Debian Codegraph @

debian/share/inittab

raw
1 # /etc/inittab: init(8) configuration.
2 # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
3
4 # The default runlevel.
5 id:2:initdefault:
6
7 # Boot-time system configuration/initialization script.
8 # This is run first except when booting in emergency (-b) mode.
9 si::sysinit:/etc/init.d/rcS
10
11 # What to do in single-user mode.
12 ~~:S:wait:/sbin/sulogin --force
13
14 # /etc/init.d executes the S and K scripts upon change
15 # of runlevel.
16 #
17 # Runlevel 0 is halt.
18 # Runlevel 1 is single-user.
19 # Runlevels 2-5 are multi-user.
20 # Runlevel 6 is reboot.
21
22 l0:0:wait:/etc/init.d/rc 0
23 l1:1:wait:/etc/init.d/rc 1
24 l2:2:wait:/etc/init.d/rc 2
25 l3:3:wait:/etc/init.d/rc 3
26 l4:4:wait:/etc/init.d/rc 4
27 l5:5:wait:/etc/init.d/rc 5
28 l6:6:wait:/etc/init.d/rc 6
29 # Normally not reached, but fallthrough in case of emergency.
30 z6:6:respawn:/sbin/sulogin --force
31
32 # What to do when CTRL-ALT-DEL is pressed.
33 ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
34
35 # Action on special keypress (ALT-UpArrow).
36 #kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
37
38 # What to do when the power fails/returns.
39 pf::powerwait:/etc/init.d/powerfail start
40 pn::powerfailnow:/etc/init.d/powerfail now
41 po::powerokwait:/etc/init.d/powerfail stop
42
43 # /sbin/getty invocations for the runlevels.
44 #
45 # The "id" field is traditionally the same as the
46 # last characters of the device (after "tty").
47 #
48 # Format:
49 # <id>:<runlevels>:<action>:<process>
50 #
51 # Note that on most Debian systems tty7 is used by the X Window System,
52 # so if you want to add more getty's go ahead but skip tty7 if you run X.
53 #
54 1:2345:respawn:/sbin/getty -8 --noclear 38400 tty1
55 2:23:respawn:/sbin/getty -8 38400 tty2
56 3:23:respawn:/sbin/getty -8 38400 tty3
57 4:23:respawn:/sbin/getty -8 38400 tty4
58 5:23:respawn:/sbin/getty -8 38400 tty5
59 6:23:respawn:/sbin/getty -8 38400 tty6
60
61 # Example how to put a getty on a serial line (for a terminal)
62 #
63 #S0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
64 #S1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
65 #
66 # or on a USB serial line
67 #U0:23:respawn:/sbin/getty -L ttyUSB0 9600 vt100
68
69 # Example how to put a getty on a modem line.
70 #
71 #S3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
72
73 # Example for systemd-nspawn
74 # Only /dev/console exists inside nspawn, so we need a getty on that.
75 # Also make sure to comment out the gettys on tty* above.
76 #C0:2345:respawn:/sbin/getty -8 --noclear --keep-baud console 115200,38400,9600