of the \texttt{movement} key, the line is tipped by an arrow). \textit{They should not be used simultaneously.} This key takes two arguments, each enclosed in curly braces, the first is the length of the \lq\lq{}leader line\rq\rq{} extending below the symbol, then the second is a pair of TikZ coordinates (with no brackets) indicating the specified position \textit{offset} from the centre of the symbol, as shown below:\\
361
362 \texttt{offset=\{\textit{leader length}\}\{\textit{offset}\}}\\
363 \indent\texttt{movement=\{\textit{leader length}\}\{\textit{offset}\}}
364
365 \begin{figure}[H]
366 \centering
367 \begin{tikzpicture}
368 \matrix[column sep=5mm, row sep=5mm]{
369 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, offset={3}{2,-4}] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, movement={4}{2,-2}] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, offset={2}{-2,-2}] \\
370 \node{\texttt{offset=\{3\}\{2,-4\}}}; & \node{\texttt{ movement=\{4\}\{2,-2\}}}; & \node{\texttt{offset=\{2\}\{-2,-2\}}}; \\
371 };
372 \end{tikzpicture}
373 \caption{Example of the \texttt{offset} and \texttt{movement} key in use.}
374 \end{figure}
375
376 \paragraph{\texttt{feint or dummy} (Amplifier)}
377
378 This boolean switch key draws the \textit{feint or dummy} amplifier on the symbol. See \DocLink\ for further information about its use.
379
380 \begin{figure}[H]
381 \centering
382 \begin{tikzpicture}
383 \matrix[column sep=5mm, row sep=5mm]{
384 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, feint or dummy] \\
385 \node{normal}; & \node{\texttt{feint or dummy}}; \\
386 };
387 \end{tikzpicture}
388 \caption{Example of the \texttt{feint or dummy} key in use.}
389 \end{figure}
390
391 \paragraph{\texttt{headquarters} (Amplifier)}
392
393 This key draws a line down from the south east corner of a \texttt{friendly} \textbf{\texttt{MilLand}} or \textbf{\texttt{MilInstallation}} frame, and then an optional text field below the frame. This is used to denote if the symbol is stationed at a headquarters or some other kind of military base. The key can be provided with no value, which will produce a blank headquaters amplifer, which is a line drawn downwards from the south-west of the symbol frame, or with a set of values that insert acronyms next to the line. Table \ref{headquarters} lists all the options available.
394
395 \begin{table}[H]
396 \centering
397 \begin{tabular}{|l|c|}
398 \hline
399 \thead{Value} & \thead{Acronym} \\ \hline
400 \texttt{assault command post} & ASLT \\ \hline
401 \texttt{command group} & CMD \\ \hline
402 \texttt{forward command post} & FWD \\ \hline
403 \texttt{main command post} & MAIN \\ \hline
404 \texttt{rear command post} & REAR \\ \hline
405 \texttt{tactical operations centre} & TOC \\ \hline
406 \texttt{tactical command post} & TAC \\ \hline
407 \end{tabular}
408 \caption{Headquarters acronyms.}
409 \label{headquarters}
410 \end{table}
411
412 \begin{figure}[H]
413 \centering
414 \begin{tikzpicture}
415 \matrix[column sep=5mm, row sep=5mm]{
416 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, headquarters] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, headquarters=tactical operations centre] \\
417 \node{\texttt{headquarters} (no value)}; & \node{\texttt{headquarters=tactical operations centre}};\\
418 };
419 \end{tikzpicture}
420 \caption{Example of the \texttt{headquarters} key in use.}
421 \end{figure}
422
423
424 \subsubsection{Text Fields}
425
426 Most \MilSymb\ commands (apart from \textbf{\texttt{MilDebris}} and \textbf{\texttt{OwnShip}}) have a set of text amplifiers that go around the edge of the symbol. These are set by individually named keys specified in the \textbf{Text Fields} subheading of each command entry. Some symbols have multiple text fields in the same location, be default no spaces are inserted between these fields, so spaces must be entered manually as appropriate.
427
428 \subsubsection{Full Frame Icons}
429
430 In some commands (\textbf{\texttt{MilLand}}, \textbf{\texttt{MilInstallation}} and \textbf{\texttt{MilActivity}}) some icons (as set by \texttt{main}) will take up the entire frame. These are referred to as \lq\lq{}full frame\rq\rq{} icons. Modifiers (as set by \texttt{upper} and \texttt{lower}) should not be used when a full frame icon has been selected.
431
432 \subsubsection{Grouping}
433
434 For \textbf{\texttt{MilLand}} and \textbf{\texttt{MilInstallation}} symbols with the \texttt{faction} key set to \texttt{friendly}, there is the option to group several commands together to indicate several entities in one location. \MilSymb\ provides two \LaTeX\ environments to achieve this, \textbf{\texttt{landgroup}} and \textbf{\texttt{landheadquarters}}. \textbf{\texttt{landgroup}} is designed to be used with normal \textbf{\texttt{MilLand}} symbols, and \textbf{\texttt{landheadquarters}} is designed to be used with symbols that have a headquarters amplifier. Within the environments, each command should be the argument inside an \texttt{\textbackslash item\{...\}} command (note that it is not the same as the \texttt{\textbackslash item} that is used in bulleted and numbered lists in \LaTeX\ , it has an argument in curly braces rather than just a command). \textit{Do not use the \texttt{scale} key within a \MilSymb\ command when grouping them. Instead, use the \texttt{scale} key at the environment level.} See this example:\\
435
436 \begin{writett}
437 \begin{verbatim}
438 \begin{landgroup}[scale=2]
439 \item{\MilLand[faction=friendly,
440 main=signal radio teletype centre,
441 echelon=section]}
442 \item{\MilLand[faction=friendly,
443 main=diving,
444 upper=video imagery,
445 echelon=brigade,
446 status=reduced]}
447 \item{\MilLand[faction=friendly,
448 main=sensor,
449 upper=large extension node,
450 lower=single channel]}
451 \end{landgroup}
452 \end{verbatim}
453 \end{writett}
454
455 \begin{figure}[H]
456 \centering
457 \begin{tikzpicture}
458 \matrix[column sep=5mm, row sep=5mm]{
459 \begin{landgroup}[scale=2]
460 \item{\MilLand[faction=friendly, main=signal radio teletype centre, echelon=section]}
461 \item{\MilLand[faction=friendly, main=diving, upper=video imagery, echelon=brigade, status=reduced]}
462 \item{\MilLand[faction=friendly, main=sensor, upper=large extension node, lower=single channel]}
463 \end{landgroup}
464 &
465 \begin{landheadquarters}[scale=2]
466 \item{\MilLand[faction=friendly, main=signal radio teletype centre, echelon=section, headquarters=command group]}
467 \item{\MilLand[faction=friendly, main=diving, upper=video imagery, echelon=brigade, status=reduced, headquarters=command group]}
468 \item{\MilLand[faction=friendly, main=sensor, upper=large extension node, lower=single channel, headquarters=command group]}
469 \end{landheadquarters} \\
470 \node {\textbf{\texttt{landgroup}}}; & \node{\textbf{\texttt{landheadquarters}}}; \\
471 };
472 \end{tikzpicture}
473 \caption{Example of \textbf{\texttt{landgroup}} and \textbf{\texttt{landheadquarters}} grouping.}
474 \end{figure}
475
476 \newpage\subsection{Air Command (\textbf{\texttt{MilAir}})}
477
478 This command covers symbols for air assets and their activities. Refer to \textit{Chapter 2, Section 2 and 3} in \DocLink\ for further information.
479
480 \subsubsection{Icons and Modifiers}
481
482 \paragraph{\texttt{main}}\quad
483 \pyc{print(symbol_tables["Air_main"])}
484
485 \newpage\paragraph{\texttt{upper}}\quad
486 \pyc{print(symbol_tables["Air_upper"])}
487
488 \newpage\paragraph{\texttt{lower}}\quad
489 \pyc{print(symbol_tables["Air_lower"])}
490
491 \subsubsection{Amplifiers}
492
493 \paragraph{Text Fields}
494
495 \textbf{\texttt{MilAir}} has 5 text field amplifiers, as shown in Figure \ref{airtext}. Table \ref{airtexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
496
497 \begin{figure}[H]
498 \centering
499 \begin{tikzpicture}
500 \MilAir[faction=friendly, main=military rotary wing, scale=2, track number=\qquad A, call sign=\qquad B, position and movement=\qquad C, nation=\qquad D, additional information=\qquad E]
501 \end{tikzpicture}
502 \caption{Location of \textbf{\texttt{MilAir}} text field amplifiers.}
503 \label{airtext}
504 \end{figure}
505
506 \begin{table}[H]
507 \centering
508 \begin{tabularx}{\textwidth}{|c|l|X|c|}
509 \hline
510 \thead{Location} & \thead{Key} & \thead{Description} & \thead{Prefix*}\\ \hline
511 \textbf{A} & \texttt{track number} & System Track Number. & TN \\ \hline
512 \textbf{B} & \texttt{call sign} & Airframe Number or Mission Call Sign. & \\ \hline
513 \textbf{C} & \texttt{position and movement} & Course [degrees]/Speed [knots] or Bearing [degrees]/Distance [nautical miles] Height [feet/flight level]. & C/S, B/D \\ \hline
514 \textbf{D} & \texttt{nation} & Nation\rq{}s Name: A 3-letter code indicating the object\rq{}s country of origin (STANAG 1059). & \\ \hline
515 \textbf{E} & \texttt{additional information} & For friendly units: Sensor or Weapon load, endurance, etc. For other Units: Credibility of Information. & \\ \hline
516 \end{tabularx}
517 \begin{tablenotes}
518 \item *when applicable.
519 \end{tablenotes}
520 \caption{Description of \textbf{\texttt{MilAir}} text field amplifiers.}
521 \label{airtexttable}
522 \end{table}
523
524 \newpage\subsection{Missile Command (\textbf{\texttt{MilMissile}})}
525
526 This command is a special application of \textbf{\texttt{MilAir}} for missiles. \textit{Instead of setting an icon using \texttt{main}, a predefined \lq\lq{}missile\rq\rq{} icon is used. Modifiers are then added to the left and right instead of above and below.} Refer to \textit{Chapter 2, Section 4} in \DocLink\ for further information.
527
528 \subsubsection{Modifiers}
529
530 \textit{Instead of using \texttt{upper} and \texttt{lower} keys to define the modifiers, \texttt{left} and \texttt{right} keys are used to reflect the position of the modifier.}
531
532 \paragraph{\texttt{left}}\quad
533 \pyc{print(symbol_tables["Missile_left"])}
534
535 \newpage\paragraph{\texttt{right}}\quad
536 \pyc{print(symbol_tables["Missile_right"])}
537
538 \subsubsection{Amplifiers}
539
540 \paragraph{Text Fields}
541
542 Text fields for \textbf{\texttt{MilMissile}} are identical to \textbf{\texttt{MilAir}}.
543
544 \newpage\subsection{Land Command (\textbf{\texttt{MilLand}})}
545
546 This command covers symbols for land units, individuals, and organizations. Refer to \textit{Chapter 3, Section 2} in \DocLink\ for further information.
547
548 \subsubsection{Icons and Modifiers}
549
550 \paragraph{\texttt{main}}\quad
551 \pyc{print(symbol_tables["Land_main"])}
552
553 \newpage\paragraph{\texttt{upper}}\quad
554 \pyc{print(symbol_tables["Land_upper"])}
555
556 \newpage\paragraph{\texttt{lower}}\quad
557 \pyc{print(symbol_tables["Land_lower"])}
558
559 \subsubsection{Amplifiers}
560
561 \paragraph{Echelon}
562
563 This amplifier denotes the \lq\lq{}level of command\rq\rq{} of the symbol (in the case of infantry this usually denotes the size of the unit). Table \ref{echelon} lists all the options available.
564
565 \begin{table}[H]
566 \centering
567 \begin{tabular}{|l|c|}
568 \hline
569 \thead{Value} & \thead{Symbol} \\ \hline
570 \texttt{team} & $\varnothing$ \\ \hline
571 \texttt{squad} & \textbullet \\ \hline
572 \texttt{section} & \textbullet \ \textbullet \\ \hline
573 \texttt{platoon} & \textbullet \ \textbullet \ \textbullet \\ \hline
574 \texttt{company} & \textbar \\ \hline
575 \texttt{battalion} & \textbar \ \textbar \\ \hline
576 \texttt{regiment} & \textbar \ \textbar \ \textbar \\ \hline
577 \texttt{brigade} & X \\ \hline
578 \texttt{division} & XX \\ \hline
579 \texttt{corps} & XXX \\ \hline
580 \texttt{army} & XXXX\\ \hline
581 \texttt{army group} & XXXXX \\ \hline
582 \texttt{theatre} & XXXXXX \\ \hline
583 \texttt{command} & \raisebox{1pt}{+ \ +} \\ \hline
584 \end{tabular}
585 \caption{Echelon levels and corresponding symbols.}
586 \label{echelon}
587 \end{table}
588
589 \begin{figure}[H]
590 \centering
591 \begin{tikzpicture}
592 \matrix[column sep=5mm, row sep=5mm]{
593 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, echelon=section] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, echelon=regiment] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, echelon=army] \\
594 \node{\texttt{echelon=section}}; & \node{\texttt{echelon=regiment}}; & \node{\texttt{echelon=army}}; \\
595 };
596 \end{tikzpicture}
597 \caption{Example of the \texttt{echelon} key in use.}
598 \end{figure}
599
600 \paragraph{Task Force}
601
602 This amplifier denotes a temporary unit for a specific task or objective. If the \texttt{echelon} key is set, it will automatically size to enclose the echelon amplifier.
603
604 \begin{figure}[H]
605 \centering
606 \begin{tikzpicture}
607 \matrix[column sep=5mm, row sep=5mm]{
608 \MilLand[faction=friendly, main=signal radio teletype centre, echelon=platoon, scale=2] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, echelon=platoon, task force] \\
609 \node{normal}; & \node{\texttt{task force}}; \\
610 };
611 \end{tikzpicture}
612 \caption{Example of the \texttt{task force} key in use.}
613 \end{figure}
614
615
616 \paragraph{Status}
617
618 This amplifier denotes the condition of the of the symbol. There are 3 options, \texttt{reinforced} indicates part of another unit is augmenting the capability of this unit, \texttt{reduced} means part of the unit has been detached to augment another unit, and \texttt{reinforced and reduced} means both situations have occurred. If this key is specified, the text field adjacent to it will be shifted right in order to accommodate the amplifier.
619
620 \begin{figure}[H]
621 \centering
622 \begin{tikzpicture}
623 \matrix[column sep=5mm, row sep=5mm]{
624 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, status=reinforced] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, status=reduced] & \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, status=reinforced and reduced] \\
625 \node{\texttt{status=reinforced}}; & \node{\texttt{status=reduced}}; & \node{\texttt{status=reinforced and reduced}}; \\
626 };
627 \end{tikzpicture}
628 \caption{Example of the \texttt{status} key in use.}
629 \end{figure}
630
631 \paragraph{Text Fields}
632
633 \textbf{\texttt{MilLand}} has 14 text field amplifiers, as shown in Figure \ref{equiptext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{landtexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
634
635 \begin{figure}[H]
636 \centering
637 \begin{tikzpicture}
638 \MilLand[faction=friendly, main=signal radio teletype centre, scale=2, staff comments=\qquad G, additional information=\qquad H, higher formation=\qquad M, evaluation rating=\qquad J, country indicator=\qquad AC, combat effectiveness=\textbackslash K, identification=\textbackslash P, unique designation=T\qquad~, type of equipment=\qquad V, date-time group=W\qquad~, altitude value=X, location=\textbackslash Y\qquad~, common identifier=\textbackslash AF\qquad~, speed=Z\qquad~]
639 \end{tikzpicture}
640 \caption{Location of \textbf{\texttt{MilLand}} text field amplifiers.}
641 \label{landtext}
642 \end{figure}
643
644 \begin{center}
645 \begin{tabularx}{\textwidth}{|c|l|X|}
646 \hline
647 \thead{Location} & \thead{Key} & \thead{Description} \\ \hline
648 \textbf{AC} & \texttt{country indicator} & A three-letter code that indicates the country of origin of the unit (STANAG 1059). In stability activities, this field can be used for factions or groups.\\ \hline
649 \textbf{G} & \texttt{staff comments} & Free text. Can be used by staff for information required by commander.\\ \hline
650 \textbf{H} & \texttt{additional information} & Free Text.\\ \hline
651 \textbf{M} & \texttt{higher formation} & Number or title of higher echelon command of unit being displayed. \\ \hline
652 \textbf{J} & \texttt{evaluation rating} & Degree of confidence that may be placed on the information represented by the symbol. It is shown as one letter and one number made up of Reliability of Source and Credibility of Information. (STANAG 2511). \newline
653 Reliability of Source:
654 \begin{enumerate}[label=\Alph*., align=left]
655 \item Completely reliable.
656 \item Usually reliable.
657 \item Fairly reliable.
658 \item Not usually reliable.
659 \item Unreliable.
660 \item Reliability cannot be judged.
661 \end{enumerate}
662 Credibility of Information:
663 \begin{enumerate}[label=\arabic*., align=left]
664 \item Confirmed by other sources.
665 \item Probably true.
666 \item Possibly true.
667 \item Doubtful.
668 \item Improbable.
669 \item Truth cannot be judged.
670 \end{enumerate}
671 \\ \hline
672 \textbf{K} & \texttt{combat effectiveness} & Effectiveness of unit or equipment displayed.
673 \begin{enumerate}[label=\arabic*., align=left]
674 \item Fully operational.
675 \item Substantially operational.
676 \item Marginally operational.
677 \item Not operational.
678 \end{enumerate} \\ \hline
679 \textbf{P} & \texttt{identification} & Identification modes and codes.\\ \hline
680 \textbf{W} & \texttt{date-time group} & An alphanumeric designator for displaying a date-time group (DDHHMMSSZMONYY) or \lq\lq{}O/O\rq\rq{} for on order. The date-time group is composed of a group of six numeric digits with a time zone suffix and the standardized three-letter abbreviation for the month followed by two digits. The first pair of digits represents the day; the second pair, the hour; the third pair, the minutes. The last two digits of the year are after the month. For automated systems, two digits may be added before the time zone suffix and after the minutes to designate seconds.\\ \hline
681 \textbf{X} & \texttt{altitude value} & Altitude as displayed on the global positioning system (GPS). \\ \hline
682 \textbf{Y} & \texttt{location} & Latitude and longitude; grid coordinates. \\ \hline
683 \textbf{AF} & \texttt{common identifier} & Example: Paladin for the M109A6 howitzer or Leopard for the KPz-70 tank. (Use NATO code name for hostile common identifiers.) \\ \hline
684 \textbf{Z} & \texttt{speed} & Displays speed in nautical miles per hour or kilometres per hour. \\ \hline
685 \multicolumn{3}{c}{}\\
686 \caption{Description of \textbf{\texttt{MilLand}} text field amplifiers.}
687 \label{landtexttable}
688 \end{tabularx}
689 \end{center}
690
691 \subsubsection{Supply Icons}
692
693 An additional set of fullframe \textbf{\texttt{MilLand}} icons are used to denote classes of supply. \MilSymb\ uses an additional \texttt{supply} key to construct these icons, which takes up to two values each enclosed in curly braces.\textit{If only one value is used, then there must be a set of empty curly braces (\{\}) after the first value}. Each value is a supply class number, as listed in Table \ref{supply}. The US uses different symbols and designations for their supply classes, their supply class numbers are prefixed with \texttt{US } (including the space). When one value is set, the symbol from the table will be used, and when two values are set, the roman numeral for the supply class is used, with an ampersand (\&) inserted between the numerals. \textit{This key should be used in place of the \texttt{main} key.}
694
695 \begin{center}
696 \begin{longtable}{|l|c|c|c|c|c|c|}
697 \hline
698 \thead{Value} & \rotatebox{90}{\thead{Roman Numeral}~} & \thead{Glyph} & \multicolumn{4}{c|}{\thead{Examples}}\\ \hline
699 \texttt{all}* & N/A & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={all}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={all}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={all}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={all}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={all}{}]}}\\ \hline
700 \multicolumn{7}{|c|}{\thead{NATO Supply Classes}}\\ \hline
701 \texttt{1} & I & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={1}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={1}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={1}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={1}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={1}{}]}}\\ \hline
702 \texttt{2} & II & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={2}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={2}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={2}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={2}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={2}{}]}}\\ \hline
703 \texttt{3} & III & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={3}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={3}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={3}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={3}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={3}{}]}}\\ \hline
704 \texttt{4} & IV & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={4}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={4}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={4}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={4}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={4}{}]}}\\ \hline
705 \texttt{5} & V & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={5}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={5}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={5}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={5}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={5}{}]}}\\ \hline
706 \multicolumn{7}{|c|}{\thead{US Supply Classes}} \\ \hline
707 \texttt{US 1} & I & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 1}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 1}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 1}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 1}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 1}{}]}}\\ \hline
708 \texttt{US 2} & II & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 2}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 2}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 2}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 2}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 2}{}]}}\\ \hline
709 \texttt{US 3} & III & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 3}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 3}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 3}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 3}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 3}{}]}}\\ \hline
710 \texttt{US 4} & IV & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 4}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 4}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 4}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 4}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 4}{}]}}\\ \hline
711 \texttt{US 5} & V & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 5}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 5}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 5}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 5}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 5}{}]}}\\ \hline
712 \texttt{US 6} & VI & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 6}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 6}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 6}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 6}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 6}{}]}}\\ \hline
713 \texttt{US 7} & VII & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 7}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 7}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 7}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 7}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 7}{}]}}\\ \hline
714 \texttt{US 8} & VIII & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 8}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 8}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 8}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 8}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 8}{}]}}\\ \hline
715 \texttt{US 9} & IX & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 9}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 9}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 9}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 9}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 9}{}]}}\\ \hline
716 \texttt{US 10} & X & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=none, supply={US 10}{}]}}& \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=friendly, supply={US 10}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=hostile, supply={US 10}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=neutral, supply={US 10}{}]}}&\adjustbox{valign=m,margin=0.25cm}{\tikz{\MilLand[faction=unknown, supply={US 10}{}]}}\\\hline
717 \multicolumn{7}{c}{}\\
718 \caption{Table of Supply Icons.}
719 \label{supply}
720 \end{longtable}
721 \begin{tablenotes}
722 \item *can only be used as a single value.
723 \end{tablenotes}
724 \end{center}
725
726 \begin{figure}[H]
727 \centering
728 \begin{tikzpicture}
729 \matrix[column sep=5mm, row sep=5mm]{
730 \MilLand[faction=friendly, supply={1}{5}, scale=2] & \MilLand[faction=friendly, supply={US 8}{}, scale=2] & \MilLand[faction=friendly, supply={3}{}, scale=2] \\
731 \node{\texttt{supply=\{1\}\{5\}}}; & \node{\texttt{supply=\{US 8\}\{\}}}; & \node{\texttt{supply=\{3\}\{\}}}; \\
732 };
733 \end{tikzpicture}
734 \caption{Example of Supply symbols.}
735 \end{figure}
736
737
738 \subsubsection{Altitude Modifier}
739
740 \textbf{\texttt{MilLand}} defines a special lower modifier for altitude, which takes up to two values each enclosed in curly braces.\textit{If only one value is used, then there must be a set of empty curly braces (\{\}) after the first value}. Each value is an altitude designation, \texttt{high} (HA), \texttt{medium} (MA) and \texttt{low} (LA), which inserts the acronym. Having two values will insert a slash (/) between them and removes the \lq\lq{}A\rq\rq{} suffix from the first acronym. \textit{This key should be used in place of the \texttt{lower} key.}
741
742 \begin{figure}[H]
743 \centering
744 \begin{tikzpicture}
745 \matrix[column sep=5mm, row sep=5mm]{
746 \MilLand[faction=friendly, main=unmanned systems, scale=2, altitude={high}{}] & \MilLand[faction=friendly, main=unmanned systems, scale=2, altitude={medium}{low}] & \MilLand[faction=friendly, main=unmanned systems, scale=2, altitude={low}{}] \\
747 \node{\texttt{altitude=\{high\}\{\}}}; & \node{\texttt{altitude=\{medium\}\{low\}}}; & \node{\texttt{altitude=\{low\}\{\}}}; \\
748 };
749 \end{tikzpicture}
750 \caption{Example of the \texttt{altitude} key in use.}
751 \end{figure}
752
753 \newpage\subsection{Equipment Command (\textbf{\texttt{MilEquipment}})}
754
755 This command covers symbols for land equipment. \textit{The are no \texttt{upper} and \texttt{lower} keys, instead a \texttt{mobility} key sets a modifier to be displayed below the frame (or when the \texttt{no frame} key is set, adjacent to the bottom of the icon)}. This command also accepts the \texttt{no frame} key. See \textit{Chapter 3, Section 3} in \DocLink.
756
757 \subsubsection{Icons and Modifiers}
758
759 \paragraph{\texttt{Main}}\quad
760 \pyc{print(symbol_tables["Equipment_main"])}
761
762 \newpage\paragraph{\texttt{Mobility}}\quad
763 \pyc{print(symbol_tables["Equipment_mobility"])}
764
765 \subsubsection{Amplifiers}
766
767 \paragraph{Text Fields}
768
769 \textbf{\texttt{MilEquipment}} has 16 text field amplifiers, as shown in Figure \ref{equiptext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{equiptexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
770
771 \begin{figure}[H]
772 \centering
773 \begin{tikzpicture}
774 \MilEquipment[faction=friendly, main=mine clearing vehicle, mobility=wheeled and tracked, scale=2, quantity=Q, staff comments=\qquad G, additional information=\qquad H, evaluation rating=\qquad J, combat effectiveness=\textbackslash K, signature equipment=\textbackslash SE, higher formation=\qquad M, identification=\textbackslash P, unique designation=T\qquad~, type of equipment=V, date-time group=W\qquad~, altitude value=X, location=\textbackslash Y\qquad~, country indicator=\qquad AC, platform type=\textbackslash AD, equipment teardown time=\textbackslash AE, common identifier=\textbackslash AF\qquad~, speed=Z\qquad~]
775 \end{tikzpicture}
776 \caption{Location of \textbf{\texttt{MilEquipment}} text field amplifiers.}
777 \label{equiptext}
778 \end{figure}
779
780 \begin{center}
781 \begin{tabularx}{\textwidth}{|c|l|X|}
782 \hline
783 \thead{Location} & \thead{Key} & \thead{Description} \\ \hline
784 \textbf{Q} & \texttt{quantity} & Identifies the number of items present.\\ \hline
785 \textbf{AC} & \texttt{country indicator} & A three-letter code that indicates the country of origin of the unit (STANAG 1059). In stability activities, this field can be used for factions or groups.\\ \hline
786 \textbf{G} & \texttt{staff comments} & Free text. Can be used by staff for information required by commander.\\ \hline
787 \textbf{H} & \texttt{additional information} & Free Text.\\ \hline
788 \textbf{M} & \texttt{higher formation} & Number or title of higher echelon command of unit being displayed. \\ \hline
789 \textbf{J} & \texttt{evaluation rating} & Degree of confidence that may be placed on the information represented by the symbol. It is shown as one letter and one number made up of Reliability of Source and Credibility of Information. (STANAG 2511). \newline
790 Reliability of Source:
791 \begin{enumerate}[label=\Alph*., align=left]
792 \item Completely reliable.
793 \item Usually reliable.
794 \item Fairly reliable.
795 \item Not usually reliable.
796 \item Unreliable.
797 \item Reliability cannot be judged.
798 \end{enumerate}
799 Credibility of Information:
800 \begin{enumerate}[label=\arabic*., align=left]
801 \item Confirmed by other sources.
802 \item Probably true.
803 \item Possibly true.
804 \item Doubtful.
805 \item Improbable.
806 \item Truth cannot be judged.
807 \end{enumerate}
808 \\ \hline
809 \textbf{K} & \texttt{combat effectiveness} & Effectiveness of unit or equipment displayed.
810 \begin{enumerate}[label=\arabic*., align=left]
811 \item Fully operational.
812 \item Substantially operational.
813 \item Marginally operational.
814 \item Not operational.
815 \end{enumerate} \\ \hline
816 \textbf{SE} & \texttt{signature equipment} & Identifies a detectable electronic signature \lq\lq{}!\rq\rq{} for hostile equipment. \\ \hline
817 \textbf{P} & \texttt{identification} & Identification modes and codes.\\ \hline
818 \textbf{T} & \texttt{unique designation} & An alphanumeric designator that uniquely identifies a particular model of equipment (number).\\ \hline
819 \textbf{V} & \texttt{type of equipment} & Identifies unique designation (such as AH-64 for attack helicopter).\\ \hline
820 \textbf{W} & \texttt{date-time group} & An alphanumeric designator for displaying a date-time group (DDHHMMSSZMONYY) or \lq\lq{}O/O\rq\rq{} for on order. The date-time group is composed of a group of six numeric digits with a time zone suffix and the standardized three-letter abbreviation for the month followed by two digits. The first pair of digits represents the day; the second pair, the hour; the third pair, the minutes. The last two digits of the year are after the month. For automated systems, two digits may be added before the time zone suffix and after the minutes to designate seconds.\\ \hline
821 \textbf{X} & \texttt{altitude value} & Altitude as displayed on the global positioning system (GPS). \\ \hline
822 \textbf{Y} & \texttt{location} & Latitude and longitude; grid coordinates. \\ \hline
823 \textbf{AF} & \texttt{common identifier} & Example: Paladin for the M109A6 howitzer or Leopard for the KPz-70 tank. (Use NATO code name for hostile common identifiers.) \\ \hline
824 \textbf{Z} & \texttt{speed} & Displays speed in nautical miles per hour or kilometres per hour. \\ \hline
825 \textbf{AD} & \texttt{platform type} & Electronic intelligence notation (ELNOT) or communications intelligence notation (CENOT).\\ \hline
826 \textbf{AE} & \texttt{equipment teardown time} & Equipment teardown time in minutes.\\ \hline
827 \multicolumn{3}{c}{}\\
828 \caption{Description of \textbf{\texttt{MilLand}} text field amplifiers.}
829 \label{equiptexttable}
830 \end{tabularx}
831 \end{center}
832
833 \newpage\subsection{Installation Command (\textbf{\texttt{MilInstallation}})}
834
835 This command covers symbols for land installations, sites that incorporate permanent, semi-permanent, and temporary structures. \textit{The \texttt{lower} key is not used as there are no lower modifiers.} See \textit{Chapter 3, Section 4} in \DocLink.
836
837 \subsubsection{Icons and Modifiers}
838
839 \paragraph{\texttt{Main}}\quad
840 \pyc{print(symbol_tables["Installation_main"])}
841
842 \newpage\paragraph{\texttt{Upper}}\quad
843 \pyc{print(symbol_tables["Installation_upper"])}
844
845 \subsubsection{Amplifiers}
846
847 \paragraph{Text Fields}
848
849 \textbf{\texttt{MilInstallation}} has 12 text field amplifiers, as shown in Figure \ref{installtext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{installtexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
850
851 \begin{figure}[H]
852 \centering
853 \begin{tikzpicture}
854 \MilInstallation[faction=friendly, main=civilian telecommunications, upper=radio, staff comments=\qquad G, additional information= \qquad H, higher formation= \qquad M, evaluation rating=\qquad J, capacity of installation=\textbackslash K, unique designation=T \qquad~, country indicator=\qquad AC, installation composition=AI \qquad~, date-time group=W \qquad~, altitude value=X, location=\textbackslash Y \qquad~, speed=Z \qquad~, installation composition=AI \qquad~, scale=2]
855 \end{tikzpicture}
856 \caption{Location of \textbf{\texttt{MilInstallation}} text field amplifiers.}
857 \label{installtext}
858 \end{figure}
859
860 \begin{center}
861 \begin{tabularx}{\textwidth}{|c|l|X|}
862 \hline
863 \thead{Location} & \thead{Key} & \thead{Description} \\ \hline
864 \textbf{AC} & \texttt{country indicator} & A three-letter code that indicates the country of origin of the unit (STANAG 1059). In stability activities, this field can be used for factions or groups.\\ \hline
865 \textbf{G} & \texttt{staff comments} & Free text. Can be used by staff for information required by commander.\\ \hline
866 \textbf{H} & \texttt{additional information} & Free Text.\\ \hline
867 \textbf{M} & \texttt{higher formation} & Number or title of higher echelon command of unit being displayed. \\ \hline
868 \textbf{J} & \texttt{evaluation rating} & Degree of confidence that may be placed on the information represented by the symbol. It is shown as one letter and one number made up of Reliability of Source and Credibility of Information. (STANAG 2511). \newline
869 Reliability of Source:
870 \begin{enumerate}[label=\Alph*., align=left]
871 \item Completely reliable.
872 \item Usually reliable.
873 \item Fairly reliable.
874 \item Not usually reliable.
875 \item Unreliable.
876 \item Reliability cannot be judged.
877 \end{enumerate}
878 Credibility of Information:
879 \begin{enumerate}[label=\arabic*., align=left]
880 \item Confirmed by other sources.
881 \item Probably true.
882 \item Possibly true.
883 \item Doubtful.
884 \item Improbable.
885 \item Truth cannot be judged.
886 \end{enumerate}
887 \\ \hline
888 \textbf{K} & \texttt{capacity of installation} & Capacity of installation displayed. \\ \hline
889 \textbf{T} & \texttt{unique designation} & An alphanumeric designator that uniquely identifies a particular installation (name).\\ \hline
890 \textbf{W} & \texttt{date-time group} & An alphanumeric designator for displaying a date-time group (DDHHMMSSZMONYY) or \lq\lq{}O/O\rq\rq{} for on order. The date-time group is composed of a group of six numeric digits with a time zone suffix and the standardized three-letter abbreviation for the month followed by two digits. The first pair of digits represents the day; the second pair, the hour; the third pair, the minutes. The last two digits of the year are after the month. For automated systems, two digits may be added before the time zone suffix and after the minutes to designate seconds.\\ \hline
891 \textbf{X} & \texttt{altitude value} & Height in feet of equipment or structure on the ground. \\ \hline
892 \textbf{Y} & \texttt{location} & Latitude and longitude; grid coordinates. \\ \hline
893 \textbf{Z} & \texttt{speed} & Displays speed in nautical miles per hour or kilometres per hour. \\ \hline
894 \textbf{AI} & \texttt{installation composition} & Indicates the component type of the installation:
895 \begin{itemize}
896 \item Development.
897 \item Research.
898 \item Production.
899 \item Service.
900 \item Storage.
901 \item Utility.
902 \end{itemize}\\ \hline
903 \multicolumn{3}{c}{}\\
904 \caption{Description of \textbf{\texttt{MilInstallation}} text field amplifiers.}
905 \label{installtexttable}
906 \end{tabularx}
907 \end{center}
908
909 \newpage\subsection{Sea Surface Command (\textbf{\texttt{MilSeaSurface}})}
910
911 This command covers symbols for units, equipment, and objects of maritime surface operations. See \textit{Chapter 4, Section 1} in \DocLink.
912
913 \subsubsection{Icons and Modifiers}
914
915 \paragraph{\texttt{Main}}\quad
916 \pyc{print(symbol_tables["SeaSurface_main"])}
917
918 \newpage\paragraph{\texttt{Upper}}\quad
919 \pyc{print(symbol_tables["SeaSurface_upper"])}
920
921 \newpage\paragraph{\texttt{Lower}}\quad
922 \pyc{print(symbol_tables["SeaSurface_lower"])}
923
924 \subsubsection{Amplifiers}
925
926 \paragraph{Text Fields}
927
928 \textbf{\texttt{MilSeaSurface}} has 6 text field amplifiers, as shown in Figure \ref{seasurfacetext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{seasurfacetexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
929
930 \begin{figure}[H]
931 \centering
932 \begin{tikzpicture}
933 \MilSeaSurface[faction=friendly, main=law enforcement vessel, scale=2, track number=\qquad A, name=\qquad B, position and movement=\qquad C, identification=\qquad D, additional information=\qquad E, date-time group=\textbackslash F]
934 \end{tikzpicture}
935 \caption{Location of \textbf{\texttt{MilSeaSurface}} text field amplifiers.}
936 \label{seasurfacetext}
937 \end{figure}
938
939 \begin{table}[H]
940 \centering
941 \begin{tabularx}{\textwidth}{|c|l|X|c|}
942 \hline
943 \thead{Location} & \thead{Key} & \thead{Description} & \thead{Prefix*}\\ \hline
944 \textbf{A} & \texttt{track number} & System Track Number. & TN \\ \hline
945 \textbf{B} & \texttt{name} & Ships Name, Hull Number or Task Organization Designator (military only), Mission / International call sign. & \\ \hline
946 \textbf{C} & \texttt{position and movement} & Course [degrees]/Speed [knots] or Bearing [degrees]/Distance [nautical miles]. & C/S, B/D \\ \hline
947 \textbf{D} & \texttt{identification} & Country of origin (STANAG 1059 - 3-letter code) or Organization (e.g. UN, NATO, EU), Any other information (e.g. IFF / AIS). & \\ \hline
948 \textbf{E} & \texttt{additional information} & For friendly units: Sensor or Weapon load, endurance, etc. For other Units: Credibility of Information. & \\ \hline
949 \textbf{F} & \texttt{date-time group} & An alphanumeric designator for displaying a date-time group (DDHHMMSSZMONYY) or \lq\lq{}O/O\rq\rq{} for on order. The date-time group is composed of a group of six numeric digits with a time zone suffix and the standardized three-letter abbreviation for the month followed by two digits. The first pair of digits represents the day; the second pair, the hour; the third pair, the minutes. The last two digits of the year are after the month. For automated systems, two digits may be added before the time zone suffix and after the minutes to designate seconds. & \\ \hline
950 \end{tabularx}
951 \begin{tablenotes}
952 \item *when applicable.
953 \end{tablenotes}
954 \caption{Description of \textbf{\texttt{MilSeaSurface}} text field amplifiers.}
955 \label{seasurfacetexttable}
956 \end{table}
957
958 \subsection{Own Ship Command (\textbf{\texttt{OwnShip}})}
959
960 This command places a marker indicating the position of the vessel the user is on, if they are at sea. No keys are available other than \texttt{scale}. See \textit{Chapter 4, Section 1, Table 4-7} in \DocLink.
961
962 \begin{figure}[H]
963 \centering
964 \tikz{\OwnShip[scale=2]}
965 \caption{\textbf{\texttt{OwnShip}} command symbol.}
966 \end{figure}
967
968 \newpage\subsection{Sea Subsurface Command (\textbf{\texttt{MilSeaSubsurface}})}
969
970 This command covers symbols for units, equipment, and objects of maritime sub surface operations. See \textit{Chapter 4, Section 2} in \DocLink.
971
972 \subsubsection{Icons and Modifiers}
973
974 \paragraph{\texttt{Main}}\quad
975 \pyc{print(symbol_tables["SeaSubsurface_main"])}
976
977 \newpage\paragraph{\texttt{Upper}}\quad
978 \pyc{print(symbol_tables["SeaSubsurface_upper"])}
979
980 \newpage\paragraph{\texttt{Lower}}\quad
981 \pyc{print(symbol_tables["SeaSubsurface_lower"])}
982
983 \subsubsection{Amplifiers}
984
985 \paragraph{Text Fields}
986
987 \textbf{\texttt{MilSeaSuburface}} has 6 text field amplifiers, as shown in Figure \ref{seasubsurfacetext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{seasubsurfacetexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
988
989 \begin{figure}[H]
990 \centering
991 \begin{tikzpicture}
992 \MilSeaSubsurface[faction=friendly, main=torpedo, scale=2, track number=\qquad A, name=\qquad B, position and movement=\qquad C, identification=\qquad D, additional information=\qquad E, date-time group=\textbackslash F]
993 \end{tikzpicture}
994 \caption{Location of \textbf{\texttt{MilSeaSubsurface}} text field amplifiers.}
995 \label{seasubsurfacetext}
996 \end{figure}
997
998 \begin{table}[H]
999 \centering
1000 \begin{tabularx}{\textwidth}{|c|l|X|c|}
1001 \hline
1002 \thead{Location} & \thead{Key} & \thead{Description} & \thead{Prefix*}\\ \hline
1003 \textbf{A} & \texttt{track number} & System Track Number. & TN \\ \hline
1004 \textbf{B} & \texttt{name} & Ships Name, Hull Number or Task Organization Designator (military only), Mission / International call sign. & \\ \hline
1005 \textbf{C} & \texttt{position and movement} & Course [degrees]/Speed [knots] or Bearing [degrees]/Distance [nautical miles] Height [feet/metres]. & C/S, B/D \\ \hline
1006 \textbf{D} & \texttt{identification} & Country of origin (STANAG 1059 - 3-letter code) or Organization (e.g. UN, NATO, EU), Any other information (e.g. IFF / AIS). & \\ \hline
1007 \textbf{E} & \texttt{additional information} & For friendly units: Sensor or Weapon load, endurance, etc. For other Units: Credibility of Information. For submarine contacts: Classification:
1008 \begin{itemize}
1009 \item NONSUB
1010 \item POSSUB LOW 1 or 2
1011 \item POSSUB HIGH 3 or 4
1012 \item PROBSUB
1013 \item CERTSUB
1014 \end{itemize}
1015 & \\ \hline
1016 \textbf{F} & \texttt{date-time group} & An alphanumeric designator for displaying a date-time group (DDHHMMSSZMONYY) or \lq\lq{}O/O\rq\rq{} for on order. The date-time group is composed of a group of six numeric digits with a time zone suffix and the standardized three-letter abbreviation for the month followed by two digits. The first pair of digits represents the day; the second pair, the hour; the third pair, the minutes. The last two digits of the year are after the month. For automated systems, two digits may be added before the time zone suffix and after the minutes to designate seconds. & \\ \hline
1017 \end{tabularx}
1018 \begin{tablenotes}
1019 \item *when applicable.
1020 \end{tablenotes}
1021 \caption{Description of \textbf{\texttt{MilSeaSubsurface}} text field amplifiers.}
1022 \label{seasubsurfacetexttable}
1023 \end{table}
1024
1025 \subsection{Sea Mine Command (\textbf{\texttt{MilMine}})}
1026
1027 This command is used to construct sea mine symbols. Instead of using the \texttt{main} key, this command uses the key \texttt{mine} to define the mine type, and the boolean switch \texttt{neutralised} to display the neutralised variant, as shown in Table \ref{mine}. No modifiers are used. This command also accepts the \texttt{no frame} key. See \textit{Chapter 4, Section 2, Table 4-17} in \DocLink.
1028
1029 \begin{table}[H]
1030 \centering
1031 \begin{tabular}{|l|c|c|c|c|c|c|}
1032 \hline
1033 \multirow{3}{*}{\thead{Value}} & \multicolumn{2}{c|}{\thead{Glyph}} & \multicolumn{4}{c|}{\multirow{3}{*}{\thead{Examples}}}\\ \cline{2-3}
1034 & \thead{Normal} & \thead{\texttt{neutralised}} & \multicolumn{4}{c|}{}\\
1035 \hline
1036 \texttt{free} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=free]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=free, neutralised]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=friendly, mine=free]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=hostile, mine=free]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=neutral, mine=free]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=unknown, mine=free]}}\\ \hline
1037 \texttt{bottomed} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=bottomed]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=bottomed, neutralised]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=friendly, mine=bottomed]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=hostile, mine=bottomed]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=neutral, mine=bottomed]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=unknown, mine=bottomed]}}\\ \hline
1038 \texttt{moored} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=moored]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=moored, neutralised]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=friendly, mine=moored]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=hostile, mine=moored]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=neutral, mine=moored]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=unknown, mine=moored]}}\\ \hline
1039 \texttt{floating} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=floating]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=floating, neutralised]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=friendly, mine=floating]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=hostile, mine=floating]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=neutral, mine=floating]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=unknown, mine=floating]}}\\ \hline
1040 \texttt{in other position} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=in other position]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=in other position, neutralised]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=friendly, mine=in other position]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=hostile, mine=in other position]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=neutral, mine=in other position]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=unknown, mine=in other position]}}\\ \hline
1041 \texttt{rising} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=rising]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=none, mine=rising, neutralised]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=friendly, mine=rising]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=hostile, mine=rising]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=neutral, mine=rising]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilMine[faction=unknown, mine=rising]}}\\ \hline
1042 \end{tabular}
1043 \caption{Table of \textbf{\texttt{MilMine}} icons.}
1044 \label{mine}
1045 \end{table}
1046
1047 \subsubsection{Amplifiers}
1048
1049 \paragraph{Text Fields}
1050
1051 Text fields for \textbf{\texttt{MilMine}} are identical to \textbf{\texttt{MilSeaSubsurface}}.
1052
1053 \newpage\subsection{Space Command (\textbf{\texttt{MilSpace}})}
1054
1055 This command covers symbols for space assets, related activities and other relevant objects (debris) within earth orbit. See \textit{Chapter 5, Section 1 and 2} in \DocLink.
1056
1057 \subsubsection{Icons and Modifiers}
1058
1059 \paragraph{\texttt{Main}}\quad
1060 \pyc{print(symbol_tables["Space_main"])}
1061
1062 \newpage\paragraph{\texttt{Upper}}\quad
1063 \pyc{print(symbol_tables["Space_upper"])}
1064
1065 \newpage\paragraph{\texttt{Lower}}\quad
1066 \pyc{print(symbol_tables["Space_lower"])}
1067
1068 \subsubsection{Amplifiers}
1069
1070 \paragraph{Text Fields}
1071
1072 \textbf{\texttt{MilSpace}} has 5 text field amplifiers, as shown in Figure \ref{spacetext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{spacetexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
1073
1074 \begin{figure}[H]
1075 \centering
1076 \begin{tikzpicture}
1077 \MilSpace[faction=friendly, main=military space station, scale=2, track number=\qquad A, name=\qquad B, position and movement=\qquad C, nation=\qquad D, additional information=\qquad E]
1078 \end{tikzpicture}
1079 \caption{Location of \textbf{\texttt{MilSpace}} text field amplifiers.}
1080 \label{spacetext}
1081 \end{figure}
1082
1083 \begin{table}[H]
1084 \centering
1085 \begin{tabularx}{\textwidth}{|c|l|X|c|}
1086 \hline
1087 \thead{Location} & \thead{Key} & \thead{Description} & \thead{Prefix*}\\ \hline
1088 \textbf{A} & \texttt{track number} & Space System Track Number. & SSTN \\ \hline
1089 \textbf{B} & \texttt{name} & Space System Name or Mission call sign. & \\ \hline
1090 \textbf{C} & \texttt{position and movement} & Georef Position [degrees]/Inclination] or Trajectory, Height [feet/orbit]. &\\ \hline
1091 \textbf{D} & \texttt{nation} & Nation\rq{}s Name: A 3-letter code indicating the object\rq{}s country of origin (STANAG 1059). & \\ \hline
1092 \textbf{E} & \texttt{additional information} & For friendly units: Sensor or Weapon load, specific orbit, footprint etc. For other Units: Credibility of Information. & \\ \hline
1093 \end{tabularx}
1094 \begin{tablenotes}
1095 \item *when applicable.
1096 \end{tablenotes}
1097 \caption{Description of \textbf{\texttt{MilSpace}} text field amplifiers.}
1098 \label{spacetexttable}
1099 \end{table}
1100
1101 \subsection{Space Debris Command (\textbf{\texttt{MilDebris}})}
1102
1103 This command is used to construct symbols that represent space debris. No shared keys are used other than \texttt{scale}. This command uses the key \texttt{size} to define the debris size, and the boolean switch \texttt{man made} to display the variant for artificial debris, as shown in Table \ref{debris}. See \textit{Chapter 5, Section 3, Table 5-7} in \DocLink.
1104
1105 \begin{table}[H]
1106 \centering
1107 \begin{tabular}{|l|c|c|}
1108 \hline
1109 \multirow{3}{*}{\thead{Value}} & \multicolumn{2}{c|}{\thead{Glyph}} \\ \cline{2-3}
1110 & \thead{Normal} & \thead{\texttt{man made}}\\ \hline
1111 \texttt{small} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilDebris[size=small]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilDebris[size=small, man made]}}\\ \hline
1112 \texttt{medium} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilDebris[size=medium]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilDebris[size=medium, man made]}}\\ \hline
1113 \texttt{large} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilDebris[size=large]}} & \adjustbox{valign=m,margin=0.25cm}{\tikz{\MilDebris[size=large, man made]}}\\ \hline
1114 \end{tabular}
1115 \caption{Table of \textbf{\texttt{MilDebris}} symbols.}
1116 \label{debris}
1117 \end{table}
1118
1119
1120 \newpage\subsection{Activity Command (\textbf{\texttt{MilActivity}})}
1121
1122 This command covers symbols that provide the capability to depict stability activities and civil support activities across the continuum of operations. \textit{The \texttt{lower} key is not used as there are no lower modifiers.} See \textit{Chapter 6} in \DocLink.
1123
1124 \subsubsection{Icons and Modifiers}
1125
1126 \paragraph{\texttt{Main}}\quad
1127 \pyc{print(symbol_tables["Activity_main"])}
1128
1129 \newpage\paragraph{\texttt{Upper}}\quad
1130 \pyc{print(symbol_tables["Activity_upper"])}
1131
1132 \subsubsection{Amplifiers}
1133
1134 \paragraph{Text Fields}
1135
1136 \textbf{\texttt{MilActivity}} has 6 text field amplifiers, as shown in Figure \ref{activitytext}. \textit{Some of these amplifiers are placed adjacent to each other, spaces are not automatically inserted between them.} Table \ref{activitytexttable} gives the key and description of each field, along with the standard prefixes to use. This table is mostly identical to the one found in \DocLink.
1137
1138 \begin{figure}[H]
1139 \centering
1140 \begin{tikzpicture}
1141 \MilActivity[faction=friendly, main=explosion, staff comments=\qquad G, additional information=\qquad H, evaluation rating=\qquad J, date-time group=W \qquad~, location=Y \qquad~, country indicator=\qquad AC, scale=2]
1142 \end{tikzpicture}
1143 \caption{Location of \textbf{\texttt{MilActivity}} text field amplifiers.}
1144 \label{activitytext}
1145 \end{figure}
1146
1147 \begin{center}
1148 \begin{tabularx}{\textwidth}{|c|l|X|}
1149 \hline
1150 \thead{Location} & \thead{Key} & \thead{Description} \\ \hline
1151 \textbf{AC} & \texttt{country indicator} & A three-letter code that indicates the country of origin of the unit (STANAG 1059). In stability activities, this field can be used for factions or groups.\\ \hline
1152 \textbf{G} & \texttt{staff comments} & Free text. Can be used by staff for information required by commander.\\ \hline
1153 \textbf{H} & \texttt{additional information} & Free Text.\\ \hline
1154 \textbf{J} & \texttt{evaluation rating} & Degree of confidence that may be placed on the information represented by the symbol. It is shown as one letter and one number made up of Reliability of Source and Credibility of Information. (STANAG 2511). \newline
1155 Reliability of Source:
1156 \begin{enumerate}[label=\Alph*., align=left]
1157 \item Completely reliable.
1158 \item Usually reliable.
1159 \item Fairly reliable.
1160 \item Not usually reliable.
1161 \item Unreliable.
1162 \item Reliability cannot be judged.
1163 \end{enumerate}
1164 Credibility of Information:
1165 \begin{enumerate}[label=\arabic*., align=left]
1166 \item Confirmed by other sources
1167 \item Probably true
1168 \item Possibly true
1169 \item Doubtful
1170 \item Improbable
1171 \item Truth cannot be judged.
1172 \end{enumerate}
1173 \\ \hline
1174 \textbf{W} & \texttt{date-time group} & An alphanumeric designator for displaying a date-time group (DDHHMMSSZMONYY) or \lq\lq{}O/O\rq\rq{} for on order. The date-time group is composed of a group of six numeric digits with a time zone suffix and the standardized three-letter abbreviation for the month followed by two digits. The first pair of digits represents the day; the second pair, the hour; the third pair, the minutes. The last two digits of the year are after the month. For automated systems, two digits may be added before the time zone suffix and after the minutes to designate seconds.\\ \hline
1175 \textbf{Y} & \texttt{location} & Latitude and longitude; grid coordinates.\\ \hline
1176 \multicolumn{3}{c}{}\\
1177 \caption{Description of \textbf{\texttt{MilActivity}} text field amplifiers.}
1178 \label{activitytexttable}
1179 \end{tabularx}
1180 \end{center}
1181
1182 \section{Custom Icons and Modifiers}
1183
1184 \subsection{\MilSymb\ TikZ Picture Directory Structure}
1185
1186 \begin{figure}[H]
1187 \begin{forest}
1188 for tree={
1189 font=\ttfamily\footnotesize,
1190 grow'=0,
1191 child anchor=west,
1192 parent anchor=south,
1193 inner sep=0pt,
1194 anchor=west,
1195 calign=first,
1196 edge path={
1197 \noexpand\path [draw, \forestoption{edge}]
1198 (!u.south west) +(7.5pt,0) |- node[] {} (.child anchor)\forestoption{edge label};
1199 },
1200 before typesetting nodes={
1201 if n=1
1202 {insert before={[,phantom]}}
1203 {}
1204 },
1205 fit=band,
1206 before computing xy={l=15pt},
1207 }
1208 [MilSymb
1209 [text
1210 [normal]
1211 [squashed]
1212 [small]
1213 [smallsquashed]
1214 ]
1215 [air
1216 [main\ldots]
1217 [upper\ldots]
1218 [lower\ldots]
1219 ]
1220 [land
1221 [main\ldots]
1222 [upper\ldots]
1223 [lower\ldots]
1224 ]
1225 [equipment
1226 [main\ldots]
1227 [mobility\ldots]
1228 ]
1229 [installation
1230 [main\ldots]
1231 [upper\ldots]
1232 ]
1233 [seasurface
1234 [main\ldots]
1235 [upper\ldots]
1236 [lower\ldots]
1237 ]
1238 [seasubsurface
1239 [main\ldots]
1240 [upper\ldots]
1241 [lower\ldots]
1242 [mine\ldots]
1243 ]
1244 [space
1245 [main\ldots]
1246 [upper\ldots]
1247 [lower\ldots]
1248 ]
1249 [activity
1250 [main\ldots]
1251 [upper\ldots]
1252 ]
1253 [multi
1254 [main\ldots]
1255 [upper\ldots]
1256 [lower\ldots]
1257 [upperlower\ldots]
1258 ]
1259 [supply\ldots]
1260 [custom\ldots]
1261 ]
1262 \end{forest}
1263 \caption{\MilSymb TikZ Picture Directory Structure.}
1264 \label{directory}
1265 \end{figure}
1266
1267 To add a custom icon or modifier, create a TikZ \texttt{.pic} in the \texttt{custom} directory using \texttt{tikzset}:
1268
1269 \begin{writett}
1270 \begin{verbatim}
1271 \makeatletter %required if using MilSymb@selectedfaction
1272 \tikzset{
1273 MilSymb custom/user icon/.pic={
1274 custom TikZ drawing commands go here...
1275 } %comma after bracket is needed if defining multiple .pic.
1276 }
1277 \makeatother %required if using MilSymb@selectedfaction
1278 \begin{tikzpicture}
1279 \MilLand[faction=hostile, main=user icon]
1280 \end{tikzpicture}
1281 \end{verbatim}
1282 \end{writett}
1283
1284 You can also create your own sub directories, such as \texttt{custom/land/main/user icon}. This is recommended if you want to organise your custom shapes by symbol type and position.To use your icon or modifier in a command, simply use the path as the value for a icon or modifier key \texttt{\textbackslash MilLand[faction=friendly, main=path/to/user icon]}. The \texttt{main}, \texttt{upper} and \texttt{lower} keys all accept custom values, as well as the \texttt{left}, \texttt{right} and \texttt{mobility} keys where applicable.
1285
1286 \subsection{Drawing Bounds}
1287
1288 As specified in \DocLink, most icons and modifiers should fit within a template comprising of a regular octagon exactly \textbf{1} unit in width and \textbf{1} unit in height (with the exception of \textit{fullframe} icons and a few others). In commands that specify upper and lower modifiers, the \textbf{main} icon should not exceed a height of \textbf{0.2} units above and below its origin (the two horizontal dotted line in Figure \ref{octagon}). Similarly, the modifiers should also not extend into the area \textbf{0.2} units above and below the origin of the \textbf{main} icon. The key value \texttt{faction=none} on any \MilSymb command (apart from \texttt{OwnShip} or \texttt{MilDebris}, which do not have faction keys) will output this template instead of a frame.
1289
1290 \begin{figure}[H]
1291 \centering
1292 \begin{tikzpicture}
1293 \MilLand[faction=none, scale=4](0,0)(frame)
1294 \dimline[line style={arrows={Triangle}-{Triangle}}, extension start length=0.75, extension end length=0.75, extension end style={thin, black}, extension start style={thin, black}]{($(frame.north) + (3, 0)$)}{($(frame.south) + (3, 0)$)}{1}
1295 \dimline[line style={arrows={Triangle}-{Triangle}}, extension start length=0.5, extension end length=0.5, extension end style={thin, black}, extension start style={thin, black}]{($(frame.north) + (2.5, -1.2)$)}{($(frame.south) + (2.5, 1.2)$)}{0.4}
1296 \dimline[line style={arrows={Triangle}-{Triangle}}, extension start length=0.55, extension end length=0.55, extension end style={thin, black}, extension start style={thin, black}]{($(frame.north) + (2.5, 0)$)}{($(frame.center) + (2.5, 0.8)$)}{0.3}
1297 \dimline[line style={arrows={Triangle}-{Triangle}}, extension start length=0.55, extension end length=0.55, extension end style={thin, black}, extension start style={thin, black}]{($(frame.center) + (2.5, -0.8)$)}{($(frame.south) + (2.5, 0)$)}{0.3}
1298 %\node {Main Anchor};
1299 \draw[red] plot[only marks, mark=*] coordinates{(0,0) (0, 1.36) (0,-1.36)};
1300 \node[anchor=east, inner sep=5pt, color=red] at (0,0) {Main Origin (0,0)};
1301 \node[anchor=east, inner sep=5pt, color=red] at (0,1.36) {Upper Origin (0,0.34)};
1302 \node[anchor=east, inner sep=5pt, color=red] at (0,-1.36) {Lower Origin (0,-0.34)};
1303 \end{tikzpicture}
1304 \caption{Dimensions of the octagon and origins of the icon and modifiers.}
1305 \label{octagon}
1306 \end{figure}
1307
1308 For the \texttt{\textbf{MilMissile}} command, the template is rotated 90\textdegree anticlockwise, and the \texttt{left} and \texttt{right} keys correspond to the \texttt{upper} and \texttt{lower} keys respectively. The \texttt{mobility} origin is located \textbf{0.1} units below the \texttt{south} anchor of the frame.
1309
1310 \subsection{Border Anchors}
1311
1312 \MilSymb\ defines an anchored bounding box named \textbf{\texttt{M}} around all frames. This has anchor points identical to the \texttt{rectangle} node in TikZ. These can be used as coordinates for drawing icons and modifiers relative to the edge of the frame.
1313
1314 \subsection{Faction Variants}
1315
1316 Most \textit{fullframe} icons have slight variations depending on the faction frame that is being used. To facilitate this, you can create a set of four TikZ \texttt{.pic} in faction sub directories, like so:\\
1317
1318 \noindent\texttt{custom/user icon/friendly/.pic}\\
1319 \texttt{custom/user icon/hostile/.pic}\\
1320 \texttt{custom/user icon/neutral/.pic}\\
1321 \texttt{custom/user icon/unknown/.pic}\\
1322
1323 \subsection{Clipping}
1324
1325 For \textbf{\texttt{MilLand}} symbols, clipping commands are available to trim any icon or modfier to the inside of the frame. Use \texttt{\textbackslash clip \textbackslash clip<faction>} within the drawing commands to clip anything specified after the command to the frame.
1326
1327 Then, insert \texttt{/\textbackslash MilSymb@selectedfaction} directly after the \texttt{path/to/user icon} (so it forms \texttt{path/to/user icon/\textbackslash MilSymb@selectedfaction}). \texttt{\textbackslash MilSymb@selectedfaction} will be replaced by the name of the faction, and complete the path to the icon.
1328
1329 \subsection{Using Existing Icons and Modifiers}
1330
1331 To insert an existing icon or modifier into your custom icon use a nested \texttt{.pic} as so: \texttt{\textbackslash pic\{MilSymb category/position/name\}}, where \texttt{command} generally refers to the \MilSymb\ command it is used in as displayed in Figure \ref{directory}, and \texttt{position} refers to . The exceptions are \texttt{supply}, which contains supply icons detailed in \ref{supply}, \texttt{text} which provides common text templates as detailed in \ref{text}, and \texttt{multi} which is detailed in \ref{multi}. \texttt{mine} is also contained in a sub-directory of \texttt{seasubsurface}, instead of its own directory. \texttt{\textbf{MilDebris}} does not use any icons or modifiers, all drawing syntax is contained within the command.
1332
1333 \subsubsection{Text Templates}
1334 \label{text}
1335
1336 \MilSymb\ uses 4 standard text templates for commonly used text in icons and modifiers. Use regular TikZ text syntax for any variations. You can use them by nesting a \texttt{.pic} as before, but adding \texttt{=\{text to display\}} as a suffix, as in \texttt{\textbackslash pic\{MilSymb text/type=\{text to display\}\}}. Note that conventionally up to 3 characters are designed to be used with normal text, and up to 4 with \lq\lq{}squashed\rq\rq{} versions, in order to appear similar to \DocLink guidelines. Any more characters should use a smaller font.
1337
1338 \begin{figure}[H]
1339 \centering
1340 \begin{tikzpicture}
1341 \matrix[column sep=5mm, row sep=5mm]{
1342 \begin{scope}[scale=2, transform shape]
1343 \MilLand[faction=none]
1344 \pic{MilSymb text/normal={Text}};
1345 \end{scope}
1346 &
1347 \begin{scope}[scale=2, transform shape]
1348 \MilLand[faction=none]
1349 \pic{MilSymb text/squashed={Text}};
1350 \end{scope}
1351 &
1352 \begin{scope}[scale=2, transform shape]
1353 \MilLand[faction=none]
1354 \pic at (0, 0.34) {MilSymb text/small={Text}};
1355 \end{scope}
1356 &
1357 \begin{scope}[scale=2, transform shape]
1358 \MilLand[faction=none]
1359 \pic at (0, 0.34) {MilSymb text/smallsquashed={Text}};
1360 \end{scope}
1361 \\
1362 \node{\texttt{text/normal}}; & \node{\texttt{text/squashed}}; & \node{\texttt{text/small}}; & \node{\texttt{text/smallsquashed}}; \\
1363 };
1364 \end{tikzpicture}
1365 \caption{\MilSymb\ text templates.}
1366 \end{figure}
1367
1368 \subsubsection{Multiple Class}
1369 \label{multi}
1370
1371 Some \MilSymb\ icons and modifiers are used in more than one command. In order to avoid code duplication, these are put in their own directory named \texttt{multi} with a single name, even though different aliases may be used in each command. The \texttt{upperlower} sub-directory is used to store modifier glyphs that are used in both the \texttt{upper} and \texttt{lower} positions.
1372
1373 \begin{pysub}
1374 \begin{tabularx}{\linewidth}{|c|c|}
1375 \hline
1376 \thead{Name} & \thead{Glyph}\\
1377 \hline
1378 !{"\n".join(multi)}
1379 \caption{Table of Multiple Class Icons and Modifiers.}
1380 \end{tabularx}
1381 \end{pysub}
1382 \subsubsection{Hidden Glyphs}
1383
1384 There are some \texttt{.pic} that are not used as an icon or modifier directly, but are used to construct other icons or modifiers because they are used multiple times.
1385
1386 \begin{pysub}
1387 \begin{tabularx}{\linewidth}{|c|c|}
1388 \hline
1389 \thead{Name} & \thead{Glyph}\\
1390 \hline
1391 !{"\n".join(hidden)}
1392 \caption{Table of Hidden Glyphs.}
1393 \end{tabularx}
1394 \end{pysub}
1395
1396 \begin{landscape}
1397
1398 \section{Examples}
1399
1400 \subsection{Front Cover}
1401
1402 \begin{writett}
1403 \fontsize{6}{0}\selectfont
1404 \begin{verbatim}
1405 \thispagestyle{empty}
1406 \begin{center}
1407 \begin{tikzpicture}[remember picture]
1408
1409 \coordinate (NE) at ($(current page text area.north east)-(1.5, 1.5)$);
1410 \coordinate (NW) at ($(current page text area.north west)-(-1.5, 1.5)$);
1411 \coordinate (SE) at ($(current page text area.south east)-(1.5, -1.5)$);
1412 \coordinate (SW) at ($(current page text area.south west)-(-1.5, -1.5)$);
1413
1414 \MilLand[faction=hostile, echelon=team, main=infantry, scale=2](NE)
1415 \MilAir[faction=friendly, main=military fixed wing, upper=jammer, lower=light, scale=2](NW)
1416 \MilSeaSurface[faction=neutral, main=hazardous material transport ship, lower=fast, scale=2](SE)
1417 \MilActivity[faction=unknown, main=searching, upper=house to house, scale=2](SW)
1418
1419 \MilLand[faction=unknown, echelon=battalion, main=armoured, upper=missile, lower=long range, scale=2]($(NE)!0.33!(NW)$)
1420 \MilEquipment[faction=neutral, main=heavy machine gun, mobility=pack animal, scale=2]($(NE)!0.66!(NW)$)
1421
1422 \MilSpace[faction=hostile, main=military earth observation satellite, upper=low earth orbit, lower=radar, scale=2]($(SE)!0.33!(SW)$)
1423 \MilInstallation[faction=friendly, main=electric power, upper=nuclear energy, scale=2]($(SE)!0.66!(SW)$)
1424
1425 \MilSeaSubsurface[faction=friendly, main=snorkelling submarine, upper=auxiliary, lower=nuclear type 5, scale=2]($(NE)!0.2!(SE)$)
1426 \MilLand[faction=neutral, echelon=platoon, main=supply, supply={2}{4}, scale=2]($(NE)!0.4!(SE)$)
1427 \MilActivity[faction=hostile, main=attempted criminal activity, upper=rape, scale=2]($(NE)!0.6!(SE)$)
1428 \MilEquipment[faction=unknown, main=tank recovery vehicle, mobility=wheeled semi trailer, scale=2]($(NE)!0.8!(SE)$)
1429
1430 \MilMissile[faction=hostile, left=sub surface, right=launched, scale=2]($(NW)!0.2!(SW)$)
1431 \MilInstallation[faction=unknown, main=civilian telecommunications, upper=television, scale=2]($(NW)!0.4!(SW)$)
1432 \MilSpace[faction=friendly, main=civilian space station, upper=geosynchronous orbit, scale=2]($(NW)!0.6!(SW)$)
1433 \MilLand[faction=neutral, echelon=corps, main=armoured, upper=missile, lower=long range, scale=2]($(NW)!0.8!(SW)$)
1434
1435 \pgfresetboundingbox
1436 \path[use as bounding box] (0,0);
1437
1438 \end{tikzpicture}
1439
1440 {\let\newpage\relax\maketitle}
1441 \end{center}
1442 \end{verbatim}
1443 \end{writett}
1444
1445 \end{landscape}
1446
1447 \subsection{1\textsuperscript{st} Marine Division (USA)}
1448
1449 \begin{figure}[H]
1450 \centering
1451 \input{manual_examples/mef.tex}
1452 \caption{Recreation of Structure of 1\textsuperscript{st} US Marine Division. Sourced from \href{https://commons.wikimedia.org/wiki/File:1st_US_Marine_Division.png}{Wikipedia}}.
1453 \label{org}
1454 \end{figure}
1455
1456 \begin{landscape}
1457
1458 \begin{writett}
1459 \fontsize{6}{0}\selectfont
1460 \begin{verbatim}
1461 \definecolor{salmon}{HTML}{F69289} %custom tank symbol colour
1462
1463 %custom icons
1464 \makeatletter
1465 \tikzset{
1466 MilSymb custom/marine/.pic={
1467 \pic{MilSymb land/main/infantry/\MilSymb@selectedfaction};
1468 \clip \clipfriendly;
1469 \pic[yshift=-10.75]{MilSymb land/main/amphibious/\MilSymb@selectedfaction};
1470 },
1471 MilSymb custom/tank/.pic={
1472 \filldraw[fill=salmon]circle(0.5 and 0.15);
1473 },
1474 MilSymb custom/reconnaissance tank/.pic={
1475 \pic{MilSymb custom/tank};
1476 \pic{MilSymb land/main/reconnaissance/\MilSymb@selectedfaction};
1477 },
1478 MilSymb custom/amphibious tank/.pic={
1479 \pic{MilSymb custom/tank};
1480 \clip \clipfriendly;
1481 \pic[yshift=-10.75]{MilSymb land/main/amphibious/\MilSymb@selectedfaction};
1482 }
1483 }
1484 \makeatother
1485
1486 \fontsize{6}{0}\selectfont
1487
1488 \begin{tikzpicture}
1489
1490 % grid of symbols
1491 \node(H) at (7,0){\includegraphics[width=1.5cm]{manual_examples/772px-1st_Marine_Division_insignia}};
1492 \node[right of=H, node distance=1.85cm, align=left](HT){1\textsuperscript{st} Marine Division\\ CAMP PENDLETON};
1493 \node[above of=H, star,star points=5, star point ratio=0.5, rotate=180, xshift=-3, fill=yellow, draw] {};
1494 \node[above of=H, star,star points=5, star point ratio=0.5, rotate=180, xshift=3, fill=yellow, draw] {};
1495 \MilLand[scale=0.75, faction=friendly, echelon=regiment, main=marine](3.5, -2)(C11){1\textsuperscript{st} Marine Rgt. \\ CAMP PENDLETON}
1496 \MilLand[scale=0.75, faction=friendly, echelon=regiment, main=marine](7, -2)(C21){5\textsuperscript{th} Marine Rgt. \\ CAMP PENDLETON}
1497 \MilLand[scale=0.75, faction=friendly, echelon=regiment, main=marine](10.5, -2)(C31){7\textsuperscript{th} Marine Rgt. \\ CAMP PENDLETON}
1498 \MilLand[scale=0.75, faction=friendly, echelon=regiment, main=field artillery](14, -2)(C41){11\textsuperscript{th} Marine Rgt. \\ CAMP PENDLETON}
1499 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=headquarters](0, -3)(C02){Headquarters \\ Battalion}
1500 \MilLand[scale=0.75, faction=friendly, echelon=company, main=headquarters](3.75, -3)(C12){~\\ HQ Coy.}
1501 \MilLand[scale=0.75, faction=friendly, echelon=company, main=headquarters](7.25, -3)(C22){~\\ HQ Coy.}
1502 \MilLand[scale=0.75, faction=friendly, echelon=company, main=headquarters](10.75, -3)(C32){~\\ HQ Coy.}
1503 \MilLand[scale=0.75, faction=friendly, echelon=company, main=headquarters](14.25, -3)(C42){~\\ HQ Battery}
1504 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=tank](0, -4)(C03){1\textsuperscript{st} Tank \\ Battalion}
1505 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](3.75, -4)(C13){1\textsuperscript{st} Btn. \\ 1\textsuperscript{st} Marines}
1506 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](7.25, -4)(C23){1\textsuperscript{st} Btn. \\ 5\textsuperscript{th} Marines}
1507 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](10.75, -4)(C33){1\textsuperscript{st} Btn. \\ 7\textsuperscript{th} Marines}
1508 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=field artillery](14.25, -4)(C43){1\textsuperscript{st} Btn. \\ 11\textsuperscript{th} Marines}
1509 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=reconnaissance tank, lower=wheeled](0, -5)(C04){1\textsuperscript{st} Light Armoured \\ Reconnaissance Btn.}
1510 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](3.75, -5)(C14){2\textsuperscript{nd} Btn. \\ 1\textsuperscript{st} Marines}
1511 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](7.25, -5)(C24){2\textsuperscript{nd} Btn. \\ 5\textsuperscript{th} Marines}
1512 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](10.75, -5)(C34){2\textsuperscript{nd} Btn. \\ 7\textsuperscript{th} Marines}
1513 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=field artillery](14.25, -5)(C44){2\textsuperscript{nd} Btn. \\ 11\textsuperscript{th} Marines}
1514 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=reconnaissance tank, lower=wheeled](0, -6)(C05){3\textsuperscript{rd} Light Armoured \\ Reconnaissance Btn.}
1515 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](3.75, -6)(C15){3\textsuperscript{rd} Btn. \\ 1\textsuperscript{st} Marines}
1516 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](7.25, -6)(C25){3\textsuperscript{rd} Btn. \\ 5\textsuperscript{th} Marines}
1517 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](10.75, -6)(C35){3\textsuperscript{rd} Btn. \\ 7\textsuperscript{th} Marines}
1518 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=field artillery](14.25, -6)(C45){3\textsuperscript{rd} Btn. \\ 11\textsuperscript{th} Marines}
1519 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=reconnaissance](0, -7)(C06){1\textsuperscript{st} Reconnaissance \\ Battalion}
1520 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](3.75, -7)(C16){1\textsuperscript{st} Btn. \\ 4\textsuperscript{th} Marines}
1521 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](7.25, -7)(C26){2\textsuperscript{nd} Btn. \\ 4\textsuperscript{th} Marines}
1522 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=marine](10.75, -7)(C36){3\textsuperscript{rd} Btn. \\ 4\textsuperscript{th} Marines}
1523 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=field artillery, upper=multiple rocket launcher, lower=wheeled](14.25, -7)(C46){5\textsuperscript{rd} Btn. 11\textsuperscript{th} Marines}
1524 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=engineer](0, -8)(C07){1\textsuperscript{st} Combat \\ Engineer Battalion}
1525 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=engineer](0, -9)(C08){3\textsuperscript{rd} Combat \\ Engineer Battalion}
1526 \MilLand[scale=0.75, faction=friendly, echelon=battalion, main=amphibious tank](0, -10)(C09){3\textsuperscript{rd} Assault \\ Amphibian Battalion}
1527
1528 %connecting lines
1529 \draw [shorten >=0.25cm] (H.south) |- ($(H.south)!0.5!(C11.north)$) -| (C11.north);
1530 \draw [shorten >=0.25cm] (H.south) |- ($(H.south)!0.5!(C11.north)$) -| (C21.north);
1531 \draw [shorten >=0.25cm] (H.south) |- ($(H.south)!0.5!(C11.north)$) -| (C31.north);
1532 \draw [shorten >=0.25cm] (H.south) |- ($(H.south)!0.5!(C11.north)$) -| (C41.north);
1533 \draw (H.south) |- ($(H.south)!0.5!(C11.north)$) -| ($(C02.west)+(-0.25, 0)$) -| (C02.west);
1534
1535 \draw (C11.south west) |- (C12.west);
1536 \draw (C11.south west) |- (C13.west);
1537 \draw (C11.south west) |- (C14.west);
1538 \draw (C11.south west) |- (C15.west);
1539 \draw (C11.south west) |- (C16.west);
1540
1541 \draw (C21.south west) |- (C22.west);
1542 \draw (C21.south west) |- (C23.west);
1543 \draw (C21.south west) |- (C24.west);
1544 \draw (C21.south west) |- (C25.west);
1545 \draw (C21.south west) |- (C26.west);
1546
1547 \draw (C31.south west) |- (C32.west);
1548 \draw (C31.south west) |- (C33.west);
1549 \draw (C31.south west) |- (C34.west);
1550 \draw (C31.south west) |- (C35.west);
1551 \draw (C31.south west) |- (C36.west);
1552
1553 \draw (C41.south west) |- (C42.west);
1554 \draw (C41.south west) |- (C43.west);
1555 \draw (C41.south west) |- (C44.west);
1556 \draw (C41.south west) |- (C45.west);
1557 \draw (C41.south west) |- (C46.west);
1558
1559 \draw (C02.west) -| ($(C02.west)+(-0.25, 0)$) |- (C03.west);
1560 \draw (C03.west) -| ($(C02.west)+(-0.25, 0)$) |- (C04.west);
1561 \draw (C04.west) -| ($(C02.west)+(-0.25, 0)$) |- (C05.west);
1562 \draw (C05.west) -| ($(C02.west)+(-0.25, 0)$) |- (C06.west);
1563 \draw (C06.west) -| ($(C02.west)+(-0.25, 0)$) |- (C07.west);
1564 \draw (C07.west) -| ($(C02.west)+(-0.25, 0)$) |- (C08.west);
1565 \draw (C08.west) -| ($(C02.west)+(-0.25, 0)$) |- (C09.west);
1566
1567 \end{tikzpicture}
1568 \end{verbatim}
1569 \end{writett}
1570
1571 \end{landscape}
1572
1573 \section{Control Measures}
1574
1575 Control Measures are planned to be included in the next major version of \MilSymb. Please see the \href{https://github.com/ralphieraccoon/MilSymb}{GitHub} repository for further information.
1576
1577 \end{document}