Debian Codegraph @

texmf-dist/doc/latex/beamer/emulation-examples/beamerexample-texpower.tex

raw
1 % $Header$
2
3 % This file is a demonstration on how a seminar file should be
4 % changed to make it work with beamer.
5
6
7 % Copyright notice:
8
9 % Except for the changes indicated by CHANGED, this file is the original
10 % file texpower-0.0.9d/doc/seminardemo.tex, which is part of the
11 % examples of the texpower package.
12
13
14
15 % seminardemo.tex,v 1.2 2002/11/14 20:46:00 hansfn Exp
16 %
17 % TeXPower bundle - dynamic online presentations with LaTeX
18 % Copyright (C) 1999-2002 Stephan Lehmke
19 %
20 % This program is free software; you can redistribute it and/or
21 % modify it under the terms of the GNU General Public License
22 % as published by the Free Software Foundation; either version 2
23 % of the License, or (at your option) any later version.
24 %
25 % This program is distributed in the hope that it will be useful,
26 % but WITHOUT ANY WARRANTY; without even the implied warranty of
27 % MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 % GNU General Public License for more details.
29 %
30 %-----------------------------------------------------------------------------------------------------------------
31 % File: seminardemo.tex
32 %
33 % Simple examples the for combining the seminar class with the dynamic features provided by the package texpower.sty.
34 %
35 %-----------------------------------------------------------------------------------------------------------------
36 % Autor: Stephan Lehmke <[email protected]>
37 %
38 % v0.0.1 Jun 02, 2000: First version for the pre-alpha release of TeXPower.
39 %
40
41
42 % CHANGED: commented
43 %\documentclass{seminar}
44 %
45 %% We need fixseminar for setting the page size correctly.
46 %
47 %\usepackage{fixseminar}
48 %
49 %
50 %%-----------------------------------------------------------------------------------------------------------------
51 %% The texpower package is loaded.
52 %% We give the display option so dynamic features are enabled.
53 %%
54 %\usepackage[display]{texpower}
55
56 % CHANGED: Added
57 \documentclass[slidestop,usepdftitle=false]{beamer}
58 \usepackage[accumulated]{beamerseminar}
59 \usepackage{beamertexpower}
60 \usepackage{beamerthemeshadow}
61
62
63 % CHANGED: Moved \title and \author outside of slide
64 \title{The \code{texpower} Package\\ {\normalfont \texttt{seminar} Demo}}
65 \author[Stephan Lehmke]{Stephan Lehmke\\\code{mailto:[email protected]}}
66
67 \begin{document}
68 \begin{slide}
69
70 \maketitle
71
72 \newslide
73
74 \tableofcontents
75 \end{slide}
76
77 % CHANGED: Added \frame, moved \section out, added \frametitle
78 \section{A list environment}
79 \frame{
80 \begin{slide}
81 \centerslidesfalse
82 \frametitle{A list environment}
83
84 % The \pause command `splits' the current page at the place it appears, producing two pages, one with everything which
85 % came before the \pause command, one containing this and additionally the stuff coming after \pause. When these pages
86 % are presented with acrobar reader in full screen mode (or any other viewer with this capability), the presentation
87 % will appear to `stop' at the point the \pause command was issued and `resume' in the moment the presenter switches to
88 % the next page.
89
90 \pause
91
92 % As \pause forces a paragraph break, it can not be used to separate a description label from the associated text. For
93 % this, we use the (very flexible) \stepwise command. Inside the argument of \stepwise, an arbitrary number of \step
94 % commands may occur. \stepwise will produce as many pages as there are \step commands, making the arguments of the
95 % \step commands appear ``one by one''.
96
97 \stepwise
98 {%
99 \begin{description}
100 \item[foo.] \step{bar.}
101 \step{\item[baz.]} \step{qux.}
102 \end{description}
103 }
104
105
106
107 \end{slide}
108 }
109
110 % CHANGED: Added \frame, moved \section out
111 \section{An aligned equation}
112 \frame{
113 \begin{slide}
114 \centerslidesfalse
115 \frametitle{An aligned equation}
116
117 \pause
118
119 % Normally for \stepwise, if a \step is not yet active, its argument is ignored completely. This would disturb
120 % alignments, because the width changes with every new activated \step.
121 % \parstepwise is a variant of \stepwise where the argument of an inactive \step is put into a \phantom, leaving the
122 % proper amount of white space.
123
124 \parstepwise
125 {%
126 % Using eqnarray with equation numbers here means all equation numbers will be visible from the outset, because only
127 % the contents of the lines are `filled in'. See the full demo for an example of aligned equations where equation
128 % numbers `appear'.
129 \begin{eqnarray}
130 %
131 % When the argument of \step is put into a box (as it happens with \parstepwise), tabulators can not go in there. As
132 % we want the equals sign to appear at the same time as the right side of the equation, we use \restep for the
133 % latter. \restep is like \step, but it appears at the same time as the previous \step command.
134 %
135 \sum_{i=1}^{n} i & \step{=} & \restep{1 + 2 + \cdots + (n-1) + n}\\
136 %
137 & \step{=} & \restep{1 + n + 2 + (n-1) + \cdots}\\
138 %
139 & \step{=} & \restep
140 {% We can nest \step commands inside each other. The order of execution is just the
141 % order of appearance, independent of nesting.
142 % \switch is a variant of \step which takes two arguments and toggles between them on
143 % activation. This way, we can make the \underbrace `appear'.
144 % We insert a \vphantom in the first argument so that the equation numbers will be
145 % placed correctly whether or not the underbrace is didplayed.
146 \switch
147 {%
148 \vphantom{\underbrace{(1 + n) + \cdots + (1 + n)}_{\times\frac{n}{2}}}%
149 (1 + n) + \cdots + (1 + n)%
150 }
151 {\underbrace{(1 + n) + \cdots + (1 + n)}_{\times\frac{n}{2}}}%
152 }
153 \\
154 %
155 % This is another nested application of \step. Note that the spacing of \cdot has to be corrected manually by
156 % inserting {} left of it, because otherwise it would behave like a prefix operator.
157 %
158 & \step{=} & \restep{\frac{(1 + n)\step{{}\cdot n}}{\restep{2}}}
159 \end{eqnarray}
160 }
161
162
163
164
165 \end{slide}
166 }
167
168 % CHANGED: Added \frame, moved \section out
169 \section{An array}
170 \frame{
171 \begin{slide}
172 \centerslidesfalse
173 \frametitle{An array}
174
175 \stepwise
176 {% With arrays, beware of problems with automatic calculation of cell widths.
177 %
178 % If you want all widths to be calculated automatically, you need to use \parstepwise, with the consequence that
179 % a) tabulators or newlines can not go into the argument of \step,
180 % b) the array `structure' (rules) will be completely visible right from the beginning.
181 %
182 % If you want to use \stepwise for being able to build the `structure' (like \hilne's) dynamically (as done in the
183 % following), you have to make sure that the cell widths are correct from the very first line, because otherwise the
184 % array will expand horizontally, destroying the dynamic effect. This can be assured by
185 % a) using only p cells,
186 % b) making sure all the cells in the first line are at least as wide as the widest cell which will appear later. If
187 % you are using the calc package, this is easiest by putting \makebox[\widthof{widest entry}]{first entry} into
188 % the first cell. Otherwise, you can use \settowidth.
189 %
190 \begin{displaymath}
191 \begin{array}{rrrrr}
192 \step
193 {%
194 n & \log n & n\log n & \lefteqn{n^2}\phantom{25} & \lefteqn{2^n}\phantom{32} \\
195 \hline%
196 }%
197 \step{0 &} \step{\textrm{---} &} \step{\textrm{---} &} \step{0 &} \step{1 \\}%
198 \step{1 &} \step{0\phantom{.6} &} \step{0\phantom{.8} &} \step{1 &} \step{2 \\}%
199 \step{2 &} \step{1\phantom{.6} &} \step{2\phantom{.8} &} \step{4 &} \step{4 \\}%
200 \step{3 &} \step{1.6 &} \step{4.8 &} \step{9 &} \step{8 \\}%
201 \step{4 &} \step{2\phantom{.6} &} \step{8\phantom{.8} &} \step{16 &} \step{16 \\}%
202 \step{5 &} \step{2.3 &} \step{11.6 &} \step{25 &} \step{32 }%
203 \end{array}
204 \end{displaymath}
205 }
206
207
208
209
210 \end{slide}
211 }
212
213 % CHANGED: Added \frame, moved \section out
214 \section{A picture}
215 \frame{
216 \begin{slide}
217 \centerslidesfalse
218 \frametitle{A picture}
219
220 \pause
221
222 \begin{center}%
223 \stepwise
224 {%
225 \setlength{\unitlength}{1.5\semcm}%
226 \delimitershortfall-1sp% Just for the nested braces
227 \begin{picture}(14,2)
228 \put(0,1){\vector(1,0){1}}
229 \put(0.5,0.5){\makebox(0,0){\small $x(t)$}}
230 \put(13,1){\vector(1,0){1}}
231 \put(13.5,0.5){\makebox(0,0){\small $y(t)$}}
232 \step
233 {
234 \put(1,1){\line(3,2){1.5}}
235 \put(1,1){\line(3,-2){1.5}}
236 \put(2.5,0){\line(0,1){2}}
237 \put(2,1){\makebox(0,0){\large $\varphi$}}
238 }
239 \step
240 {
241 \put(2.5,1){\vector(1,0){3.5}}
242 \put(4.25,0.5){\makebox(0,0){\small $F_t = \varphi\left(x(t)\right)$}}
243 }
244 \step
245 {
246 \put(6,0){\framebox(2,2){\large $\Phi$}}
247 }
248 \step
249 {
250 \put(8,1){\vector(1,0){3.5}}
251 %
252 % Here, we find another nested use of \step inside \step.
253 % \bstep is a variant of \step which _always_ puts its argument into a box for leaving the correct amount of
254 % white space. We cannot use \parstepwise here because \put can't go into a box. Hence, just using \step for
255 % building the nested formula on the next line would give the wrong size for the nested braces.
256 %
257 \put(9.75,0.5){\makebox(0,0){\footnotesize $G_t = \Phi\left(\bstep{\varphi\left(\bstep{x(t)}\right)}\right)$}}
258 }
259 \step
260 {
261 \put(13,1){\line(-3,2){1.5}}
262 \put(13,1){\line(-3,-2){1.5}}
263 \put(11.5,0){\line(0,1){2}}
264 \put(12,1){\makebox(0,0){\large $\delta$}}
265 }
266 \end{picture}%
267 }%
268 \end{center}%
269 \end{slide}
270 }
271 \end{document}