Debian Codegraph @

testsuite/systemtap.server/server_locale.exp

raw
1 ########### Startup Server #############
2 # Don't attempt these tests if the client/server are not available or
3 # we aren't doing 'make installcheck'
4 if {! [installtest_p]} { untested "Server Locale Tests"; return }
5 if {! [setup_server]} then {
6 untested "Server Locale Tests"
7 return
8 }
9 ######################################################
10 ################# General Tests ######################
11 ######################################################
12
13 set valid_script {{probe begin{printf("Hello\n"); exit();}}}
14 set french_script {{probe begin{printf("Bonjour\n"); exit();}}}
15 set invalid_script {{probe begin{printf("Hello); exit();}}}
16
17 ###### Embedded '\n' in Environment Variables ########
18 # Should not allow embedded '\n' in Environment Variables
19 set test "Embedded '\\n' in Env Vars"
20 set cmd [concat env \"LANG=en_US\\n.utf8\" stap -e $valid_script $use_server]
21 send_log "executing: $cmd\n"
22 eval spawn $cmd
23 expect {
24 -timeout 150
25 -re {^Server: Localization key=value line [^\r\n]*\r\n} {
26 pass $test
27 }
28 -re {^[^\r\n]*\r\n} {
29 exp_continue
30 }
31 eof {
32 fail "$test (eof)"
33 }
34 timeout {
35 kill -INT -[exp_pid] 2
36 fail "$test (timeout)"
37 }
38 }
39 catch {close}; catch {wait}
40
41
42 ###### Embedded ';' in Environment Variables ########
43 # Should not allow embedded ';' in Environment Variables
44 # There are many disallowed chars, but let's just try one
45 set test "Embedded ';' in Env Vars"
46 set cmd [concat env \"LANG=en_US\;.utf8\" stap -e $valid_script $use_server]
47 send_log "executing: $cmd\n"
48 eval spawn $cmd
49 expect {
50 -timeout 150
51 -re "^Server: Localization value '\[^'\]*' contains illegal characters\r\n" {
52 pass $test
53 }
54 -re {^[^\r\n]*\r\n} {
55 exp_continue
56 }
57 eof {
58 fail "$test (eof)"
59 }
60 timeout {
61 kill -INT -[exp_pid] 2
62 fail "$test (timeout)"
63 }
64 }
65 catch {close}; catch {wait}
66
67
68 ###### Use of "_.-@=" in Environment Variables ########
69 # Should allow "_.-@=" in Environment Variables
70 set test "Use of '_.-@=' in Env Vars"
71 set cmd [concat env LANG=en_US.utf-8@toronto=test stap -e $valid_script $use_server]
72 send_log "executing: $cmd\n"
73 eval spawn $cmd
74 expect {
75 -timeout 150
76 -re "^Hello\r\n" {
77 pass $test
78 }
79 -re {^[^\r\n]*\r\n} {
80 exp_continue
81 }
82 eof {
83 fail "$test (eof)"
84 }
85 timeout {
86 kill -INT -[exp_pid] 2
87 fail "$test (timeout)"
88 }
89 }
90 catch {close}; catch {wait}
91
92
93
94 ######################################################
95 ################### LANG TESTS #######################
96 ######################################################
97
98 ########### LANG French Sniff Test ###########
99 #
100 # Note that on newer versions of Fedora, setting LANG to French isn't
101 # enough, you also need the French langpack installed. To do so,
102 # you'll need to do (as root):
103 #
104 # dnf install langpacks-fr
105 #
106 # In theory, we could test the system to see if has the French
107 # langpacks installed, but in practice the command to do that varies
108 # between distros.
109 #
110 # So, let's test and see if the French locale seems to work. Run stap
111 # locally and see if we get French output. If we don't get French
112 # output when run locally, we won't get it from the server on this
113 # system either.
114
115 set test "French LANG Sniff Test"
116 set french_supported -1
117 set cmd [concat env LANG=fr_FR.utf8 stap -V]
118 send_log "executing: $cmd\n"
119 eval spawn $cmd
120 expect {
121 -timeout 150
122 -re {^options activées :[^\r\n][^\r\n]*\r\n} {
123 set french_supported 1
124 pass $test
125 }
126 -re {^enabled features:[^\r\n][^\r\n]*\r\n} {
127 set french_supported 0
128 xfail $test
129 }
130 -re {^[^\r\n]*\r\n} {
131 exp_continue
132 }
133 eof {
134 fail "$test (eof)"
135 }
136 timeout {
137 kill -INT -[exp_pid] 2
138 fail "$test (timeout)"
139 }
140 }
141 catch {close}; catch {wait}
142 if {$french_supported == -1} {
143 fail "$test - no expected output seen"
144 }
145
146 ########### LANG Proper Syntax Test (French) ##############
147 # Run a basic execution test in French. Should return only "Bonjour".
148 set test "LANG Proper Syntax Test (French)"
149 set cmd [concat env LANG=fr_FR.utf8 stap -e $french_script $use_server]
150 send_log "executing: $cmd\n"
151 eval spawn $cmd
152 expect {
153 -timeout 150
154 -re "^Bonjour\r\n" {
155 pass $test
156 }
157 -re {^[^\r\n]*\r\n} {
158 exp_continue
159 }
160 eof {
161 fail "$test (eof)"
162 }
163 timeout {
164 kill -INT -[exp_pid] 2
165 fail "$test (timeout)"
166 }
167 }
168 catch {close}; catch {wait}
169
170
171 ########### LANG Proper Syntax Test (English) #############
172 # Run a basic execution test in English. Should return only "Hello".
173 set test "LANG Proper Syntax Test (English)"
174 set cmd [concat env LANG=en_US.utf8 stap -e $valid_script $use_server]
175 send_log "executing: $cmd\n"
176 eval spawn $cmd
177 expect {
178 -timeout 150
179 -re "^Hello\r\n" {
180 pass $test
181 }
182 -re {^[^\r\n]*\r\n} {
183 exp_continue
184 }
185 eof {
186 fail "$test (eof)"
187 }
188 timeout {
189 kill -INT -[exp_pid] 2
190 fail "$test (timeout)"
191 }
192 }
193 catch {close}; catch {wait}
194
195
196
197 ########### LANG Bad Syntax Test (French) #############
198 # Run an execution test with a syntax error, in French.
199 #
200 # Note that we can't test for exact output here, since we may not have
201 # up to date French translations. So, if we get anything in French, we
202 # pass.
203 set test "LANG Bad Syntax Test (French)"
204 if {$french_supported != 1} {
205 setup_xfail *-*-*
206 }
207 set cmd [concat env LANG=fr_FR.utf8 stap -e $invalid_script $use_server]
208 send_log "executing: $cmd\n"
209 eval spawn $cmd
210 expect {
211 -timeout 150
212 -re {Ne peut trouver la guillemet} {
213 pass $test
214 }
215 -re {^[^\r\n]*\r\n} {
216 exp_continue
217 }
218 eof {
219 fail "$test (eof)"
220 }
221 timeout {
222 kill -INT -[exp_pid] 2
223 fail "$test (timeout)"
224 }
225 }
226 catch {close}; catch {wait}
227
228
229 ########### LANG Bad Syntax Test (English) #############
230 # Run an execution test with a syntax error, in English.
231 set test "LANG Bad Syntax Test (English)"
232 set cmd [concat env LANG=en_US.utf8 stap -e $invalid_script $use_server]
233 send_log "executing: $cmd\n"
234 eval spawn $cmd
235 expect {
236 -timeout 150
237 -re {^parse error: Could not find matching closing quote\r\n} {
238 pass $test
239 }
240 -re {^1 parse error\.\r\n} {
241 pass $test
242 }
243 -re {^[^\r\n]*\r\n} {
244 exp_continue
245 }
246 eof {
247 fail "$test (eof)"
248 }
249 timeout {
250 kill -INT -[exp_pid] 2
251 fail "$test (timeout)"
252 }
253 }
254 catch {close}; catch {wait}
255
256
257 ######################################################
258 ################ LC_CTYPE Tests ######################
259 ######################################################
260 # NOT YET TESTED - NO APPARENT EFFECT
261
262 ######################################################
263 ############### LC_COLLATE Tests #####################
264 ######################################################
265 # NOT YET TESTED - NO APPARENT EFFECT
266
267 ######################################################
268 ############## LC_MESSAGES Tests #####################
269 ######################################################
270 # NOT YET TESTED - NO APPARENT EFFECT
271
272 ######################################################
273 ################# LC_TIME Tests ######################
274 ######################################################
275 # NOT YET TESTED - NO APPARENT EFFECT
276
277 ######################################################
278 ############### LC_MONETARY Tests ####################
279 ######################################################
280 # NOT YET TESTED - NO APPARENT EFFECT
281
282 ######################################################
283 ################ LC_NUMERIC Tests ####################
284 ######################################################
285 # NOT YET TESTED - NO APPARENT EFFECT
286
287 ########### Shutdown Server #############
288 # Shudown the server.
289 shutdown_server