Debian Codegraph @

src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf

raw
1 # This file is part of PulseAudio.
2 #
3 # PulseAudio is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU Lesser General Public License as
5 # published by the Free Software Foundation; either version 2.1 of the
6 # License, or (at your option) any later version.
7 #
8 # PulseAudio is distributed in the hope that it will be useful, but
9 # WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # General Public License for more details.
12 #
13 # You should have received a copy of the GNU Lesser General Public License
14 # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
15
16 ; Creative Sound Blaster Omni Surround 5.1
17 ;
18 ; This config supports Linux 4.3-rc1+.
19 ; By default there are some non-existing (physically) inputs and outputs that
20 ; are not present in this config.
21 ; Also in addition to natively supported modes (such as stereo, 5.1 and stereo
22 ; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0.
23 ;
24 ; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode.
25 ;
26 ; See default.conf for an explanation on the directives used here.
27
28 [General]
29 auto-profiles = no
30
31 [Mapping analog-stereo-input]
32 device-strings = hw:%f
33 channel-map = left,right
34 paths-input = analog-input-mic analog-input-linein
35 direction = input
36
37 [Mapping analog-stereo-output]
38 device-strings = front:%f
39 channel-map = left,right
40 paths-output = analog-output
41 direction = output
42
43 [Mapping analog-surround-21]
44 device-strings = surround51:%f
45 channel-map = front-left,front-right,aux1,aux2,aux3,lfe
46 paths-output = analog-output
47 direction = output
48
49 [Mapping analog-surround-40]
50 device-strings = surround51:%f
51 channel-map = front-left,front-right,rear-left,rear-right
52 paths-output = analog-output
53 direction = output
54
55 [Mapping analog-surround-41]
56 device-strings = surround51:%f
57 channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe
58 paths-output = analog-output
59 direction = output
60
61 [Mapping analog-surround-50]
62 device-strings = surround51:%f
63 channel-map = front-left,front-right,rear-left,rear-right,front-center
64 paths-output = analog-output
65 direction = output
66
67 [Mapping analog-surround-51]
68 device-strings = surround51:%f
69 channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
70 paths-output = analog-output
71 direction = output
72
73 [Mapping iec958-stereo]
74 device-strings = iec958:%f
75 channel-map = left,right
76 paths-output = iec958-stereo-output
77 direction = output
78
79 [Profile output:analog-stereo-output+input:analog-stereo-input]
80 output-mappings = analog-stereo-output
81 input-mappings = analog-stereo-input
82 priority = 7
83
84 [Profile output:analog-surround-21+input:analog-stereo-input]
85 output-mappings = analog-surround-21
86 input-mappings = analog-stereo-input
87 priority = 6
88
89 [Profile output:analog-surround-40+input:analog-stereo-input]
90 output-mappings = analog-surround-40
91 input-mappings = analog-stereo-input
92 priority = 5
93
94 [Profile output:analog-surround-41+input:analog-stereo-input]
95 output-mappings = analog-surround-41
96 input-mappings = analog-stereo-input
97 priority = 4
98
99 [Profile output:analog-surround-50+input:analog-stereo-input]
100 output-mappings = analog-surround-50
101 input-mappings = analog-stereo-input
102 priority = 3
103
104 [Profile output:analog-surround-51+input:analog-stereo-input]
105 output-mappings = analog-surround-51
106 input-mappings = analog-stereo-input
107 priority = 2
108
109 [Profile output:iec958-stereo+input:analog-stereo-input]
110 output-mappings = iec958-stereo
111 input-mappings = analog-stereo-input
112 priority = 1