| 1 |
set self buildok |
| 2 |
set test_suffix "(interactive)" |
| 3 |
|
| 4 |
if {! [readline_p]} { untested "${self} ${test_suffix}"; return } |
| 5 |
|
| 6 |
# Since we need a clean cache directory, we'll use a temporary |
| 7 |
# systemtap directory and cache (add user name so make check and |
| 8 |
# sudo make installcheck don't clobber each others) |
| 9 |
set local_systemtap_dir [exec pwd]/.cache_test-[exec whoami] |
| 10 |
exec /bin/rm -rf $local_systemtap_dir |
| 11 |
if [info exists env(SYSTEMTAP_DIR)] { |
| 12 |
set old_systemtap_dir $env(SYSTEMTAP_DIR) |
| 13 |
} |
| 14 |
set env(SYSTEMTAP_DIR) $local_systemtap_dir |
| 15 |
|
| 16 |
#exp_internal 1 |
| 17 |
set rc [stapi_start "-vp4"] |
| 18 |
if {$rc} { return } |
| 19 |
|
| 20 |
set effective_uid [exec /usr/bin/id -u] |
| 21 |
|
| 22 |
foreach file [lsort [glob -nocomplain $srcdir/$self/*.stp]] { |
| 23 |
set test "${self}/[file tail $file]" |
| 24 |
set full_test "${test} ${test_suffix}" |
| 25 |
|
| 26 |
# Set default flags |
| 27 |
set guru_mode 0 |
| 28 |
set suppress_warnings 0 |
| 29 |
set panic_warnings 0 |
| 30 |
set timing 0 |
| 31 |
set unoptimized 0 |
| 32 |
|
| 33 |
# Most of the buildok test cases use '#! stap ...'. Try to read |
| 34 |
# this information. |
| 35 |
set f [open $file r] |
| 36 |
set firstbits [gets $f] |
| 37 |
close $f |
| 38 |
if [regexp -line {\#! stap (.*)} $firstbits -> stap_args] { |
| 39 |
verbose -log "running the equivalent of 'stap $stap_args $file'" |
| 40 |
# Parse arguments. |
| 41 |
set arg_fail 0 |
| 42 |
set skip_test 0 |
| 43 |
set last_pass "4" |
| 44 |
foreach arg $stap_args { |
| 45 |
if {[ string index $arg 0 ] != "-" } { break } |
| 46 |
set ch_idx 1 |
| 47 |
while {1} { |
| 48 |
set opt_ch [ string index $arg $ch_idx ] |
| 49 |
if { $opt_ch == "" } { break } |
| 50 |
incr ch_idx |
| 51 |
switch -- $opt_ch { |
| 52 |
p { |
| 53 |
# We're already doing p4. Ignore this option |
| 54 |
# as long as the next character is '4'. |
| 55 |
set opt_ch [ string index $arg $ch_idx ] |
| 56 |
incr ch_idx |
| 57 |
if { $opt_ch != "4" } { |
| 58 |
set last_pass $opt_ch |
| 59 |
break |
| 60 |
} |
| 61 |
continue |
| 62 |
} |
| 63 |
g { set guru_mode 1; continue } |
| 64 |
t { set timing 1; continue } |
| 65 |
w { set suppress_warnings 1; continue } |
| 66 |
W { set panic_warnings 1; continue } |
| 67 |
u { set unoptimized 1; continue } |
| 68 |
- { |
| 69 |
# Handle long arguments ("--FOO") by testing |
| 70 |
# the whole argument. |
| 71 |
switch -regexp -- $arg { |
| 72 |
{^--compatible=.*} { |
| 73 |
# We can't handle the '--compatible' |
| 74 |
# option. Once the library scripts |
| 75 |
# have been read, they are "set" at a |
| 76 |
# particular version and can't be |
| 77 |
# changed on the fly. |
| 78 |
set skip_test 1 |
| 79 |
verbose -log "unsupported option '${arg}'" |
| 80 |
} |
| 81 |
default { set arg_fail 1 } |
| 82 |
} |
| 83 |
if {$arg_fail} { |
| 84 |
verbose -log "unknown long argument '${arg}'" |
| 85 |
} |
| 86 |
break |
| 87 |
} |
| 88 |
default { |
| 89 |
verbose -log "unknown argument '${opt_ch}'" |
| 90 |
set arg_fail 1 |
| 91 |
break |
| 92 |
} |
| 93 |
} |
| 94 |
} |
| 95 |
} |
| 96 |
if {$arg_fail} { |
| 97 |
fail "${full_test} - arg parsing" |
| 98 |
continue |
| 99 |
} elseif {$skip_test} { |
| 100 |
untested "${full_test} - unsupported option" |
| 101 |
continue |
| 102 |
} else { |
| 103 |
pass "${full_test} - arg parsing" |
| 104 |
} |
| 105 |
if {$last_pass != "4"} { |
| 106 |
untested "$full_test - last pass isn't 4 ($last_pass)" |
| 107 |
continue |
| 108 |
} |
| 109 |
} else { |
| 110 |
# If "stap" wasn't on the first line of the script, this isn't |
| 111 |
# a systemtap script, but a shell script that will run |
| 112 |
# systemtap. We'll have to skip these. |
| 113 |
untested "$full_test - shell script" |
| 114 |
continue |
| 115 |
} |
| 116 |
|
| 117 |
# We need to "clean up" from our last run. First, delete the last |
| 118 |
# script. |
| 119 |
set rc [stapi_test_question "delete" "Delete entire script.*y or n.*" "y"] |
| 120 |
|
| 121 |
# Set all the flags, based on the arg parsing above. |
| 122 |
if {!$rc} {set rc [stapi_test_no_output "set guru_mode $guru_mode"] } |
| 123 |
if {!$rc} {set rc [stapi_test_no_output \ |
| 124 |
"set suppress_warnings $suppress_warnings"] } |
| 125 |
if {!$rc} {set rc [stapi_test_no_output \ |
| 126 |
"set panic_warnings $panic_warnings"] } |
| 127 |
if {!$rc} {set rc [stapi_test_no_output "set timing $timing"] } |
| 128 |
if {!$rc} {set rc [stapi_test_no_output \ |
| 129 |
"set unoptimized $unoptimized"] } |
| 130 |
switch -- $rc { |
| 131 |
0 { pass "${full_test} - reset" } |
| 132 |
1 { fail "${full_test} - reset"; break } |
| 133 |
-1 { fail "${full_test} - reset: crashed"; break } |
| 134 |
} |
| 135 |
|
| 136 |
# Now try to load the script. If the "load" command reports any |
| 137 |
# output, the script didn't load properly. |
| 138 |
set rc [stapi_test_no_output "load $file"] |
| 139 |
switch $rc { |
| 140 |
0 { pass "${full_test} - load" } |
| 141 |
1 { fail "${full_test} - load"; continue } |
| 142 |
-1 { fail "${full_test} - load: crashed"; break } |
| 143 |
} |
| 144 |
|
| 145 |
# Now try to compile the script by issuing the "run" command. |
| 146 |
verbose -log "Running $file" |
| 147 |
set rc [stapi_run_batch] |
| 148 |
if {$rc < 0} { |
| 149 |
switch -- $rc { |
| 150 |
-1 { fail "${full_test} - compile: crashed" } |
| 151 |
-2 { fail "${full_test} - compile timeout" } |
| 152 |
default { fail "${full_test} - unknown error" } |
| 153 |
} |
| 154 |
break |
| 155 |
} |
| 156 |
|
| 157 |
# Use setup_kfail <pr number> <target triplet> for known bugs. |
| 158 |
# |
| 159 |
# (Note that tcl doesn't like comments directly inside the switch |
| 160 |
# statement, but comments can go in sub-blocks.) |
| 161 |
switch -- $test { |
| 162 |
buildok/memory-write_shared_copy.stp { |
| 163 |
if {$rc == 1} { setup_kfail 1155 *-*-* } } |
| 164 |
|
| 165 |
buildok/memory-mmap.stp - |
| 166 |
buildok/memory-write_shared_copy.stp - |
| 167 |
buildok/networking-change_rx_flag.stp - |
| 168 |
buildok/nfs-fop.check_flags.stp - |
| 169 |
buildok/scheduler-cpu_off.stp - |
| 170 |
buildok/scheduler-cpu_on.stp - |
| 171 |
buildok/scheduler-ctxswitch.stp - |
| 172 |
buildok/scheduler-migrate.stp - |
| 173 |
buildok/signal-check_ignored.stp - |
| 174 |
buildok/signal-handle.stp - |
| 175 |
buildok/tty-resize.stp { |
| 176 |
# (Note that if a test fails because of debuginfo-quality |
| 177 |
# problems, don't kfail a tapset's entire test. Extract |
| 178 |
# the failing probe/function's test into a new file and |
| 179 |
# kfail that.) |
| 180 |
# |
| 181 |
# Use setup_kfail GCC <target triplet> for |
| 182 |
# debuginfo-quality problems. |
| 183 |
if {$rc == 1} { setup_kfail GCC *-*-* } } |
| 184 |
|
| 185 |
buildok/per-process-syscall.stp - |
| 186 |
buildok/utrace.stp { |
| 187 |
# Use setup_kfail UTRACE <target triplet> for systems |
| 188 |
# without utrace. |
| 189 |
if {$rc == 1 && ![utrace_p]} { setup_kfail UTRACE *-*-*} } |
| 190 |
|
| 191 |
buildok/fortyfour.stp - |
| 192 |
buildok/map_probe_cond.stp - |
| 193 |
buildok/pretty-uprobes.stp - |
| 194 |
buildok/pretty-uprobes.stp - |
| 195 |
buildok/ucontext-symbols-embedded.stp - |
| 196 |
buildok/ucontext-unwind-embedded.stp { |
| 197 |
# Use setup_kfail UPROBES <target triplet> for systems |
| 198 |
# without uprobes. (ia64 has utrace, but not uprobes.) |
| 199 |
if {$rc == 1 && ![uprobes_p]} { setup_kfail UPROBES *-*-* } } |
| 200 |
|
| 201 |
buildok/twentyeightprime.stp { |
| 202 |
# Use setup_kfail UPROBES <target triplet> for systems |
| 203 |
# without uprobes. (ia64 has utrace, but not uprobes.) |
| 204 |
if {$rc == 1 && ![uprobes_p]} { setup_kfail UPROBES *-*-* } |
| 205 |
|
| 206 |
# Use setup_kfail INODE_UPROBES <target triplet> for |
| 207 |
# systems with inode uprobes, where absolute probes don't |
| 208 |
# work. |
| 209 |
if {$rc == 1 && [inode_uprobes_p]} { |
| 210 |
setup_kfail INODE_UPROBES *-*-* } |
| 211 |
} |
| 212 |
|
| 213 |
buildok/context-symbols-embedded.stp - |
| 214 |
buildok/context-unwind-embedded.stp { |
| 215 |
# Use setup_kfail UNWIND <target triplet> for systems |
| 216 |
# with an unsupported dwarf unwind architecture |
| 217 |
if {$rc == 1 && [istarget ia64-*-*]} { |
| 218 |
setup_kfail UNWIND ia64-*-* } } |
| 219 |
|
| 220 |
buildok/fortyseven.stp { |
| 221 |
if {$rc == 1} { setup_kfail 15065 *-*-* } } |
| 222 |
|
| 223 |
buildok/stap_staticmarkers-detailed.stp { |
| 224 |
# Use setup_kfail ROOT_ONLY for tests that must be run as |
| 225 |
# root. |
| 226 |
# |
| 227 |
# In the case of stap_staticmarkers-detailed.stp, it |
| 228 |
# probes "staprun", which is only readable by root. |
| 229 |
if {$rc != 0 && $effective_uid != 0} { |
| 230 |
setup_kfail ROOT_ONLY *-*-* } |
| 231 |
|
| 232 |
# Use setup_kfail UPROBES <target triplet> for systems |
| 233 |
# without uprobes. (ia64 has utrace, but not uprobes.) |
| 234 |
if {$rc != 0 && ![uprobes_p]} { setup_kfail UPROBES *-*-* } |
| 235 |
} |
| 236 |
|
| 237 |
buildok/hwbkpt.stp { |
| 238 |
if {$rc != 0 && ![hwbkpt_probes_p]} { setup_kfail HWBKPT *-*-* } } |
| 239 |
} |
| 240 |
switch -- $rc { |
| 241 |
0 { pass "${full_test} - compile" } |
| 242 |
1 { fail "${full_test} - compile"; continue } |
| 243 |
2 { fail "${full_test} - compile: cache used"; continue } |
| 244 |
} |
| 245 |
|
| 246 |
# If we're here, then the previous compilation worked. Compile the |
| 247 |
# script again, making sure the cache was used. |
| 248 |
verbose -log "Running $file again" |
| 249 |
set rc [stapi_run_batch 1] |
| 250 |
switch -- $rc { |
| 251 |
-1 { fail "${full_test} - cached compile: crashed"; break } |
| 252 |
0 { pass "${full_test} - cached compile" } |
| 253 |
1 { fail "${full_test} - cached compile" } |
| 254 |
2 { fail "${full_test} - cached compile: no cache use" } |
| 255 |
} |
| 256 |
} |
| 257 |
|
| 258 |
# Cleanup. |
| 259 |
stapi_exit |
| 260 |
exec /bin/rm -rf $local_systemtap_dir |
| 261 |
if [info exists old_systemtap_dir] { |
| 262 |
set env(SYSTEMTAP_DIR) $old_systemtap_dir |
| 263 |
} else { |
| 264 |
unset env(SYSTEMTAP_DIR) |
| 265 |
} |