Debian Codegraph @

ctdb/config/events/legacy/11.natgw.script

raw
1 #!/bin/sh
2 # Script to set up one of the nodes as a NAT gateway for all other nodes.
3 # This is used to ensure that all nodes in the cluster can still originate
4 # traffic to the external network even if there are no public addresses
5 # available.
6 #
7
8 [ -n "$CTDB_BASE" ] || \
9 CTDB_BASE=$(d="$(dirname "$0")" && cd -P "$d/../../" && pwd)
10
11 . "${CTDB_BASE}/functions"
12
13 service_name="natgw"
14
15 load_script_options
16
17 [ -n "$CTDB_NATGW_NODES" ] || exit 0
18 export CTDB_NATGW_NODES
19
20 ctdb_setup_state_dir "failover" "$service_name"
21
22 # script_state_dir set by ctdb_setup_state_dir()
23 # shellcheck disable=SC2154
24 natgw_cfg_new="${script_state_dir}/cfg_new"
25 natgw_cfg_old="${script_state_dir}/cfg_old"
26 natgw_leader_old="${script_state_dir}/leader_old"
27
28 ctdb_natgw_follower_only ()
29 {
30 _ip_address=$(ctdb_get_ip_address)
31
32 awk -v my_ip="$_ip_address" \
33 '$1 == my_ip { if ($2 ~ "follower-only") { exit 0 } else { exit 1 } }' \
34 "$CTDB_NATGW_NODES"
35 }
36
37 natgw_check_config ()
38 {
39 [ -r "$CTDB_NATGW_NODES" ] || \
40 die "error: CTDB_NATGW_NODES=${CTDB_NATGW_NODES} unreadable"
41 if ! ctdb_natgw_follower_only ; then
42 [ -n "$CTDB_NATGW_PUBLIC_IP" ] || \
43 die "Invalid configuration: CTDB_NATGW_PUBLIC_IP not set"
44 [ -n "$CTDB_NATGW_PUBLIC_IFACE" ] || \
45 die "Invalid configuration: CTDB_NATGW_PUBLIC_IFACE not set"
46 fi
47 [ -n "$CTDB_NATGW_PRIVATE_NETWORK" ] || \
48 die "Invalid configuration: CTDB_NATGW_PRIVATE_NETWORK not set"
49
50 # The default is to create a single default route
51 [ -n "$CTDB_NATGW_STATIC_ROUTES" ] || CTDB_NATGW_STATIC_ROUTES="0.0.0.0/0"
52 }
53
54 natgw_write_config ()
55 {
56 _f="$1"
57
58 cat >"$_f" <<EOF
59 CTDB_NATGW_NODES="$CTDB_NATGW_NODES"
60 CTDB_NATGW_PUBLIC_IP="$CTDB_NATGW_PUBLIC_IP"
61 CTDB_NATGW_PUBLIC_IFACE="$CTDB_NATGW_PUBLIC_IFACE"
62 CTDB_NATGW_DEFAULT_GATEWAY="$CTDB_NATGW_DEFAULT_GATEWAY"
63 CTDB_NATGW_PRIVATE_NETWORK="$CTDB_NATGW_PRIVATE_NETWORK"
64 CTDB_NATGW_STATIC_ROUTES="$CTDB_NATGW_STATIC_ROUTES"
65 EOF
66 }
67
68 natgw_config_has_changed ()
69 {
70 natgw_write_config "$natgw_cfg_new"
71
72 # Non-existent old returns true, no log message
73 if [ ! -f "$natgw_cfg_old" ] ; then
74 return 0
75 fi
76
77 # Handle no change
78 if cmp "$natgw_cfg_old" "$natgw_cfg_new" >/dev/null 2>&1 ; then
79 return 1
80 fi
81
82 echo "NAT gateway configuration has changed"
83 return 0
84 }
85
86 _natgw_clear ()
87 {
88 _ip="${CTDB_NATGW_PUBLIC_IP%/*}"
89 _maskbits="${CTDB_NATGW_PUBLIC_IP#*/}"
90
91 delete_ip_from_iface \
92 "$CTDB_NATGW_PUBLIC_IFACE" "$_ip" "$_maskbits" >/dev/null 2>&1
93 for _net_gw in $CTDB_NATGW_STATIC_ROUTES ; do
94 _net="${_net_gw%@*}"
95 ip route del "$_net" metric 10 >/dev/null 2>/dev/null
96 done
97
98 # Delete the masquerading setup from a previous iteration where we
99 # were the NAT-GW
100 iptables -D POSTROUTING -t nat \
101 -s "$CTDB_NATGW_PRIVATE_NETWORK" ! -d "$CTDB_NATGW_PRIVATE_NETWORK" \
102 -j MASQUERADE >/dev/null 2>/dev/null
103
104 iptables -D INPUT -p tcp --syn -d "${_ip}/32" -j REJECT 2>/dev/null
105 }
106
107 natgw_clear ()
108 {
109 if [ -r "$natgw_cfg_old" ] ; then
110 (. "$natgw_cfg_old" ; _natgw_clear)
111 else
112 _natgw_clear
113 fi
114 }
115
116 natgw_set_leader ()
117 {
118 set_proc sys/net/ipv4/ip_forward 1
119 iptables -A POSTROUTING -t nat \
120 -s "$CTDB_NATGW_PRIVATE_NETWORK" ! -d "$CTDB_NATGW_PRIVATE_NETWORK" \
121 -j MASQUERADE
122
123 # block all incoming connections to the NATGW IP address
124 ctdb_natgw_public_ip_host="${CTDB_NATGW_PUBLIC_IP%/*}/32"
125 iptables -D INPUT -p tcp --syn \
126 -d "$ctdb_natgw_public_ip_host" -j REJECT 2>/dev/null
127 iptables -I INPUT -p tcp --syn \
128 -d "$ctdb_natgw_public_ip_host" -j REJECT 2>/dev/null
129
130 ip addr add "$CTDB_NATGW_PUBLIC_IP" dev "$CTDB_NATGW_PUBLIC_IFACE"
131 for _net_gw in $CTDB_NATGW_STATIC_ROUTES ; do
132 _net="${_net_gw%@*}"
133 if [ "$_net" != "$_net_gw" ] ; then
134 _gw="${_net_gw#*@}"
135 else
136 _gw="$CTDB_NATGW_DEFAULT_GATEWAY"
137 fi
138
139 [ -n "$_gw" ] || continue
140 ip route add "$_net" metric 10 via "$_gw"
141 done
142 }
143
144 natgw_set_follower ()
145 {
146 _natgwip="$1"
147
148 for _net_gw in $CTDB_NATGW_STATIC_ROUTES ; do
149 _net="${_net_gw%@*}"
150 ip route add "$_net" via "$_natgwip" metric 10
151 done
152 }
153
154 natgw_ensure_leader ()
155 {
156 # Intentional word splitting here
157 # shellcheck disable=SC2046
158 set -- $("${CTDB_HELPER_BINDIR}/ctdb_natgw" leader)
159 natgwleader="${1:--1}" # Default is -1, for failure above
160 natgwip="$2"
161
162 if [ "$natgwleader" = "-1" ]; then
163 # Fail...
164 die "There is no NATGW leader node"
165 fi
166 }
167
168 natgw_leader_has_changed ()
169 {
170 if [ -r "$natgw_leader_old" ] ; then
171 read _old_natgwleader <"$natgw_leader_old"
172 else
173 _old_natgwleader=""
174 fi
175 [ "$_old_natgwleader" != "$natgwleader" ]
176 }
177
178 natgw_save_state ()
179 {
180 echo "$natgwleader" >"$natgw_leader_old"
181 # Created by natgw_config_has_changed()
182 mv "$natgw_cfg_new" "$natgw_cfg_old"
183 }
184
185
186 case "$1" in
187 setup)
188 natgw_check_config
189 ;;
190
191 startup)
192 natgw_check_config
193
194 # Error if CTDB_NATGW_PUBLIC_IP is listed in public addresses
195 ip_pat=$(echo "$CTDB_NATGW_PUBLIC_IP" | sed -e 's@\.@\\.@g')
196 ctdb_public_addresses="${CTDB_BASE}/public_addresses"
197 if grep -q "^${ip_pat}[[:space:]]" "$ctdb_public_addresses" ; then
198 die "ERROR: CTDB_NATGW_PUBLIC_IP same as a public address"
199 fi
200
201 # do not send out arp requests from loopback addresses
202 set_proc sys/net/ipv4/conf/all/arp_announce 2
203 ;;
204
205 updatenatgw|ipreallocated)
206 natgw_check_config
207
208 natgw_ensure_leader
209
210 natgw_config_has_changed || natgw_leader_has_changed || exit 0
211
212 natgw_clear
213
214 pnn=$(ctdb_get_pnn)
215 if [ "$pnn" = "$natgwleader" ]; then
216 natgw_set_leader
217 else
218 natgw_set_follower "$natgwip"
219 fi
220
221 # flush our route cache
222 set_proc sys/net/ipv4/route/flush 1
223
224 # Only update saved state when NATGW successfully updated
225 natgw_save_state
226 ;;
227
228 shutdown|removenatgw)
229 natgw_check_config
230 natgw_clear
231 ;;
232
233 monitor)
234 natgw_check_config
235
236 if [ -n "$CTDB_NATGW_PUBLIC_IFACE" ] ; then
237 interface_monitor "$CTDB_NATGW_PUBLIC_IFACE" || exit 1
238 fi
239 ;;
240 esac
241
242 exit 0