| 1 |
:mod:`!lzma` --- Compression using the LZMA algorithm |
| 2 |
===================================================== |
| 3 |
|
| 4 |
.. module:: lzma |
| 5 |
:synopsis: A Python wrapper for the liblzma compression library. |
| 6 |
|
| 7 |
.. moduleauthor:: Nadeem Vawda <[email protected]> |
| 8 |
.. sectionauthor:: Nadeem Vawda <[email protected]> |
| 9 |
|
| 10 |
.. versionadded:: 3.3 |
| 11 |
|
| 12 |
**Source code:** :source:`Lib/lzma.py` |
| 13 |
|
| 14 |
-------------- |
| 15 |
|
| 16 |
This module provides classes and convenience functions for compressing and |
| 17 |
decompressing data using the LZMA compression algorithm. Also included is a file |
| 18 |
interface supporting the ``.xz`` and legacy ``.lzma`` file formats used by the |
| 19 |
:program:`xz` utility, as well as raw compressed streams. |
| 20 |
|
| 21 |
The interface provided by this module is very similar to that of the :mod:`bz2` |
| 22 |
module. Note that :class:`LZMAFile` and :class:`bz2.BZ2File` are *not* |
| 23 |
thread-safe, so if you need to use a single :class:`LZMAFile` instance |
| 24 |
from multiple threads, it is necessary to protect it with a lock. |
| 25 |
|
| 26 |
|
| 27 |
.. exception:: LZMAError |
| 28 |
|
| 29 |
This exception is raised when an error occurs during compression or |
| 30 |
decompression, or while initializing the compressor/decompressor state. |
| 31 |
|
| 32 |
|
| 33 |
Reading and writing compressed files |
| 34 |
------------------------------------ |
| 35 |
|
| 36 |
.. function:: open(filename, mode="rb", *, format=None, check=-1, preset=None, filters=None, encoding=None, errors=None, newline=None) |
| 37 |
|
| 38 |
Open an LZMA-compressed file in binary or text mode, returning a :term:`file |
| 39 |
object`. |
| 40 |
|
| 41 |
The *filename* argument can be either an actual file name (given as a |
| 42 |
:class:`str`, :class:`bytes` or :term:`path-like <path-like object>` object), in |
| 43 |
which case the named file is opened, or it can be an existing file object |
| 44 |
to read from or write to. |
| 45 |
|
| 46 |
The *mode* argument can be any of ``"r"``, ``"rb"``, ``"w"``, ``"wb"``, |
| 47 |
``"x"``, ``"xb"``, ``"a"`` or ``"ab"`` for binary mode, or ``"rt"``, |
| 48 |
``"wt"``, ``"xt"``, or ``"at"`` for text mode. The default is ``"rb"``. |
| 49 |
|
| 50 |
When opening a file for reading, the *format* and *filters* arguments have |
| 51 |
the same meanings as for :class:`LZMADecompressor`. In this case, the *check* |
| 52 |
and *preset* arguments should not be used. |
| 53 |
|
| 54 |
When opening a file for writing, the *format*, *check*, *preset* and |
| 55 |
*filters* arguments have the same meanings as for :class:`LZMACompressor`. |
| 56 |
|
| 57 |
For binary mode, this function is equivalent to the :class:`LZMAFile` |
| 58 |
constructor: ``LZMAFile(filename, mode, ...)``. In this case, the *encoding*, |
| 59 |
*errors* and *newline* arguments must not be provided. |
| 60 |
|
| 61 |
For text mode, a :class:`LZMAFile` object is created, and wrapped in an |
| 62 |
:class:`io.TextIOWrapper` instance with the specified encoding, error |
| 63 |
handling behavior, and line ending(s). |
| 64 |
|
| 65 |
.. versionchanged:: 3.4 |
| 66 |
Added support for the ``"x"``, ``"xb"`` and ``"xt"`` modes. |
| 67 |
|
| 68 |
.. versionchanged:: 3.6 |
| 69 |
Accepts a :term:`path-like object`. |
| 70 |
|
| 71 |
|
| 72 |
.. class:: LZMAFile(filename=None, mode="r", *, format=None, check=-1, preset=None, filters=None) |
| 73 |
|
| 74 |
Open an LZMA-compressed file in binary mode. |
| 75 |
|
| 76 |
An :class:`LZMAFile` can wrap an already-open :term:`file object`, or operate |
| 77 |
directly on a named file. The *filename* argument specifies either the file |
| 78 |
object to wrap, or the name of the file to open (as a :class:`str`, |
| 79 |
:class:`bytes` or :term:`path-like <path-like object>` object). When wrapping an |
| 80 |
existing file object, the wrapped file will not be closed when the |
| 81 |
:class:`LZMAFile` is closed. |
| 82 |
|
| 83 |
The *mode* argument can be either ``"r"`` for reading (default), ``"w"`` for |
| 84 |
overwriting, ``"x"`` for exclusive creation, or ``"a"`` for appending. These |
| 85 |
can equivalently be given as ``"rb"``, ``"wb"``, ``"xb"`` and ``"ab"`` |
| 86 |
respectively. |
| 87 |
|
| 88 |
If *filename* is a file object (rather than an actual file name), a mode of |
| 89 |
``"w"`` does not truncate the file, and is instead equivalent to ``"a"``. |
| 90 |
|
| 91 |
When opening a file for reading, the input file may be the concatenation of |
| 92 |
multiple separate compressed streams. These are transparently decoded as a |
| 93 |
single logical stream. |
| 94 |
|
| 95 |
When opening a file for reading, the *format* and *filters* arguments have |
| 96 |
the same meanings as for :class:`LZMADecompressor`. In this case, the *check* |
| 97 |
and *preset* arguments should not be used. |
| 98 |
|
| 99 |
When opening a file for writing, the *format*, *check*, *preset* and |
| 100 |
*filters* arguments have the same meanings as for :class:`LZMACompressor`. |
| 101 |
|
| 102 |
:class:`LZMAFile` supports all the members specified by |
| 103 |
:class:`io.BufferedIOBase`, except for :meth:`~io.BufferedIOBase.detach` |
| 104 |
and :meth:`~io.IOBase.truncate`. |
| 105 |
Iteration and the :keyword:`with` statement are supported. |
| 106 |
|
| 107 |
The following method and attributes are also provided: |
| 108 |
|
| 109 |
.. method:: peek(size=-1) |
| 110 |
|
| 111 |
Return buffered data without advancing the file position. At least one |
| 112 |
byte of data will be returned, unless EOF has been reached. The exact |
| 113 |
number of bytes returned is unspecified (the *size* argument is ignored). |
| 114 |
|
| 115 |
.. note:: While calling :meth:`peek` does not change the file position of |
| 116 |
the :class:`LZMAFile`, it may change the position of the underlying |
| 117 |
file object (e.g. if the :class:`LZMAFile` was constructed by passing a |
| 118 |
file object for *filename*). |
| 119 |
|
| 120 |
.. attribute:: mode |
| 121 |
|
| 122 |
``'rb'`` for reading and ``'wb'`` for writing. |
| 123 |
|
| 124 |
.. versionadded:: 3.13 |
| 125 |
|
| 126 |
.. attribute:: name |
| 127 |
|
| 128 |
The lzma file name. Equivalent to the :attr:`~io.FileIO.name` |
| 129 |
attribute of the underlying :term:`file object`. |
| 130 |
|
| 131 |
.. versionadded:: 3.13 |
| 132 |
|
| 133 |
|
| 134 |
.. versionchanged:: 3.4 |
| 135 |
Added support for the ``"x"`` and ``"xb"`` modes. |
| 136 |
|
| 137 |
.. versionchanged:: 3.5 |
| 138 |
The :meth:`~io.BufferedIOBase.read` method now accepts an argument of |
| 139 |
``None``. |
| 140 |
|
| 141 |
.. versionchanged:: 3.6 |
| 142 |
Accepts a :term:`path-like object`. |
| 143 |
|
| 144 |
|
| 145 |
Compressing and decompressing data in memory |
| 146 |
-------------------------------------------- |
| 147 |
|
| 148 |
.. class:: LZMACompressor(format=FORMAT_XZ, check=-1, preset=None, filters=None) |
| 149 |
|
| 150 |
Create a compressor object, which can be used to compress data incrementally. |
| 151 |
|
| 152 |
For a more convenient way of compressing a single chunk of data, see |
| 153 |
:func:`compress`. |
| 154 |
|
| 155 |
The *format* argument specifies what container format should be used. |
| 156 |
Possible values are :const:`FORMAT_XZ` (the default), |
| 157 |
:const:`FORMAT_ALONE` and :const:`FORMAT_RAW`. |
| 158 |
|
| 159 |
The *check* argument specifies the type of integrity check to include in the |
| 160 |
compressed data. This check is used when decompressing, to ensure that the |
| 161 |
data has not been corrupted. Possible values are :const:`CHECK_NONE`, |
| 162 |
:const:`CHECK_CRC32`, :const:`CHECK_CRC64` (the default for |
| 163 |
:const:`FORMAT_XZ`) and :const:`CHECK_SHA256`. |
| 164 |
|
| 165 |
If the specified check is not supported, an :class:`LZMAError` is raised. |
| 166 |
|
| 167 |
The compression settings can be specified either as a preset compression |
| 168 |
level (with the *preset* argument), or in detail as a custom filter chain |
| 169 |
(with the *filters* argument). |
| 170 |
|
| 171 |
The *preset* argument (if provided) should be an integer between ``0`` and |
| 172 |
``9`` (inclusive), optionally OR-ed with the constant |
| 173 |
:const:`PRESET_EXTREME`. If neither *preset* nor *filters* are given, the |
| 174 |
default behavior is to use :const:`PRESET_DEFAULT` (preset level ``6``). |
| 175 |
Higher presets produce smaller output, but make the compression process |
| 176 |
slower. |
| 177 |
|
| 178 |
.. note:: |
| 179 |
|
| 180 |
In addition to being more CPU-intensive, compression with higher presets |
| 181 |
also requires much more memory (and produces output that needs more memory |
| 182 |
to decompress). With preset ``9`` for example, the overhead for an |
| 183 |
:class:`LZMACompressor` object can be as high as 800 MiB. For this reason, |
| 184 |
it is generally best to stick with the default preset. |
| 185 |
|
| 186 |
The *filters* argument (if provided) should be a filter chain specifier. |
| 187 |
See :ref:`filter-chain-specs` for details. |
| 188 |
|
| 189 |
.. method:: compress(data) |
| 190 |
|
| 191 |
Compress *data* (a :class:`bytes` object), returning a :class:`bytes` |
| 192 |
object containing compressed data for at least part of the input. Some of |
| 193 |
*data* may be buffered internally, for use in later calls to |
| 194 |
:meth:`compress` and :meth:`flush`. The returned data should be |
| 195 |
concatenated with the output of any previous calls to :meth:`compress`. |
| 196 |
|
| 197 |
.. method:: flush() |
| 198 |
|
| 199 |
Finish the compression process, returning a :class:`bytes` object |
| 200 |
containing any data stored in the compressor's internal buffers. |
| 201 |
|
| 202 |
The compressor cannot be used after this method has been called. |
| 203 |
|
| 204 |
|
| 205 |
.. class:: LZMADecompressor(format=FORMAT_AUTO, memlimit=None, filters=None) |
| 206 |
|
| 207 |
Create a decompressor object, which can be used to decompress data |
| 208 |
incrementally. |
| 209 |
|
| 210 |
For a more convenient way of decompressing an entire compressed stream at |
| 211 |
once, see :func:`decompress`. |
| 212 |
|
| 213 |
The *format* argument specifies the container format that should be used. The |
| 214 |
default is :const:`FORMAT_AUTO`, which can decompress both ``.xz`` and |
| 215 |
``.lzma`` files. Other possible values are :const:`FORMAT_XZ`, |
| 216 |
:const:`FORMAT_ALONE`, and :const:`FORMAT_RAW`. |
| 217 |
|
| 218 |
The *memlimit* argument specifies a limit (in bytes) on the amount of memory |
| 219 |
that the decompressor can use. When this argument is used, decompression will |
| 220 |
fail with an :class:`LZMAError` if it is not possible to decompress the input |
| 221 |
within the given memory limit. |
| 222 |
|
| 223 |
The *filters* argument specifies the filter chain that was used to create |
| 224 |
the stream being decompressed. This argument is required if *format* is |
| 225 |
:const:`FORMAT_RAW`, but should not be used for other formats. |
| 226 |
See :ref:`filter-chain-specs` for more information about filter chains. |
| 227 |
|
| 228 |
.. note:: |
| 229 |
This class does not transparently handle inputs containing multiple |
| 230 |
compressed streams, unlike :func:`decompress` and :class:`LZMAFile`. To |
| 231 |
decompress a multi-stream input with :class:`LZMADecompressor`, you must |
| 232 |
create a new decompressor for each stream. |
| 233 |
|
| 234 |
.. method:: decompress(data, max_length=-1) |
| 235 |
|
| 236 |
Decompress *data* (a :term:`bytes-like object`), returning |
| 237 |
uncompressed data as bytes. Some of *data* may be buffered |
| 238 |
internally, for use in later calls to :meth:`decompress`. The |
| 239 |
returned data should be concatenated with the output of any |
| 240 |
previous calls to :meth:`decompress`. |
| 241 |
|
| 242 |
If *max_length* is nonnegative, returns at most *max_length* |
| 243 |
bytes of decompressed data. If this limit is reached and further |
| 244 |
output can be produced, the :attr:`~.needs_input` attribute will |
| 245 |
be set to ``False``. In this case, the next call to |
| 246 |
:meth:`~.decompress` may provide *data* as ``b''`` to obtain |
| 247 |
more of the output. |
| 248 |
|
| 249 |
If all of the input data was decompressed and returned (either |
| 250 |
because this was less than *max_length* bytes, or because |
| 251 |
*max_length* was negative), the :attr:`~.needs_input` attribute |
| 252 |
will be set to ``True``. |
| 253 |
|
| 254 |
Attempting to decompress data after the end of stream is reached |
| 255 |
raises an :exc:`EOFError`. Any data found after the end of the |
| 256 |
stream is ignored and saved in the :attr:`~.unused_data` attribute. |
| 257 |
|
| 258 |
.. versionchanged:: 3.5 |
| 259 |
Added the *max_length* parameter. |
| 260 |
|
| 261 |
.. attribute:: check |
| 262 |
|
| 263 |
The ID of the integrity check used by the input stream. This may be |
| 264 |
:const:`CHECK_UNKNOWN` until enough of the input has been decoded to |
| 265 |
determine what integrity check it uses. |
| 266 |
|
| 267 |
.. attribute:: eof |
| 268 |
|
| 269 |
``True`` if the end-of-stream marker has been reached. |
| 270 |
|
| 271 |
.. attribute:: unused_data |
| 272 |
|
| 273 |
Data found after the end of the compressed stream. |
| 274 |
|
| 275 |
Before the end of the stream is reached, this will be ``b""``. |
| 276 |
|
| 277 |
.. attribute:: needs_input |
| 278 |
|
| 279 |
``False`` if the :meth:`.decompress` method can provide more |
| 280 |
decompressed data before requiring new uncompressed input. |
| 281 |
|
| 282 |
.. versionadded:: 3.5 |
| 283 |
|
| 284 |
.. function:: compress(data, format=FORMAT_XZ, check=-1, preset=None, filters=None) |
| 285 |
|
| 286 |
Compress *data* (a :class:`bytes` object), returning the compressed data as a |
| 287 |
:class:`bytes` object. |
| 288 |
|
| 289 |
See :class:`LZMACompressor` above for a description of the *format*, *check*, |
| 290 |
*preset* and *filters* arguments. |
| 291 |
|
| 292 |
|
| 293 |
.. function:: decompress(data, format=FORMAT_AUTO, memlimit=None, filters=None) |
| 294 |
|
| 295 |
Decompress *data* (a :class:`bytes` object), returning the uncompressed data |
| 296 |
as a :class:`bytes` object. |
| 297 |
|
| 298 |
If *data* is the concatenation of multiple distinct compressed streams, |
| 299 |
decompress all of these streams, and return the concatenation of the results. |
| 300 |
|
| 301 |
See :class:`LZMADecompressor` above for a description of the *format*, |
| 302 |
*memlimit* and *filters* arguments. |
| 303 |
|
| 304 |
|
| 305 |
Miscellaneous |
| 306 |
------------- |
| 307 |
|
| 308 |
.. function:: is_check_supported(check) |
| 309 |
|
| 310 |
Return ``True`` if the given integrity check is supported on this system. |
| 311 |
|
| 312 |
:const:`CHECK_NONE` and :const:`CHECK_CRC32` are always supported. |
| 313 |
:const:`CHECK_CRC64` and :const:`CHECK_SHA256` may be unavailable if you are |
| 314 |
using a version of :program:`liblzma` that was compiled with a limited |
| 315 |
feature set. |
| 316 |
|
| 317 |
|
| 318 |
.. _filter-chain-specs: |
| 319 |
|
| 320 |
Specifying custom filter chains |
| 321 |
------------------------------- |
| 322 |
|
| 323 |
A filter chain specifier is a sequence of dictionaries, where each dictionary |
| 324 |
contains the ID and options for a single filter. Each dictionary must contain |
| 325 |
the key ``"id"``, and may contain additional keys to specify filter-dependent |
| 326 |
options. Valid filter IDs are as follows: |
| 327 |
|
| 328 |
* Compression filters: |
| 329 |
|
| 330 |
* :const:`FILTER_LZMA1` (for use with :const:`FORMAT_ALONE`) |
| 331 |
* :const:`FILTER_LZMA2` (for use with :const:`FORMAT_XZ` and :const:`FORMAT_RAW`) |
| 332 |
|
| 333 |
* Delta filter: |
| 334 |
|
| 335 |
* :const:`FILTER_DELTA` |
| 336 |
|
| 337 |
* Branch-Call-Jump (BCJ) filters: |
| 338 |
|
| 339 |
* :const:`!FILTER_X86` |
| 340 |
* :const:`!FILTER_IA64` |
| 341 |
* :const:`!FILTER_ARM` |
| 342 |
* :const:`!FILTER_ARMTHUMB` |
| 343 |
* :const:`!FILTER_POWERPC` |
| 344 |
* :const:`!FILTER_SPARC` |
| 345 |
|
| 346 |
A filter chain can consist of up to 4 filters, and cannot be empty. The last |
| 347 |
filter in the chain must be a compression filter, and any other filters must be |
| 348 |
delta or BCJ filters. |
| 349 |
|
| 350 |
Compression filters support the following options (specified as additional |
| 351 |
entries in the dictionary representing the filter): |
| 352 |
|
| 353 |
* ``preset``: A compression preset to use as a source of default values for |
| 354 |
options that are not specified explicitly. |
| 355 |
* ``dict_size``: Dictionary size in bytes. This should be between 4 KiB and |
| 356 |
1.5 GiB (inclusive). |
| 357 |
* ``lc``: Number of literal context bits. |
| 358 |
* ``lp``: Number of literal position bits. The sum ``lc + lp`` must be at |
| 359 |
most 4. |
| 360 |
* ``pb``: Number of position bits; must be at most 4. |
| 361 |
* ``mode``: :const:`MODE_FAST` or :const:`MODE_NORMAL`. |
| 362 |
* ``nice_len``: What should be considered a "nice length" for a match. |
| 363 |
This should be 273 or less. |
| 364 |
* ``mf``: What match finder to use -- :const:`MF_HC3`, :const:`MF_HC4`, |
| 365 |
:const:`MF_BT2`, :const:`MF_BT3`, or :const:`MF_BT4`. |
| 366 |
* ``depth``: Maximum search depth used by match finder. 0 (default) means to |
| 367 |
select automatically based on other filter options. |
| 368 |
|
| 369 |
The delta filter stores the differences between bytes, producing more repetitive |
| 370 |
input for the compressor in certain circumstances. It supports one option, |
| 371 |
``dist``. This indicates the distance between bytes to be subtracted. The |
| 372 |
default is 1, i.e. take the differences between adjacent bytes. |
| 373 |
|
| 374 |
The BCJ filters are intended to be applied to machine code. They convert |
| 375 |
relative branches, calls and jumps in the code to use absolute addressing, with |
| 376 |
the aim of increasing the redundancy that can be exploited by the compressor. |
| 377 |
These filters support one option, ``start_offset``. This specifies the address |
| 378 |
that should be mapped to the beginning of the input data. The default is 0. |
| 379 |
|
| 380 |
|
| 381 |
Constants |
| 382 |
--------- |
| 383 |
|
| 384 |
The following module-level constants are provided for use as the *format*, |
| 385 |
*check*, *preset* and *filters* arguments of the classes and functions above. |
| 386 |
|
| 387 |
Container formats: |
| 388 |
|
| 389 |
.. data:: FORMAT_XZ |
| 390 |
|
| 391 |
The ``.xz`` container format. |
| 392 |
|
| 393 |
.. data:: FORMAT_ALONE |
| 394 |
|
| 395 |
The legacy ``.lzma`` container format. This format is more limited than |
| 396 |
``.xz`` -- it does not support integrity checks or multiple filters. |
| 397 |
|
| 398 |
.. data:: FORMAT_RAW |
| 399 |
|
| 400 |
A raw data stream, not using any container format. This format specifier |
| 401 |
does not support integrity checks, and requires that you always specify a |
| 402 |
custom filter chain (for both compression and decompression). Additionally, |
| 403 |
data compressed in this manner cannot be decompressed using |
| 404 |
:const:`FORMAT_AUTO`. |
| 405 |
|
| 406 |
.. data:: FORMAT_AUTO |
| 407 |
|
| 408 |
Used for decompression only. The container format is detected |
| 409 |
automatically, so that both ``.xz`` and ``.lzma`` files can be decompressed. |
| 410 |
|
| 411 |
Integrity checks: |
| 412 |
|
| 413 |
.. data:: CHECK_NONE |
| 414 |
|
| 415 |
No integrity check. This is the default (and the only acceptable value) for |
| 416 |
:const:`FORMAT_ALONE` and :const:`FORMAT_RAW`. |
| 417 |
|
| 418 |
.. data:: CHECK_CRC32 |
| 419 |
|
| 420 |
A 32-bit Cyclic Redundancy Check. |
| 421 |
|
| 422 |
.. data:: CHECK_CRC64 |
| 423 |
|
| 424 |
A 64-bit Cyclic Redundancy Check. This is the default for |
| 425 |
:const:`FORMAT_XZ`. |
| 426 |
|
| 427 |
.. data:: CHECK_SHA256 |
| 428 |
|
| 429 |
A 256-bit Secure Hash Algorithm. |
| 430 |
|
| 431 |
.. data:: CHECK_UNKNOWN |
| 432 |
|
| 433 |
The integrity check used by a stream could not yet be determined. This may |
| 434 |
be the value of the :attr:`LZMADecompressor.check` attribute until enough of |
| 435 |
the input has been decoded. |
| 436 |
|
| 437 |
.. data:: CHECK_ID_MAX |
| 438 |
|
| 439 |
The largest supported integrity-check ID. |
| 440 |
|
| 441 |
Compression presets: |
| 442 |
|
| 443 |
.. data:: PRESET_DEFAULT |
| 444 |
|
| 445 |
The default compression preset, equivalent to preset level ``6``. |
| 446 |
|
| 447 |
.. data:: PRESET_EXTREME |
| 448 |
|
| 449 |
A flag that may be bitwise OR-ed with a preset level (``0`` to ``9``) to |
| 450 |
select a slower but more thorough variant of that preset. |
| 451 |
|
| 452 |
Filter IDs and options: |
| 453 |
|
| 454 |
.. data:: FILTER_LZMA1 |
| 455 |
FILTER_LZMA2 |
| 456 |
|
| 457 |
The LZMA1 and LZMA2 compression filters. :const:`FILTER_LZMA1` is for use |
| 458 |
with :const:`FORMAT_ALONE`, while :const:`FILTER_LZMA2` is for use with |
| 459 |
:const:`FORMAT_XZ` and :const:`FORMAT_RAW`. |
| 460 |
|
| 461 |
.. data:: FILTER_DELTA |
| 462 |
|
| 463 |
The delta filter. |
| 464 |
|
| 465 |
.. data:: MODE_FAST |
| 466 |
MODE_NORMAL |
| 467 |
|
| 468 |
Compression modes that may be used as the ``mode`` option of a filter |
| 469 |
specifier (see :ref:`filter-chain-specs`). |
| 470 |
|
| 471 |
.. data:: MF_HC3 |
| 472 |
MF_HC4 |
| 473 |
MF_BT2 |
| 474 |
MF_BT3 |
| 475 |
MF_BT4 |
| 476 |
|
| 477 |
Match finders that may be used as the ``mf`` option of a filter specifier |
| 478 |
(see :ref:`filter-chain-specs`). |
| 479 |
|
| 480 |
|
| 481 |
Examples |
| 482 |
-------- |
| 483 |
|
| 484 |
Reading in a compressed file:: |
| 485 |
|
| 486 |
import lzma |
| 487 |
with lzma.open("file.xz") as f: |
| 488 |
file_content = f.read() |
| 489 |
|
| 490 |
Creating a compressed file:: |
| 491 |
|
| 492 |
import lzma |
| 493 |
data = b"Insert Data Here" |
| 494 |
with lzma.open("file.xz", "w") as f: |
| 495 |
f.write(data) |
| 496 |
|
| 497 |
Compressing data in memory:: |
| 498 |
|
| 499 |
import lzma |
| 500 |
data_in = b"Insert Data Here" |
| 501 |
data_out = lzma.compress(data_in) |
| 502 |
|
| 503 |
Incremental compression:: |
| 504 |
|
| 505 |
import lzma |
| 506 |
lzc = lzma.LZMACompressor() |
| 507 |
out1 = lzc.compress(b"Some data\n") |
| 508 |
out2 = lzc.compress(b"Another piece of data\n") |
| 509 |
out3 = lzc.compress(b"Even more data\n") |
| 510 |
out4 = lzc.flush() |
| 511 |
# Concatenate all the partial results: |
| 512 |
result = b"".join([out1, out2, out3, out4]) |
| 513 |
|
| 514 |
Writing compressed data to an already-open file:: |
| 515 |
|
| 516 |
import lzma |
| 517 |
with open("file.xz", "wb") as f: |
| 518 |
f.write(b"This data will not be compressed\n") |
| 519 |
with lzma.open(f, "w") as lzf: |
| 520 |
lzf.write(b"This *will* be compressed\n") |
| 521 |
f.write(b"Not compressed\n") |
| 522 |
|
| 523 |
Creating a compressed file using a custom filter chain:: |
| 524 |
|
| 525 |
import lzma |
| 526 |
my_filters = [ |
| 527 |
{"id": lzma.FILTER_DELTA, "dist": 5}, |
| 528 |
{"id": lzma.FILTER_LZMA2, "preset": 7 | lzma.PRESET_EXTREME}, |
| 529 |
] |
| 530 |
with lzma.open("file.xz", "w", filters=my_filters) as f: |
| 531 |
f.write(b"blah blah blah") |