| 1 |
# The mimic3-generic output module is based on the generic plugin for Speech |
| 2 |
# Dispatcher. It means there is no code written explicitly for |
| 3 |
# this plugin, all the specifics are handled in this configuration |
| 4 |
# and we call a simple command line client to perform the actual |
| 5 |
# synthesis. Use this config file with the sd_generic output module. |
| 6 |
|
| 7 |
# Debug turns debugging on or off |
| 8 |
# See speechd.conf for information where debugging information is stored |
| 9 |
Debug 0 |
| 10 |
|
| 11 |
# IMPORTANT: The audio output method relies on an audio playback |
| 12 |
# utility (play, aplay, paplay for OSS, ALSA or Pulse) |
| 13 |
# being installed. If this is not the case, consider installing it |
| 14 |
# or replace the $PLAY_COMMAND string in the GenericExecuteString below |
| 15 |
# with play, paplay or similar. |
| 16 |
# |
| 17 |
# GenericExecuteSynth is the shell command that should be |
| 18 |
# executed in order to say some message. This command must |
| 19 |
# stop saying the message on SIGKILL, otherwise it's useless. |
| 20 |
# You can use the variables $LANGUAGE, $VOICE, $PITCH and $RATE |
| 21 |
# which will be substituted for the appropriate value (you |
| 22 |
# can modify this value, see other parameters). |
| 23 |
# This line uses the command curl, so you might need to install |
| 24 |
# curl if it isn't already installed. |
| 25 |
# The command can be split into more lines, if necessary, using '\'. |
| 26 |
GenericExecuteSynth \ |
| 27 |
"printf %s \'$DATA\' | mimic3 --remote --voice \'$VOICE\' --stdout | $PLAY_COMMAND" |
| 28 |
|
| 29 |
GenericCmdDependency "mimic3" |
| 30 |
GenericSoundIconFolder "/usr/share/sounds/sound-icons/" |
| 31 |
|
| 32 |
# The following three items control punctuation levels None, Some, and All. |
| 33 |
# Each of these values will be substituted into the $PUNCT variable depending |
| 34 |
# on the value passed to speech dispatcher from applications. |
| 35 |
# Note that if an empty string is specified, then $PUNCT will be blank |
| 36 |
# which is a default situation for espeak. |
| 37 |
|
| 38 |
GenericPunctNone "" |
| 39 |
GenericPunctSome "--punct=\"()[]{};:\"" |
| 40 |
GenericPunctMost "--punct=\"()[]{};:\"" |
| 41 |
GenericPunctAll "--punct" |
| 42 |
|
| 43 |
# GenericStripPunctChars is a list (enclosed in doublequotes) of |
| 44 |
# all the characters that should be replaced by whitespaces in |
| 45 |
# order not to be badly handled by the output module or misinterpreted |
| 46 |
# by shell. |
| 47 |
#GenericStripPunctChars "" |
| 48 |
|
| 49 |
# If the language you need to pass in $LANGUAGE is different |
| 50 |
# from the standard ISO language code, you can specify |
| 51 |
# which string to use instead. If you wish to use |
| 52 |
# other than ISO charset for the specified language, |
| 53 |
# you can add it's name (as accepted by iconv) as a |
| 54 |
# third parameter in doublequotes, or use GenericDefaultCharset |
| 55 |
# to specify it |
| 56 |
|
| 57 |
#GenericLanguage "en" "en_GB" "utf-8" |
| 58 |
#GenericLanguage "en" "en_US" "utf-8" |
| 59 |
#GenericDefaultCharset "utf-8" |
| 60 |
|
| 61 |
# AddVoice specifies which $VOICE string should be assigned to |
| 62 |
# each language and symbolic voice name. All the voices you want |
| 63 |
# to use must be specified here. This list will likely not be |
| 64 |
# up-to-date, please check your mimic3 installation and add the voices |
| 65 |
# you want to use. |
| 66 |
|
| 67 |
AddVoice "af" "FEMALE1" "af_ZA/google-nwu_low" |
| 68 |
AddVoice "bn" "FEMALE1" "bn/multi_low" |
| 69 |
AddVoice "de" "MALE1" "de_DE/thorsten_low" |
| 70 |
AddVoice "de" "MALE2" "de_DE/thorsten-emotion_low" |
| 71 |
AddVoice "de" "MALE3" "de_DE/m-ailabs_low" |
| 72 |
AddVoice "el" "FEMALE1" "el_GR/rapunzelina_low" |
| 73 |
AddVoice "en" "MALE1" "en_UK/apope_low" |
| 74 |
AddVoice "en" "MALE1" "en_US/hifi-tts_low" |
| 75 |
AddVoice "en" "FEMALE1" "en_US/ljspeech_low" |
| 76 |
AddVoice "en" "MALE2" "en_US/m-ailabs_low" |
| 77 |
AddVoice "en" "MALE3" "en_US/cmu-arctic_low" |
| 78 |
AddVoice "en" "FEMALE2" "en_US/vctk_low" |
| 79 |
AddVoice "es" "MALE1" "es_ES/carlfm_low" |
| 80 |
AddVoice "es" "MALE2" "es_ES/m-ailabs_low" |
| 81 |
AddVoice "fa" "FEMALE1" "fa/haaniye_low" |
| 82 |
AddVoice "fi" "MALE1" "fi_FI/harri-tapani-ylilammi_low" |
| 83 |
AddVoice "fr" "FEMALE1" "fr_FR/m-ailabs_low" |
| 84 |
AddVoice "fr" "FEMALE2" "fr_FR/siwis_low" |
| 85 |
AddVoice "fr" "MALE1" "fr_FR/tom_low" |
| 86 |
AddVoice "gu" "FEMALE1" "gu_IN/cmu-indic_low" |
| 87 |
AddVoice "ha" "MALE1" "ha_NE/openbible_low" |
| 88 |
AddVoice "hu" "FEMALE1" "hu_HU/diana-majlinger_low" |
| 89 |
AddVoice "it" "MALE1" "it_IT/mls_low" |
| 90 |
AddVoice "it" "MALE2" "it_IT/riccardo-fasol_low" |
| 91 |
AddVoice "jv" "MALE1" "jv_ID/google-gmu_low" |
| 92 |
AddVoice "ko" "FEMALE1" "ko_KO/kss_low" |
| 93 |
AddVoice "ne" "FEMALE1" "ne_NP/ne-google_low" |
| 94 |
AddVoice "nl" "MALE1" "nl/bart-de-leeuw_low" |
| 95 |
AddVoice "nl" "MALE2" "nl/flemishguy_low" |
| 96 |
AddVoice "nl" "FEMALE1" "nl/nathalie_low" |
| 97 |
AddVoice "nl" "MALE3" "nl/pmk_low" |
| 98 |
AddVoice "nl" "MALE4" "nl/rdh_low" |
| 99 |
AddVoice "pl" "FEMALE1" "pl_PL/m-ailabs_low" |
| 100 |
AddVoice "ru" "FEMALE1" "ru_RU/multi_low" |
| 101 |
AddVoice "sw" "MALE1" "sw/lanfrica_low" |
| 102 |
AddVoice "te" "MALE1" "te_IN/cmu-indic_low" |
| 103 |
AddVoice "tn" "FEMALE1" "tn_ZA/google-nwu_low" |
| 104 |
AddVoice "uk" "MALE1" "uk_UK/m-ailabs_low" |
| 105 |
AddVoice "vi" "FEMALE1" "vi_VN/vais1000_low" |
| 106 |
AddVoice "to" "MALE1" "yo/openbible_low" |
| 107 |
|
| 108 |
# DefaultVoice specifies which $VOICE string should be used if no voice is |
| 109 |
# specified otherwise. |
| 110 |
|
| 111 |
DefaultVoice "en_UK/apope_low" |
| 112 |
|
| 113 |
# Copyright (C) 2018 Florian Steinhardt <[email protected]> |
| 114 |
# Copyright (C) 2022, 2025 Samuel Thibault <[email protected]> |
| 115 |
# |
| 116 |
# This program is free software; you can redistribute it and/or modify it under |
| 117 |
# the terms of the GNU General Public License as published by the Free Software |
| 118 |
# Foundation; either version 2 of the License, or (at your option) any later |
| 119 |
# version. |
| 120 |
# |
| 121 |
# This program is distributed in the hope that it will be useful, but WITHOUT ANY |
| 122 |
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| 123 |
# PARTICULAR PURPOSE. See the GNU General Public License for more details (file |
| 124 |
# COPYING in the root directory). |
| 125 |
# |
| 126 |
# You should have received a copy of the GNU General Public License |
| 127 |
# along with this program. If not, see <https://www.gnu.org/licenses/>. |