| 1 |
# |
| 2 |
# qmake configuration for the Freescale iMX6 boards (single, dual and quad) |
| 3 |
# |
| 4 |
# The configuration below is set up for running with EGL on the framebuffer via |
| 5 |
# the eglfs platform plugin and its eglfs_viv backend. |
| 6 |
|
| 7 |
# Wayland is also fully functional out of the box. However, when writing Wayland |
| 8 |
# *compositors* with Qt, the eglfs backend will have to be switched to |
| 9 |
# eglfs_viv_wl by setting the QT_QPA_EGLFS_INTEGRATION environment variable. |
| 10 |
# |
| 11 |
# Below is an example configure line that assumes the SDK is in |
| 12 |
# $HOME/imx6/toolchain. On device Qt is expected to be placed under |
| 13 |
# /usr/local/qt5 whereas on the host 'make install' will copy the host tools and |
| 14 |
# the target libraries to $HOME/imx6/qt5. |
| 15 |
# |
| 16 |
# ./configure -prefix /usr/local/qt5 -extprefix $HOME/imx6/qt5 -device linux-imx6-g++ \ |
| 17 |
# -device-option CROSS_COMPILE=$HOME/imx6/toolchain/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- \ |
| 18 |
# -sysroot $HOME/imx6/toolchain/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi \ |
| 19 |
# -nomake examples -nomake tests -v |
| 20 |
# |
| 21 |
|
| 22 |
include(../common/linux_device_pre.conf) |
| 23 |
|
| 24 |
QMAKE_LIBS_EGL += -lEGL |
| 25 |
QMAKE_LIBS_OPENGL_ES2 += -lGLESv2 -lEGL -lGAL |
| 26 |
QMAKE_LIBS_OPENVG += -lOpenVG -lEGL -lGAL |
| 27 |
|
| 28 |
IMX6_CFLAGS = -march=armv7-a -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 |
| 29 |
QMAKE_CFLAGS += $$IMX6_CFLAGS |
| 30 |
QMAKE_CXXFLAGS += $$IMX6_CFLAGS |
| 31 |
|
| 32 |
DISTRO_OPTS += hard-float |
| 33 |
|
| 34 |
# Preferred eglfs backend |
| 35 |
EGLFS_DEVICE_INTEGRATION = eglfs_viv |
| 36 |
|
| 37 |
include(../common/linux_arm_device_post.conf) |
| 38 |
|
| 39 |
load(qt_config) |