| 1 |
# |
| 2 |
# qmake configuration for the NXP i.MX8 based boards (64-bit) |
| 3 |
# |
| 4 |
# The configuration below is set up for running with the fbdev-style |
| 5 |
# Vivante graphics stack. (so eglfs with the eglfs_viv backend, no |
| 6 |
# direct drm use via eglfs_kms) |
| 7 |
|
| 8 |
# Wayland should also be functional. However, when writing Wayland |
| 9 |
# *compositors* with Qt, the eglfs backend will have to be switched to |
| 10 |
# eglfs_viv_wl by setting the QT_QPA_EGLFS_INTEGRATION environment |
| 11 |
# variable. |
| 12 |
# |
| 13 |
# Below is an example configure line that assumes there is an AArch64 |
| 14 |
# toolchain and sysroot available in $HOME/imx8. On device Qt is |
| 15 |
# expected to be placed under /usr/local/qt514 whereas on the host |
| 16 |
# 'make install' will copy the host tools and the target libraries to |
| 17 |
# $HOME/imx8/qt5. |
| 18 |
# |
| 19 |
# ./configure -release -opengl es2 -device linux-imx8-g++ \ |
| 20 |
# -device-option CROSS_COMPILE=~/imx8/toolchain/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux- \ |
| 21 |
# -sysroot ~/imx8/sysroot \ |
| 22 |
# -opensource -confirm-license -make libs -prefix /usr/local/qt514 -extprefix ~/imx8/qt5 -v |
| 23 |
|
| 24 |
include(../common/linux_device_pre.conf) |
| 25 |
|
| 26 |
QMAKE_LIBS_EGL += -lEGL |
| 27 |
QMAKE_LIBS_OPENGL_ES2 += -lGLESv2 -lEGL -lGAL |
| 28 |
QMAKE_LIBS_OPENVG += -lOpenVG -lEGL -lGAL |
| 29 |
|
| 30 |
IMX8_CFLAGS = -march=armv8-a -mtune=cortex-a72.cortex-a53 -DLINUX=1 -DEGL_API_FB=1 |
| 31 |
QMAKE_CFLAGS += $$IMX8_CFLAGS |
| 32 |
QMAKE_CXXFLAGS += $$IMX8_CFLAGS |
| 33 |
|
| 34 |
DISTRO_OPTS += aarch64 |
| 35 |
|
| 36 |
# Preferred eglfs backend |
| 37 |
EGLFS_DEVICE_INTEGRATION = eglfs_viv |
| 38 |
|
| 39 |
include(../common/linux_arm_device_post.conf) |
| 40 |
|
| 41 |
load(qt_config) |