| 1 |
# |
| 2 |
# This file is part of the PyMeasure package. |
| 3 |
# |
| 4 |
# Copyright (c) 2013-2024 PyMeasure Developers |
| 5 |
# |
| 6 |
# Permission is hereby granted, free of charge, to any person obtaining a copy |
| 7 |
# of this software and associated documentation files (the "Software"), to deal |
| 8 |
# in the Software without restriction, including without limitation the rights |
| 9 |
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| 10 |
# copies of the Software, and to permit persons to whom the Software is |
| 11 |
# furnished to do so, subject to the following conditions: |
| 12 |
# |
| 13 |
# The above copyright notice and this permission notice shall be included in |
| 14 |
# all copies or substantial portions of the Software. |
| 15 |
# |
| 16 |
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| 17 |
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| 18 |
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| 19 |
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| 20 |
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| 21 |
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| 22 |
# THE SOFTWARE. |
| 23 |
# |
| 24 |
|
| 25 |
"""This module implements an interface for Active Technologies AWG-401x, both |
| 26 |
for the Arbitrary Waveform Generator (AWG) mode and the Arbitrary Function |
| 27 |
Generator (AFG) mode. The module has been developed from the official |
| 28 |
documentation available on https://www.activetechnologies.it""" |
| 29 |
|
| 30 |
from collections import abc, namedtuple |
| 31 |
|
| 32 |
import pprint |
| 33 |
|
| 34 |
from pymeasure.instruments import Instrument, Channel, SCPIUnknownMixin |
| 35 |
from pymeasure.instruments.validators import strict_discrete_set, \ |
| 36 |
strict_range |
| 37 |
|
| 38 |
|
| 39 |
class ChannelBase(Channel): |
| 40 |
"""Implementation of a base Active Technologies AWG-4000 channel.""" |
| 41 |
|
| 42 |
def __init__(self, instrument, id): |
| 43 |
super().__init__(instrument, id) |
| 44 |
|
| 45 |
self.delay_values = [self.delay_min, self.delay_max] |
| 46 |
|
| 47 |
enabled = Instrument.control( |
| 48 |
"OUTPut{ch}:STATe?", "OUTPut{ch}:STATe %d", |
| 49 |
"""A boolean property that enables or disables the output for the |
| 50 |
specified channel.""", |
| 51 |
validator=strict_discrete_set, |
| 52 |
values={True: 1, False: 0}, |
| 53 |
map_values=True |
| 54 |
) |
| 55 |
|
| 56 |
polarity = Instrument.control( |
| 57 |
"OUTPut{ch}:POLarity?", "OUTPut{ch}:POLarity %s", |
| 58 |
"""This property inverts the output waveform relative to its average |
| 59 |
value: (High Level – Low Level)/2. NORM for normal, INV for inverted |
| 60 |
""", |
| 61 |
validator=strict_discrete_set, |
| 62 |
values=["NORMAL", "NORM", "INVERTED", "INV"], |
| 63 |
get_process=lambda v: "NORM" if v == 0 else ("INV" if v == 1 else v) |
| 64 |
) |
| 65 |
|
| 66 |
delay = Instrument.control( |
| 67 |
None, None, |
| 68 |
"""This property sets or queries the initial delay, set 0 for disable |
| 69 |
it. When you send this command in AFG mode, if the instrument is |
| 70 |
running, it will be stopped.""", |
| 71 |
dynamic=True |
| 72 |
) |
| 73 |
|
| 74 |
delay_max = Instrument.measurement( |
| 75 |
None, |
| 76 |
"""This property queries the maximum delay that can be set to the |
| 77 |
output waveform.""", |
| 78 |
dynamic=True |
| 79 |
) |
| 80 |
|
| 81 |
delay_min = Instrument.measurement( |
| 82 |
None, |
| 83 |
"""This property queries the minimum delay that can be set to the |
| 84 |
output waveform.""", |
| 85 |
dynamic=True |
| 86 |
) |
| 87 |
|
| 88 |
|
| 89 |
class ChannelAFG(ChannelBase): |
| 90 |
"""Implementation of a Active Technologies AWG-4000 channel in AFG mode.""" |
| 91 |
|
| 92 |
def __init__(self, instrument, id): |
| 93 |
super().__init__(instrument, id) |
| 94 |
|
| 95 |
self.calculate_voltage_range() |
| 96 |
self.frequency_values = [self.frequency_min, self.frequency_max] |
| 97 |
|
| 98 |
self.phase_values = [self.phase_min, self.phase_max] |
| 99 |
|
| 100 |
load_impedance = Instrument.control( |
| 101 |
"OUTPut{ch}:IMPedance?", "OUTPut{ch}:IMPedance %d", |
| 102 |
"""This property sets the output load impedance for the specified |
| 103 |
channel. The specified value is used for amplitude, offset, and |
| 104 |
high/low level settings. You can set the impedance to any value from |
| 105 |
1 Ω to 1 MΩ. The default value is 50 Ω.""", |
| 106 |
validator=strict_range, |
| 107 |
values=[1, 1000000] |
| 108 |
) |
| 109 |
|
| 110 |
output_impedance = Instrument.control( |
| 111 |
"OUTPut{ch}:LOW:IMPedance?", "OUTPut{ch}:LOW:IMPedance %d", |
| 112 |
"""This property sets the instrument output impedance, the possible |
| 113 |
values are: 5 Ohm or 50 Ohm (default).""", |
| 114 |
validator=strict_discrete_set, |
| 115 |
values={5: 1, 50: 0}, |
| 116 |
map_values=True |
| 117 |
) |
| 118 |
|
| 119 |
shape = Instrument.control( |
| 120 |
"SOURce{ch}:FUNCtion:SHAPe?", "SOURce{ch}:FUNCtion:SHAPe %s", |
| 121 |
"""This property sets or queries the shape of the carrier waveform. |
| 122 |
Allowed choices depends on the choosen modality, please refer on |
| 123 |
instrument manual. When you set this property with a different value, |
| 124 |
if the instrument is running it will be stopped. |
| 125 |
Can be set to: SIN<USOID>, SQU<ARE>, PULS<E>, RAMP, PRN<OISE>, DC, |
| 126 |
SINC, GAUS<SIAN>, LOR<ENTZ>, ERIS<E>, EDEC<AY>, HAV<ERSINE>, ARBB, |
| 127 |
EFIL<E>, DOUBLEPUL<SE>""", |
| 128 |
validator=strict_discrete_set, |
| 129 |
values=["SINUSOID", "SIN", "SQUARE", "SQU", "PULSE", "PULS", "RAMP", |
| 130 |
"PRNOISE", "PRN", "DC", "SINC", "GAUSSIAN", "GAUS", "LORENTZ", |
| 131 |
"LOR", "ERISE", "ERIS", "EDECAY", "EDEC", "HAVERSINE", "HAV", |
| 132 |
"ARBB", "EFILE", "EFIL", "DOUBLEPULSE", "DOUBLEPUL"] |
| 133 |
) |
| 134 |
|
| 135 |
# Default delay override |
| 136 |
delay_get_command = "SOURce{ch}:INITDELay?" |
| 137 |
delay_set_command = "SOURce{ch}:INITDELay %s" |
| 138 |
delay_max_get_command = "SOURce{ch}:INITDELay? MAXimum" |
| 139 |
delay_min_get_command = "SOURce{ch}:INITDELay? MINimum" |
| 140 |
|
| 141 |
frequency = Instrument.control( |
| 142 |
"SOURce{ch}:FREQuency?", "SOURce{ch}:FREQuency %s", |
| 143 |
"""This property sets or queries the frequency of the output waveform. |
| 144 |
This command is available when the Run Mode is set to any setting other |
| 145 |
than Sweep. The output frequency range setting depends on the type of |
| 146 |
output waveform. If you change the type of output waveform, it may |
| 147 |
change the output frequency because changing waveform types affects the |
| 148 |
setting range of the output frequency. The output frequency range |
| 149 |
setting depends also on the amplitude parameter.""", |
| 150 |
validator=strict_range, |
| 151 |
dynamic=True |
| 152 |
) |
| 153 |
|
| 154 |
frequency_max = Instrument.measurement( |
| 155 |
"SOURce{ch}:FREQuency? MAXimum", |
| 156 |
"""This property queries the maximum frequency that can be set to the |
| 157 |
output waveform.""" |
| 158 |
) |
| 159 |
|
| 160 |
frequency_min = Instrument.measurement( |
| 161 |
"SOURce{ch}:FREQuency? MINimum", |
| 162 |
"""This property queries the minimum frequency that can be set to the |
| 163 |
output waveform.""" |
| 164 |
) |
| 165 |
|
| 166 |
phase = Instrument.control( |
| 167 |
"SOURce{ch}:PHASe:ADJust?", "SOURce{ch}:PHASe:ADJust %s", |
| 168 |
"""This property sets or queries the phase of the output waveform for |
| 169 |
the specified channel. The value is in degrees.""", |
| 170 |
validator=strict_range, |
| 171 |
dynamic=True |
| 172 |
) |
| 173 |
|
| 174 |
phase_max = Instrument.measurement( |
| 175 |
"SOURce{ch}:PHASe:ADJust? MAXimum", |
| 176 |
"""This property queries the maximum phase that can be set to the |
| 177 |
output waveform.""" |
| 178 |
) |
| 179 |
|
| 180 |
phase_min = Instrument.measurement( |
| 181 |
"SOURce{ch}:PHASe:ADJust? MINimum", |
| 182 |
"""This property queries the minimum phase that can be set to the |
| 183 |
output waveform.""" |
| 184 |
) |
| 185 |
|
| 186 |
voltage_unit = Instrument.control( |
| 187 |
"OUTPut{ch}:VOLTage:UNIT?", "OUTPut{ch}:VOLTage:UNIT %s", |
| 188 |
"""This property sets or queries the units of output amplitude, the |
| 189 |
possible choices are: VPP, VRMS, DBM. This command does not affect the |
| 190 |
offset, high level, or low level of output.""", |
| 191 |
validator=strict_discrete_set, |
| 192 |
values=["VPP", "VRMS", "DBM"] |
| 193 |
) |
| 194 |
|
| 195 |
voltage_low = Instrument.control( |
| 196 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:LOW?", |
| 197 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:LOW %s", |
| 198 |
"""This property sets or queries the low level of the waveform. The |
| 199 |
low level could be limited by noise level to not exceed the maximum |
| 200 |
amplitude. If the carrier is Noise or DC level, this command and this |
| 201 |
query cause an error.""", |
| 202 |
validator=strict_range, |
| 203 |
dynamic=True |
| 204 |
) |
| 205 |
|
| 206 |
voltage_low_max = Instrument.measurement( |
| 207 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:LOW? MAXimum", |
| 208 |
"""This property queries the maximum low voltage level that can be set |
| 209 |
to the output waveform.""" |
| 210 |
) |
| 211 |
|
| 212 |
voltage_low_min = Instrument.measurement( |
| 213 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:LOW? MINimum", |
| 214 |
"""This property queries the minimum low voltage level that can be set |
| 215 |
to the output waveform.""" |
| 216 |
) |
| 217 |
|
| 218 |
voltage_high = Instrument.control( |
| 219 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:HIGH?", |
| 220 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:HIGH %s", |
| 221 |
"""This property sets or queries the high level of the waveform. The |
| 222 |
high level could be limited by noise level to not exceed the maximum |
| 223 |
amplitude. If the carrier is Noise or DC level, this command and this |
| 224 |
query cause an error.""", |
| 225 |
validator=strict_range, |
| 226 |
dynamic=True |
| 227 |
) |
| 228 |
|
| 229 |
voltage_high_max = Instrument.measurement( |
| 230 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:HIGH? MAXimum", |
| 231 |
"""This property queries the maximum high voltage level that can be set |
| 232 |
to the output waveform.""" |
| 233 |
) |
| 234 |
|
| 235 |
voltage_high_min = Instrument.measurement( |
| 236 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:HIGH? MINimum", |
| 237 |
"""This property queries the minimum high voltage level that can be set |
| 238 |
to the output waveform.""" |
| 239 |
) |
| 240 |
|
| 241 |
voltage_amplitude = Instrument.control( |
| 242 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:AMPLitude?", |
| 243 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:AMPLitude %s", |
| 244 |
"""This property sets or queries the output amplitude for the specified |
| 245 |
channel. The measurement unit of amplitude depends on the selection |
| 246 |
operated using the voltage_unit property. If the carrier is Noise the |
| 247 |
amplitude is Vpk instead of Vpp. If the carrier is DC level this |
| 248 |
command causes an error. The range of the amplitude setting could be |
| 249 |
limited by the frequency and offset parameter of the carrier waveform. |
| 250 |
""", |
| 251 |
validator=strict_range, |
| 252 |
dynamic=True |
| 253 |
) |
| 254 |
|
| 255 |
voltage_amplitude_max = Instrument.measurement( |
| 256 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:AMPLitude? MAXimum", |
| 257 |
"""This property queries the maximum amplitude voltage level that can |
| 258 |
be set to the output waveform.""", |
| 259 |
get_process=lambda value: float(value.replace("VPP", "")) |
| 260 |
) |
| 261 |
|
| 262 |
voltage_amplitude_min = Instrument.measurement( |
| 263 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:AMPLitude? MINimum", |
| 264 |
"""This property queries the minimum amplitude voltage level that can |
| 265 |
be set to the output waveform.""", |
| 266 |
get_process=lambda value: float(value.replace("VPP", "")) |
| 267 |
) |
| 268 |
|
| 269 |
voltage_offset = Instrument.control( |
| 270 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:OFFSet?", |
| 271 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:OFFSet %s", |
| 272 |
"""This property sets or queries the offset level for the specified |
| 273 |
channel. The offset range setting depends on the amplitude parameter. |
| 274 |
""", |
| 275 |
validator=strict_range, |
| 276 |
dynamic=True |
| 277 |
) |
| 278 |
|
| 279 |
voltage_offset_max = Instrument.measurement( |
| 280 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:OFFSet? MAXimum", |
| 281 |
"""This property queries the maximum offset voltage level that can be |
| 282 |
set to the output waveform.""" |
| 283 |
) |
| 284 |
|
| 285 |
voltage_offset_min = Instrument.measurement( |
| 286 |
"SOURce{ch}:VOLTage:LEVel:IMMediate:OFFSet? MINimum", |
| 287 |
"""This property queries the minimum offset voltage level that can be |
| 288 |
set to the output waveform.""" |
| 289 |
) |
| 290 |
|
| 291 |
baseline_offset = Instrument.control( |
| 292 |
"SOURce{ch}:VOLTage:BASELINE:OFFSET?", |
| 293 |
"SOURce{ch}:VOLTage:BASELINE:OFFSET %s", |
| 294 |
"""This property sets or queries the offset level for the specified |
| 295 |
channel. The offset range setting depends on the amplitude parameter. |
| 296 |
""", |
| 297 |
validator=strict_range, |
| 298 |
dynamic=True |
| 299 |
) |
| 300 |
|
| 301 |
baseline_offset_max = Instrument.measurement( |
| 302 |
"SOURce{ch}:VOLTage:BASELINE:OFFSET? MAXimum", |
| 303 |
"""This property queries the maximum offset voltage level that can be |
| 304 |
set to the output waveform.""" |
| 305 |
) |
| 306 |
|
| 307 |
baseline_offset_min = Instrument.measurement( |
| 308 |
"SOURce{ch}:VOLTage:BASELINE:OFFSET? MINimum", |
| 309 |
"""This property queries the minimum offset voltage level that can be |
| 310 |
set to the output waveform.""" |
| 311 |
) |
| 312 |
|
| 313 |
def calculate_voltage_range(self): |
| 314 |
self.voltage_low_values = [self.voltage_low_min, self.voltage_low_max] |
| 315 |
|
| 316 |
self.voltage_high_values = [self.voltage_high_min, |
| 317 |
self.voltage_high_max] |
| 318 |
|
| 319 |
self.voltage_amplitude_values = [self.voltage_amplitude_min, |
| 320 |
self.voltage_amplitude_max] |
| 321 |
|
| 322 |
self.voltage_offset_values = [self.voltage_offset_min, |
| 323 |
self.voltage_offset_max] |
| 324 |
|
| 325 |
self.baseline_offset_values = [self.baseline_offset_min, |
| 326 |
self.baseline_offset_max] |
| 327 |
|
| 328 |
|
| 329 |
class ChannelAWG(ChannelBase): |
| 330 |
"""Implementation of a Active Technologies AWG-4000 channel in AWG mode.""" |
| 331 |
|
| 332 |
# Default delay override |
| 333 |
delay_get_command = "OUTPut{ch}:DELay?" |
| 334 |
delay_set_command = "OUTPut{ch}:DELay %s" |
| 335 |
delay_max_get_command = "OUTPut{ch}:DELay? MAXimum" |
| 336 |
delay_min_get_command = "OUTPut{ch}:DELay? MINimum" |
| 337 |
|
| 338 |
scale = Instrument.control( |
| 339 |
"OUTPut{ch}:SCALe?", |
| 340 |
"OUTPut{ch}:SCALe %f", |
| 341 |
"""This property sets or returns the Amplitude Scale parameter of the |
| 342 |
analog channel “n”. This property can be modified at run-time to adjust |
| 343 |
the waveform amplitude while the instrument is running and it is |
| 344 |
applied to all the waveforms contained in the sequencer. It is |
| 345 |
expressed in % and it has a range of 0% to 100%. 100% means that the |
| 346 |
waveform keeps its original amplitude.""", |
| 347 |
validator=strict_range, |
| 348 |
values=[0, 100] |
| 349 |
) |
| 350 |
|
| 351 |
|
| 352 |
class AWG401x_base(SCPIUnknownMixin, Instrument): |
| 353 |
"""AWG-401x base class""" |
| 354 |
|
| 355 |
def __init__(self, adapter, |
| 356 |
name="Active Technologies AWG-4014 1.2GS/s Arbitrary Waveform Generator", |
| 357 |
**kwargs): |
| 358 |
|
| 359 |
# Insert an higher timeout because, often, when starting the |
| 360 |
# instrument, can pass some time and the adapted goes in timeout |
| 361 |
kwargs.setdefault('timeout', 7500) |
| 362 |
|
| 363 |
super().__init__( |
| 364 |
adapter, |
| 365 |
name, |
| 366 |
**kwargs |
| 367 |
) |
| 368 |
|
| 369 |
def beep(self): |
| 370 |
"""Causes a system beep.""" |
| 371 |
self.write("SYST:BEEP") |
| 372 |
|
| 373 |
def save(self, position): |
| 374 |
"""Save the actual configuration in memory. |
| 375 |
|
| 376 |
:param int position: Instrument save position [0,4] |
| 377 |
|
| 378 |
:raises ValueError: If position is outside permitted limit [0,4]. |
| 379 |
""" |
| 380 |
|
| 381 |
if position >= 0 or position <= 4: |
| 382 |
self.write(f"*SAV {position}") |
| 383 |
else: |
| 384 |
raise ValueError("position value outside permitted range [0,4]") |
| 385 |
|
| 386 |
def load(self, position): |
| 387 |
"""Load the actual configuration in memory. |
| 388 |
|
| 389 |
:param int position: Instrument load position [0,4] |
| 390 |
|
| 391 |
:raises ValueError: If position is outside permitted limit [0,4]. |
| 392 |
""" |
| 393 |
|
| 394 |
if position >= 0 or position <= 4: |
| 395 |
self.write(f"*RCL {position}") |
| 396 |
else: |
| 397 |
raise ValueError("position value outside permitted range [0,4]") |
| 398 |
|
| 399 |
def wait_last(self): |
| 400 |
"""Wait for last operation completition""" |
| 401 |
|
| 402 |
self.write("*WAI") |
| 403 |
|
| 404 |
|
| 405 |
class AWG401x_AFG(AWG401x_base): |
| 406 |
"""Represents the Active Technologies AWG-401x Arbitrary Waveform Generator |
| 407 |
in AFG mode. |
| 408 |
|
| 409 |
.. code-block:: python |
| 410 |
|
| 411 |
wfg = AWG401x_AFG("TCPIP::192.168.0.123::INSTR") |
| 412 |
|
| 413 |
wfg.reset() # Reset the instrument at default state |
| 414 |
|
| 415 |
wfg.channels[1].shape = "SINUSOID" # Sets a sine waveform on CH1 |
| 416 |
wfg.channels[1].frequency = 4.7e3 # Sets the frequency to 4.7 kHz on CH1 |
| 417 |
wfg.channels[1].amplitude = 1 # Set amplitude of 1 V on CH1 |
| 418 |
wfg.channels[1].offset = 0 # Set the amplitude to 0 V on CH1 |
| 419 |
wfg.channels[1].enabled = True # Enables the CH1 |
| 420 |
|
| 421 |
wfg.channels[2].shape = "SQUARE" # Sets a square waveform on CH2 |
| 422 |
wfg.channels[2].frequency = 100e6 # Sets the frequency to 100 MHz on CH2 |
| 423 |
wfg.channels[2].amplitude = 0.5 # Set amplitude of 0.5 V on CH2 |
| 424 |
wfg.channels[2].offset = 0 # Set the amplitude to 0 V on CH2 |
| 425 |
wfg.channels[2].enabled = True # Enables the CH2 |
| 426 |
|
| 427 |
wfg.enabled = True # Enable output of waveform generator |
| 428 |
wfg.beep() # "beep" |
| 429 |
|
| 430 |
print(wfg.check_errors()) # Get the error queue |
| 431 |
|
| 432 |
""" |
| 433 |
ch_1 = Instrument.ChannelCreator(ChannelAFG, 1) |
| 434 |
ch_2 = Instrument.ChannelCreator(ChannelAFG, 2) |
| 435 |
|
| 436 |
enabled = Instrument.control( |
| 437 |
"AFGControl:STATus?", "AFGControl:%s", |
| 438 |
"""A boolean property that enables the generation of signals.""", |
| 439 |
validator=strict_discrete_set, |
| 440 |
values={True: "START", False: "STOP"}, |
| 441 |
map_values=True, |
| 442 |
get_process=lambda v: "START" if v == 1 else ("STOP" if v == 0 else v) |
| 443 |
) |
| 444 |
|
| 445 |
def __init__(self, adapter, **kwargs): |
| 446 |
super().__init__(adapter, **kwargs) |
| 447 |
|
| 448 |
model = self.id.split(",")[1] |
| 449 |
if model == "AWG4012": |
| 450 |
num_ch = 2 |
| 451 |
elif model == "AWG4014": |
| 452 |
num_ch = 4 |
| 453 |
elif model == "AWG4018": |
| 454 |
num_ch = 8 |
| 455 |
else: |
| 456 |
raise NotImplementedError(f"Instrument {model} not implemented in" |
| 457 |
"class AWG401x") |
| 458 |
|
| 459 |
for i in range(3, num_ch + 1): |
| 460 |
child = self.add_child(ChannelAFG, i) |
| 461 |
child._protected = True |
| 462 |
|
| 463 |
|
| 464 |
class AWG401x_AWG(AWG401x_base): |
| 465 |
"""Represents the Active Technologies AWG-401x Arbitrary Waveform Generator |
| 466 |
in AWG mode. |
| 467 |
|
| 468 |
.. code-block:: python |
| 469 |
|
| 470 |
wfg = AWG401x_AWG("TCPIP::192.168.0.123::INSTR") |
| 471 |
|
| 472 |
wfg.reset() # Reset the instrument at default state |
| 473 |
|
| 474 |
# Set a oscillating waveform |
| 475 |
wfg.waveforms["MyWaveform"] = [1, 0] * 8 |
| 476 |
|
| 477 |
for i in range(1, wfg.num_ch + 1): |
| 478 |
wfg.entries[1].channels[i].voltage_high = 1 # Sets high voltage = 1 |
| 479 |
wfg.entries[1].channels[i].voltage_low = 0 # Sets low voltage = 1 |
| 480 |
wfg.entries[1].channels[i].waveform = "SQUARE" # Sets a square wave |
| 481 |
wfg.setting_ch[i].enabled = True # Enable channel |
| 482 |
|
| 483 |
wfg.entries.resize(2) # Resize the number of entries to 2 |
| 484 |
|
| 485 |
wfg.entries[2].channels[1].waveform = "MyWaveform" # Set custom waveform |
| 486 |
|
| 487 |
wfg.enabled = True # Enable output of waveform generator |
| 488 |
wfg.beep() # "beep" |
| 489 |
|
| 490 |
print(wfg.check_errors()) # Get the error queue |
| 491 |
|
| 492 |
""" |
| 493 |
|
| 494 |
def __init__(self, adapter, **kwargs): |
| 495 |
super().__init__(adapter, **kwargs) |
| 496 |
|
| 497 |
for i in range(1, self.num_ch + 1): |
| 498 |
self.add_child(ChannelAWG, i, collection="setting_ch") |
| 499 |
|
| 500 |
self.entries = self.DummyEntriesElements(self, self.num_ch) |
| 501 |
self.burst_count_values = [self.burst_count_min, self.burst_count_max] |
| 502 |
|
| 503 |
self.sampling_rate_values = [self.sampling_rate_min, |
| 504 |
self.sampling_rate_max] |
| 505 |
|
| 506 |
self._waveforms = self.WaveformsLazyDict(self) |
| 507 |
|
| 508 |
num_ch = Instrument.measurement( |
| 509 |
"AWGControl:CONFigure:CNUMber?", |
| 510 |
"""This property queries the number of analog channels.""", |
| 511 |
cast=int |
| 512 |
) |
| 513 |
|
| 514 |
num_dch = Instrument.measurement( |
| 515 |
"AWGControl:CONFigure:DNUMber?", |
| 516 |
"""This property queries the number of digital channels.""", |
| 517 |
cast=int |
| 518 |
) |
| 519 |
|
| 520 |
sample_decreasing_strategy = Instrument.control( |
| 521 |
"AWGControl:DECreasing?", "AWGControl:DECreasing %s", |
| 522 |
"""This property sets or returns the Sample Decreasing Strategy. The |
| 523 |
“Sample decreasing strategy” parameter defines the strategy used to |
| 524 |
adapt the waveform length to the sequencer entry length in the case |
| 525 |
where the original waveform length is longer than the sequencer entry |
| 526 |
length. Can be set to: DECIM<ATION>, CUTT<AIL>, CUTH<EAD>""", |
| 527 |
validator=strict_discrete_set, |
| 528 |
values=["DECIMATION", "DECIM", "CUTTAIL", "CUTT", "CUTHEAD", "CUTH"] |
| 529 |
) |
| 530 |
|
| 531 |
sample_increasing_strategy = Instrument.control( |
| 532 |
"AWGControl:INCreasing?", "AWGControl:INCreasing %s", |
| 533 |
"""This property sets or or returns the Sample Increasing Strategy. The |
| 534 |
“Sample increasing strategy” parameter defines the strategy used to |
| 535 |
adapt the waveform length to the sequencer entry length in the case |
| 536 |
where the original waveform length is shorter than the sequencer entry |
| 537 |
length. Can be set to: INTER<POLATION>, RETURN<ZERO>, HOLD<LAST>, |
| 538 |
SAMPLESM<ULTIPLICATION>""", |
| 539 |
validator=strict_discrete_set, |
| 540 |
values=["INTERPOLATION", "INTER", "RETURNZERO", "RETURN", "HOLDLAST", |
| 541 |
"HOLD", "SAMPLESMULTIPLICATION", "SAMPLESM"] |
| 542 |
) |
| 543 |
|
| 544 |
entry_level_strategy = Instrument.control( |
| 545 |
"AWGControl:LENGth:MODE?", "AWGControl:LENGth:MODE %s", |
| 546 |
"""This property sets or or returns the Entry Length Strategy. This |
| 547 |
strategy manages the length of the sequencer entries in relationship |
| 548 |
with the length of the channel waveforms defined for each entry. The |
| 549 |
possible values are: |
| 550 |
|
| 551 |
* ADAPTL<ONGER>: the length of an entry of the sequencer by default |
| 552 |
will be equal to the length of the longer channel waveform, among all |
| 553 |
analog channels, assigned to the entry. |
| 554 |
* ADAPTS<HORTER>: the length of an entry of the sequencer by default |
| 555 |
will be equal to the length of the shorter channel waveform, among |
| 556 |
all analog channels, assigned to the entry. |
| 557 |
* DEF<AULT>:the length of an entry of the sequencer by default will be |
| 558 |
equal to the value specified in the Sequencer Item Default Length [N] |
| 559 |
parameter""", |
| 560 |
validator=strict_discrete_set, |
| 561 |
values=["ADAPTLONGER", "ADAPTL", "ADAPTSHORTER", "ADAPTS", "DEFAULT", |
| 562 |
"DEF"] |
| 563 |
) |
| 564 |
|
| 565 |
run_mode = Instrument.control( |
| 566 |
"AWGControl:RMODe?", "AWGControl:RMODe %s", |
| 567 |
"""This property sets or returns the AWG run mode. The possible values |
| 568 |
are: |
| 569 |
|
| 570 |
* CONT<INUOUS>: each waveform will loop as written in the entry |
| 571 |
repetition parameter and the entire sequence is repeated circularly |
| 572 |
* BURS<T>: the AWG waits for a trigger event. When the trigger event |
| 573 |
occurs each waveform will loop as written in the entry repetition |
| 574 |
parameter and the entire sequence will be repeated circularly many |
| 575 |
times as written in the Burst Count[N] parameter. If you set Burst |
| 576 |
Count[N]=1 the instrument is in Single mode and the sequence will be |
| 577 |
repeated only once. |
| 578 |
* TCON<TINUOUS>: the AWG waits for a trigger event. When the trigger |
| 579 |
event occurs each waveform will loop as written in the entry |
| 580 |
repetition parameter and the entire sequence will be repeated |
| 581 |
circularly. |
| 582 |
* STEP<PED>: the AWG, for each entry, waits for a trigger event before |
| 583 |
the execution of the sequencer entry. The waveform of the entry will |
| 584 |
loop as written in the entry repetition parameter. After the |
| 585 |
generation of an entry has completed, the last sample of the current |
| 586 |
entry or the first sample of the next entry is held until the next |
| 587 |
trigger is received. At the end of the entire sequence the execution |
| 588 |
will restart from the first entry. |
| 589 |
* ADVA<NCED>: it enables the “Advanced” mode. In this mode the |
| 590 |
execution of the sequence can be changed by using conditional and |
| 591 |
unconditional jumps (JUMPTO and GOTO commands) and dynamic jumps |
| 592 |
(PATTERN JUMP commands). |
| 593 |
|
| 594 |
The \\*RST command sets this parameter to CONTinuous.""", |
| 595 |
validator=strict_discrete_set, |
| 596 |
values=["CONTINUOUS", "CONT", "BURST", "BURS", "TCONTINUOUS", |
| 597 |
"TCON", "STEPPED", "STEP", "ADVANCED", "ADVA"] |
| 598 |
) |
| 599 |
|
| 600 |
burst_count = Instrument.control( |
| 601 |
"AWGControl:BURST?", |
| 602 |
"AWGControl:BURST %d", |
| 603 |
"""This property sets or queries the burst count parameter.""", |
| 604 |
validator=strict_range, |
| 605 |
dynamic=True |
| 606 |
) |
| 607 |
|
| 608 |
burst_count_max = Instrument.measurement( |
| 609 |
"AWGControl:BURST? MAXimum", |
| 610 |
"""This property queries the maximum burst count parameter.""", |
| 611 |
cast=int |
| 612 |
) |
| 613 |
|
| 614 |
burst_count_min = Instrument.measurement( |
| 615 |
"AWGControl:BURST? MINimum", |
| 616 |
"""This property queries the minimum burst count parameter.""", |
| 617 |
cast=int |
| 618 |
) |
| 619 |
|
| 620 |
sampling_rate = Instrument.control( |
| 621 |
"AWGControl:SRATe?", |
| 622 |
"AWGControl:SRATe %f", |
| 623 |
"""This property sets or queries the sample rate for the Sampling |
| 624 |
Clock.""", |
| 625 |
validator=strict_range, |
| 626 |
dynamic=True |
| 627 |
) |
| 628 |
|
| 629 |
sampling_rate_max = Instrument.measurement( |
| 630 |
"AWGControl:SRATe? MAXimum", |
| 631 |
"""This property queries the maximum sample rate for the Sampling |
| 632 |
Clock.""" |
| 633 |
) |
| 634 |
|
| 635 |
sampling_rate_min = Instrument.measurement( |
| 636 |
"AWGControl:SRATe? MINimum", |
| 637 |
"""This property queries the minimum sample rate for the Sampling |
| 638 |
Clock.""" |
| 639 |
) |
| 640 |
|
| 641 |
run_status = Instrument.measurement( |
| 642 |
"AWGControl:RSTATe?", |
| 643 |
"""This property returns the run state of the AWG. The possible values |
| 644 |
are: STOPPED, WAITING_TRIGGER, RUNNING""", |
| 645 |
values={"STOPPED": 0, "WAITING_TRIGGER": 1, "RUNNING": 2}, |
| 646 |
map_values=True |
| 647 |
) |
| 648 |
|
| 649 |
enabled = Instrument.control( |
| 650 |
"AWGControl:RSTATe?", "AWGControl:%s", |
| 651 |
"""A boolean property that enables the generation of signals.""", |
| 652 |
validator=strict_discrete_set, |
| 653 |
values={True: "RUN", False: "STOP"}, |
| 654 |
map_values=True, |
| 655 |
get_process=lambda v: "STOP" if v == 0 else "RUN" |
| 656 |
) |
| 657 |
|
| 658 |
trigger_source = Instrument.control( |
| 659 |
"TRIGger:SEQuence:SOURce?", "TRIGger:SEQuence:SOURce %s", |
| 660 |
"""This property sets or returns the instrument trigger source. The |
| 661 |
possible values are: |
| 662 |
|
| 663 |
* TIM<ER>: the trigger is sent at regular intervals. |
| 664 |
* EXT<ERNAL>: the trigger come from the external BNC connector. |
| 665 |
* MAN<UAL>: the trigger is sent via software or using the trigger |
| 666 |
button on front panel.""", |
| 667 |
validator=strict_discrete_set, |
| 668 |
values=["TIMER", "TIM", "EXTERNAL", "EXT", "MANUAL", "MAN"] |
| 669 |
) |
| 670 |
|
| 671 |
waveforms = property( |
| 672 |
lambda self: self._waveforms, |
| 673 |
doc="""This property returns a dict with all the waveform present |
| 674 |
in the instrument system (Wave. List). It is possible to modify the |
| 675 |
values, delete them or create new waveforms""") |
| 676 |
|
| 677 |
def trigger(self): |
| 678 |
"""Force a trigger event to occour.""" |
| 679 |
self.write("TRIGger:SEQuence:IMMediate") |
| 680 |
|
| 681 |
def save_file(self, |
| 682 |
file_name, |
| 683 |
data, |
| 684 |
path=None, |
| 685 |
override_existing=False): |
| 686 |
"""Write a string in a file in the instrument""" |
| 687 |
|
| 688 |
if path is not None: |
| 689 |
raise NotImplementedError("Specify path is not implemented") |
| 690 |
|
| 691 |
if file_name in [file.name |
| 692 |
for file in self.list_files(path=path) |
| 693 |
if file.type == '']: |
| 694 |
if override_existing: |
| 695 |
self.remove_file(file_name, path=path) |
| 696 |
else: |
| 697 |
raise ValueError("File already exist and override is disabled") |
| 698 |
|
| 699 |
self.adapter.write_binary_values( |
| 700 |
'MMEM:DATA "' + file_name + '", 0, ', |
| 701 |
data.encode("ASCII"), |
| 702 |
datatype='s') |
| 703 |
# HACK: Send an unuseful command to ensure the last command was |
| 704 |
# executed because if it is more than 1024 bytes it doesn't work |
| 705 |
self.wait_last() |
| 706 |
|
| 707 |
def remove_file(self, file_name, path=None): |
| 708 |
"""Remove a specified file""" |
| 709 |
|
| 710 |
if path is not None: |
| 711 |
raise NotImplementedError("Specify path is not implemented") |
| 712 |
|
| 713 |
if file_name not in [file.name |
| 714 |
for file in self.list_files(path=path) |
| 715 |
if file.type == '']: |
| 716 |
raise ValueError("File do not exist") |
| 717 |
|
| 718 |
self.write('MMEMORY:DELETE "' + file_name + '"') |
| 719 |
|
| 720 |
def list_files(self, path=None): |
| 721 |
"""Return a List of tuples with all file found in a directory. If the |
| 722 |
path is not specified the current directory will be used""" |
| 723 |
|
| 724 |
if path is not None: |
| 725 |
raise NotImplementedError("Specify path is not implemented") |
| 726 |
|
| 727 |
catalog = self.values("MMEMory:CATalog?") |
| 728 |
catalog = catalog[1:] |
| 729 |
|
| 730 |
FS_Element = namedtuple("FS_Element", "name type dimension") |
| 731 |
|
| 732 |
elements = [] |
| 733 |
for i in range(int(len(catalog) / 3)): |
| 734 |
elements.append(FS_Element(catalog[i * 3 + 0], |
| 735 |
catalog[i * 3 + 1], |
| 736 |
catalog[i * 3 + 2])) |
| 737 |
|
| 738 |
return elements |
| 739 |
|
| 740 |
class WaveformsLazyDict(abc.MutableMapping): |
| 741 |
"""This class inherit from MutableMapping in order to create a custom |
| 742 |
dict to lazy load, modify, delete and create instrument waveform.""" |
| 743 |
|
| 744 |
def __init__(self, parent): |
| 745 |
self.parent = parent |
| 746 |
self.reset() |
| 747 |
|
| 748 |
def __getitem__(self, key): |
| 749 |
"""Load data from instrument if not present""" |
| 750 |
if self._data[key] is None: |
| 751 |
self._data[key] = self._get_waveform(key) |
| 752 |
return self._data[key] |
| 753 |
|
| 754 |
def __setitem__(self, key, value): |
| 755 |
"""Create a new waveform from key and value""" |
| 756 |
|
| 757 |
if len(value) < 16: |
| 758 |
raise ValueError("The minimum waveform length is 16 samples") |
| 759 |
elif len(value) < 384 and len(value) % 16 != 0: |
| 760 |
raise ValueError("From 16 to 384 samples the granularity of" |
| 761 |
"the waveform is 16") |
| 762 |
|
| 763 |
class VoltageOutOfRangeError(Exception): |
| 764 |
pass |
| 765 |
|
| 766 |
if max(value) > self.parent.entries[1].channels[1].voltage_high_max: |
| 767 |
raise VoltageOutOfRangeError( |
| 768 |
f"{max(value)}V is higher than maximum possible voltage, " |
| 769 |
f"which is " |
| 770 |
f"{self.instrument.entries[1].channels[1].voltage_high_max}V") |
| 771 |
if min(value) < self.parent.entries[1].channels[1].voltage_low_min: |
| 772 |
raise VoltageOutOfRangeError( |
| 773 |
f"{min(value)}V is lower than minimum possible voltage, " |
| 774 |
f"which is " |
| 775 |
f"{self.instrument.entries[1].channels[1].voltage_low_min}V") |
| 776 |
|
| 777 |
self.parent.save_file(f"{key}.txt", |
| 778 |
"\n".join(map(str, value)), |
| 779 |
override_existing=True) |
| 780 |
|
| 781 |
try: |
| 782 |
del self[key] |
| 783 |
except KeyError: |
| 784 |
pass |
| 785 |
|
| 786 |
self.parent.write(f'WLISt:WAVeform:IMPort "{key}",' |
| 787 |
f'"{key}.txt",ANAlog') |
| 788 |
|
| 789 |
self.parent.wait_last() |
| 790 |
|
| 791 |
self.parent.remove_file(f"{key}.txt") |
| 792 |
|
| 793 |
self._data[key] = None |
| 794 |
return |
| 795 |
|
| 796 |
def __delitem__(self, key): |
| 797 |
"""When removing an element this method removes also the |
| 798 |
corresponding waveform in the instrument""" |
| 799 |
del self._data[key] |
| 800 |
self.parent.write(f'WLISt:WAVeform:DELete "{key}"') |
| 801 |
return |
| 802 |
|
| 803 |
def __iter__(self): |
| 804 |
try: |
| 805 |
for el in self._data: |
| 806 |
yield el |
| 807 |
except KeyError: |
| 808 |
return |
| 809 |
|
| 810 |
def __len__(self): |
| 811 |
return len(self._data) |
| 812 |
|
| 813 |
def __str__(self): |
| 814 |
"""Return a str without the waveforms points because it is useless |
| 815 |
and loads all waveforms uselessy""" |
| 816 |
return pprint.pformat({el: "Waveform Points" for el in self._data}) |
| 817 |
|
| 818 |
def reset(self): |
| 819 |
"""Reset the class reloading the waveforms from instrument""" |
| 820 |
waveforms_name = self.parent.values("WLISt:LIST?") |
| 821 |
self._data = {v: None for v in waveforms_name} |
| 822 |
|
| 823 |
def _get_waveform(self, waveform_name): |
| 824 |
"""Get the waveform point of a specified waveform""" |
| 825 |
|
| 826 |
bin_value = self.parent.adapter.connection.query_binary_values( |
| 827 |
'WLISt:WAVeform:DATA? "' + waveform_name + '"', |
| 828 |
header_fmt='ieee', |
| 829 |
datatype='h') |
| 830 |
|
| 831 |
return bin_value |
| 832 |
|
| 833 |
class DummyEntriesElements(abc.Sequence): |
| 834 |
"""Dummy List Class to list every sequencer entry. The content is |
| 835 |
loaded in real-time.""" |
| 836 |
|
| 837 |
def __init__(self, parent, number_of_channel): |
| 838 |
self.parent = parent |
| 839 |
self.num_ch = number_of_channel |
| 840 |
|
| 841 |
def resize(self, new_size): |
| 842 |
self.parent.write(f"SEQuence:LENGth {new_size}") |
| 843 |
|
| 844 |
def __getitem__(self, key): |
| 845 |
if key <= 0: |
| 846 |
raise IndexError("Entry numeration start from 1") |
| 847 |
if key > int(self.parent.values("SEQuence:LENGth?")[0]): |
| 848 |
raise IndexError("Index out of range") |
| 849 |
return SequenceEntry(self.parent, self.num_ch, key) |
| 850 |
|
| 851 |
def __len__(self): |
| 852 |
return int(self.parent.values("SEQuence:LENGth?")[0]) |
| 853 |
|
| 854 |
|
| 855 |
class SequenceEntry(Channel): |
| 856 |
"""Implementation of sequencer entry.""" |
| 857 |
|
| 858 |
def __init__(self, parent, number_of_channels, sequence_number): |
| 859 |
super().__init__(parent, sequence_number) |
| 860 |
self.number_of_channels = number_of_channels |
| 861 |
|
| 862 |
self.length_values = [self.length_min, self.length_max] |
| 863 |
self.loop_count_values = [self.loop_count_min, self.loop_count_max] |
| 864 |
|
| 865 |
for i in range(1, self.number_of_channels + 1): |
| 866 |
self.add_child(self.AnalogChannel, i, |
| 867 |
sequence_number=sequence_number) |
| 868 |
|
| 869 |
def insert_id(self, command): |
| 870 |
return command.format(ent=self.id) |
| 871 |
|
| 872 |
length = Instrument.control( |
| 873 |
"SEQuence:ELEM{ent}:LENGth?", |
| 874 |
"SEQuence:ELEM{ent}:LENGth %s", |
| 875 |
"""This property sets or returns the number of samples of the entry. |
| 876 |
""", |
| 877 |
validator=strict_range, |
| 878 |
dynamic=True |
| 879 |
) |
| 880 |
|
| 881 |
length_max = Instrument.measurement( |
| 882 |
"SEQuence:ELEM{ent}:LENGth? MAXimum", |
| 883 |
"""This property queries the maximum entry samples length.""", |
| 884 |
get_process=lambda v: int(v) |
| 885 |
) |
| 886 |
|
| 887 |
length_min = Instrument.measurement( |
| 888 |
"SEQuence:ELEM{ent}:LENGth? MINimum", |
| 889 |
"""This property queries the minimum entry samples length.""", |
| 890 |
get_process=lambda v: int(v) |
| 891 |
) |
| 892 |
|
| 893 |
loop_count = Instrument.control( |
| 894 |
"SEQuence:ELEM{ent}:LOOP:COUNt?", |
| 895 |
"SEQuence:ELEM{ent}:LOOP:COUNt %s", |
| 896 |
"""This property sets or returns the number of waveform repetitions for |
| 897 |
the entry. |
| 898 |
""", |
| 899 |
validator=strict_range, |
| 900 |
dynamic=True |
| 901 |
) |
| 902 |
|
| 903 |
loop_count_max = Instrument.measurement( |
| 904 |
"SEQuence:ELEM{ent}:LOOP:COUNt? MAXimum", |
| 905 |
"""This property queries the maximum number of waveform repetitions for |
| 906 |
the entry.""", |
| 907 |
get_process=lambda v: int(v) |
| 908 |
) |
| 909 |
|
| 910 |
loop_count_min = Instrument.measurement( |
| 911 |
"SEQuence:ELEM{ent}:LOOP:COUNt? MINimum", |
| 912 |
"""This property queries the minimum number of waveform repetitions for |
| 913 |
the entry.""", |
| 914 |
get_process=lambda v: int(v) |
| 915 |
) |
| 916 |
|
| 917 |
class AnalogChannel(Channel): |
| 918 |
"""Implementation of an analog channel for a single sequencer entry.""" |
| 919 |
|
| 920 |
def __init__(self, parent, id, sequence_number): |
| 921 |
super().__init__(parent, id) |
| 922 |
self.seq_num = sequence_number |
| 923 |
|
| 924 |
self.waveform_values = list(self.parent.parent.waveforms.keys()) |
| 925 |
self.calculate_voltage_range() |
| 926 |
|
| 927 |
def insert_id(self, command): |
| 928 |
return command.format(ent=self.seq_num, ch=self.id) |
| 929 |
|
| 930 |
voltage_amplitude = Instrument.control( |
| 931 |
"SEQuence:ELEM{ent}:AMPlitude{ch}?", |
| 932 |
"SEQuence:ELEM{ent}:AMPlitude{ch} %s", |
| 933 |
"""This property sets or returns the voltage peak-to-peak |
| 934 |
amplitude.""", |
| 935 |
validator=strict_range, |
| 936 |
dynamic=True |
| 937 |
) |
| 938 |
|
| 939 |
voltage_amplitude_max = Instrument.measurement( |
| 940 |
"SEQuence:ELEM{ent}:AMPlitude{ch}? MAXimum", |
| 941 |
"""This property queries the maximum amplitude voltage level that |
| 942 |
can be set.""" |
| 943 |
) |
| 944 |
|
| 945 |
voltage_amplitude_min = Instrument.measurement( |
| 946 |
"SEQuence:ELEM{ent}:AMPlitude{ch}? MINimum", |
| 947 |
"""This property queries the minimum amplitude voltage level that |
| 948 |
can be set.""" |
| 949 |
) |
| 950 |
|
| 951 |
voltage_offset = Instrument.control( |
| 952 |
"SEQuence:ELEM{ent}:OFFset{ch}?", |
| 953 |
"SEQuence:ELEM{ent}:OFFset{ch} %s", |
| 954 |
"""This property sets or returns the voltage offset.""", |
| 955 |
validator=strict_range, |
| 956 |
dynamic=True |
| 957 |
) |
| 958 |
|
| 959 |
voltage_offset_max = Instrument.measurement( |
| 960 |
"SEQuence:ELEM{ent}:OFFset{ch}? MAXimum", |
| 961 |
"""This property queries the maximum voltage offset that can be |
| 962 |
set.""" |
| 963 |
) |
| 964 |
|
| 965 |
voltage_offset_min = Instrument.measurement( |
| 966 |
"SEQuence:ELEM{ent}:OFFset{ch}? MINimum", |
| 967 |
"""This property queries the minimum voltage offset that can be |
| 968 |
set.""" |
| 969 |
) |
| 970 |
|
| 971 |
voltage_high = Instrument.control( |
| 972 |
"SEQuence:ELEM{ent}:VOLTage:HIGH{ch}?", |
| 973 |
"SEQuence:ELEM{ent}:VOLTage:HIGH{ch} %s", |
| 974 |
"""This property sets or returns the high voltage level of the |
| 975 |
waveform.""", |
| 976 |
validator=strict_range, |
| 977 |
dynamic=True |
| 978 |
) |
| 979 |
|
| 980 |
voltage_high_max = Instrument.measurement( |
| 981 |
"SEQuence:ELEM{ent}:VOLTage:HIGH{ch}? MAXimum", |
| 982 |
"""This property queries the maximum high voltage level of the |
| 983 |
waveform that can be set to the output waveform.""" |
| 984 |
) |
| 985 |
|
| 986 |
voltage_high_min = Instrument.measurement( |
| 987 |
"SEQuence:ELEM{ent}:VOLTage:HIGH{ch}? MINimum", |
| 988 |
"""This property queries the minimum high voltage level of the |
| 989 |
waveform that can be set to the output waveform.""" |
| 990 |
) |
| 991 |
|
| 992 |
voltage_low = Instrument.control( |
| 993 |
"SEQuence:ELEM{ent}:VOLTage:LOW{ch}?", |
| 994 |
"SEQuence:ELEM{ent}:VOLTage:LOW{ch} %s", |
| 995 |
"""This property sets or returns the low voltage level of the |
| 996 |
waveform.""", |
| 997 |
validator=strict_range, |
| 998 |
dynamic=True |
| 999 |
) |
| 1000 |
|
| 1001 |
voltage_low_max = Instrument.measurement( |
| 1002 |
"SEQuence:ELEM{ent}:VOLTage:LOW{ch}? MAXimum", |
| 1003 |
"""This property queries the maximum low voltage level of the |
| 1004 |
waveform that can be set to the output waveform.""" |
| 1005 |
) |
| 1006 |
|
| 1007 |
voltage_low_min = Instrument.measurement( |
| 1008 |
"SEQuence:ELEM{ent}:VOLTage:LOW{ch}? MINimum", |
| 1009 |
"""This property queries the minimum low voltage level of the |
| 1010 |
waveform that can be set to the output waveform.""" |
| 1011 |
) |
| 1012 |
|
| 1013 |
waveform = Instrument.control( |
| 1014 |
"SEQuence:ELEM{ent}:WAVeform{ch}?", |
| 1015 |
"SEQuence:ELEM{ent}:WAVeform{ch} %s", |
| 1016 |
"""This property sets or returns the waveform. It’s possible select |
| 1017 |
a waveform only from those in the waveform list. In waveform list |
| 1018 |
are already present 10 predefined waveform: Sine, Ramp, Square, |
| 1019 |
Sync, DC, Gaussian, Lorentz, Haversine, Exp_Rise and Exp_Decay but |
| 1020 |
user can import in the list others customized waveforms.""", |
| 1021 |
validator=strict_discrete_set, |
| 1022 |
set_process=lambda v: f"\"{v}\"", |
| 1023 |
dynamic=True |
| 1024 |
) |
| 1025 |
|
| 1026 |
def calculate_voltage_range(self): |
| 1027 |
self.voltage_amplitude_values = [self.voltage_amplitude_min, |
| 1028 |
self.voltage_amplitude_max] |
| 1029 |
|
| 1030 |
self.voltage_offset_values = [self.voltage_offset_min, |
| 1031 |
self.voltage_offset_max] |
| 1032 |
|
| 1033 |
self.voltage_high_values = [self.voltage_high_min, |
| 1034 |
self.voltage_high_max] |
| 1035 |
|
| 1036 |
self.voltage_low_values = [self.voltage_low_min, |
| 1037 |
self.voltage_low_max] |