| 1 |
import pytest |
| 2 |
|
| 3 |
from serial import Serial |
| 4 |
from time import time |
| 5 |
from pymeasure.adapters import SerialAdapter |
| 6 |
|
| 7 |
|
| 8 |
class TestSerialLoopback: |
| 9 |
"""Test serial adapter with two real but looped COM ports. |
| 10 |
|
| 11 |
A pair of COM ports that are looped will read the written data from the other. |
| 12 |
This looping needs to be done outside this script. One suggestion is using the application |
| 13 |
`com0com <https://com0com.sourceforge.net/>`_. |
| 14 |
Alternatively two UART adapters could be used, that have their RX/TX physically connected. |
| 15 |
|
| 16 |
Call PyTest with the argument``--device-address="COM1,COM2"`` to specify the serial addresses, |
| 17 |
minding the comma for the separation of the two ports. |
| 18 |
""" |
| 19 |
|
| 20 |
ADAPTER_TIMEOUT = 1.0 # Seconds |
| 21 |
|
| 22 |
@pytest.fixture() |
| 23 |
def adapter(self, connected_device_address): |
| 24 |
device = connected_device_address.split(",")[0] |
| 25 |
return SerialAdapter( |
| 26 |
device, |
| 27 |
baudrate=19200, |
| 28 |
timeout=self.ADAPTER_TIMEOUT, |
| 29 |
read_termination=chr(0x0F), |
| 30 |
) |
| 31 |
|
| 32 |
@pytest.fixture() |
| 33 |
def loopback(self, connected_device_address): |
| 34 |
"""See `adapter()`.""" |
| 35 |
device = connected_device_address.split(",")[1] |
| 36 |
return Serial(device, baudrate=19200) |
| 37 |
|
| 38 |
def test_read(self, adapter, loopback): |
| 39 |
"""Regular read with fixed number of bytes.""" |
| 40 |
loopback.write(b"abc") |
| 41 |
result = adapter.read_bytes(3) |
| 42 |
|
| 43 |
assert len(result) == 3 |
| 44 |
|
| 45 |
@pytest.mark.parametrize("data", [ |
| 46 |
b"a", # Short data |
| 47 |
b"aaaaabbbbbccccceeeee" * 50, # A lot data |
| 48 |
b"a" * 256, # Exactly one chunk size |
| 49 |
b"aaaaabbbbb\nccccceeeee" * 50, # With a newline (should be ignored) |
| 50 |
]) |
| 51 |
def test_read_all(self, adapter, loopback, data): |
| 52 |
"""Read with undefined number of bytes - also confirm timeout duration is correct.""" |
| 53 |
loopback.write(data) |
| 54 |
start = time() |
| 55 |
result = adapter.read_bytes(-1) |
| 56 |
elapsed = time() - start |
| 57 |
|
| 58 |
assert result == data |
| 59 |
assert self.ADAPTER_TIMEOUT == pytest.approx(elapsed, abs=0.1) |
| 60 |
|
| 61 |
@pytest.mark.parametrize("chunk", [1, 256, 10000]) |
| 62 |
def test_read_varied_chunk_size(self, adapter, loopback, chunk): |
| 63 |
"""Read with undefined number of bytes with non-default chunk size.""" |
| 64 |
data = b"abcde" * 10 |
| 65 |
loopback.write(data) |
| 66 |
result = adapter.read_bytes(-1) |
| 67 |
|
| 68 |
assert result == data |