Debian Codegraph @

pymeasure/instruments/temptronic/temptronic_eco560.py

raw
1 #
2 # This file is part of the PyMeasure package.
3 #
4 # Copyright (c) 2013-2024 PyMeasure Developers
5 #
6 # Permission is hereby granted, free of charge, to any person obtaining a copy
7 # of this software and associated documentation files (the "Software"), to deal
8 # in the Software without restriction, including without limitation the rights
9 # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 # copies of the Software, and to permit persons to whom the Software is
11 # furnished to do so, subject to the following conditions:
12 #
13 # The above copyright notice and this permission notice shall be included in
14 # all copies or substantial portions of the Software.
15 #
16 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
19 # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 # THE SOFTWARE.
23 #
24
25 """
26 Implementation of an interface class for ThermoStream® Systems devices.
27 Reference Document for implementation:
28 ECO-560/660 ThermoStream® Systems
29 Operators Manual
30 Revision B
31 September, 2018
32 """
33
34 from pymeasure.instruments.temptronic.temptronic_base import ATSBase
35 from enum import IntFlag
36
37
38 class ECO560ErrorCode(IntFlag):
39 """Error code enums based on ``IntFlag``.
40
41 Used in conjunction with :attr:`~.error_code`.
42
43 ====== ======
44 Value Enum
45 ====== ======
46 16384 NO_DUT_SENSOR_SELECTED
47 8192 IMPROPER_SOFTWARE_VERSION
48 1024 PURGE_HEAT_FAILURE
49 512 FLOW_SENSOR_HARDWARE_ERROR
50 256 DUT_OPEN_LOOP
51 128 INTERNAL_ERROR
52 64 OPEN_PURGE_TEMPERATURE_SENSOR
53 32 AIR_SENSOR_OPEN
54 16 LOW_INPUT_AIR_PRESSURE
55 8 LOW_FLOW
56 4 SETPOINT_OUT_OF_RANGE
57 2 AIR_OPEN_LOOP
58 1 OVERHEAT
59 0 OK
60 ====== ======
61
62 """
63 # bit 15 - reserved
64 NO_DUT_SENSOR_SELECTED = 16384 # bit 14 – no DUT sensor selected
65 IMPROPER_SOFTWARE_VERSION = 8192 # bit 13 – software revision error
66 # bit 12 – reserved
67 # bit 11 – reserved
68 PURGE_HEAT_FAILURE = 1024 # bit 10 – purge heat failure
69 FLOW_SENSOR_HARDWARE_ERROR = 512 # bit 9 – flow sensor hardware error
70 DUT_OPEN_LOOP = 256 # bit 8 – dut open loop
71 INTERNAL_ERROR = 128 # bit 7 – internal error
72 OPEN_PURGE_TEMPERATURE_SENSOR = 64 # bit 6 – open purge temperature sensor
73 NO_PURGE_FLOW = 32 # bit 5 – no purge flow
74 LOW_INPUT_AIR_PRESSURE = 16 # bit 4 – low input air pressure
75 LOW_FLOW = 8 # bit 3 – low flow
76 SETPOINT_OUT_OF_RANGE = 4 # bit 2 – setpoint out of range
77 AIR_OPEN_LOOP = 2 # bit 1 – air open loop
78 OVERHEAT = 1 # bit 0 – overheat
79 OK = 0 # ok state
80
81
82 class ECO560(ATSBase):
83 """Represent the TemptronicECO560 instruments.
84 """
85
86 temperature_limit_air_low_values = [-150, 25]
87
88 error_code_get_process = lambda v: ECO560ErrorCode(int(v)) # noqa: E731
89
90 copy_active_setup_file = None
91 # Not Implemented in ECO-560
92
93 def __init__(self, adapter, name="Temptronic ECO-560 Thermostream", **kwargs):
94 kwargs.setdefault('timeout', 3000)
95 super().__init__(
96 adapter,
97 name,
98 tcpip={'write_termination': '\n',
99 'read_termination': '\n'},
100 **kwargs
101 )